Reinlein, ClaudiaClaudiaReinleinAppelfelder, MichaelMichaelAppelfelderGebhardt, SylviaSylviaGebhardtBeckert, ErikErikBeckertEberhardt, RamonaRamonaEberhardtTünnermann, AndreasAndreasTünnermann2022-03-042022-03-042013https://publica.fraunhofer.de/handle/publica/23193810.1117/1.JMM.12.1.013016This paper reports on the thermomechanical modeling and characterization of a micro-opto-electro-mechanical systems deformable mirror (DM). This unimorph DM offers a low-temperature cofired ceramic substrate with screen-printed piezoceramic actuators on its rear surface and a machined copper layer on its front surface. We present the DM setup, thermomechanical modeling, and hybrid fabrication. The setup of the DM is transferred into a thermomechanical model in ANSYS Multiphysics. The thermomechanical modeling of the DM evaluates and optimizes the mount material and the copper-layer thickness for the loading cases: homogeneous thermal loading and laser-loading of the mirror. Subsequently, the developed and theoretically optimized DM setup is experimentally validated. The homogeneous loading of the optimized design results in a membrane deformation with a rate of -0.2 µm K-1, whereas the laser loading causes an opposed change with a rate of -0.2 µm W-1. Therefore, the proposed mirror design is suitable to precompensate laser-generated mirror deformations by homogeneous thermal loading (heating). We experimentally show that a 35-K preheating of the mirror assembly compensates for an absorbed laser power of 1.25 W. Therefore, the novel compensation regime "compound loading" for the suppression of laser-induced deformations is developed and proven.endeformable mirrorunimorphlaser-induced deformationthermally-induced deformationhomogeneous loadingcompound loading620620666journal article