| | |
|---|
| 2021 | 3D relative dose measurement with a µm thin dosimetric layer
Schuster, Christiane; Kuntz, Florent; Strasser, Alain; Härtling, Thomas; Dornich, Kay; Richter, Daniel | Zeitschriftenaufsatz |
| 2021 | Anwendung eines technischen Platinelektrolyten für die katalytisch aktive Nanopartikel- und Metallschichtabscheidung
Weiser, Mathias
: Michaelis, Alexander | Dissertation |
| 2021 | Biaxial flexural strength of zirconia: A round robin test with 12 laboratories
Spintzyk, Sebastian; Geis-Gerstorfer, Jürgen; Bourauel, Christoph; Keilig, Ludger; Lohbauer, Ulrich; Brune, Annike; Greuling, Andreas; Arnold, Christin; Rues, Stefan; Adjiski, Ranko; Sawada, Tomofumi; Lümkemann, Nina; Stawarczyk, Bogna; Ilie, Nicoleta; Frankenberger, Roland; Dudek, Marie-Christine; Strickstrock, Monika; Begand, Sabine | Zeitschriftenaufsatz |
| 2021 | Determination of the filler distribution in an epoxy molding compound using high-resolution X-ray computed tomography
Topal, Emre; Gluch, Jürgen; Clausner, André; Cardoso, Andre; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2021 | Estimation of the Filling Distribution and Height Levels Inside an Insulated Pressure Vessel by Guided Elastic Wave Attenuation Tomography
Neubeck, Robert; Stephan, Mareike; Gaul, Tobias; Weihnacht, Bianca; Schubert, Lars; Bindingsbø, Arne Ulrik; Østvik, Jan-Magnus | Zeitschriftenaufsatz |
| 2021 | Evaluation of indium tin oxide for gas sensing applications: Adsorption/desorption and electrical conductivity studies on powders and thick films
Dietrich, Stefan; Kusnezoff, Mihails; Petasch, Uwe; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2021 | Facile deposition of multiwalled carbon nanotubes via electrophoretic deposition in an environmentally friendly suspension
Schneider, Michael; Weiser, Mathias; Ferl, Sandra; Krasmann, Christian; Potthoff, Annegret; Voigt, Karsten; Malcher, Peter | Zeitschriftenaufsatz |
| 2021 | Formation Mechanism of Electrodeposited Sb/Sb2O3 Micro-Composites
Voigt, Karsten; Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2021 | Functionalized silicon substrates with stripe-patterned surface-near electrostatic forces for the self-organized, stable immobilization of biomolecules
Blaschke, Daniel; Pahlow, Susanne; Fremberg, Tino; Weber, Karina; Müller, Anne Dorothea; Kurz, Susanne; Spohn, Juliane; Dhandapani, Vignesh; Rebohle, Lars; Skorupa, Ilona; Schmidt, Heidemarie | Zeitschriftenaufsatz |
| 2021 | How does grazing incidence ultrasonic microscopy work? A study based on grain-scale numerical simulations
Kalkowski, Michal; Lowe, Michael J.S.; Barth, Martin; Rjelka, Marek; Köhler, Bernd | Zeitschriftenaufsatz |
| 2021 | Hydrophobic ceramic membranes in MD processes - Impact of material selection and layer characteristics
Schnittger, Johann; McCutcheon, Jeffrey R.; Hoyer, Thomas; Weyd, Marcus; Fischer, Gundula; Puhlfürß, Petra; Halisch, Matthias; Voigt, Ingolf; Lerch, André | Zeitschriftenaufsatz |
| 2021 | In-plane heatwave thermography as digital inspection technique for fasteners in aircraft fuselage panels
Stamm, Michael; Krüger, Peter; Pfeiffer, Helge; Köhler, Bernd; Reynaert, Johan; Wevers, Martine | Zeitschriftenaufsatz |
| 2021 | Industrial application of ceramic nanofiltration membranes for water treatment in oil sands mines
Motta Cabrera, Sandra; Winnubst, Louis; Richter, Hannes; Voigt, Ingolf; Nijmeijer, Arian | Zeitschriftenaufsatz |
| 2021 | Influence of Simultaneous Cr2O3 and TiO2 Additions on the Microstructure and Properties of APS Alumina Coatings
Conze, Susan; Grimm, Maximilian; Berger, Lutz-Michael; Thiele, Sven; Drehmann, Rico; Lampke, Thomas | Zeitschriftenaufsatz |
| 2021 | Microstructure and fracture mechanism investigation of porous silicon nitride-zirconia-graphene composite using multi-scale and in-situ microscopy
Liao, Zhongquan; Standke, Yvonne; Gluch, Jürgen; Balazsi, Katalin; Pathak, Onkar; Höhn, Sören; Herrmann, Mathias; Werner, Stephan; Dusza, Jan; Balazsi, Csaba; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2021 | Ni-Cu-Zn ferrites with high Curie temperature for multilayer inductors with increased operating temperatures
Reimann, Timmy; Capraro, Beate; Bartsch, Heike; Töpfer, Jörg | Zeitschriftenaufsatz |
| 2021 | Piezoresistive characteristics of MOSFET channels determined with indentation
Schlipf, Simon; Clausner, André; Paul, Jens; Capecchi, Simone; Wambera, Laura; Meier, Karsten; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2021 | Processing of large and complex-shaped fine-grained alumina bodies with high transparency
Trunec, Martin; Kastyl, Jaroslav; Stastny, Premsyl; Hildebrandt, Stefanie | Zeitschriftenaufsatz |
| 2021 | Production and properties of high entropy carbide based hardmetals
Pötschke, Johannes; Dahal, Manisha; Vornberger, Anne; Herrmann, Mathias; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2021 | Recent Insights into Rate Performance Limitations of Li-ion Batteries
Heubner, Christian; Nikolowski, Kristian; Reuber, Sebastian; Schneider, Michael; Wolter, Mareike; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2021 | Untersuchungen zum Electrochemical Machining von Wolframcarbid-Cobalt
Schubert, Nora
: Michaelis, Alexander | Dissertation |
| 2021 | Volume crystallization and microwave dielectric properties of indialite/cordierite glass by TiO2 addition
Ohsato, Hitoshi; Varghese, Jobin; Kan, Akinori; Kim, Jeong Seog; Kagomiya, Isao; Ogawa, Hirotaka; Sebastian, Mailadil Thomas; Jantunen, Heli | Zeitschriftenaufsatz |
| 2021 | Work function performance of a C12A7 electride surface exposed to low pressure low temperature hydrogen plasmas
Heiler, Adrian; Wätzig, Katja; Tajmar, Martin; Friedl, Roland; Nocentini, Riccardo; Fantz, Ursel | Zeitschriftenaufsatz |
| 2020 | 3D HR-EBSD Characterization of the plastic zone around crack tips in tungsten single crystals at the micron scale
Kalácska, Szilvia; Ast, Johannes; Ispánovity, Péter Dusán; Michler, Johann; Maeder, Xavier | Zeitschriftenaufsatz |
| 2020 | 3D-gedruckte Keramikteile für Luft- und Raumfahrtanwendungen
Abel, Johannes; Tiwari, Siddharth; Lafont, Ugo | Zeitschriftenaufsatz |
| 2020 | Acoustic Resonance Recognition of Coins
Kraljevski, Ivan; Duckhorn, Frank; Ju, Yong Chul; Tschöpe, Constanze; Richter, Christian; Wolff, Matthias | Konferenzbeitrag |
| 2020 | Acoustic resonance testing of glass IV bottles
Kraljevski, Ivan; Duckhorn, Frank; Ju, Yong Chul; Tschöpe, Constanze; Wolff, Matthias | Konferenzbeitrag |
| 2020 | All-silicon polarized light source based on electrically excited whispering gallery modes in inversely tapered photonic resonators
Schmitt, Sebastian; Schwarzburg, Klaus; Sarau, George; Christiansen, Silke; Wiesner, Sven; Dubourdieu, Catherine | Zeitschriftenaufsatz |
| 2020 | Analyse von Schwindungsfeldern bei planaren LTCC-Substraten und deren Berücksichtigung im Entwurf von mikrosystemtechnischen Komponenten
Lenz, Christian
: Michaelis, Alexander | Dissertation |
| 2020 | Anisotropy of Mechanical Properties of Pinctada margaritifera Mollusk Shell
Strag, Martyna; Maj, Åukasz; Bieda, Magdalena; Petrzak, PaweÅ; Jarzebska, Anna; Gluch, Jürgen; Topal, Emre; Kutukova, Kristina; Clausner, André; Heyn, Wieland; Berent, Katarzyna; Nalepka, Kinga; Zschech, Ehrenfried; Checa, Antonio G.; Sztwiertnia, Srzysztof | Zeitschriftenaufsatz |
| 2020 | Application of composite coatings as protection/contacting layers for metallic high-chromium-content SOFC interconnect material
Sauchuk, Viktar; Trofimenko, Nikolai; Megel, Stefan; Rothe, Stefan; Schilm, Jochen; Andritschky, Martin; Hiller, Michael; Goebel, Claudia; Froitzheim, Jan; Kusnezoff, Mihails | Konferenzbeitrag |
| 2020 | Application-Oriented Modeling and Optimization of Tailored Li-Ion Batteries Using the Concept of Diffusion Limited C-rate
Heubner, Christian; Reuber, Sebastian; Seeba, Jann; Marcinkowski, Peter; Nikolowski, Kristian; Schneider, Michael; Wolter, Mareike; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Beschichtung für implantierbare medizinische Geräte, Verfahren zu deren Herstellung sowie implantierbares medizinisches Gerät
Balakin, Sascha; Opitz, Jörg | Patent |
| 2020 | Biospeckle-characterization of hairy root cultures using laser speckle photometry
Schott, Carolin; Steingroewer, Juliane; Bley, Thomas; Cikalova, Ulana; Bendjus, Beatrice | Zeitschriftenaufsatz |
| 2020 | Breakthrough Screening of Porous Materials: A Simple and Effective Tool for Database Generation
Piscopo, Calogero Giancarlo; Polyzoidis, Angelos; Werner, David; Ahlhelm, Matthias; Richter, Hans-Jürgen | Zeitschriftenaufsatz |
| 2020 | CerAMfacturing of Si3N4 components
Scheithauer, Uwe; Abel, Johannes; Schwarzer, Eric; Weingarten, Steven; Kunz, Willy; Moritz, Tassilo; Klemm, Hagen | Zeitschriftenaufsatz |
| 2020 | Ceramic injection moulding: Developments in production technology, materials and applications
Moritz, Tassilo | Zeitschriftenaufsatz |
| 2020 | Ceramic microhotplates for low power metal oxide gas sensors
Samotaev, Nikolay; Oblov, Konstantin; Gorshkova, Anastasiya; Fritsch, Marco; Mosch, Sindy; Vinnichenko, Mykola; Trofimenko, Nikolai; Kusnezoff, Mihails; Fuchs, Franz-Marin; Wissmeier, Lena | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2020 | Ceramic-like composite systems for winding insulation of electrical machines
Miersch, Sören; Schubert, Ralph; Schuhman, Thomas; Schuffenhauer, Uwe; Buddenbohm, Markus; Beyreuther, Markus; Kuhn, Jeannette; Lindner, Mathias; Cebulski, Bernd; Jung, Jakob | Konferenzbeitrag |
| 2020 | Changes in the coating composition due to APS process conditions for Al2O3-Cr2O3-TiO2 ternary powder blends
Grimm, Maximilian; Conze, Susan; Berger, Lutz-Michael; Paczkowski, Gerd; Drehmann, Rico; Lampke, Thomas | Zeitschriftenaufsatz |
| 2020 | Characterization of a silicon nitride ceramic material for ceramic springs
Khader, I.; Koplin, C.; Schröder, C.; Stockmann, Jens; Beckert, Wieland; Kunz, Willy; Kailer, A. | Zeitschriftenaufsatz |
| 2020 | Characterization of Ceramics based on Laser Speckle Photometry
Chen, Lili; Cikalova, Ulana; Münch, Stefan; Bendjus, Beatrice; Röllig, Mike | Zeitschriftenaufsatz |
| 2020 | Chemoadsorption for separation of Hydrogen Sulfide from biogas with iron hydroxide and sulfur recovery
Lincke, Marc; Petasch, Uwe; Gaitzsch, Uwe; Tillmann, Andreas; Tietze, Michael; Niebling, Falko | Zeitschriftenaufsatz |
| 2020 | Chronoamperometry as an electrochemical in situ approach to investigate the electrolyte wetting process of lithium-ion cells
Peter, Christian; Nikolowski, Kristian; Reuber, Sebastian; Wolter, Mareike; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Circuit-Board-Integrated transformers design and manufacture
Matz, Richard; Rabe, Torsten; Töpfer, Jörg; Ziesche, Steffen | Zeitschriftenaufsatz |
| 2020 | Complementary EIS/FTIR study of the degradation of adhesives in electronic packaging
Schneider, Michael; Gierth, Uta; Simunkova, Lenka; Gierth, Paul; Rebenklau, Lars | Zeitschriftenaufsatz |
| 2020 | Confined growth of porous nitrogen-doped cobalt oxide nanoarrays as bifunctional oxygen electrocatalysts for rechargeable zinc-air batteries
Wang, Xia; Liao, Zhongquan; Fu, Yubin; Neumann, Christof; Turchanin, Andrey A.; Nam, Gyutae; Zschech, Ehrenfried; Cho, Jaephil; Zhang, Jian; Feng, Xinliang | Zeitschriftenaufsatz |
| 2020 | Contacting Methods for C12A7 Electride Ceramic
Wätzig, Katja; Rost, Axel; Schilm, Jochen; Tajmar, M.; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Convolutional Autoencoders for Health Indicators Extraction in Piezoelectric Sensors
Kraljevski, Ivan; Duckhorn, Frank; Tschöpe, Constanze; Wolff, Matthias | Konferenzbeitrag |
| 2020 | Correction to: Magnetic Characterization of Ferromagnetic Shape Memory Components Under Defined Mechanical Loading (Shape Memory and Superelasticity, (2020), 10.1007/s40830-020-00266-2)
Ehle, F.; Neumeister, P.; Haufe, E.; Neubert, H. | Zeitschriftenaufsatz |
| 2020 | Correlative microscopy and spectroscopy workflow for microplastics
Sarau, George; Kling, Lasse; Oßmann, Barbara; Unger, Ann-Katrin; Vogler, Frank; Christiansen, Silke | Zeitschriftenaufsatz |
| 2020 | Crack identification in BEoL stacks using acoustic emission testing and nano x-ray computed tomography
Silomon, Jendrik; Gluch, Jürgen; Clausner, André; Paul, Jens; Zschech, Ehrenfried | Konferenzbeitrag |
| 2020 | Crack-healing in ytterbium silicate filled with silicon carbide particles
Kunz, Willy; Klemm, Hagen; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Creation of modified Cr3C2-NiCr hardmetal coating microstructures through novel processing
Matthews, Steven; Bhagvandas, Meetal; Berger, Lutz-Michael | Zeitschriftenaufsatz |
| 2020 | Critical assessment of analytical methods for the harmonized and cost-efficient analysis of microplastics
Primpke, Sebastian; Christiansen, Silke; Cowger, Win; DeFrond, Hannah; Deshpande, Ashok D.; Fischer, Marten; Holland, Erika; Meyns, Michaela; O'Donnell, Bridget; Oßmann, Barbara; Pittroff, Marco; Sarau, George; Scholz-Böttcher, Barbara; Wiggin, Kara | Zeitschriftenaufsatz |
| 2020 | Critical review of processing and classification techniques for images and spectra in microplastic research
Cowger, Win; Gray, Andrew; Christiansen, Silke; DeFrond, Hannah; Deshpande, Ashok D.; Hemabessiere, Ludovic; Lee, Eunah; Mill, Leonid; Munno, Keenan; Oßmann, Barbara; Pittroff, Marco; Rochman, Chelsea; Sarau, George; Tarby, Shannon; Primpke, Sebastian | Zeitschriftenaufsatz |
| 2020 | Deep learning-based inaccuracy compensation in reconstruction of high resolution XCT data
Topal, Emre; Löffler, Markus; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2020 | Degradation analysis of CFY-stacks MK35x - a guide for exact measurement
Megel, Stefan; Rothe, Stefan; Schöne, Jakob; Sauchuk, Viktar; Trofimenko, Nikolai; Schilm, Jochen; Kusnezoff, Mihails | Konferenzbeitrag |
| 2020 | Delayed formation of thermally grown oxide in environmental barrier coatings for non-oxide ceramic matrix composites
Klemm, Hagen; Schönfeld, Katrin; Kunz, Willy | Zeitschriftenaufsatz |
| 2020 | Detailed insight into processes of reversible solid oxide cells and stacks using DRT analysis
Subotić, Vanja; Königshofer, Benjamin; Juričić, Đani; Kusnezoff, Mihails; Schroettner, Hartmuth; Hochenauer, Christoph; Boškoski, Pavle | Zeitschriftenaufsatz |
| 2020 | Determination of bulk residual stresses in superhard diamond-SiC materials
Matthey, Björn; Pirling, Thilo; Herrmann, Mathias; Schreiber, Jürgen | Zeitschriftenaufsatz |
| 2020 | Determination of the entire stent surface area by a new analytical method
Saqib, Muhammad; Bernhardt, Ricardo; Kästner, Markus; Beshchasna, Natalia; Cuniberti, Gianaurelio; Opitz, Jörg | Zeitschriftenaufsatz |
| 2020 | Development of a mass flow sensor based on Low Temperature Cofired Ceramics for analysis of exhaust gas up to 500 °C
Lohrberg, Carolin; Lenz, Christian; Kreher, Lisa; Bechtold, Franz; Carstens, Stefan; Springer, Gert; Ziesche, Steffen | Konferenzbeitrag |
| 2020 | Diepoxides and bisphosphonates as potential candidates for anti-calcification treatment of aortic heart valve bioprostheses
Maciejewska, Agnieszka; Ritter, Jan; Kiesendahl, Nicole; Zhuravleva, Irina Yu; Timchenko, Tatyana P; Bogachev-Prokophiev, Alexander V.; Menne, Matthias; Beshchasna, Natalia; Opitz, Jörg; Steinseifer, Ulrich | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2020 | Differential volumetric analysis combined with monitoring of differential ultra-sound travel time, an approach for tracing fine-structural compression behaviour of solids
Mirwald, Peter W.; Paulini, Peter; Hutzler, Thomas | Zeitschriftenaufsatz |
| 2020 | Diffusion-limited C-rate: A fundamental principle quantifying the intrinsic limits of Li-Ion batteries
Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Direct measurements of Rayleigh wave acoustoelastic constants for shot-peened superalloys
Gartsev, Sergey; Köhler, Bernd | Zeitschriftenaufsatz |
| 2020 | The E.T.PACK Project: Towards a fully passive and consumable-less deorbit kit based on low-work-function tether technology
