Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2021"A-Probleme" des nichttraumatologischen Schockraummanagements
Michael, M.; Kumle, B.; Pin, M.; Hammer, N.; Plettenberg, C.; Bernhard, M.
Journal Article
20215th Fraunhofer Direct Digital Manufacturing Conference 2020. Proceedings
: Müller, Bernhard
Conference Proceedings
2021Adapted Scan Strategy for the Fabrication of Open-Porous Fine-Cellular Structures in the Context of Bone Implants Using Laser Powder Bed Fusion (LPBF)
Korn, Hannes; Töppel, Thomas; Drossel, Welf-Guntram; Holtzhausen, Stefan; Ortmann, Claudia; Koch, Peter; Oberbach, Thomas; Stelzer, Ralph
Conference Paper
2021Additive Fertigung in der Medizintechnik: Anwendungspotentiale des metallischen Laser-Strahlschmelzens (LPBF)
Gebhardt, Felix
Presentation
2021Adiabatic Blanking: Influence of Clearance, Impact Energy, and Velocity on the Blanked Surface
Winter, Sven; Nestler, Matthias; Galiev, Elmar; Hartmann, Felix; Psyk, Verena; Kräusel, Verena; Dix, Martin
Journal Article
2021Adjusting the Residual Stress State in Wire Drawing Products via In-Process Modification of Tool Geometries
Baumann, M.; Selbmann, R.; Milbrandt, M.; Kräusel, V.; Bergmann, M.
Journal Article
2021AI-based Quality Monitoring of Coupled Digital Twins for Multistep Process Chains
Selch, Maximilian; Hänel, Albrecht; Frieß, Uwe; Ihlenfeldt, Steffen
Conference Paper
2021Aktive Verbinder für Bauelemente aus Carbonbeton. Entwicklung eines kompakten Verbinders aus thermischen Formgedächtnislegierungen
Ayoubi, M.; Sobotta, S.; Schlüter, D.; Michler, H.; Kropp, T.; Thüsing, K.; Kallnick, S.; Schumann, A.
Journal Article
2021Analyzing the influence of a deep cryogenic treatment on the mechanical properties of blanking tools by using the short-time method PhyBaLCHT
Blinn, Bastian; Winter, Sven; Weber, Martin; Demmler, Matthias; Kräusel, V.; Beck, Tillmann
Journal Article
2021Application of Fourier-related data reduction methods in sheet metal forming
Schwarz, C.; Link, P.; Ihlenfeldt, S.; Drossel, W.-G.
Journal Article
2021Assessment of plantaris and peroneus tertius tendons as graft materials for ankle ligament reconstructions - A cadaveric biomechanical study
Zwirner, J.; Koutp, A.; Vidakovic, H.; Ondruschka, B.; Kieser, D.C.; Hammer, N.
Journal Article
2021Author Correction: The influence of different sample preparation on mechanical properties of human iliotibial tract
Fischer, B.; Kurz, S.; Höch, A.; Schleifenbaum, S.
Journal Article
2021Basic material and technology investigations for material bonded hybrids by continuous hybrid profile fabrication
Schubert, K.; Gedan-Smolka, M.; Marschner, A.; Rietzschel, T.; Uhlig, K.; Löpitz, D.; Wagner, D.; Knobloch, M.
Conference Paper
2021Bio-based design methodologies for products, processes, machine tools and production systems
Houten, F. van; Wertheim, R.; Ayali, A.; Poverenov, E.; Mechraz, G.; Eckert, U.; Rentzsch, H.; Dani, I.; Willocx, M.; Duflou, J.R.
Journal Article
2021Biomechanical characterization of human temporal muscle fascia in uniaxial tensile tests for graft purposes in duraplasty
Zwirner, J.; Ondruschka, B.; Scholze, M.; Schulze-Tanzil, G.; Hammer, N.
Journal Article
2021Characterization of vibration in continuous generating grinding and resulting influence on tooth flank topography and gear excitation
Böttger, J.; Kimme, S.; Drossel, W.-G.
Journal Article
2021Cognitive clamping geometries for monitoring elastic deformation in forming machines and processes
Kurth, R.; Bergmann, M.; Tehel, R.; Dix, M.; Putz, M.
Journal Article
2021A Comparative Study of Automatic Localization Algorithms for Spherical Markers within 3D MRI Data
Fiedler, Christian; Jacobs, Paul-Phillip; Müller, Marcel; Kolbig, S.; Grunter, Ronny; Meixensberger, Jürgen; Winkler, Dirk
Journal Article
2021Computed tomography osteoabsorptiometry-based investigation on subchondral bone plate alterations in sacroiliac joint dysfunction
Poilliot, A.; Doyle, T.; Kurosawa, D.; Toranelli, M.; Zhang, M.; Zwirner, J.; Müller-Gerbl, M.; Hammer, N.
Journal Article
2021Concept for controlled adjustment of residual stress states in semi-finished products by gradation extrusion
Selbmann, R.; Baumann, M.; Dobecki, M.; Bergmann, M.; Kräusel, V.; Reimers, W.
Journal Article
2021Continuous profile production with hybrid materials by pultrusion
Knobloch, Marcus; Löpitz, David; Wagner, David; Drossel, Welf-Guntram
Conference Paper
2021Control approaches for tempering machine tool frames with multiple fluid channels and limited, jointly used actuating variable
Mater, Sarah; Hellmich, Arvid; Popken, Jens; Ihlenfeldt, Steffen
Journal Article
2021Cyber-physical approach toward semiautonomous postprocessing of additive manufactured parts and components
Seidel, A.; Gollee, C.; Schnellhardt, T.; Hammer, M.; Dassing, J.; Vogt, R.; Wiese, T.; Teicher, U.; Hellmich, A.; Ihlenfeldt, S.; Drossel, W.-G.
Journal Article
2021Designed by Fraunhofer
: Sähn, Elke (Konzept/Red.); Kölzig, Bettina (Konzept/Red.); Löschner, Konrad (Gestaltung); Elsner, Sophia
Scientific Anthology
2021Digital innovation hubs for robotics - TRINITY approach for distributing knowledge via modular use case demonstrations
Lanz, M.; Reimann, J.; Ude, A.; Kousi, N.; Pieters, R.; Dianatfar, M.; Makris, S.
Journal Article
2021Dimensional Accuracy of Extrusion-Based 3D Printing
Drossel, Welf-Guntram; Kausch, Martin; Blase, Johannes; Jankowsky, Lysander
Conference Paper
2021The dynamic impact behavior of the human neurocranium
Zwirner, J.; Ondruschka, B.; Scholze, M.; Workman, J.; Thambyah, A.; Hammer, N.
Journal Article
2021Effect of sample geometry on the macroscopic shear deformation of the titanium alloy Ti-10V-2Fe-3Al subjected to quasi-static and dynamic compression-shear loading
Winter, Sven; Scholze, Mario; Wagner, Martin F.-X.
Journal Article
2021Effective use of DEM to design chain conveyor geometry
Žídek, M.; Rozbroj, J.; Jezerska, L.; Diviš, J.; Nečas, J.; Zegzulka, J.; Demmler, M.
Journal Article
2021Enhancing Factory Layout Planning by Means of Generative Design
Süße, Marian; Putz, Matthias; Ihlenfeldt, Steffen
Presentation
2021Entwicklung einer funktionalisierten Strukturkomponente mit adaptiver Steifigkeit für die Soft-Robotik
Wockenfuß, Wilhelm Richard
Presentation
2021Erprobung anwendungsadaptierter CVD-Diamantschichten beim Stanzen
Winter, Sven; Stein, Christian; Richter, Karsten; Höfer, Markus; Sittinger, Volker; Psyk, Verena; Kräusel, Verena
Journal Article
2021Evaluation of augmented reality supported approaches for product design and production processes
Schumann, M.; Fuchs, C.; Kollatsch, C.; Klimant, P.
Journal Article
2021Everting of tubular net structures based on Shape Memory Alloys
Hensel, S.; Boxberger, L.; Weisheit, L.; Schellnock, J.; Thielsch, J.; Riedel, F.; Drossel, W.-G.
Journal Article
2021Expansion of the Fused Filament Fabrication (FFF) process through wire embedding, automated cutting, and electrical contacting
Ziervogel, F.; Boxberger, L.; Bucht, A.; Drossel, W.-G.
Journal Article
2021Experimental and Numerical Investigations into Magnetic Pulse Welding of Aluminum Alloy 6016 to Hardened Steel 22MnB5
Drehmann, Rico; Scheffler, Christian; Winter, Sven; Psyk, Verena; Kräusel, Verena; Lampke, Thomas
Journal Article
2021Experimental Validation of an Intelligent Hybrid Plain Bearing Active Control
Eberhardt, C.; Kurth, R.; Kraft, C.; Schwarze, H.; Päßler, T.; Bergmann, M.; Putz, M.
Journal Article
2021Experimental validation of characteristic diagram-parameterization for environment-induced thermal interactions on machine tools in a climate chamber
Kumar, T.S.; Glänzel, J.; Tehel, R.; Putz, M.
Journal Article
2021Finite element analysis of orthogonal cutting of cellular metals: Influence of cutting conditions on chip formation and surface damage
Guerra-Silva, R.; Teicher, U.; Ihlenfeldt, S.; González-Zamora, A.
Journal Article
2021Flexible automation for agile production - TRINITY use case introduction
Schmidt, Patrick Alexander
Video
2021Fused Filament Fabrication of NiTi Components and Hybridization with Laser Powder Bed Fusion for Filigree Structures
Abel, Johannes; Mannschatz, Anne; Teuber, Robert; Müller, Bernhard; Al Noaimy, Omar; Riecker, Sebastian; Thielsch, Juliane; Matthey, Björn; Weißgärber, Thomas
Journal Article
2021Generative design in factory layout planning
Süße, M.; Putz, M.
Journal Article
2021Holistic animation and functional solution for digital manikins in context of virtual assembly simulations
Fuchs, C.; Allmacher, C.; Klimant, P.; Putz, M.
Journal Article
2021Hybridbauteil aus Faserverbund- und papierabgeleiteter Keramik für den Einsatz als formstabile Wärmeisolation
Knohl, Stefan; Wüstner, Cornell; Puchas, Georg; Lindner, Felix; Trân, Ricardo; Galiev, Elmar
Internet Contribution
2021Impact of powder storage and Laser Powder Bed Fusion processing on powder characteristics of Ti-6Al-4V Grade 23
Töppel, Thomas; Bittner, Florian; Köhler, Felix; Hendl, Julian; Heinze, Stefan; Marquardt, Axel
Poster
2021In-process evaluation of the grinding process using a new Barkhausen noise method
Rößler, M.; Putz, M.; Hochmuth, C.; Gentzen, J.
Journal Article
2021Induction coil as sensor for contactless, continuous in-process determination of steel microstructure by means of Magnetic Induction Spectroscopy (MIS)
Leonhardt, A.; Wendler, F.; Wertheim, R.; Kräusel, V.; Kanoun, O.
Journal Article
2021Influence of the Moisture Content of Thermoplastics on their Vibroacoustic Behavior
Georgi, Tom; Troge, Jan; Diemert, Jan
Journal Article
2021Integration of pure copper to optimize heat dissipation in injection mould inserts using laser metal deposition
Polenz, Stefan; Kolbe, Christian; Bittner, Florian; Lopez, Elena; Brückner, Frank; Leyens, Christoph
Journal Article
2021Interdisziplinäre Produktentwicklung
Hermeling, Christian; Abicht, Johannes; Theling, Thomas; Hock, Ralf
Conference Paper
2021Interface-Free Connection of Mobile Robot Cells to Machine Tools Using a Camera System
Abicht, Johannes; Wiese, Torben; Hellmich, Arvid; Ihlenfeldt, Steffen
Conference Paper
2021Investigation of Orthopedic Prosthesis Socket Management after Transfemoral Amputation by Expert Survey
Carabello, Alina; Schellnock, Julia; Schleifenbaum, Stefan; Hömme, Ann-Kathrin; Felderhoff, Thomas; Menküc, Benjamin Sefa; Drossel, Welf-Guntram
Journal Article
2021Investigations on digitalization for sustainable machine tools and forming technologies
Klimant, P.; Koriath, H.-J.; Schumann, M.; Winkler, S.
Journal Article
2021Kinematic analysis and process stability of ultrasonic-assisted drilling
Georgi, Oliver; Rüger, Carlo; Rentzsch, Hendrik; Putz, Matthias
Journal Article
2021Konzepte zur Bauteilvermessung und -Inspektion
Pierer, Alexander; Wiener, Thomas; Hoffmann, Michael
Presentation
2021Linked Data als Basis einer evolutionären Optimierung von Produktionsprozessen
Mehling, Carl Willy; Wenzel, Ken; Hellmich, Arvid; Ihlenfeldt, Steffen
Journal Article
2021Machine learning for material characterization with an application for predicting mechanical properties
Stoll, A.; Benner, P.
Journal Article
2021Media for Dimensional Stabilization of Rubber Compounds during Additive Manufacturing and Vulcanization
Drossel, W.-G.; Ihlemann, J.; Landgraf, R.; Oelsch, E.; Schmidt, M.
Journal Article
2021Metall-3D-Druck für den Werkzeug- und Formenbau
Gebauer, Mathias; Oettel, Markus; Müller, Bernhard
Presentation
2021Metalle drucken? Additive Fertigung (3D-Druck) erklärt
Gebhardt, Felix
Presentation
2021Microstructure and magnetic properties of Nd-Fe-B permanent magnets produced by laser powder bed fusion
Bittner, F.; Thielsch, J.; Drossel, W.-G.
Journal Article
2021Mit smarten Systemen flexibel in die Zukunft
 
Report
2021Neuartiger thermisch-gestützter Durchsetzfügeprozess zur Herstellung punktueller Metall-Kunststoffverbindungen
Wesling, Volker; Wiche, Henning; Koch, Christian
Presentation
2021New Separation Processes for Fabrication of Magnetic Shape Memory Actuator Elements
Böhm, Andrea; Meichnser, Gunnar; Schneider, Jörg; Drossel, Welf-Guntram
Conference Paper
2021A Novel Adaptive Interpolation Approach for the Implementation of Operating-Speed-Dependent Motion Profiles in Processing Machines
Holowenko, O.; Troll, C.; Ihlenfeldt, S.; Majschak, J.-P.
Journal Article
2021Numerical Investigations on Thermal Forming Limit Testing with Local Inductive Heating for Hot Forming of AA7075
Reuther, F.; Lieber, T.; Heidrich, J.; Kräusel, V.
Journal Article
2021On the morphological relations of the Achilles tendon and plantar fascia via the calcaneus: A cadaveric study
Singh, A.; Zwirner, J.; Templer, F.; Kieser, D.; Klima, S.; Hammer, N.
Journal Article
2021Perspektywy rozwoju rynku pojazdów
Nossol, Patryk; Drebenstedt, Claudia; Kroll, Lothar; Mamala, J.
Journal Article
2021Preliminary observations of the sequence of damage in excised human juvenile cranial bone at speeds equivalent to falls from 1.6 m
Brooks, T.; Zwirner, J.; Hammer, N.; Ondruschka, B.; Jermy, M.
Journal Article
2021Processing Q&P steels by hot-metal gas forming: Influence of local cooling rates on the properties and microstructure of a 3rd generation AHSS
Winter, Sven; Werner, Markus; Haase, Rico; Psyk, Verena; Fritsch, Sebastian; Böhme, Marcus; Wagner, Martin F.X.
