| | |
|---|
| 2021 | Breakdown of temperature sensitivity of silicon solar cells by simulation input parameters
Eberle, R.; Fell, A.; Schindler, F.; Shahid, J.; Schubert, M.C. | Journal Article |
| 2021 | Chemical modification of natural fibres to epoxy laminate for lightweight constructions
Gieparda, W.; Rojewski, S.; Wüstenhagen, S.; Kicinska-Jakubowska, A.; Krombholz, A. | Journal Article |
| 2021 | Cooperation of young researchers from science and industry - life cycle assessment in theory and practice
Albrecht, S.; Fischer, M. | Book Article |
| 2021 | Determining limitations of capacitance-voltage measurements of built-in voltage as an alternative to surface photovoltage for a-Si:H/c-Si heterojunctions
Hack, J.; Luderer, C.; Reichel, C.; Opila, R.; Bivour, M. | Journal Article |
| 2021 | Fiber bundle tracking method to analyze sheet molding compound microstructure based on computed tomography images
Schöttl, L.; Weidenmann, K.A.; Sabiston, T.; Inal, K.; Elsner, P. | Journal Article |
| 2021 | In-situ analysis of the effect of CaO/Fe2O3 addition on ash melting and sintering behavior for slagging-type applications
Shi, W.; Laabs, M.; Reinmöller, M.; Bai, J.; Guhl, S.; Kong, L.; Li, H.; Meyer, B.; Li, W. | Journal Article |
| 2021 | In-situ investigation of coal particle fragmentation induced by thermal stress and numerical analysis of the main influencing factors
Zhong, S.; Yue, H.; Baitalow, F.; Reinmöller, M.; Meyer, B. | Journal Article |
| 2021 | Industrial application of ceramic nanofiltration membranes for water treatment in oil sands mines
Motta Cabrera, Sandra; Winnubst, Louis; Richter, Hannes; Voigt, Ingolf; Nijmeijer, Arian | Journal Article |
| 2021 | Mixed-mode I/II fracture criteria for adhesively-bonded pultruded GFRP/steel joint
Jiang, Zhengwen; Fang, Zhi; Yan, Libo; Wan, Shui; Fang, Yawei | Journal Article |
| 2021 | The Potential of Cast Silicon
Schubert, M.; Schindler, F.; Benick, J.; Riepe, S.; Krenckel, P.; Richter, A.; Müller, R.; Hammann, B.; Nold, S. | Journal Article |
| 2020 | Abschlussbericht zu "MaterialDigital"
Schweizer, C.; Reichenbach, R.; Butz, A.; Lienhard, J.; Herrmann, T.; Preußner, J.; Hartrott, P. von; Friedmann, V.; Wessel, A.; Thomas, A.; Augenstein, E.; Oesterlin, H.; Tlatlik, E.; Bader, B.; Graf, M.; Baumann, S.; Grau, G.; Schindler, S.; Dauner, M.; Bullinger, F.; Tiberto, D.; Klotz, U.; Basler, C.; Bertz, A.; Blug, A.; Becker, A.; Goranov, A.; Burkhardt, C.; Hartman, H.; Körte, F. | Report |
| 2020 | Acoustic Process Monitoring in Laser Beam Welding
Schmidt, Leander; Römer, Florian; Böttger, David; Leinenbach, Frank; Straß, Benjamin; Wolter, Bernd; Stricker, Klaus; Seibold, Marc; Bergmann, Jean Pierre; Galdo, Giovanni del | Journal Article, Conference Paper |
| 2020 | Adjustment of the Life Cycle Inventory in Life Cycle Assessment for the Flexible Integration into Energy Systems Analysis
Betten, T.; Shammugam, S.; Graf, R. | Journal Article |
| 2020 | Advanced laboratory testing methods using real-time simulation and hardware-in-the-loop techniques
Montoya, J.; Brandl, R.; Vishwanath, K.; Johnson, J.; Darbali-Zamora, R.; Summers, A.; Hashimoto, J.; Kikusato, H.; Ustun, T.S.; Ninad, N.; Apablaza-Arancibia, E.; Bérard, J.-P.; Rivard, M.; Ali, S.Q.; Obushevs, A.; Heussen, K.; Stanev, R.; Guillo-Sansano, E.; Syed, M.H.; Burt, G.; Cho, C.; Yoo, H.-J.; Awasthi, C.P.; Wadhwa, K.; Bründlinger, R. | Journal Article |
| 2020 | Analyse und Evaluation von Mehrleiter-Wärmesystemen in Nahwärmenetzen auf Basis regenerativer Energien
Roller, Isabelle Dominique
: Busse, Matthias (Erstgutachter); Fette, Max (Zweitgutachter) | Master Thesis |
| 2020 | Analysis of the Behaviour between Measuring Distance and Image Resolution for Air Coupled Beamforming Microphone Array
Daudré, Julie
: Summa, Jannik (Day-to-Day Supervisor); Rabe, Ute (Betreuer); John, Thomas (Betreuer) | Bachelor Thesis |
| 2020 | Application of Hydrosilane-Free Atmospheric Pressure Chemical Vapor Deposition of SiOx Films in the Manufacture of Crystalline Silicon Solar Cells
Issa, E.; Nagel, H.; Bartsch, J.; Glatthaar, M.; Rädlein, E. | Journal Article |
| 2020 | Automatic In-Line Control and Correction of the Material Removal from CFRP Surfaces
Siang Yap, Jin