Sanchez-Arriaga, Gonzalo; Naghdi, Samira; Wätzig, Katja; Schilm, Jochen; Lorenzini, Enrico C.; Tajmar, Martin; Urgoiti, Eduardo; Tarabini Castellani, Lorenzo; Plaza, J.F.; Post, A. | Zeitschriftenaufsatz |
| 2020 | Electrochemical Alkali-Ion Exchange in Electrode Materials for Secondary Batteries
Lein, Tobias; Heubner, Christian; Matthey, Björn; Schneider, Michael; Michaelis, Alexander | Poster |
| 2020 | Electrochemical corrosion resistance of Ni and Co bonded near-nano and nanostructured cemented carbides
Fabijanić, Tamara Aleksandrov; Kurtela, Marin; Škrinjarić, Irbas; Pötschke, Johannes; Mayer, Markus | Zeitschriftenaufsatz |
| 2020 | Electrochemical single-particle measurements of electrode materials for Li-ion batteries: Possibilities, insights and implications for future development
Heubner, Christian; Langklotz, Ulrike; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Electrodeposition of Versatile Nanostructured Sb/Sb2O3 Microcomposites
Voigt, Karsten; Heubner, Christian; Liebmann, Tobias; Matthey, Björn; Weiser, Mathias; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Engineering of Surfaces by the Use of Detonation Nanodiamonds. Towards Drug-eluting Coatings of Biomaterials
Balakin, Sascha
: Cuniberti, Gianaurelio (Gutachter); Wiesmann, Hans-Peter (Gutachter); Yeo, Jong-Souk (Gutachter) | Dissertation |
| 2020 | Enhanced KLM model for single-fibre piezocomposite transducers
Angerer, Martin; Zapf, Michael; Gebhardt, Sylvia; Neubert, Holger; Ruiter, Nicole V. | Konferenzbeitrag |
| 2020 | Epitaktische BaTiO3-basierte Schichten für elektrokalorische Untersuchungen
Engelhardt, Stefan
: Nielsch, Kornelius (Gutachter); Dörr, Kathrin (Gutachter); Michaelis, Alexander (Gutachter) | Dissertation |
| 2020 | Erforschung eines Algorithmus sowie Messsystems zur kamerabasierten Detektion und Klassifikation von lokalen Störungen spiegelnd lackierter Oberflächen
Kieselbach, Kim Katharina
: Heuer, Henning (Betreuer); Janschek, Klaus (Gutachter); Tutsch, Rainer (Gutachter); Oppermann, Martin (weiteres Mitglied) | Dissertation |
| 2020 | Experimental and numerical analysis of the complex permittivity of open-cell ceramic foams
Camacho Hernandez, Jesus Nain; Link, Guido; Soldatov, Sergey; Füssel, Alexander; Schubert, Markus; Hampel, Uwe | Zeitschriftenaufsatz |
| 2020 | Extrusion-based fabrication of electrodes for high-energy Li-ion batteries
Seeba, Jann; Reuber, Sebastian; Heubner, Christian; Müller-Köhn, Axel; Wolter, Mareike; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Facile fabrication of nanostructured alumina membranes
Voigt, Karsten; Heubner, Christian; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | FEM-study for solder model comparison on solder joints stress-strain effects
Schwerz, Robert; Metasch, René; Röllig, Mike; Meier, Karsten | Konferenzbeitrag |
| 2020 | Field-structured magnetic elastomers based on thermoplastic polyurethane for fused filament fabrication
Dohmen, Eike; Saloum, Alexander; Abel, Johannes | Zeitschriftenaufsatz |
| 2020 | Formation and crystallographic orientation of NiSi2-Si interfaces
Fuchs, Florian; Bilal Khan, Muhammad; Deb, Dipjyoti; Pohl, Darius; Schuster, Jörg; Weber, Walter M.; Mühle, Uwe; Löffler, Markus; Georgiev, Yordan M.; Erbe, Artur; Gemming, Sibylle | Zeitschriftenaufsatz |
| 2020 | Fraunhofer Institute for Ceramic Technologies and Systems IKTS. Annual Report 2019/2020
| Jahresbericht |
| 2020 | Fraunhofer-Institut für Keramische Technologien und Systeme. Jahresbericht 2019/2020
| Jahresbericht |
| 2020 | An FT-IRRAS-study of anodic oxide films on aluminum alloys and the impact of bath aging
Schneider, Michael; Gierth, Uta; Kremmer, Kerstin | Zeitschriftenaufsatz |
| 2020 | Ga-, Y-, and Sc-substituted M-type ferrites for self-biasing circulators in LTCC microwave modules
Heidenreich, Manuel; Ma, Xinyi; Gitzel, Wanja; Jacob, Arne; Capraro, Beate; Töpfer, Jörg | Zeitschriftenaufsatz |
| 2020 | GITT Analysis of Lithium Insertion Cathodes for Determining the Lithium Diffusion Coefficient at Low Temperature: Challenges and Pitfalls
Nickol, Alexander; Schied, Thomas; Heubner, Christian; Schneider, Michael; Michaelis, Alexander; Bobeth, Manfred; Cuniberti, Gianaurelio | Zeitschriftenaufsatz |
| 2020 | Grain-size effects on multi-wire slurry sawing of translucent alumina ceramics
Schmidtner, Lea; Herrmann, Mathias; Aneziris, Christos G. | Zeitschriftenaufsatz |
| 2020 | Graphene added multilayer ceramic sandwich (GMCS) composites: Structure, preparation and properties
Balazsi, Katalin; Furko, Monika; Liao, Zhongquan; Fogarassy, Zsolt; Medved, David; Zschech, Ehrenfried; Dusza, Jan; Balazsi, Csaba | Zeitschriftenaufsatz |
| 2020 | Grüner Wasserstoff in der Rohstahlerzeugung
Herz, Gregor; Müller, Nils; Adam, Paul; Megel, Stefan; Reichelt, Erik; Jahn, Matthias | Zeitschriftenaufsatz |
| 2020 | High temperature Co-electrolysis as a key technology for CO2 emission mitigation - A model-based assessment of CDA and CCU
Herz, Gregor; Müller, Nils; Adam, Paul; Megel, Stefan; Reichelt, Erik; Jahn, Matthias | Zeitschriftenaufsatz |
| 2020 | High Temperature Packaging for Sensor Elements
Rebenklau, Lars; Gierth, Paul; Barth, Henry | Konferenzbeitrag |
| 2020 | High-Rate laser surface texturing for advanced tribological functionality
Schille, Jörg; Schneider, Lutz; Mauersberger, Stefan; Szokup, Sylvia; Höhn, Sören; Pötschke, Johannes; Reiß, Friedemann; Leidich, Erhard; Löschner, Udo | Zeitschriftenaufsatz |
| 2020 | High-velocity water vapor corrosion of Yb-silicate: Sprayed vs. sintered body
Bakan, Emine; Kindelmann, Moritz; Kunz, Willy; Klemm, Hagen; Vaßen, Robert | Zeitschriftenaufsatz |
| 2020 | Hochtemperaturversiegelung für thermisch gespritzte Schichten
Hildebrandt, Stefanie; Berger, Lutz-Michael | Zeitschriftenaufsatz |
| 2020 | Hydrogel-based chemical and biochemical sensors
Gerlach, Gerald; Günther, Margarita; Härtling, Thomas | Zeitschriftenaufsatz |
| 2020 | Hydrophobic, carbon free gas diffusion electrode for alkaline applications
Bekisch, Artur; Skadell, Karl; Poppitz, David; Schulz, Matthias; Weidl, Roland; Stelter, Michael | Zeitschriftenaufsatz |
| 2020 | Impact of precrystallized NaYSi4O12 powders in the synthesis of sodium conducting solid electrolytes
Wagner, Dörte; Schilm, Jochen; Lee, Chang Woo; Kusnezoff, Mihails | Zeitschriftenaufsatz |
| 2020 | In situ preparation of crosslinked polymer electrolytes for lithium ion batteries: A comparison of monomer systems
Röchow, Eike Thomas; Coeler, Matthias; Pospiech, Doris; Kobsch, Oliver; Mechtaeva, Elizaveta; Vogel, Roland; Voit, Brigitte; Nikolowski, Kristian; Wolter, Mareike | Zeitschriftenaufsatz |
| 2020 | In vitro characterization of osteoblast cells on polyelectrolyte multilayers containing detonation nanodiamonds
Balakin, Sascha; Yun, Young-Shik; Lee, Jihye; Kang, Eun-Hye; Spohn, Juliane; Yun, In-Sik; Opitz, Jörg; Cuniberti, Gianaurelio; Yeo, Jong-Souk | Zeitschriftenaufsatz |
| 2020 | In-operando monitoring and lifetime improvement of SOFCs on single-cell and stack level
Subotić, Vanja; Kusnezoff, Mihails; Pofahl, Stefan; Lawlor, Vincent; Königshofer, Benjamin; Napporn, Teko W.; Megel, Stefan; Hochenauer, Christoph | Konferenzbeitrag |
| 2020 | Influence of cemented carbide composition on cutting temperatures and corresponding hot hardnesses
Vornberger, Anne; Picker, Tobias; Pötschke, Johannes; Herrmann, Mathias; Denkena, Berend; Krödel, Alexander; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Influence of microstructure on hardness and thermal conductivity of hardmetals
Vornberger, Anne; Pötschke, Johannes; Gestrich, Tim; Herrmann, Mathias; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Influence of surface characteristics on the penetration rate of electrolytes into model cells for lithium ion batteries
Beyer, Sebastian; Kobsch, Oliver; Pospiech, Doris; Simon, Frank; Peter, Christian; Nikolowski, Kristian; Wolter, Mareike; Voit, Brigitte | Zeitschriftenaufsatz |
| 2020 | Influence of the brazing paste composition on the wetting behavior of reactive air brazed metal-ceramic joints
Wätzig, Katja; Schilm, Jochen; Mosch, Sindy; Tillmann, Wolfgang; Eilers, Arne; Wojarski, Lukas | Zeitschriftenaufsatz |
| 2020 | Influence of tool material properties on the wear behavior of cemented carbide tools with rounded cutting edges
Denkena, Berend; Michaelis, Alexander; Herrmann, Mathias; Pötschke, Johannes; Krödel, Alexander; Vornberger, Anne; Picker, Tobias | Zeitschriftenaufsatz |
| 2020 | Infrared transparent ceramic windows 2 for high-speed vehicles
Ragulya, Andrey; Kolesnichenko, Valeriy; Herrmann, Mathias | Konferenzbeitrag |
| 2020 | Insights into the electrochemical Li/Na-exchange in layered LiCoO2 cathode material
Heubner, Christian; Matthey, Björn; Lein, Tobias; Wolke, Florian; Liebmann, Tobias; Lämmel, Christoph; Schneider, Michael; Herrmann, Mathias; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Intercalation materials for secondary batteries based on alkali metal exchange: Developments and perspectives
Heubner, Christian; Lein, Tobias; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Investigation of the passive layer on a solid-state sintered silicon carbide ceramic formed in sulfuric acid
Schneider, Michael; Kremmer, Kerstin; Voigt, Markus; Grundmeier, Guido | Zeitschriftenaufsatz |
| 2020 | Investigations of internal stresses in high-voltage devices with deep trenches
Hieckmann, Ellen; Mühle, Uwe; Chekhonin, Paul; Zschech, Ehrenfried; Gambino, Jeff | Zeitschriftenaufsatz |
| 2020 | Das Konzept der Metallionen-Hybridbatterie am Beispiel ausgewählter Oxidsysteme
Maletti, Sebastian
: Michaelis, Alexander | Dissertation |
| 2020 | Korrosion und elektrochemisches Verhalten von siebgedruckten Metall-Keramik-Werkstoffverbunden
Junker, Nils
: Michaelis, Alexander (1. Gutachter); Feser, Ralf (2. Gutachter) | Dissertation |
| 2020 | Lightweight polymer-carbon composite current collector for lithium-ion batteries
Fritsch, Marco; Coeler, Matthias; Kunz, Karina; Krause, Beate; Marcinkowski, Peter; Pötschke, Petra; Wolter, Mareike; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Local mechanical properties at the dendrite scale of Ni-Based superalloys studied by advanced high temperature indentation creep and micropillar compression tests
Haußmann, Lukas; Neumeier, Steffen; Kolb, Markus; Ast, Johannes; Mohanty, Gaurav; Michler, Johann; Göken, Mathias | Konferenzbeitrag |
| 2020 | Low work-function tether Deorbit Kit
Tarabini-Castellani, Lorenzo; Ortega, Alberto; Gimenéz, Alvaro; Urgoiti, Eduardo; Sanchez-Arriaga, Gonzalo; Borderes-Motta, Gabriel; Lorenzini, Enrico C.; Tajmar, Martin; Wätzig, Katja; Post, Angel; Plaza, J.F. | Zeitschriftenaufsatz |
| 2020 | LTCC Embedding of SiC Power Devices for High Temperature Applications over 400 °C
Bayer, Benjamin; Groccia, Mario; Bach, Hoang Linh; Bayer, Christoph Friedrich; Schletz, Andreas; Lenz, Christian; Ziesche, Steffen | Konferenzbeitrag |
| 2020 | Magnetic characterization of ferromagnetic shape memory components under defined mechanical loading
Ehle, Fabian; Neumeister, Peter; Haufe, Eric; Neubert, Holger | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2020 | Material characterization of additively manufactured metals by laser speckle photometry
Dang, David; Elspaß, Arno; Cikalova, Ulana; Kleszczynski, Stefan; Bendjus, Beatrice; Witt, Gerd | Konferenzbeitrag |
| 2020 | Matrix techniques for Lamb-wave damage imaging in metal plates
Neubeck, Robert; Kexel, Christian; Moll, Jochen | Zeitschriftenaufsatz |
| 2020 | Mechanical and microstructural characterization of LTCC and HTCC ceramics for high temperature and harsh environment application
Naumann, Falk; Lorenz, Georg; Bernasch, Michael; Boettge, Bianca; Schischka, Jan; Ziesche, Steffen; Pernau, Hans-Fridtjof; Jaegle, Martin; Klengel, Sandy; Kappert, Holger | Konferenzbeitrag |
| 2020 | Mechanochemical versus chemical routes for graphitic precursors and their performance in micropollutants removal in water
Mahmoud, Alaa El Din; Franke, Marcus; Stelter, Michael; Bräutigam, Patrick | Zeitschriftenaufsatz |
| 2020 | Messung der Verbiegung der Knochenplatte
Neubert, Holger | Aufsatz in Buch |
| 2020 | Methanol-to-Olefins in a membrane reactor with in situ steam removal - The decisive role of coking
Best, Felix; Mundstock, Alexander; Dräger, Gerald; Rusch, Pascal; Bigall, Nadja C.; Richter, Hannes; Caro, Jürgen | Zeitschriftenaufsatz |
| 2020 | Microstructural investigations in binderless tungsten carbide with grain growth inhibitors
Lay, Sabine; Antoni-Zdziobek, Annie; Pötschke, Johannes; Herrmann, Mathias | Zeitschriftenaufsatz |
| 2020 | Microstructure and interface characteristics of 17-4PH/YSZ components after Co-Sintering and hydrothermal corrosion
Günther, Anne; Moritz, Tassilo; Mühle, Uwe | Zeitschriftenaufsatz |
| 2020 | Microstructure and sliding wear resistance of plasma sprayed Al2O3-Cr2O3-TiO2 ternary coatings from blends of single oxides
Grimm, Maximilian; Conze, Susan; Berger, Lutz-Michael; Paczkowski, Gerd; Lindner, Thomas; Lampke, Thomas | Zeitschriftenaufsatz |
| 2020 | A mode-switchable guided elastic wave transducer
Köhler, Bernd; Kim, Jongtak; Chwelatiuk, Konrad; Tschöke, Kilian; Schubert, Frank; Schubert, Lars | Zeitschriftenaufsatz |
| 2020 | Modeling of a Novel Atmospheric SOFC/GT Hybrid Process and Comparison with State-of-the-Art SOFC System Concepts
Cardenas de la Cruz, Cesar Teodoro; Herz, Gregor; Reichelt, Erik; Jahn, Matthias | Zeitschriftenaufsatz |
| 2020 | Modification of titanium implants using biofunctional nanodiamonds for enhanced antimicrobial properties
Krok, Emilia; Balakin, Sascha; Jung, Jonas; Groß, Frank; Opitz, Jörg; Cuniberti, Gianaurelio | Zeitschriftenaufsatz |
| 2020 | Modifizierung der Faser-Matrix-Anbindung in keramischen Faserverbundwerkstoffen
Steinborn, Clemens
: Michaelis, Alexander (1. Gutachter); Krenkel, Walter (2. Gutachter) | Dissertation |
| 2020 | Multi-scale X-ray tomography and machine learning algorithms to study MoNi4 electrocatalysts anchored on MoO2 cuboids aligned on Ni foam
Topal, Emre; Liao, Zhongquan; Löffler, Markus; Gluch, Jürgen; Zhang, Jian; Feng, Xinliang; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2020 | Multi-wire sawing of translucent alumina ceramics
Schmidtner, Lea; Heinrich, Hannes; Fuchs, Marcel; Pötzsch, Anke; Janz, Stefan; Herrmann, Mathias; Aneziris, Christos G.; Kaden, Thomas | Zeitschriftenaufsatz |
| 2020 | Multilayer ferrite inductors for the use at high temperatures
Bartsch, Heike; Thiele, Sebastian; Müller, Jens; Schabbel, Dirk; Capraro, Beate; Reimann, Timmy; Grund, Steffen; Töpfer, Jörg | Zeitschriftenaufsatz |
| 2020 | Musical pitch quantization as an eigenvalue problem
Graben, Peter beim; Mannone, Maria | Zeitschriftenaufsatz |
| 2020 | Nanoindentation to investigate IC stability using ring oscillator circuits as a CPI sensor
Schlipf, Simon; Clausner, André; Paul, Jens; Capecchi, Simone; Wambera, Laura; Meier, Karsten; Zschech, Ehrenfried | Konferenzbeitrag |
| 2020 | Novel micro-scale specimens for mode-dependent fracture testing of brittle materials: A case study on GaAs single crystals
Ast, Johannes; Schwiedrzik, Jakob; Rohbeck, Nadia; Maeder, Xavier; Michler, Johann | Zeitschriftenaufsatz |
| 2020 | Number-based characterization of microplastics
Oelschlägel, Kathrin; Benke, Annegret; Göhler, Daniel; Potthoff, Annegret; Rudolph, Andreas | Poster |
| 2020 | Numerical and experimental study of the mechanical response of diatom frustules
Topal, Emre; Rajendran, Hariskaran; Zglobicka, Izabela; Gluch, Jürgen; Liao, Zhongquan; Clausner, André; Kurzydłowski, Krzysztof Jan; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2020 | Observation of yttrium oxide segregation in a ZrO2-SiO2 glass-ceramic at nanometer dimensions
Fu, Le; Wang, Yiren; Riekehr, Lars; Räthel, Jan; Engqvist, Håkan; Xia, Wei | Zeitschriftenaufsatz |
| 2020 | Offenzelliges Keramiknetzwerk und Verfahren zu seiner Herstellung
Füssel, Alexander; Adler, Jörg | Patent |
| 2020 | On the application of actively and passively excited guided elastic waves for the monitoring of fiber-reinforced plastics
Tschöke, Kilian; Gaul, Tobias; Pietzsch, Alexander; Schulze, Eberhard; Schubert, Lars | Zeitschriftenaufsatz |
