Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2021Adaptive design of manufacturing process sequences in case of short-term disruptions in the production process
Bergs, T.; Stauder, L.; Beckers, A.; Grünebaum, T.; Barth, S.
Journal Article
2021Agile ramp-up production as an advantage of highly iterative product development
Bergs, T.; Apelt, S.; Beckers, A.; Barth, S.
Letter to the Editor
2021Appropriate Smart Factory for SMEs: Concept, Application and Perspective
Jung, W.-K.; Kim, D.-R.; Lee, H.; Lee, T.-H.; Yang, I.; Youn, B.D.; Zontar, D.; Brockmann, M.; Brecher, C.; Ahn, S.-H.
Journal Article
2021Automated Stem Cell Production by Bio-Inspired Control
Monostori, László; Csáji, Balázs C.; Egri, Péter; Kis, Krisztián B.; Váncza, József; Ochs, Jelena; Jung, Sven; König, Niels; Pieskie, Simon; Wein, Stephan; Schmitt, Robert; Brecher, Christian
Journal Article
2021Bactericidal surfaces: An emerging 21st-century ultra-precision manufacturing and materials puzzle
Larrañaga-Altuna, M.; Zabala, A.; Llavori, I.; Pearce, O.; Nguyen, D.T.; Caro, J.; Mescheder, H.; Endrino, J.L.; Goel, G.; Ayre, W.N.; Seenivasagam, R.K.; Tripathy, D.K.; Armstrong, J.; Goel, S.
Journal Article
2021Bedarfsorientierte und effiziente IT-Sicherheitskonzepte
Heutmann, T.; Kreppein, A.; Schmitt, R.H.
Journal Article
2021Calculation of the maximum chip thickness for a radial-axial infeed in gear hobbing
Troß, N.; Brimmers, J.; Bergs, T.
Journal Article
2021Considering multiple process observables to determine material model parameters for FE-cutting simulations
Hardt, M.; Bergs, T.
Journal Article
2021Cybersecurity in Networked Production. White Paper
Kiesel, Raphael; Kies, Alexander D.; Kreppein, Alexander; Heutmann, Timo; Dering, Jan; Vollmer, Thomas; Schmitt, Robert H.
Report
2021Data-Driven Technology Management Supported by Artificial Intelligence Solutions
Schuh, Günther; Boßmeyer, Hans-Jürgen; Bräkling, André
Journal Article
2021Deep-learning-based multi-class segmentation for automated, non-invasive routine assessment of human pluripotent stem cell culture status
Piotrowski, Tobias; Rippel, Oliver; Elanzew, Andreas; Nießing, Bastian; Stucken, Sebastian; Jung, Sven; König, Niels; Haupt, Simone; Stappert, Laura; Brüstle, Oliver; Schmitt, Robert; Jonas, Stephan
Journal Article
2021Design of economically-optimized manufacturing process sequences using cross-process models
Beckers, A.; Stauder, L.; Grünebaum, T.; Barth, S.; Bergs, T.
Journal Article
2021Development of a CAM-based additive laser cladding process for adaptive manufacturing of multi-material systems for high-performance components
Kammann, Sebastian; Gipperich, Marius; Plakhotnik, Denys; Königs, Michael; Leunis, Elke; Hallet, Xavier
Report
2021Digitized assembly of complex optical systems
Tavakolian, Armin; Hoeren, Maximilian; Rojacher, Cornelia
Report
2021Experimental analysis on vibratory finishing of cemented carbides
Bergs, T.; Müller, U.; Barth, S.; Ohlert, M.
Journal Article
2021Fully Automated Cultivation of Adipose-Derived Stem Cells in the StemCellDiscovery - A Robotic Laboratory for Small-Scale, High-Throughput Cell Production Including Deep Learning-Based Confluence Estimation
Ochs, Jelena; Biermann, Ferdinand; Piotrowski, Tobias; Erkens, Frederik; Nießing, Bastian; Herbst, Laura; König, Niels; Schmitt, Robert H.
Journal Article
2021A fully coupled local and global optical-thermal model for continuous adjacent laser-assisted tape winding process of type-IV pressure vessels
Zaami, A.; Schäkel, M.; Baran, I.; Bor, T.C.; Janssen, H.; Akkerman, R.
Journal Article
2021Generation and evaluation of automation concepts of additive process chains with Laser Powder Bed Fusion (L-PBF)
Horstkotte, Rainer; Heinrich, Florian; Prümmer, Marcel; Arntz, Kristian; Bergs, Thomas
Journal Article
2021Geometry model and approach for future blisk LCA
Fricke, K.; Gierlings, S.; Ganser, P.; Venek, T.; Bergs, T.
Conference Paper
2021Im Dreischritt zur sicheren Produktion. Bedarfsorientierte und effiziente IT-Sicherheitskonzepte für KMU
Heutmann, Timo; Schmitt, Robert H.
Journal Article
2021Industrielle Produktionsanlagen modular erweitern mit 5G
Schmitt, S.; Brunk, N.; König, N.; Lange, D.; Schmitt, R.H.
Journal Article
2021Influence of the frequency of pulsating high-pressure cutting fluid jets on the resulting chip length and surface finish
Splettstoesser, A.; Schraknepper, D.; Bergs, T.
Journal Article
2021Investigation of Mechanical Loads Distribution for the Process of Generating Gear Grinding
Teixeira, P.O.; Brimmers, J.; Bergs, T.
Journal Article
2021Investigation of the chip formation during hobbing by means of an analytical approach
Bergs, T.; Brimmers, J.; Georgoussis, A.; Krömer, M.
Journal Article
2021Investigations on the Application of the Downhill-Simplex-Algorithm to the Inverse Determination of Material Model Parameters for FE-Machining Simulations
Hardt, M.; Schraknepper, D.; Bergs, T.
Journal Article
2021Life cycle assessment for milling of Ti- and Ni-based alloy aero engine components
Bergs, T.; Grünebaum, T.; Fricke, K.; Barth, S.; Ganser, P.
Journal Article
2021Machine learning-based predictive modeling of contact heat transfer
Vu, A.T.; Gulati, S.; Vogel, P.-A.; Grunwald, T.; Bergs, T.
Journal Article
2021Methodic development of laser micro structured cutting tools with microscale textures for AW7075 aluminum alloy using a Plackett–Burman screening design
Esch, Philipp; Klocke, Fritz; Bauernhansl, Thomas; Schneider, Marco
Journal Article
2021Post-lithium-ion battery cell production and its compatibility with lithium-ion cell production infrastructure
Duffner, F.; Kronemeyer, N.; Tübke, J.; Leker, J.; Winter, M.; Schmuch, R.
Review
2021Potentials of Bluetooth Low Energy Beacons for order tracing in single and small batch production
Elser, H.; Jongebloed, P.; Buschmann, D.; Ellerich, M.; Schmitt, R.H.
Journal Article
2021Potentials of Vitrified and Elastic Bonded Fine Grinding Worms in Continuous Generating Gear Grinding
Schrank, M.; Brimmers, J.; Bergs, T.
Journal Article
2021Predicting performance indicators with ANNs for AI-based online scheduling in dynamically interconnected assembly systems
Göppert, A.; Mohring, L.; Schmitt, R.H.
Journal Article
2021Reflectometry-based investigation of temperature fields during dual-beam Laser Metal Deposition
Gipperich, Marius; Peters, Christian; Riepe, Jan; Day, Robin; Bergs, Thomas
Conference Paper
2021The Relevance of Fuel Cells for Mobility Applications. Discussion Paper
Baum, Christoph; Janssen, Henning; Brecher, Christian; Schuh, Günther; Aretz, Martin; Hamm, Carolin; Horstkotte, Rainer; Kersting, Marlin; Lee, Sangwook; Masonett, Angela; Müller, Clemens; Nadicksbernd, Maximilian; Panchenko, Ulla; Schenk, Leonard; Scholz, Paul; Voebel, Toni
Report
2021Ressourcenschonende Alternative für die Fertigung von Antriebswellen
 
Journal Article
2021Sensor-Optiken nach dem Vorbild von Mottenaugen
 
Journal Article
2021Statistical testing for sufficient control chart performances during monitoring of grouped processes
Kostyszyn, K.N.; Brandstätter, T.C.; Vollmer, T.; Schmitt, R.
Journal Article
2021Systematic Change of Abrasive Size Distribution
Bergs, T.; Schüler, M.; Herrig, T.; Fernolendt, J.; Linde, M.
Conference Paper
2021Techno-Economic Analysis of Automated iPSC Production
Nießing, Bastian; Kiesel, Raphael; Herbst, Laura; Schmitt, Robert H.
Journal Article
2021A time series classification approach to non-destructive hardness testing using magnetic Barkhausen noise emission
Unterberg, M.; Stanke, J.; Trauth, D.; Bergs, T.
Journal Article
2021Tool wear in dry gear hobbing of 20MnCr5 case-hardening steel, 42CrMo4 tempered steel and EN-GJS-700-2 cast iron
Troß, N.; Brimmers, J.; Bergs, T.
Journal Article
2021Traceability ermöglicht den digitalen Zwilling. Digitalisierung in der Batteriezellfertigung
Kies, Alexander D.; Krauß, Jonathan; Baum, Christoph; Schmitt, Robert H.; Brecher, Christian
Journal Article
2021Überwacht mit Hilfe von 5G
Königs, Niels; Mohanram, Praveen; Krischke, Inka
Journal Article
2021Wettbewerbsfaktor Resilienz. Handlungsfelder für den krisensicheren Werkzeugbau
Boos, Wolfgang; Trauth, Daniel; Arntz, Kristian; Prümmer, Marcel; Niemietz, Philipp; Wilms, Marcel; Lürken, Christian; Mayer, Johannes
Study
20205G-Anwendungen für die Bildverarbeitung und Messtechnik
Schmitt, Sarah
Journal Article
20205G-basierte Sensorik zur Überwachung der Produktion - Erprobung der 5G Mobilfunktechnologie in der Produktion auf dem 5G-Industry Campus Europe
Schmitt, Sarah; Jung, Sven; König, Niels; Schmitt, Robert H.
Journal Article
2020Adaptive process monitoring for laser micro structuring of electrical steel using Optical Coherence Tomography with non-colour corrected lenses
Zechel, F.; Kunze, R.; Widmann, P.; Schmitt, R.H.
Journal Article
2020Adaptive und kontextspezifische technische Handlungsanweisungen
Lossie, Karl; Nuy, Leo; Rachner, Jonas; Schmitt, Robert H.
Journal Article
2020Additiv-Bauteile in der Fertigung - eine ganzheitliche Betrachtung
Wollbrink, M.; Hähnel, S.
Journal Article
2020Additive Fertigung von Zerspanwerkzeugen
Lakner, T.; Koch, M.; Bergs, T.; Schraknepper, D.
Journal Article
2020Additive Prozesskette zur Herstellung von thermoplastischen Faserverbund-Hybridbauteile
Janssen, Henning
Dissertation
2020Always Beta - DevOps für cyber-physische Produkte
Schuh, Günther; Ays, Johanna; Becker, Annika; Britz, Alexander; Dölle, Christian; Hegener, Guido; Hermann, Ulrich; Wlecke, Shari
Book Article
2020Analytics in der Produktion
Brecher, Christian; Biernat, Benedikt; Fey, Marcel; Ochel, Janis; Wiesch, Marian
Book Article
2020Application cases of biological transformation in manufacturing technology
Bergs, T.; Schwaneberg, U.; Barth, S.; Hermann, L.; Grunwald, T.; Mayer, S.; Biermann, F.; Sözer, N.
Journal Article
2020Architektur einer vernetzten, adaptiven Produktion
Schmitt, Robert H.; König, Niels; Jung, Sven; Peterek, Martin
Book Article
2020Assessing the application based utility potential of new technologies
Schuh, I.G.; Scholz, P.; Ando, Y.M.-S.
Conference Paper
2020Automated machine learning for predictive quality in production
Krauß, Jonathan; Machado Pacheco, Bruno; Zang, Hanno Maximilian; Schmitt, Robert Heinrich
Journal Article
2020Automated PM-fiber array assembly with high-precision four DOF alignment
Berger, M.; Alippi, A.; Haag, S.; Hoeren, M.; Müller, T.; Zontar, D.; Brecher, C.
Conference Paper
2020Automated sensor-guided packaging of diamond tools
Ehret, S.; Saunders, G.D.; Hillmer, N.; Müller, T.; Hoeren, M.; Zontar, D.; Brecher, C.
