Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
202115. Berliner Runde. Neue Konzepte für Werkzeugmaschinen 2021. Begleitband
: Uhlmann, Eckart (Hrsg.); Drieux, Sophie (Red.); Triebel, Florian (Red.)
Conference Proceedings
2021AI-enhanced Identification, Inspection and Sorting for Reverse Logistics in Remanufacturing
Schlüter, M.; Lickert, H.; Schweitzer, K.; Bilge, P.; Briese, C.; Dietrich, F.; Krüger, J.
Journal Article
2021Analysis of influencing factors for the dressing process in double side face grinding
Uhlmann, E.; Lichtschlag, L.
Journal Article
2021Artefaktkorrektur für die 3D-Röntgenbildgebung auf Basis synthetischer Röntgenprojektionen
Melnik, Steffen
: Uhlmann, Eckart
Dissertation
2021Deutsche Normungsroadmap Innovative Arbeitswelt
Adolph, Lars; Albrecht, Philipp; Andersen, Thomas; Börkircher, Mikko; Meer, Jan de; Giertz, Jan-Paul; Jeske, Tim; Kagerer, Frank; Kirchhoff, Britta; Klimiont, Thomas; Minnerup, Jörg; Mühlbradt, Thomas; Müssigbrodt, Matthias; Orth, Ronald; Paproth, Yona; Preuße, Christoph; Richter, Christian; Schumacher, Simon; Senderek, Roman; Stock, Patricia; Tausch, Alina; Tegtmeier, Patricia; Ullrich, Carsten
Report
2021Digitale Unterstützung der aktiven Kundenintegration zur Optimierung der Produktentwicklung
Damerau, Thomas
: Stark, Rainer
Dissertation
2021The Effects of HLAW Parameters for One Side T-Joints in 15 mm Thickness Naval Steel
Churiaque, C.; Sánchez-Amaya, J.M.; Porrúa-Lara, M.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2021Effects on the distortion of Inconel 718 components along a hybrid laser-based additive manufacturing process chain using laser powder bed fusion and laser metal deposition
Uhlmann, E.; Düchting, J.; Petrat, T.; Krohmer, E.; Graf, B.; Rethmeier, M.
Journal Article
2021Einfluss des Post-Processings auf laserstrahlgeschmolzene Bauteile am Beispiel von ß-Titanlegierungen
Gerlitzky, Georg
: Uhlmann, Eckart
Dissertation
2021Einsatzverhalten keramisch gebundener Gleitschleifkörper
Eulitz, Alexander
: Uhlmann, Eckart
Dissertation
2021Ex Situ Residual Stress Analysis of Chemical Vapor Deposited Diamond Coated Cutting Tools by Synchrotron X-Ray Diffraction in Transmission Geometry
Hinzmann, D.; Böttcher, K.; Reimers, W.; Uhlmann, E.
Journal Article
2021Experimental investigation into the effect of supports and overhangs on accuracy and roughness in laser powder bed fusion
Mele, M.; Bergmann, A.; Campana, G.; Pilz, T.
Journal Article
2021Graphische Programmierung von Industrierobotern
Chemnitz, M.; Yordanova, M.; Vick, A.
Journal Article
2021How can the programming of impedance control be simplified?
Cruz, A.B.; Radke, M.; Haninger, K.; Krüger, J.
Journal Article
2021Influence of oscillating magnetic field on the keyhole stability in deep penetration laser beam welding
Üstündağ, Ö.; Bakir, N.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2021Interaktives Lagebild - Ein Werkzeug für das Krisenmanagement in prozessorientierten Unternehmen
Kohl, Holger; Knothe, Thomas; Oertwig, Nicole; Gering, Patrick; Scholz, Julia-Anne
Journal Article
2021Internal Stress Evolution and Subsurface Phase Transformation in Titanium Parts Manufactured by Laser Powder Bed Fusion - An In Situ X-Ray Diffraction Study
Schmeiser, F.; Krohmer, E.; Schell, N.; Uhlmann, E.; Reimers, W.
Journal Article
2021Lessons learned in intellectual capital management in Germany between 2000 and 2020 - History, applications, outlook
Bornemann, M.; Alwert, K.; Will, M.
Journal Article
2021Methodology to develop Digital Twins for energy efficient customizable IoT-Products
Riedelsheimer, T.; Gogineni, S.; Stark, R.
Journal Article
2021Modularized and Reconfigurable Machine Tool Frames based on Polyhedral Building Blocks
Peukert, Bernd Walter
: Uhlmann, Eckart
Dissertation
2021Patterns for Resilient Value Creation: Perspective of the German Electrical Industry during the COVID-19 Pandemic
Neumann, K.; Erp, T. Van; Steinhöfel, E.; Sieckmann, F.; Kohl, H.
Journal Article
2021Production in the loop - the interoperability of digital twins of the product and the production system
Vogt, A.; Schmidt, P.H.; Mayer, S.; Stark, R.
Journal Article
2021Progress for Life Cycle Sustainability Assessment by Means of Digital Lifecycle Twins - A Taxonomy
Riedelsheimer, T.; Neugebauer, S.; Lindow, K.
Book Article
2021Quantitative and qualitative comparison of morphometric outcomes after endoscopic and conventional correction of sagittal and metopic craniosynostosis versus control groups
Schulz, M.; Liebe-Püschel, L.; Seelbach, K.; Paulikat, L.; Fehlhaber, F.; Schwarz, K.; Blecher, C.; Thomale, U.-W.
Journal Article
2021Relative density prognosis for directed energy deposition with the help of artificial neural networks
Marko, A.; Schafner, A.; Raute, J.; Rethmeier, M.
Journal Article
2021Requirements-driven Identification and Validation of Reusable System and Development Elements
Sünnetcioglu, Atakan
Dissertation
2021Selbstoptimierendes System zur aktiven Schwingungskompensation in Werkzeugmaschinen
Mewis, Jan
Dissertation
2021Selection of diamond coated silicon nitrides for use as ceramic end mills when machining glass and carbon fiber reinforced plastics
Stawiszynski, B.; Protz, F.; Uhlmann, E.
Journal Article
2021Shielded metal arc welding of 9%Ni steel using matching ferritic filler metal
El-Batahgy, A.; Saiyah, A.; Khafagi, S.; Gumenyuk, A.; Gook, S.; Rethmeier, M.
Journal Article
2021Systematic Literature Review of System Models for Technical System Development
Schmidt, M.M.; Zimmermann, T.C.; Stark, R.
Review
2021Titanium Ti-6Al-4V alloy milling by applying industrial robots
Grisol de Melo, E.; Mohnke, C.; Polte, J.; Oliveira Gomes, J. de; Uhlmann, E.
Journal Article
2021Validation of Immersive Design Parameters in Driving Simulation Environments
Lyga, Y.; Lau, M.; Brandenburg, E.; Stark, R.
Conference Paper
20204th Industrial Revolution Design through Lean Foundation
Davis, N.; Companiwala, A.; Muschard, B.; Petrusch, N.
Journal Article
2020Analyzing the role of research and technology organizations (RTOs) in national innovation systems (NIS)
Hecklau, F.; Kidschun, F.; Kohl, H.; Tominaj, S.
Conference Paper
2020Application of additive manufactured tungsten carbide-cobalt electrodes with interior flushing channels in S-EDM
Uhlmann, E.; Polte, J.; Bolz, R.; Yabroudi, S.; Streckenbach, J.; Bergmann, A.
Journal Article
2020Applying Contextualization for Data-Driven Transformation in Manufacturing
Gogineni, S.; Lindow, K.; Nickel, J.; Stark, R.
Conference Paper
2020Assembly Issue Resolution System Using Machine Learning in Aero Engine Manufacturing
Brünnhäußer, J.; Gogineni, S.; Nickel, J.; Witte, H.; Stark, R.
Conference Paper
2020Assistenzsystem für die Entwicklung nachhaltiger Produkte
Buchert, Tom
: Kohl, H.; Stark, Rainer; Anderl, R.
Dissertation
2020Augmented learning for industrial education
Menn, J.P.; Severengiz, M.; Lorenz, A.K.; Wassermann, J.; Ulbrich, C.; Krüger, J.; Seliger, G.
Journal Article
2020Ausblick
Rimmelspacher, Sven O.; Kayser, Marco; Batzer, Jan; Gering, Patrick
Book Article
2020Automated continuous learn and improvement process of energy efficiency in manufacturing
Can, A.; Fisch, J.; Stephan, P.; Thiele, G.; Krüger, J.
Conference Paper
2020Automated Optical Inspection Using Anomaly Detection and Unsupervised Defect Clustering
Lehr, J.; Sargsyan, A.; Pape, M.; Philipps, J.; Krüger, J.
Conference Paper
2020Automated Tool‐Path Generation for Rapid Manufacturing of Additive Manufacturing Directed Energy Deposition Geometries
Biegler, Max; Wang, Jiahan; Kaiser, Lukas; Rethmeier, Michael
Journal Article
2020Avoidance of end crater imperfections at high-power laser beam welding of closed circumferential welds
Gook, Sergej; Üstündag, Ömer; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2020Avoidance of liquid metal embrittlement during resistance spot welding by heat input dependent hold time adaption
Böhne, C.; Meschut, G.; Biegler, M.; Rethmeier, M.
Journal Article
2020Building up a national network of applied R&D institutes in an emerging innovation system
Kohl, H.; Will, M.; Prim, M.F.; Pavim, A.X.
Journal Article
2020Characteristics and Skills of Leadership in the Context of Industry 4.0
Guzmán, V.E.; Muschard, B.; Gerolamo, M.; Kohl, H.; Rozenfeld, H.
Journal Article
2020Combine the best of two worlds. Experience in setting up the Sino-German Intelligent Manufacturing Research Institute (SGIMRI) in Nanjing
Knothe, Thomas
Presentation
2020A comparative analysis of ceramic and cemented carbide end mills
Dröder, K.; Karpuschewski, B.; Uhlmann, E.; Arrabiyeh, P.A.; Berger, D.; Busemann, S.; Hartig, J.; Madanchi, N.; Mahlfeld, G.; Sommerfeld, C.
Journal Article
2020Conceptualization of a Measurement Procedure for Determination of Characteristic Properties of SLM Produced Parts by Means of Computed Tomography
Uhlmann, E.; Saber, Y.
Journal Article
2020Condition monitoring concept for industrial Robots
Uhlmann, E.; Polte, J.; Geisert, C.
Conference Paper
2020Constant surface roughness over tool-lifetime due to online process monitoring and cutting parameter adaption in turning of gear steel
Uhlmann, E.; Holznagel, T.; Berardi, P.
Journal Article
2020Decentralised identification of used exchange parts with a mobile application
Lehr, J.; Schlüter, M.; Krüger, J.
Journal Article
2020Definition von Schwingungsparametern und Ermittlung der Auswirkungen bei der Bearbeitung
Uhlmann, E.; Zimmermann, S.; Thalau, J.
Journal Article
2020DEM-simulation of particle behaviour during cutting edge preparation of micro-milling tools by immersed tumbling
Uhlmann, E.; Polte, M.; Polte, J.; Kuche, Y.
Conference Paper
2020Demand-oriented barriers and potentials for remanufacturing in Vietnam
Guidat, T.; Wewer, A.; Kohl, H.; Seliger, G.
Journal Article
2020Design alternatives for internationally distributed learning factories in global production engineering
Schumacher, B.C.; Steinbach, A.; Vi, N.H.; Yükseltürk, A.; Kohl, H.; Krüger, J.; Quoc, H.N.
Journal Article
2020Design and hard machining of a high performance ceramic impeller
Uhlmann, E.; Polte, J.; Koprowski, S.; Kochan, J.; Borsoi Klein, T.
Conference Paper
2020Determining the shape of reflectance reference samples for curved surface reflectors
Lanevski, D.; Manoocheri, F.; Vaskuri, A.; Hameury, J.; Kersting, R.; Monte, C.; Adibekyan, A.; Kononogova, E.; Ikonen, E.
Journal Article
2020Deutsche Normungsroadmap Künstliche Intelligenz
Adler, R.; Kolomiichuk, Sergii; Hecker, Dirk; Lämmel, Philipp; Ma, Jackie; Marko, Angelina; Mock, Michael; Nagel, Tobias; Poretschkin, Maximilian; Rennoch, Axel; Röhler, Marcus; Ruf, Miriam; Schönhof, Raoul; Schneider, Martin A.; Tcholtchev, Nikolay; Ziehn, Jens; Böttinger, Konstantin; Jedlitschka, Andreas; Oala, Luis; Sperl, Philip; Wenzel, Markus; et. al.
: Wahlster, W.; Winterhalter, C.
Study
2020Development of a machining strategy for diamond slide burnishing burnishing tools made of polycrystalline diamond (PCD)
Uhlmann, E.; Polte, M.; Polte, J.; Kuche, Y.; Wendorf, S.; Siebel, D.
Conference Paper
2020Development of an Industrial Internet of Things Ontologies System
Fedotova, A.V.; Lindow, K.; Norbach, A.
Conference Paper
2020Development of monolithic ceramic milling tools for machining graphite
Uhlmann, E.; Polte, M.; Polte, J.; Kuche, Y.; Hocke, T.
