Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Accounting for laser beam characteristics in the design of freeform optics for laser material processing
Völl, Annika; Wester, Rolf; Berens, Michael; Buske, Paul; Stollenwerk, Jochen; Loosen, Peter
Zeitschriftenaufsatz
2019Additive manufactured WE43 magnesium: A comparative study of the microstructure and mechanical properties with those of powder extruded and as-cast WE43
Zumdick, N.A.; Jauer, L.; Kersting, L.C.; Kutz, T.N.; Schleifenbaum, J.H.; Zander, D.
Zeitschriftenaufsatz
2019Cargo shuttling by electrochemical switching of core-shell microgels obtained by a facile one-shot polymerization
Mergel, Olga; Schneider, Sabine; Tiwari, Rahul; Kühn, Philipp T.; Keskin, Damla; Stuart, Marc C.A.; Schöttner, Sebastian; Kanter, Martinus Jacobus Maria de; Noyong, Michael; Caumanns, Tobias; Mayer, Joachim; Janzen, Christoph; Simon, Ulrich; Gallei, Markus; Wöll, Dominik; Rijn, Parick van; Plamper, Felix A.
Zeitschriftenaufsatz
2019CNT-reinforced AlSi10Mg composite by selective laser melting: Microstructural and mechanical properties
Liu, Xihe; Zhao, Congcong; Zhou, Xin; Eibl, Florian; Shen, Zhijian; Liu, Wei; Meiners, Wilhelm
Zeitschriftenaufsatz
2019Development of a solvent-free polylactide/calcium carbonate composite for selective laser sintering of bone tissue engineering scaffolds
Gayer, Christoph; Ritter, Jessica; Bullemer, Martin; Grom, Stephanie; Meiners, Wilhelm; Pfister, Andreas; Reinauer, Frank; Vučak, Marijan; Wissenbach, Konrad; Fischer, Horst; Poprawe, Reinhart; Schleifenbaum, Johannes Henrich; Jauer, Lucas
Zeitschriftenaufsatz
2019Development of low pressure cold sprayed copper coatings on carbon fiber reinforced polymer (CFRP)
Gillet, Vincent; Aubignat, Emilie; Costil, Sophie; Courant, Bruno; Langlade, Cecile; Casari, Pascal; Knapp, Wolfgang; Planche, Marie Pierre
Zeitschriftenaufsatz
2019Diode‑pumped Alexandrite laser for next generation satellite‑based earth observation lidar
Strotkamp, Michael; Munk, Alexander; Jungbluth, Bernd; Hoffmann, Hans-Dieter; Höffner, Josef
Zeitschriftenaufsatz
2019Effect of damage incubation in the laser grooving of sapphire
Sakurai, Haruyuki; He, Chao; Konishi, Kuniaki; Tamaru, Hiroharu; Yumoto, Junji; Kuwata-Gonokami, Makoto; Gillner, Arnold
Zeitschriftenaufsatz
2019Equipment and process windows for laser metal deposition with coaxial wire feeding
Kelbassa, Jana; Gasser, Andres; Bremer, Jan; Pütsch, Oliver; Poprawe, Reinhart; Schleifenbaum, Johannes Henrich
Zeitschriftenaufsatz
2019Feasibility Investigation for Laser Powder Bed Fusion of High-Speed Steel AISI M50 with Base Plate Preheating System
Saewe, J.; Gayer, C.; Vogelpoth, A.; Schleifenbaum, J.H.
Konferenzbeitrag, Zeitschriftenaufsatz
2019Formation Quality, Mechanical Properties, and Processing Behavior of Pure Zinc Parts Produced by Laser-Based Manufacturing for Biodegradable Implants
Voshage, Maximilian; Wen, Peng; Schaukellis, Max; Schleifenbaum, Johannes Henrich
Zeitschriftenaufsatz
2019Future AM. Die nächste Generation additiver Fertigungsverfahren
Schleifenbaum, Johannes Heinrich; Tenbrock, C.; Emmelmann, Claus; Leyens, Christoph; Brückner, Frank; Michaelis, Alexander
Aufsatz in Buch
2019High-Efficiency Sub-Micrometer Multi-Beam Interference Structuring for Large-Scale Surface Using Ultrashort Laser Pulses
He, Chao; Vannahme, Kai; Gillner, Arnold
Zeitschriftenaufsatz
2019High-flux ultrafast extreme-ultraviolet photoemission spectroscopy at 18.4 MHz pulse repetition rate
Saule, T.; Heinrich, S.; Schötz, J.; Lilienfein, N.; Högner, M.; Vries, O. de; Plötner, M.; Weitenberg, J.; Esser, D.; Schulte, J.; Russbueldt, P.; Limpert, J.; Kling, M.F.; Kleineberg, U.; Pupeza, T.