Journal Article
2021Proof of Concept for the Detection of Local Pressure Marks in Prosthesis Sockets Using Structural Dynamics Measurement
Neupetsch, C.; Hensel, E.; Kranz, B.; Drossel, W.-G.; Felderhoff, T.; Heyde, C.-E.
Journal Article
2021Quantencomputing in der Produktionstechnik. Schnellere Berechnungen für die Produktion
Lässig, Jörg; Ihlenfeldt, Steffen; Müssig, Daniel; Hänel, Albrecht; Selch, Maximilian
Internet Contribution
2021Quantitative evaluation of the sacroiliac joint fixation in stress reduction on both sacroiliac joint cartilage and ligaments: A finite element analysis
Venayre, B.; Koyama, Y.; Kurosawa, D.; Hammer, N.; Lingslebe, U.; Murakami, E.; Ozawa, H.; Ohashi, T.
Journal Article
2021Reaming of carbon fibre reinforced plastics: Influence of tool geometry on process forces and tool wear
Sauer, K.; Putz, M.
Journal Article
2021Roboter im Automobilbau ohne Berührung kontrollieren
 
Journal Article
2021Secure data storage and service automation for cyber physical production systems through distributed ledger technologies
Lemme, G.; Nölscher, K.A.; Bei, E.; Hermeling, C.; Ihlenfeldt, S.
Journal Article
2021Smart roller ski - functionalized radius pultrusion in application
Lies, Carsten; Löpitz, David; Knobloch, Marcus
Presentation
2021Software assisted clamping point classification and position optimization for the efficient flexibilization of carbody fixtures using mathematical geometry-based search algorithms
Fritzsche, R.; Schaffrath, R.; Todtermuschke, M.
Journal Article
2021Strategies for residual stress adjustment in bulk metal forming
Franceschi, A.; Stahl, J.; Kock, C.; Selbmann, R.; Ortmann-Ishkina, S.; Jobst, A.; Merklein, M.; Kuhfuß, B.; Bergmann, M.; Behrens, B.-A.; Volk, W.; Groche, P.
Journal Article
2021Strukturkomponenten mit schaltbarer Steifigkeit für die Soft-Robotik
Wockenfuß, Wilhelm Richard; Weisheit, Linda; Rieß, Sebastian; Kaal, Wiliam
Journal Article
2021Subchondral bone changes following sacroiliac joint arthrodesis - a morpho-mechanical assessment of surgical treatment of the painful joint
Poilliot, A.; Kurosawa, D.; Toranelli, M.; Zhang, M.; Zwirner, J.; Müller-Gerbl, M.; Hammer, N.
Journal Article
2021Synergy Analysis and verification of connected Cyber Physical Systems using virtual commissioning
Allmacher, C.; Seiderer, A.; Klimant, P.; Kuhl, M.
Journal Article
2021A systematic review and meta-analysis of the hip capsule innervation and its clinical implications
Tomlinson, J.; Ondruschka, B.; Prietzel, T.; Zwirner, J.; Hammer, N.
Journal Article
2021Tackling problems on maintenance and evolution in industry 4.0 scenarios using a distributed architecture
Koch, S.; Wunderlich, T.; Hansert, J.; Heinrich, R.; Schlegel, T.
Conference Paper
2021Theoretical and experimental investigations of mechanical vibrations of hot hammer forging
Saberi, S.; Fischer, J.; Stockinger, M.; Tikal, R.; Afsharnia, R.
Journal Article
2021Topographical mapping of the mechanical characteristics of the human neurocranium considering the role of individual layers
Zwirner, J.; Safavi, S.; Scholze, M.; Li, K.C.; Waddell, J.N.; Busse, B.; Ondruschka, B.; Hammer, N.
Journal Article
2021Towards high performance living manufacturing systems - A new convergence between biology and engineering
Byrne, G.; Damm, O.; Monostori, L.; Teti, R.; Houten, F. van; Wegener, K.; Wertheim, R.; Sammler, F.
Journal Article
2021Ultrasonic assistance to reduce and monitor tool wear in deep drilling
Georgi, Oliver; Rüger, Carlo; Rentzsch, Hendrik; Putz, Matthias; Dix, Martin
Conference Paper
2021Vacuum gripper without central compressed air supply
Schaffrath, R.; Jäger, E.; Winkler, G.; Doant, J.; Todtermuschke, M.
Journal Article
2021Verfahren und Vorrichtung zum Aufbringen einer Beschichtung mittels Laserauftragsschweißen
Paizs, Tibor; Töberling, Gerd
Patent
2021Virtuelle Inbetriebnahme: Sicherheit von Cobot-Arbeitsplätzen einfach virtuell prüfen
Jerke, Philip; Schenke, Christer; Gehrels, Olaf
Internet Contribution
2021Wrist at risk? - Considerations derived from a novel experimental setup to assess torques during hip reaming with potential implications on the orthopedic surgeons’ health
Lorenz, M.; Pelliccia, L.; Werner, M.; Scholze, M.; Klimant, P.; Heyde, C.-E.; Klima, S.; Hammer, N.
Journal Article
2021Zero-error-production through inline-quality control of presshardened automotive parts by multi-camera systems
Pierer, Alexander; Wiener, Thomas; Gjakova, L.; Koziorek, J.
Journal Article
20202D Finite Element Modeling of the Cutting Force in Peripheral Milling of Cellular Metals
Guerra Silva, Rafael; Teicher, Uwe; Brosius, Alexander; Ihlenfeldt, Steffen
Journal Article
2020Accuracy of a magnetic resonance imaging-based 3D printed stereotactic brain biopsy device in dogs
Gutmann, Sarah; Winkler, Dirk; Müller, Marcel; Möbius, Robert; Fischer, Jean-Pierre; Böttcher, P.; Kiefer, Ingmar; Grunert, Ronny; Flegel, Thomas
Journal Article
2020Adaptive Prozessführung für die Zerspanung
Hochmuth, Carsten; Pierer, Alexander; Krage, Robin; Pätzold, Holger; Gottmann, Ralf
Study
2020Additive Manufacturing and Casting - a Novel Hybrid Approach
Oettel, Markus; Polenz, Stefan; Flügel, Sebastian; Kleine, Andreas; Schrader, Andreas
Internet Contribution
2020Additive manufacturing technologies for next-generation powertrains
Fiedler, Philipp; Bräunig, Jan; Stelzer, Sebastian; Richter, Robert; Kaulfuß, Frank; Windisch, Thomas; Milaev, Nikolaus
Conference Paper
2020Adiabatic blanking of advanced high-strength steels
Schmitz, Fabian; Winter, Sven; Clausmeyer, Till; Wagner, Martin Franz-Xaver; Tekkaya, Erman
Journal Article
2020Adjustment of uncertain model parameters to improve the prediction of the thermal behavior of machine tools
Ihlenfeldt, Steffen; Schröder, Steffen; Penter, Lars; Hellmich, Arvid; Kauschinger, Bernd
Journal Article
2020Anatomical structures at risk using different approaches for sacrospinous ligament fixation
Decker, A. de; Fergusson, R.; Ondruschka, B.; Hammer, N.; Zwirner, J.
Journal Article
2020Anpassung der Nachgiebigkeit des Antriebsstranges in Servospindelpressen
Zorn, Wolfgang; Hamm, Lucas
Study
2020Antibacterial coating of Ti-6Al-4V surfaces using silver nano-powder mixed electrical discharge machining
Bui, Viet D.; Mwangi, James W.; Meinshausen, Ann-Kathrin; Mueller, A.J.; Bertrand, Jessica; Schubert, Andreas
Journal Article
2020Anwendung von optischer Messtechnik zur Bestimmung von Formänderungen beim Tiefziehen und Fügen von Feinblechen
Kriechenbauer, Sebastian; Ackert, Patrick
Presentation
2020Automated design of product-flexible car body fixtures with software-supported part alignment using particle swarm optimization
Fritzsche, Rayk; Voigt, Eric; Schaffrath, Robert; Todtermuschke, Marcel; Röber, Marcel
Journal Article
2020Basic research for additive manufacturing of rubber
Drossel, W.-G.; Ihlemann, J.; Landgraf, R.; Oelsch, E.; Schmidt, M.
Journal Article
2020Beleuchtungsabhängige Effekte bei der Bildmessung von kreisförmigen Zielmarken
Riedel, Mirko; Deutsch, Jessica; Liebold, Frank; Ihlenfeldt, Steffen
Journal Article
2020Bestimmung des dynamischen Übertragungsverhaltens von Elastomerlagern im Frequenzbereich von 2 kHz bis 10 kHz
Troge, Jan; Drossel, Welf-Guntram; Burkhardt, Martin; Hensel, Eric; Gnauck, Marco
Conference Paper
2020Bio-inspired Factories of the Future
Hellmich, Arvid; Sai, Brandon; Süße, Marian; Schreiber, Martin; Wiese, Torben; Ihlenfeldt, Steffen; Bauernhansl, Thomas; Putz, Matthias; Reinhart, Gunther
Conference Paper
2020Biological Cell Investigation of Structured Nitinol Surfaces for the Functionalization of Implants
Hamann, Isabell; Hempel, Ute; Rotsch, Christian; Leimert, Mario
Journal Article
2020The biological transformation of industrial manufacturing - Technologies, status and scenarios for a sustainable future of the German manufacturing industry
Miehe, Robert; Bauernhansl, Thomas; Beckett, Marc; Brecher, Christian; Demmer, Axel; Drossel, Welf-Guntram; Elfert, Patrick; Full, Johannes; Hellmich, Arvid; Hinxlage, Julian; Horbelt, Jessica; Jutz, G.; Krieg, S.; Maufroy, Christophe; Noack, Marian; Sauer, Alexander; Schließmann, Ursula; Scholz, Paul; Schwarz, Oliver; Ten Hompel, Michael; Wrycza, Philipp; Wolperdinger, Markus
Journal Article
2020A cadaver-based biomechanical model of acetabulum reaming for surgical virtual reality training simulators
Pelliccia, L.; Lorenz, M.; Heyde, C.-E.; Kaluschke, M.; Klimant, P.; Knopp, S.; Schleifenbaum, S.; Rotsch, C.; Weller, R.; Werner, M.; Zachmann, G.; Zajonz, D.; Hammer, N.
Journal Article
2020The Challenge of Open Cellular Metal Foam Production
Hannemann, Christian; Uhlig, Mandy; Hipke, Thomas; Meier, Iris
Conference Paper
2020Characterization of a bonding method for titanium-glass sealing
Winkler, S.; Edelmann, J.; Schubert, A.
Journal Article
2020Characterization of the arcing phenomenon in micro-EDM and its effect on key mechanical properties of medical-grade Nitinol
Mwangi, James Wamai; Bui, Vier D.; Thüsing, Kai; Hahn, Sandra; Wagner, Martin F.-X.; Schubert, Andreas
Journal Article
2020Closure of a Paravalvular Leak in Transcatheter Aortic Valve Replacement Using the Candy-Plug Technique
Hänsig, Martin; Kuntze, Thomas; Grunert, Ronny; Böcking, Richardt; Owais, Tamer
Journal Article
2020Cognitive Production Systems: A Mapping Study
Ghofrani, Javad; Deutschmann, Bastian; Divband Soorati, Mohammad; Reichelt, Dirk; Ihlenfeldt, Steffen
Conference Paper
2020Combined laser hardening and laser surface texturing forming tool 1.2379
Aragaw, Endalkachew Mekonnen; Gärtner, Eric; Schubert, Andreas
Journal Article
2020Comparison of abrasive water jet technologies in terms of performance and kerf geometry accuracy for cutting ceramics
Morczinek, Florian; Putz, Matthias; Dix, Martin
Journal Article
2020A Comparison of Basis Functions for Thermal Error Compensation based on Regression Analysis - A Simulation Based Case Study
Naumann, Christian; Putz, Matthias; Glänzel, Janine
Journal Article
2020Comparison of Resistive and Optical Strain Measurement for Early Fracture Detection
Carabello, A.; Neupetsch, C.; Werner, M.; Rotsch, C.; Drossel, W.-G.; Zajonz, D.
Journal Article
2020Compliant joints for the improvement of the dynamic behaviour of a gantry stage with direct drives
Pöhlmann, P.; Peukert, C.; Merx, M.; Müller, J.; Ihlenfeldt, S.
Journal Article
2020A comprehensive and interdisciplinary perspective on sustainable manufacturing towards sustainable life cycles
Früchtl, Marion; Leis, Miriam; Wertheim, Rafael
Journal Article
2020A comprehensive comparison of state-of-the-art manufacturing methods for fuel cell bipolar plates including anticipated future industry trends
Porstmann, Sebastian; Wannemacher, Thomas; Drossel, Welf-Guntram
Review
2020Conductive Heating during Press Hardening by Hot Metal Gas Forming for Curved Complex Part Geometries
Bach, Mirko; Degenkolb, Lars; Reuther, Franz; Psyk, Verena; Demuth, Rico; Werner, Markus
Journal Article
2020Cutting parameter study of CFRP machining by turning and turn-milling
Sauer, Konstantin; Hertel, Matthias; Fickert, Sandro; Witt, Marco; Putz, Matthias
Journal Article
2020Datamining and Application of Machine Learning Algorithms for the Prognosis of Process Parameters at Self-Pierce Riveting
Jäckel, Mathias; Falk, Tobias
Presentation
2020Dehnungsabhängige Elastizitätsmodule und weitere bestimmende Faktoren auf die Rückfederung bei der Blechumformung
Silbermann, Katja; Mauermann, Reinhard; Butz, Alexander
Report
2020Determination of Material and Failure Characteristics for High-Speed Forming via High-Speed Testing and Inverse Numerical Simulation
Psyk, Verena; Scheffler, Christian; Tulke, Marc; Winter, Sven; Guilleaume, Christina; Brosius, Alexander
Journal Article
2020Determination of surface shape deviation by using force-controlled burnishing
Posdzich, Marco; Stöckmann, Rico; Witt, Marco; Putz, Matthias
Journal Article
2020Development approach of actuators for high loads based on shape memory alloys
Maiwald, D.; Bucht, A.; Zorn, W.; Drossel, W.-G.
Conference Paper
2020The development of a digital twin for machining processes for the application in aerospace industry
Hänel, Albrecht; Schnellhardt, Thorben; Wenkler, Eric; Nestler, Andreas; Brosius, Alexander; Corinth, Christian; Fay, Alexander; Ihlenfeldt, Steffen
Journal Article
2020Development of a New Self-flaring Rivet Geometry Using Finite Element Method and Design of Experiments
Kraus, Christian; Falk, Tobias; Mauermann, Reinhard; Drossel, Welf-Guntram
Journal Article
2020Development of a Shape Memory Alloy Actuator for a Micromechanical Sterilisation Cycle Counter
Pagel, Kenny; Esch, Jonas; Hoffmann, Daniel; Trautner, Heiko; Herrlich, Simon; Spieth, Sven; Drossel, Welf-Guntram
Presentation
2020Development of a shape memory alloy actuator for a micromechanical sterilization cycle counter
Pagel, K.; Esch, J.; Hoffmann, D.; Trautner, H.; Herrlich, S.; Spieth, S.; Drossel, W.-G.