Conference Paper
2020Development of Tool Paths for Multi-axis Single Stage Incremental Hole-flanging
Besong, L.I.; Buhl, J.; Ünsal, I.; Bambach, M.; Polte, M.; Blumberg, J.; Uhlmann, E.
Journal Article
2020Digital Twin Readiness Assessment
Riedelsheimer, Theresa; Lünnemann, Pascal; Wehking, Sebastian; Dorfhuber, Lisa
: Samarajiwa, Markus (Hrsg.); Lindow, Kai (Hrsg.); Salamon, David (Hrsg.); Stark, Rainer (Hrsg.)
Study
2020Digitalisation toolkit for SMEs
Gering, P.
Conference Paper
2020Die Digitalisierungshürde lässt sich Meister(n)
: Knothe, Thomas (Hrsg.); Gering, Patrick (Hrsg.); Rimmelspacher, Sven O. (Hrsg.); Maier, Michael (Hrsg.)
Scientific Anthology
2020Distortion-based validation of the heat treatment simulation of Directed Energy Deposition additive manufactured parts
El-Sari, B.; Biegler, M.; Graf, B.; Rethmeier, M.
Journal Article
2020Dry-ED milling of micro-scale contours with high-speed rotating tungsten tube electrodes
Uhlmann, E.; Perfilov, I.; Yabroudi, S.; Mevert, R.; Polte, M.
Journal Article
2020Dynamisches Werkzeugverhalten beim Bürstspanen mit gebundenem Schleifmittel
Hoyer, A.; Uhlmann, E.
Journal Article
2020Effectivity of Learning Factories to convey problem solving competencies
Sieckmann, F.; Petrusch, N.; Kohl, H.
Journal Article
2020Efficient abrasive water jet milling for near-net-shape fabrication of difficult-to-cut materials
Uhlmann, E.; Männel, C.; Braun, T.
Journal Article
2020Einflussgrößen des Schärfens beim Doppelseitenplanschleifen mit Planentenkinematik
Lichtschlag, L.; Uhlmann, E.
Journal Article
2020Einordnung
Hirsch-Kreinsen, Hartmut; Schumann, Monique; Scholz, Julia-Anne; Batzer, Jan; Gering, Patrick
Book Article
2020Einsatzverhalten keramischer Fräswerkzeuge bei der Zerspanung von glas- und kohlenstofffaserverstärkten Kunststoffen
Stawiszynski, Bartek
: Kohl, Holger; Uhlmann, Eckart; Biermann, Dirk
Dissertation
2020Electrical discharge dressing of honing stones
Uhlmann, E.; Yabroudi, S.; Zimmermann, S.; Gerlitzky, G.; Polte, M.; Klink, U.; Sihling, B.
Journal Article
2020Energy optimal set-points for coupled systems using their topology
Thiele, G.; Claus, R.; Johanni, T.; Krüger, J.
Conference Paper
2020An Ensemble Learning based Hierarchical Multi-label Classification Approach to Identify Impacts of Engineering Changes
Pan, Y.; Stark, R.
Conference Paper
2020Ensure OPC-UA interfaces for digital plug-and-produce
Jaekel, F.-W.; Wolff, T.; Happersberger, V.; Knothe, T.
Conference Paper
2020Entwicklung des hybriden Auftragschweißens als leistungsfähigen Beschichtungsprozess für Korrosions und Verschleißschutzschichten
Brunner-Schwer, Christian; Graf, Benjamin; Rethmeier, Michael
Journal Article
2020Entwicklung eines Assistenzsystems zur Konfiguration und Implementierung von GPS. GPS-Einführung in KMU der Pharmaindustrie
Sieckmann, F.; Kohl, H.
Journal Article
2020Evaluation Model for Mobility Design of Learning Factories
Petrusch, N.; Schliephack, W.; Kohl, H.
Journal Article
2020Experimental and numerical study on the influence of the laser hybrid parameters in partial penetration welding on the solidification cracking in the weld root
Bakir, N.; Üstündağ, Ö.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2020Experimental observation of stress formation during selective laser melting using in situ X-ray diffraction
Schmeiser, F.; Krohmer, E.; Schell, N.; Uhlmann, E.; Reimers, W.
Journal Article
2020Firma Klappdekelen - die Digitalisierungshürde lässt sich "Meister(n)"
Schumann, Monique
Book Article
2020Firma Klappdekelen - ein Jahr später
Schumann, Monique
Book Article
2020Fundamental research of applying tungsten carbide-cobalt as tool electrode material for sinking EDM
Uhlmann, E.; Polte, M.; Bolz, R.; Börnstein, J.
Journal Article
2020Geometric distortion-compensation via transient numerical simulation for directed energy deposition additive manufacturing
Biegler, M.; Elsner, B.A.M.; Graf, B.; Rethmeier, M.
Journal Article
2020Handlungsempfehlungen
Schneider, Benjamin; Kayser, Marco; Gelec, Erdem; Schweizer, Hartmut; Knothe, Thomas
Book Article
2020Haptic Interaction in Virtual Reality Environments for Manual Assembly Validation
Kind, S.; Geiger, A.; Kießling, N.; Schmitz, M.; Stark, R.
Journal Article
2020Humanzentrierte selbstorganisierende Produktion durch kontextsensitive Assistenz
Uhlmann, E.; Polte, J.; Beleke, A.; Mühlich, C.; Paeleke, L.; Epping, M.
Journal Article
2020Hybrid laser arc welding of thick high-strength pipeline steels of grade X120 with adapted heat input
Üstündag, Ömer; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2020Hybrid laser-arc welding of thick-walled pipe segments with optimization of the end crater
Üstündag, Ömer; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2020Hybrid-Prototype-in-the-Loop zum frühzeitigen Test der Beherrschbarkeit von Fahrerassistenzsystemen
Buchholz, Christian
: Göhlich, D.; Stark, Rainer; Vietor, T.
Dissertation
2020Impact of Platform Openness on Ecosystems and Value Streams in Platform-Based PSS Exemplified Using RAMI 4.0
Zambetti, M.; Blüher, T.; Pezzotta, G.; Exner, K.; Pinto, R.; Stark, R.
Conference Paper
2020Implementation with agile project management approaches: Case study of an industrie 4.0 learning factory in China
Scholz, J.-A.; Sieckmann, F.; Kohl, H.
Journal Article
2020In situ determination of the critical straining condition for solidification cracking during laser beam welding
Bakir, N.; Gumenyuk, A.; Pavlov, V.; Volvenko, S.; Rethmeier, M.
Journal Article
2020Increased efficiency and accuracy in ultra-precision machining through adapted CAM software
Uhlmann, E.; Polte, J.; Hein, C.; Kuche, Y.; Dörr, M.
Conference Paper
2020Increasing challenges for sustainability for manufacturing industry based on global, national and technological initiatives
Kohl, H.; Schliephack, W.; Muschard, B.
Journal Article
2020Industrial Robot Programming Methods: A Scoping Review
Heimann, O.; Guhl, J.
Conference Paper
2020Influence of electron beam welding parameters on the weld seam geometry of Inconel 718 at low feed rates
Raute, Julius; Jokisch, Torsten; Marko, Angelina; Biegler, Max; Rethmeier, Michael
Journal Article
2020Influence of the fatty acid profile on the lubricating film formation in micro-milling process on 7050-T7451 aluminum alloy
Chanes de Souza, M.; Wiesner, H.M.; Kuche, Y.; Polte, J.; Oliveira Gomes, J. de; Uhlmann, E.
Journal Article
2020Integrated enterprise modelling to achieve interoperability
Jaekel, F.-W.
Conference Paper
2020Integrated strategy development based on intangibles
Will, M.
Book Article
2020Integration von ISO 9001:2015 und Ganzheitlichen Produktionssystemen
Kohl, Holger; Neumann, Konstantin
Journal Article
2020Intuitive Werkzeuge für ein durchgehendes Engineering. Technologieintegrierte Fabrikplanung für KMU
Glodde, Ilona; Scholz, Hannes; Knothe, Thomas; Kohl, Holger
Journal Article
2020Investigation of micromilled tool steel H13 using tungsten carbide micro-end mills
Manso, C.S.; Thom, S.; Uhlmann, E.; Assis, C.L.F. de; Conte, E.G. del
Journal Article
2020Investigation of the application of a C-ring geometry to validate the stress relief heat treatment simulation of additive manufactured austenitic stainless steel parts via displacement
El-Sari, B.; Biegler, M.; Rethmeier, M.
Journal Article
2020Investigation of the Metallurgical and Thermo-Mechanical Factors Influencing Centreline Solidification Cracking by Laser Beam and Hybrid Welding
Quiroz Penaranda, Vanessa
Dissertation
2020IoT-T
Rennoch, Axel; Jäkel, Frank-Walter; Hackel, Sascha; Stomber, Jens; Stölzle, Stefan; Wardaschka, Andre; Kaiser, Alexander
Report
2020Issues in distributed Engineering of SMEs over the Collaboration Life Cycle
Blüher, T.; Randermann, M.; Rosa, M.; Stark, R.; Jochem, R.
Journal Article
2020JUMP Planner
Rimmelspacher, Sven O.; Gering, Patrick; Lemcke, Anne; Schneider, Benjamin
Book Article
2020A laser powder bed fusion system for in situ x-ray diffraction with high-energy synchrotron radiation
Uhlmann, E.; Krohmer, E.; Schmeiser, F.; Schell, N.; Reimers, W.
Journal Article
2020Laser surface hardening of engine camshaft cams
Lasota, I.; Protsenko, V.; Matyushkin, A.; Kuznetsov, M.; Gook, S.
Journal Article
2020Laser welding of Inconel 718 nickel-based alloy layer-by-layer products
Voropaev, Alexander; Stramko, Maxim; Sorokin, Alexander; Logachev, Ivan; Kuznetsov, Mikhail; Gook, Sergej
Journal Article
2020Laser-Plasma-Auftragschweißen als hybrides Beschichtungsverfahren für hohe Auftragsraten mit geringer thermischer Belastung. Abschlussbericht
Brunner-Schwer, Christian
Report
2020Learning Environment for Introduction in Discrete-Event Simulation for Design and Improvement of New and Existing Material Flow Systems
Schumacher, B.C.; Kohl, H.
Conference Paper
2020Learning factory for digitization of enterprises
Rieckmann, J.M.; Knothe, T.
Conference Paper
2020Literature review of quality attributes for collaborative product development
Randermann, M.; Blüher, T.; Jochem, R.; Stark, R.
Journal Article
2020LiViTo: Linguistic and visual features tool for assisted analysis of historic manuscripts
Müller, K.; Tikhonov, A.; Meyer, R.
Conference Paper
2020LMD coatings as filler material for laser beam welded 30 mm thick plates
Straße, A.; Üstündag, Ö.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2020Low-Cost Embedded Vision for Industrial Robots: A Modular End-of-Arm Concept
Kroeger, Ole; Wollschläger, Felix; Krüger, Jörg
Conference Paper
2020Management von Innovationsnetzwerken unter Fokussierung von Kollaboration
Cap, Jan-Patrick
: Kohl, Holger
Dissertation
2020Maturity Assessment in Industry 4.0 - A Comparative Analysis of Brazilian and German Companies
Moura, L.R.; Kohl, H.
Journal Article
2020Mechanical Properties Characterization of Welded Automotive Steels
Javaheri, E.; Lubritz, J.; Graf, B.; Rethmeier, M.
Journal Article
2020Model-Based Systems Engineering (MBSE) as computer-supported approach for cooperative systems development
Schmidt, Marvin M.; Stark, Rainer
Conference Paper
2020Modellierung mit MO²GO und Erzeugung eines IEC-konformen Datenoutputs
Schweizer, Hartmut; Gering, Patrick
Book Article
2020Modelling of a thermoelectric self-cooling system based on thermal resistance networks for linear direct drives in machine tools
Uhlmann, E.; Salein, S.; Polte, M.; Triebel, F.
Journal Article
2020Modular virtual reality to enable efficient user studies for autonomous driving
Konkol, K.; Brandenburg, E.; Stark, R.
Conference Paper
2020Natural Virtual Reality User Interface to Define Assembly Sequences for Digital Human Models
Geiger, A.; Brandenburg, E.; Stark, R.
Journal Article
2020Networked Visual Servoing as Use-Case for Cloud-based Industrial Robot Control
Vick, A.; Krause, C.; Krüger, J.
Conference Paper
2020Neueste Entwicklungen im Bereich des Hochleistungslaserstrahl- und Hybridschweißens von hohen Blechdicken
Üstündag, Ömer; Bakir, Nasim; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2020Notch impact toughness of laser beam welded thick sheets of cryogenic nickel alloyed steel X8Ni9
Gook, S.; Krieger, S.; Gumenyuk, A.; El-Batahgy, A.M.; Rethmeier, M.
Journal Article
2020Numerical study of additional element transport in wire feed laser beam welding
Meng, X.; Artinov, A.; Bachmann, M.; Rethmeier, M.
Journal Article
2020Numerische Simulation im 3D-Druck. Simulationsgestützte Verzugskompensation reduziert den Nachbearbeitungsaufwand und vermeidet Bauabbrüche im DED Additive Manufacturing
Biegler, Max; Rethmeier, Michael
Journal Article
2020On the relationship between the bulge effect and the hot cracking formation during deep penetration laser beam welding
Artinov, A.; Bachmann, M.; Meng, X.; Karkhin, V.; Rethmeier, M.
