Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik IPK

Filters

8 1
Reset filters

Settings
Now showing 1 - 10 of 55
  • Publication
    High-power laser beam welding for thick section steels - new perspectives using electromagnetic systems
    ( 2022)
    Rethmeier, M.
    ;
    Gumenyuk, A.
    ;
    Bachmann, M.
    In recent years, it was shown that the introduction of additional oscillating and permanent magnetic fields to laser beam and laser-arc hybrid welding can bring several beneficial effects. Examples are a contactless weld pool support for metals of high thickness suffering from severe drop-out when being welded conventionally or an enhanced stirring to improve the mixing of added filler material in the depth of the weld pool to guarantee homogeneous resulting mechanical properties of the weld. The latest research results show the applicability to various metal types over a wide range of thicknesses and welding conditions. The observations made were demonstrated in numerous experimental studies and a deep understanding of the interaction of the underlying physical mechanisms was extracted from numerical calculations.
  • Publication
    Investigation of the Extrapolation Capability of an Artificial Neural Network Algorithm in Combination with Process Signals in Resistance Spot Welding of Advanced High-Strength Steels
    ( 2021)
    El-Sari, Bassel
    ;
    Biegler, Max
    ;
    Rethmeier, Michael
    Resistance spot welding is an established joining process for the production of safety-relevant components in the automotive industry. Therefore, consecutive process monitoring is essential to meet the high quality requirements. Artificial neural networks can be used to evaluate the process parameters and signals, to ensure individual spot weld quality. The predictive accuracy of such algorithms depends on the provided training data set, and the prediction of untrained data is challenging. The aim of this paper was to investigate the extrapolation capability of a multi-layer perceptron model. That means, the predictive performance of the model was tested with data that clearly differed from the training data in terms of material and coating composition. Therefore, three multi-layer perceptron regression models were implemented to predict the nugget diameter from process data. The three models were able to predict the training datasets very well. The models, which were provided with features from the dynamic resistance curve predicted the new dataset better than the model with only process parameters. This study shows the beneficial influence of process signals on the predictive accuracy and robustness of artificial neural network algorithms. Especially, when predicting a data set from outside of the training space.
  • Publication
    The Effects of HLAW Parameters for One Side T-Joints in 15 mm Thickness Naval Steel
    ( 2021)
    Churiaque, C.
    ;
    Sánchez-Amaya, J.M.
    ;
    Porrúa-Lara, M.
    ;
    Gumenyuk, A.
    ;
    Rethmeier, M.
    The present contribution is the first research reporting full penetration HLAW joints in 15 mm thick EH36 steel butt T-welds with square grooves on 2F welding position by single-sided welding. The effects of welding parameters were investigated to increase the quality of the joints. Conditions leading to defect-free full penetration welds fulfilling naval regulations includes a laser power of 12.5 kW, a welding speed of 1.6 m/min and the vertical laser offset distance from the flange of 1 mm. Advanced characterization of selected welds included a microstructural identification by optical microscopy, SEM, and XRD, revealing the presence of acicular, polygonal and Widmanstätten ferrite, lath martensite, and some retained austenite at FZ. Hardness and microhardness mapping tests showed values of 155 HV at base metal and 200 to 380 HV at the fusion zone connecting the web to the flange.
  • Publication
    Numerical Analysis of the Partial Penetration High Power Laser Beam Welding of Thick Sheets at High Process Speeds
    ( 2021)
    Artinov, A.
    ;
    Meng, X.
    ;
    Bachmann, M.
    ;
    Rethmeier, M.
    The present work is devoted to the numerical analysis of the high-power laser beam welding of thick sheets at different welding speeds. A three-dimensional transient multi-physics numerical model is developed, allowing for the prediction of the keyhole geometry and the final penetration depth. Two ray tracing algorithms are implemented and compared, namely a standard ray tracing approach and an approach using a virtual mesh refinement for a more accurate calculation of the reflection point. Both algorithms are found to provide sufficient accuracy for the prediction of the keyhole depth during laser beam welding with process speeds of up to 1.5 m min-1. However, with the standard algorithm, the penetration depth is underestimated by the model for a process speed of 2.5 m min-1 due to a trapping effect of the laser energy in the top region. In contrast, the virtually refined ray tracing approach results in high accuracy results for process speeds of both 1.5 m min-1 and 2.5 m min-1. A detailed study on the trapping effect is provided, accompanied by a benchmark including a predefined keyhole geometry with typical characteristics for the high-power laser beam welding of thick plates at high process speed, such as deep keyhole, inclined front keyhole wall, and a hump.
  • Publication
    Schweißen unter Zug - LME-Eingangsprüfung für die Autoindustrie
    ( 2021)
    El-Sari, Bassel
    ;
    Biegler, Max
    ;
    Rethmeier, Michael
