Options
Fraunhofer-Institut für Optronik, Systemtechnik und Bildauswertung IOSB
Now showing
1 - 3 of 3
-
PublicationHigh-pulse-energy actively Q-switched polarization-maintaining Tm3+-doped silica fiber laser( 2020)
;Forster, PatrickA diode-pumped Q-switched thulium-doped fiber laser is reported providing 43 ns short pulses with pulse energies of 800 µJ at a wavelength of 2050 nm. -
PublicationHigh-pulse-energy Q-switched Ho3+:YAG laser( 2020)
;Büker, H. ;Braesicke, P.We report on a high-energy Ho3+:YAG laser with a maximum average power of 20.1W at a central wavelength of 2.09µm and M2 < 1.5. In Q-switched operation a maximum pulse energy of 15mJ at 700Hz repetition rate was achieved. -
Publication55 W actively Q-switched single oscillator Tm3+, Ho3+-codoped silica polarization maintaining 2.09 µm fiber laser( 2019)
;Dalloz, Nicolas ;Robin, Thierry ;Cadier, BenoîtHildenbrand-Dhollande, AnneA bidirectional 793 nm diode-pumped actively Q-switched Tm3+, Ho3+-codoped silica polarization-maintaining (PM) double-clad (DC) fiber laser is reported. With this fiber laser, 55 W of average output power with 100 ns pulse width at 200 kHz repetition rate and 2.09 µm wavelength is obtained. The pump power injection with end-caps fusion-spliced on fiber tips provides good power stability (< 1.1%) and beam quality factors (M2 < 1.7). The fiber laser output beam polarization factor is 97.5%. At 55 W, no thermal-induced damage is observed on any optical element, and power scaling of the laser is only pump-power-limited in the range of the total available pump power (180 W).