Zeitschriftenaufsatz
2019In situ high speed diagnosis - A quantitative analysis of melt flow dynamics inside cutting kerfs during laser fusion cutting with 1 μm wavelength
Arntz, Dennis; Petring, Dirk; Schneider, Frank; Poprawe, Reinhart
Zeitschriftenaufsatz
2019In-Situ Analysis of Ultrashort Pulsed Laser Ablation with Pulse Bursts
Bornschlegel, Benedikt; Finger, Johannes-Thomas
Zeitschriftenaufsatz
2019Increasing Productivity of Ultrashort Pulsed Laser Ablation in Advance for a Combination Process with ns-laser
Brenner, Andreas; Bornschlegel, Benedikt; Finger, Johannes-Thomas
Zeitschriftenaufsatz
2019Increasing resource efficiency with an engineering decision support system for comparison of product design variants
Buchert, Tom; Ko, Nathanael; Graf, Roberta; Vollmer, Thomas; Alkhayat, Moritz; Brandenburg, Elisabeth; Stark, Rainer; Klocke, Fritz; Leistner, Philip; Schleifenbaum, Johannes Henrich
Zeitschriftenaufsatz
2019Influence of laser parameters on tensile shear strength of copper welds
Eisenreich, Nathanael; Aeckerle, Michael; Bantel, Christoph; Heider, Andreas; Olowinsky, Alexander
Zeitschriftenaufsatz
2019Influence of laser wavelength and beam profile on the coagulation depth in a soft tissue phantom model
Wehner, M.; Betz, P.; Aden, M.
Zeitschriftenaufsatz
2019The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing
Sui, S.; Tan, H.; Chen, J.; Zhong, C.; Li, Z.; Fan, W.; Gasser, A.; Huang, W.
Zeitschriftenaufsatz
2019Influence of spatial power modulation on pore and crack formation in laser beam welding of aluminum
Heinen, Paul; Eichler, Florian; Häusler, André; Olowinsky, Alexander; Aden, Mirko; Gillner, Arnold; Poprawe, Reinhart
Zeitschriftenaufsatz
2019Investigations on the Interplay Between Focusing and Absorption in Absorber-Free Laser Transmission Welding of Plastics
Mamuschkin, Viktor; Aden, Mirko; Olowinsky, Alexander
Zeitschriftenaufsatz
2019Large-area UV-processing with a novel 248nm line beam system
Delmdahl, Ralph; Trenn, Matthias; Hördemann, Christian; Gillner, Arnold
Konferenzbeitrag
2019Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance
Gu, Dongdong; Zhang, Hongmei; Dai, Donghua; Xia, Mujian; Hong, Chen; Poprawe, Reinhart
Zeitschriftenaufsatz
2019Laser additive manufacturing of Zn metal parts for biodegradable implants: Effect of gas flow on evaporation and formation quality
Chen, Yanzhe; Wen, Peng; Voshage, Maximilian; Jauer, Lucas; Qin, Yu; Schleifenbaum, Johannes Henrich; Poprawe, R.
Zeitschriftenaufsatz
2019Laser additive manufacturing of Zn porous scaffolds: Shielding gas flow, surface quality and densification
Wen, Peng; Qin, Yu; Voshage, Maximilian; Jauer, Lucas; Poprawe, Reinhart; Schleifenbaum, Johannes Henrich
Zeitschriftenaufsatz
2019Laser Powder Bed Fusion of Advanced High-Strength Steels - Modification of Deformation Mechanisms by Increasing Stacking Fault Energy
Ewald, Simon; Schaukellis, Max; Köhnen, Patrick; Schleifenbaum, Johannes Henrich
Zeitschriftenaufsatz
2019Local laser softening of high-strength steel with an adapted intensity
Vogt, Sabrina; Völl, Annika; Wollgarten, Susanne; Freese, Thomas; Stollenwerk, Jochen; Weisheit, Andreas; Loosen, Peter
Zeitschriftenaufsatz
2019Numerical simulation in the absorption behavior of Ti6Al4V powder materials to laser energy during SLM
Zhang, D.; Wang, W.; Guo, Y.; Hu, S.; Dong, D.; Ziegler, S.; Schleifenbaum, J.H.
Zeitschriftenaufsatz
2019Porous structure design and fabrication of metal-bonded diamond grinding wheel based on selective laser melting (SLM)
Tian, C.; Li, X.; Zhang, S.; Guo, G.; Ziegler, S.; Schleifenbaum, J.H.; Wang, L.; Rong, Y.
Zeitschriftenaufsatz
2019Precipitation Hardenable High Entropy Alloy for Tooling Applications
Stryzhyboroda, Oleg; Hecht, U.; Witusiewicz, V.T.; Laplanche, G.; Asabre, A.; Wilms, Markus Benjamin; Weisheit, Andreas
Zeitschriftenaufsatz
2019Printability of gas atomized Mo-Si-B powders by laser metal deposition
Schmelzer, J.; Rittinghaus, S.-K.; Weisheit, A.; Stobik, M.; Paulus, J.; Gruber, K.; Wessel, E.; Heinze, C.; Krüger, M.