Journal Article
2020Online process control and self-configuration of turning operations
Uhlmann, E.; Holznagel, T.; Alavi, R.M.
Journal Article
2020OPC-UA based IIoT and CPS interoperability validation
Jaekel, F.-W.
Conference Paper
2020OPEN.Effect. Effectiveness of open-source hardware in times of a pandemic
Gogineni, Sonika; Tanrikulu, Cansu; Konietzko, Erik Paul; Lindow, Kai; Read, Robert L.
Study
2020An optimal algorithm for the robotic assembly system design problem: An industrial case study
Hagemann, S.; Stark, R.
Journal Article
2020Optimising the grinding wheel design for flute grinding processes utilising numerical analysis of the complex contact conditions
Uhlmann, E.; Gülzow, B.; Muthulingam, A.
Journal Article
2020Optimization with the evolution strategy by example of electrical-discharge drilling
Streckenbach, J.; Koref, I.S.; Rechenberg, I.; Uhlmann, E.
Journal Article
2020Organizational planning for quality management in the digital age
Behmer, F.J.; Jochem, R.
Journal Article
2020Oxidized tool electrodes for optimized electro-discharge drilling
Uhlmann, E.; Polte, M.; Streckenbach, J.; Dinh, N.C.; Börnstein, J.; Wolf, C.-S.; Camin, B.
Conference Paper
2020Potentials and challenges of Smart Products and related business models
Wang, W.M.; Lünnemann, P.; Klemichen, A.; Blüher, T.; Stark, R.
Conference Paper
2020Preclinical In Vitro Assessment of Submicron-Scale Laser Surface Texturing on Ti6Al4V
Schweitzer, L.; Cunha, A.; Pereira, T.; Mika, K.; Rego, A.M.B. Do; Ferraria, A.M.; Kieburg, H.; Geissler, S.; Uhlmann, E.; Schoon, J.
Journal Article
2020Prevention of liquid metal embrittlement cracks in resistance spot welds by adaption of electrode geometry
Böhne, Christoph; Meschut, Gerson; Biegler, Max; Frei, Julian; Rethmeier, Michael
Journal Article
2020Process behaviour of micro-textured CVD diamond thick film cutting tools during turning of Ti-6Al-4V
Uhlmann, E.; Schröter, D.
Journal Article
2020Process data based Anomaly detection in distributed energy generation using Neural Networks
Klein, M.; Thiele, G.; Fono, A.; Khorsandi, N.; Schade, D.; Krüger, J.
Conference Paper
2020Prozessmanagement für KMU
Oertwig, Nicole; Gering, Patrick; Knothe, Thomas
Book Article
2020Prozessüberwachung durch Objekterkennung - Automatisierte Werkzeugverschleißmessung beim robotergeführten Gleitschleifen
Kopp, M.; Uhlmann, E.
Journal Article
2020Qualification of computational welding mechanics approaches for simulation of directed energy deposition
Biegler, Max Robert
: Rethmeier, Michael
Dissertation
2020Quantifying mechanical properties of automotive steels with deep learning based computer vision algorithms
Javaheri, E.; Kumala, V.; Javaheri, A.; Rawassizadeh, R.; Lubritz, J.; Graf, B.; Rethmeier, M.
Journal Article
2020Reduktion thermisch bedingter Verlagerungen durch Integration von Peltierelementen in eine Hochfrequenzmotorspindel
Uhlmann, E.; Salein, S.; Iden, N.; Polte, J.; Temme, P.; Hartung, D.; Perschewski, S.
Journal Article
2020Reproduzierbare Optimierung des funkenerosiven Bohrens
Uhlmann, E.; Polte, M.; Streckenbach, J.; Osmanovic, M.; Börnstein, J.
Journal Article
2020Research on new energy automobile manufacturing service derivatization based on TRIZ
Wan, H.; Rieckmann, J.M.; Zhang, Q.; Ping, Q.
Journal Article
2020Roboterprogrammierung vereinfachen
Guhl, J.; Heimann, O.; Krüger, J.
Journal Article
2020Robust system identification for hysteresis-controlled devices using SINDy
Schreck, G.; Thiele, G.; Fey, A.; Krüger, J.
Conference Paper
2020Safe high impedance control of a series-elastic actuator with a disturbance observer
Haninger, K.; Asignacion, A.; Oh, S.
Conference Paper
2020Schnell erholen dank Resilienz im Unternehmen
Knothe, Thomas; Scholz, Julia-Anne; Oertwig, Nicole; Petrusch, Natalie
Journal Article
2020Serious Game on Factory Planning for Higher Education
Severengiz, M.; Seliger, G.; Krüger, J.
Journal Article
2020Smart hybrid prototyping in manual automotive assembly validation
Wolf, B.; Kind, S.; Stark, R.
Journal Article
2020Sortierung von Objekten in mikrofluidischen Systemen auf Basis von piezogetriebenen Aktoren
Horbert, Peter Paul
: Meyer, H.J.; Uhlmann, E.; Henkel, T.
Dissertation
2020Standardisation of Practices in Open Source Hardware
Bonvoisin, Jérémy; Molloy, Jenny; Häuer, Martin; Wenzel, Tobias
Journal Article
2020Stufenmodell zur Strukturierung digitaler Assistenzfunktionen: Digital assistierte Montageplanung
Bußwinkel, L.; Hauk, J.-C.; Schneider, H.; Stark, R.
Journal Article
2020Surface Finishing of Zirconium Dioxide with Abrasive Brushing Tools
Uhlmann, E.; Hoyer, A.
Journal Article
2020Sustainable Corporate Development: A Resource-Oriented Approach
Orth, Ronald; Kohl, Holger; Galeitzke, Mila
Book Article
2020Sustainable engineering master module - insights from three cohorts of European engineering team
Gladysz, B.; Urgo, M.; Stock, T.; Haskins, C.; Sieckmann, F.; Jarzebowska, E.; Kohl, H.; Strandhagen, J.O.; Tollio, T.
Journal Article
2020System identification of a hysteresis-controlled pump system using SINDy
Thiele, G.; Fey, A.; Sommer, D.; Krüger, J.
Conference Paper
2020Systematic literature review-Effects of PSS on sustainability based on use case assessments
Blüher, T.; Riedelsheimer, T.; Gogineni, S.; Klemichen, A.; Stark, R.
Journal Article
2020Tool wear prevention in ultra-precision polymer machining
Uhlmann, E.; Fang, F.; Polte, J.; Hein, C.; Lai, M.; Dörr, M.; Jahnke, C.
Conference Paper
2020Towards a Reference Model for Knowledge Driven Data Provision Processes
Wang, W.M.; Preidel, M.; Fachbach, B.; Stark, R.
Conference Paper
2020Towards an AI-Enhanced Circular Economy. AI-enhanced identification, inspection and sorting for reverse logistics
Schlüter, Marian
Presentation
2020Towards Deep Learning in Industrial Applications Taking Advantage of Service-Oriented Architectures
Briese, C.; Schlüter, M.; Lehr, J.; Maurer, K.; Krüger, J.
Journal Article
2020Trochoid milling with industrial robots
Uhlmann, E.; Reinkober, S.; Hoffmann, M.; Käpernick, P.
Journal Article
2020Untersuchung zum Elektronenstrahlschweißen heißrissgefährdeter Nickelbasis-Superlegierungen mittels statistischer Versuchsplanung
Raute, Julius; Jokisch, Torsten; Marko, Angelina; Rethmeier, Michael
Conference Paper
2020UrbanTSN - Automatisierung mit Echtzeit-Internet
Chemnitz, Moritz; Wolff, Tobias; Vick, Axel
Journal Article
2020Ursachenanalyse zur Verfügbarkeitssteigerung von Werkzeugmaschinen
Uhlmann, E.; Dumitrescu, R.; Polte, J.; Meyer, M.; Simsek, D.
Journal Article
2020User centered development of a digital twin concept with focus on sustainability in the clothing industry
Riedelsheimer, T.; Dorfhuber, L.; Stark, R.
Journal Article
2020Veränderte Kompetenzanforderungen im Rahmen von Digitalisierung und Industrie 4.0
Hecklau, F.; Orth, R.; Kidschun, F.; Tominaj, S.
Conference Paper
2020Verfahren zum fehlerfreien Laserstrahl-Hybridschweißen von geschlossenen Rundnähten
Gook, Sergej; Üstündag, Ömer; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2020Verfügbarkeitssteigerung durch gezielte Datenanalyse
Uhlmann, E.
Journal Article
2020Wear evaluation of CVD diamond coated high-performance drilling tools for machining of carbon fiber reinforced plastics (CFRP)
Uhlmann, E.; Reimers, W.; Hinzmann, D.; Christiansen, G.; Böttcher, K.
Journal Article
2020Wiederverwendung von Funktionsgruppen im Unikatbau
Zimmermann, Thomas C.; Schmidt, Marvin M.
Journal Article
2019 Elektromechanisches Glattwalzen von Stahllegierungen
Uhlmann, E.; Thom, S.; Prasol, L.; Haberbosch, K.; Drieux, S.
Journal Article
20193-Achs-Portalfräsmaschine als Demonstrator für ein modulares Werkzeugmaschinengestell
Uhlmann, E.; Polte, M.; Blumberg, J.; Peukert, B.
Journal Article
20194G/5G-Campusnetze und FTS-Einsatz
Chemnitz, Moritz; Vick, Axel; Lambrecht, Jens
Journal Article
2019Agent-based simulation for production planning and control in consideration of disruption events
Bui, M.D.; Nguyen, Q.H.; Kohl, H.
Conference Paper
2019Anforderungsaufnahme an IoT Tests für CoAP, MQTT und OPC‐UA
Jäkel, Frank-Walter; Wolff, Tobias; Alexander Kaiser; Hackel, Sascha; Rennoch, Axel; Wardaschka, Andre
Report
2019Application example: Assessment of the technological maturity of Brazilian innovation institutes
Hecklau, F.; Kidschun, F.; Will, M.; Kohl, H.; Prim, M.F.; Pavim, A.X.; Oliveira, J.E.
Conference Paper
2019Application of industrial methods in engineering education
Kind, S.; Dybov, A.; Buchholz, C.; Stark, R.
Conference Paper
2019Application of laser surface nanotexturing for the reduction of peri-implantitis on biomedical grade 5 Ti-6Al-4V dental abutments
Uhlmann, E.; Schweitzer, L.; Cunha, A.; Polte, J.; Huth-Herms, K.; Kieburg, H.; Hesse, B.
Conference Paper
2019Application of niobium carbide based cutting materials for peripheral milling of CFRP
Uhlmann, E.; Meier, P.; Hinzmann, D.
Journal Article
2019Approaching Knowledge Dynamics Across the Product Development Process with Methods of Social Research
Wang, W.M.; Mörike, F.; Hergesell, J.; Baur, N.; Feufel, M.; Stark, R.
Journal Article
2019Assessment of thermal cycles by combining thermo-fluid dynamics and heat conduction in keyhole mode welding processes
Artinov, A.; Karkhin, V.; Khomich, P.; Bachmann, M.; Rethmeier, M.
Journal Article
2019Automated tool-path generation for rapid manufacturing and numerical simulation of additive manufacturing LMD geometries
Biegler, Max; Wang, Jiahan; Graf, Benjamin; Rethmeier, Michael
Conference Paper
2019An automatic calibration approach for a multi-camera-robot system
Kroeger, Ole; Hügle, Johannes; Niebuhr, Carsten A.
Conference Paper
2019Automatically welded tubular X-joiuts
Schaumann, P.; Schürmann, K.; Pirtner, A.; Rethmeier, M.
Conference Paper
2019Automatized 3D-scanning application for the virtualization of large components
Mönchinger, Stephan; Schmidt, Marvin M.; Dreßen, Sebastian; Wissmann, Patrick; Stark, Rainer
Conference Paper
2019Avoidance of End Crater Imperfections at High-Power Laser Beam Welding of Closed Circumferential Welds
Gook, Sergej; Üstündag, Ömer; Gumenyuk, Andrey; Rethmeier, Michael
Presentation
2019Belt grinding of cast iron without cooling lubricant
Uhlmann, E.; Buelter, M.
Journal Article
2019Best Practice Example 12. LEAN-Factory for a pharmaceutical Company in Berlin, Germany
Kohl, Holger; Jochem, Roland; Sieckmann, Felix; Rybski, Christoffer
Book Article
2019Bounded Collision Force by the Sobolev Norm: Compliance and Control for Interactive Robots
Haninger, Kevin; Surdilovic, Dragoljub
Conference Paper
2019Classification of Similar Objects of Different Sizes Using a Reference Object by Means of Convolutional Neural Networks
Lehr, Jan; Schlüter, Marian; Krüger, Jörg
Conference Paper
2019Cognitive Edge for Factory
Lambrecht, Jens; Steffens, Ernst Joachim; Geitz, Marc; Vick, Axel; Funk, Eugen; Steigerwald, Wolfgang
Conference Paper
2019Combining the Advantages of On- and Offline Industrial Robot Programming
Guhl, Jan; Nikoleizig, Sylvio; Heimann, Oliver; Hügle, Johannes; Krüger, Jörg
Conference Paper
2019Configuration Equilibrium Model of Product Variant Design Driven by Customer Requirements
Yang, Q.; Bian, X.; Stark, R.; Fresemann, C.; Song, F.