: Brieskorn, Leander (Betreuer); Hintze, Wolfgang (Erstprüfer); Weltin, Uwe (Zweitprüfer) | Master Thesis |
| 2020 | Bayesian network model for accessing safety and security of offshore wind farms
Ramírez-Agudelo, Oscar Hernán; Köpke, Corinna; Sill Torres, Frank | Conference Paper |
| 2020 | Bildverarbeitendes Regelungssystem für Heliostatenfelder
Bern, Gregor | Dissertation |
| 2020 | The BIM2LCA approach: An industry foundation classes (IFC)-based interface to integrate life cycle assessment in integral planning
Horn, R.; Ebertshäuser, S.; Di Bari, R.; Jorgji, O.; Traunspurger, R.; Both, P. von | Journal Article |
| 2020 | Bio-based adhesive mixtures of pine tannin and different types of lignins
Saražin, Jasa; Schmiedl, Detlev; Pizzi, Antonio; Sernek, Milan | Journal Article |
| 2020 | Biobased 'Mid-performance' composites using losses from the hackling process of long hemp - A feasibility study as part of the development of a biorefinery concept
Müssig, Jörg; Haag, Katharina; Musio, Salvatore; Bjelkova, Marie; Albrecht, Katharina; Uhrlaub, Birgit; Wang, Shaoliang; Wieland, Hans-Jörg; Amaducci, Stefano | Journal Article |
| 2020 | Bruchmechanische Betrachtungen bei der Umstellung von Erdgasleitungen aus Stahl für den Transport von Wasserstoff
Wackermann, K.; Huising, O.J.; Hoeveler, D.; Adämmer, F. | Journal Article |
| 2020 | Carbon, Glass and Basalt Fiber Reinforced Polybenzoxazine: The Effects of Fiber Reinforcement on Mechanical, Fire, Smoke and Toxicity Properties
Wolter, Nick; Beber, Vinicius Carrillo; Sandinge, Anna; Blomqvist, Per; Goethals, Frederik; Hove, Marc van; Jubete, Elena; Mayer, Bernd; Koschek, Katharina | Journal Article |
| 2020 | Ceramic microhotplates for low power metal oxide gas sensors
Samotaev, Nikolay; Oblov, Konstantin; Gorshkova, Anastasiya; Fritsch, Marco; Mosch, Sindy; Vinnichenko, Mykola; Trofimenko, Nikolai; Kusnezoff, Mihails; Fuchs, Franz-Marin; Wissmeier, Lena | Journal Article, Conference Paper |
| 2020 | Characterization of Ceramics based on Laser Speckle Photometry
Chen, Lili; Cikalova, Ulana; Münch, Stefan; Bendjus, Beatrice; Röllig, Mike | Journal Article |
| 2020 | Charakterisierung des Schädigungsverhaltens additiv gefertigter PLA-Prüfkörper mittels In-situ-Thermografie
Weiß, Julian
: Herrmann, Hans-Georg (Betreuer); Bechtel, Stephan | Master Thesis |
| 2020 | CO total and preferential oxidation over stable Au/TiO2 catalysts derived from preformed Au nanoparticles
Divins, Núria J.; López, Eduardo; Angurell, Inmaculada; Neuberg, Stefan; Zapf, Ralf; Kolb, Gunther; Llorca, Jordi | Journal Article |
| 2020 | Community!
Vallée, Till | Journal Article |
| 2020 | A Comparison of Different Solar Cell Technologies for Integrated Photovoltaics
Heinrich, M.; Kuhn, T.E.; Dimroth, F.; Würfel, U.; Goldschmidt, J.C.; Powalla, M.; Glunz, S.W.; Neuhaus, D.H. | Conference Paper |
| 2020 | Continuously manufactured single-core iron oxide nanoparticles for cancer theranostics as valuable contribution in translational research
Bleul, Regina; Baki, Abdulkader; Freese, Christian; Paysen, Hendrik; Kosch, Olaf; Wiekhorst, Frank | Journal Article |
| 2020 | Correlation between EVA Degree of Crosslinking and Moisture Ingress into PV Laminates
Mansour, D.E.; Mitterhofer, S.; Herzog, C.; Fokuhl, E.; Jankovec, M.; Gebhardt, P.; Philipp, D. | Conference Paper |
| 2020 | Cyclic Water Storage Behavior of Doubly Thermoresponsive Poly(sulfobetaine)-Based Diblock Copolymer Thin Films
Kreuzer, Lucas P.; Widmann, Tobias; Aldosari, Nawarah; Bießmann, Lorenz; Mangiapia, Gaetano; Hildebrand, Viet; Laschewsky, André; Papadakis, Christine M.; Müller-Buschbaum, Peter | Journal Article |
| 2020 | Determination of formation energies and phase diagrams of transition metal oxides with DFT+U
Mutter, D.; Urban, D.F.; Elsässer, C. | Journal Article |
| 2020 | Development of highly efficient four-junction solar cells based on antimonides
Predan, Felix
: Dimroth, Frank (Betreuer); Glunz, Stefan W. (Referent); Weber, Eicke R. (Referent) | Dissertation |
| 2020 | Digitalisierung manueller Prüfaufgaben - Schlüsseltechnologien optimieren ZfP-Systeme für Industrie 4.0
Leinenbach, Frank; Koster, Dirk; Sprau, Bernd | Journal Article |