| 2020 | Optimization of K-Cu-Mo promoted iron Fischer-Tropsch catalyst. A design-of-experiments approach
Wolke, Florian; Voigt, Markus; Medicus, M.; Reichelt, Erik; Jahn, Matthias | Poster |
| 2020 | Optimization of supported iron-based Fischer-Tropsch catalysts for higher alcohol production
Medicus, Maximilian; Merkel, Michael; Reichelt, Erik; Jahn, Matthias | Poster |
| 2020 | Oxidation behaviour of silicon carbide bonded diamond materials
Herrmann, Mathias; Adloff, Lena; Matthey, Björn; Gestrich, Tim | Zeitschriftenaufsatz |
| 2020 | Phthalocyanine-based 2D conjugated metal-organic framework nanosheets for high-performance micro-supercapacitors
Wang, Mingchao; Shi, Huanhuan; Zhang, Panpan; Liao, Zhongquan; Wang, Mao; Zhong, Haixia; Schwotzer, Friedrich; Shaygan Nia, Ali; Zschech, Ehrenfried; Zhou, Shengqian; Kaskel, Stefan; Dong, Renhao; Feng, Xinliang | Zeitschriftenaufsatz |
| 2020 | Polungsstrategien und Eigenschaftsoptimierung für integrierte piezoelektrische Keramiken
Eßlinger, Sophia
: Michaelis, Alexander | Dissertation |
| 2020 | Porous sandwich ceramic of layered silicon nitride-zirconia composite with various multilayered graphene content
Balazsi, Katalin; Furko, Monika; Liao, Zhongquan; Gluch, Jürgen; Medved, David; Sedlák, Richard; Dusza, Jan; Zschech, Ehrenfried; Balazsi, Csaba | Zeitschriftenaufsatz |
| 2020 | Pressureless sintering and properties of boron carbide composite materials
Martin, Hans-Peter; Feng, Bing; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Printed miniaturized platinum heater on ultra-thin ceramic membrane for mox gas sensors
Fritsch, Marco; Mosch, Sindy; Vinnichenko, Mykola; Trofimenko, Nikolai; Kusnezoff, Mihails; Fuchs, Franz-Martin; Wissmeier, Lena; Samotaev, Nikolay; Oblov, Konstantin | Abstract |
| 2020 | Process data-based knowledge discovery in additive manufacturing of ceramic materials by multi-material jetting (CerAM MMJ)
Lang, Valentin; Weingarten, Steven; Wiemer, Hajo; Scheithauer, Uwe; Glausch, Felix; Johne, Robert; Michaelis, Alexander; Ihlenfeldt, Steffen | Zeitschriftenaufsatz |
| 2020 | Processing of Sulfide Solid Electrolytes for All-Solid-State Battery Electrodes. A Scalable Composite Cathode Manufacturing Approach
Auer, Henry; Seidel, Matthias; Heubner, Christian; Nikolowski, Kristian; Reuber, Sebastian; Wolter, Mareike | Vortrag |
| 2020 | Promoted oxygen reduction kinetics on nitrogen-doped hierarchically porous carbon by engineering proton-feeding centers
Chen, Guangbo; Wang, Tao; Liu, Pan; Liao, Zhongquan; Zhong, Haixia; Wang, Gang; Zhang, Panpan; Yu, Minghao; Zschech, Ehrenfried; Chen, Mingwei; Zhang, Jian; Feng, Xinliang | Zeitschriftenaufsatz |
| 2020 | Publisher Correction: Synergistic electroreduction of carbon dioxide to carbon monoxide on bimetallic layered conjugated metal-organic frameworks
Zhong, H.; Ghorbani-Asl, M.; Ly, K.H.; Zhang, J.; Ge, J.; Wang, M.; Liao, Z.; Makarov, D.; Zschech, E.; Brunner, E.; Weidinger, I.M.; Zhang, J.; Krasheninnikov, A.V.; Kaskel, S.; Dong, R.; Feng, X. | Zeitschriftenaufsatz |
| 2020 | Pyrocatalysis - The DCF assay as a pH-robust tool to determine the oxidation capability of thermally excited pyroelectric powders
Raufeisen, Sascha; Stelter, Michael; Bräutigam, Patrick | Zeitschriftenaufsatz |
| 2020 | Pyrocatalytic oxidation - strong size-dependent poling effect on catalytic activity of pyroelectric BaTiO3 nano- and microparticles
Raufeisen, Sascha; Neumeister, Peter; Buchheim, Johannes; Stelter, Michael; Bräutigam, Patrick | Zeitschriftenaufsatz |
| 2020 | Quantitative detection of anodic oxygen evolution on solid state sintered silicon carbide under near ECM conditions
Schneider, Michael; Simunkova, Lenka; Junker, Nils; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Reaktionsgefügte keramische Bauteile und Verfahren zu ihrer Herstellung
Kunze, Steffen; Adler, Jörg; Heymer, Heike | Patent |
| 2020 | Real embedding process of SiC devices in a monolithic ceramic package using LTCC technology
Lenz, Christian; Ziesche, Steffen; Schletz, Andreas; Bach, Hoang Linh; Erlbacher, Thomas | Konferenzbeitrag |
| 2020 | Recent Advances in Manufacturing Innovative Stents
Beshchasna, Natalia; Saqib, Muhammad; Kraśkiewicz, Honorata; Wasyluk, Łukasz; Kuzmin, Oleg; Duta, Oana Cristina; Ficai, Denisa; Ghizdăveţ, Zeno; Marin, Alexandru; Ficai, Anton; Sun, Zhilei; Pichugin, Vladimir F.; Opitz, Jörg; Andronescu, Ecaterina | Zeitschriftenaufsatz |
| 2020 | Reduced sintering temperatures of Li+ conductive Li1.3Al0.3Ti1.7(PO4)3 ceramics
Wätzig, Katja; Heubner, Christian; Kusnezoff, Mihails | Zeitschriftenaufsatz |
| 2020 | Relation between hardmetal properties and process temperatures during metal cutting
Vornberger, Anne; Pötschke, Johannes; Herrmann, Mathias; Picker, Tobias; Michaelis, Alexander | Konferenzbeitrag |
| 2020 | Robust development, validation and manufacturing processes for hybrid metal-composite lightweight structures
Haider, Daniel Reinhold; Gerritzen, J.; Folprecht, F.; Krahl, M.; Spitzer, S.; Gude, M.; Hillmann, S.; Köhler, B.; Kopycinska-Müller, M.; Schulze, M.; Heuer, H.; Opitz, Jörg | Konferenzbeitrag |
| 2020 | The role of balancing nanostructured silicon anodes and NMC cathodes in lithium-ion full-cells with high volumetric energy density
Baasner, Anne; Reuter, Florian; Seidel, Matthias; Krause, Andreas; Pflug, Erik; Härtel, Paul; Dörfler, Susanne; Abendroth, Thomas; Althues, Holger; Kaskel, Stefan | Zeitschriftenaufsatz |
| 2020 | Scalable fabrication of gold nanoparticles with adjustable size distribution as catalytic nuclei for the CVD growth of silicon nanowires
Langklotz, Ulrike; Lein, Tobias; Schulze, Claudia; Weiser, Mathias; Krause, Andreas; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2020 | Schichtperowskittemplate für die Texturierung von bleifreien KNN-Keramiken
Briegel, Christoph
: Michaelis, Alexander | Dissertation |
| 2020 | Selektive Synthese von höheren Alkoholen an eisenbasierten Katalysatoren
Schaller, Max Rudolf
: Michaelis, Alexander (Gutachter); Turek, Thomas (Gutachter); Jahn, Matthias (Gutachter) | Dissertation |
| 2020 | Simulating permeabilities based on 3D image data of a layered nano-porous membrane
Prill, Torben; Redenbach, Claudia; Roldan, Diego; Godehardt, Michael; Schladitz, Katja; Höhn, Sören; Sempf, Kerstin | Zeitschriftenaufsatz |
| 2020 | Simulationsbasierte Optimierung eines Messstandes zur optischen Vermessung von thermo-mechanischen Verformungen
Schwerz, Robert; Röllig, Mike | Konferenzbeitrag |
| 2020 | Simulationsgestützte Analyse von Through-hole Technology Verbindungsstellen der Elektronik im Automobilbereich
Berger, R.; Olfe, Jürgen; Rogowski, Sebastian; Röllig, Mike; Münch, Stefan; Schwerz, Robert; Heuer, Henning | Konferenzbeitrag |
| 2020 | A sodium polysulfide battery with liquid/solid electrolyte: Improving sulfur utilization using P2S5 as additive and tetramethylurea as catholyte solvent
Medenbach, Lukas; Hartmann, Pascal; Janek, Jürgen; Stettner, Timo; Balducci, Andrea; Dirksen, Cornelius; Schulz, Martin; Stelter, Michael; Adelhelm, Philipp | Zeitschriftenaufsatz |
| 2020 | SOEC a key for power-to-x processes
Megel, Stefan; Jahn, Matthias | Vortrag |
| 2020 | Sonochemical coating: Effect of energy input and distance on the functionalization of textiles with TiO2 and ZnO-Nanoparticles
Weiße, Maik; Schmidt, C.; Abramova, Anna V.; Voitov, Yuri; Stelter, Michael; Bräutigam, Patrick | Zeitschriftenaufsatz |
| 2020 | The sorption behaviour of amine micropollutants on polyethylene microplastics - impact of aging and interactions with green seaweed
Vockenberg, Thorben; Wichard, Thomas; Ueberschaar, Nico; Franke, Marcus; Stelter, Michael; Bräutigam, Patrick | Zeitschriftenaufsatz |
| 2020 | Sources of parasitic features in the visible range of oxide transparent ceramics absorption spectra
Goldstein, Adrian; Katz, Michael; Boulesteix, Rémy; Shames, Alexander; Coureau, Christope; Räthel, Jan; Mateos-Ferre, Xavier; Loiko, Pavel | Zeitschriftenaufsatz |
| 2020 | Stress-induced transistor degradation studied by an indentation approach
Schlipf, Simon; Clausner, André; Paul, Jens; Capecchi, Simone; Wambera, Laura; Meier, Karsten; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2020 | Study of structure and properties of Fe-based amorphous ribbons after pulsed laser interference heating
Czyz, Olaf; Kusinski, Jan; Radziszewska, Agnieszka; Liao, Zhongquan; Zschech, Ehrenfried; Kac, Malgorzata; Ostrowski, Roman | Zeitschriftenaufsatz |
| 2020 | Sustainable industrial wastewater reuse using ceramic nanofiltration: Results from two pilot projects in the oil and gas and the ceramics industries
Beery, Martan; Pflieger, Christian; Weyd, Marcus | Zeitschriftenaufsatz |
| 2020 | Synergistic electroreduction of carbon dioxide to carbon monoxide on bimetallic layered conjugated metal-organic frameworks
Zhong, Haixia; Ghorbani-Asl, Mahdi; Ly, Khoa Hoang; Zhang, Jichao; Ge, Jin; Wang, Mingchao; Liao, Zhongquan; Makarov, Denys; Zschech, Ehrenfried; Brunner, Eike; Weidinger, Inez M.; Zhang, Jian; Krasheninnikov, Arkady V.; Kaskel, Stefan; Dong, Renhao; Feng, Xinliang | Zeitschriftenaufsatz |
| 2020 | Synthesis and sintering of Li1.3Al0.3Ti1.7(PO4)3 (LATP) electrolyte for ceramics with improved Li+ conductivity
Wätzig, Katja; Rost, Axel; Heubner, Christian; Coeler, Matthias; Nikolowski, Kristian; Wolter, Mareike; Schilm, Jochen | Zeitschriftenaufsatz |
| 2020 | Systematic investigation about the influence of two-step sintering on microstructure properties of ZTA ceramics
Tschirpke, Caroline; Reichel, Uwe; Begand, Sabine; Simon, Kerstin | Zeitschriftenaufsatz |
| 2020 | Thick film paste systems for multifunctional copper power modules
Reinhardt, Kathrin; Körner, Stefan; Partsch, Uwe | Konferenzbeitrag |
| 2020 | Towards a wastewater energy recovery system: The utilization of humidified ammonia by a solid oxide fuel cell stack
Stoeckl, Bernhard; Preininger, Michael; Subotić, Vanja; Megel, Stefan; Folgner, Christoph; Hochenauer, Christoph | Zeitschriftenaufsatz |
| 2020 | Transparent Ceramics
Goldstein, Adrian; Krell, Andreas; Burshstein, Zeev | Buch |
| 2020 | Treatment with bisphosphonates to mitigate calcification of elastin-containing bioprosthetic materials
Zhuravleva, Irina Y.; Polienko, Yuliya F.; Karpova, Elena V.; Timchenko, Tatyana P; Vasilieva, Maria B.; Baratova, Ludmila A.; Shatskaya, Svetlana S.; Kuznetsova, Elena V.; Nichay, Nataliya R.; Beshchasna, Natalia; Bogachev-Prokophiev, Alexander V. | Zeitschriftenaufsatz |
| 2020 | Two-Dimensional boronate ester covalent organic framework thin films with large single crystalline domains for neuromorphic memory device
Park, Sang Wook; Liao, Zhongquan; Ibarlucea, Bergoi; Qi, Haoyuan; Lin, Hung-Hsuan; Becker, Daniel; Melidonie, Jason; Zhang, Tao; Sahabudeen, Hafeesudeen; Baraban, Larysa; Baek, Chang-Ki; Zheng, Zhikun; Zschech, Ehrenfried; Fery, Andreas; Heine, Thomas; Kaiser, Ute; Cuniberti, Gianaurelio; Dong, Renhao; Feng, Xinliang | Zeitschriftenaufsatz |
| 2020 | Two‐Dimensional Boronate Ester Covalent Organic Framework Thin Films with Large Single Crystalline Domains for a Neuromorphic Memory Device
Park, S.; Liao, Z.; Ibarlucea, B.; Qi, H.; Lin, H.-H.; Becker, D.; Melidonie, J.; Zhang, T.; Sahabudeen, H.; Baraban, L.; Baek, C.-K.; Zheng, Z.; Zschech, E.; Fery, A.; Heine, T.; Kaiser, U.; Cuniberti, G.; Dong, R.; Feng, X. | Zeitschriftenaufsatz |
| 2020 | Untersuchungen zum Einfluss von Signalgrößen auf Prozesscharakteristika beim Pulsanodisieren von Aluminium
Lämmel, Christoph
: Michaelis, Alexander | Dissertation |
| 2020 | Utilizing acoustic emission signals to evaluate BEoL stack damages of two different sample systems caused by Cu-pillar shear-off
Silomon, Jendrik; Clausner, André; Zschech, Ehrenfried | Konferenzbeitrag |
| 2020 | Verfahren zur Herstellung von individuell gekennzeichneten Bauteilen
Scheithauer, Uwe; Weingarten, Steven; Johne, Robert; Müller-Wittig, Wolfgang | Patent |
| 2020 | Weiterentwicklung von Schichten aus dem System Al2O3-TiO2
Conze, Susan; Berger, Lutz-Michael; Richter, Alexei; Vaßen, Robert | Zeitschriftenaufsatz |
| 2020 | Werkzeugintegrierte Sensorik zur Onlineüberwachung von Fräsprozessen
Ettrichrätz, Martin; Gebhardt, Sylvia | Zeitschriftenaufsatz |
| 2020 | Wet chemical deposition of BN, SiC and Si3N4 interphases on SiC fibers
Nöth, Andreas; Maier, Jonathan; Schönfeld, Katrin; Klemm, Hagen | Zeitschriftenaufsatz |
| 2020 | Zinc-Mediated template synthesis of Fe-N-C electrocatalysts with densely accessible Fe-Nx active sites for efficient oxygen reduction
Chen, Guangbo; Liu, Pan; Liao, Zhongquan; Sun, Fanfei; He, Yanghua; Zhong, Haixia; Zhang, Tao; Zschech, Ehrenfried; Chen, Mingwei; Wu, Gang; Zhang, Jian; Feng, Xinliang | Zeitschriftenaufsatz |
| 2019 | 3D Diatom-Designed and selective laser melting (SLM) manufactured metallic structures
Zglobicka, Izabela; Chmielewska, Agnieszka; Topal, Emre; Kutukova, Kristina; Gluch, Jürgen; Krüger, Peter; Kilroy, Cathy; Święszkowski, Wojciech; Kurzydłowski, Krzysztof Jan; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2019 | 3D-customized thin-walled ceramic mouldings produced by deep drawing of green tapes
Schwarzer, Eric; Olawsky, Lukas; Hagen, Florian; Scheithauer, Uwe; Moritz, Tassilo; Richter, Hans-Jürgen; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2019 | Additive manufacturing of ceramic components
Scheithauer, Uwe; Richter, Jürgen | Aufsatz in Buch |
| 2019 | Additive manufacturing of functionalized glass components
Schilm, Jochen; Moritz, Tassilo; Wagner, Dörte; Schwarzer, Eric; Weingarten, Steven; Wätzig, Katja | Zeitschriftenaufsatz |
| 2019 | Additive Manufacturing of Functionally Graded Ceramic Materials by Stereolithography
Gonzales, Pablo; Schwarzer, Eric; Scheithauer, Uwe; Kooijmans, Norbertus; Moritz, Tassilo | Zeitschriftenaufsatz |
| 2019 | Alternative process routes to manufacture porous ceramics - Opportunities and challenges
Scheithauer, Uwe; Kerber, Florian; Füssel, Alexander; Holtzhausen, Stefan; Beckert, Wieland; Schwarzer, Eric; Weingarten, Steven; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2019 | Ammonia as promising fuel for solid oxide fuel cells: Experimental analysis and performance evaluation
Stoeckl, Bernhard; Preininger, Michael; Subotić, Vanja; Schroettner, Hartmuth; Sommersacher, Peter; Seidl, Michael; Megel, Stefan; Hochenauer, Christoph | Konferenzbeitrag |
| 2019 | Analysis of flip-chip solder joints under isothermal vibration loading
Meier, Karsten; Leslie, David; Dasgupta, Abhijit; Röllig, Mike; Bock, Karlheinz | Konferenzbeitrag |
| 2019 | Anodic dissolution of chromium at high current densities in sodium nitrate electrolyte
Schneider, Michael; Simunkova, Lenka; Manko, Michal; Lohrengel, M.M.; Hoogsteen, W. | Zeitschriftenaufsatz |
| 2019 | Anodizing - interplay between bath aging and oxide formation and properties
Schneider, Michael; Kremmer, Kerstin; Gierth, Uta | Zeitschriftenaufsatz |
| 2019 | Anordnung und Verfahren zur Prüfung sensitiver Elemente oder elektrochemischer Zellen
Kusnezoff, Mihails; Trofimenko, Nikolai; Sauchuk, Viktar | Patent |
| 2019 | Anpassung des EFIT-Algorithmus zur Anwendung rechnergestützter POD-Methoden im SHM-Bereich
Tschöke, Kilian
: Matthies, Gunar (1. Gutachter); Wensch, Jörg (2. Gutachter); Mueller, Inka (3. Gutachter); Schubert, Lars (Betreuer) | Dissertation |
| 2019 | Application of µCT for the determination of total surface area of stents
Saqib, Muhammad; Bernhardt, Ricardo; Kästner, Markus; Beshchasna, Natalia; Cuniberti, Gianaurelio; Opitz, Jörg | Konferenzbeitrag |
| 2019 | Application of empirical hardness models on hardmetals with alternative binders
Vornberger, Anne; Pötschke, Johannes; Mayer, Markus; Michaelis, Alexander | Konferenzbeitrag |
| 2019 | Automatisierung der zerstörungsfreien Prüfung von großen Stahlgussbauteilen
Heuer, Henning | Zeitschriftenaufsatz |
| 2019 | An autonomous flame ionization detector for emission monitoring
Förster, Jan; Kuipers, Winfred J.; Lenz, Christian; Ziesche, Steffen; Bechtold, Franz | Zeitschriftenaufsatz |
| 2019 | Bauteil, das mit ß-Siliciumnitridwerkstoff gebildet ist und ein Verfahren zu seiner Herstellung