Journal Article
2019Cucumber detection for precision agriculture applications
Fernandez, R.; Aliende, V.; Gonzalez-De-Santos, P.; Armada, M.; Surdilovic, J.; Surdilovic, D.
Conference Paper
2019Cutting force prediction in micro-milling considering the cutting edge micro-geometry
Uhlmann, E.; Polte, J.; Wiesner, H.M.; Kuche, Y.; Polte, M.
Conference Paper
2019CVD-Diamantwerkzeuge mit SiC-Zwischenschicht
Uhlmann, E.; Barth, E.; Gäbler, J.; Höfer, M.
Journal Article
2019Data preparation for data analytics (DPDA)
Stark, Rainer; Deuse, Jochen; Damerau, Thomas; Reckelkamm, Thorsten; Lindow, Kai
Journal Article
2019Data Preparation for Data Analytics (DPDA)
Reckelkamm, Thorsten; Damerau, Thomas
Journal Article
2019Datengetriebene Anwendungserstellung
Fraas, Philipp; Thierse, Paul; Chemnitz, Moritz
Book Article
2019Datenvorbereitung für KI - Herausforderungen und Lösungen
Damerau, Thomas
Conference Paper
2019Deep learning for part identification based on inherent features
Krüger, Jörg; Lehr, Jan; Schlüter, Marian; Bischoff, Nils
Journal Article
2019Development and operation of Digital Twins for technical systems and services
Stark, Rainer; Fresemann, Carina; Lindow, Kai
Journal Article
2019Development capabilities for smart products
Tomiyama, T.; Lutters, E.; Stark, R.; Abramovici, M.
Journal Article
2019Development of a Fire Detection Based on the Analysis of Video Data by Means of Convolutional Neural Networks
Lehr, Jan; Gerson, Christian; Ajami, Mohamad; Krüger, Jörg
Conference Paper
2019Development of a novel optical measurement technique to investigate the hot cracking susceptibility during laser beam welding
Bakir, N.; Pavlov, V.; Zavjalov, S.; Volvenko, S.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2019Development of an organizational structure model as a basis for the assessment of the digital transformation of organizations
Kidschun, F.; Hecklau, F.; Orth, R.; Wackernagel, J.P.; Singer, K.
Conference Paper
2019Die-sinking EDM of a SiC-boride-composite
Uhlmann, E.; Polte, J.; Jahnke, C.; Wolf, C.-S.; Degenhardt, U.
Conference Paper
2019Digital integrierte Produktion. Lösungen aus Berlin / Brandenburg. Vorträge / Proceedings PTK 2019
: Uhlmann, Eckart (Hrsg.)
Conference Proceedings
2019Digital Twin
Stark, Rainer; Damerau, Thomas
Book Article
2019Digitaler Zwilling für Smart Services
Exner, Konrad; Preidel, Maurice; Gogineni, Sonika; Stark, Rainer
Journal Article
2019Drei Zukunftsszenarien. Additive Fertigung im Jahr 2025 in Deutschland
Riemer, Annamaria; Döbel, Inga; Welz, Juliane; Knitsch, Valentin; Bergmann, André; Giebitz, Danny; Schüll, Elmar
Book
2019Ecological and functional optimization of the pretreatment process for plasma based coatings of cutting tools
Uhlmann, E.; Riemer, H.; An, S.; Fröhlich, M.; Paschke, H.; Petersen, M.
Journal Article
2019Einfluss der Schärfparameter auf die Schleifscheibentopographie
Uhlmann, E.; Muthulingam, A.
Journal Article
2019Einsatzverhalten von CVD-Diamantdünnschichtwerkzeugen
Uhlmann, E.; Hinzmann, D.
Journal Article
2019Energieeffizienz in der intelligenten Fabrik
Thiele, Gregor; Grabowski, K.; Krüger, J.
Journal Article
2019Energy Efficiency Optimization using AutomationML modeling and an EnPI methodology
Thiele, Gregor; Khorsandi, Niloufar; Krüger, Jörg
Conference Paper
2019Enterprise Interoperability VIII: Smart Services and Business Impact of Enterprise Interoperability
: Popplewell, Keith; Thoben, Klaus-Dieter; Knothe, Thomas; Poler, R.
Conference Proceedings
2019Entwicklung eines methodengestützten Vorgehensmodells für das Qualitätsmanagement Reporting (QMR)
Gruber, Tobias
: Krüger, Jörg; Jochem, Roland
Dissertation
2019European standardization of innovation management: The sufficiency of the CEN/TS 16555 in the 6th generation of innovation management
Cap, J.-P.; Hinzmann, F.; Kohl, H.; Orth, R.
Conference Paper
2019Experimental and numerical assessment of weld pool behavior and final microstructure in wire feed laser beam welding with electromagnetic stirring
Meng, X.; Bachmann, M.; Artinov, A.; Rethmeier, M.
Journal Article
2019Fallbasierte Feinplanung im Rahmen der kurzfristigen Fertigungssteuerung
Arlt, Reinhard
: Jochem, Roland; Kohl, Holger; Specht, D.; Mertins, K.
Dissertation
2019Framework for energy efficiency optimization of industrial systems based on the Control Layer Model
Thiele, Gregor; Heimann, Oliver; Grabowski, Knut; Küger, Jörg
Journal Article
2019Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik. Jahresbericht 2018/2019
 
Annual Report
2019From process to activity in the data flow
Lünnemann, Pascal; Riedelsheimer, Theresa; Wehking, Sebastian; Lindow, Kai
Journal Article
2019Für Betreiber von Smarten Fabriken ist Interoperabilität entscheidend
Jäkel, Frank-Walter
Book Article
2019Gestaltungsrichtlinien für die Visualisierung von Produktinformationen in der virtuellen Umgebung CAVE zur Unterstützung von Design Review Teams
Brandenburg, Elisabeth
: Krüger, J.; Stark, Rainer; Thüring, M.
Dissertation
2019Heat treatment of SLM-LMD hybrid components
Uhlmann, Eckart; Düchting, Jan; Petrat, Torsten; Graf, Benjamin; Rethmeier, Michael
Conference Paper
2019Herausforderungen in der Mikrozerspanung
Kuche, Yves; Eckert, Udo
Presentation
2019Highspeed-Plasma-Laser-Cladding (HPLC) als hybrides Beschichtungsverfahren: Evaluierung des Einsatzpotentials für hohe Prozessgeschwindigkeiten
Brunner-Schwer, Christian; Schreiber, Frank; Graf, Benjamin; Rethmeier, Michael
Conference Paper
2019Highspeed-plasma-laser-cladding of thin wear resistance coatings: A process approach as a hybrid metal deposition-technology
Brunner-Schwer, Christian; Petrat, Torsten; Graf, Benjamin; Rethmeier, Michael
Journal Article
2019Hochleistungsbohrwerkzeuge für CFK
Uhlmann, E.; Christiansen, G.; Reimers, W.; Brömmelhoff, K.
Journal Article
2019Hybrid artificial intelligence system for the design of highly-automated production systems
Hagemann, S.; Sünnetcioglu, A.; Stark, R.
Journal Article
2019Hybrid laser arc welding of thick plates X8Ni9 for LNG tank construction
Gook, Sergej; El-Batahgy, A-M.; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2019Implementation of an Energy Metering System for Smart Production
Halstenberg, Friedrich A.; Lindow, Kai; Stark, Rainer
Book Article
2019Improvement of filler wire dilution using external oscillating magnetic field at full penetration hybrid laser-arc welding of thick materials
Üstündag, Ömer; Avilov, Vjaceslav; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2019Improvement of numerical simulation model setup and calculation time in additive manufacturing-laser-metal-deposition components with an advanced modelling strategy
Biegler, Max; Khazan, Pavel; Gatzen, Marius; Rethmeier, Michael
Conference Paper
2019In-Situ-Kraftmessung bei variablen Werkzeugwinkeln
Uhlmann, Eckart; Uhlemann, Sebastian; Kochan, Jaroslaw
Journal Article
2019In-Situ-Kraftmessung bei variablen Werkzeugwinkeln
Uhlmann, Eckart; Uhlemann, Sebastian; Kochan, Jaroslaw
Journal Article
2019Increasing resource efficiency with an engineering decision support system for comparison of product design variants
Buchert, Tom; Ko, Nathanael; Graf, Roberta; Vollmer, Thomas; Alkhayat, Moritz; Brandenburg, Elisabeth; Stark, Rainer; Klocke, Fritz; Leistner, Philip; Schleifenbaum, Johannes Henrich
Journal Article
2019Increasing the productivity and quality of flute grinding processes through the use of layered grinding wheels
Uhlmann, E.; Schroer, N.; Muthulingam, A.; Gulzow, B.
Journal Article
2019Integrating model checking and model based testing for industrial software development
Villani, E.; Pontes, R.P.; Coracini, G.K.; Ambrosio, A.M.
Journal Article
2019Integration of Active Pharmaceutical Ingredient production into a pharmaceutical Lean Learning Factory
Petrusch, N.; Sieckmann, F.; Menn, J.P.; Kohl, H.
Journal Article
2019Integration of automated structure mechanic analyses into production process simulation
Schmitz, M.B.; Stark, R.
Conference Paper
2019Interaction of tool and workpiece in ultrasonic-assisted grinding of high performance ceramics
Uhlmann, E.; Bruckhoff, J.
Journal Article
2019Introducing Product Service System Architectures for realizing Circular Economy
Halstenberg, F.A.; Stark, R.
Journal Article
2019Investigation of liquid metal embrittlement of dual phase steel joints by electro-thermomechanical spot-welding simulation
Frei, Julian; Biegler, Max; Rethmeier, Michael; Böhne, Christoph; Meschut, Gerson
Journal Article
2019Investigation of the mechanical properties of single-pass hybrid laser-arc welded thick X120 pipeline steel plates
Üstündag, Ömer; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2019Investigation on the effect of novel cutting fluids with modified ingredients regarding the long-term resistance of polycarbonate used as machine guards in cutting operations (KSS-PC)
Uhlmann, E.; Haberbosch, K.; Thom, S.; Drieux, S.; Schwarze, A.; Polte, M.
Conference Paper
2019Keine Angst vor Industrie 4.0! - Vier Maßnahmen zur Vorbereitung von Unternehmen auf die neuen Anforderungen menschlicher Arbeit in der Industrie 4.0
Kohl, Holger; Knothe, Thomas; Schallock, Burkhard; Scholz, Julia-Anne
Journal Article
2019Künstliche Intelligenz zum Schutz sicherheitskritischer Energie-Infrastrukturen
Klein, M.; Thiele, Gregor; Krüger, J.
Journal Article
2019Laser Welding of SLM-Manufactured Tubes Made of IN625 and IN718
Jokisch, Torsten; Marko, Angelina; Gook, Sergej; Üstündag, Ömer; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2019Laserhybridschweißen von dickwandigen Stählen mit elektromagnetischer Schmelzbadunterstützung
Gumenyuk, Andrey; Üstündag, Ömer; Gook, Sergej; Rethmeier, Michael
Conference Paper
2019Lean-Methoden und ISO 9001:2015 - Geht das zusammen?
Kohl, Holger; Neumann, Konstantin
Journal Article
2019Leveraging circular economy through a methodology for smart service systems engineering
Halstenberg, F.A.; Lindow, K.; Stark, R.
Journal Article
2019Liquid Metal Embrittlement of Advanced High Strength Steels during Resistance Spot Welding
Frei, Julian
: Krüger, J.; Rethmeier, M.; Jüttner, S.
Dissertation
2019Literature review: Impact assessment of innovation networks
Haunschild, J.; Tsog, S.
Conference Paper
2019Low heat input gas metal arc welding for dissimilar metal weld overlays part III: Hydrogen-assisted cracking susceptibility
Frei, Julian; Alexandrov, Boian T.; Rethmeier, Michael
Journal Article
2019Lücken und Herausforderungen bei der praktischen Umsetzung des Model-Based Systems Engineering
Fresemann, C.; Stark, R.; Sauer, C.; Schleich, B.; Wartzack, S.
Journal Article
2019Manufacturing of graphite electrodes with high geometrical requirements
Uhlmann, E.; Kuche, Y.; Polte, J.; Polte, M.
Conference Paper
2019Mechanical properties characterization of resistance spot welded DP1000 steel under uniaxial tensile tests
Javaheri, E.; Pittner, A.; Graf, B.; Rethmeier, M.
Journal Article
2019Mechanical Properties of Single-pass Hybrid Laser Arc Welded 25 mm Thick-walled Structures Made of Fine-grained Structural Steel
Üstündag, Ömer; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2019Merkmalbasiertes Nutzerunterstützungssystem für die Erfassung von Bauteilen mittels industrieller Computertomographie
Sawczyn, Nikolas
: Hilgenberg, K.; Uhlmann, Eckart; Karpuschewski, B.
Dissertation
2019A method to design Smart Services based on information categorization of industrial use cases
Exner, Konrad; Smolka, Elisa; Blüher, Till; Stark, Rainer
Journal Article
2019Micro-cutting of a MMC-composite for enhanced injection moulds
Uhlmann, E.; Polte, M.; Hein, C.; Polte, J.; Jahnke, C.
