Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
202115. Berliner Runde. Neue Konzepte für Werkzeugmaschinen 2021. Begleitband
: Uhlmann, Eckart (Hrsg.); Drieux, Sophie (Red.); Triebel, Florian (Red.)
Conference Proceedings
2021AI-enhanced Identification, Inspection and Sorting for Reverse Logistics in Remanufacturing
Schlüter, M.; Lickert, H.; Schweitzer, K.; Bilge, P.; Briese, C.; Dietrich, F.; Krüger, J.
Journal Article
2021Analysis of influencing factors for the dressing process in double side face grinding
Uhlmann, E.; Lichtschlag, L.
Journal Article
2021Artefaktkorrektur für die 3D-Röntgenbildgebung auf Basis synthetischer Röntgenprojektionen
Melnik, Steffen
: Uhlmann, Eckart
Dissertation
2021Deutsche Normungsroadmap Innovative Arbeitswelt
Adolph, Lars; Albrecht, Philipp; Andersen, Thomas; Börkircher, Mikko; Meer, Jan de; Giertz, Jan-Paul; Jeske, Tim; Kagerer, Frank; Kirchhoff, Britta; Klimiont, Thomas; Minnerup, Jörg; Mühlbradt, Thomas; Müssigbrodt, Matthias; Orth, Ronald; Paproth, Yona; Preuße, Christoph; Richter, Christian; Schumacher, Simon; Senderek, Roman; Stock, Patricia; Tausch, Alina; Tegtmeier, Patricia; Ullrich, Carsten
Report
2021Digitale Unterstützung der aktiven Kundenintegration zur Optimierung der Produktentwicklung
Damerau, Thomas
: Stark, Rainer
Dissertation
2021The Effects of HLAW Parameters for One Side T-Joints in 15 mm Thickness Naval Steel
Churiaque, C.; Sánchez-Amaya, J.M.; Porrúa-Lara, M.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2021Effects on the distortion of Inconel 718 components along a hybrid laser-based additive manufacturing process chain using laser powder bed fusion and laser metal deposition
Uhlmann, E.; Düchting, J.; Petrat, T.; Krohmer, E.; Graf, B.; Rethmeier, M.
Journal Article
2021Einfluss des Post-Processings auf laserstrahlgeschmolzene Bauteile am Beispiel von ß-Titanlegierungen
Gerlitzky, Georg
: Uhlmann, Eckart
Dissertation
2021Einsatzverhalten keramisch gebundener Gleitschleifkörper
Eulitz, Alexander
: Uhlmann, Eckart
Dissertation
2021Ex Situ Residual Stress Analysis of Chemical Vapor Deposited Diamond Coated Cutting Tools by Synchrotron X-Ray Diffraction in Transmission Geometry
Hinzmann, D.; Böttcher, K.; Reimers, W.; Uhlmann, E.
Journal Article
2021Experimental investigation into the effect of supports and overhangs on accuracy and roughness in laser powder bed fusion
Mele, M.; Bergmann, A.; Campana, G.; Pilz, T.
Journal Article
2021Graphische Programmierung von Industrierobotern
Chemnitz, M.; Yordanova, M.; Vick, A.
Journal Article
2021How can the programming of impedance control be simplified?
Cruz, A.B.; Radke, M.; Haninger, K.; Krüger, J.
Journal Article
2021Influence of oscillating magnetic field on the keyhole stability in deep penetration laser beam welding
Üstündağ, Ö.; Bakir, N.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2021Interaktives Lagebild - Ein Werkzeug für das Krisenmanagement in prozessorientierten Unternehmen
Kohl, Holger; Knothe, Thomas; Oertwig, Nicole; Gering, Patrick; Scholz, Julia-Anne
Journal Article
2021Internal Stress Evolution and Subsurface Phase Transformation in Titanium Parts Manufactured by Laser Powder Bed Fusion - An In Situ X-Ray Diffraction Study
Schmeiser, F.; Krohmer, E.; Schell, N.; Uhlmann, E.; Reimers, W.
Journal Article
2021Lessons learned in intellectual capital management in Germany between 2000 and 2020 - History, applications, outlook
Bornemann, M.; Alwert, K.; Will, M.
Journal Article
2021Methodology to develop Digital Twins for energy efficient customizable IoT-Products
Riedelsheimer, T.; Gogineni, S.; Stark, R.
Journal Article
2021Modularized and Reconfigurable Machine Tool Frames based on Polyhedral Building Blocks
Peukert, Bernd Walter
: Uhlmann, Eckart
Dissertation
2021Patterns for Resilient Value Creation: Perspective of the German Electrical Industry during the COVID-19 Pandemic
Neumann, K.; Erp, T. Van; Steinhöfel, E.; Sieckmann, F.; Kohl, H.
Journal Article
2021Production in the loop - the interoperability of digital twins of the product and the production system
Vogt, A.; Schmidt, P.H.; Mayer, S.; Stark, R.
Journal Article
2021Progress for Life Cycle Sustainability Assessment by Means of Digital Lifecycle Twins - A Taxonomy
Riedelsheimer, T.; Neugebauer, S.; Lindow, K.
Book Article
2021Quantitative and qualitative comparison of morphometric outcomes after endoscopic and conventional correction of sagittal and metopic craniosynostosis versus control groups
Schulz, M.; Liebe-Püschel, L.; Seelbach, K.; Paulikat, L.; Fehlhaber, F.; Schwarz, K.; Blecher, C.; Thomale, U.-W.
Journal Article
2021Relative density prognosis for directed energy deposition with the help of artificial neural networks
Marko, A.; Schafner, A.; Raute, J.; Rethmeier, M.
Journal Article
2021Requirements-driven Identification and Validation of Reusable System and Development Elements
Sünnetcioglu, Atakan
Dissertation
2021Selbstoptimierendes System zur aktiven Schwingungskompensation in Werkzeugmaschinen
Mewis, Jan
Dissertation
2021Selection of diamond coated silicon nitrides for use as ceramic end mills when machining glass and carbon fiber reinforced plastics
Stawiszynski, B.; Protz, F.; Uhlmann, E.
Journal Article
2021Shielded metal arc welding of 9%Ni steel using matching ferritic filler metal
El-Batahgy, A.; Saiyah, A.; Khafagi, S.; Gumenyuk, A.; Gook, S.; Rethmeier, M.
Journal Article
2021Systematic Literature Review of System Models for Technical System Development
Schmidt, M.M.; Zimmermann, T.C.; Stark, R.
Review
2021Titanium Ti-6Al-4V alloy milling by applying industrial robots
Grisol de Melo, E.; Mohnke, C.; Polte, J.; Oliveira Gomes, J. de; Uhlmann, E.
Journal Article
2021Validation of Immersive Design Parameters in Driving Simulation Environments
Lyga, Y.; Lau, M.; Brandenburg, E.; Stark, R.
Conference Paper
20204th Industrial Revolution Design through Lean Foundation
Davis, N.; Companiwala, A.; Muschard, B.; Petrusch, N.
Journal Article
2020Analyzing the role of research and technology organizations (RTOs) in national innovation systems (NIS)
Hecklau, F.; Kidschun, F.; Kohl, H.; Tominaj, S.
Conference Paper
2020Application of additive manufactured tungsten carbide-cobalt electrodes with interior flushing channels in S-EDM
Uhlmann, E.; Polte, J.; Bolz, R.; Yabroudi, S.; Streckenbach, J.; Bergmann, A.
Journal Article
2020Applying Contextualization for Data-Driven Transformation in Manufacturing
Gogineni, S.; Lindow, K.; Nickel, J.; Stark, R.
Conference Paper
2020Assembly Issue Resolution System Using Machine Learning in Aero Engine Manufacturing
Brünnhäußer, J.; Gogineni, S.; Nickel, J.; Witte, H.; Stark, R.
Conference Paper
2020Assistenzsystem für die Entwicklung nachhaltiger Produkte
Buchert, Tom
: Kohl, H.; Stark, Rainer; Anderl, R.
Dissertation
2020Augmented learning for industrial education
Menn, J.P.; Severengiz, M.; Lorenz, A.K.; Wassermann, J.; Ulbrich, C.; Krüger, J.; Seliger, G.
Journal Article
2020Ausblick
Rimmelspacher, Sven O.; Kayser, Marco; Batzer, Jan; Gering, Patrick
Book Article
2020Automated continuous learn and improvement process of energy efficiency in manufacturing
Can, A.; Fisch, J.; Stephan, P.; Thiele, G.; Krüger, J.
Conference Paper
2020Automated Optical Inspection Using Anomaly Detection and Unsupervised Defect Clustering
Lehr, J.; Sargsyan, A.; Pape, M.; Philipps, J.; Krüger, J.
Conference Paper
2020Automated Tool‐Path Generation for Rapid Manufacturing of Additive Manufacturing Directed Energy Deposition Geometries
Biegler, Max; Wang, Jiahan; Kaiser, Lukas; Rethmeier, Michael
Journal Article
2020Avoidance of end crater imperfections at high-power laser beam welding of closed circumferential welds
Gook, Sergej; Üstündag, Ömer; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2020Avoidance of liquid metal embrittlement during resistance spot welding by heat input dependent hold time adaption
Böhne, C.; Meschut, G.; Biegler, M.; Rethmeier, M.
Journal Article
2020Building up a national network of applied R&D institutes in an emerging innovation system
Kohl, H.; Will, M.; Prim, M.F.; Pavim, A.X.
Journal Article
2020Characteristics and Skills of Leadership in the Context of Industry 4.0
Guzmán, V.E.; Muschard, B.; Gerolamo, M.; Kohl, H.; Rozenfeld, H.
Journal Article
2020Combine the best of two worlds. Experience in setting up the Sino-German Intelligent Manufacturing Research Institute (SGIMRI) in Nanjing
Knothe, Thomas
Presentation
2020A comparative analysis of ceramic and cemented carbide end mills
Dröder, K.; Karpuschewski, B.; Uhlmann, E.; Arrabiyeh, P.A.; Berger, D.; Busemann, S.; Hartig, J.; Madanchi, N.; Mahlfeld, G.; Sommerfeld, C.
Journal Article
2020Conceptualization of a Measurement Procedure for Determination of Characteristic Properties of SLM Produced Parts by Means of Computed Tomography
Uhlmann, E.; Saber, Y.
Journal Article
2020Condition monitoring concept for industrial Robots
Uhlmann, E.; Polte, J.; Geisert, C.
Conference Paper
2020Constant surface roughness over tool-lifetime due to online process monitoring and cutting parameter adaption in turning of gear steel
Uhlmann, E.; Holznagel, T.; Berardi, P.
Journal Article
2020Decentralised identification of used exchange parts with a mobile application
Lehr, J.; Schlüter, M.; Krüger, J.
Journal Article
2020Definition von Schwingungsparametern und Ermittlung der Auswirkungen bei der Bearbeitung
Uhlmann, E.; Zimmermann, S.; Thalau, J.
Journal Article
2020DEM-simulation of particle behaviour during cutting edge preparation of micro-milling tools by immersed tumbling
Uhlmann, E.; Polte, M.; Polte, J.; Kuche, Y.
Conference Paper
2020Demand-oriented barriers and potentials for remanufacturing in Vietnam
Guidat, T.; Wewer, A.; Kohl, H.; Seliger, G.
Journal Article
2020Design alternatives for internationally distributed learning factories in global production engineering
Schumacher, B.C.; Steinbach, A.; Vi, N.H.; Yükseltürk, A.; Kohl, H.; Krüger, J.; Quoc, H.N.
Journal Article
2020Design and hard machining of a high performance ceramic impeller
Uhlmann, E.; Polte, J.; Koprowski, S.; Kochan, J.; Borsoi Klein, T.
Conference Paper
2020Determining the shape of reflectance reference samples for curved surface reflectors
Lanevski, D.; Manoocheri, F.; Vaskuri, A.; Hameury, J.; Kersting, R.; Monte, C.; Adibekyan, A.; Kononogova, E.; Ikonen, E.
Journal Article
2020Deutsche Normungsroadmap Künstliche Intelligenz
Adler, R.; Kolomiichuk, Sergii; Hecker, Dirk; Lämmel, Philipp; Ma, Jackie; Marko, Angelina; Mock, Michael; Nagel, Tobias; Poretschkin, Maximilian; Rennoch, Axel; Röhler, Marcus; Ruf, Miriam; Schönhof, Raoul; Schneider, Martin A.; Tcholtchev, Nikolay; Ziehn, Jens; Böttinger, Konstantin; Jedlitschka, Andreas; Oala, Luis; Sperl, Philip; Wenzel, Markus; et. al.
: Wahlster, W.; Winterhalter, C.
Study
2020Development of a machining strategy for diamond slide burnishing burnishing tools made of polycrystalline diamond (PCD)
Uhlmann, E.; Polte, M.; Polte, J.; Kuche, Y.; Wendorf, S.; Siebel, D.
Conference Paper
2020Development of an Industrial Internet of Things Ontologies System
Fedotova, A.V.; Lindow, K.; Norbach, A.
Conference Paper
2020Development of monolithic ceramic milling tools for machining graphite
Uhlmann, E.; Polte, M.; Polte, J.; Kuche, Y.; Hocke, T.
Conference Paper
2020Development of Tool Paths for Multi-axis Single Stage Incremental Hole-flanging
Besong, L.I.; Buhl, J.; Ünsal, I.; Bambach, M.; Polte, M.; Blumberg, J.; Uhlmann, E.
Journal Article
2020Digital Twin Readiness Assessment
Riedelsheimer, Theresa; Lünnemann, Pascal; Wehking, Sebastian; Dorfhuber, Lisa
: Samarajiwa, Markus (Hrsg.); Lindow, Kai (Hrsg.); Salamon, David (Hrsg.); Stark, Rainer (Hrsg.)
Study
2020Digitalisation toolkit for SMEs
Gering, P.
Conference Paper
2020Die Digitalisierungshürde lässt sich Meister(n)
: Knothe, Thomas (Hrsg.); Gering, Patrick (Hrsg.); Rimmelspacher, Sven O. (Hrsg.); Maier, Michael (Hrsg.)
Scientific Anthology
2020Distortion-based validation of the heat treatment simulation of Directed Energy Deposition additive manufactured parts
El-Sari, B.; Biegler, M.; Graf, B.; Rethmeier, M.
Journal Article
2020Dry-ED milling of micro-scale contours with high-speed rotating tungsten tube electrodes
Uhlmann, E.; Perfilov, I.; Yabroudi, S.; Mevert, R.; Polte, M.
Journal Article
2020Dynamisches Werkzeugverhalten beim Bürstspanen mit gebundenem Schleifmittel
Hoyer, A.; Uhlmann, E.
Journal Article
2020Effectivity of Learning Factories to convey problem solving competencies
Sieckmann, F.; Petrusch, N.; Kohl, H.
Journal Article
2020Efficient abrasive water jet milling for near-net-shape fabrication of difficult-to-cut materials
Uhlmann, E.; Männel, C.; Braun, T.
Journal Article
2020Einflussgrößen des Schärfens beim Doppelseitenplanschleifen mit Planentenkinematik
Lichtschlag, L.; Uhlmann, E.
Journal Article
2020Einordnung
Hirsch-Kreinsen, Hartmut; Schumann, Monique; Scholz, Julia-Anne; Batzer, Jan; Gering, Patrick
Book Article
2020Einsatzverhalten keramischer Fräswerkzeuge bei der Zerspanung von glas- und kohlenstofffaserverstärkten Kunststoffen
Stawiszynski, Bartek
: Kohl, Holger; Uhlmann, Eckart; Biermann, Dirk
Dissertation
2020Electrical discharge dressing of honing stones
Uhlmann, E.; Yabroudi, S.; Zimmermann, S.; Gerlitzky, G.; Polte, M.; Klink, U.; Sihling, B.
Journal Article
2020Energy optimal set-points for coupled systems using their topology
Thiele, G.; Claus, R.; Johanni, T.; Krüger, J.
Conference Paper
2020An Ensemble Learning based Hierarchical Multi-label Classification Approach to Identify Impacts of Engineering Changes
Pan, Y.; Stark, R.
Conference Paper
2020Ensure OPC-UA interfaces for digital plug-and-produce
Jaekel, F.-W.; Wolff, T.; Happersberger, V.; Knothe, T.
Conference Paper
2020Entwicklung des hybriden Auftragschweißens als leistungsfähigen Beschichtungsprozess für Korrosions und Verschleißschutzschichten
Brunner-Schwer, Christian; Graf, Benjamin; Rethmeier, Michael
Journal Article
2020Entwicklung eines Assistenzsystems zur Konfiguration und Implementierung von GPS. GPS-Einführung in KMU der Pharmaindustrie
Sieckmann, F.; Kohl, H.
Journal Article
2020Evaluation Model for Mobility Design of Learning Factories
Petrusch, N.; Schliephack, W.; Kohl, H.
Journal Article
2020Experimental and numerical study on the influence of the laser hybrid parameters in partial penetration welding on the solidification cracking in the weld root
Bakir, N.; Üstündağ, Ö.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2020Experimental observation of stress formation during selective laser melting using in situ X-ray diffraction
Schmeiser, F.; Krohmer, E.; Schell, N.; Uhlmann, E.; Reimers, W.
Journal Article
2020Firma Klappdekelen - die Digitalisierungshürde lässt sich "Meister(n)"
Schumann, Monique
Book Article
2020Firma Klappdekelen - ein Jahr später
Schumann, Monique
Book Article
2020Fundamental research of applying tungsten carbide-cobalt as tool electrode material for sinking EDM
Uhlmann, E.; Polte, M.; Bolz, R.; Börnstein, J.
Journal Article
2020Geometric distortion-compensation via transient numerical simulation for directed energy deposition additive manufacturing
Biegler, M.; Elsner, B.A.M.; Graf, B.; Rethmeier, M.
Journal Article
2020Handlungsempfehlungen
Schneider, Benjamin; Kayser, Marco; Gelec, Erdem; Schweizer, Hartmut; Knothe, Thomas
Book Article
2020Haptic Interaction in Virtual Reality Environments for Manual Assembly Validation
Kind, S.; Geiger, A.; Kießling, N.; Schmitz, M.; Stark, R.
Journal Article
2020Humanzentrierte selbstorganisierende Produktion durch kontextsensitive Assistenz
Uhlmann, E.; Polte, J.; Beleke, A.; Mühlich, C.; Paeleke, L.; Epping, M.
Journal Article
2020Hybrid laser arc welding of thick high-strength pipeline steels of grade X120 with adapted heat input
Üstündag, Ömer; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2020Hybrid laser-arc welding of thick-walled pipe segments with optimization of the end crater
Üstündag, Ömer; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2020Hybrid-Prototype-in-the-Loop zum frühzeitigen Test der Beherrschbarkeit von Fahrerassistenzsystemen
Buchholz, Christian
: Göhlich, D.; Stark, Rainer; Vietor, T.
Dissertation
2020Impact of Platform Openness on Ecosystems and Value Streams in Platform-Based PSS Exemplified Using RAMI 4.0
Zambetti, M.; Blüher, T.; Pezzotta, G.; Exner, K.; Pinto, R.; Stark, R.
Conference Paper
2020Implementation with agile project management approaches: Case study of an industrie 4.0 learning factory in China
Scholz, J.-A.; Sieckmann, F.; Kohl, H.
Journal Article
2020In situ determination of the critical straining condition for solidification cracking during laser beam welding
Bakir, N.; Gumenyuk, A.; Pavlov, V.; Volvenko, S.; Rethmeier, M.
Journal Article
2020Increased efficiency and accuracy in ultra-precision machining through adapted CAM software
Uhlmann, E.; Polte, J.; Hein, C.; Kuche, Y.; Dörr, M.
Conference Paper
2020Increasing challenges for sustainability for manufacturing industry based on global, national and technological initiatives
Kohl, H.; Schliephack, W.; Muschard, B.
Journal Article
2020Industrial Robot Programming Methods: A Scoping Review
Heimann, O.; Guhl, J.
Conference Paper
2020Influence of electron beam welding parameters on the weld seam geometry of Inconel 718 at low feed rates
Raute, Julius; Jokisch, Torsten; Marko, Angelina; Biegler, Max; Rethmeier, Michael
Journal Article
2020Influence of the fatty acid profile on the lubricating film formation in micro-milling process on 7050-T7451 aluminum alloy
Chanes de Souza, M.; Wiesner, H.M.; Kuche, Y.; Polte, J.; Oliveira Gomes, J. de; Uhlmann, E.
Journal Article
2020Integrated enterprise modelling to achieve interoperability
Jaekel, F.-W.
Conference Paper
2020Integrated strategy development based on intangibles
Will, M.
Book Article
2020Integration von ISO 9001:2015 und Ganzheitlichen Produktionssystemen
Kohl, Holger; Neumann, Konstantin
Journal Article
2020Intuitive Werkzeuge für ein durchgehendes Engineering. Technologieintegrierte Fabrikplanung für KMU
Glodde, Ilona; Scholz, Hannes; Knothe, Thomas; Kohl, Holger
Journal Article
2020Investigation of micromilled tool steel H13 using tungsten carbide micro-end mills
Manso, C.S.; Thom, S.; Uhlmann, E.; Assis, C.L.F. de; Conte, E.G. del
Journal Article
2020Investigation of the application of a C-ring geometry to validate the stress relief heat treatment simulation of additive manufactured austenitic stainless steel parts via displacement
El-Sari, B.; Biegler, M.; Rethmeier, M.
Journal Article
2020Investigation of the Metallurgical and Thermo-Mechanical Factors Influencing Centreline Solidification Cracking by Laser Beam and Hybrid Welding
Quiroz Penaranda, Vanessa
Dissertation
2020IoT-T
Rennoch, Axel; Jäkel, Frank-Walter; Hackel, Sascha; Stomber, Jens; Stölzle, Stefan; Wardaschka, Andre; Kaiser, Alexander
Report
2020Issues in distributed Engineering of SMEs over the Collaboration Life Cycle
Blüher, T.; Randermann, M.; Rosa, M.; Stark, R.; Jochem, R.
Journal Article
2020JUMP Planner
Rimmelspacher, Sven O.; Gering, Patrick; Lemcke, Anne; Schneider, Benjamin
Book Article
2020A laser powder bed fusion system for in situ x-ray diffraction with high-energy synchrotron radiation
Uhlmann, E.; Krohmer, E.; Schmeiser, F.; Schell, N.; Reimers, W.
Journal Article
2020Laser surface hardening of engine camshaft cams
Lasota, I.; Protsenko, V.; Matyushkin, A.; Kuznetsov, M.; Gook, S.
Journal Article
2020Laser welding of Inconel 718 nickel-based alloy layer-by-layer products
Voropaev, Alexander; Stramko, Maxim; Sorokin, Alexander; Logachev, Ivan; Kuznetsov, Mikhail; Gook, Sergej
Journal Article
2020Laser-Plasma-Auftragschweißen als hybrides Beschichtungsverfahren für hohe Auftragsraten mit geringer thermischer Belastung. Abschlussbericht
Brunner-Schwer, Christian
Report
2020Learning Environment for Introduction in Discrete-Event Simulation for Design and Improvement of New and Existing Material Flow Systems
Schumacher, B.C.; Kohl, H.
Conference Paper
2020Learning factory for digitization of enterprises
Rieckmann, J.M.; Knothe, T.
Conference Paper
2020Literature review of quality attributes for collaborative product development
Randermann, M.; Blüher, T.; Jochem, R.; Stark, R.
Journal Article
2020LiViTo: Linguistic and visual features tool for assisted analysis of historic manuscripts
Müller, K.; Tikhonov, A.; Meyer, R.
Conference Paper
2020LMD coatings as filler material for laser beam welded 30 mm thick plates
Straße, A.; Üstündag, Ö.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2020Low-Cost Embedded Vision for Industrial Robots: A Modular End-of-Arm Concept
Kroeger, Ole; Wollschläger, Felix; Krüger, Jörg
Conference Paper
2020Management von Innovationsnetzwerken unter Fokussierung von Kollaboration
Cap, Jan-Patrick
: Kohl, Holger
Dissertation
2020Maturity Assessment in Industry 4.0 - A Comparative Analysis of Brazilian and German Companies
Moura, L.R.; Kohl, H.
Journal Article
2020Mechanical Properties Characterization of Welded Automotive Steels
Javaheri, E.; Lubritz, J.; Graf, B.; Rethmeier, M.
Journal Article
2020Model-Based Systems Engineering (MBSE) as computer-supported approach for cooperative systems development
Schmidt, Marvin M.; Stark, Rainer
Conference Paper
2020Modellierung mit MO²GO und Erzeugung eines IEC-konformen Datenoutputs
Schweizer, Hartmut; Gering, Patrick
Book Article
2020Modelling of a thermoelectric self-cooling system based on thermal resistance networks for linear direct drives in machine tools
Uhlmann, E.; Salein, S.; Polte, M.; Triebel, F.
Journal Article
2020Modular virtual reality to enable efficient user studies for autonomous driving
Konkol, K.; Brandenburg, E.; Stark, R.
Conference Paper
2020Natural Virtual Reality User Interface to Define Assembly Sequences for Digital Human Models
Geiger, A.; Brandenburg, E.; Stark, R.
Journal Article
2020Networked Visual Servoing as Use-Case for Cloud-based Industrial Robot Control
Vick, A.; Krause, C.; Krüger, J.
