Now showing 1 - 10 of 15
  • Publication
    Modellieren von Verbindungselementen
    ( 1995)
    Krause, F.-L.
    ;
    Tittel, F.
    In modern CAD systems it is necessary to simulate connections of components in several steps. Connecting elements, such as screws, rivets and the like, must be simulated as indivi- dual parts, while modifications have to be made on the geometry of the parts to be connected, such as the carrying out of bores. Only then such parts will be combined to form an assembly group. This article introduces a method that permits connections to be handled as an element within a feature-based modeling system.
  • Publication
    Development and design with knowledge-based software tools - an overview
    ( 1995)
    Krause, F.-L.
    ;
    Schlingheider, J.
    Knowledge-based systems make possible an increased utility potential for software in the area of design and process planning, taking account of constantly increasing production complexity. This article offers an overview of application areas for knowledge-based systems in development and design. Activities are identified that can be supported consistent with the present state-of-the-art, in conclusion, a categorization of industrial applications and research activities in this area is undertaken.
  • Publication
    Produktorientierte Normung von STEP
    ( 1994)
    Krause, F.-L.
    ;
    Ciesla, M.
    ;
    Stephan, M.
    The development of innovative products within the shortest possible time, and of a high quality at low cost, is a challenge which asks for advanced forms of computer assistance. A central task proposed in this connection is the creation of integrated product models mapping all the information that covers the whole life cycle of the product. The standard ISO 10303 forms a worldwide basis for implementing such integrated product models
  • Publication
    Features als semantische Objekte. Tl.2
    ( 1994)
    Krause, F.-L.
    ;
    Ciesla, M.
    ;
    Rieger, E.
    ;
    Stephan, M.
    ;
    Ulbrich, A.
    Zur Integration der im Produktentwicklungsprozeß zu bewältigenden Aufgaben ist es erforderlich, neben der geometrischen Bauteilgestalt nichtgeometrische Informationen vom Produktentwurf bis zur Fertigung und Prüfung zu berücksichtigen. Die Einführung von Objekten als Träger semantischer Information führt zur Verwendung von Features. Dazu wurde im ersten Teil dieses Beitrages ein Konzept und dessen Realisierung beschrieben, das die flexible Definition und rechnerinterne Abbildung sowie die Interpretation von Features als semantikbehaftete Objekte ermöglicht. Außerdem wurden Anwendungsmodule für die Teilaufgaben Entwurf, Konstruktion und Ermittlung technologischer Prozeßfolgen beschrieben. Auf der Grundlage der behandelten Basisfunktionalitäten zur Featureverarbeitung wird in diesem Beitrag auf Anwendungsmodule zur featurebasierten Unterstützung der Vorrichtungs-, NC- und Meßplanung eingegangen.
  • Publication
    Industrielle Informationstechnik
    ( 1994)
    Krause, F.-L.
    Mit dem Begriff Industrielle Informationstechnik verbindet sich die Nutzung einer fabrikorientierten Informatik für Probleme industrieller Produktionsprozesse unter dem Blickwinkel des Ingenieurs. Im sehr weit gefaßten Rahmen dieser Disziplin ist das Spektrum der einzelnen Bereichsaktivitäten angesiedelt, deren Schwerpunkte in der Konstruktionsinformatik und der Produktionsinformatik liegen. Typische Beispiele werden im folgenden genannt.
  • Publication
    Konstruktionstechnik
    ( 1994)
    Krause, F.-L.
    Unter Konstruktionstechnik wird heute die Rechnerunterstützung des Fabrikbereichs verstanden, in dem alle Aspekte des Produktlebenszyklus, zukünftig verstärkt auch im Sinne von Simultaneous Engineering, bearbeitet und zur Produktentwicklung herangezogen werden. Hierbei kommt es insbesondere darauf an, Produktentwicklungsprozesse zu gestalten. Die durchgeführten Aufgaben liegen in den Schwerpunkten Konstruktionssystematik, Systemergonomie, Geometrieverarbeitung und Arbeitsplanung. Eine exemplarische Auswahl wird im folgenden gegeben.
  • Publication
    Neue Methoden der automatischen Zeichnungsinterpretation. Einsatzmöglichkeiten der Grauwertverarbeitung.
    ( 1993)
    Krause, F.-L.
    ;
    Jansen, H.
    ;
    Luth, N.
    Methods used so far an automatic registration of large-sized technical documents are based on the binarization of pixel data by means of a fixed or dynamic scanning threshold. However, the quality of the results obtained thereby depends to a considerable degree on the quality of the scanning patterns. Much better results can be obtained by means of processing the grey scale values even with a relatively slight resolution.
  • Publication
    Strukturorientiertes Konstruieren.
    ( 1993)
    Krause, F.-L.
    ;
    Rieger, E.
    ;
    Tittel, F.
    Structure oriented design opens up new perspectives for product development. It includes the integrated treatment of elements of the product structure, features and geometry. This results in the possibility of designing products independently from the geometry. Furthermore the use of feature semantics is optimized. This article describes a system for structure oriented product design based on a feature modelling system.
  • Publication
    Planung der Laserstrahlbearbeitung unter Nutzung neuartiger informationstechnischer Strategien -PLanS-.
    ( 1993)
    Krause, F.-L.
    ;
    Leemhuis, H.
    This paper presents a system for the representation, processing and provision of technological knowledge for laser beam processing that makes it possible, in addition to tabular test records and physico-mathematical models, to take advantage of company specific experiences. Due to the complexity of the laser beam working process and the dificulty in selecting the optimum setting parameters the engineering competence of the operations scheduling personnel and machine attendants is of particular importance. The acquisition and preparation of technological knowledge is a substantial factor for the conservation of company know-how.
  • Publication
    Product modeling
    ( 1993)
    Krause, F.-L.
    ;
    Kimura, F.
    ;
    Kjellberg, T.
    ;
    Lu, S.C.-Y.
    ;
    Tipnis, V.A.
    ;
    Alting, L.
    ;
    ElMaraghy, H.A.
    ;
    Eversheim, W.
    ;
    Weck, M.
    ;
    Iwata, K.
    ;
    Suh, N.P.
    ;
    Wolf, A.C.H. van der
    One of the most challenging tasks in the engineering profession is to develop new products, that have the shortest lead-time, highest quality and lowest costs with optimal life-cycle consideration. The issue of product modeling is at the center of various new product development paradigms designed to meet this challenge, and, therefore, has received major attentions from application and research communities. Due to the fast developments of computer and information technologies and the increasing demands of competitiveness and productivity, the scopes and approaches of product modeling have evolved rapidly in recent years. This paper presents an overview of the state-of-the-art and practice of product modeling in terms of product models and process chains, and suggests some important issues for further investigation.