Dr.-Ing.

Gruna, Robin

Filters
Reset filters

Settings
Now showing 1 - 10 of 22
  • Publication
    A survey of the state of the art in sensor-based sorting technology and research
    ( 2024)
    Maier, Georg
    ;
    Gruna, Robin
    ;
    Längle, Thomas
    ;
    Beyerer, Jürgen
    Sensor-based sorting describes a family of systems that enable the removal of individual objects from a material stream. The technology is widely used in various industries such as agriculture, food, mining, and recycling. Examples of sorting tasks include the removal of fungus-infested grains, the enrichment of copper content in copper mining or the sorting of plastic waste according to the type of plastic. Sorting decisions are made based on information acquired by one or more sensors. A particular strength of the technology is the flexibility in sorting decisions, which is achieved by using various sensors and programming the data analysis. However, a comprehensive understanding of the process is necessary for the development of new sorting systems that can address previously unresolved tasks. This survey is aimed at innovative researchers and practitioners who are unfamiliar with sensor-based sorting or have only encountered certain aspects of the overall process. The references provided serve as starting points for further exploration of specific topics.
  • Publication
    Sensor-based characterization of construction and demolition waste at high occupancy densities using synthetic training data and deep learning
    ( 2024)
    Kronenwett, Felix
    ;
    Maier, Georg
    ;
    Leiss, Norbert
    ;
    Gruna, Robin
    ;
    Thome, Volker
    ;
    Längle, Thomas
    Sensor-based monitoring of construction and demolition waste (CDW) streams plays an important role in recycling (RC). Extracted knowledge about the composition of a material stream helps identifying RC paths, optimizing processing plants and form the basis for sorting. To enable economical use, it is necessary to ensure robust detection of individual objects even with high material throughput. Conventional algorithms struggle with resulting high occupancy densities and object overlap, making deep learning object detection methods more promising. In this study, different deep learning architectures for object detection (Region-based CNN/Region-based Convolutional Neural Network (Faster R-CNN), You only look once (YOLOv3), Single Shot MultiBox Detector (SSD)) are investigated with respect to their suitability for CDW characterization. A mixture of brick and sand-lime brick is considered as an exemplary waste stream. Particular attention is paid to detection performance with increasing occupancy density and particle overlap. A method for the generation of synthetic training images is presented, which avoids time-consuming manual labelling. By testing the models trained on synthetic data on real images, the success of the method is demonstrated. Requirements for synthetic training data composition, potential improvements and simplifications of different architecture approaches are discussed based on the characteristic of the detection task. In addition, the required inference time of the presented models is investigated to ensure their suitability for use under real-time conditions.
  • Publication
    Simulation study and experimental validation of a neural network-based predictive tracking system for sensor-based sorting
    ( 2023)
    Maier, Georg
    ;
    Reith-Braun, Marcel
    ;
    Bauer, Albert
    ;
    Gruna, Robin
    ;
    Pfaff, Florian
    ;
    Kruggel-Emden, Harald
    ;
    Längle, Thomas
    ;
    Hanebeck, Uwe D.
    ;
    Beyerer, Jürgen
    Sensor-based sorting offers cutting-edge solutions for separating granular materials. The line-scanning sensors currently in use in such systems only produce a single observation of each object and no data on its movement. According to recent studies, using an area-scan camera has the potential to reduce both characterization and separation error in a sorting process. A predictive tracking approach based on Kalman filters makes it possible to estimate the followed paths and parametrize a unique motion model for each object using a multiobject tracking system. While earlier studies concentrated on physically-motivated motion models, it has been demonstrated that novel machine learning techniques produce predictions that are more accurate. In this paper, we describe the creation of a predictive tracking system based on neural networks. The new algorithm is applied to an experimental sorting system and to a numerical model of the sorter. Although the new approach does not yet fully reach the achieved sorting quality of the existing approaches, it allows the use of the general method without requiring expert knowledge or a fundamental understanding of the parameterization of the particle motion model.