Conference Paper
2020Neueste Entwicklungen im Bereich des Hochleistungslaserstrahl- und Hybridschweißens von hohen Blechdicken
Üstündag, Ömer; Bakir, Nasim; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2020Notch impact toughness of laser beam welded thick sheets of cryogenic nickel alloyed steel X8Ni9
Gook, S.; Krieger, S.; Gumenyuk, A.; El-Batahgy, A.M.; Rethmeier, M.
Journal Article
2020Numerical study of additional element transport in wire feed laser beam welding
Meng, X.; Artinov, A.; Bachmann, M.; Rethmeier, M.
Journal Article
2020Numerische Simulation im 3D-Druck. Simulationsgestützte Verzugskompensation reduziert den Nachbearbeitungsaufwand und vermeidet Bauabbrüche im DED Additive Manufacturing
Biegler, Max; Rethmeier, Michael
Journal Article
2020On the relationship between the bulge effect and the hot cracking formation during deep penetration laser beam welding
Artinov, A.; Bachmann, M.; Meng, X.; Karkhin, V.; Rethmeier, M.
Journal Article
2020Online process control and self-configuration of turning operations
Uhlmann, E.; Holznagel, T.; Alavi, R.M.
Journal Article
2020OPC-UA based IIoT and CPS interoperability validation
Jaekel, F.-W.
Conference Paper
2020OPEN.Effect. Effectiveness of open-source hardware in times of a pandemic
Gogineni, Sonika; Tanrikulu, Cansu; Konietzko, Erik Paul; Lindow, Kai; Read, Robert L.
Study
2020An optimal algorithm for the robotic assembly system design problem: An industrial case study
Hagemann, S.; Stark, R.
Journal Article
2020Optimising the grinding wheel design for flute grinding processes utilising numerical analysis of the complex contact conditions
Uhlmann, E.; Gülzow, B.; Muthulingam, A.
Journal Article
2020Optimization with the evolution strategy by example of electrical-discharge drilling
Streckenbach, J.; Koref, I.S.; Rechenberg, I.; Uhlmann, E.
Journal Article
2020Organizational planning for quality management in the digital age
Behmer, F.J.; Jochem, R.
Journal Article
2020Oxidized tool electrodes for optimized electro-discharge drilling
Uhlmann, E.; Polte, M.; Streckenbach, J.; Dinh, N.C.; Börnstein, J.; Wolf, C.-S.; Camin, B.
Conference Paper
2020Potentials and challenges of Smart Products and related business models
Wang, W.M.; Lünnemann, P.; Klemichen, A.; Blüher, T.; Stark, R.
Conference Paper
2020Preclinical In Vitro Assessment of Submicron-Scale Laser Surface Texturing on Ti6Al4V
Schweitzer, L.; Cunha, A.; Pereira, T.; Mika, K.; Rego, A.M.B. Do; Ferraria, A.M.; Kieburg, H.; Geissler, S.; Uhlmann, E.; Schoon, J.
Journal Article
2020Prevention of liquid metal embrittlement cracks in resistance spot welds by adaption of electrode geometry
Böhne, Christoph; Meschut, Gerson; Biegler, Max; Frei, Julian; Rethmeier, Michael
Journal Article
2020Process behaviour of micro-textured CVD diamond thick film cutting tools during turning of Ti-6Al-4V
Uhlmann, E.; Schröter, D.
Journal Article
2020Process data based Anomaly detection in distributed energy generation using Neural Networks
Klein, M.; Thiele, G.; Fono, A.; Khorsandi, N.; Schade, D.; Krüger, J.
Conference Paper
2020Prozessmanagement für KMU
Oertwig, Nicole; Gering, Patrick; Knothe, Thomas
Book Article
2020Prozessüberwachung durch Objekterkennung - Automatisierte Werkzeugverschleißmessung beim robotergeführten Gleitschleifen
Kopp, M.; Uhlmann, E.
Journal Article
2020Qualification of computational welding mechanics approaches for simulation of directed energy deposition
Biegler, Max Robert
: Rethmeier, Michael
Dissertation
2020Quantifying mechanical properties of automotive steels with deep learning based computer vision algorithms
Javaheri, E.; Kumala, V.; Javaheri, A.; Rawassizadeh, R.; Lubritz, J.; Graf, B.; Rethmeier, M.
Journal Article
2020Reduktion thermisch bedingter Verlagerungen durch Integration von Peltierelementen in eine Hochfrequenzmotorspindel
Uhlmann, E.; Salein, S.; Iden, N.; Polte, J.; Temme, P.; Hartung, D.; Perschewski, S.
Journal Article
2020Reproduzierbare Optimierung des funkenerosiven Bohrens
Uhlmann, E.; Polte, M.; Streckenbach, J.; Osmanovic, M.; Börnstein, J.
Journal Article
2020Research on new energy automobile manufacturing service derivatization based on TRIZ
Wan, H.; Rieckmann, J.M.; Zhang, Q.; Ping, Q.
Journal Article
2020Roboterprogrammierung vereinfachen
Guhl, J.; Heimann, O.; Krüger, J.
Journal Article
2020Robust system identification for hysteresis-controlled devices using SINDy
Schreck, G.; Thiele, G.; Fey, A.; Krüger, J.
Conference Paper
2020Safe high impedance control of a series-elastic actuator with a disturbance observer
Haninger, K.; Asignacion, A.; Oh, S.
Conference Paper
2020Schnell erholen dank Resilienz im Unternehmen
Knothe, Thomas; Scholz, Julia-Anne; Oertwig, Nicole; Petrusch, Natalie
Journal Article
2020Serious Game on Factory Planning for Higher Education
Severengiz, M.; Seliger, G.; Krüger, J.
Journal Article
2020Smart hybrid prototyping in manual automotive assembly validation
Wolf, B.; Kind, S.; Stark, R.
Journal Article
2020Sortierung von Objekten in mikrofluidischen Systemen auf Basis von piezogetriebenen Aktoren
Horbert, Peter Paul
: Meyer, H.J.; Uhlmann, E.; Henkel, T.
Dissertation
2020Standardisation of Practices in Open Source Hardware
Bonvoisin, Jérémy; Molloy, Jenny; Häuer, Martin; Wenzel, Tobias
Journal Article
2020Stufenmodell zur Strukturierung digitaler Assistenzfunktionen: Digital assistierte Montageplanung
Bußwinkel, L.; Hauk, J.-C.; Schneider, H.; Stark, R.
Journal Article
2020Surface Finishing of Zirconium Dioxide with Abrasive Brushing Tools
Uhlmann, E.; Hoyer, A.
Journal Article
2020Sustainable Corporate Development: A Resource-Oriented Approach
Orth, Ronald; Kohl, Holger; Galeitzke, Mila
Book Article
2020Sustainable engineering master module - insights from three cohorts of European engineering team
Gladysz, B.; Urgo, M.; Stock, T.; Haskins, C.; Sieckmann, F.; Jarzebowska, E.; Kohl, H.; Strandhagen, J.O.; Tollio, T.
Journal Article
2020System identification of a hysteresis-controlled pump system using SINDy
Thiele, G.; Fey, A.; Sommer, D.; Krüger, J.
Conference Paper
2020Systematic literature review-Effects of PSS on sustainability based on use case assessments
Blüher, T.; Riedelsheimer, T.; Gogineni, S.; Klemichen, A.; Stark, R.
Journal Article
2020Tool wear prevention in ultra-precision polymer machining
Uhlmann, E.; Fang, F.; Polte, J.; Hein, C.; Lai, M.; Dörr, M.; Jahnke, C.
Conference Paper
2020Towards a Reference Model for Knowledge Driven Data Provision Processes
Wang, W.M.; Preidel, M.; Fachbach, B.; Stark, R.
Conference Paper
2020Towards an AI-Enhanced Circular Economy. AI-enhanced identification, inspection and sorting for reverse logistics
Schlüter, Marian
Presentation
2020Towards Deep Learning in Industrial Applications Taking Advantage of Service-Oriented Architectures
Briese, C.; Schlüter, M.; Lehr, J.; Maurer, K.; Krüger, J.
Journal Article
2020Trochoid milling with industrial robots
Uhlmann, E.; Reinkober, S.; Hoffmann, M.; Käpernick, P.
Journal Article
2020Untersuchung zum Elektronenstrahlschweißen heißrissgefährdeter Nickelbasis-Superlegierungen mittels statistischer Versuchsplanung
Raute, Julius; Jokisch, Torsten; Marko, Angelina; Rethmeier, Michael
Conference Paper
2020UrbanTSN - Automatisierung mit Echtzeit-Internet
Chemnitz, Moritz; Wolff, Tobias; Vick, Axel
Journal Article
2020Ursachenanalyse zur Verfügbarkeitssteigerung von Werkzeugmaschinen
Uhlmann, E.; Dumitrescu, R.; Polte, J.; Meyer, M.; Simsek, D.
Journal Article
2020User centered development of a digital twin concept with focus on sustainability in the clothing industry
Riedelsheimer, T.; Dorfhuber, L.; Stark, R.
Journal Article
2020Veränderte Kompetenzanforderungen im Rahmen von Digitalisierung und Industrie 4.0
Hecklau, F.; Orth, R.; Kidschun, F.; Tominaj, S.
Conference Paper
2020Verfahren zum fehlerfreien Laserstrahl-Hybridschweißen von geschlossenen Rundnähten
Gook, Sergej; Üstündag, Ömer; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2020Verfügbarkeitssteigerung durch gezielte Datenanalyse
Uhlmann, E.
Journal Article
2020Wear evaluation of CVD diamond coated high-performance drilling tools for machining of carbon fiber reinforced plastics (CFRP)
Uhlmann, E.; Reimers, W.; Hinzmann, D.; Christiansen, G.; Böttcher, K.
Journal Article
2020Wiederverwendung von Funktionsgruppen im Unikatbau
Zimmermann, Thomas C.; Schmidt, Marvin M.
Journal Article
2019 Elektromechanisches Glattwalzen von Stahllegierungen
Uhlmann, E.; Thom, S.; Prasol, L.; Haberbosch, K.; Drieux, S.
Journal Article
20193-Achs-Portalfräsmaschine als Demonstrator für ein modulares Werkzeugmaschinengestell
Uhlmann, E.; Polte, M.; Blumberg, J.; Peukert, B.
Journal Article
20194G/5G-Campusnetze und FTS-Einsatz
Chemnitz, Moritz; Vick, Axel; Lambrecht, Jens
Journal Article
2019Agent-based simulation for production planning and control in consideration of disruption events
Bui, M.D.; Nguyen, Q.H.; Kohl, H.
Conference Paper
2019Anforderungsaufnahme an IoT Tests für CoAP, MQTT und OPC‐UA
Jäkel, Frank-Walter; Wolff, Tobias; Alexander Kaiser; Hackel, Sascha; Rennoch, Axel; Wardaschka, Andre
Report
2019Application example: Assessment of the technological maturity of Brazilian innovation institutes
Hecklau, F.; Kidschun, F.; Will, M.; Kohl, H.; Prim, M.F.; Pavim, A.X.; Oliveira, J.E.
Conference Paper
2019Application of industrial methods in engineering education
Kind, S.; Dybov, A.; Buchholz, C.; Stark, R.
Conference Paper
2019Application of laser surface nanotexturing for the reduction of peri-implantitis on biomedical grade 5 Ti-6Al-4V dental abutments
Uhlmann, E.; Schweitzer, L.; Cunha, A.; Polte, J.; Huth-Herms, K.; Kieburg, H.; Hesse, B.
Conference Paper
2019Application of niobium carbide based cutting materials for peripheral milling of CFRP
Uhlmann, E.; Meier, P.; Hinzmann, D.
Journal Article
2019Approaching Knowledge Dynamics Across the Product Development Process with Methods of Social Research
Wang, W.M.; Mörike, F.; Hergesell, J.; Baur, N.; Feufel, M.; Stark, R.
Journal Article
2019Assessment of thermal cycles by combining thermo-fluid dynamics and heat conduction in keyhole mode welding processes
Artinov, A.; Karkhin, V.; Khomich, P.; Bachmann, M.; Rethmeier, M.
Journal Article
2019Automated tool-path generation for rapid manufacturing and numerical simulation of additive manufacturing LMD geometries
Biegler, Max; Wang, Jiahan; Graf, Benjamin; Rethmeier, Michael
Conference Paper
2019An automatic calibration approach for a multi-camera-robot system
Kroeger, Ole; Hügle, Johannes; Niebuhr, Carsten A.
Conference Paper
2019Automatically welded tubular X-joiuts
Schaumann, P.; Schürmann, K.; Pirtner, A.; Rethmeier, M.
Conference Paper
2019Automatized 3D-scanning application for the virtualization of large components
Mönchinger, Stephan; Schmidt, Marvin M.; Dreßen, Sebastian; Wissmann, Patrick; Stark, Rainer
Conference Paper
2019Avoidance of End Crater Imperfections at High-Power Laser Beam Welding of Closed Circumferential Welds
Gook, Sergej; Üstündag, Ömer; Gumenyuk, Andrey; Rethmeier, Michael
Presentation
2019Belt grinding of cast iron without cooling lubricant
Uhlmann, E.; Buelter, M.
Journal Article
2019Best Practice Example 12. LEAN-Factory for a pharmaceutical Company in Berlin, Germany
Kohl, Holger; Jochem, Roland; Sieckmann, Felix; Rybski, Christoffer
Book Article
2019Bounded Collision Force by the Sobolev Norm: Compliance and Control for Interactive Robots
Haninger, Kevin; Surdilovic, Dragoljub
Conference Paper
2019Classification of Similar Objects of Different Sizes Using a Reference Object by Means of Convolutional Neural Networks
Lehr, Jan; Schlüter, Marian; Krüger, Jörg
Conference Paper
2019Cognitive Edge for Factory
Lambrecht, Jens; Steffens, Ernst Joachim; Geitz, Marc; Vick, Axel; Funk, Eugen; Steigerwald, Wolfgang
Conference Paper
2019Combining the Advantages of On- and Offline Industrial Robot Programming
Guhl, Jan; Nikoleizig, Sylvio; Heimann, Oliver; Hügle, Johannes; Krüger, Jörg
Conference Paper
2019Configuration Equilibrium Model of Product Variant Design Driven by Customer Requirements
Yang, Q.; Bian, X.; Stark, R.; Fresemann, C.; Song, F.
Journal Article
2019Cucumber detection for precision agriculture applications
Fernandez, R.; Aliende, V.; Gonzalez-De-Santos, P.; Armada, M.; Surdilovic, J.; Surdilovic, D.
Conference Paper
2019Cutting force prediction in micro-milling considering the cutting edge micro-geometry
Uhlmann, E.; Polte, J.; Wiesner, H.M.; Kuche, Y.; Polte, M.
Conference Paper
2019CVD-Diamantwerkzeuge mit SiC-Zwischenschicht
Uhlmann, E.; Barth, E.; Gäbler, J.; Höfer, M.
Journal Article
2019Data preparation for data analytics (DPDA)
Stark, Rainer; Deuse, Jochen; Damerau, Thomas; Reckelkamm, Thorsten; Lindow, Kai
Journal Article
2019Data Preparation for Data Analytics (DPDA)
Reckelkamm, Thorsten; Damerau, Thomas
Journal Article
2019Datengetriebene Anwendungserstellung
Fraas, Philipp; Thierse, Paul; Chemnitz, Moritz
Book Article
2019Datenvorbereitung für KI - Herausforderungen und Lösungen
Damerau, Thomas
Conference Paper
2019Deep learning for part identification based on inherent features
Krüger, Jörg; Lehr, Jan; Schlüter, Marian; Bischoff, Nils
Journal Article
2019Development and operation of Digital Twins for technical systems and services
Stark, Rainer; Fresemann, Carina; Lindow, Kai
Journal Article
2019Development capabilities for smart products
Tomiyama, T.; Lutters, E.; Stark, R.; Abramovici, M.
Journal Article
2019Development of a Fire Detection Based on the Analysis of Video Data by Means of Convolutional Neural Networks
Lehr, Jan; Gerson, Christian; Ajami, Mohamad; Krüger, Jörg
Conference Paper
2019Development of a novel optical measurement technique to investigate the hot cracking susceptibility during laser beam welding
Bakir, N.; Pavlov, V.; Zavjalov, S.; Volvenko, S.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2019Development of an organizational structure model as a basis for the assessment of the digital transformation of organizations
Kidschun, F.; Hecklau, F.; Orth, R.; Wackernagel, J.P.; Singer, K.
Conference Paper
2019Die-sinking EDM of a SiC-boride-composite
Uhlmann, E.; Polte, J.; Jahnke, C.; Wolf, C.-S.; Degenhardt, U.
Conference Paper
2019Digital integrierte Produktion. Lösungen aus Berlin / Brandenburg. Vorträge / Proceedings PTK 2019
: Uhlmann, Eckart (Hrsg.)
Conference Proceedings
2019Digital Twin
Stark, Rainer; Damerau, Thomas
Book Article
2019Digitaler Zwilling für Smart Services
Exner, Konrad; Preidel, Maurice; Gogineni, Sonika; Stark, Rainer
Journal Article
2019Drei Zukunftsszenarien. Additive Fertigung im Jahr 2025 in Deutschland
Riemer, Annamaria; Döbel, Inga; Welz, Juliane; Knitsch, Valentin; Bergmann, André; Giebitz, Danny; Schüll, Elmar
Book
2019Ecological and functional optimization of the pretreatment process for plasma based coatings of cutting tools
Uhlmann, E.; Riemer, H.; An, S.; Fröhlich, M.; Paschke, H.; Petersen, M.
Journal Article
2019Einfluss der Schärfparameter auf die Schleifscheibentopographie
Uhlmann, E.; Muthulingam, A.
Journal Article
2019Einsatzverhalten von CVD-Diamantdünnschichtwerkzeugen
Uhlmann, E.; Hinzmann, D.
Journal Article
2019Energieeffizienz in der intelligenten Fabrik
Thiele, Gregor; Grabowski, K.; Krüger, J.
Journal Article
2019Energy Efficiency Optimization using AutomationML modeling and an EnPI methodology
Thiele, Gregor; Khorsandi, Niloufar; Krüger, Jörg
Conference Paper
2019Enterprise Interoperability VIII: Smart Services and Business Impact of Enterprise Interoperability
: Popplewell, Keith; Thoben, Klaus-Dieter; Knothe, Thomas; Poler, R.
Conference Proceedings
2019Entwicklung eines methodengestützten Vorgehensmodells für das Qualitätsmanagement Reporting (QMR)
Gruber, Tobias
: Krüger, Jörg; Jochem, Roland
Dissertation
2019European standardization of innovation management: The sufficiency of the CEN/TS 16555 in the 6th generation of innovation management
Cap, J.-P.; Hinzmann, F.; Kohl, H.; Orth, R.
Conference Paper
2019Experimental and numerical assessment of weld pool behavior and final microstructure in wire feed laser beam welding with electromagnetic stirring
Meng, X.; Bachmann, M.; Artinov, A.; Rethmeier, M.
Journal Article
2019Fallbasierte Feinplanung im Rahmen der kurzfristigen Fertigungssteuerung
Arlt, Reinhard
: Jochem, Roland; Kohl, Holger; Specht, D.; Mertins, K.
Dissertation
2019Framework for energy efficiency optimization of industrial systems based on the Control Layer Model
Thiele, Gregor; Heimann, Oliver; Grabowski, Knut; Küger, Jörg
Journal Article
2019Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik. Jahresbericht 2018/2019
 
Annual Report
2019From process to activity in the data flow
Lünnemann, Pascal; Riedelsheimer, Theresa; Wehking, Sebastian; Lindow, Kai
Journal Article
2019Für Betreiber von Smarten Fabriken ist Interoperabilität entscheidend
Jäkel, Frank-Walter
Book Article
2019Gestaltungsrichtlinien für die Visualisierung von Produktinformationen in der virtuellen Umgebung CAVE zur Unterstützung von Design Review Teams
Brandenburg, Elisabeth
: Krüger, J.; Stark, Rainer; Thüring, M.
Dissertation
2019Heat treatment of SLM-LMD hybrid components
Uhlmann, Eckart; Düchting, Jan; Petrat, Torsten; Graf, Benjamin; Rethmeier, Michael
Conference Paper
2019Herausforderungen in der Mikrozerspanung
Kuche, Yves; Eckert, Udo
Presentation
2019Highspeed-Plasma-Laser-Cladding (HPLC) als hybrides Beschichtungsverfahren: Evaluierung des Einsatzpotentials für hohe Prozessgeschwindigkeiten
Brunner-Schwer, Christian; Schreiber, Frank; Graf, Benjamin; Rethmeier, Michael
Conference Paper
2019Highspeed-plasma-laser-cladding of thin wear resistance coatings: A process approach as a hybrid metal deposition-technology
Brunner-Schwer, Christian; Petrat, Torsten; Graf, Benjamin; Rethmeier, Michael
Journal Article
2019Hochleistungsbohrwerkzeuge für CFK
Uhlmann, E.; Christiansen, G.; Reimers, W.; Brömmelhoff, K.
Journal Article
2019Hybrid artificial intelligence system for the design of highly-automated production systems
Hagemann, S.; Sünnetcioglu, A.; Stark, R.
Journal Article
2019Hybrid laser arc welding of thick plates X8Ni9 for LNG tank construction
Gook, Sergej; El-Batahgy, A-M.; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2019Implementation of an Energy Metering System for Smart Production
Halstenberg, Friedrich A.; Lindow, Kai; Stark, Rainer
Book Article
2019Improvement of filler wire dilution using external oscillating magnetic field at full penetration hybrid laser-arc welding of thick materials
Üstündag, Ömer; Avilov, Vjaceslav; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2019Improvement of numerical simulation model setup and calculation time in additive manufacturing-laser-metal-deposition components with an advanced modelling strategy
Biegler, Max; Khazan, Pavel; Gatzen, Marius; Rethmeier, Michael
Conference Paper
2019In-Situ-Kraftmessung bei variablen Werkzeugwinkeln
Uhlmann, Eckart; Uhlemann, Sebastian; Kochan, Jaroslaw
Journal Article
2019In-Situ-Kraftmessung bei variablen Werkzeugwinkeln
Uhlmann, Eckart; Uhlemann, Sebastian; Kochan, Jaroslaw
Journal Article
2019Increasing resource efficiency with an engineering decision support system for comparison of product design variants
Buchert, Tom; Ko, Nathanael; Graf, Roberta; Vollmer, Thomas; Alkhayat, Moritz; Brandenburg, Elisabeth; Stark, Rainer; Klocke, Fritz; Leistner, Philip; Schleifenbaum, Johannes Henrich
Journal Article
2019Increasing the productivity and quality of flute grinding processes through the use of layered grinding wheels
Uhlmann, E.; Schroer, N.; Muthulingam, A.; Gulzow, B.
Journal Article
2019Integrating model checking and model based testing for industrial software development
Villani, E.; Pontes, R.P.; Coracini, G.K.; Ambrosio, A.M.
Journal Article
2019Integration of Active Pharmaceutical Ingredient production into a pharmaceutical Lean Learning Factory
Petrusch, N.; Sieckmann, F.; Menn, J.P.; Kohl, H.
Journal Article
2019Integration of automated structure mechanic analyses into production process simulation
Schmitz, M.B.; Stark, R.
Conference Paper
2019Interaction of tool and workpiece in ultrasonic-assisted grinding of high performance ceramics
Uhlmann, E.; Bruckhoff, J.
Journal Article
2019Introducing Product Service System Architectures for realizing Circular Economy
Halstenberg, F.A.; Stark, R.
Journal Article
2019Investigation of liquid metal embrittlement of dual phase steel joints by electro-thermomechanical spot-welding simulation
Frei, Julian; Biegler, Max; Rethmeier, Michael; Böhne, Christoph; Meschut, Gerson
Journal Article
2019Investigation of the mechanical properties of single-pass hybrid laser-arc welded thick X120 pipeline steel plates
Üstündag, Ömer; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2019Investigation on the effect of novel cutting fluids with modified ingredients regarding the long-term resistance of polycarbonate used as machine guards in cutting operations (KSS-PC)
Uhlmann, E.; Haberbosch, K.; Thom, S.; Drieux, S.; Schwarze, A.; Polte, M.
Conference Paper
2019Keine Angst vor Industrie 4.0! - Vier Maßnahmen zur Vorbereitung von Unternehmen auf die neuen Anforderungen menschlicher Arbeit in der Industrie 4.0
Kohl, Holger; Knothe, Thomas; Schallock, Burkhard; Scholz, Julia-Anne
Journal Article
2019Künstliche Intelligenz zum Schutz sicherheitskritischer Energie-Infrastrukturen
Klein, M.; Thiele, Gregor; Krüger, J.
Journal Article
2019Laser Welding of SLM-Manufactured Tubes Made of IN625 and IN718
Jokisch, Torsten; Marko, Angelina; Gook, Sergej; Üstündag, Ömer; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2019Laserhybridschweißen von dickwandigen Stählen mit elektromagnetischer Schmelzbadunterstützung
Gumenyuk, Andrey; Üstündag, Ömer; Gook, Sergej; Rethmeier, Michael
Conference Paper
2019Lean-Methoden und ISO 9001:2015 - Geht das zusammen?
Kohl, Holger; Neumann, Konstantin
Journal Article
2019Leveraging circular economy through a methodology for smart service systems engineering
Halstenberg, F.A.; Lindow, K.; Stark, R.