Conference Paper
2020Automation, Monitoring, and Standardization of Cell Product Manufacturing
Doulgkeroglou, M.-N.; Nubila, A. di; Niessing, B.; König, N.; Schmitt, R.H.; Damen, J.; Szilvassy, S.J.; Chang, W.; Csontos, L.; Louis, S.; Kugelmeier, P.; Ronfard, V.; Bayon, Y.; Zeugolis, D.I.
Journal Article
2020Best of Benchmark - Automatisierung und Maschinenverkettung
Prümmer, Marcel; Lürken, Christian
Book Article
2020Best of Benchmark - Grenzfallbetrachtung zwischen Fräsen und Senkerosion
Wilms, Marcel; Heß, Raphael; Schneider, Sebastian
Book Article
2020Bio-inspired control of automated stem cell production
Egri, P.; Csáji, B.C.; Kis, K.B.; Monostori, L.; Váncza, J.; Ochs, J.; Jung, S.; König, N.; Schmitt, R.; Brecher, C.; Pieske, S.; Wein, S.
Journal Article
2020The biological transformation of industrial manufacturing - Technologies, status and scenarios for a sustainable future of the German manufacturing industry
Miehe, Robert; Bauernhansl, Thomas; Beckett, Marc; Brecher, Christian; Demmer, Axel; Drossel, Welf-Guntram; Elfert, Patrick; Full, Johannes; Hellmich, Arvid; Hinxlage, Julian; Horbelt, Jessica; Jutz, G.; Krieg, S.; Maufroy, Christophe; Noack, Marian; Sauer, Alexander; Schließmann, Ursula; Scholz, Paul; Schwarz, Oliver; Ten Hompel, Michael; Wrycza, Philipp; Wolperdinger, Markus
Journal Article
2020Biologische Transformation in der Produktion
Brecher, Christian; Broos, Alexander; Essig, Bernd; Hofmann, Boris; Mallmann, Guilherme; Muecke, Thomas; Queins, Marcus; Streichfuss, Martin; Tavakolian, Armin; Zontar, Daniel
Book Article
2020CaliBend: A flexible, cost-effective laser module for thermal-assisted bending of high-strength steels
Carbonell-Sanromà, E.; Schmidt, F.; Panick, D.; Montiel-Ponsoda, J.J.; Eckert, M.; Melchers, C.
Conference Paper
2020Case Study for the Integrated Development of a Modular System for Vehicle Superstructures of Battery Electric Light Commercial Vehicles
Schuh, Günther; Dölle, Christian; Kreutzer, Ramon; Patzwald, Marc; Koch, Jan
Conference Paper
2020Case study on technological applications for production planning and control in the context of industry 4.0
Schuh, Günther; Scholz, Patrick
Conference Paper
2020Clamping and substrate plate system for continuous additive build-up and post-processing of metal parts
Wollbrink, Moritz; Maslo, Semir; Zimmer, Daniel; Abbas, Karim; Arntz, Kristian; Bergs, Thomas
Journal Article
2020Comparison of 5G enabled control loops for production
Kehl, P.; Lange, D.D.; Konstantin Maurer, F.; Nemeth, G.; Overbeck, D.; Jung, S.; König, N.; Schmitt, P.R.H.
Conference Paper
2020A cost-effective alternative for chessboard pattern to calibrate industrial infrared cameras used in defect measurement with active lock-in thermography
Fonseca de Oliveira, Bernardo Cassimiro; Seibert, Artur Antonio; Winands, Kai; Sá Brant, Marina de; Bortoli, Tiago Junior de; Baldo, Christian Raffaelo; Gonçalves, Albertazzi Júnior
Conference Paper
2020Cybersecurity in der vernetzten Produktion
Kiesel, Raphael; Heutmann, Timo; Dering, Jan; Kies, Alexander; Vollmer, Thomas; Schmitt, Robert H.
Report
2020Design model for a value chain-oriented quality management in global tooling
Bergs, Thomas; Prümmer, Marcel; Lürken, Christian; Arntz, Kristian
Journal Article
2020Development of a bioreactor system for pre-endothelialized cardiac patch generation with enhanced viscoelastic properties by combined collagen I compression and stromal cell culture
Krziminski, Carolin; Kammann, Sebastian; Hansmann, Jan; Edenhofer, Frank; Dandekar, Gudrun; Walles, Heike; Leistner, Marcus
Journal Article
2020Development of Wire- and Powder-based Laser Metal Deposition Process for Locally Modified Mechanical Properties of X37CrMoV5-1 Tool Steel
Teli, Mahesh
Dissertation
2020Digital image processing with deep learning for automated cutting tool wear detection
Bergs, Thomas; Holst, Carsten; Gupta, Pranjul; Augspurger, Thorsten
Journal Article
2020Der Digitale Zwilling über den Produktlebenszyklus. Das Konzept des Digitalen Zwillings verstehen und gewinnbringend einsetzen
Massonet, Angela; Kiesel, Raphael; Schmitt, Robert H.
Journal Article
2020Directly printed low-cost nanoparticle sensor for vibration measurement during milling process
Min, S.-H.; Lee, T.H.; Lee, G.-Y.; Zontar, D.; Brecher, C.; Ahn, S.-H.
Journal Article
2020Disruptionsorientierter Spezifikationsprozess technischer Systeme
Wetterney, Tim
Dissertation
2020Durchgängige Bearbeitung von 3D-gedruckten Metallteilen
Wollbrink, Moritz; Maslo, Semir; Arntz, Kristian; Bergs, Thomas
Journal Article
2020E-Schrott ökonomisch aufbereiten
Kiesel, Raphael; Kies, Alexander; Schmitt, Robert H.
Journal Article
2020Elektrochemisches Schneiden mit einer Drahtelektrode
Herrig, Tim
: Bergs, T.; Klocke, F.
Dissertation
2020Evaluation of Industry 4.0 Data formats for Digital Twin of Optical Components
Schmetz, Arno; Lee, Tae Hun; Hoeren, Maximilian; Berger, Marvin; Ehret, Susanne; Zontar, Daniel; Min, Soo-Hong; Ahn, Sung-Hoon; Brecher, Christian
Journal Article
2020Experimental investigation of specific cutting forces and estimation of the heat partitioning under increasing tool wear in machining nickel-based super alloy IN 718
Augspurger, T.; Schraknepper, D.; Bergs, T.
Journal Article
2020Experimental investigations on the influence of temperature for Laser Metal Deposition with lateral Inconel 718 wire feeding
Bergs, T.; Kammann, S.; Fraga, G.; Riepe, J.; Arntz, K.
Journal Article
2020FactDAG: Formalizing Data Interoperability in an Internet of Production
Gleim, L.; Pennekamp, J.; Liebenberg, M.; Buchsbaum, M.; Niemietz, P.; Knape, S.; Epple, A.; Storms, S.; Trauth, D.; Bergs, T.; Brecher, C.; Decker, S.; Lakemeyer, G.; Wehrle, K.
Journal Article
2020From Cell to Battery System in BEVs: Analysis of System Packing Efficiency and Cell Types
Löbberding, H.; Wessel, S.; Offermanns, C.; Kehrer, M.; Rother, J.; Heimes, H.; Kampker, A.
Journal Article
2020From Cord to Eye: Wharton Jelly-Derived Stem Cells Differentiate Into Corneal Endothelial-Like Cells
Feiertag, E.; Maassen, J.; Mueller, A.; Harnisch, E.; Skazik-Voogt, C.; Engelmann, K.; Schrage, N.; Gutermuth, A.
Journal Article
2020Funktionale Rückverfolgbarkeit von Prozessketten. Ein daten- und modellbasierter Ansatz
Bergs, Thomas; Brimmers, Jens; Kappmeyer, Gregor; Löpenhaus, Christoph; Scheffler, Florian; Thies, Ulrich; Troß, Nico; Wemhöner, Jens; Yakaria, hermann
Book Article
2020Future Assembly with Distributed Sensor Services
Schmitt, Robert H.; Eickhorst, Dirk; Flöter, Felix; Freeman, Philip L.; Hanke, Norbert; Hüttemann, Guido; Korte, Michael; Montavon, Benjamin; Prefi, Thomas; Sachs, Joachim; Struijk, Bob
Book Article
2020Future Energy Storage Systems for Mobility Applications. Discussion Paper
Baum, Christoph; Janssen, Henning; Brecher, Christian; Schuh, Günther; Hamm, Carolin; Horstkotte, Rainer; Lee, Sangwook; Massonet, Angela; Müller, Clemens; Scholz, Paul; Voebel, Toni
Study
2020Gestaltung typenbasierter Transferprozesse von Innovationen aus firmeninternen Inkubatoren
Vogt, Florian
: Schuh, G.; Bergs, T.
Dissertation
2020High precision automated tab assembly with micro optics for optimized high-power diode laser collimation
Forrer, M.; Strub, H.; Honig, T.; Koller, N.; Kunz, A.; Moser, H.; Brecher, C.; Hoeren, M.; Zontar, D.
Conference Paper
2020Holistic Automation - Wertschöpfungspotentiale einer integrierten durchgängigen Vernetzung
Brecher, Christian; Buchsbaum, Melanie; Blanke, Philipp; Hoffmann, Nicolai; Storms, Simon; Schilling, Katrin
Book Article
2020Identification of Indicators for the Assessment of Technological Risks within Technology Selection
Schuh, Günther; Scholz, Patrick; Seichter, Stefan
Conference Paper
2020Improving dynamic process stability in milling of thin-walled workpieces by optimization of spindle speed based on a linear parameter-varying model
Maslo, S.; Menezes, B.; Kienast, P.; Ganser, P.; Bergs, T.
Journal Article
2020In vitro study on the hemocompatibility of plasma electrolytic oxidation coatings on titanium substrates
Klein, M.; Kuhn, Y.; Woelke, E.; Linde, T.; Ptock, C.; Kopp, A.; Bletek, T.; Schmitz-Rode, T.; Steinseifer, U.; Arens, J.; Clauser, J.C.
Journal Article
2020In-process tool wear measurement system based on image analysis for CNC drilling machines
Lins, R.G.; Guerreiro, B.; Marques De Araujo, P.R.; Schmitt, R.
Journal Article
2020Individuelle Prozessketten im Werkzeugbau durch daten- und modellbasierte Prognosen
Bergs, Thomas; Arntz, Kristian; Prümmer, Marcel; Wilms, Marcel
Book Article
2020Integration von Lieferanten in agile Entwicklungsprozesse technischer Systeme
Schröder, Stephan
Dissertation
2020Internet of Production - Turning Data into Value
: Bergs, Thomas; Brecher, Christian; Schmitt, Robert H.; Schuh, Günther
Report
2020Interoperabilität als Erfolgsfaktor für die vernetzte, adaptive Produktion
Kiesel, Raphael; Pothen, Mario; Arntz, Kristian; Bergs, Thomas; Schmitt, Robert H.
Journal Article
2020Investigation of waterjet phases on material removal characteristics
Bergs, T.; Schüler, M.; Dadgar, M.; Herrig, T.; Klink, A.
Journal Article
2020Kennzahlenbasiertes Bewertungssystem der Leistungsfähigkeit verketteter Fertigungssysteme in der mechanischen Fertigung des Werkzeugbaus
Prümmer, Marcel
Dissertation
2020Kostengünstige Produktionstechnologie für nachhaltige Faserverbundhalbzeuge
Janssen, Henning; Schulz, Malena; Helden, Jonathan von; Schwane, Martin
Journal Article
2020Laserstrahl-Fügevorbehandlung von CFK-Bauteilen in Formwerkzeugen von Spritzgießanlagen
Schares, Richard
Dissertation
2020Lebensdauerverlängerung von Eisenbahnrädern durch Laserauftragschweißen mit Draht
Shamshoom, Jeries; Gipperich, Marius; Huberty, Benoît; Schindler, Christian; Bergs, Thomas
Journal Article
2020Looking 4.0-ward: Wie das Internet of Production die Beschäftigungsfähigkeit in der Zukunft der Arbeit beeinflusst
Metzmacher, Amelie I.; Hellebrandt, Thomas; Heine, Ina; Bergholz, Markus; Döbbeler, Benjamin; Hatfield, Sarah; Kieper, Christoph; Plutz, Martin; Varandani, Rawina; Schmitt, Robert H.
Book Article
2020Meeting the requirements of industrial production with a versatile multi-sensor platform based on 5G communication
Schmitt, S.S.; Mohanram, P.; Padovani, R.; König, N.; Jung, S.; Schmitt, R.H.
