Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Advanced Wet-Etch-Only Process for Complete Tri-Layer Rework

 
: Steinke, Philipp; Calvo, Jesús; Uhlig, Benjamin

:
Postprint urn:nbn:de:0011-n-3939302 (406 KByte PDF)
MD5 Fingerprint: 4b23fe43f18a0a35d5245475437f0125
Created on: 24.6.2016


ECS transactions 69 (2015), No.8, pp.153-158
ISSN: 1938-5862 (print)
Electrochemical Society (ECS Meeting) <228, 2015, Phoenix/Ariz.>
English
Journal Article, Conference Paper, Electronic Publication
Fraunhofer IPMS ()

Abstract
A tri-layer patterning technique is used for high numerical aperture immersion lithography at 28 nm node. The tri-layer consists of a photoresist (PR) deposited on a silicon-containing anti-reflective coating (SiARC) above an organic planarization layer (OPL). Defective PR processes (e.g. overlay, over-exposure, residues) are repeatedly being reworked in high volume manufacturing. Due to the different chemical composition of the three layers, multiple etch processes are necessary. In this work, we investigate a wet-etch-only tri-layer rework approach that has the advantage of lower material damage, cost reduction and increased throughput. Complete stack removal and low defect levels on patterned 300 mm wafers could be achieved.

: http://publica.fraunhofer.de/documents/N-393930.html