Journal Article
2019Liquid Metal Embrittlement of Advanced High Strength Steels during Resistance Spot Welding
Frei, Julian
: Krüger, J.; Rethmeier, M.; Jüttner, S.
Dissertation
2019Literature review: Impact assessment of innovation networks
Haunschild, J.; Tsog, S.
Conference Paper
2019Low heat input gas metal arc welding for dissimilar metal weld overlays part III: Hydrogen-assisted cracking susceptibility
Frei, Julian; Alexandrov, Boian T.; Rethmeier, Michael
Journal Article
2019Lücken und Herausforderungen bei der praktischen Umsetzung des Model-Based Systems Engineering
Fresemann, C.; Stark, R.; Sauer, C.; Schleich, B.; Wartzack, S.
Journal Article
2019Manufacturing of graphite electrodes with high geometrical requirements
Uhlmann, E.; Kuche, Y.; Polte, J.; Polte, M.
Conference Paper
2019Mechanical properties characterization of resistance spot welded DP1000 steel under uniaxial tensile tests
Javaheri, E.; Pittner, A.; Graf, B.; Rethmeier, M.
Journal Article
2019Mechanical Properties of Single-pass Hybrid Laser Arc Welded 25 mm Thick-walled Structures Made of Fine-grained Structural Steel
Üstündag, Ömer; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2019Merkmalbasiertes Nutzerunterstützungssystem für die Erfassung von Bauteilen mittels industrieller Computertomographie
Sawczyn, Nikolas
: Hilgenberg, K.; Uhlmann, Eckart; Karpuschewski, B.
Dissertation
2019A method to design Smart Services based on information categorization of industrial use cases
Exner, Konrad; Smolka, Elisa; Blüher, Till; Stark, Rainer
Journal Article
2019Micro-cutting of a MMC-composite for enhanced injection moulds
Uhlmann, E.; Polte, M.; Hein, C.; Polte, J.; Jahnke, C.
Conference Paper
2019Microstructure of Inconel 718 parts with constant mass energy input manufactured with direct energy deposition
Petrat, Torsten; Brunner-Schwer, Christian; Graf, Benjamin; Rethmeier, Michael
Journal Article
2019Mikrofräsbearbeitung von MMC-Werkstoffschichten unter Einsatz von binderlosem PKD. Analyse des Einflusses der Prozessparameter auf den Mikrofräsprozess
Hein, C.; Uhlmann, E.; Polte, J.; Wiesner, H.M.; Jahnke, C.; Polte, M.
Journal Article
2019Mikrostrukturierte CVD-Diamant-Werkzeuge
Bachmann, H.; Meier, P.; Uhlmann, E.; Schröter, D.
Journal Article
2019Modelling of Abrasive Water Jet Cutting with Controlled Depth for Near-Net-Shape Fabrication
Uhlmann, E.; Männel, C.
Journal Article
2019Modelling of brushing processes
Sommerfeld, C.; Uhlmann, E.; Hoyer, A.
Conference Paper
2019Multi level network management - A method for managing inter-organizational innovation networks
Cap, J.-P.; Blaich, E.; Kohl, H.; Raesfeld, A. von; Harms, R.; Will, M.
Journal Article
2019Nachbearbeitung additiv gefertigter Titanbauteile - Potentiale des Fliehkraftgleitschleifens
Uhlmann, E.; Eulitz, A.; Seiffert, K.; Kersting, R.; Schenk, S.
Journal Article
2019Neural Network Hyperparameter Optimization for the Assisted Selection of Assembly Equipment
Hagemann, S.; Sünnetcioglu, A.; Fahse, T.; Stark, R.
Conference Paper
2019Niobcarbid statt Wolframcarbid Alternativer Schneidstoff in der Drehbearbeitung
Kropidlowski, K.; Uhlmann, E.; Woydt, M.; Theiler, G.; Gradt, T.
Journal Article
2019Nonparametric Inverse Dynamic Models for Multimodal Interactive Robots
Haninger, Kevin; Tomizuka, Masayoshi
Preprint
2019Numerical and experimental investigation of thermo-fluid flow and element transport in electromagnetic stirring enhanced wire feed laser beam welding
Meng, X.; Artinov, A.; Bachmann, M.; Rethmeier, M.
Journal Article
2019Numerische Simulation einer AM-Prozesskette im DED Auftragschweißen
El-Sari, Bassel; Biegler, Max; Graf, Benjamin; Rethmeier, Michael
Conference Paper
2019On the search for the origin of the bulge effect in high power laser beam welding
Artinov, A.; Bakir, N.; Bachmann, M.; Gumenyuk, A.; Na, S.-J.; Rethmeier, M.
Journal Article
2019Ortsabhängiges Verschleißmodell für das Doppelseitenplanschleifen mit Planetenkinematik
List, Michael
: Rethmeier, M.; Uhlmann, E.; Klocke, F.
Dissertation
2019Pocket milling of composite fibre-reinforced polymer using industrial robot
Melo, E.G. de; Klein, T.B.; Reinkober, S.; Gomes, J.D.O.; Uhlmann, E.
Journal Article
2019Point Pair Feature Matching: Evaluating Methods to Detect Simple Shapes
Ziegler, M.; Rudorfer, M.; Kroischke, X.; Krone, S.; Krüger, J.
Conference Paper
2019A practical approach to reduce energy consumption in a serial production environment by shutting down subsystems of a machine tool
Can, Alperen; Thiele, Gregor; Krüger, Jörg; Fisch, J.; Klemm, C.
Journal Article
2019Practical stability of under-constrained cable-suspended parallel robots
Surdilovic, D.; Radojicic, J.
Conference Paper
2019Prediction of the initial fatigue crack location of automatically welded tubular joints for jacket support structures
Schaumann, P.; Schürmann, K.; Pittner, A.; Rethmeier, M.
Conference Paper
2019A Process Model for Enhancing Digital Assistance in Knowledge-Based Maintenance
Kovacs, Klaudia; Ansari, Fazel; Geisert, Claudio; Uhlmann, E.; Glawar, Robert; Sihn, Wilfried
Conference Paper
2019Profilverschleißreduzierung beim Planschleifen
Lichtschlag, L.; Uhlmann, E.
Journal Article
2019Prototyping von Produkt-Service Systemen und Smart Services in der Konzeptphase des Entwicklungsprozesses
Exner, Konrad
: Jochem, Roland; Stark, Rainer; Meier, Horst
Dissertation
2019Qualitätskriterien für den Datenfluss im Advanced System Engineering
Müller, Helena; Riedelsheimer, Theresa; Lünnemann, Pascal; Blüher, Till; Stark, Rainer
Conference Paper
2019Reale Daten für Simulationen im digitalen Zwilling
Chemnitz, Moritz; Heimann, Oliver; Vick, A.
Journal Article
2019Reale Daten für Simulationen im digitalen Zwilling - Untersuchung zur Aufnahme von Profinet-Daten und deren Wiedergabe in komplexen Simulationsumgebungen
Chemnitz, M.; Heimann, O.; Vick, A.
Journal Article
2019Reconfiguring machine tool behavior via smart building block systems
Uhlmann, E.; Peukert, B.
Journal Article
2019Reifegradmodelle in der Produktentwicklung
Randermann, M.; Blüher, T.; Jochem, R.; Stark, R.
Journal Article
2019Requirements for a methodology for the analysis and assessment of technological capability in research and technology organizations
Hecklau, F.; Kidschun, F.; Kohl, H.; Tominaj, S.
Conference Paper
2019Resistance spot welding under external load for evaluation of LME susceptibility of zinc coated advanced high strength steel sheets
Frei, Julian; Biegler, Max; Rethmeier, Michael
Conference Paper
2019Review of methodologies for the assessment of the technological capability of RTOS
Hecklau, F.; Kidschun, F.; Tominaj, S.; Kohl, H.
Conference Paper
2019Rheological and Mechanical Gradient Properties of Polyurethane Elastomers for 3D-Printing with Reactive Additives
Wang, P.; Auhl, D.; Uhlmann, E.; Gerlitzky, G.; Wagner, M.H.
Journal Article
2019Safe rendering of high impedance on a series-elastic actuator with disturbance observer-based torque control
Haninger, Kevin; Asignacion, Agner; Oh, Sehoon
Preprint
2019Safety of slim tool extensions for milling operations
Uhlmann, E.; Thom, S.; Barth, E.; Pache, T.; Prasol, L.
Conference Paper
2019Semantic Assistance System for Providing Smart Services and Reasoning in Aero-Engine Manufacturing
Gogineni, S.; Exner, K.; Stark, R.; Nickel, J.; Oeler, M.; Witte, H.
Conference Paper
2019Smart Cyber-Physical System applications in production and logistics: Special issue editorial
Ilie-Zudor, E.; Preuveneers, D.; Ekárt, A.; Hohwieler, E.
Editorial
2019Smart Industrial Products - Smarte Produkte und ihr Einfluss auf Geschäftsmodelle, Zusammenarbeit, Portfolios und Infrastrukturen
Lünnemann, Pascal; Wang, Wei Min; Lindow, Kai
: Müller, Patrick (Hrsg.); Lindow, Kai (Hrsg.); Gregorzik, Stefan (Hrsg.); Stark, Rainer (Hrsg.)
Study
2019Study on the feasibility of modelling notations for integrated Product-Service Systems Engineering
Halstenberg, F.A.; Stark, R.
Journal Article
2019Sustainability Reporting in German Manufacturing SMEs
Steinhöfel, Erik; Galeitzke, Mila; Kohl, Holger; Orth, Ronald
Journal Article
2019Symbiotic human-robot collaborative assembly
Wang, L.; Gao, R.; Vancza, J.; Krüger, J.; Wang, X.V.; Makris, S.; Chryssolouris, G.
Journal Article
2019System zur wenigstens bereichsweisen Regelung einer Temperatur eines Industrieroboters und Verfahren zum Erhöhen der Arbeitsgenauigkeit eines Industrieroboters
Uhlmann, Eckart; Reinkober, Sascha; Lenz, Frederik
Patent
2019Systematic product development methodology for customizable IoT devices
Gogineni, Sonika Krishna; Riedelsheimer, Theresa; Stark, Rainer
Journal Article
2019Systematische Methodenanwendung im dynamischen Qualitätsmanagement bei KMU
Schober, Johannes
: Krüger, Jörg; Jochem, Roland
Dissertation
2019Thermal and technological aspects of double face grinding of Al2O3 ceramic materials
Deja, M.; List, M.; Lichtschlag, L.; Uhlmann, E.
Journal Article
2019Tool wear modelling using micro tool diameter reduction for micro-end-milling of tool steel H13
Manso, C.S.; Thom, S.; Uhlmann, E.; Assis, C.L.F de; Conte, E.G del
Journal Article
2019Towards Learning 3d Object Detection and 6d Pose Estimation from Synthetic Data
Rudorfer, M.; Neumann, L.; Krüger, J.
Conference Paper
2019Ultra-precision-milling of silicon by means of single crystal diamond tools
Uhlmann, E.; Polte, M.; Rolon, D.A.; Kühne, S.
Conference Paper
2019Ultrasonic assisted peripheral milling of fiber reinforced plastics in consideration of clamping and cutting edge geometry
Uhlmann, E.; Protz, F.
Journal Article
2019Use of Digital Twins in Additive Manufacturing Development and Production
Bergmann, André; Lindow, Kai
Conference Paper
2019Variable-Latency Networked P-PI and MPC Controller Performance for Industrial Robots
Vick, Axel; Kilinc, Ali; Guhl, Jan
Conference Paper
2019Verbundprojekt SmartStream: Intelligente Bearbeitung durch die Verwendung schaltbarer Fluide
Schmiedel, C.; Bierwisch, C.; Uhlmann, E.; Menzel, P.; Mohseni-Mofidi, S.; Breinlinger, T.; Nutto, C.
Conference Paper
2019Verfahren zur Herstellung einer Werkzeugelektrode und Verfahren zur ihrer Verwendung
Streckenbach, Jan; Wolf, Cora-Sophia; Börnstein, Julian; Uhlmann, Eckart
Patent
2019Verfahren zur kamerabasierten Instrumentennavigation am Beispiel der HNO-Chirurgie
Katanacho, Manuel
: Krüger, Jörg; Uhlmann, Eckart; Wittenberg, Thomas
Dissertation
2019Vermeidung von Schweißimperfektionen im Überlappbereich bei laserstrahlhybrid-geschweißten Rundnähten
Gook, Sergej; Üstündag, Ömer; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2019Vernetzte Transportroboter in der Fabriklogistik
Chemnitz, Moritz; Vick, Axel
Journal Article
2019What dynamics should impedance-controlled robots render?
Haninger, Kevin; Surdilovic, Dragoljub; Bastidas Cruz, Arturo
Presentation
2019Zusammenfassung und Ausblick
Chemnitz, Moritz
Book Article
20183D laser metal deposition: Process steps for additive manufacturing
Graf, Benjamin; Marko, Angelina; Petrat, Torsten; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
20183D-Vorkonturierung mittels Wasserabrasivstrahl
Uhlmann, E.; Männel, C.
Journal Article
2018Additives Fertigungsverfahren zur Herstellung von Bauteilen mit Eigenschaftsgradienten
Uhlmann, E.; Wagner, M.H.; Gerlitzky, G.
Journal Article
2018Affordance Based Approach to Automatic Program Generation for Industrial Robots in Manufacturing
Heimann, Oliver; Krüger, Jörg
Journal Article
2018Anwendungsfälle
Kind, Simon; Rehfeld, Ingolf; Schmidt, Jonas; Geiger, Andreas; Kirsch, Lukas
Book Article
2018Anwendungsszenario und Evaluierung des ViB-SHP-Ansatzes
Blume, Claas; Kind, Simon; Lünnemann, Pascal
Book Article
2018Application of additive manufactured tungsten carbide tool electrodes in EDM
Uhlmann, Eckart; Bergmann, André; Bolz, Robert; Gridin, Witalij
Journal Article
2018Application of Micro Structured, Boron Doped CVD-diamond as μEDM Tool Electrodes
Uhlmann, Eckart; Oberschmidt, Dirk; Bolz, Robert
Journal Article
2018Artefaktkorrektur für die Computertomographie
Uhlmann, Eckart; Polte, Julian; Melnik, Steffen
Journal Article
2018Assessing the predictive capability of numerical additive manufacturing simulations via in-situ distortion measurements on a LMD component during build-up
Biegler, Max; Graf, Benjamin; Rethmeier, Michael
Journal Article
2018Assistenzbasierte virtuelle 2,5-D-Rekonstruktion von Kulturgut
Schneider, Jan; Nickolay, Bertram
Journal Article
2018Aufbau von VR Trainingsumgebungen aus Daten der Virtuellen Produktentstehung
Geiger, Andreas; Stark, Rainer
Journal Article
2018Augmented Reality im Qualitätsmanagement in der Produktentstehung - Chancen und Risiken durch den Wandel der Industrie 4.0
Heinze, Adrian
Master Thesis
2018Automated Body-in-White Production System Design: Data-Based Generation of Production System Configurations
Hagemann, S.; Stark, R.
Conference Paper
2018Automatic design and synthesis of control for a plug and play active vibration control module
Uhlmann, E.; Kushwaha, S.; Mewis, J.; Richarz, S.
Journal Article
2018Automatic detection of field-grown cucumbers for robotic harvesting
Fernández, R.; Montes, H.; Surdilovic, J.; Surdilovic, D.; Gonzalez-De-Santos, P.; Armada, M.
Journal Article
2018Automatisierte Fertigung von Hohlprofilknoten für Jacket-Gründungsstrukturen
Schaumann, P.; Rethmeier, M.; Schürmann, K.; Pittner, A.; Dänekas, C.; Schippereit, C.
Journal Article
2018Beam Hardening Correction Using Cone Beam Consistency Conditions
Abdurahman, S.; Frysch, R.; Bismark, R.; Melnik, S.; Beuing, O.; Rose, G.
Journal Article
2018Benchmarking-unterstützte Standortplanung von industriellen Wertschöpfungsprozessen
Zhou, Xing
: Kohl, Holger
Dissertation
2018Benötigte neue Jobrollen/Engineering Disziplinen
Lünnemann, Pascal
Book Article
2018Boron-doped CVD diamond micro-end mills for machining titanium
Uhlmann, Eckart; Polte, Mitchel; Polte, Julian; Oberschmidt, Dirk
Conference Paper
2018Build-up strategies for additive manufacturing of three dimensional Ti-6Al-4V-parts produced by laser metal deposition
Spranger, Felix; Graf, Benjamin; Schuch, Michael; Hilgenberg, Kai; Rethmeier, Michael
Journal Article
2018Build-up strategies for laser metal deposition in additive manufacturing
Petrat, Torsten; Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2018Build-up strategies for temperature control using laser metal deposition for additive manufacturing
Petrat, Torsten; Winterkorn, René; Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2018Building the ENRICH Community - Common European Network as Advantage for ENRICH in Brazil, China and in the USA
Haunschild, Johanna; Orth, Ronald; Pereira Ferreira, Romulo
Conference Paper
2018Camera-based instrument navigation in ENT-surgery
Katanacho, Manuel; Uhlmann, Eckart
Conference Paper
2018CareJack - die intelligente Softorthese zur Ergonomieunterstützung
Kuschan, Jan; Schmidt, Henning; Krüger, Jörg
Journal Article
2018Cloud-based active disturbance rejection control for industrial robots
Briese, Clemens; Vick, Axel; Krüger, Jörg
Conference Paper
2018Cluster identification of sensor data for predictive maintenance in a Selective Laser Melting machine tool
Uhlmann, E.; Pastl Pontes, R.; Geisert, C.; Hohwieler, E.
Journal Article
2018Comparison between GTA and laser beam welding of 9% Ni steel for critical cryogenic applications
El-Batahgy, A-M.; Gumenyuk, A.; Gook, S.; Rethmeier, M.
Journal Article
2018Concept and architecture for programming industrial robots using augmented reality with mobile devices like microsoft HoloLens
Guhl, J.; Nguyen, S.T.; Kruger, J.
Conference Paper
2018Concept of sustainable data for a selective laser melting machine
Uhlmann, Eckart; Pastl Pontes, Rodrigo; Laghmouchi, Abdelhakim; Bergmann, André
Journal Article
2018Conceptual framework for analysing knowledge dynamics in engineering science
Märten, A.; Jenek, J.F.W.; Wang, W.M.; Fleck, C.; Meyer, H.; Stark, R.; Ammon, S.
Conference Paper
2018Corporate Governance: The Evaluation Based Approach to the Governance and Business Models of the EPIC Centre of Excellence in Production Informatics and Control (EPIC Coe)
Monostori, Laszlo; Kadar, Botond; Nick, Gabor; Pfeiffer, Andras; Vargedo, Tamas; Hecklau, Fabian
Conference Paper
2018Correction to: Execution and evaluation of enterprise models in IEM/MO2GO based on Petri net
Jin, G.; Jäkel, F.-W.
Journal Article
2018Das cyberphysische Produktmodell
Lünnemann, Pascal; Kirsch, Lucas
Book Article
2018Data-driven business model a methodology to develop smart services
Exner, K.; Stark, R.; Kim, J.Y.
Conference Paper
2018Decision support tool to derive sustainable product configurations as a basis for conceptual design
Buchert, T.; Stark, R.
Conference Paper
2018Definition of edges in correlation to abrasive flow machining as a finishing process
Groeger, S.; Segel, F.; Uhlmann, E.; Roßkamp, S.
Journal Article
2018Design of neural network arc sensor for gap width detection in automated narrow gap GMAW
Fabry, C.; Pittner, A.; Rethmeier, M.
Journal Article
2018Design Simulation of Components made from Diamond-Ceramic Composites for Deep-Sea Mining
Uhlmann, Eckart; Uhlemann, Sebastian; Borsoi Klein, Tiago; Schmiedel, Christian
Poster
2018Developing Regional Intellectual Capital through Future Workshops. A Case Study from Germany
Orth, Ronald; Federwisch, Tobias; Jordan, Kristina
Conference Paper
2018Development of a Methodology to Develop Venture Capital Strategies in Applied R&D Networks
Cap, Jan-Patrick
Conference Paper
2018Diamond burnishing for mould and die industry
Uhlmann, Eckart; Oberschmidt, Dirk; Guhde, Sebastian; Polte, Mitchel; Polte, Julian
Conference Paper
2018Dienstebasierte Integration objektspezifischer Lageerkennungsalgorithmen am Beispiel eines roboterbasierten Greifszenarios
Rudorfer, Martin; Chemnitz, Moritz
Book Article
2018Digitale Zwillinge - Entwicklungen im Maschinenbau
Stark, Rainer; Halstenberg, Friedrich A.
Journal Article
2018Distributed Industrial Robot Control using Environment Perception and Parallel Path Planning Cloud Services
Wassermann, Jonas; Vonasek, Vojtech; Vick, Axel
Conference Paper
2018Distributed Motion Planning for Industrial Random Bin Picking
Vonasek, Vojtech; Vick, Axel; Krüger, Jörg
Journal Article
2018Distributed Product Design in Educational Programs
Fresemann, C.; Stark, R.; Damgrave, R.; Bekkering, N.; Lutters, E.
Journal Article
2018Drehen mit Niobcarbid-basierten Werkzeugen - Verschleißuntersuchungen von Niobcarbid verglichen mit Wolframcarbid auf eisenbasierten Werkstoffen
Uhlmann, E.; Kropidlowski, K.; Hinzmann, D.; Meier, P.; Prasol, L.; Woydt, M.
Journal Article
2018Ductile machining of brittle materials for manufacturing micro-optic components
Uhlmann, Eckart; Oberschmidt, Dirk; Rolon, D.A.; Kühne, S.; Jagodzinski, M.; Malcher, M.
Conference Paper
2018Dynamic Analysis of Abrasive Filaments in Contact with Different Workpiece Geometries
Uhlmann, E.; Sommerfeld, C.
Journal Article
2018Effect of laser-beam and hybrid-laser-arc welding parameters and filler metal on microstructure and mechanical properties of thick heat-treated steel X8Ni9+QT640 for cryogenic service
El-Batahgy, A-M.; Gook, S.; Gumenyuk, A.; Rethmeier, M.
Presentation
2018Effects of abrasive waterjet trepanning on the kerf formation
Uhlmann, E.; Männel, C.
Conference Paper
2018The Effects of Laser Microtexturing of Biomedical Grade 5 Ti-6Al-4V Dental Implants (Abutment) on Biofilm Formation
Uhlmann, Eckart; Schweitzer, Luiz; Kieburg, Heinz; Spielvogel, Anja; Huth-Herms, Katrin
Journal Article
2018An Efficiency-Oriented Batch Reduction Procedure for Hazardous Material
Halstenberg, Friedrich A.; Chen, Eleanor Y.; Rumpel, Guido; Schneider, Ralph; Stark, Rainer
Journal Article
2018Einsatzverhalten und Leistungsbedarfe unterschiedlicher Kühlungsmethoden beim Außen-Längs-Runddrehen
Fürstmann, Paul
: Krüger, J.; Uhlmann, Eckart; Klocke, F.
Dissertation
2018Electro-discharge drilling with MP-based carbon fibre electrodes
Uhlmann, Eckart; Perfilov, Ivan; Yabroudi, S.; Schweitzer, Luiz; Polte, Mitchel
Conference Paper
2018Embedding electronics into additive manufactured components using laser metal deposition and selective laser melting
Petrat, Torsten; Kersting, Robert; Graf, Benjamin; Rethmeier, Michael
Journal Article
2018Enabling Human-Robot-Interaction via Virtual and Augmented Reality in Distributed Control Systems
Guhl, Jan; Hügle, Johannes; Krüger, Jörg
Journal Article
2018Endkonturnahe Schruppbearbeitung von Titanaluminid mittels Wasserabrasivstrahlen mit kontrollierter Schnitttiefe
Faltin, Fabian
: Kohl, Holger; Uhlmann, E.; Abele, E.
Dissertation
2018EnerSEC. Reaktive IT-Sicherheitsüberwachung automatisierter technischer Anlagen in sicherheitskritischen Energie-Infrastrukturen
Klein, Max; Thiele, Gregor; Horn, Christian; Krüger, Jörg
Poster
2018Engineering activities: Considering value creation from a holistic perspective
Lünnemann, P.; Stark, R.; Wang, W.M.; Manteca, P.I.
Conference Paper
2018ENRICH - European Network of Research and Innovation Centres and Hubs
Orth, Ronald; Haunschild, Johanna
Poster
2018ENRICH Community Building - Development of a Decision Support Tool for Membership Selection
Haunschild, Johanna; Kreiling, Laura
Conference Paper
2018Enterprise Interoperability
: Zelm, Martin (Editor); Jaekel, Frank-Walter (Editor); Doumeingts, Guy (Editor); Wollschlaeger, Martin (Editor)
Conference Proceedings
2018Enterprise interoperability management and artifacts
Jäkel, Frank-Walter
Conference Paper
2018Entwicklung eines hochauflösenden wellenlängendispersiven Spektrometers für den Spektralbereich harter Röntgenstrahlung
Holfelder, Ina
: Oberschmidt, D.; Uhlmann, Eckart; Beckhoff, B.
Dissertation
2018Entwicklung eines methodenbasierten Modells zur Messung und Bewertung der Produktivität von Dienstleistungsprozessen
Amini, Ahmad Schafiq
: Krüger, J.; Jochem, R.; Woll, R.; Herrmann, J.