    Der Trend zum Leichtbau und die Transformation zur E-Mobilität in der Automobilindustrie befeuern die Entwicklung neuer hochfester Stähle für den Karosseriebau. Derartige Werkstoffe sind beim Widerstandspunktschweißen besonders rissanfällig (LME). Das Schweißen unter Zug stellt eine effektive Methode um die LME-Anfälligkeit unterschiedlicher Werkstoffe qualitativ zu bestimmen.
  • Publication
    Selection of diamond coated silicon nitrides for use as ceramic end mills when machining glass and carbon fiber reinforced plastics
    ( 2021)
    Stawiszynski, Bartek
    ;
    Protz, Falk
    ;
    Uhlmann, Eckart
    The machining of advanced materials is challenging the tooling technology. To cope this, new cutting materials and geometries are developed. In this case, four types of silicon nitride based ceramics are investigated after coating with CVD-diamond for the use as ceramic end mills. To assess the wear resistance, model wear tests and damage evaluation were carried out and evaluated. After subsequent summary of the results, ceramic and cemented carbide substrate were selected for milling of glass and carbon fiber reinforced plastic (GFRP/CFRP) The determined force distribution and wear properties of the tools are presented and discussed. The diamond coated substrates are qualified by their wear profile and the measured constant cutting forces for use in the machining of GFRP/CFRP. Finally, the crack formation progress for diamond coated silicon nitrides when machining glass and carbon fiber reinforced plastics was demonstrated.
  • Publication
    Shielded metal arc welding of 9%Ni steel using matching ferritic filler metal
    ( 2021)
    El-Batahgy, A.
    ;
    Saiyah, A.
    ;
    Khafagi, S.
    ;
    Gumenyuk, A.
    ;
    Gook, S.
    ;
    Rethmeier, M.
    Motivated by the tensile strength loss of 9%Ni steel arc welded joints made using Ni-based austenitic filler metals, the feasibility of maintaining the tensile strength using matching ferritic filler metal has been demonstrated. In comparison with shielded metal arc welded joint made using Ni-based austenitic electrode ENiCrMo-6, higher tensile strength comparable to that of the base metal was obtained using matching ferritic electrode. Besides, sufficient impact toughness energies with much lower mismatch were obtained for weld metal and heat-affected zone. Welded joint with a lower mechanical mismatching is of considerable importance for achieving acceptable combination of tensile strength and impact toughness. A better combination of these mechanical properties is ensured by applying a post weld heat treatment.
  • Publication
    Avoidance of liquid metal embrittlement during resistance spot welding by heat input dependent hold time adaption
    ( 2020)
    Böhne, C.
    ;
    Meschut, G.
    ;
    Biegler, M.
    ;
    Rethmeier, M.
    Liquid metal embrittlement (LME) cracking can occur during resistance spot welding (RSW) in zinc-coated advanced high-strength steels (AHSS) for automotive production. In this study, a methodological variation of hold time is performed to investigate the process-related crack influence factors. A combination of numerical and experimental investigations confirms, that the extent of heat dissipation and re-heating of the sheet surface can be influenced and thus the degree of crack formation can be controlled in a targeted manner by the parameterisation of the hold time. The temperature and stress history of crack-free and crack-afflicted spot welds are analysed and a conclusion on the borders defining the LME active region is derived.
  • Publication
    Prevention of liquid metal embrittlement cracks in resistance spot welds by adaption of electrode geometry
    ( 2020)
    Böhne, Christoph
    ;
    Meschut, Gerson
    ;
    Biegler, Max
    ;
    Frei, Julian
    ;
    Rethmeier, Michael
    Advanced high strength steels are usually coated by a zinc layer for an increased resistance against corrosion. During the resistance spot welding of zinc coated steel grades, liquid metal embrittlement (LME) may occur. As a result, cracking inside and around the spot weld indentation is observable. The extent of LME cracks is influenced by a variety of different factors. In this study, the impact of the used electrode geometry is investigated over a stepwise varied weld time. A spot welding finite element simulation is used to analyse and explain the observed effects. Results show significant differences especially for highly increased weld times. Based on identical overall dimensions, electrode geometries with a larger working plane allow for longer weld times, while still preventing LME within the investigated material and maintaining accessibility.
  • Publication
    Geometric distortion-compensation via transient numerical simulation for directed energy deposition additive manufacturing
    ( 2020)
    Biegler, Max
    ;
    Elsner, B.A.M.
    ;
    Graf, B.
    ;
    Rethmeier, Michael
    Components distort during directed energy deposition (DED) additive manufacturing (AM) due to the repeated localised heating. Changing the geometry in such a way that distortion causes it to assume the desired shape - a technique called distortion-compensation - is a promising method to reach geometrically accurate parts. Transient numerical simulation can be used to generate the compensated geometries and severely reduce the amount of necessary experimental trials. This publication demonstrates the simulation-based generation of a distortion-compensated DED build for an industrial-scale component. A transient thermo-mechanical approach is extended for large parts and the accuracy is demonstrated against 3d-scans. The calculated distortions are inverted to derive the compensated geometry and the distortions after a single compensation iteration are reduced by over 65%.