Conference Paper
2019Microstructure of Inconel 718 parts with constant mass energy input manufactured with direct energy deposition
Petrat, Torsten; Brunner-Schwer, Christian; Graf, Benjamin; Rethmeier, Michael
Journal Article
2019Mikrofräsbearbeitung von MMC-Werkstoffschichten unter Einsatz von binderlosem PKD. Analyse des Einflusses der Prozessparameter auf den Mikrofräsprozess
Hein, C.; Uhlmann, E.; Polte, J.; Wiesner, H.M.; Jahnke, C.; Polte, M.
Journal Article
2019Mikrostrukturierte CVD-Diamant-Werkzeuge
Bachmann, H.; Meier, P.; Uhlmann, E.; Schröter, D.
Journal Article
2019Modelling of Abrasive Water Jet Cutting with Controlled Depth for Near-Net-Shape Fabrication
Uhlmann, E.; Männel, C.
Journal Article
2019Modelling of brushing processes
Sommerfeld, C.; Uhlmann, E.; Hoyer, A.
Conference Paper
2019Multi level network management - A method for managing inter-organizational innovation networks
Cap, J.-P.; Blaich, E.; Kohl, H.; Raesfeld, A. von; Harms, R.; Will, M.
Journal Article
2019Nachbearbeitung additiv gefertigter Titanbauteile - Potentiale des Fliehkraftgleitschleifens
Uhlmann, E.; Eulitz, A.; Seiffert, K.; Kersting, R.; Schenk, S.
Journal Article
2019Neural Network Hyperparameter Optimization for the Assisted Selection of Assembly Equipment
Hagemann, S.; Sünnetcioglu, A.; Fahse, T.; Stark, R.
Conference Paper
2019Niobcarbid statt Wolframcarbid Alternativer Schneidstoff in der Drehbearbeitung
Kropidlowski, K.; Uhlmann, E.; Woydt, M.; Theiler, G.; Gradt, T.
Journal Article
2019Nonparametric Inverse Dynamic Models for Multimodal Interactive Robots
Haninger, Kevin; Tomizuka, Masayoshi
Preprint
2019Numerical and experimental investigation of thermo-fluid flow and element transport in electromagnetic stirring enhanced wire feed laser beam welding
Meng, X.; Artinov, A.; Bachmann, M.; Rethmeier, M.
Journal Article
2019Numerische Simulation einer AM-Prozesskette im DED Auftragschweißen
El-Sari, Bassel; Biegler, Max; Graf, Benjamin; Rethmeier, Michael
Conference Paper
2019On the search for the origin of the bulge effect in high power laser beam welding
Artinov, A.; Bakir, N.; Bachmann, M.; Gumenyuk, A.; Na, S.-J.; Rethmeier, M.
Journal Article
2019Ortsabhängiges Verschleißmodell für das Doppelseitenplanschleifen mit Planetenkinematik
List, Michael
: Rethmeier, M.; Uhlmann, E.; Klocke, F.
Dissertation
2019Pocket milling of composite fibre-reinforced polymer using industrial robot
Melo, E.G. de; Klein, T.B.; Reinkober, S.; Gomes, J.D.O.; Uhlmann, E.
Journal Article
2019Point Pair Feature Matching: Evaluating Methods to Detect Simple Shapes
Ziegler, M.; Rudorfer, M.; Kroischke, X.; Krone, S.; Krüger, J.
Conference Paper
2019A practical approach to reduce energy consumption in a serial production environment by shutting down subsystems of a machine tool
Can, Alperen; Thiele, Gregor; Krüger, Jörg; Fisch, J.; Klemm, C.
Journal Article
2019Practical stability of under-constrained cable-suspended parallel robots
Surdilovic, D.; Radojicic, J.
Conference Paper
2019Prediction of the initial fatigue crack location of automatically welded tubular joints for jacket support structures
Schaumann, P.; Schürmann, K.; Pittner, A.; Rethmeier, M.
Conference Paper
2019A Process Model for Enhancing Digital Assistance in Knowledge-Based Maintenance
Kovacs, Klaudia; Ansari, Fazel; Geisert, Claudio; Uhlmann, E.; Glawar, Robert; Sihn, Wilfried
Conference Paper
2019Profilverschleißreduzierung beim Planschleifen
Lichtschlag, L.; Uhlmann, E.
Journal Article
2019Prototyping von Produkt-Service Systemen und Smart Services in der Konzeptphase des Entwicklungsprozesses
Exner, Konrad
: Jochem, Roland; Stark, Rainer; Meier, Horst
Dissertation
2019Qualitätskriterien für den Datenfluss im Advanced System Engineering
Müller, Helena; Riedelsheimer, Theresa; Lünnemann, Pascal; Blüher, Till; Stark, Rainer
Conference Paper
2019Reale Daten für Simulationen im digitalen Zwilling
Chemnitz, Moritz; Heimann, Oliver; Vick, A.
Journal Article
2019Reale Daten für Simulationen im digitalen Zwilling - Untersuchung zur Aufnahme von Profinet-Daten und deren Wiedergabe in komplexen Simulationsumgebungen
Chemnitz, M.; Heimann, O.; Vick, A.
Journal Article
2019Reconfiguring machine tool behavior via smart building block systems
Uhlmann, E.; Peukert, B.
Journal Article
2019Reifegradmodelle in der Produktentwicklung
Randermann, M.; Blüher, T.; Jochem, R.; Stark, R.
Journal Article
2019Requirements for a methodology for the analysis and assessment of technological capability in research and technology organizations
Hecklau, F.; Kidschun, F.; Kohl, H.; Tominaj, S.
Conference Paper
2019Resistance spot welding under external load for evaluation of LME susceptibility of zinc coated advanced high strength steel sheets
Frei, Julian; Biegler, Max; Rethmeier, Michael
Conference Paper
2019Review of methodologies for the assessment of the technological capability of RTOS
Hecklau, F.; Kidschun, F.; Tominaj, S.; Kohl, H.
Conference Paper
2019Rheological and Mechanical Gradient Properties of Polyurethane Elastomers for 3D-Printing with Reactive Additives
Wang, P.; Auhl, D.; Uhlmann, E.; Gerlitzky, G.; Wagner, M.H.
Journal Article
2019Safe rendering of high impedance on a series-elastic actuator with disturbance observer-based torque control
Haninger, Kevin; Asignacion, Agner; Oh, Sehoon
Preprint
2019Safety of slim tool extensions for milling operations
Uhlmann, E.; Thom, S.; Barth, E.; Pache, T.; Prasol, L.
Conference Paper
2019Semantic Assistance System for Providing Smart Services and Reasoning in Aero-Engine Manufacturing
Gogineni, S.; Exner, K.; Stark, R.; Nickel, J.; Oeler, M.; Witte, H.
Conference Paper
2019Smart Cyber-Physical System applications in production and logistics: Special issue editorial
Ilie-Zudor, E.; Preuveneers, D.; Ekárt, A.; Hohwieler, E.
Editorial
2019Smart Industrial Products - Smarte Produkte und ihr Einfluss auf Geschäftsmodelle, Zusammenarbeit, Portfolios und Infrastrukturen
Lünnemann, Pascal; Wang, Wei Min; Lindow, Kai
: Müller, Patrick (Hrsg.); Lindow, Kai (Hrsg.); Gregorzik, Stefan (Hrsg.); Stark, Rainer (Hrsg.)
Study
2019Study on the feasibility of modelling notations for integrated Product-Service Systems Engineering
Halstenberg, F.A.; Stark, R.
Journal Article
2019Sustainability Reporting in German Manufacturing SMEs
Steinhöfel, Erik; Galeitzke, Mila; Kohl, Holger; Orth, Ronald
Journal Article
2019Symbiotic human-robot collaborative assembly
Wang, L.; Gao, R.; Vancza, J.; Krüger, J.; Wang, X.V.; Makris, S.; Chryssolouris, G.
Journal Article
2019System zur wenigstens bereichsweisen Regelung einer Temperatur eines Industrieroboters und Verfahren zum Erhöhen der Arbeitsgenauigkeit eines Industrieroboters
Uhlmann, Eckart; Reinkober, Sascha; Lenz, Frederik
Patent
2019Systematic product development methodology for customizable IoT devices
Gogineni, Sonika Krishna; Riedelsheimer, Theresa; Stark, Rainer
Journal Article
2019Systematische Methodenanwendung im dynamischen Qualitätsmanagement bei KMU
Schober, Johannes
: Krüger, Jörg; Jochem, Roland
Dissertation
2019Thermal and technological aspects of double face grinding of Al2O3 ceramic materials
Deja, M.; List, M.; Lichtschlag, L.; Uhlmann, E.
Journal Article
2019Tool wear modelling using micro tool diameter reduction for micro-end-milling of tool steel H13
Manso, C.S.; Thom, S.; Uhlmann, E.; Assis, C.L.F de; Conte, E.G del
Journal Article
2019Towards Learning 3d Object Detection and 6d Pose Estimation from Synthetic Data
Rudorfer, M.; Neumann, L.; Krüger, J.
Conference Paper
2019Ultra-precision-milling of silicon by means of single crystal diamond tools
Uhlmann, E.; Polte, M.; Rolon, D.A.; Kühne, S.
Conference Paper
2019Ultrasonic assisted peripheral milling of fiber reinforced plastics in consideration of clamping and cutting edge geometry
Uhlmann, E.; Protz, F.
Journal Article
2019Use of Digital Twins in Additive Manufacturing Development and Production
Bergmann, André; Lindow, Kai
Conference Paper
2019Variable-Latency Networked P-PI and MPC Controller Performance for Industrial Robots
Vick, Axel; Kilinc, Ali; Guhl, Jan
Conference Paper
2019Verbundprojekt SmartStream: Intelligente Bearbeitung durch die Verwendung schaltbarer Fluide
Schmiedel, C.; Bierwisch, C.; Uhlmann, E.; Menzel, P.; Mohseni-Mofidi, S.; Breinlinger, T.; Nutto, C.
Conference Paper
2019Verfahren zur Herstellung einer Werkzeugelektrode und Verfahren zur ihrer Verwendung
Streckenbach, Jan; Wolf, Cora-Sophia; Börnstein, Julian; Uhlmann, Eckart
Patent
2019Verfahren zur kamerabasierten Instrumentennavigation am Beispiel der HNO-Chirurgie
Katanacho, Manuel
: Krüger, Jörg; Uhlmann, Eckart; Wittenberg, Thomas
Dissertation
2019Vermeidung von Schweißimperfektionen im Überlappbereich bei laserstrahlhybrid-geschweißten Rundnähten
Gook, Sergej; Üstündag, Ömer; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2019Vernetzte Transportroboter in der Fabriklogistik
Chemnitz, Moritz; Vick, Axel
Journal Article
2019What dynamics should impedance-controlled robots render?
Haninger, Kevin; Surdilovic, Dragoljub; Bastidas Cruz, Arturo
Presentation
2019Zusammenfassung und Ausblick
Chemnitz, Moritz
Book Article
20183D laser metal deposition: Process steps for additive manufacturing
Graf, Benjamin; Marko, Angelina; Petrat, Torsten; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
20183D-Vorkonturierung mittels Wasserabrasivstrahl
Uhlmann, E.; Männel, C.
Journal Article
2018Additives Fertigungsverfahren zur Herstellung von Bauteilen mit Eigenschaftsgradienten
Uhlmann, E.; Wagner, M.H.; Gerlitzky, G.
Journal Article
2018Affordance Based Approach to Automatic Program Generation for Industrial Robots in Manufacturing
Heimann, Oliver; Krüger, Jörg
Journal Article
2018Anwendungsfälle
Kind, Simon; Rehfeld, Ingolf; Schmidt, Jonas; Geiger, Andreas; Kirsch, Lukas
Book Article
2018Anwendungsszenario und Evaluierung des ViB-SHP-Ansatzes
Blume, Claas; Kind, Simon; Lünnemann, Pascal
Book Article
2018Application of additive manufactured tungsten carbide tool electrodes in EDM
Uhlmann, Eckart; Bergmann, André; Bolz, Robert; Gridin, Witalij
Journal Article
2018Application of Micro Structured, Boron Doped CVD-diamond as μEDM Tool Electrodes
Uhlmann, Eckart; Oberschmidt, Dirk; Bolz, Robert
Journal Article
2018Artefaktkorrektur für die Computertomographie
Uhlmann, Eckart; Polte, Julian; Melnik, Steffen
Journal Article
2018Assessing the predictive capability of numerical additive manufacturing simulations via in-situ distortion measurements on a LMD component during build-up
Biegler, Max; Graf, Benjamin; Rethmeier, Michael
Journal Article
2018Assistenzbasierte virtuelle 2,5-D-Rekonstruktion von Kulturgut
Schneider, Jan; Nickolay, Bertram
Journal Article
2018Aufbau von VR Trainingsumgebungen aus Daten der Virtuellen Produktentstehung
Geiger, Andreas; Stark, Rainer
Journal Article
2018Augmented Reality im Qualitätsmanagement in der Produktentstehung - Chancen und Risiken durch den Wandel der Industrie 4.0
Heinze, Adrian
Master Thesis
2018Automated Body-in-White Production System Design: Data-Based Generation of Production System Configurations
Hagemann, S.; Stark, R.