Dissertation
2018Entwicklung eines Validierungsframeworks zur erlebbaren Absicherung von Fahrerassistenzsystemen
Auricht, Maik
: Göhlich, D.; Stark, Rainer; Bernasch, J.
Dissertation
2018Entwicklung und Aufbau eines Probenhalters für die Emissionsgradmessung an semitransparenten Materialien
Gieseler, J.; Monte, C.; Adibekyan, A.; Hollandt, J.; Kersting, R.
Journal Article
2018Equivalent heat source approach in a 3D transient heat transfer simulation of full-penetration high power laser beam welding of thick metal plates
Artinov, A.; Bachmann, M.; Rethmeier, M.
Journal Article
2018Erhöhung der Genauigkeit beim Fräsen mit Industrierobotern
Uhlmann, E.; Reinkober, S.; Hollerbach, T.
Journal Article
2018Erhöhung der Genauigkeit beim Fräsen mit Industrierobotern durch abtriebsseitige Winkelmesssysteme
Uhlmann, Eckart; Reinkober, Sascha; Hollerbach, Tobias
Journal Article
2018Evaluation Model for the Derivation of a Sustainable Digitisation Strategy
Knothe, T.; Oertwig, N.; Obenaus, M.; Butschek, P.
Conference Paper
2018Evaluation of Business Models - A Systematic Literature Review
Steinhöfel, Erik; Hussinki, Henri; Bornemann, Manfred
Conference Paper
2018Evaluierung
Blume, Claas; Lünnemann, Pascal
Book Article
2018Execution and evaluation of enterprise models in IEM/MO2GO based on Petri net
Jin, Guangying; Jäkel, Frank-Walter
Journal Article
2018Facts & Figures: Get to know Brazil and its innovative Industries
Haunschild, Johanna; Pereira Ferreira, Romulo; Tsog, Sara
Report
2018Facts & Figures: Get to know the European Union and its Innovative Industries
Haunschild, Johanna; Pereira Ferreira, Romulo
Report
2018Fatos & Figuras: Conheça a União Europeia e suas indústrias inovadoras
Haunschild, Johanna; Pereira Ferreira, Romulo
Report
2018Feedback to Design with Digital Lifecycle-Twins - literature review and concept presentation
Riedelsheimer, Theresa; Lindow, Kai; Stark, Rainer
Conference Paper
2018Feinbohrspindel für die Trockenfunkenerosion
Uhlmann, Eckart; Yabroudi, S.; Polte, Mitchel
Journal Article
2018Finishbearbeitung technischer Oberflächen aus gehärtetem Stahl unter Verwendung von Rundbürsten mit Schleiffilamenten
Hochschild, Leif
: Kraft, Marc; Uhlmann, Eckart; Klocke, Fritz
Dissertation
2018Finite element analysis of in-situ distortion and bulging for an arbitrarily curved additive manufacturing directed energy deposition geometry
Biegler, Max; Marko, Angelina; Graf, Benjamin; Rethmeier, Michael
Journal Article
2018The four-step approach for the creation of the HR Concept for the EPIC Centre of Excellence in Production Informatics and Control (EPIC CoE)
Hecklau, Fabian; Orth, Ronald; Kidschun, Florian; Nick, Gabor
Conference Paper
2018Fräsbearbeitung von Nickelbasislegierungen mit Industrierobotern.
Reinkober, Sascha
: Uhlmann, Eckart
Dissertation
2018Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik. Jahresbericht 2017/2018
 
Annual Report
2018Full penetration hybrid laser arc welding of up to 28 mm thick S355 plates using electromagnetic weld pool support
Üstündag, Ömer; Avilov, Vjaceslav; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2018Futur 3.2018
: Uhlmann, Eckart
Journal Issue
2018Ganzheitliche Planung der Qualitätsorganisation in produzierenden Unternehmen
Behmer, Falk Johannes
: Krüger, J.; Jochem, Roland; Woll, R.
Dissertation
2018Ganzheitliche Produktionssysteme in der Pharmaindustrie
Sieckmann, F.; Helm, R.; Kohl, H.; Wissel, S.
Journal Article
2018Gestaltungsaspekte immersiver Fahrsimulationsumgebungen
Reich, Diana
: Stark, Rainer
Dissertation
2018Gesture based robot programming using process knowledge
Heimann, O.; Hügle, J.; Krüger, J.
Conference Paper
2018Grinding of high performance materials with spherical mounted points
Koprowski, Stefan
: Kohl, H.; Uhlmann, Eckart; Weingaertner, W.L.
Dissertation
2018Hand Shape Recognition Using Very Deep Convolutional Neural Networks
Rakowski, Alexander; Wandzik, Lukasz
Conference Paper
2018Hard material small-batch industrial machining robot
Brunete, A.; Gambao, E.; Koskinen, J.; Heikkilä, T.; Kaldestad, K.B.; Tyapin, I.; Hovland, G.; Surdilovic, D.; Hernando, M.; Bottero, A.; Anton, S.
Journal Article
2018Helical electrodes for improved flushing conditions in drilling EDM of MAR-M247
Uhlmann, Eckart; Perfilov, Ivan; Yabroudi, S.; Schweitzer, Luiz; Polte, Mitchel
Conference Paper
2018Heutige Defizite industrieller Anwendung
Lünnemann, Pascal
Book Article
2018High-pressure jet cutting with liquid CO2 of plastics
Uhlmann, E.; John, P.
Conference Paper
2018Hochleistungskeramik effizienter schleifen
Borsoi Klein, Tiago; Korpowski, Stefan
Journal Article
2018Holo Pick'n'Place
Rudorfer, M.; Guhl, J.; Hoffmann, P.; Krüger, J.
Conference Paper
2018How participative is open source hardware? Insights from online repository mining
Bonvoisin, J.; Buchert, T.; Preidel, M.; Stark, R.G.
Journal Article
2018Human robot collaboration - using kinect v2 for ISO/TS 15066 speed and separation monitoring
Rosenstrauch, Martin J.; Pannen, Tessa J.; Krüger, Jörg
Journal Article
2018Hybrid laser arc welding of 25 mm thick materials using electromagnetic weld pool support
Üstündag, Ömer; Avilov, Vjaceslav; Gumenyuk, Andrey; Rethmeier, Michael
Presentation
2018Hybrid laser-arc welding of thick-walled ferromagnetic steels with electromagnetic weld pool support
Üstündag, Ömer; Fritzsche, André; Avilov, Vjaceslav; Rethmeier, Michael; Gumenyuk, Andrey
Journal Article
2018Hybrid Prototype-in-the-Loop
Buchholz, Christian; Kind, Simon; Blume, Claas; Enin, Alexey; Stark, Rainer
Journal Article
2018Hybrid prototype-in-the-loop
Buchholz, C.; Kind, S.; Blume, C.; Enin, A.; Stark, R.
Journal Article
2018Hybrides Auftragschweißen: Potentiale des laserunterstützten Plasma-Pulver-Auftragschweißens (PTA)
Brunner-Schwer, Christian; Graf, Benjamin; Rethmeier, Michael; Schreiber, Frank
Conference Paper
2018Identification of Human Dynamics in User-Led Physical Human Robot Environment Interaction
Haninger, Kevin; Surdilovic, Dragoljub
Conference Paper
2018Implementation of lean production systems in small and medium-sized pharmaceutical enterprises
Sieckmann, Felix; Ngoc, Hien Nguyen; Helm, René; Kohl, Holger
Journal Article
2018Improved degassing in laser beam welding of aluminum die casting by an electromagnetic field
Fritzsche, A.; Hilgenberg, K.; Teichmann, F.; Pries, H.; Dilger, K.; Rethmeier, M.
Journal Article
2018Improvement of Defect Detectability in Machine Tools Using Sensor-based Condition Monitoring Applications
Demilia, G.; Gaspari, A.; Hohwieler, E.; Laghmouchi, A.; Uhlmann, E.
Journal Article
2018In-process quality assurance for selective laser melting through online generation of key performance indicators in context of industrie 4.0
Pastl Pontes, Rodrigo; Uhlmann, Eckart
Book Article
2018In-situ distortions in LMD additive manufacturing walls can be measured with digital image correlation and predicted using numerical simulations
Biegler, Max; Graf, Benjamin; Rethmeier, Michael
Journal Article
2018Increased tool performance with niobium carbide based cutting materials in dry cylindrical turning
Uhlmann, E.; Hinzmann, D.; Kropidlowksi, K.; Meier, P.; Prasol, L.; Woydt, M.
Journal Article
2018Industrial Image Processing Applications as Orchestration of Web Services
Rudorfer, M.; Krüger, J.
Journal Article
2018Industrielle Netzwerkanwendungen in der Virtuellen Produktentstehung
Stark, Rainer; Riedelsheimer, Theresa
Journal Article
2018Industry 4.0 as enabler for a sustainable development
Stock, Tim; Obenaus, Michael; Kunz, Sascha; Kohl, Holger
Journal Article
2018Influence of ceramic media composition on material removal in vibratory finishing
Uhlmann, E.; Eulitz, A.
Journal Article
2018Influence of cutting edge micro-geometry in micro-milling of copper alloys with reduced lead content
Uhlmann, Eckart; Kuche, Yves; Polte, Julian; Polte, Mitchel
Journal Article
2018Influence of heat input and preheating on the cooling rate, microstructure and mechanical properties at the hybrid laser-arc welding of API 5L X80 steel
Turichin, G.; Kuznetsov, M.; Pozdnyakov, A.; Gook, S.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2018Influence of tilt and lead angles on 5-axis grinding with spherical mounted points
Koprowski, S.; Uhlmann, E.; Weingaertner, W.
Journal Article
2018International Innovation Partnerships by ENRICH in Brazil
Will, Markus; Haunschild, Johanna
Presentation
2018Intuitive robot programming through environment perception, augmented reality simulation and automated program verification
Wassermann, Jonas; Vick, Axel; Krüger, Jörg
Journal Article
2018Intuitive Roboterprogrammierung per Fingerzeig
Heimann, Oliver; Hügle, Johannes
Journal Article
2018Investigating challenges of a sustainable use of marine mineral resources
Kaluza, Andrea; Lindow, Kai; Stark, Rainer
Journal Article
2018Investigation of solidification cracking susceptibility during laser beam welding using an in-situ observation technique
Bakir, N.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2018Investigation of wear resistance of coated PcBN turning tools for hard machining
Uhlmann, E.; Riemer, H.; Schröter, D.; Henze, S.; Sammler, F.; Barthelmä, F.; Frank, H.
Journal Article
2018IT-basiertes Werkzeug zur Datenflussanalyse im Entwicklungsumfeld
Riedelsheimer, Theresa; Lünnemann, Pascal; Wehking, Sebastian; Lindow, Kai
Journal Article
2018IT-Systemarchitektur
Lünnemann, Pascal; Kirsch, Lucas; Kind, Simon; Becker, Waldemar; Könnecke, Konstantin; Zuchold, Jörg-Uwe
Book Article
2018Knowledge in engineering design
Preidel, Maurice; Wang, Wei Min; Exner, Konrad; Stark, Rainer
Conference Paper
2018Konstruktive Maßnahmen zur Reduzierung des thermischen Einflusses auf die Genauigkeit von Industrierobotern
Reinkober, Sascha; Mohnke, Christian
Journal Article
2018Laser beam oscillation welding for automotive applications
Müller, A.; Goecke, S.F.; Rethmeier, M.
Journal Article
2018Laser-plasma-cladding as a hybrid metal deposition-technology applying a SLM-produced copper plasma nozzle
Brunner-Schwer, Christian; Kersting, Robert; Graf, Benjamin; Rethmeier, Michael
Journal Article
2018Laser-Pulver-Auftragschweißen in der additiven Prozesskette für Legierungen aus dem Turbomaschinenbau
Graf, Benjamin
: Uhlmann, E.; Rethmeier, Michael; Schmidt, M.
Dissertation
2018Learning Factory for Industry 4.0 to provide future skills beyond technical training
Schallock, Burkhard; Rybski, Christoffer; Jochem, Roland; Kohl, Holger
Journal Article
2018Learning process planning for special machinery assembly
Menn, Jan-Philipp; Sieckmann, Felix; Kohl, Holger; Seliger, Günther
Journal Article
2018Learnstruments: Learning-conducive artefacts to foster learning productivity in production engineering
Menn, Jan-Philipp; Muschard, Bernd; Schumacher, Bastian; Sieckmann, Felix; Kohl, Holger; Seliger, Günther
Journal Article
2018Leichtbau für Triebwerke - Bearbeitung von Ceramic Matrix Composites
Borsoi Klein, Tiago
Journal Article
2018Low heat input gas metal arc welding for dissimilar metal weld overlays part II: The transition zone
Frei, Julian; Alexandrov, Boian T.; Rethmeier, Michael
Journal Article
2018Machine Tool and Technology for Manufacturing of Micro-structures by Micro Dry Electrical Discharge Milling
Uhlmann, E.; Perfilov, I.
Journal Article
2018Manufacturing and replication of sub-10 μm micro-bowls for biomedical sensor systems
Uhlmann, Eckart; Hein, Christoph; Polte, Mitchel; Polte, Julian; Dähne, L.
Conference Paper
2018Manufacturing of carbide tools by Selective Laser Melting
Uhlmann, Eckart; Bergmann, André; Bolz, Robert
Journal Article
2018Maximization of operational workspace of a mobile manipulator system
Kalidindi, V.V.; Vick, A.; Krüger, J.
Conference Paper
2018Mechanical pretreatment before electroplating of aluminium alloy AlSi12
Uhlmann, E.; Jaczkowski, R.
Journal Article
2018Methode zur Bestimmung spezifischer Kräfte durch Fräsversuche und Anwendung bei der Natursteinbearbeitung
Manthei, Marcel
: Kohl, H.; Uhlmann, Eckart; Denkena, B.
Dissertation
2018Methodik zur integrierten virtuellen Auslegung und Absicherung flexibler Bauteile
Hofheinz, Nicolas
: Rethmeier, Michael; Stark, Rainer; Wartzack, Sandro; Schwenk, C.
Dissertation
2018Methodology for the in-process evaluation of software-based process failures in Selective Laser Melting machine tools
Pastl Pontes, Rodrigo
: Krüger, Jörg; Uhlmann, Eckart; Gomes, Oliveira
Dissertation
2018Micro formed holographic security features in steel
Uhlmann, Eckart; Schulze, Stephanie; Polte, Julian; Hein, Christoph; Matthiesen, Johannes; Böge, Manfred
Conference Paper
2018Mikrobohren ohne flüssige Dielektrika
Uhlmann, Eckart; Yabroudi, S.; Polte, Mitchel
Journal Article
2018Mikrofräswerkzeuge mit Schneiden aus cBN
Uhlmann, E.; Polte, J.; Polte, M.; Kuche, Y.; Wiesner, H.
Journal Article
2018Model based, modular configuration of cyber physical systems for the information management on shop-floor
Jaekel, F.-W.; Torka, J.; Eppelein, M.; Schliephack, W.; Knothe, T.
Conference Paper
2018Modelling of Material Removal in Abrasive Flow Machining
Uhlmann, E.; Roßkamp, S.
Journal Article
2018Möglichkeiten der Bildverarbeitung für Additive Manufacturing Reparaturen
Schlüter, Marian
Presentation
2018Morphing Detection Using a General-Purpose Face Recognition System
Wandzik, Lukasz; Kaeding, Gerald; Vicente-Garcia, Raul
Conference Paper
2018Motion planning with motion primitives for industrial bin picking
Vonasek, V.; Vick, A.; Saska, M.
Conference Paper
2018Multimodal Environment Dynamics for Interactive Robots
Haninger, Kevin; Surdilovic, Dragoljub
Conference Paper
2018Neues Elektrodenkonzept verbessert Senkerodieren
Streckenbach, Jan; Uhlmann, Eckart; Wolf, Cora-Sophia; Börnstein, Julian; Polte, Mitchel
Journal Article
2018A new process design for manufacturing sapphire wafers
Uhlmann, E.; List, M.; Patraschkov, M.; Trachta, G.
Journal Article
2018Novel metrology to determine the critical strain conditions required for solidification cracking during laser welding of thin sheets
Bakir, N.; Pavlov, V.; Zavjalov, S.; Volvenko, S.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2018Numerical simulation of the weld pool dynamics during pulsed laser welding using adapted heat source models
Lange, F.; Artinov, A.; Bachmann, M.; Rethmeier, M.; Hilgenberg, K.
Journal Article
2018Numerical simulation on the origin of solidification cracking in laser welded thick-walled structures
Bakir, N.; Artinov, A.; Gumenyuk, A.; Bachmann, M.; Rethmeier, M.
Journal Article
2018Numerische Prozesssimulation zur Auslegung des Druckfließläppens am Beispiel additiv gefertigter Bauteile
Schmiedel, Christian
: Rethmeier, Michael; Uhlmann, Eckart; Abele, Eberhard
Dissertation
2018Oberflächengüte additiv gefertigter Kupferbauteile: Steigerung der Oberflächenqualität von Deck- und Seitenflächen von SLM-Bauteilen
Uhlmann, E.; Kashevko, V.
Journal Article
2018Oberflächenvorbehandlung von Fassadenglas
Uhlmann, E.; Jaczkowski, R.
Journal Article
2018Online-Messung bei der Drehbearbeitung Bauteildurchmesser und- rauheit während der Zerspanung messen
Uhlmann, E.; Holznagel, T.; Prasol, L.
Journal Article
2018Optimization with the evolution strategy by example of electrical-discharge drilling
Streckenbach, J.; Santibáñez Koref, I.; Rechenberg, I.; Uhlmann, E.
Conference Paper
2018Optimized data integration for tracelinking in product development through the application of semantic web technologies
Woll, Robert
: Stark, Rainer
Dissertation
2018Orbital hybrid laser arc welding using a high power fibre laser for pipeline construction
Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2018Perspectives for International Engineering Education
Stock, Tim; Kohl, Holger
Journal Article
2018PKD-Glattdrückwerkzeuge für den Werkzeug- und Formenbau
Uhlmann, Eckart; Polte, Mitchel; Polte, Julian; Guhde, Sebastian; Kuche, Yves; Kappel, Thomas
Journal Article
2018Porosity of LMD manufactured parts analyzed by Archmimedes method and CT
Marko, Angelina; Raute, Julius; Linaschke, Dorit; Graf, Benjamin; Rethmeier, Michael
Journal Article
2018Potentials and limitations of simulation based artefact correction in computed tomography
Uhlmann, Eckart; Polte, Julian; Melnik, Steffen
Conference Paper
2018PowerGrasp: Concept for a novel Soft-Robotic Arm Support System
Kuschan, Jan; Goppold, Jean-Paul; Schmidt, Henning; Krüger, Jörg
Conference Paper
2018Präzise gestenbasierte Roboterprogrammierung
Heimann, Oliver; Hügle, Johannes; Krüger, Jörg
Book Article
2018Probabilities in safety of machinery - how fixed and movable guards bring about a significant risk reduction
Mödden, H.; Uhlmann, E.; Prasol, L.; Thom, S.; Duchstein, B.
Conference Paper
2018Prognose der Oberflächenbeschaffenheit für die additive Fertigung mittels Laser-Pulver-Auftragschweißen
Marko, Angelina; Petrat, Torsten; Graf, Benjamin; Rethmeier, Michael
Conference Paper
2018Prozessüberwachung beim ultraschallunterstützten Schleifen: Einfluss der Werkzeuggeometrie und der Prozessparameter auf die Ultraschallamplitude beim Schleifen
Uhlmann, E.; Bruckhoff, J.
Journal Article
2018A PSS maturity self-assessment tool
Exner, Konrad; Balder, Juliane; Stark, Rainer
Journal Article
2018Qualitätsmanagement in der Automobilindustrie und dessen Umsetzung an Produktionsstandorten in der Volksrepublik China unter Berücksichtigung kultur- und kooperationsbedingter Einflüsse
Linthe, Oliver
: Krüger, J.; Jochem, R.; Woll, R.
Dissertation
2018Quantification and compensation of systematic errors in pressure measurements applied to oil pipelines
Thiele, Gregor; Liu, Martin; Chemnitz, Moritz; Krüger, Jörg
Conference Paper
2018Registration of pre- and postoperative surface scans for pediatric neurosurgery
Katanacho, Manuel; Lack, John-Certus; Fehlhaber, Felix; Krüger, Jörg
Journal Article
2018Robust Passivity and Passivity Relaxation for Impedance Control of Flexible-Joint Robots with Inner-Loop Torque Control
Haninger, Kevin; Tomizuka, Masayoshi
Journal Article
2018Safe human robot collaboration - Operation area segmentation for dynamic adjustable distance monitoring
Rosenstrauch, Martin J.; Krüger, Jörg
Conference Paper
2018Shop floor management systems in case of increasing process variation
Schliephack, Wolf
Conference Paper
2018Smart Service Lebenszyklus
Exner, Konrad; Blüher, Till; Stark, Rainer
Journal Article
2018SmartSensX. Ein Konzept für vernetzte tragbare Sensoren zur Anwendung in der Softrobotik und Mensch Maschine Interaktion
Hackbart, R.; Kostelnik, J.; Kuschan, Jan; Schmidt, Henning; Krüger, Jörg; Vieroth, R.; Lang, K.-D.
Conference Paper
2018Smoothed Particle Hydrodynamics simulation of the machining process of Inconel 718
Uhlmann, E.; Barth, E.
Journal Article
2018Spannutschleifen von Hartmetall-Schaftwerkzeugen mit gradierten Schleifscheiben
Schröer, Nikolas
: Meyer, H.J.; Uhlmann, Eckart; Biermann, Dirk
Dissertation
2018State of the Art Literature Analysis of Innovation Network Management Frameworks
Cap, Jan-Patrick
Conference Paper
2018Strain-rate controlled Gleeble experiments to determine the stress-strain behavior of HSLA steel S960QL
Neubert, S.; Pittner, A.; Rethmeier, M.
Journal Article
2018Strömungsschleifen von Turbinenschaufeln
Schmiedel, Christian
Journal Article
2018Study of gap and misalignment tolerances at hybrid laser arc welding of thick-walled steel with electromagnetic weld pool support system
Üstündag, Ömer; Fritzsche, André; Avilov, Vjaceslav; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2018A study on shielded metal arc welding of 9%Ni steel using non-conventional ferritic welding electrode for LNG facilities
Siayah, A.; El-Batahgy, A-M.; Khafagi, S.; Gumenyuk, A.; Gook, S.; Rethmeier, M.
Presentation
2018Study on sustainability developments in industrial practice
Lindow, Kai; Kaluza, Andrea; Stark, Rainer
Journal Article
2018Study on the role of recondensation flux in high power laser welding by computational fluid dynamics simulations
Muhammad, S.; Han, S.-W.; Na, S.-J.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2018Substitution of commercially coated tungsten carbide tools in dry cylindrical turning process by HiPIMS coated niobium carbide cutting inserts
Uhlmann, E.; Hinzmann, D.; Kropidlowksi, K.; Meier, P.; Prasol, L.; Woydt, M.
Journal Article
2018Surface finishing of hardened steel with abrasive brushes
Uhlmann, E.; Sommerfeld, C.
Conference Paper
2018Surface integrity and chip formation in abrasive flow machining
Uhlmann, E.; Roßkamp, S.
Journal Article
2018Susceptibility of electrolytically galvanized dual-phase steel sheets to liquid metal embrittlement during resistance spot welding
Frei, Julian; Rethmeier, Michael
Journal Article
2018Sustainable Innovation in a Multi-University Master Course
Gladysz, Bartlomiej; Urgo, Marcello; Gaspari, Lorenzo; Pozzan, Giovanna; Stock, Tim; Haskins, Cecilia; Jarzebowska, Elzbieta; Kohl, Holger
Journal Article
2018Temperaturvariable Computertomographie: Einsatz für die Qualitätssicherung komplexer Baugruppen
Sawczyn, N.; Polte, M.; Uhlmann, E.
Journal Article
2018Test of industrial Internet of Things. Opening the black box
Jaekel, Frank-Walter; Torka, Jan
Conference Paper
2018Test services for interoperable and secure shop-floor IT application interfaces in OPC-UA
Jäkel, Frank-Walter; Wolff, Tobias; Hackel, Leonard
Conference Paper
2018Three-dimensional dynamic contact analysis of abrasive filaments with a multi-body system
Uhlmann, E.; Sommerfeld, C.
Journal Article
2018Trochoide Fräsbearbeitung mit Industrierobotern
Uhlmann, Eckart; Reinkober, Sascha; Hoffmann, Martin; Käpernick, Peer
Journal Article
2018Trochoide Fräsbearbeitung mit Industrierobotern
Uhlmann, E.; Reinkober, S.; Hoffmann, M.; Käpernick, P.
Journal Article
2018Trocken und rückstandsfrei CFK bearbeiten - Hochdruckstrahlschneiden mit flüssigem CO2
Uhlmann, Eckart; John, Patrick; Reinkober, Sascha
Journal Article
2018Ultrapräzisionsverfahren zur Erhöhung der Güte abbildender Beugungsgitter
Kühne, Stefan
: Stark, Rainer; Uhlmann, Eckart; Brinksmeier, E.
Dissertation
2018Understanding PLM and PLM customizing: A theoretical fundament for a conceptual approach
Venghaus, E.; Stark, R.