| 2020 | Digitising part production: A new approach to creating unique part IDs for MIM components
Petzoldt, Frank; Kramer, Lutz | Journal Article |
| 2020 | Direct observation of lithium metal dendrites with ceramic solid electrolyte
Golozar, Maryam; Paolella, Andrea; Demers, Hendrix; Savoie, Sylvio; Girard, Gabriel; Delaporte, Nicolas; Gauvin, Raynald; Guerfi, Abdelbast; Lorrmann, Henning; Zaghib, Karim | Journal Article |
| 2020 | Doping Variation at the TCO/a-Si(p) Hole Contact
Luderer, C.; Tutsch, L.; Messmer, C.; Hermle, M.; Bivour, M. | Conference Paper |
| 2020 | Early Stage Quality Assesment in Silicon Ingots from MDP Brick Characterization
Kovvali, A.S.; Demant, M.; Rebba, B.; Schüler, N.; Haunschild, J.; Rein, S. | Conference Paper |
| 2020 | Eco-friendly sandwich panel based on bottle caps core and sustainable components: Static and dynamic characterisation
Resende Oliveira, Pablo; Kilchert, Sebastian; May, Michael; Panzera, Tulio Hallak; Scarpa, Fabrizio; Hiermaier, Stefan | Journal Article |
| 2020 | Effect of aluminium substrate thickness on the lap-shear strength of adhesively bonded and hybrid riveted-bonded joints
Beber, Vinicius Carrillo; Wolter, Nick; Schneider, Bernhard; Koschek, Katharina | Journal Article |
| 2020 | Effect of Dipole Orientation in Mixed, Charge-Equilibrated Self-assembled Monolayers on Protein Adsorption and Marine Biofouling
Koc, Julian; Schardt, Lisa; Nolte, Kim; Beyer, Cindy; Eckhard, Till; Schwiderowski, Philipp; Clarke, Jessica L.; Finlay, John A.; Clare, Anthony S.; Muhler, Martin; Laschewsky, André; Rosenhahn, Axel | Journal Article |
| 2020 | Enabling the In-Situ Stress and Temperature Measurement by Silicon Solar Cell Integrated Stress and Temperature Sensors for Photovoltaic Modules
Beinert, A.J.; Imm, M.; Benick, J.; Becker, F.; Seitz, S.; Heinrich, M.; Paul, O.; Glunz, S.W.; Aktaa, J.; Eitner, U.; Neuhaus, H. | Conference Paper |
| 2020 | Energiesysteme für die Stadt der Zukunft
Schmidt, Dieter | Presentation |
| 2020 | Energy Yield Modelling of 2D and 3D Curved Photovoltaic Modules
Neven-du Mont, S.; Heinrich, M.; Pfreundt, A.; Kutter, C.; Tummalieh, A.; Neuhaus, D.-H. | Conference Paper |
| 2020 | Enhancing PV Module Thermomechanical Performance and Reliability by an Innovative Mounting Solution
Beinert, A.; Masolin, A. | Conference Paper |
| 2020 | Enhancing the Utilization of Porous Li4Ti5O12 Layers for Thin-Film Lithium-Ion Batteries
Gockeln, Michael; Ruiter, Tom; Saura, Ana Palacios; Baric, Valentin; Glenneberg, Jens; Busse, Matthias; Pokhrel, Suman; Kun, Robert; Mädler, Lutz | Journal Article |
| 2020 | Entwicklung eines Energieversorgungskonzeptes - Leitprojekt ehemalige Trabrennbahn
Yu, Young Jae; Lamvers, Eric; Kallert, Anna | Report |
| 2020 | Entwicklung Stimuli-responsiver polymerer Werkstoffe auf Basis dynamisch kovalenter Chemie
Urbaniak, Tobias
: Hartwig, Andreas (Erstprüfer); Wöhrle, D. (Zweitprüfer) | Dissertation |
| 2020 | Erhöhung der Langzeitbeständigkeit struktureller Klebverbindungen durch betriebsfeste Auslegung und verbesserte Prozesskontrolle. Schlussbericht zu Nr. 8.2 NKBF 98
Nagel, Christof; Hoffmann, Michael; Baumert, Madlen; Lommatzsch, Uwe | Report |
| 2020 | Experimental Investigation of the Ignitor Plume/Probellant Interaction
Weiser, Volker; Kelzenberg, Stefan; Knapp, Sebastian | Conference Paper |
| 2020 | Experimental investigations for improved modelling of the laser sintering process of polymers
Rudloff, J.; Lang, M.; Mohseni-Mofidi, S.; Bierwisch, C. | Journal Article |
| 2020 | Experimentelle Analyse von horizontalen und leicht geneigten Zwei-Phasen-Thermosiphons für die solarthermische Fassadenintegration
Morawietz, Katharina
: Schnabel, Lena (Betreuerin); Stephan, Peter (Referent) | Dissertation |
| 2020 | Fadenzugverhalten von hochviskosen Epoxidharzen, Harzsuspensionen und industriellen Klebstoffen
Faßbender, Fabian Julius
: Mayer, Bernd (Erstgutachter); Butt, Hans Jürgen (Zweitgutachter) | Dissertation |
| 2020 | Gasochrome Sensoren - Optische Gassensoren für den Einsatz in Brandmeldern zur Brandgasfrüherkennung (GAS-O-CHROM)
Pannek, Carolin; Schaufelberger, Benjamin | Report |
| 2020 | Genetic Variability of Morphological, Flowering, and Biomass Quality Traits in Hemp (Cannabis sativa L.)