  • Publication
    Benchmarking a DEM‐CFD Model of an Optical Belt Sorter by Experimental Comparison
    ( 2023)
    Bauer, Albert
    ;
    Maier, Georg
    ;
    Reith-Braun, Marcel
    ;
    Kruggel-Emden, Harald
    ;
    Pfaff, Florian
    ;
    Gruna, Robin
    ;
    Hanebeck, Uwe
    ;
    Längle, Thomas
    A DEM-CFD (discrete element method - computational fluid dynamics) model of an optical belt sorter was extensively compared with experiments of a laboratory-scale sorter to assess the model's accuracy. Brick and sand-lime brick were considered as materials. First, the transport characteristics on the conveyor belt, involving mass flow, lateral particle distribution and proximity, were compared. Second, sorting results were benchmarked for varying mixture proportions at differing mass flows. It was found that the numerical model is able to reproduce the experimental results with high accuracy.
  • Publication
    GridSort: Image-based Optical Bulk Material Sorting Using Convolutional LSTMs
    ( 2023)
    Reith-Braun, Marcel
    ;
    Bauer, Albert
    ;
    Staab, Maximilian
    ;
    Pfaff, Florian
    ;
    Maier, Georg
    ;
    Gruna, Robin
    ;
    Längle, Thomas
    ;
    Beyerer, Jürgen
    ;
    Kruggel-Emden, Harald
    ;
    Hanebeck, Uwe D.
    Optical sorters separate particles of different classes by first detecting them while they are transported, e.g., on a conveyor belt, and subsequently bursting out particles of undesired classes using compressed air nozzles. Currently, the most promising results are achieved by predictive tracking, a multitarget tracking approach based on extracted midpoints from area-scan camera images that analyzes the particles’ motion and activates the nozzles accordingly. However, predictive tracking requires expert knowledge for setup and preceding object detection. Moreover, particle shapes are only considered implicitly, and the need to solve an association problem rises the computational complexity of the algorithm. In this paper, we present GridSort, an image-based approach that forecasts the scene at the nozzle array using a convolutional long short-term memory neural network and subsequently extracts nozzle activations, thus circumventing the aforementioned weaknesses. We show how GridSort can be trained in an unsupervised fashion and evaluate it using a coupled discrete element–computational fluid dynamics simulation of an optical sorter. We compare our method with predictive tracking in terms of sorting accuracy and demonstrate that it is an easy-to-apply alternative while achieving state-of-the-art results.
  • Publication
    Towards a feed material adaptive optical belt sorter: A simulation study utilizing a DEM-CFD approach
    ( 2022-09-09)
    Bauer, Albert
    ;
    Maier, Georg
    ;
    Reith-Braun, Marcel
    ;
    Kruggel-Emden, Harald
    ;
    Pfaff, Florian
    ;
    Gruna, Robin
    ;
    Hanebeck, Uwe
    ;
    Längle, Thomas
    In this investigation, a DEM-CFD model of an optical belt sorter is modified to become adaptive to varying belt speeds. For that, the positions and orientations of the nozzle bar and collecting containers are rearranged. Also, the duration of nozzle activation and optimal position of particle ejection are adjusted. For the derivation of optimal velocity-dependent parameters, a two-dimensional model is derived and optimized as a pre-processing step. The derived parameters are applied to the three-dimensional DEM-CFD model. Two optically distinguishable types of demolition waste materials are considered. All conveyor belt velocities are investigated with instantaneously and lagged activated nozzles, which represent fast and realistic triggered nozzle activations. The application of optimized sorting setups shows promising sorting results for a broad range of conveyor belt velocities. The obtained results are discussed in terms of their feasibility in being applied to real optical belt sorters.
  • Publication
    Handheld spectral sensing devices should not mislead consumers as far as non-authentic food is concerned: A case study with adulteration of milk powder
    ( 2022)
    Delatour, Thierry
    ;
    Becker, Florian
    ;
    Krause, Julius
    ;
    Romero, Roman
    ;
    Gruna, Robin
    ;
    Längle, Thomas
    ;
    Panchaud, Alexandre
    With the rising trend of consumers being offered by start-up companies portable devices and applications for checking quality of purchased products, it appears of paramount importance to assess the reliability of miniaturized sensors embedded in such devices. Here, eight sensors were assessed for food fraud applications in skimmed milk powder. The performance was evaluated with dry- and wet-blended powders mimicking adulterated materials by addition of either ammonium sulfate, semicarbazide, or cornstarch in the range 0.5-10% of profit. The quality of the spectra was assessed for an adequate identification of the outliers prior to a deep assessment of performance for both non-targeted (soft independent modelling of class analogy, SIMCA) and targeted analyses (partial least square regression with orthogonal signal correction, OPLS). Here, we show that the sensors have generally difficulties in detecting adulterants at ca. 5% supplementation, and often fail in achieving adequate specificity and detection capability. This is a concern as they may mislead future users, particularly consumers, if they are intended to be developed for handheld devices available publicly in smartphone-based applications. Full article(This article belongs to the Special Issue Rapid Detection Methods for Food Fraud and Food Contaminants Series II).
