| | |
|---|
| 2021 | 3D relative dose measurement with a µm thin dosimetric layer
Schuster, Christiane; Kuntz, Florent; Strasser, Alain; Härtling, Thomas; Dornich, Kay; Richter, Daniel | Zeitschriftenaufsatz |
| 2021 | Anwendung eines technischen Platinelektrolyten für die katalytisch aktive Nanopartikel- und Metallschichtabscheidung
Weiser, Mathias
: Michaelis, Alexander | Dissertation |
| 2021 | Biaxial flexural strength of zirconia: A round robin test with 12 laboratories
Spintzyk, Sebastian; Geis-Gerstorfer, Jürgen; Bourauel, Christoph; Keilig, Ludger; Lohbauer, Ulrich; Brune, Annike; Greuling, Andreas; Arnold, Christin; Rues, Stefan; Adjiski, Ranko; Sawada, Tomofumi; Lümkemann, Nina; Stawarczyk, Bogna; Ilie, Nicoleta; Frankenberger, Roland; Dudek, Marie-Christine; Strickstrock, Monika; Begand, Sabine | Zeitschriftenaufsatz |
| 2021 | Determination of the filler distribution in an epoxy molding compound using high-resolution X-ray computed tomography
Topal, Emre; Gluch, Jürgen; Clausner, André; Cardoso, Andre; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2021 | Estimation of the Filling Distribution and Height Levels Inside an Insulated Pressure Vessel by Guided Elastic Wave Attenuation Tomography
Neubeck, Robert; Stephan, Mareike; Gaul, Tobias; Weihnacht, Bianca; Schubert, Lars; Bindingsbø, Arne Ulrik; Østvik, Jan-Magnus | Zeitschriftenaufsatz |
| 2021 | Evaluation of indium tin oxide for gas sensing applications: Adsorption/desorption and electrical conductivity studies on powders and thick films
Dietrich, Stefan; Kusnezoff, Mihails; Petasch, Uwe; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2021 | Facile deposition of multiwalled carbon nanotubes via electrophoretic deposition in an environmentally friendly suspension
Schneider, Michael; Weiser, Mathias; Ferl, Sandra; Krasmann, Christian; Potthoff, Annegret; Voigt, Karsten; Malcher, Peter | Zeitschriftenaufsatz |
| 2021 | Formation Mechanism of Electrodeposited Sb/Sb2O3 Micro-Composites
Voigt, Karsten; Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2021 | Functionalized silicon substrates with stripe-patterned surface-near electrostatic forces for the self-organized, stable immobilization of biomolecules
Blaschke, Daniel; Pahlow, Susanne; Fremberg, Tino; Weber, Karina; Müller, Anne Dorothea; Kurz, Susanne; Spohn, Juliane; Dhandapani, Vignesh; Rebohle, Lars; Skorupa, Ilona; Schmidt, Heidemarie | Zeitschriftenaufsatz |
| 2021 | How does grazing incidence ultrasonic microscopy work? A study based on grain-scale numerical simulations
Kalkowski, Michal; Lowe, Michael J.S.; Barth, Martin; Rjelka, Marek; Köhler, Bernd | Zeitschriftenaufsatz |
| 2021 | Hydrophobic ceramic membranes in MD processes - Impact of material selection and layer characteristics
Schnittger, Johann; McCutcheon, Jeffrey R.; Hoyer, Thomas; Weyd, Marcus; Fischer, Gundula; Puhlfürß, Petra; Halisch, Matthias; Voigt, Ingolf; Lerch, André | Zeitschriftenaufsatz |
| 2021 | In-plane heatwave thermography as digital inspection technique for fasteners in aircraft fuselage panels
Stamm, Michael; Krüger, Peter; Pfeiffer, Helge; Köhler, Bernd; Reynaert, Johan; Wevers, Martine | Zeitschriftenaufsatz |
| 2021 | Industrial application of ceramic nanofiltration membranes for water treatment in oil sands mines
Motta Cabrera, Sandra; Winnubst, Louis; Richter, Hannes; Voigt, Ingolf; Nijmeijer, Arian | Zeitschriftenaufsatz |
| 2021 | Influence of Simultaneous Cr2O3 and TiO2 Additions on the Microstructure and Properties of APS Alumina Coatings
Conze, Susan; Grimm, Maximilian; Berger, Lutz-Michael; Thiele, Sven; Drehmann, Rico; Lampke, Thomas | Zeitschriftenaufsatz |
| 2021 | Microstructure and fracture mechanism investigation of porous silicon nitride-zirconia-graphene composite using multi-scale and in-situ microscopy
Liao, Zhongquan; Standke, Yvonne; Gluch, Jürgen; Balazsi, Katalin; Pathak, Onkar; Höhn, Sören; Herrmann, Mathias; Werner, Stephan; Dusza, Jan; Balazsi, Csaba; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2021 | Ni-Cu-Zn ferrites with high Curie temperature for multilayer inductors with increased operating temperatures
Reimann, Timmy; Capraro, Beate; Bartsch, Heike; Töpfer, Jörg | Zeitschriftenaufsatz |
| 2021 | Piezoresistive characteristics of MOSFET channels determined with indentation
Schlipf, Simon; Clausner, André; Paul, Jens; Capecchi, Simone; Wambera, Laura; Meier, Karsten; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2021 | Processing of large and complex-shaped fine-grained alumina bodies with high transparency
Trunec, Martin; Kastyl, Jaroslav; Stastny, Premsyl; Hildebrandt, Stefanie | Zeitschriftenaufsatz |
| 2021 | Production and properties of high entropy carbide based hardmetals
Pötschke, Johannes; Dahal, Manisha; Vornberger, Anne; Herrmann, Mathias; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2021 | Recent Insights into Rate Performance Limitations of Li-ion Batteries
Heubner, Christian; Nikolowski, Kristian; Reuber, Sebastian; Schneider, Michael; Wolter, Mareike; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2021 | Untersuchungen zum Electrochemical Machining von Wolframcarbid-Cobalt
Schubert, Nora
: Michaelis, Alexander | Dissertation |
| 2021 | Volume crystallization and microwave dielectric properties of indialite/cordierite glass by TiO2 addition
Ohsato, Hitoshi; Varghese, Jobin; Kan, Akinori; Kim, Jeong Seog; Kagomiya, Isao; Ogawa, Hirotaka; Sebastian, Mailadil Thomas; Jantunen, Heli | Zeitschriftenaufsatz |
| 2021 | Work function performance of a C12A7 electride surface exposed to low pressure low temperature hydrogen plasmas
Heiler, Adrian; Wätzig, Katja; Tajmar, Martin; Friedl, Roland; Nocentini, Riccardo; Fantz, Ursel | Zeitschriftenaufsatz |
| 2020 | 3D HR-EBSD Characterization of the plastic zone around crack tips in tungsten single crystals at the micron scale
Kalácska, Szilvia; Ast, Johannes; Ispánovity, Péter Dusán; Michler, Johann; Maeder, Xavier | Zeitschriftenaufsatz |
| 2020 | 3D-gedruckte Keramikteile für Luft- und Raumfahrtanwendungen
Abel, Johannes; Tiwari, Siddharth; Lafont, Ugo | Zeitschriftenaufsatz |
| 2020 | Acoustic Resonance Recognition of Coins
Kraljevski, Ivan; Duckhorn, Frank; Ju, Yong Chul; Tschöpe, Constanze; Richter, Christian; Wolff, Matthias | Konferenzbeitrag |
| 2020 | Acoustic resonance testing of glass IV bottles
Kraljevski, Ivan; Duckhorn, Frank; Ju, Yong Chul; Tschöpe, Constanze; Wolff, Matthias | Konferenzbeitrag |
| 2020 | All-silicon polarized light source based on electrically excited whispering gallery modes in inversely tapered photonic resonators
Schmitt, Sebastian; Schwarzburg, Klaus; Sarau, George; Christiansen, Silke; Wiesner, Sven; Dubourdieu, Catherine | Zeitschriftenaufsatz |
| 2020 | Analyse von Schwindungsfeldern bei planaren LTCC-Substraten und deren Berücksichtigung im Entwurf von mikrosystemtechnischen Komponenten
Lenz, Christian
: Michaelis, Alexander | Dissertation |
| 2020 | Anisotropy of Mechanical Properties of Pinctada margaritifera Mollusk Shell
Strag, Martyna; Maj, Åukasz; Bieda, Magdalena; Petrzak, PaweÅ; Jarzebska, Anna; Gluch, Jürgen; Topal, Emre; Kutukova, Kristina; Clausner, André; Heyn, Wieland; Berent, Katarzyna; Nalepka, Kinga; Zschech, Ehrenfried; Checa, Antonio G.; Sztwiertnia, Srzysztof | Zeitschriftenaufsatz |
| 2020 | Application of composite coatings as protection/contacting layers for metallic high-chromium-content SOFC interconnect material
Sauchuk, Viktar; Trofimenko, Nikolai; Megel, Stefan; Rothe, Stefan; Schilm, Jochen; Andritschky, Martin; Hiller, Michael; Goebel, Claudia; Froitzheim, Jan; Kusnezoff, Mihails | Konferenzbeitrag |
| 2020 | Application-Oriented Modeling and Optimization of Tailored Li-Ion Batteries Using the Concept of Diffusion Limited C-rate
Heubner, Christian; Reuber, Sebastian; Seeba, Jann; Marcinkowski, Peter; Nikolowski, Kristian; Schneider, Michael; Wolter, Mareike; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Beschichtung für implantierbare medizinische Geräte, Verfahren zu deren Herstellung sowie implantierbares medizinisches Gerät
Balakin, Sascha; Opitz, Jörg | Patent |
| 2020 | Biospeckle-characterization of hairy root cultures using laser speckle photometry
Schott, Carolin; Steingroewer, Juliane; Bley, Thomas; Cikalova, Ulana; Bendjus, Beatrice | Zeitschriftenaufsatz |
| 2020 | Breakthrough Screening of Porous Materials: A Simple and Effective Tool for Database Generation
Piscopo, Calogero Giancarlo; Polyzoidis, Angelos; Werner, David; Ahlhelm, Matthias; Richter, Hans-Jürgen | Zeitschriftenaufsatz |
| 2020 | CerAMfacturing of Si3N4 components
Scheithauer, Uwe; Abel, Johannes; Schwarzer, Eric; Weingarten, Steven; Kunz, Willy; Moritz, Tassilo; Klemm, Hagen | Zeitschriftenaufsatz |
| 2020 | Ceramic injection moulding: Developments in production technology, materials and applications
Moritz, Tassilo | Zeitschriftenaufsatz |
| 2020 | Ceramic microhotplates for low power metal oxide gas sensors
Samotaev, Nikolay; Oblov, Konstantin; Gorshkova, Anastasiya; Fritsch, Marco; Mosch, Sindy; Vinnichenko, Mykola; Trofimenko, Nikolai; Kusnezoff, Mihails; Fuchs, Franz-Marin; Wissmeier, Lena | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2020 | Ceramic-like composite systems for winding insulation of electrical machines
Miersch, Sören; Schubert, Ralph; Schuhman, Thomas; Schuffenhauer, Uwe; Buddenbohm, Markus; Beyreuther, Markus; Kuhn, Jeannette; Lindner, Mathias; Cebulski, Bernd; Jung, Jakob | Konferenzbeitrag |
| 2020 | Changes in the coating composition due to APS process conditions for Al2O3-Cr2O3-TiO2 ternary powder blends
Grimm, Maximilian; Conze, Susan; Berger, Lutz-Michael; Paczkowski, Gerd; Drehmann, Rico; Lampke, Thomas | Zeitschriftenaufsatz |
| 2020 | Characterization of a silicon nitride ceramic material for ceramic springs
Khader, I.; Koplin, C.; Schröder, C.; Stockmann, Jens; Beckert, Wieland; Kunz, Willy; Kailer, A. | Zeitschriftenaufsatz |
| 2020 | Characterization of Ceramics based on Laser Speckle Photometry
Chen, Lili; Cikalova, Ulana; Münch, Stefan; Bendjus, Beatrice; Röllig, Mike | Zeitschriftenaufsatz |
| 2020 | Chemoadsorption for separation of Hydrogen Sulfide from biogas with iron hydroxide and sulfur recovery
Lincke, Marc; Petasch, Uwe; Gaitzsch, Uwe; Tillmann, Andreas; Tietze, Michael; Niebling, Falko | Zeitschriftenaufsatz |
| 2020 | Chronoamperometry as an electrochemical in situ approach to investigate the electrolyte wetting process of lithium-ion cells
Peter, Christian; Nikolowski, Kristian; Reuber, Sebastian; Wolter, Mareike; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Circuit-Board-Integrated transformers design and manufacture
Matz, Richard; Rabe, Torsten; Töpfer, Jörg; Ziesche, Steffen | Zeitschriftenaufsatz |
| 2020 | Complementary EIS/FTIR study of the degradation of adhesives in electronic packaging
Schneider, Michael; Gierth, Uta; Simunkova, Lenka; Gierth, Paul; Rebenklau, Lars | Zeitschriftenaufsatz |
| 2020 | Confined growth of porous nitrogen-doped cobalt oxide nanoarrays as bifunctional oxygen electrocatalysts for rechargeable zinc-air batteries
Wang, Xia; Liao, Zhongquan; Fu, Yubin; Neumann, Christof; Turchanin, Andrey A.; Nam, Gyutae; Zschech, Ehrenfried; Cho, Jaephil; Zhang, Jian; Feng, Xinliang | Zeitschriftenaufsatz |
| 2020 | Contacting Methods for C12A7 Electride Ceramic
Wätzig, Katja; Rost, Axel; Schilm, Jochen; Tajmar, M.; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Convolutional Autoencoders for Health Indicators Extraction in Piezoelectric Sensors
Kraljevski, Ivan; Duckhorn, Frank; Tschöpe, Constanze; Wolff, Matthias | Konferenzbeitrag |
| 2020 | Correction to: Magnetic Characterization of Ferromagnetic Shape Memory Components Under Defined Mechanical Loading (Shape Memory and Superelasticity, (2020), 10.1007/s40830-020-00266-2)
Ehle, F.; Neumeister, P.; Haufe, E.; Neubert, H. | Zeitschriftenaufsatz |
| 2020 | Correlative microscopy and spectroscopy workflow for microplastics
Sarau, George; Kling, Lasse; Oßmann, Barbara; Unger, Ann-Katrin; Vogler, Frank; Christiansen, Silke | Zeitschriftenaufsatz |
| 2020 | Crack identification in BEoL stacks using acoustic emission testing and nano x-ray computed tomography
Silomon, Jendrik; Gluch, Jürgen; Clausner, André; Paul, Jens; Zschech, Ehrenfried | Konferenzbeitrag |
| 2020 | Crack-healing in ytterbium silicate filled with silicon carbide particles
Kunz, Willy; Klemm, Hagen; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Creation of modified Cr3C2-NiCr hardmetal coating microstructures through novel processing
Matthews, Steven; Bhagvandas, Meetal; Berger, Lutz-Michael | Zeitschriftenaufsatz |
| 2020 | Critical assessment of analytical methods for the harmonized and cost-efficient analysis of microplastics
Primpke, Sebastian; Christiansen, Silke; Cowger, Win; DeFrond, Hannah; Deshpande, Ashok D.; Fischer, Marten; Holland, Erika; Meyns, Michaela; O'Donnell, Bridget; Oßmann, Barbara; Pittroff, Marco; Sarau, George; Scholz-Böttcher, Barbara; Wiggin, Kara | Zeitschriftenaufsatz |
| 2020 | Critical review of processing and classification techniques for images and spectra in microplastic research
Cowger, Win; Gray, Andrew; Christiansen, Silke; DeFrond, Hannah; Deshpande, Ashok D.; Hemabessiere, Ludovic; Lee, Eunah; Mill, Leonid; Munno, Keenan; Oßmann, Barbara; Pittroff, Marco; Rochman, Chelsea; Sarau, George; Tarby, Shannon; Primpke, Sebastian | Zeitschriftenaufsatz |
| 2020 | Deep learning-based inaccuracy compensation in reconstruction of high resolution XCT data
Topal, Emre; Löffler, Markus; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2020 | Degradation analysis of CFY-stacks MK35x - a guide for exact measurement
Megel, Stefan; Rothe, Stefan; Schöne, Jakob; Sauchuk, Viktar; Trofimenko, Nikolai; Schilm, Jochen; Kusnezoff, Mihails | Konferenzbeitrag |
| 2020 | Delayed formation of thermally grown oxide in environmental barrier coatings for non-oxide ceramic matrix composites
Klemm, Hagen; Schönfeld, Katrin; Kunz, Willy | Zeitschriftenaufsatz |
| 2020 | Detailed insight into processes of reversible solid oxide cells and stacks using DRT analysis
Subotić, Vanja; Königshofer, Benjamin; Juričić, Đani; Kusnezoff, Mihails; Schroettner, Hartmuth; Hochenauer, Christoph; Boškoski, Pavle | Zeitschriftenaufsatz |
| 2020 | Determination of bulk residual stresses in superhard diamond-SiC materials
Matthey, Björn; Pirling, Thilo; Herrmann, Mathias; Schreiber, Jürgen | Zeitschriftenaufsatz |
| 2020 | Determination of the entire stent surface area by a new analytical method
Saqib, Muhammad; Bernhardt, Ricardo; Kästner, Markus; Beshchasna, Natalia; Cuniberti, Gianaurelio; Opitz, Jörg | Zeitschriftenaufsatz |
| 2020 | Development of a mass flow sensor based on Low Temperature Cofired Ceramics for analysis of exhaust gas up to 500 °C
Lohrberg, Carolin; Lenz, Christian; Kreher, Lisa; Bechtold, Franz; Carstens, Stefan; Springer, Gert; Ziesche, Steffen | Konferenzbeitrag |
| 2020 | Diepoxides and bisphosphonates as potential candidates for anti-calcification treatment of aortic heart valve bioprostheses
Maciejewska, Agnieszka; Ritter, Jan; Kiesendahl, Nicole; Zhuravleva, Irina Yu; Timchenko, Tatyana P; Bogachev-Prokophiev, Alexander V.; Menne, Matthias; Beshchasna, Natalia; Opitz, Jörg; Steinseifer, Ulrich | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2020 | Differential volumetric analysis combined with monitoring of differential ultra-sound travel time, an approach for tracing fine-structural compression behaviour of solids
Mirwald, Peter W.; Paulini, Peter; Hutzler, Thomas | Zeitschriftenaufsatz |
| 2020 | Diffusion-limited C-rate: A fundamental principle quantifying the intrinsic limits of Li-Ion batteries
Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Direct measurements of Rayleigh wave acoustoelastic constants for shot-peened superalloys
Gartsev, Sergey; Köhler, Bernd | Zeitschriftenaufsatz |
| 2020 | The E.T.PACK Project: Towards a fully passive and consumable-less deorbit kit based on low-work-function tether technology
Sanchez-Arriaga, Gonzalo; Naghdi, Samira; Wätzig, Katja; Schilm, Jochen; Lorenzini, Enrico C.; Tajmar, Martin; Urgoiti, Eduardo; Tarabini Castellani, Lorenzo; Plaza, J.F.; Post, A. | Zeitschriftenaufsatz |
| 2020 | Electrochemical Alkali-Ion Exchange in Electrode Materials for Secondary Batteries
Lein, Tobias; Heubner, Christian; Matthey, Björn; Schneider, Michael; Michaelis, Alexander | Poster |
| 2020 | Electrochemical corrosion resistance of Ni and Co bonded near-nano and nanostructured cemented carbides
Fabijanić, Tamara Aleksandrov; Kurtela, Marin; Škrinjarić, Irbas; Pötschke, Johannes; Mayer, Markus | Zeitschriftenaufsatz |
| 2020 | Electrochemical single-particle measurements of electrode materials for Li-ion batteries: Possibilities, insights and implications for future development
Heubner, Christian; Langklotz, Ulrike; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Electrodeposition of Versatile Nanostructured Sb/Sb2O3 Microcomposites
Voigt, Karsten; Heubner, Christian; Liebmann, Tobias; Matthey, Björn; Weiser, Mathias; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Engineering of Surfaces by the Use of Detonation Nanodiamonds. Towards Drug-eluting Coatings of Biomaterials
Balakin, Sascha
: Cuniberti, Gianaurelio (Gutachter); Wiesmann, Hans-Peter (Gutachter); Yeo, Jong-Souk (Gutachter) | Dissertation |
| 2020 | Enhanced KLM model for single-fibre piezocomposite transducers
Angerer, Martin; Zapf, Michael; Gebhardt, Sylvia; Neubert, Holger; Ruiter, Nicole V. | Konferenzbeitrag |
| 2020 | Epitaktische BaTiO3-basierte Schichten für elektrokalorische Untersuchungen
Engelhardt, Stefan
: Nielsch, Kornelius (Gutachter); Dörr, Kathrin (Gutachter); Michaelis, Alexander (Gutachter) | Dissertation |
| 2020 | Erforschung eines Algorithmus sowie Messsystems zur kamerabasierten Detektion und Klassifikation von lokalen Störungen spiegelnd lackierter Oberflächen
Kieselbach, Kim Katharina
: Heuer, Henning (Betreuer); Janschek, Klaus (Gutachter); Tutsch, Rainer (Gutachter); Oppermann, Martin (weiteres Mitglied) | Dissertation |
| 2020 | Experimental and numerical analysis of the complex permittivity of open-cell ceramic foams
Camacho Hernandez, Jesus Nain; Link, Guido; Soldatov, Sergey; Füssel, Alexander; Schubert, Markus; Hampel, Uwe | Zeitschriftenaufsatz |
| 2020 | Extrusion-based fabrication of electrodes for high-energy Li-ion batteries
Seeba, Jann; Reuber, Sebastian; Heubner, Christian; Müller-Köhn, Axel; Wolter, Mareike; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Facile fabrication of nanostructured alumina membranes
Voigt, Karsten; Heubner, Christian; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | FEM-study for solder model comparison on solder joints stress-strain effects
Schwerz, Robert; Metasch, René; Röllig, Mike; Meier, Karsten | Konferenzbeitrag |
| 2020 | Field-structured magnetic elastomers based on thermoplastic polyurethane for fused filament fabrication
Dohmen, Eike; Saloum, Alexander; Abel, Johannes | Zeitschriftenaufsatz |
| 2020 | Formation and crystallographic orientation of NiSi2-Si interfaces
Fuchs, Florian; Bilal Khan, Muhammad; Deb, Dipjyoti; Pohl, Darius; Schuster, Jörg; Weber, Walter M.; Mühle, Uwe; Löffler, Markus; Georgiev, Yordan M.; Erbe, Artur; Gemming, Sibylle | Zeitschriftenaufsatz |
| 2020 | Fraunhofer Institute for Ceramic Technologies and Systems IKTS. Annual Report 2019/2020
| Jahresbericht |
| 2020 | Fraunhofer-Institut für Keramische Technologien und Systeme. Jahresbericht 2019/2020
| Jahresbericht |
| 2020 | An FT-IRRAS-study of anodic oxide films on aluminum alloys and the impact of bath aging
Schneider, Michael; Gierth, Uta; Kremmer, Kerstin | Zeitschriftenaufsatz |
| 2020 | Ga-, Y-, and Sc-substituted M-type ferrites for self-biasing circulators in LTCC microwave modules
Heidenreich, Manuel; Ma, Xinyi; Gitzel, Wanja; Jacob, Arne; Capraro, Beate; Töpfer, Jörg | Zeitschriftenaufsatz |
| 2020 | GITT Analysis of Lithium Insertion Cathodes for Determining the Lithium Diffusion Coefficient at Low Temperature: Challenges and Pitfalls
Nickol, Alexander; Schied, Thomas; Heubner, Christian; Schneider, Michael; Michaelis, Alexander; Bobeth, Manfred; Cuniberti, Gianaurelio | Zeitschriftenaufsatz |
| 2020 | Grain-size effects on multi-wire slurry sawing of translucent alumina ceramics
Schmidtner, Lea; Herrmann, Mathias; Aneziris, Christos G. | Zeitschriftenaufsatz |
| 2020 | Graphene added multilayer ceramic sandwich (GMCS) composites: Structure, preparation and properties
Balazsi, Katalin; Furko, Monika; Liao, Zhongquan; Fogarassy, Zsolt; Medved, David; Zschech, Ehrenfried; Dusza, Jan; Balazsi, Csaba | Zeitschriftenaufsatz |
| 2020 | Grüner Wasserstoff in der Rohstahlerzeugung
Herz, Gregor; Müller, Nils; Adam, Paul; Megel, Stefan; Reichelt, Erik; Jahn, Matthias | Zeitschriftenaufsatz |
| 2020 | High temperature Co-electrolysis as a key technology for CO2 emission mitigation - A model-based assessment of CDA and CCU
Herz, Gregor; Müller, Nils; Adam, Paul; Megel, Stefan; Reichelt, Erik; Jahn, Matthias | Zeitschriftenaufsatz |
| 2020 | High Temperature Packaging for Sensor Elements
Rebenklau, Lars; Gierth, Paul; Barth, Henry | Konferenzbeitrag |
| 2020 | High-Rate laser surface texturing for advanced tribological functionality
Schille, Jörg; Schneider, Lutz; Mauersberger, Stefan; Szokup, Sylvia; Höhn, Sören; Pötschke, Johannes; Reiß, Friedemann; Leidich, Erhard; Löschner, Udo | Zeitschriftenaufsatz |
| 2020 | High-velocity water vapor corrosion of Yb-silicate: Sprayed vs. sintered body
Bakan, Emine; Kindelmann, Moritz; Kunz, Willy; Klemm, Hagen; Vaßen, Robert | Zeitschriftenaufsatz |
| 2020 | Hochtemperaturversiegelung für thermisch gespritzte Schichten
Hildebrandt, Stefanie; Berger, Lutz-Michael | Zeitschriftenaufsatz |
| 2020 | Hydrogel-based chemical and biochemical sensors
Gerlach, Gerald; Günther, Margarita; Härtling, Thomas | Zeitschriftenaufsatz |
| 2020 | Hydrophobic, carbon free gas diffusion electrode for alkaline applications
Bekisch, Artur; Skadell, Karl; Poppitz, David; Schulz, Matthias; Weidl, Roland; Stelter, Michael | Zeitschriftenaufsatz |
| 2020 | Impact of precrystallized NaYSi4O12 powders in the synthesis of sodium conducting solid electrolytes
Wagner, Dörte; Schilm, Jochen; Lee, Chang Woo; Kusnezoff, Mihails | Zeitschriftenaufsatz |
| 2020 | In situ preparation of crosslinked polymer electrolytes for lithium ion batteries: A comparison of monomer systems
Röchow, Eike Thomas; Coeler, Matthias; Pospiech, Doris; Kobsch, Oliver; Mechtaeva, Elizaveta; Vogel, Roland; Voit, Brigitte; Nikolowski, Kristian; Wolter, Mareike | Zeitschriftenaufsatz |
| 2020 | In vitro characterization of osteoblast cells on polyelectrolyte multilayers containing detonation nanodiamonds
Balakin, Sascha; Yun, Young-Shik; Lee, Jihye; Kang, Eun-Hye; Spohn, Juliane; Yun, In-Sik; Opitz, Jörg; Cuniberti, Gianaurelio; Yeo, Jong-Souk | Zeitschriftenaufsatz |
| 2020 | In-operando monitoring and lifetime improvement of SOFCs on single-cell and stack level
Subotić, Vanja; Kusnezoff, Mihails; Pofahl, Stefan; Lawlor, Vincent; Königshofer, Benjamin; Napporn, Teko W.; Megel, Stefan; Hochenauer, Christoph | Konferenzbeitrag |
| 2020 | Influence of cemented carbide composition on cutting temperatures and corresponding hot hardnesses
Vornberger, Anne; Picker, Tobias; Pötschke, Johannes; Herrmann, Mathias; Denkena, Berend; Krödel, Alexander; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Influence of microstructure on hardness and thermal conductivity of hardmetals
Vornberger, Anne; Pötschke, Johannes; Gestrich, Tim; Herrmann, Mathias; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Influence of surface characteristics on the penetration rate of electrolytes into model cells for lithium ion batteries
Beyer, Sebastian; Kobsch, Oliver; Pospiech, Doris; Simon, Frank; Peter, Christian; Nikolowski, Kristian; Wolter, Mareike; Voit, Brigitte | Zeitschriftenaufsatz |
| 2020 | Influence of the brazing paste composition on the wetting behavior of reactive air brazed metal-ceramic joints
Wätzig, Katja; Schilm, Jochen; Mosch, Sindy; Tillmann, Wolfgang; Eilers, Arne; Wojarski, Lukas | Zeitschriftenaufsatz |
| 2020 | Influence of tool material properties on the wear behavior of cemented carbide tools with rounded cutting edges
Denkena, Berend; Michaelis, Alexander; Herrmann, Mathias; Pötschke, Johannes; Krödel, Alexander; Vornberger, Anne; Picker, Tobias | Zeitschriftenaufsatz |
| 2020 | Infrared transparent ceramic windows 2 for high-speed vehicles
Ragulya, Andrey; Kolesnichenko, Valeriy; Herrmann, Mathias | Konferenzbeitrag |
| 2020 | Insights into the electrochemical Li/Na-exchange in layered LiCoO2 cathode material
Heubner, Christian; Matthey, Björn; Lein, Tobias; Wolke, Florian; Liebmann, Tobias; Lämmel, Christoph; Schneider, Michael; Herrmann, Mathias; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Intercalation materials for secondary batteries based on alkali metal exchange: Developments and perspectives
Heubner, Christian; Lein, Tobias; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Investigation of the passive layer on a solid-state sintered silicon carbide ceramic formed in sulfuric acid
Schneider, Michael; Kremmer, Kerstin; Voigt, Markus; Grundmeier, Guido | Zeitschriftenaufsatz |
| 2020 | Investigations of internal stresses in high-voltage devices with deep trenches
Hieckmann, Ellen; Mühle, Uwe; Chekhonin, Paul; Zschech, Ehrenfried; Gambino, Jeff | Zeitschriftenaufsatz |
| 2020 | Das Konzept der Metallionen-Hybridbatterie am Beispiel ausgewählter Oxidsysteme
Maletti, Sebastian
: Michaelis, Alexander | Dissertation |
| 2020 | Korrosion und elektrochemisches Verhalten von siebgedruckten Metall-Keramik-Werkstoffverbunden
Junker, Nils
: Michaelis, Alexander (1. Gutachter); Feser, Ralf (2. Gutachter) | Dissertation |
| 2020 | Lightweight polymer-carbon composite current collector for lithium-ion batteries
Fritsch, Marco; Coeler, Matthias; Kunz, Karina; Krause, Beate; Marcinkowski, Peter; Pötschke, Petra; Wolter, Mareike; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Local mechanical properties at the dendrite scale of Ni-Based superalloys studied by advanced high temperature indentation creep and micropillar compression tests
Haußmann, Lukas; Neumeier, Steffen; Kolb, Markus; Ast, Johannes; Mohanty, Gaurav; Michler, Johann; Göken, Mathias | Konferenzbeitrag |
| 2020 | Low work-function tether Deorbit Kit
Tarabini-Castellani, Lorenzo; Ortega, Alberto; Gimenéz, Alvaro; Urgoiti, Eduardo; Sanchez-Arriaga, Gonzalo; Borderes-Motta, Gabriel; Lorenzini, Enrico C.; Tajmar, Martin; Wätzig, Katja; Post, Angel; Plaza, J.F. | Zeitschriftenaufsatz |
| 2020 | LTCC Embedding of SiC Power Devices for High Temperature Applications over 400 °C
Bayer, Benjamin; Groccia, Mario; Bach, Hoang Linh; Bayer, Christoph Friedrich; Schletz, Andreas; Lenz, Christian; Ziesche, Steffen | Konferenzbeitrag |
| 2020 | Magnetic characterization of ferromagnetic shape memory components under defined mechanical loading
Ehle, Fabian; Neumeister, Peter; Haufe, Eric; Neubert, Holger | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2020 | Material characterization of additively manufactured metals by laser speckle photometry
Dang, David; Elspaß, Arno; Cikalova, Ulana; Kleszczynski, Stefan; Bendjus, Beatrice; Witt, Gerd | Konferenzbeitrag |
| 2020 | Matrix techniques for Lamb-wave damage imaging in metal plates
Neubeck, Robert; Kexel, Christian; Moll, Jochen | Zeitschriftenaufsatz |
| 2020 | Mechanical and microstructural characterization of LTCC and HTCC ceramics for high temperature and harsh environment application
Naumann, Falk; Lorenz, Georg; Bernasch, Michael; Boettge, Bianca; Schischka, Jan; Ziesche, Steffen; Pernau, Hans-Fridtjof; Jaegle, Martin; Klengel, Sandy; Kappert, Holger | Konferenzbeitrag |
| 2020 | Mechanochemical versus chemical routes for graphitic precursors and their performance in micropollutants removal in water
Mahmoud, Alaa El Din; Franke, Marcus; Stelter, Michael; Bräutigam, Patrick | Zeitschriftenaufsatz |
| 2020 | Messung der Verbiegung der Knochenplatte
Neubert, Holger | Aufsatz in Buch |
