Now showing 1 - 10 of 21
  • Publication
    An integrated framework for design, management and operation of reconfigurable assembly systems
    ( 2018)
    Manzini, M.
    ;
    Unglert, J.
    ;
    Gyulai, D.
    ;
    Colledani, M.
    ;
    Jauregui-Becker, J.M.
    ;
    Monostori, L.
    ;
    Urgo, M.
    Manufacturing has to cope with the continuously increasing variety of products, change of volumes and shortening product life cycles. These trends also affect the automotive sector: the frequent introduction of new models, materials and assembly technologies put the suppliers of make-to-order parts under pressure. In this context, the design of assembly systems and their management are of paramount importance for the companies' competitiveness. In this paper, we propose an approach for the design and reconfiguration of modular assembly systems through the integration of different computational tools addressing the design of the system, the optimization of the layout, the planning of reconfiguration actions as well as production planning. Integrating these computational tools and iterating through the resulting workflow and feedback allow to consider the outcomes and dependencies of alternative decision sequences holistically with the objective of an effective and efficient approach to production system design and management. The viability of the approach is demonstrated through the application to an automotive case study.
  • Publication
    Capacity management of modular assembly systems
    ( 2017)
    Gyulai, D.
    ;
    Monostori, L.
    Companies handling large product portfolio often face challenges that stem from market dynamics. Therefore, in production management, efficient planning approaches are required that are able to cope with the variability of the order stream to maintain the desired rate of production. Modular assembly systems offer a flexible approach to react to these changes, however, there is no all-encompassing methodology yet to support long and medium term capacity management of these systems. The paper introduces a novel method for the management of product variety in assembly systems, by applying a new conceptual framework that supports the periodic revision of the capacity allocation and determines the proper system configuration. The framework has a hierarchical structure to support the capacity and production planning of the modular assembly systems both on the long and medium term horizons. On the higher level, a system configuration problem is solved to assign the product families to dedicated, flexible or reconfigurable resources, considering the uncertainty of the demand volumes. The lower level in the hierarchy ensures the cost optimal production planning of the system by optimizing the lot sizes as well as the required number of resources. The efficiency of the proposed methodology is demonstrated through the results of an industrial case study from the automotive sector.
  • Publication
    Cyber-physical manufacturing in the light of Professor Kanji Ueda's Legacy
    ( 2017)
    Vancza, J.
    ;
    Monostori, L.
    Cyber-physical manufacturing, i.e., the formerly never seen integration of the physical and virtual worlds in the manufacturing domain is considered the substance of the 4th industrial revolution. Much of the changes deemed now revolutionary are originated in a long and converging progress of manufacturing science and technology, as well as of computer science, information and communication technologies. One of the pioneers and influential thinkers of production engineering who paved the way towards cyber-physical manufacturing was unquestionably Professor Kanji Ueda (1946-2015). With this paper the authors would like to pay a tribute to his achievements, by highlighting his main contributions not only to the advancement of production engineering and industrial technology but also to the sustainability of our society.
  • Publication
    Robust production planning and control for multi-stage systems with flexible final assembly lines
    ( 2017)
    Gyulai, D.
    ;
    Pfeiffer, A.
    ;
    Monostori, L.
    Production planning of final assembly systems is a challenging task, as the often fluctuating order volumes require flexible solutions. Besides, the calculated plans need to be robust against the process-level disturbances and stochastic nature of some parameters like manual processing times or machine availability. In the paper, a simulation-based optimisation method is proposed that utilises lower level shop floor data to calculate robust production plans for final assembly lines of a flexible, multi-stage production system. In order to minimise the idle times when executing the plans, the capacity control that specifies the proper operatorâtask assignments is also determined. The analysed multi-stage system is operated with a pull strategy, which means that the production at the final assembly lines generates demands for the preceding stages providing the assembled components.
  • Publication
    Decision support solutions for factory and network logistics operations
    ( 2017)
    Ilie-Zudor, E.
    ;
    Kemény, Z.
    ;
    Pfeiffer, A.
    ;
    Monostori, L.
    The paper examines the relationship of decision levels, performance measures and modelling and decision support approaches through the example of two implemented decision support systems for manufacturing and logistics application fields. Aside from highlighting the relevance of decision support for making industrial networks fit for emerging challenges, the relevance of the two presented EU FP7 projects VFF and ADVANCE to the Factories of the Future vision is shown. A discussion of the two projects outlines future research, with particular focus on challenges that arise from integration across levels of the decision hierarchy, within an organisationally heterogeneous network.