Zeitschriftenaufsatz
2019Rapid Alloy Development of Extremely High-Alloyed Metals Using Powder Blends in Laser Powder Bed Fusion
Ewald, Simon; Kies, Fabian; Hermsen, Steffen; Voshage, Maximilian; Haase, Christian; Schleifenbaum, Johannes Henrich
Zeitschriftenaufsatz
2019Strongly Out-of-Equilibrium Columnar Solidification During Laser Powder-Bed Fusion in Additive Manufacturing
Boussinot, G.; Apel, M.; Zielinski, J.; Hecht, U.; Schleifenbaum, J.H.
Zeitschriftenaufsatz
2019Study of nickel-based super-alloys Inconel 718 and Inconel 625 in high-deposition-rate laser metal deposition
Zhong, C.; Kittel, J.; Gasser, A.; Schleifenbaum, J.H.
Zeitschriftenaufsatz
2019Surface structuring by laser remelting of 1.2379 (D2) for cold forging tools in automotive applications
Temmler, André; Comiotto, Mirco; Roß, Ingo; Küpper, Moritz; Liu, Dan M.; Poprawe, Reinhart
Zeitschriftenaufsatz
201810 W CEP-stable few-cycle source at 2 µm with 100 kHz repetition rate
Neuhaus, M.; Fuest, H.; Seeger, M.; Schötz, J.; Trubetskov, M.; Russbueldt, P.; Hoffmann, H.D.; Riedle, E.; Major, Zs.; Pervak, V.; Kling, M.F.; Wnuk, P.
Zeitschriftenaufsatz
20183D Printing Creates Patient-Specific Implants
Gayer, C.
Zeitschriftenaufsatz
2018Additive manufacturing of honeycombs seal strips
Geisen, O.; Kersting, L.; Masseling, L.; Bogner, J.P.; Schleifenbaum, J.H.
Konferenzbeitrag
2018Ageing response of an Al-Mg-Mn-Sc-Zr alloy processed by laser metal deposition in thin-wall structures
Zhao, T.; Cai, W.; Dahmen, M.; Schaible, J.; Hong, C.; Gasser, Andres; Weisheit, Andreas; Biermann, T.; Kelbassa, I.; Zhang, H.; Gu, D.; Schleifenbaum, J.H.
Zeitschriftenaufsatz
2018Application specific intensity distributions for laser materials processing: Tailoring the induced temperature profile
Völl, A.; Vogt, S.; Wester, R.; Stollenwerk, S.; Loosen, P.
Zeitschriftenaufsatz
2018Automatable support removal and surface smoothing of additive manufactured parts made of AlSi10Mg
Schmithüsen, T.; Bremen, S.; Schleifenbaum, J.H.
Konferenzbeitrag
2018Automated and model-based assembly of an anamorphic telescope
Holters, M.; Dirks, S.; Stollenwerk, J.; Loosen, P.
Konferenzbeitrag
2018Biodegradable Zn metal implants manufactured by laser powder bed fusion
Qin, Yu; Wen, Peng; Chen, Yanzhe; Jauer, Lucas; Voshage, Maximilian; Poprawe, Reinhart; Schleifenbaum, Johannes Henrich
Abstract
2018CFRP is demanding - also on laser cutting
Schneider, F.; Petring, D.
Zeitschriftenaufsatz
2018Characterization of additively manufactured metal flexure hinges
Kimm, M.; Schueckler, P.; Schoenen, D.; Corves, B.; Schleifenbaum, J.H.
Konferenzbeitrag
2018Coaxial beam shaping for laser materials processing
Pütsch, O.; Kelbassa, J.; Stollenwerk, J.; Gasser, A.; Loosen, P.
Zeitschriftenaufsatz
2018Combination of short and ultrashort pulse laser processing for productive large scale structuring of 3D plastic mould steel
Brenner, A.; Kurzidim, F.; Fornaroli, C.; Gillner, A.
Zeitschriftenaufsatz
2018Comparison of laser-based joining approaches for plastic-metal-hybrids - stength vs. process speed
Straeten, K. van der; Engelmann, C.; Olowinsky, A.; Gillner, A.
Konferenzbeitrag
2018Comparison of material specific rim zone effects of Ti6Al4V machined by wire EDM in water- and CH- based dielectrics
Klocke, F.; Smeets, G.; Kittel, M.; Olivier, M.; Hama-Saleh, R.; Harst, S.; Klink, A.
Zeitschriftenaufsatz, Konferenzbeitrag
2018Composite bonding pre-treatment with laser radiation of 3 µm wavelength: Comparison with conventional laser sources
Blass, D.; Nyga, S.; Jungbluth, B.; Hoffmann, H.-D.; Dilger, K.
Zeitschriftenaufsatz
2018Deburring and rounding of sheet metals and functionally relevant edges of parts using laser radiation
Kumstel, J.; Lüken, S.