| 2020 | Methanol-to-Olefins in a membrane reactor with in situ steam removal - The decisive role of coking
Best, Felix; Mundstock, Alexander; Dräger, Gerald; Rusch, Pascal; Bigall, Nadja C.; Richter, Hannes; Caro, Jürgen | Zeitschriftenaufsatz |
| 2020 | Microstructural investigations in binderless tungsten carbide with grain growth inhibitors
Lay, Sabine; Antoni-Zdziobek, Annie; Pötschke, Johannes; Herrmann, Mathias | Zeitschriftenaufsatz |
| 2020 | Microstructure and interface characteristics of 17-4PH/YSZ components after Co-Sintering and hydrothermal corrosion
Günther, Anne; Moritz, Tassilo; Mühle, Uwe | Zeitschriftenaufsatz |
| 2020 | Microstructure and sliding wear resistance of plasma sprayed Al2O3-Cr2O3-TiO2 ternary coatings from blends of single oxides
Grimm, Maximilian; Conze, Susan; Berger, Lutz-Michael; Paczkowski, Gerd; Lindner, Thomas; Lampke, Thomas | Zeitschriftenaufsatz |
| 2020 | A mode-switchable guided elastic wave transducer
Köhler, Bernd; Kim, Jongtak; Chwelatiuk, Konrad; Tschöke, Kilian; Schubert, Frank; Schubert, Lars | Zeitschriftenaufsatz |
| 2020 | Modeling of a Novel Atmospheric SOFC/GT Hybrid Process and Comparison with State-of-the-Art SOFC System Concepts
Cardenas de la Cruz, Cesar Teodoro; Herz, Gregor; Reichelt, Erik; Jahn, Matthias | Zeitschriftenaufsatz |
| 2020 | Modification of titanium implants using biofunctional nanodiamonds for enhanced antimicrobial properties
Krok, Emilia; Balakin, Sascha; Jung, Jonas; Groß, Frank; Opitz, Jörg; Cuniberti, Gianaurelio | Zeitschriftenaufsatz |
| 2020 | Modifizierung der Faser-Matrix-Anbindung in keramischen Faserverbundwerkstoffen
Steinborn, Clemens
: Michaelis, Alexander (1. Gutachter); Krenkel, Walter (2. Gutachter) | Dissertation |
| 2020 | Multi-scale X-ray tomography and machine learning algorithms to study MoNi4 electrocatalysts anchored on MoO2 cuboids aligned on Ni foam
Topal, Emre; Liao, Zhongquan; Löffler, Markus; Gluch, Jürgen; Zhang, Jian; Feng, Xinliang; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2020 | Multi-wire sawing of translucent alumina ceramics
Schmidtner, Lea; Heinrich, Hannes; Fuchs, Marcel; Pötzsch, Anke; Janz, Stefan; Herrmann, Mathias; Aneziris, Christos G.; Kaden, Thomas | Zeitschriftenaufsatz |
| 2020 | Multilayer ferrite inductors for the use at high temperatures
Bartsch, Heike; Thiele, Sebastian; Müller, Jens; Schabbel, Dirk; Capraro, Beate; Reimann, Timmy; Grund, Steffen; Töpfer, Jörg | Zeitschriftenaufsatz |
| 2020 | Musical pitch quantization as an eigenvalue problem
Graben, Peter beim; Mannone, Maria | Zeitschriftenaufsatz |
| 2020 | Nanoindentation to investigate IC stability using ring oscillator circuits as a CPI sensor
Schlipf, Simon; Clausner, André; Paul, Jens; Capecchi, Simone; Wambera, Laura; Meier, Karsten; Zschech, Ehrenfried | Konferenzbeitrag |
| 2020 | Novel micro-scale specimens for mode-dependent fracture testing of brittle materials: A case study on GaAs single crystals
Ast, Johannes; Schwiedrzik, Jakob; Rohbeck, Nadia; Maeder, Xavier; Michler, Johann | Zeitschriftenaufsatz |
| 2020 | Number-based characterization of microplastics
Oelschlägel, Kathrin; Benke, Annegret; Göhler, Daniel; Potthoff, Annegret; Rudolph, Andreas | Poster |
| 2020 | Numerical and experimental study of the mechanical response of diatom frustules
Topal, Emre; Rajendran, Hariskaran; Zglobicka, Izabela; Gluch, Jürgen; Liao, Zhongquan; Clausner, André; Kurzydłowski, Krzysztof Jan; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2020 | Observation of yttrium oxide segregation in a ZrO2-SiO2 glass-ceramic at nanometer dimensions
Fu, Le; Wang, Yiren; Riekehr, Lars; Räthel, Jan; Engqvist, Håkan; Xia, Wei | Zeitschriftenaufsatz |
| 2020 | Offenzelliges Keramiknetzwerk und Verfahren zu seiner Herstellung
Füssel, Alexander; Adler, Jörg | Patent |
| 2020 | On the application of actively and passively excited guided elastic waves for the monitoring of fiber-reinforced plastics
Tschöke, Kilian; Gaul, Tobias; Pietzsch, Alexander; Schulze, Eberhard; Schubert, Lars | Zeitschriftenaufsatz |
| 2020 | Optimization of K-Cu-Mo promoted iron Fischer-Tropsch catalyst. A design-of-experiments approach
Wolke, Florian; Voigt, Markus; Medicus, M.; Reichelt, Erik; Jahn, Matthias | Poster |
| 2020 | Optimization of supported iron-based Fischer-Tropsch catalysts for higher alcohol production
Medicus, Maximilian; Merkel, Michael; Reichelt, Erik; Jahn, Matthias | Poster |
| 2020 | Oxidation behaviour of silicon carbide bonded diamond materials
Herrmann, Mathias; Adloff, Lena; Matthey, Björn; Gestrich, Tim | Zeitschriftenaufsatz |
| 2020 | Phthalocyanine-based 2D conjugated metal-organic framework nanosheets for high-performance micro-supercapacitors
Wang, Mingchao; Shi, Huanhuan; Zhang, Panpan; Liao, Zhongquan; Wang, Mao; Zhong, Haixia; Schwotzer, Friedrich; Shaygan Nia, Ali; Zschech, Ehrenfried; Zhou, Shengqian; Kaskel, Stefan; Dong, Renhao; Feng, Xinliang | Zeitschriftenaufsatz |
| 2020 | Polungsstrategien und Eigenschaftsoptimierung für integrierte piezoelektrische Keramiken
Eßlinger, Sophia
: Michaelis, Alexander | Dissertation |
| 2020 | Porous sandwich ceramic of layered silicon nitride-zirconia composite with various multilayered graphene content
Balazsi, Katalin; Furko, Monika; Liao, Zhongquan; Gluch, Jürgen; Medved, David; Sedlák, Richard; Dusza, Jan; Zschech, Ehrenfried; Balazsi, Csaba | Zeitschriftenaufsatz |
| 2020 | Pressureless sintering and properties of boron carbide composite materials
Martin, Hans-Peter; Feng, Bing; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Printed miniaturized platinum heater on ultra-thin ceramic membrane for mox gas sensors
Fritsch, Marco; Mosch, Sindy; Vinnichenko, Mykola; Trofimenko, Nikolai; Kusnezoff, Mihails; Fuchs, Franz-Martin; Wissmeier, Lena; Samotaev, Nikolay; Oblov, Konstantin | Abstract |
| 2020 | Process data-based knowledge discovery in additive manufacturing of ceramic materials by multi-material jetting (CerAM MMJ)
Lang, Valentin; Weingarten, Steven; Wiemer, Hajo; Scheithauer, Uwe; Glausch, Felix; Johne, Robert; Michaelis, Alexander; Ihlenfeldt, Steffen | Zeitschriftenaufsatz |
| 2020 | Processing of Sulfide Solid Electrolytes for All-Solid-State Battery Electrodes. A Scalable Composite Cathode Manufacturing Approach
Auer, Henry; Seidel, Matthias; Heubner, Christian; Nikolowski, Kristian; Reuber, Sebastian; Wolter, Mareike | Vortrag |
| 2020 | Promoted oxygen reduction kinetics on nitrogen-doped hierarchically porous carbon by engineering proton-feeding centers
Chen, Guangbo; Wang, Tao; Liu, Pan; Liao, Zhongquan; Zhong, Haixia; Wang, Gang; Zhang, Panpan; Yu, Minghao; Zschech, Ehrenfried; Chen, Mingwei; Zhang, Jian; Feng, Xinliang | Zeitschriftenaufsatz |
| 2020 | Publisher Correction: Synergistic electroreduction of carbon dioxide to carbon monoxide on bimetallic layered conjugated metal-organic frameworks
Zhong, H.; Ghorbani-Asl, M.; Ly, K.H.; Zhang, J.; Ge, J.; Wang, M.; Liao, Z.; Makarov, D.; Zschech, E.; Brunner, E.; Weidinger, I.M.; Zhang, J.; Krasheninnikov, A.V.; Kaskel, S.; Dong, R.; Feng, X. | Zeitschriftenaufsatz |
| 2020 | Pyrocatalysis - The DCF assay as a pH-robust tool to determine the oxidation capability of thermally excited pyroelectric powders
Raufeisen, Sascha; Stelter, Michael; Bräutigam, Patrick | Zeitschriftenaufsatz |
| 2020 | Pyrocatalytic oxidation - strong size-dependent poling effect on catalytic activity of pyroelectric BaTiO3 nano- and microparticles
Raufeisen, Sascha; Neumeister, Peter; Buchheim, Johannes; Stelter, Michael; Bräutigam, Patrick | Zeitschriftenaufsatz |
| 2020 | Quantitative detection of anodic oxygen evolution on solid state sintered silicon carbide under near ECM conditions
Schneider, Michael; Simunkova, Lenka; Junker, Nils; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Reaktionsgefügte keramische Bauteile und Verfahren zu ihrer Herstellung
Kunze, Steffen; Adler, Jörg; Heymer, Heike | Patent |
| 2020 | Real embedding process of SiC devices in a monolithic ceramic package using LTCC technology
Lenz, Christian; Ziesche, Steffen; Schletz, Andreas; Bach, Hoang Linh; Erlbacher, Thomas | Konferenzbeitrag |
| 2020 | Recent Advances in Manufacturing Innovative Stents
Beshchasna, Natalia; Saqib, Muhammad; Kraśkiewicz, Honorata; Wasyluk, Łukasz; Kuzmin, Oleg; Duta, Oana Cristina; Ficai, Denisa; Ghizdăveţ, Zeno; Marin, Alexandru; Ficai, Anton; Sun, Zhilei; Pichugin, Vladimir F.; Opitz, Jörg; Andronescu, Ecaterina | Zeitschriftenaufsatz |
| 2020 | Reduced sintering temperatures of Li+ conductive Li1.3Al0.3Ti1.7(PO4)3 ceramics
Wätzig, Katja; Heubner, Christian; Kusnezoff, Mihails | Zeitschriftenaufsatz |
| 2020 | Relation between hardmetal properties and process temperatures during metal cutting
Vornberger, Anne; Pötschke, Johannes; Herrmann, Mathias; Picker, Tobias; Michaelis, Alexander | Konferenzbeitrag |
| 2020 | Robust development, validation and manufacturing processes for hybrid metal-composite lightweight structures
Haider, Daniel Reinhold; Gerritzen, J.; Folprecht, F.; Krahl, M.; Spitzer, S.; Gude, M.; Hillmann, S.; Köhler, B.; Kopycinska-Müller, M.; Schulze, M.; Heuer, H.; Opitz, Jörg | Konferenzbeitrag |
| 2020 | The role of balancing nanostructured silicon anodes and NMC cathodes in lithium-ion full-cells with high volumetric energy density
Baasner, Anne; Reuter, Florian; Seidel, Matthias; Krause, Andreas; Pflug, Erik; Härtel, Paul; Dörfler, Susanne; Abendroth, Thomas; Althues, Holger; Kaskel, Stefan | Zeitschriftenaufsatz |
| 2020 | Scalable fabrication of gold nanoparticles with adjustable size distribution as catalytic nuclei for the CVD growth of silicon nanowires
Langklotz, Ulrike; Lein, Tobias; Schulze, Claudia; Weiser, Mathias; Krause, Andreas; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Schichtperowskittemplate für die Texturierung von bleifreien KNN-Keramiken
Briegel, Christoph
: Michaelis, Alexander | Dissertation |
| 2020 | Selektive Synthese von höheren Alkoholen an eisenbasierten Katalysatoren
Schaller, Max Rudolf
: Michaelis, Alexander (Gutachter); Turek, Thomas (Gutachter); Jahn, Matthias (Gutachter) | Dissertation |
| 2020 | Simulating permeabilities based on 3D image data of a layered nano-porous membrane
Prill, Torben; Redenbach, Claudia; Roldan, Diego; Godehardt, Michael; Schladitz, Katja; Höhn, Sören; Sempf, Kerstin | Zeitschriftenaufsatz |
| 2020 | Simulationsbasierte Optimierung eines Messstandes zur optischen Vermessung von thermo-mechanischen Verformungen
Schwerz, Robert; Röllig, Mike | Konferenzbeitrag |
| 2020 | Simulationsgestützte Analyse von Through-hole Technology Verbindungsstellen der Elektronik im Automobilbereich
Berger, R.; Olfe, Jürgen; Rogowski, Sebastian; Röllig, Mike; Münch, Stefan; Schwerz, Robert; Heuer, Henning | Konferenzbeitrag |
| 2020 | A sodium polysulfide battery with liquid/solid electrolyte: Improving sulfur utilization using P2S5 as additive and tetramethylurea as catholyte solvent
Medenbach, Lukas; Hartmann, Pascal; Janek, Jürgen; Stettner, Timo; Balducci, Andrea; Dirksen, Cornelius; Schulz, Martin; Stelter, Michael; Adelhelm, Philipp | Zeitschriftenaufsatz |
| 2020 | SOEC a key for power-to-x processes
Megel, Stefan; Jahn, Matthias | Vortrag |
| 2020 | Sonochemical coating: Effect of energy input and distance on the functionalization of textiles with TiO2 and ZnO-Nanoparticles
Weiße, Maik; Schmidt, C.; Abramova, Anna V.; Voitov, Yuri; Stelter, Michael; Bräutigam, Patrick | Zeitschriftenaufsatz |
| 2020 | The sorption behaviour of amine micropollutants on polyethylene microplastics - impact of aging and interactions with green seaweed
Vockenberg, Thorben; Wichard, Thomas; Ueberschaar, Nico; Franke, Marcus; Stelter, Michael; Bräutigam, Patrick | Zeitschriftenaufsatz |
| 2020 | Sources of parasitic features in the visible range of oxide transparent ceramics absorption spectra
Goldstein, Adrian; Katz, Michael; Boulesteix, Rémy; Shames, Alexander; Coureau, Christope; Räthel, Jan; Mateos-Ferre, Xavier; Loiko, Pavel | Zeitschriftenaufsatz |
| 2020 | Stress-induced transistor degradation studied by an indentation approach
Schlipf, Simon; Clausner, André; Paul, Jens; Capecchi, Simone; Wambera, Laura; Meier, Karsten; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2020 | Study of structure and properties of Fe-based amorphous ribbons after pulsed laser interference heating
Czyz, Olaf; Kusinski, Jan; Radziszewska, Agnieszka; Liao, Zhongquan; Zschech, Ehrenfried; Kac, Malgorzata; Ostrowski, Roman | Zeitschriftenaufsatz |
| 2020 | Sustainable industrial wastewater reuse using ceramic nanofiltration: Results from two pilot projects in the oil and gas and the ceramics industries
Beery, Martan; Pflieger, Christian; Weyd, Marcus | Zeitschriftenaufsatz |
| 2020 | Synergistic electroreduction of carbon dioxide to carbon monoxide on bimetallic layered conjugated metal-organic frameworks
Zhong, Haixia; Ghorbani-Asl, Mahdi; Ly, Khoa Hoang; Zhang, Jichao; Ge, Jin; Wang, Mingchao; Liao, Zhongquan; Makarov, Denys; Zschech, Ehrenfried; Brunner, Eike; Weidinger, Inez M.; Zhang, Jian; Krasheninnikov, Arkady V.; Kaskel, Stefan; Dong, Renhao; Feng, Xinliang | Zeitschriftenaufsatz |
| 2020 | Synthesis and sintering of Li1.3Al0.3Ti1.7(PO4)3 (LATP) electrolyte for ceramics with improved Li+ conductivity
Wätzig, Katja; Rost, Axel; Heubner, Christian; Coeler, Matthias; Nikolowski, Kristian; Wolter, Mareike; Schilm, Jochen | Zeitschriftenaufsatz |
| 2020 | Systematic investigation about the influence of two-step sintering on microstructure properties of ZTA ceramics
Tschirpke, Caroline; Reichel, Uwe; Begand, Sabine; Simon, Kerstin | Zeitschriftenaufsatz |
| 2020 | Thick film paste systems for multifunctional copper power modules
Reinhardt, Kathrin; Körner, Stefan; Partsch, Uwe | Konferenzbeitrag |
| 2020 | Towards a wastewater energy recovery system: The utilization of humidified ammonia by a solid oxide fuel cell stack
Stoeckl, Bernhard; Preininger, Michael; Subotić, Vanja; Megel, Stefan; Folgner, Christoph; Hochenauer, Christoph | Zeitschriftenaufsatz |
| 2020 | Transparent Ceramics
Goldstein, Adrian; Krell, Andreas; Burshstein, Zeev | Buch |
| 2020 | Treatment with bisphosphonates to mitigate calcification of elastin-containing bioprosthetic materials
Zhuravleva, Irina Y.; Polienko, Yuliya F.; Karpova, Elena V.; Timchenko, Tatyana P; Vasilieva, Maria B.; Baratova, Ludmila A.; Shatskaya, Svetlana S.; Kuznetsova, Elena V.; Nichay, Nataliya R.; Beshchasna, Natalia; Bogachev-Prokophiev, Alexander V. | Zeitschriftenaufsatz |
| 2020 | Two-Dimensional boronate ester covalent organic framework thin films with large single crystalline domains for neuromorphic memory device
Park, Sang Wook; Liao, Zhongquan; Ibarlucea, Bergoi; Qi, Haoyuan; Lin, Hung-Hsuan; Becker, Daniel; Melidonie, Jason; Zhang, Tao; Sahabudeen, Hafeesudeen; Baraban, Larysa; Baek, Chang-Ki; Zheng, Zhikun; Zschech, Ehrenfried; Fery, Andreas; Heine, Thomas; Kaiser, Ute; Cuniberti, Gianaurelio; Dong, Renhao; Feng, Xinliang | Zeitschriftenaufsatz |
| 2020 | Two‐Dimensional Boronate Ester Covalent Organic Framework Thin Films with Large Single Crystalline Domains for a Neuromorphic Memory Device
Park, S.; Liao, Z.; Ibarlucea, B.; Qi, H.; Lin, H.-H.; Becker, D.; Melidonie, J.; Zhang, T.; Sahabudeen, H.; Baraban, L.; Baek, C.-K.; Zheng, Z.; Zschech, E.; Fery, A.; Heine, T.; Kaiser, U.; Cuniberti, G.; Dong, R.; Feng, X. | Zeitschriftenaufsatz |
| 2020 | Untersuchungen zum Einfluss von Signalgrößen auf Prozesscharakteristika beim Pulsanodisieren von Aluminium
Lämmel, Christoph
: Michaelis, Alexander | Dissertation |
| 2020 | Utilizing acoustic emission signals to evaluate BEoL stack damages of two different sample systems caused by Cu-pillar shear-off
Silomon, Jendrik; Clausner, André; Zschech, Ehrenfried | Konferenzbeitrag |
| 2020 | Verfahren zur Herstellung von individuell gekennzeichneten Bauteilen
Scheithauer, Uwe; Weingarten, Steven; Johne, Robert; Müller-Wittig, Wolfgang | Patent |
| 2020 | Weiterentwicklung von Schichten aus dem System Al2O3-TiO2
Conze, Susan; Berger, Lutz-Michael; Richter, Alexei; Vaßen, Robert | Zeitschriftenaufsatz |
| 2020 | Werkzeugintegrierte Sensorik zur Onlineüberwachung von Fräsprozessen
Ettrichrätz, Martin; Gebhardt, Sylvia | Zeitschriftenaufsatz |
| 2020 | Wet chemical deposition of BN, SiC and Si3N4 interphases on SiC fibers
Nöth, Andreas; Maier, Jonathan; Schönfeld, Katrin; Klemm, Hagen | Zeitschriftenaufsatz |
| 2020 | Zinc-Mediated template synthesis of Fe-N-C electrocatalysts with densely accessible Fe-Nx active sites for efficient oxygen reduction
Chen, Guangbo; Liu, Pan; Liao, Zhongquan; Sun, Fanfei; He, Yanghua; Zhong, Haixia; Zhang, Tao; Zschech, Ehrenfried; Chen, Mingwei; Wu, Gang; Zhang, Jian; Feng, Xinliang | Zeitschriftenaufsatz |
| 2019 | 3D Diatom-Designed and selective laser melting (SLM) manufactured metallic structures
Zglobicka, Izabela; Chmielewska, Agnieszka; Topal, Emre; Kutukova, Kristina; Gluch, Jürgen; Krüger, Peter; Kilroy, Cathy; Święszkowski, Wojciech; Kurzydłowski, Krzysztof Jan; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2019 | 3D-customized thin-walled ceramic mouldings produced by deep drawing of green tapes
Schwarzer, Eric; Olawsky, Lukas; Hagen, Florian; Scheithauer, Uwe; Moritz, Tassilo; Richter, Hans-Jürgen; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2019 | Additive manufacturing of ceramic components
Scheithauer, Uwe; Richter, Jürgen | Aufsatz in Buch |
| 2019 | Additive manufacturing of functionalized glass components
Schilm, Jochen; Moritz, Tassilo; Wagner, Dörte; Schwarzer, Eric; Weingarten, Steven; Wätzig, Katja | Zeitschriftenaufsatz |
| 2019 | Additive Manufacturing of Functionally Graded Ceramic Materials by Stereolithography
Gonzales, Pablo; Schwarzer, Eric; Scheithauer, Uwe; Kooijmans, Norbertus; Moritz, Tassilo | Zeitschriftenaufsatz |
| 2019 | Alternative process routes to manufacture porous ceramics - Opportunities and challenges
Scheithauer, Uwe; Kerber, Florian; Füssel, Alexander; Holtzhausen, Stefan; Beckert, Wieland; Schwarzer, Eric; Weingarten, Steven; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2019 | Ammonia as promising fuel for solid oxide fuel cells: Experimental analysis and performance evaluation
Stoeckl, Bernhard; Preininger, Michael; Subotić, Vanja; Schroettner, Hartmuth; Sommersacher, Peter; Seidl, Michael; Megel, Stefan; Hochenauer, Christoph | Konferenzbeitrag |
| 2019 | Analysis of flip-chip solder joints under isothermal vibration loading
Meier, Karsten; Leslie, David; Dasgupta, Abhijit; Röllig, Mike; Bock, Karlheinz | Konferenzbeitrag |
| 2019 | Anodic dissolution of chromium at high current densities in sodium nitrate electrolyte
Schneider, Michael; Simunkova, Lenka; Manko, Michal; Lohrengel, M.M.; Hoogsteen, W. | Zeitschriftenaufsatz |
| 2019 | Anodizing - interplay between bath aging and oxide formation and properties
Schneider, Michael; Kremmer, Kerstin; Gierth, Uta | Zeitschriftenaufsatz |
| 2019 | Anordnung und Verfahren zur Prüfung sensitiver Elemente oder elektrochemischer Zellen
Kusnezoff, Mihails; Trofimenko, Nikolai; Sauchuk, Viktar | Patent |
| 2019 | Anpassung des EFIT-Algorithmus zur Anwendung rechnergestützter POD-Methoden im SHM-Bereich
Tschöke, Kilian
: Matthies, Gunar (1. Gutachter); Wensch, Jörg (2. Gutachter); Mueller, Inka (3. Gutachter); Schubert, Lars (Betreuer) | Dissertation |
| 2019 | Application of µCT for the determination of total surface area of stents
Saqib, Muhammad; Bernhardt, Ricardo; Kästner, Markus; Beshchasna, Natalia; Cuniberti, Gianaurelio; Opitz, Jörg | Konferenzbeitrag |
| 2019 | Application of empirical hardness models on hardmetals with alternative binders
Vornberger, Anne; Pötschke, Johannes; Mayer, Markus; Michaelis, Alexander | Konferenzbeitrag |
| 2019 | Automatisierung der zerstörungsfreien Prüfung von großen Stahlgussbauteilen
Heuer, Henning | Zeitschriftenaufsatz |
| 2019 | An autonomous flame ionization detector for emission monitoring
Förster, Jan; Kuipers, Winfred J.; Lenz, Christian; Ziesche, Steffen; Bechtold, Franz | Zeitschriftenaufsatz |
| 2019 | Bauteil, das mit ß-Siliciumnitridwerkstoff gebildet ist und ein Verfahren zu seiner Herstellung
Fuchs, Marcel; Herrmann, Mathias; Kaden, Thomas; Wolfrum, Anne-Kathrin | Patent |
| 2019 | Bewertung der Zuverlässigkeit von keramischen Federn für korrosive Umgebungen und hohe Temperaturen
Koplin, C.; Kailer, A.; Stockmann, J.; Beckert, W. | Bericht |
| 2019 | BN-based fiber coatings by wet-chemical coating
Maier, Jonathan; Nöth, Andreas; Schönfeld, Katrin | Konferenzbeitrag |
| 2019 | Boron-doped diamond with improved oxidation resistance
Herrmann, Mathias; Matthey, Björn; Gestrich, Tim | Zeitschriftenaufsatz |
| 2019 | Brazes for extremely high temperatures
Martin, Hans-Peter; Roszeitis, Sven; Matthey, Björn; Herrmann, Marion; Graffé, Marius; Lippmann, Wolfgang; Schmidt, Marcus Peter; Burkhardt, Ulrich; Michaelis, Alexander | Konferenzbeitrag |
| 2019 | Bremseinrichtung für ein Zweirad
Neubert, Holger; Neumeister, Peter | Patent |
| 2019 | Carbon membranes for bio gas upgrading
Richter, Hannes; Reger-Wagner, Norman; Kämnitz, Susanne; Voigt, Ingolf; Lubenau, Udo; Mothes, Raymond | Zeitschriftenaufsatz |
| 2019 | Ceramic additive manufacturing methods applied to sintered glass components with novel properties
Moritz, Tassilo; Schilm, Jochen; Rost, Axel; Schwarzer, Eric; Weingarten, Steven; Scheithauer, Uwe; Wätzig, Katja; Wagner, Dörte; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2019 | Chabazite-type zeolite membranes for effective CO2 separation: The role of hydrophobicity and defect structure
Lee, Minseong; Hong, Sungwon; Kim, Dongjae; Kim, Eunjoo; Lim, Kyunghwan; Jung, Jaechil; Richter, Hannes; Moon, Jongho; Choi, Nakwon; Nam, Jaewook; Choi, Jungkyu | Zeitschriftenaufsatz |
| 2019 | Characterisation of transition metal doped Li+-stabilized Na-beta''-alumina electrolytes
Dirksen, Cornelius; Augustina, Anisa Isabella; Schulz, Matthias; Stelter, Michael | Abstract |
| 2019 | Cleaving silicene-terminated calcium disilicide in the transmission electron microscope
Liao, Zhongquan; Standke, Yvonne; Gluch, Jürgen; Brazda, Petr; Kopecek, Jaromir; Klementova, Mariana; Palatinus, Lukas; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2019 | Co-Electrolysis CFY-Stack Operation and Integration for Carbon Capture and Utilization
Kusnezoff, Mihails; Megel, Stefan; Rix, Christopher; Adam, Paul; Reichelt, Erik; Herz, Gregor; Jahn, Matthias; Trofimenko, Nikolai; Michaelis, Alexander | Konferenzbeitrag |
| 2019 | The combination of minimally invasive electrochemical investigations and FTIR-spectroscopy to analyze atmospheric corrosion product layers on zinc
Langklotz, Ulrike; Babutzka, Martin; Schneider, Michael; Burkert, Andreas | Zeitschriftenaufsatz |
| 2019 | Combined wear and ageing of ceramic-on-ceramic bearings in total hip replacement under edge loading conditions
Al-Hajjar, Mazen; Grémillard, Laurent; Begand, Sabine; Oberbach, Thomas; Hans, Karen; Delfosse, Daniel; Chêvalier, Jérôme; Jennings, Louise M. | Zeitschriftenaufsatz |
| 2019 | Comparison of electrochemical degradation for spray dried and pulse gas dried LiNi0.5Mn1.5O4
Seidel, Matthias; Kugaraj, Muthuraman; Nikolowski, Kristian; Wolter, Mareike; Kinski, Isabel; Jähnert, Thomas; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2019 | Comparison of Nickel and Cobalt Bonded Nanoscaled Hardmetals
Fabijanić, Tamara Aleksandrov; Pötschke, Johannes; Mayer, Markus; Škrinjarić, Irbas; Kurtela, Marin | Konferenzbeitrag |
| 2019 | A comprehensive study on improved power materials for high-temperature thermoelectric generators
Bittner, Michael; Kanas, Nikola; Hinterding, Richard; Steinbach, Frank; Räthel, Jan; Schrade, Matthias; Wiik, Kjell; Einarsrud, Mari-Ann; Feldhoff, Armin | Zeitschriftenaufsatz |
| 2019 | Corrigendum: Iron-Based Fischer-Tropsch Catalysts for Higher Alcohol Synthesis (Chemie Ingenieur Technik, (2018), 90, 5, (713-720), 10.1002/cite.201700154)
Schaller, Max Rudolf; Reichelt, Erik; Jahn, Matthias | Zeitschriftenaufsatz |
| 2019 | Corrosion behavior of anodized AA-6060 depending on the anodizing bath aging
Schneider, Michael; Kremmer, Kerstin | Zeitschriftenaufsatz |
| 2019 | Current Induced Barkhausen Noise Technique
Birkefeld, Claudius; Hillmann, Susanne; Cikalova, Ulana; Funke, Hendrik | Poster |
| 2019 | Degradation von metallischen Kontaktierungskomponenten bei Hochtemperatur-Brennstoffzellen
Folgner, Christoph
: Michaelis, Alexander (Gutachter); Leyens, Christoph (Gutachter); Kusnezoff, Mihails (Betreuer) | Dissertation |
| 2019 | Determining fundamental properties from diffraction: Electric field induced strain and piezoelectric coefficient
Hinterstein, Manuel; Lee, Kai-Yang; Eßlinger, Sophia; Glaum, Julia; Studer, Andrew; Hoffman, Mark; Hoffmann, Michael Johannes | Zeitschriftenaufsatz |
| 2019 | Development of 40 MHz Ultrasonic Transducers via Soft Mold Process
Günther, Paul; Neumeister, Peter; Neubert, Holger; Gebhardt, Sylvia | Zeitschriftenaufsatz |
| 2019 | Development of a 20 MHz annular-array - a balancing act between optimized design and technological opportunities
Juhrig, Andre; Schmidt, Ulrike; Wolf, Mario; Kühnicke, Elfgard; Günther, Paul A.; Gebhardt, Sylvia | Konferenzbeitrag |
| 2019 | Development of a visual inspection system and the corresponding algorithm for the detection and subsequent classification of paint defects on car bodies in the automotive industry
Kieselbach, Kim Katharina; Nöthen, Matthias; Heuer, Henning | Zeitschriftenaufsatz |
| 2019 | Development of the local proton concentration during pulse anodizing
Lämmel, Christoph; Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2019 | Editorial for the Special Issue "Characterization of Nanomaterials: Selected Papers from 6th Dresden Nanoanalysis Symposium"
Zschech, Ehrenfried; Sinclair, Robert; Martins, Rodrigo; Sebastiani, Marco; Sartori, Sabrina | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2019 | Effect of electric load and dual atmosphere on the properties of an alkali containing diopside-based glass sealant for solid oxide cells
Sabato, A.G.; Rost, Axel; Schilm, Jochen; Kusnezoff, Mihails; Salvo, Milena; Chrysanthou, Andreas; Smeacetto, Federico | Zeitschriftenaufsatz |
| 2019 | The effect of Fe as constituent in Ni-base alloys on the oxygen evolution reaction in alkaline solutions at high current densities
Rauscher, Thomas; Bernäcker, Christian Immanuel; Mühle, Uwe; Kieback, Bernd F.; Röntzsch, Lars | Zeitschriftenaufsatz |
| 2019 | Effect of processing on high-velocity water vapor recession behavior of Yb-silicate environmental barrier coatings
Bakan, Emine; Sohn, Yoo Jung; Kunz, Willy; Klemm, Hagen; Vaßen, Robert | Zeitschriftenaufsatz |
| 2019 | Effects of TiO2 doping on Li+-stabilized Na-β"-alumina for energy storage applications
Dirksen, Cornelius; Skadell, Karl; Schulz, Matthias; Stelter, Michael | Zeitschriftenaufsatz |
| 2019 | Einfluss der Herstellungsbedingungen auf die mechanische Stabilität asymmetrischer BSCF-Membranen für die Sauerstoff-Bereitstellung
Hoffmann, Robert
: Rettenmayr, Markus (Gutachter); Meulenberg, Wilhelm Albert (Gutachter); Caro, Jürgen | Dissertation |
| 2019 | Electrodeposited manganese oxide on superhydrophobic nickel-mesh for application in gas diffusion electrode
Bekisch, Artur; Skadell, Karl; Schulz, Matthias; Stelter, Michael | Abstract |
| 2019 | Emergence and Impact of Al2TiO5 in Al2O3-TiO2 APS Coatings
Richter, Alexei; Berger, Lutz-Michael; Conze, Susan; Sohn, Yoo Jung; Vaßen, Robert | Konferenzbeitrag |
| 2019 | Engineering crystalline quasi-two-dimensional polyaniline thin film with enhanced electrical and chemiresistive sensing performances
Zhang, Tao; Qi, Haoyuan; Liao, Zhongquan; Horev, Yehu David; Panes-Ruiz, Luis Antonio; Petkov, Petko S.; Zhang, Zhe; Shivhare, Rishi Ramdas; Zhang, Panpan; Liu, Kejun; Bezugly, Viktor; Liu, Shaohua; Zheng, Zhikun; Mannsfeld, Stefan C.B.; Heine, Thomas; Cuniberti, Gianaurelio; Haick, Hossam; Zschech, Ehrenfried; Kaiser, Ute; Dong, Renhao; Feng, Xinliang | Zeitschriftenaufsatz |
| 2019 | Enhanced performance stability of iridium oxide-based pH sensors fabricated on rough inkjet-printed platinum
Zea, Miguel; Moya, Ana; Fritsch, Marco; Ramon, Eloi; Villa, Rosa; Gabriel, Gemma | Zeitschriftenaufsatz |