Conference Paper
2018Automatic design and synthesis of control for a plug and play active vibration control module
Uhlmann, E.; Kushwaha, S.; Mewis, J.; Richarz, S.
Journal Article
2018Automatic detection of field-grown cucumbers for robotic harvesting
Fernández, R.; Montes, H.; Surdilovic, J.; Surdilovic, D.; Gonzalez-De-Santos, P.; Armada, M.
Journal Article
2018Automatisierte Fertigung von Hohlprofilknoten für Jacket-Gründungsstrukturen
Schaumann, P.; Rethmeier, M.; Schürmann, K.; Pittner, A.; Dänekas, C.; Schippereit, C.
Journal Article
2018Beam Hardening Correction Using Cone Beam Consistency Conditions
Abdurahman, S.; Frysch, R.; Bismark, R.; Melnik, S.; Beuing, O.; Rose, G.
Journal Article
2018Benchmarking-unterstützte Standortplanung von industriellen Wertschöpfungsprozessen
Zhou, Xing
: Kohl, Holger
Dissertation
2018Benötigte neue Jobrollen/Engineering Disziplinen
Lünnemann, Pascal
Book Article
2018Boron-doped CVD diamond micro-end mills for machining titanium
Uhlmann, Eckart; Polte, Mitchel; Polte, Julian; Oberschmidt, Dirk
Conference Paper
2018Build-up strategies for additive manufacturing of three dimensional Ti-6Al-4V-parts produced by laser metal deposition
Spranger, Felix; Graf, Benjamin; Schuch, Michael; Hilgenberg, Kai; Rethmeier, Michael
Journal Article
2018Build-up strategies for laser metal deposition in additive manufacturing
Petrat, Torsten; Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2018Build-up strategies for temperature control using laser metal deposition for additive manufacturing
Petrat, Torsten; Winterkorn, René; Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2018Building the ENRICH Community - Common European Network as Advantage for ENRICH in Brazil, China and in the USA
Haunschild, Johanna; Orth, Ronald; Pereira Ferreira, Romulo
Conference Paper
2018Camera-based instrument navigation in ENT-surgery
Katanacho, Manuel; Uhlmann, Eckart
Conference Paper
2018CareJack - die intelligente Softorthese zur Ergonomieunterstützung
Kuschan, Jan; Schmidt, Henning; Krüger, Jörg
Journal Article
2018Cloud-based active disturbance rejection control for industrial robots
Briese, Clemens; Vick, Axel; Krüger, Jörg
Conference Paper
2018Cluster identification of sensor data for predictive maintenance in a Selective Laser Melting machine tool
Uhlmann, E.; Pastl Pontes, R.; Geisert, C.; Hohwieler, E.
Journal Article
2018Comparison between GTA and laser beam welding of 9% Ni steel for critical cryogenic applications
El-Batahgy, A-M.; Gumenyuk, A.; Gook, S.; Rethmeier, M.
Journal Article
2018Concept and architecture for programming industrial robots using augmented reality with mobile devices like microsoft HoloLens
Guhl, J.; Nguyen, S.T.; Kruger, J.
Conference Paper
2018Concept of sustainable data for a selective laser melting machine
Uhlmann, Eckart; Pastl Pontes, Rodrigo; Laghmouchi, Abdelhakim; Bergmann, André
Journal Article
2018Conceptual framework for analysing knowledge dynamics in engineering science
Märten, A.; Jenek, J.F.W.; Wang, W.M.; Fleck, C.; Meyer, H.; Stark, R.; Ammon, S.
Conference Paper
2018Corporate Governance: The Evaluation Based Approach to the Governance and Business Models of the EPIC Centre of Excellence in Production Informatics and Control (EPIC Coe)
Monostori, Laszlo; Kadar, Botond; Nick, Gabor; Pfeiffer, Andras; Vargedo, Tamas; Hecklau, Fabian
Conference Paper
2018Correction to: Execution and evaluation of enterprise models in IEM/MO2GO based on Petri net
Jin, G.; Jäkel, F.-W.
Journal Article
2018Das cyberphysische Produktmodell
Lünnemann, Pascal; Kirsch, Lucas
Book Article
2018Data-driven business model a methodology to develop smart services
Exner, K.; Stark, R.; Kim, J.Y.
Conference Paper
2018Decision support tool to derive sustainable product configurations as a basis for conceptual design
Buchert, T.; Stark, R.
Conference Paper
2018Definition of edges in correlation to abrasive flow machining as a finishing process
Groeger, S.; Segel, F.; Uhlmann, E.; Roßkamp, S.
Journal Article
2018Design of neural network arc sensor for gap width detection in automated narrow gap GMAW
Fabry, C.; Pittner, A.; Rethmeier, M.
Journal Article
2018Design Simulation of Components made from Diamond-Ceramic Composites for Deep-Sea Mining
Uhlmann, Eckart; Uhlemann, Sebastian; Borsoi Klein, Tiago; Schmiedel, Christian
Poster
2018Developing Regional Intellectual Capital through Future Workshops. A Case Study from Germany
Orth, Ronald; Federwisch, Tobias; Jordan, Kristina
Conference Paper
2018Development of a Methodology to Develop Venture Capital Strategies in Applied R&D Networks
Cap, Jan-Patrick
Conference Paper
2018Diamond burnishing for mould and die industry
Uhlmann, Eckart; Oberschmidt, Dirk; Guhde, Sebastian; Polte, Mitchel; Polte, Julian
Conference Paper
2018Dienstebasierte Integration objektspezifischer Lageerkennungsalgorithmen am Beispiel eines roboterbasierten Greifszenarios
Rudorfer, Martin; Chemnitz, Moritz
Book Article
2018Digitale Zwillinge - Entwicklungen im Maschinenbau
Stark, Rainer; Halstenberg, Friedrich A.
Journal Article
2018Distributed Industrial Robot Control using Environment Perception and Parallel Path Planning Cloud Services
Wassermann, Jonas; Vonasek, Vojtech; Vick, Axel
Conference Paper
2018Distributed Motion Planning for Industrial Random Bin Picking
Vonasek, Vojtech; Vick, Axel; Krüger, Jörg
Journal Article
2018Distributed Product Design in Educational Programs
Fresemann, C.; Stark, R.; Damgrave, R.; Bekkering, N.; Lutters, E.
Journal Article
2018Drehen mit Niobcarbid-basierten Werkzeugen - Verschleißuntersuchungen von Niobcarbid verglichen mit Wolframcarbid auf eisenbasierten Werkstoffen
Uhlmann, E.; Kropidlowski, K.; Hinzmann, D.; Meier, P.; Prasol, L.; Woydt, M.
Journal Article
2018Ductile machining of brittle materials for manufacturing micro-optic components
Uhlmann, Eckart; Oberschmidt, Dirk; Rolon, D.A.; Kühne, S.; Jagodzinski, M.; Malcher, M.
Conference Paper
2018Dynamic Analysis of Abrasive Filaments in Contact with Different Workpiece Geometries
Uhlmann, E.; Sommerfeld, C.
Journal Article
2018Effect of laser-beam and hybrid-laser-arc welding parameters and filler metal on microstructure and mechanical properties of thick heat-treated steel X8Ni9+QT640 for cryogenic service
El-Batahgy, A-M.; Gook, S.; Gumenyuk, A.; Rethmeier, M.
Presentation
2018Effects of abrasive waterjet trepanning on the kerf formation
Uhlmann, E.; Männel, C.
Conference Paper
2018The Effects of Laser Microtexturing of Biomedical Grade 5 Ti-6Al-4V Dental Implants (Abutment) on Biofilm Formation
Uhlmann, Eckart; Schweitzer, Luiz; Kieburg, Heinz; Spielvogel, Anja; Huth-Herms, Katrin
Journal Article
2018An Efficiency-Oriented Batch Reduction Procedure for Hazardous Material
Halstenberg, Friedrich A.; Chen, Eleanor Y.; Rumpel, Guido; Schneider, Ralph; Stark, Rainer
Journal Article
2018Einsatzverhalten und Leistungsbedarfe unterschiedlicher Kühlungsmethoden beim Außen-Längs-Runddrehen
Fürstmann, Paul
: Krüger, J.; Uhlmann, Eckart; Klocke, F.
Dissertation
2018Electro-discharge drilling with MP-based carbon fibre electrodes
Uhlmann, Eckart; Perfilov, Ivan; Yabroudi, S.; Schweitzer, Luiz; Polte, Mitchel
Conference Paper
2018Embedding electronics into additive manufactured components using laser metal deposition and selective laser melting
Petrat, Torsten; Kersting, Robert; Graf, Benjamin; Rethmeier, Michael
Journal Article
2018Enabling Human-Robot-Interaction via Virtual and Augmented Reality in Distributed Control Systems
Guhl, Jan; Hügle, Johannes; Krüger, Jörg
Journal Article
2018Endkonturnahe Schruppbearbeitung von Titanaluminid mittels Wasserabrasivstrahlen mit kontrollierter Schnitttiefe
Faltin, Fabian
: Kohl, Holger; Uhlmann, E.; Abele, E.
Dissertation
2018EnerSEC. Reaktive IT-Sicherheitsüberwachung automatisierter technischer Anlagen in sicherheitskritischen Energie-Infrastrukturen
Klein, Max; Thiele, Gregor; Horn, Christian; Krüger, Jörg
Poster
2018Engineering activities: Considering value creation from a holistic perspective
Lünnemann, P.; Stark, R.; Wang, W.M.; Manteca, P.I.
Conference Paper
2018ENRICH - European Network of Research and Innovation Centres and Hubs
Orth, Ronald; Haunschild, Johanna
Poster
2018ENRICH Community Building - Development of a Decision Support Tool for Membership Selection
Haunschild, Johanna; Kreiling, Laura
Conference Paper
2018Enterprise Interoperability
: Zelm, Martin (Editor); Jaekel, Frank-Walter (Editor); Doumeingts, Guy (Editor); Wollschlaeger, Martin (Editor)
Conference Proceedings
2018Enterprise interoperability management and artifacts
Jäkel, Frank-Walter
Conference Paper
2018Entwicklung eines hochauflösenden wellenlängendispersiven Spektrometers für den Spektralbereich harter Röntgenstrahlung
Holfelder, Ina
: Oberschmidt, D.; Uhlmann, Eckart; Beckhoff, B.
Dissertation
2018Entwicklung eines methodenbasierten Modells zur Messung und Bewertung der Produktivität von Dienstleistungsprozessen
Amini, Ahmad Schafiq
: Krüger, J.; Jochem, R.; Woll, R.; Herrmann, J.
Dissertation
2018Entwicklung eines Validierungsframeworks zur erlebbaren Absicherung von Fahrerassistenzsystemen
Auricht, Maik
: Göhlich, D.; Stark, Rainer; Bernasch, J.
Dissertation
2018Entwicklung und Aufbau eines Probenhalters für die Emissionsgradmessung an semitransparenten Materialien
Gieseler, J.; Monte, C.; Adibekyan, A.; Hollandt, J.; Kersting, R.
Journal Article
2018Equivalent heat source approach in a 3D transient heat transfer simulation of full-penetration high power laser beam welding of thick metal plates
Artinov, A.; Bachmann, M.; Rethmeier, M.
Journal Article
2018Erhöhung der Genauigkeit beim Fräsen mit Industrierobotern
Uhlmann, E.; Reinkober, S.; Hollerbach, T.
Journal Article
2018Erhöhung der Genauigkeit beim Fräsen mit Industrierobotern durch abtriebsseitige Winkelmesssysteme
Uhlmann, Eckart; Reinkober, Sascha; Hollerbach, Tobias
Journal Article
2018Evaluation Model for the Derivation of a Sustainable Digitisation Strategy
Knothe, T.; Oertwig, N.; Obenaus, M.; Butschek, P.
Conference Paper
2018Evaluation of Business Models - A Systematic Literature Review
Steinhöfel, Erik; Hussinki, Henri; Bornemann, Manfred
Conference Paper
2018Evaluierung
Blume, Claas; Lünnemann, Pascal
Book Article
2018Execution and evaluation of enterprise models in IEM/MO2GO based on Petri net
Jin, Guangying; Jäkel, Frank-Walter
Journal Article
2018Facts & Figures: Get to know Brazil and its innovative Industries
Haunschild, Johanna; Pereira Ferreira, Romulo; Tsog, Sara
Report
2018Facts & Figures: Get to know the European Union and its Innovative Industries
Haunschild, Johanna; Pereira Ferreira, Romulo
Report
2018Fatos & Figuras: Conheça a União Europeia e suas indústrias inovadoras
Haunschild, Johanna; Pereira Ferreira, Romulo
Report
2018Feedback to Design with Digital Lifecycle-Twins - literature review and concept presentation
Riedelsheimer, Theresa; Lindow, Kai; Stark, Rainer
Conference Paper
2018Feinbohrspindel für die Trockenfunkenerosion
Uhlmann, Eckart; Yabroudi, S.; Polte, Mitchel
Journal Article
2018Finishbearbeitung technischer Oberflächen aus gehärtetem Stahl unter Verwendung von Rundbürsten mit Schleiffilamenten
Hochschild, Leif
: Kraft, Marc; Uhlmann, Eckart; Klocke, Fritz
Dissertation
2018Finite element analysis of in-situ distortion and bulging for an arbitrarily curved additive manufacturing directed energy deposition geometry
Biegler, Max; Marko, Angelina; Graf, Benjamin; Rethmeier, Michael
Journal Article
2018The four-step approach for the creation of the HR Concept for the EPIC Centre of Excellence in Production Informatics and Control (EPIC CoE)
Hecklau, Fabian; Orth, Ronald; Kidschun, Florian; Nick, Gabor
Conference Paper
2018Fräsbearbeitung von Nickelbasislegierungen mit Industrierobotern.