Conference Paper
2020Development of Everting Tubular Net Structures Using Simulation for Growing Structures
Boxberger, Lukas; Weisheit, Linda; Hensel, Sebastian; Schellnock, Julia; Mattheß, Danilo; Riedel, Frank; Drossel, Welf-Guntram
Journal Article
2020Distributed Ledger Technologies in Logistik und Supply Chain Management im Kontext von Datensicherheit und Datenqualität
Stange, Maximilian
Conference Paper
2020Domänenübergreifende Workflows zur effizienten Entwicklung Programmierbarer Materialien
Weisheit, Linda; Wenz, Franziska; Lichti, Tobias; Eckert, Medardus; Baumann, Sascha; Hübner, Christof; Eberl, Christoph; Andrä, Heiko
Journal Article
2020Dry deep drawing of aluminum for automotive production
Prieske, Markus; Börner, Richard; Berger, Thomas; Kühn, Ralf; Scholz, Peter; Schubert, Andreas; Müller, Roland; Vollertsen, Frank
Journal Article
2020Dry sheet metal forming of aluminum by smooth DLC coatings
Abraham, Tim; Bräuer, Günter; Flegler, Felix; Groche, Peter; Demmler, Matthias
Journal Article
2020The effect of the supplementation of a diet low in calcium and phosphorus with either sheep milk or cow milk on the physical and mechanical characteristics of bone using a rat model
Burrow, K.; Young, W.; Hammer, N.; Safavi, S.; Scholze, M.; McConnell, M.; Carne, A.; Barr, D.; Reid, M.; Bekhit, A.E.-D.
Journal Article
2020Effective FE models for simulating the elasto-mechanical characteristics of forming machines
Tehel, Robert; Päßler, Thomas; Bergmann, Markus
Journal Article
2020Efficient lightweight construction for crash-relevant structural parts based on intrinsic hybridization
Böhme, Marcus; Kießling, Robert; Ihlemann, Jörn; Riemer, Matthias; Drossel, Welf-Guntram; Dittes, Axel; Schwöbel, Daniel-Stephan; Scharf, Ingolf; Lampke, Thomas; Scholze, Mario; Wagner, Martin Franz-Xaver
Presentation
2020Electromagnetic pulse forming
Psyk, Verena; Linnemann, Maik; Sebastiani, Gerd
Book Article
2020Embedding Additive Manufacturing into industrial value chains - an opportunity to fill the gaps in traditional supply chains
Müller, Bernhard
Journal Article
2020Entwicklung einer funktionalisierten Strukturkomponente mit adaptiver Steifigkeit für die Soft-Robotik
Wockenfuß, Wilhelm Richard
: Weisheit, Linda (BetreuerIn)
Thesis
2020Entwicklungstrends in der Warmumformung
Schieck, Frank; Mauermann, Reinhard; Schönherr, Julia
Presentation
2020Equal-channel angular pressing influencing the mean stress sensitivity in the high cycle fatigue regime of the 6082 aluminum alloy
Winter, Lisa; Hockauf, Kristin; Winter, Sven; Lampke, Thomas
Journal Article
2020Erweiterung der Prozessgrenzen für faltenfreies Verschließen von Deckeln aus hochfestem dünnem Verpackungsstahl
Drossel, Welf-Guntram; Lieber, Thomas; Nagel, Matthias
Report
2020Examination of the variance in human pathways in HRC with heavy duty-robots for safe process planning
Bdiwi, Mohamad; Harsch, Ann-Kathrin; Reindel, Paul; Putz, Matthias
Journal Article
2020Experimental and numerical investigation of CFRP cylinders with circular cutouts under axial compression
Khakimova, R.; Degenhardt, R.; Wilcken, D.
Journal Article
2020Experimental study on micro forming of structured surfaces for high static friction connection elements
Schaarschmidt, Ingo; Steinert, Philipp; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Schubert, Andreas; Jungblut, Guido
Journal Article
2020Experimental validation of adaptive pedicle screws - a novel implant concept using shape memory alloys
Werner, Michael; Hammer, Niels; Rotsch, Christian; Berthold, Isabell; Leimert, Mario
Journal Article
2020Experimentelle Untersuchung zu faserverbundgerechten Crash-Wirkmechanismen bei axialer Druckbelastung
Nossol, Patryk; Saleem, Arham
Journal Article
2020Fabrication and functional properties of additively manufactured NiTi lattice structures using adaptive scanning strategies
Gustmann, Tobias; Korn, Hannes; Werner, M.; Gutmann, F.; Kappe, K.; Wenz, F.; Straub, T.; Koch, Peter; Stelzer, Ralph; Drossel, Welf-Guntram
Presentation
2020Falzwerkzeug
Eckert, Medardus; Barth, Daniel; Mann, Eckhard
Patent
2020Feasibility of implants with superelastic behaviour for midface reconstruction
Wagner, Maximilian E.H.; Rotsch, Christian; Hanus, Sybille; Essig, Harald; Grunert, Ronny; Gellrich, Nils-Claudius; Lichtenstein, Jürgen
Journal Article
2020Die FED-Methode (Fixation, Elongation, Derotation) - ein gerätegestütztes Behandlungsverfahren zur Behandlung von Patienten mit idiopathischer Skoliose - systematisches Review
Nisser, Jenny; Smolenski, Ulrich; Sliwinski, Grzegorz Eugeniusz; Schumann, Paula; Heinke, Andreas; Malberg, Hagen; Werner, Michael; Elsner, Sophia; Drossel, Welf-Guntram; Sliwinski, Zbigniew; Derlien, Steffen
Journal Article
2020Finite element analysis of load transition on sacroiliac joint during bipedal walking
Toyohara, Ryota; Kurosawa, Daisuke; Hammer, Niels; Werner, Michael; Honda, Keita; Sekiguchi, Yusuke; Izumi, Shin-Ichi; Murakami, Eiichi; Ozawa, Hiroshi; Ohashi, Toshiro
Journal Article
2020Forming induced interface structures for manufacturing hybrid metal composites
Drossel, Welf-Guntram; Riemer, Matthias; Scholz, Peter; Osiecki, Tomasz; Kroll, L.; Frankiewicz, Mariusz; Skomudek, Waldemar
Journal Article
2020Fraunhofer DDMC 2020 special issue of the progress in additive manufacturing journal. Editorial
Brückner, Frank; Bremen, Sebastian; Müller, Bernhard
Editorial
2020Fraunhofer Forschungscluster programmierbare Materialien: Produktentwicklung (PE) & Mechanik (PM)
Lichti, Tobias; Weisheit, Linda; Pretsch, Thorsten
Presentation
2020Fraunhofer-Institut für Werkzeugmaschinen und Umformtechnik. Jahresbericht 2019/2020
 
Annual Report
2020Functionalized structural components with adaptive stiffness for soft robotic applications
Wockenfuß, Wilhelm Richard; Weisheit, Linda; Kaal, William; Rieß, Sebastian
Presentation
2020Funktionalitätsverbesserung von spanenden Werkzeugmaschinen und additive mechatronische Systeme
Wabner, Markus
Dissertation
2020Future AM. The Next Generation of Additive Manufacturing Processes
Schleifenbaum, Johannes Heinrich; Tenbrock, Christian; Emmelmann, Claus; Leyens, Christoph; Brückner, Frank; Michaelis, Alexander
Book Article
2020Gasdruckfeder für den Einsatz in einer Werkzeugvorrichtung, Werkzeugvorrichtung umfassend zumindest eine Gasdruckfeder
Zorn, Wolfgang; Bäume, Tobias
Patent
2020Gathering of Process Data through Numerical Simulation for the Application of Machine Learning Prognosis Algorithms
Jäckel, Mathias; Falk, Tobias; Georgi, Julius; Drossel, Welf-Guntram
Journal Article
2020Geräusche im antiken und im modernen Griechenland: Literarische Akustikszenen von Gerhart Hauptmann
Knöfel, Björn
Conference Paper
2020Gestellbauteil oder Maschinenschlitten einer Werkzeugmaschine sowie ein Verfahren zur Herstellung
Wabner, Markus; Pfeifer, Marko
Patent
2020Gießen & Additiv: Hybride Fertigungsketten für automobile Anwendungen
Polenz, Stefan; Oettel, Markus; Flügel, Sebastian; Kleine, Andreas
Journal Article
2020A holistic approach for the development of a digital twin focused on commissioning and control of electromechanical feed axes
Norberger, M.; Apitzsch, R.; Sewohl, A.; Schlegel, H.; Putz, M.
Conference Paper
2020Hybrid Fibre Reinforced Thermoplastic Hollow Structures with a Multi-Scale Structured Metal Load Introduction Element
Würfel, Veit; Grützner, Raik; Hirsch, Franz; Barfuß, Daniel; Gude, Maik; Müller, Roland; Kästner, Markus
Conference Paper
2020Hybride Fertigungsprozessketten aus Gießen und additiver Fertigung für automobile Anwendungen
Polenz, Stefan; Oettel, Markus; Flügel, Sebastian; Kleine, Andreas
Journal Article
2020Hybride Fertigungsprozessketten Gießen-Additiv. Wie Aluminiumdruckguss gewinnbringend mit der additiven Fertigung kombiniert werden kann
Flügel, Sebastian; Oettel, Markus; Kleine, Andreas; Polenz, Stefan
Conference Paper
2020Hybridfügen durch Fließlochformen
Schmerler, Rico; Grünert, Markus; Rothe, Felix
Study
2020Hybridization for series production - continuous profile production by pultrusion
Löpitz, David; Wagner, David; Knobloch, Marcus; Drossel, Welf-Guntram; Gedan-Smolka, Michaela
Conference Paper
2020Identification and Classification of Color Textures
Mende, Mattias; Wiener, Thomas
Conference Paper
2020Identification and Classification of Color Textures
Mende, Mattias; Wiener, Thomas
Presentation
2020Impact analysis in the ElectroMagnetic Welding (EMW) process with LS-DYNA
Mani, Karthik Kumar
: Scheffler, Christian (Betreuer); Schwarz, Alexander (Gutachter); Bluhm, Joachim
Master Thesis
2020Improvements to a method for determining leg length following total hip arthroplasty
Wendler, Toni; Heilemann, Martin; Grunert, Ronny; Möbius, Robert; Schmidt, Michael; Schleifenbaum, Stefan; Prietzel, Torsten
Journal Article
2020In der Dämpfung liegt die Kraft
Hohlfeld, Jörg; Siebeck, Steve; Jehring, Ulrike; Quadbeck, Peter
Journal Article
2020Industry case study: process chain for manufacturing of a large hybrid hot stamping tool with conformal cooling channels
Muvunzi, R.; Hagedorn-Hansen, D.; Matope, S.; Madyibi, X.; Swart, C.B.; Nagel, M.
Journal Article
2020Influence of a Hydrostatic Pressure Shift on the Flow Stress in Sheet Metal
Coppieters, Sam; Jäckel, Mathias; Kraus, Christian; Kuwabara, Toshihiko; Barlat, Frederic
Journal Article
2020The influence of different sample preparation on mechanical properties of human iliotibial tract
Fischer, B.; Kurz, S.; Höch, A.; Schleifenbaum, S.
Journal Article
2020Influence of the stiffness of burnishing tools on process force and surface quality of EN AW-2007 and C45 workpieces
Stöckmann, Rico; Posdzich, Marco; Klimant, Philipp; Putz, Matthias
Journal Article
2020Information Model of a Digital Process Twin for Machining Processes
Caesar, Birte; Hänel, Albrecht; Wenkler, Eric; Corinth, Christian; Ihlenfeldt, Steffen; Fay, Alexander
Conference Paper
2020Innervation of the hip joint capsular complex: A systematic review of histological and immunohistochemical studies and their clinical implications for contemporary treatment strategies in total hip arthroplasty
Tomlinson, Joanna; Zwirner, Johann; Ondruschka, Benjamin; Prietzel, Torsten; Hammer, Niels
Journal Article
2020Intra-operative detection of a left-sided non-recurrent laryngeal nerve during vagus nerve stimulator implantation
Labuschagne, J.J.; Hammer, N.
Journal Article
2020Inverse Hybrid Laminate for Lightweight Applications
Osiecki, Tomasz; Gerstenberger, Colin; Timmel, Tristan; Frankiewicz, Mariusz; Dziedzic, Robert; Scholz, Peter; Kroll, Lothar
Conference Paper
2020An investigation of abrasive waterjet machining of cubic boron nitride (CBN) with a softer abrasive material
Morczinek, F.; Putz, M.
Journal Article
2020Investigation of the influence of surface waviness of aluminium on the burnishing quality of a combined process
Posdzich, Marco; Stöckmann, Rico; Klimant, Philipp; Putz, Matthias
Journal Article
2020Kompetenzatlas 2020
: Georgi, Lars (Redaktion); Köhler, Alexandra (Redaktion)
Scientific Anthology
2020Kontakterwärmung - Schnelle und energieeffiziente Erwärmungsroute für Leichtbauanwendungen
Schönherr, Julia; Polster, Stefan; Trân, Ricardo
Journal Article
2020Kontinuierliche Produktion von flächigen Halbzeugen aus Faser-Kunststoff-Verbunden
Husemann, Alexander; Freeden, Justus von
Journal Article
2020Laser powder bed fusion of Nd-Fe-B permanent magnets
Bittner, Florian; Thielsch, Juliane; Drossel, Welf-Guntram
Journal Article
2020Mechanical properties of human oral mucosa tissues are site dependent: A combined biomechanical, histological and ultrastructural approach
Choi, J.J.E.; Zwirner, J.; Ramani, R.S.; Ma, S.; Hussaini, H.M.; Waddell, J.N.; Hammer, N.
Journal Article
2020Mechanical properties of native and acellular temporal muscle fascia for surgical reconstruction and computational modelling purposes
Zwirner, Johann; Ondruschka, Benjamin; Scholze, Mario; Schulze-Tanzil, G.; Hammer, Niels
Journal Article
2020Messdatenbasierte Charakterisierung von Körperschallquellen in sechs Freiheitsgraden unter "blocked force"-Randbedingungen
Burkhardt, Martin; Hensel, Eric; Drossel, Welf-Guntram
Conference Paper
2020Messtechnische Charakterisierung geschlossenzelliger Aluminiumschaumstrukturen
Schmerler, Rico; Bräunig, Jan; Hensel, Eric
Conference Paper
2020Messtechnische Charakterisierung und dynamische Simulation von Kunststoffbauteilen
Georgi, Tom; Troge, Jan; Kranz, Burkhard; Diemert, Jan
Conference Paper
2020Metal foams with ceramic inserts for security applications
Vogel, René; Drebenstedt, Claudia; Szyniszewski, Stefan; Bittner, Florian; Fras, Teresa; Blanc, Ludovic
Conference Paper
2020Morphometric and density comparisons of Bos taurus scapulae as a proxy to human frontal crania
Taylor, S.C.; Hammer, N.; Zwirner, J.; Ondruschka, B.; Kieser, D.C.
