Now showing 1 - 5 of 5
  • Publication
    Feindrehen von Gußeisen mit hohen Schnittgeschwindigkeiten
    ( 1995)
    Spur, G.
    ;
    Becker, K.
    ;
    Lachmund, U.
    In the past years, rising requirements on productivity and quality have lad to high cutting speed. Especially superhard non-metallic cutting materials brought progress in this field. This study deals with high speed finishing of lamellar gray cast iron with ceramic cutting materials and cubic boron nitride. The results show that the application of high cutting speeds loads to a considerable reduction of processing times. Regarding the tool life the application of cubic boron nitrid, especially with cutting speedover Vc =1000m/min, yielded the best results. High surface qualities can be reached up to a cutting speed level of Vc=2000m/min.
  • Publication
    Möglichkeiten und Grenzen des Hochleistungsbandschleifens
    ( 1993)
    Spur, G.
    ;
    Becker, K.
    Das Hochleistungsbandschleifen ist konventionellen Fertigungsverfahren heute ebenbürtig. Mit einer Zerspanungsleistung, die der des Fräsens oder Drehens entspricht, kann sehr genau in bezug auf Maß und Form gearbeitet und eine hohe Oberflächenqualität erzielt werden. Um das Potential des Bandschleifens voll ausschöpfen zu können, müssen die Zusammenhänge zwischen den Prozeßgrößen bekannt sein.
  • Publication
    Einfluß der Schleifbandspezifikation beim Bandschleifen mit Stützplatte
    ( 1993)
    Spur, G.
    ;
    Becker, K.
    ;
    Stark, C.
    ;
    Schäfer, H.
    The paper presents the results of the investigations carried out by the Institut für Werkzeugmaschinen und Fertigungstechnik (IWF) of the Technical University of Berlin on the subject of the influence of the abrasive belt specification during belt grinding with bolster plate. The objective of this investigation was to analyze the influence of the grain type, grain size and of the grinding belt system (conventional single layered, compact grain and hollow sphere abrasive multi-layered) on tool wear, the work result and the grinding forces.
  • Publication
    Bandschleifen mit Stützplatte von Grauguß
    ( 1992)
    Spur, G.
    ;
    Becker, K.
  • Publication
    Bandschleifen mit Stützplatte und Kornhohlkugel-Schleifband
    ( 1989)
    Spur, G.
    ;
    Byrne, G.
    ;
    Stark, C.
    ;
    Becker, K.
    ;
    Schäfer, H.