Conference Paper
2018Uniformed approach for exchange of functional and behavior models for simulation using Functional Modelling Interface (FMI)
Wekerle, Timo; Stjepandic, Josip; Pfouga, Alain; Blume, Claas
Conference Paper
2018Using OPC UA for Distributed Industrial Robot Control
Vick, Axel; Krüger, Jörg
Conference Paper
2018Using Transitive Relations for Automatic Creation of Consistent Traceability in Model-based Systems Engineering
Sünnetcioglu, Atakan; Stark, Rainer
Journal Article
2018Validierung von AM-Laser-Metal-Deposition Simulationen mittels in-situ Verzugsmessungen an der aufgebauten Geometrie
Biegler, Max
Conference Paper
2018Verschleißverhalten neuartiger Mikrofräswerkzeuge mit Schneiden aus CBN bei der Hartzerspanung
Uhlmann, Eckart; Polte, Julian; Polte, Mitchel; Kuche, Yves; Wiesner, Hagen Maximilian
Journal Article
2018VIB-SHP - Virtuelle Inbetriebnahme für Industrie 4.0 zukunftssicher beherrschen
: Stark, Rainer (Hrsg.); Müller, Patrick (Hrsg.); Grosser, Hendrik (Hrsg.)
Report
2018ViB-SHP-Entwicklungsprozess mit Baukästen
Lünnemann, Pascal; Mathes, Bernhard
Book Article
2018ViB-SHP-Konzept in den Dimensionen des Engineering Operating System
Lünnemann, Pascal
Book Article
2018Virtualization technologies in product development
Krems, S.; Reich, D.; Stark, R.
Conference Paper
2018Vision-based Identification Service for Remanufacturing Sorting
Schlüter, Marian; Niebuhr, Carsten; Lehr, Jan; Krüger, Jörg
Journal Article
2018Visual feedback for grasping in virtual reality environments for an interface to instruct digital human models
Geiger, Andreas; Bewersdorf, Imke; Brandenburg, Elisabeth; Stark, Rainer
Conference Paper
2018Visualizing trajectories for industrial robots from sampling-based path planning on mobile devices
Guhl, Jan; Vick, Axel; Vonasek, Vojtech; Krüger, Jörg
Conference Paper
2018Vorgehensmodell zur Methodenauswahl in Six-Sigma-Projekten
Ariza Alvarez, Julian Enrique
: Krüger, J.; Jochem, Roland; Woll, R.
Dissertation
2018Vorgehensweise zur Auslegung des Laserstrahlschmelzens am Beispiel von Wolframkarbid-Kobalt
Bergmann, André
: Rethmeier, Michael; Uhlmann, Eckart; Schmidt, Michael
Dissertation
2018Wear behaviour of HIPIMS coated micro-milling tools with cutting edge preparation for machining steel moulds
Uhlmann, Eckart; Kuche, Yves; Polte, Julian; Polte, Mitchel
Conference Paper
2018Wear Mechanisms of Ceramic Vibratory Finishing Media
Uhlmann, E.; Eulitz, A.
Journal Article
2018Weld pool shape observation in high power laser beam welding
Artinov, A.; Bakir, N.; Bachmann, M.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2018Werkzeug- und prozessseitige Grundlagen des Schienenschleifens unter Berücksichtigung der Schienentemperatur und der Wechselwirkung mit dem Einsatzverhalten der Schiene
Lypovka, Pavlo
: Uhlmann, Eckart
Dissertation
2018Wissensmanagement im Kontext von Industrie 4.0
Orth, Ronald; Steinhöfel, Erik; Galeitzke, Mila; Hecklau, Fabian
Journal Article
2018Wissensmanagement in Freien Berufen
Steinhöfel, Erik
Journal Article
2018The Working Posture Controller: Automated adaptation of the workpiece pose to enable a neutral working posture
Nguyen, The Duy
: Stark, Rainer; Krüger, Jörg; Deuse, Jochen
Dissertation
20173D laser metal deposition in an additive manufacturing process chain
Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2017Accuracy of a single camera, marker based surgical navigation system - simulation and implementation
Katanacho, Manuel; Krumpek, Oliver; Uhlmann, Eckart
Journal Article
2017Adaptives Entwicklungstool zur intelligenten Konfigurierung von Condition-Monitoring-Algorithmen
Laghmouchi, Abdelhakim
Dissertation
2017Additiv gefertigte Kupferlegierungen
Uhlmann, E.; Kashevko, V.
Journal Article
2017Application of D-optimum experimental designs in consideration of restrictions for laser metal deposition
Marko, Angelina; Graf, Benjamin; Gook, Sergej; Rethmeier, Michael
Journal Article
2017Application of head-mounted devices with eye-tracking in virtual reality therapy
Lutz, O.H.-M.; Burmeister, C.; Dos Santos, L.F.; Morkisch, N.; Dohle, C.; Krüger, J.
Journal Article
2017Application of Spindle Speed Increaser as Sustainable Solution to Upgrade Machine Tools
Uhlmann, E.; Thom, S.; Ehricke, M.
Journal Article
2017Assessing carbon dioxide emission reduction potentials of improved manufacturing processes using multiregional input output frameworks
Ward, H.; Burger, M.; Chang, Y.-J.; Fürstmann, P.; Neugebauer, S.; Radebach, A.; Sproesser, G.; Pittner, A.; Rethmeier, M.; Uhlmann, E.; Steckel, J.C.
Journal Article
2017Assessing visual attention in virtual reality: Automatic one-point calibration for eye-tracking
Lutz, O.H.-M.; Kruger, J.
Conference Paper
2017Assistenzsysteme für die Produktion
Kraus, Werner; Stelzer, Patrick; Trostmann, Erik; Surdilovic, Dragoljub
Book Article
2017Assistenzsysteme. Personalisierbare Assistenzkinematiken und am Körper getragene Hebehilfen
Kraus, Werner; Lefint, Jérémy; Müller, Veit; Schwarz, Oliver; Stelzer, Patrick; Surdilovic, Dragoljub; Trostmann, Erik
Book Article
2017Auslegung der additiven Prozesskette
Petrat, Torsten; Kersting, Robert
Journal Article
2017Baustrategien zur Beeinflussung von Materialauftrag und Temperaturentwicklung bei der additiven Fertigung mittels Laser-Pulver-Auftragschweißen
Petrat, Torsten
Conference Paper
2017Beitrag immaterieller Faktoren zur Bewältigung von Risiken in Industriellen Produkt-Service Systemen
Wewiór, Jakub Wojciech
: Seliger, Günther
Dissertation
2017BeMobil: Developing a user-friendly and motivating telerehabilitation system for motor relearning after stroke
Minge, M.; Ivanova, E.; Lorenz, K.; Joost, G.; Thüring, M.; Krüger, J.
Conference Paper
2017Benefits and obstacles of sustainable product development methods
Stark, R.; Buchert, T.; Neugebauer, S.; Bonvoisin, J.; Finkbeiner, M.
Journal Article
2017Bürstspanen von Profilen
Uhlmann, E.; Sommerfeld, C.; Renner, M.; Baumann, M.
Journal Article
2017Calibration of thermographic spot weld testing with X-ray computed tomography
Myrach, Philipp; Jonietz, Florian; Meinel, Dietmar; Suwala, Hubert; Ziegler, Mathias
Journal Article
2017Carbon Fibre Recycling from Milling Dust for the Application in Short Fibre Reinforced Thermoplastics
Uhlmann, E.; Meier, P.
Journal Article
2017Characterization and optimization of ultra-precision machine tools and processes by time resolved PSD signature of micro/nano structured optical surfaces
Uhlmann, E.; Kühne, S.; Jagodzinski, M.; Malcher, M.
Conference Paper
2017Charakterisierung des Bruch- und Festigkeitsverhaltens von widerstandspunktgeschweißten Aluminiumverbindungen
Meschut, Gerson; Janzen, Vitalij; Rethmeier, Michael; Gumenyuk, Andrey; Frei, Julian
Journal Article
2017The chicken or the egg: The relationship between knowledge and business model innovation
Inkinen, H.; Steinhöfel, E.
Conference Paper
2017CNNs under attack. On the vulnerability of deep neural networks based face recognition to image morphing
Wandzik, Lukasz; Vicente-Garcia, Raul; Kaeding, Gerald; Chen, Xi
Conference Paper
2017CO2-Reinigung vor dem Impulsmagnetischen Schweißen
Uhlmann, E.; Drieux, S.; Jaczkowski, R.
Journal Article
2017Comparative analysis of German and Brazilian innovation systems to improve binational cooperation
Melo, G.; Haunschild, J.; Orth, R.; Will, M.; Kohl, H.
Conference Paper
2017A Comparison of Best Practices of Public and Private Support Incentives for the Remanufacturing Industry
Guidat, T.; Seidel, J.; Kohl, H.; Seliger, G.
Journal Article
2017Compensating human feedback oscillation in compliance control for industrial robots
Nikoleizig, S.; Vick, A.; Krüger, J.
Conference Paper
2017Computerised mirror therapy with Augmented Reflection Technology for early stroke rehabilitation
Hoermann, S.; Santos, L.F. dos; Morkisch, N.; Jettkowski, K.; Sillis, M.; Devan, H.; Kanagasabai, P.S.; Schmidt, H.; Krüger, J.; Dohle, C.; Regenbrecht, H.; Hale, L.; Cutfield, N.J.
Journal Article
2017Contribution to a database of Ti-6Al-4V components manufactured with selective laser melting process
Uhlmann, Eckart; Bergmann, André; Gridin, Witalij; Rolon, Daniel Alexandre
Conference Paper
2017Current state of practices in open source product development
Bonvoisin, J.; Thomas, L.; Mies, R.; Gros, C.; Stark, R.; Samuel, K.; Jochem, R.; Boujut, J.-F.
Conference Paper
2017Cutting forces while machining STAVAX ESU with binderless-cBN
Uhlmann, E.; Oberschmidt, D.; Polte, J.; Polte, M.
Conference Paper
2017Cutting Simulation with Consideration of the Material Hardening in the Shear Zone of AISI1045
Uhlmann, E.; Henze, S.; Brömmelhoff, K.; Reimers, W.
Journal Article
2017Decentralized data analytics for maintenance in industrie 4.0
Uhlmann, Eckart; Laghmouchi, Abdelhakim; Geisert, Claudio; Hohwieler, Eckhard
Journal Article
2017Deployment of a business and innovation centre to foster cooperation between Europe and Brazil
Haunschild, Johanna; Melo, Gustavo; Orth, Ronald; Will, Markus; Kohl, Holger
Conference Paper
2017Depth map based point cloud registration to CT patient data for surgical navigation
Katanacho, Manuel; Lack, John-Certus; Hoffmann, Jonas; Uhlmann, Eckart
Conference Paper
2017Design of a pressure sensitive matrix for analyzing direct haptic patient-therapist interaction in motor rehabilitation after stroke
Pust, M.; Ivanova, E.; Schmidt, H.; Krüger, J.
Journal Article
2017Design of a test environment for planning and interaction with virtual production processes
Buchholz, C.; Kind, S.; Stark, R.
Journal Article
2017Development of an experimental test setup for in situ strain evaluation during selective laser melting
Uhlmann, E.; Krohmer, E.; Hohlstein, F.; Reimers, W.
Conference Paper
2017Die-Sinking EDM of high aspect ratio cavities in nickel-base alloy
Domingos, David Carlos
: Uhlmann, Eckart
Dissertation
2017Droplet removal from PVD-coated micro-milling tools with the immersed tumbling process
Uhlmann, E.; Kuche, Y.; Oberschmidt, D.; Polte, J.
Conference Paper
2017Dry-EDM milling of micro-scale features with high speed rotating tungsten tube electrodes
Uhlmann, E.; Perfilov, I.; Schimmelpfennig, T.-M.; Schweitzer, L.; Yabroudi, S.
Conference Paper
2017Dynamic contact analysis of abrasive filaments with a discrete system
Uhlmann, E.; Sommerfeld, C.
Conference Paper
2017Dynamical Fatigue Behavior of Additive Manufactured Products For a Fundamental Life cycle Approach
Uhlmann, E.; Fleck, C.; Gerlitzky, G.; Faltin, F.
Journal Article
2017Einflussfaktoren der Reinigung mit flüssigem Kohlendioxid auf fertigungsrelevante Materialeigenschaften medizintechnischer Kunststoffe
Mankiewicz, Johannes
: Uhlmann, Eckart
Dissertation
2017Einsatz von CFK-Fräspartikeln als Füllstoff
Uhlmann, E.; Meier, P.
Journal Article
2017Einsatzverhalten nanocomposite-beschichteter PcBN-Werkzeuge für die Hartdrehbearbeitung.
Oyanedel Fuentes, Javier Alejandro
: Uhlmann, Eckart (Hrsg.)
Dissertation
2017Empirical study on aesthetics as an influencing factor on sustainability
Hagedorn, L.; Buchert, T.; Stark, R.
Conference Paper
2017Empirical study on status of preparation for ISO 9001:2015
Rybski, C.; Jochem, R.; Homma, L.
Journal Article
2017Energieautarke Kühlung von Lineardirektantrieben
Uhlmann, E.; Salein, S.
Journal Article
2017Energy efficiency and environmental impacts of high power gas metal arc welding
Sproesser, G.; Chang, Y.-J.; Pittner, A.; Finkbeiner, M.; Rethmeier, M.
Journal Article
2017Enhancing international collaboration through regional innovation hubs
Cap, Jan-Patrick; Haunschild, Johanna; Melo, Gustavo; Battistella Luna, Marina
Conference Paper
2017Entwicklung eines Verfahrens zur Bestimmung der Rissanfälligkeit von hochfesten Stählen beim Widerstandspunktschweißen
Rethmeier, Michael; Suwala, Hubert; Frei, Julian
: Salomon, Rainer (Hrsg.)
Report
2017Environmental energy efficiency of single wire and tandem gas metal arc welding
Sproesser, G.; Chang, Y.-J.; Pittner, A.; Finkbeiner, M.; Rethmeier, M.
Journal Article
2017EWM and DVS presented EWM Award for augmented reality assistance system for welding
Rethmeier, M.; Stöckl, R.; Atzberger, A.
Journal Article
2017Fatigue behavior of additive manufactured parts in different process chains - An experimental study
Uhlmann, E.; Gerlitzky, G.; Fleck, C.
Conference Paper
2017Fräsen partikelverstärkter Titanmatrix-Verbundwerkstoffe
Uhlmann, E.; Kaulfersch, F.
Journal Article
2017Fräsen von Titanmatrix-Verbundwerkstoffen
Uhlmann, E.; Kaulfersch, F.F.
Journal Article
2017Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik. Jahresbericht 2016/2017
 
Annual Report
2017Future of Business Models in Manufacturing
Seidel, Johannes; Barquet, Ana Paula; Seliger, Günther; Kohl, Holger
Book Article
2017A guideline for planning and implementing an action-based and transnational course in higher engineering education
Stock, T.; Haskins, C.; Gladysz, B.; Urgo, M.; Kohl, H.
Conference Paper
2017Herstellung und Einsatz von PKD-Mikrofräswerkzeugen
Polte, Mitchel
: Uhlmann, Eckart
Dissertation
2017High-performance benchmarking of manufacturing processes with object-based modeling
Zhou, X.; Kohl, H.
Journal Article
2017Hybrid laser arc welding of X80 and X120 steel grade
Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2017Hypothetical sustainability axioms for axiomatic design with an application in grinding machine design
Garretson, I.C.; Linke, B.S.; Peukert, B.; Uhlmann, E.
Conference Paper
2017Impact of a Sustainable Manufacturing-Related Learning Game on Basic Knowledge and Network Thinking
Roeder, I.; Severengiz, M.; Stark, R.; Seliger, G.
Conference Paper
2017Industrie 4.0 - Digital Redesign of Product Creation and Production in Berlin as an Industrial Location
Stark, R.; Damerau, T.; Lindow, K.
Book Article
2017Industrie 4.0 im Produktionsumfeld
Knothe, Thomas; Reiff-Stephan, Jörg; Vladova, Gergana; Ullrich, André; Lipinski, René von; Buße, Dirk; Kern, Manuel
Book Article
2017Influence of non-uniform martensitic transformation on residual stresses and distortion of GMA-welding
Neubert, S.; Pittner, A.; Rethmeier, M.
Journal Article
2017Influence of Procedure-Related Cutting Edge Micro Geometry Modification on the Production Quality When Milling Fibre Reinforced Plastics
Uhlmann, E.; Stawiszynski, B.; Protz, F.; Prasol, L.
Journal Article
2017Innovations in digital modelling for next generation manufacturing system design
Stark, R.; Kind, S.; Neumeyer, S.
Journal Article
2017Innovative control of assembly systems and lines
Krüger, Jörg; Wang, Lihui; Verl, Alexander; Bauernhansl, Thomas; Carpanzano, Emanuele; Makris, Sotiris; Fleischer, Jürgen; Reinhart, Gunther; Franke, Jörg; Pellegrinelli, Stefania
Journal Article
2017Innovative Roboteranwendung: das Experiment Catch
Surdilovic, D.; Surdilovic, J.; Fernandez, R.
Journal Article
2017Instrument calibration for a camera based surgical navigation system
Katanacho, Manuel; Krumpek, Oliver; Uhlmann, Eckart; Melnik, Steffen
Journal Article
2017An integrated approach for industrial robot control and programming combining haptic and non-haptic gestures
Hügle, J.; Lambrecht, J.; Krüger, J.
Conference Paper
2017Intellectual Capital-Driven Technology and Innovation Management
Galeitzke, M.; Steinhöfel, E.; Orth, R.; Kohl, H.
Journal Article
2017Intelligent pattern recognition of a SLM machine process and sensor data
Uhlmann, E.; Pontes, R.P.; Laghmouchi, A.; Bergmann, A.
Journal Article
2017Intelligent pattern recognition of SLM machine energy data
Uhlmann, E.; Pastl Pontes, R.; Laghmouchi, A.; Hohwieler, E.; Feitscher, R.
Journal Article
2017Intelligent production systems in the era of industrie 4.0 - changing mindsets and business models
Uhlmann, E.; Hohwieler, E.; Geisert, C.
Journal Article
2017Intelligente Reinigungs- und Analyseprozesse
Mankiewicz, Johannes; Rochowicz, Markus; Ihde, Jörg
Journal Article
2017Kantenpräparation durch Formschleifprozesse
Uhlmann, E.; Bruckhoff, J.
Journal Article
2017Kinematisch modulierte Schleifprozesse zur Strukturierung von tribologisch beanspruchten Funktionsoberflächen
Bäcker, Clemens
: Göhlich, D.; Uhlmann, E.; Karpuschewski, B.
Dissertation
2017Kognitive Modelle zur virtuellen Absicherung der mentalen Belastung bei Montagetätigkeiten
Brandenburg, Elisabeth; Döllinger, Nina; Geiger, Andreas; Stark, Rainer
Conference Paper
2017Kubisch-kristallines Bornitrid ohne Bindephase als Schneidstoff in der Ultrapräzisions-Zerspanung
Polte, Julian
: Uhlmann, Eckart
Book
2017Let's do this together: Bi-Manu-Interact, a novel device for studying human haptic interactive behavior
Ivanova, E.; Krause, A.; Schälicke, M.; Schellhardt, F.; Jankowski, N.; Achner, J.; Schmidt, H.; Joebges, M.; Krüger, J.
Conference Paper
2017Liquid covered micro-milling
Uhlmann, E.; Oberschmidt, D.; Polte, M.; Polte, J.
Conference Paper
2017Low-dimensional time-discrete models for high dynamic machine tools
Uhlmann, E.; Reis, T.; Oberschmidt, D.; Rendel, O.; Guhde, S.
Conference Paper
2017Manufacturing of CVD diamond micro-end mills with electrical discharge machining
Uhlmann, E.; Oberschmidt, D.; Polte, M.; Polte, J.; Schimmelpfennig, T.-M.; Börnstein, J.
Conference Paper
2017Maturity model and action recommendation: A PSS capability self-assessment tool for companies
Exner, K.; Zimpfer, R.; Stark, R.
Journal Article
2017Measurement of in-mould shear rates by x-ray particle image velocimetry
Uhlmann, E.; Hein, C.; Oberschmidt, D.
Conference Paper
2017Metamorphose zur intelligenten und vernetzten Fabrik
Gelec, Erdem; Kern, Manuel; Schneider, Benjamin; Ullrich, André; Vladova, Gergana; Gronau, Norbert; Lipinski, René von; Buße, Dirk; Oertwig, Nicole
Book Article
2017A model for the development of sustainable innovations for the early phase of the innovation process
Stock, T.; Obenaus, M.; Slaymaker, A.; Seliger, G.
Journal Article
2017Modeling and Analysis of Contact Conditions during NC-Form Grinding of Cutting Edges
Uhlmann, E.; Bruckhoff, J.
Journal Article
2017Modeling approach regarding surface functionalization by force-controlled micro and nano forming
Uhlmann, E.; Kühne, S.; Jagodzinski, M.; Malcher, M.; Trevino, R.
Conference Paper
2017Numerical simulation of thermally induced residual stresses in friction stir welding of aluminum alloy 2024-T3 at different welding speeds
Bachmann, M.; Carstensen, J.; Bergmann, L.; dos Santos, J.F.; Wu, C.S.; Rethmeier, M.
Journal Article
2017Open Educational Resources as a Driver for Manufacturing-related Education for Learning of Sustainable Development
Roeder, I.; Severengiz, M.; Stark, R.; Seliger, G.
Journal Article
2017Overview and new developments in research on resistance spot welding of advanced high strength steels
Frei, Julian; Rethmeier, Michael
Conference Paper
2017PLM Customizing
Sucuoglu, E.; Exner, K.; Stark, R.
Conference Paper
2017Die Potentiale einer lernfähigen Produktion nutzen
Krüger, J.; Sauer, A.; Zäh, M.F.
Journal Article
2017Precision enhancement technologies for multi-axis ultra precision machining of freeform optical elements with variable micro/nano structures
Uhlmann, E.; Kühne, S.; Jagodzinski, M.; Widemann, R.; Haskic, K.
Conference Paper
2017Proactive maintenance as success factor for use-oriented Product-Service Systems
Exner, K.; Schnürmacher, C.; Adolphy, S.; Stark, R.
Journal Article
2017Probabilities in safety of machinery - risk reduction through fixed and moveable guards by standardized impact tests, part 1: Applications and consideration of random effects
Landi, L.; Mödden, H.; Pera, F.; Uhlmann, E.; Meister, F.
Conference Paper
2017Probabilities in safety of machinery - risk reduction through fixed and moveable guards by standardized impact tests, part 2: Possible improvements with FE impact simulations
Landi, L.; Uhlmann, E.; Meister, F.; Pera, F.; Mödden, H.
Conference Paper
2017Region of interest detection with iterative colour clustering and a global weighting scheme
Katanacho, Manuel; Hoffmann, Jonas; Uhlmann, Eckart
Journal Article
2017Resource-optimized verification planning for mechatronic systems in the virtual stage of product creation
Gerhorst, Frank
: Stark, R.
Dissertation
2017Ressourcenadaptive Produktionssysteme
Cherkaskyy, Michael; Feitscher, Roberto; Hohwieler, Eckhard; Oertwig, Nicole; Stoldt, Johannes; Wenzel, Ken
Book Article
2017Ressourcenoptimiertes Produktdesign
Graf, Roberta; Ko, Nathanael; Buchert, Tom; Rothenburg, Uwe
Book Article
2017Safe human-robot-collaboration-introduction and experiment using ISO/TS 15066
Rosenstrauch, M.J.; Kruger, J.
Conference Paper
2017Schritte zur Qualifizierung der Schweißstruktursimulation für die additive Fertigung am Beispiel Laser-Pulver-Auftragsschweißen
Biegler, Max
Conference Paper
2017Shortened manufacturing of individualized carbide tools by selective laser melting and hot isostatic pressing
Uhlmann, Eckart; Bergmann, André; Gridin, Witalij
Conference Paper
2017SHPbench - a smart hybrid prototyping based environment for early testing, verification and (user based) validation of advanced driver assistant systems of cars
Buchholz, C.; Vorsatz, T.; Kind, S.; Stark, R.
Journal Article
2017Simulation erlaubt den Einblick beim Auftragsschweißen
Biegler, Max
Journal Article
2017Simulationsgestütztes Performance Measurement zur Wirtschaftlichkeitsbewertung von Managementsystemen
Raßfeld, Colin
: Krüger, J.; Jochem, R.; Woll, R.
Dissertation
2017Simulationsmodell als Basis zur Ableitung von Zerspanstrategien zur Reduzierung von thermischen Bearbeitungseinflüssen beim Hartdrehen
Ivanov, Ivan Mitkov
: Uhlmann, Eckardt
Dissertation
2017Smart life cycle monitoring for sustainable maintenance and production
Uhlmann, Eckart; Pastl Pontes, Rodrigo; Laghmouchi, Abdelhakim; Geisert, Claudio; Hohwieler, Eckhard
Journal Article
2017Smart wireless sensor network and configuration of algorithms for condition monitoring applications
Uhlmann, E.; Laghmouchi, A.; Geisert, C.; Hohwieler, E.
Journal Article
2017Spanende Bearbeitung von Faserverbundkunststoffen
Uhlmann, E.; Christiansen, G.
Journal Article
2017Statistische Analyse der Schweißraupengeometrie von Ti6Al4V beim Laserbeschichten
Marko, Angelina; Graf, Benjamin; Rethmeier, Michael
Journal Article
2017Steigerung des Formänderungsvermögens der Magnesiumlegierung AZ31 bei Raumtemperatur unter Nutzung der elektro-magnetischen Umformung
Prasol, Lukas
: Uhlmann, Eckart
Dissertation
2017Substitution of Coolant by Using a Closed Internally Cooled Milling Tool
Uhlmann, E.; Riemer, H.; Schröter, D.; Sammler, F.; Richarz, S.