Journal Article
2020Mould-integrated mechatronic fixture for error compensation in injection over-moulding of optoelectronic devices
Schwarze, Martin; Rentzsch, Hendrik; Perz, Stephan
Presentation
2020Mould-integrated mechatronic fixture for error compensation in injection overmoulding of optoelectronic devices
Rentzsch, Hendrik; Perz, Stephan; Schwarze, Martin
Conference Paper
2020Multi-sensor Data Fusion for In-line Visual Inspection
Pierer, Alexander; Wiener, Thomas; Gjakova, Leutrim; Barthel, Sven; Naumann, Martin; Mende, Mattias; Hoffmann, Michael; Weise, Dieter; Koziorek, Jiri; Bilik, Petr; Groth, Amy
Report
2020Multi-sensor Data Fusion for In-line Visual Inspection. Interview on practical experiences
Pierer, Alexander; Wiener, Thomas; Gjakova, Leutrim; Barthel, Sven; Naumann, Martin; Mende, Mattias; Hoffmann, Michael; Weise, Dieter; Koziorek, Jiri; Bilik, Petr; Groth, Amy
Blog Post
2020Neuartige variable Akustikelemente für musikalische Probenräume
Behrens, Tobias; Knöfel, Björn; Schirmer, Hartmut
Conference Paper
2020Non-cuttable material created through local resonance and strain rate effects
Szyniszewski, Stefan; Vogel, René; Bittner, Florian; Jakubczyk, Ewa; Anderson, Miranda; Pelacci, Manuel; Chinedu, Ajoku; Endres, Hans-Josef; Hipke, Thomas
Journal Article
2020Novel Ultrasonic-Based Joining Methods for Metal-Plastic Composites (MPC)
Riemer, Matthias; Kraus, Christian; Kott, Mathias; Faes, Koen; Korzeniowski, Marcin; Götz, Marc
Presentation
2020Numerically Assisted Design for Electromagnetically Driven Tools
Linnemann, Maik; Scheffler, Christian; Psyk, Verena
Journal Article
2020Numerische Maßhaltigkeitsprognose gefügter Blech-Baugruppen
Drossel, Welf-Guntram; Hensel, Sebastian
Report
2020On the evolution of adiabatic shear bands in the beta titanium alloy Ti-10V-2Fe-3Al
Scholze, Mario; Frint, Philipp; Winter, Sven; Wagner, Martin Franz-Xaver
Presentation
2020On the importance of the innervation of the human cervical longitudinal ligaments at vertebral level
Stegmann, Tina; Steinke, Hanno; Pieroh, Philipp; Dehghani, Faramarz; Völker, Anna; Groll, M.J.; Wolfskämpf, Thomas; Werner, M.; Kollan, J.; Hinz, A.; Leimert, M.
Journal Article
2020Optimierte Verschließtechnologie
Lieber, Thomas
Journal Article
2020Optimization of thick sheet clinching tools using principal component analysis
Schwarz, Christian; Kropp, Thomas; Kraus, Christian; Drossel, Welf-Guntram
Journal Article
2020Optische Messtechnik in der Prozesskette Blech am Beispiel Karosseriefertigung
Ackert, Patrick; Kriechenbauer, Sebastian
Presentation
2020An ossifying bridge - on the structural continuity between the Achilles tendon and the plantar fascia
Zwirner, J.; Zhang, M.; Ondruschka, B.; Akita, K.; Hammer, N.
Journal Article
2020Parallel computing in automation of decoupled fluid-thermostructural simulation approach
Glänzel, Janine; Naumann, Andreas; Kumar, Tharun Suresh
Journal Article
2020Passive load-deformation properties of human temporal muscle
Zwirner, J.; Ondruschka, B.; Scholze, M.; Hammer, N.
Journal Article
2020Performance analysis of the force control for an electromechanical feed axis with industrial motion control
Sewohl, A.; Norberger, M.; Schöberlein, C.; Schlegel, H.; Putz, M.
Conference Paper
2020Performance Evaluation of Offline Motion Preparation Approaches on the Example of a Non-Linear Kinematics
Holowenko, O.; Drowatzky, L.; Ihlenfeldt, S.
Journal Article
2020Poröses Hybridbauteil bestehend aus oxidkeramischen Verbundwerkstoffen und papierabgeleiteter Keramik für Hochtemperaturisolation im Kraftfluss
Demuth, Rico; Domes, Benedikt; Krenkel, Walter; Wamser, Thomas; Puchas, Georg; Knohl, Stefan
Study
2020Process and Bonding Modification for Media-based Forming of Complex Continuous Fiber Reinforced Hybrid Parts
Engelmann, U.; Demmig, S.; Layer, M.; Kroll, L.; Nendel, W.; Drossel, W.-G.; Albert, André; Reese, E.; Harms, T.
Presentation
2020Process Development for a Superplastic Hot Tube Gas Forming Process of Titanium (Ti-3Al-2.5V) Hollow Profiles
Trân, Ricardo; Reuther, Franz; Winter, Sven; Psyk, Verena
Journal Article
2020Process-oriented Flow Curve Determination at Mechanical Joining
Jäckel, Mathias; Coppieters, Sam; Vandermeiren, Nelis; Kraus, Christian; Drossel, Welf-Guntram; Miyake, Noa; Kuwabara, Toshihiko; Unruh, Klaus; Traphöner, Heinrich; Tekkaya, A Erman; Balan, Tudor
Journal Article
2020Processing a biocompatible Ti-35Nb-7Zr-5Ta alloy by selective laser melting
Lisboa Batalha, Rodolfo; Capute Batalha, Weverson; Deng, Liang; Gustmann, Tobias; Pauly, Simon; Kiminami, Claudio Shyinti; Gargarella, Piter
Journal Article
2020Profile cross rolling of high-interstitial austenitic stainless steels for application in plastics extrusion
Forke, Erik; Niederhofer, Philipp; Albrecht, Mirko; Hüllmann, André; Kräusel, Verena; Schneiders, Till; Gehde, Michael
Journal Article
2020Proof of principle of a rotating actuator based on magnetostrictive material with simultaneous vibration amplitude
Titsch, C.; Li, Q.; Kimme, S.; Drossel, W.-G.
Journal Article
2020Properties of a superelastic NiTi shape memory alloy using laser powder bed fusion and adaptive scanning strategies
Gustmann, Tobias; Gutmann, Florian; Wenz, Franziska; Koch, Peter; Stelzer, Ralph; Drossel, Welf-Guntram; Korn, Hannes
Journal Article
2020Publisher correction: Non-cuttable material created through local resonance and strain rate effects
Szyniszewski, Stefan; Vogel, René; Bittner, Florian; Jakubczyk, Ewa; Anderson, Miranda; Pelacci, Manuel; Chinedu, Ajoku; Endres, Hans-Josef; Hipke, Thomas
Journal Article
2020Quantification of fat in the posterior sacroiliac joint region applying a semi-automated segmentation method
Poilliot, Amelie J.; Tannock, Murray; Zhang, Ming; Zwirner, Johann; Hammer, Niels
Journal Article
2020Realistic Haptic Feedback for Material Removal in Medical Simulations
Kaluschke, M.; Weller, R.; Hammer, N.; Pelliccia, L.; Lorenz, M.; Zachmann, G.
Conference Paper
2020Regel- und Verschlusseinrichtung für extrudierten plastisch verformbaren Werkstoff
Kausch, Martin; Blase, Johannes; Uhlmann, Stefan; John, Christopher; Sauerstein, Tobias
Patent
2020Scherschneiden höchstfester Stähle mit fluidischem Gegenhalter
Nestler, Matthias; Galiev, Elmar; Schmidt, Rainer; Psyk, Verena; Winter, Sven; Kräusel, Verena
Journal Article
2020Sensitivity of twin boundary movement to sample orientation and magnetic field direction in Ni-Mn-Ga
Veligatla, M.; Titsch, C.; Drossel, W.-G.; Garcia-Cervera, C.J.; Müllner, P.
Journal Article
2020Sensordatenfusion zur prozessintegrierten Qualitätsüberwachung für fehlerfreie Produkte. Interview zu Erfahrungen aus der Praxis
Pierer, Alexander; Wiener, Thomas; Gjakova, Leutrim; Barthel, Sven; Naumann, Martin; Mende, Mattias; Hoffmann, Michael; Weise, Dieter; Koziorek, Jiri; Bilik, Petr; Groth, Amy
Report
2020Sensorelement zur Erfassung von Dehnungen bei der Bewegung eines Körperteils eines Lebewesens
Mäder, Thomas; Ebrecht, Florian; Sichting, Freddy; Senf, Björn
Patent
2020Sensorsystem und Verfahren zum Erfassen von Verformungen eines Materials
Datzmann, Iryna; Mäder, Thomas; Senf, Björn
Patent
2020Sensorvorrichtung für Druckmessungen von Fluiden, System für Druckmessungen von Fluiden
Krebs, Janine; Walter, Heike; Senf, Björn; Mäder, Thomas; Bucht, André
Patent
2020Simplification of the model of piezoelectric actuator control based on preliminary measurements
Baraniuk, R.; Drossel, W.-G.
Journal Article
2020Simulative investigation of transfer function-based disturbance observer for disturbance estimation on electromechanical axes
Schöberlein, C.; Schleinitz, A.; Schlegel, H.; Putz, M.
Conference Paper
2020Standmengenerhöhung von Schneidaktivelementen beim Scherschneiden federharter Bänder durch die quantitative Charakterisierung und Bewertung fertigungstechnischer Einflussgrößen
Winter, Sven
Report
2020Subchondral bone strength of the sacroiliac joint-a combined approach using computed tomography osteoabsorptiometry (CT-OAM) imaging and biomechanical validation
Poilliot, A.; Li, K.C.; Müller-Gerbl, M.; Toranelli, M.; Zhang, M.; Zwirner, J.; Hammer, N.
Journal Article
2020Surface modification of forming tools for aluminum sheet metal forming
Kuisat, Florian; Abraham, Tim; Schmidt, Torsten; Weber, Martin; Demmler, Matthias; Bräuer, Günter; Lasagni, Andrés Fabián
Journal Article
2020A survey on modeling and forecasting the energy consumption in discrete manufacturing
Reinhardt, Heiner; Bergmann, Jan-Peter; Münnich, Marc; Rein, David; Putz, Matthias
Journal Article
2020Sustainability of industrial components using additive manufacturing and foam materials
Dani, Ines; Drossel, Welf-Guntram; Milaev, Nikolaus; Korn, Hannes; Hannemann, Christian; Hohlfeld, Jörg; Wertheim, Rafael
Journal Article
2020System zur Erfassung von Verformungen an Bearbeitungsmaschinen, Anlagen oder Komponenten davon
Kurth, Robin; Tehel, Robert; Wagner, Nico; Päßler, Thomas
Patent
2020Technology Development for Forming and Joining of Lightweight Components
Psyk, Verena; Schönherr, Julia; Trân, Ricardo; Nestler, Matthias
Presentation
2020Temporal analysis of event-discrete alarm data for improved manufacturing
Reinhardt, Heiner; Bergmann, Jan-Peter; Stoll, Anke; Putz, Matthias
Journal Article
2020Thermo-elastic structural analysis of a machine tool using a multi-channel absolute laser interferometer
Deutsch, J.; Albrecht, T.; Riedel, M.; Penter, L.; Wiemer, H.; Müller, J.; Ihlenfeldt, S.
Journal Article
2020Tool concept for structure rolling to improve tribologically stressed components
Schmidt, Torsten; Schneider, Jörg; Edelmann, Jan
Conference Paper
2020Towards safe service ecosystems for production for value networks and manufacturing monitoring
Lemme, Gordon; Lemme, Diana; Nölscher, Kilian Armin; Ihlenfeldt, Steffen
Journal Article
2020Tribological Investigations on Tool Surfaces for Temperature-Supported Forming of Magnesium AZ31 Sheets
Caetano dos Santos Silva, Bruno; Mendes Rodrigues, Alisson; Müller, Roland; Lora, Fábio André; Luis Ferreira Nascimento, Marcio; Cavalcanti Pinto, Haroldo; Santiago Coelho, Rodrigo
Journal Article
2020Variations in subscapularis muscle innervation - A report on case series
Siwetz, M.; Hammer, N.; Ondruschka, B.; Kieser, D.C.
Journal Article
2020VariPath: A Database for Modelling the Variance of Human Pathways in Manual and HRC Processes with Heavy-Duty Robots
Bdiwi, M.; Harsch, A.-K.; Reindel, P.; Putz, M.
Conference Paper
2020Verbesserte Prozessüberwachung durch hochsensitive CNT-Kraftaufnehmer
Bonitz, Jens; Hamm, Lucas; Müller, Peter; Hermann, Sascha
Journal Article
2020Verfahren und Vorrichtung für die Herstellung von Bauteilen aus dünnen Halbzeugen
Weise, Dieter; Glänzel, Janine; Pierer, Alexander
Patent
2020Verfahren zum Herstellen einer stoffschlüssigen Verbindung von Werkstücken mittels Rührreibschweiße
Mäder, Thomas; Kranz, Burkhard; Hamm, Martin; Wagner, Guntram; Thomä, Marco; Gester, Andreas
Patent
2020Verfahren zur Herstellung von mit Fasern verstärkten Bauteilen aus Kunststoff
Meißner, Sven; Scholz, Sebastian
Patent
2020Verfahren zur Überwachung und Regelung eines Produktionsprozesses mittels multipler Regression
Schwarz, Christian
Patent
2020Verschleißerscheinungen an PM- und HM-Stempeln beim Stanzen
Winter, Sven; Galiev, Elmar; Nestler, Matthias; Psyk, Verena
Journal Article
2020Viability of Bos taurus scapulae as a flat bone proxy for ballistic testing
Taylor, Seth C.; Kieser, David C.; Hammer, Niels; Ondruschka, Benjamin; Kranioti, Elena F.; Pullen, Amy; Hooper, Gary J.
Journal Article
2020Vibroacoustic characterisation methods for polymer materials and components
Rohlfing, J.; Diemert, Jan; Lüssenheide, Susanne; Abdul Hamid, Z.M.; Hohe, J.; Kranz, B.; Georgi, Tom
Conference Paper
2020Voraussage und Optimierung dissipativ bedingter Werkzeugerwärmung
Drossel, Welf-Guntram; Silbermann, Katja
Report
2020Vorgehensmodell zur Simulation von gebündeltem Energiebedarf
Jacobsen, Benjamin; Stange, Maximilian
Conference Paper
2020Vorrichtung zum dreidimensionalen Ab- oder Verlegen von mit einer Ummantelung versehenen Filamenten
Löffler, David; Dani, Ines; Meltke, Robert; Knobloch, Marcus
Patent
2020Vorrichtung zur additiven Fertigung von dreidimensionalen Bauteilen
Töppel, Thomas; Wiemer, Hajo
Patent
2020Vorrichtung zur Beeinflussung des Volumenstroms von extrudiertem plastisch verformbaren Werkstoff
Kausch, Martin; Blase, Johannes; Uhlmann, Stefan; John, Christopher; Sauerstein, Tobias
Patent
2020Wechselseitige Synchronisierung in Supply Chains
Büttner, Thomas; Wenzel, Ken; Stange, Maximilian; Fischer, Markus
Journal Article
2020Werkzeugintegrierte Sensorik zur Onlineüberwachung von Fräsprozessen
Ettrichrätz, Martin; Gebhardt, Sylvia
Journal Article
2020What is considered a variation of biomechanical parameters in tensile tests of collagen-rich human soft tissues?
Zwirner, J.; Scholze, M.; Ondruschka, B.; Hammer, N.
Journal Article
2020Working gap analysis in electrochemical precision machining of external geometries with ring cathodes
Schaarschmidt, I.; Hackert-Oschätzchen, M.; Meichsner, G.; Steinert, P.; Zinecker, M.; Schubert, A.
Journal Article
20193-Dimensional Aortic Model to Create a Fenestrated Stent Graft for the Urgent Treatment of a Paravisceral Penetrating Aortic Ulcer
Branzan, D.; Winkler, D.; Schmidt, A.; Scheinert, D.; Grunert, R.
