Options
2021
Conference Paper
Titel
Investigation of the micro hardness at the cut surface of fine blanked parts with variation of sheet material and cutting temperature
Abstract
Fine blanking is a production technology of high importance especially for the automotive industry. As a procedure of sheet metal separation, it is possible to produce complex parts in a single stroke. As a difference to conventional punching, the cutting surface of fine blanked parts can often be used as a functional surface without further process steps. However, fine blanking as a forming process changes the microstructure of the metal sheet to a higher extend than cutting or machining processes. Due to this, it is of utmost importance to investigate the cause-effect-relations between the fine blanking process parameters and the resulting properties of the fine blanked part. Especially the condition of the cut surface as an important quality criterion has to be investigated. The quality characteristics of the cut surface of fine blanked parts are often subject of investigations. In addition, it would be of importance to investigate how the material properties in the shear zone are changed by the fine blanking process. This on one hand in turn can enable conclusions to be drawn about possible punch wear. If, on the other hand, hardening of the cut surface takes place as a result of fine blanking, then this could have a positive influence on the application properties of fine blanked components. Thus, an experimental fine blanking investigation of the micro hardness of the cutting surface has been made with variation of steel material and cutting temperature. It could be demonstrated that the micro hardness increases in direction towards the burr. This is independent on material and cutting temperature.