Petit, Jordi; Salentijn, Elma M.J.; Paulo, Maria-Joao; Thouminot, Claire; Dinter, Bert Jan van; Magagnini, Gianmaria; Gusovius, Hans-Jörg; Tang, Kailei; Amaducci, Stefano; Wang, Shaoliang; Uhrlaub, Birgit; Müssig, Jörg; Trindade, Luisa M. | Journal Article |
| 2020 | Grain-size effects on multi-wire slurry sawing of translucent alumina ceramics
Schmidtner, Lea; Herrmann, Mathias; Aneziris, Christos G. | Journal Article |
| 2020 | Gummi vor Verschleiß schützen
Paulkowski, Dominik; Ebert, Carsten | Book Article |
| 2020 | Halfway to Technical Stereocomplex PLA Products - an Arduous Path to a Breakthrough
Tarkhanov, Evgueni; Lehmann, André; Menrath, Andreas | Journal Article |
| 2020 | High Throughput Low Energy Industrial Emitter Diffusion and Oxidation
Meßmer, M.; Lohmüller, S.; Weber, J.; Piechulla, A.; Nold, S.; Horzel, J.; Wolf, A. | Conference Paper |
| 2020 | Hydrophobic, carbon free gas diffusion electrode for alkaline applications
Bekisch, Artur; Skadell, Karl; Poppitz, David; Schulz, Matthias; Weidl, Roland; Stelter, Michael | Journal Article |
| 2020 | Impact of Electric Vehicle Charging Infrastructure Expansion on Microgrid Economics: A Case Study
Sprengeler, M.; Freudenmacher, T.; Popova, R.; Nguyen, H.Q.; Rojas la Rotta, M.; Stryi-Hipp, G. | Conference Paper |
| 2020 | Impact of inorganic Nanoparticles on optical Properties of Low Refractive Index Waveguiding Polymers
Goldenberg, Leonid M.; Köhler, Mathias; Kahle, Olaf; Dreyer, Christian | Journal Article |
| 2020 | Impact of precrystallized NaYSi4O12 powders in the synthesis of sodium conducting solid electrolytes
Wagner, Dörte; Schilm, Jochen; Lee, Chang Woo; Kusnezoff, Mihails | Journal Article |
| 2020 | Implications of Aqueous Processing for High Energy Density Cathode Materials. Part I. Ni-Rich Layered Oxides
Hofmann, Michael; Kapuschinski, Martina; Guntow, Uwe; Giffin, Guinevere A. | Journal Article |
| 2020 | Influence of cemented carbide composition on cutting temperatures and corresponding hot hardnesses
Vornberger, Anne; Picker, Tobias; Pötschke, Johannes; Herrmann, Mathias; Denkena, Berend; Krödel, Alexander; Michaelis, Alexander | Journal Article |
| 2020 | Influence of the brazing paste composition on the wetting behavior of reactive air brazed metal-ceramic joints
Wätzig, Katja; Schilm, Jochen; Mosch, Sindy; Tillmann, Wolfgang; Eilers, Arne; Wojarski, Lukas | Journal Article |
| 2020 | Integrated Lightweight, Glass-Free PV Module Technology for Box Bodies of Commercial Trucks
Kutter, C.; Basler, F.; Alanis, L.E.; Markert, J.; Heinrich, M.; Neuhaus, D.H. | Conference Paper |
| 2020 | Irradiation tests of bolometer sensor prototypes for ITER
Meister, H.; Schmitt, Stefan; Szenthe, I.; Szakál, A.; Albrecht, H.; Gillemot, F. | Journal Article |
| 2020 | Klebstoffalterung bei chirurgischen Mehrweginstrumenten
Kolbe, Jana; Hummel, Joana | Journal Article |
| 2020 | Konsolidierungsmaßnahmen zur Verbesserung der mechanischen Eigenschaften in Lagengrenzbereichen der 3D Skelett Wickeltechnik
Mühlecker, Alexander | Master Thesis |
| 2020 | Laser Metal Bonding (LMB) - low impact joining of thin aluminum foil to silicon and silicon nitride surfaces
John, O.; Paschen, J.; Rose, A. de; Steinhauser, B.; Emanuel, G.; Brand, A.A.; Nekarda, J. | Journal Article, Conference Paper |
| 2020 | Laser Structuring of Open Cell Metal Foams for Micro Scale Surface Enlargement
Baumann, Robert; Rauscher, Thomas; Bernäcker, Christian Immanuel; Zwahr, Christoph; Weißgärber, T.; Röntzsch, L.; Lasagni, Andrés Fabián | Journal Article |
| 2020 | Loss analysis and optimization of PV module components and design to achieve higher energy yield and longer service life in desert regions
Hanifi, Hamed; Pander, Matthias; Zeller, Ulli; Ilse, Klemens; Dassler, David; Mirza, Mark; Bahattab, Mohammed A.; Jaeckel, Bengt; Hagendorf, Christian; Ebert, Matthias; Gottschalg, Ralph; Schneider, Jens | Journal Article |