Journal Article
20193. Fachseminar Wälzschälen/Power-Skiving 2019
 
Conference Proceedings
20194 x 2D visual Servoing approach for advanced Robot applications
Bdiwi, Mohamad; Suchy, Jozef; Putz, Matthias
Book Article
20196th ICAFT – International Conference on Accuracy in Forming Technology, 25th SFU – Saxon Conference on Forming Technology, 6th AutoMetForm – International Lower Silesia – Saxony Conference on Advanced Metal Forming Processes in the Automotive Industry 2018
: Drossel, Welf-Guntram; Putz, Matthias; Mauermann, Reinhard; Wertheim, Rafael
Conference Proceedings
2019Additiv-Guss ein neuartiger Hybridansatz für automobile Anwendungen
Oettel, Markus; Flügel, Sebastian; Polenz, Stefan; Kleine, Andreas; Gebauer, Mathias; Müller, Bernhard
Conference Paper
2019Additive Fertigung und Guss - ein neuartiger Hybridansatz
Oettel, Markus; Polenz, Stefan; Flügel, Sebastian; Kleine, Andreas; Schrader, Andreas
Internet Contribution
2019Additive Multimaterial-Fertigung durch Kombination aus Laserstrahlschmelzen und Pastenextrusion
Jaretzki, Martin; Fichtner, Juliane; Töpfer, Friedrich
Presentation
2019Advanced Control Algorithms to Suppress High-Frequency PWM Current and Force Harmonics in Highly Integrated Electric Vehicle Drives
Windisch, Thomas; Bräunig, Jan; Troge, Jan; Drossel, Welf-Guntram
Conference Paper
2019Aluminum Foam Sandwich Battery Housing for Electric Cars
Schmerler, Rico; Hipke, Thomas; Schuller, Friedrich; Richter, Alexander
Presentation
2019Analyse elastischer Wechselwirkungen an Servo-Spindelpressen
Müller, Peter
Dissertation
2019Analysis of manufacturing processes for metallic and composite bipolar plates
Porstmann, Sebastian; Petersen, Allan Christian; Wannemacher, Thomas
Conference Paper
2019Analysis of workpiece thermal behaviour in cut-off grinding of high-strength steel bars to control quality and efficiency
Putz, Matthias; Cardone, Macario; Dix, Martin; Wertheim, Rafael
Journal Article
2019Anterior cervical spine blood supply: A cadaveric study
Dunbar, L.; Vidakovic, H.; Löffler, S.; Hammer, N.; Gille, O.; Boissiere, L.; Obeid, I.; Pointillart, V.; Vital, J.M.; Kieser, D.C.
Journal Article
2019Antriebsgestaltung eines hydraulischen Pressen-Ziehkissens zur hochfrequent wechselnden Krafteinbringung
Pierschel, Norbert
Study
2019Application of load adapted hybrid textiles for a thermoplastic seat pass-through
Schreiter, Michael; Nebel, Daniel; Körner, Enrico; Saleem, Arham; Schlegel, Manuel
Presentation
2019Applikationsbezogene Gefügeoptimierung von magnetischen Formgedächtnisaktoren
Böhm, Andrea; Panesso, Miguel; Pagel, Kenny; Drossel, Welf-Guntram
Presentation
2019Automatic bead position calculation for hem flange bonding
Eckert, Medardus; Weber, Johannes; Hecht, Benjamin; Drossel, Welf-Guntram; Rösinger, Markus
Journal Article
2019Automatisierungstechnik - Potentiale für die Zukunft. 5. Sächsischer Tag der Automation 2019
: Georgi, Lars (Hrsg.); Köhler, Alexandra (Hrsg.)
Conference Proceedings
2019Autonome Konstruktion und Generative Design
Müller, Bernhard; Milaev, Nikolaus
Book Article
2019Bearbeitung komplexer Großbauteile mit mobilen Werkzeugmaschinen
Rentzsch, Hendrik; Witt, Susanne; Schwenke, Heinrich
Journal Article
2019Bearbeitungskopf
Paizs, Tibor; Stein, Hans
Patent
2019Begleitbroschüre zum Fachkräftetag "Branchennachwuchs trifft Industrie" 2019
Köhler, Alexandra
Conference Proceedings
2019Biointelligenz. Eine neue Perspektive für nachhaltige industrielle Wertschöpfung
Beckett, Marc; Demmer, Axel; Elfert, Patrik; Full, Johannes; Hellmich, Arvid; Hien, Katharina; Hinxlage, Julian; Horbelt, Jessica; Jutz, Günther; Krieg, Sabine; Maufroy, Christophe; Miehe, Robert; Noack, Marian; Sauer, Alexander; Schließmann, Ursula; Scholz, Patrick; Schwarz, Oliver; Wrycza, Philipp
: Bauernhansl, Thomas (Hrsg.); Brecher, Christian (Hrsg.); Drossel, Welf-Guntram (Hrsg.); Gumbsch, Peter (Hrsg.); Ten Hompel, Michael (Hrsg.); Wolperdinger, Markus (Hrsg.)
Study
2019Biological transformation and technologies used for manufacturing of multifunctional metal-based parts
Drossel, Welf-Guntram; Dani, Ines; Wertheim, Rafael
Journal Article
2019A biomechanical comparison between human calvarial bone and a skull simulant considering the role of attached periosteum and dura mater
Ondruschka, B.; Lee, J.H.C.; Scholze, M.; Zwirner, J.; Tong, D.; Waddell, J.N.; Hammer, N.
Journal Article
2019Buckling analysis of an imperfection-insensitive hybrid composite cylinder under axial compression
Wagner, H.N.R.; Petersen, E.; Khakimova, R.; Hühne, C.
Journal Article
2019Burnishing of prismatic workpieces on three-axis machine enabled by closed loop force control
Posdzich, Marco; Schöberlein, Chris; Quellmalz, Johannes; Putz, Matthias
Journal Article
2019Casting + Additive Manufacturing. New production process chains for hybrid components
Flügel, Sebastian; Müller, Bernhard; Kleine, Andreas; Eibisch, Harald
Presentation
2019The Challenge of Open Cellular Metal Foam Production
Hannemann, Christian; Uhlig, Mandy; Hipke, T.; Meier, I.; Hohlfeld, Jörg
Presentation
2019Chroniksplitter. Ein Beitrag zur Geschichte des Fraunhofer-Instituts für Werkzeugmaschinen und Umformtechnik IWU
Jung, Hans
: Drossel, Welf-Guntram
Book
2019Close-to-process strain measurement in ultrasonic vibration-assisted turning
Kimme, S.; Hafez, N.; Titsch, C.; Werner, J.M.; Nestler, A.; Drossel, W.-G.
Journal Article
2019Closed Cell Aluminum Foam Products Infiltrated with Phase Change Material (PCM) Used for Battery Housing Applications of Electric Cars
Schmerler, Rico; Hipke, Thomas; Drossel, Welf-Guntram
Presentation
2019Combined and Fast Computable Thermal Models for Situationally Optimal Tempering of Machine Tool Components
Weber, Juliane; Glänzel, Janine; Popken, Jens; Shabi, Linart; Weber, Jürgen
Journal Article
2019A concept for a 3D-printed patient-specific stereotaxy platform for brain biopsy -a canine cadaver study-
Müller, Marcel; Winkler, Dirk; Möbius, Robert; Sauerstein, Tobias; Scholz, Sebastian; Gutmann, Sarah; Flegel, Thomas; Meixensberger, Jürgen; Drossel, Welf-Guntram; Grunert, Ronny
Journal Article
2019Considering Energy-Related Factors in the Simulation of Logistics Systems
Poeting, Moritz; Prell, Bastian; Rabe, Markus; Uhlig, Tobias; Wenzel, Sigrid
Conference Paper
2019Consumption of sheep milk compared to cow milk can affect trabecular bone ultrastructure in a rat model
Burrow, K.; Young, W.; Carne, A.; McConnell, M.; Hammer, N.; Scholze, M.; Bekhit, A.E.
Journal Article
2019Crash-loaded structural components: Efficient lightweight design through intrinsic hybridization
Riemer, Matthias; Kießling, Robert; Dittes, Axel; Schwöbel, Stephan-Daniel; Scharf, Ingolf; Scholze, Mario; Böhme, M.; Drossel, Welf-Guntram; Ihlemann, Jörn; Lampke, Thomas; Wagner, Martin F.-X.
Presentation
2019Database on potential customers and related, specific business cases divided by use case
Porstmann, Sebastian; Wannemacher, Thomas
Report
2019DE 10 2010 026 436.9. "Elektrische Verbindungsvorrichtung"
Pagel, Kenny
Presentation
2019Decision tree-based machine learning to optimize the laminate stacking of composite cylinders for maximum buckling load and minimum imperfection sensitivity
Wagner, H.N.R.; Köke, H.; Dähne, S.; Niemann, S.; Hühne, C.; Khakimova, R.
Journal Article
2019Deduction of time-dependent machine tool characteristics by fuzzy-clustering
Frieß, Uwe; Kolouch, Martin; Putz, Matthias
Conference Paper
2019Demo: Wireless sensor network for retrofitting production systems
Lemme, Gordon; Nölscher, Kilian
Conference Paper
2019Design and simulation-based analysis of a test bed for two-dimensional kinematically coupled force compensation
Ihlenfeldt, S.; Müller, J.; Peukert, C.; Merx, M.
Journal Article
2019Design approach for high-dynamic planar motion systems based on the principle of kinematically coupled force compensation
Ihlenfeldt, S.; Müller, J.; Merx, M.; Peukert, C.
Journal Article
2019Detection of the Force Distribution Close to the Effective Site in Forming Machines for a Force Control
Schleinitz, Armin; Sewohl, André; Schlegel, Holger; Putz, Matthias
Conference Paper
2019Development and design of a drive unit enabling electrochemical orbiting with high dynamics
Georgi, Oliver; Rentzsch, Hendrik; Schoesau, René; Edelmann, Jan; Meichsner, Gunnar
Conference Paper
2019Development and validation of bone models using structural dynamic measurement methods
Neupetsch, Constanze; Hensel, Eric; Werner, Michael; Meißner, Sven; Troge, Jan; Drossel, Welf-Guntram; Rotsch, Christian
Journal Article
2019Development of a Friction Welded Joint for Future Industrial Application
Schubert, Nadine; Sterzing, Andreas; Mauermann, Reinhard; Hilbers, Sören; Kolbe, Peter; Kuhn, Christian
Conference Paper
2019Development of a Method to Increase Flexibility and Changeability of Supply Contracts in the Automotive Industry
Niemann, Jens; Seisenberger, Stephan; Schlegel, Andreas; Putz, Matthias
Journal Article
2019Development of additively manufactured miniature heat exchangers
Milaev, Nikolaus; Kordaß, Richard; Bolle, Maksym; Müller, Bernhard
Poster
2019Development of an innovative lightweight piston through process combination "casting - forging"
Krüger, Lutz; Jentsch, Eric; Brunke, Leonie; Keßler, Andreas; Wolf, Gotthard; Lehnert, Tim; Schubert, Nadine; Wagner, Andre; Landgrebe, Dirk
Journal Article
2019Development of Innovative Combustion Chamber Components for Large Marine Engines
Lehnert, Tim; Sterzing, Andreas; Mauermann, Reinhard; Schubert, Nadine; Krüger, Lutz; Keßler, Andreas; Wolf, Gotthard; Wagler, Hans
Conference Paper
2019Development of Steps in an Automated Process Chain for Piezoceramic-Metal Compound Production
Drossel, Welf-Guntram; Nestler, Matthias; Hensel, Sebastian
Journal Article
2019Drive Unit Enabling Electrochemical Orbiting with High Dynamics and High Accuracy
Schoesau, René; Rentzsch, Hendrik; Georgi, Oliver; Meichsner, Gunnar; Peter, Willy; Edelmann, Jan
Conference Paper
2019Duplicated Vagus Nerve in Adolescence: Case Report and Review of Literature
Labuschagne, J.J.; Hammer, N.
Journal Article
2019Early Virtual Reality User Experience and Usability Assessment of a Surgical Shape Memory Alloy Aspiration/Irrigation Instrument
Lorenz, Mario; Neupetsch, Constanze; Rotsch, Christian; Klimant, Philipp; Hammer, Nils
Conference Paper
2019Effects of cooling lubricant on the thermal regime in the working space of machine tools
Bräunig, Michael; Regel, Joachim; Glänzel, Janine; Putz, Matthias
Journal Article
2019Effects of Cutting the Sacrospinous and Sacrotuberous Ligaments
Hammer, N.; Höch, A.; Klima, S.; Joncour, J.B. le; Rouquette, C.; Ramezani, M.
Journal Article
2019Effects of hot chips in dry cutting processes on the temperature field and displacement of the machine table of machine tools
Albrecht, T.; Thiem, X.; Penter, L.; Ihlenfeldt, S.
Journal Article
2019Effects of variation in measurement chain on temperature measurement calibration with resistant temperature sensors
Deutsch, Jessica; Riedel, Mirko; Müller, Jens; Ihlenfeldt, Steffen
Journal Article
2019EFORMIN. Einsatz von Formgedächtnisaktoren in minimalinvasiven chirurgischen Instrumenten
Werner, Michael; Braun, Dennis; Weik, David; Elsner, Sophia
Poster
2019Einfluss der Bauplattentemperierung auf die Umwandlungseigenschaften einer generativ verarbeiteten Cu-11,85Al-3,2Ni-3Mn-Formgedächtnislegierung
Gustmann, Tobias; Thielsch, Juliane; Kühn, Uta; Pauly, Simon
Poster
2019Einsatz einer Industrie 4.0-Potenzialanalyse zur methodischen und strukturierten Identifikation von Digitalisierungsmöglichkeiten
Münnich, Marc; Süße, Marian; Bolev, Dimitri; Langer, Tino
Book Article
2019Einsatz von Formgedächtnislegierungen in einem modularen Instrument für die minimal-invasive Chirurgie
Braun, Dennis; Weik, David; Elsner, Sophia; Werner, Michael
Presentation
2019Einsatz von Industrierobotern für den fünfachsigen 3D-Druck
Rupf, Stefan
: Putz, Matthias (BetreuerIn); Schlegel, Holger (BetreuerIn); Naumann, Martin (BetreuerIn); Pierer, Alexander (BetreuerIn)
Master Thesis
2019Einsatzpotenzial additiver Fertigung im Werkzeug- und Formenbau
Gebauer, Mathias; Oettel, Markus; Müller, Bernhard
Presentation
2019Electromagnetic Forming of Design Elements
Linnemann, Maik; Psyk, Verena; Scheffler, Christian; Drossel, Welf-Guntram
Conference Paper
2019Energieflexible Produktionssteuerung - Status quo und Perspektiven
Stange, Maximilian; Prell, Bastian; Büttner, Thomas; Richter, Mark
Conference Paper
2019Energy - information regularities of increasing productivity in metalworking machine tools
Kuznetsov, Alexander P.; Koriath, Hans-Joachim
Conference Paper
2019Enhanced service modelling for flexible demand-driven implementation of human-robot interaction in manufacturing
Delang, Kathleen; Todtermuschke, Marcel; Schmidt, Patrick-Alexander; Bdiwi, Mohamad; Putz, Matthias
Journal Article
2019Entwicklung eines formflexiblen Saug-/Spülsystems auf Basis von Formgedächtnislegierungen für die Wirbelsäule
Neupetsch, Constanze; Lorenz, Mario; Braun, Dennis; Leimert, Mario; Rotsch, Christian; Klimant, Philipp; Drossel, Welf-Guntram
Poster
2019Entwicklung eines zweistufigen Berechnungsmodells zum kontinuierlichen Wälzschleifen
Rößler, Maximilian
: Bauer, Ruben
Master Thesis
2019Entwicklung und Erprobung einer Schulung zur MRK-Sensibilisierung von Auszubildenden in der Automobilindustrie
Müller, Lars; Keppler, Richard; Erler, Felix; Delang, Kathleen; Brämer, Stefan
Journal Article
2019Entwicklungstrends im metallischen 3D-Druck
Müller, Bernhard; Töppel, Thomas
Conference Paper
2019Experimental analysis of the elastic boundary conditions of press machines for modelling the deep-drawing process
Müller, Peter; Kriechenbauer, Sebastian; Drossel, Welf-Guntram
Journal Article
2019Experimental and numerical analysis of incremental magnetic pulse welding of dissimilar sheet metals
Psyk, Verena; Linnemann, Maik; Scheffler, Christian
Journal Article
2019External fixation of unstable pelvic fractures: a systematic review and meta‐analysis
Stewart, R.G.; Hammer, N.; Kieser, D.C.
