fs-laser preparation of half grid specimens for atom probe tomography and transmission electron microscopy

For atom probe tomography (APT) and transmission electron microscopy (TEM) half grids are commonly applied as specimen carriers, serving as mount for focused ion beam (FIB) processed lift-outs. This technical note presents an alternative way to fabricate half grids directly from the material to be investigated using femtosecond (fs)-laser ablation. After cutting ∼200 µm thin in-plane and cross-plane slices from a TiN coated cemented carbide substrate using a precision cutting saw, two different half grid geometries, one suitable for APT and the other for TEM, were cut via fs-laser processing. Freestanding posts for APT were further sharpened and the areas intended for TEM were thinned top-down using the fs-laser system followed by final annular FIB milling of the APT and thinning of the TEM specimens. For proof of concept, the TiN APT half grid specimens in in- and cross-plane direction were successfully measured in voltage and laser-assisted mode, utilizing a local electrode atom probe, while electron transparency of the in- and cross-plane TEM half grid specimens was proven using a scanning electron microscope equipped with a scanning transmission electron microscopy (STEM) detector. The herein presented method is simple, fast and omits the necessity of a lift-out, reducing the complexity of FIB operations. Additionally, a frequently considered weak point of APT lift-out specimens, the Pt weld between specimen and half grid or microtip coupon is avoided, whilst a wide range of materials can be processed and consumables consumption is reduced. Thus, this work clearly demonstrates the great potential of fs-laser processing for APT and TEM specimen preparation.