| 2019 | Enhancement of sensitivity to delamination in eddy current testing of carbon fiber composites by varying probe geometry
Mizukami, Koichi; Ibrahim, Ahmad Syukri Bin; Ogi, Keiji; Matvieieva, Nataliia; Kharabet, Ievgen I.; Schulze, Martin; Heuer, Henning | Zeitschriftenaufsatz |
| 2019 | Entwicklung keramischer Perowskit-Werkstoffe und Bauelementstrukturen für elektrokalorische Anwendungen
Molin, Christian
: Michaelis, Alexander (Gutachter); Gerlach, Gerald (Gutachter); Gebhardt, Sylvia (Betreuer) | Dissertation |
| 2019 | Entwicklung selbstheilender Materialien zum Korrosionsschutz für Keramiken in Hochtemperaturanwendungen
Kunz, Willy
: Michaelis, Alexander (Gutachter); Vaßen, Robert (Gutachter) | Dissertation |
| 2019 | Erkennung von Krebszellen in Prostata-Biopsien durch die zeitaufgelöste Fluoreszenz-Spektroskopie
Lehmann, Andreas; Schreiber, Luise; Gerich, Carola; Schreiber, Jürgen; Opitz, Jörg | Poster |
| 2019 | Evaluation of a method for micro-defect sealing in ZSM-5 zeolite membranes by chemical vapor deposition of carbon
Simon, Adrian; Richter, Hannes; Reif, Benjamin; Schülein, Marion; Sanwald, Dirk; Schwieger, Wilhelm | Zeitschriftenaufsatz |
| 2019 | Evidence for the AlZn-Oi defect-complex model for magnetron-sputtered aluminum-doped zinc oxide: A combined X-ray absorption near edge spectroscopy, X-ray diffraction and electronic transport study
Bikowski, André; Zajac, Dariusz A.; Vinnichenko, Mykola; Ellmer, Klaus | Zeitschriftenaufsatz |
| 2019 | Experimental and numerical evaluation of a small array of ceramic foam volumetric absorbers
Zaversky, Fritz; Aldaz, Leticia; Sánchez, Marcelino A.D.; Fernández-Reche, Jesús; Füssel, Alexander; Adler, Jörg | Konferenzbeitrag |
| 2019 | An experimental and numerical survey into the potential of hybrid foams
Hohe, Jörg; Beckmann, Carla; Böhme, Wolfgang; Weise, Jörg; Reinfried, Matthias; Luthardt, Fabian; Rapp, Florian; Diemert, Jan | Zeitschriftenaufsatz |
| 2019 | Fast fuel variation and identification of SOFC system changes using online health monitoring tools and fault diagnosis
Subotić, Vanja; Harter, Philipp; Stoeckl, Bernhard; Preininger, Michael; Kusnezoff, Mihails; Lawlor, Vincent; Pofahl, Stefan; Napporn, Teko; Megel, Stefan; Schroettner, Hartmuth; Hochenauer, Christoph | Konferenzbeitrag |
| 2019 | Fast response hydrogel-based plasmonic sensor substrate for the detection of ethanol
Kroh, Christoph; Wuchrer, Roland; Steinke, Nadja; Günther, Margarita; Gerlach, Gerald; Härtling, Thomas | Konferenzbeitrag |
| 2019 | Fertigungstechnologien für Ultraschallwandler im Frequenzbereich zwischen 40 kHz und 40 MHz
Gebhardt, Sylvia; Günther, Paul; Hohlfeld, Kai; Neubert, Holger | Zeitschriftenaufsatz |
| 2019 | Fraunhofer Institute for Ceramic Technologies and Systems. Annual Report 2018/2019
| Jahresbericht |
| 2019 | Fraunhofer-Institut für Keramische Technologien und Systeme. Jahresbericht 2018/2019
| Jahresbericht |
| 2019 | Fully printed zinc oxide electrolyte-gated transistors on paper
Carvalho, José Tiago; Dubceac, Viorel; Grey, Paul; Cunha, Ines; Fortunato, Elvira; Martins, Rodrigo; Clausner, André; Zschech, Ehrenfried; Pereira, Luis | Zeitschriftenaufsatz |
| 2019 | Functional integration approaches via laser powder bed processing
Moritz, Juliane; Seidel, André; Braun, Bernard; Brandão, Ana D.; Pambaguian, Laurent; Köhler, Bernd; Barth, Martin; Riede, Mirko; Lopez, Elena; Brückner, Frank; Leyens, Christoph | Zeitschriftenaufsatz |
| 2019 | Functional Printing of MMIC-Interconnects on LTCC Packages for sub-THz applications
Ihle, Martin; Ziesche, Steffen; Zech, Christian; Baumann, Benjamin | Konferenzbeitrag |
| 2019 | Funktionale Schichten für gassensorische Anwendungen
Dietrich, Stefan
: Michaelis, Alexander (1. Gutachter); Guth, Ulrich (2. Gutachter) | Dissertation |
| 2019 | Fused Filament Fabrication (FFF) of Metal-Ceramic Components
Abel, Johannes; Scheithauer, Uwe; Janics, Thomas; Hampel, Stefan; Cano, Santiago; Müller-Köhn, Axel; Günther, Anne; Kukla, Christian; Moritz, Tassilo | Zeitschriftenaufsatz |
| 2019 | Future AM. Die nächste Generation additiver Fertigungsverfahren
Schleifenbaum, Johannes Henrich; Tenbrock, C.; Emmelmann, Claus; Leyens, Christoph; Brückner, Frank; Michaelis, Alexander | Aufsatz in Buch |
| 2019 | Gewebecharakterisierung mittels fraktalem Fluoreszenzabklingverhalten und optischer Kohärenztomografie
Schreiber, Luise; Lehmann, Andreas; Schreiber, Jürgen; Opitz, Jörg | Poster |
| 2019 | Herstellung von amorphen SiCN-Verbundbauteilen über die spritzgusstechnische Verarbeitung von kohlenstoffkurzfaserverstärkten Polysilazanen
Müller-Köhn, Axel
: Michaelis, Alexander (1. Gutachter); Koch, Dietmar (2. Gutachter) | Dissertation |
| 2019 | High-performance ultrasonic transducers based on PMN-PT single crystals fabricated in 1-3 Piezo-Composite Technology
Herzog, Thomas; Walter, Susan; Lee, Sang-Goo; Lee, Jeong-Ho; Schubert, Frank; Heuer, Henning | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2019 | High-Temperature packaging for sensors
Rebenklau, Lars; Gierth, Paul; Barth, Henry | Konferenzbeitrag |
| 2019 | How to measure flexibility - performance indicators for demand driven power generation from biogas plants
Dotzauer, Martin; Pfeiffer, Diana; Lauer, Markus; Pohl, Marcel; Mauky, Eric; Bär, Katharina; Sonnleitner, Matthias; Zörner, Wilfried; Hudde, Jessica; Schwarz, Björn; Faßauer, Burkhardt; Dahmen, Markus; Rieke, Christian; Herbert, Johannes; Thrän, Daniela | Zeitschriftenaufsatz |
| 2019 | HTCC-Multilayerbasierte Ionensensitive Sensoren für die Wasseranalyse
Feller, Claudia; Partsch, Uwe; Körner, Stefan | Konferenzbeitrag |
| 2019 | Hydrogel-based plasmonic sensor substrate for the detection of ethanol
Kroh, Christoph; Wuchrer, Roland; Steinke, Nadja; Günther, Margarita; Gerlach, Gerald; Härtling, Thomas | Zeitschriftenaufsatz |
| 2019 | Immobilization of detonation nanodiamonds on macroscopic surfaces
Balakin, Sascha; Dennison, Nicholas R.; Klemmed, Benjamin; Spohn, Juliane; Cuniberti, Gianaurelio; Römhildt, Lotta; Opitz, Jörg | Zeitschriftenaufsatz |
| 2019 | Impact of Al2O3-40 wt.% TiO2 Feedstock Powder Characteristics on the Sprayability, Microstructure and Mechanical Properties of Plasma Sprayed Coatings
Richter, Alexei; Berger, Lutz-Michael; Sohn, Yoo Jung; Conze, Susan; Sempf, Kerstin; Vaßen, Robert | Zeitschriftenaufsatz |
| 2019 | Impact of extrusion parameters on the mechanical performance of tubular BSCF-supports for asymmetric oxygen transporting membranes
Hoffmann, Robert; Pippardt, Ute; Kriegel, Ralf | Zeitschriftenaufsatz |
| 2019 | Impact of mechanical strain on 22 nm FDSOI device performance using nanoindentation
Schlipf, Simon; Clausner, André; Paul, Jens; Capecchi, Simone; Kurz, G.; Zschech, Ehrenfried | Konferenzbeitrag |
| 2019 | Impact of sintering temperature on permeation and long-term development of support structure and stability for asymmetric oxygen transporting BSCF membranes
Hoffmann, Robert; Pippardt, Ute; Kriegel, Ralf | Zeitschriftenaufsatz |
| 2019 | Improved SH0 Guided Wave Transducers Based on Piezoelectric Fiber Patches
Kim, Yongtak; Gaul, Tobias; Köhler, Bernd | Zeitschriftenaufsatz |
| 2019 | In situ neutron diffraction studies on poling of the hard PZT ceramic PIC181
Eßlinger, Sophia; Neumeister, Peter; Schönecker, Andreas; Hoffman, Mark John; Studer, Andrew; Hinterstein, Manuel | Zeitschriftenaufsatz |
| 2019 | In-situ processing and characterization of Fe-TiCN composite produced via enhanced carbonitrothermic reduction of low grade ilmenite concentrate
Mojisola, Tajudeen; Ramakokovhu, Munyadziwa Mercy; Räthel, Jan; Olubambi, Peter Apata; Matizamhuka, Wallace R. | Zeitschriftenaufsatz |
| 2019 | In-situ synthesis and characterization of Fe – TiC based cermet produced from enhanced carbothermally reduced ilmenite
Mojisola, Tajudeen; Ramakokovhu, Mercy Munyadziwa; Räthel, Jan; Olubambi, Peter Apata; Matizamhuka, Wallace R. | Zeitschriftenaufsatz |
| 2019 | Influence of ceramic granule properties on die filling behaviour
Glöß, Bianca; Fries, Manfred | Zeitschriftenaufsatz |
| 2019 | Influence of microstructure on hardness and thermal conductivity of hardmetals
Vornberger, Anne; Pötschke, Johannes; Gestrich, Tim; Herrmann, Mathias | Vortrag |
| 2019 | An insight into anodic dissolution processes of carbides obtained by product analysis
Simunkova, Lenka; Schneider, Michael; Michaelis, Alexander | Konferenzbeitrag |
| 2019 | Integration of piezoceramic composites into structural components: Effect on the polarisation state and polarisability
Hohlfeld, Kai; Eßlinger, Sophia; Eydam, Agnes; Winkler, Anja; Weber, Tony; Gude, Maik; Modler, Niels; Gerlach, Gerald; Suchaneck, Gunnar; Michaelis, Alexander; Schönecker, Andreas; Gebhardt, Andreas; Neumeister, Peter | Zeitschriftenaufsatz |
| 2019 | Integration of sensory-diagnostic and actuator therapeutic functions in implants
Lausch, Holger; Töppel, Thomas | Aufsatz in Buch |
| 2019 | Interaction of fiber matrix bonding in SiC/SiC ceramic matrix composites
Schönfeld, Katrin; Klemm, Hagen | Zeitschriftenaufsatz |
| 2019 | Investigation and optimization of Ni/NaCl granules for Na-NiCl2 high temperature batteries
Schüßler, Benjamin; Dirksen, Cornelius; Schulz, Matthias; Stelter, Michael | Abstract |
| 2019 | Investigation of the oxide film formed on solid-state sintered silicon carbide ceramics at high anodic potentials
Schneider, Michael; Simunkova, Lenka; Michaelis, Alexander; Noeske, Michael; Aniol, Jonas; Thiel, Karsten | Konferenzbeitrag |
| 2019 | Investigations on the effective electric loads in blended insertion electrodes for lithium-ion batteries
Liebmann, Tobias; Heubner, Christian; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2019 | Investigations on the reversible heat generation rates of blended Li-insertion electrodes
Liebmann, Tobias; Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2019 | Joining and mechanical testing of oxide/oxide (Nextel™ 610/alumina-zirconia) ceramic composites
Akram, Muhammad Yasir; Casalegno, Valentina; Ferraris, Monica; Puchas, Georg; Krenkel, Walter; Roszeitis, Sven | Zeitschriftenaufsatz |
| 2019 | Keramische Membranen in der Membrandestillation
Schnittger, Johann; Weyd, Marcus W.; Voigt, Ingolf; Lerch, André | Zeitschriftenaufsatz |
| 2019 | Keramische Multilagenspulen zur Anwendung in der Hochtemperaturelektronik
Bartsch, Heike; Müller, Jens; Capraro, Beate; Schabbel, Dirk; Reimann, Timmy; Töpfer, Jörg; Grund, Steffen | Konferenzbeitrag |
| 2019 | Kompakte Abfrageeinheit auf Basis einer Doppelphotodiode für die spektraloptische Sensorik
Wuchrer, Roland
: Härtling, Thomas (Betreuer); Gerlach, Gerald (Betreuer, Hrsg.) | Dissertation |
| 2019 | Laser speckle photometry - Optical sensor systems for condition and process monitoring
Chen, Lili; Cikalova, Ulana; Bendjus, Beatrice; Gommlich, Andreas; Sudip, Shohag Roy; Schott, Carolin; Steingroewer, Juliane; Belting, Matthias; Kleszczynski, Stefan | Zeitschriftenaufsatz |
| 2019 | Lattice Analysis by Synchrotron Powder Diffraction on High Voltage Spinel LiNi0.5Mn1.5O4
Seidel, Matthias; Nikolowski, Kristian; Auer, Henry; Kinski, Isabel; Wolter, Mareike; Mikhailova, Daria; Maletti, Sebastian; Michaelis, Alexander | Abstract |
| 2019 | Lattice Analysis by Synchrotron Powder Diffraction on High Voltage Spinel LNMO
Seidel, Matthias; Nikolowski, Kristian; Auer, Henry; Kinski, Isabel; Wolter, Mareike; Mikhailova, Daria; Maletti, Sebastian; Michaelis, Alexander | Poster |
| 2019 | LLZO separator sheets manufactured by a tape casting process and their electrochemical characterization
Hüttl, Juliane; Arnold, Michael; Nikolowski, Kristian; Görne, Arno Ludwig; Wolter, Mareike; Michaelis, Alexander | Poster |
| 2019 | Messsensor zum Bestimmen von Eigenspannungen an oder in einem zu untersuchenden Bauteil
Brosius, David Maximilian; Cikalova, Ulana; Funke, Hendrik; Hillmann, Susanne | Patent |
| 2019 | Methode für den Vorhalt von inhomogenen Schwindungen im Entwurfsprozess von LTCC-Mikrosystemen
Lenz, Christian; Strach, Nicole; Ziesche, Steffen; Partsch, Uwe; Michaelis, Alexander | Konferenzbeitrag |
| 2019 | Methodology for correlation of porosity and mechanical properties of silver sintered joints in electronics
Metasch, René; Röllig, Mike; Knoch, Philip; Weinmann, Christian; Meier, Karsten | Konferenzbeitrag |
| 2019 | Microstructural control of a SSZ-13 zeolite film via rapid thermal processing
Kim, Jinseong; Jang, Eunhee; Hong, Sungwon; Kim, Dongjae; Kim, Eunjoo; Richter, Hannes; Simon, Adrian; Choi, Nakwon; Korelskiy, Danil; Fouladvand, Shahpar; Nam, Jaewook; Choi, Jungkyu | Zeitschriftenaufsatz |
| 2019 | Miniaturisiertes, batterieloses Sensorsystem zur Steckzyklenzählung an Verbindungskomponenten
Augustin, Jörn; Klesse, Thomas; Neumeister, Peter; Oemus, Martin; Schubert, Lars; Schiefelbein, Frank-Peter | Konferenzbeitrag |
| 2019 | Model-based examination of an optimal use of carbon-based energy carriers in an integrated steel mill through integration of a direct reduction plant
Müller, Nils; Herz, Gregor; Reichelt, Erik; Jahn, Matthias | Konferenzbeitrag |
| 2019 | Modeling and sizing of a TEG with half-heusler TE legs for reducing fuel consumption in a heavy duty vehicle
Contet, A.; Lhomme, C.; Zuckermann, D.; Fey, A.; Rouaud, C.; Cimen, T.; Rabanser, P.; Rost, A.; Trache, M.; Feng, B. | Bericht |
| 2019 | Molecular engineering of conjugated acetylenic polymers for efficient cocatalyst-free photoelectrochemical water reduction
Sun, Hanjun; Öner, Ibrahim Halil; Wang, Tao; Zhang, Tao; Selyshchev, Oleksandr; Neumann, Christof; Fu, Yubin; Liao, Zhongquan; Xu, Shunqi; Hou, Yang; Turchanin, Andrey; Zahn, Dietrich R.T.; Zschech, Ehrenfried; Weidinger, Inez M.; Zhang, Jian; Feng, Xinliang | Zeitschriftenaufsatz |
| 2019 | Monitoring of compressor operations - A machine learning approach
Holstein, Peter; Moeck, Steffen; Tschöpe, Constanze; Duckhorn, Frank; Kolbe, Peter; Hennecke, Michael | Konferenzbeitrag |
| 2019 | Monolithic Ceramic IR-Emitter in Multilayer Technology
Goldberg, Adrian; Manhica, Birgit; Ziesche, Steffen | Konferenzbeitrag |
| 2019 | Multi-material Ceramic-Based Components - Additive Manufacturing of Black-and-white Zirconia Components by Thermoplastic 3D-Printing (CerAM - T3DP)
Weingarten, Steven; Scheithauer, Uwe; Johne, Robert; Abel, Johannes; Schwarzer, Eric; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2019 | Multi-sensor high-frequency eddy current depth detection in carbon fiber reinforced polymers
Matvieieva, Nataliia; Schulze, Martin H.; Chen, Lili; Patsora, Iryna V.; Heuer, Henning | Konferenzbeitrag |
| 2019 | Multimaterial components by material extrusion-fused filament fabrication (ME-FFF) - Production of an infrared heater
Kukla, Christian; Cano, Santiago; Moritz, Tassilo; Müller-Köhn, Axel; Courtney, P.; Hampel, Stefan; Holzer, Clemens | Zeitschriftenaufsatz |
| 2019 | Neue hoch verschleißfeste Metallguss-Keramik-Verbundwerkstoffe
Standke, Gisela | Zeitschriftenaufsatz |
| 2019 | Non-destructive investigations of pore morphology of micropore carbon materials
Stec, Jakub; Tarasiuk, Jacek; Nagy, Stanislaw; Smulski, Rafal; Gluch, Jürgen; Filipek, Robert | Zeitschriftenaufsatz |
| 2019 | Non-destructive weld inspection during the welding process - possibilities and limitations of an inline monitoring approach
Schubert, Frank; Bendjus, Beatrice; Cikalova, Ulana; Stephan, Mareike; Hipp, Raffael; Schulze, Eberhard; Barth, Martin; Bor, Zsolt; Heuer, Henning | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2019 | A novel model for pyro-electro-catalytic hydrogen production in pure water
Schlechtweg, Julian; Raufeisen, Sascha; Stelter, Michael; Bräutigam, Patrick | Zeitschriftenaufsatz |
| 2019 | Numerical and experimental study of the spatial stress distribution on the cornea surface during a non-contact tonometry examination
Münch, Stefan; Röllig, Mike; Spörl, Eberhard; Balzani, Daniel | Zeitschriftenaufsatz |
| 2019 | Numerical study on the influence of material models for tin-based solder alloys on reliability statements
Metasch, René; Schwerz, Robert; Meier, K.; Röllig, Mike | Konferenzbeitrag |
| 2019 | On-turbine multisensors based on hybrid ceramic manufacturing technology
Ziesche, Steffen; Goldberg, Adrian; Partsch, Uwe; Kappert, Holger; Kind, Heidrun; Aden, Mirko; Naumann, Falk | Konferenzbeitrag, Zeitschriftenaufsatz |
| 2019 | Onlinefähige Signalauswertung für spektraloptische Sensoren mit einer Doppelphotodiode
Wuchrer, Roland; Härtling, Thomas; Gerlach, Gerald | Zeitschriftenaufsatz |
| 2019 | Operation experience with a novel highly efficient micro-scale CHP system based on fuel-flexible gasification and a SOFC
Obernberger, Ingwald; Brunner, T.; Ramerstorfer, C.; Kerschbaum, M.; Aravind, P.V.; Makkus, R.; Megel, Stefan; Hauth, Martin; Weissensteiner, S. | Konferenzbeitrag |
| 2019 | Operation of a SOFC CHP system with wood gas from a fixed-bed updraft gasifier
Weißensteiner, Stefan; Hauth, Martin; Seidl, Michael; Soukup, Nikolaus; Sallai, Christopher; Obernberger, Ingwald; Brunner, Thomas; Ramerstorfer, Christian; Megel, Stefan; Schnetter, Jens | Konferenzbeitrag |
| 2019 | Optical and Electrical Signal Transduction by Nanoplasmonic Structures for Emerging Sensing and Device Applications
Lee, Jihye
: Yeo, Jong-Souk (Thesis Supervisor); Kwon, Jang-Yeon (Thesis Committee Member); Kim, Jiwon (Thesis Committee Member); Altug, Hatice (Thesis Committee Member); Opitz, Jörg (Thesis Committee Member) | Dissertation |
| 2019 | Optimization of selectivity towards higher alcohols for iron-based Fischer-Tropsch catalysts
Wolke, Florian; Schaller, Max Rudolf; Dehmelt, Tom; Reichelt, Erik; Jahn, Matthias | Konferenzbeitrag |
| 2019 | Plasmonic sensor for on-site detection of diclofenac molecules
Steinke, Nadja; Döring, Sarah; Wuchrer, Roland; Kroh, Christoph; Gerlach, Gerald; Härtling, Thomas | Zeitschriftenaufsatz |
| 2019 | Polymer brushes on hexagonal boron nitride
Sheng, Wenbo; Amin, Ihsan; Neumann, Christof; Dong, Renhao; Zhang, Tao; Wegener, Erik; Chen, Wei-Liang; Förster, Paul; Tran, Hai Quang; Löffler, Markus; Winter, Andreas; Rodriguez, Raul D.; Zschech, Ehrenfried; Ober, Christopher K.; Feng, Xinliang; Turchanin, Andrey; Jordan, Rainer | Zeitschriftenaufsatz |
| 2019 | Potentials and challenges of additive manufacturing technologies for heat exchanger
Scheithauer, Uwe; Kordaß, Richard; Noack, Kevin; Eichenauer, Martin F.; Hartmann, Mathias; Abel, Johannes; Ganzer, Gregor; Lordick, Daniel | Aufsatz in Buch |
| 2019 | Powder based and suspension based additive manufacturing of hardmetal
Berger, Christian; Pötschke, Johannes; Abel, Johannes; Richter, Hans-Jürgen; Scheithauer, Uwe; Weingarten, Steven; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2019 | PrintPOWER - Paste systems for multifunctional copper power modules
Reinhardt, Kathrin; Körner, Stefan; Partsch, Uwe | Konferenzbeitrag |
| 2019 | Process development for additive manufacturing of functionally graded alumina toughened zirconia components intended for medical implant application
Schwarzer, Eric; Holtzhausen, Stefan; Scheithauer, Uwe; Ortmann, Claudia; Oberbach, Thomas; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2019 | Quantitative analysis of BMP-2 derived peptides covalently grafted to oxidized detonation nanodiamonds
Balakin, Sascha; Missirlis, Athanassios; Klemmed, Benjamin; Lee, Jihye; Opitz, Jörg; Yeo, Jong-Souk; Cuniberti, Gianaurelio | Zeitschriftenaufsatz |
| 2019 | Quantitative elucidation of the elusive role of defects in polycrystalline MFI zeolite membranes on xylene separation performance
Hong, Sungwon; Kim, Dongjae; Richter, Hannes; Moon, Jong Ho; Choi, Nakwon; Nam, Jaewook; Choi, Jungkyu | Zeitschriftenaufsatz |
| 2019 | Rapid screening of CO oxidation catalysts using optical calorimetry
Wegner, Karl; Wöllner, Michelle; Zippel, Rene; Medicus, Maximilian; Schade, Elke; Grothe, Julia; Kaskel, Stefan | Zeitschriftenaufsatz |
| 2019 | Report on SOP for dispersing nanomaterials in water and report on round robin test
Potthoff, Annegret; Unger, Wolfgang | Bericht |
| 2019 | Scale-up of ceramic nanofiltration membranes to meet large scale applications
Voigt, Ingolf; Richter, Hannes; Stahn, Michael; Weyd, Marcus; Puhlfürß, Petra; Prehn, Volker; Günther, Christiane | Zeitschriftenaufsatz |
| 2019 | A semiconducting layered metal-organic framework magnet
Yang, Chongqing; Dong, Renhao; Wang, Mao; Petkov, Petko S.; Zhang, Zhitao; Wang, Mingchao; Han, Peng; Ballabio, Marco; Bräuninger, Sascha A.; Liao, Zhongquan; Zhang, Jichao; Schwotzer, Friedrich; Zschech, Ehrenfried; Klauss, Hans-Henning; Canovas, Enrique; Kaskel, Stefan; Bonn, Mischa; Zhou, Shengqiang; Heine, Thomas; Feng, Xinliang | Zeitschriftenaufsatz |
| 2019 | SHM using guided waves - Recent activities and advances in Germany
Mueller, Inka; Moll, Jochen; Tschöke, Kilian; Prager, Jens; Kexel, Christian; Schubert, Lars; Lugovtsova, Yevgeniya; Bach, Martin; Vogt, Thomas | Konferenzbeitrag |
| 2019 | Simulationsgestützte Modellierung der elastischen Eigenschaften mikrorissbehafteter Materialien und deren nichtlineare Wechselwirkung mit geführten Wellen
Rjelka, Marek
: Köhler, Bernd (Betreuer); Kühnicke, Elfgard (Betreuender Hochschullehrer); Mayer, Andreas (Gutachter) | Dissertation |
| 2019 | Sol-gel method for synthesis of Li+-stabilized Na-β”-alumina for solid electrolytes in sodium-based batteries
Augustina, Anisa Isabella; Skadell, Karl; Dirksen, Cornelius; Kusumocahyo, Samuel P. | Konferenzbeitrag |
| 2019 | Stress Characterization of Ceramic Substrates by Laser Speckle Photometry
Chen, Lili; Cikalova, Ulana; Münch, Stefan; Röllig, Mike; Bendjus, Beatrice | Konferenzbeitrag |
| 2019 | Structural features and nitrogen positions in titanium oxynitride films grown in plasma of magnetron discharge
Pichugin, Vladimir F.; Pustovalova, Alla A.; Evdokimov, Kirill E.; Konishchev, M.E.; Kuzmin, Oleg S.; Boytsova, E.L.; Beshchasna, Natalia; Ficai, Anton; Aubakirova, D.M.; Sun, Zhilei | Konferenzbeitrag |
| 2019 | Surface evaluation of titanium oxynitride coatings used for developing layered cardiovascular stents
Beshchasna, Nataliia; Kwan Ho, Au Yeung; Saqib, Muhammad; Kraśkiewicz, Honorata; Wasyluk, Łukasz; Kuzmin, Oleg; Duta, Oana; Ficai, Denisa; Trusca, Roxana; Ficai, Anton; Pichugin, Vladimir F.; Opitz, Jörg; Andronescu, Ecaterina | Zeitschriftenaufsatz |
| 2019 | Techno-economic analysis of a highly integrated Power-to-liquid process
Rix, Christopher; Herz, Gregor; Reichelt, Erik; Jahn, Matthias | Konferenzbeitrag |
| 2019 | Thermoplastic 3D Printing of Hardmetals
Pötschke, Johannes; Weingarten, Steven; Scheithauer, Uwe; Mayer, Markus | Konferenzbeitrag |
| 2019 | Three-dimensional structural comparison of tantalum glancing angle deposition thin films by FIB-SEM
Ott, Tobias; Roldan, Diego; Redenbach, Claudia; Schladitz, Katja; Godehardt, Michael; Höhn, Sören | Zeitschriftenaufsatz |
| 2019 | Through interface optimization to new generation of robust electrolyte supported cell with high power density
Trofimenko, Nikolai; Kusnezoff, Mihails; Mosch, Sindy; Michaelis, Alexander | Konferenzbeitrag |
| 2019 | Towards Actuation Improvement of Low-profile Piezo Fibre Composites by Notched Electrodes
Hohlfeld, Kai; Neumeister, Peter; Michaelis, Alexander; Gebhardt, Sylvia | Zeitschriftenaufsatz |
| 2019 | Towards reconfigurable electronics: Silicidation of top-down fabricated silicon nanowires
Khan, Muhammad Bilal; Deb, Dipjyoti; Kerbusch, Jochen; Fuchs, Florian; Löffler, Markus; Banerjee, Sayanti; Mühle, Uwe; Weber, Walter Michael; Gemming, Sibylle; Schuster, Jörg; Erbe, Artur; Georgiev, Yordan M. | Zeitschriftenaufsatz |
| 2019 | Treatment of oily and salty mining water by ceramic nanofiltration membranes
Voigt, Ingolf; Richter, Hannes; Weyd, Marcus W.; Milew, Kerstin; Haseneder, Roland; Günther, Christiane; Prehn, Volker | Zeitschriftenaufsatz |
| 2019 | Tungsten carbide nanoparticles show a broad spectrum virucidal activity against enveloped and nonenveloped model viruses using a guideline-standardized in vitro test
Pfaff, Florian; Glück, Brigitte; Hoyer, Thomas; Rohländer, David G.; Sauerbrei, Andreas; Zell, Roland | Zeitschriftenaufsatz |
| 2019 | Ultrasonic dual element probes revisited - complex wave phenomena as a basis for transducer design and optimization
Schubert, Frank; Herzog, Thomas; Walter, Susan; Heuer, Henning | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2019 | Understanding Thickness and Porosity Effects on the Electrochemical Performance of LiNi0.6Co0.2Mn0.2O2-based Cathodes for High Energy Li-Ion Batteries
Heubner, Christian; Nickol, Alexander; Seeba, Jann; Reuber, Sebastian; Junker, Nils; Wolter, Mareike; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2019 | Unlimited colors - Glass powder injection moulding
Mannschatz, Anne; Rost, Axel; Müller-Köhn, Axel; Schilm, Jochen; Moritz, Tassilo; Jegust, Stephan; Witzleben, Moritz von | Zeitschriftenaufsatz |
| 2019 | Using of zeolite NaA membranes for improved glycol dewatering in a pilot plant for natural gas drying
Lubenau, U.; Mothes, R.; Worch, D.; Kühnert, J.T.; Weyd, M.; Richter, H.; Simon, L.; Neuhaus, G. | Konferenzbeitrag |
| 2019 | Vorrichtung und Verfahren zur Herstellung eines Zeoliths
Hoffmann, Claudia; Ommer, Matthias; Philipp, Janet; Richter, Hannes | Patent |
| 2019 | Vorrichtung zur Bestimmung der Ermüdung von Proben, die einer thermo-mechanischen Wechselbeanspruchung ausgesetzt werden
Metasch, René; Röllig, Mike; Naumann, Uwe; Kaufmann, Rainer; Wiesenhütter, Felix | Patent |
| 2019 | Wavelength dependent laser material processing of ceramic materials
Polenz, Stefan; Seidel, André; Moritz, Juliane; Kunz, Willy; Riede, Mirko; Lopez, Elena; Brückner, Frank; Leyens, Christoph | Zeitschriftenaufsatz |
| 2019 | Wellenlängenabhängige Herstellung keramischer Werkstoffe für Luft- und Raumfahrtanwendungen mittels Lasertechnologie
Polenz, Stefan; Kunz, Willy; Rößler, Marco; Lopez, Elena; Brückner, Frank; Leyens, Christoph | Konferenzbeitrag |
| 2019 | X-ray characterization of morphology and structure of materials at multiple length scales
Zschech, Ehrenfried | Abstract |
| 2019 | Zerstörungsfreie Prüfung metallischer Überlappschweißverbindungen in Lithium-Ionen-Batterien mit Fokus auf die optisch angeregte Infrarotthermografie
Just, Philipp
: Meyendorf, Norbert (Betreuer, Hochschullehrer); Mücklich, Silke (Gutachter) | Dissertation |
| 2019 | Zu belüftende Extrusionsvorrichtung zur Herstellung eines mit einem Boden verschlossenen Keramikrohres
Hofacker, Martin; Kiesel, Lutz | Patent |
| 2019 | Zusammenhänge zwischen rheologischen Eigenschaften und der Abscheidbarkeit keramischer Suspensionen
Reinhardt, Kathrin
: Michaelis, Alexander (Gutachter); Feller, Jörg (Gutachter) | Dissertation |
| 2019 | Zustandsüberwachung an Rotorblättern von Windkraftanlagen mittels Schallemissionsanalyse
Schubert, Lars; Schulze, Eberhard; Weihnacht, Bianca; Henker, Tobias; Frankenstein, Bernd | Konferenzbeitrag |
| 2018 | 30 nm X-ray focusing correlates oscillatory stress, texture and structural defect gradients across multilayered TiN-SiOx thin film
Keckes, Jozef; Daniel, Rostislav; Todt, Juraj; Zalesak, Jakub; Sartory, Bernhard; Braun, Stefan; Gluch, Jürgen; Rosenthal, Martin; Burghammer, Manfred; Mitterer, C.; Niese, S.; Kubec, Adam | Zeitschriftenaufsatz |
| 2018 | 3D Multilayered Ceramics - harsh environment interposer technologies expand into 3rd dimension
Ziesche, Steffen; Lenz, Christian; Müller-Köhn, Axel; Scheithauer, Uwe; Partsch, Uwe | Konferenzbeitrag |
| 2018 | 3D-cathode design with foam-like aluminum current collector for high energy density lithium-ion batteries
Fritsch, Marco; Standke, Gisela; Heubner, Christian; Langklotz, Ulrike; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | 57Fe Mössbauer study into oxygen vacancy disorder in (Ba0.5Sr0.5)(Co0.8Fe0.2)O3−δ
Gaczynski, Piotr; Harpf, Anja; Böer, Jürgen; Kircheisen, Robert; Kriegel, Ralf; Becker, Klaus-Dieter | Zeitschriftenaufsatz |
| 2018 | Additive Manufacturing of ceramic heat exchanger. Opportunities and limits of the Lithography-based Ceramic Manufacturing (LCM)
Scheithauer, Uwe; Schwarzer, Eric; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | Advanced methods in NDE using machine learning approaches