Conference Paper
2020Methodology Concept for the Determination of the Idea-specific Requirement Space for the Execution of Radical Innovations
Schuh, G.; Zeller, P.
Conference Paper
2020Methodology for the determination of the logic of innovation ideas for technical systems
Schuh, G.; Schwarberg, T.; Scholz, P.
Conference Paper
2020Mit dem Digitalen Zwilling Prozessgrenzen überwinden
Bergs, Thomas; Gierlings, Sascha; Augspurger, Thorsten
Book Article
2020Modeling of thermo-viscoelastic material behavior of glass over a wide temperature range in glass compression molding
Vu, Anh Tuan; Vu, Anh Ngoc; Grunwald, Tim; Bergs, Thomas
Journal Article
2020Monetarisierung von Fertigungsdaten
Trauth, Daniel; Bergs, Thomas; Gülpen, Christian; Maaß, Wolfgang; Mayer, Johannes; Musa, Heiko; Niemietz, Philipp; Rohnfelder, Andreas; Schaltegger, Markus; Seutter, Sebastian; Starke, Joachim; Szych, Elmar; Unterberg, Martin
Book Article
2020Neue Geschäftsmodelle für Werkzeugmaschinen
Brecher, Christian; Neus, Stephan; Rettich, Thorsten; Steinert, Alexander; Wiesch, Marian
Book Article
2020A new global kinematic-optical-thermal process model for laser-assisted tape winding with an application to helical-wound pressure vessel
Amin Hosseini, S.M.; Schäkel, Martin; Baran, Ismet; Janssen, Henning; Drongelen, Martin van; Akkerman, Remko
Journal Article
2020Non-uniform crystallinity and temperature distribution during adjacent laser-assisted tape winding process of carbon/PA12 pipes
Amin Hosseini, S.M.; Schäkel, Martin; Baran, Ismet; Janssen, Henning; Drongelen, Martin van; Akkerman, Remko
Journal Article
2020Numerical and experimental determinations of contact heat transfer coefficients in nonisothermal glass molding
Vu, A.T.; Helmig, T.; Vu, A.N.; Frekers, Y.; Grunwald, T.; Kneer, R.; Bergs, T.
Journal Article
2020OCT measurement of aspheric polymer lenses for adaptive assembly of micro optical imaging objectives
Riediger, M.; Berger, M.; Hoeren, M.; König, N.; Zontar, D.; Brecher, C.; Schmitt, R.
Conference Paper
2020Offline development of active alignment based on empirical virtual environments
Zontar, D.; Tavakolian, A.; Hoeren, M.; Brecher, C.
Conference Paper
2020Optische Kohärenztomographie für die Quantifizierung funktioneller und morphologischer Eigenschaften von humanem Knorpelgewebe
Brill, Nicolai-André
: Schmitt, R.; Loosen, P.
Dissertation
2020Optische Kohärenztomographie für Laserdurchstrahlschweißprozesse bei Kunststoffen
Ackermann, Philippe
: Schmitt, R.; Schmidt, M.
Dissertation
2020Performance comparison between model-based and machine learning approaches for the automated active alignment of FAC-lenses
Hoeren, M.; Zontar, D.; Tavakolian, A.; Berger, M.; Ehret, S.; Mussagaliyev, T.; Brecher, C.
Conference Paper
2020Piezobasierte Werkzeugtechnologie zur replikativen Herstellung abbildender Mikrooptiken aus Kunststoff
Meiers, Bernd
Dissertation
2020Precision Glass Molding of infrared optics with anti-reflective microstructures
Rojacher, Cornelia; Vu, Anh Tuan; Grunwald, Tim; Bergs, Thomas
Conference Paper
2020Predictive Quality - Data Analytics in produzierenden Unternehmen
Schmitt, Robert H.; Kurzhals, Reiner; Ellerich, Max; Nilgen, Guido; Schlegel, Peter; Dietrich, Edgar; Krauß, Jonathan; Latz, Armin; Gregori, Johann; Miller, Norberg
Book Article
2020Preparation of symmetrical and asymmetrical cutting edges on solid cutting tools using brushing tools with filament-integrated diamond grits
Bergs, T.; Schneider, S.A.M.; Amara, M.; Ganser, P.
Journal Article
2020Die Produktion digitalisieren. Mit 5G und smarter Sensorik
Schmitt, Sarah; Jung, Sven; Lefteroff, Maike
Report
2020Produktionsprozesse digitalisieren. Mit 5G und smarter Sensorik
Schmitt, Sarah; Jung, Sven; Lefteroff, Maike
Journal Article
2020PtIr protective coating system for precision glass molding tools
Friedrichs, Marcel; Peng, Zirong; Grunwald, Tim; Rohwerder, Michael; Gault, Baptiste; Bergs, Thomas
Journal Article
2020Pulsed Laser Influence on Temperature Distribution during Dual Beam Laser Metal Deposition
Gipperich, Marius; Riepe, Jan; Arntz, Kristian; Bergs, Thoms
Journal Article
2020Quantification of economic potential of 5G for latency critical applications in production
Kiesel, R.; Roessel, J. van; Schmitt, R.H.
Journal Article
2020Quantifying disturbance risks on the process time for a robust, synchronized individual production
Heutmann, T.; Tils, A.W.; Schmitt, R.H.
Journal Article
2020Requirements for economic analysis of 5G technology implementation in smart factories from end-user perspective
Kiesel, R.; Schmitt, R.H.
Conference Paper
2020The StemCellFactory: A Modular System Integration for Automated Generation and Expansion of Human Induced Pluripotent Stem Cells
Elanzew, Andreas; Nießing, Bastian; Langendoerfer, Daniel; Rippel, Oliver; Piotrowski, Tobias; Schenk, Friedrich; Kulik, Michael; Peitz, Michael; Breitkreuz, Yannik; Jung, Sven; Wanek, Paul; Stappert, Laura; Schmitt, Robert H.; Haupt, Simone; Zenke, Martin; König, Niels; Brüstle, Oliver
Journal Article
2020Structured Data Preparation Pipeline for Machine Learning-Applications in Production
Frye, Maik; Schmitt, Robert Heinrich
Conference Paper
2020Study on the creation of fine periodic structure on V-shaped groove with short-pulsed laser
Takase, R.; Kodama, S.; Shimada, K.; Mescheder, H.; Winands, K.; Riepe, J.; Arntz, K.; Mizutani, M.; Kuriyagawa, T.
Journal Article
2020Subskriptionsmodelle im Maschinen- und Anlagenbau
Schuh, Günther; Boshof, Julian; Dölle, Christian; Kelzenberg, Christoph; Tittel, Jonas
Book Article
2020Tailored melt pool shape and temperature distribution by a dual laser beam LMD-w process
Gipperich, Marius; Riepe, Jan; Day, Robin; Bergs, Thomas
Presentation
2020Tailored melt pool shape by dual laser beam LMD-w process
Gipperich, Marius; Riepe, Jan; Day, Robin; Bergs, Thomas
Presentation
2020Technical homes for human cells
Leyens, Christoph; Klotzbach, Udo; Sonntag, Frank; Wolperdinger, Markus; Loskill, Peter; Bauernhansl, Thomas; Traube, Andreas; Brecher, Christian; Schmitt, Robert; König, Nils
Book Article
2020Temperature variation during continuous laser-assisted adjacent hoop winding of type-IV pressure vessels: An experimental analysis
Zaami, Amin; Schäkel, Martin; Baran, Ismet; Bor, Ton C.; Janssen, Henning; Akkerman, Remko
Journal Article
2020Thermo-viscoelastic modeling of nonequilibrium material behavior of glass in nonisothermal glass molding
Vu, A.T.; Grunwald, T.; Bergs, T.
Journal Article
2020Tooling in Austria
Boos, Wolfgang; Kelzenberg, Christoph; Prümmer, Marcel; Helbig, Jens; Frey, Christoph; Lürken, Christian; Donath, Steffen
Journal Article
2020Tooling in Austria 2020
Boos, Wolfgang; Kelzenberg, Christoph; Boshof, Julian; Prümmer, Marcel; Ebbecke, Christoph; Frey, Christoph; Lürken, Christian
Study
2020Tooling in Germany 2020
Boos, Wolfgang; Kelzenberg, Christoph; Prümmer, Marcel; Goertz, David; Boshof, Julian; Horstkotte, Rainer; Ochel, Tim; Lürken, Christian
Study
2020Transferring Innovation from Corporate Incubators to its Parent Company. Derivation of Requirements for the Interfaces
Schuh, Günther; Vogt, Florian; Künstner, Maximilian
Journal Article
2020Transparency-driven vertical data connection of production systems for resources monitoring in manufacturing
Vollmer, Thomas
Dissertation
2020Tribological Analysis of Contacts Between Glass and Tungsten Carbide Near the Glass Transition Temperature
Chizhik, Petr; Friedrichs, Marcel; Dietzel, Dirk; Schirmeisen, André
Journal Article
2020Untersuchungen zum diodenlaserbasierten in-situ Tapelegen als Produktionstechnologie für einen großserienfähigen hybriden Leichtbau
Peters, Tido
Dissertation
2020Value Capture - Datengetriebene Geschäftsmodelle erfolgreich in produzierenden Unternehmen implementieren
Schuh, Günther; Breit, Stefan; Echterfeld, Julian; Graberg, Tim; Kreutzer, Ramon; Manz, Stephan; Michaelis, Marc; Patzwald, Marc; Pieper, Thorsten; Schön, Nico; Volm, Matthias
Book Article
2020Verfahren, Werkzeugmodul und System zur Umformung flacher Werkstücke
Vogel, Paul-Alexander; Kleber, Benjamin; Meiners, Constantin; Töne, Raphael
Patent
2020Verschleiß der Umformwerkzeuge beim Präzisionsblankpressen von Quarzglas
Dukwen, Julia
Dissertation
2020Vibration-Assisted Face Grinding of Mould Steel
Hähnel, S.; Grunwald, T.; Bergs, T.; Pini, F.; Leali, F.
Conference Paper
2020Worldwide Lab - Garantierte Produktivitätssteigerung durch Lernen im Netzwerk
Schuh, Günther; Burggräf, Peter; Gottschalk, Sebastian; Gützlaff, Andreas; Dannapfel, Matthias; Thomas, Katharina; Ebade Esfahani, Matthias; Geukes, Corinna; Welsing, Martin; Klein, Andreas; Tschöpe, Sebastian; Henrichs, Marco; Weber, Wolfgang; Holtbrügge, Johannes; Benninghaus, Christoph; Feike, Sebastian; Mairl, Paul; Hülsmann, Nikolas
Book Article
2020Zielführend auswählen und einsetzen - Messtechnik im Werkzeugbau
Wilms, Marcel; Piotrowski, Tobias
Book Article
20195G Networked Aerospace Production
Becker, Paul; König, Niels; Gierlings, Sascha; Venek, Tommy; Bergs, Thomas; Schmitt, Robert
Journal Article
2019Adaptive scheduling through machine learning-based process parameter prediction
Frye, Maik; Gyulai, David; Bergmann, Julia; Schmitt, Robert H.
Journal Article
2019Adaptive tape placement process control at geometrically changing substrates
Brecher, C.; Emonts, M.; Striet, P.; Voell, A.; Stollenwerk, J.; Janssen, H.
Journal Article
2019Adaptive, connected production of hybrid thermoplastic prototypes
Schulz, M.; Janssen, H.; Brecher, C.
Journal Article
2019Adopting automation for the manufacture of cell products - considerations and best practices
Ochs, Jelena
Blog Post
2019Advanced production of thermoplastic composite pipes
Schäkel, Martin; Peters, Tido; Janssen, Henning; Brecher, Christian
Journal Article
2019Agile Invention: Zehn Erfolgsthesen
Schuh, Günther; Kreutzer, Ramon; Vogt, Florian; Schwarberg, Thomas
Journal Article
2019Agile Invention: Zehn Erfolgsthesen. Wie agile Arbeitsweisen erfolgreich in die frühen Phasen des Innovationsprozesses integriert werden
Schuh, Günther; Kreutzer, Ramon; Vogt, Florian; Schwarberg, Thomas
Journal Article
2019Automated and Predictive Risk Assessment in Modern Manufacturing Based on Machine Learning
Müller, Tobias; Kiesel, Raphael; Schmitt, Robert
Conference Paper
2019Automated sprue removal from injection moulded micro-optics with ultrasonic cutting
Berger, Marvin; Hoeren, Maximilian; Sauer, Sebastian; Müller, Tobias; Zontar, Daniel; Brecher, Christian
Conference Paper
2019Automation in cell and gene therapy manufacturing: From past to future
Moutsantsou, Panagiota; Ochs, Jelena; Schmitt, Robert; Hewitt, Christopher; Hanga, Maria Petronela
Journal Article
2019BabyLux device: A diffuse optical system integrating diffuse correlation spectroscopy and time-resolved near-infrared spectroscopy for the neuromonitoring of the premature newborn brain
Giovannella, M.; Contini, D.; Pagliazzi, M.; Pifferi, A.; Spinelli, L.; Erdmann, R.; Donat, R.; Rocchetti, I.; Rehberger, M.; König, N.; Schmitt, R.; Torricelli, A.; Durduran, T.; Weigel, U.M.
