Garcia Trelles, E.E.Garcia TrellesSchweizer, C.C.SchweizerEckmann, S.S.Eckmann2022-05-302022-05-302018https://publica.fraunhofer.de/handle/publica/40382810.1051/matecconf/201816519006In this investigation, the fatigue behaviour of a ductile cast iron with high content of silicon and molybdenum, was experimentally characterized by performing isothermal low cycle fatigue (LCF) tests as well as out-of-phase thermomechanical fatigue (OPTMF) tests within the temperature range RT - 500 °C. The studied material shows an embrittlement at temperatures nearby 400 °C. A possible explanation for the observed lifetime reduction is intergranular embrittlement (IE). A mechanism based lifetime model is proposed for assessing the lifetime. The model is based on the assumption that the crack advance per cycle is correlated with the cyclic crack tip opening displacement (DCTOD) attributed to the crack tip blunting caused by accumulation of plastic and creep deformations ahead of the crack tip. Intergranular embrittlement is accounted for by introducing a temperature and strain rate dependent prefactor in the crack growth law, which only acts in a certain temperature range. The model is calibrated for a GJS material and successfully applied to predict the lifetime of this material when undergoing isothermal and non-isothermal mechanical loadings. A probabilistic interpretation of the scatter of the investigated material is presented in conjunction with the random nature of the initial defect size distribution.enLCFOPTMFcyclic material behaviorintergranular embrittlement (IE)620conference paper