Wunderlich, Christian; Tschöpe, Constanze; Duckhorn, Frank | Konferenzbeitrag |
| 2018 | Analysis of 28 nm SRAM cell stability under mechanical load applied by nanoindentation
Clausner, André; Schlipf, Simon; Kurz, G.; Otto, M.; Paul, J.; Giering, Kay-Uwe; Warmuth, Jens; Lange, André; Jancke, Roland; Aal, A.; Rosenkranz, Rüdiger; Gall, Martin; Zschech, Ehrenfried | Konferenzbeitrag |
| 2018 | Analysis of electromigration-induced backflow stresses in Cu(Mn) interconnects using high statistical sampling
Kraatz, Matthias; Sander, Christoph; Clausner, André; Hauschildt, M.; Standke, Yvonne; Gall, Martin; Zschech, Ehrenfried | Konferenzbeitrag |
| 2018 | Analysis of the 3D draping behavior of carbon fiber non-crimp fabrics with eddy current technique
Bardl, Georg; Nocke, Andreas; Hübner, Matthias; Gereke, Thomas; Pooch, Matthias; Schulze, Martin; Heuer, Henning; Schiller, Marko; Kupke, Richard; Klein, Marcus; Cherif, Chokri | Zeitschriftenaufsatz |
| 2018 | Anode für eine elektrochemische Zelle sowie ein Verfahren zur Herstellung einer elektrochemischen Zelle mit einer solchen Anode
Kusnezoff, Mihails; Trofimenko, Nikolai | Patent |
| 2018 | Automatisierte zerstörungsfreie Prüfung des Füllgrades von Falzverklebungen mittels Phased Array Ultraschall
Klausing, Maximilian; Cusenza, Salvatore; Heuer, Henning | Konferenzbeitrag |
| 2018 | Ein autonomer Flammenionisationsdetektor zur Emissionsüberwachung
Förster, Jan; Koch, Christian; Kuipers, Winfred; Lenz, Christian; Ziesche, Steffen | Konferenzbeitrag |
| 2018 | BaZrxTi1-xO3 epitaxial thin films for electrocaloric investigations
Engelhardt, Stefan; Molin, Christian; Gebhardt, Sylvia; Fähler, Sebastian; Nielsch, Kornelius; Hühne, Ruben | Zeitschriftenaufsatz |
| 2018 | Beiträge zur chemisch-biologischen Oberflächenmodifikation von Nanodiamanten aus der Detonationssynthese
Pohl, Andrea
: Bley, Thomas (Gutachter); Krueger, Anke (Gutachter); Opitz, Jörg (Betreuer) | Dissertation |
| 2018 | Berechnung von Laufzeit- und Amplitudenverteilung durch simultane Lösung der Eikonal- und Transportgleichung mittels einer adaptierten Fast-Marching-Methode
Neubeck, Robert; Buske, Stefan; Schubert, Lars | Vortrag |
| 2018 | Binding energy referencing for XPS in alkali metal-based battery materials research (II): Application to complex composite electrodes
Oswald, Steffen; Thoss, Franziska; Zier, Martin; Hoffmann, Martin; Jaumann, Tony; Herklotz, Markus; Nikolowski, Kristian; Scheiba, Frieder; Kohl, Michael; Giebeler, Lars; Mikhailova, Daria; Ehrenberg, Helmut | Zeitschriftenaufsatz |
| 2018 | Biomechanical, biochemical, and cell biological evaluation of different collagen scaffolds for tendon augmentation
Gabler, Carolin; Spohn, Juliane; Tischer, Thomas; Bader, Rainer | Zeitschriftenaufsatz |
| 2018 | CerAMfacturing. Development of ceramic and multi-material components by additive manufacturing methods for personalized medical products
Scheithauer, Uwe; Johne, Robert; Weingarten, Steven; Schwarzer, Eric; Abel, Johannes; Müller-Köhn, Axel; Günther, Anne; Moritz, Tassilo | Zeitschriftenaufsatz |
| 2018 | Ceramic-supported thin film composite membrane for organic solvent nanofiltration
Xia, Lingling; Ren, Jian; Weyd, Marcus; McCutcheon, Jeffrey R. | Zeitschriftenaufsatz |
| 2018 | Characterization of spatial distribution of electrolyte in molten carbonate fuel cell cathodes
Wejrzanowski, Tomasz; Gluch, Jürgen; Ibrahim, Samih Haj; Cwieka, Karol; Milewski, Jaroslaw; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2018 | CO2 Emission Reduction Potential in the Steel Industry by Integration of a Direct Reduction Process into Existing Steel Mills
Müller, Nils; Herz, Gregor; Reichelt, Erik; Jahn, Matthias | Konferenzbeitrag |
| 2018 | Cobalt-based metal-organic framework nanoarrays as bifunctional oxygen electrocatalysts for rechargeable Zn-air batteries
Chen, Guangbo; Zhang, Jian; Wang, Faxing; Wang, Lanlan; Liao, Zhongquan; Zschech, Ehrenfried; Müllen, Klaus; Feng, Xinliang | Zeitschriftenaufsatz |
| 2018 | A cognitive user interface for a multi-modal human-machine interaction
Tschöpe, Constanze; Duckhorn, Frank; Huber, Markus; Meyer, Werner; Wolff, Matthias | Konferenzbeitrag |
| 2018 | Combination of soft X-ray microscopy with in-situ mechanical testing to image crack propagation in microchips
Kutukova, Kristina; Liao, Zhongquan; Werner, Stephan; Guttmann, Peter; Standke, Yvonne; Gluch, Jürgen; Schneider, Gerd; Zschech, Ehrenfried | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2018 | Compact LTCC Packaging and Printing Technologies for Sub-THz Modules
Ihle, Martin; Ziesche, Steffen; Zech, Christian; Baumann, Benjamin | Konferenzbeitrag |
| 2018 | Comparative study of corrosion performance of HVOF-sprayed coatings produced using conventional and suspension WC-Co feedstock
Ahmed, Rehan R.; Vourlias, George; Algoburi, A.; Vogiatzis, C.; Chaliampalias, D.; Skolianos, S.; Berger, Lutz-Michael; Paul, S.; Faisal, Nadimul; Toma, Filofteia-Laura; Al-Anazi, Nayef; Goosen, M.F.A. | Zeitschriftenaufsatz |
| 2018 | Comparison of chronoamperometric response and rate-performance of porous insertion electrodes: Towards an accelerated rate capability test
Heubner, Christian; Lämmel, Christoph; Nickol, Alexander; Liebmann, Tobias; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | A continuum model for sintering processes incorporating elasticity effects
Stark, Sebastian; Neumeister, Peter | Zeitschriftenaufsatz |
| 2018 | Copper-surface-mediated synthesis of acetylenic carbon-rich nanofibers for active metal-free photocathodes
Zhang, Tao; Hou, Yang; Dzhagan, Volodymyr M.; Liao, Zhongquan; Chai, Guoliang; Löffler, Markus; Olianas, Davide; Milani, Alberto; Xu, Shunqi; Tommasini, Matteo; Zahn, Dietrich R.T.; Zheng, Zhikun; Zschech, Ehrenfried; Jordan, Rainer Andreas; Feng, Xinliang | Zeitschriftenaufsatz |
| 2018 | A coronene-based semiconducting two-dimensional metal-organic framework with ferromagnetic behavior
Dong, Renhao; Zhang, Zhitao; Tranca, Diana C.; Zhou, Shengqiang; Wang, Mingchao; Adler, Peter; Liao, Zhongquan; Liu, Feng; Sun, Yan; Shi, Wujun; Zhang, Zhe; Zschech, Ehrenfried; Mannsfeld, Stefan C.B.; Felser, Claudia; Feng, Xinliang | Zeitschriftenaufsatz |
| 2018 | Corrosion resistance of silicon-infiltrated silicon carbide (SiSiC)
Striegler, Maria; Matthey, Björn; Mühle, Uwe; Michaelis, Alexander; Herrmann, Mathias | Zeitschriftenaufsatz |
| 2018 | Data-driven fatigue crack quantification and prognosis using nonlinear ultrasonic modulation
Lim, Hyung Jin; Sohn, Hoon; Kim, Yongtak | Zeitschriftenaufsatz |
| 2018 | Deconvolution of cyclic voltammograms of blended lithium insertion compounds by using a model-like blend electrode
Heubner, Christian; Liebmann, Tobias; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | Defect detection during laser welding by Laser Speckle Photometry
Cikalova, Ulana; Bendjus, Beatrice; Stüwe, Tobias; Reyes de Acosta, Ruth Veronica | Konferenzbeitrag |
| 2018 | A delamination strategy for thinly layered defect-free high-mobility black phosphorus flakes
Yang, Sheng; Zhang, Ke; Ricciardulli, Antonio Gaetano; Zhang, Panpan; Liao, Zhongquan; Lohe, Martin R.; Zschech, Ehrenfried; Blom, Paul W.M.; Pisula, Wojciech; Müllen, Klaus; Feng, Xinliang | Zeitschriftenaufsatz |
| 2018 | Deriving the Principles of the Freeze Foaming Process by CT evaluation of Cellular Bioceramics
Ahlhelm, Matthias; Werner, David; Kaube, Nils; Maier, Johanna; Abel, Johannes; Behnisch, Thomas; Moritz, Tassilo; Michaelis, Alexander; Gude, Maik | Zeitschriftenaufsatz |
| 2018 | Desorption and electrical conductivity studies of indium tin oxide powders and thick films
Dietrich, Stefan; Kusnezoff, Mihails | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2018 | Detection of diclofenac molecules by planar and nanostructured plasmonic sensor substrates
Steinke, Nadja; Rio, Marisa; Wuchrer, Roland; Schuster, Christiane; Ljasenko, Evgenij; Knopp, Dietmar; Gerlach, Gerald; Härtling, Thomas | Zeitschriftenaufsatz |
| 2018 | Development and analysis of high temperature stable interconnections on thick films using micro resistance welding for sensors and MEMS
Gierth, Paul; Rebenklau, Lars | Konferenzbeitrag |
| 2018 | Development and application of a SimulationX library for magnetic shape memory alloys
Effner, Annabell; Zawada, Tobias; Ehle, Fabian; Neubert, Holger; Weber, Jürgen | Konferenzbeitrag |
| 2018 | Development and application of binary suspensions in the ternary system Cr2O3-TiO2-Al2O3 for S-HVOF spraying
Potthoff, Annegret; Kratzsch, Robert; Barbosa, Maria M.; Kulissa, Nick; Kunze, Oliver; Toma, Filofteia-Laura | Zeitschriftenaufsatz |
| 2018 | Development of a new highly efficient and fuel flexible medium-scale CHP technology based on fixed-bed updraft biomass gasification and a SOFC
Brunner, Thomas; Biedermann, Friedrich; Obernberger, Ingwald; Hirscher, Simon; Schöch, Martin; Milito, Claudio; Leibold, Hans; Sitzmann, Jürgen; Megel, Stefan; Hauth, Martin; Vos, Yves de; Götz, Thomas; Shen, Li; Corona, Blanca | Konferenzbeitrag |
| 2018 | Development of single-fiber piezocomposite transducers for 3D ultrasound computer tomography
Zapf, Michael; Hohlfeld, Kai; Ruiter, Nicole V.; Pfistner, Patrick; Dongen, Koen W.A. van; Gemmeke, Hartmut; Michaelis, Alexander; Gebhardt, Sylvia | Zeitschriftenaufsatz |
| 2018 | Developments for highly reliable electronics - experiments on combined thermal and vibration loading
Meier, Karsten; Röllig, Mike; Bock, Karlheinz | Konferenzbeitrag |
| 2018 | Dielektrisches Element sowie ein Verfahren zur Herstellung
Greiner, Anna; Neubert, Holger; Neumeister, Peter | Patent |
| 2018 | Direct measurement of the electrocaloric temperature change in multilayer ceramic components by resistance-welded thermocouple wires
Greiner, Anna; Molin, Christian; Neubert, Holger; Gebhardt, Sylvia; Neumeister, Peter | Zeitschriftenaufsatz |
| 2018 | Dynamic in vitro microfluidic system for standardised osteoimmunological evaluation of implant materials
Ißleib, Constantin; Kuhlmeier, Dirk; Spohn, Juliane | Poster |
| 2018 | Eddy current testing in CFRP production
Bardl, Georg; Kupke, Richard; Heuer, Henning; Cherif, Chokri | Zeitschriftenaufsatz |
| 2018 | Effect of TiB2 nano-inclusions on the thermoelectric properties of boron rich boron carbide
Ponnusamy, Prasanna; Feng, Bing; Martin, Hans-Peter; Groen, Pim | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2018 | Einflüsse von Prozessparametern auf das Gefüge und das Korrosionsverhalten von Metall-Keramik-Werkstoffverbunden
Günther, Anne
: Aneziris, Christos G. (Gutachter); Michaelis, Alexander (Gutachter) | Dissertation |
| 2018 | Electrochemical characterization of a CFY-stack with planar electrolyte-supported solid oxide cells in rSOC operation
Preininger, Michael; Subotić, Vanja; Stoeckl, Bernhard; Schauperl, Richard; Reichholf, David; Megel, Stefan; Kusnezoff, Mihails; Hochenauer, Christoph | Zeitschriftenaufsatz |
| 2018 | Electrochemical deposition of reactive material systems for assembly and packaging applications
Hertel, Silvia; Schulte, Wiebke; Weiser, Mathias; Becker, Mike; Wiemer, Maik; Otto, Thomas | Konferenzbeitrag |
| 2018 | Electrochemical machining of tungsten carbide
Schubert, Nora; Schneider, Michael; Michaelis, Alexander; Manko, Michal; Lohrengel, Manuel M. | Zeitschriftenaufsatz |
| 2018 | Enhancement of hardness in niobium carbide composites
Pötschke, J.; Vornberger, A.; Berger, C. | Konferenzbeitrag |
| 2018 | Entwicklung angepasster Simulationsmodelle für Methoden der Zustandsüberwachung basierend auf geführten Wellen
Tschöke, Kilian; Gaul, Tobias | Vortrag |
| 2018 | Entwicklung und Charakterisierung von LTCC/Piezokeramik-Modulen für adaptive Strukturkomponenten
Flössel, Markus
: Michaelis, Alexander (Gutachter); Drossel, Welf-Guntram (Gutachter); Gebhardt, Sylvia (Betreuer) | Dissertation |
| 2018 | Entwicklung von miniaturisierten Dickschicht-Thermoelement-Arrays für automobile und industrielle Anwendungen
Gierth, Paul; Rebenklau, Lars; Bachmann, Eric; Niedermeyer, Lars; Augsburg, Klaus | Konferenzbeitrag |
| 2018 | Erratum to "Semi-empirical master curve concept describing the rate capability of lithium insertion electrodes" [J. Power Sources 380 (2018) 83-91]
Heubner, Christian; Seeba, Jann; Liebmann, Tobias; Nickol, Alexander; Börner, Stefan; Fritsch, Marco; Nikolowski, Kristian; Wolter, Mareike; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | Evaluation of Nanoparticle Inks on Flexible and Stretchable Substrates for Biocompatible Application
Schubert, Martin; Rebohle, Lars; Wang, Yakun; Fritsch, Marco; Bock, Karlheinz; Vinnichenko, Mykola; Schumann, Thomas | Konferenzbeitrag |
| 2018 | Evaluation of the pH-sensitive swelling of a hydrogel by means of a plasmonic sensor substrate
Kroh, Christoph; Wuchrer, Roland; Günther, Margarita; Härtling, Thomas; Gerlach, Gerald | Zeitschriftenaufsatz |
| 2018 | Evaluation of the pore morphology formation of the Freeze Foaming process by in situ computed tomography
Ahlhelm, Matthias; Werner, David; Maier, Johanna; Abel, Johannes; Behnisch, Thomas; Moritz, Tassilo; Michaelis, Alexander; Gude, Maik | Zeitschriftenaufsatz |
| 2018 | Experimental determination of the Young's modulus of copper and solder materials for electronic packaging
Krämer, Frank; Röllig, Mike; Metasch, René; Ahmar, Joseph Al; Meier, Karsten; Wiese, Steffen | Zeitschriftenaufsatz |
| 2018 | Experimental evaluation of volumetric solar absorbers - ceramic foam vs. an innovative rotary disc absorber concept
Zaversky, Fritz; Sánchez, Marcelino; Roldán, M. Isabel; Ávila-Marin, Antonio L.; Füssel, Alexander; Adler, Jörg; Knoch, Martin; Dreitz, Andreas | Konferenzbeitrag |
| 2018 | Experimental Verification of FE-Models for Thermo-Mechanical Loading using Digital Image Correlation
Schwerz, Robert; Metasch, René; Röllig, Mike; Wolter, Klaus-Jürgen | Konferenzbeitrag |
| 2018 | Fatigue measurement setup under combined thermal and vibration loading on electronic SMT assembly
Meier, K.; Metasch, R.; Roellig, M.; Bock, K. | Zeitschriftenaufsatz |
| 2018 | Flammenionisationsdetektor mit interner Gasversorgung in Mehrlagenkeramiktechnologie
Ziesche, Steffen; Lenz, Christian; Kuipers, Winfred; Förster, Jan; Koch, Christian | Konferenzbeitrag |
| 2018 | Flexible high-performance metallic interconnects prepared by innovative diode laser array treatment of inkjet-printed layers
Vinnichenko, Mykola; Fritsch, Marco; Xiao, Junchen; Makarov, Denys; Voitsekhivska, Tetiana; Sauchuk, Viktar; Kusnezoff, Mihails | Abstract |
| 2018 | FO-WLP multi-DOF inertial sensor for automotive applications
Kuisma, Heikki; Cardoso, Andre; Mäntyoja, Nikolai; Rosenkrantz, Rüdiger; Nurmi, Sami; Gall, Martin | Konferenzbeitrag |
| 2018 | Fraunhofer Institute for Ceramic Technologies and Systems. Annual Report 2017/2018
| Jahresbericht |
| 2018 | Fraunhofer-Institut für Keramische Technologien und Systeme. Jahresbericht 2017/2018
| Jahresbericht |
| 2018 | Füllverhalten, Schüttungszustand und resultierende Qualität keramischer Bauteile - Prozessführung und Prozessdesign von Matrizenfüllsystemen
Fries, Manfred; Kraft, T. | Bericht |
| 2018 | Functional integration - structure-integrated wireless sensor technology targeting smart mechanical engineering applications
Rülke, Steffen; Beyer, Volkhard; Zorn, Wolfgang; Meinig, Marco; Wecker, Julia; Reuter, Danny; Deicke, Frank; Clausner, André; Werner, Thomas | Konferenzbeitrag |
| 2018 | Gaskorrosion
Klemm, Hagen | Aufsatz in Buch |
| 2018 | Gassensitives Sensorelement
Dietrich, Stefan; Kusnezoff, Mihails | Patent |
| 2018 | Gating hysteresis as an indicator for silicon nanowire FET biosensor
Ibarlucea, Bergoi; Römhildt, Lotta; Zörgiebel, Felix; Pregl, Sebastian; Vahdatzadeh, Maryam; Weber, Walter M.; Mikolajick, Thomas; Opitz, Jörg; Baraban, Larysa; Cuniberti, Gianaurelio | Zeitschriftenaufsatz |
| 2018 | Generative Fertigung keramischer Bauteile
Scheithauer, Uwe; Richter, Hans-Jürgen | Aufsatz in Buch |
| 2018 | Glass ceramics sealants for SOFC interconnects based on a high chromium sinter alloy
Schilm, Jochen; Rost, Axel; Kusnezoff, Mihails; Megel, Stefan; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | Grain growth inhibition of hardmetals during initial heat-up
Pötschke, Johannes; Gestrich, Tim; Richter, Volkmar | Zeitschriftenaufsatz |
| 2018 | Hartmetallschichten - Historie und Perspektiven
Berger, Lutz-Michael | Konferenzbeitrag |
| 2018 | Hartstoffbeschichtete Körper aus Metall, Hartmetall, Cermet oder Keramik und Verfahren zur Herstellung derartiger Körper
Endler, Ingolf; Höhn, Mandy | Patent |
| 2018 | Heat development during the ECM of tungsten carbide
Schneider, Michael; Junker, Nils | Konferenzbeitrag |
| 2018 | Heat generation rates of NaFePO4 electrodes for sodium-ion batteries and LiFePO4 electrodes for lithium-ion batteries
Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | Heat haze effects in thermal chamber tensile tests on digital image correlation
Yuile, Adam; Schwerz, Robert; Röllig, Mike; Metasch, René; Wiese, Steffen | Konferenzbeitrag |
| 2018 | High-definition nanoimprint stamp fabrication by atomic layer etching
Khan, Sabbir A.; Suyatin, Dmitry B.; Sundqvist, Jonas; Graczyk, Mariusz; Junige, Marcel; Kauppinen, Christoffer; Kvennefors, Anders; Huffman, Maria; Maximov, Ivan | Zeitschriftenaufsatz |
| 2018 | Highly Efficient Production of Valuable Hydrocarbons from CO2 and H2O via an Integrated co-Electrolysis-Based Synthesis Process
Reichelt, Erik; Herz, Gregor; Schaller, Max Rudolf; Jahn, Matthias | Konferenzbeitrag |
| 2018 | How additive manufacturing can shape an industry 4.0 environment
Müller, Bernhard; Frieß, Uwe; Langer, Tino; Töppel, Thomas; Gebauer, Mathias; Klaeger, Uwe; Wollbrink, Moritz; Zöllner, Volker; Lausch, Holger | Vortrag |
| 2018 | Hybridization of materials and processes by additive manufacturing
Moritz, Tassilo; Scheithauer, Uwe; Weingarten, Steven; Abel, Johannes; Johne, Robert; Michaelis, Alexander; Hampel, Stefan; Cano, Santiago | Konferenzbeitrag |
| 2018 | Imitating the weathering of microplastics in the marine environment
Oelschlägel, Kathrin; Pfeiffer, Jenny; Potthoff, Annegret | Konferenzbeitrag |
| 2018 | Improving the high temperature abrasion resistance of thermally sprayed Cr3C2-NiCr coatings by WC addition
Janka, Leo; Berger, Lutz-Michael; Norpoth, Jonas; Trache, Richard; Thiele, Sven; Tomastik, Christian; Matikainen, Ville; Vuoristo, Petri | Zeitschriftenaufsatz |
| 2018 | In-situ X-ray microscopy of crack-propagation to study fracture mechanics of on-chip interconnect structures
Kutukova, Kristina; Liao, Zhongquan; Werner, Stephan; Guttmann, Peter; Standke, Yvonne; Gluch, Jürgen; Schneider, Gerd; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2018 | In-situ xrd-investigation of electrolytic copper layer
Schneider, Michael; Weiser, Mathias; Matthey, Björn; Herrmann, Mathias | Zeitschriftenaufsatz |
| 2018 | Influence of feedstock powder modification by heat treatments on the properties of APS-sprayed Al2O3-40%TiO2 coatings
Berger, Lutz-Michael; Sempf, Kerstin; Sohn, Yoo Jung; Vaßen, Robert | Zeitschriftenaufsatz |
| 2018 | Influence of the glass-ceramic synthesis route on the ionicconductivity of the sodium solid electrolyte Na2O-Y2O3-SiO2 (NYS)
Münchgesang, Wolfram; Wagner, Dörte; Motylenko, Mykhaylo; Schilm, Jochen; Rafaja, David; Meyer, Dirk | Abstract |
| 2018 | Innovative laser processing of inkjet-printed layers
Vinnichenko, Mykola; Fritsch, Marco; Makarov, Denys; Trofimenko, Nikolai; Sauchuk, Viktar; Kusnezoff, Mihails | Poster |
| 2018 | Integration sensorisch-diagnostischer und aktorisch-therapeutischer Funktionen in Implantaten
Lausch, Holger; Töppel, Thomas | Aufsatz in Buch |
| 2018 | Integrierte Strukturüberwachung für kohlefaserverstärkte Kunststoffverbundwerkstoffe im Automobil
Tschöke, Kilian; Gaul, Tobias; Klesse, Thomas; Lieske, Uwe; Dungern, Friedrich von; Guerrero-Santafe, Julia; Wessel-Segebade, Hannelore | Vortrag |
| 2018 | Inter-diffusion between thermally sprayed Cr3C2-NiCr coatings and an Alloy 625 substrate during long-term exposure at 500 °C, 700 °C and 900 °C
Matthews, Steven; Berger, Lutz-Michael | Zeitschriftenaufsatz |
| 2018 | Internal dynamics of blended Li-insertion electrodes
Heubner, Christian; Liebmann, Tobias; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | Investigation of droplet deposition for suspensions usable for Thermoplastic 3D Printing (T3DP)
Scheithauer, Uwe; Johne-Michaelis, Robert; Weingarten, Steven; Schwarzer, Eric; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | Investigation of electrochemical processes in CO2 sensitive electrodes
Dietrich, Stefan; Kusnezoff, Mihails; Mosch, Sindy; Baumgärtner, Christoph | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2018 | Investigation of foam structure formation in the freezing foaming process based on in-situ computed tomography
Maier, Johanna; Behnisch, Thomas; Geske, Vinzenz; Ahlhelm, Matthias; Werner, David; Moritz, Tassilo; Michaelis, Alexander; Gude, Maik | Zeitschriftenaufsatz |
| 2018 | Investigation of percolation behavior of metal-polymer composites using High Frequency Eddy Current spectroscopy
Datzmann, Iryna
: Hillmann, Susanne (Betreuer); Heuer, Henning (Gutachter); Plettemeier, Dirk (Vorsitzender); Boller, Christian (Gutachter); Tatarchuk, Dmytro (Gutachter) | Dissertation |
| 2018 | Investigation of the foam development stages by non-destructive testing technology using the freeze foaming process
Maier, Johanna; Behnisch, Thomas; Geske, Vinzenz; Ahlhelm, Matthias; Werner, David; Moritz, Tassilo; Michaelis, Alexander; Gude, Maik | Zeitschriftenaufsatz |
| 2018 | Investigation of the structure formation of Freeze Foams on the example of biocompatible ceramics
Werner, David; Ahlhelm, Matthias; Maier, Johanna; Behnisch, Thomas; Moritz, Tassilo; Michaelis, Alexander; Gude, Maik | Vortrag |
| 2018 | Iron-based Fischer-Tropsch catalysts for higher alcohol synthesis
Schaller, Max Rudolf; Reichelt, Erik; Jahn, Matthias | Zeitschriftenaufsatz |
| 2018 | Irreversible made reversible: Increasing the electrochemical capacity by understanding the structural transformations of NaxCo0.5Ti0.5O2
Maletti, Sebastian; Giebeler, Lars; Oswald, Steffen; Tsirlin, Alexander A.; Senyshyn, Anatoliy; Michaelis, Alexander; Mikhailova, Daria | Zeitschriftenaufsatz |
| 2018 | Komposit-Kathodenschichtaufbau für Festkörperbatterien auf Lithiumbasis und ein Verfahren zu seiner Herstellung
Kusnezoff, Mihails; Nikolowski, Kristian; Schilm, Jochen; Wolter, Mareike | Patent |
| 2018 | Korrosion in wässrigen Medien
Schilm, Jochen; Herrmann, Mathias | Aufsatz in Buch |
| 2018 | Kundenspezifische Ultraschallwandler auf Basis von 1-3-Piezokompositen
Hohlfeld, Kai; Neumeister, Peter; Neubert, Holger; Gebhardt, Sylvia | Vortrag |
| 2018 | Laboratory computed x-ray tomography - a nondestructive technique for 3D microstructure analyis of materials
Zschech, Ehrenfried; Löffler, Markus; Krüger, Peter; Gluch, Jürgen; Kutukova, Kristina; Zglobicka, Izabela; Silomon, Jendrik; Rosenkranz, Rüdiger; Standke, Yvonne; Topal, E. | Zeitschriftenaufsatz |
| 2018 | A laboratory X-ray microscopy study of cracks in on-chip interconnect stacks of integrated circuits
Kutukova, Kristina; Niese, Sven; Sander, Christoph; Standke, Yvonne; Gluch, Jürgen; Gall, Martin; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2018 | Langzeitzuverlässige Füllstandsmessung durch ein faserverbundintegriertes Elektroniksystem
Schwerz, Robert; Röllig, Mike; Weißenborn, Oliver; Geller, Sirko; Modler, Niels; Sauer, Sebastian | Konferenzbeitrag |
| 2018 | Laser Speckle Photometry - an advanced method for defect detection in ceramics
Chen, Lili; Cikalova, Ulana; Bendjus, Beatrice | Konferenzbeitrag |
| 2018 | Laser Speckle Photometry for Stress Measuring at Industrial Components
Chen, Lili; Cikalova, Ulana; Münch, Stefan; Röllig, Mike; Bendjus, Beatrice | Konferenzbeitrag |
| 2018 | Laser-Multi-Pass-Narrow-Gap-Schweißen - Eine neue Technologie zum Fügen von dickwandigen Bauteilen in Kraftwerken
Keßler, Benjamin; Brenner, Berndt; Dittrich, Dirk; Maier, G.; Oesterlin, H.; Bendjus, Beatrice | Zeitschriftenaufsatz |
| 2018 | Leuchtstoffbasiertes Dosimetrieverfahren für elektronenbestrahlte Verpackungsmaterialien
Heymann, Manuela
: Marschner, Uwe; Gerlach, Gerald (Gutachter); Eychmüller, Alexander (Gutachter) | Dissertation |
| 2018 | Lokale Beeinflussung des Gussgefüges durch den gezielten Einsatz von Formstoffen
Schönfeld, Katrin; Martin, Hans-Peter; Parschick, Felix; Hillmann, Susanne | Zeitschriftenaufsatz |
| 2018 | Low temperature co-fired ceramics technology for active eddy current turbocharger speed sensors
Ihle, Martin; Ziesche, Steffen; Gierth, Paul; Tuor, Andreas; Tigelaar, Jonathan; Hirsch, Oliver | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2018 | Macroscopic aerogels with retained nanoscopic plasmonic properties
Kodanek, Torben; Freytag, Axel; Schlosser, Anja; Naskar, Suraj; Härtling, Thomas; Dorfs, Dirk; Bigall, Nadja Carola | Zeitschriftenaufsatz |
| 2018 | Manufacturing technologies for ultrasonic transducers in a broad frequency range
Gebhardt, Sylvia; Hohlfeld, Kai; Günther, Paul; Neubert, Holger | Konferenzbeitrag |
| 2018 | Manufacturing technologies of piezoelectric components for integration into lightweight structures
Hohlfeld, Kai; Rhein, Sebastian; Flössel, Markus; Michaelis, Alexander; Gebhardt, Sylvia | Zeitschriftenaufsatz |
| 2018 | Mechanical and Thermophysical Properties of Hardmetals at Room and Elevated Temperatures
Vornberger, Anne; Pötschke, Johannes; Gestrich, Tim; Herrmann, Mathias | Konferenzbeitrag |
| 2018 | Metal-Ceramic Material Compounds Made by Additive Manufacturing
Moritz, Tassilo; Abel, Johannes; Scheithauer, Uwe; Müller-Köhn, Axel; Weingarten, Steven | Konferenzbeitrag |
| 2018 | Micro‐electrochemical investigation of the passive behavior of thin anodic titanium oxide films on TiAlV6‐4
Langklotz, Ulrike; Noeske, Michael; Schneider, Michael | Zeitschriftenaufsatz |
| 2018 | Microstructural characteristics and performances of Cr2O3 and Cr2O3-15%TiO2 S-HVOF coatings obtained from water-based suspensions
Toma, Filofteia-Laura; Potthoff, Annegret; Barbosa, Maria Ingrid Rocha | Zeitschriftenaufsatz |
| 2018 | Modular ceramic scaffolds for individual implants
Biggemann, Jonas; Pezoldt, Marc; Stumpf, Martin; Greil, Peter; Fey, Tobias | Zeitschriftenaufsatz |
| 2018 | Multi-modal porous microstructure for high temperature fuel cell application
Wejrzanowski, T.; Haj Ibrahim, S.; Cwieka, K.; Löffler, Markus; Milewski, J.V.; Zschech, Ehrenfried; Lee, C.-G. | Zeitschriftenaufsatz |
| 2018 | Multilayer ceramics for electrocaloric cooling applications
Molin, Christian; Neumeister, Peter; Neubert, Holger; Gebhardt, Sylvia | Zeitschriftenaufsatz |
| 2018 | Multilayer Laue Lenses (MLL) with 45 mm focal length as optics for in-situ nanoindentation experiments
Kubec, Adam; Niese, Sven; Gluch, Jürgen; Rosenthal, Martin; Todt, Juraj; Keckes, Jozef; Gawlitza, Peter | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2018 | Nano‐sized zeolite particles as inhibitor carrier in plasma electrolytic oxide layers on AZ31
Schneider, Michael; Kremmer, Kerstin; Tabatabai, Dominik; Fürbeth, Wolfram | Zeitschriftenaufsatz |
| 2018 | Nanomaterialien für elektrische Energiespeicher
Calgar, Burak; Fischer, Peter; Hagen, Markus; Tübke, Jens; Althues, Holger; Dörfler, Susanne; Guntow, Uwe; Schulz, Jochen; Endler, Ingolf; Fritsch, Marco; Meißner, Frank; Wolter, Mareike | Aufsatz in Buch |
| 2018 | Nanomaterials: Certain aspects of application, risk assessment and risk communication
Laux, Peter; Tentschert, Jutta; Riebeling, Christian; Braeuning, Albert; Creutzenberg, Otto; Epp, Astrid; Fessard, Valérie; Haas, Karl-Heinz; Haase, Andrea; Hund-Rinke, Kerstin; Jakubowski, Norbert; Kearns, Peter; Lampen, Alfonso; Rauscher, Hubert; Schoonjans, Reinhilde; Störmer, Angela; Thielmann, Axel; Mühle, Uwe; Luch, Andreas | Zeitschriftenaufsatz |
| 2018 | Nanoparticle-based impregnation of chromate-free anodizing layers for corrosion protection and adhesive bonding
Anthes, Adrian; Weidmann, Stefanie; Fürbeth, Wolfram; Kremmer, Kerstin; Schneider, Michael | Zeitschriftenaufsatz |
| 2018 | Nanoskaliges Hartmetall - Fiktion oder Realität?