Journal Article
2019Biointelligenz. Eine neue Perspektive für nachhaltige industrielle Wertschöpfung
Beckett, Marc; Demmer, Axel; Elfert, Patrik; Full, Johannes; Hellmich, Arvid; Hien, Katharina; Hinxlage, Julian; Horbelt, Jessica; Jutz, Günther; Krieg, Sabine; Maufroy, Christophe; Miehe, Robert; Noack, Marian; Sauer, Alexander; Schließmann, Ursula; Scholz, Patrick; Schwarz, Oliver; Wrycza, Philipp
: Bauernhansl, Thomas (Hrsg.); Brecher, Christian (Hrsg.); Drossel, Welf-Guntram (Hrsg.); Gumbsch, Peter (Hrsg.); Ten Hompel, Michael (Hrsg.); Wolperdinger, Markus (Hrsg.)
Study
2019The Biological Transformation of Industrial Manufacturing - Future Fields of Action in Bioinspired and Bio-based Production Technologies and Organization
Miehe, Robert; Full, Johannes; Scholz, Patrick; Demmer, Axel; Bauernhansl, Thomas; Sauer, A.; Schuh, Günther
Journal Article
2019Bionisch funktionalisierte Oberflächen durch laserbasierte Nachbildung der Schuppenstruktur feuchtigkeitserntender Echsen "BioLas.exe"
Comanns, Philipp; Winands, Kai; Pothen, Mario; Mescheder, Holger
Report
2019Eine Branche im Umbruch - Den technologischen Wandel in der Automobilindustrie gestalten
Schuh, Günther; Zeller, Paul; Scholz, Paul; Krebs, Leonie; Studerus, Bastian
Report
2019Certification of AI-Supported Production Processes
Brandstätter, Tobias Claus; Krauß, Jonathan; Schmitt, Robert H.
Conference Paper
2019A cloud-to-edge architecture for predictive analytics
Bowden, David; Marguglio, Angelo; Morabito, Lucrezia; Napione, Chiara; Panicucci, Simone; Nikolakis, Nikolaos; Makris, Sotiris; Coppo, Guido; Andolina, Salvatore; Macii, Alberto; Macii, Enrico; O'Mahony, Niamh; Becker, Paul; Jung, Sven
Conference Paper
2019Configuration of corporate incubators
Schuh, Günther; Lau, Felix; Vogt, Florian; Zimmermann, Richard
Report
2019Context-Specific Influencing Factors within a Transfer of Innovation from Corporate Incubators
Schuh, Günther; Vogt, Florian; Maurer, Dennis
Journal Article
2019Cybersecurity in der vernetzten Produktion. Studie zu IT-Sicherheit in produzierenden Unternehmen
Kiesel, Raphael; Dering, Jan; Schmitt, Robert H.
Journal Article
2019Descemet's Membrane Biomimetic Microtopography Differentiates Human Mesenchymal Stem Cells Into Corneal Endothelial-Like Cells
Gutermuth, A.; Maassen, J.; Harnisch, E.; Kuhlen, D.; Sauer-Budge, A.; Skazik-Voogt, C.; Engelmann, K.
Journal Article
2019Development of a decision logic for the selection of a flexible robotic system for the automated manufacturing in tooling
Wilms, Marcel; Bergs, Thomas; Arntz, Kristian; Johannsen, Lars; Strassburg, Simon
Journal Article
2019Development of a substrate unit for LPBF to increase automatization in manufacturing process chains
Maslo, Semir; Wollbrink, Moritz; Arntz, Kristian; Degen, Florian; Zimmer, Daniel
Conference Paper
2019Digital assistance during manual FRP manufacturing
Kostyszyn, Kevin; Schäkel, Martin; Grunert, Dennis; Peters, Tido; Schmitt, Robert
Journal Article
2019A Digital Shadow for the Infrared-based Tape Laying Process of Tailored Blanks out of Thermoplastic Unidirectional Tape
Schulz, Malena; Janssen, Henning; Brecher, Christian
Journal Article
2019Einsatz von Drahterosion im Werkzeugbau
Olivier, Marcel; Klink, Andreas; Prümmer, Marcel
Book Article
2019Erfolgreich digitale Fräsprozessketten umsetzen im Werkzeugbau
Boos, Wolfgang; Arntz, Kristian; Degen, Florian; Wollbrink, Moritz; Gerretz, Vincent; Lee, Tae Hun; Pothen, Mario; Venek, Tommy; Landwehr, Markus; Maurer, Felix Konstantin; Henrichs, Oliver; Lowis, Steffen
Study
2019Evaluation of mold materials for precision glass molding
Friedrichs, Marcel; Grunwald, Tim; Bergs, Thomas
Conference Paper
2019Experimental investigation of contact heat transfer coefficients in nonisothermal glass molding by infrared thermography
Vu, A.T.; Vu, A.N.; Liu, G.; Grunwald, T.; Dambon, O.; Klocke, F.; Bergs, T.
Journal Article
2019A Fog Computing Approach for Predictive Maintenance
Cerquitelli, T.; Bowden, D.; Marguglio, A.; Morabito, L.; Napione, C.; Panicucci, S.; Nikolakis, N.; Makris, S.; Coppo, G.; Andolina, S.; Macii, A.; Macii, E.; O'Mahony, N.; Becker, P.; Jung, S.
Conference Paper
2019Frei verkettete Montagesysteme ­- Auftragsplanung und Informationsbereitstellung für die neue Montageorganisation
Grunert, Dennis; Lettmann, Pascal; Löffler, Paolo; Hüttemann, Guido; Schmitt, Robert
Journal Article
2019Die frühen Phasen des Innovationsprozesses erfolgreich gestalten
Schuh, Günther; Kreutzer, Ramon; Vogt, Florian; Schwarberg, Thomas; Ehl, Thomas; Weiss, Michael
Journal Article
2019Die frühen Phasen des Innovationsprozesses erfolgreich gestalten. Erfolgsbeispiele zum Einsatz agiler Entwickungsmethoden. DEUTZ AG und KION GROUP AG (Teil 4)
Schuh, Günther; Kreutzer, Ramon; Vogt, Florian; Schwarberg, Thomas; Halfen, Michael; Janke, Astrid
Journal Article
2019Gestaltung des Technologieeinkaufs für Start-ups und mittelständische Unternehmen
Kreimeier, Matthias
Dissertation
2019Hybrid modeling of thermo-elastic behavior of a three-axis machining center using integral deformation sensors
Brecher, Christian; Lee, Tae Hun; Tzanetos, Filippos; Zontar, Daniel
Journal Article
2019A hybrid simulation tool to improve the energy efficiency in production environment
Zhou, Beiyan; Frye, Maik; Sander, C.; Schmitt, Robert H.
Conference Paper
2019Impact of the Oil Temperature on the Frictional Behavior of Laser-Structured Surfaces
Janssen, A.; Dadgar, M.; Wietheger, W.
Journal Article
2019In-Line, Real-Time Laser Process Monitoring Using Low-Coherence Interferometry
Riedel, Christoph A.; Ackermann, Philippe; Kunze, Rouwen E.; Schmitt, Robert H.
Conference Paper
2019Increasing resource efficiency with an engineering decision support system for comparison of product design variants
Buchert, Tom; Ko, Nathanael; Graf, Roberta; Vollmer, Thomas; Alkhayat, Moritz; Brandenburg, Elisabeth; Stark, Rainer; Klocke, Fritz; Leistner, Philip; Schleifenbaum, Johannes Henrich
Journal Article
2019Individualisierte Fertigung von faserverstärkten Hybridbauteilen
Hopmann, Christian; Ophüls, Max; Schulz, Malena; Janssen, Henning
Journal Article
2019Industrie 4.0 in praxisnaher Anwendung - Vom Retrofit über Datenspeicherung zum maschinellen Lernen am Beispiel der Glasumformung
Mende, Hendrik; Vogel, Paul-Alexander; Padrón Hinrichs, Marcos; Schmitt, Robert
Journal Article
2019Industrie 4.0. Kommunikationssystem für die Produktion der Zukunft
Kiesel, Raphael; Massonet, Angela; Zhou, Beiyan; Heutmann, Timo; Schmitt, Robert H.
Journal Article
2019Influence of Elevated Intra-abdominal Pressure on Suture Tension Dynamics in a Porcine Model
Schachtrupp, A.; Wetter, O.; Höer, J.
Journal Article
2019Influence of Glassy Carbon Surface Finishing on its Wear Behavior during Precision Glass Moulding of Fused Silica
Grunwald, Tim; Wilhelm, Dennis Patrick; Dambon, Olaf; Bergs, Thomas
Journal Article
2019Integrated Energy Efficiency in Production
Heutmann, Timo; Zhou, Beiyan; Schommer, C.; Schmitt, R.H.
Journal Article
2019Investigation of the negative influence of cooling lubricants on the deformation of the machine tool structure
Brecher, Christian; Tzanetos, Filippos; Zontar, Daniel
Conference Paper
2019Karosseriebauteile lokal verstärken
Straeten, Kira van der; Kukla, Christian
Journal Article
2019Kollaboration sorgt für nächsten Schub
Schuh, Günther; Scholz, Paul
Journal Article
2019Korrekturmodelle thermisch bedingter TCP-Verlagerungen mit Hilfe maschinenintegrierter Verformungssensoren
Klatte, Michel
Dissertation
2019Lab-on-a Disc - Automated Production of Microfluidic Systmes
Berger, Marvin; Voebel, Toni; Rohrbeck, Malte; Zontar, Daniel; Ducrée, Jens; Brecher, Christian
Poster
2019Laser-based measurement of thermo-elastic structural deviation of machine tools
Brecher, C.; Lee, T.H.; Teichert, J.; Tzanetos, F.; Zontar, D.
Conference Paper
2019Leitsysteme 4.0: Herausforderungen und Potenziale der Industrie 4.0 für flexible Produktionsleitsysteme
Jung, Sven; Schnichels, Alexander; Schmitt, Robert; Kuhlenkötter, Bernd; Prinz, Christopher
Journal Article
2019A load-adaptive and predictive control of energy-efficient building automation in production environment
Zhou, Beiyan; Chikkala, Jayaaditya; Schmitt, Robert
Journal Article
2019Locally Reinforced Auto Body Parts
Straeten, Kira van der; Kukla, Christian
Journal Article
2019Lokale Blecherwärmung steigert Bearbeitungsqualität
Schmidt, Florian
Internet Contribution
2019Machine Learning and Artificial Intelligence in Production. Application Areas and Publicly Available Data Sets
Krauß, Jonathan; Dorißen, Jonas; Mende, Hendrik; Frye, Maik; Schmitt, Robert H.
Conference Paper
2019Maschinelles Lernen in der Produktion. Anwendungsgebiete und frei verfügbare Datensätze
Krauß, Jonathan; Dorißen, Jonas; Mende, Hendrik; Frye, Maik; Schmitt, Robert H.
Journal Article
2019Methodik zur Bestimmung von Starting Solutions im B2B-Kontext
Schuh, G.; Wentzel, D.; Dölle, C.; Dickmann, P.; Mendl-Heinisch, M.
Journal Article
2019Methodology for Integration of Additive Manufacturing in Tool Manufacturing Process Chains
Bergs, Thomas; Arntz, Kristian; Wollbrink, Moritz
Conference Paper
2019Methodology for Integration of Additive Manufacturing in Tool Manufacturing Process Chains
Wollbrink, Moritz; Prümmer, Marcel; Arntz, Kristian; Bergs, Thomas
Conference Paper
2019Methodology for the design of technology strategies in a volatile business environment
Schuh, G.; Patzwald, M.; Scholz, P.