Journal Article
2019Fast and cost efficient measuring of geometry and temperature for open-die forging
Riedel, Mirko; Wiese, Torben; Hellmich, Arvid; Ihlenfeldt, Steffen
Journal Article
2019FC³ - 1st Fuel Cell Conference Chemnitz 2019. Konferenzband
: Unwerth, Thomas von (Hrsg.); Drossel, Welf-Guntram (Hrsg.)
Conference Proceedings
2019Finite element simulations on the relation of microstructural characteristics and the formation of different types of adiabatic shear bands in a β-titanium alloy
Winter, Sven; Pfeiffer, Steffen; Bergelt, Tim; Wagner, Martin Franz-Xaver
Conference Paper
2019FIT-4-AMANDA - STACK-ROBOTER AUSGELIEFERT. Automatische Fertigungsanlage für PEM-Stacks
Porstmann, Sebastian; Biák, Martin
Journal Article
2019Flexibilisierung und Individualisierung automobiler Serienproduktion durch die Verbindung von Druckgießen und additiver Fertigung
Oettel, Markus; Kleine, Andreas; Flügel, Sebastian; Polenz, Stefan; Schrader, Andreas; Eibisch, Harald; Fischer, Rainer
Presentation
2019Formgedächtnis - Ein Material, das zaubern kann. Das Potential einer spannenden Legierung
Gustmann, Tobias; Korn, Hannes; Gutmann, Florian; Wenz, Franziska; Rotsch, Christian; Töppel, Thomas; Koch, Peter; Stelzer, Ralph; Drossel, Welf-Guntram
Presentation
2019Forming 4.0: Smart machine components applied as a hybrid plain bearing and a tool clamping system
Kurth, Robin; Tehel, Robert; Päßler, Thomas; Putz, Matthias; Wehmeyer, Klaus; Kraft, Christian; Schwarze, Hubert
Journal Article
2019Formwerkzeug
Kausch, Martin; Mauermann, Franz; Stein, Jens
Patent
2019Fraunhofer-Institut für Werkzeugmaschinen und Umformtechnik. Jahresbericht 2018/2019
 
Annual Report
2019Frequency and intensity of pulmonary bone marrow and fat embolism due to manual or automated chest compressions during cardiopulmonary resuscitation
Ondruschka, B.; Baier, C.; Bernhard, M.; Buschmann, C.; Dreßler, J.; Schlote, J.; Zwirner, J.; Hammer, N.
Journal Article
2019Füllmassen für Maschinenbetten im Vergleich
Hipke, Thomas; Schneider, Frank; Sagmeister, Bernhard
Journal Article
2019Functionalization of Components by Additive Manufacturing
Gebauer, Mathias; Oettel, Markus; Müller, Bernhard
Presentation
2019Funktionale Hybridtextilien mit passiven und aktiven Metall-Monofilamenten
Drossel, Welf-Guntram; Mehner, Jan; Nestler, D.; Wagner, Martin F.-X.; Auerswald, Christian; Elibol, Cagatay; Helbig, Frank; Kolonko, Angelika; Senf, Björn
Book Article
2019Funktionsoberflächen - Auslegung, Fertigung und Bewertung in der angewandten Forschung
Edelmann, Jan
Presentation
2019Funktionsoberflächen für den Werkzeugbau zum Pressen und Lackieren glasfaserverstärker Kunststoffe
Schneider, Jörg
Conference Paper
2019Geometric imperfection and lower-bound analysis of spherical shells under external pressure
Wagner, H.N.R.; Hühne, C.; Zhang, J.; Tang, W.; Khakimova, R.
Journal Article
2019Geringer Verbrauch: Weniger ist mehr Reduktion und Effzienz als Wettbewerbsvorteil. Interview mit Mark Richter
: Richter, Mark
Report
2019Greifsystem
Hesse, Johann; Rössinger, Markus; Unger, Erik
Patent
2019Greifvorrichtung für einen Roboter
Jäger, Erik; Meier-Maletz, Frank; Unger, Erik
Patent
2019Hem flange bonding: a challenging joining process in automotive body construction
Jesche, Fred; Menzel, Sandra
Presentation
2019Herausforderungen in der Mikrozerspanung
Kuche, Yves; Eckert, Udo
Presentation
2019High-Speed Incremental Forming - New Technologies For Flexible Production Of Sheet Metal Parts
Linnemann, Maik; Psyk, Verena; Djakow, Eugen; Springer, Robert; Homberg, Werner; Landgrebe, Dirk
Journal Article
2019Holistische mehrkriterielle Optimierung der Schlichtbearbeitung
Mauermann, Reinhard; Fiedler, Maik; Hochmuth, Carsten; Frieß, Uwe
Report
2019Hololens AR - Using Vuforia-based marker tracking together with text recognition in an assembly scenario
Knopp, Sebastian; Klimant, Phillipp; Schaffrath, Robert; Voigt, Eric; Fritzsche, Rayk; Allmacher, Christopher
Conference Paper
2019Hot tube forming
Billur, Eren; Schieck, Frank
Book Article
2019How much force is required to perforate a colon during colonoscopy?
Johnson, S.; Schultz, M.; Scholze, M.; Smith, T.; Woodfield, J.; Hammer, N.
Journal Article
2019How to Avoid Posterior Interosseous Nerve Injury during Single-Incision Distal Biceps Repair Drilling
Becker, D.; Lopez-Marambio, F.A.; Hammer, N.; Kieser, D.
Journal Article
2019Hybride Bearbeitungsprozesse - Schwerpunkt schwingungsüberlagerte Bearbeitung
Hochmuth, Carsten; Georgi, Oliver
Presentation
2019Hybride Bearbeitungsprozesse in der Zerspanung - Definition und Potentiale für die Hochleistungsbearbeitung
Georgi, Oliver
Presentation
2019Identification in the Frequency Domain of Mechanically Coupled Axes on Servo-Screw Presses
Kirchner, Henry; Quellmalz, Johannes; Schlegel, Holger; Müller, Peter
Conference Paper
2019Identification of relevant parameters for the metrological adjustment of thermal machine models
Schröder, Steffen; Kauschinger, Bernd; Hellmich, Arvid; Ihlenfeldt, Steffen; Phetsinorath, Damien
Journal Article
2019Identifikation eines Versagens-, Schädigungsmodells in LS-DYNA
Wu, Zhenkai
: Scheffler, Christian (Betreuer)
Bachelor Thesis
2019Implementation of the machine tool-specific current and voltage control characteristics in multiphysics simulation of electrochemical precision machining
Schaarschmidt, Ingo; Hackert-Oschätzchen, Matthias; Meichnser, Gunnar; Zinecker, Mike; Schubert, Andreas
Journal Article
2019In Silico Pelvis and Sacroiliac Joint Motion: Refining a Model of the Human Osteoligamentous Pelvis for Assessing Physiological Load Deformation Using an Inverted Validation Approach
Ramezani, M.; Klima, S.; Herverie, P.L.C. de la; Campo, J.; Joncour, J.B. le; Rouquette, C.; Scholze, M.; Hammer, N.
Journal Article
2019In-silico pelvis and sacroiliac joint motion - A review on published research using numerical analyses
Hammer, N.; Klima, S.
Journal Article
2019Increased thermal inertia of ball screws by using phase change materials
Voigt, Immanuel; Navarro Y De Sosa, Iñaki; Wermke, Benjamin; Bucht, Andre; Drossel, Welf-Guntram
Journal Article
2019Increasing flexibility of self-pierce riveting using numerical and statistical methods
Falk, Tobias; Jäckel, Mathias
Journal Article
2019Incremental sheet metal forming on the example of car exterior skin parts
Scheffler, Sören; Pierer, Alexander; Scholz, Peter; Melzer, Sebastian; Weise, Dieter; Rambousek, Zdeněk
Journal Article
2019Individuelle Funktionalisierung von Bauteilen
Frauendorf, Moritz; Eckert, Medardus; Weber, Johannes; Bucht, André; Drossel, Welf-Guntram
Journal Article
2019Industrie 4.0 in der mechanischen Fügetechnik - Simulationsbasierte Einrichtung der Setzprozessüberwachung mechanischer Fügeverfahren
Kropp, Thomas; Fuchs, Normen; Nehls, Thomas; Henkel, Knuth-Michael
Journal Article
2019Industrie 4.0 in der mechanischen Fügetechnik - Simulationsbasierte Einrichtung der Setzprozessüberwachung mechanischer Fügeverfahren. Teil 2
Fuchs, N.; Nehls, T.; Henkel, K.-M.; Kropp, T.
Journal Article
2019Influence of Basic Process Parameters on Mechnical and Internal Properties of 316L Steel in SLM Process for Renishaw AM400
Hajnys, Jiri; Pagac, Marek; Petru, Jana; Kotera, Ondrej; Scholz, Sebastian
Journal Article
2019Influence of cutting edge radius on process forces in orthogonal machining of carbon fibre reinforced plastics (CFRP)
Sauer, Konstantin; Witt, Marco; Putz, Matthias
Journal Article
2019Influence of substrate plate heating on the properties of an additively manufactured Cu-Al-Ni-Mn shape-memory alloy
Gustmann, Tobias; Thielsch, Juliane; Kühn, Uta; Pauly, Simon
Conference Paper
2019Influence of substrate plate heating on the properties of an additively manufactured Cu-Al-Ni-Mn shape-memory alloy
Gustmann, Tobias; Thielsch, Juliane; Kühn, Uta; Pauly, Simon
Presentation
2019The influence of thrust force on the vitality of bone chips harvested for autologous augmentation during dental implantation
Achour, Anas Ben; Petto, Carola; Meißner, Heike; Hipp, Dominik; Nestler, Andreas; Lauer, Günter; Teicher, Uwe
Journal Article
2019Influence on the microstructure of powder metallurgical metal foam by means of mechanical alloying
Siebeck, Steve; Trautmann, Maik; Hohlfeld, Jörg; Hipke, Thomas; Wagner, Guntram
Conference Paper
2019Inline production of multi-material pultrusion profiles
Löpitz, David; Wagner, David
Poster
2019Inline-Qualitätsüberwachung beschichtet, metallischer Bipolarplatten nach dem Umformprozess
Wiener, Thomas; Pierer, Alexander; Gjakova, Leutrim; Hoffmann, Michael; Barthel, Sven
Conference Paper
2019Innovationen für die Therapie von Kopf bis Fuß
Rotsch, Christian; Werner, Michael
Report
2019Integrating Tactile Feedback in an Acetabular Reamer for Surgical VR-Training
Weik, David; Lorenz, Mario; Knopp, Sebastian; Pelliccia, Luigi; Feierabend, Stefanie; Rotsch, Christian; Klimant, Philipp
Conference Paper
2019Integration magnetischer Funktionalitäten in laserstrahlgeschmolzene Metallkomponenten für neuartige sensorische Anwendungen
Bittner, Florian; Thielsch, Juliane
Presentation
2019Integration of Camera and Inertial Measurement Unit for Entire Human Robot Interaction Using Machine Learning Algorithm
Haghighi, Azam; Bdiwi, Mohamad; Putz, Matthias
Conference Paper
2019Integration of sensory-diagnostic and actuator therapeutic functions in implants
Lausch, Holger; Töppel, Thomas
Book Article
2019The intelligent factory space - a concept for observing, learning and communicating in digitalized factory
Reimann, Jan; Sziebig, Gabor
Journal Article
2019Intelligent workpiece carrier with inertial sensors for monitoring and optimizing manufacturing processesIntelligenter Werkstückträger mit Inertialsensorik zum Überwachen und Optimieren von Fertigungsprozessen
Forke, Roman; Forke, Erik; Alalus, Mohaned Khaled; Weidlich, Sebastian; Bülz, Daniel
Conference Paper
2019Intra- and interrater reliabilities and a method comparison of 2D and 3D techniques in cadavers to determine sacroiliac screw loosening
Pieroh, P.; Lenk, M.; Hohmann, T.; Grunert, R.; Wagner, D.; Josten, C.; Höch, A.; Böhme, J.
Journal Article
2019Intrinsic hybrid composite combining in-situ generated form-fit and an innovative interfacial coating
Dittes, Axel; Riemer, Matthias; Kießling, Robert; Böhme, Marcus; Scholze, Mario; Scharf, Ingolf; Schwöbel, Stephan Daniel; Wagner, Martin Franz-Xaver; Drossel, Welf-Guntram; Ihlemann, Jörn; Lampke, Thomas
Conference Paper
2019Investigation of local and modal based active vibration control strategies on the example of an elastic system
Peukert, C.; Pöhlmann, P.; Merx, M.; Ihlenfeldt, S.; Müller, J.
Journal Article
2019Investigation of the dynamic behavior of machine tools during cutting by operational modal analysis
Berthold, Jan; Regel, Joachim; Putz, Matthias; Kolouch, Martin
Journal Article
2019An Investigation on the Correlation between the Mechanical Properties of Human Skull Bone, Its Geometry, Microarchitectural Properties, and Water Content
Lee, J.H.C.; Ondruschka, B.; Falland-Cheung, L.; Scholze, M.; Hammer, N.; Tong, D.C.; Waddell, J.N.
Journal Article
2019Kinematically coupled force compensation - experimental results and advanced design for the 1D-implementation
Ihlenfeldt, S.; Müller, J.; Merx, M.; Peukert, C.
Journal Article
2019Kinematics of Cross Wedge Rolling
Lorenz, Bernd; Streit, Uwe
: Landgrebe, Dirk; Schindler, Susanne; Mauermann, Reinhard
Book
2019Kinematics of the Lumbo-Pelvic Complex under Different Loading Conditions
Weidling, Martin; Voigt, Christian; Wendler, Toni; Heilemann, Martin; Werner, Michael; Jarvers, Jan-Sven; Heyde, Christoph-E.
Journal Article
2019Klemmbares Konturstück und Spannvorrichtung mit mindestens einem klemmbaren Konturstück
Jäger, Erik; Keller, Carsten; Meier-Maletz, Frank
Patent
2019Kompetenzatlas 2019
Georgi, Lars; Köhler, Alexandra
Book
2019Kompetenzatlas 2019
Georgi, Lars; Köhler, Alexandra
Book
2019Komplementäres Konzept zur blasenfreien Nahtabdichtung von Falzklebungen. Schlussbericht
Neumann, Ivo; Menzel, Sandra; Fricke, Holger; Mayer, Bernd; Landgrebe, Dirk; Jesche, Fred
Report
2019Künstliche Intelligenz - wie können KMU KI nutzen?
Lemme, Gordon; Ihlenfeldt, Steffen
Presentation
2019Kunststoff-Hinterspritzen von CVD-Diamantfolien
Scholz, Peter; Haase, Rico
Study
2019Laser Beam Melting (LBM) - A Laser-based Powder Bed Fusion (L-PBF) Addtive Manufacturing Process
Müller, Bernhard
Presentation
2019Lebensdauer von Profilschienenführungen. Teil 1: Entwicklung einer vereinfachten wälzkontaktbezogenen Lebensdauerprognose von Profilschienenführungen
Ihlenfeldt, S.; Müller, J.; Staroszyk, D.
