Options
Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik IPK
Now showing
1 - 2 of 2
-
PublicationWissensbasierte Rekonstruktion von Volumenmodellen( 1990)
;Spur, G. ;Schiller, U. ;Timmermann, M. ;Jansen, H.Krause, F.-L.Limited system consistency in handling 2-D and 3-D modelers is among the serious critical aspects of modern-day CAD systems. The reconstruction method enables straightforward and familiar 2-D input methods for orthogonal views to be conveniently interlinked with the well-known virtues of solid modelling. One problem associated with his technique is, however, the unavoidable generation of excess 3-D elements resulting from projections and only barely identifiable using algorithmic techniques. An approach is described which, with the aid of knowledge-based methods, enables a far-reaching automatic reconstruction of volume models and thus helps to reduce the problem of generating inconsistent models. -
PublicationAutomatic scanning and interpretation of engineering drawings( 1989)
;Großmann, G. ;Jansen, H.Krause, F.-L.Successful future product development will be closely connected to an effective way of using CAD-facilities integrated in a CIM-environment. The integration aspect cannot be seen without concentrating on information processing and information acquisition problems. Todays CAD-systems do not provide possibilities for automatic capture of engineering drawing information. The increasing amount of existing engineering drawings - which in large part contain companies' know how - cannot be modified or accessed by CAD-systems, but may not be neglected in design processes using CAD-systems: Therefore, a real demand for convenient conversion methodes for engineering drawings can be stated. In this paper actual and new possibilities for the automated conversion of engineering drawings into CAD-models are discussed. After a global description of the conversion process, problems as well as existing and future solutions of processing substeps are explained in detail. The structure in principal and c omponents of conversion systems are described. The paper closes with an outlook on future trends and improvements using special hardware, parallel processing features and knowledge based methodes.