Conference Paper
2019Model Predictive Force Control in Grinding based on a Lightweight Robot
Husmann, S.; Stemmler, S.; Hähnel, Sebastian; Vogelgesang, S.; Abel, D.; Bergs, Thomas
Journal Article
2019Modeling and Optimizing Data Transfer in GPU-Accelerated Optical Coherence Tomography
Schrödter, Tobias; Pallasch, David; Wienke, Sandra; Schmitt, Robert; Müller, Matthias S.
Conference Paper
2019Modell zur typenbasierten Gestaltung von firmeninternen Inkubatoren
Lau, Felix
Dissertation
2019Modellbasierte, adaptive Prozessregelung für das Laserstrahlstrukturieren
Pothen, Mario
Dissertation
2019Modellierung des Schleifprozesses beim Einsatz von gummigebundenen Schleifscheiben
Kretschmer, Arne
Dissertation
2019Need-based technology development of a scenario specific fuel cell for commercial vehicles
Baum, Christoph; Scholz, Paul
Conference Paper
2019Next level production networks
Friedli, T.; Schuh, G.; Lanza, G.; Remling, D.; Gützlaff, A.; Stamer, F.
Journal Article
2019Offline development of active-alignment-algorithms by efficient interpolation of discrete databases
Hoeren, Maximilian; Zontar, Daniel; Sauer, Sebastian; Schmetz, Arno; Berger, Marvin; Müller, Tobias; Brecher, Christian
Conference Paper
2019Optical coherence tomography for non-destructive testing
Zechel, Fabian; Kunze, Rouwen; König, Niels; Schmitt, Robert H.
Journal Article
2019Optimization of the temperature field for laser hardening of cold-work tool steel
Arntz, Kristian; Schulz, Martin
Conference Paper
2019Optimized Temperature Distribution for Laser Hardening with Freeform Mirrors
Bergs, Thomas; Schulz, Martin; Gräfe, Stefan; Riepe, Jan; Arntz, Kristian
Conference Paper
2019Periphery evaluation for interlinked manufacturing systems in industrial tooling
Prümmer, Marcel; Bergs, Thomas; Arntz, Kristian; Lürken, Christian
Journal Article
2019Planung und Steuerung von frei verketteten Montagesystemen. Zuordnung von Aufträgen zu Montageressourcen in der Planung und im Betrieb
Göppert, A.; Lettmann, P.; Jung, Sven; Grunert, Dennis; Hüttemann, G.; Schmitt, Robert H.
Journal Article
2019Polygon scanner based ultra-short pulse laser processing for continuous manufacturing
Priwisch, M.; Dormann, S.; Zontar, D.; Hönninger, C.; Penning, L.; Loor, R. de; Bruneel, D.; Brecher, C.
Conference Paper
2019Prädikatives Risikomanagement in der Produktion - Mit MES Ausschüsse reduzieren und Fertigungsfehler vermeiden
Fath, Daniel; Möller, Michael; Kiesel, Raphael; Schmitt, Robert; Müller, Tobias
Journal Article
2019Prädiktive Werkzeug- und Prozessauslegung für das Räumen von Nickelbasislegierungen mit Hartmetallwerkzeugen
Seimann, Martin
Dissertation
2019Prädiktives Risikomanagement in der Produktion. Mit MES Ausschüsse reduzieren und Fertigungsfehler vermeiden
Fath, Daniel; Möller, Michael; Kiesel, Raphael; Schmitt, Robert H.; Müller, Tobias
Journal Article
2019Predictive control of a synchronized individual production
Heutmann, Timo; Schmitt, Robert
Journal Article
2019Process optimization of wire-based laser metal deposition of titanium
Schulz, M.; Klocke, F.; Riepe, J.; Klingbeil, N.; Arntz, K.
Journal Article
2019Production Analytics. Produktionsdaten anwendergerecht auswerten
Schuh, G.; Prote, J.-P.; Sauermann, F.; Schmitz, S.
Journal Article
2019Production strategies for the medical technology of tomorrow. Trend report
Ochs, Jelena; Berger, Marvin; Harnisch, Emely; Helden, Jonathan von; Jung, Sven; Kostyszyn, Kevin; Krauss, Jonathan; König, Niels; Skazik-Voogt, Claudia
Report
2019Produktionsstrategien für die Medizintechnik von morgen. Trendreport
Ochs, Jelena; Berger, Marvin; Harnisch, Emely; Helden, Jonathan von; Jung, Sven; Kostyszyn, Kevin; Krauss, Jonathan; König, Niels; Skazik-Voogt, Claudia
Report
2019Pulsed Laser Influence on Two-Beam Laser Metal Deposition
Bergs, Thomas; Schulz, Martin; Gipperich, Marius; Riepe, Jan; Arntz, Kristian
Conference Paper
2019Pure waterjet controlled depth machining for stripping ceramic thermal barrier coatings on turbine blades
Bergs, Thomas; Borrmann, J.P.; Schüler, Manuel; Herrig, Tim; Döring, J.-E.
Journal Article
2019Quality Improvement of Milling Processes Using Machine Learning-Algorithms
Frye, Maik; Schmitt, Robert H.
Conference Paper
2019Quantification of value added structure shifts and strategic reorientation by means of diversification analyses
Scholz, Paul; Schuh, Günther; Kreutzer, Ramon
Conference Paper
2019Quantitative articular cartilage sub-surface defect assessment using optical coherence tomography
Michalik, R.; Pauer, T.; Brill, N.; Knobe, M.; Tingart, M.; Jahr, H.; Truhn, D.; Nebelung, S.
Journal Article
2019Replicative manufacturing of glass optics with functional microstructures
Rojacher, Cornelia; Grunwald, Tim; Bergs, Thomas
Conference Paper
2019Schwingungsunterstütztes Stirnschleifen. Schwingungsunterstütztes Schleifen von Gusseisen zur Reduktion kinematisch bedingter Schleifspuren
Hähnel, Sebastian; Hoff, S.; Grunwald, Tim; Bergs, Thomas
Journal Article
2019Selection and Application of Machine Learning-Algorithms in Production Quality
Krauß, Jonathan; Frye, Maik; Döhler Beck, Gustavo Teodoro; Schmitt, Robert H.
Conference Paper
2019Simulation of electrical conductivity for nanoparticles and nanotubes composite sensor according to geometrical properties of nanomaterials
Min, Soo-Hong; Lee, Tae Hun; Lee, Sangwook; Song, Ji-Hyeon; Lee, Gil-Yong; Zontar, Daniel; Brecher, Christian; Ahn, Sung-Hoon
Journal Article
2019Smart Devices in Production System Maintenance
Permin, Eike; Lindner, Florian; Kostyszyn, Kevin; Grunert, Dennis; Lossie, Karl; Schmitt, Robert; Plutz, Martin
Book Article
2019Statistical Certainties of Expert-Supported Quality Forecasts for Groups of Product Characteristics or Process Parameters
Kostyszyn, Kevin; Schmitt, Robert
Conference Paper
2019Technische Heimaten für menschliche Zellen
Leyens, Christoph; Klotzbach, Udo; Sonntag, Frank; Wolperdinger, Markus; Loskill, Peter; Bauernhansl, Thomas; Traube, Andreas; Brecher, Christian; Schmitt, Robert; König, Niels
Book Article
2019Technological trends in context of industry 4.0 and their industrial applications
Schuh, G.; Scholz, P.; Patzwald, M.
Conference Paper
2019Technologiefrüherkennung gestalten - Acht Erfolgsfaktoren
Schuh, Günther; Scheuer, Thomas
Study
2019Temperature analysis for the laser-assisted tape winding process of multi-layered composite pipes
Schäkel, Martin; Hosseini, S.M. Amin; Janssen, Henning; Baran, Ismet; Brecher, Christian
Journal Article
2019Temperature calculation in metal substrates during two-photon polymerization
Harnisch, Emely; Venek, Tommy; Nohr, Svenja; König, Niels; Schmitt, Robert
Journal Article
2019Thermal Skin Effect in Laser-Assisted Tape Placement of Thermoplastic Composites
Weiler, Thomas
Dissertation
2019Transfer von Innovationen aus Corporate Inkubatoren. Empirische Studie
Schuh, Günther; Vogt, Florian; Maurer, Dennis
Report
2019A two-phased risk management framework targeting SMEs project portfolios
Ponsard, C.; Germeau, F.; Ospina, G.; Bitter, J.; Mende, H.; Vossen, R.; Schmitt, R.H.
Conference Paper
2019Two-photon polymerization on metal surfaces for structuring moulding tools
Harnisch, Emely
Dissertation
2019Ultrapräzisionszerspanung von Hartmetall mit monokristallinen Diamantwerkzeugen
Doetz, Marius
Dissertation
2019Untersuchung des Drahtsystems zur Prozessstabilisierung für das drahtbasierte Laserauftragschweißen in der additiven Fertigung
Klingbeil, Nils
Dissertation
2019Verfahren sowie Vorrichtung zur Prüfung geometrischer Eigenschaften optischer Komponenten
Krappig, Reik; König, Niels; Riediger, Max
Patent
2019Verfahren zum Beschichten eines Substrats sowie Vorrichtung zur Durchführung des Verfahrens
Arntz, Kristian; Janssen, Andreas; Schulz, Martin; Schumacher, Harald
Patent
2019Verfahren zur additiven Fertigung sowie Substrateinheit-System
Arntz, Kristian; Maslo, Semir; Wollbrink, Moritz; Zimmer, Daniel
Patent
2019Verfahren zur kombinierten Form- und Zentrierprüfung mikrooptischer Asphären mit optischer Kohärenztomographie
Riediger, Max; Schmitt, Robert
Journal Article
2019Vorrichtung und Verfahren zur Ausrichtung von polarisationserhaltenden Lichtleitfasern
Haag, Sebastian; Alippi, Andrea; Dekker, Ronald; Müller, Tobias; Zontar, Daniel
Patent
2019Wirksamkeit tribologischer Mikrostrukturen bei extremen Einsatzbedingungen und Ableitung eines Fertigungsmodells für das UKP-Laserabtragen
Janssen, Andreas
Dissertation
2019Wirtschaftliche Produktion von FVK-Automobilbauteilen. Lösungen für den Antriebsstrang der Zukunft
Schulz, Malena
Internet Contribution
20186 steps to EN 9100 certification
Vollmer, Thomas; Bünck, Matthias; Niedermeyer, Angela; Schulte, Tobias; Schmitt, Robert
Journal Article
2018Agile Einheiten werden Taktgeber
Schuh, Günther; Kreutzer, Ramon; Patzwald, Marc
Journal Article
2018Analysis of form deviation in non-isothermal glass molding
Kreilkamp, Holger; Grunwald, Tim; Dambon, Olaf; Klocke, Fritz
Conference Paper
2018Approach for zero defect manufacturing: Geometric calibration of five-axis machine tools for blisk manufacturing process
Lee, T.H.; Behrens, J.; Gierlings, S.; Brecher, C.
Conference Paper
2018Automated assembly of lens barrels with active wavefront sensor guiding
Berger, Marvin; Müller, Tobias; Meiers, Bernd; Sauer, Sebastian; Krappig, Reik; Baum, Christoph; Brecher, Christian
Conference Paper
2018Automated assembly of microfluidic "lab-on-a-disc"
Berger, Marvin; Müller, Tobias; Voebel, Toni; Baum, Christoph; Glennon, T.; Mishra, R.; Kinahan, D.; King, D.; Ducrée, J.; Brecher, Christian
Conference Paper
2018Automated polarization control for the precise alignment of laser-induced self-organized nanostructures
Hermens, Ulrike; Pothen, Mario; Winands, Kai; Arntz, Kristian; Klocke, Fritz
Journal Article
2018Automated shaping of laser-induced nanoripples on freeform surfaces
Hermens, Ulrike
Poster
2018A Bayesian approach to process model evaluation in short run SPC
Permin, Eike; Voigtmann, Christoph; Schmitt, Robert H.
Journal Article
2018Ein Beitrag zur Modellierung des thermischen Umgebungseinflusses an Werkzeugmaschinen
Brecher, Christian; Kneer, Reinhold; Spierling, Robert; Frekers, Yona; Fey, Marcel
Journal Article
2018Benchmarking des Senkerosionsprozesses
Klink, Andreas; Schneider, Sebastian; Prümmer, Marcel
Book Article
2018Berücksichtigung der Zeitunsicherheit für eine robuste, synchronisierte Einzelfertigung
Heutmann, Timo; Tils, Alexander; Schmitt, Robert
Conference Paper
2018Bias voltage effect on the mechanical properties, adhesion and milling performance of PVD films on cemented carbide inserts
Skordaris, G.; Bouzakis, K.-D.; Charalampous, P.; Kotsanis, T.; Bouzakis, E.; Bejjani, R.