Fuchs, Marcel; Herrmann, Mathias; Kaden, Thomas; Wolfrum, Anne-Kathrin | Patent |
| 2019 | Bewertung der Zuverlässigkeit von keramischen Federn für korrosive Umgebungen und hohe Temperaturen
Koplin, C.; Kailer, A.; Stockmann, J.; Beckert, W. | Bericht |
| 2019 | BN-based fiber coatings by wet-chemical coating
Maier, Jonathan; Nöth, Andreas; Schönfeld, Katrin | Konferenzbeitrag |
| 2019 | Boron-doped diamond with improved oxidation resistance
Herrmann, Mathias; Matthey, Björn; Gestrich, Tim | Zeitschriftenaufsatz |
| 2019 | Brazes for extremely high temperatures
Martin, Hans-Peter; Roszeitis, Sven; Matthey, Björn; Herrmann, Marion; Graffé, Marius; Lippmann, Wolfgang; Schmidt, Marcus Peter; Burkhardt, Ulrich; Michaelis, Alexander | Konferenzbeitrag |
| 2019 | Bremseinrichtung für ein Zweirad
Neubert, Holger; Neumeister, Peter | Patent |
| 2019 | Carbon membranes for bio gas upgrading
Richter, Hannes; Reger-Wagner, Norman; Kämnitz, Susanne; Voigt, Ingolf; Lubenau, Udo; Mothes, Raymond | Zeitschriftenaufsatz |
| 2019 | Ceramic additive manufacturing methods applied to sintered glass components with novel properties
Moritz, Tassilo; Schilm, Jochen; Rost, Axel; Schwarzer, Eric; Weingarten, Steven; Scheithauer, Uwe; Wätzig, Katja; Wagner, Dörte; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2019 | Chabazite-type zeolite membranes for effective CO2 separation: The role of hydrophobicity and defect structure
Lee, Minseong; Hong, Sungwon; Kim, Dongjae; Kim, Eunjoo; Lim, Kyunghwan; Jung, Jaechil; Richter, Hannes; Moon, Jongho; Choi, Nakwon; Nam, Jaewook; Choi, Jungkyu | Zeitschriftenaufsatz |
| 2019 | Characterisation of transition metal doped Li+-stabilized Na-beta''-alumina electrolytes
Dirksen, Cornelius; Augustina, Anisa Isabella; Schulz, Matthias; Stelter, Michael | Abstract |
| 2019 | Cleaving silicene-terminated calcium disilicide in the transmission electron microscope
Liao, Zhongquan; Standke, Yvonne; Gluch, Jürgen; Brazda, Petr; Kopecek, Jaromir; Klementova, Mariana; Palatinus, Lukas; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2019 | Co-Electrolysis CFY-Stack Operation and Integration for Carbon Capture and Utilization
Kusnezoff, Mihails; Megel, Stefan; Rix, Christopher; Adam, Paul; Reichelt, Erik; Herz, Gregor; Jahn, Matthias; Trofimenko, Nikolai; Michaelis, Alexander | Konferenzbeitrag |
| 2019 | The combination of minimally invasive electrochemical investigations and FTIR-spectroscopy to analyze atmospheric corrosion product layers on zinc
Langklotz, Ulrike; Babutzka, Martin; Schneider, Michael; Burkert, Andreas | Zeitschriftenaufsatz |
| 2019 | Combined wear and ageing of ceramic-on-ceramic bearings in total hip replacement under edge loading conditions
Al-Hajjar, Mazen; Grémillard, Laurent; Begand, Sabine; Oberbach, Thomas; Hans, Karen; Delfosse, Daniel; Chêvalier, Jérôme; Jennings, Louise M. | Zeitschriftenaufsatz |
| 2019 | Comparison of electrochemical degradation for spray dried and pulse gas dried LiNi0.5Mn1.5O4
Seidel, Matthias; Kugaraj, Muthuraman; Nikolowski, Kristian; Wolter, Mareike; Kinski, Isabel; Jähnert, Thomas; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2019 | Comparison of Nickel and Cobalt Bonded Nanoscaled Hardmetals
Fabijanić, Tamara Aleksandrov; Pötschke, Johannes; Mayer, Markus; Škrinjarić, Irbas; Kurtela, Marin | Konferenzbeitrag |
| 2019 | A comprehensive study on improved power materials for high-temperature thermoelectric generators
Bittner, Michael; Kanas, Nikola; Hinterding, Richard; Steinbach, Frank; Räthel, Jan; Schrade, Matthias; Wiik, Kjell; Einarsrud, Mari-Ann; Feldhoff, Armin | Zeitschriftenaufsatz |
| 2019 | Corrigendum: Iron-Based Fischer-Tropsch Catalysts for Higher Alcohol Synthesis (Chemie Ingenieur Technik, (2018), 90, 5, (713-720), 10.1002/cite.201700154)
Schaller, Max Rudolf; Reichelt, Erik; Jahn, Matthias | Zeitschriftenaufsatz |
| 2019 | Corrosion behavior of anodized AA-6060 depending on the anodizing bath aging
Schneider, Michael; Kremmer, Kerstin | Zeitschriftenaufsatz |
| 2019 | Current Induced Barkhausen Noise Technique
Birkefeld, Claudius; Hillmann, Susanne; Cikalova, Ulana; Funke, Hendrik | Poster |
| 2019 | Degradation von metallischen Kontaktierungskomponenten bei Hochtemperatur-Brennstoffzellen
Folgner, Christoph
: Michaelis, Alexander (Gutachter); Leyens, Christoph (Gutachter); Kusnezoff, Mihails (Betreuer) | Dissertation |
| 2019 | Determining fundamental properties from diffraction: Electric field induced strain and piezoelectric coefficient
Hinterstein, Manuel; Lee, Kai-Yang; Eßlinger, Sophia; Glaum, Julia; Studer, Andrew; Hoffman, Mark; Hoffmann, Michael Johannes | Zeitschriftenaufsatz |
| 2019 | Development of 40 MHz Ultrasonic Transducers via Soft Mold Process
Günther, Paul; Neumeister, Peter; Neubert, Holger; Gebhardt, Sylvia | Zeitschriftenaufsatz |
| 2019 | Development of a 20 MHz annular-array - a balancing act between optimized design and technological opportunities
Juhrig, Andre; Schmidt, Ulrike; Wolf, Mario; Kühnicke, Elfgard; Günther, Paul A.; Gebhardt, Sylvia | Konferenzbeitrag |
| 2019 | Development of a visual inspection system and the corresponding algorithm for the detection and subsequent classification of paint defects on car bodies in the automotive industry
Kieselbach, Kim Katharina; Nöthen, Matthias; Heuer, Henning | Zeitschriftenaufsatz |
| 2019 | Development of the local proton concentration during pulse anodizing
Lämmel, Christoph; Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2019 | Editorial for the Special Issue "Characterization of Nanomaterials: Selected Papers from 6th Dresden Nanoanalysis Symposium"
Zschech, Ehrenfried; Sinclair, Robert; Martins, Rodrigo; Sebastiani, Marco; Sartori, Sabrina | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2019 | Effect of electric load and dual atmosphere on the properties of an alkali containing diopside-based glass sealant for solid oxide cells
Sabato, A.G.; Rost, Axel; Schilm, Jochen; Kusnezoff, Mihails; Salvo, Milena; Chrysanthou, Andreas; Smeacetto, Federico | Zeitschriftenaufsatz |
| 2019 | The effect of Fe as constituent in Ni-base alloys on the oxygen evolution reaction in alkaline solutions at high current densities
Rauscher, Thomas; Bernäcker, Christian Immanuel; Mühle, Uwe; Kieback, Bernd F.; Röntzsch, Lars | Zeitschriftenaufsatz |
| 2019 | Effect of processing on high-velocity water vapor recession behavior of Yb-silicate environmental barrier coatings
Bakan, Emine; Sohn, Yoo Jung; Kunz, Willy; Klemm, Hagen; Vaßen, Robert | Zeitschriftenaufsatz |
| 2019 | Effects of TiO2 doping on Li+-stabilized Na-β"-alumina for energy storage applications
Dirksen, Cornelius; Skadell, Karl; Schulz, Matthias; Stelter, Michael | Zeitschriftenaufsatz |
| 2019 | Einfluss der Herstellungsbedingungen auf die mechanische Stabilität asymmetrischer BSCF-Membranen für die Sauerstoff-Bereitstellung
Hoffmann, Robert
: Rettenmayr, Markus (Gutachter); Meulenberg, Wilhelm Albert (Gutachter); Caro, Jürgen | Dissertation |
| 2019 | Electrodeposited manganese oxide on superhydrophobic nickel-mesh for application in gas diffusion electrode
Bekisch, Artur; Skadell, Karl; Schulz, Matthias; Stelter, Michael | Abstract |
| 2019 | Emergence and Impact of Al2TiO5 in Al2O3-TiO2 APS Coatings
Richter, Alexei; Berger, Lutz-Michael; Conze, Susan; Sohn, Yoo Jung; Vaßen, Robert | Konferenzbeitrag |
| 2019 | Engineering crystalline quasi-two-dimensional polyaniline thin film with enhanced electrical and chemiresistive sensing performances
Zhang, Tao; Qi, Haoyuan; Liao, Zhongquan; Horev, Yehu David; Panes-Ruiz, Luis Antonio; Petkov, Petko S.; Zhang, Zhe; Shivhare, Rishi Ramdas; Zhang, Panpan; Liu, Kejun; Bezugly, Viktor; Liu, Shaohua; Zheng, Zhikun; Mannsfeld, Stefan C.B.; Heine, Thomas; Cuniberti, Gianaurelio; Haick, Hossam; Zschech, Ehrenfried; Kaiser, Ute; Dong, Renhao; Feng, Xinliang | Zeitschriftenaufsatz |
| 2019 | Enhanced performance stability of iridium oxide-based pH sensors fabricated on rough inkjet-printed platinum
Zea, Miguel; Moya, Ana; Fritsch, Marco; Ramon, Eloi; Villa, Rosa; Gabriel, Gemma | Zeitschriftenaufsatz |
| 2019 | Enhancement of sensitivity to delamination in eddy current testing of carbon fiber composites by varying probe geometry
Mizukami, Koichi; Ibrahim, Ahmad Syukri Bin; Ogi, Keiji; Matvieieva, Nataliia; Kharabet, Ievgen I.; Schulze, Martin; Heuer, Henning | Zeitschriftenaufsatz |
| 2019 | Entwicklung keramischer Perowskit-Werkstoffe und Bauelementstrukturen für elektrokalorische Anwendungen
Molin, Christian
: Michaelis, Alexander (Gutachter); Gerlach, Gerald (Gutachter); Gebhardt, Sylvia (Betreuer) | Dissertation |
| 2019 | Entwicklung selbstheilender Materialien zum Korrosionsschutz für Keramiken in Hochtemperaturanwendungen
Kunz, Willy
: Michaelis, Alexander (Gutachter); Vaßen, Robert (Gutachter) | Dissertation |
| 2019 | Erkennung von Krebszellen in Prostata-Biopsien durch die zeitaufgelöste Fluoreszenz-Spektroskopie
Lehmann, Andreas; Schreiber, Luise; Gerich, Carola; Schreiber, Jürgen; Opitz, Jörg | Poster |
| 2019 | Evaluation of a method for micro-defect sealing in ZSM-5 zeolite membranes by chemical vapor deposition of carbon
Simon, Adrian; Richter, Hannes; Reif, Benjamin; Schülein, Marion; Sanwald, Dirk; Schwieger, Wilhelm | Zeitschriftenaufsatz |
| 2019 | Evidence for the AlZn-Oi defect-complex model for magnetron-sputtered aluminum-doped zinc oxide: A combined X-ray absorption near edge spectroscopy, X-ray diffraction and electronic transport study
Bikowski, André; Zajac, Dariusz A.; Vinnichenko, Mykola; Ellmer, Klaus | Zeitschriftenaufsatz |
| 2019 | Experimental and numerical evaluation of a small array of ceramic foam volumetric absorbers
Zaversky, Fritz; Aldaz, Leticia; Sánchez, Marcelino A.D.; Fernández-Reche, Jesús; Füssel, Alexander; Adler, Jörg | Konferenzbeitrag |
| 2019 | An experimental and numerical survey into the potential of hybrid foams
Hohe, Jörg; Beckmann, Carla; Böhme, Wolfgang; Weise, Jörg; Reinfried, Matthias; Luthardt, Fabian; Rapp, Florian; Diemert, Jan | Zeitschriftenaufsatz |
| 2019 | Fast fuel variation and identification of SOFC system changes using online health monitoring tools and fault diagnosis
Subotić, Vanja; Harter, Philipp; Stoeckl, Bernhard; Preininger, Michael; Kusnezoff, Mihails; Lawlor, Vincent; Pofahl, Stefan; Napporn, Teko; Megel, Stefan; Schroettner, Hartmuth; Hochenauer, Christoph | Konferenzbeitrag |
| 2019 | Fast response hydrogel-based plasmonic sensor substrate for the detection of ethanol
Kroh, Christoph; Wuchrer, Roland; Steinke, Nadja; Günther, Margarita; Gerlach, Gerald; Härtling, Thomas | Konferenzbeitrag |
| 2019 | Fertigungstechnologien für Ultraschallwandler im Frequenzbereich zwischen 40 kHz und 40 MHz
Gebhardt, Sylvia; Günther, Paul; Hohlfeld, Kai; Neubert, Holger | Zeitschriftenaufsatz |
| 2019 | Fraunhofer Institute for Ceramic Technologies and Systems. Annual Report 2018/2019
| Jahresbericht |
| 2019 | Fraunhofer-Institut für Keramische Technologien und Systeme. Jahresbericht 2018/2019
| Jahresbericht |
| 2019 | Fully printed zinc oxide electrolyte-gated transistors on paper
Carvalho, José Tiago; Dubceac, Viorel; Grey, Paul; Cunha, Ines; Fortunato, Elvira; Martins, Rodrigo; Clausner, André; Zschech, Ehrenfried; Pereira, Luis | Zeitschriftenaufsatz |
| 2019 | Functional integration approaches via laser powder bed processing
Moritz, Juliane; Seidel, André; Braun, Bernard; Brandão, Ana D.; Pambaguian, Laurent; Köhler, Bernd; Barth, Martin; Riede, Mirko; Lopez, Elena; Brückner, Frank; Leyens, Christoph | Zeitschriftenaufsatz |
| 2019 | Functional Printing of MMIC-Interconnects on LTCC Packages for sub-THz applications
Ihle, Martin; Ziesche, Steffen; Zech, Christian; Baumann, Benjamin | Konferenzbeitrag |
| 2019 | Funktionale Schichten für gassensorische Anwendungen
Dietrich, Stefan
: Michaelis, Alexander (1. Gutachter); Guth, Ulrich (2. Gutachter) | Dissertation |
| 2019 | Fused Filament Fabrication (FFF) of Metal-Ceramic Components
Abel, Johannes; Scheithauer, Uwe; Janics, Thomas; Hampel, Stefan; Cano, Santiago; Müller-Köhn, Axel; Günther, Anne; Kukla, Christian; Moritz, Tassilo | Zeitschriftenaufsatz |
| 2019 | Future AM. Die nächste Generation additiver Fertigungsverfahren
Schleifenbaum, Johannes Henrich; Tenbrock, C.; Emmelmann, Claus; Leyens, Christoph; Brückner, Frank; Michaelis, Alexander | Aufsatz in Buch |
| 2019 | Gewebecharakterisierung mittels fraktalem Fluoreszenzabklingverhalten und optischer Kohärenztomografie
Schreiber, Luise; Lehmann, Andreas; Schreiber, Jürgen; Opitz, Jörg | Poster |
| 2019 | Herstellung von amorphen SiCN-Verbundbauteilen über die spritzgusstechnische Verarbeitung von kohlenstoffkurzfaserverstärkten Polysilazanen
Müller-Köhn, Axel
: Michaelis, Alexander (1. Gutachter); Koch, Dietmar (2. Gutachter) | Dissertation |
| 2019 | High-performance ultrasonic transducers based on PMN-PT single crystals fabricated in 1-3 Piezo-Composite Technology
Herzog, Thomas; Walter, Susan; Lee, Sang-Goo; Lee, Jeong-Ho; Schubert, Frank; Heuer, Henning | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2019 | High-Temperature packaging for sensors
Rebenklau, Lars; Gierth, Paul; Barth, Henry | Konferenzbeitrag |
| 2019 | How to measure flexibility - performance indicators for demand driven power generation from biogas plants
Dotzauer, Martin; Pfeiffer, Diana; Lauer, Markus; Pohl, Marcel; Mauky, Eric; Bär, Katharina; Sonnleitner, Matthias; Zörner, Wilfried; Hudde, Jessica; Schwarz, Björn; Faßauer, Burkhardt; Dahmen, Markus; Rieke, Christian; Herbert, Johannes; Thrän, Daniela | Zeitschriftenaufsatz |
| 2019 | HTCC-Multilayerbasierte Ionensensitive Sensoren für die Wasseranalyse
Feller, Claudia; Partsch, Uwe; Körner, Stefan | Konferenzbeitrag |
| 2019 | Hydrogel-based plasmonic sensor substrate for the detection of ethanol
Kroh, Christoph; Wuchrer, Roland; Steinke, Nadja; Günther, Margarita; Gerlach, Gerald; Härtling, Thomas | Zeitschriftenaufsatz |
| 2019 | Immobilization of detonation nanodiamonds on macroscopic surfaces
Balakin, Sascha; Dennison, Nicholas R.; Klemmed, Benjamin; Spohn, Juliane; Cuniberti, Gianaurelio; Römhildt, Lotta; Opitz, Jörg | Zeitschriftenaufsatz |
| 2019 | Impact of Al2O3-40 wt.% TiO2 Feedstock Powder Characteristics on the Sprayability, Microstructure and Mechanical Properties of Plasma Sprayed Coatings
Richter, Alexei; Berger, Lutz-Michael; Sohn, Yoo Jung; Conze, Susan; Sempf, Kerstin; Vaßen, Robert | Zeitschriftenaufsatz |
| 2019 | Impact of extrusion parameters on the mechanical performance of tubular BSCF-supports for asymmetric oxygen transporting membranes
Hoffmann, Robert; Pippardt, Ute; Kriegel, Ralf | Zeitschriftenaufsatz |
| 2019 | Impact of mechanical strain on 22 nm FDSOI device performance using nanoindentation
Schlipf, Simon; Clausner, André; Paul, Jens; Capecchi, Simone; Kurz, G.; Zschech, Ehrenfried | Konferenzbeitrag |
| 2019 | Impact of sintering temperature on permeation and long-term development of support structure and stability for asymmetric oxygen transporting BSCF membranes
Hoffmann, Robert; Pippardt, Ute; Kriegel, Ralf | Zeitschriftenaufsatz |
| 2019 | Improved SH0 Guided Wave Transducers Based on Piezoelectric Fiber Patches
Kim, Yongtak; Gaul, Tobias; Köhler, Bernd | Zeitschriftenaufsatz |
| 2019 | In situ neutron diffraction studies on poling of the hard PZT ceramic PIC181
Eßlinger, Sophia; Neumeister, Peter; Schönecker, Andreas; Hoffman, Mark John; Studer, Andrew; Hinterstein, Manuel | Zeitschriftenaufsatz |
| 2019 | In-situ processing and characterization of Fe-TiCN composite produced via enhanced carbonitrothermic reduction of low grade ilmenite concentrate
Mojisola, Tajudeen; Ramakokovhu, Munyadziwa Mercy; Räthel, Jan; Olubambi, Peter Apata; Matizamhuka, Wallace R. | Zeitschriftenaufsatz |
| 2019 | In-situ synthesis and characterization of Fe – TiC based cermet produced from enhanced carbothermally reduced ilmenite
Mojisola, Tajudeen; Ramakokovhu, Mercy Munyadziwa; Räthel, Jan; Olubambi, Peter Apata; Matizamhuka, Wallace R. | Zeitschriftenaufsatz |
| 2019 | Influence of ceramic granule properties on die filling behaviour
Glöß, Bianca; Fries, Manfred | Zeitschriftenaufsatz |
