Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik IPK

Filters
Reset filters

Settings
Now showing 1 - 10 of 2643
No Thumbnail Available
Publication

Hybrid laser-arc welding of laser- and plasma-cut 20-mm-thick structural steels

2022 , Üstündag, Ömer , Bakir, Nasim , Gook, Sergej , Gumenyuk, Andrey , Rethmeier, Michael

It is already known that the laser beam welding (LBW) or hybrid laser-arc welding (HLAW) processes are sensitive to manufacturing tolerances such as gaps and misalignment of the edges, especially at welding of thick-walled steels due to its narrow beam diameter. Therefore, the joining parts preferably have to be milled. The study deals with the influence of the edge quality, the gap and the misalignment of edges on the weld seam quality of hybrid laser-arc welded 20-mm-thick structural steel plates which were prepared by laser and plasma cutting. Single-pass welds were conducted in butt joint configuration. An AC magnet was used as a contactless backing. It was positioned under the workpiece during the welding process to prevent sagging. The profile of the edges and the gap between the workpieces were measured before welding by a profile scanner or a digital camera, respectively. With a laser beam power of just 13.7 kW, the single-pass welds could be performed. A gap bridgeability up to 1 mm at laser-cut and 2 mm at plasma-cut samples could be reached respectively. Furthermore, a misalignment of the edges up to 2 mm could be welded in a single pass. The new findings may eliminate the need for cost and time-consuming preparation of the edges.

View
No Thumbnail Available
Publication

Methodology for a reverse engineering process chain with focus on customized segmentation and iterative closest point algorithms

2022 , Mönchinger, Stephan , Schröder, Robert , Stark, Rainer

One-off construction is characterized by a multiplicity of manual manufacturing processes whereby it is based on consistent use of digital models. Since the actual state of construction does not match the digital models without manually updating them, the authors propose a method to automatically detect deviations and reposition the model data according to reality. The first essential method is based on the ""Segmentation of Unorganized Points and Recognition of Simple Algebraic Surfaces"" presented by Vanco et al.. The second method is the customization of the iterative closest point (ICP) algorithm. The authors present the overall structure of the implemented software, based on open source and relate it to the general reverse engineering (RE) framework by Buonamici et al.. A highlight will be given on: the general architecture of the software prototype; a customized segmentation and clustering of unorganized points and recognition of simple algebraic surfaces; the deviation analysis with a customized iterative closest point (CICP) algorithm Especially in the field of one-off construction, characterized by small and medium companies, automated assessment of 3D scan data during the design process is still in its infancy. By using an open source environment progress for consistent use of digital models could be accelerated.

View
No Thumbnail Available
Publication

PowerGrasp: Development Aspects for Arm Support Systems

2022 , Goppold, J.-P. , Kuschan, J. , Schmidt, H. , Krüger, J.

Exoskeletons can support workers on physically demanding tasks, but in industry they lack of acceptance. This contribution gives an insight into design aspects for upper body exoskeletons, especially how active exoskeletons for industrial applications differ from military and medical use-cases. To overcome typical rigid exoskeleton problems, we suggest the use of modular soft-exosuit support systems and therefore checked different types of soft actuation principles for their eligibility for the use on upper body joints. Most promising approach is using two-layered actuators sting of robust fabric with embedded rubber tubes as pressure chambers. By inflating the tubes, it is possible to vary the stiffness of the chambers, which can be effectively used to generate assisting forces and moments at human joints (shoulder, elbow, wrist, finger).

View
No Thumbnail Available
Publication

Wolframschmelzcarbidbasierte MMC-Schichten für den industriellen Einsatz im Formenbau

2022 , Langebeck, Anika , Jahnke, Christian , Wünderlich, Tim , Hein, Christoph , Bohlen, Annika , Uhlmann, Eckart

Zur Steigerung der abrasiven Verschleißbeständigkeit können Oberflächen lokal mit Hartpartikeln verstärkt werden. Diese sogenannten Metal-Matrix-Composit(MMC)-Schichten können mittels Laserstrahldispergieren gefertigt und durch Mikrofräsen nachbearbeitet werden. Im hier vorgestellten Forschungsvorhaben wurde als Grundwerkstoff verwendete Aluminiumbronze (CuAl10Ni5Fe4) mit Wolframschmelzcarbid verstärkt. Der Hartpartikelgehalt kann dabei durch eine Steigerung des Pulvermassenstroms bis zur Packungsdichte des unverarbeiteten Pulvers erhöht werden. Über eine temperaturbasierte Leistungsregelung kann eine gleichbleibend homogene MMC-Schicht mit konstanter Dicke und Tiefe dispergiert werden. Durch das Mikrofräsen mit optimierten Parametern können qualitativ hochwertige MMC-Oberflächen für den industriellen Einsatz in Spritzgusswerkzeugen hergestellt werden. Dabei wurde vor allem der Zahnvorschub fz als kritischer Prozessparameter identifiziert.

