Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Thermal Analysis of Passively Cooled Hybrid CPV Module Using Si Cell as Heat Distributor

 
: Martinez, J.; Steiner, M.; Wiesenfarth, M.; Glunz, S.W.; Dimroth, F.

:
Postprint urn:nbn:de:0011-n-5486386 (3.1 MByte PDF)
MD5 Fingerprint: ff63f84daf14e136fc3f68ff3aded028
© IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
Created on: 26.6.2019


IEEE Journal of Photovoltaics 9 (2019), No.1, pp.160-166
ISSN: 2156-3381
ISSN: 2156-3403
English
Journal Article, Electronic Publication
Fraunhofer ISE ()
Photovoltaik; III-V und Konzentrator-Photovoltaik; III-V Epitaxie und Solarzellen; plus diffuse irradiance; silicon as heat distributor; concentrator photovoltaic (CPV) on silicon (Si) module; concentrator PV

Abstract
In this paper, we introduce a new kind of hybrid concentrator photovoltaic module that is capable of harvesting direct and diffuse irradiance. The concept, denominated EyeCon, uses a Fresnel lens to concentrate direct irradiance onto a primary III-V four-junction solar cell. Directly underneath, a large-area silicon cell is stacked and used as a secondary conversion material for diffuse irradiance while also acting as a heat distributor. This paper focuses on determining the feasibility of this concept based on the evaluation of the thermal behavior of both cells. Such assessment is performed using finite element analysis, indoor infrared thermography, and outdoor measurements under real concentrator operating conditions. The results reveal that under an ambient temperature of 25 °C and a geometric concentration of 226 × 900 W/m 2 plus 100 W/m 2 of diffuse irradiance, the concentrator III-V and silicon cell temperatures do not increase beyond 80 °C and 60 °C, respectively. Thus, our analysis shows that the silicon can be used simultaneously as a heat distributor and a solar cell.

: http://publica.fraunhofer.de/documents/N-548638.html