| 2020 | Low Friction and Wear of Elastomers by DLC Coating
Bayrak, Suleyman; Paulkowski, Dominik | Journal Article |
| 2020 | LTCC Embedding of SiC Power Devices for High Temperature Applications over 400 °C
Bayer, Benjamin; Groccia, Mario; Bach, Hoang Linh; Bayer, Christoph Friedrich; Schletz, Andreas; Lenz, Christian; Ziesche, Steffen | Conference Paper |
| 2020 | Machbarkeitsstudie für ein Wärmenetzsystem 4.0 in Moosburg an der Isar. Zwischenbericht
Egelkamp, Robert; Kallert, Anna; Bader, Ulrich; Münnich, Dietmar; Doderer, Hannes | Report |
| 2020 | Matrix techniques for Lamb-wave damage imaging in metal plates
Neubeck, Robert; Kexel, Christian; Moll, Jochen | Journal Article |
| 2020 | Microchannel reactor heat-exchangers: A review of design strategies for the effective thermal coupling of gas phase reactions
Engelbrecht, Nicolaas; Everson, Raymond C.; Bessarabov, Dmitri; Kolb, Gunther | Journal Article |
| 2020 | Micromixer synthesis platform for a tuneable production of magnetic single-core iron oxide nanoparticles
Baki, Abdulkader; Löwa, Norbert; Remmo, Amani; Wiekhorst, Frank; Bleul, Regina | Journal Article |
| 2020 | Monitoring the Moisture Ingress into PV Modules by Measuring Capacitive Characteristics
Fokuhl, E.; Berg, H.; Stecklum, S.; Mansour, D.E.; Philipp, D.; Gebhardt, P. | Conference Paper |
| 2020 | More Realistic Consideration of Backsheets Coefficient of Thermal Expansion on Thermomechanics of PV Modules
Romer, P.; Oreski, G.; Beinert, A.J.; Neuhaus, H.; Mittag, M. | Conference Paper |
| 2020 | Multi-scale X-ray tomography and machine learning algorithms to study MoNi4 electrocatalysts anchored on MoO2 cuboids aligned on Ni foam
Topal, Emre; Liao, Zhongquan; Löffler, Markus; Gluch, Jürgen; Zhang, Jian; Feng, Xinliang; Zschech, Ehrenfried | Journal Article |
| 2020 | Nanostrukturierte Beschichtung
Meyer, F.; Burmeister, F. | Journal Article |
| 2020 | Neue Dämmstoffe auf dem Weg in die praktische Anwendung
Illner, Micha | Journal Article |
| 2020 | New details of assembling bioactive films from dispersions of amphiphilic molecules on titania surfaces
Francisco Goncalves Dias, Leonardo; Stamboroski, Stephani; Noeske, Michael; Salz, Dirk; Rischka, Klaus; Pereira, Renata; Carmo Mainardi, Maria do; Honorato Cardoso, Marina; Wiesing, Martin; Soares Bronze-Uhle, Erika; Barros Esteves Lins, Rodrigo; Noronha Lisboa Filho, Paulo | Journal Article |
| 2020 | A new sky imager based global irradiance forecasting model with analyses of cirrus situations
Dittmann, A.; Holland, N.; Lorenz, E. | Journal Article |
| 2020 | Next Generation NDE Sensor Systems as IIoT Elements of Industry 4.0
Valeske, Bernd; Osman, Achmad; Römer, Florian; Tschuncky, Ralf | Journal Article |
| 2020 | Non-polymer-matrix composite materials for space applications
May, Michael; Rupakula, Ganesh Deepak; Matura, Pascal | Journal Article |
| 2020 | Numerical study on I-section steel-reinforced concrete-filled steel tubes (SRCFST) under bending
Wang, Jun; Cheng, Xianfeng; Yan, Libo; Wu, Chao | Journal Article |
| 2020 | Numerische Untersuchung von Diffusionsprozessen in Mehrschichtsystemen
Mattfeldt, Sina
: Koch, Michael (Erstprüfer); Schoof, Sönke (Zweitprüfer); Hoffmann, Michael (Betreuer) | Bachelor Thesis |
| 2020 | On the functionalization and characterization of hydroxyl-terminated polybutadiene with octyl-1-azide and the evaluation of polyurethane elastomers based on such modified HTPB
Lemos, Mauricio Ferrapontoff; Mendes, Luis Claudio; Bohn, Manfred | Journal Article |
| 2020 | Optimierte Wärmeableitung aus Energiespeichern für Serien-Elektrofahrzeuge
Frauenhofer, Michael; Gormanns, Marc; Simon, Martin; Rütters, Martin; Fricke, Holger | Journal Article |
| 2020 | Optimized heat Dissipation of Energy Storage Systems
Frauenhofer, Michael; Gormanns, Marc; Simon, Martin; Rütters, Martin; Fricke, Holger | Journal Article |