Journal Article
2017Surface integrity and process simulation in abrasive flow machining
Uhlmann, E.; Roßkamp, S.
Conference Paper
2017Surface structuring by pulsed laser implantation
Hilgenberg, K.; Rethmeier, M.; Steinhoff, K.
Journal Article
2017Sustainability in model-based planning and control of global value creation networks
Oertwig, N.; Jochem, R.; Knothe, T.
Journal Article
2017SysML-Modelle maschinell verstehen und verknüpfen
Mochine, Philipp; Sünnetcioglu, Atakan; Dungern, Oskar von; Stark, Rainer
Conference Paper
2017Target-driven selection and scheduling of methods for sustainable product development
Buchert, Tom; Halstenberg, Friedrich A.; Bonvoisin, Jeremy; Lindow, Kai; Stark, Rainer
Journal Article
2017Teilprojekt TP 1 - Information im PLM-Prozess
Rothenburg, Uwe
Book Article
2017Temperature generation of different travel path strategies to build layers using Laser Metal Deposition
Petrat, Torsten; Graf, Benjamin; Winterkorn, René; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2017Trockeneisstrahlen als Vorbehandlungsverfahren vor dem Galvanisieren
Baira, El Mustapha
: Uhlmann, E.; Jochem, R.; Kohl, H.; Krüger, J.; Rethmeier, M.; Seliger, G.; Stark, R.
Dissertation
2017Ultrasonic Assisted Milling of Reinforced Plastics
Uhlmann, E.; Protz, F.; Stawiszynski, B.; Heidler, S.
Journal Article
2017Umweltbewertung und Ökoeffizienz beim Metall-Schutzgasschweißen von Dickblechverbindungen
Sproesser, Gunther
: Rethmeier, Michael
Dissertation
2017Unified information access in product creation with an integrated control desk
Wrasse, Kevin; Diener, Holger; Hayka, Haygazun; Stark, Rainer
Conference Paper
2017User-centered design of a patient's work station for haptic robot-based telerehabilitation after stroke
Ivanova, E.; Minge, M.; Schmidt, H.; Thüring, M.; Krüger, J.
Journal Article
2017Utilization of product lifecycle data from PLM systems in platforms for Industrial Symbiosis
Halstenberg, F.A.; Lindow, K.; Stark, R.
Journal Article
2017Verfahren, Anordnung und Computerprogrammprodukt zur Lageerfassung eines zu untersuchenden Objektes
Engel, Sebastian; Katanacho, Manuel; Keeve, Erwin; Uhlmann, Eckart
Patent
2017Verschleiß an Gleitschleifkörpern
Uhlmann, E.; Eulitz, A.; Männel, C.
Journal Article
2017Vibrationsunterstützte Senkerosion. Senkerosive Fertigung von Dichtschlitzen in einer Nickelbasislegierung mit Vibrationsunterstützung
Uhlmann, E.; Domingos, C.D.; Yabroudi, S.; Bolz, R.
Journal Article
2017Virtual Prototyping and Validation of Cpps within a New Software Framework
Neumeyer, S.; Exner, K.; Kind, S.; Hayka, H.; Stark, R.
Journal Article
2017Vorhersage zur Bauteilmaßhaltigkeit bei der additiven Fertigung mittels Schweißstruktursimulation
Biegler, Max; Rethmeier, Michael
Conference Paper
2017Wear behaviour of diamond coated micro-milling tools during micro machining
Uhlmann, E.; Kuche, Y.; Oberschmidt, D.; Polte, J.
Conference Paper
2017Wear performance of diamond coated WC-Co tools with a CrN interlayer
Chandran, M.; Sammler, F.; Uhlmann, E.; Akhvlediani, R.; Hoffman, A.
Journal Article
2017Wege in die Zukunft der Produktion. Ganzheitliche Mitarbeitereinbindung als Befähiger für die Transformation zur Industrie 4.0
Knothe, T.; Ullrich, A.; Weinert, N.
Journal Article
2017Werkzeuge
Oertwig, Nicole; Rimmelspacher, Sven O.; Vladova, Gergana; Ullrich, André; Gronau, Norbert; Gelec, Erdem
Book Article
2017Why not using ceramics - trends from ceramics research
Stepanyan, Marina; Seifert, Gerhard; Weiß, Torsten; Klein, Tiago Borsoi; Freund, Susanne
Journal Article
2017Wissensbasierte Entwicklung nachhaltiger Produkte
Lindow, Kai
: Meyer, H.J.; Stark, R.G.; Hansen, E.G.
Dissertation
2017The working posture controller: Automated assessment and optimisation of the working posture during the process
Nguyen, T.D.; Pilz, C.; Krüger, J.
Conference Paper
2017Zeitdiskretes echtzeitfähiges Berechnungsmodell
Uhlmann, E.; Reis, T.; Rendel, O.; Guhde, S.
Journal Article
201611. Berliner Runde - Neue Konzepte für Werkzeugmaschinen 2016. Begleitband
: Uhlmann, Eckart (Hrsg.)
Conference Proceedings
20163D human face reconstruction for surgical navigation
Katanacho, Manuel; Hoffmann, Jonas; Engel, Sebastian
Journal Article
2016Abrasive waterjet turning of titanium alluminides
Uhlmann, E.; Faltin, F.; Flögel, K.
Conference Paper
2016Adapting Ergonomic Assessments to Social Life Cycle Assessment
Chang, Y.-J.; Nguyen, T.D.; Finkbeiner, M.; Krüger, J.
Journal Article
2016Add-on Error Compensation Unit as Sustainable Solution for Outdated Milling Machines
Kianinejad, K.; Thom, S.; Kushwaha, S.; Uhlmann, E.
Journal Article
2016Additive Fertigung von Nickelbasis-Superlegierungen mittels Laserstrahlschmelzen am Beispiel von Diamalloy 4004NS
König-Urban, Kamilla
: Uhlmann, Eckart
Dissertation
2016Agentenbasierte Automatisierung des Betriebs Industrieller Produkt-Service Systeme
Raue, Niels
: Kohl, H.; Uhlmann, Eckart; Meier, H.
Dissertation
2016Agile competence management for flexible production systems
Oertwig, Nicole; Galeitzke, Mila; Hecklau, Fabian; Kohl, Holger
Conference Paper
2016Anforderungsanalyse einer Montagesimulationssoftware zwecks Aufwandsminimierung manueller Konfigurationsaufgaben
Brandenburg, Elisabeth; Geiger, Andreas; Rothenburg, Uwe; Stark, Rainer
Conference Paper
2016Antireflection coating of microstructures by anodizing and influence on the dimensional accuracy of structures
Uhlmann, E.; Kühne, S.; Malcher, M.; Jagodzinski, M.
Conference Paper
2016Automated dressing of graphite electrodes for electrical discharge machining (EDM) of seal slots in turbine components
Uhlmann, E.; Domingos, D.C.
Journal Article
2016Automated Vendor Selection for Industrial Service Shares
Uhlmann, E.; Sawczyn, N.; Raue, N.; Gabriel, C.
Journal Article
2016BBR - Wissensbilanz: Nicht nur die Technik im Blick haben!
Bolten, Henning; Wuscher, Sven
Book Article
2016Benefits of a learning factory in the context of lean management for the pharmaceutical industry
Rybski, C.; Jochem, R.
Journal Article
2016Bestimmung der Rissanfälligkeit von hochfesten Stählen beim Widerstandspunktschweißen
Frei, Julian; Suwala, Hubert; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2016BMA AG - Der süße Geschmack des Wissensmanagements
Stolte, Hartmut; Orth, Ronald
Book Article
2016Business model innovation: A comparative analysis
Steinhöfel, Erik; Kohl, Holger; Orth, Ronald
Conference Paper
2016Business model innovation: An intellectual capital perspective
Steinhöfel, Erik; Inkinen, Henri
Conference Paper
2016Camera pose estimation for a visual navigation system
Katanacho, Manuel; Hoffmann, Jonas
Conference Paper
2016CBN-micro-milling tools for machining hardened steel moulds
Uhlmann, E.; Oberschmidt, D.; Polte, M.; Polte, J.; Börnstein, J.
Conference Paper
2016Cloud- und dienstebasierte Produktionsplattformen
Vick, A.; Krüger, J.
Journal Article
2016Cloudbasierte Industrierobotersteuerungen
Guhl, J.; Vick, A.; Nguyen, T.; Wassermann, J.; Krüger, J.
Journal Article
2016CO2-Schneeentstehung und deren Wirkung auf die Effekte beim CO2-Schneestrahlen
Kretzschmar, Michael
: Rethmeier, M.; Uhlmann, Eckart; Weidner, E.
Dissertation
2016Combined laser additive manufacturing for complex turbine blades
Graf, Benjamin; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2016Combined laser additive manufacturing with powderbed and powder nozzle for turbine parts
Graf, Benjamin; Schuch, Michael; Petrat, Torsten; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2016Comparative analysis of dry-EDM and conventional EDM for the manufacturing of micro holes in Si3N4-TiN
Uhlmann, E.; Schimmelpfennig, T.-M.; Perfilov, I.; Streckenbach, J.; Schweitzer, L.
Journal Article
2016Concept of an offline correction method based on historical data for milling operations using industrial robots
Krüger, J.; Zhao, H.; Reis de Ascencao, G.; Jacobi, P.; Surdilovic, D.; Schöll, S.; Polley, W.
Journal Article
2016Contactless fault isolation for FinFET technologies with visible light and GaP SIL
Lohrke, H.; Scholz, P.; Beyreuther, A.; Ganesh, U.; Uhlmann, E.; Kuhne, S.; Jagodzinski, M.; Iwaki, Y.; Chivas, R.; Silverman, S.; Boit, C.
Conference Paper
2016Continuous maintenance and the future - Foundations and technological challenges
Roy, R.; Stark, R.; Tracht, K.; Takata, S.; Mori, M.
Journal Article
2016Critical depth of cut and asymptotic spindle speed for chatter in micro milling with process damping
Wang, J.J.; Uhlmann, E.; Oberschmidt, D.; Sung, C.F.; Perfilov, I.
Journal Article
2016Data management in collaborative interdisciplinary research projects - conclusions from the digitalization of research in sustainable manufacturing
Wang, W.M.; Göpfert, T.; Stark, R.
Journal Article
2016Definiertes Kantenrunden durch Strömungsschleifen
Uhlmann, E.; Roßkamp, S.
Journal Article
2016Development and evaluation of solar energy B2B solutions
Wrasse, Kevin R.; Hayka, Haygazun; Stark, Rainer
Journal Article
2016The development of a toolbox for assessing and communicating intellectual capital of SME in the context of the lending process of banks
Wuscher, Sven; Kohl, Holger
Conference Paper
2016Digitalisierte Produktion - Potentiale für eine nachhaltige urbane Wertschöpfung. Vorträge, Proceedings
: Uhlmann, Eckart (Hrsg.)
Conference Proceedings
2016DIN EN ISO 9001:2015. Vorbereitung und Stand der Umsetzung in deutschen Unternehmen
Rybski, Christoffer; Klünder, Richard
: Jochem, Roland (Hrsg.)
Study
2016Distributed real-time control service framework for human-robot interaction applications
Niebuhr, C.A.; Vick, A.
Conference Paper
2016Dressing of graphite electrodes for EDM of seal slots in nickel-base alloy MAR-M247
Uhlmann, E.; Domingos, D.C.
Journal Article
2016Dry ice blasting as a substitution for the conventional electroplating pre-treatments
Uhlmann, E.; Baira, E.M.; Jaczkowski, R.
Journal Article
2016Effect of cooling lubricant on surface roughness for turning stainless steel with binderless-cBN
Uhlmann, E.; Oberschmidt, D.; Polte, J.; Polte, M.; Huth-Herms, K.
Conference Paper
2016Effects of different cutting edge preparation methods on micro milling performance
Uhlmann, E.; Oberschmidt, D.; Kuche, Y.; Löwenstein, A.; Winker, I.
Journal Article
2016Einfluss von Herstellungs- und Lagerungsfaktoren auf die Eigenschaften von Trockeneispellets und das Strahlergebnis
Motschmann, Simon
: Uhlmann, Eckart
Dissertation
2016Einführung in die Fallstudien
Voigt, Stefan; Orth, Ronald
Book Article
2016Empirical study on quality management for product-service systems in industrial environment
Pasch, Florian; Rybski, Christoffer; Jochem, Roland
Journal Article
2016Energieeffiziente Nutzung von Industrierobotern für die Bearbeitung
Uhlmann, E.; Reinkober, S.; Mohnke, C.
Journal Article
2016Energy efficient usage of industrial robots for machining processes
Uhlmann, E.; Reinkober, S.; Hollerbach, T.
Journal Article
2016Entscheidende Veränderungen in der zukünftigen kollaborativen Produktentwicklung
Lünnemann, Pascal; Fresemann, Carina; Neumeyer, Sebastian; Wang, W.M.; Stark, R.
Conference Paper
2016Entscheidungsmethodik zur kompetenzbasierten Team-Organisation bei der Implementierung von Energiemanagementsystemen
Karcher, Phillip
: Jochem, Roland
Dissertation
2016Entwicklung eines Vorgehensmodells zur Einführung eines globalen Qualitätsmanagementsystem
Meentken, Felix
: Jochem, Roland
Dissertation
2016Entwicklung und Einsatz eines geschlossen-innengekühlten Fräswerkzeugs
Uhlmann, E.; Riemer, H.; Schröter, D.
Journal Article
2016Erlebbarkeit von Anlagenkomponenten im Kontext Virtuelle Inbetriebnahme in virtuellen Umgebungen
Geiger, Andreas; Rehfeld, Ingolf; Rothenburg, Uwe; Stark, Rainer
Conference Paper
2016The evolution from hybrid to blended to beyond prototyping
Lindow, Kai; Sernitzke, André
Book Article
2016Examination of spot welded joints with active thermography
Jonietz, F.; Myrach, P.; Suwala, H.; Ziegler, M.
Journal Article
2016Experimental determination of TRIP-parameter K for mild- and high-strength low-alloy steels and a super martensitic filler material
Neubert, S.; Pittner, A.; Rethmeier, M.
Journal Article
2016Feasibility of connecting machinery and robots to industrial control services in the cloud
Horn, C.; Krüger, J.
Conference Paper
2016Finite element modeling of an alternating current electromagnetic weld pool support in full penetration laser beam welding of thick duplex stainless steel plates
Bachmann, M.; Kunze, R.; Avilov, V.; Rethmeier, M.
Journal Article
2016Flexible, robot guided single-pass honing
Uhlmann, E.; Zimmermann, S.
Conference Paper
2016Fräsbearbeitung hochabrasiver Mineralgusswerkstoffe
Uhlmann, E.; Kaulfersch, F.
Journal Article
2016Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik. Jahresbericht 2015/2016
 
Annual Report
2016Full penetration laser beam welding of thick duplex steel plates with electromagnetic weld pool support
Avilov, V.; Fritzsche, A.; Bachmann, M.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2016Ganzheitliche Regelung der Energieeffizienz
Heimann, Oliver; Thiele, Gregor
Journal Article
2016Geometric deviations in the production of micro-milling tools and their influence on the cutting process
Uhlmann, E.; Oberschmidt, D.; Kuche, Y.; Polte, M.
Conference Paper
2016Geschickte Roboter für die Montage
Surdilovic, D.; Radojicic, J.; Bastidas-Cruz, A.; Konz, B.; Heyne, P.
Journal Article
2016Gleitschleifen - Verfahrensgrundlagen und Prozessmodellierung
Dethlefs, Arne
: Uhlmann, Eckart
Dissertation
2016Hard Turning of Hot Work and Cold Work Steels with HiPIMS and DCMS TiAlN Coated Carbide Inserts
Uhlmann, E.; Stawiszynski, B.; Leyens, C.; Heinze, S.; Sammler, F.
Journal Article
2016Herausforderungen für Unternehmen
Voigt, Stefan; Seidel, Holger; Orth, Ronald; Kohl, Holger
Book Article
2016Herstellung und Einsatz von Wendeltiefbohrern zur Hartbearbeitung
Richarz, Sebastian
: Uhlmann, Eckart
Dissertation
2016High level process map for Selective Laser Melting
Uhlmann, Eckart; Pastl Pontes, Rodrigo; Bergmann, André
Conference Paper
2016High Power Laser Beam Welding of Thick-walled Ferromagnetic Steels with Electromagnetic Weld Pool Support
Fritzsche, A.; Avilov, V.; Gumenyuk, A.; Hilgenberg, K.; Rethmeier, M.
Journal Article
2016High precision milling with a novel compliant machine tool
Uhlmann, E.; Oberschmidt, D.; Guhde, S.; Polte, M.
Conference Paper
2016High-pressure jet cutting with liquid CO2
Uhlmann, E.; John, P.
Conference Paper
2016Hochharte Schleifscheiben als 4-Stoffsystem
Uhlmann, E.; Thalau, J.
Journal Article
2016Holistic approach for human resource management in Industry 4.0
Hecklau, F.; Galeitzke, M.; Flachs, S.; Kohl, H.
Journal Article
2016Improved ergonomics via an intelligent movement and gesture detection jacket
Kuschan, J.; Schmidt, H.; Krüger, J.
Conference Paper
2016Increasing Performance and Energy Efficiency of Gas Metal Arc Welding by a High Power Tandem Process
Sproesser, G.; Pittner, A.; Rethmeier, M.
Journal Article
2016Individuelle Fertigung durch den Einsatz von Industrierobotern
Uhlmann, E.; Reinkober, S.; Mohnke, C.
Journal Article
2016Industrie 4.0 - Digitale Neugestaltung der Produktentstehung und Produktion am Standort Berlin
Stark, Rainer; Damerau, Thomas; Lindow, Kai
Book Article
2016The industry cockpit approach: A framework for flexible real-time production monitoring
Oertwig, N.; Gering, P.
Conference Paper
2016Influence of cutting edge preparation on the performance of micro milling tools
Uhlmann, E.; Oberschmidt, D.; Löwenstein, A.; Kuche, Y.
Journal Article
2016Influence of rail grinding process parameters on rail surface roughness and surface layer hardness
Uhlmann, E.; Lypovka, P.; Hochschild, L.; Schröer, N.
Journal Article
2016Influence of the rake angle on the surface formation during micro shaping of submicron optical structures in Au-layers
Uhlmann, E.; Kühne, S.; Jagodzinski, M.
Conference Paper
2016Information management platform for the application of sustainable product development methods
Pförtner, Anne; Buchert, Tom; Lindow, Kai; Stark, Rainer; Hayka, Haygazun
Journal Article
2016Innovation in product-service system engineering based on early customer integration and prototyping
Exner, Konrad; Damerau, Thomas; Stark, Rainer
Journal Article
2016Innovation through network management. A method for determining collaboration potential
Cap, Jan-Patrick; Blaich, Erik; Pavim, Alberto Xaver; Will, Markus; Kohl, Holger; Orth, Ronald
Conference Paper
2016Innovativer Fräsroboter für Großstrukturen
Uhlmann, E.; Reinkober, S.; Epping, M.
Journal Article
2016Instruction of digital human models through interaction in immersive virtual environments
Geiger, Andreas; Brandenburg, Elisabeth; Stark, Rainer
Conference Paper
2016Integrated evaluation system for the strategic management of innovation initiatives in manufacturing industries
Kohl, H.; Orth, R.; Riebartsch, O.; Hecklau, F.
Journal Article
2016Integrierte Strategieentwicklung
Will, Markus
Book Article
2016Intelligentes Elektroniksystem für Condition Monitoring in Industrie 4.0
Uhlmann, E.; Laghmouchi, A.; Ehrenpfordt, R.; Hohwieler, E.; Geisert, C.
Journal Article
2016Inter‐organizational network management in an innovation context: Combining ego and whole network perspective
Cap, Jan-Patrick; Blaich, Erik; Kohl, Holger; Raesfeld, Ariane von; Harms, Rainer; Will, Markus
Conference Paper
2016Investigations on vibration-assisted EDM-machining of seal slots in high-temperature resistant materials for turbine components. Part II
Uhlmann, E.; Domingos, D.C.
Journal Article
2016Konzepte zur energieautarken Kühlung von Lineardirektantrieben
Uhlmann, E.; Salein, S.
Journal Article
2016Kundenindividuelle Produktion durch intelligente Vernetzung
Uhlmann, E.
Journal Article
2016Laser based spot weld characterization
Jonietz, Florian; Myrach, Philipp; Rethmeier, Michael; Suwala, Hubert; Ziegler, Mathias
Conference Paper
2016Laser beam weldability of high-manganese austenitic and duplex stainless steel sheets
Quiroz, V.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2016Laser metal deposition as repair technology for a gas turbine burner made of Inconel 718
Petrat, Torsten; Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2016Low heat input gas metal arc welding for dissimilar metal weld overlays part I: The heat-affected zone
Frei, Julian; Alexandrov, Boian T.; Rethmeier, Michael
Journal Article
2016Machining of Carbon and Glass Fibre Reinforced Composites
Uhlmann, E.; Sammler, F.; Richarz, S.; Reucher, G.; Hufschmied, R.; Frank, A.; Stawiszynski, B.; Protz, F.
Journal Article
2016Machining of hygroscopic materials by high-pressure CO2 jet cutting
Uhlmann, E.; Bilz, M.; Mankiewicz, J.; Motschmann, S.; John, P.
Journal Article
2016Manufacturing, replication and assessment of microfluidics for blood plasma separation
Uhlmann, Eckart; Hein, Christoph; Polte, Mitchel; Polte, Julian; Spielvogel, Anja; Huth-Herms, Katrin; Oberschmidt, Dirk
Conference Paper
2016Methode auf Knopfdruck
Schober, J.; Lünnemann, P.; Jochem, R.; Stark, R.
Journal Article
2016Mikro- und Makrozerspanung von PM-Stählen
Uhlmann, Eckart; Richarz, Sebastian; Oberschmidt, Dirk
Conference Paper
2016Mittel gegen die Doppelbelastung
Jochem, R.; Behmer, F.
Journal Article
2016Model integration for managing dependencies between heterogeneous engineering data
Woll, Robert; Hayka, Haygazun; Stark, Rainer
Conference Paper
2016Model predictive control as a service - concept and architecture for use in cloud-based robot control
Vick, A.; Guhl, J.; Krüger, J.
Conference Paper
2016Model-based sustainable product development
Buchert, T.; Pförtner, A.; Bonvoisin, J.; Lindow, K.; Stark, R.
Conference Paper
2016Modellbasierte Prozessoptimierung für das Mikrofräsen
Mahr, Frederik Felix
: Uhlmann, Eckart
Dissertation
2016Modellbasiertes Systems Engineering - Neue Perspektiven für Systems Engineering
Stark, Rainer; Rothenburg, Uwe; Sünnetcioglu, Atakan
Journal Article
2016Modelling and simulation of grinding processes with mounted points. Part I of II
Uhlmann, E.; Koprowski, S.; Weingaertner, W.L.; Rolon, D.A.
Journal Article
2016Modelling and simulation of grinding processes with mounted points. Part II of II
Uhlmann, E.; Koprowski, S.; Weingaertner, W.L.; Rolon, D.A.
Journal Article
2016ModelTracer: User-friendly traceability for the development of mechatronic products
Sünnetcioglu, Atakan; Brandenburg, Elisabeth; Rothenburg, Uwe; Stark, Rainer
Journal Article
2016Modulare Fertigungsmanagementsysteme für Kundenauftragsindividuellen Prozesse
Knothe, T.; Orth, R.; Gering, P.; Wintrich, N.
Journal Article
2016Motion Tracking Applied in Assembly for Worker Training in different Locations
Müller, B.C.; Nguyen, T.D.; Dang, Q.-V.; Duc, B.M.; Seliger, G.; Krüger, J.; Kohl, H.
Journal Article
2016Movement visualisation in virtual reality rehabilitation of the lower limb: A systematic review
Ferreira dos Santos, L.; Christ, O.; Mate, K.; Schmidt, H.; Krüger, J.; Dohle, C.
Journal Article
2016Nachhaltige Unternehmensentwicklung aus ressourcenorientierter Perspektive
Orth, Ronald
: Kohl, Holger
Dissertation
2016A New Framework for Strategic Risk Analysis in a Global Pump Manufacturing Network
Niknejad, A.; Petrovic, D.; Popplewell, K.; Jäkel, F.W.; Pajkovska-Goceva, S.
Conference Paper
2016Niedrigdimensionale Modelle zur Simulation des dynamischen Verhaltens von Werkzeugmaschinen unter Berücksichtigung der Pose
Wintering, Jens Hermann
: Uhlmann, Eckart
Dissertation
2016A novel excitation method for pyroshock simulation
Houshmand, B.; Lacher, A.; Juengel, N.; Prasol, L.; Wagner, U. von; Uhlmann, E.
Journal Article
2016A novel leaf sequencing optimization algorithm which considers previous underdose and overdose events for MLC tracking radiotherapy. Technical Note
Wisotzky, E.; O'Brien, R.; Keall, P.J.