Reinkober, Sascha
: Uhlmann, Eckart
Dissertation
2018Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik. Jahresbericht 2017/2018
 
Annual Report
2018Full penetration hybrid laser arc welding of up to 28 mm thick S355 plates using electromagnetic weld pool support
Üstündag, Ömer; Avilov, Vjaceslav; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2018Futur 3.2018
: Uhlmann, Eckart
Journal Issue
2018Ganzheitliche Planung der Qualitätsorganisation in produzierenden Unternehmen
Behmer, Falk Johannes
: Krüger, J.; Jochem, Roland; Woll, R.
Dissertation
2018Ganzheitliche Produktionssysteme in der Pharmaindustrie
Sieckmann, F.; Helm, R.; Kohl, H.; Wissel, S.
Journal Article
2018Gestaltungsaspekte immersiver Fahrsimulationsumgebungen
Reich, Diana
: Stark, Rainer
Dissertation
2018Gesture based robot programming using process knowledge
Heimann, O.; Hügle, J.; Krüger, J.
Conference Paper
2018Grinding of high performance materials with spherical mounted points
Koprowski, Stefan
: Kohl, H.; Uhlmann, Eckart; Weingaertner, W.L.
Dissertation
2018Hand Shape Recognition Using Very Deep Convolutional Neural Networks
Rakowski, Alexander; Wandzik, Lukasz
Conference Paper
2018Hard material small-batch industrial machining robot
Brunete, A.; Gambao, E.; Koskinen, J.; Heikkilä, T.; Kaldestad, K.B.; Tyapin, I.; Hovland, G.; Surdilovic, D.; Hernando, M.; Bottero, A.; Anton, S.
Journal Article
2018Helical electrodes for improved flushing conditions in drilling EDM of MAR-M247
Uhlmann, Eckart; Perfilov, Ivan; Yabroudi, S.; Schweitzer, Luiz; Polte, Mitchel
Conference Paper
2018Heutige Defizite industrieller Anwendung
Lünnemann, Pascal
Book Article
2018High-pressure jet cutting with liquid CO2 of plastics
Uhlmann, E.; John, P.
Conference Paper
2018Hochleistungskeramik effizienter schleifen
Borsoi Klein, Tiago; Korpowski, Stefan
Journal Article
2018Holo Pick'n'Place
Rudorfer, M.; Guhl, J.; Hoffmann, P.; Krüger, J.
Conference Paper
2018How participative is open source hardware? Insights from online repository mining
Bonvoisin, J.; Buchert, T.; Preidel, M.; Stark, R.G.
Journal Article
2018Human robot collaboration - using kinect v2 for ISO/TS 15066 speed and separation monitoring
Rosenstrauch, Martin J.; Pannen, Tessa J.; Krüger, Jörg
Journal Article
2018Hybrid laser arc welding of 25 mm thick materials using electromagnetic weld pool support
Üstündag, Ömer; Avilov, Vjaceslav; Gumenyuk, Andrey; Rethmeier, Michael
Presentation
2018Hybrid laser-arc welding of thick-walled ferromagnetic steels with electromagnetic weld pool support
Üstündag, Ömer; Fritzsche, André; Avilov, Vjaceslav; Rethmeier, Michael; Gumenyuk, Andrey
Journal Article
2018Hybrid Prototype-in-the-Loop
Buchholz, Christian; Kind, Simon; Blume, Claas; Enin, Alexey; Stark, Rainer
Journal Article
2018Hybrid prototype-in-the-loop
Buchholz, C.; Kind, S.; Blume, C.; Enin, A.; Stark, R.
Journal Article
2018Hybrides Auftragschweißen: Potentiale des laserunterstützten Plasma-Pulver-Auftragschweißens (PTA)
Brunner-Schwer, Christian; Graf, Benjamin; Rethmeier, Michael; Schreiber, Frank
Conference Paper
2018Identification of Human Dynamics in User-Led Physical Human Robot Environment Interaction
Haninger, Kevin; Surdilovic, Dragoljub
Conference Paper
2018Implementation of lean production systems in small and medium-sized pharmaceutical enterprises
Sieckmann, Felix; Ngoc, Hien Nguyen; Helm, René; Kohl, Holger
Journal Article
2018Improved degassing in laser beam welding of aluminum die casting by an electromagnetic field
Fritzsche, A.; Hilgenberg, K.; Teichmann, F.; Pries, H.; Dilger, K.; Rethmeier, M.
Journal Article
2018Improvement of Defect Detectability in Machine Tools Using Sensor-based Condition Monitoring Applications
Demilia, G.; Gaspari, A.; Hohwieler, E.; Laghmouchi, A.; Uhlmann, E.
Journal Article
2018In-process quality assurance for selective laser melting through online generation of key performance indicators in context of industrie 4.0
Pastl Pontes, Rodrigo; Uhlmann, Eckart
Book Article
2018In-situ distortions in LMD additive manufacturing walls can be measured with digital image correlation and predicted using numerical simulations
Biegler, Max; Graf, Benjamin; Rethmeier, Michael
Journal Article
2018Increased tool performance with niobium carbide based cutting materials in dry cylindrical turning
Uhlmann, E.; Hinzmann, D.; Kropidlowksi, K.; Meier, P.; Prasol, L.; Woydt, M.
Journal Article
2018Industrial Image Processing Applications as Orchestration of Web Services
Rudorfer, M.; Krüger, J.
Journal Article
2018Industrielle Netzwerkanwendungen in der Virtuellen Produktentstehung
Stark, Rainer; Riedelsheimer, Theresa
Journal Article
2018Industry 4.0 as enabler for a sustainable development
Stock, Tim; Obenaus, Michael; Kunz, Sascha; Kohl, Holger
Journal Article
2018Influence of ceramic media composition on material removal in vibratory finishing
Uhlmann, E.; Eulitz, A.
Journal Article
2018Influence of cutting edge micro-geometry in micro-milling of copper alloys with reduced lead content
Uhlmann, Eckart; Kuche, Yves; Polte, Julian; Polte, Mitchel
Journal Article
2018Influence of heat input and preheating on the cooling rate, microstructure and mechanical properties at the hybrid laser-arc welding of API 5L X80 steel
Turichin, G.; Kuznetsov, M.; Pozdnyakov, A.; Gook, S.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2018Influence of tilt and lead angles on 5-axis grinding with spherical mounted points
Koprowski, S.; Uhlmann, E.; Weingaertner, W.
Journal Article
2018International Innovation Partnerships by ENRICH in Brazil
Will, Markus; Haunschild, Johanna
Presentation
2018Intuitive robot programming through environment perception, augmented reality simulation and automated program verification
Wassermann, Jonas; Vick, Axel; Krüger, Jörg
Journal Article
2018Intuitive Roboterprogrammierung per Fingerzeig
Heimann, Oliver; Hügle, Johannes
Journal Article
2018Investigating challenges of a sustainable use of marine mineral resources
Kaluza, Andrea; Lindow, Kai; Stark, Rainer
Journal Article
2018Investigation of solidification cracking susceptibility during laser beam welding using an in-situ observation technique
Bakir, N.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2018Investigation of wear resistance of coated PcBN turning tools for hard machining
Uhlmann, E.; Riemer, H.; Schröter, D.; Henze, S.; Sammler, F.; Barthelmä, F.; Frank, H.
Journal Article
2018IT-basiertes Werkzeug zur Datenflussanalyse im Entwicklungsumfeld
Riedelsheimer, Theresa; Lünnemann, Pascal; Wehking, Sebastian; Lindow, Kai
Journal Article
2018IT-Systemarchitektur
Lünnemann, Pascal; Kirsch, Lucas; Kind, Simon; Becker, Waldemar; Könnecke, Konstantin; Zuchold, Jörg-Uwe
Book Article
2018Knowledge in engineering design
Preidel, Maurice; Wang, Wei Min; Exner, Konrad; Stark, Rainer
Conference Paper
2018Konstruktive Maßnahmen zur Reduzierung des thermischen Einflusses auf die Genauigkeit von Industrierobotern
Reinkober, Sascha; Mohnke, Christian
Journal Article
2018Laser beam oscillation welding for automotive applications
Müller, A.; Goecke, S.F.; Rethmeier, M.
Journal Article
2018Laser-plasma-cladding as a hybrid metal deposition-technology applying a SLM-produced copper plasma nozzle
Brunner-Schwer, Christian; Kersting, Robert; Graf, Benjamin; Rethmeier, Michael
Journal Article
2018Laser-Pulver-Auftragschweißen in der additiven Prozesskette für Legierungen aus dem Turbomaschinenbau
Graf, Benjamin
: Uhlmann, E.; Rethmeier, Michael; Schmidt, M.
Dissertation
2018Learning Factory for Industry 4.0 to provide future skills beyond technical training
Schallock, Burkhard; Rybski, Christoffer; Jochem, Roland; Kohl, Holger
Journal Article
2018Learning process planning for special machinery assembly
Menn, Jan-Philipp; Sieckmann, Felix; Kohl, Holger; Seliger, Günther
Journal Article
2018Learnstruments: Learning-conducive artefacts to foster learning productivity in production engineering
Menn, Jan-Philipp; Muschard, Bernd; Schumacher, Bastian; Sieckmann, Felix; Kohl, Holger; Seliger, Günther
Journal Article
2018Leichtbau für Triebwerke - Bearbeitung von Ceramic Matrix Composites
Borsoi Klein, Tiago
Journal Article
2018Low heat input gas metal arc welding for dissimilar metal weld overlays part II: The transition zone
Frei, Julian; Alexandrov, Boian T.; Rethmeier, Michael
Journal Article
2018Machine Tool and Technology for Manufacturing of Micro-structures by Micro Dry Electrical Discharge Milling
Uhlmann, E.; Perfilov, I.
Journal Article
2018Manufacturing and replication of sub-10 μm micro-bowls for biomedical sensor systems
Uhlmann, Eckart; Hein, Christoph; Polte, Mitchel; Polte, Julian; Dähne, L.
Conference Paper
2018Manufacturing of carbide tools by Selective Laser Melting
Uhlmann, Eckart; Bergmann, André; Bolz, Robert
Journal Article
2018Maximization of operational workspace of a mobile manipulator system
Kalidindi, V.V.; Vick, A.; Krüger, J.
Conference Paper
2018Mechanical pretreatment before electroplating of aluminium alloy AlSi12
Uhlmann, E.; Jaczkowski, R.
Journal Article
2018Methode zur Bestimmung spezifischer Kräfte durch Fräsversuche und Anwendung bei der Natursteinbearbeitung
Manthei, Marcel
: Kohl, H.; Uhlmann, Eckart; Denkena, B.
Dissertation
2018Methodik zur integrierten virtuellen Auslegung und Absicherung flexibler Bauteile
Hofheinz, Nicolas
: Rethmeier, Michael; Stark, Rainer; Wartzack, Sandro; Schwenk, C.
Dissertation
2018Methodology for the in-process evaluation of software-based process failures in Selective Laser Melting machine tools
Pastl Pontes, Rodrigo
: Krüger, Jörg; Uhlmann, Eckart; Gomes, Oliveira
Dissertation
2018Micro formed holographic security features in steel
Uhlmann, Eckart; Schulze, Stephanie; Polte, Julian; Hein, Christoph; Matthiesen, Johannes; Böge, Manfred
Conference Paper
2018Mikrobohren ohne flüssige Dielektrika
Uhlmann, Eckart; Yabroudi, S.; Polte, Mitchel
Journal Article
2018Mikrofräswerkzeuge mit Schneiden aus cBN
Uhlmann, E.; Polte, J.; Polte, M.; Kuche, Y.; Wiesner, H.
Journal Article
2018Model based, modular configuration of cyber physical systems for the information management on shop-floor
Jaekel, F.-W.; Torka, J.; Eppelein, M.; Schliephack, W.; Knothe, T.
Conference Paper
2018Modelling of Material Removal in Abrasive Flow Machining
Uhlmann, E.; Roßkamp, S.
Journal Article
2018Möglichkeiten der Bildverarbeitung für Additive Manufacturing Reparaturen
Schlüter, Marian
Presentation
2018Morphing Detection Using a General-Purpose Face Recognition System
Wandzik, Lukasz; Kaeding, Gerald; Vicente-Garcia, Raul
Conference Paper
2018Motion planning with motion primitives for industrial bin picking
Vonasek, V.; Vick, A.; Saska, M.
Conference Paper
2018Multimodal Environment Dynamics for Interactive Robots
Haninger, Kevin; Surdilovic, Dragoljub
Conference Paper
2018Neues Elektrodenkonzept verbessert Senkerodieren
Streckenbach, Jan; Uhlmann, Eckart; Wolf, Cora-Sophia; Börnstein, Julian; Polte, Mitchel
Journal Article
2018A new process design for manufacturing sapphire wafers
Uhlmann, E.; List, M.; Patraschkov, M.; Trachta, G.