| 2020 | Optimizing heat treatment parameters for the W-temper forming of 7xxx series aluminum alloys
Hebbar, S.; Kertsch, L.; Butz, A. | Journal Article |
| 2020 | Particle-based simulation, dimensional analysis and experimental validation of laser absorption and thermo-viscous flow during sintering of polymers
Bierwisch, C.; Mohseni-Mofidi, S.; Dietemann, B.; Kraft, T.; Rudloff, J.; Lang, M. | Journal Article, Conference Paper |
| 2020 | Plasma activation as a powerful tool for selective modification of cellulose fibers towards biomedical applications
Mauger, Olivia; Westphal, Sophia; Klöpzig, Stefanie; Krüger-Genge, Anne; Müller, Werner; Storsberg, Joachim; Bohrisch, Jörg | Journal Article |
| 2020 | Polymer Engineering 1
Eyerer, Peter; Schüle, Helmut | Book |
| 2020 | Polymer Engineering 3
: Eyerer, Peter; Schüle, Helmut; Elsner, Peter | Book |
| 2020 | Potential and Challenges of Vehicle Integrated Photovoltaics for Passenger Cars
Heinrich, M.; Kutter, C.; Basler, F.; Mittag, M.; Alanis, L.E.; Eberlein, D.; Schmid, A.; Reise, C.; Kroyer, T.; Neuhaus, D.H.; Wirth, H. | Conference Paper |
| 2020 | Precipitation hardening of high entropy alloy CoCrFeMnNi containing titanium
Eißmann, N.; Mühle, U.; Gaitzsch, U.; Walther, G.; Weißgärber, T.; Kieback, B. | Journal Article |
| 2020 | Processing of large and complex-shaped fine-grained alumina bodies with high transparency
Trunec, Martin; Kastyl, Jaroslav; Stastny, Premsyl; Hildebrandt, Stefanie | Journal Article |
| 2020 | Das Projekt "ZUPRÜVAL" im Überblick
Schäfer, Nils | Presentation |
| 2020 | Publisher correction: Non-cuttable material created through local resonance and strain rate effects
Szyniszewski, Stefan; Vogel, René; Bittner, Florian; Jakubczyk, Ewa; Anderson, Miranda; Pelacci, Manuel; Chinedu, Ajoku; Endres, Hans-Josef; Hipke, Thomas | Journal Article |
| 2020 | PV Backsheet Failure Analysis by Scanning Acoustic Microscopy
Mansour, D.E.; Kotterer, S.; Philipp, D.; Gebhardt, P. | Conference Paper |
| 2020 | The Race for the Best Silicon Bottom Cell. Efficiency and Cost Evaluation of Perovskite-Silicon Tandem Solar Cells
Messmer, C.; Goraya, B.S.; Nold, S.; Schulze, P.S.; Schön, J.; Goldschmidt, J.C.; Bivour, M.; Glunz, S.W.; Hermle, M. | Presentation |
| 2020 | A rapid testing method for fatigue in metal additive manufacturing
Meyenborg, Inga-Malena
: Mayer, Bernd (Erstprüfer); Dieckhoff, Stefan (Zweitprüfer) | Master Thesis |
| 2020 | Reduction of ECA Amount for the Ribbon Interconnection of Heterojunction Solar Cells
Kaiser, C.; Nikitina, V.; Geipel, T.; Kraft, A. | Conference Paper |
| 2020 | Reibungs- und Verschleißreduzierung von Elastomerbauteilen durch plasmabasierende Beschichtungen
Anders, Florian
: Lindner, Markus (Erstprüfer); Paulkowski, Dominik (Zweitprüfer) | Master Thesis |
| 2020 | Repulsion leads to coupled dislocation motion and extended work hardening in bcc metals
Srivastava, K.; Weygand, D.; Caillard, D.; Gumbsch, P. | Journal Article |
| 2020 | Resistive curing of glued-in rods
Ratsch, N.; Burnett-Barking, M.; Böhm, S.; Myslicki, Sebastian; Voß, Morten; Adam, Michael; Vallée, Till | Journal Article |
| 2020 | Riblet Surfaces for Improvement of Efficiency of Wind Turbines
Leitl, Peter A.; Stenzel, Volkmar; Flanschger, Andreas; Kordy, Heinrich; Feichtinger, Christoph; Kowalik, Yvonne; Schreck, Stefan; Stübing, Dorothea | Conference Paper |
| 2020 | Richtig kleben will gelernt sein. Tl.5: Klebstoffauswahl
Groß, Andreas | Journal Article |
| 2020 | Richtig kleben will gelernt sein. Tl.6: Oberflächenbehandlung
Groß, Andreas | Journal Article |
| 2020 | ROCOF Immunity in der Praxis (1). Stand der Technik und Anforderungen aus Normen
Schäfer, Nils | Presentation |
| 2020 | RoCoF: Theorie, Herausforderungen & Chancen
Arnold, Gunter | Presentation |
| 2020 | A Scanning Spreading Resistance Microscopy Study on a Laser-Doped Selective Phosphorous Emitters
