Dr.

Günther, Daniel

Filters
Reset filters

Settings
Now showing 1 - 3 of 3
  • Publication
    Advanced Procedures for Series Production with 3D-Printed Core Packages
    ( 2023)
    Erhard, Patricia
    ;
    Hartmann, Christoph
    ;
    Li, Rui
    ;
    Volk, Wolfram
    ;
    Günther, Daniel
    The application of additive-manufactured cores and molds is of great interest for complex cast components. Nevertheless, several challenges still exist in utilizing binder jetting in the multi-step additive manufacturing process for foundry applications to its fullest extent. This contribution shows methods that facilitate the use of 3D-printed sand molds and cores in casting series applications. The binder jetting process itself is assessed from an overall process chain perspective to highlight the benefits of its application in series production. The challenges associated with automating mold cleaning for highly complex casting contours are depicted. In particular, employing the method of cleanable mold partitioning is shown to enhance the automation level of the overall process. Mold design tailored to 3D printing is demonstrated to contribute to overall cost and time savings in enhanced core packages. Topology-optimized, lightweight part designs involving complex freeform surfaces may require mold partitioning associated with laborious burr removal processes. A new approach in answer to the shortage of skilled workers in the harsh and hazardous foundry environment is shown. Implementing motion tracking technology is demonstrated to enable economical automated burr removal for minor quantities or high variant diversity in the future foundry. All the methods shown are of great importance for introducing printed core packages into series production.
  • Publication
    Simulation of Binder Infiltration in Additive Manufacturing of Sand Molds
    ( 2023)
    Erhard, Patricia
    ;
    Tanjavooru, Vivek Teja
    ;
    Hartmann, Christoph
    ;
    Bosch, Lucas Valentin van den
    ;
    Seidel, Alexander
    ;
    Volk, Wolfram
    ;
    Günther, Daniel
    This article proposes a computational fluid dynamics approach to simulate binder infiltration in 3D printing of sand molds using OpenFOAM facilitating the identification of suitable levers for application-specific material and process developments. A method for randomly generating powder bulks of designated powder size distributions (PSD) and procedures for automated analysis of the infiltration profile and volume are introduced. Simulation is utilized to investigate binder infiltration using different droplet spacings, representing different printheads’ resolutions. The apparent particle size at the exact location of the droplets’ impact, the droplets’ landing position in relation to the respective surface topography, and thus the statistical appearance of particle formations appear to be influencing the infiltration profile. High-speed camera observations show the plausibility of the predicted infiltration kinetics. An exemplary use case compares the predicted infiltration profiles to the compressive strength of specimens printed from silica sand with low binder contents. Simulation predicts an average infiltration of 250 μm that presumably achieves reliable bonding for layer thicknesses up to 365 μm. A decrease in strength with increasing layer thickness at constant binder contents can be found in the experiment – at layer thicknesses above 350 μm, only minor strengths are achieved.
  • Publication
    Characterization of Slurry-Cast Layer Compounds for 3D Printing of High Strength Casting Cores
    ( 2021)
    Erhard, Patricia
    ;
    Angenoorth, Jan
    ;
    Vogt, Joachim
    ;
    Spiegel, Johannes
    ;
    Ettemeyer, Florian
    ;
    Volk, Wolfram
    ;
    Günther, Daniel
    Additive manufacturing of casting cores and molds is state of the art in industrial application today. However, improving the properties of chemically bonded casting cores regarding temperature stability, bending strength, and surface quality is still a major challenge. The process of slurry-based 3D printing allows the fabrication of dense structures and therefore sinterable casting cores. This paper presents a study of the slurry-based fabrication of ceramic layer compounds focusing on the drying process and the achievable properties in slurry-based 3D printing of casting cores. This study aims at contributing to a better understanding of the interrelations between the drying conditions in the 3D printing process and the properties of sintered specimens relating thereto. The drying intensity influenced by an IR heater as well as the drying periods are varied for layer thicknesses of 50, 75, and 100 µm. Within this study, a process window applicable for 3D printing of sinterable casting cores is identified and further indications are given for optimization potentials. At layer heights of 75 µm, bending strengths between ~8 and 11 MPa as well as densities of around 50% of the theoretical density were achieved. Since the mean roughness depth Rz is determined to be <30 µm in plane, an application of slurry-based 3D printing in investment casting is conceivable.