| 2019 | Influence of microstructure on hardness and thermal conductivity of hardmetals
Vornberger, Anne; Pötschke, Johannes; Gestrich, Tim; Herrmann, Mathias | Vortrag |
| 2019 | An insight into anodic dissolution processes of carbides obtained by product analysis
Simunkova, Lenka; Schneider, Michael; Michaelis, Alexander | Konferenzbeitrag |
| 2019 | Integration of piezoceramic composites into structural components: Effect on the polarisation state and polarisability
Hohlfeld, Kai; Eßlinger, Sophia; Eydam, Agnes; Winkler, Anja; Weber, Tony; Gude, Maik; Modler, Niels; Gerlach, Gerald; Suchaneck, Gunnar; Michaelis, Alexander; Schönecker, Andreas; Gebhardt, Andreas; Neumeister, Peter | Zeitschriftenaufsatz |
| 2019 | Integration of sensory-diagnostic and actuator therapeutic functions in implants
Lausch, Holger; Töppel, Thomas | Aufsatz in Buch |
| 2019 | Interaction of fiber matrix bonding in SiC/SiC ceramic matrix composites
Schönfeld, Katrin; Klemm, Hagen | Zeitschriftenaufsatz |
| 2019 | Investigation and optimization of Ni/NaCl granules for Na-NiCl2 high temperature batteries
Schüßler, Benjamin; Dirksen, Cornelius; Schulz, Matthias; Stelter, Michael | Abstract |
| 2019 | Investigation of the oxide film formed on solid-state sintered silicon carbide ceramics at high anodic potentials
Schneider, Michael; Simunkova, Lenka; Michaelis, Alexander; Noeske, Michael; Aniol, Jonas; Thiel, Karsten | Konferenzbeitrag |
| 2019 | Investigations on the effective electric loads in blended insertion electrodes for lithium-ion batteries
Liebmann, Tobias; Heubner, Christian; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2019 | Investigations on the reversible heat generation rates of blended Li-insertion electrodes
Liebmann, Tobias; Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2019 | Joining and mechanical testing of oxide/oxide (Nextel™ 610/alumina-zirconia) ceramic composites
Akram, Muhammad Yasir; Casalegno, Valentina; Ferraris, Monica; Puchas, Georg; Krenkel, Walter; Roszeitis, Sven | Zeitschriftenaufsatz |
| 2019 | Keramische Membranen in der Membrandestillation
Schnittger, Johann; Weyd, Marcus W.; Voigt, Ingolf; Lerch, André | Zeitschriftenaufsatz |
| 2019 | Keramische Multilagenspulen zur Anwendung in der Hochtemperaturelektronik
Bartsch, Heike; Müller, Jens; Capraro, Beate; Schabbel, Dirk; Reimann, Timmy; Töpfer, Jörg; Grund, Steffen | Konferenzbeitrag |
| 2019 | Kompakte Abfrageeinheit auf Basis einer Doppelphotodiode für die spektraloptische Sensorik
Wuchrer, Roland
: Härtling, Thomas (Betreuer); Gerlach, Gerald (Betreuer, Hrsg.) | Dissertation |
| 2019 | Laser speckle photometry - Optical sensor systems for condition and process monitoring
Chen, Lili; Cikalova, Ulana; Bendjus, Beatrice; Gommlich, Andreas; Sudip, Shohag Roy; Schott, Carolin; Steingroewer, Juliane; Belting, Matthias; Kleszczynski, Stefan | Zeitschriftenaufsatz |
| 2019 | Lattice Analysis by Synchrotron Powder Diffraction on High Voltage Spinel LiNi0.5Mn1.5O4
Seidel, Matthias; Nikolowski, Kristian; Auer, Henry; Kinski, Isabel; Wolter, Mareike; Mikhailova, Daria; Maletti, Sebastian; Michaelis, Alexander | Abstract |
| 2019 | Lattice Analysis by Synchrotron Powder Diffraction on High Voltage Spinel LNMO
Seidel, Matthias; Nikolowski, Kristian; Auer, Henry; Kinski, Isabel; Wolter, Mareike; Mikhailova, Daria; Maletti, Sebastian; Michaelis, Alexander | Poster |
| 2019 | LLZO separator sheets manufactured by a tape casting process and their electrochemical characterization
Hüttl, Juliane; Arnold, Michael; Nikolowski, Kristian; Görne, Arno Ludwig; Wolter, Mareike; Michaelis, Alexander | Poster |
| 2019 | Messsensor zum Bestimmen von Eigenspannungen an oder in einem zu untersuchenden Bauteil
Brosius, David Maximilian; Cikalova, Ulana; Funke, Hendrik; Hillmann, Susanne | Patent |
| 2019 | Methode für den Vorhalt von inhomogenen Schwindungen im Entwurfsprozess von LTCC-Mikrosystemen
Lenz, Christian; Strach, Nicole; Ziesche, Steffen; Partsch, Uwe; Michaelis, Alexander | Konferenzbeitrag |
| 2019 | Methodology for correlation of porosity and mechanical properties of silver sintered joints in electronics
Metasch, René; Röllig, Mike; Knoch, Philip; Weinmann, Christian; Meier, Karsten | Konferenzbeitrag |
| 2019 | Microstructural control of a SSZ-13 zeolite film via rapid thermal processing
Kim, Jinseong; Jang, Eunhee; Hong, Sungwon; Kim, Dongjae; Kim, Eunjoo; Richter, Hannes; Simon, Adrian; Choi, Nakwon; Korelskiy, Danil; Fouladvand, Shahpar; Nam, Jaewook; Choi, Jungkyu | Zeitschriftenaufsatz |
| 2019 | Miniaturisiertes, batterieloses Sensorsystem zur Steckzyklenzählung an Verbindungskomponenten
Augustin, Jörn; Klesse, Thomas; Neumeister, Peter; Oemus, Martin; Schubert, Lars; Schiefelbein, Frank-Peter | Konferenzbeitrag |
| 2019 | Model-based examination of an optimal use of carbon-based energy carriers in an integrated steel mill through integration of a direct reduction plant
Müller, Nils; Herz, Gregor; Reichelt, Erik; Jahn, Matthias | Konferenzbeitrag |
| 2019 | Modeling and sizing of a TEG with half-heusler TE legs for reducing fuel consumption in a heavy duty vehicle
Contet, A.; Lhomme, C.; Zuckermann, D.; Fey, A.; Rouaud, C.; Cimen, T.; Rabanser, P.; Rost, A.; Trache, M.; Feng, B. | Bericht |
| 2019 | Molecular engineering of conjugated acetylenic polymers for efficient cocatalyst-free photoelectrochemical water reduction
Sun, Hanjun; Öner, Ibrahim Halil; Wang, Tao; Zhang, Tao; Selyshchev, Oleksandr; Neumann, Christof; Fu, Yubin; Liao, Zhongquan; Xu, Shunqi; Hou, Yang; Turchanin, Andrey; Zahn, Dietrich R.T.; Zschech, Ehrenfried; Weidinger, Inez M.; Zhang, Jian; Feng, Xinliang | Zeitschriftenaufsatz |
| 2019 | Monitoring of compressor operations - A machine learning approach
Holstein, Peter; Moeck, Steffen; Tschöpe, Constanze; Duckhorn, Frank; Kolbe, Peter; Hennecke, Michael | Konferenzbeitrag |
| 2019 | Monolithic Ceramic IR-Emitter in Multilayer Technology
Goldberg, Adrian; Manhica, Birgit; Ziesche, Steffen | Konferenzbeitrag |
| 2019 | Multi-material Ceramic-Based Components - Additive Manufacturing of Black-and-white Zirconia Components by Thermoplastic 3D-Printing (CerAM - T3DP)
Weingarten, Steven; Scheithauer, Uwe; Johne, Robert; Abel, Johannes; Schwarzer, Eric; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2019 | Multi-sensor high-frequency eddy current depth detection in carbon fiber reinforced polymers
Matvieieva, Nataliia; Schulze, Martin H.; Chen, Lili; Patsora, Iryna V.; Heuer, Henning | Konferenzbeitrag |
| 2019 | Multimaterial components by material extrusion-fused filament fabrication (ME-FFF) - Production of an infrared heater
Kukla, Christian; Cano, Santiago; Moritz, Tassilo; Müller-Köhn, Axel; Courtney, P.; Hampel, Stefan; Holzer, Clemens | Zeitschriftenaufsatz |
| 2019 | Neue hoch verschleißfeste Metallguss-Keramik-Verbundwerkstoffe
Standke, Gisela | Zeitschriftenaufsatz |
| 2019 | Non-destructive investigations of pore morphology of micropore carbon materials
Stec, Jakub; Tarasiuk, Jacek; Nagy, Stanislaw; Smulski, Rafal; Gluch, Jürgen; Filipek, Robert | Zeitschriftenaufsatz |
| 2019 | Non-destructive weld inspection during the welding process - possibilities and limitations of an inline monitoring approach
Schubert, Frank; Bendjus, Beatrice; Cikalova, Ulana; Stephan, Mareike; Hipp, Raffael; Schulze, Eberhard; Barth, Martin; Bor, Zsolt; Heuer, Henning | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2019 | A novel model for pyro-electro-catalytic hydrogen production in pure water
Schlechtweg, Julian; Raufeisen, Sascha; Stelter, Michael; Bräutigam, Patrick | Zeitschriftenaufsatz |
| 2019 | Numerical and experimental study of the spatial stress distribution on the cornea surface during a non-contact tonometry examination
Münch, Stefan; Röllig, Mike; Spörl, Eberhard; Balzani, Daniel | Zeitschriftenaufsatz |
| 2019 | Numerical study on the influence of material models for tin-based solder alloys on reliability statements
Metasch, René; Schwerz, Robert; Meier, K.; Röllig, Mike | Konferenzbeitrag |
| 2019 | On-turbine multisensors based on hybrid ceramic manufacturing technology
Ziesche, Steffen; Goldberg, Adrian; Partsch, Uwe; Kappert, Holger; Kind, Heidrun; Aden, Mirko; Naumann, Falk | Konferenzbeitrag, Zeitschriftenaufsatz |
| 2019 | Onlinefähige Signalauswertung für spektraloptische Sensoren mit einer Doppelphotodiode
Wuchrer, Roland; Härtling, Thomas; Gerlach, Gerald | Zeitschriftenaufsatz |
| 2019 | Operation experience with a novel highly efficient micro-scale CHP system based on fuel-flexible gasification and a SOFC
Obernberger, Ingwald; Brunner, T.; Ramerstorfer, C.; Kerschbaum, M.; Aravind, P.V.; Makkus, R.; Megel, Stefan; Hauth, Martin; Weissensteiner, S. | Konferenzbeitrag |
| 2019 | Operation of a SOFC CHP system with wood gas from a fixed-bed updraft gasifier
Weißensteiner, Stefan; Hauth, Martin; Seidl, Michael; Soukup, Nikolaus; Sallai, Christopher; Obernberger, Ingwald; Brunner, Thomas; Ramerstorfer, Christian; Megel, Stefan; Schnetter, Jens | Konferenzbeitrag |
| 2019 | Optical and Electrical Signal Transduction by Nanoplasmonic Structures for Emerging Sensing and Device Applications
Lee, Jihye
: Yeo, Jong-Souk (Thesis Supervisor); Kwon, Jang-Yeon (Thesis Committee Member); Kim, Jiwon (Thesis Committee Member); Altug, Hatice (Thesis Committee Member); Opitz, Jörg (Thesis Committee Member) | Dissertation |
| 2019 | Optimization of selectivity towards higher alcohols for iron-based Fischer-Tropsch catalysts
Wolke, Florian; Schaller, Max Rudolf; Dehmelt, Tom; Reichelt, Erik; Jahn, Matthias | Konferenzbeitrag |
| 2019 | Plasmonic sensor for on-site detection of diclofenac molecules
Steinke, Nadja; Döring, Sarah; Wuchrer, Roland; Kroh, Christoph; Gerlach, Gerald; Härtling, Thomas | Zeitschriftenaufsatz |
| 2019 | Polymer brushes on hexagonal boron nitride
Sheng, Wenbo; Amin, Ihsan; Neumann, Christof; Dong, Renhao; Zhang, Tao; Wegener, Erik; Chen, Wei-Liang; Förster, Paul; Tran, Hai Quang; Löffler, Markus; Winter, Andreas; Rodriguez, Raul D.; Zschech, Ehrenfried; Ober, Christopher K.; Feng, Xinliang; Turchanin, Andrey; Jordan, Rainer | Zeitschriftenaufsatz |
| 2019 | Potentials and challenges of additive manufacturing technologies for heat exchanger
Scheithauer, Uwe; Kordaß, Richard; Noack, Kevin; Eichenauer, Martin F.; Hartmann, Mathias; Abel, Johannes; Ganzer, Gregor; Lordick, Daniel | Aufsatz in Buch |
| 2019 | Powder based and suspension based additive manufacturing of hardmetal
Berger, Christian; Pötschke, Johannes; Abel, Johannes; Richter, Hans-Jürgen; Scheithauer, Uwe; Weingarten, Steven; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2019 | PrintPOWER - Paste systems for multifunctional copper power modules
Reinhardt, Kathrin; Körner, Stefan; Partsch, Uwe | Konferenzbeitrag |
| 2019 | Process development for additive manufacturing of functionally graded alumina toughened zirconia components intended for medical implant application
Schwarzer, Eric; Holtzhausen, Stefan; Scheithauer, Uwe; Ortmann, Claudia; Oberbach, Thomas; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2019 | Quantitative analysis of BMP-2 derived peptides covalently grafted to oxidized detonation nanodiamonds
Balakin, Sascha; Missirlis, Athanassios; Klemmed, Benjamin; Lee, Jihye; Opitz, Jörg; Yeo, Jong-Souk; Cuniberti, Gianaurelio | Zeitschriftenaufsatz |
| 2019 | Quantitative elucidation of the elusive role of defects in polycrystalline MFI zeolite membranes on xylene separation performance
Hong, Sungwon; Kim, Dongjae; Richter, Hannes; Moon, Jong Ho; Choi, Nakwon; Nam, Jaewook; Choi, Jungkyu | Zeitschriftenaufsatz |
| 2019 | Rapid screening of CO oxidation catalysts using optical calorimetry
Wegner, Karl; Wöllner, Michelle; Zippel, Rene; Medicus, Maximilian; Schade, Elke; Grothe, Julia; Kaskel, Stefan | Zeitschriftenaufsatz |
| 2019 | Report on SOP for dispersing nanomaterials in water and report on round robin test
Potthoff, Annegret; Unger, Wolfgang | Bericht |
| 2019 | Scale-up of ceramic nanofiltration membranes to meet large scale applications
Voigt, Ingolf; Richter, Hannes; Stahn, Michael; Weyd, Marcus; Puhlfürß, Petra; Prehn, Volker; Günther, Christiane | Zeitschriftenaufsatz |
| 2019 | A semiconducting layered metal-organic framework magnet
Yang, Chongqing; Dong, Renhao; Wang, Mao; Petkov, Petko S.; Zhang, Zhitao; Wang, Mingchao; Han, Peng; Ballabio, Marco; Bräuninger, Sascha A.; Liao, Zhongquan; Zhang, Jichao; Schwotzer, Friedrich; Zschech, Ehrenfried; Klauss, Hans-Henning; Canovas, Enrique; Kaskel, Stefan; Bonn, Mischa; Zhou, Shengqiang; Heine, Thomas; Feng, Xinliang | Zeitschriftenaufsatz |
| 2019 | SHM using guided waves - Recent activities and advances in Germany
Mueller, Inka; Moll, Jochen; Tschöke, Kilian; Prager, Jens; Kexel, Christian; Schubert, Lars; Lugovtsova, Yevgeniya; Bach, Martin; Vogt, Thomas | Konferenzbeitrag |
| 2019 | Simulationsgestützte Modellierung der elastischen Eigenschaften mikrorissbehafteter Materialien und deren nichtlineare Wechselwirkung mit geführten Wellen
Rjelka, Marek
: Köhler, Bernd (Betreuer); Kühnicke, Elfgard (Betreuender Hochschullehrer); Mayer, Andreas (Gutachter) | Dissertation |
| 2019 | Sol-gel method for synthesis of Li+-stabilized Na-β”-alumina for solid electrolytes in sodium-based batteries
Augustina, Anisa Isabella; Skadell, Karl; Dirksen, Cornelius; Kusumocahyo, Samuel P. | Konferenzbeitrag |
| 2019 | Stress Characterization of Ceramic Substrates by Laser Speckle Photometry
Chen, Lili; Cikalova, Ulana; Münch, Stefan; Röllig, Mike; Bendjus, Beatrice | Konferenzbeitrag |
| 2019 | Structural features and nitrogen positions in titanium oxynitride films grown in plasma of magnetron discharge
Pichugin, Vladimir F.; Pustovalova, Alla A.; Evdokimov, Kirill E.; Konishchev, M.E.; Kuzmin, Oleg S.; Boytsova, E.L.; Beshchasna, Natalia; Ficai, Anton; Aubakirova, D.M.; Sun, Zhilei | Konferenzbeitrag |
| 2019 | Surface evaluation of titanium oxynitride coatings used for developing layered cardiovascular stents
Beshchasna, Nataliia; Kwan Ho, Au Yeung; Saqib, Muhammad; Kraśkiewicz, Honorata; Wasyluk, Łukasz; Kuzmin, Oleg; Duta, Oana; Ficai, Denisa; Trusca, Roxana; Ficai, Anton; Pichugin, Vladimir F.; Opitz, Jörg; Andronescu, Ecaterina | Zeitschriftenaufsatz |
| 2019 | Techno-economic analysis of a highly integrated Power-to-liquid process
Rix, Christopher; Herz, Gregor; Reichelt, Erik; Jahn, Matthias | Konferenzbeitrag |
| 2019 | Thermoplastic 3D Printing of Hardmetals
Pötschke, Johannes; Weingarten, Steven; Scheithauer, Uwe; Mayer, Markus | Konferenzbeitrag |
| 2019 | Three-dimensional structural comparison of tantalum glancing angle deposition thin films by FIB-SEM
Ott, Tobias; Roldan, Diego; Redenbach, Claudia; Schladitz, Katja; Godehardt, Michael; Höhn, Sören | Zeitschriftenaufsatz |
| 2019 | Through interface optimization to new generation of robust electrolyte supported cell with high power density
Trofimenko, Nikolai; Kusnezoff, Mihails; Mosch, Sindy; Michaelis, Alexander | Konferenzbeitrag |
| 2019 | Towards Actuation Improvement of Low-profile Piezo Fibre Composites by Notched Electrodes
Hohlfeld, Kai; Neumeister, Peter; Michaelis, Alexander; Gebhardt, Sylvia | Zeitschriftenaufsatz |
| 2019 | Towards reconfigurable electronics: Silicidation of top-down fabricated silicon nanowires
Khan, Muhammad Bilal; Deb, Dipjyoti; Kerbusch, Jochen; Fuchs, Florian; Löffler, Markus; Banerjee, Sayanti; Mühle, Uwe; Weber, Walter Michael; Gemming, Sibylle; Schuster, Jörg; Erbe, Artur; Georgiev, Yordan M. | Zeitschriftenaufsatz |
| 2019 | Treatment of oily and salty mining water by ceramic nanofiltration membranes
Voigt, Ingolf; Richter, Hannes; Weyd, Marcus W.; Milew, Kerstin; Haseneder, Roland; Günther, Christiane; Prehn, Volker | Zeitschriftenaufsatz |
| 2019 | Tungsten carbide nanoparticles show a broad spectrum virucidal activity against enveloped and nonenveloped model viruses using a guideline-standardized in vitro test
Pfaff, Florian; Glück, Brigitte; Hoyer, Thomas; Rohländer, David G.; Sauerbrei, Andreas; Zell, Roland | Zeitschriftenaufsatz |