Weber, J.; Brand, A.A. | Journal Article |
| 2020 | Sensitivity Analysis of Silicon PERC Solar Cells
Wasmer, Sven
: Backofen, R.; Weber, E.R.; Glunz, S. | Dissertation |
| 2020 | Sensory perception of non‐deuterated and deuterated organic compounds
Salthammer, Tunga; Monegel, Friederike; Schulz, Nicole; Uhde, Erik; Grimme, Stefan; Seibert, Jakob; Hohm, Uwe; Palm, Wolf-Ulrich | Journal Article |
| 2020 | Short-term forecast of solar irradiance with convolutional neural networks and spatio-temporal information
Aguilar Protti, Alexander | Master Thesis |
| 2020 | Silicon Sensors vs. Pyranometers - Review of Deviations and Conversion of Measured Values
Rivera, M.; Reise, C. | Conference Paper |
| 2020 | Simulationsgestützte Analyse von Through-hole Technology Verbindungsstellen der Elektronik im Automobilbereich
Berger, R.; Olfe, Jürgen; Rogowski, Sebastian; Röllig, Mike; Münch, Stefan; Schwerz, Robert; Heuer, Henning | Conference Paper |
| 2020 | Simultaneous Wireless Data and Power Transfer for a 1-Gb/s GaAs VCSEL and Photovoltaic Link
Fakidis, J.; Helmers, H.; Haas, H. | Journal Article |
| 2020 | Socio-technical analysis of a sanitation innovation in a peri-urban household in Durban, South Africa
Sutherland, Catherine; Reynaert, Eva; Dhlamini, Sifiso; Magwaza, Fanelesibonge; Lienert, Juri; Riechmann, Michel E.; Buthelezi, Sibongile; Khumalo, Duduzile; Morgenroth, Eberhard; Udert, Kai M.; Sindall, Rebecca C. | Journal Article |
| 2020 | Solderable PVD Al Back Contacts for the Module Integration of High-Efficiency c-Si Solar Cells
Nagel, H.; Gledhill, S.; Kroyer, T.; Eberlein, D.; Kraft, A.; Fischer, T.; Hain, A.; Wohlfart, P.; Glatthaar, M.; Glunz, S.W. | Conference Paper |
| 2020 | Sources and sinks driving sulfuric acid concentrations in contrasting environments: Implications on proxy calculations
Dada, Lubna; Ylivinkka, Ilona; Baalbaki, Rima; Li, Chang; Guo, Yishuo; Yan, Chao; Yao, Lei; Sarnela, Nina; Jokinen, Tuija; Dällenbach, Kaspar R.; Yin, Rujing; Deng, Chenjuan; Chu, Biwu; Nieminen, Tuomo; Wang, Yonghong; Lin, Zhuohui; Thakur, Roseline C.; Kontkanen, Jenni; Stolzenburg, Dominik; Sipilä, Mikko; Hussein, Tareq; Paasonen, Pauli; Bianchi, Federico; Salma, Imre; Weidinger, Tamás; Pikridas, Michael; Sciare, Jean; Jiang, Jingkun; Liu, Yongchun; Petäjä, Tuukka; Kerminen, Veli-Matti; Kulmala, Markku | Journal Article |
| 2020 | Sozio-E2S: Open Source Energiesystemmodellierung - Einfluss von soziokulturellen Faktoren auf Transformationspfade des deutschen Energiesystems. Schlussbericht
Senkpiel, C.; Berneiser, J.; Wassermann, S.; Lopez, E. | Report |
| 2020 | Structural sandwich composites out of wood foam core and textile reinforced concrete sheets for versatile and sustainable use in the building industry
Bunzel, Frauke; Wisner, Gregor; Stammen, Elisabeth; Dilger, Klaus | Journal Article, Conference Paper |
| 2020 | Surface Conditioning in Machining Processes
Schulze, Volker; Zanger, Frederik; Stampfer, Benedict; Seewig, Jörg; Uebel, Julian; Zabel, Andreas; Wolter, Bernd; Böttger, David | Journal Article |
| 2020 | Taylor-series expansion based numerical methods: A primer, performance benchmarking and new approaches for problems with non-smooth solutions
Thibault, J.; Tomar, S.; Agathos, K.; Mohseni-Mofidi, S.; Bordas, S.P.A. | Journal Article |
| 2020 | Techno-ökonomische Potentialanalyse rückspeisefähiger Elektrofahreuge in Kombination mit Charge@Work
Schünemann, Kevin
: Busse, Matthias (Erstgutachter); Klinck, Carl-Friedrich (Zweitgutachter); Hein, Martin (Betreuer) | Master Thesis |
| 2020 | Temperature-Induced Stoichiometric Changes in Thermally Grown Interfacial Oxide in Tunnel-Oxide Passivating Contacts
Polzin, J.-I.; Lange, S.; Richter, S.; Moldovan, A.; Bivour, M.; Hagendorf, C.; Hermle, M.; Glunz, S.W.; Feldmann, F. | Journal Article |
| 2020 | Temperatureinfluss auf NBR-Kautschuk und DLC-Schicht
Person, Jalessandro