Michaelis, Alexander; Pötschke, Johannes; Richter, Volkmar | Aufsatz in Buch |
| 2018 | Natriumionenleitende Membran, basierend auf einem Natrium-Beta'' -Aluminatsystem, sowie Verfahren zur Herstellung einer solchen
Grund, Martin; Schulz, Matthias; Weidl, Roland | Patent |
| 2018 | Neuartige Nahinfrarot-Sensoren für vielfältige Anwendungsfälle
Jahnel, Matthias; Langer, Robert; Brückner, Robert; Meerheim, Rico; Wynands, David; Härtling, Thomas; Hauptmann, Marek; Timmreck, Ronny; Leo, Karl | Konferenzbeitrag |
| 2018 | New Approach of Metal Substrate Fabrication for Metal-Supported Solid Oxide Fuel Cells
Günther, Anne; Moritz, Tassilo; Müller-Köhn, Axel; Härtel, Anja; Kusnezoff, Mihails; Fritsch, Marco; Trofimenko, Nikolai; Bremerstein, Irina; Kamptner, Andre | Konferenzbeitrag |
| 2018 | Nichtoxidische Werkstoffe für Vergasungsreaktoren
Herrmann, Mathias; Standke, Gisela; Himpel, Gert; Höhn, Sören; Heymer, Heike; Kunze, Steffen | Aufsatz in Buch |
| 2018 | Nonlinear effects of micro-cracks on acoustic surface and wedge waves
Rjelka, Marek; Pupyrev, Pavel D.; Köhler, Bernd; Mayer, Andreas P. | Zeitschriftenaufsatz |
| 2018 | Nonlinear effects of micro-cracks on long-wavelength symmetric Lamb waves
Rjelka, Marek; Köhler, Bernd; Mayer, Andreas | Zeitschriftenaufsatz |
| 2018 | Nonlinear ultrasonic modulation based failure warning for aluminum plates subject to fatigue loading
Kim, Yongtak; Lim, Hyung Jin; Sohn, Hoon | Zeitschriftenaufsatz |
| 2018 | Novel concept of an in-situ test system for the thermal-mechanical fatigue measurement for reliability evaluation of electronic solder joints
Metasch, René; Röllig, Mike; Naumann, Uwe; Wiesenhütter, Felix; Kaufmann, R. | Konferenzbeitrag |
| 2018 | A novel micro-double cantilever beam (micro-DCB) test in an X-ray microscope to study crack propagation in materials and structures
Kutukova, Kristina; Niese, Sven; Gelb, Jeff; Dauskardt, Reinhold; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2018 | Novel poling method for piezoelectric 0-3 composites and transfer to series production
Eßlinger, Sophia; Geller, Sirko; Hohlfeld, Kai; Gebhardt, Sylvia; Michaelis, Alexander; Gude, Maik; Schönecker, Andreas; Neumeister, Peter | Zeitschriftenaufsatz |
| 2018 | Novel thermocouples for automotive applications
Gierth, Paul; Rebenklau, Lars; Augsburg, Klaus; Niedermeyer, Lars; Bachmann, Eric | Zeitschriftenaufsatz |
| 2018 | Numerical and experimental evaluation and optimization of ceramic foam as solar absorber - single-layer vs multi-layer configurations
Zaversky, Fritz; Aldaz, Leticia; Sánchez, Marcelino A.D.; Ávila-Marin, Antonio L.; Roldán, M.I.; Fernández-Reche, Jesús; Füssel, Alexander; Beckert, Wieland; Adler, Jörg | Zeitschriftenaufsatz |
| 2018 | On the numerical convergence and performance of different spatial discretization techniques for transient elastodynamic wave propagation problems
Tschöke, Kilian; Gravenkamp, Hauke | Zeitschriftenaufsatz |
| 2018 | On the stability of c-BN-reinforcing particles in ceramic matrix materials
Wolfrum, Anne-Kathrin; Matthey, Björn; Michaelis, Alexander; Herrmann, Mathias | Zeitschriftenaufsatz |
| 2018 | Overload-proof LTCC differential pressure sensors for high temperature applications
Goldberg, Adrian; Manhica, Birgit; Ziesche, Steffen; Partsch, Uwe | Konferenzbeitrag |
| 2018 | Oxidation und Nichtoxiden
Klemm, Hagen | Aufsatz in Buch |
| 2018 | Oxide multilayer thermoelectric generators
Töpfer, Jörg; Reimann, Timmy; Schulz, Thomas; Bochmann, Arne; Capraro, Beate; Barth, Stefan; Vogel, Andy; Teichert, Steffen | Zeitschriftenaufsatz |
| 2018 | Oxygen development during the ECM on SiC
Simunkova, Lenka; Junker, Nils; Schneider, Michael; Michaelis, Alexander | Konferenzbeitrag |
| 2018 | Partikel aus einem feuerfesten keramischen Werkstoff zur Beeinflussung der Rissbildung in Hochtemperaturwerkstoffen und Verfahren zu ihrer Herstellung
Aneziris, Christos; Scheithauer, Uwe | Patent |
| 2018 | Partikel aus einem feuerfesten keramischen Werkstoff zur Beeinflussung der Schadenstoleranz von Hochtemperaturwerkstoffen, und Verfahren zu ihrer Herstellung
Aneziris, Christos; Scheithauer, Uwe | Patent |
| 2018 | Performance of a new piezoceramic thick film sensor for measurement and control of cutting forces during milling
Drossel, Welf-Guntram; Gebhardt, Sylvia; Bucht, André; Kranz, Burkhard; Schneider, Jörg; Ettrichrätz, Martin | Zeitschriftenaufsatz |
| 2018 | Piezofibre composite transducers for next generation 3D USCT
Zapf, Michael; Hohlfeld, Kai; Pfistner, P.; Liberman, C.; Dongen, K.W.A. van; Gemmeke, Hartmut; Ruiter, Nicole V.; Michaelis, Alexander; Gebhardt, Sylvia | Konferenzbeitrag |
| 2018 | Plasmonic sensor system for on-site monitoring of diclofenac molecules
Steinke, Nadja; Wuchrer, Roland; Döring, Sarah; Gerlach, Gerald; Härtling, Thomas | Konferenzbeitrag |
| 2018 | Poling technologies and design optimization for integrated piezoelectric bulk transducers and piezoelectric composites
Eßlinger, Sophia; Schönecker, Andreas; Neumeister, Peter | Zeitschriftenaufsatz |
| 2018 | Polymerization driven monomer passage through monolayer chemical vapour deposition graphene
Zhang, Tao; Liao, Zhongquan; Medrano Sandonas, Leonardo; Dianat, Arezoo; Liu, Xiaoling; Xiao, Peng; Amin, Ihsan; Gutierrez, Rafael; Chen, Tao; Zschech, Ehrenfried; Cuniberti, Gianaurelio; Jordan, Rainer | Zeitschriftenaufsatz |
| 2018 | Prediction of SRAM reliability under mechanical stress induced by harsh environments
Warmuth, Jens; Giering, Kay-Uwe; Lange, André; Clausner, André; Schlipf, Simon; Kurz, Gottfried; Otto, Michael; Paul, Jens; Jancke, Roland; Aal, Andreas; Gall, Martin; Zschech, Ehrenfried | Konferenzbeitrag |
| 2018 | Production of Multimaterial Components by Material Extrusion - Fused Filament Fabrication (ME-FFF)
Kukla, Christian; Cano, Santiago; Moritz, Tassilo; Müller-Köhn, Axel; Günther, Anne; Hampel, Stefan; Holzer, Clemens | Konferenzbeitrag |
| 2018 | Properties of Additive Manufactured Hardmetal Components produced by Fused Filament Fabrication (FFF)
Berger, Christian; Abel, Johannes; Pötschke, Johannes; Moritz, Tassilo | Konferenzbeitrag |
| 2018 | Prospect of open-cell solid foams for floating-platform multiphase reactor applications - maldistribution susceptibility and hydrodynamic behavior
Dashliborun, Amir Motamed; Füssel, Alexander; Larachi, Faical | Zeitschriftenaufsatz |
| 2018 | Quantitative analysis of backscattered electron (BSE) contrast using low voltage scanning electron microscopy (LVSEM) and its application to Al0.22Ga0.78N/GaN layers
Garitagoitia, Maria Aranzazu; Rosenkranz, Rüdiger; Löffler, M.; Clausner, André; Standke, Yvonne; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2018 | Quasi-adiabatic calorimeter for direct electrocaloric measurements
Sanlialp, Mehmet; Shvartsman, Vladimir V.; Faye, Romain; Karabasov, Maksim O.; Molin, Christian; Gebhardt, Sylvia; Defay, Emmanuel; Lupascu, Doru C. | Zeitschriftenaufsatz |
| 2018 | Reaktionstechnische Untersuchung der Verbrennungsprozesse in porösen inerten Medien aus Siliziumkarbid
Marschallek, Felix
: Michaelis, Alexander (Gutachter); Beckmann, Michael (Gutachter) | Dissertation |
| 2018 | Recent insights into the electrochemical behavior of blended lithium insertion cathodes: A review
Heubner, Christian; Liebmann, Tobias; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | Reliability analysis of encapsulated components in 3D-circuit board integration
Schwerz, Robert; Röllig, Mike; Wolter, Klaus-Jürgen | Konferenzbeitrag |
| 2018 | Scalable fabrication of nanostructured tin oxide anodes for high-energy lithium-ion batteries
Heubner, Christian; Liebmann, Tobias; Voigt, Karsten; Weiser, Mathias; Matthey, Björn; Junker, Nils; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | Schallemissionsmessungen während der Durchführung von Zugversuchen an GFK-Proben
Weihnacht, Bianca; Schulze, Eberhard; Pietzsch, Alexander; Schubert, Lars; Vandenbrande, A.; Borchers, K.-W.; Cerbe, Burkhard | Vortrag |
| 2018 | Schutzschichten für keramische Faserverbundwerkstoffe
Kunz, Willy; Schönfeld, Katrin; Klemm, Hagen | Zeitschriftenaufsatz |
| 2018 | Self-Sensing Actuators Based on Ferromagnetic Shape Memory Alloys
Ehle, Fabian; Neumeister, Peter; Keitel, Uwe; Neubert, Holger | Konferenzbeitrag |
| 2018 | Semi-empirical master curve concept describing the rate capability of lithium insertion electrodes
Heubner, Christian; Seeba, Jann; Liebmann, Tobias; Nickol, Alexander; Börner, Stefan; Fritsch, Marco; Nikolowski, Kristian; Wolter, M.; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | Sensorsystem zur Charakterisierung des Zustandes von in einem Kultivierungsgefäß enthaltenen Proben einer heterogenen Biomassestruktur
Bendjus, Beatrice; Cikalova, Ulana; Eigner, Jürgen; Reichelt, Matthias; Schott, Carolin; Steingroewer, Juliane; Werner, Thomas | Patent |
| 2018 | Setup für Ermüdungsversuche an elektronischen Komponenten unter kombinierten Temperatur- und Vibrationslasten
Meier, Karsten; Metasch, René; Röllig, Mike; Bock, K. | Konferenzbeitrag |
| 2018 | Si amorphization by focused ion beam milling: Point defect model with dynamic BCA simulation and experimental validation
Huang, J.; Löffler, Markus; Mühle, Uwe; Möller, Wolfhard; Mulders, Johannes J.L.; Kwakman, Laurens; Dorp, Willem F. van; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2018 | Siliciumcarbid gebundene Diamantwerkstoffe - Herstellung, Mikrostruktur und Eigenschaften
Matthey, Björn
: Michaelis, Alexander (Gutachter); Vollstädt, Heiner (Gutachter); Herrmann, Mathias (Betreuer) | Dissertation |
| 2018 | Siliciumnitrid
Herrmann, Mathias | Aufsatz in Buch |
| 2018 | Sintering behavior, microstructure and thermoelectric properties of calcium cobaltite thick films for transversal thermoelectric multilayer generators
Schulz, Thomas; Reimann, Timmy; Bochmann, Arne; Vogel, Andy; Capraro, Beate; Mieller, Björn; Teichert, Steffen; Töpfer, Jörg | Zeitschriftenaufsatz |
| 2018 | Solder joint fatigue analysis under combined thermal and vibration loading
Meier, Karsten; Röllig, Mike; Liu, Y.; Bock, K. | Konferenzbeitrag |
| 2018 | Solid state sintered nanoscaled hardmetals and their properties
Pötschke, Johannes; Säuberlich, Tino; Vornberger, Anne; Meese-Marktscheffel, J.A. | Zeitschriftenaufsatz |
| 2018 | Structural integration of sensors/actuators by laser beam melting for tailored smart components
Töppel, Thomas; Lausch, Holger; Brand, Michael; Hensel, Eric; Arnold, Michael; Rotsch, Christian | Zeitschriftenaufsatz |
| 2018 | Studying the progress of sintering in ferrous powder compacts by in-situ measuring the thermal conductivity
Danninger, Herbert; Leitner, Gert; Gierl-Mayer, Christian | Zeitschriftenaufsatz |
| 2018 | Sub 25 nm focusing with a long working distance using multilayer Laue lenses
Kubec, Adam; Niese, Sven; Rosenthal, M.; Gluch, Jürgen; Burghammer, M.; Gawlitza, Peter; Keckes, J.; Leson, Andreas | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2018 | Sub-surface assessment of hydrothermal ageing in zirconia-containing femoral heads for hip joint applications
Grémillard, Laurent; Chêvalier, Jérôme; Martin, Laura; Douillard, Thierry; Begand, Sabine; Hans, K.; Oberbach, Thomas | Zeitschriftenaufsatz |
| 2018 | Surface integrity in ultra-precision grinding of transparent ceramics
Klocke, Fritz; Dambon, Olaf; Bletek, Thomas; Höche, Thomas; Naumann, Falk; Hutzler, Thomas | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2018 | Sustainable synthesis of high-surface-area graphite oxide via dry ball milling
Mahmoud, Alaa El Din; Stolle, Achim; Stelter, Michael | Zeitschriftenaufsatz |
| 2018 | Synthesis and shaping scale-up study of functionalized UiO-66 MOF for ammonia air purification filters
Khabzina, Yoldes; Dhainaut, Jeremy; Ahlhelm, Matthias; Richter, Hans-Jürgen; Reinsch, Helge; Stock, Norbert; Farrusseng, David | Zeitschriftenaufsatz |
| 2018 | Techno-economic analysis of a co-electrolysis-based synthesis process for the production of hydrocarbons
Herz, Gregor; Reichelt, Erik; Jahn, Matthias | Zeitschriftenaufsatz |
| 2018 | Theoretical optimization of electrode design parameters of Si based anodes for lithium-ion batteries
Heubner, Christian; Langklotz, Ulrike; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | Thermal behaviour of cermets and hardmetals during debinding and sintering
Gestrich, Tim; Kaiser, Arno; Pötschke, Johannes; Meinl, Juliane; Höhn, Sören | Zeitschriftenaufsatz |
| 2018 | Thermo-Mechanical Measurement Approach of Ag-sintered Joints for Power Electronics
Metasch, René; Meier, Karsten; Röllig, Mike | Konferenzbeitrag |
| 2018 | Thin bioactive Zn substituted hydroxyapatite coating deposited on ultrafine-grained titanium substrate
Prosolov, K.A.; Belyavskaya, O.A.; Muehle, U.; Sharkeev, Y.P. | Zeitschriftenaufsatz |
| 2018 | Time-resolved microscopy of fs-laser-induced heat flows in glasses
Bonse, Jörn; Seuthe, Thomas; Grehn, Moritz; Eberstein, Markus; Rosenfeld, Arkadi; Mermillod-Blondin, Alexandre | Zeitschriftenaufsatz |
| 2018 | Titanium oxynitride coatings deposited by magnetron sputtering for improvement of cardiovascular stent design
Duta, Oana Cristina; Ficai, Denisa; Ficai, Anton; Andronescu, Ecaterina; Beshchasna, Nataliia; Saqib, Muhammad; Opitz, Jörg; Kraśkiewicz, Honorata; Wasyluk, Łukasz; Kuzmin, Oleg; Pichugin,Vladimir | Konferenzbeitrag |
| 2018 | Umformbare keramische und/oder pulvermetallurgische Grünfolien und Verfahren zur Umformung dieser keramischen und/oder pulvermetallurgischen Grünfolien
Moritz, Tassilo; Schwarzer, Eric | Patent |
| 2018 | Untersuchungen zur Charakteristik und Applikationen des EsB Detektors
Garitagoitia Cid, María Aránzazu
: Rosenkranz, Rüdiger (Betreuer); Zschech, Ehrenfried (Betreuender Hochschullehrer); Bartha, Johann W. (Vorsitzender) | Dissertation |
| 2018 | Validation of different SAC305 material models calibrated on isothermal tests using in-situ TMF measurement of thermally induced shear load
Kuczynska, Marta; Schafet, Natalja; Becker, Ulrich; Metasch, René; Röllig, Mike; Kabakchiev, Alexander; Weihe, Stefan | Zeitschriftenaufsatz |
| 2018 | Ventil aus einem keramischen Werkstoff und ein Verfahren zu seiner Herstellung
Goldberg, Adrian; Partsch, Uwe; Ziesche, Steffen | Patent |
| 2018 | Verbundwerkstoffe mit sehr hoher Verschleißbeständigkeit
Adler, Jörg; Füssel, Alexander; Füssel, Thomas; Nelle, Stefan; Standke, Gisela | Patent |
| 2018 | Verfahren und Vorrichtung zur Aufbereitung von Abfallprodukten
Wufka, André; Faßauer, Burkhardt; Georgi, Hartmut; Müller, Pascal; Münch, Christiane; Weile, Frank | Patent |
| 2018 | Verfahren zum Auswerten eines digitalen Messsignals einer Wirbelstromprüfanordnung
Joneit, Dieter | Patent |
| 2018 | Verfahren zur Behandlung von Geothermalfluid- oder Formationswasserströmen durch kontinuierliche elektrochemische Abtrennung reduzierbarer Metall- und/ oder Metalloidionen aus dem Förderstrom
Friedrich, Hans-Jürgen; Hielscher, Mario; Hinrichs, Torsten; Rott, Hans-Jürgen | Patent |
| 2018 | Verfahren zur Bestimmung von mechanischen Spannungen in Substraten oder Schaltungsträgern, die mit einem keramischen Werkstoff gebildet sind
Bendjus, Beatrice; Cikalova, Ulana; Münch, Stefan; Röllig, Mike | Patent |
| 2018 | Verfahren zur Herstellung einer elektrochemischen Zelle sowie eine mit dem Verfahren hergestellte elektrochemische Zelle
Freytag, Christian; Kusnezoff, Mihails; Nikolowski, Kristian; Partsch, Uwe; Schilm, Jochen; Wolter, Mareike | Patent |
| 2018 | Verfahren zur Herstellung polykristalliner transparenter Formteile
Kemnitz, Erhard; Krahl, Thoralf; Reichel, Uwe | Patent |
| 2018 | Verfahren zur Herstellung von Hartmetallkörpern mittels 3D-Druck
Pötschke, Johannes; Richter, Hans-Jürgen | Patent |
| 2018 | Vorrichtung zur additiven Herstellung dreidimensionaler Bauteile
Abel, Johannes; Moritz, Tassilo; Scheithauer, Uwe; Schwarzer, Eric; Weingarten, Steven | Patent |
| 2018 | Vorrichtung zur Durchführung von Biegeversuchen an plattenförmigen Proben
Clausner, André; Gall, Martin; Macher, Frank; Sander, Christoph; Zschech, Ehrenfried | Patent |
| 2018 | Vorrichtung zur in situ Überprüfung der Qualität bei der generativen Fertigung von Bauteilen
Brosius, David Maximilian; Hillmann, Susanne; Krüger, Peter | Patent |
| 2018 | Warum nicht mal in Keramik? Keramische Lösungen für den Maschinenbau
Freund, Susanne | Zeitschriftenaufsatz |
| 2018 | Wear behavior of diamond-silicon nitride composites sintered with FAST/SPS
Wolfrum, Anne-Kathrin; Quitzke, Caroline; Matthey, Björn; Herrmann, Mathias; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | Wirbelstromprüfung in der CFK-Fertigung
Bardl, Georg; Kupke, Richard; Heuer, Henning; Cherif, Chokri | Zeitschriftenaufsatz |
| 2018 | Zerstörungsfreie Prüfung
Hillmann, Susanne; Wunderlich, Christian; Heuer, Henning; Köhler, Bernd; Krüger, Peter; Opitz, Jörg; Stephan, Mareike; Tschöpe, Constanze; Wolf, Christian | Aufsatz in Buch |
| 2018 | Zuverlässigkeitsanalyse von gekapselten Bauelementen in der 3D-Leiterplattenintegration
Schwerz, Robert | Dissertation |
| 2017 | 13th International Symposium on ElectroChemical Machining Technology, INSECT 2017. Proceedings
: Michaelis, A.; Schneider, M. | Tagungsband |
| 2017 | 3D-Binder-Jetting von Hartmetallen
Pötschke, Johannes; Berger, Christian; Richter, Hans-Jürgen; Moritz, Tassilo | Zeitschriftenaufsatz |
| 2017 | Accelerated life time measurement with in-situ force and displacement monitoring during thermal cycling on solder joints
Metasch, René; Röllig, Mike; Kuczynska, Marta; Schafet, Natalja; Becker, Ulrich; Meier, Karsten; Panchenko, Iuliana | Konferenzbeitrag |
| 2017 | Additive manufacturing of hardmetals
Pötschke, Johannes; Berger, Christian; Richter, Hans-Jürgen; Scheithauer, Uwe; Weingarten, Steven | Konferenzbeitrag |
| 2017 | Advances in solid oxide fuel cells and electronic ceramics II
: Kusnezoff, Mihails (Hrsg.); Bansal, Narottam P. (Hrsg.); Shimamura, Kiyoshi (Hrsg.) | Tagungsband |
| 2017 | Advances in solid oxide fuel cells and electronic ceramics II. Preface
Kusnezoff, Mihails; Bansal, Narottam P.; Shimamura, Kiyoshi | Konferenzbeitrag |
| 2017 | Analysis of the effect of TSV-induced stress on devices performance by direct strain and electrical measurements and FEA simulations
Kteyan, Armen; Mühle, Uwe; Gall, Martin; Sukharev, Valeriy; Radojcic, Riko; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2017 | Anodic dissolution of solid-state sintered silicon carbide at high current densities
Schneider, Michael; Schubert, Nora; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Applications of metal foam as catalyst carrier
Walther, Gunnar; Gaitzsch, Uwe; Büttner, Tilo; Kieback, Bernd; Weißgärber, Thomas; Kolvenbach, Robin; Lincke, Marc | Konferenzbeitrag |
| 2017 | Area-selective atomic layer deposition of Ru on electron-beam-written Pt(C) patterns versus SiO2 substratum
Junige, Marcel; Löffler, Markus; Geidel, Marion; Albert, Matthias; Bartha, Johann W.; Zschech, Ehrenfried; Rellinghaus, Bernd; Dorp, Willem F. van | Zeitschriftenaufsatz |
| 2017 | Atomic layer etching of gallium nitride (0001)
Kauppinen, Christoffer; Khan, Sabbir Ahmed; Sundqvist, Jonas; Suyatin, Dmitry B.; Suihkonen, Sami; Kauppinen, Esko I.; Sopanen, Markku | Zeitschriftenaufsatz |
| 2017 | Auslegungsplattform für keramische Schraubendruckfedern
Beckert, Wieland; Stockmann, Jens; Koplin, Christof | Konferenzbeitrag |
| 2017 | An automated non-destructive testing system for seam bondings in automotive serial production
Klausing, Maximilian; Heuer, Henning | Zeitschriftenaufsatz |
| 2017 | Autonomer Flammenionisationsdetektor für den Explosionsschutz in Kanalisationsnetzen
Kuipers, Winfred; Förster, Jan; Koch, Christian; Goldberg, Adrian; Lenz, Christian; Ziesche, Steffen; Bechtold, F.; Jurkow, Dominik; Ruffmann, Bastian; Maurer, Peter; Großklags, Frank; Müller, Bettina | Zeitschriftenaufsatz |
| 2017 | Battery - Determination and Forecast via Synergetics
Haß, Ernst-Christoph; Knicker, Katharina; Sydow, Uwe; Schulz, Matthias; Plath, Peter J. | Aufsatz in Buch |
| 2017 | Biogas as an alternative carbon source for the production of waxes
Herz, Gregor; Reichelt, Erik; Jahn, Matthias | Konferenzbeitrag |
| 2017 | Carbide-oxide composites made from nanoscaled tungsten carbide, alumina and zirconia powders
Pötschke, Johannes; Berger, Christian; Vornberger, Anne | Konferenzbeitrag |
| 2017 | Carrier mobility shift in advanced silicon nodes due to chip-package interaction
Sukharev, Valeriy; Choy, Jun-Ho; Kteyan, Armen; Hovsepyan, Henrik; Nakamoto, Mark; Zhao, Wei; Radojcic, Riko; Mühle, Uwe; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2017 | CerAMfacturing, Development of ceramic and multi material components by additive manufacturing methods for personalized medical products, H2020
Moritz, Tassilo | Zeitschriftenaufsatz |
| 2017 | Ceramic-based 4D components: Additive Manufacturing (AM) of ceramic-based functionally graded materials (FGM) by thermoplastic 3D printing (T3DP)
Scheithauer, Uwe; Weingarten, Steven; Johne, Robert; Schwarzer, Eric; Abel, Johannes; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Ceramics with high electrical conductivity at room temperature
Martin, Hans-Peter; Feng, Bing; Michaelis, Alexander | Vortrag |
| 2017 | Characterizing micro-crack distributions with nonlinear acoustic surface and wedge waves
Rjelka, Marek; Köhler, Bernd; Pupyrev, Pavel; Mayer, Andreas | Konferenzbeitrag |
| 2017 | Chemische Gasphasenabscheidung. Beschichtungen
Gäbler, J.; Brand, C.; Paschke, H.; Endler, Ingolf | Aufsatz in Buch |
| 2017 | Co-electrolysis with CFY-stacks
Megel, Stefan; Dosch, Christian; Rothe, Stefan; Folgner, Christoph; Trofimenko, Nikolai; Rost, Axel; Kusnezoff, Mihails; Reichelt, Erik; Jahn, Matthias; Michaelis, Alexander; Bienert, Christian; Brandner, Marco | Konferenzbeitrag |
| 2017 | Combination of Tape Casting and Paper Technology for Producing Ceramic-Metal Composites and Their further Processing
Härtel, Anja; Richter, Hans-Jürgen; Moritz, Tassilo | Zeitschriftenaufsatz |
| 2017 | Combining flash sintering/sinterforging with hybrid FAST/SPS technology for oxide and non-oxide materials
Hennicke, Jürgen; Räthel, Jan; Kessel, Tobias | Konferenzbeitrag |
| 2017 | Comparison of direct electrocaloric characterization methods exemplified by 0.92 Pb(Mg1/3Nb2/3)O3-0.08 PbTiO3 multilayer ceramics
Molin, Christian; Peräntie, Jani; Goupil, Florian le; Weyland, Florian; Sanlialp, Mehmet; Stingelin, Natalie; Novak, Nikola; Lupascu, Doru C.; Gebhardt, Sylvia | Zeitschriftenaufsatz |
| 2017 | Corrosion behaviour of bismuth-containing gold thick-film electrodes
Junker, Nils; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Corrosion stability of Sialon-based materials in acids and basic solutions
Nickol, Alexander; Wolfrum, Anne-Kathrin; Kunz, Willy; Michaelis, Alexander; Herrmann, Mathias | Zeitschriftenaufsatz |
| 2017 | Crack detection of ceramics based on laser speckle photometry
Bendjus, Beatrice; Cikalova, Ulana; Chen, Lili | Zeitschriftenaufsatz |
| 2017 | Critical impact of chloride containing reference electrodes on electrochemical measurements
Lämmel, Christoph; Heubner, Christian; Liebmann, Tobias; Schneider, Michael | Zeitschriftenaufsatz |
| 2017 | Deep drawing of ceramic green tapes - A promising technology for producing new lightweight non-planar kiln furniture
Schwarzer, Eric; Scheithauer, Uwe; Brosche, Maximilian; Richter, Hans-Jürgen; Moritz, Tassilo | Zeitschriftenaufsatz |
| 2017 | Degradation of endocrine disruptor bisphenol A by ultrasound-assisted electrochemical oxidation in water
Dietrich, Matz; Franke, Marcus; Stelter, Michael; Bräutigam, Patrick | Zeitschriftenaufsatz |
| 2017 | Dependencies between internal structure and mechanical properties of spray dried granules - experimental study and DEM simulation
Eckhard, Susanna; Fries, Manfred; Antonyuk, Sergiy; Heinrich, Stefan | Zeitschriftenaufsatz |
| 2017 | Derivation and application of a generalized correlation for mass transfer in packed beds
Reichelt, Erik; Jahn, Matthias; Lange, Rüdiger | Zeitschriftenaufsatz |
| 2017 | Design and evaluation of a Fischer-Tropsch process for the production of waxes from biogas
Herz, Gregor; Reichelt, Erik; Jahn, Matthias | Zeitschriftenaufsatz |
| 2017 | Design and evaluation of a power-to-liquid process for the production of valuable hydrocarbons from CO2 and H2O
Herz, Gregor; Reichelt, Erik; Jahn, Matthias | Konferenzbeitrag |
| 2017 | Determination of defect sizes with the help of structural-health-monitoring methods based on guided waves
Tschöke, Kilian; Weihnacht, Bianca; Gaul, Tobias; Schulze, Eberhard; Schubert, Lars; Neubeck, Robert | Konferenzbeitrag |
| 2017 | Development and application of binary suspensions in the ternary system Cr2O3-TiO2-Al2O3 for S-HVOF spraying
Kratzsch, Robert; Potthoff, Annegret; Kulissa, Nick; Kunze, Oliver; Barbosa, Maria Manuel; Toma, Filofteia-Laura | Konferenzbeitrag |
| 2017 | Development of a highly efficient micro-scale CHP system based on fuel-flexible gasification and a SOFC
Brunner, Thomas; Ramerstorfer, Christian; Obernberger, Ingwald; Kerschbaum, Michael; Aravind, P.V.; Makkus, Robert; Megel, Stefan; Hauth, Martin; Seidl, Michael; Weißensteiner, Stefan; Götz, Thomas; Zappa, William | Konferenzbeitrag |
| 2017 | Development of a SOFC Power Generator for the Indian Market
Pfeifer, Thomas; Chakradeo, Amar; Ahire, Nitin; Baade, Jens; Barthel, Markus; Dosch, Christian; Näke, Ralf; Hartmann, Mathias | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2017 | Direct influence of titanium and zirconia particles on the morphology and functionality of mature human osteoclasts
Pasold, Juliane; Markhoff, Jana; Tillmann, Jenny; Krogull, Martin; Pisowocki, Phillip; Bader, Rainer | Zeitschriftenaufsatz |
| 2017 | Dispersion of nanomaterials in aqueous media: Towards protocol optimization
Kaur, Inder; Ellis, Laura-Jayne; Romer, Isabella; Tantra, Ratna; Carriere, Marie; Allard, Soline; Mayne-L'Hermite, Martine; Minelli, Caterina; Unger, Wolfgang; Potthoff, Annegret; Rades, Steffi; Valsami-Jones, Eugenia | Zeitschriftenaufsatz |
| 2017 | Doping of graphene induced by boron/silicon substrate
Dianat, Arezoo; Liao, Zhongquan; Gall, Martin; Zhang, Tao; Gutierrez, Rafael; Zschech, Ehrenfried; Cuniberti, Gianaurelio | Zeitschriftenaufsatz |
| 2017 | Droplet-based additive manufacturing of hard metal components by thermoplastic 3D printing (T3DP)
Scheithauer, Uwe; Pötschke, Johannes; Weingarten, Steven; Schwarzer, Eric; Vornberger, Anne; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Editorial
Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2017 | The effect of manufacturing conditions on discontinuity population and fatigue fracture behavior in carbon/epoxy composites
Hakim, I.; Laquai, R.; Walter, D.; Mueller, B.; Graja, P.; Meyendorf, N.; Donaldson, S. | Konferenzbeitrag |
| 2017 | Effect of membranes in exhaust particulate filtration
Adler, Jörg; Petasch, Uwe | Konferenzbeitrag |
| 2017 | Effect on the integration of piezoceramic composites into structural components on their poling condition and polarizability
Hohlfeld, Kai; Eßlinger, Sophia; Eydam, Agnes; Winkler, Anja; Weber, Tony; Gude, Maik; Modler, Niels; Gerlach, Gerald; Suchaneck, Gunnar; Michaelis, Alexander; Schönecker, Andreas; Gebhardt, Sylvia; Neumeister, Peter | Konferenzbeitrag |
| 2017 | Efficient hydrogen production on MoNi4 electrocatalysts with fast water dissociation kinetics
Zhang, Jian; Wang, Tao; Liu, Pan; Liao, Zhongquan; Liu, Shaohua; Zhuang, Xiaodong; Chen, Mingwei; Zschech, Ehrenfried; Feng, Xinliang | Zeitschriftenaufsatz |
| 2017 | Einfluss der Anwesenheit von faserigen Partikeln auf die Strömungsgeschwindigkeiten in gerührten Systemen
Lomtscher, Annett; Jobst, Karin; Kraume, Matthias | Zeitschriftenaufsatz |
| 2017 | Einsatz von strohartigen Biomassen in Biogasanlagen - Stand und Perspektiven
Schwarz, Björn; Fleschhut, Monika; Baye, Dietrich | Konferenzbeitrag |
| 2017 | Electrochemical Machining
Schneider, Michael; Lohrengel, Manuel | Aufsatz in Buch |
| 2017 | Electrochemical machining of a solid-state sintered ceramic - a parameter study
Schneider, Michael; Safonowa, Elena; Junker, Nils; Schubert, Nora; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Electrochemical studies of the ECM on chromium
Simunkova, Lenka; Schneider, Michael | Konferenzbeitrag |
| 2017 | Electrochemical surface modification of titanium based material with detonation nanodiamonds for implant applications
Shaikh, Afnan Qurban
: Cuniberti, Gianaurelio (Gutachter); Opitz, Jörg (Betreuer); Michaelis, Alexander (Gutachter) | Dissertation |
| 2017 | An embedded system for acoustic pattern recognition
Tschöpe, Constanze; Duckhorn, Frank; Richter, Christian; Blüthgen, Peter; Wolff, Matthias | Konferenzbeitrag |
| 2017 | Enabling energy efficiency and polarity control in germanium nanowire transistors by individually gated nanojunctions
Trommer, Jens; Heinzig, André; Mühle, Uwe; Löffler, Markus; Winzer, Annett; Jordan, Paul M.; Beister, Jürgen; Baldauf, Tim; Geidel, Marion; Adolphi, Barbara; Zschech, Ehrenfried; Mikolajick, Thomas; Weber, Walter Michael | Zeitschriftenaufsatz |