Konferenzbeitrag
2018Densification behavior of pure Zn metal parts produced by selective laser melting for manufacturing biodegradable implants
Wen, P.; Jauer, L.; Voshage, M.; Chen, Y.; Poprawe, R.; Schleifenbaum, J.H.
Zeitschriftenaufsatz
2018Density estimation in optical phase space for optimizing micro-optical elements on freeform surfaces
Berens, M.; Völl, A.; Wester, R.; Stollenwerk, J.; Loosen, P.
Konferenzbeitrag
2018Depositing laser-generated nanoparticles on powders for additive manufacturing of oxide dispersed strengthened alloy parts via laser metal deposition
Streubel, R.; Wilms, M.B.; Doñate-Buendía, C.; Weisheit, A.; Barcikowski, S.; Schleifenbaum, J.H.; Gökce, B.
Zeitschriftenaufsatz
2018Design framework for model-based self-optimizing manufacturing systems
Thombansen, Ulrich; Buchholz, Guido; Frank, Daniel; Heinisch, Julian; Kemper, Maximilian; Pullen, Thomas; Reimer, Viktor; Rotshteyn, Grigory; Schwenzer, Max; Stemmler, Sebastian; Abel, Dirk; Gries, Thomas; Hopmann, Christian; Klocke, Fritz; Poprawe, Reinhardt; Reisgen, Uwe; Schmitt, Robert
Zeitschriftenaufsatz
2018Design of high-manganese steels for additive manufacturing applications with energy-absorption functionality
Kies, F.; Köhnen, P.; Wilms, M.B.; Brasche, F.; Pradeep, K.G.; Schwedt, A.; Richter, S.; Weisheit, A.; Schleifenbaum, J.H.; Haase, C.
Zeitschriftenaufsatz
2018Development of a flexible low laser power hybrid (LLPH) technology for shipbuilding including additive manufactured semi-automated hand-held unit
Cerwenka, G.; Steinmeier, O.; Petronis, E.; Keßler, T.; Fischer, H.W.A.; Fiedler, W.; Schulze, F.; Emmelmann, C.
Zeitschriftenaufsatz, Konferenzbeitrag
2018Development of adapted Ni-738 powder for additive manufacturing
Vogelpoth, A.; Sharma, S.; Schleifenbaum, J.H.
Konferenzbeitrag
2018Development of an adaptive laser beam shaper
König, H.-G.; Pütsch, O.; Lange, F.; Stollenwerk, J.; Loosen, P.
Konferenzbeitrag
2018Diamond lenses enable ultra-compact and lightweight laser processing heads
Traub, M.; Holly, C.; Meo, A. di; Arntz, D,; Hesker, M.; Hoffmann, D.; Nebel, C.; Poprawe, R.
Konferenzbeitrag
2018Digital photonic production along the lines of industry 4.0
Poprawe, R.; Hinke, C.; Meiners, W.; Eibl, F.; Zarei, O.; Voshage, M.; Ziegler, S.; Schleifenbaum, J.H.; Gasser, A.; Schopphoven, T.; Willenborg, E.; Flemmer, J.; Weingarten, C.; Finger, J.; Reininghaus, M.
Konferenzbeitrag
2018Diode-pumped Alexandrite ring laser in single-longitudinal mode operation for atmospheric lidar measurements
Munk, A.; Jungbluth, B.; Strotkamp, M.; Hoffmann, H.-D.; Poprawe, R.; Höffner, J.; Lübken, F.-J.
Zeitschriftenaufsatz
2018Diode-pumped Q-switched Alexandrite laser in single longitudinal mode operation with Watt-level output power
Munk, A.; Strotkamp, M.; Walochnik, M.; Jungbluth, B.; Traub, M.; Hoffmann, H.-D.; Poprawe, R.; Höffner, J.; Lübken, F.-J.
Zeitschriftenaufsatz
2018Diodenlaser ebnet Weg zu Hybrid-Bauteilen. Reproduzierbares quasisimultanes Laserfügen ersetzt Klebeprozesse
Molitor, T.; Engelmann, C.
Zeitschriftenaufsatz
2018Direct laser cladding of the silicide dispersed titanium aluminide (Ti45Al5Nb0.5Si) composites
Dutta Majumdar, J.; Rittinghaus, S.K.; Wissenbach, K.; Höche, D.; Blawert, C.; Weisheit, A.
Zeitschriftenaufsatz
2018Directly q-switched high power resonator based on XLMA-fibers
Giesberts, M.; Fitzau, O.; Hoffmann, H.-D.; Lange, R.; Bachert, C.; Krause, V.
Konferenzbeitrag
2018Editorial. Laser applications around the world
Leyens, C.; Poprawe, R.
Zeitschriftenaufsatz
2018Efficient numerical modeling of 3D-printed lattice-cell structures using neural networks
Koeppe, A.; Hernandez Padilla, C.A.; Voshage, M.; Schleifenbaum, J.H.; Markert, B.
Zeitschriftenaufsatz
2018EHLA research team wins renowned Berthold Leibinger Innovationspreis 2018
Nolis, P.