: Lindner, Markus (Erstprüfer); Paulkowski, Dominik (Zweitprüfer) | Bachelor Thesis |
| 2020 | Towards programmable friction: Control of lubrication with ionic liquid mixtures by automated electrical regulation
Gatti, F.; Amann, T.; Kailer, A.; Baltes, N.; Rühe, J.; Gumbsch, P. | Journal Article |
| 2020 | Trend Tracking of Efficiency and CTM Ratio of PV Modules
Tummalieh, A.; Pfreundt, A.; Mittag, M. | Conference Paper |
| 2020 | Verfahren zur Bestimmung des Elastizitätsmoduls an der Wachsoberfläche mittels Nanoindentierung
Paulkowski, Dominik; Vissing, Klaus | Journal Article |
| 2020 | Versagensverhalten von CFK-Klebverbindungen
Roos, Cecil; Stammen, Elisabeth; Dilger, Klaus; Hesebeck, Olaf; Carillo Beber, Vinicius | Journal Article |
| 2020 | Volume crystallization and microwave dielectric properties of indialite/cordierite glass by TiO2 addition
Ohsato, Hitoshi; Varghese, Jobin; Kan, Akinori; Kim, Jeong Seog; Kagomiya, Isao; Ogawa, Hirotaka; Sebastian, Mailadil Thomas; Jantunen, Heli | Journal Article |
| 2020 | Wachstum und Materialverhalten von PECVD-Beschichtungen auf Elastomeren
Haltermann, Steffen
: Schmidt, Thomas (Erstprüfer); Wilken, Ralph (Zweitprüfer) | Bachelor Thesis |
| 2019 | Current State of Bone Adhesives - Necessities and Hurdles
Böker, Kai O.; Richter, Katharina; Jäckle, Katharina; Taheri, Shahed; Grunwald, Ingo; Borcherding, Kai; Byern, Janek von; Hartwig, Andreas; Wildemann, Britt; Schilling, Arndt F.; Lehmann, Wolfgang | Journal Article |
| 2019 | Dry demoulding - cost-effective PU components through permanent release coatings
Hopmann, Christian; Surray, Philipp; Schneider, Daniel; Vissing, Klaus; Noeske, Michael; Bitomsky, Peter | Journal Article |
| 2019 | Ermittlung des Treibhausgasminderungspotentials - Rahmenwerk in der Förderlinie EnEff.Gebäude.2050
Walther, K.; Meyer, R.; Schmid, M. | Report |
| 2019 | flexcontrol - netzdienliche Betriebsführungsstrategien für eine energieeffiziente Wärme- und Kälteversorgung von Gebäuden im GHD-Sektor. Endbericht
Frison, L.; Engelmann, P.; Klein, K.; Gölz, S.; Meyer, R.; Köhler, B.; Felsmann, C.; Schmidt, J.; Bachseitz, M.; Pfeiffer, D.; Knoll, P.; Koenigsdorff, R.; Becker, M.; Rehm, M.; Vennemann, S.; Ansari, E.; Kitzig, J.-P.; Rumler, N.; Post, T.; Massa Gray, F.; Reimann, S.; Löhning, M.; Gall, J.; Klimke, K. | Report |
| 2019 | Fraunhofer Institute for Chemical Technology. Annual Report 2018/2019
| Annual Report |
| 2019 | In-Mold Coating via transfer foil for fiber reinforced thermosets in aerospace application
Scheller, Joachim; Ott, Matthias; Baur, Pascal Joel | Conference Paper |
| 2019 | Reibungsreduzierung am elastomeren Bauteil und wirtschaftliche Beschichtung
Majd Bagdadi, Mohamad
: Lindner, Markus (Erstprüfer); Paulkowski, Dominik (Zweitprüfer) | Master Thesis |
| 2019 | Richtig kleben will gelernt sein. Tl.4: Gestalten einer Klebung
Groß, Andreas | Journal Article |
| 2019 | Simulation of Optical and Electrical Losses of PV Modules in Moderate and Desert Conditions
Hanifi, Hamed; Jaeckel, Bengt; Schneider, Jens | Conference Paper |
| 2019 | Technisch-ökonomische Analyse von rückspeisefähigen Elektrofahrzeugflotten zur Bereitstellung von Primärregelleistung
Tscherkai, Juri
: Mehler, Christian (Erstgutachter); Lösch, Stefan (Zweitgutachter) | Master Thesis |
| 2019 | Transformation of tribological modelling of squeeze flows to simulate the flow of highly viscous adhesives and sealants in manufacturing processes
Müller, Michael; Tong, Yan; Fricke, Holger; Vallée, Till | Journal Article, Conference Paper |
| 2019 | Trockene Entformung - Kosteneffektive PU-Bauteile durch permanente Trennschichten
Hopmann, C.; Surray, P.; Schneider, D.; Vissing, Klaus; Noeske, Michael; Bitomsky, Peter | Journal Article |
| 2019 | Werkstoffbasierter Festigkeitsnachweis für elektrische Antriebskomponenten
Loos, Daniel
: Melz, T.; Kirchner, E. | Dissertation |