| 2017 | Enhancements on fast sintering systems promote transfer from the lab to industrial applications
Hennicke, Jürgen; Kessel, Tobias; Räthel, Jan | Konferenzbeitrag |
| 2017 | Entwicklung funktioneller Metall-Keramik-Verbundfolien unter Anwendung papiertechnologischer Verfahren
Slawik, Tim
: Michaelis, Alexander (Gutachter); Großmann, Harald J. (Gutachter); Aneziris, Christos G. (Gutachter) | Dissertation |
| 2017 | Entwicklung von Cr2O3-Hochleistungsschichten durch thermisches Spritzen mit Suspensionen
Toma, Filofteia-Laura; Potthoff, Annegret; Langner, Stefan; Kulissa, Nick; Trache, Richard | Zeitschriftenaufsatz |
| 2017 | Entwicklung von Cr2O3-Hochleistungsschichten durch thermisches Spritzen mit Suspensionen
Toma, Filofteia-Laura; Langner, Stefan; Kulissa, Nick; Trache, Richard; Potthoff, Annegret | Zeitschriftenaufsatz |
| 2017 | Entwicklungsperspektiven für Zellformate von Lithium-Ionen-Batterien in der Elektromobilität
Hettesheimer, Tim; Thielmann, Axel; Neef, Christoph; Möller, Kai-Christian; Wolter, Mareike; Lorentz, Vincent; Gepp, Markus; Wenger, Martin; Prill, Torben; Zausch, Jochen; Kitzler, Peter; Montnacher, Joachim; Miller, Martin; Hagen, Markus; Fanz, Patrik; Tübke, Jens | Studie |
| 2017 | Evaluation of soft chemistry methods to synthesize Gd-doped CaMnO3-δ with improved thermoelectric properties
Löhnert, Romy; Stelter, Michael; Töpfer, Jörg | Zeitschriftenaufsatz |
| 2017 | Experimental determination of the Young's modulus of various electronic packaging materials
Krämer, Frank; Röllig, Mike; Metasch, René; Wiese, Steffen; Al Ahmar, Joseph; Meier, Karsten | Konferenzbeitrag |
| 2017 | Experimental investigation on adsorption and surface characteristics of salt hydrates and hydrophobic porous matrix based composites
Laß-Seyoum, Asnakech; Borozdenko, D.; Friedrich, T.; Schönfeld, Katrin; Adler, Jörg; Mack, S. | Zeitschriftenaufsatz |
| 2017 | Extraction of depth profiles of third order elastic constants in cracked media
Rjelka, Marek; Köhler, Bernd; Mayer, Andreas | Konferenzbeitrag |
| 2017 | Extrusion and tape casting based production of new lightweight kiln furniture with non-planar surface
Scheithauer, Uwe; Schwarzer, Eric; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Konferenzbeitrag |
| 2017 | Extrusionsverfahren und Extrusionsvorrichtung zur Herstellung eines mit einem Boden verschlossenen Keramikrohres
Hofacker, Martin; Kiesel, Lutz | Patent |
| 2017 | Fabrication of a transversal multilayer thermoelectric generator with substituted calcium manganite
Reimann, Timmy; Bochmann, Arne; Vogel, Andy; Capraro, Beate; Teichert, Steffen; Töpfer, Jörg | Zeitschriftenaufsatz |
| 2017 | FAST/Flash: A combination of FAST/SPS and flash sintering
Räthel, Jan; Herrmann, Mathias; Hennicke, Jürgen; Kirchner, René | Vortrag |
| 2017 | Fatigue measurement setup under combined thermal and vibration loading on electronic SMT assembly
Meier, Karsten; Metasch, René; Röllig, Mike; Bock, Karlheinz | Konferenzbeitrag |
| 2017 | Festkörperaktoren mit neuen Eigenschaften auf der Basis von magnetischen Formgedächtnislegierungen
Neubert, Holger; Böhm, Andrea | Zeitschriftenaufsatz |
| 2017 | Fischer-Tropsch to higher alcohols
Schaller, Max Rudolf; Reichelt, Erik; Fischer, Nico; Claeys, Michael; Jahn, Matthias | Konferenzbeitrag |
| 2017 | Fraunhofer Institute for Ceramic Technologies and Systems. Annual Report 2016/2017
| Jahresbericht |
| 2017 | Fraunhofer-Institut für Keramische Technologien und Systeme. Jahresbericht 2016/2017
| Jahresbericht |
| 2017 | From the sea to the laboratory: Characterization of microplastic as prerequisite for the assessment of ecotoxicological impact
Potthoff, Annegret; Oelschlägel, Kathrin; Schmitt-Jansen, Mechthild; Rummel, Christoph Daniel; Kühnel, Dana | Zeitschriftenaufsatz |
| 2017 | Funktionalisierte 3D-Keramikkomponenten durch Kombination von Mehrlagenkeramik und Keramikspritzguss
Ziesche, Steffen; Lenz, Christian; Müller-Köhn, Axel | Konferenzbeitrag |
| 2017 | Fused-Filament-Fabrication (FFF): A promising technique for large ceramic parts made of a variety of materials - challenges, approaches, perspectives
Abel, Johannes; Scheithauer, Uwe; Klemm, Hagen; Moritz, Tassilo; Michaelis, Alexander | Vortrag |
| 2017 | Generalized correlations for mass transfer and pressure drop in fiber-based catalyst supports
Reichelt, Erik; Jahn, Matthias | Zeitschriftenaufsatz |
| 2017 | Generative Fertigung von Sinterglaskörpern für Glasdurchführungen durch 3D-Drucken
Nicolai, Katja
: Rädlein, Edda (Akademischer Betreuer); Michaelis, Alexander (Gutachter); Bergmann, Jean Pierre (Gutachter) | Dissertation |
| 2017 | Glass-carbon-composites for heating elements manufactured by 2C-PIM
Mannschatz, Anne; Müller-Köhn, Axel; Rost, Axel; Schilm, Jochen; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Grain growth inhibition in ultrafine hardmetals
Pötschke, Johannes; Richter, Volkmar; Gestrich, Tim; Säuberlich, Tino; Meese-Marktscheffel, Juliane | Zeitschriftenaufsatz |
| 2017 | Grain Growth Inhibition of Hardmetals During Initial Heat-Up
Pötschke, Johannes; Gestrich, Tim; Richter, Volkmar | Konferenzbeitrag |
| 2017 | Greeting of the programming committee of the 93rd german ceramic society annual meeting and symposium on high-performance ceramics 2018
Michaelis, Alexander; Voigt, Ingolf; Zins, Michael | Abstract |
| 2017 | Herstellung und Charakterisierung piezokeramischer Komponenten und daraus abgeleiteter Piezokomposite
Hohlfeld, Kai
: Michaelis, Alexander (Gutachter); Drossel, Welf-Guntram (Gutachter); Gebhardt, Sylvia (Betreuer) | Dissertation |
| 2017 | Herstellung von funktionellen, hybriden keramik-basierten Komponenten durch Kombination additiver und konventioneller Fertigungsverfahren
Scheithauer, Uwe; Schwarzer, Eric; Günther, Paul; Ahlhelm, Matthias; Gradmann, Rena; Pohl, Markus; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Konferenzbeitrag |
| 2017 | Hierarchical structures of functionalized Detonation NanoDiamonds (DNDs) for biomedical applications
Dennison, Nicholas Robert
: Opitz, Jörg (Betreuer); Römhildt, Lotta (Betreuer) | Master Thesis |
| 2017 | Hierarchical surface patterning of Ni- and Be-free Ti- and Zr-based bulk metallic glasses by thermoplastic net-shaping
Sarac, Baran; Bera, Supriya; Balakin, Sascha; Stoica, Mihai; Cǎlin, Mariana; Eckert, Jürgen | Zeitschriftenaufsatz |
| 2017 | High pressure adsorption, permeation and swelling of carbon membranes - measurements and modelling at up to 20 MPa
Kruse, Nicolas; Schießer, Yuliya; Reger-Wagner, Norman; Richter, Hannes; Voigt, Ingolf; Braun, Gerd; Repke, Jens Uwe | Zeitschriftenaufsatz |
| 2017 | High-flux carbon molecular sieve membranes for gas separation
Richter, Hannes; Voss, Hartwig; Kaltenborn, Nadine; Kämnitz, Susanne; Wollbrink, Alexander; Feldhoff, Armin; Caro, Jürgen; Roitsch, Stefan; Voigt, Ingolf | Zeitschriftenaufsatz |
| 2017 | Highest UV-vis transparency of MgAl2O4 spinel ceramics prepared by hot pressing with LiF
Wätzig, Katja; Hutzler, Thomas | Zeitschriftenaufsatz |
| 2017 | Hot gas stability of various ceramic matrix composites
Klemm, Hagen; Kunz, Willy; Wamser, T.; Rüdinger, Arne; Weiss, R.A.; Lauer, A.; Wilhelmi, C.; Machry, T.; Hofmann, S.; Koch, D. | Konferenzbeitrag |
| 2017 | Human α-thrombin detection platform using aptamers on a silicon nanowire field-effect transistor
Römhildt, Lotta; Zörgiebel, Felix; Ibarlucea, Bergoi; Vahdatzadeh, Maryam; Baraban, Larysa; Cuniberti, Gianaurelio; Pregl, Sebastian; Weber, Walter M.; Mikolajick, Thomas; Opitz, Jörg | Konferenzbeitrag |
| 2017 | HVOF- and HVAF-sprayed Cr3C2-NiCr coatings deposited from feedstock powders of spherical morphology: Microstructure formation and high-stress abrasive wear resistance up to 800 °C
Janka, Leo; Norpoth, Jonas; Trache, Richard; Thiele, Sven; Berger, Lutz-Michael | Zeitschriftenaufsatz |
| 2017 | Hybride Materialmodellierung für ferroelektroelastische Keramiken
Stark, Sebastian
: Balke, Herbert (Gutachter); Kuna, Meinhard (Gutachter); Michaelis, Alexander (Promotionskommission) | Dissertation |
| 2017 | Implementierung eines Sintermodells in ANSYS
Stark, Sebastian; Neumeister, Peter | Vortrag |
| 2017 | The importance of shear thinning, thixotropic and viscoelastic properties of thick film pastes to predict effects on printing performance
Reinhardt, Kathrin; Hofmann, Nancy; Eberstein, Markus | Konferenzbeitrag |
| 2017 | In-situ preparation and electrochemical characterization of submicron sized NaFePO4 cathode material for sodium-ion batteries
Heubner, Christian; Heiden, Sebastian; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | In-Situ Stretching Patterned Graphene Nanoribbons in the Transmission Electron Microscope
Liao, Zhongquan; Sandonas, Leonardo Medrano; Zhang, Tao; Gall, Martin; Dianat, Arezoo; Gutierrez, Rafael; Mühle, Uwe; Gluch, Jürgen; Jordan, Rainer; Cuniberti, Gianaurelio; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2017 | In-Situ Transmission Electron Microscopy Studies on Advanced Materials for Micro- and Nano-Electronics
Liao, Zhongquan
: Zschech, Ehrenfried (Gutachter); Cuniberti, Gianaurelio (Gutachter); Wolf, Ingrid de (Gutachter) | Dissertation |
| 2017 | Industrielle Reststoffe dreifach nutzen
Wufka, A.; Weile, F.; Münch, C.; Müller, P.; Georgi, H. | Zeitschriftenaufsatz |
| 2017 | Influence of C content on electrochemical corrosion resistance of nanostructured hardmetals
Fabijanic, T.A.; Pötschke, J.; Alar, V.; Alar, Ž. | Konferenzbeitrag |
| 2017 | Influence of carbon source and synthesis temperature on structural and morphological properties of carbon nanofibers synthesized on tubular porous ZrO2 layers
Simon, Adrian; Seyring, Martin; Reger-Wagner, Norman; Richter, Hannes; Voigt, Ingolf; Rettenmayr, Markus; Ritter, Uwe | Zeitschriftenaufsatz |
| 2017 | Influence of feedstock powder modification by heat treatments on the properties of APS-sprayed Al2O3-40%TiO2 coatings
Berger, Lutz-Michael; Vaßen, Robert; Sohn, Yoo Jung | Konferenzbeitrag |
| 2017 | Influence of post-treatment on the microstructural and tribomechanical properties of suspension thermally sprayed WC-12 wt%Co nanocomposite coatings
Ali, O.; Ahmed, R.; Faisal, N.H.; Alazani, N.M.; Berger, Lutz-Michael; Kaiser, Arno; Toma, Filofteia-Laura; Polychroniadis, E.K.; Sall, M.; Elakwah, Y.O.; Goosen, M.F.A. | Zeitschriftenaufsatz |
| 2017 | Influence of temperature and steam content on degradation of metallic interconnects in reducing atmosphere
Folgner, Christoph; Sauchuk, Viktar; Kusnezoff, Mihails; Michaelis, Alexander | Konferenzbeitrag |
| 2017 | Influence of the anode graphite particle size on the SEI film formation in lithium-ion cells
Reinke, Christian; Nikolowski, Kristian; Wolter, Mareike; Michaelis, Alexander | Aufsatz in Buch |
| 2017 | Insights into the buffer effect observed in blended lithium insertion electrodes
Heubner, Christian; Liebmann, Tobias; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Integration of piezoceramic composites in aluminium die casting structures and their functional characterization
Rhein, Sebastian; Wedler, Jonathan; Stein, Stefan; Körner, Carolin; Schmidt, Michael; Michaelis, Alexander; Gebhardt, Sylvia | Konferenzbeitrag |
| 2017 | Integrierte Strukturüberwachung sicherheitsrelevanter Fahrzeugkomponenten aus kohlefaserverstärkten Kunststoffverbundwerkstoffen
Tschöke, Kilian; Gaul, Tobias; Dungern, Friedrich von; Schubert, Lars | Konferenzbeitrag |
| 2017 | Integrierte Versuchsmethode zur Analyse des Matrizenfüllprozesses beim uniaxialen Trockenpressen
Glöß, Bianca; Fries, Manfred; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Intelligent signal processing on a miniaturized hardware module
Tschöpe, Constanze; Duckhorn, Frank; Richter, Christian; Blüthgen, Peter; Wolff, Matthias | Konferenzbeitrag |
| 2017 | Intense red-green up-conversion emission and their mechanisms of SrO: Er3+/Yb3+, Gd3+, Lu3+, Bi3+
Fu, Jipeng; Pang, Ran; Jia, Yonglei; Sun, Wenzhi; Jiang, Lihong; Zhang, Su; Li, Chengyu | Zeitschriftenaufsatz |
| 2017 | Interaction with spectral consequences between TM+ type cations located in oxide glass hosts
Goldstein, Adrian; Vulfson, Marina; Shames, Alex; Katz, Michael; Räthel, Jan | Zeitschriftenaufsatz |
| 2017 | Interconnect Corrosion in Steam Containing Fuel Gas
Folgner, Christoph; Sauchuk, Viktar; Megel, Stefan; Kusnezoff, Mihails; Michaelis, Alexander | Konferenzbeitrag |
| 2017 | Interplay between wet-dry-cycles and corrosion initiation due to chloride accumulation on AA1050 - A simple experimental approach
Schneider, M.; Ferl, S.; Langklotz, U. | Konferenzbeitrag |
| 2017 | Investigations of burning phenomena during the hard anodising of aluminium by local in-operando temperature measurements
Lämmel, Christoph; Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Ionically conductive polymer/ceramic separator for lithium-sulfur batteries
Freitag, Anne; Langklotz, Ulrike; Rost, Axel; Stamm, Manfred; Ionov, Leonid | Zeitschriftenaufsatz |
| 2017 | Iridium nanoparticles anchored on 3D graphite foam as a bifunctional electrocatalyst for excellent overall water splitting in acidic solution
Zhang, Jian; Wang, Gang; Liao, Zhongquan; Zhang, Panpan; Wang, Faxing; Zhuang, Xiaodong; Zschech, Ehrenfried; Feng, Xinliang | Zeitschriftenaufsatz |
| 2017 | Kombination aktiver Werkstoffe und additiver Fertigung für alternative Implantatkonzepte
Rotsch, Christian; Töppel, Thomas; Gille, Katarina; Hunger, Sandra; Werner, Michael; Müller, Bernhard; Lausch, Holger | Vortrag |
| 2017 | A laser speckle photometry based non-destructive method for measuring stress conditions in direct-copper-bonded ceramics for power electronic application
Münch, Stefan; Röllig, Mike; Cikalova, Ulana; Bendjus, Beatrice; Chen, Lili; Lautenschläger, Georg; Sudip, Shohag Roy | Konferenzbeitrag |
| 2017 | Laser-based functionalization of electronic multi-material-layers for embedded sensors
Vedder, Christian; Wollgarten, Susanne; Gradmann, Rena; Stollenwerk, Jochen Hugo; Wissenbach, Konrad; Eberstein, Markus | Zeitschriftenaufsatz |
| 2017 | Lifetime vs. rate capability: Understanding the role of FEC and VC in high-energy Li-ion batteries with nano-silicon anodes
Jaumann, Tony; Balach, Juan; Langklotz, Ulrike; Sauchuk, Viktar; Fritsch, Marco; Teltevskij, Valerij; Oswald, Steffen; Klose, Markus; Stephani, Günter; Hauser, Ralf; Michaelis, Alexander; Eckert, Jürgen; Giebeler, Lars | Zeitschriftenaufsatz |
| 2017 | Lithium loss indicated formation of microcracks in LATP ceramics
Wätzig, Katja; Rost, Axel; Langklotz, Ulrike; Schilm, Jochen | Konferenzbeitrag |
| 2017 | Lithography-based ceramic manufacturing (LCM) - Viscosity and cleaning as two quality influencing steps in the process chain of printing green parts
Schwarzer, Eric; Götz, Michael; Markova, D.; Stafford, D.; Scheithauer, Uwe; Moritz, Tassilo | Zeitschriftenaufsatz |
| 2017 | Low ppm failure analysis for advanced Cu and Cu alloy on-chip wiring
Kraatz, Matthias; Hauschildt, Meike; Gall, Martin; Zschech, Ehrenfried | Konferenzbeitrag |
| 2017 | Low temperature stability of 4O martensite in Ni49.1Mn38.9Sn12 metamagnetic Heusler alloy ribbons
Czaja, Paweł; Przewoźnik, Janusz; Gondek, Łukasz; Hawełek, Łukasz; Żywczak, Antoni; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2017 | Macro-mixing characterisation of a stirred model fermenter of non-Newtonian liquid by flow following sensor particles and ERT
Reinecke, Sebastian; Deutschmann, Anne; Jobst, Karin; Hampel, Uwe | Zeitschriftenaufsatz |
| 2017 | Manufacturing and properties of tungsten carbide-oxide composites
Vornberger, Anne; Pötschke, Johannes; Berger, Christian | Konferenzbeitrag |
| 2017 | Material- and process hybridization for multifunctional ceramic and glass components
Moritz, Tassilo; Scheithauer, Uwe; Mannschatz, Anne; Ahlhelm, Matthias; Abel, Johannes; Schwarzer, Eric; Pohl, Markus; Müller-Köhn, Axel | Zeitschriftenaufsatz |
| 2017 | Mehrlagenkeramik und Keramikspritzguss
Ziesche, Steffen; Lenz, Christian; Müller-Köhn, Axel | Zeitschriftenaufsatz |
| 2017 | Metal uptake and distribution in the zebrafish (Danio rerio) embryo: Differences between nanoparticles and metal ions
Böhme, Steffi; Baccaro, Marta; Schmidt, Matthias; Potthoff, Annegret; Stärk, Hans-Joachim; Reemtsma, Thorsten; Kühnel, Dana | Zeitschriftenaufsatz |
| 2017 | Metall-keramische Verbundwerkstoffe: Papiertechnologische Verfahren zur Herstellung metall-keramischer Verbundwerkstoffe
Zelm, Roland; Greiffenberg, Ina; Wagenführ, André; Moritz, Tassilo; Günther, Anne; Michaelis, Alexander; Slawik, Tim | Zeitschriftenaufsatz |
| 2017 | Method for the development of realistic boundary conditions for the simulation of non-contact tonometry
Münch, Stefan; Balzani, Daniel; Röllig, Mike; Spörl, Eberhard | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2017 | Micro-patterning by thermoplastic forming of Ni-free Ti-based bulk metallic glasses
Bera, Supriya; Sarac, Baran; Balakin, Sascha; Ramasamy, Parthiban; Stoica, Mihai; Cǎlin, Mariana; Eckert, Jürgen | Zeitschriftenaufsatz |
| 2017 | Microelectrochemical investigation of anodic oxide formation on the aluminum alloy AA2024
Schneider, Michael; Liebmann, Tobias; Langklotz, Ulrike; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Micropatterning kinetics of different glass-forming systems investigated by thermoplastic net-shaping
Sarac, Baran; Bera, Supriya; Spieckermann, Florian; Balakin, Sascha; Stoica, Mihai; Cǎlin, Mariana; Eckert, Jürgen | Zeitschriftenaufsatz |
| 2017 | Microstructural characteristics and performances of Cr2O3 and Cr2O3-15%TiO2 S-HVOF coatings obtained from water-based suspensions
Toma, Filofteia-Laura; Kulissa, Nick; Langner, Stefan; Potthoff, Annegret; Barbosa, Maria M.; Leyens, Christoph | Konferenzbeitrag |
| 2017 | Microstructural evolution during sintering of cermets studied using interrupted sintering experiments and novel 2D and 3D FESEM based techniques
Pötschke, Johannes; Höhn, Sören; Richter, Volkmar; Mayer, Markus | Zeitschriftenaufsatz |
| 2017 | Microstructural investigation of diamond-SiC composites produced by pressureless silicon infiltration
Matthey, Björn; Höhn, Sören; Wolfrum, Anne-Kathrin; Mühle, Uwe; Motylenko, Mykhaylo; Rafaja, David; Michaelis, Alexander; Herrmann, Mathias | Zeitschriftenaufsatz |
| 2017 | Miniaturised flame ionisation detector for explosion protection in civil sewerage networks
Förster, Jan; Kuipers, Winfred; Koch, Christian; Lenz, Christian; Ziesche, Steffen; Jurkow, Dominik | Konferenzbeitrag |
| 2017 | Monitoring of welded seams on the foundations of offshore wind turbines
Weihnacht, Bianca; Frankenstein, Bernd; Gaul, Tobias; Neubeck, Robert; Schubert, Lars | Zeitschriftenaufsatz |
| 2017 | A multi technique study of a new lithium disilicate glass-ceramic spray-coated on ZrO2 substrate for dental restoration
Möncke, Doris; Ehrt, Roland; Palles, Dimitrios; Efthimiopoulos, Ilias; Kamitsos, Efstratios I.; Johannes, Martina | Zeitschriftenaufsatz |
| 2017 | Multi-material approach to integrate ceramic boxed sensors and actuators in laser beam melted structures for tailored smart bio applications
Lausch, Holger; Töppel, Thomas; Brand, Michael; Hensel, Eric; Arnold, Michael; Rotsch, Christian; Gronde, Bernd | Vortrag |
| 2017 | Novel ceramic composites for personalized 3D-structures
Ahlhelm, Matthias; Schwarzer, Eric; Scheithauer, Uwe; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Novel thermocouples for temperature measurement in automotive applications
Gierth, Paul; Rebenklau, Lars; Augsburg, Klaus; Niedermeyer, Lars; Bachmann, Eric | Konferenzbeitrag |
| 2017 | Optimization of ESC performance for co-electrolysis operation
Trofimenko, Nikolai; Kusnezoff, Mihails; Michaelis, Alexander | Konferenzbeitrag |
| 2017 | Optimization of the temperature program to scale up the stabilization of polyacrylonitrile fibers
Meinl, Juliane; Schönfeld, Katrin; Kirsten, Martin; Kittler, Karsten; Michaelis, Alexander; Cherif, Chokri | Zeitschriftenaufsatz |
| 2017 | Pan-European inter-laboratory studies on a panel of in vitro cytotoxicity and pro-inflammation assays for nanoparticles
Piret, Jean-Pascal; Bondarenko, Olesja M.; Boyles, Matthew S.P.; Himly, Martin; Ribeiro, Ana R.; Benetti, Federico; Smal, Caroline; Lima, Braulio; Potthoff, Annegret; Simion, Monica; Dumortier, Elise; Leite, Paulo Emilio C.; Balottin, Luciene Bottentuit; Granjeiro, José Mauro; Ivask, Angela; Kahru, Anne; Radauer-Preiml, Isabella; Tischler, Ulrike; Duschl, Albert; Saout, Christelle; Anguissola, Sergio; Haase, Andrea; Jacobs, An; Nelissen, Inge; Misra, Superb K.; Toussaint, Olivier | Zeitschriftenaufsatz |
| 2017 | Particle reinforced open porous anodizing layers on AA5005
Schneider, Michael; Kremmer, Kerstin; Weidmann, Stefanie; Fürbeth, Wolfram | Zeitschriftenaufsatz |
| 2017 | Phase transformation in AFM silicon tips
Kopycinska-Müller, Malgorzata; Barth, Martin; Küttner, Martin; Köhler, Bernd | Zeitschriftenaufsatz |
| 2017 | Physikalische Werkstoffdiagnostik
Bauch, Jürgen; Rosenkranz, Rüdiger | Buch |
| 2017 | Point focusing with flat and wedged crossed multilayer Laue lenses
Kubec, Adam; Melzer, Kathleen; Gluch, Jürgen; Niese, Sven; Braun, Stefan; Patommel, Jens; Burghammer, Manfred; Leson, Andreas | Zeitschriftenaufsatz |
| 2017 | Precursor-basierte Darstellung von Magnéli-Phasen TinO2n-1 für die Anwendung als Thermeoelektrikum
Conze, Susan
: Grin, Juri (Gutachter); Michaelis, Alexander (Gutachter); Kinski, Isabel (Betreuer) | Dissertation |
| 2017 | Preface - Journal of Ceramic Science and Technology 1/2017. Special Issue, 6th International Congress on Ceramics (ICC6)
Michaelis, A. | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2017 | Preparation and TEM characterization of interfaces in co-sintered metal-ceramic composites
Mühle, Uwe; Günther, Anne; Standke, Yvonne; Moritz, Tassilo; Gluch, Jürgen; Zschech, Ehrenfried | Poster |
| 2017 | Pressureless sintering of ZrC with variable stoichiometry
Schönfeld, Katrin; Martin, Hans-Peter; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | A process chain for integrating piezoelectric transducers into aluminum die castings to generate smart lightweight structures
Stein, Stefan; Wedler, Jonathan; Rhein, Sebastian; Schmidt, Michael; Körner, Carolin; Michaelis, Alexander; Gebhardt, Sylvia | Zeitschriftenaufsatz |
| 2017 | Quantitative crystallographic analysis of individual carbon nanofibers using high resolution transmission electron microscopy and electron diffraction
Seyring, Martin; Simon, Adrian; Voigt, Ingolf; Ritter, Uwe; Rettenmayr, Markus | Zeitschriftenaufsatz |
| 2017 | Rate controlled sintering of binderless tungsten carbide
Hennicke, J.; Kessel, T.; Poetschke, J.; Vornberger, A. | Konferenzbeitrag |
| 2017 | Reconfigurable germanium transistors with low source-drain leakage for secure and energy-efficient doping-free complementary circuits
Trommer, Jens; Heinzig, André; Slesazeck, Stefan; Mühle, Uwe; Löffler, Markus; Walter, Dennis; Mayr, Christian Georg; Mikolajick, Thomas; Weber, Walter Michael | Konferenzbeitrag |
| 2017 | Reducing uncertainty and confronting ignorance about the possible impacts of weathering plastic in the marine environment
Jahnke, Annika; Potthoff, Annegret; Arp, Hans Peter H.; Escher, Beate I.; Gewert, Berit; Gorokhova, Elena; Kühnel, Dana; Ogonowski, Martin; Rummel, Christoph Daniel; Schmitt-Jansen, Mechthild; Toorman, Erik; MacLeod, Matthew | Zeitschriftenaufsatz |
| 2017 | Reversible heat generation rates of blended insertion electrodes
Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Review Article: Recommended reading list of early publications on atomic layer deposition - outcome of the "Virtual Project on the History of ALD"
Ahvenniemi, Esko; Akbashev, Andrew R.; Ali, Saima; Bechelany, Mikhael C.; Berdova, Maria; Boyadjiev, Stefan; Cameron, David; Chen, Rong; Chubarov, Mikhail; Cremers, Véronique; Devi, Anjana; Drozd, V.E.; El’nikova, Liliya; Gottardi, Gloria; Grigoras, Kestutis; Hausmann, Dennis; Hwang, Cheolseong; Jen, Shihhui; Kallio, Tanja; Kanervo, Jaana; Khmelnitskiy, Ivan; Kim, Dohan; Klibanov, Lev; Koshtyal, Yury; Krause, A. Outi; Kuhs, Jakob; Kärkkänen, Irina; Kääriäinen, Marja Leena; Kääriäinen, Tommi; Lamagna, Luca; Łapicki, Adam; Leskelä, Markku; Lipsanen, Harri; Aav, Jussi; Malkov, Anatoly; Malygin, Anatoly; Mennad, Abdelkader; Militzer, Christian; Molarius, Jyrki; Norek, Małgorzata; Ozgit-Akgun, Cagla; Panov, Mikhail; Pedersen, Henrik; Piallat, Fabien; Popov, Georgi; Puurunen, Riikka; Rampelberg, Geert; Ras, Robin; Rauwel, Erwan; Roozeboom, Fred; Sajavaara, Timo; Salami, Hossein; Savin, Hele; Schneider, Nathanaëlle; Seidel, Thomas E.; Sundqvist, Jonas; Suyatin, Dmitry B.; Törndahl, Tobias; Ommen, | Zeitschriftenaufsatz |
| 2017 | Riss- und Schadenssanierung von Betonwerkstein mittels Expansionstechnologie
Hoyer, Thomas | Aufsatz in Buch |
| 2017 | Sauerstoff-liefernde Keramiken für Verbrennungsprozesse
Kriegel, Ralf | Zeitschriftenaufsatz |
| 2017 | Scale-up of mixing processes of highly concentrated suspensions using electrical resistance tomography
Lomtscher, Annett; Jobst, Karin; Fogel, Stefan; Rostalski, Kay; Stempin, Silke; Kraume, Matthias | Zeitschriftenaufsatz |
| 2017 | Schichten aus Kohlenstoff-Nanomaterialien auf asymmetrisch porösen, keramischen Trägern und deren Erprobung für Anwendungen in Membrantechnik und Katalyse
Simon, Adrian
: Ritter, Uwe; Rädlein, Edda (Gutachter); Voigt, Ingolf (Gutachter); Michaelis, Alexander (Hrsg.) | Dissertation |
| 2017 | Self-healing EBC material for gas turbine applications
Kunz, Willy; Klemm, Hagen | Konferenzbeitrag |
| 2017 | Sensorfunktion im Faserverbund
Lätzsch, Hans-Joachim; Modler, Niels; Geller, Sirko; Weißenborn, Oliver; Röllig, Mike; Schwerz, Robert; Müller, Uwe; Sauer, Sebastian | Zeitschriftenaufsatz |
| 2017 | SiC-bonded diamond materials produced by pressureless silicon infiltration
Matthey, Björn; Herrmann, Mathias; Hörner, Martin; Geldern, Maike van; Kunze, Steffen; Blug, Bernhard; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Sinter kinetics and interface reactions of silver thick films on aluminium nitride
Marcinkowski, Manja; Schwab, Olga; Schmidt, Richard; Eberstein, Markus; Partsch, Uwe | Konferenzbeitrag |
| 2017 | A smart eddy current sensor dedicated to the nondestructive evaluation of carbon fibers reinforced polymers
Naidjate, Mohammed; Helifa, Bachir; Feliachi, Mouloud; Lefkaier, Iben-Khaldoun; Heuer, Henning; Schulze, Martin | Zeitschriftenaufsatz |
| 2017 | Solid state sintered nanoscaled hardmetals and their properties
Pötschke, Johannes; Säuberlich, Tino | Konferenzbeitrag |
| 2017 | State transition and electrocaloric effect of BaZrxTi1-xO3: Simulation and experiment
Ma, Yangbin; Molin, Christian; Shvartsman, Vladimir; Gebhardt, Sylvia; Lupascu, Doru Constantin; Albe, Karsten; Xu, Baixiang | Zeitschriftenaufsatz |
| 2017 | Structural integration of sensors / actuators by laser beam melting for tailored smart components
Töppel, Thomas; Lausch, Holger; Brand, Michael; Hensel, Eric; Arnold, Michael; Rotsch, Christian | Vortrag |
| 2017 | Structural relaxation phenomena in silicate glasses modified by irradiation with femtosecond laser pulses
Seuthe, Thomas; Mermillod-Blondin, Alexandre; Grehn, Moritz; Bonse, Jörn; Wondraczek, Lothar; Eberstein, Markus | Zeitschriftenaufsatz |
| 2017 | Study of a particle based films cure process by high-frequency eddy current spectroscopy
Patsora, Iryna; Heuer, Henning; Hillmann, Susanne; Tatarchuk, Dmitrii | Zeitschriftenaufsatz |
| 2017 | Study of WC- and Cr3C2-containing hardmetal compositions for thermal spray coatings
Berger, Lutz-Michael; Sassatelli, Paolo; Pötschke, Johannes; Puddu, Pietro | Konferenzbeitrag |
| 2017 | Synthese und Charakterisierung von Galliumoxidnitriden
Oberländer, Andreas
: Michaelis, Alexander (Gutachter); Huppertz, Hubert (Gutachter); Kinski, Isabel (Betreuer) | Dissertation |
| 2017 | Synthesis, formulation, rapid curing of particle-based inkjet/aerosol-jet printed films for electronic and sensory devices
Fritsch, Marco; Vinnichenko, Mykola; Sauchuk, Viktar; Trofimenko, Nikolai | Poster |
| 2017 | System zur drahtlosen Übertragung von Energie und/oder Signalen, der Wandlung der Energie und/oder Signale in andere Energieformen und/oder Signalformen sowie deren Applizierung und Detektion in peripheren Bereichen des Systems
Lausch, Holger; Brand, Michael; Arnold, Michael | Patent |
| 2017 | Ta-Ni- and Ti-Al-braze-alloys for high temperature stable ceramic - ceramic junctions
Roszeitis, Sven | Vortrag |
| 2017 | Target preparation and characterization of interfaces in co-sintered metal ceramic composites using imaging and analytical Transmission Electron Microscopy
Mühle, Uwe; Günther, Anne; Standke, Yvonne; Moritz, Tassilo; Herrmann, Mathias; Gluch, Jürgen; Zschech, Ehrenfried | Aufsatz in Buch |
| 2017 | Temperature induced compositional redistribution in blended insertion electrodes
Heubner, Christian; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Theranostische Implantate - Wie können sie die endoprothetische Versorgung in Zukunft unterstützen?
