Options
2025
Journal Article
Title
Improving the recyclability of rare earth magnets in electrical motors by using debonding-strategies
Abstract
Although rare earth magnets are produced under cost-intensive and environmentally harmful conditions, no sustainable recycling or re-use processes do exist. This is especially true for permanent magnet synchronous motors (PSM), which contain up to 2.5 kg permanent magnets, consisting of rare earths elements. Currently, discarded magnets are usually not sorted out but end up in the scrap yard and are melted down again with other residual metal. However, as rare earths are categorised as a critical raw material, recovery is desirable for political and environmental reasons. As for the assembly of permanent magnets manufacturers are increasingly relying on adhesive bonding technology, an efficient recycling strategy must also consider an efficient debonding strategy. For the recovery of permanent magnets, the study presented revealed that debonding on demand (DoD) proved to be a necessary requirement. The debonding triggers investigated included the application of heat at temperatures of 65–400 °C. Within the study, a selection of commercially available adhesive systems was analysed. These included dual-curing 1-component acrylates (anaerobic and UV-curing) and 1-component heat-curing epoxies. In addition, adhesives have been modified with thermally expandable additives or were chemically modified. By using an appropriate debonding strategy, a significant reduction of the mechanical forces for separation and residues of remaining adhesives on the magnets could be realized. With help of theses debonding strategies possible disassembly automation processes are shown.
Author(s)
Open Access
File(s)
Rights
CC BY 4.0: Creative Commons Attribution
Additional link
Language
English