| 2019 | Ultrasonic dual element probes revisited - complex wave phenomena as a basis for transducer design and optimization
Schubert, Frank; Herzog, Thomas; Walter, Susan; Heuer, Henning | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2019 | Understanding Thickness and Porosity Effects on the Electrochemical Performance of LiNi0.6Co0.2Mn0.2O2-based Cathodes for High Energy Li-Ion Batteries
Heubner, Christian; Nickol, Alexander; Seeba, Jann; Reuber, Sebastian; Junker, Nils; Wolter, Mareike; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2019 | Unlimited colors - Glass powder injection moulding
Mannschatz, Anne; Rost, Axel; Müller-Köhn, Axel; Schilm, Jochen; Moritz, Tassilo; Jegust, Stephan; Witzleben, Moritz von | Zeitschriftenaufsatz |
| 2019 | Using of zeolite NaA membranes for improved glycol dewatering in a pilot plant for natural gas drying
Lubenau, U.; Mothes, R.; Worch, D.; Kühnert, J.T.; Weyd, M.; Richter, H.; Simon, L.; Neuhaus, G. | Konferenzbeitrag |
| 2019 | Vorrichtung und Verfahren zur Herstellung eines Zeoliths
Hoffmann, Claudia; Ommer, Matthias; Philipp, Janet; Richter, Hannes | Patent |
| 2019 | Vorrichtung zur Bestimmung der Ermüdung von Proben, die einer thermo-mechanischen Wechselbeanspruchung ausgesetzt werden
Metasch, René; Röllig, Mike; Naumann, Uwe; Kaufmann, Rainer; Wiesenhütter, Felix | Patent |
| 2019 | Wavelength dependent laser material processing of ceramic materials
Polenz, Stefan; Seidel, André; Moritz, Juliane; Kunz, Willy; Riede, Mirko; Lopez, Elena; Brückner, Frank; Leyens, Christoph | Zeitschriftenaufsatz |
| 2019 | Wellenlängenabhängige Herstellung keramischer Werkstoffe für Luft- und Raumfahrtanwendungen mittels Lasertechnologie
Polenz, Stefan; Kunz, Willy; Rößler, Marco; Lopez, Elena; Brückner, Frank; Leyens, Christoph | Konferenzbeitrag |
| 2019 | X-ray characterization of morphology and structure of materials at multiple length scales
Zschech, Ehrenfried | Abstract |
| 2019 | Zerstörungsfreie Prüfung metallischer Überlappschweißverbindungen in Lithium-Ionen-Batterien mit Fokus auf die optisch angeregte Infrarotthermografie
Just, Philipp
: Meyendorf, Norbert (Betreuer, Hochschullehrer); Mücklich, Silke (Gutachter) | Dissertation |
| 2019 | Zu belüftende Extrusionsvorrichtung zur Herstellung eines mit einem Boden verschlossenen Keramikrohres
Hofacker, Martin; Kiesel, Lutz | Patent |
| 2019 | Zusammenhänge zwischen rheologischen Eigenschaften und der Abscheidbarkeit keramischer Suspensionen
Reinhardt, Kathrin
: Michaelis, Alexander (Gutachter); Feller, Jörg (Gutachter) | Dissertation |
| 2019 | Zustandsüberwachung an Rotorblättern von Windkraftanlagen mittels Schallemissionsanalyse
Schubert, Lars; Schulze, Eberhard; Weihnacht, Bianca; Henker, Tobias; Frankenstein, Bernd | Konferenzbeitrag |
| 2018 | 30 nm X-ray focusing correlates oscillatory stress, texture and structural defect gradients across multilayered TiN-SiOx thin film
Keckes, Jozef; Daniel, Rostislav; Todt, Juraj; Zalesak, Jakub; Sartory, Bernhard; Braun, Stefan; Gluch, Jürgen; Rosenthal, Martin; Burghammer, Manfred; Mitterer, C.; Niese, S.; Kubec, Adam | Zeitschriftenaufsatz |
| 2018 | 3D Multilayered Ceramics - harsh environment interposer technologies expand into 3rd dimension
Ziesche, Steffen; Lenz, Christian; Müller-Köhn, Axel; Scheithauer, Uwe; Partsch, Uwe | Konferenzbeitrag |
| 2018 | 3D-cathode design with foam-like aluminum current collector for high energy density lithium-ion batteries
Fritsch, Marco; Standke, Gisela; Heubner, Christian; Langklotz, Ulrike; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | 57Fe Mössbauer study into oxygen vacancy disorder in (Ba0.5Sr0.5)(Co0.8Fe0.2)O3−δ
Gaczynski, Piotr; Harpf, Anja; Böer, Jürgen; Kircheisen, Robert; Kriegel, Ralf; Becker, Klaus-Dieter | Zeitschriftenaufsatz |
| 2018 | Additive Manufacturing of ceramic heat exchanger. Opportunities and limits of the Lithography-based Ceramic Manufacturing (LCM)
Scheithauer, Uwe; Schwarzer, Eric; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | Advanced methods in NDE using machine learning approaches
Wunderlich, Christian; Tschöpe, Constanze; Duckhorn, Frank | Konferenzbeitrag |
| 2018 | Analysis of 28 nm SRAM cell stability under mechanical load applied by nanoindentation
Clausner, André; Schlipf, Simon; Kurz, G.; Otto, M.; Paul, J.; Giering, Kay-Uwe; Warmuth, Jens; Lange, André; Jancke, Roland; Aal, A.; Rosenkranz, Rüdiger; Gall, Martin; Zschech, Ehrenfried | Konferenzbeitrag |
| 2018 | Analysis of electromigration-induced backflow stresses in Cu(Mn) interconnects using high statistical sampling
Kraatz, Matthias; Sander, Christoph; Clausner, André; Hauschildt, M.; Standke, Yvonne; Gall, Martin; Zschech, Ehrenfried | Konferenzbeitrag |
| 2018 | Analysis of the 3D draping behavior of carbon fiber non-crimp fabrics with eddy current technique
Bardl, Georg; Nocke, Andreas; Hübner, Matthias; Gereke, Thomas; Pooch, Matthias; Schulze, Martin; Heuer, Henning; Schiller, Marko; Kupke, Richard; Klein, Marcus; Cherif, Chokri | Zeitschriftenaufsatz |
| 2018 | Anode für eine elektrochemische Zelle sowie ein Verfahren zur Herstellung einer elektrochemischen Zelle mit einer solchen Anode
Kusnezoff, Mihails; Trofimenko, Nikolai | Patent |
| 2018 | Automatisierte zerstörungsfreie Prüfung des Füllgrades von Falzverklebungen mittels Phased Array Ultraschall
Klausing, Maximilian; Cusenza, Salvatore; Heuer, Henning | Konferenzbeitrag |
| 2018 | Ein autonomer Flammenionisationsdetektor zur Emissionsüberwachung
Förster, Jan; Koch, Christian; Kuipers, Winfred; Lenz, Christian; Ziesche, Steffen | Konferenzbeitrag |
| 2018 | BaZrxTi1-xO3 epitaxial thin films for electrocaloric investigations
Engelhardt, Stefan; Molin, Christian; Gebhardt, Sylvia; Fähler, Sebastian; Nielsch, Kornelius; Hühne, Ruben | Zeitschriftenaufsatz |
| 2018 | Beiträge zur chemisch-biologischen Oberflächenmodifikation von Nanodiamanten aus der Detonationssynthese
Pohl, Andrea
: Bley, Thomas (Gutachter); Krueger, Anke (Gutachter); Opitz, Jörg (Betreuer) | Dissertation |
| 2018 | Berechnung von Laufzeit- und Amplitudenverteilung durch simultane Lösung der Eikonal- und Transportgleichung mittels einer adaptierten Fast-Marching-Methode
Neubeck, Robert; Buske, Stefan; Schubert, Lars | Vortrag |
| 2018 | Binding energy referencing for XPS in alkali metal-based battery materials research (II): Application to complex composite electrodes
Oswald, Steffen; Thoss, Franziska; Zier, Martin; Hoffmann, Martin; Jaumann, Tony; Herklotz, Markus; Nikolowski, Kristian; Scheiba, Frieder; Kohl, Michael; Giebeler, Lars; Mikhailova, Daria; Ehrenberg, Helmut | Zeitschriftenaufsatz |
| 2018 | Biomechanical, biochemical, and cell biological evaluation of different collagen scaffolds for tendon augmentation
Gabler, Carolin; Spohn, Juliane; Tischer, Thomas; Bader, Rainer | Zeitschriftenaufsatz |
| 2018 | CerAMfacturing. Development of ceramic and multi-material components by additive manufacturing methods for personalized medical products
Scheithauer, Uwe; Johne, Robert; Weingarten, Steven; Schwarzer, Eric; Abel, Johannes; Müller-Köhn, Axel; Günther, Anne; Moritz, Tassilo | Zeitschriftenaufsatz |
| 2018 | Ceramic-supported thin film composite membrane for organic solvent nanofiltration
Xia, Lingling; Ren, Jian; Weyd, Marcus; McCutcheon, Jeffrey R. | Zeitschriftenaufsatz |
| 2018 | Characterization of spatial distribution of electrolyte in molten carbonate fuel cell cathodes
Wejrzanowski, Tomasz; Gluch, Jürgen; Ibrahim, Samih Haj; Cwieka, Karol; Milewski, Jaroslaw; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2018 | CO2 Emission Reduction Potential in the Steel Industry by Integration of a Direct Reduction Process into Existing Steel Mills
Müller, Nils; Herz, Gregor; Reichelt, Erik; Jahn, Matthias | Konferenzbeitrag |
| 2018 | Cobalt-based metal-organic framework nanoarrays as bifunctional oxygen electrocatalysts for rechargeable Zn-air batteries
Chen, Guangbo; Zhang, Jian; Wang, Faxing; Wang, Lanlan; Liao, Zhongquan; Zschech, Ehrenfried; Müllen, Klaus; Feng, Xinliang | Zeitschriftenaufsatz |
| 2018 | A cognitive user interface for a multi-modal human-machine interaction
Tschöpe, Constanze; Duckhorn, Frank; Huber, Markus; Meyer, Werner; Wolff, Matthias | Konferenzbeitrag |
| 2018 | Combination of soft X-ray microscopy with in-situ mechanical testing to image crack propagation in microchips
Kutukova, Kristina; Liao, Zhongquan; Werner, Stephan; Guttmann, Peter; Standke, Yvonne; Gluch, Jürgen; Schneider, Gerd; Zschech, Ehrenfried | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2018 | Compact LTCC Packaging and Printing Technologies for Sub-THz Modules
Ihle, Martin; Ziesche, Steffen; Zech, Christian; Baumann, Benjamin | Konferenzbeitrag |
| 2018 | Comparative study of corrosion performance of HVOF-sprayed coatings produced using conventional and suspension WC-Co feedstock
Ahmed, Rehan R.; Vourlias, George; Algoburi, A.; Vogiatzis, C.; Chaliampalias, D.; Skolianos, S.; Berger, Lutz-Michael; Paul, S.; Faisal, Nadimul; Toma, Filofteia-Laura; Al-Anazi, Nayef; Goosen, M.F.A. | Zeitschriftenaufsatz |
| 2018 | Comparison of chronoamperometric response and rate-performance of porous insertion electrodes: Towards an accelerated rate capability test
Heubner, Christian; Lämmel, Christoph; Nickol, Alexander; Liebmann, Tobias; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | A continuum model for sintering processes incorporating elasticity effects
Stark, Sebastian; Neumeister, Peter | Zeitschriftenaufsatz |
| 2018 | Copper-surface-mediated synthesis of acetylenic carbon-rich nanofibers for active metal-free photocathodes
Zhang, Tao; Hou, Yang; Dzhagan, Volodymyr M.; Liao, Zhongquan; Chai, Guoliang; Löffler, Markus; Olianas, Davide; Milani, Alberto; Xu, Shunqi; Tommasini, Matteo; Zahn, Dietrich R.T.; Zheng, Zhikun; Zschech, Ehrenfried; Jordan, Rainer Andreas; Feng, Xinliang | Zeitschriftenaufsatz |
| 2018 | A coronene-based semiconducting two-dimensional metal-organic framework with ferromagnetic behavior
Dong, Renhao; Zhang, Zhitao; Tranca, Diana C.; Zhou, Shengqiang; Wang, Mingchao; Adler, Peter; Liao, Zhongquan; Liu, Feng; Sun, Yan; Shi, Wujun; Zhang, Zhe; Zschech, Ehrenfried; Mannsfeld, Stefan C.B.; Felser, Claudia; Feng, Xinliang | Zeitschriftenaufsatz |
| 2018 | Corrosion resistance of silicon-infiltrated silicon carbide (SiSiC)
Striegler, Maria; Matthey, Björn; Mühle, Uwe; Michaelis, Alexander; Herrmann, Mathias | Zeitschriftenaufsatz |
| 2018 | Data-driven fatigue crack quantification and prognosis using nonlinear ultrasonic modulation
Lim, Hyung Jin; Sohn, Hoon; Kim, Yongtak | Zeitschriftenaufsatz |
| 2018 | Deconvolution of cyclic voltammograms of blended lithium insertion compounds by using a model-like blend electrode
Heubner, Christian; Liebmann, Tobias; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | Defect detection during laser welding by Laser Speckle Photometry
Cikalova, Ulana; Bendjus, Beatrice; Stüwe, Tobias; Reyes de Acosta, Ruth Veronica | Konferenzbeitrag |
| 2018 | A delamination strategy for thinly layered defect-free high-mobility black phosphorus flakes
Yang, Sheng; Zhang, Ke; Ricciardulli, Antonio Gaetano; Zhang, Panpan; Liao, Zhongquan; Lohe, Martin R.; Zschech, Ehrenfried; Blom, Paul W.M.; Pisula, Wojciech; Müllen, Klaus; Feng, Xinliang | Zeitschriftenaufsatz |
| 2018 | Deriving the Principles of the Freeze Foaming Process by CT evaluation of Cellular Bioceramics
Ahlhelm, Matthias; Werner, David; Kaube, Nils; Maier, Johanna; Abel, Johannes; Behnisch, Thomas; Moritz, Tassilo; Michaelis, Alexander; Gude, Maik | Zeitschriftenaufsatz |
| 2018 | Desorption and electrical conductivity studies of indium tin oxide powders and thick films
Dietrich, Stefan; Kusnezoff, Mihails | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2018 | Detection of diclofenac molecules by planar and nanostructured plasmonic sensor substrates
Steinke, Nadja; Rio, Marisa; Wuchrer, Roland; Schuster, Christiane; Ljasenko, Evgenij; Knopp, Dietmar; Gerlach, Gerald; Härtling, Thomas | Zeitschriftenaufsatz |
| 2018 | Development and analysis of high temperature stable interconnections on thick films using micro resistance welding for sensors and MEMS
Gierth, Paul; Rebenklau, Lars | Konferenzbeitrag |
| 2018 | Development and application of a SimulationX library for magnetic shape memory alloys
Effner, Annabell; Zawada, Tobias; Ehle, Fabian; Neubert, Holger; Weber, Jürgen | Konferenzbeitrag |
| 2018 | Development and application of binary suspensions in the ternary system Cr2O3-TiO2-Al2O3 for S-HVOF spraying
Potthoff, Annegret; Kratzsch, Robert; Barbosa, Maria M.; Kulissa, Nick; Kunze, Oliver; Toma, Filofteia-Laura | Zeitschriftenaufsatz |
| 2018 | Development of a new highly efficient and fuel flexible medium-scale CHP technology based on fixed-bed updraft biomass gasification and a SOFC
Brunner, Thomas; Biedermann, Friedrich; Obernberger, Ingwald; Hirscher, Simon; Schöch, Martin; Milito, Claudio; Leibold, Hans; Sitzmann, Jürgen; Megel, Stefan; Hauth, Martin; Vos, Yves de; Götz, Thomas; Shen, Li; Corona, Blanca | Konferenzbeitrag |
| 2018 | Development of single-fiber piezocomposite transducers for 3D ultrasound computer tomography
Zapf, Michael; Hohlfeld, Kai; Ruiter, Nicole V.; Pfistner, Patrick; Dongen, Koen W.A. van; Gemmeke, Hartmut; Michaelis, Alexander; Gebhardt, Sylvia | Zeitschriftenaufsatz |
| 2018 | Developments for highly reliable electronics - experiments on combined thermal and vibration loading
Meier, Karsten; Röllig, Mike; Bock, Karlheinz | Konferenzbeitrag |
| 2018 | Dielektrisches Element sowie ein Verfahren zur Herstellung
Greiner, Anna; Neubert, Holger; Neumeister, Peter | Patent |
| 2018 | Direct measurement of the electrocaloric temperature change in multilayer ceramic components by resistance-welded thermocouple wires
Greiner, Anna; Molin, Christian; Neubert, Holger; Gebhardt, Sylvia; Neumeister, Peter | Zeitschriftenaufsatz |
| 2018 | Dynamic in vitro microfluidic system for standardised osteoimmunological evaluation of implant materials
Ißleib, Constantin; Kuhlmeier, Dirk; Spohn, Juliane | Poster |
| 2018 | Eddy current testing in CFRP production
Bardl, Georg; Kupke, Richard; Heuer, Henning; Cherif, Chokri | Zeitschriftenaufsatz |
| 2018 | Effect of TiB2 nano-inclusions on the thermoelectric properties of boron rich boron carbide
Ponnusamy, Prasanna; Feng, Bing; Martin, Hans-Peter; Groen, Pim | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2018 | Einflüsse von Prozessparametern auf das Gefüge und das Korrosionsverhalten von Metall-Keramik-Werkstoffverbunden
Günther, Anne
: Aneziris, Christos G. (Gutachter); Michaelis, Alexander (Gutachter) | Dissertation |
| 2018 | Electrochemical characterization of a CFY-stack with planar electrolyte-supported solid oxide cells in rSOC operation
Preininger, Michael; Subotić, Vanja; Stoeckl, Bernhard; Schauperl, Richard; Reichholf, David; Megel, Stefan; Kusnezoff, Mihails; Hochenauer, Christoph | Zeitschriftenaufsatz |
| 2018 | Electrochemical deposition of reactive material systems for assembly and packaging applications
Hertel, Silvia; Schulte, Wiebke; Weiser, Mathias; Becker, Mike; Wiemer, Maik; Otto, Thomas | Konferenzbeitrag |
| 2018 | Electrochemical machining of tungsten carbide
Schubert, Nora; Schneider, Michael; Michaelis, Alexander; Manko, Michal; Lohrengel, Manuel M. | Zeitschriftenaufsatz |
| 2018 | Enhancement of hardness in niobium carbide composites
Pötschke, J.; Vornberger, A.; Berger, C. | Konferenzbeitrag |
| 2018 | Entwicklung angepasster Simulationsmodelle für Methoden der Zustandsüberwachung basierend auf geführten Wellen
Tschöke, Kilian; Gaul, Tobias | Vortrag |
| 2018 | Entwicklung und Charakterisierung von LTCC/Piezokeramik-Modulen für adaptive Strukturkomponenten
Flössel, Markus
: Michaelis, Alexander (Gutachter); Drossel, Welf-Guntram (Gutachter); Gebhardt, Sylvia (Betreuer) | Dissertation |
| 2018 | Entwicklung von miniaturisierten Dickschicht-Thermoelement-Arrays für automobile und industrielle Anwendungen
Gierth, Paul; Rebenklau, Lars; Bachmann, Eric; Niedermeyer, Lars; Augsburg, Klaus | Konferenzbeitrag |
