Influence of Si(111) substrate off-cut on AlN film crystallinity grown by magnetron sputter epitaxy

The increasing demand for More than Moore devices requires epitaxy technology to keep up with the discovery and deployment of new semiconductors. An emerging technology for cost-effective, device-quality growth is magnetron sputter epitaxy, though detailed studies on the process itself remain scarce. Here, we report an extensive study on the correlation between the substrate off-cut and film quality in AlN-on-Si heteroepitaxy. Controlled reactive pulsed magnetron sputtering is used to grow epitaxial AlN(0001) films on in situ Ar plasma etched off-cut Si(111) substrates with growth rates above 1.5 nm/s. Substrate off-cut angles in the range of 0.02°-0.30° are investigated and precisely determined by high-resolution x-ray diffraction. Structural examination of the AlN films is carried out by transmission electron microscopy and high-resolution x-ray diffraction. The AlN/Si interface is well-defined and two types of AlN domains with epitaxial relationships are observed. The formation of secondary rotation domains deteriorates the crystal quality substantially. Substrates with small off-cuts, ideally no off-cut substrates, appear to be crucial for suppressing the formation of secondary domains and further result in a better overall crystal quality of AlN films. We discuss this effect in relation to the AlN/Si interface, the substrate pre-treatment, and nucleation.