Zeitschriftenaufsatz
2018Electrochemical characterization of laser-carbonized polyacrylonitrile nanofiber nonwovens
Go, D.; Opitz, M.; Lott, P.; Rahimi, K.; Stollenwerk, J.; Thomas, H.; Möller, M.; Roling, B.; Kuehne, A.J.C.
Zeitschriftenaufsatz
2018Erhöhung der Strahldichte von Hochleistungs-Diodenlaserbarren mittels dielektrischer Kantenfilter
Witte, U.
Dissertation
2018Feasibility investigation for laser powder bed fusion of high-speed steels
Saewe, J.; Gayer, C.; Jauer, L.; Kunz, J.; Broeckmann, C.; Schleifenbaum, J.H.
Konferenzbeitrag
2018Fiber laser cutting: The use of carbon-filled acrylic as a qualitative and quantitative analysis tool
Atiyah, H.; Powell, J.; Petring, D.; Stoyanov, S.; Voisey, K.T.
Zeitschriftenaufsatz
2018Fiber-coupled three-micron pulsed laser source for CFRP laser treatment
Nyga, S.; Blass, D.; Katzy, V.; Westphalen, T.; Jungbluth, B.; Hoffmann, H.-D.
Konferenzbeitrag
2018Fraunhofer-Institut für Lasertechnik. Jahresbericht 2017
 
Jahresbericht
2018Free-form optics for non-idealized light sources in 3D: A phase-space approach
Völl, A.; Wester, R.; Buske, P.; Berens, M.; Stollenwerk, J.; Loosen, P.
Konferenzbeitrag
2018Fully integrated Q-switch for commercial high-power resonator with solitary XLMA-fiber
Lange, R.; Bachert, C.; Rehmann, G.; Weber, H.; Luxen, R.; Enns, H.; Schenk, M.; Hosdorf, S.; Marfels, S.; Bay, M.; Kösters, A.; Krause, V.; Giesberts, M.; Fitzau, O.; Hoffmann, H.-D.
Konferenzbeitrag
2018Heat input and accumulation for ultrashort pulse processing with high average power
Finger, J.; Bornschlegel, B.; Reininghaus, M.; Dohrn, A.; Nießen, M.; Gillner, A.; Poprawe, R.
Zeitschriftenaufsatz
2018Heat treatment of laser metal deposited TiAl TNM alloy
Rittinghaus, S.-K.; Hecht, U.; Werner, V.; Weisheit, A.
Zeitschriftenaufsatz
2018Heat-induced molten pool boundary softening behavior and its effect on tensile properties of laser additive manufactured aluminum alloy
Dai, D.; Gu, D.; Zhang, H.; Zhang, J.; Du, Y.; Zhao, T.; Hong, C.; Gasser, A.; Poprawe, R.
Zeitschriftenaufsatz
2018Helical drilling of three-dimensional conical converging-diverging nozzle in steel using ultrashort laser pulses
He, C.; Bühring, J.; Gillner, A.
Zeitschriftenaufsatz, Konferenzbeitrag
2018High-efficiency nanostructuring using multi-beam interference by consecutively deposited ultrashort laser pulses on tool steel
He, C.; Steger, M.; Gillner, A.
Zeitschriftenaufsatz
2018Hochproduktive additive Fertigung durch Extremes Hochgeschwindigkeits-Laserauftragschweißen (EHLA) am Beispiel der Strukturierung einer Dressierwalze
Opitz, Tobias; Bremer, Jan; Schopphoven, Thomas; Pawelski, Hartmut; Vogd, Matthias
Studie
2018Hybrider Werkstoffverbund zwischen einer Metalloberfläche und einer polymeren Materialoberfläche sowie Verfahren zur Herstellung des hybriden Werkstoffverbundes
Engelmann, Christoph; Gillner, Arnold; Olowinsky, Alexander; Straeten, Kira van der
Patent
2018An improved scanning strategy for long pulsed laser drilling of carbon fiber textiles
Janssen, S.; Eckstein, M.C.
Zeitschriftenaufsatz
2018In situ visualization of multiple reflections on the cut flank during laser cutting with 1 μm wavelength
Arntz, D.; Petring, D.; Stoyanov, S.; Jansen, U.; Schneider, F.; Poprawe, R.
Zeitschriftenaufsatz
2018Influence of Climatic Changes on the Joint Strength of Laser Joined Plastic-Metal-Hybrids
Straeten, K. van der; Olowinsky, A.; Gillner, A.
Zeitschriftenaufsatz
2018Influence of powder bed temperature on microstructure and post heat treatment of high speed steel AISI M50 processed by laser-powder bed fusion
Kunz, J.; Herzog, S.; Kaletsch, A.; Broeckmann, C.; Saewe, J.; Gayer, C.; Schleifenbaum, J.H.
Konferenzbeitrag
2018Influence of scan strategy and molten pool configuration on microstructures and tensile properties of selective laser melting additive manufactured aluminum based parts
Dai, D.; Gu, Dongdong; Zhang, H.; Xiong, J.; Ma, C.; Hong, C.; Poprawe, R.