  • Publication
    Mixture of Experts of Neural Networks and Kalman Filters for Optical Belt Sorting
    ( 2022)
    Thumm, Jakob
    ;
    Reith-Braun, Marcel
    ;
    Pfaff, Florian
    ;
    Hanebeck, Uwe D.
    ;
    Flitter, Merle
    ;
    Maier, Georg
    ;
    Gruna, Robin
    ;
    Längle, Thomas
    ;
    Bauer, Albert
    ;
    Kruggel-Emden, Harald
    In optical sorting of bulk material, the composition of particles may frequently change. State-of-the-art sorting approaches rely on tuning physical models of the particle motion. The aim of this work is to increase the prediction accuracy in complex, fast-changing sorting scenarios with data-driven approaches. We propose two neural network (NN) experts for accurate prediction of a priori known particle types. To handle the large variety of particle types that can occur in real-world sorting scenarios, we introduce a simple but effective mixture of experts approach that combines NNs with hand-crafted motion models. Our new method not only improves the prediction accuracy for bulk material consisting of many particle classes, but also proves to be very adaptive and robust to new particle types.
  • Publication
    SmartSpectrometer - Embedded Optical Spectroscopy for Applications in Agriculture and Industry
    ( 2021)
    Krause, Julius
    ;
    Grüger, Heinrich
    ;
    Gebauer, Lucie
    ;
    Zheng, Xiaorong
    ;
    Knobbe, Jens
    ;
    Pügner, Tino
    ;
    Kicherer, Anna
    ;
    Gruna, Robin
    ;
    Längle, Thomas
    ;
    Beyerer, Jürgen
    The ongoing digitization of industry and agriculture can benefit significantly from optical spectroscopy. In many cases, optical spectroscopy enables the estimation of properties such as substance concentrations and compositions. Spectral data can be acquired and evaluated in real time, and the results can be integrated directly into process and automation units, saving resources and costs. Multivariate data analysis is needed to integrate optical spectrometers as sensors. Therefore, a spectrometer with integrated artificial intelligence (AI) called SmartSpectrometer and its interface is presented. The advantages of the SmartSpectrometer are exemplified by its integration into a harvesting vehicle, where quality is determined by predicting sugar and acid in grapes in the field.
  • Publication
    Experimental Evaluation of a Novel Sensor-Based Sorting Approach Featuring Predictive Real-Time Multiobject Tracking
    ( 2021)
    Maier, Georg
    ;
    Pfaff, Florian
    ;
    Pieper, Christoph
    ;
    Gruna, Robin
    ;
    Noack, Benjamin
    ;
    Kruggel-Emden, Harald
    ;
    Längle, Thomas
    ;
    Hanebeck, Uwe D.
    ;
    Wirtz, Siegmar
    ;
    Scherer, Viktor
    ;
    Beyerer, Jürgen
    Sensor-based sorting is a machine vision application that has found industrial application in various fields. An accept-or-reject task is executed by separating a material stream into two fractions. Current systems use line-scanning sensors, which is convenient as the material is perceived during transportation. However, line-scanning sensors yield a single observation of each object and no information about their movement. Due to a delay between localization and separation, assumptions regarding the location and point in time for separation need to be made based on the prior localization. Hence, it is necessary to ensure that all objects are transported at uniform velocities. This is often a complex and costly solution. In this paper, we propose a new method for reliably separating particles at non-uniform velocities. The problem is transferred from a mechanical to an algorithmic level. Our novel advanced image processing approach includes equipping the sorter with an area-scan camera in combination with a real-time multiobject tracking system, which enables predictions of the location of individual objects for separation. For the experimental validation of our approach, we present a modular sorting system, which allows comparing sorting results using a line-scan and area-scan camera. Results show that our approach performs reliable separation and hence increases sorting efficiency.