Journal Article
2016Numerical assessment and experimental verification of the influence of the Hartmann effect in laser beam welding processes by steady magnetic fields
Bachmann, M.; Avilov, V.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2016Numerical sensitivity analysis of TRIP-parameter K on weld residual stresses for steel S355J2+ N
Neubert, S.; Pittner, A.; Rethmeier, M.
Journal Article
2016Numerical simulation of solidification crack formation during laser beam welding of austenitic stainless steels under external load
Bakir, N.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2016Nutzenoptimierter Einsatz präventiver Qualitätsmethoden im Produktentstehungsprozess der Automobilindustrie
Heintzmann, Markus
: Jochem, Roland
Dissertation
2016Online Fault-monitoring in Machine Tools Based on Energy Consumption Analysis and Non-invasive Data Acquisition for Improved Resource-efficiency
Emec, S.; Krüger, J.; Seliger, G.
Journal Article
2016Online platform for conducting responsible research and innovations
Ajami, M.; Grabner, L.; Giambene, G.; Le, V.; Luong, D.; Pearson, J.
Conference Paper
2016Open Source CNC-Maschinensteuerung für die Trockenfunkenbahnerosion
Uhlmann, E.; Perfilov, I.; Schimmelpfennig, T.-M.
Journal Article
2016People are at the focus: Personal KM in an organizational context
Haunschild, Johanna; Schmieg, Hans Georg; Steinhöfel, Erik
Conference Paper
2016Personenzertifizierung für PLM-Verantwortliche
Woll, Robert; Kugelmeier, Dorothea; Hayka, Haygazun
Internet Contribution
2016Planning and reorganising quality management organisations – An empirical analysis of current practice
Behmer, F.; Jochem, R.; Hanke, H.
Journal Article
2016PLM Professional - Entstehung einer Disziplin
Stark, Rainer; Adolphy, Sebastian; Woll, Robert
Journal Article
2016Portable hands-free process assistant for gas turbine maintenance
Brandenburg, Elisabeth; Woll, Robert; Stark, Rainer
Journal Article
2016A Pragmatic Modeling Approach in Abrasive Flow Machining for Complex-Shaped Automotive Components
Uhlmann, E.; Mihotovic, V.; Roßkamp, S.; Dethlefs, A.
Journal Article
2016Principles for Interconnection of Modular Machine Tool Frames
Uhlmann, E.; Saoji, M.; Peukert, B.
Journal Article
2016PRoCeeD: Process state prediction for CRITIS using process inherent causal data and discrete event models
Horn, C.; Krüger, J.
Conference Paper
2016Process Behaviour of Super-hard Cutting Materials for Machining Mineral Cast
Uhlmann, E.; Kaulfersch, F.
Journal Article
2016Process chains for high-precision components with micro-scale features
Uhlmann, E.; Mullany, B.; Biermann, D.; Rajurkar, K.P.; Hausotte, T.; Brinksmeier, E.
Journal Article
2016Process-oriented design methodology for the (inter-) organizational intellectual capital management
Galeitzke, Mila; Oertwig, Nicole; Orth, Ronald; Kohl, H.
Journal Article
2016Product development in collaborative networks - An expert view on current challenges and future trends
Wang, Wei Min; Lünnemann, Pascal; Neumeyer, Sebastian; Hayka, Haygazun; Stark, Rainer
Conference Paper
2016Prototype for enhanced product data acquisition based on inherent features in logistics
Fechteler, M.; Schlüter, M.; Krüger, J.
Conference Paper
2016Prozessauslegung zum Schnellhubschleifen von Hochleistungskeramik
Sammler, Christoph
: Uhlmann, Eckardt
Dissertation
2016Prozessmodell für selektives Laserstrahlschmelzen
Uhlmann, E.; Pastl Pontes, R.; Bergmann, A.
Journal Article
2016Qualitätsreferenzmodell für die Produktion von Unikaten und Kleinserien
Rößle, Dominik
: Krüger, Jörg; Jochem, R.; Woll, Ralf
Dissertation
2016Quantitative Betriebsmittelbedarfsplanung für die getaktete Fließfertigung
Dinse, Jakob
: Stark, Rainer
Dissertation
2016Reference ontologies to support the development of global production network systems
Palmer, C.; Urwin, E.N.; Pinazo-Sanchez, J.M.; Sánchez Cid, F.; Palacios Rodriguez, E.; Pajkovska-Goceva, S.; Marr Young, R.I.
Journal Article
2016Ein Referenzmodell für Wissensmanagement
Mertins, Kai; Kohl, Ina; Orth, Ronald
Book Article
2016Reflections and early evidence of the importance of presence for three types of feedback in virtual motor rehabilitation
Schüler, T.; Santos, L.F. dos; Hoermann, S.
Book Article
2016Resource optimized product design - assessment of a product's life cycle resource efficiency by combining LCA and PLM in the product development
Ko, Nathanael; Graf, Roberta; Buchert, Tom; Kim, Marcus; Wehner, Daniel
Journal Article
2016A retrofitting concept for integration of machinery with legacy interfaces into cloud manufacturing architectures
Horn, C.; Krüger, J.
Conference Paper
2016Seamless Interrelation Between Business Strategies and Tactical Planning
Jäkel, F.-W.; Schlosser, S.; Otto, B.; Petrovic, D.; Niknejad, A.
Conference Paper
2016Sensitivity analysis of the residual stress state in friction stir welding of high strength aluminum alloy
Bachmann, M.; Rethmeier, M.; Wu, C.S.
Journal Article
2016Simulationsgestützte Methoden und Tools für die virtuelle Absicherung flexibler Bauteile in der Automobilentwicklung
Hofheinz, N.; Brandenburg, E.; Stark, R.
Journal Article
2016Situation adapted field service support using business process models and ICT based human-machine-interaction
Uhlmann, E.; Geisert, C.; Raue, N.; Gabriel, C.
Journal Article
2016SMART Engineering im Kontext Indsutrie 4.0: Baukastensysteme für die erlebbare Absicherung von Montageanlagen
Kind, Simon; Exner, Konrad; Stark, Rainer; Neumeyer, Sebastian
Conference Paper
2016Solutions for sustainable machining
Uhlmann, E.; Peukert, B.; Thom, S.; Prasol, L.; Fürstmann, P.; Sammler, F.; Richarz, S.
Conference Paper
2016Stellgrößen beim Doppelseitenplanschleifen mit Planetenkinematik
Uhlmann, E.; List, M.; Lichtschlag, L.
Journal Article
2016Steuerungstechnik aus der Cloud
Kretschmer, Felix; Borisov, Alexander; Pöschko, Reiner; Chemnitz, Moritz; Vick, Axel
Journal Article
2016Strahlschneiden mit flüssigem CO2 als Strahlmedium
Uhlmann, E.; John, P.; Mankiewicz, J.
Journal Article
2016Strategien zur Erreichung eines konstanten Volumenaufbaus bei der additiven Fertigung mittels Laser-Pulver-Auftragschweißen
Petrat, Torsten; Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2016Studie Wissensstandort Deutschland
Kohl, Holger; Orth, Ronald; Steinhöfel, Erik
Book Article
2016Studie zur "Zukunft der unternehmensübergreifenden Kollaboration"
Neumeyer, Sebastian; Müller, Patrick; Lünnemann, Pascal; Wang, Wie-Min; Hayka, Haygazun; Stark, Rainer
Journal Article
2016Surface reproduction accuracy of holographic design features for machine components fabricated by a combination of TiN-physical vapour deposition and a specific subsequent galvanic process
Uhlmann, Eckart; Oberschmidt, Dirk; Frenzel, Stephanie; Polte, Julian; Matthiesen, Johannes; Böge, Manfred
Conference Paper
2016Surgical navigation with QR codes
Katanacho, Manuel; Cadena, Wladimir de la; Engel, Sebastian
Journal Article
2016Sustainability Factors for PSS Business Models
Barquet, A.P.; Seidel, J.; Seliger, G.; Kohl, H.
Journal Article
2016Sustainable product service systems - from concept creation to the detailing of a business model for a bicycle sharing system in Berlin
Barquet, Ana Paula; Seidel, Johannes; Buchert, Tom; Galeitzke, Mila; Neugebauer, Sabrina; Oertwig, Nicole; Rozenfeld, Henrique; Seliger, Günther
Journal Article
2016Sustainable Welding Process Selection Based on Weight Space Partitions
Sproesser, G.; Schenker, S.; Pittner, A.; Borndörfer, R.; Rethmeier, M.; Chang, Y.-J.; Finkbeiner, M.
Journal Article
2016A systematic literature review on modular product design
Bonvoisin, J.; Halstenberg, F.; Buchert, T.; Stark, R.
Journal Article
2016Systems Engineering im Kontext der unternehmensübergreifenden Produktentwicklung
Neumeyer, Sebastian; Lünnemann, Pascal; Woll, Robert
Conference Paper
2016Trockenfunkenerosives Feinbohren von Hochleistungswerkstoffen
Schimmelpfennig, Tassilo-Maria
: Uhlmann, Eckart
Dissertation
2016Trust restoration in workplace relationships: Multi-level analysis of (Mis)trusting
Ikonen, M.; Savolainen, T.; Lopez-Fresno, P.; Kohl, H.
Conference Paper
2016Twisted deep hole drilling tools for hard machining
Uhlmann, E.; Richarz, S.
Journal Article
2016Two steps to IT transparency: A practitioner’s approach for a knowledge based analysis of existing IT landscapes in SME
Kohl, Holger; Orth, Ronald; Haunschild, Johanna; Schmieg, Hans Georg
Conference Paper
2016Using process models to support customer specific production processes
Dennert, A.; Wollschlaeger, M.; Gering, P.; Knothe, T.; Lemcke, A.
Conference Paper
2016Using RGB-D sensors for the detection of abandoned luggage
Ajami, M.; Lang, B.
Conference Paper
2016Utilization of Thermal Energy to Compensate Quasi-static Deformations in Modular Machine Tool Frames
Uhlmann, E.; Saoji, M.; Peukert, B.
Journal Article
2016Verfahren zur schnellen, digitalen Modellbildung für Inspektions- und Reengineeringprozesse
Grosser, Hendrik
: Stark, R.
Dissertation
2016Virtual prototyping and validation of CPPS within a new software framework
Neumeyer, Sebastian; Exner, Konrad; Kind, Simon; Hayka, Haygazun; Stark, Rainer
Conference Paper
2016Welding with high-power lasers: Trends and developments
Bachmann, M.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2016Werkzeugschleifen mit Hybridschleifscheiben
Uhlmann, E.; Schröer, N.
Journal Article
2016Wissen erfolgreich bewahren
Wuscher, Sven
: Kohl, Holger (Hrsg.)
Book
2016Wissensbewahrung ausscheidender Mitarbeiter
Wuscher, Sven; Voigt, Stefan; Fischer, Martin
Book Article
2016Wissensbilanz
Mertins, Kai; Will, Markus; Orth, Ronald
Book Article
2016Wissensmamangement im Enterprise 2.0
Voigt, Stefan; Steinhöfel, Erik
Book Article
2016Wissensmanagement im Mittelstand
: Kohl, Holger (Hrsg.); Mertins, Kai (Hrsg.); Seidel, H. (Hrsg.)
Scientific Anthology
2016Wissensmanagement in Expertennetzwerken
Lackhove, Josef; Hanke, Joachim; Orth, Ronald
Book Article
2016Wissensmanagement mit Wiki-Systemen
Voigt, Stefan; Orth, Ronald
Book Article
2016Wissensorientierte Analyse und Gestaltung von Geschäftsprozessen
Orth, Ronald; Mertins, Kai
Book Article
2016Wissenssicherung bei BASF: Wie der Chemiekonzern den demografischen Wandel meistert
Stautmeister, René; Hattendorff, Jutta; Wuscher, Sven
Journal Article
2016Der WM-Prozessassistent
Orth, Ronald; Wintrich, Nikolaus
Book Article
2016The working posture controller: Automated adaptation of the work piece pose to enable a natural working posture
Nguyen, T.D.; Bloch, C.; Krüger, J.
Journal Article
2016Zukunft der unternehmensübergreifenden Kollaboration
Lünnemann, Pascal; Müller, Patrick; Neumeyer, Sebastian; Wang, Wei Min; Hayka, Haygazun; Kirsch, Lucas
: Drewinksi, Roland (Hrsg.); Hayka, Haygazun (Hrsg.); Müller, Patrick (Hrsg.); Stark, Rainer (Hrsg.)
Study
2016Die Zukunft der unternehmensübergreifenden Produktentwicklung
Neumeyer, Sebastian; Hayka, Haygazun; Stark, Rainer
Book Article
2016Zustandsüberwachung in der Cloud
Uhlmann, E.; Laghmouchi, A.; Hohwieler, E.; Geisert, C.
Journal Article
2015Absicherung des Innovationserfolgs unter Berücksichtigung des Open-Innovation-Ansatzes
Rothe, Manuel
Dissertation
2015Adaptive backstepping controller with Kalman state estimator for stabilisation and manoeuvre of pedestrian controlled uniaxial transport vehicles
Brüning, M.; Thiele, Gregor; Schönewolf, W.; Krüger, J.
Conference Paper
2015Adaptive Qualification and Assistance Modules for Manual Assembly Workplaces
Nguyen, T.D.; McFarland, R.; Kleinsorge, M.; Krüger, J.; Seliger, G.
Journal Article
2015Additive manufacturing of titanium alloy for aircraft components
Uhlmann, E.; Kersting, R.; Klein, T.B.; Cruz, M.F.; Borille, A.V.
Journal Article
2015Additive process chain using selective laser melting and laser metal deposition
Graf, Benjamin; Schuch, Michael; Kersting, Robert; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2015Addressing sustainability and flexibility in manufacturing via smart modular machine tool frames to support sustainable value creation
Peukert, B.; Benecke, S.; Clavell, J.; Neugebauer, S.; Nissen, N.F.; Uhlmann, E.; Lang, K.-D.; Finkbeiner, M.
Journal Article
2015Advances in Tool Grinding and Development of End Mills for Machining of Fibre Reinforced Plastics
Uhlmann, E.; Schröer, N.
Journal Article
2015Anforderungsanalyse für die nutzergerechte Gestaltung eines Bedienkonzepts für robotergestützte Telerehabilitationssysteme in der motorischen Schlaganfallrehabilitation
Ivanova, E.; Freydank, E.; Achner, J.; Klemke, J.; Schrader, M.; Wernicke, S.; Bryl, B.; Schauer, M.; Schmidt, H.; Jöbges, M.; Hesse, S.; Krüger, J.
Conference Paper
2015Auftragsindividuelle Fertigungsprozesse im Griff
Knothe, T.; Oertwig, Nicole; Strohmeier, K.; Reinkober, Sascha
Journal Article
2015Automated marker tracking using noisy X-ray images degraded by the treatment beam
Wisotzky, E.; Fast, M.F.; Oelfke, U.; Nill, S.
Journal Article
2015Automated vision-based live ergonomics analysis in assembly operations
Krüger, J.; Nguyen, T.D.
Journal Article
2015An Automation Approach Based on Workflows and Software Agents for Industrial Product-Service Systems
Uhlmann, E.; Gabriel, C.; Raue, N.
Journal Article
2015Automatisierte Qualitätskontrolle
Uhlmann, E.; Oberschmidt, D.; Löwenstein, A.; Kuche, Y.; Wiemann, S.
Journal Article
2015Beeinflussung des Wasserabrasivstrahls
Uhlmann, E.; Flögel, K.; Dahlmann, M.
Journal Article
2015Binderless-PCD as cutting material for micro milling of cemented carbide moulds
Uhlmann, Eckart; Oberschmidt, Dirk; Löwenstein, Armin; Polte, Julian; Gonia, D.
Conference Paper
2015Blasting with solid carbon dioxide: Investigation of thermal and mechanical removal mechanisms
Uhlmann, E.; Hollan, R.
Journal Article
2015Blendensystem für eine Strahlenquelle sowie Vorrichtung und Verfahren zum Aufnehmen eines Projektionsbilds und zum Bestimmen einer Relativposition zwischen einer Strahlenquelle und einem Strahlendetektor
Keeve, Erwin; Engel, Sebastian; Stopp, Fabian; Uhlmann, Eckart; Käseberg, Marc
Patent
2015Build-up strategies for generating components of cylindrical shape with laser metal deposition
Petrat, Torsten; Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2015Building up National Intellectual Capital Center as a national innovation strategy
Wuscher, S.; Kohl, H.; Orth, R.
Conference Paper
2015Chapter 4: Micro-electrical Discharge Machining
Uhlmann, E.; Röhner, M.; Langmack, M.; Schimmelpfennig, T.-M.
Book Article
2015A chemical consideration of binderless-cBN as cutting material for ultra-precision turning
Uhlmann, Eckart; Sturm, H.; Oberschmidt, Dirk; Polte, Julian; Polte, Mitchel; Lorenz, D.; Frenzel, S.
Conference Paper
2015Comparison of conventional and dry electrical discharge machining
Schimmelpfennig, Tassilo-Maria; Perfilov, Ivan; Streckenbach, Jan; Uhlmann, Eckart
Conference Paper
2015Computerized mirror therapy with augmented reflection technology for stroke rehabilitation: A feasibility study in a rehabilitation center
Hoermann, S.; Ferreira dos Santos, L.; Morkisch, N.; Jettkowski, K.; Sillis, M.; Cutfield, N.J.; Schmidt, H.; Hale, L.; Krüger, J.; Regenbrecht, H.; Dohle, C.
Conference Paper
2015Conceptualizing a network process model based production platform
Knothe, T.; Zoch, A.; Meißner, M.
Conference Paper
2015Condition monitoring in the cloud
Uhlmann, E.; Laghmouchi, A.; Hohwieler, E.; Geisert, C.
Journal Article
2015Content representation and pairwise feature matching method for virtual reconstruction of shredded documents
Pöhler, D.; Zimmermann, R.; Widdecke, B.; Zoberbier, H.; Schneider, J.; Nickolay, B.; Krüger, J.
Conference Paper
2015Contextual representations for enterprise model application (C.R.E.M.A.)
Wintrich, N.; Meißner, M.
Conference Paper
2015Control of robots and machine tools with an extended factory cloud
Vick, A.; Horn, C.; Rudorfer, M.; Kruger, J.
Conference Paper
2015CPS-basiertes Life Cycle Monitoring und Management
Uhlmann, E.; Laghmouchi, A.; Geisert, C.
Journal Article
2015Cutting of steel X13NiMnCuAl4-2-1-1 with micro milling tools using a defined cutting edge preparation
Uhlmann, Eckart; Oberschmidt, Dirk; Löwenstein, Armin; Kuche, Y.; Winker, I.
Conference Paper
2015Design and concept of a haptic robotic telerehabilitation system for upper limb movement training after stroke
Ivanova, E.; Krüger, J.; Steingräber, R.; Schmid, S.; Schmidt, H.; Hesse, S.
Conference Paper
2015Design and manufacturing of a sustainable pedelec
Buchert, T.; Steingrimsson, J.G.; Neugebauer, S.; Nguyen, T.D.; Galeitzke, M.; Oertwig, N.; Seidel, J.; McFarland, R.; Lindow, K.; Hayka, H.; Stark, R.
Journal Article
2015Designing virtual environments for motor rehabilitation: Towards a framework for the integration of best-practice information
Schüler, T.; Ferreira dos Santos, L.; Hoermann, S.
Conference Paper
2015Detection of counterfeit by the usage of product inherent features
Blankenburg, M.; Horn, C.; Krüger, Jörg
Journal Article
2015Development and optimization of process chains for the micro mold industry: Technological limits of the micro milling and micro die-sinking EDM technologies
Uhlmann, Eckart; Domingos, David C.; Kühne, S.; Zanatta, A.M.; Gomes, J.O.
Conference Paper
2015Discrete Element Modelling of Drag Finishing
Uhlmann, E.; Eulitz, A.; Dethlefs, A.
Journal Article
2015Do quality costs still matter?
Rassfeld, C.; Behmer, F.; Durlich, M.; Jochem, R.
Journal Article
2015Dry ice blasting instead of bating
Uhlmann, E.; Baira, E.M.
Journal Article
2015Durchgängiger Traceability-Prozess im Systems Engineering
Sünnetcioglu, Atakan; Brandenburg, Elisabeth; Auricht, Maik; Stark, R.
Conference Paper
2015Efficient calibration of cable-driven parallel robots with variable structure
Surdilovic, D.; Radojicic, J.; Bremer, N.
Conference Paper
2015Einsatz der Schweißsimulation zur Verzugsoptimierung an Praxisbauteilen
Thater, R.; Pittner, A.; Rethmeier, M.
Conference Paper
2015Einsatz von Bor-dotierten Diamanten beim sensorintegrierten UP-Diamantdrehen
Uhlmann, Eckart; Oberschmidt, Dirk; Frenzel, Stephanie; Polte, Julian
Journal Article
2015Einsatzverhalten von Schleifbändern mit hochharten Schleifmitteln
Heitmüller, Florian
: Uhlmann, Eckart
Dissertation
2015Entwicklung einer Herstellungstechnologie für PKD-Mikrofräswerkzeuge
Uhlmann, E.; Oberschmidt, D.; Polte, M.; Börnstein, J.
Journal Article
2015Entwicklung eines aktiven Kompensationstisches
Uhlmann, E.; Thom, S.; Kianinejad, K.; Kushwaha, S.; Rathenow, P.
Journal Article
2015Entwicklungstool zur Konfiguration und Verknüpfung von Condition Monitoring-Algorithmen
Uhlmann, Eckart; Laghmouchi, Abdelhakim
Journal Article
2015Environmental and Social Life Cycle Assessment of Welding Technologies
Chang, Y.-J.; Sproesser, G.; Neugebauer, S.; Wolf, K.; Scheumann, R.; Pittner, A.; Rethmeier, M.; Finkbeiner, M.
Journal Article
2015ePuzzler - Automatisierte Virtuelle Rekonstruktion der zerrissenen Stasi-Akten
Schneider, J.; Nickolay, B.
Book Article
2015Erhöhen der Dämpfung hohler Leichtbaustrukturen
Uhlmann, E.; Peukert, B.
Journal Article
2015An Evaluation of Building Sets Designed for Modular Machine Tool Structures to Support Sustainable Manufacturing
Peukert, B.; Saoji, M.; Uhlmann, E.
Journal Article
2015Evaluation of different approaches for modeling phase transformations in machining simulation
Schulze, V.; Uhlmann, E.; Mahnken, R.; Menzel, A.; Biermann, D.; Zabel, A.; Bollig, P.; Ivanov, I.M.; Cheng, C.; Holtermann, R.; Bartel, T.
Journal Article
2015Evaluation of technological trends and demands of the manufacturing industry to a center of R&D&I
Silva Andrade, L.P.C. da; Will, M.; Breda Mascarenhas, L.A.; Silva, R.C. da; Oliveira Gomes, J. de
Journal Article
2015Der Faktor Wissen
Orth, Ronald; Karcher, Phillip
Journal Article
2015Flexible manufacturing with an additive process chain. Design, production and surface finish
Uhlmann, Eckart; Rethmeier, Michael; Graf, Benjamin; Kersting, Robert; Bergmann, André
Conference Paper
2015Flexible, robot guided single-pass honing
Uhlmann, E.; Zimmermann, S.
Journal Article
2015Fostering organisational innovation through intellectual capital management
Galeitzke, M.; Steinhöfel, E.; Orth, R.; Kohl, H.
Conference Paper
2015Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik. Jahresbericht 2014/2015
 
Annual Report
2015Geschäftsmodelle der Wiederaufbereitung für Hersteller von Originalteilen
Widera, Henry
: Seliger, Günther
Dissertation
2015Globales Qualitätsmanagement. Basis für eine erfolgreiche internationale Unternehmensführung
: Jochem, Roland (Hrsg.); Menrath, Martin
Scientific Anthology
2015Graphical visualization of sustainable manufacturing aspects for knowledge transfer to public audience
Wang, W.-M.; Wolter, L.; Lindow, K.; Stark, R.
Journal Article
2015Hybrid simulators for product service-systems - Innovation potential demonstrated on urban bike mobility
Beckmann-Dobrev, B.; Kind, S.; Stark, R.
Journal Article
2015Industrie 4.0: Perspektive für Deutschland
Uhlmann, E.
Journal Article
2015The influence of immersive driving environments on human-cockpit evaluations
Reich, D.; Stark, R.
Conference Paper
2015Influence of the Built-up Edge on the Stress State in the Chip Formation Zone During Orthogonal Cutting of AISI1045
Uhlmann, E.; Henze, S.; Brömmelhoff, K.
Journal Article
2015Influence of track gringing process on rail surface and subsurface topology
Uhlmann, E.; Lypovka, P.
Journal Article
2015Information Retrieval Techniken zum Automatisierten Erstellen von Tracelinks im Model Based Systems Engineering
Sünnetcioglu, Atakan; Caspar, Joachim; Dörr, Sebastian; Brandenburg, Elisabeth; Fauquembergue, Marc
Conference Paper
2015The innovation network scoreboard: Towards key performance indicators for the assessment of innovation networks
Kohl, H.; Cap, J.-P.; Blaich, E.; Raesfeld, A. von
Conference Paper
2015Innovative high-performance ceramics – Challenge for the life cycle engineering of turbomachinery
Uhlmann, E.; Bilz, M.; Baumgarten, J.; Klein, T.B.
Journal Article
2015Integrated process oriented requirements management
Wintrich, N.; Gering, P.; Meissner, M.