Journal Article
2019Linked Data Architecture for Assistance and Traceability in Smart Manufacturing
Friedemann, Marko; Wenzel, Ken; Singer, Adrian
Conference Paper
2019Load and energy management for factories through multi-stage production planning and optimization
Süße, Marian; Prell, Bastian; Stoldt, Johannes; Strehle, Hanns-Martin; Richter, Mark; Schlegel, Andreas; Putz, Matthias
Journal Article
2019Makroskopische Reibwertsteuerung durch elektrochemische Potentiale mit ionischen Flüssigkeiten
Gatti, F.; Amann, T.; Kailer, A.; Abicht, Johannes; Rabenecker, P.; Baltes, N.; Rühe, J.
Journal Article
2019Maschinen- und Anlagenbau
Putz, Matthias; Böhme, Jeannette; Büttner, Thomas; Gentzen, Jens; Päßler, Thomas; Prell, Bastian; Reinhardt, Heiner; Richter, Mark; Strehle, Hanns-Martin
Book Article
2019Material- und Werkstoffentwicklung am Fraunhofer IWU
Löpitz, David; Lies, Carsten
Presentation
2019Mechanical and morphological description of human acellular dura mater as a scaffold for surgical reconstruction
Zwirner, J.; Ondruschka, B.; Scholze, M.; Schulze-Tanzil, G.; Hammer, N.
Journal Article
2019Mechanical Properties of Human Dura Mater in Tension - An Analysis at an Age Range of 2 to 94 Years
Zwirner, J.; Scholze, M.; Waddell, J.N.; Ondruschka, B.; Hammer, N.
Journal Article
2019Media Based Forming and Injection Molding Based on Fiber Reinforced Plastic Tubes
Albert, André; Werner, Markus; Landgrebe, Dirk; Drossel, Welf-Guntram; Layer, Markus; Engelmann, Udo; Kroll, Lothar
Journal Article
2019Melt Pool Monitoring using Fuzzy Based Anomaly Detection in Laser Beam Melting
Boos, Eugen; Schwarzenberger, Michael; Jaretzki, Martin; Wiemer, Hajo; Ihlenfeldt, Steffen
Presentation
2019Method for capacity planning of changeable production systems in the electric drives production
Niemann, Jens; Schlegel, Andreas; Putz, Matthias
Conference Paper
2019Method for Optimizing Supply Chain Flexibility in the Production of Electrified Powertrains
Niemann, Jens; Breschan, Daniel; Schlegel, Andreas; Putz, Matthias
Conference Paper
2019Methode für die Charakterisierung von Werkstoff- und Versagenskennwerten für Hochgeschwindigkeitsprozesse. Kennwerte für hohe Dehnraten
Scheffler, Christian; Psyk, Verena; Linnemann, Maik; Tulke, Marc; Brosius, Alexander
Presentation
2019Methodik und Algorithmus zur Ableitung von Bahnkurven für die Inkrementelle Blechumformung (IBU) mit erweiterten Umformgrenzen
Haase, Rico; Weise, Dieter; Melzer, Sebastian; Böhme, Philipp
Study
2019Methodische Flexibilitätssteigerung beim Halbhohlstanznieten
Falk, Tobias; Drossel, Welf-Guntram
Book
2019Methodology for the design of recursively axially formed rotor shafts made of two or more combined segments
Kurth, Robin; Tehel, Robert; Päßler, Thomas; Wagner, Henning; Beihofer, Dennis
Journal Article
2019Methodology for the early analysis and evaluation of the resource efficiency of process chains for manufacturing hybrid structures
Symmank, Christina; Boll, Jeannette; Rautenstrauch, Anja; Graf, Alexander; Markov, Larisa; Decker, Ricardo; Schmidt, Anja; Götze, Uwe; Awiszus, Birgit; Kräusel, Verena; Landgrebe, Dirk; Kroll, Lothar
Journal Article
2019Minderung der akustischen Wirksamkeit von Schalldämpfersystemen durch Körperschallausbreitung
Schulze, Christian; Lindner, Paul; Hübel, Jörn; Ruhnau, Mirko; Troge, Jan; Georgi, Oliver; Levermann, Dag
Conference Paper
2019Mit dem »ZIEL« zum Ziel. Die Fabrik der Zukunft ist ein »Smart-Grid«
Süße, Marian; Strehle, Hanns-Martin; Prell, Bastian; Richter, Mark
Presentation
2019Modal-space control of a linear motor-driven Gantry system
Peukert, Christoph; Pöhlmann, Patrick; Merx, Marcel; Müller, Jens; Ihlenfeldt, Steffen
Journal Article
2019Modale Regelung von Werkzeugmaschinen
Peukert, C.; Pöhlmann, P.; Ihlenfeldt, S.; Müller, J.; Merx, M.
Journal Article
2019Modeling elastic behavior of forming machine components to reduce tool manufacturing time
Tehel, Robert; Päßler, Thomas; Mihm, Matthias
Journal Article
2019Modellierung des Aufschwimmverhaltens hydrodynamischer Linearführungen bei konstanter Geschwindigkeit
Zhang, Yingying; Wittstock, Volker; Putz, Matthias
Journal Article
2019Modelling of Precise Electrochemical Machining for Nickel-based Centrifugal Impellers
Loebel, Sascha; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Petzold, Tom; Zinecker, Mike; Schubert, Andreas
Conference Paper
2019Modelling of surface formation mechanism during burnishing of aluminium
Stöckmann, Rico; Putz, Matthias
Journal Article
2019Modular Instrument for the Minimally Invasive Surgery with SMA Actuation and Control
Braun, Dennis; Weik, David; Elsner, Sophia; Werner, Michael
Conference Paper
2019Modular system to measure and control the force distribution in deep drawing processes to ensure part quality and process reliability
Drossel, Welf-Guntram; Zorn, Wolfgang; Hamm, Lucas
Journal Article
2019Modulare Rotorwellen für die Elektromobilität - Simulation und Test umformtechnisch hergestellter Segmente
Kurth, Robin; Wagner, Henning; Beihofer, Dennis; Peter, Thomas; Tehel, Robert
Journal Article
2019Möglichkeiten zur In-Prozess-Bewertung von thermischen Randzonenschädigungen beim Schleifen
Gentzen, Jens; Pierer, Alexander
Book Article
2019Multi-functional powder coating materials for material bonding in metal-plastic joints
Gedan-Smolka, Michaela; Kühnert, Ines; Scholz, Peter; Garray, Didier
Presentation
2019Multi-sensor high-frequency eddy current depth detection in carbon fiber reinforced polymers
Matvieieva, Nataliia; Schulze, Martin H.; Chen, Lili; Patsora, Iryna V.; Heuer, Henning
Conference Paper
2019Nachbildung des menschlichen Knochens mit Metall - das Testmaterial der Zukunft?
Hannemann, Christian; Uhlig, Mandy; Hohlfeld, Jörg; Oefner, Christoph; Schoenfelder, Stephan; Heyde, Christoph-E.
Conference Paper
2019Neue Entwicklungen beim mechanischen Fügen von Aluminium
Jesche, Fred; Kraus, Christian; Jäckel, Mathias; Grimm, Thomas; Grützner, Raik
Presentation
2019A new generation of production through biological transformation
Ihlenfeldt, Steffen; Hellmich, Arvid; Noack, Marian
Presentation
2019A new generation of production with cyber-physical systems - Enabling the biological transformation in manufacturing
Neugebauer, Reimund; Ihlenfeldt, Steffen; Schließmann, Ursula; Hellmich, Arvid; Noack, Marian
Journal Article
2019A New Multigrid Based Method for Characteristic Diagram Based Correction of Thermo-Elastic Deformations in Machine Tools
Naumann, Christian; Putz, Matthias
Journal Article
2019New VDI Guideline 2248
Böhm, Andrea
Conference Paper
2019A novel hybrid clamping system for sheet metals and thin walled structures
Teicher, Uwe; Pirl, Sebastian; Nestler, Andreas; Hellmich, Arvid; Ihlenfeldt, Steffen
Journal Article
2019Novel lightweight material, design and cooperation solutions for electric mobility
Schmerler, Rico
Presentation
2019Numerical and experimental investigations for hot metal gas forming of stainless steel X2CrTiNb18
Reuther, Franz; Mosel, Andre; Freytag, Peter; Lambarri, Jon; Degenkolb, Lars; Werner, M.; Winter, S.
Journal Article
2019Nutzung angepasster Belichtungsstrategien für die Herstellung filigraner Strukturen aus superelastischem NiTi-Formgedächtnismaterial
Gustmann, Tobias; Korn, Hannes; Rotsch, Christian; Koch, Peter; Stelzer, Ralph; Töppel, Thomas
Presentation
2019Nutzung punktgenauer Belichtungsstrategien für die Herstellung metallischer Metamaterialien aus NiTi-Formgedächtnismaterial
Gustmann, Tobias; Gutmann, Florian; Wenz, Franziska; Andrä, Heiko
Poster
2019Nutzung von Plattform-Geschäftsmodellen für Industrie 4.0-Lösungen
Bolev, Dimitri; Roth, Lukas; Süße, Marian
Report
2019Oberflächenfeinwalzen und Verschleißprüfung von hochfesten austenitischen nichtrostenden Stählen für die Anwendung im Extruder
Forke, Erik; Hüllmann, André; Albrecht, Mirko; Niederhofer, Philipp; Schymura, Michael; Kräusel, Verena; Gehde, Michael
Conference Paper
2019On the correlation of hammer-peened surfaces and process, material and geometry parameters
Pfeiffer, Steffen; Fiedler, Mike; Bergelt, Tim; Kolouch, Martin; Putz, Matthias; Wagner, Martin Franz-Xaver
Conference Paper
2019Online-Überwachung der Blechbearbeitung von Bipolarplatten
Müller, Jan; Praedicow, Micheal
Conference Paper
2019Optimierte Vorform- und Prozessführung für das IHU-Presshärten komplexer Geometrien
Albert, André; Paul, Alexander; Mauermann, Reinhard
Report
2019Optimization of magneto-mechanical properties to increase the efficiency of actuator elements
Böhm, Andrea; Panesso, Miguel; Pagel, Kenny; Drossel, Welf-Guntram
Conference Paper
2019Optimizing development time through hybrid commissioning of control software
Allmacher, Christoph; Schumann, Marco; Klimant, Philipp; Putz, Matthias
Journal Article
2019Overcoming Limits - Die Forging of Cast Preforms
Böhmichen, Uwe; Lehnert, Tim; Schubert, Nadine; Wagner, André; Sterzing, Andreas; Mauermann, Reinhard
Conference Paper
2019Overcoming the Challenges for a Mass Manufacturing Machine for the Assembly of PEMFC Stacks
Porstmann, Sebastian; Wannemacher, Thomas; Richter, Thilo
Journal Article
2019Parallel Computing in Automation of Decoupled flow and thermal-structural Simulation Approach
Glänzel, Janine; Naumann, Andreas; Kumar, Tharun Suresh
Preprint
2019Parameter measurement and conductive heating during press hardening by hot metal gas forming
Bach, Mirko; Degenkolb, Lars; Reuther, Franz; Psyk, Verena; Mauermann, Reinhard; Werner, Markus
Presentation
2019Parameter measurement and conductive heating during press hardening by hot metal gas forming
Bach, Mirko; Degenkolb, Lars; Reuther, Franz; Psyk, Verena; Mauermann, Reinhard; Werner, Markus
Conference Paper
2019Parameterization of Environmental Influences by Automated Characteristic Diagrams for the Decoupled Fluid and Structural-mechanical Simulations
Glänzel, Janine; Kumar, Tharun Suresh; Naumann, Christian; Putz, Matthias
Journal Article
2019Physiological in vitro sacroiliac joint motion. A study on three-dimensional posterior pelvic ring kinematics
Hammer, Niels; Scholze, Mario; Kibsgard, Thomas; Klima, Stefan; Schleifenbaum, Stefan; Seidel, Thomas; Werner, Michael; Grunert, Ronny
Journal Article
2019Planung und Entwicklung von Formgedächtnis-Aktoren mit der Richtlinie VDI 2248. Ein Überblick zu Formgedächtnislegierungen
Böhm, Andrea
Presentation
2019Post-mortem in situ stability of serum markers of cerebral damage and acute phase response
Ondruschka, B.; Woydt, L.; Bernhard, M.; Franke, H.; Kirsten, H.; Löffler, S.; Pohlers, D.; Hammer, N.; Dreßler, J.
Journal Article
2019Potential of a novel integration technology for high-strength welding of metal-FRP hybrid structures with the help of welding inserts (WI)
Lippmann, Jens; Riedel, Frank; Töberling, Gerd
Conference Paper
2019Potential of the force distribution measurement in deep drawing processes for increasing the process quality
Zorn, Wolfgang; Hamm, Lucas; Elsner, Roman; Drossel, Welf-Guntram
Journal Article
2019Potentials and challenges of additive manufacturing technologies for heat exchanger
Scheithauer, Uwe; Kordaß, Richard; Noack, Kevin; Eichenauer, Martin F.; Hartmann, Mathias; Abel, Johannes; Ganzer, Gregor; Lordick, Daniel
Book Article
2019Potenzial einer Integrationstechnologie für Metall-FVK-Hybridstrukturen mit Welding Inserts und prozessangepasster Haftvermittlersysteme
Lippmann, Jens; Anders, Susann; Schreiter, Katja
Conference Paper
2019Predictive Analysis from numerical and experimental data in press hardening
Penter, Lars; Link, Patrick; Ihlenfeldt, Steffen; Stoll, Anke; Albert, André
Conference Paper
2019Prefinished metal polymer hybrid parts
Kühnert, I.; Fischer, M.; Gedan-Smolka, M.; Scholz, P.; Garray, D.
Conference Paper
2019Printing and Laser Sintering of Ag and Cu Paste - Prospects and Challenges in Additive Manufacturing
Fichtner, Juliane; Dobeleit, Philipp; Jaretzki, Martin; Ascheri, Mary Esther; Stoll, Tobias
Poster
2019Process control in a press hardening production line with numerous process variables and quality criteria
Stoll, Anke; Pierschel, Norbert; Wenzel, Ken; Langer, Tino
Conference Paper
2019Process control in jet electrochemical machining of stainless steel through inline metrology of current density
Yahyavi Zanjani, Matin; Hackert-Oschätzchen, Matthias; Martin, Andre; Meichsner, Gunnar; Edelmann, Jan; Schubert, Andreas
Journal Article
2019Process development for self-pierce riveting with solid formable rivet of boron steel in multi-material design
Grimm, Thomas; Drossel, Welf-Guntram
Journal Article
2019Process Optimization for Flexible Self-Pierce Riveting of Multi-Material Structures
Falk, Tobias; Jäckel, Mathias
Conference Paper
2019Process Understanding of Plasma Electrolytic Polishing through Multiphysics Simulation and Inline Metrology
Danilov, Igor; Hackert-Oschätzchen, Matthias; Zinecker, Mike; Meichsner, Gunnar; Edelmann, Jan; Schubert, Andreas
Journal Article
2019Production planning for optimal mass pre-distribution for axial feed cross rolling
Schubert, Nadine; Steger, Jürgen; Gerlach, Marcel; Lorenz, Bernd
Journal Article
2019Profile cross rolling for the local hardness increase in helical components such as extruder screws
Forke, Erik; Landgrebe, Dirk
Journal Article
2019Prozessentwicklung Stanzstauchnieten
Grimm, Thomas; Kraus, Christian; Jäckel, Mathias; Jesche, Fred
Presentation
2019Prozessgestaltung des Querkeilwalzens von Aluminium-Knetlegierungen
Steger, Jürgen; Schubert, Nadine
Conference Paper
2019Pultrudierte Profile für die Anwendung von morgen
Löpitz, David
Presentation
2019Qualifizierung des Stanzstauchnietens zum Fügen von Leichtbaustrukturen
Grimm, Thomas; Drossel, Welf-Guntram
Book
2019Quantification of fat in the posterior sacroiliac joint region: fat volume is sex and age dependant
Poilliot, A.; Doyle, T.; Tomlinson, J.; Zhang, M.; Zwirner, J.; Hammer, N.
