Influence of Screw Design and Process Parameters on the Product Quality of PEO:LiTFSI Solid Electrolytes Using Solvent-Free Melt Extrusion

All-solid-state battery (ASSB) technology is a new energy system that reduces the safety concerns and improves the battery performance of conventional lithium-ion batteries (LIB). The increasing demand for such new energy systems makes the transition from laboratory scale production of ASSB components to larger scale essential. Therefore, this study investigates the dry extrusion of poly(ethylene oxide):lithium bis (trifluoromethylsulfonyl)imide (PEO:LiTFSI) all-solid-state electrolytes at a ratio of 20:1 (EO:Li). We investigated the influence of different extruder setups on the product quality. For this purpose, different screw designs consisting of conveying, kneading and mixing elements are evaluated. To do so, a completely dry and solvent-free production of PEO:LiTFSI electrolytes using a co-rotating, intermeshing, twin-screw extruder under an inert condition was successfully carried out. The experiments showed that the screw design consisting of kneading elements gives the best results in terms of process stability and homogeneous mixing of the electrolyte components. Electrochemical impedance spectroscopy was used to determine the lithium-ion conductivity. All electrolytes produced had an ionic conductivity (σionic) of (1.1-1.8) × 10-4 S cm-1 at 80 °C.