Conference Paper
2015Integrating ontology into PLM-tools to improve sustainable product development
Starka, R.; Pförtner, A.
Journal Article
2015Intellectual capital statement as a strategic management tool: The European approach
Will, M.
Book Article
2015Intellectual capital statements as a driver for regional development
Kohl, H.; Wuscher, S.; Orth, R.; Steinhöfel, E.
Conference Paper
2015Intelligent configuration of condition monitoring algorithms
Laghmouchi, Abdelhakim; Hohwieler, Eckhard; Geisert, Claudio; Uhlmann, Eckart
Conference Paper
2015Intelligent systems configuration services for flexible dynamic global production networks
Young, Robert I.M.; Popplewell, K.; Jäkel, Frank-Walter; Bullar, Gash; Otto, Boris
Conference Paper
2015Intelligente Werkstattfertigung: Steuerung von Serienprodukten für die Werkstattfertigung mit Industrie 4.0-Lösungen
Uhlmann, E.; Schallock, B.; Otto, F.
Journal Article
2015Interaktionsfähige Roboter - Vielseitige Entwicklungsaussichten
Surdilovic, D.; Radojicic, J.; Bastidas-Cruz, A.
Journal Article
2015Investigating user response to a hybrid sketch based interface for creating 3D virtual models in an immersive environment
Bonnici, A.; Israel, J.H.; Muscat, A.M.; Camilleri, D.; Camilleri, K.; Rothenburg, U.
Conference Paper
2015Investigation into Energy Efficiency of Outdated Cutting Machine Tools and Identification of Improvement Potentials to Promote Sustainability
Kianinejad, K.; Uhlmann, E.; Peukert, B.
Journal Article
2015Investigation on additive manufacturing of tungsten Carbide-cobalt by selective laser melting
Uhlmann, E.; Bergmann, A.; Gridin, W.
Journal Article
2015Keramische Schaftfräswerkzeuge für die Hochgeschwindigkeitsbearbeitung von Nickelbasis-Legierungen
Wacinski, Manuel
: Uhlmann, Eckart
Dissertation
2015Laser and hybrid laser-arc welding of cryogenic 9%Ni steel for construction of LNG storage tanks
Gook, Sergej; Forquer, Matthew; Gumenyuk, Andrey; Rethmeier, Michael; El-Batahgy, Abdel-Monem
Conference Paper
2015Laser-GMA-hybrid welding of longitudinally welded large-diameter pipes of grades API-X80/X100 to increase the toughness and the production efficiency
Rethmeier, Michael; Gumenyuk, Andrey; Gook, Sergej
Conference Paper
2015Laser-Pulver-Auftragschweißen zum additiven Aufbau komplexer Formen
Petrat, Torsten; Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2015Laserstrahl-MSG-Hybridschweißen von Rohren aus Hochfestem Stahl API-X80/ -X100
Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2015Laserwendel- und funkenerosives Mikrobohren
Langmack, Malte
: Uhlmann, E.
Dissertation
2015Die Lernfabrik
Seliger, G.; Jochem, R.; Straube, F.; Kohl, H.
Journal Article
2015Life Cycle Assessment of welding technologies for thick metal plate welds
Sproesser, G.; Chang, Y.-J.; Pittner, A.; Finkbeiner, M.; Rethmeier, M.
Journal Article
2015Maintenance, repair and overhaul in through-life engineering services
Uhlmann, Eckart; Stark, Rainer; Rethmeier, Michael; Baumgarten, Jeannette; Bilz, Martin; Geister, Claudio; Graf, Benjamin; Gumenyuk, Andrey; Grosser, Hendrik; Heitmüller, Florian; Manthei, Marcel; Reinkober, Sascha
Book Article
2015Marker-Less Augmented Reality for Human Robot Interaction
Košnar, K.; Vick, A.; Přeučil, L.; Krüger, J.
Conference Paper
2015Method for automated structuring of product data and its applications
Adolphy, S.; Grosser, H.; Kirsch, L.; Stark, R.
Journal Article
2015Methode zur Entwicklung von Geschäftsprozessen Industrieller Produkt-Service Systeme mit Prozess-Fraktalen
Gabriel, Christian
: Uhlmann, E. (Hrsg.)
Dissertation
2015Methodology for a competency-based team organization in accordance with ISO 50001
Karcher, Phillip; Fritz, N.; Rumöller, L.; Theiss, T.; Jochem, R.
Conference Paper
2015Mikrozerspanung von rostfreiem Stahl mit PcBNoB
Uhlmann, E.; Oberschmidt, D.; Polte, J.
Journal Article
2015Model-based evaluation environment for sustainability
Oertwig, N.; Wintrich, N.; Jochem, R.
Journal Article
2015Multi-criteria decision making as a tool for sustainable product development: Benefits and obstacles
Buchert, T.; Neugebauer, S.; Schenker, S.; Lindow, K.; Stark, R.
Journal Article
2015A multi-mechanism model for cutting simulations based on the concept of generalized stresses
Cheng, C.; Mahnken, R.; Ivanov, I.M.; Uhlmann, E.
Conference Paper
2015Nettoyage mécanique électrostatique et numérisation simultanée des deux faces de documents historiques sur papier
Hähner, U.; Zoberbier, H.; Banik, G.
Journal Article
2015Netzfreie Zerspanungssimulation mit der Finite-Pointset-Methode
Gerstenberger, Robert
Dissertation
2015Das Neue zur Nutzung führen
Geiger, A.
Journal Article
2015New machine tool concept for two-side ultra-precision machining
Uhlmann, Eckart; Oberschmidt, Dirk; Polte, Julian; Polte, Mitchel; Guhde, S.
Conference Paper
2015Notwendige Voraussetzungen für die Realisierung von Industrie 4.0
Stark, R.; Kim, M.; Damerau, T.; Neumeyer, S.; Vorsatz, T.
Journal Article
2015A Novel Finite Element Approach to Modeling Hard Turning in Due Consideration of the Viscoplastic Asymmetry Effect
Uhlmann, E.; Mahnken, R.; Ivanov, I.M.; Cheng, C.
Journal Article
2015A Novel Method for Specimen Preparation and Analysis of CVD Diamond Coated Tools Using Focussed Ion Beams (FIB) and Scanning Electron Microscopy (SEM)
Berger, D.; Uhlmann, E.; Dethlefs, I.
Journal Article
2015Numerical investigation of energy input characteristics for high-power fiber laser welding at different positions
Sohail, M.; Han, S.-W.; Na, S.-J.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2015Numerical modeling for the effect of pin profiles on thermal and material flow characteristics in friction stir welding
Su, H.; Wu, C.S.; Bachmann, M.; Rethmeier, M.
Journal Article
2015Nutzerzentrierte Gestaltung von VR-Systemen für die motorische Neurorehabilitation
Lutz, O.H.-M.; Schmidt, H.; Krüger, J.
Conference Paper
2015Oberflächennachbearbeiten eines SLM-Ventils mit Tauchgleitläppen
Uhlmann, Eckart; Löwenstein, Armin; Bergmann, Andre
Journal Article
2015Ontologiebasierte Datenintegration für das Modellbasierte Systems Engineering
Woll, R.; Hayka, H.; Stark, R.
Conference Paper
2015An ontology for global production network design and reconfiguration
Palmer, C.; Urwin, E.N.; Rodríguez, E.P.; Cid, F.S.; Pinazo-Sánchez, J.M.; Pajkovska-Goceva, S.; Young, R.
Conference Paper
2015Optimierte Werkzeugbahnen für die Schleifbearbeitung von Hochleistungskeramik mit Schleifstiften
Uhlmann, E.; Bruckhoff, J.
Journal Article
2015Optimierung eines Maschinengestells von kleinen Werkzeugmaschinen für kleine Werkstücke
Perfilov, Ivan; Streckenbach, Jan; Schweitzer, Luiz; Uhlmann, Eckart
Conference Paper
2015Optimized CO2 snow blasting systems
Uhlmann, E.; Kretzschmar, M.
Journal Article
2015Planning and control of maintenance, repair and overhaul operations of a fleet of complex transportation systems: A cyber-physical system approach
Trentesaux, D.; Knothe, T.; Branger, G.; Fischer, K.
Conference Paper
2015Polyhydroxyalkanoates production with Ralstonia eutropha from low quality waste animal fats
Riedel, S.L.; Jahns, S.; Koenig, S.; Bock, M.C.E.; Brigham, C.J.; Bader, J.; Stahl, U.
Journal Article
2015Possibilities for compensating a higher heat input, in particular by the torch offset relative to the top sheet at the fillet weld on a lap joint
Ebert-Spiegel, M.; Goecke, S.-F.; Rethmeier, M.
Journal Article
2015A practical approach to process-oriented knowledge management
Kohl, H.; Orth, R.; Steinhöfel, E.
Journal Article
2015Process development and optimization in the die-sinking μ-EDM of micro molds for the dental industry
Uhlmann, Eckart; Domingos, David C.; Oberschmidt, Dirk; Zanatta, A.M.; Gomes, J.O.
Conference Paper
2015Providing product-service-systems - The long way from a product OEM towards an original solution provider (OSP)
Schnürmacher, C.; Hayka, H.; Stark, R.
Journal Article
2015Prozessstrategien beim NC-Formschleifen mit Schleifstiften
Borsoi Klein, Tiago
: Uhlmann, Eckart
Dissertation
2015Qualitätsorganisation. Struktur, Planung und Reorganisation des Qualitätswesens in der industriellen Praxis
Behmer, Falk; Hanke, Henry
: Jochem, Roland (Hrsg.)
Study
2015Qualitätssicherung der Traceability Modelle
Sünnetcioglu, A.; Brandenburg, E.; Rothenburg, U.; Stark, R.
Conference Paper
2015Quality optimized additive manufacturing through measuring system analysis
Uhlmann, E.; John, P.; Kashevko, V.; Gerlitzky, G.; Bergmann, A.
Conference Paper
2015Rechnerunterstützte Optimierung – Möglichkeiten und Grenzen
Menevidis, Zaharya; Ajami, Mohamad
Conference Paper
2015Reconstruction of 3D transient temperature field for fusion welding processes on basis of discrete experimental data
Pittner, A.; Karkhin, V.; Rethmeier, M.
Journal Article
2015Ressourceneffizientes Produktdesign durch PLM-integrierte Generierung und Auswahl von Produktvarianten
Buchert, T.; Kim, M.; Graf, R.; Ko, N.; Lindow, K.; Stark, R.
Conference Paper
2015Robot control as a service - towards cloud-based motion planning and control for industrial robots
Vick, A.; Vonasek, V.; Penicka, R.; Krüger, J.
Conference Paper
2015Schneidkantenpräparation von VHM-Mikrofräsern
Uhlmann, E.; Oberschmidt, D.; Löwenstein, A.; Polte, M.; Winker, I.
Journal Article
2015Shock welding: Process variants and measuring procedures for assessing the welding quality
Ziefle, A.; Uhlmann, E.
Journal Article
2015Simulation of product-service-systems piloting with agent-based models (outlined revision)
Wrasse, K.; Hayka, H.; Stark, R.
Journal Article
2015Situationsangepasste Unterstützung von Dienstleistungsprozessen
Uhlmann, E.; Geisert, C.; Raue, N.; Gabriel, C.
Journal Article
2015Smart Quality verbindet weltweit
Meentken, F.; Rinaldi, F.; Jost, R.
Journal Article
2015Standard semantic models to support the configuration of global production networks
Palmer, C.; Urwin, E.N.; Rodríguez, E.P.; Cid, F.S.; Pinazo-Sánchez, J.M.; Pajkovska-Goceva, S.; Cutting-Decelle, A.-F.; Young, R.
Conference Paper
2015Steigerung der Nutzungspotenziale von CVD-diamantbeschichteten Werkzeugen
Sammler, Fiona
: Uhlmann, Eckart
Dissertation
2015Strahlendetektor zum Detektieren einer Strahlung, Aufnahmevorrichtung und Verfahren zum Abbilden eines Zielvolumens und zum Bestimmen eines Scanzentrums innerhalb des Zielvolumens
Keeve, Erwin; Engel, Sebastian; Fehlhaber, Felix; Uhlmann, Eckart
Patent
2015Strategic intellectual capital management as a driver of organisational innovation
Galeitzke, M.; Steinhöfel, E.; Orth, R.; Kohl, H.
Journal Article
2015Study on additive manufacturing of inner contoured tools
Uhlmann, E.; Bergmann, A.; Gridin, W.
Conference Paper
2015Study on fatigue behavior of dissimilar materials and different methods of friction-welded joints for drive pinion in trucks
Mohammadzadeh Polami, S.; Häfele, P.; Rethmeier, M.; Schmid, A.
Journal Article
2015Success factors and organizational approaches for the implementation of energy management systems according to ISO 50001
Karcher, Phillip; Jochem, Roland
Journal Article
2015Support of innovation networks in manufacturing industries through identification of sustainable collaboration potential and best-practice transfer
Kohl, H.; Orth, R.; Riebartsch, O.; Galeitzke, M.; Cap, J.-P.
Journal Article
2015Surface structuring of tooth flanks
Uhlmann, E.; Bäcker, C.
Journal Article
2015Sustainable corporate development measured by intangible and tangible resources as well as targeted by safeguard subjects
Orth, R.; Scheumann, R.; Galeitzke, M.; Wolf, K.; Kohl, H.; Finkbeiner, M.
Journal Article
2015Target-oriented modularization – Addressing sustainability design goals in product modularization
Halstenberg, F.A.; Buchert, T.; Bonvoisin, J.; Lindow, K.; Stark, R.
Journal Article
2015A transdisciplinary perspective on prototyping
Exner, K.; Lindow, K.; Stark, R.; Ängeslevä, J.; Bähr, B.; Nagy, E.
Conference Paper
2015Two-axis vibration system for targeted influencing of micro-milling
Uhlmann, Eckart; Perfilov, Ivan; Oberschmidt, Dirk
Conference Paper
2015Understanding grain refinement in aluminium welding
Schempp, P.; Rethmeier, M.
Journal Article
2015Untersuchung des Einflusses von Dreh-, Drehfräs-, Glattwalz- sowie Schleifprozessen auf das tribologische Einsatzverhalten von Stahl am Beispiel des Rad-Schiene-Kontakts
Gebhard, Stefan
: Stark, Rainer; Uhlmann, Eckart; Klocke, Fritz
Dissertation
2015Untersuchung von Punktschweißverbindungen mit aktiver Thermografie
Jonietz, Florian; Ziegler, Mathias; Myrach, Philipp; Suwala, Hubert; Rethmeier, Michael
Conference Paper
2015Validation of product-service systems in virtual reality
Exner, K.; Stark, R.
Journal Article
2015Verfahren und Vorrichtung zum Aufnehmen eines zu untersuchenden Objektes
Keeve, Erwin; Käseberg, Marc; Melnik, Steffen; Uhlmann, Eckart; Stopp, Fabian
Patent
2015Verfahren zur mechanischen Erzeugung periodischer nanooptischer Strukturen mit monokristallinen Diamantwerkzeugen am Beispiel von Blazegittern
Haskic, Kurt
: Uhlmann, E.
Dissertation
2015Visuelle Navigation - Systemkonzept für die navigierte Chirurgie
Katanacho, Manuel; Engel, Sebastian; Winne, Christian; Özbek, Christopher; Kosmecki, Bartosz; Keeve, Erwin
Conference Paper
2015Wandlung der Steuerungstechnik durch Industrie 4.0
Chemnitz, M.; Schreck, G.; Krüger, J.
Journal Article
2015Wear of abrasive media and its effect on abrasive flow machining results
Bremerstein, Tina; Potthoff, Annegret; Michaelis, Alexander; Schmiedel, Christian; Uhlmann, Eckart; Blug, Bernhard; Amann, Tobias
Journal Article
2015Welding simulation in car body construction - virtual welding sequence planning for remote laser applications
Thater, Raphael; Wiethop, P.; Rethmeier, Michael
Journal Article
2015Zellfreie Bioproduktion
Oberschmidt, Dirk; Spielvogel, Anja; Herms, Katrin
Report
2014 Verbundprojekt: ADIS
Menevidis, Zaharya; Ajami, Mohamad
Report
2014'To see or not to see?' How do eye movements change within immersive driving environments
Reich, D.; Stark, R.
Conference Paper
2014Abrasives Bürsten. Funktionsflächen flexibel finishen
Uhlmann, E.; Lypovka, P.; Sommerfeld, C.; Bäcker, C.; Dethlefs, A.; Hochschild, L.
Journal Article
2014Adaptive kollaborative Roboter als altersangepasste Begleiter für ein ergonomisches und flexibles Material-Handling
Schmidtler, J.; Surdilovic, D.; Bengler, K.
Conference Paper
2014Advanced machining processes for CFRP
Rieck, I.; Uhlmann, E.
Conference Paper
2014Advanced technologies in life cycle engineering
Stark, R.; Grosser, H.; Beckmann-Dobrev, B.; Kind, S.
Journal Article
2014An approach for the implementation of a global quality management system assuring both robust global processes and local flexibility
Meentken, Felix; Jochem, Roland
Presentation
2014Aus welchen Elementen besteht das Prozessmanagement und wie grenzen sie sich ab?
Knothe, Thomas
Book Article
2014Ausführung von Geschäftsprozessen
Jäkel, Frank-Walter
Book Article
2014Automatic detection of situations for intervention using 3D image reconstruction and template matching
Ajami, Mohamad; Menevidis, Zaharya; Gerson, Christian
Conference Paper
2014Beschreibung und Modellierung
Wintrich, Nikolaus
Book Article
2014Besser mikrofräsen mit gezielten Schwingungen
Uhlmann, E.; Oberschmidt, D.; Mahr, F.; Perfilov, I.
Journal Article
2014Bildgebendes System, Operationsvorrichtung mit dem bildgebenden System und Verfahren zur Bildgebung
Winne, Christian; Engel, Sebastian; Keeve, Erwin; Uhlmann, Eckart
Patent
2014Binderless-cBN as cutting material for ultra-precision machining of stainless steel
Polte, Julian; Polte, Mitchel; Lorenz, David; Oberschmidt, Dirk; Sturm, Heinz; Uhlmann, Eckart
Conference Paper
2014Binderless-cBN for micro machining
Polte, Mitchel; Lorenz, David; Polte, Julian; Uhlmann, Eckart; Oberschmidt, Dirk
Conference Paper
2014CO2 dry cleaning
Sutanto, S.; Dutschk, V.; Mankiewicz, J.; Roosmalen, M. van; Warmoeskerken, M.M.C.G; Witkamp, G.-J.
Journal Article
2014Community-based design of process chains for manufacturing and recycling
Heyer, Steffen
: Seliger, Günther
Dissertation
2014Computation of a rejection threshold used for the Bayes classifier
Blankenburg, M.; Krüger, J.; Bloch, C.
Conference Paper
2014Computertomographie für die Instandhaltung elektronischer Komponenten
Uhlmann, E.; Oberschmidt, D.; Löwenstein, A.; Sawczyn, N.
Conference Paper
2014Controlling zur Einführung und zum Betrieb eines Geschäftsprozessmanagementsystems
Knothe, Thomas; Jaekel, Frank-Walter
Journal Article
2014Cutting edge preparation of micro milling tools
Uhlmann, E.; Oberschmidt, D.; Kuche, Y.; Löwenstein, A.
Journal Article
2014D 4.1: Observatory descriptive report
Menevidis, Zaharya; Hahne, Michael; Ajami, Mohamad; Fairweather, Ben; Smagas, Kostas; Giambene, Giovanni
: Hahne, Michael (Hrsg.); Menevidis, Zaharya (Hrsg.)
Report
2014D2.3 RRI pool of cases & their application
Patel, Menisha; Jirtoka, Marina; Eden, Grace
: Menevidis, Zaharya (Hrsg.); Ajami, Mohamad (Hrsg.)
Report
2014D2.4 Theoretical landscape - White paper
Patel, Menisha; Pearson, John; Giambene, Giovanni; Grabner, Louisa
: Menevidis, Zaharya (Hrsg.); Ajami, Mohamad (Hrsg.)
Report
2014D6.2 policy brief: RRI for security
Menevidis, Zaharya; Briege, Carolin; Mitrou, Lilian
: Nor Mohd, Rohaya (Hrsg.)
Report
2014D6.3 Project Dissemination Dossier Part 1: 1st Period
Menevidis, Zaharya
Report
2014Data Mining in Diagnosemeldungen von ICE-Zügen
Geisert, Claudio
Journal Article
2014Deliverable 2.1: Network of networks
Pearson, John
: Menevidis, Zaharya (Hrsg.)
Report
2014Development of a test method for determining the cracking susceptibility of resistance spot welded high strength steel sheets
Rethmeier, Michael; Suwala, Hubert
Conference Paper
2014Dry and residue-free cutting with high-pressure CO2-blasting
Bilz, M.; Uhlmann, E.
Conference Paper
2014Dry ice blasting as a pre-treatment process for electroplating
Baira, E.M.; Kretzschmar, M.; Hollan, R.; Heitmüller, F.; Uhlmann, E.
Conference Paper
2014Effiziente Erfassung und Pflege von Traceability-Modellen zur Entwicklung technischer Systeme
Figge, Asmus
: Stark, Rainer (Hrsg.)
Dissertation
2014Einordnung und Definition
Knothe, Thomas
Book Article
2014Einrichtung zur Beaufschlagung eines Fluids mit wechselndem Druck
Oberschmidt, Dirk; Uhlmann, Eckart
Patent
2014Enabling product development engineers to select and combine methods for sustainable design
Buchert, T.; Kaluza, A.; Halstenberg, F.A.; Lindow, K.; Hayka, H.; Stark, R.
Conference Paper
2014Enabling sustainable value creation by engineering capacity building
Abd Elall, Sadiq Ahmad Muhammad
: Seliger, Günther
Dissertation
2014Erfolgsfaktoren für die Einführung und den Betrieb eines Energiemanagementsystems nach DIN EN ISO 50001
Deckmann, Andreas; Ferati, Sejdo; Karcher, Phillip; Leu, Stephan; Fourmont, Robert
: Jochem, Roland (Hrsg.)
Study
2014Das etablierte Referenzwerk
Keeve, Erwin
Book Article
2014FAQ - Prozessmanagement
: Jäkel, Frank-Walter; Knothe, Thomas (Hrsg.); Jochem, Roland (Hrsg.)
Scientific Anthology
2014FE-simulation for a safe design of machine tool safety guards
Meister, F.; Uhlmann, E.
Conference Paper
2014Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik. Jahresbericht 2013/2014
 
Annual Report
2014From movements to objects: Creating physical sculptures from Iaido sword motions
Ueno, T.; Brych, A.; Israel, J.H.; Eisenack, G.; Jastram, B.
Conference Paper
2014Futur 1.2014. Industrie 4.0
: Uhlmann, E. (Hrsg.); Pospischil, S. (Red.)
Journal Issue
2014Futur 2.2014. Robotik
: Uhlmann, E. (Hrsg.); Pospischil, S. (Red.)
Journal Issue
2014Generative tool manufacturing for the replication of micro-optical components
Uhlmann, E.; Hein, C.; Bergmann, A.; Oberschmidt, D.
Conference Paper
2014Getriebeeinrichtung
Oberschmidt, Dirk; Uhlmann, Eckart
Patent
2014Global model and observatory for international responsible research and innovation coordination
Menevidis, Zaharya
Presentation
2014Globales Qualitätsmanagement - Herausforderungen und Erfolgspotenziale in der industriellen Praxis
Meentken, Felix; Nowak, Daniel
: Jochem, Roland
Book
2014Grain structure in aluminium TIG welds
Schempp, P.; Pittner, A.; Rethmeier, M.
Journal Article
2014Die Gretchenfrage in der Praxis - Kosten, Nutzen und Wirtschaftlichkeit von QM-Systemen
Jochem, Roland; Raßfeld, Colin; Behmer, Falk; Skowronek, Johannes
Journal Article
2014Handbuch Spanen. 2., vollst. neu bearb. Aufl.
: Spur, Günter (Hrsg.); Heisel, Uwe (Hrsg.); Klocke, Fritz (Hrsg.); Uhlmann, Eckart (Hrsg.)
Scientific Anthology
2014HEPHESTOS: Hard material small-batch industrial machining robot
Schreck, G.; Surdilovic, D.; Krüger, J.
Conference Paper
2014How to consider emotional reactions of the driver within the development of Advanced Driver Assistance Systems (ADAS)?
Auricht, M.; Stark, R.
Journal Article
2014Hybrid laser Arc Welding for The Production of Longitudinally Welded Pipes
Gook, S.; Gumenyuk, A.; Rethmeier, M.
Conference Paper
2014Hybrid laser arc welding of X80 and X120 steel grade
Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2014IC future check: Greater transparency within the credit process
Wuscher, S.; Kohl, H.; Orth, R.
Conference Paper
2014Identification of environmental influences in electronic nose measurement data
Fechteler, M.; Blankenburg, M.; Krüger, J.
Conference Paper
2014Improving Efficiency in Robot Assisted Belt Grinding of High Performance Materials
Uhlmann, E.; Heitmüller, F.
Conference Paper
2014The industrial robot as intelligent tool carrier for human-robot interactive artwork
Vick, A.; Surdilovic, D.; Dräger, A.K.; Krüger, J.
Conference Paper
2014The industrial robot as intelligent tool carrier for human-robot interactive artwork
Vick, A.; Surdilovic, D.; Dräger, A.K.; Krüger, J.
Conference Paper