Zeitschriftenaufsatz
2018Influence of solution heat treatment on microstructure and tensile properties of Inconel 718 formed by high-deposition-rate laser metal deposition
Sui, S.; Zhong, C.; Chen, J.; Gasser, A.; Huang, W.; Schleifenbaum, J.H.
Zeitschriftenaufsatz
2018Influence of the material properties of a poly(D,L-lactide)/β-tricalcium phosphate composite on the processability by selective laser sintering
Gayer, C.; Abert, C.; Bullemer, M.; Grom, S.; Jauer, L.; Meiners, W.; Reinauer, F.; Vučak, M.; Wissenbach, K.; Poprawe, R.; Schleifenbaum, J.H.; Fischer, H.
Zeitschriftenaufsatz
2018Introducing a Holistic Profitability Model for Additive Manufacturing: An Analysis of Laser-powder Bed Fusion
Piller, Frank T.; Poprawe, Reinhart; Schleifenbaum, Johannes Henrich; Schuh, Günther; Barg, Sebastian; Dölle, Christian; Hinke, Christian; Jank, M.-H.; Jiang, R.; Meiners, Wilhelm; Riesener, Michael; Schrage, Johannes; Ziegler, Stephan
Konferenzbeitrag
2018Investigation of friction conditions in dry metal forming of aluminum by extended conical tube-upsetting tests
Teller, M.; Ross, I.; Temmler, A.; Poprawe, R.; Prünte, S.; Schneider, J.M.; Hirt, G.
Konferenzbeitrag
2018Investigation to increase the welding joint area with modulated laser beam welding over gap
Chung, W.; Häusler, A.; Olowinsky, A.; Gillner, A.; Poprawe, R.
Zeitschriftenaufsatz
2018Investigations on energy deposition in polycarbonate by picosecond laser pulses for welding applications
Nguyen, P.; Fatherazi, P.; Nippgen, S.; Brosda, M.; Olowinksy, A.; Gillner, A.
Zeitschriftenaufsatz, Konferenzbeitrag
2018Large Scale Ultrafast Laser Micro Texturing with Multi-Beams
Bruening, S.; Jarczynski, M.; Du, K.; Gillner, A.
Zeitschriftenaufsatz
2018Laser additive manufacturing of oxide dispersion strengthened steels using laser-generated nanoparticle-metal composite powders
Wilms, M.B.; Streubel, R.; Frömel, F.; Weisheit, A.; Tenkamp, J.; Walther, F.; Barcikowski, S.; Schleifenbaum, J.H.; Gökce, B.
Zeitschriftenaufsatz, Konferenzbeitrag
2018Laser additive manufacturing of Zn metal parts for biodegradable applications: Processing, formation quality and mechanical properties
Wen, P.; Voshage, M.; Jauer, L.; Chen, Y.; Qin, Y.; Poprawe, R.; Schleifenbaum, J.H.
Zeitschriftenaufsatz
2018Laser polishing of cold work steel AISI D2 for dry metal forming tools
Ross, I.; Temmler, A.; Küpper, M.; Prünte, S.; Teller, M.; Schneider, J.M.; Poprawe, R.
Konferenzbeitrag
2018Laser powder bed fusion of stainless steel with high power multi-diode-laser-array
Eibl, F.
Dissertation
2018Laser-based plastic-metal-joining with self-organizing microstructures considering different load directions
Straeten, K. van der; Olowinsky, A.; Gillner, A.
Zeitschriftenaufsatz
2018Laserbasierte Formkorrektur von optischen Gläsern
Weingarten, C.
Dissertation
2018Lasermikropolieren von Metallen
Nüsser, Christian
Dissertation
2018Laserwelding of biopolymers
Brosda, M.; Nguyen, P.; Olowinsky, A.; Gillner, A.
Zeitschriftenaufsatz, Konferenzbeitrag
2018LIBS analyses for industrial applications - an overview of developments from 2014 to 2018
Noll, R.; Fricke-Begemann, C.; Connemann, S.; Meinhardt, C.; Sturm, V.
Zeitschriftenaufsatz
2018Local laser softening of press-hardened steel at high feed rates
Vogt, S.; Bechheim, L.; Banik, J.; Flaischerowitz, M.; Weisheit, A.; Schleifenbaum, J.H.
Zeitschriftenaufsatz
2018Machine learning as a comparative tool to determine the relevance of signal features in laser welding
Knaak, C.; Thombansen, U.; Abels, P.; Kröger, M.
Zeitschriftenaufsatz, Konferenzbeitrag
2018Measurement methods to build up the digital optical twin
Prochnau, M.; Holzbrink, M.; Wang, W.; Holters, M.; Stollenwerk, J.; Loosen, P.
Konferenzbeitrag
2018Mechanical properties and deformation behavior of additively manufactured lattice structures of stainless steel
Köhnen, P.; Haase, C.; Bültmann, J.; Ziegler, S.; Schleifenbaum, J.H.; Bleck, W.