| 2018 | Erratum to "Semi-empirical master curve concept describing the rate capability of lithium insertion electrodes" [J. Power Sources 380 (2018) 83-91]
Heubner, Christian; Seeba, Jann; Liebmann, Tobias; Nickol, Alexander; Börner, Stefan; Fritsch, Marco; Nikolowski, Kristian; Wolter, Mareike; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | Evaluation of Nanoparticle Inks on Flexible and Stretchable Substrates for Biocompatible Application
Schubert, Martin; Rebohle, Lars; Wang, Yakun; Fritsch, Marco; Bock, Karlheinz; Vinnichenko, Mykola; Schumann, Thomas | Konferenzbeitrag |
| 2018 | Evaluation of the pH-sensitive swelling of a hydrogel by means of a plasmonic sensor substrate
Kroh, Christoph; Wuchrer, Roland; Günther, Margarita; Härtling, Thomas; Gerlach, Gerald | Zeitschriftenaufsatz |
| 2018 | Evaluation of the pore morphology formation of the Freeze Foaming process by in situ computed tomography
Ahlhelm, Matthias; Werner, David; Maier, Johanna; Abel, Johannes; Behnisch, Thomas; Moritz, Tassilo; Michaelis, Alexander; Gude, Maik | Zeitschriftenaufsatz |
| 2018 | Experimental determination of the Young's modulus of copper and solder materials for electronic packaging
Krämer, Frank; Röllig, Mike; Metasch, René; Ahmar, Joseph Al; Meier, Karsten; Wiese, Steffen | Zeitschriftenaufsatz |
| 2018 | Experimental evaluation of volumetric solar absorbers - ceramic foam vs. an innovative rotary disc absorber concept
Zaversky, Fritz; Sánchez, Marcelino; Roldán, M. Isabel; Ávila-Marin, Antonio L.; Füssel, Alexander; Adler, Jörg; Knoch, Martin; Dreitz, Andreas | Konferenzbeitrag |
| 2018 | Experimental Verification of FE-Models for Thermo-Mechanical Loading using Digital Image Correlation
Schwerz, Robert; Metasch, René; Röllig, Mike; Wolter, Klaus-Jürgen | Konferenzbeitrag |
| 2018 | Fatigue measurement setup under combined thermal and vibration loading on electronic SMT assembly
Meier, K.; Metasch, R.; Roellig, M.; Bock, K. | Zeitschriftenaufsatz |
| 2018 | Flammenionisationsdetektor mit interner Gasversorgung in Mehrlagenkeramiktechnologie
Ziesche, Steffen; Lenz, Christian; Kuipers, Winfred; Förster, Jan; Koch, Christian | Konferenzbeitrag |
| 2018 | Flexible high-performance metallic interconnects prepared by innovative diode laser array treatment of inkjet-printed layers
Vinnichenko, Mykola; Fritsch, Marco; Xiao, Junchen; Makarov, Denys; Voitsekhivska, Tetiana; Sauchuk, Viktar; Kusnezoff, Mihails | Abstract |
| 2018 | FO-WLP multi-DOF inertial sensor for automotive applications
Kuisma, Heikki; Cardoso, Andre; Mäntyoja, Nikolai; Rosenkrantz, Rüdiger; Nurmi, Sami; Gall, Martin | Konferenzbeitrag |
| 2018 | Fraunhofer Institute for Ceramic Technologies and Systems. Annual Report 2017/2018
| Jahresbericht |
| 2018 | Fraunhofer-Institut für Keramische Technologien und Systeme. Jahresbericht 2017/2018
| Jahresbericht |
| 2018 | Füllverhalten, Schüttungszustand und resultierende Qualität keramischer Bauteile - Prozessführung und Prozessdesign von Matrizenfüllsystemen
Fries, Manfred; Kraft, T. | Bericht |
| 2018 | Functional integration - structure-integrated wireless sensor technology targeting smart mechanical engineering applications
Rülke, Steffen; Beyer, Volkhard; Zorn, Wolfgang; Meinig, Marco; Wecker, Julia; Reuter, Danny; Deicke, Frank; Clausner, André; Werner, Thomas | Konferenzbeitrag |
| 2018 | Gaskorrosion
Klemm, Hagen | Aufsatz in Buch |
| 2018 | Gassensitives Sensorelement
Dietrich, Stefan; Kusnezoff, Mihails | Patent |
| 2018 | Gating hysteresis as an indicator for silicon nanowire FET biosensor
Ibarlucea, Bergoi; Römhildt, Lotta; Zörgiebel, Felix; Pregl, Sebastian; Vahdatzadeh, Maryam; Weber, Walter M.; Mikolajick, Thomas; Opitz, Jörg; Baraban, Larysa; Cuniberti, Gianaurelio | Zeitschriftenaufsatz |
| 2018 | Generative Fertigung keramischer Bauteile
Scheithauer, Uwe; Richter, Hans-Jürgen | Aufsatz in Buch |
| 2018 | Glass ceramics sealants for SOFC interconnects based on a high chromium sinter alloy
Schilm, Jochen; Rost, Axel; Kusnezoff, Mihails; Megel, Stefan; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | Grain growth inhibition of hardmetals during initial heat-up
Pötschke, Johannes; Gestrich, Tim; Richter, Volkmar | Zeitschriftenaufsatz |
| 2018 | Hartmetallschichten - Historie und Perspektiven
Berger, Lutz-Michael | Konferenzbeitrag |
| 2018 | Hartstoffbeschichtete Körper aus Metall, Hartmetall, Cermet oder Keramik und Verfahren zur Herstellung derartiger Körper
Endler, Ingolf; Höhn, Mandy | Patent |
| 2018 | Heat development during the ECM of tungsten carbide
Schneider, Michael; Junker, Nils | Konferenzbeitrag |
| 2018 | Heat generation rates of NaFePO4 electrodes for sodium-ion batteries and LiFePO4 electrodes for lithium-ion batteries
Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | Heat haze effects in thermal chamber tensile tests on digital image correlation
Yuile, Adam; Schwerz, Robert; Röllig, Mike; Metasch, René; Wiese, Steffen | Konferenzbeitrag |
| 2018 | High-definition nanoimprint stamp fabrication by atomic layer etching
Khan, Sabbir A.; Suyatin, Dmitry B.; Sundqvist, Jonas; Graczyk, Mariusz; Junige, Marcel; Kauppinen, Christoffer; Kvennefors, Anders; Huffman, Maria; Maximov, Ivan | Zeitschriftenaufsatz |
| 2018 | Highly Efficient Production of Valuable Hydrocarbons from CO2 and H2O via an Integrated co-Electrolysis-Based Synthesis Process
Reichelt, Erik; Herz, Gregor; Schaller, Max Rudolf; Jahn, Matthias | Konferenzbeitrag |
| 2018 | How additive manufacturing can shape an industry 4.0 environment
Müller, Bernhard; Frieß, Uwe; Langer, Tino; Töppel, Thomas; Gebauer, Mathias; Klaeger, Uwe; Wollbrink, Moritz; Zöllner, Volker; Lausch, Holger | Vortrag |
| 2018 | Hybridization of materials and processes by additive manufacturing
Moritz, Tassilo; Scheithauer, Uwe; Weingarten, Steven; Abel, Johannes; Johne, Robert; Michaelis, Alexander; Hampel, Stefan; Cano, Santiago | Konferenzbeitrag |
| 2018 | Imitating the weathering of microplastics in the marine environment
Oelschlägel, Kathrin; Pfeiffer, Jenny; Potthoff, Annegret | Konferenzbeitrag |
| 2018 | Improving the high temperature abrasion resistance of thermally sprayed Cr3C2-NiCr coatings by WC addition
Janka, Leo; Berger, Lutz-Michael; Norpoth, Jonas; Trache, Richard; Thiele, Sven; Tomastik, Christian; Matikainen, Ville; Vuoristo, Petri | Zeitschriftenaufsatz |
| 2018 | In-situ X-ray microscopy of crack-propagation to study fracture mechanics of on-chip interconnect structures
Kutukova, Kristina; Liao, Zhongquan; Werner, Stephan; Guttmann, Peter; Standke, Yvonne; Gluch, Jürgen; Schneider, Gerd; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2018 | In-situ xrd-investigation of electrolytic copper layer
Schneider, Michael; Weiser, Mathias; Matthey, Björn; Herrmann, Mathias | Zeitschriftenaufsatz |
| 2018 | Influence of feedstock powder modification by heat treatments on the properties of APS-sprayed Al2O3-40%TiO2 coatings
Berger, Lutz-Michael; Sempf, Kerstin; Sohn, Yoo Jung; Vaßen, Robert | Zeitschriftenaufsatz |
| 2018 | Influence of the glass-ceramic synthesis route on the ionicconductivity of the sodium solid electrolyte Na2O-Y2O3-SiO2 (NYS)
Münchgesang, Wolfram; Wagner, Dörte; Motylenko, Mykhaylo; Schilm, Jochen; Rafaja, David; Meyer, Dirk | Abstract |
| 2018 | Innovative laser processing of inkjet-printed layers
Vinnichenko, Mykola; Fritsch, Marco; Makarov, Denys; Trofimenko, Nikolai; Sauchuk, Viktar; Kusnezoff, Mihails | Poster |
| 2018 | Integration sensorisch-diagnostischer und aktorisch-therapeutischer Funktionen in Implantaten
Lausch, Holger; Töppel, Thomas | Aufsatz in Buch |
| 2018 | Integrierte Strukturüberwachung für kohlefaserverstärkte Kunststoffverbundwerkstoffe im Automobil
Tschöke, Kilian; Gaul, Tobias; Klesse, Thomas; Lieske, Uwe; Dungern, Friedrich von; Guerrero-Santafe, Julia; Wessel-Segebade, Hannelore | Vortrag |
| 2018 | Inter-diffusion between thermally sprayed Cr3C2-NiCr coatings and an Alloy 625 substrate during long-term exposure at 500 °C, 700 °C and 900 °C
Matthews, Steven; Berger, Lutz-Michael | Zeitschriftenaufsatz |
| 2018 | Internal dynamics of blended Li-insertion electrodes
Heubner, Christian; Liebmann, Tobias; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | Investigation of droplet deposition for suspensions usable for Thermoplastic 3D Printing (T3DP)
Scheithauer, Uwe; Johne-Michaelis, Robert; Weingarten, Steven; Schwarzer, Eric; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | Investigation of electrochemical processes in CO2 sensitive electrodes
Dietrich, Stefan; Kusnezoff, Mihails; Mosch, Sindy; Baumgärtner, Christoph | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2018 | Investigation of foam structure formation in the freezing foaming process based on in-situ computed tomography
Maier, Johanna; Behnisch, Thomas; Geske, Vinzenz; Ahlhelm, Matthias; Werner, David; Moritz, Tassilo; Michaelis, Alexander; Gude, Maik | Zeitschriftenaufsatz |
| 2018 | Investigation of percolation behavior of metal-polymer composites using High Frequency Eddy Current spectroscopy
Datzmann, Iryna
: Hillmann, Susanne (Betreuer); Heuer, Henning (Gutachter); Plettemeier, Dirk (Vorsitzender); Boller, Christian (Gutachter); Tatarchuk, Dmytro (Gutachter) | Dissertation |
| 2018 | Investigation of the foam development stages by non-destructive testing technology using the freeze foaming process
Maier, Johanna; Behnisch, Thomas; Geske, Vinzenz; Ahlhelm, Matthias; Werner, David; Moritz, Tassilo; Michaelis, Alexander; Gude, Maik | Zeitschriftenaufsatz |
| 2018 | Investigation of the structure formation of Freeze Foams on the example of biocompatible ceramics
Werner, David; Ahlhelm, Matthias; Maier, Johanna; Behnisch, Thomas; Moritz, Tassilo; Michaelis, Alexander; Gude, Maik | Vortrag |
| 2018 | Iron-based Fischer-Tropsch catalysts for higher alcohol synthesis
Schaller, Max Rudolf; Reichelt, Erik; Jahn, Matthias | Zeitschriftenaufsatz |
| 2018 | Irreversible made reversible: Increasing the electrochemical capacity by understanding the structural transformations of NaxCo0.5Ti0.5O2
Maletti, Sebastian; Giebeler, Lars; Oswald, Steffen; Tsirlin, Alexander A.; Senyshyn, Anatoliy; Michaelis, Alexander; Mikhailova, Daria | Zeitschriftenaufsatz |
| 2018 | Komposit-Kathodenschichtaufbau für Festkörperbatterien auf Lithiumbasis und ein Verfahren zu seiner Herstellung
Kusnezoff, Mihails; Nikolowski, Kristian; Schilm, Jochen; Wolter, Mareike | Patent |
| 2018 | Korrosion in wässrigen Medien
Schilm, Jochen; Herrmann, Mathias | Aufsatz in Buch |
| 2018 | Kundenspezifische Ultraschallwandler auf Basis von 1-3-Piezokompositen
Hohlfeld, Kai; Neumeister, Peter; Neubert, Holger; Gebhardt, Sylvia | Vortrag |
| 2018 | Laboratory computed x-ray tomography - a nondestructive technique for 3D microstructure analyis of materials
Zschech, Ehrenfried; Löffler, Markus; Krüger, Peter; Gluch, Jürgen; Kutukova, Kristina; Zglobicka, Izabela; Silomon, Jendrik; Rosenkranz, Rüdiger; Standke, Yvonne; Topal, E. | Zeitschriftenaufsatz |
| 2018 | A laboratory X-ray microscopy study of cracks in on-chip interconnect stacks of integrated circuits
Kutukova, Kristina; Niese, Sven; Sander, Christoph; Standke, Yvonne; Gluch, Jürgen; Gall, Martin; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2018 | Langzeitzuverlässige Füllstandsmessung durch ein faserverbundintegriertes Elektroniksystem
Schwerz, Robert; Röllig, Mike; Weißenborn, Oliver; Geller, Sirko; Modler, Niels; Sauer, Sebastian | Konferenzbeitrag |
| 2018 | Laser Speckle Photometry - an advanced method for defect detection in ceramics
Chen, Lili; Cikalova, Ulana; Bendjus, Beatrice | Konferenzbeitrag |
| 2018 | Laser Speckle Photometry for Stress Measuring at Industrial Components
Chen, Lili; Cikalova, Ulana; Münch, Stefan; Röllig, Mike; Bendjus, Beatrice | Konferenzbeitrag |
| 2018 | Laser-Multi-Pass-Narrow-Gap-Schweißen - Eine neue Technologie zum Fügen von dickwandigen Bauteilen in Kraftwerken
Keßler, Benjamin; Brenner, Berndt; Dittrich, Dirk; Maier, G.; Oesterlin, H.; Bendjus, Beatrice | Zeitschriftenaufsatz |
| 2018 | Leuchtstoffbasiertes Dosimetrieverfahren für elektronenbestrahlte Verpackungsmaterialien
Heymann, Manuela
: Marschner, Uwe; Gerlach, Gerald (Gutachter); Eychmüller, Alexander (Gutachter) | Dissertation |
| 2018 | Lokale Beeinflussung des Gussgefüges durch den gezielten Einsatz von Formstoffen
Schönfeld, Katrin; Martin, Hans-Peter; Parschick, Felix; Hillmann, Susanne | Zeitschriftenaufsatz |
| 2018 | Low temperature co-fired ceramics technology for active eddy current turbocharger speed sensors
Ihle, Martin; Ziesche, Steffen; Gierth, Paul; Tuor, Andreas; Tigelaar, Jonathan; Hirsch, Oliver | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2018 | Macroscopic aerogels with retained nanoscopic plasmonic properties
Kodanek, Torben; Freytag, Axel; Schlosser, Anja; Naskar, Suraj; Härtling, Thomas; Dorfs, Dirk; Bigall, Nadja Carola | Zeitschriftenaufsatz |
| 2018 | Manufacturing technologies for ultrasonic transducers in a broad frequency range
Gebhardt, Sylvia; Hohlfeld, Kai; Günther, Paul; Neubert, Holger | Konferenzbeitrag |
| 2018 | Manufacturing technologies of piezoelectric components for integration into lightweight structures
Hohlfeld, Kai; Rhein, Sebastian; Flössel, Markus; Michaelis, Alexander; Gebhardt, Sylvia | Zeitschriftenaufsatz |
| 2018 | Mechanical and Thermophysical Properties of Hardmetals at Room and Elevated Temperatures
Vornberger, Anne; Pötschke, Johannes; Gestrich, Tim; Herrmann, Mathias | Konferenzbeitrag |
| 2018 | Metal-Ceramic Material Compounds Made by Additive Manufacturing
Moritz, Tassilo; Abel, Johannes; Scheithauer, Uwe; Müller-Köhn, Axel; Weingarten, Steven | Konferenzbeitrag |
| 2018 | Micro‐electrochemical investigation of the passive behavior of thin anodic titanium oxide films on TiAlV6‐4
Langklotz, Ulrike; Noeske, Michael; Schneider, Michael | Zeitschriftenaufsatz |
| 2018 | Microstructural characteristics and performances of Cr2O3 and Cr2O3-15%TiO2 S-HVOF coatings obtained from water-based suspensions
Toma, Filofteia-Laura; Potthoff, Annegret; Barbosa, Maria Ingrid Rocha | Zeitschriftenaufsatz |
| 2018 | Modular ceramic scaffolds for individual implants
Biggemann, Jonas; Pezoldt, Marc; Stumpf, Martin; Greil, Peter; Fey, Tobias | Zeitschriftenaufsatz |
| 2018 | Multi-modal porous microstructure for high temperature fuel cell application
Wejrzanowski, T.; Haj Ibrahim, S.; Cwieka, K.; Löffler, Markus; Milewski, J.V.; Zschech, Ehrenfried; Lee, C.-G. | Zeitschriftenaufsatz |
| 2018 | Multilayer ceramics for electrocaloric cooling applications
Molin, Christian; Neumeister, Peter; Neubert, Holger; Gebhardt, Sylvia | Zeitschriftenaufsatz |
| 2018 | Multilayer Laue Lenses (MLL) with 45 mm focal length as optics for in-situ nanoindentation experiments
Kubec, Adam; Niese, Sven; Gluch, Jürgen; Rosenthal, Martin; Todt, Juraj; Keckes, Jozef; Gawlitza, Peter | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2018 | Nano‐sized zeolite particles as inhibitor carrier in plasma electrolytic oxide layers on AZ31
Schneider, Michael; Kremmer, Kerstin; Tabatabai, Dominik; Fürbeth, Wolfram | Zeitschriftenaufsatz |
| 2018 | Nanomaterialien für elektrische Energiespeicher
Calgar, Burak; Fischer, Peter; Hagen, Markus; Tübke, Jens; Althues, Holger; Dörfler, Susanne; Guntow, Uwe; Schulz, Jochen; Endler, Ingolf; Fritsch, Marco; Meißner, Frank; Wolter, Mareike | Aufsatz in Buch |
| 2018 | Nanomaterials: Certain aspects of application, risk assessment and risk communication
Laux, Peter; Tentschert, Jutta; Riebeling, Christian; Braeuning, Albert; Creutzenberg, Otto; Epp, Astrid; Fessard, Valérie; Haas, Karl-Heinz; Haase, Andrea; Hund-Rinke, Kerstin; Jakubowski, Norbert; Kearns, Peter; Lampen, Alfonso; Rauscher, Hubert; Schoonjans, Reinhilde; Störmer, Angela; Thielmann, Axel; Mühle, Uwe; Luch, Andreas | Zeitschriftenaufsatz |
| 2018 | Nanoparticle-based impregnation of chromate-free anodizing layers for corrosion protection and adhesive bonding
Anthes, Adrian; Weidmann, Stefanie; Fürbeth, Wolfram; Kremmer, Kerstin; Schneider, Michael | Zeitschriftenaufsatz |
| 2018 | Nanoskaliges Hartmetall - Fiktion oder Realität?
