Options
2024
Conference Paper
Title
Laser-based method for the fabrication of monolithically and vertically integrated MEMS sensors
Abstract
An obstacle to further miniaturization and higher precision of MEMS sensors is the separate design of the sensor and the integrated chip. Parasitic capacitances in the bonding wires can affect the signal quality negatively. Integrating the sensor directly onto the ASIC not only eliminates this source of error, but also reduces the space requirement. One challenge to be addressed is the thermal load of the ASIC, which must not be exceeded. A solution to this problem is a two-step process. First, doped silicon for the sensor structures is deposited in an amorphous phase using PECVD. Subsequently, laser radiation is used to crystallize the silicon and achieve a conductive layer. After etching, the mechanical anchor points double as the electrical contacts of the sensor structures. Complete crystallization of this layer is therefore crucial for the functionality of the sensor. In this context, strategies for laser annealing an amorphous silicon layer over the full depth are developed, and the complete solid-phase crystallization of a 10 μm thick amorphous silicon layer is demonstrated. Furthermore, a trade-off between the full depth crystallization of the silicon layer and the functional integrity of the ASIC is identified. This tradeoff must be experimentally verified and, if proven, circumvented through appropriate processing strategies.
Author(s)
Conference