Now showing 1 - 5 of 5
  • Publication
    Ecological and functional optimization of the pretreatment process for plasma based coatings of cutting tools
    ( 2019)
    Uhlmann, E.
    ;
    Riemer, H.
    ;
    An, S.
    ;
    Fröhlich, M.
    ;
    Paschke, H.
    ;
    Petersen, M.
    Increasing demands in machining of high-tech materials and dry machining lead to higher thermal and mechanical loads on cutting tools. In response to these challenges, enhanced coating solutions are applied to increase performance and life of cutting tools. However, during the production process the cemented carbide substrates are contaminated with grinding oils and residues of organic material. For the subsequent physical vapor deposition (PVD) coating process an intensive and high-quality cleaning process is necessary. In this contribution, plasma electrolytic polishing (PEP) is used as a novel alternative to conventional ecologically harmful cleaning baths. Apart from the ecological advantage, the surface of the substrate can be optimized with regard to the coating adhesion. To examine the performance of the different cleaning processes, machining tests were performed at the IWF to evaluate the layer adhesion and tool life of the tools.
  • Publication
    CVD-Diamantwerkzeuge mit SiC-Zwischenschicht
    ( 2019)
    Uhlmann, E.
    ;
    Barth, E.
    ;
    Gäbler, J.
    ;
    Höfer, M.
    Der Cobalt-(Co)-Anteil in Hartmetallen diffundiert während des Diamantbeschichtungsprozesses in die Diamantschicht und mindert deren Haftfähigkeit. Siliciumcarbid-(SiC)-Zwischenschichten können als Diffusionsbarriere für Cobalt dienen und die konventionelle Ätzvorbehandlung der Substrate ersetzen. Im Rahmen einer Forschungsarbeit werden Beschichtungsprozesse mit SiC-Zwischenschicht entwickelt, diese Schichtsysteme auf verschiedene Substrate aufgebracht und durch Zerspanungsuntersuchungen bewertet.
  • Publication
    Dreh- und Fräswerkzeuge mit cBN-Beschichtungen
    ( 2006)
    Uhlmann, E.
    ;
    Wiemann, E.
    ;
    Keunecke, M.
    ;
    Richter, V.
    Der Anteil der superharten Schneidstoffe nimmt aufgrund der gestiegenen Anforderungen in der Fertigung überproportional zu. In einem gemeinschaftlichen Forschungsprojekt wurde die Leistungsfähigkeit von cBN-Schichtsystemen, die als Deckschichten auf TiN- und TiAlN- Beschichtungen abgeschieden waren, beim Hartdrehen und -fräsen untersucht. Hierzu wurden gehärtete Stähle mit verschiedenen Substraten und Substratvorbehandlungen bearbeitet. Abschließende Kavitationstests und FEM (Finite Elemente Methode)-Simulationen des Zerspanvorgangs ergänzen die Analyse.
  • Publication
    CBN coatings on cutting tools
    ( 2004)
    Uhlmann, E.
    ;
    Bräuer, G.
    ;
    Wiemann, E.
    ;
    Keunecke, M.
    Hard cutting materials are a prerequisite for the machining of hard workpiece materials. Superhard cubic boron nittride (cBN) is the hardest known material eligible for the machining of ferrous materials. The developement of a cBN coating for cutting tools, combining the advantages of coating and of cBN, is of great importance for many branches of industry. Based on the first success of deposting adherent cBN films on cemented carbide substrates with a thickness of up to 0,8 pm at temperature for below 1000 °C, indexable inserts were coated with a B C film as target and a cBN facing. These coatings show excellent mechanical and physical properties. Cutting experiments with cBN coated cemented carbide tools were carried out and the tool life, cutting forces and workpiece surface roughness were measured. The results are presented for the machining of serval workpiece materials.
  • Publication