Journal Article
2018Bias voltage optimum adjustment considering coatings' strength and adhesion requirements when cutting various steels
Skordaris, G.; Bouzakis, K.-D.; Kotsanis, T.; Charalampous, P.; Bouzakis, E.; Bejjani, R.
Journal Article
2018Characteristics of Disruptive Innovations. A Description Model Focused on Technical products
Schuh, Günther; Wetterney, Tim; Vogt, Florian
Conference Paper
2018A characterization of quality of sheared edge in fine blanking using edge-computing approach
Trauth, Daniel; Stanke, Joachim; Feuerhack, Andreas; Bergs, Thomas; Mattfeld, Patrick; Klocke, Fritz
Journal Article
2018A Comparative Study of Polarity-related Effects in Single Discharge EDM of Titanium and Iron Alloys
Klocke, F.; Mohammadnejad, M.; Holsten, M.; Ehle, L.; Zeis, M.; Klink, A.
Journal Article
2018The connected worker
Plutz, Martin
Journal Article
2018Continuous-flow, microfluidic, qRT-PCR system for RNA virus detection
Fernández-Carballo, B. Leticia; McBeth, Christine; McGuiness, Ian; Kalashnikov, Maxim; Baum, Christoph; Borrós, Salvador; Sharon, Andre; Sauer-Budge, Alexis F.
Journal Article
2018A critical review of FEM models to simulate the nano-impact test on PVD coatings
Skordaris, G.; Bouzakis, K.; Charalampous, P.
Conference Paper
2018Cutting force model for gear honing
Bergs, T.
Journal Article
2018Damage Evolution in Nakajima Tests of DP800 Dual Phase Steel
Bergs, T.; Nick, M.; Trauth, D.; Klocke, F.
Conference Paper
2018Data Collection and Analysis for the Creation of a Digital Shadow During the Production of Thermoplastic Composite Layers in Unbonded Flexible Pipes
Schäkel, Martin; McNab, John; Dodds, Neville; Peters, Tido; Janssen, Henning; Brecher, Christian
Conference Paper
2018Datenbedarfe für eine energie-flexible Produktionsplanung und -steuerung
Schuh, Günther; Schmitt, Robert; Prote, Jan-Philipp; Ellerich, Max; Thomas, Katharina; Chhor, Jimmy; Sauermann, Frederick; Funk, Franziska Katharina
Journal Article
2018Definition of smart retrofitting: First steps for a company to deploy aspects of industry 4.0
Guerreiro, Bruno V.; Lins, Romulo G.; Sun, Jianing; Schmitt, Robert
Conference Paper
2018Den Fluidtransport bei Echsen verstehen
Winands, Kai
Journal Article
2018Den Wert der Daten korrelieren. Wertschöpfung mit Big Data
Dorißen, Jonas; Krauß, Jonathan; Mende, Hendrik; Niendorf, Laura
Journal Article
2018Deriving requirements for the organizational structure of corporate incubators
Schuh, G.; Lau, F.; Dyba, C.; Vogt, F.
Conference Paper
2018Design and function for freeform surfaces. How to texture 3D parts with micro- and nanostructures automated and distortion-free
Mescheder, Holger; Hermens, Ulrike
Journal Article
2018Design framework for model-based self-optimizing manufacturing systems
Thombansen, Ulrich; Buchholz, Guido; Frank, Daniel; Heinisch, Julian; Kemper, Maximilian; Pullen, Thomas; Reimer, Viktor; Rotshteyn, Grigory; Schwenzer, Max; Stemmler, Sebastian; Abel, Dirk; Gries, Thomas; Hopmann, Christian; Klocke, Fritz; Poprawe, Reinhart; Reisgen, Uwe; Schmitt, Robert
Journal Article
2018Digitalisierung verstehen und erleben
Schuh, G.; Mühlbradt, T.; Prote, J.-P.; Gützlaff, A.; Ays, J.; Schmidhuber, M.; Schlosser, T.; Steinberger, V.
Journal Article
2018Digitalized glass optics production
Staasmeyer, J.-H.; Liu, G.; Dambon, O.
Conference Paper
2018Disruption-oriented product planning: Towards a framework for a planning process for disruptive products
Schuh, G.; Wetterney, T.; Lau, F.; Schmidt, T.
Conference Paper
2018Ductile grinding of tungsten carbide applying standard CNC machines
Doetz, M.; Dambon, O.; Klocke, F.; Vogt, C.; Rascher, R.; Faehnle, O.
Conference Paper
2018Ductile grinding of tungsten carbide molds applying standard CNC machines
Vogt, C.; Fähnle, O.; Rascher, R.; Doetz, M.; Dambon, O.; Klocke, F.
Conference Paper
2018Ductile mode single point diamond turning (SPDT) of binderless tungsten carbide molds
Doetz, M.; Dambon, O.; Klocke, F.; Vogt, C.; Rascher, R.; Fähnle, O.
Conference Paper
2018Echtzeit-Maschinendaten auf mobile Endgeräte bringen: Smart visualisiert
Lindner, Florian; Permin, Eike; Schmitt, Robert; Gesthuysen, Frederik
Journal Article
2018Effect of niobium on microstructure-property relationship in H11 hot-work tool steel via wire- and powder-based laser metal deposition
Teli, M.; Klocke, F.; Arntz, K.; Winands, K.
Journal Article
2018Energieeffizient vernetzen. Energiemanagement
Zhou, Beiyan
Journal Article
2018Erfolgreich CAx-Prozessketten Gestalten im Werkzeugbau
Boos, Wolfgang; Arntz, Kristian; Prümmer, Marcel; Wollbrink, Moritz; Horstkotte, Rainer; Pothen, Mario; Gerretz, Vincent
Study
2018Erfolgreich Fräsen im Werkzeugbau
Boos, Wolfgang; Arntz, Kristian; Johannsen, Lars; Prümmer, Marcel; Horstkotte, Rainer; Ganser, Philipp; Venek, Tommy; Gerretz, Vincent
Study
2018Erfolgsfaktoren im Technologiemanagement
Schuh, Günther; Zeller, Paul
Report
2018Excellence in Production 2018
Prümmer, Marcel; Helbig, Jens; Horstkotte, Rainer; Ebbecke, Christoph
Book Article
2018Experimental and numerical investigation of dual phase steels formability during laser-assisted hole-flanging
Motaman, S.A.H.; Komerla, K.; Storms, T.; Prahl, U.; Brecher, C.; Bleck, W.
Conference Paper
2018The external scent efferent system of selected European true bugs (Heteroptera): A biomimetic inspiration for passive, unidirectional fluid transport
Hischen, Florian; Buchberger, Gerda; Plamadeala, Cristina; Armbruster, Oskar; Heiss, Ernst; Winands, Kai; Schwarz, Martin; Jüttler, Bert; Heitz, Johannes; Baumgartner, Werner
Journal Article
2018Fake News in der Produktion
Niedermeyer, Angela; Kostyszyn, Kevin; Lossie, Karl
Blog Post
2018Frei verkettete Montagesysteme - Ein Ausblick
Göppert, Amon; Hüttemann, Guido; Jung, Sven; Grunert, Dennis; Schmitt, Robert H.
Journal Article
2018Freiformflächen mit dem Laser gezielt strukturieren
Mescheder, Holger; Hermens, Ulrike
Journal Article
2018From turning to grinding: Ductile machining with gPVA
Vogt, C.; Fähnle, O.; Rascher, R.; Doetz, M.; Dambon, O.; Klocke, F.
Conference Paper
2018Functional reliability of cognitive control systems for manufacturing processes
Permin, Eike; Lossie, Karl; Schmitt, Robert H.
Journal Article
2018Hellsehen in vier Schritten. Data Analytics für das digitale Qualitätsmanagement
Elser, Hannes; Heutmann, Timo; Lindemann, Marie; Schmitt, Robert
Journal Article
2018Highly modular and generic control software for adaptive cell processing on automated production platforms
Jung, Sven; Ochs, Jelena; Kulik, Michael; König, Niels; Schmitt, Robert H.
Journal Article
2018How additive manufacturing can shape an industry 4.0 environment
Müller, Bernhard; Frieß, Uwe; Langer, Tino; Töppel, Thomas; Gebauer, Mathias; Klaeger, Uwe; Wollbrink, Moritz; Zöllner, Volker; Lausch, Holger
Presentation
2018Im Dreischritt zu Qualität 4.0. Wege zum vorausschauenden Qualitätsmanagement
Heutmann, Timo; Schmitt, Robert
Journal Article
2018Implementierte Industrie
Schmitt, Robert; Kiesel, Raphael; Vollmer, Thomas
Journal Article
2018Improving the cutting performance of coated tools via appropriate pre- and post-treatments
Bouzakis, K.; Skordaris, G.; Bouzakis, E.; Kotsanis, T.
Conference Paper
2018Increasing critcal depth of cut in ductile mode machining of tungsten carbide by process parameter controlling
Doetz, M.; Dambon, O.; Klocke, F.; Lee, J.; Fähnle, O.; Langenbach, E.
Conference Paper
2018The influence of the tape placement process on part characteristics based on different Ud-tape qualities
Schulz, M.; Buschhoff, C.; Janssen, H.; Brecher, C.
Conference Paper
2018Instrument zur Steigerung des branchenübergreifenden Verwertungspotenzials von Fertigungstechnologien
Graw, Myron
Dissertation
2018Integration of machining system capability information into a CAx software environment for complex tool trajectory prediction
Szipka, K.; Dax, P.; Archenti, A.; Degen, F.; Hedlind, M.
Journal Article
2018Investigation on the Variability of Existing Models for Simulation of Local Temperature Field during a Single Discharge for Electrical Discharge Machining (EDM)
Klocke, F.; Mohammadnejad, M.; Zeis, M.; Klink, A.
Journal Article
2018IT-Sicherheit in der vernetzten Produktion. Wertschöpfungssteigerung in der Produktion dank sicherer cyberphysischer Systeme
Schlenker, Nadine; Reusch, Philipp; Kiesel, Raphael; Schmitt, Robert
Journal Article
2018Klein, kleiner, Nano. Optische Oberflächenmessverfahren zur Charakterisierung von Mikro- und Nanostrukturen
König, Niels; Schmitt, Robert H.
Journal Article
2018Laser-based and CAx-assisted system solution for the automated mold repair - ToolRep
Winands, Kai
Poster
2018Leitfaden für den industriellen Werkzeugbau
Prümmer, Marcel
Journal Article
2018Limits to simplified calculation of uncut chip thickness in milling
Smyczek, G.; Rotshteyn, G.; Degen, F.; Bergs, T.
Journal Article
2018Material Removal Simulation for Abrasive Water Jet Milling
Klocke, F.; Schreiner, T.; Schüler, M.; Zeis, M.
Journal Article
2018Measurement and analysis of thermo-elastic deviation of five-axis machine tool using dynamic R-test
Brecher, C.; Behrens, J.; Klatte, M.; Lee, T.H.; Tzanetos, F.
Journal Article
2018Metrological analysis of a mechatronic system based on novel deformation sensors for thermal issues in machine tools
Brecher, C.; Klatte, M.; Lee, T.H.; Tzanetos, F.
Journal Article
2018Mobile Roboter zur freien Verkettung von Montagestationen. Wie lassen sich mobile Roboter entwickeln und einsetzen, um ein flexibles Transportsystem zu realisieren?
Göppert, Amon; Grunert, Dennis; Pöhler, Stefan; Hüttemann, Guido; Schmitt, Robert
Journal Article
2018Model-predictive control for the automated production of thermoplastic composite pressure vessels
Schäkel, Martin; Janssen, Henning; Brecher, Christian
Conference Paper
2018Modeling and Simulation of the Microstructure Evolution of 42CrMo4 Steel during Electrochemical Machining
Klocke, F.; Harst, S.; Zeis, M.; Klink, A.
Journal Article
2018Neuronal induktive Kultivierungsmatrix
Baum, Christoph; Gutermuth, Angela
Patent
2018Non-contact inspection of complex optical components
Depiereux, Frank; Rämer, Kurt
Journal Article
2018Normgerecht im Flugzeugbau. Systematisch zur Zertifizierung nach EN 9100
Vollmer, Thomas; Niedermeyer, Angela; Schmitt, Robert; Bünck, Matthias
Journal Article
2018A Novel Modeling Approach for the Simulation of Precise Electrochemical Machining (PECM) with Pulsed Current and Oscillating Cathode
Klocke, F.; Heidemanns, L.; Zeis, M.; Klink, A.