Journal Article
2019Real-time machine simulation using cutting force calculation based on a voxel material removal model
Witt, M.; Schumann, M.; Klimant, P.
Journal Article
2019Realer Nutzen aus virtuellen Modellen am Beispiel Werkzeugmaschinen - Blick in unterschiedliche Eigenschaftsbereiche
Ihlenfeldt, Steffen; Hellmich, Arvid
Presentation
2019Reproducibility of modal parameters using different excitation types
Hensel, Eric; Knöfel, Björn
Conference Paper
2019Resource Consumption Classes of Machine Tools
Putz, Matthias; Koriath, Hans-Joachim; Kuznetsov, Alexander P.
Conference Paper
2019Resource Consumption Classes of Machine Tools
Putz, Matthias; Koriath, Hans-Joachim; Kuznetsov, Alexander P.
Journal Article
2019Resource-efficient, innovative coil production for increased slot filling factor
Linnemann, Maik; Bach, Mirko; Psyk, Verena; Werner, Markus; Gerlach, Marcel; Schubert, Nadine
Conference Paper
2019Ressource-efficient, innovative coil production for increased slot filling factor
Linnemann, Maik; Bach, Mirko; Psyk, Verena; Werner, Markus; Gerlach, Marcel; Schubert, Nadine
Presentation
2019Ressourceneffiziente magnetische Formgedächtnismaterialien mit reduziertem Galliumbedarf. Schlussbericht Projekt MAREGA
Laufenberg, Markus; Pagounis, Emmanouel; Tüysüz, Arda; Breisch, Sebastian; Böhm, Andrea; Panesso Perez, Miguel Antonio; Pagel, Kenny; Brillo, Jürgen; Kargl, Florian; Behnken, Herfried
Report
2019A review of machine learning for the optimization of production processes
Weichert, D.; Link, Patrick; Stoll, Anke; Rüping, S.; Ihlenfeldt, Steffen; Wrobel, S.
Journal Article
2019Sacroiliac joint ligaments and sacroiliac pain: A case-control study on micro-and ultrastructural findings on morphologic alterations
Hammer, N.; Ondruschka, B.; Fuchs, V.
Journal Article
2019Schallbasiertes System zur Prozessüberwachung und –regelung von produktionstechnischen Fertigungsverfahren
Georgi, Oliver; Rentzsch, Hendrik
Study
2019Screening-based evidence of the impact of geometrical deviations on inner stresses on mechanical presses
Wagner, Nico; Päßler, T.
Journal Article
2019Sealing of glass with titanium by glass pressing at the softening point
Winkler, Sebastian; Edelmann, Jan; Günther, Daniel; Wieland, Sebastian; Selbmann, Franz; Baum, Mario; Schubert, Andreas
Journal Article
2019Selective laser melting of Cu-based shape memory alloys
Gustmann, Tobias; Kühn, Uta; Bolfarini, Claudemiro; Kiminami, Claudio; Gargarella, Piter; Pauly, Simon
Presentation
2019Sensor integration by additive manufacturing
Oettel, Markus
Presentation
2019Sensorintegration mit 3D-Druckverfahren. Verwertungspotenzial und Herausforderungen
Senf, Björn; Mäder, Thomas; Hartmann, Richard; Oettel, Markus
Presentation
2019»SensoTool«. Intelligente Produktionssysteme
Ettrichrätz, Martin; Gebhardt, Sylvia
Journal Article
2019Simulation der Rückfederung von Federband
Richter, Karsten; Reuther, Franz; Müller, Roland
Journal Article
2019Simulation des Rückfederungsverhaltens federharter Bänder beim Biegen
Richter, Karsten; Reuther, Franz
Book Article
2019Simulation des Rückfederungsverhaltens federharter Bänder beim Biegen
Richter, Karsten; Reuther, Franz; Müller, Roland
Presentation
2019Simulation des Rückfederungsverhaltens federharter Bänder beim Biegen
Richter, Karsten; Reuther, Franz
Report
2019Simulation of dressing process for continuous generating gear grinding
Böttger, Jonas; Kimme, Simon; Drossel, Welf-Guntram
Journal Article
2019Simulation von Crash-Strukturen in Faserverbundbauweise mit experimentell verifizierten Materialmodell
Szymanski, Felix
: Nossol, Patryk (Betreuer)
Term paper
2019A simulation-based approach to predict of the springback behavior of ultra-high strength spring strips
Richter, Karsten; Reuther, Franz; Müller, Roland
Conference Paper
2019Simulation-based investigation for heat transfer behavior of steel reinforcements in concrete machine frames and their thermal effects
Glänzel, Janine; Geist, Alexander; Ihlenfeldt, Steffen
Journal Article
2019Single point incremental forming of large sheet metal components
Schieck, Frank; Mauermann, Reinhard; Weise, Dieter; Demmler, Matthias
Conference Paper
2019Smart components by additive technologies
Dani, Ines
Conference Paper
2019Smart Machine Components - Fundamental Part of Cognitive Forming Machines
Tehel, Robert; Kurth, Robin; Bergmann, Markus
Presentation
2019Smart rollerski - radius pultrusion in application
Drebenstedt, Claudia; Knobloch, Marcus
Poster
2019Smartes Leichtgewicht auf Rollen
Knobloch, Marcus; Löpitz, David; Drebenstedt, Claudia
Journal Article
2019StaBiFü® - efficient manufacturing of structural parts
Werner, Markus
Presentation
2019Stanzstauchnieten - Numerische Nietentwicklung zur Qualifizierung des Fügeverfahrens für dünne Blechwerkstoffe
Grimm, Thomas
Internet Contribution
2019Strategien der Imagebildung von Wissenschaftsinstitutionen
Stietz, Romy
: Lamß, Martin
Master Thesis
2019Strukturdynamische Untersuchungen im höheren Frequenzbereich
Hensel, Eric; Brucke, Martin
Presentation
2019Surface modification for SMC moulding tools by laser remelting
Gärtner, Eric; Vogel, Marc; Schneider, Jörg; Edelmann, Jan
Conference Paper
2019Surface Roughness and its Prediction in High Speed Milling of Aluminum Alloys with PCD and Cemented Carbide Tools
Teicher, Uwe; Hellmich, Arvid; Ihlenfeldt, Steffen; Pirl, Sebastian; Nestler, Andreas
Journal Article
2019A Survey on Automatic Model Generation for Material Flow Simulation in Discrete Manufacturing
Reinhardt, Heiner; Weber, Marek; Putz, Matthias
Journal Article
2019Survival-time dependent increase in neuronal IL-6 and astroglial GFAP expression in fatally injured human brain tissue
Trautz, F.; Franke, H.; Bohnert, S.; Hammer, N.; Müller, W.; Stassart, R.; Tse, R.; Zwirner, J.; Dreßler, J.; Ondruschka, B.
Journal Article
2019System und Verfahren zum Informationsaustausch zwischen mindestens zwei Mensch-Roboter-Kooperationssystemen
Bdiwi, Mohamad; Rashid, Aquib
Patent
2019System zur Wandlung thermischer in elektrische Energie unter Nutzung des Seebeck-Effektes
Hannemann, Christian; Scholz, Steffen
Patent
2019A systematic review of the morphology and function of the sacrotuberous ligament
Aldabe, D.; Hammer, N.; Flack, N.A.M.S.; Woodley, S.J.
Journal Article
2019A Systematic Review of the Normal Sacroiliac Joint Anatomy and Adjacent Tissues for Pain Physicians
Poilliot, A.J.; Zwirner, J.; Doyle, T.; Hammer, N.
Journal Article
2019Tailored fiber placement for thermoplastic composites using a cost-effective process route
Scheffler, Christina; Spickenhauer, Axel; Haase, Rico; Garray, Didier
Conference Paper
2019A technical concept of a computer game for patients with Parkinson's disease - a new form of PC-based physiotherapy
Grunert, Ronny; Krause, Andre´; Feig, Silvio; Meixensberger, Jürgen; Rotsch, Christian; Drossel, Welf-Guntram; Themann, Peter; Winkler, Dirk
Journal Article
2019Technological Innovations in Metals Engineering
Conner, B.; Essel, S.; Paul, S.; Wertheim, R.; Pasang, T.; Butcher, D.P.; Zeidler, H.; Dahotre, N.; Pande, S.; Banerjee, R.; Cuesta-Lopez, S.; Babcsan, N.; Solomon, V.
Journal Article
2019Technologies for the Mechanical Joining of Aluminum Die Castings
Grimm, Thomas; Jäckel, Mathias; Falk, Tobias; Drossel, Welf-Guntram
Conference Paper
2019Technology development and tool concepts for high-temperature forming of titanium
Landgrebe, Dirk; Demmler, Matthias; Albert, Andre`; Schieck, Frank; Weber, Martin
Conference Paper
2019Tensile properties of the human iliotibial tract depend on height and weight
Zwirner, J.; Babian, C.; Ondruschka, B.; Schleifenbaum, S.; Scholze, M.; Waddell, N.J.; Hammer, N.
Journal Article
2019Testing of magnetic pulse welded joints - destructive and non-destructive methods
Psyk, Verena; Hofer, Christian; Koen, Faes; Scheffler, Christian; Scherleitner, Edgar
Conference Paper
2019Thermal errors in milling: Comparison of displacements of the machine tool, tool and workpiece
Putz, Matthias; Regel, Joachim; Wenzel, A.; Bräunig, Michael
Journal Article
2019Thermische und mechanische Charakterisierung von Kältemittelverdichtern
Scheffler, Christian; Kolouch, Martin; Dankwerth, Clemens; Oltersdorf, Thore; Schnabel, Lena
Journal Article
2019Tissue Biomechanics of the Human Head are Altered by Thiel Embalming, Restricting its Use for Biomechanical Validation
Zwirner, J.; Scholze, M.; Ondruschka, B.; Hammer, N.
Journal Article
2019Tool aspects for high temperature level gas forming
Schieck, Frank; Albert, André; Demmler, Matthias
Presentation
2019Ein Überblick über die neue VDI-Richtlinie 2248 zur Formgedächtnistechnologie
Böhm, Andrea
Presentation
2019Ultraschneller 3D-Druck
Blase, Johannes; John, Christopher; Kausch, Martin; Witt, Marcus
Journal Article
2019Universelle und robuste Schwingsysteme für die spanende Bearbeitung
Hamm, Martin
Presentation
2019Unterbau einer zur Umformung von plattenförmigen Bauteilen ausgebildeten Vorrichtung
Müller, Peter; Röllig, Sebastian
Patent
2019Untersuchung beleuchtungsabhängiger Effekte bei der Bildmessung
Riedel, Mirko; Deutsch, Jessica; Liepold, Frank; Richter, Florian; Ihlenfeldt, Steffen
Conference Paper
2019Untersuchung der mechanischen Eigenschaften von humanen Knochengeweben für die Erstellung eines künstlichen Knochenmodells
Metzner, Florian
: Neupetsch, Constanze
Master Thesis
2019Untersuchung des Aufheiz- und Abkühlverhaltens von thermoplastischen Halbzeugen zur Verarbeitung im Pressprozess
Thiele, Jan
: Schreiter, Michael
Master Thesis
2019The utility and benefit of a newly established postgraduate training course in surgical exposures for orthopedic and trauma surgery
Klima, S.; Cornwall, J.; Kieser, D.; Hammer, N.
Journal Article
2019Vector Flow Imaging of a Highly Laden Suspension in a Zinc-Air Flow Battery Model
Kupsch, Christian; Weik, David; Feierabend, Lukas; Nauber, Richard; Büttner, Lars; Czarske, Jürgen
Journal Article
2019Verfahren und Vorrichtung zur Herstellung einer elektrotechnischen Spule
Bach, Mirko; Gerlach, Marcel; Linnemann, Maik; Werner, Markus
Patent
2019Verfahren zur Erfassung und Identifikation von miteinander mit einem Fügeverfahren verbundenen Bauteilen
Riedel, Frank; Wiener, Thomas
Patent
2019Verfahrensübergreifende additive Verarbeitung des Einsatzstahls 1.2764 für Werkzeuge mit verbesserten Verschleißeigenschaften
Bittner, Florian; Thielsch, Juliane; Gustmann, Tobias; Kordaß, Richard; Kolbe, Christian; Maiwald, Tim; Polenz, Stefan
Presentation
2019Vergleich der Ansätze von numerischer und experimenteller Bestimmung der Körperschallintensität an einfachen Strukturen sowie deren messtechnische Herausforderungen
Bräunig, Jan; Hensel, Eric; Pedro, Marieke
Conference Paper
2019Vergleich zweier dynamischer Prüfmethoden zur Untersuchung der Primärstabilität von Pedikelschrauben
Metzner, Florian; Schleifenbaum, Stefan; Neupetsch, Constanze; Drossel, Welf-Guntram; Heyde, Christoph-E.
Poster
2019Vergleichende Darstellung zweier Werkzeuge zur Simulation energetischer Aspekte in der Produktion
Prell, Bastian; Strehle, Hanns-Martin; Schlegel, Andreas; Putz, Matthias
Conference Paper
2019Vom Guss- zum Schmiedeteil - eine durchgängige Simulation
Böhmichen, Uwe; Wagner, André; Mauermann, Reinhard; Jaouen, Oliver
Presentation
2019Vom Prototypen in die massenproduktionstaugliche Fertigung - neue Konzepte zur Erzeugung mikrostrukturierter Oberflächen
Hackl, Claudia; Griebel, Jan; Elsner, Christian; Eckert, Udo; Gärtner, Eric; Edelmann, Jan; Abel, Bernd
Poster
2019Vorrichtung und Verfahren zum thermischen stoffschlüssigen Verbinden von Bauteilen
Colditz, André; Puschmann, Markus
Patent
2019Vorrichtung zum Laserschweißen
Riedel, Frank
Patent
2019Vorrichtung zur Bewegung, den Transport und/oder die Positionierung von Gegenständen
Jäger, Erik; Unger, Erik
Patent
2019Water-content related alterations in macro and micro scale tendon biomechanics
Lozano, P.F.; Scholze, M.; Babian, C.; Scheidt, H.; Vielmuth, F.; Waschke, J.; Ondruschka, B.; Hammer, N.
Journal Article
2019Weiterentwicklung von Crash-Energieabsorbern in Faserverbundbauweise
Zeidler, Pascal Peter
: Nossol, Patryk (Betreuer); Saleem, Arham (Betreuer)
Thesis
2019Werkzeugbahnhof mit einem ein Nachgiebigkeitsmodul umfassenden Werkzeugwechselsystem und Nachgiebigkeitsmodul
Findeisen, Mathias; Jäger, Erik
Patent
2019Wireless sensor network for retrofitting production Systems
Lemme, Gordon; Nölscher, Kilian
Conference Paper