View
No Thumbnail Available
Publication

Untersuchungen zur Beeinflussung der Geometrie und Werkstoffeigenschaften laserimplantierter Werkzeugstahloberflächen sowie zum tribologischen Einsatzverhalten

2022 , Spranger, Felix

In einer Vielzahl technischer Anwendungen spielt die Schaffung und Aufrechterhaltung eines definierten tribologischen Verhaltens zwischen in Kontakt tretenden Wirkflächen für die Funktionalität von Bauteilen oder Werkzeugen eine entscheidende Rolle. Verfahren der Oberflächentechnik verfolgen das Ziel, entweder durch eine Manipulation der Werkstoffeigenschaften oder durch eine Strukturierung der Wirkfächen diese anzupassen. Obwohl erhabene Mikrostrukturen großes Potenzial zur gezielten Manipulation zeigen, wurden diese bislang wenig betrachtet, da sie anfällig für Verschleiß sind und nur schwer hergestellt werden können. Mit der Laserimplantation ist ein Verfahren bekannt, welches diese Hemmnisse überwindet und eine Generierung verschleißbeständiger, erhabener Mikrostrukturen (Implants) durch ein gepulstes Laserdispergieren keramischer Hartstoffpartikel in Wirkflächen zulässt. Um eine breite Nutzbarkeit zu erreichen, wird in dieser Arbeit eine Erweiterung des Prozessverständnisses forciert, sodass die geometrischen als auch werkstofftechnischen Implanteigenschaften zielgerichtet manipulierbar werden. Des Weiteren wird die tribologische Wirkweise implantierter Oberflächen betrachtet.

View
No Thumbnail Available
Publication

Study on the transition behavior of the bulging effect during deep penetration laser beam welding

2022 , Artinov, A. , Meng, X. , Bachmann, M. , Rethmeier, M.

The present work is devoted to the study of the transition behavior of the recently confirmed widening of the weld pool, known as the bulging effect, during high-power deep penetration laser beam welding of thick unalloyed steel sheets. A three-dimensional transient multi-physics numerical model is developed, allowing for the prediction of the bulge formation and the study of its temporal behavior. The model is generalized to account automatically for the transition from partial to complete penetration. Several experimental measurements and observations, such as drilling period, weld pool length, temperature, efficiency, and metallographic cross-sections are used to verify the model and assure the plausibility of the numerical results. The analysis of the calculated temperature and velocity distributions, as well as the evolution of the keyhole geometry, show that the formation of a bulging region strongly depends on the penetration depth of the weld. Based on the numerical results, the bulge is found to occur transiently, having its transition from a slight bulge to a fully developed bulging between penetration depths of 6 mm and 9 mm, respectively.

View
No Thumbnail Available
Publication

Literature review of quality attributes for collaborative product development

2022 , Randermann, M. , Blüher, T. , Jochem, R. , Stark, R.

In collaborative product development, diverse stakeholders are involved in distributed engineering activities. This situation makes it difficult to ensure, manage, and improve the quality across company boundaries. Therefore, this work determines the characteristics of collaborative engineering which have an influence on the quality of distributed product development. Several interoperability frameworks were analyzed in order to get insights into key areas for collaboration design. Furthermore, a systematic literature review provided the best practices for improvement efforts. The derived quality attributes were condensed and adapted to collaborative product development in the four key areas of organization and processes, data/artifacts, information technology systems and infrastructure, and social factors. This enables product developers to examine their collaborative engineering environment and to identify room for improvement and to enhance quality. A case example of an engineering change order shows a collaborative data flow process, in which the quality attributes may indicate improvement measures.

View
No Thumbnail Available
Publication

Multiple-Wire Submerged Arc Welding of High-Strength Fine-Grained Steels

2022 , Gook, S. , El-Sari, Bassel , Biegler, Max , Rethmeier, Michael , Lichtenthäler, F. , Stark, M.

Ensuring the required mechanical-technological properties of welds is a critical issue in the application of multi-wire submerged arc welding process for welding high-strength fine-grained steels. Excessive heat input is one of the main causes for microstructural zones with deteriorated mechanical properties of the welded joint, such as a reduced notched impact strength and a lower structural robustness. A process variant is proposed which reduces the weld volume as well as the heat input by adjusting the welding wire configuration as well as the energetic parameters of the arcs, while retaining the advantages of multi-wire submerged arc welding such as high process stability and production speed.

View
No Thumbnail Available
Publication

Characterization of Ti-6Al-4V Fabricated by Multilayer Laser Powder-Based Directed Energy Deposition

2022 , Ávila Calderón, Luis Alexander , Graf, Benjamin , Rehmer, Birgit , Petrat, Torsten , Skrotzki, Birgit , Rethmeier, Michael

Laser powder-based directed energy deposition (DED-L) is increasingly being used in additive manufacturing (AM). As AM technology, DED-L must consider specific challenges. It must achieve uniform volume growth over hundreds of layers and avoid heat buildup of the deposited material. Herein, Ti-6Al-4V is fabricated using an approach that addresses these challenges and is relevant in terms of transferability to DED-L applications in AM. The assessment of the obtained properties and the discussion of their relationship to the process conditions and resulting microstructure are presented. The quality of the manufacturing process is proven in terms of the reproducibility of properties between individual blanks and with respect to the building height. The characterization demonstrates that excellent mechanical properties are achieved at room temperature and at 400 C.

View
No Thumbnail Available
Publication

Багатодротове дугове зварювання високоміцних дрібнозернистих сталей під флюсом

2022 , Gook, Sergej , El-Sari, Bassel , Biegler, Max , Rethmeier, Michael , Lichtenthäler, F. , Stark, M.

Ensuring the required mechanical-technological properties of welds is a critical issue in the application of multi-wire submerged arc welding process for welding high-strength fine-grained steels. Excessive heat input is one of the main causes for microstructural zones with deteriorated mechanical properties of the welded joint, such as a reduced notched impact strength and a lower structural robustness. A process variant is proposed which reduces the weld volume as well as the heat input by adjusting the welding wire configuration as well as the energetic parameters of the arcs, while retaining the advantages of multi-wire submerged arc welding such as high process stability and production speed

View