Rotsch, Christian; Lausch, Holger | Vortrag |
| 2017 | Thermal behaviour of cermets and hardmetals during debinding and sintering
Gestrich, Tim; Kaiser, Arno; Pötschke, Johannes; Meinl, Juliane; Höhn, Sören | Konferenzbeitrag |
| 2017 | Thermally induced metallurgical processes in Cr3C2-NiCr thermal spray coatings as a function of carbide dissolution
Matthews, Steven; Asadov, A.; Ruddell, S.; Berger, Lutz-Michael | Zeitschriftenaufsatz |
| 2017 | Thermoelektrische Messvorrichtung und ihre Verwendung
Wodtke, Axel; Niedermeyer, Lars; Augsburg, Klaus; Bechtold, Franz; Rebenklau, Lars; Irrgang, Klaus; Lippmann, Lutz | Patent |
| 2017 | Thermoelektrisches Element sowie ein Verfahren zu dessen Herstellung
Rebenklau, Lars; Gierth, Paul; Wodtke, Axel; Niedermeyer, Lars; Augsburg, Klaus | Patent |
| 2017 | Towards an autarkic embedded cognitive user interface
Duckhorn, Frank; Huber, Markus; Meyer, Werner; Jokisch, Oliver; Tschöpe, Constanze; Wolff, Matthias | Konferenzbeitrag |
| 2017 | Towards next-generation sequencing-based identification of norovirus recognition elements and microfluidic array using phage display technology
Pahlke, Claudia
: Vollmer, Günter (1. Prüfer); Cuniberti, Gianaurelio (2. Prüfer); Opitz, Jörg (Betreuer); Baraban, Larysa (Betreuer); Szardenings, Michael (Betreuer) | Dissertation |
| 2017 | Ultraschallbasierte Analyse des Lagenaufbaus von CFK
Meyer, Jean
: Heuer, Henning (Betreuer) | Dissertation |
| 2017 | Untersuchung der Hydrodynamik von ovalen Biogasreaktoren mit instrumentierten Strömungsfolgern
Reinecke, Sebastian Felix; Jobst, Karin; Hampel, Uwe | Zeitschriftenaufsatz |
| 2017 | Untersuchung der Hydrodynamik von ovalen Biogasreaktoren mit instrumentierten Strömungsfolgern. Corrigendum
Reinecke, Sebastian; Jobst, Karin; Hampel, Uwe | Zeitschriftenaufsatz |
| 2017 | Untersuchung des Anwendungspotenzials der Hochfrequenzwirbelstrommesstechnik zur Charakterisierung dielektrischer Eigenschaften von Epoxidharzen und Faserverbundmaterialien
Gäbler, Simone
: Heinrich, Gert (Betreuer); Heuer, Henning (Betreuer) | Dissertation |
| 2017 | Untersuchungen an zugfesten Pressverbindungen für Fahrleitungsanlagen
Schlegel, Stephan; Pfeifer, Stephanie; Großmann, Steffen; Herzog, Thomas; Walter, Susan; Heuer, Henning; Kurzweil, Franz | Zeitschriftenaufsatz |
| 2017 | Validation of different SAC305 material models calibrated on isothermal tests using in-situ TMF measurement of thermally induced shear load
Kuczynska, Marta; Schafet, Natalja; Becker, Ulrich; Metasch, René; Röllig, Mike; Kabakchiev, Alexander; Weihe, Stefan | Konferenzbeitrag |
| 2017 | Verbundkörper mit mindestens einer Funktionskomponente und ein Verfahren zur Herstellung eines Verbundkörpers
Lausch, Holger; Herrmann, Mathias; Gronde, Bernd; Töppel, Thomas; Petters, Romy | Patent |
| 2017 | Verdeckte Fehleranzeigen erkennen
Heilmann, Stephan; Maaß, Michael | Zeitschriftenaufsatz |
| 2017 | Verfahren und Vorrichtung zum Betrieb einer Gasturbine mit nasser Verbrennung
Kriegel, Ralf | Patent |
| 2017 | Verfahren zur Bestimmung einer Strahlendosis und Produkt
Schuster, Christiane; Härtling, Thomas | Patent |
| 2017 | Verfahren zur Produktkontrolle und Produktkörper
Härtling, Thomas | Patent |
| 2017 | Verfahren zur Trockenbeschichtung von Trägern
Hoffmann, Robert; Jäger, Benjamin; Pippardt, Ute; Vogel, Andy | Patent |
| 2017 | Verification and characterization of an alternative low density lipoprotein receptor-related protein 1 splice variant
Kolb, Marlen; Kurz, Susanne; Schäfer, Angelika; Huse, Klaus; Dietz, Andreas; Wichmann, Gunnar; Birkenmeier, Gerd | Zeitschriftenaufsatz |
| 2017 | Visualization of the internal structure of Didymosphenia geminata frustules using nano X-ray tomography
Zglobicka, Izabela; Li, Qiong; Gluch, Jürgen; Płocińska, Magdalena; Noga, Teresa; Dobosz, Romuald; Szoszkiewicz, Robert; Witkowski, Andrzej; Zschech, Ehrenfried; Kurzydłowski, Krzysztof J. | Zeitschriftenaufsatz |
| 2017 | Volume imaging NDE and serial sectioning of carbon fiber composites
Hakim, Issa; Schumacher, David; Sundar, Veeraraghavan; Donaldson, Steven L.; Creuz, Aline; Schneider, Rainer; Keller, Juergen; Browning, Charles E.; May, Daniel; Ras, Mohamad Abo; Meyendorf, Norbert G.H. | Konferenzbeitrag |
| 2017 | Vorrichtung und Verfahren zur Behandlung von Abgasen in Einzelraumfeuerungsanlagen
Adler, Jörg; Petasch, Uwe; Haase, Daniela; Hark, Werner; Hark, Udo | Patent |
| 2017 | Vorrichtung und Verfahren zur Bestimmung eines medizinischen Gesundheitsparameters eines Probanden mittels Stimmanalyse
Saeltzer, Gerhard; Tschöpe, Constanze; Wolff, Matthias | Patent |
| 2017 | Waste heat energy harvesting by use of BaTiO3 for pyroelectric hydrogen generation
Belitz, R.; Meisner, P.; Coeler, Matthias; Wunderwald, U.; Friedrich, Jochen; Zosel, J.; Schelter, Matthias; Jachalke, Sven; Mehner, Erik | Zeitschriftenaufsatz |
| 2017 | WEATHER-MIC - How microplastic weathering changes its transport, fate, and toxicity in the marine environment
Jahnke, Annika; MacLeod, Matthew; Potthoff, Annegret; Toorman, Erik; Arp, Hans Peter H. | Konferenzbeitrag |
| 2017 | Wettability of tungsten carbide by liquid binders in WC-Co cemented carbides: Is it complete for all carbon contents?
Konyashin, Igor; Zaitsev, Alexander A.; Sidorenko, Daria A.; Levashov, Evgeny A.; Ries, Bernd; Konischev, S.N.; Sorokin, M.; Mazilkin, Andrei A.; Herrmann, Mathias; Kaiser, Arno | Zeitschriftenaufsatz |
| 2017 | Why not using ceramics - trends from ceramics research
Stepanyan, Marina; Seifert, Gerhard; Weiß, Torsten; Klein, Tiago Borsoi; Freund, Susanne | Zeitschriftenaufsatz |
| 2017 | Zeolite membranes: Functionalizing of properties by tailored compositions
Richter, Hannes; Weyd, Marcus; Simon, Adrian; Kühnert, Jan-Thomas; Günther, Christiane; Voigt, Ingolf; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Zirkonoxid-Keramik, zellularer Werkstoff daraus und Verfahren zur Herstellung der Zirkonoxid-Keramik
Adler, Jörg; Haase, Daniela; Standke, Gisela | Patent |
| 2016 | 2-D crossed-electrode transducer arrays for ultrasonic particle manipulation
Wang, Han; Qiu, Yongqiang; Démoré, Christine; Gebhardt, Sylvia; Cochran, Sandy | Konferenzbeitrag |
| 2016 | Active electrocaloric demonstrator for direct comparison of PMN-PT bulk and multilayer samples
Blumenthal, Philipp; Molin, Christian; Gebhardt, Sylvia; Raatz, Annika | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2016 | Adaption of functional ceramic materials for the laser sintering process in integrated sensor applications
Gradmann, Rena; Seuthe, Thomas; Vedder, Christian; Eberstein, Markus; Partsch, Uwe | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2016 | Adaption of functional ceramic materials for the laser sintering process in integrated sensor applications
Gradmann, Rena; Seuthe, Thomas; Vedder, Christian; Eberstein, Markus; Partsch, Uwe | Zeitschriftenaufsatz |
| 2016 | Additive Herstellung keramischer und metall-keramischer Bauteile
Scheithauer, Uwe; Schwarzer, Eric; Gradmann, Rena; Pohl, Markus; Moritz, Tassilo; Eberstein, Markus; Michaelis, Alexander | Poster |
| 2016 | Additive Herstellung mehrkomponentiger metallischer und keramischer Bauteile mittels thermoplastischen 3D-Druckes (T3DP)
Härtel, Anja; Scheithauer, Uwe; Schwarzer, Eric; Weingarten, Steven; Slawik, Tim; Richter, Hans-Jürgen; Moritz, Tassilo | Zeitschriftenaufsatz |
| 2016 | Additive Manufacturing and Strategic Technologies in Advanced Ceramics
: Shimamura, Kiyoshi (Ed.); Kirihara, Soshu (Ed.); Akedo, Jun (Ed.); Ohji, Tatsuki (Ed.); Naito, Makio (Ed.); Singh, Mrityunjay (Vol. Ed.); Ohji, Tatsuki (Vol. Ed.); Michaelis, Alexander (Vol. Ed.) | Tagungsband |
| 2016 | Additive manufacturing of ceramic components using powder bed and suspension methods
Richter, Hans-Jürgen; Moritz, Tassilo; Scheithauer, Uwe; Ahlhelm, Matthias; Schwarzer, Eric | Zeitschriftenaufsatz |
| 2016 | Advanced and Refractory Ceramics for Energy Conservation and Efficiency
: Lin, Hua-Tay (Ed.); Hemrick, James (Ed.); Singh, Mrityunjay (Vol. Ed.); Ohji, Tatsuki (Vol. Ed.); Michaelis, Alexander (Vol. Ed.) | Tagungsband |
| 2016 | Advances in solid oxide fuel cells and electronic ceramics
: Bansal, Narottam P. (Ed.); Kusnezoff, Mihails (Ed.); Shimamura, Kiyoshi (Ed.) | Tagungsband |
| 2016 | Aktivlöten von Keramik: Erhitzungsmikroskopie und komplexe thermische Analyse in hochreinen Atmosphären
Gestrich, Tim; Kaiser, Arno; Meinl, Juliane; Schilm, Jochen; Linseis, Florian; Seibt, Sebastian; Gollner, Michael | Zeitschriftenaufsatz |
| 2016 | Al in ZnO - from doping to alloying. An investigation of Al electrical activation in relation to structure and charge transport limits
Cornelius, Steffen; Vinnichenko, Mykola | Zeitschriftenaufsatz |
| 2016 | Amorphous, turbostratic and crystalline carbon membranes with hydrogen selectivity
Wollbrink, Alexander; Volgmann, Kai; Koch, Jason A.; Kanthasamy, Karthiga; Tegenkamp, Christoph; Li, Yun; Richter, Hannes R.; Kämnitz, Susanne; Steinbach, Frank; Feldhoff, Armin; Caro, Jürgen | Zeitschriftenaufsatz |
| 2016 | Autartec®-Systeme zur dezentralen Wasseraufbereitung
Faßauer, Burkhardt | Zeitschriftenaufsatz |
| 2016 | Automated detection of yarn orientation in 3D-draped carbon fiber fabrics and preforms from eddy current data
Bardl, Georg; Nocke, Andreas; Cherif, Chokri; Pooch, Matthias; Schulze, Martin H.; Heuer, Henning; Schiller, Marko; Kupke, Richard; Klein, Marcus | Zeitschriftenaufsatz |
| 2016 | Automatische 3D-Drapieranalyse und Fadenrichtungsbestimmung für technische Textilien
Bardl, Georg; Weise, Daniel; Nocke, Andreas; Cherif, Chokri; Pooch, Matthias; Schulze, Martin; Heuer, Henning; Schiller, Marko | Zeitschriftenaufsatz |
| 2016 | Basisprojekt: Smart Tools for Smart Design
Weisheit, Linda; Wolf, Julia; Biedermann, Miriam; Schönecker, Andreas | Bericht |
| 2016 | Binary WC- and Cr3C2-containing hardmetal compositions for thermally sprayed coatings
Berger, Lutz-Michael | Konferenzbeitrag |
| 2016 | Bonding structure and morphology of chromium oxide films grown by pulsed-DC reactive magnetron sputter deposition
Gago, R.; Vinnichenko, Mykola; Hübner, René; Redondo-Cubero, Andrés | Zeitschriftenaufsatz |
| 2016 | Brazing of kovar to alumina and LTCC for integration of ceramic pressure sensors
Schilm, Jochen; Pönicke, Andreas; Goldberg, Adrian; Partsch, Uwe; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | Carbon membrane gas separation of binary CO2 mixtures at high pressure
Kruse, N.; Schießer, Y.; Kämnitz, Susanne; Richter, Hannes R.; Voigt, Ingolf; Braun, G.; Repke, Jens Uwe | Zeitschriftenaufsatz |
| 2016 | Ceramic and metal-ceramic components with graded microstructure
Scheithauer, Uwe; Schwarzer, Eric; Otto, Christian; Slawik, Tim; Moritz, Tassilo; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | Ceramic substrate technology for wafer level packaging of MEMS
Ziesche, Steffen; Ihle, Martin; Gabler, Felix; Roscher, Frank | Konferenzbeitrag |
| 2016 | Ceramics for Energy Conversion, Storage, and Distribution Systems
: Pfeifer, Thomas (Ed.); Matyás, Josef (Ed.); Balaya, Palani (Ed.); Singh, Dileep (Ed.); Wei, John (Ed.); Singh, Mrityunjay (Vol. Ed.); Ohji, Tatsuki (Vol. Ed.); Michaelis, Alexander (Vol. Ed.) | Tagungsband |
| 2016 | Ceramics for Environmental Systems
: Wang, Liazhou (Ed.); Imanak, Nobuhito (Ed.); Kriven, Waltraud M. (Ed.); Fukushima, Manabu (Ed.); Kale, Girish (Ed.); Singh, Mrityunjay (Vol. Ed.); Ohji, Tatsuki (Vol. Ed.); Michaelis, Alexander (Vol. Ed.) | Tagungsband |
| 2016 | CFY-Stacks: Progress in Development
Megel, Stefan; Kusnezoff, Mihails; Beckert, Wieland; Trofimenko, Nikolai; Dosch, Christian; Weder, Aniko; Jahn, Matthias; Michaelis, Alexander; Bienert, Christian; Brandner, Marco; Skrabs, Stefan; Schulmeyer, Werner; Sigl, Lorenz S. | Poster |
| 2016 | CFY-Stacks: Progress in Development
Megel, Stefan; Kusnezoff, Mihails; Beckert, Wieland; Trofimenko, Nikolai; Dosch, Christian; Weder, Aniko; Jahn, Matthias; Michaelis, Alexander; Bienert, Christian; Brandner, Marco; Skrabs, Stefan; Schulmeyer, Werner; Sigl, Lorenz S. | Konferenzbeitrag |
| 2016 | Characteristics of wet-spun and thermally treated poly acrylonitrile fibers
Kirsten, Martin; Meinl, Juliane; Schönfeld, Katrin; Michaelis, Alexander; Cherif, Chokri | Zeitschriftenaufsatz |
| 2016 | Characterization of anodic bondable LTCC for wafer-level packaging
Hu, Xiaodong; Bäuscher, Manuel; MacKowiak, Piotr; Zhang, Yucheng; Hoelck, Ole; Walter, Hans; Ihle, Martin; Ziesche, Steffen; Hansen, Ulli; Maus, Simon; Gyenge, Oliver; Mukhopadhyay, Biswajit; Ehrmann, Oswin; Lang, Klausdieter; Ngo, Haduong | Konferenzbeitrag |
| 2016 | Characterization of polymer-based materials using fluorescence method and fractal analysis
Chapnyi, Taras; Beshchasna, Nataliia; Schreiber, Jürgen; Opitz, Jörg | Konferenzbeitrag |
| 2016 | Co-sintering behaviour of zirconia-ferritic steel composites
Slawik, Tim; Günther, Anne; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | Combinatorial approaches to evaluate nanodiamond uptake and induced cellular fate
Eldawud, Reem; Reitzig, Manuela; Opitz, Jörg; Rojansakul, Yon; Jiang, Wenjuan; Nangia, Shikha; Dinu, Cerasela Zoica Oica | Zeitschriftenaufsatz |
| 2016 | Combining metal textiles with ceramics by injection molding for novel composites with promising properties
Günther, Anne; Moritz, Tassilo; Leopold, Anne-Katrin; Hofmann, Marcel; Herfert, Heike | Konferenzbeitrag |
| 2016 | A compact readout platform for spectral-optical sensors
Wuchrer, Roland; Amrehn, Sabrina; Liu, Luhao; Wagner, Thorsten; Härtling, Thomas | Zeitschriftenaufsatz |
| 2016 | Comparison of ultrasonic phased array probes based on PMN-PT and PZT 1-3 composites
Walter, Susan; Herzog, Thomas; Schubert, Frank; Heuer, Henning | Konferenzbeitrag |
| 2016 | La competencia sobre planificación de investigaciones en 4° de ESO: Un estudio de caso
Rodríguez-Arteche, Iñigo; Martínez Aznar, Ma Mercedes; Garitagoitia, Maria Aranzazu | Zeitschriftenaufsatz |
| 2016 | Consideration of inhomogeneous shrinkages for LTCC-applications in panel-level processes
Lenz, Christian; Kappert, Sandro; Ziesche, Steffen; Neubert, Holger; Partsch, Uwe | Konferenzbeitrag |
| 2016 | Correlations between suspension formulation, drying parameters, granule structure, and mechanical properties of spray dried ceramic granules
Eckhard, Susanna; Höhn, Sören; Fries, Manfred | Aufsatz in Buch |
| 2016 | Corrosion protection of thickness reduced plasma electrolytic layers on AZ31
Schneider, Michael; Kremmer, Kerstin; Höhn, Sören | Zeitschriftenaufsatz |
| 2016 | CPI stress induced carrier mobility shift in advanced silicon nodes
Sukharev, Valeriy; Choy, Jun-Ho; Kteyan, Armen; Hovsepyan, Henrik; Mühle, Uwe; Zschech, Ehrenfried; Radojcic, Riko | Konferenzbeitrag |
| 2016 | Crystal structure, microstructure and ionic conductivity of the cost-efficient sodium solid electrolyte Na5YSi4O12
Münchgesang, Wolfram; Wagner, Dörte; Motylenko, Mykhaylo; Langklotz, Ulrike; Nestler, Tina; Vyalikh, Anastasia; Meutzner, Falk; Rost, Axel; Schilm, Jochen; Leisegang, Tilmann; Blatov, Vladislav A.; Rafaja, David; Meyer, Dirk C. | Abstract |
| 2016 | Current Trends in Ceramic Technologies and Systems
Michaelis, Alexander; Stelter, Michael; Klemm, Hagen; Voigt, Ingolf; Kriegel, Ralf | Aufsatz in Buch |
| 2016 | A dedicated illumination for full-field X-ray microscopy with multilayer Laue lenses
Niese, Sven; Braun, Stefan; Dietsch, Reiner; Gluch, Jürgen; Holz, Thomas; Huber, Norman; Kubec, Adam; Zschech, Ehrenfried | Konferenzbeitrag |
| 2016 | Definition of requirements for reference experiments to determine and evaluate various damage mechanisms in fibre composites by acoustic emission
Hönig, Ulrike; Holder, Ulrich; Pietzsch, Alexander; Schulze, Eberhard; Frankenstein, Bernd; Schubert, Lars | Konferenzbeitrag |
| 2016 | Design and materials of antiferroelectric capacitors for high density power electronic applications
Engel, Guenther F. | Konferenzbeitrag |
| 2016 | Detailed study of heat generation in porous LiCoO2 electrodes
Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | Determination of local resistivity in ceramic composites by electron microscopy
Sempf, Kerstin; Boese, Markus; Gnauck, Peter; Höhn, Sören; Herrmann, Mathias | Zeitschriftenaufsatz |
| 2016 | Development and characterization of a miniaturized flame ionization detector in ceramic multilayer technology for field applications
Lenz, Christian; Neubert, Holger; Ziesche, Steffen; Förster, Jan; Koch, Christian; Kuipers, Winfred; Deilmann, Michael; Jurkow, Dominik | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2016 | Development of a SOFC/battery-hybrid system for distributed power generation in India
Pfeifer, Thomas; Hartmann, Mathias; Barthel, Markus; Baade, Jens; Näke, Ralf; Dosch, Christian | Konferenzbeitrag |
| 2016 | Development of photo-curable ceramic suspensions usable for additive manufacturing combined with freeze foaming
Schwarzer, Eric; Ahlhelm, Matthias; Scheithauer, Uwe; Moritz, Tassilo; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | Dickschicht-Messwiderstände mit minimiertem Temperaturkoeffizienten für Präzisionssensoren zur Bestimmung der Einspeiseleistung dezentraler Energieerzeuger
Feller, Claudia; Seuthe, Thomas; Eberstein, Markus | Zeitschriftenaufsatz |
| 2016 | The dissolution mechanism of tungsten carbide under ECM conditions
Schneider, Michael; Schubert, Nora; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | ECM of an SiC-based ceramic - passivation and dissolution
Schneider, Michael; Junker, Nils; Schrötke, Elena; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | The effect of composition on the optical properties and hardness of transparent Al-rich MgO·nAl2O3 spinel ceramics
Wätzig, Katja; Krell, Andreas | Zeitschriftenaufsatz |
| 2016 | Effect of internal current flow during the sintering of zirconium diboride by field assisted sintering technology
Gonzales-Julian, Jesus; Jähnert, Kevin; Speer, Kerstin; Liu, Limeng; Räthel, Jan; Knapp, Michael; Ehrenberg, Helmut; Bram, Martin; Guillon, Oliver | Zeitschriftenaufsatz |
| 2016 | Effect of surface modifications on the bond strength of zirconia ceramic with resin cement resin
Hallmann, Lubica; Ulmer, Peter; Lehmann, Frank; Wille, Sebastian; Polonskyi, Oleksander; Johannes, Martina; Köbel, Stefan; Trottenberg, Thomas; Bornholdt, Sven; Haase, Fabian; Kersten, Holger; Kern, Matthias | Zeitschriftenaufsatz |
| 2016 | Energy-Filtered Backscattered Imaging Using Low-Voltage Scanning Electron Microscopy: Characterizing Blends of ZnPc-C60 for Organic Solar Cells
Cid, Aranzazu Garitagoitia; Sedighi, Mona; Löffler, Markus; Dorp, Willem F. van; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2016 | Entwicklung einer neuen Methode zur Ansteuerung von Ultraschall-Phased Arrays
Gommlich, Andreas
: Meyendorf, Norbert (Betreuer/Gutachter); Gerlach, Gerald (Gutachter); Holstein, Peter (Gutachter); Schubert, Frank (Betreuer) | Dissertation |
| 2016 | Entwicklung einer Pro-aktiven Lötstellengeometrie-unabhängigen Lebensdauersimulation für bleifrei Lote
Metais, Benjamin; Kabakchiev, Alexander; Guyenot, Michael; Metasch, René; Röllig, Mike; Buhl, Patrick; Weihe, Stefan | Konferenzbeitrag |
| 2016 | Entwicklung eines korrosionsbeständigen Diamant-Siliciumcarbid-Werkstoffsystems für die Energietechnik - EKODISC
Blug, B.; Hörner, M.; Walter, M.; Hollstein, T.; Matthey, B.; Herrmann, M.; Kunze, S.; Striegler, M.; Fries, M.; Armgardt, M.; Harig, T.; Höfer, M.; Schäfer, L. | Bericht |
| 2016 | Entwicklung neuartiger thermoelektrischer Module für automotive und industrielle Anwendungen
Niedermeyer, Lars; Augsburg, Klaus; Wodtke, Axel; Rebenklau, Lars; Grießmann, Horst; Gierth, Paul; Irrgang, Klaus; Lippmann, Lutz; Bechtold, Franz | Konferenzbeitrag |
| 2016 | Entwicklung von SiSiC-Strukturkeramiken aus Reaktionsharzbeton
Kunze, Steffen
: Michaelis, Alexander (Gutachter); Hufenbach, Werner A. (Gutachter) | Dissertation |
| 2016 | Entwicklung wirtschaftlich effizienter Hartmetallbeschichtungslösungen für Hochtemperaturanwendungen. Teil 2: Einfluss von Wärmebehandlungen und tribologische Untersuchungen
Berger, Lutz-Michael; Trache, Richard; Toma, Filofteia-Laura; Thiele, Sven; Norpoth, Jonas; Janka, Leo | Zeitschriftenaufsatz |
| 2016 | Equipment, material and processes for UV-DLP-based additive manufacturing of two-component ceramic green bodies and dense structures
Springer, Patrick; Schwarzer, Eric; Refle, Oliver; Richter, Hans-Jürgen | Konferenzbeitrag |
| 2016 | Evaluation of alumina as protective coating for carbon fibers in aluminum-based composites
Krug, Mario; Abidin, Alfaferi Zainal; Höhn, Mandy; Kozera, Rafał; Malczyk, Piotr; Endler, Ingolf; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | Experimental investigations of TiAl-brazes for ceramic joining
Martin, Hans-Peter; Triebert, Anke | Konferenzbeitrag |
| 2016 | An explanation of the microcrack formation in Li1.3Al0.3Ti1.7(PO4)3 ceramics
Wätzig, Katja; Rost, Axel; Langklotz, Ulrike; Matthey, Björn; Schilm, Jochen | Zeitschriftenaufsatz |
| 2016 | Fabrication and characterization of a 20 MHz ultrasonic transducer using soft mold process
Günther, Paul; Gebhardt, Sylvia; Neubert, Holger; Herzog, Thomas; Heuer, Henning; Walter, Susan | Poster |
| 2016 | Fast evaluation of biopsy for prostate cancer diagnosis by Fraunhofer IKTS
Lehmann, Andreas; Opitz, Jörg | Abstract |
| 2016 | FAST/Flash eröffnet neue Perspektiven für die industrielle Anwendung des feldunterstützten Sinterns
Hennicke, Jürgen; Herrmann, Mathias; Kessel, Tobias; Räthel, Jan | Zeitschriftenaufsatz |
| 2016 | FIB sample preparation for X-ray microscopy and ROI target cross-sectioning
Zschech, Ehrenfried; Gluch, Jürgen; Rosenkranz, Rüdiger; Standke, Yvonne; Niese, Sven | Abstract |
| 2016 | First special issue of case study in nondestructive testing and evaluation. Editorial
Köhler, Bernd | Zeitschriftenaufsatz |
| 2016 | Foreword to the special section on "Stress-Induced Phenomena in Microelectronics"
Ho, Paul S.; Zschech, Ehrenfried | Abstract |
| 2016 | Formation of secondary borides in liquid phase-sintered B6O materials
Thiele, Maik; Herrmann, Mathias; Müller, Christin; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | Fraunhofer Institute for Ceramic Technologies and Systems. Annual Report 2015/2016
| Jahresbericht |
| 2016 | Fraunhofer-Institut für Keramische Technologien und Systeme. Jahresbericht 2015/2016
| Jahresbericht |
| 2016 | Full polymer dielectric elastomeric actuators (DEA) functionalised with carbon nanotubes and high-K ceramics
Köckritz, Tilo; Luther, René; Paschew, Georgi; Jansen, Irene; Richter, Andreas; Jost, Oliver; Schönecker, Andreas; Beyer, Eckhard | Zeitschriftenaufsatz |
| 2016 | Functional metal ceramic composites: Application of coating technologies for the composite production
Zelm, Roland; Greiffenberg, Ina; Großmann, Harald J.; Slawik, Tim; Günther, Anne; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | Functionalization and large scale assembly of carbon nanotubes
Majumder, Anindya
: Cuniberti, Gianaurelio (1. Gutachter); Bock, Karlheinz (2. Gutachter); Opitz, Jörg (Betreuer) | Dissertation |
| 2016 | Functionally graded materials made by water-based multilayer technology
Scheithauer, Uwe; Schwarzer, Eric; Slawik, Tim; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | Fundamental limitations at the determination of initial yield stress using nano-indentation with spherical tips
Clausner, André; Richter, Frank | Zeitschriftenaufsatz |
| 2016 | Ga contamination in silicon by focused ion beam milling: Dynamic model simulation and atom probe tomography experiment
Huang, J.; Löffler, M.; Möller, W.; Zschech, Ehrenfried | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2016 | Gefrierschäume - Entwicklung von zellularen Strukturen für vielfältige Anwendungen
Ahlhelm, Matthias
: Michaelis, Alexander (Hrsg.); Heinrich, Jürgen (Betreuer); Moritz, Tassilo (Betreuer) | Dissertation |
| 2016 | Gefügeausbildung und Eigenschaften von nanoskaligen binderfreien Hartmetallen
Pötschke, Johannes
: Michaelis, Alexander (Hrsg.) | Dissertation |
| 2016 | Glass ceramic separators for room temperature operating sodium batteries
Wagner, Dörte; Rost, Axel; Schilm, Jochen; Fritsch, Marco; Kusnezoff, Mihails; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | Grain boundary segregation in sintered materials: Effect on densification and grain growth
Lay, Sabine; Guyon, Audrey; Chaix, Jean-Marc; Carry, Claude; Pötschke, Johannes | Konferenzbeitrag |
| 2016 | Herstellung von dünnen mischleitenden Ba0,5Sr0,5Co0,8Fe02O3-δ-Membranen mit hoher Sauerstoffpermeation auf porösen rohrförmigen Trägern im Cofiring
Pippardt, Ute; Bernhardt, Matthias; Böer, Jürgen; Kiesel, Lutz; Kircheisen, Robert; Kriegel, Ralf; Voigt, Ingolf; Weyd, Marcus | Zeitschriftenaufsatz |
| 2016 | Herstellung, Modifizierung und Charakterisierung von borcarbidbasierten Keramiken als Thermoelektrikum
Feng, Bing
: Michaelis, Alexander (Gutachter); Lippmann, Wolfgang (Gutachter); Kieback, Bernd | Dissertation |
| 2016 | High performance silver polymer pastes for SHJ cells
Körner, Stefan; Waltinger, Andreas; Partsch, Uwe; Eberstein, Markus | Vortrag |
| 2016 | High resolution radio frequency inspection of carbon fiber composites
Heuer, Henning; Schulze, Martin; Pooch, Matthias | Konferenzbeitrag |
| 2016 | Highly efficient and long-term stable micro fuel cell system based on ceramic multilayer technology
Goldberg, Adrian; Röntzsch, Lars; Pohlmann, Carsten; Freytag, Christian; Tagne Saha, Ariel Thierry; Ziesche, Steffen; Partsch, Uwe | Konferenzbeitrag |
| 2016 | Hochtemperatur-Stabilität optikrelevanter Eigenschaften von transparenter MgAl2O4-Spinell-Keramik