Zeitschriftenaufsatz
2018Mechanical properties of sheet metal components with local reinforcement produced by additive manufacturing
Ünsal, I.; Hama-Saleh, R.; Sviridov, A.; Bambach, M.; Weisheit, A.; Schleifenbaum, J.H.
Konferenzbeitrag
2018Melt spreading behavior, microstructure evolution and wear resistance of selective laser melting additive manufactured AlN/AlSi10Mg nanocomposite
Dai, D.; Gu, D.; Xia, M.; Ma, C.; Chen, H.; Zhao, T.; Hong, C.; Gasser, A.; Poprawe, R.
Zeitschriftenaufsatz
2018Micro-powder bed fusion (μ-PBF) - Extremely high resolution for small-scale applications
Masseling, L.; Gayer, C.
Konferenzbeitrag
2018Microstructure of WE43 fabricated by Laser-Powder Bed Fusion in comparison to conventional processing routes
Berger, L.; Bär, F.; Jauer, Lucas; Schäublin, R.; Schleifenbaum, Johannes Henrich; Löffler, J.F.
Abstract
2018Microstructures, tensile properties, and fracture mechanisms of Inconel 718 formed by HDR-LMD with PREP and GA powders
Zhong, C.; Chen, J.; Gasser, A.; Sui, S.; Schleifenbaum, J.H.
Zeitschriftenaufsatz
2018Model-based analysis of highly dynamic laser beam shaping using deformable mirrors
Hofmann, O.; Pütsch, O.; Stollenwerk, J.; Loosen, P.
Zeitschriftenaufsatz, Konferenzbeitrag
2018Multi-physical analysis of thermo-optical effects for different Selective Laser Melting (SLM) scanning strategies
Bonhoff, T.; Poppe, M.; Stollenwerk, J.; Schleifenbaum, J.H.; Loosen, P.
Zeitschriftenaufsatz, Konferenzbeitrag
2018Multi-physical modeling of thermal and dispersive effects in optical systems for high power ultra-short laser pulses
Bonhoff, T.; Stollenwerk, J.; Loosen, P.
Konferenzbeitrag
2018Nanospectroscopy of infrared phonon resonance enables local quantification of electronic properties in doped SrTiO3 ceramics
Lewin, M.; Bäumer, C.; Gunkel, F.; Schwedt, A.; Gaussmann, F.; Wueppen, J.; Meuffels, P.; Jungbluth, B.; Mayer, J.; Dittmann, R.; Waser, R.; Taubner, T.
Zeitschriftenaufsatz
2018Next generation urban mining - laser-based sensing and sorting of electronic scrap
Connemann, S.; Ambrosch, R.; Bergmann, K.; Britten, S.; Brumm, H.; Eschen, M.; Fricke-Begemann, C.; Gehlen, C.; Kurylak, W.; Noll, R.; Sellin, G.; Siguier, M.; Tori, A.; Verglia, F.
Konferenzbeitrag
2018On a model for laser cutting involving surface tension
Vossen, G.; Friedlich, N.A.; Hermanns, T.; Nießen, M.; Schulz, W.
Zeitschriftenaufsatz, Konferenzbeitrag
2018On the correlation of the shielding gas flow in L-PBF machines with part density
Schniedenharn, M.; Schleifenbaum, J.H.
Konferenzbeitrag
2018Optimized vascular network by stereolithography for tissue engineered skin
Han, Xiaoxiao; Courseaus, Julian; Khamassi, Jamel; Nottrodt, Nadine; Engelhardt, Sascha; Jacobsen, Frank; Bierwisch, Claas; Meyer, Wolfdietrich; Walter, Torsten; Weisser, Jürgen; Jaeger, Raimund; Bibb, R.; Harris, Russel
Zeitschriftenaufsatz
2018Optischer Scanner
Bochvarov, Lazar; Lenenbach, Achim; Meineke, Georg; Tulea, Cristian
Patent
2018Oxide dispersion-strengthened alloys generated by laser metal deposition of laser-generated nanoparticle-metal powder composites
Doñate-Buendía, C.; Frömel, F.; Wilms, M.B.; Streubel, R.; Tenkamp, J.; Hupfeld, T.; Nachev, M.; Gökce, E.; Weisheit, A.; Barcikowski, S.; Walther, F.; Schleifenbaum, J.H.; Gökce, B.
Zeitschriftenaufsatz
2018Polygon scanning system for high-power, high-speed microstructuring
Straeten, K. van der; Nottrodt, O.; Zuric, M.; Olowinksy, A.; Abels, P.; Gillner, A.
Zeitschriftenaufsatz, Konferenzbeitrag
2018Porous Nickel Nano‐Foam by Femtosecond Laser Structuring for Supercapacitor Application
Lange, K.; Hördemann, C.; Schulz-Ruhtenberg, M.; Caro, J.
