Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik IPK

Filters

4
1
4
4
Reset filters

Settings
Now showing 1 - 4 of 4
  • Publication
    High-power laser beam welding for thick section steels - new perspectives using electromagnetic systems
    ( 2022)
    Rethmeier, M.
    ;
    Gumenyuk, A.
    ;
    Bachmann, M.
    In recent years, it was shown that the introduction of additional oscillating and permanent magnetic fields to laser beam and laser-arc hybrid welding can bring several beneficial effects. Examples are a contactless weld pool support for metals of high thickness suffering from severe drop-out when being welded conventionally or an enhanced stirring to improve the mixing of added filler material in the depth of the weld pool to guarantee homogeneous resulting mechanical properties of the weld. The latest research results show the applicability to various metal types over a wide range of thicknesses and welding conditions. The observations made were demonstrated in numerous experimental studies and a deep understanding of the interaction of the underlying physical mechanisms was extracted from numerical calculations.
  • Publication
    Shielded metal arc welding of 9%Ni steel using matching ferritic filler metal
    ( 2021)
    El-Batahgy, A.
    ;
    Saiyah, A.
    ;
    Khafagi, S.
    ;
    Gumenyuk, A.
    ;
    Gook, S.
    ;
    Rethmeier, M.
    Motivated by the tensile strength loss of 9%Ni steel arc welded joints made using Ni-based austenitic filler metals, the feasibility of maintaining the tensile strength using matching ferritic filler metal has been demonstrated. In comparison with shielded metal arc welded joint made using Ni-based austenitic electrode ENiCrMo-6, higher tensile strength comparable to that of the base metal was obtained using matching ferritic electrode. Besides, sufficient impact toughness energies with much lower mismatch were obtained for weld metal and heat-affected zone. Welded joint with a lower mechanical mismatching is of considerable importance for achieving acceptable combination of tensile strength and impact toughness. A better combination of these mechanical properties is ensured by applying a post weld heat treatment.
  • Publication
    Avoidance of liquid metal embrittlement during resistance spot welding by heat input dependent hold time adaption
    ( 2020)
    Böhne, C.
    ;
    Meschut, G.
    ;
    Biegler, M.
    ;
    Rethmeier, M.
    Liquid metal embrittlement (LME) cracking can occur during resistance spot welding (RSW) in zinc-coated advanced high-strength steels (AHSS) for automotive production. In this study, a methodological variation of hold time is performed to investigate the process-related crack influence factors. A combination of numerical and experimental investigations confirms, that the extent of heat dissipation and re-heating of the sheet surface can be influenced and thus the degree of crack formation can be controlled in a targeted manner by the parameterisation of the hold time. The temperature and stress history of crack-free and crack-afflicted spot welds are analysed and a conclusion on the borders defining the LME active region is derived.
  • Publication
    Geometric distortion-compensation via transient numerical simulation for directed energy deposition additive manufacturing
    ( 2020)
    Biegler, Max
    ;
    Elsner, B.A.M.
    ;
    Graf, B.
    ;
    Rethmeier, Michael
    Components distort during directed energy deposition (DED) additive manufacturing (AM) due to the repeated localised heating. Changing the geometry in such a way that distortion causes it to assume the desired shape - a technique called distortion-compensation - is a promising method to reach geometrically accurate parts. Transient numerical simulation can be used to generate the compensated geometries and severely reduce the amount of necessary experimental trials. This publication demonstrates the simulation-based generation of a distortion-compensated DED build for an industrial-scale component. A transient thermo-mechanical approach is extended for large parts and the accuracy is demonstrated against 3d-scans. The calculated distortions are inverted to derive the compensated geometry and the distortions after a single compensation iteration are reduced by over 65%.