Journal Article
2018Numerical-experimental investigation of load paths in DP800 dual phase steel during Nakajima test
Bergs, Thomas; Nick, Matthias; Feuerhack, Andreas; Trauth, Daniel; Klocke, Fritz
Conference Paper
2018Ohne Turbulenzen ins Audit. In sechs Schritten zum zertifizierten Zulieferer nach EN 9100
Vollmer, Thomas; Schmitt, Robert H.; Bünck, Matthias
Journal Article
2018One for all and all for one
Winands, Kai
Journal Article
2018Online-Korrektur für thermisch-bedingte Fehler bei Werkzeugmaschinen
Tzanetos, Filippos; Lowis, Steffen
Journal Article
2018Optical Coherence Tomography. Towards New Medical Applications
König, Niels; Riediger, Max; Wilhelm, Dirk; Witte, Michael; Masamune, Ken; Schmitt, Robert
Conference Paper
2018Optische Kohärenz Tomographie (OCT) zur intraoperativen Untersuchung von Gewebeproben
Beck, Rafael; Riediger, M.; Dietz, A.; Pallasch, D.; König, N.; Witte, M.; Schmitt, R.; Chalopin, C.
Journal Article
2018Optische Kohärenztomographie
König, Niels
Book Article
2018Optische Kohärenztomographie zur kombinierten Form- und Zentrierprüfung kleinaperturiger optischer Komponenten
Riediger, Max; Schmitt, Robert
Journal Article
2018Overlap ratio in wire- and powder-based laser metal deposition of H11 + Nb for hot forging dies
Teli, M.; Klocke, F.; Arntz, K.; Winands, K.; Klingbeil, N.; Arrizubieta, J.I.
Conference Paper
2018A practical approach for the optimization of channel integrity in the sealing of shallow microfluidic devices made from cyclic olefin polymer
Ganser, Philipp; Baum, Christoph; Chargin, David; Sauer-Budge, Alexis F.; Sharon, Andre
Journal Article
2018Präzise Fertigung von Großbauteilen
Ohlenforst, Markus; Wennemer, Matthias; Behrens, Jan; Peterek, Martin
Book Article
2018Precise phase demodulation of single carrier-frequency interferogram by pixel-level Lissajous figure and ellipse fitting
Liu, Fengwei; Wu, Yongqian; Wu, Fan; König, Niels; Schmitt, Robert; Wan, Yongjian; Xu, Yan
Journal Article
2018Precision glass molding of fused silica optics
Friedrichs, Marcel; Dambon, Olaf; Pongs, Guido; Zhang, Lin; Yi, Allen Y.; Klocke, Fritz
Conference Paper
2018Process control in ductile mode machining of tungsten carbide
Doetz, M.; Dambon, O.; Klocke, F.; Faehnle, O.; Langenbach, E.
Conference Paper
2018Process optimization of wire based laser metal deposition of titanium
Schulz, M.; Klocke, F.; Riepe, J.; Klingbeil, N.; Arntz, K.
Conference Paper
2018Process window analysis of ductile mode machining of binderless tungsten carbide molds
Doetz, M.; Lee, J.E.; Dambon, O.; Klocke, F.; Langenbach, E.; Faehnle, O.
Conference Paper
2018Produktionsstätte - kommunikativ und smart
Zhou, Beiyan; Schmitt, Robert
Journal Article
2018Prozesskraftmessung mit spindelintegrierter Sensorik
Brecher, C.; Eckel, H.-M.; Fey, M.; Butz, F.
Journal Article
2018Quantitative Beschreibung der Schleifscheibentopographie
Barth, S.; Röttger, J.; Trauth, D.; Mattfeld, P.; Bergs, T.; Klocke, F.
Journal Article
2018Reconfigurable Robotic Solution for Effective Finishing of Complex Surfaces
Hähnel, S.; Pini, F.; Leali, F.; Dambon, O.; Bergs, T.; Bletek, T.
Conference Paper
2018Reifegradmanagement zur Messung der Produktqualität in der Entwicklung
Klauke, Alexandra; Fleischer, Karsten; Schmitt, Robert; Vollmer, Thomas; Permin, Eike
Journal Article
2018Requirements gathering and validation for risk-oriented tool support in supply chains
Printz, Stephan; Ponsard, Christophe; Cube, Johann Philipp von; Landtsheer, Renaud de; Ospina, Gustavo; Massonet, Philippe; Schmitt, Robert; Jeschke, Sabina
Conference Paper
2018Resource Evaluation of Interlinked Manufacturing Systems in Tooling
Prümmer, Marcel; Bergs, Thomas; Lürken, Christian
Conference Paper
2018Ressourceneffizienz-Wertstrom
Vollmer, Thomas; Kerkhoff, Johannes; Große Böckmann, Markus; Permin, Eike
: Schmitt, Robert (Editor)
Book
2018Scalability of the precision glass molding process for an efficient optics production
Liu, G.; Staasmeyer, J.-H.; Grunwald, T.; Dambon, O.
Conference Paper
2018Service-oriented communication and control system architecture for dynamically interconnected assembly systems
Jung, Sven; Grunert, Dennis; Schmitt, Robert H.
Conference Paper
2018Smart Devices. Vermittler zwischen Mensch, Maschine und Software
Lindner, Florian; Kostyszyn, Kevin Nikolai; Grunert, Dennis; Lossie, Karl; Schmitt, Robert
Journal Article
2018SPDT and standard CNC-grinding of tungsten carbide molds for precision glass molding
Vogt, C.; Faehnle, O.; Doetz, M.
Conference Paper
2018Das Stammzelllabor der Zukunft. Forschen in einer automatisierten Testumgebung
Ochs, Jelena; Jung, Sven; Piotrowski, Tobias; Niessing, Bastian; König, Niels; Schmitt, Robert
Internet Contribution
2018Start of EU project: Weld-seam characterisation in adaptive lase melting deposition
Riedel, Christoph
Journal Article
2018Study for Combined Wire + Powder Laser Metal Deposition of H11 and Niobium
Teli, Mahesh; Klocke, Fritz; Arntz, Kristian; Winands, Kai; Schulz, Martin; Oliari, Stella
Journal Article
2018Surface adaptive fast axis ultra precision turning
Brozio, Matthias; Sensen, Dominik; Wenzel, Christian; Freutel, Simon; Brecher, Christian
Conference Paper
2018Surface integrity in ultra-precision grinding of transparent ceramics
Klocke, Fritz; Dambon, Olaf; Bletek, Thomas; Höche, Thomas; Naumann, Falk; Hutzler, Thomas
Journal Article
2018Target-oriented analysis of resource consumption in manufacturing process chains
Demmer, Axel; Klingbeil, Nils; Klocke, Fritz; Putz, Matthias; Schmitt, Robert; Vollmer, Thomas
Journal Article
2018Technology-based assessment of subtractive machining processes for mold manufacture
Klink, Andreas; Arntz, Kristian; Johannsen, Lars; Holsten, Maximilian; Chrubasik, Lothar; Winands, Kai; Wollbrink, Moritz; Bletek, Thomas; Gerretz, Vincent; Bergs, Thomas
Journal Article
2018Thermally induced volumetric error compensation by means of integral deformation sensors
Baum, Christoph; Brecher, Christian; Klatte, Michel; Lee, Tae Hun; Tzanetos, Filippos
Journal Article
2018Three wagons method applied: Optimization of level of surface roughness within ductile mode grinding of tungsten carbide molds
Doetz, M.; Faehnle, O.; Klocke, F.; Dambon, O.; Langenbach, E.
Conference Paper
2018Three wagons method to analyze ductile mode grinding processes
Faehnle, O.; Doetz, M.; Dambon, O.; Langenbach, E.
Conference Paper
2018Time-specific innovation transfer from corporate incubators - Derivation of design options based on the phases of initiation and execution
Schuh, Günther; Vogt, Florian; Wetterney, Tim
Conference Paper
2018Transient thermal analysis of laser-assisted thermoplastic tape placement at high process speeds by use of analytical solutions
Weiler, T.; Emonts, M.; Wollenburg, L.; Janssen, H.
Journal Article
2018Vacuum-assisted precision molding of 3D thin microstructure glass optics
Vu, A.T.; Vogel, P.-A.; Dambon, O.; Klocke, F.
Conference Paper
2018Verfahren und Vorrichtung für das Recycling von thermoplastischem Faserverbundmaterial
Janssen, Henning
Patent
2018Verfahren und Vorrichtung zur Bearbeitung eines Werkstückes
Schüler, Manuel
Patent
2018Wettbewerb Excellence in Production zum Werkzeugbau des Jahres 2018
Boos, Wolfgang; Salmen, Michael; Kelzenberg, Christoph; Helbig, Jens; Prümmer, Marcel; Ebbecke, Christoph; Horstkotte, Rainer
Journal Article
2018Wire- and powder-based laser metal deposition of H11 wire and niobium powder for hot forging application
Teli, Mahesh
Poster
2018Wire-based laser metal deposition (LMD-W) for additive manufacturing influences of the wire feed
Klingbeil, Nils
Poster
2018Wire-based Laser Metal Deposition (LMD-W) of Titanium Grade 5
Schulz, Martin
Poster
2018Wirkweise des Poliermittelträgers beim Polieren optischer Gläser
Wächter, Daniel
Dissertation
20173D bioprinting of GelMA scaffolds triggers mineral deposition by primary human osteoblasts
McBeth, C.; Lauer, J.; Ottersbach, M.; Campbell, J.; Sharon, A.; Sauer-Budge, A.F.
Journal Article
20173D printing meets FRP: More flexibility for highly-stressed components
Janssen, Henning
Journal Article
201770:20:10-Regel sichert Innovation
Drescher, Toni; Zeller, Paul
Journal Article
2017ACAM Research Report Issue 2016
: Wollbrink, Moritz
Scientific Anthology
2017Active alignment of DOE based structured light application in consumer electronics
Zontar, D.; Müller, T.; Sauer, S.; Hettler, N.; Brecher, C.
Conference Paper
2017Additive Fertigung "Vom Pulver zum Fertigteil"
Alkhayat, Moritz; Arntz, Kristian; Klingbeil, Nils; Vollmer, Thomas
Book Article
2017Additive manufacturing of H11 with wire-based laser metal deposition
Holzbach Oliari, Stella; Climaco Monteiro D'Oliveira, Ana Sofia; Schulz, Martin
Journal Article
2017Advances in automation for the production of clinical-grade mesenchymal stromal cells: The AUTOSTEM robotic platform
Ochs, Jelena; Barry, Frank; Schmitt, Robert; Murphy, J. Mary
Journal Article
2017Agile datenbasierte Prozessgestaltung
Schmitt, Robert; Bihler, S.; Bork, H.; Große Böckmann, Markus; Gaukstern, T.; Krauß, Jonathan; Niendorf, Laura; Permin, Eike; Reusch, P.
Conference Paper
2017Agile Produktentwicklung
Schuh, Günther; Diels, F.; Ortlieb, C.; Riesener, M.; Schröder, Stephan
Conference Paper
2017Aktive Gestaltung globaler Produktionsnetzwerke
Friedli, T.; Lanza, G.; Schuh, G.; Treber, S.; Wiech, M.; Gützlaff, A.
Journal Article
2017Ameisen, Navigationsgeräte und fußballspielende Ingenieure
Krauß, Jonathan; Grunert, Dennis; Kiesel, Raphael
Blog Post
2017Analyse von Fräswerkzeugen zur Steigerung der Prozessstabilität bei der Herstellung von Turbinenschaufeln
Schäfer, Alexander; Steinfeldt, Steffen
Journal Article
2017Analysis of critical process parameters of ductile mode grinding of brittle materials
Faehnle, Oliver; Doetz, Marius; Dambon, Olaf
Journal Article
2017Analysis of dimple textured surfaces on cutting tools
Stoeterau, R.L.; Janssen, A.; Mallmann, G.
Journal Article
2017Analysis of spatial and temporal dependencies of the TCP-dislocation measurement for the assessment of the thermo-elastic behavior of 3-axis machine tools
Brecher, Christian; Klatte, Michel; Tzanetos, Filippos
Conference Paper
2017Analysis of the application of poly-nanocrystalline diamond tools for ultra precision machining of steel with ultrasonic assistance
Doetz, Marius; Dambon, Olaf; Klocke, Fritz; Bulla, Benjamin; Schottka, Karl; Robertson, David J.