Zeitschriftenaufsatz
2018Position-dependent part quality of the L-PBF process resulting from the laser's angle of incidence
Schniedenharn, M.; Schleifenbaum, J.H.
Konferenzbeitrag
2018Probing the potential of structured and surface functionalized tools for dry cold forging of aluminium
Teller, M.; Ross, I.; Prünte, S.; Temmler, A.; Küpper, M.; Poprawe, R.; Schneider, J.M.; Hirt, G.
Konferenzbeitrag
2018Process Chain for Additive Manufacturing of Magnesium Implants
Jauer, Lucas; Kimm, Martin; Labude, N.; Neuß, S.; Lethaus, B.; D'Elia, F.; Müther, M.; Kopp, A.; Ptock, C.; Schleifenbaum, Johannes Henrich
Abstract
2018Qualitätsüberwachung von laserstrahlgeschweißten Tapes aus faserverstärkten Kunststoffen mittels Thermografie
Lanfermann, A.; Abels, P.; Gomer, A.; Schomburg, W.K.
Zeitschriftenaufsatz
2018Quality improvement of the surface of laser micro welds by using a dual beam setup
Haeusler, A.; Hollatz, S.; Olowinsky, A.; Gillner, A.; Poprawe, R.
Zeitschriftenaufsatz
2018Quantitative study of melt flow dynamics inside laser cutting kerfs by in-situ high-speed video-diagnostics
Arntz, D.; Petring, D.; Stoyanov, S.; Quiring, N.; Poprawe, R.
Zeitschriftenaufsatz, Konferenzbeitrag
2018Selective laser melting of rare earth element Sc modified aluminum alloy: Thermodynamics of precipitation behavior and its influence on mechanical properties
Zhang, H.; Gu, D.; Yang, J.; Dai, D.; Zhao, T.; Hong, C.; Gasser, A.; Poprawe, R.
Zeitschriftenaufsatz
2018Simulation of the dynamics of heat accumulation during in-volume modification with ultrashort laser pulses
Nippgen, S.; Gillner, A.; Smolenko, A.
Zeitschriftenaufsatz, Konferenzbeitrag
2018Solving the Monge-Ampère equation on triangle-meshes for use in optical freeform design
Wester, R.; Völl, A.; Berens, M.; Stollenwerk, J.; Loosen, P.
Konferenzbeitrag
2018Strukturierungsverfahren
Fader, Robert; Lorenz, Jürgen; Rommel, Mathias; Baum, Mario; Danylyuk, Serhiy; Gillner, Arnold; Stollenwerk, Jochen; Bläsi, Benedikt
Aufsatz in Buch
2018Tailored irradiation by VCSEL for controlled thermal states in thermoplastic tape placement
Weiler, T.; Striet, P.; Völl, A.; Stollenwerk, J.; Janssen, H.; Emonts, M.
Konferenzbeitrag
2018Temperature field and residual stress distribution for laser metal deposition
Pirch, N.; Niessen, M.; Linnenbrink, S.; Schopphoven, T.; Gasser, A.; Poprawe, R.; Schöler, C.; Arntz, D.; Schulz, W.
Zeitschriftenaufsatz
2018Ultra-fast laser micro processing by multiple laser spots
Bruening, S.; Du, K.; Jarczynski, M.; Jenke, G.; Gillner, A.
Zeitschriftenaufsatz, Konferenzbeitrag
2018Ultrafast dynamics of material excitation of dielectrics with ultrashort pulsed Bessel beams
Kalupka, C.; Holtum, T.; Reininghaus, M.
Konferenzbeitrag
2018Ultrafast laser helical drilling of three-dimensional shaped holes using synchronized adaption of energy deposition
He, C.; Buehring, J.; Zibner, J.; Gillner, A.
Zeitschriftenaufsatz
2018Ultrashort pulse processing of transparent ceramics: The role of electronic and thermal damage mechanisms
Kalupka C.; Schmalstieg, M.; Reininghaus, M.
Zeitschriftenaufsatz
2018Untersuchung und Vergleich verschiedener berührender und berührungsloser Methoden zur Schwingungsanregung bei der akustischen Resonanzanalyse
Gipperich, Marius; Heinrich, Matthias; Rabe, Ute; Westphalen, Thomas; Nyga, Sebastian
Konferenzbeitrag
2018Verbesserung der Oberflächenqualität von SLM-Bauteilen durch Pulverentfernung im Prozess
Bürger, Laura; Kropp, Ralph; Risse, Jeroen
Patent
2018Visualization of the shielding gas flow in SLM machines by space-resolved thermal anemometry
Schniedenharn, M.; Wiedemann, F.; Schleifenbaum, J.H.
Zeitschriftenaufsatz
2018Zweistufiges Laserstrahlbeschichten für Funktions- und Verschleißschutzschichten
Maischner, D.; Ross, I.; Weisheit, A.; Deschuyteneer, D.; Petit, F.; Schleifenbaum, J.H.
Zeitschriftenaufsatz