  • Publication
    Artificial neural network based tool condition monitoring in micro mechanical peck drilling using thrust force signals
    ( 2017)
    Patra, K.
    ;
    Jha, A.K.
    ;
    Szalay, T.
    ;
    Ranjan, J.
    ;
    Monostori, L.
    Micro scale machining process monitoring is one of the key issues in highly precision manufacturing. Monitoring of machining operation not only reduces the need of expert operators but also reduces the chances of unexpected tool breakage which may damage the work piece. In the present study, the tool wear of the micro drill and thrust force have been studied during the peck drilling operation of AISI P20 tool steel workpiece. Variations of tool wear with drilled hole number at different cutting conditions were investigated. Similarly, the variations of thrust force during different steps of peck drilling were investigated with the increasing number of holes at different feed and cutting speed values. Artificial neural network (ANN) model was developed to fuse thrust force, cutting speed, spindle speed and feed parameters to predict the drilled hole number. It has been shown that the error of hole number prediction using a neural network model is less than that using a r egression model. The prediction of drilled hole number for new test data using ANN model is also in good agreement to experimentally obtained drilled hole number.
  • Publication
    Scheduling and Operator Control in Reconfigurable Assembly Systems
    ( 2017)
    Gyulai, D.
    ;
    Kádár, B.
    ;
    Monostori, L.
    Pushed by the recent market trends, companies need to adapt to changeable demands, regarding both mix and volume, in order to keep their competitiveness. Modular and reconfigurable assembly systems offer an efficient solution to these changes, providing economies of scale and also economies of scope. In the previous works of the authors, novel methods were presented to solve strategic level system configuration, and tactical mid-term production planning problems related to modular, reconfigurable assembly systems. The paper relies on these results, and aims at extending the previously proposed planning hierarchy on the short-term, daily production scheduling. The objective is to minimize the total operator headcount, considering the production lot sizes calculated on a higher, planning level on a working shift basis. The analyzed scheduling problem requires novel models, as important constraints in the scheduling problem are the reconfigurations consuming time as well a s resources. In the paper, constraint programming and metaheuristics models are formulated and compared, resulting in production schedules that specify the production sequences, and the operator allocations. Conclusively, the operator controls can be also obtained from the results, specifying a work plan and tasks for a given operator within a working shift. The proposed methods are compared by using real industrial problem instances.
  • Publication
    Design and management of reconfigurable assembly lines in the automotive industry
    ( 2016)
    Colledani, M.
    ;
    Gyulai, D.
    ;
    Monostori, L.
    ;
    Urgo, M.
    ;
    Unglert, J.
    ;
    Houten, F. van
    Automotive suppliers are facing the challenge of continuously adapting their production targets to variable demand requirements due to the frequent introduction of new model variants, materials and assembly technologies. In this context, the profitable management of the product, process and system co-evolution is of paramount importance for the company competitiveness. In this paper, a methodology for the design and reconfiguration management of modular assembly systems is proposed. It addresses the selection of the technological modules, their integration in the assembly cell, and the reconfiguration policies to handle volume and lot size variability. The results are demonstrated in a real automotive case study.
  • Publication
    An approach to determine simulation model complexity
    ( 2016)
    Popovics, G.
    ;
    Monostori, L.
    Discrete event simulation (DES) is an essential tool for planning, operating and evaluating manufacturing systems. Estimation of simulation model complexity provides several advantages in the planning phase of a simulation project. For this purpose some measures of the simulation model's complexity are indispensable. The paper presents an approach to determine the complexity of DES models by combining several parameters describing simulation models. The potentials of the proposed approach are examined via industrial cases.
  • Publication
    Generic data structure and validation methodology for simulation of manufacturing systems
    ( 2016)
    Popovics, G.
    ;
    Pfeiffer, A.
    ;
    Monostori, L.
    In recent years, the analysis and evaluation of manufacturing systemsâ behaviour and their performance became essential. Discrete event simulation (DES) as a digital enterprise technology is an effective tool both in production related decision support processes and in structure or performance analysis of manufacturing systems. Building a DES model of a manufacturing system is a difficult task and requires special competence. Reducing the efforts spent on draft simulation is the aim of an ongoing research which is presented in the paper. The developed framework simplifies and accelerates the process of model building. A production oriented implementation of the ANSI/ISA-95 standard was used by the proposed modelling methodology to define a generic data structure supporting the creation of models without specific knowledge related to the simulation software applied. The data structure enables the development and application of proprietary simulation engines tailored for specific problems.