Conference Paper
2017Application of an unscented Kalman filter for modeling multiple types of machine tool errors
Brecher, C.; Brozio, M.; Klatte, M.; Lee, T.H.; Tzanetos, F.
Journal Article
2017Assessing the value of data. An approach to evaluate the technology driven benefits of smart product data
Schuh, Günther; Kreutzer, Ramon; Patzwald, Marc
Conference Paper
2017Assessment of risks in manufacturing using discrete-event simulation
Landtsheer, R. de; Ospina, G.; Massonet, P.; Ponsard, C.; Printz, S.; Jeschke, S.; Härtel, L.; Cube, J.P. von; Schmitt, R.
Conference Paper
2017Assistenzsysteme in der Produktionstechnik
Klocke, Fritz; Bassett, E.; Bönsch, C.; Gärtner, R.; Holsten, S.; Jamal, R.; Jurke, B.; Kamps, S.; Kerzel, U.; Mattfeld, P.; Shirobokov, A.; Stauder, J.; Stautner, M.; Trauth, D.
Conference Paper
2017Atomic diffusion induced degradation in bimetallic layer coated cemented tungsten carbide
Peng, Zirong; Rohwerder, Michael; Choi, Pyuck-Pa; Gault, Baptiste; Meiners, Thorsten; Friedrichs, Marcel; Kreilkamp, Holger; Klocke, Fritz; Raabe, Dierk
Journal Article
2017Les atouts de l'OCT pour le soudage laser
Ackermann, Philippe
Journal Article
2017Automated tissue dissociation for rapid extraction of viable cells
McBeth, Christine; Gutermuth, Angela; Ochs, Jelena; Sharon, Andre; Sauer-Budge, Alexis F.
Journal Article
2017Automatisierte Montage von Dehnungsmessstreifen auf nicht ebenen 3D-Flächen
Sauer, Sebastian; Kumar, Arun; Brozio, Matthias; Schiek, Christian; Yavuz, Hilmi
Conference Paper
2017Automatisierung in der Arbeitsplanung. Ergebnisse einer Studie
Schuh, G.; Prote, J.-P.; Luckert, M.; Hünnekes, P.
Journal Article
2017The AUTOSTEM platform for closed manufacture of bone marrow-derived mesenchymal stromal cells using a closed, scalable and automated robotic system
Murphy, M.; Barry, F.; Leschke, C.; Vaughan, B.; Gentili, C.; O'Dea, J.; Ogourtsov, V.; Rafiq, Q.A.; Ochs, J.; Kulik, M.; Koenig, N.
Journal Article
2017Baseline haemodynamic and optical properties of the newborn brain and the reproducibility of the measurements: a preliminary report from the BabyLux project
Giovannella, M.; Andresen, B.; Carli, A. de; Chamizo, V.; Pagliazzi, M.; Rehberger, M.; Contini, D.; Pifferi, A.; Spinelli, L.; Donat, R.; Erdmann, R.; Fumagalli, M.; Greisen, G.; Weigel, U.M.; Durduran, T.; Torricelli, A.
Journal Article
2017Berührungslose Prüfung komplexer Optik-Komponenten
Depiereux, Frank; Rämer, Kurt
Journal Article
2017Bewertung von Multitechnologieplattformen
Rey, Jan; Bois-Reymond, Frédéric du; Schmid, Alexander; Trauth, Daniel; Mattfeld, Patrick; Klocke, Fritz; Brecher, Christian
Journal Article
2017Birefringence measurement for validation of simulation of precision glass molding process
Pallicity, T.D.; Vu, A.-T.; Ramesh, K.; Mahajan, P.; Liu, G.; Dambon, O.
Journal Article
2017Calibration of five-axis machine tool using R-test procedure
Brecher, C.; Behrens, J.; Lee, T.H.; Charlier, S.
Conference Paper
2017Capabilities and challenges in transferring the wavefront-based alignment approach to small aperture multi-element optical systems
Krappig, Reik; Schmitt, Robert
Conference Paper
2017CAx-Prozesskette für komplexe Rotationsbauteile
Königs, Michael; Huwer, Tobias; Dax, Paul
Journal Article
2017Chalcogenide glass molding advances precision IR optics
Friedrichs, Marcel; Kreilkamp, Holger
Journal Article
2017Clarification of gap phenomena in precise electrochemical machining by implementing a "virtual sensor"
Klocke, Fritz; Heidemanns, Lukas; Zeis, Markus; Kling, Andreas
Conference Paper
2017Cognition-enhanced, self-optimizing assembly systems
Schmitt, R.; Corves, B.; Loosen, P.; Brecher, C.; Jeschke, S.; Kimmelmann, W.; Hüsing, M.; Stollenwerk, J.; Bertelsmeier, F.; Detert, T.; Haag, S.; Hoffmann, M.; Holters, M.; Kurtenbach, S.; Permin, E.; Prochnau, M.; Storm, C.K.; Janßen, M.
Book Article
2017Compensation of scanner based inertia for laser structuring processes
Pothen, Mario; Winands, Kai; Klocke, Fritz
Journal Article
2017Concept of innovation transfer from corporate incubators
Schuh, Günther; Vogt, Florian; Lau, Felix; Bickendorf, Philipp
Conference Paper
2017Configuration options for corporate incubators - development of a description model using the morphological analysis method
Schuh, Günther; Lau, Felix; Zimmermann, Richard; Vogt, Florian
Conference Paper
2017Continuous assessment of geometrical properties from unidirectional fiber reinforced tapes
Buschhoff, Clemens; Schäkel, Martin; Janssen, Henning; Brecher, Christian
Conference Paper
2017Data collection and utilization during the adaptive production of thermoplastic composite pressure vessels
Peters, Tido; Schäkel, Martin; Janssen, Henning; Brecher, Christian
Presentation
2017Degradation Mechanism of Molds for Precision Glass Molding
Peng, Zirong; Rohwerder, Michael; Friedrichs, Marcel; Choi, Pyuck-Pa; Gault, Baptiste; Meiners, Thorsten; Kreilkamp, Holger; Klocke, Fritz; Raabe, Dierk
Journal Article
2017Description model for goals of corporate incubators
Schuh, Günther; Lau, Felix; Herding, Jannik
Conference Paper
2017Design framework of an ecosystem for network-based innovation. Conceptual research methodology
Schuh, Günther; Wölk, Sebastian
Conference Paper
2017Design of a modular framework for the integration of machines and devices into service-oriented production networks
Jung, Sven; Kulik, Michael; König, Niels; Schmitt, Robert
Conference Paper
2017Determination of information demand for efficient technology monitoring
Schuh, Günther; König, Christina
Conference Paper
2017Digitale Schatten machen Fliegen sicherer
Gierlings, Sascha
Journal Article
2017Disruptive technology scanning. Passive screening versus hands-on experimenting
Schuh, Günther; Kabasci, Patrick
Conference Paper
2017Efficient production of tailored structural thermoplastic composite parts by combining tape placement and 3d printing
Janssen, Henning; Peters, Tido; Brecher, Christian
Journal Article
2017Effiziente Gestaltung der CAx-Prozesskette im Werkzeugbau
Prümmer, Marcel; Wollbrink, Moritz; Henrichs, Oliver
Book Article
2017Energieeffiziente Produktionsstätte durch bedarfsabhängige und innovative Gebäudeautomation. Reduzierung von Energiekosten durch Vernetzung von Gebäudeautomation, PPS-Systemen und Wetter-Forecasts
Schmitt, Robert; Zhou, Beiyan; Vollmer, Thomas
Journal Article
2017Energieflexible Produktionsplanung und -steuerung
Schuh, G.; Prote, J.-P.; Luckert, M.; Sauermann, F.; Thomas, K.
Journal Article
2017Energieorientierte Produktionsplanung und -steuerung
Heutmann, Timo; Schmitt, Robert
Journal Article
2017Energiesparen lohnt sich immer mehr. Wie Energiemanagement und MES kostensparend zusammenwirken
Heutmann, Timo
Journal Article
2017Energy efficiency through a load-adaptive building automation in production
Zhou, Beiyan; Vollmer, Thomas; Schmitt, Robert
Conference Paper
2017Engineering valley - Internet of production auf dem RWTH Aachen Campus
: Schuh, Günther; Brecher, Christian; Klocke, Fritz; Schmitt, Robert
Scientific Anthology
2017Enhancement of personnel competence in industry 4.0 production environment by using Smart Devices
Sun, Jianing; Permin, Eike; Schmitt, Robert
Conference Paper
2017Enhancing resiliency in production facilities through cyber physical systems
Schmitt, Robert; Permin, Eike; Kerkhoff, Johannes; Plutz, Martin; Große Böckmann, Markus
Book Article
2017Entwicklung der Produktions-IT - Potenziale, Herausforderungen und Anwendungsfälle
Vollmer, Thomas; Zhou, Beiyan; Heutmann, Timo; Kiesel, Raphael; Schmitt, Robert
Journal Article
2017Erfolgreich Automatisieren im Werkzeugbau
Boos, Wolfgang; Arntz, Kristian; Johannsen, Lars; Prümmer, Marcel; Wollbrink, Moritz; Wilms, Marcel; Horstkotte, Rainer
Study
2017Erfolgreich Fertigungstechnologien Einsetzen im Werkzeugbau
Boos, Wolfgang; Arntz, Kristian; Johannsen, Lars; Dröscher, Tim; Wollbrink, Moritz; Prümmer, Marcel
Study
2017Erfolgsfaktoren im Technologiemanagement. Fraunhofer IPT kürt Unternehmen mit exzellentem Technologiemanagement
Schuh, Günther; Wellensiek, Markus; König, Christina; Zeller, Paul
Journal Article
2017Evaluation of efficiency and mechanical properties of Inconel 718 components built by wire and powder laser material deposition
Arrizubieta, J.I.; Klocke, Fritz; Klingbeil, Nils; Arntz, Kristian; Lamikiz, A.; Martinez, S.
Journal Article
2017Evaluation of the relevance of melt pool dynamics in Laser Material Deposition process modeling
Arrizubieta, Jon Iñaki; Lamikiz, Aitzol; Klocke, Fritz; Martínez, Silvia; Arntz, Kristian; Ukar, Eneko
Journal Article
2017Evaluation of the shear stresses on surface structured workpieces in dry forming using a novel pin-on-cylinder tribometer with axial feed
Trauth, D.; Bastürk, S.; Hild, R.; Mattfeld, P.; Brögelmann, T.; Bobzin, K.; Klocke, F.
Journal Article
2017Excellence in Production 2017
Kelzenberg, Christoph; Prümmer, Marcel; Helbig, Jens
Book Article
2017Fertigungsverfahren für das Tissue Engineering. Mit Mikro- und Nano-Strukturen zum humanen Gewebeersatz
Skazik-Voogt, C.; Bastuck, T.; Janssen, A.; Gutermuth, A.
Journal Article
2017First-class risk management from second-use data sources
Castaño Reyes, Carmen E.; Kiesel, Raphael; Schmitt, Robert
Conference Paper
2017Flexibilisierung von Maschinenbedienern mit mobilen Endgeräten - Smartes Informationssystem als Erweiterung der klassischen Maschinensteuerung
Lindner, Florian; Permin, Eike; Schmitt, Robert; Gesthuysen, Frederik
Journal Article
2017Fraunhofer-Institut für Produktionstechnologie. Jahresbericht 2016
 
Annual Report
2017Funktionsprinzip der messtechnisch basierten Korrektur thermischer Verlagerungen am Versuchsträger MAX
Riedel, Mirko; Müller, Jens; Klatte, Michel; Tzanetos, Filippos
Conference Paper
2017Ganzheitliche Gestaltung von Lean
Schuh, G.; Prote, J.-P.; Wolff, B.; Dany, S.; Walendzik, P.
Journal Article
2017Gestaltung von Corporate Inkubatoren
Schuh, Günther; Lau, Felix; Vogt, Florian; Zimmermann, Richard
Report
2017Glass material modeling and its molding behavior
Liu, Gang; Vu, Anh Tuan; Dambon, Olaf; Klocke, Fritz
Journal Article
2017Gut sortiert zu neuer Größe. Statistische Absicherung in der Produktion von Einzelteilen und Kleinserien
Kostyszyn, Kevin; Back de Luca, Artur; Schmitt, Robert
Journal Article
2017Handlungsfelder zur erfolgreichen Umsetzung von Industrie 4.0 in der F & E
Schuh, G.; Riesener, M.; Barg, S.; Mattern, C.
Journal Article