Journal Article
2018Novel metrology to determine the critical strain conditions required for solidification cracking during laser welding of thin sheets
Bakir, N.; Pavlov, V.; Zavjalov, S.; Volvenko, S.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2018Numerical simulation of the weld pool dynamics during pulsed laser welding using adapted heat source models
Lange, F.; Artinov, A.; Bachmann, M.; Rethmeier, M.; Hilgenberg, K.
Journal Article
2018Numerical simulation on the origin of solidification cracking in laser welded thick-walled structures
Bakir, N.; Artinov, A.; Gumenyuk, A.; Bachmann, M.; Rethmeier, M.
Journal Article
2018Numerische Prozesssimulation zur Auslegung des Druckfließläppens am Beispiel additiv gefertigter Bauteile
Schmiedel, Christian
: Rethmeier, Michael; Uhlmann, Eckart; Abele, Eberhard
Dissertation
2018Oberflächengüte additiv gefertigter Kupferbauteile: Steigerung der Oberflächenqualität von Deck- und Seitenflächen von SLM-Bauteilen
Uhlmann, E.; Kashevko, V.
Journal Article
2018Oberflächenvorbehandlung von Fassadenglas
Uhlmann, E.; Jaczkowski, R.
Journal Article
2018Online-Messung bei der Drehbearbeitung Bauteildurchmesser und- rauheit während der Zerspanung messen
Uhlmann, E.; Holznagel, T.; Prasol, L.
Journal Article
2018Optimization with the evolution strategy by example of electrical-discharge drilling
Streckenbach, J.; Santibáñez Koref, I.; Rechenberg, I.; Uhlmann, E.
Conference Paper
2018Optimized data integration for tracelinking in product development through the application of semantic web technologies
Woll, Robert
: Stark, Rainer
Dissertation
2018Orbital hybrid laser arc welding using a high power fibre laser for pipeline construction
Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2018Perspectives for International Engineering Education
Stock, Tim; Kohl, Holger
Journal Article
2018PKD-Glattdrückwerkzeuge für den Werkzeug- und Formenbau
Uhlmann, Eckart; Polte, Mitchel; Polte, Julian; Guhde, Sebastian; Kuche, Yves; Kappel, Thomas
Journal Article
2018Porosity of LMD manufactured parts analyzed by Archmimedes method and CT
Marko, Angelina; Raute, Julius; Linaschke, Dorit; Graf, Benjamin; Rethmeier, Michael
Journal Article
2018Potentials and limitations of simulation based artefact correction in computed tomography
Uhlmann, Eckart; Polte, Julian; Melnik, Steffen
Conference Paper
2018PowerGrasp: Concept for a novel Soft-Robotic Arm Support System
Kuschan, Jan; Goppold, Jean-Paul; Schmidt, Henning; Krüger, Jörg
Conference Paper
2018Präzise gestenbasierte Roboterprogrammierung
Heimann, Oliver; Hügle, Johannes; Krüger, Jörg
Book Article
2018Probabilities in safety of machinery - how fixed and movable guards bring about a significant risk reduction
Mödden, H.; Uhlmann, E.; Prasol, L.; Thom, S.; Duchstein, B.
Conference Paper
2018Prognose der Oberflächenbeschaffenheit für die additive Fertigung mittels Laser-Pulver-Auftragschweißen
Marko, Angelina; Petrat, Torsten; Graf, Benjamin; Rethmeier, Michael
Conference Paper
2018Prozessüberwachung beim ultraschallunterstützten Schleifen: Einfluss der Werkzeuggeometrie und der Prozessparameter auf die Ultraschallamplitude beim Schleifen
Uhlmann, E.; Bruckhoff, J.
Journal Article
2018A PSS maturity self-assessment tool
Exner, Konrad; Balder, Juliane; Stark, Rainer
Journal Article
2018Qualitätsmanagement in der Automobilindustrie und dessen Umsetzung an Produktionsstandorten in der Volksrepublik China unter Berücksichtigung kultur- und kooperationsbedingter Einflüsse
Linthe, Oliver
: Krüger, J.; Jochem, R.; Woll, R.
Dissertation
2018Quantification and compensation of systematic errors in pressure measurements applied to oil pipelines
Thiele, Gregor; Liu, Martin; Chemnitz, Moritz; Krüger, Jörg
Conference Paper
2018Registration of pre- and postoperative surface scans for pediatric neurosurgery
Katanacho, Manuel; Lack, John-Certus; Fehlhaber, Felix; Krüger, Jörg
Journal Article
2018Robust Passivity and Passivity Relaxation for Impedance Control of Flexible-Joint Robots with Inner-Loop Torque Control
Haninger, Kevin; Tomizuka, Masayoshi
Journal Article
2018Safe human robot collaboration - Operation area segmentation for dynamic adjustable distance monitoring
Rosenstrauch, Martin J.; Krüger, Jörg
Conference Paper
2018Shop floor management systems in case of increasing process variation
Schliephack, Wolf
Conference Paper
2018Smart Service Lebenszyklus
Exner, Konrad; Blüher, Till; Stark, Rainer
Journal Article
2018SmartSensX. Ein Konzept für vernetzte tragbare Sensoren zur Anwendung in der Softrobotik und Mensch Maschine Interaktion
Hackbart, R.; Kostelnik, J.; Kuschan, Jan; Schmidt, Henning; Krüger, Jörg; Vieroth, R.; Lang, K.-D.
Conference Paper
2018Smoothed Particle Hydrodynamics simulation of the machining process of Inconel 718
Uhlmann, E.; Barth, E.
Journal Article
2018Spannutschleifen von Hartmetall-Schaftwerkzeugen mit gradierten Schleifscheiben
Schröer, Nikolas
: Meyer, H.J.; Uhlmann, Eckart; Biermann, Dirk
Dissertation
2018State of the Art Literature Analysis of Innovation Network Management Frameworks
Cap, Jan-Patrick
Conference Paper
2018Strain-rate controlled Gleeble experiments to determine the stress-strain behavior of HSLA steel S960QL
Neubert, S.; Pittner, A.; Rethmeier, M.
Journal Article
2018Strömungsschleifen von Turbinenschaufeln
Schmiedel, Christian
Journal Article
2018Study of gap and misalignment tolerances at hybrid laser arc welding of thick-walled steel with electromagnetic weld pool support system
Üstündag, Ömer; Fritzsche, André; Avilov, Vjaceslav; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2018A study on shielded metal arc welding of 9%Ni steel using non-conventional ferritic welding electrode for LNG facilities
Siayah, A.; El-Batahgy, A-M.; Khafagi, S.; Gumenyuk, A.; Gook, S.; Rethmeier, M.
Presentation
2018Study on sustainability developments in industrial practice
Lindow, Kai; Kaluza, Andrea; Stark, Rainer
Journal Article
2018Study on the role of recondensation flux in high power laser welding by computational fluid dynamics simulations
Muhammad, S.; Han, S.-W.; Na, S.-J.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2018Substitution of commercially coated tungsten carbide tools in dry cylindrical turning process by HiPIMS coated niobium carbide cutting inserts
Uhlmann, E.; Hinzmann, D.; Kropidlowksi, K.; Meier, P.; Prasol, L.; Woydt, M.
Journal Article
2018Surface finishing of hardened steel with abrasive brushes
Uhlmann, E.; Sommerfeld, C.
Conference Paper
2018Surface integrity and chip formation in abrasive flow machining
Uhlmann, E.; Roßkamp, S.
Journal Article
2018Susceptibility of electrolytically galvanized dual-phase steel sheets to liquid metal embrittlement during resistance spot welding
Frei, Julian; Rethmeier, Michael
Journal Article
2018Sustainable Innovation in a Multi-University Master Course
Gladysz, Bartlomiej; Urgo, Marcello; Gaspari, Lorenzo; Pozzan, Giovanna; Stock, Tim; Haskins, Cecilia; Jarzebowska, Elzbieta; Kohl, Holger
Journal Article
2018Temperaturvariable Computertomographie: Einsatz für die Qualitätssicherung komplexer Baugruppen
Sawczyn, N.; Polte, M.; Uhlmann, E.
Journal Article
2018Test of industrial Internet of Things. Opening the black box
Jaekel, Frank-Walter; Torka, Jan
Conference Paper
2018Test services for interoperable and secure shop-floor IT application interfaces in OPC-UA
Jäkel, Frank-Walter; Wolff, Tobias; Hackel, Leonard
Conference Paper
2018Three-dimensional dynamic contact analysis of abrasive filaments with a multi-body system
Uhlmann, E.; Sommerfeld, C.
Journal Article
2018Trochoide Fräsbearbeitung mit Industrierobotern
Uhlmann, Eckart; Reinkober, Sascha; Hoffmann, Martin; Käpernick, Peer
Journal Article
2018Trochoide Fräsbearbeitung mit Industrierobotern
Uhlmann, E.; Reinkober, S.; Hoffmann, M.; Käpernick, P.
Journal Article
2018Trocken und rückstandsfrei CFK bearbeiten - Hochdruckstrahlschneiden mit flüssigem CO2
Uhlmann, Eckart; John, Patrick; Reinkober, Sascha
Journal Article
2018Ultrapräzisionsverfahren zur Erhöhung der Güte abbildender Beugungsgitter
Kühne, Stefan
: Stark, Rainer; Uhlmann, Eckart; Brinksmeier, E.
Dissertation
2018Understanding PLM and PLM customizing: A theoretical fundament for a conceptual approach
Venghaus, E.; Stark, R.
Conference Paper
2018Uniformed approach for exchange of functional and behavior models for simulation using Functional Modelling Interface (FMI)
Wekerle, Timo; Stjepandic, Josip; Pfouga, Alain; Blume, Claas
Conference Paper
2018Using OPC UA for Distributed Industrial Robot Control
Vick, Axel; Krüger, Jörg
Conference Paper
2018Using Transitive Relations for Automatic Creation of Consistent Traceability in Model-based Systems Engineering
Sünnetcioglu, Atakan; Stark, Rainer
Journal Article
2018Validierung von AM-Laser-Metal-Deposition Simulationen mittels in-situ Verzugsmessungen an der aufgebauten Geometrie
Biegler, Max
Conference Paper
2018Verschleißverhalten neuartiger Mikrofräswerkzeuge mit Schneiden aus CBN bei der Hartzerspanung
Uhlmann, Eckart; Polte, Julian; Polte, Mitchel; Kuche, Yves; Wiesner, Hagen Maximilian
Journal Article
2018VIB-SHP - Virtuelle Inbetriebnahme für Industrie 4.0 zukunftssicher beherrschen
: Stark, Rainer (Hrsg.); Müller, Patrick (Hrsg.); Grosser, Hendrik (Hrsg.)
Report
2018ViB-SHP-Entwicklungsprozess mit Baukästen
Lünnemann, Pascal; Mathes, Bernhard
Book Article
2018ViB-SHP-Konzept in den Dimensionen des Engineering Operating System
Lünnemann, Pascal
Book Article
2018Virtualization technologies in product development
Krems, S.; Reich, D.; Stark, R.
Conference Paper
2018Vision-based Identification Service for Remanufacturing Sorting
Schlüter, Marian; Niebuhr, Carsten; Lehr, Jan; Krüger, Jörg
Journal Article
2018Visual feedback for grasping in virtual reality environments for an interface to instruct digital human models
Geiger, Andreas; Bewersdorf, Imke; Brandenburg, Elisabeth; Stark, Rainer
Conference Paper
2018Visualizing trajectories for industrial robots from sampling-based path planning on mobile devices
Guhl, Jan; Vick, Axel; Vonasek, Vojtech; Krüger, Jörg
Conference Paper
2018Vorgehensmodell zur Methodenauswahl in Six-Sigma-Projekten
Ariza Alvarez, Julian Enrique
: Krüger, J.; Jochem, Roland; Woll, R.
Dissertation
2018Vorgehensweise zur Auslegung des Laserstrahlschmelzens am Beispiel von Wolframkarbid-Kobalt
Bergmann, André
: Rethmeier, Michael; Uhlmann, Eckart; Schmidt, Michael
Dissertation
2018Wear behaviour of HIPIMS coated micro-milling tools with cutting edge preparation for machining steel moulds
Uhlmann, Eckart; Kuche, Yves; Polte, Julian; Polte, Mitchel
Conference Paper
2018Wear Mechanisms of Ceramic Vibratory Finishing Media
Uhlmann, E.; Eulitz, A.
Journal Article
2018Weld pool shape observation in high power laser beam welding
Artinov, A.; Bakir, N.; Bachmann, M.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2018Werkzeug- und prozessseitige Grundlagen des Schienenschleifens unter Berücksichtigung der Schienentemperatur und der Wechselwirkung mit dem Einsatzverhalten der Schiene
Lypovka, Pavlo
: Uhlmann, Eckart
Dissertation
2018Wissensmanagement im Kontext von Industrie 4.0
Orth, Ronald; Steinhöfel, Erik; Galeitzke, Mila; Hecklau, Fabian
Journal Article
2018Wissensmanagement in Freien Berufen
Steinhöfel, Erik
Journal Article
2018The Working Posture Controller: Automated adaptation of the workpiece pose to enable a neutral working posture
Nguyen, The Duy
: Stark, Rainer; Krüger, Jörg; Deuse, Jochen
Dissertation