Reichel, Uwe; Notni, Gunther; Duparré, Angela; Müller, F.A.; König, Stefan; Herold, Volker | Aufsatz in Buch |
| 2016 | HOT-300 - a multidisciplinary technology approach targeting microelectronic systems at 300 °C operating temperature
Vogt, Holger; Altmann, Frank; Braun, Sebastian; Celik, Yusuf; Dietrich, Lothar; Dietz, Dorothee; Dijk, Marius van; Dreiner, Stefan; Döring, Ralf; Gabler, Felix; Goehlich, Andreas; Hutter, Matthias; Ihle, Martin; Kappert, Holger; Kordas, Norbert; Kokozinski, Rainer; Naumann, Falk; Nowak, Torsten; Oppermann, Hermann; Partsch, Uwe; Petzold, Matthias; Roscher, Frank; Rzepka, Sven; Schubert, Ralph; Weber, Constanze; Wiemer, Maik; Wittler, Olaf; Ziesche, Steffen | Konferenzbeitrag |
| 2016 | A hybrid phenomenological model for ferroelectroelastic ceramics. Part I: Single phased materials
Stark, Sebastian; Neumeister, Peter; Balke, Herbert | Zeitschriftenaufsatz |
| 2016 | A hybrid phenomenological model for ferroelectroelastic ceramics. Part II: Morphotropic PZT ceramics
Stark, Sebastian; Neumeister, Peter; Balke, Herbert | Zeitschriftenaufsatz |
| 2016 | Improvement of interface between electrolyte and electrodes in solid oxide electrolysis cell
Trofimenko, Nikolai; Kusnezoff, Mihails; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | In-operando Temperaturmessung bei der plasmaelektrolytischen Oxidation von Aluminium
Voigt, Karsten; Lämmel, Christoph; Schneider, Michael | Konferenzbeitrag |
| 2016 | Influence of electrode design and contacting layers on performance of electrolyte supported SOFC/SOEC single cells
Kusnezoff, Mihails; Trofimenko, Nikolai; Müller, Martin; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | Influence of heat treatment on the abrasive wear resistance of a Cr3C2-NiCr coating deposited by an ethene-fuelled HVOF spray process
Janka, Leo; Norpoth, Jonas; Trache, Richard; Berger, Lutz-Michael | Zeitschriftenaufsatz |
| 2016 | Influence of PAN-fiber stretching during thermal treatment on the stabilization reactions
Meinl, Juliane; Kirsten, Martin; Cherif, Chokri; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | Influence of the polarization anisotropy on the electrocaloric effect in epitaxial PMN-PT thin films
Mietschke, Michael; Chekhonin, Paul; Molin, Christian; Gebhardt, Sylvia; Fähler, Sebastian; Nielsch, Kornelius; Schultz, Linda; Hühne, Ruben | Zeitschriftenaufsatz |
| 2016 | The influence of the synthesis route on electrochemical properties of spinel type high-voltage cathode material LiNi0.5Mn1.5O4 for lithium ion batteries
Seidel, Matthias; Nikolowski, Kristian; Wolter, Mareike; Kinski, Isabel; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | Innovative and novel manufacturing methods of ceramics and metal-ceramic composites for biomedical applications
Ahlhelm, Matthias; Günther, Paul; Scheithauer, Uwe; Schwarzer, Eric; Günther, Anne; Slawik, Tim; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | Integration of high-frequency M-type hexagonal ferrite inductors in LTCC multilayer modules
Bierlich, Silvia; Reimann, Timmy; Barth, Stefan; Capraro, Beate; Bartsch, Heike; Müller, Jens; Töpfer, Jörg | Zeitschriftenaufsatz |
| 2016 | Integrative evaluation of automated massage combined with thermotherapy: physical, physiological, and psychological viewpoints
Kim, Dowon; Lee, Daewoon; Schreiber, Jürgen; Im, Changhwan; Kim, Hansung | Zeitschriftenaufsatz |
| 2016 | An interlaboratory comparison of nanosilver characterisation and hazard identification: Harmonising techniques for high quality data
Jemec, Anita; Kahru, Anne; Potthoff, Annegret; Drobne, Damjana; Heinlaan, Margit; Böhme, Steffi; Geppert, Mark; Novak, Sara; Schirmer, Kristin; Rekulapally, Rohit; Singh, Shashi; Aruoja, Villem; Sihtmäe, Mariliis; Juganson, Katre; Käkinen, Aleksandr; Kühnel, Dana | Zeitschriftenaufsatz |
| 2016 | Joining of ceramic Ba0.5Sr0.5Co0.8Fe0.2O3 membranes for oxygen production to high temperature alloys
Kiebach, Ragnar; Engelbrecht, Kurt L.; Kwok, Kawai; Molin, Sebastian M.; Søgaard, Martin; Niehoff, Patrick; Schulze-Küppers, Falk; Kriegel, Ralf; Kluge, Jens; Hendriksen, Peter Vang | Zeitschriftenaufsatz |
| 2016 | Joining technologies for a temperature-stable integration of a LTCC-based pressure sensor
Schilm, Jochen; Goldberg, Adrian; Partsch, Uwe; Dürfeld, Wolfgang; Arndt, Dietmar; Pönicke, Andreas; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | Keramik für Filtrationsanwendungen
Adler, Jörg; Kriegel, Ralf; Petasch, Uwe; Richter, Hannes; Voigt, Ingolf; Weyd, Marcus | Zeitschriftenaufsatz |
| 2016 | Kohlenstroffmembran, Verfahren zur Herstellung von Kohlenstoffmenbranen und deren Verwendung
Richter, Hannes; Kämnitz, Susanne; Voigt, Ingolf; Grützner, Jörg; Martin, Dirk | Patent |
| 2016 | Konform temperierter Fluidmischer
Pohl, Markus; Gradmann, Rena; Scheithauer, Uwe; Eberstein, Markus | Poster |
| 2016 | Laser Speckle Photometry (LSP) - optical sensor system for monitoring of material condition and processing
Cikalova, Ulana; Bendjus, Beatrice; Sudip, Shohag Roy; Chen, Lili | Konferenzbeitrag |
| 2016 | Laser-akustische Messtechnik in der Materialcharakterisierung
Windisch, Thomas
: Meyendorf, Norbert (Gutachter / Betreuer); Gerlach, Gerald (Gutacher); Burgholzer, Peter (Gutacher) | Dissertation |
| 2016 | Long-term compositional/microstructural development of Cr3C2-NiCr coatings at 500 °C, 700 °C and 900 °C
Matthews, Steven; Berger, Lutz-Michael | Zeitschriftenaufsatz |
| 2016 | Low cost, ceramic battery components and cell design
Weidl, Roland; Schulz, Matthias; Hofacker, Martin; Dohndorf, Heidi; Stelter, M. | Konferenzbeitrag |
| 2016 | LTCC - packaging of a laser optical system for harsh environments
Ihle, Martin; Ziesche, Steffen; Beckert, Erik; Hornaff, Marcel | Konferenzbeitrag |
| 2016 | Manufacturing and properties of polycrystalline WC-Co based cemented carbides
Pötschke, Johannes; Richter, Volkmar; Mayer, Markus | Konferenzbeitrag |
| 2016 | Material and ingenious synthesis strategy for short-wavelength infrared light-emitting device
Fu, Jipeng; Zhang, Su; Pang, Ran; Jia, Yonglei; Sun, Wenzhi; Li, Haifeng; Jiang, Lihong; Li, Chengyu | Zeitschriftenaufsatz |
| 2016 | Materialdiagnose und integrale Prüfverfahren für keramische Bauteile
Opitz, Jörg; Wunderlich, Christian; Bendjus, Beatrice; Cikalova, Ulana; Wolf, Christian; Naumann, Sascha; Lehmann, Andreas; Barth, Martin; Duckhorn, Frank; Köhler, Bernd; Tschöke, Kilian; Tschöpe, Constanze; Moritz, Tassilo; Scheithauer, Uwe; Windisch, Thomas | Zeitschriftenaufsatz |
| 2016 | Materials and technologies to enable high temperature stable MEMS and electronics for smart systems used in harsh environments
Gabler, Felix; Roscher, Frank; Döring, Ralf; Otto, Alexander; Ziesche, Steffen; Ihle, Martin; Celik, Yusuf; Dietz, Dorothee; Goehlich, Andreas; Kappert, Holger; Vogt, Holger; Naumann, Falk; Geßner, Thomas | Konferenzbeitrag |
| 2016 | Mechanical characterization of porous nano-thin films by use of atomic force acoustic microscopy
Kopycinska-Müller, Malgorzata; Clausner, André; Yeap, Kong Boon Oon; Köhler, Bernd; Kuzeyeva, Nataliya; Mahajan, Sukesh; Savage, Travis; Zschech, Ehrenfried; Wolter, Klaus-Jürgen | Zeitschriftenaufsatz |
| 2016 | Mechanism of gas separation through amorphous silicon oxycarbide membranes
Prasad, Ravi Mohan; Jüttke, Yvonne; Richter, Hannes; Voigt, Ingolf; Riedel, Ralf; Gurlo, Aleksander | Zeitschriftenaufsatz |
| 2016 | Medizinische Komponenten und Design-Artikel aus Keramik - hergestellt mit additiver Fertigungstechnik
Moritz, Tassilo; Scheithauer, Uwe; Schwarzer, Eric; Ahlhelm, Matthias | Zeitschriftenaufsatz |
| 2016 | Melatonin suppresses autophagy induced by clinostat in preosteoblast MC3T3-E1 cells
Yoo, Yeong-Min; Han, Tae-Young; Kim, Han Sung | Zeitschriftenaufsatz |
| 2016 | Melatonin-mediated intracellular insulin during 2-deoxy-D-glucose treatment is reduced through autophagy and EDC3 protein in insulinoma INS-1E cells
Kim, Han Sung; Han, Tae-Young; Yoo, Yeong-Min | Zeitschriftenaufsatz |
| 2016 | Membrane electrolysis - a promising technology for mine water treatment, radionuclide separation, and extraction of valuable metals
Friedrich, H.J. | Konferenzbeitrag |
| 2016 | Messverfahren zur thermo-mechanischen Charakterisierung von Werkstoffen der Hochtemperatur-AVT
Metasch, René; Klemm, Alexander; Röllig, Mike; Zerna, Thomas | Konferenzbeitrag |
| 2016 | A method for analysing the die filling behaviour of ceramic granules
Glöß, Bianca; Fries, Manfred | Zeitschriftenaufsatz |
| 2016 | Micro-Reactors made by lithography-based ceramic manufacturing (LCM)
Scheithauer, Uwe; Schwarzer, Eric; Ganzer, Gregor; Körnig, André; Beckert, Wieland; Reichelt, Erik; Jahn, Matthias; Härtel, Anja; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | A model for statistical electromigration simulation with dependence on capping layer and Cu microstructure in two dimensions
Kraatz, Matthias; Gall, Martin; Zschech, Ehrenfried; Schmeißer, Dieter; Ho, Paul S. | Zeitschriftenaufsatz |
| 2016 | Modified differential scanning calorimeter for direct electrocaloric measurements
Sanlialp, Mehmet; Molin, Christian; Shvartsman, Vladimir V.; Gebhardt, Sylvia; Lupascu, Doru Constantin | Zeitschriftenaufsatz |
| 2016 | Monolithischer statischer Mischer und/oder katalytisch wirkendes Element sowie Verfahren zur Herstellung
Scheithauer, Uwe; Reichelt, Erik; Beckert, Wieland; Schwarzer, Eric; Pohl, Markus | Patent |
| 2016 | Multi-material approach to integrate ceramic boxed temperature-sensitive components in laser beam melted structures for bio and other applications
Lausch, Holger; Töppel, Thomas; Petters, Romy; Gronde, Bernd; Herrmann, Mathias; Funke, Kerstin | Konferenzbeitrag |
| 2016 | Multi-scale radiographic applications in microelectronic industry
Gluch, Jürgen; Löffler, Markus; Meyendorf, Norbert G.; Oppermann, Martin; Röllig, Mike; Sättler, P.; Wolter, Klaus-Jürgen; Zschech, Ehrenfried | Konferenzbeitrag |
| 2016 | Nanomaterial-modified flexible micro-electrode array by electrophoretic deposition of carbon nanotubes
Winkin, Nadine; Gierth, Uta; Mokwa, Wilfried; Schneider, Michael | Zeitschriftenaufsatz |
| 2016 | Nanomonitoring of ceramic surface
Lapina, V.A.; Pershukevich, P.P.; Pavich, T.A.; Bushuk, S.B.; Opitz, Jörg | Konferenzbeitrag |
| 2016 | NDE applications in microelectronic industries
Meyendorf, Norbert; Oppermann, Martin; Krüger, Peter; Röllig, Mike; Wolter, Klaus-Jürgen | Konferenzbeitrag |
| 2016 | New lightweight kiln furniture - Production processes and properties
Scheithauer, Uwe; Slawik, Tim; Schwarzer, Eric; Tscharntke, Franziska; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | Non-covalent modified multi-walled carbon nanotubes: Dispersion capabilities and interactions with bacteria
Khazaee, Maryam; Majumder, Anindya; Baraban, Larysa; Cuniberti, Gianaurelio; Opitz, Jörg; Ye, Dan | Zeitschriftenaufsatz |
| 2016 | Non-destructive imaging of organosilicate glass (OSG) thin films at low voltage with the EsB detector
Garitagoitia, Maria Aranzazu; Moayedi, Elham; Rosenkranz, Rüdiger; Clausner, André; Pakbaz, Khashayar; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2016 | Nondestructive cell evaluation techniques in SOFC stack manufacturing
Wunderlich, Christian | Konferenzbeitrag |
| 2016 | Novel approaches to determine thermomechanical materials data in advanced interconnect stacks
Zschech, Ehrenfried; Gall, Martin; Clausner, André; Sander, Christoph; Sukharev, Valeriy | Konferenzbeitrag |
| 2016 | A novel dichromic self-referencing optical probe SrO:Bi(3+),Eu(3+) for temperature spatially and temporally imaging
Fu, Jipeng; Pang, Ran; Jiang, Lihong; Jia, Yonglei; Sun, Wenzhi; Zhang, Su; Li, Chengyu | Zeitschriftenaufsatz |
| 2016 | A novel piezoelectric fibre patch transducer for shear horizontal wave modes
Köhler, Bernd; Gaul, Tobias; Schubert, Frank; Lieske, Uwe | Konferenzbeitrag |
| 2016 | Novel polycrystalline WC-Co based cemented carbides and their properties
Pötschke, Johannes; Richter, Volkmar; Mayer, Markus | Konferenzbeitrag |
| 2016 | Offshore foundation monitoring by guided waves - challenges and perspectives
Weihnacht, Bianca; Frankenstein, Bernd; Gaul, Tobias; Neubeck, Robert; Schubert, Lars | Konferenzbeitrag |
| 2016 | On determination of focal laws for linear phased array probes as to the active and passive element size
Gommlich, Andreas; Schubert, Frank | Konferenzbeitrag |
| 2016 | On the strength and failure of an electrolyte supported solid oxide fuel cell
Fleischhauer, Felix
: Danzer, Robert (Betreuer); Michaelis, Alexander (Gutachter) | Dissertation |
| 2016 | Optical electron beam dosimetry with ceramic phosphors as passive sensor material for broad dose ranges
Reitzig, Manuela; Goodband, Rachel; Schuster, Christiane; Härtling, Thomas | Zeitschriftenaufsatz |
| 2016 | Optimisation methods for the determination of cyclic material parameters from strain controlled uniaxial fatigue tests
Fuhrmann, Katrin; Neumeister, Peter; Eulitz, Klaus-Georg | Zeitschriftenaufsatz |
| 2016 | Optimization of the SEM working conditions: EsB detector at low voltage
Cid, Aranzazu Garitagoitia; Rosenkranz, Rüdiger; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2016 | Oxidized carbo-iron causes reduced reproduction and lower tolerance of juveniles in the amphipod Hyalella azteca
Weil, Mirco; Meißner, Tobias; Springer, Armin; Bundschuh, Mirco; Hübler, Lydia; Schulz, Ralf; Duis, Karen | Zeitschriftenaufsatz |
| 2016 | Platinum electrodeposition from a dinitrosulfatoplatinate(II) electrolyte
Weiser, Mathias; Schulze, Claudia; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | PMN-8PT device structures for electrocaloric cooling applications
Molin, Christian; Gebhardt, Sylvia | Konferenzbeitrag, Zeitschriftenaufsatz |
| 2016 | Pollen structure visualization using high-resolution laboratory-based hard X-ray tomography
Li, Qiong; Gluch, Jürgen; Krüger, Peter; Gall, Martin; Neinhuis, Christoph; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2016 | Potential improvements of the presently applied in-service inspection of wheelset axles
Kappes, Wolfgang; Hentschel, Dieter; Oelschlägel, Thomas | Zeitschriftenaufsatz |
| 2016 | Preface. Advances in solid oxide fuel cells and electronic ceramics
Bansal, Narottam P.; Kusnezoff, Mihails; Shimamura, Kiyoshi | Konferenzbeitrag |
| 2016 | Processing of thermoplastic suspensions for additive manufacturing of ceramic- and metal-ceramic-composites by thermoplastic 3D-printing (T3DP)
Scheithauer, Uwe; Schwarzer, Eric; Härtel, Anja; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | Properties of retinal precursor cells grown on vertically aligned multiwalled carbon nanotubes generated for the modification of retinal implant-embedded microelectrode arrays
Johnen, Sandra; Meißner, Frank; Krug, Mario; Baltz, Thomas; Endler, Ingolf; Mokwa, Wilfried; Walter, Peter M. | Zeitschriftenaufsatz |
| 2016 | Quantifying voids effecting delamination in carbon/epoxy composites: static and fatigue fracture behavior
Hakim, I.; May, D.; Ras, M.; Meyendorf, Norbert; Donaldson, Steven L. | Konferenzbeitrag |
| 2016 | Robust and reliable encapsulation of electronics for underwater applications
Schwerz, Robert; Röllig, Mike; Frankenstein, Bernd | Konferenzbeitrag |
| 2016 | A ruthenium racemisation catalyst for the synthesis of primary amines from secondary amines
Pingen, Dennis; Altıntaş, Çiğdem; Schaller, Max Rudolf; Vogt, Dieter | Zeitschriftenaufsatz |
| 2016 | Schichten aus Kohlenstoff-Nanomaterialien auf asymmetrisch porösen, keramischen Trägern und deren Erprobung für Anwendungen in Membrantechnik und Katalyse
Simon, Adrian
: Ritter, Uwe (Betreuer); Rädlen, Edda (Gutachter); Voigt, Ingolf (Gutachter) | Dissertation |
| 2016 | Semi-automated inspection unit for ceramics
Wolf, Christian; Lehmann, Andreas; Unglaube, Gregor | Konferenzbeitrag |
| 2016 | Shear horizontal piezoelectric fiber patch transducers (SH-PFP) for guided elastic wave applications
Köhler, Bernd; Gaul, Tobias; Lieske, Uwe; Schubert, Frank | Zeitschriftenaufsatz |
| 2016 | Shear horizontal ultrasonic waves excited by piezoelectric fiber patches
Köhler, Bernd; Gaul, Tobias; Lieske, Uwe; Schubert, Frank | Konferenzbeitrag |
| 2016 | Sliding and abrasive wear behaviour of HVOF- and HVAF-sprayed Cr3C2-NiCr hardmetal coatings
Bolelli, Giovanni; Berger, Lutz-Michael; Börner, Tim; Koivuluoto, Heli; Matikainen, V.; Lusvarghi, Luca; Lyphout, Christophe; Markocsan, Nicolaie; Nylén, Per E.; Sassatelli, Paolo; Trache, Richard; Vuoristo, Petri | Zeitschriftenaufsatz |
| 2016 | SoC dependent kinetic parameters of insertion electrodes from StairCase - GITT
Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | Sodiation vs. Lithiation of FePO4: A comparative kinetic study
Heubner, Christian; Heiden, Sebastian; Matthey, Björn; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | SOFC system development and held trials for commercial applications
Pfeifer, Thomas; Reuber, Sebastian; Hartmann, Mathias; Barthel, Markus; Baade, Jens | Konferenzbeitrag |
| 2016 | Some aspects of macroscopic phenomenological material models for ferroelectroelastic ceramics
Stark, Sebastian; Neumeister, Peter; Balke, Herbert | Zeitschriftenaufsatz |
| 2016 | Spark plasma sintering novel tooling design: Temperature uniformization during consolidation of silicon nitride powder
Giuntini, Diletta; Räthel, Jan; Herrmann, Mathias; Michaelis, Alexander; Haines, Christopher D.; Olevsky, Eugene Al | Zeitschriftenaufsatz |
| 2016 | Sprödbruchrisiko an keramischen Bauelementen in Abhängigkeit vom Hochtemperatur-Lotwerkstoff und der Beanspruchungsgeschwindigkeit
Dudek, Rainer; Hildebrandt, Marcus; Rzepka, Sven; Röllig, Mike; Trodler, Jörg | Konferenzbeitrag |
| 2016 | Status of SOFC/SOEC stack and system development and commercialization activities at Fraunhofer IKTS
Kusnezoff, Mihails; Megel, Stefan; Jahn, Matthias; Pfeifer, Thomas; Baade, Jens | Konferenzbeitrag |
| 2016 | A SThM probe optimization and its time-space multi-scale modeling
Lenczner, Michel; Yang, Bin; Bontempi, Alexia; Teyssieux, Damien; Cogan, Scott D.; Janus, Pawel; Köhler, Bernd; Ratier, Nicolas E. | Zeitschriftenaufsatz |
| 2016 | Structural and ferroelectric properties of 0.9PMN-0.1PT thin films
Mietschke, Michael; Engelhardt, Stefan; Fähler, Sebastian; Molin, Christian; Gebhardt, Sylvia; Schultz, Ludwig; Hühne, Ruben | Konferenzbeitrag |
| 2016 | Structural and ferroelectric properties of epitaxial BaZrxTi1-xO3 thin films
Engelhardt, Stefan; Mietschke, Michael; Molin, Christian; Gebhardt, Sylvia; Fähler, Sebastian; Nielsch, Kornelius; Hühne, Ruben | Zeitschriftenaufsatz |
| 2016 | Structural characterisation of carbon fibres along the fabrication process using SEM/FIB and TEM
Mühle, Uwe; Standke, Yvonne; Zschech, Ehrenfried; Meinl, Juliane; Michaelis, Alexander; Kirsten, Martin; Cherif, Chokri | Konferenzbeitrag |
| 2016 | Study of mechanical behavior of AFM silicon tips under mechanical load
Kopycinska-Müller, Malgorzata; Gluch, Jürgen; Köhler, Bernd | Zeitschriftenaufsatz |
| 2016 | Symposium Anodisieren - Oxidschichten von hart bis smart 2016
: Michaelis, Alexander; Schneider, Michael | Tagungsband |
| 2016 | Synthesis of plasmonic Cu2-xSe@ZnS Core@Shell nanoparticles
Wolf, Andreas; Härtling, Thomas; Hinrichs, Dominik; Dorfs, Dirk | Zeitschriftenaufsatz |
| 2016 | Systementwicklung zur Strukturüberwachung mit geführten Wellen
Schubert, Lars; Weihnacht, Bianca; Lieske, Uwe; Frankenstein, Bernd; Gebhardt, Sylvia; Neumeister, Peter; Neubert, Holger | Konferenzbeitrag |
| 2016 | Tailored composite transducers based on piezoceramic fibres and pearls
Hohlfeld, Kai; Neumeister, Peter; Michaelis, Alexander; Gebhardt, Sylvia | Konferenzbeitrag |
| 2016 | Technologien zur zuverlässigen und effizienten Prüfung von Unterwasser-Tragstrukturen an Offshore-Windenergieanlagen
Weihnacht, Bianca | Bericht |
| 2016 | Technology readiness of SOFC stacks technology - A review
Wunderlich, Christian | Konferenzbeitrag |
| 2016 | TEM investigation of barrier-like anodic oxide films on aluminum
Schneider, Michael; Lämmel, Christoph; Hübner, Ralf; Gierth, Uta; Michaelis, Alexander | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2016 | TEM investigation of time-dependent dielectric breakdown mechanisms in Cu/Low-k interconnects
Liao, Zhongquan; Gall, Martin; Yeap, Kong Boon; Sander, Christoph; Clausner, André; Mühle, Uwe; Gluch, Jürgen; Standke, Yvonne; Rosenkranz, Rüdiger; Aubel, Oliver; Hauschildt, Meike; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2016 | Temperature control of an SThM micro-probe with an heat source estimator and a lock-in measurement
Lenczner, Michel; Yang, Bin; Cogan, Scott D.; Domas, Stêphane; Ke, D.; Couturier, Raphaël; Renault, D.; Köhler, Bernd; Janus, Pawel | Konferenzbeitrag |
| 2016 | Theoretische und experimentelle Untersuchungen zu Stofftransport und Druckverlust in geschütteten und strukturierten Festbetten
Reichelt, Erik
: Lange, Rüdiger (Gutachter); Landmesser, Holger (Gutachter); Michaelis, Alexander (Ed.) | Dissertation |
| 2016 | Thermisch-elektrochemische in-operando Untersuchungen zur lokalen Wärmeentwicklung in Lithiumionenbatteriezellen
Heubner, Christian
: Michaelis, Alexander | Dissertation |
| 2016 | Thermische Analysen und Bestimmungen thermophysikalischer Eigenschaften von Materialien und Bauteilen
Gestrich, Tim | Konferenzbeitrag |
| 2016 | Three dimensional image-based simulation of ultrasonic wave propagation in polycrystalline metal using phase-field modeling
Nakahataa, K.; Sugahara, H.; Barth, Martin; Köhler, Bernd; Schubert, Frank | Zeitschriftenaufsatz |
| 2016 | TiOx-based thermoelectric modules: Manufacturing, properties, and operational behavior
Martin, Hans-Peter; Pönicke, Andreas; Kluge, Martin; Sichert, Ina; Rost, Axel; Conze, Susan; Wätzig, Katja; Schilm, Jochen; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | TiSiCN nanocomposite hard coatings by CVD
Höhn, Mandy; Endler, Ingolf; Matthey, Björn | Konferenzbeitrag |
| 2016 | Tool technologies for milling of hardmetals and ceramics
Bergs, Thomas; Richter, Volkmar; Ottersbach, Michael; Pötschke, Johannes; Hochmuth, Carsten; Busch, Katja | Konferenzbeitrag |
| 2016 | Towards fabrication of high frequency ultrasonic transducers using soft mold process
Gebhardt, Sylvia; Günther, Paul; Neubert, Holger; Fröhlich, Selina; Walter, Susan; Herzog, Thomas; Heuer, Henning | Konferenzbeitrag |
| 2016 | Transparent alumina ceramics densified by a combinational approach of spark plasma sintering and hot isostatic pressing
Trunec, Martin; Klimke, Jens; Shen, Zhijian-James | Zeitschriftenaufsatz |
| 2016 | Transparent ceramics at 50: Progress made and further prospects
Goldstein, Adrian; Krell, Andreas | Zeitschriftenaufsatz |
| 2016 | Transparent front side contact pastes for high efficiency SHJ-solar cells
Körner, Stefan; Waltinger, Andreas; Eberstein, Markus | Vortrag |
| 2016 | Transparent MgAl2O4/LiF ceramics by hot-pressing: Host-additive interaction mechanisms issue revisited
Goldstein, Adrian; Räthel, Jan; Katz, Michael; Berlin, Mila; Galun, Ehud | Zeitschriftenaufsatz |
| 2016 | Transportables Messgerät zum Prüfen einer Probe mittels Ultraschall
Schiller-Bechert, David Maximilian; Macher, Frank | Patent |
| 2016 | Untersuchung wärmebedingter Beeinträchtigungen der Schichteigenschaften beim Hartanodisieren
Lämmel, Christoph; Schneider, Michael; Heubner, Christian; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | Untersuchungen zu mikroskopischen und makroskopischen Grünkörperfehlern bei der uniaxialen Pressverdichtung
Svoboda, Hermann
: Michaelis, Alexander (1. Gutachter); Falk, Guido (2. Gutachter); Fries, Manfred (Betreuer) | Dissertation |
| 2016 | Using a Newman-based battery model and post mortem analysis to develop a non-destructive method for SoH estimation
Schledde, D.; Leiva, D.; Schwalm, M.; Puchta, M.; Nikolowski, K.; Wolter, M. | Poster |
| 2016 | Validation of an ultrasonic-phased array method for testing of circumferential welds at thin-walled pipes
Hillmann, Susanne; Schubert, Frank; Brosius, David Maximilian; Bor, Zsolt | Zeitschriftenaufsatz |
| 2016 | Validation of an ultrasonic-phased-array-method for testing of circumferential welds at thin-walled pipes
Hillmann, Susanne; Schubert, Frank; Schiller-Bechert, David-Maximilian; Bor, Zsolt | Konferenzbeitrag |
| 2016 | Verfahren und Anordnung zur Erzeugung und thermischen Kompression von Sauerstoff
Kriegel, Ralf; Kircheisen, Robert; Sonnenberg, Claudia; Schulz, Matthias | Patent |
| 2016 | Verfahren und System zum Bestimmen einer mechanischen Verformung und/oder eines Defekts eines Probekörpers
Schulze, Martin; Heuer, Henning | Patent |
| 2016 | Verfahren zur Detektion von Fehlern oder Defekten an Bauteilen unter Einsatz von Ultraschallwandlern
Joneit, Dieter; Walter, Susan | Patent |
| 2016 | Verfahren zur Herstellung dichter Bauteile aus Zirkoncarbid und mit dem Verfahren hergestellte Bauteile
Schönfeld, Katrin; Martin, Hans-Peter | Patent |
| 2016 | Verfahren zur Herstellung eines Silber enthaltenden Glaspulvers sowie die Verwendung des Glaspulvers
Körner, Stefan; Eberstein, Markus | Patent |
| 2016 | Verfahren zur Herstellung und Überprüfung von Werkstücken und Werkstück
Härtling, Thomas; Schuster, Christiane | Patent |
| 2016 | Werkstoff bei dem in eine Siliciumnitrid-Matrix-Diamant- oder cBN-Partikel als Hartstoff eingebettet sind, und Verfahren zu seiner Herstellung
Zschippang, Eveline; Wolfrum, Anne-Kathrin; Herrmann, Mathias | Patent |
| 2016 | Zuverlässigkeitsuntersuchungen an organischen Leiterplatten mit dickem Kupferkern für leistungselektronische Anwendungen
Meier, Karsten; Röllig, Mike; Bock, Karlheinz | Konferenzbeitrag |