Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik IPK

Filters

2
2 2
Reset filters

Settings
Now showing 1 - 2 of 2
  • Publication
    Micro-cutting of a MMC-composite for enhanced injection moulds
    ( 2019)
    Uhlmann, E.
    ;
    Polte, M.
    ;
    Hein, C.
    ;
    Polte, J.
    ;
    Jahnke, C.
    Tools for micro-injection moulding are currently made of hardened steel. These tools are exposed to high local loads, which significantly reduce the injection moulding tool life time tT. Furthermore, the occurring wear of the milling tool during machining of hardened steel leads to reduced surface roughness Ra and geometrical accuracy GF. Copper and aluminium alloys as mould materials provide an alternative to hardened steel with advantages regarding material removal rate QW and wear of the milling tool, but with a significantly reduced life time of the injection moulding tool tT. Until now, the combination of a good machinability and high wear resistance cannot be achieved. The approach, presented in this paper consists of an easy to machine material and the development of a wear resistant metal-matrix-composite (MMC) material layer with a hardness of up to 3,000 HV. Therefore, the pre-machined test specimens made of aluminium-bronze are coated by laser dispersing with wolfram-carbide-particles W2C-WC. Furthermore, for the finishing machining of the coated moulds, a cutting technology for the machining of W2C-WC-particles was developed. The verification of the developed technology was performed with an injection moulding process based on carbon-fibre reinforced thermoplastic material. By means of documented machining efforts, the quality indicators geometrical accuracy GF and surface roughness Ra as well as occurring tool wear, the feasibility of the developed technology was demonstrated.
  • Publication
    Mikrofräsbearbeitung von MMC-Werkstoffschichten unter Einsatz von binderlosem PKD. Analyse des Einflusses der Prozessparameter auf den Mikrofräsprozess
    ( 2019)
    Hein, C.
    ;
    Uhlmann, E.
    ;
    Polte, J.
    ;
    Wiesner, H.M.
    ;
    Jahnke, C.
    ;
    Polte, M.
    Micro-injection moulding is a key technology for the cost-effective production of plastic parts. The commonly used moulds are made of hardened steel and machined by micro-milling with coated cemented carbide tools. Today, these tools suffer from random tool breakage and excessive wear. One solution of this problem is to produce injection moulds made of non-ferrous metals and enhance them by applying a tungsten carbide matrix on the surface. Thus, this investigation addresses the micro-milling process of the resulting Metal-Matrix-Composites. Furthermore, the feasibility of binderless polycrystalline diamond as an innovative cutting material could be shown for this purpose