Michaelis, Alexander; Pötschke, Johannes; Richter, Volkmar | Aufsatz in Buch |
| 2018 | Natriumionenleitende Membran, basierend auf einem Natrium-Beta'' -Aluminatsystem, sowie Verfahren zur Herstellung einer solchen
Grund, Martin; Schulz, Matthias; Weidl, Roland | Patent |
| 2018 | Neuartige Nahinfrarot-Sensoren für vielfältige Anwendungsfälle
Jahnel, Matthias; Langer, Robert; Brückner, Robert; Meerheim, Rico; Wynands, David; Härtling, Thomas; Hauptmann, Marek; Timmreck, Ronny; Leo, Karl | Konferenzbeitrag |
| 2018 | New Approach of Metal Substrate Fabrication for Metal-Supported Solid Oxide Fuel Cells
Günther, Anne; Moritz, Tassilo; Müller-Köhn, Axel; Härtel, Anja; Kusnezoff, Mihails; Fritsch, Marco; Trofimenko, Nikolai; Bremerstein, Irina; Kamptner, Andre | Konferenzbeitrag |
| 2018 | Nichtoxidische Werkstoffe für Vergasungsreaktoren
Herrmann, Mathias; Standke, Gisela; Himpel, Gert; Höhn, Sören; Heymer, Heike; Kunze, Steffen | Aufsatz in Buch |
| 2018 | Nonlinear effects of micro-cracks on acoustic surface and wedge waves
Rjelka, Marek; Pupyrev, Pavel D.; Köhler, Bernd; Mayer, Andreas P. | Zeitschriftenaufsatz |
| 2018 | Nonlinear effects of micro-cracks on long-wavelength symmetric Lamb waves
Rjelka, Marek; Köhler, Bernd; Mayer, Andreas | Zeitschriftenaufsatz |
| 2018 | Nonlinear ultrasonic modulation based failure warning for aluminum plates subject to fatigue loading
Kim, Yongtak; Lim, Hyung Jin; Sohn, Hoon | Zeitschriftenaufsatz |
| 2018 | Novel concept of an in-situ test system for the thermal-mechanical fatigue measurement for reliability evaluation of electronic solder joints
Metasch, René; Röllig, Mike; Naumann, Uwe; Wiesenhütter, Felix; Kaufmann, R. | Konferenzbeitrag |
| 2018 | A novel micro-double cantilever beam (micro-DCB) test in an X-ray microscope to study crack propagation in materials and structures
Kutukova, Kristina; Niese, Sven; Gelb, Jeff; Dauskardt, Reinhold; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2018 | Novel poling method for piezoelectric 0-3 composites and transfer to series production
Eßlinger, Sophia; Geller, Sirko; Hohlfeld, Kai; Gebhardt, Sylvia; Michaelis, Alexander; Gude, Maik; Schönecker, Andreas; Neumeister, Peter | Zeitschriftenaufsatz |
| 2018 | Novel thermocouples for automotive applications
Gierth, Paul; Rebenklau, Lars; Augsburg, Klaus; Niedermeyer, Lars; Bachmann, Eric | Zeitschriftenaufsatz |
| 2018 | Numerical and experimental evaluation and optimization of ceramic foam as solar absorber - single-layer vs multi-layer configurations
Zaversky, Fritz; Aldaz, Leticia; Sánchez, Marcelino A.D.; Ávila-Marin, Antonio L.; Roldán, M.I.; Fernández-Reche, Jesús; Füssel, Alexander; Beckert, Wieland; Adler, Jörg | Zeitschriftenaufsatz |
| 2018 | On the numerical convergence and performance of different spatial discretization techniques for transient elastodynamic wave propagation problems
Tschöke, Kilian; Gravenkamp, Hauke | Zeitschriftenaufsatz |
| 2018 | On the stability of c-BN-reinforcing particles in ceramic matrix materials
Wolfrum, Anne-Kathrin; Matthey, Björn; Michaelis, Alexander; Herrmann, Mathias | Zeitschriftenaufsatz |
| 2018 | Overload-proof LTCC differential pressure sensors for high temperature applications
Goldberg, Adrian; Manhica, Birgit; Ziesche, Steffen; Partsch, Uwe | Konferenzbeitrag |
| 2018 | Oxidation und Nichtoxiden
Klemm, Hagen | Aufsatz in Buch |
| 2018 | Oxide multilayer thermoelectric generators
Töpfer, Jörg; Reimann, Timmy; Schulz, Thomas; Bochmann, Arne; Capraro, Beate; Barth, Stefan; Vogel, Andy; Teichert, Steffen | Zeitschriftenaufsatz |
| 2018 | Oxygen development during the ECM on SiC
Simunkova, Lenka; Junker, Nils; Schneider, Michael; Michaelis, Alexander | Konferenzbeitrag |
| 2018 | Partikel aus einem feuerfesten keramischen Werkstoff zur Beeinflussung der Rissbildung in Hochtemperaturwerkstoffen und Verfahren zu ihrer Herstellung
Aneziris, Christos; Scheithauer, Uwe | Patent |
| 2018 | Partikel aus einem feuerfesten keramischen Werkstoff zur Beeinflussung der Schadenstoleranz von Hochtemperaturwerkstoffen, und Verfahren zu ihrer Herstellung
Aneziris, Christos; Scheithauer, Uwe | Patent |
| 2018 | Performance of a new piezoceramic thick film sensor for measurement and control of cutting forces during milling
Drossel, Welf-Guntram; Gebhardt, Sylvia; Bucht, André; Kranz, Burkhard; Schneider, Jörg; Ettrichrätz, Martin | Zeitschriftenaufsatz |
| 2018 | Piezofibre composite transducers for next generation 3D USCT
Zapf, Michael; Hohlfeld, Kai; Pfistner, P.; Liberman, C.; Dongen, K.W.A. van; Gemmeke, Hartmut; Ruiter, Nicole V.; Michaelis, Alexander; Gebhardt, Sylvia | Konferenzbeitrag |
| 2018 | Plasmonic sensor system for on-site monitoring of diclofenac molecules
Steinke, Nadja; Wuchrer, Roland; Döring, Sarah; Gerlach, Gerald; Härtling, Thomas | Konferenzbeitrag |
| 2018 | Poling technologies and design optimization for integrated piezoelectric bulk transducers and piezoelectric composites
Eßlinger, Sophia; Schönecker, Andreas; Neumeister, Peter | Zeitschriftenaufsatz |
| 2018 | Polymerization driven monomer passage through monolayer chemical vapour deposition graphene
Zhang, Tao; Liao, Zhongquan; Medrano Sandonas, Leonardo; Dianat, Arezoo; Liu, Xiaoling; Xiao, Peng; Amin, Ihsan; Gutierrez, Rafael; Chen, Tao; Zschech, Ehrenfried; Cuniberti, Gianaurelio; Jordan, Rainer | Zeitschriftenaufsatz |
| 2018 | Prediction of SRAM reliability under mechanical stress induced by harsh environments
Warmuth, Jens; Giering, Kay-Uwe; Lange, André; Clausner, André; Schlipf, Simon; Kurz, Gottfried; Otto, Michael; Paul, Jens; Jancke, Roland; Aal, Andreas; Gall, Martin; Zschech, Ehrenfried | Konferenzbeitrag |
| 2018 | Production of Multimaterial Components by Material Extrusion - Fused Filament Fabrication (ME-FFF)
Kukla, Christian; Cano, Santiago; Moritz, Tassilo; Müller-Köhn, Axel; Günther, Anne; Hampel, Stefan; Holzer, Clemens | Konferenzbeitrag |
| 2018 | Properties of Additive Manufactured Hardmetal Components produced by Fused Filament Fabrication (FFF)
Berger, Christian; Abel, Johannes; Pötschke, Johannes; Moritz, Tassilo | Konferenzbeitrag |
| 2018 | Prospect of open-cell solid foams for floating-platform multiphase reactor applications - maldistribution susceptibility and hydrodynamic behavior
Dashliborun, Amir Motamed; Füssel, Alexander; Larachi, Faical | Zeitschriftenaufsatz |
| 2018 | Quantitative analysis of backscattered electron (BSE) contrast using low voltage scanning electron microscopy (LVSEM) and its application to Al0.22Ga0.78N/GaN layers
Garitagoitia, Maria Aranzazu; Rosenkranz, Rüdiger; Löffler, M.; Clausner, André; Standke, Yvonne; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2018 | Quasi-adiabatic calorimeter for direct electrocaloric measurements
Sanlialp, Mehmet; Shvartsman, Vladimir V.; Faye, Romain; Karabasov, Maksim O.; Molin, Christian; Gebhardt, Sylvia; Defay, Emmanuel; Lupascu, Doru C. | Zeitschriftenaufsatz |
| 2018 | Reaktionstechnische Untersuchung der Verbrennungsprozesse in porösen inerten Medien aus Siliziumkarbid
Marschallek, Felix
: Michaelis, Alexander (Gutachter); Beckmann, Michael (Gutachter) | Dissertation |
| 2018 | Recent insights into the electrochemical behavior of blended lithium insertion cathodes: A review
Heubner, Christian; Liebmann, Tobias; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | Reliability analysis of encapsulated components in 3D-circuit board integration
Schwerz, Robert; Röllig, Mike; Wolter, Klaus-Jürgen | Konferenzbeitrag |
| 2018 | Scalable fabrication of nanostructured tin oxide anodes for high-energy lithium-ion batteries
Heubner, Christian; Liebmann, Tobias; Voigt, Karsten; Weiser, Mathias; Matthey, Björn; Junker, Nils; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | Schallemissionsmessungen während der Durchführung von Zugversuchen an GFK-Proben
Weihnacht, Bianca; Schulze, Eberhard; Pietzsch, Alexander; Schubert, Lars; Vandenbrande, A.; Borchers, K.-W.; Cerbe, Burkhard | Vortrag |
| 2018 | Schutzschichten für keramische Faserverbundwerkstoffe
Kunz, Willy; Schönfeld, Katrin; Klemm, Hagen | Zeitschriftenaufsatz |
| 2018 | Self-Sensing Actuators Based on Ferromagnetic Shape Memory Alloys
Ehle, Fabian; Neumeister, Peter; Keitel, Uwe; Neubert, Holger | Konferenzbeitrag |
| 2018 | Semi-empirical master curve concept describing the rate capability of lithium insertion electrodes
Heubner, Christian; Seeba, Jann; Liebmann, Tobias; Nickol, Alexander; Börner, Stefan; Fritsch, Marco; Nikolowski, Kristian; Wolter, M.; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | Sensorsystem zur Charakterisierung des Zustandes von in einem Kultivierungsgefäß enthaltenen Proben einer heterogenen Biomassestruktur
Bendjus, Beatrice; Cikalova, Ulana; Eigner, Jürgen; Reichelt, Matthias; Schott, Carolin; Steingroewer, Juliane; Werner, Thomas | Patent |
| 2018 | Setup für Ermüdungsversuche an elektronischen Komponenten unter kombinierten Temperatur- und Vibrationslasten
Meier, Karsten; Metasch, René; Röllig, Mike; Bock, K. | Konferenzbeitrag |
| 2018 | Si amorphization by focused ion beam milling: Point defect model with dynamic BCA simulation and experimental validation
Huang, J.; Löffler, Markus; Mühle, Uwe; Möller, Wolfhard; Mulders, Johannes J.L.; Kwakman, Laurens; Dorp, Willem F. van; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2018 | Siliciumcarbid gebundene Diamantwerkstoffe - Herstellung, Mikrostruktur und Eigenschaften
Matthey, Björn
: Michaelis, Alexander (Gutachter); Vollstädt, Heiner (Gutachter); Herrmann, Mathias (Betreuer) | Dissertation |
| 2018 | Siliciumnitrid
Herrmann, Mathias | Aufsatz in Buch |
| 2018 | Sintering behavior, microstructure and thermoelectric properties of calcium cobaltite thick films for transversal thermoelectric multilayer generators
Schulz, Thomas; Reimann, Timmy; Bochmann, Arne; Vogel, Andy; Capraro, Beate; Mieller, Björn; Teichert, Steffen; Töpfer, Jörg | Zeitschriftenaufsatz |
| 2018 | Solder joint fatigue analysis under combined thermal and vibration loading
Meier, Karsten; Röllig, Mike; Liu, Y.; Bock, K. | Konferenzbeitrag |
| 2018 | Solid state sintered nanoscaled hardmetals and their properties
Pötschke, Johannes; Säuberlich, Tino; Vornberger, Anne; Meese-Marktscheffel, J.A. | Zeitschriftenaufsatz |
| 2018 | Structural integration of sensors/actuators by laser beam melting for tailored smart components
Töppel, Thomas; Lausch, Holger; Brand, Michael; Hensel, Eric; Arnold, Michael; Rotsch, Christian | Zeitschriftenaufsatz |
| 2018 | Studying the progress of sintering in ferrous powder compacts by in-situ measuring the thermal conductivity
Danninger, Herbert; Leitner, Gert; Gierl-Mayer, Christian | Zeitschriftenaufsatz |
| 2018 | Sub 25 nm focusing with a long working distance using multilayer Laue lenses
Kubec, Adam; Niese, Sven; Rosenthal, M.; Gluch, Jürgen; Burghammer, M.; Gawlitza, Peter; Keckes, J.; Leson, Andreas | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2018 | Sub-surface assessment of hydrothermal ageing in zirconia-containing femoral heads for hip joint applications
Grémillard, Laurent; Chêvalier, Jérôme; Martin, Laura; Douillard, Thierry; Begand, Sabine; Hans, K.; Oberbach, Thomas | Zeitschriftenaufsatz |
| 2018 | Surface integrity in ultra-precision grinding of transparent ceramics
Klocke, Fritz; Dambon, Olaf; Bletek, Thomas; Höche, Thomas; Naumann, Falk; Hutzler, Thomas | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2018 | Sustainable synthesis of high-surface-area graphite oxide via dry ball milling
Mahmoud, Alaa El Din; Stolle, Achim; Stelter, Michael | Zeitschriftenaufsatz |
| 2018 | Synthesis and shaping scale-up study of functionalized UiO-66 MOF for ammonia air purification filters
Khabzina, Yoldes; Dhainaut, Jeremy; Ahlhelm, Matthias; Richter, Hans-Jürgen; Reinsch, Helge; Stock, Norbert; Farrusseng, David | Zeitschriftenaufsatz |
| 2018 | Techno-economic analysis of a co-electrolysis-based synthesis process for the production of hydrocarbons
Herz, Gregor; Reichelt, Erik; Jahn, Matthias | Zeitschriftenaufsatz |
| 2018 | Theoretical optimization of electrode design parameters of Si based anodes for lithium-ion batteries
Heubner, Christian; Langklotz, Ulrike; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | Thermal behaviour of cermets and hardmetals during debinding and sintering
Gestrich, Tim; Kaiser, Arno; Pötschke, Johannes; Meinl, Juliane; Höhn, Sören | Zeitschriftenaufsatz |
| 2018 | Thermo-Mechanical Measurement Approach of Ag-sintered Joints for Power Electronics
Metasch, René; Meier, Karsten; Röllig, Mike | Konferenzbeitrag |
| 2018 | Thin bioactive Zn substituted hydroxyapatite coating deposited on ultrafine-grained titanium substrate
Prosolov, K.A.; Belyavskaya, O.A.; Muehle, U.; Sharkeev, Y.P. | Zeitschriftenaufsatz |
| 2018 | Time-resolved microscopy of fs-laser-induced heat flows in glasses
Bonse, Jörn; Seuthe, Thomas; Grehn, Moritz; Eberstein, Markus; Rosenfeld, Arkadi; Mermillod-Blondin, Alexandre | Zeitschriftenaufsatz |
| 2018 | Titanium oxynitride coatings deposited by magnetron sputtering for improvement of cardiovascular stent design
Duta, Oana Cristina; Ficai, Denisa; Ficai, Anton; Andronescu, Ecaterina; Beshchasna, Nataliia; Saqib, Muhammad; Opitz, Jörg; Kraśkiewicz, Honorata; Wasyluk, Łukasz; Kuzmin, Oleg; Pichugin,Vladimir | Konferenzbeitrag |
| 2018 | Umformbare keramische und/oder pulvermetallurgische Grünfolien und Verfahren zur Umformung dieser keramischen und/oder pulvermetallurgischen Grünfolien
Moritz, Tassilo; Schwarzer, Eric | Patent |
| 2018 | Untersuchungen zur Charakteristik und Applikationen des EsB Detektors
Garitagoitia Cid, María Aránzazu
: Rosenkranz, Rüdiger (Betreuer); Zschech, Ehrenfried (Betreuender Hochschullehrer); Bartha, Johann W. (Vorsitzender) | Dissertation |
| 2018 | Validation of different SAC305 material models calibrated on isothermal tests using in-situ TMF measurement of thermally induced shear load
Kuczynska, Marta; Schafet, Natalja; Becker, Ulrich; Metasch, René; Röllig, Mike; Kabakchiev, Alexander; Weihe, Stefan | Zeitschriftenaufsatz |
| 2018 | Ventil aus einem keramischen Werkstoff und ein Verfahren zu seiner Herstellung
Goldberg, Adrian; Partsch, Uwe; Ziesche, Steffen | Patent |
| 2018 | Verbundwerkstoffe mit sehr hoher Verschleißbeständigkeit
Adler, Jörg; Füssel, Alexander; Füssel, Thomas; Nelle, Stefan; Standke, Gisela | Patent |
| 2018 | Verfahren und Vorrichtung zur Aufbereitung von Abfallprodukten
Wufka, André; Faßauer, Burkhardt; Georgi, Hartmut; Müller, Pascal; Münch, Christiane; Weile, Frank | Patent |
| 2018 | Verfahren zum Auswerten eines digitalen Messsignals einer Wirbelstromprüfanordnung
Joneit, Dieter | Patent |
| 2018 | Verfahren zur Behandlung von Geothermalfluid- oder Formationswasserströmen durch kontinuierliche elektrochemische Abtrennung reduzierbarer Metall- und/ oder Metalloidionen aus dem Förderstrom
Friedrich, Hans-Jürgen; Hielscher, Mario; Hinrichs, Torsten; Rott, Hans-Jürgen | Patent |
| 2018 | Verfahren zur Bestimmung von mechanischen Spannungen in Substraten oder Schaltungsträgern, die mit einem keramischen Werkstoff gebildet sind
Bendjus, Beatrice; Cikalova, Ulana; Münch, Stefan; Röllig, Mike | Patent |
| 2018 | Verfahren zur Herstellung einer elektrochemischen Zelle sowie eine mit dem Verfahren hergestellte elektrochemische Zelle
Freytag, Christian; Kusnezoff, Mihails; Nikolowski, Kristian; Partsch, Uwe; Schilm, Jochen; Wolter, Mareike | Patent |
| 2018 | Verfahren zur Herstellung polykristalliner transparenter Formteile
Kemnitz, Erhard; Krahl, Thoralf; Reichel, Uwe | Patent |
| 2018 | Verfahren zur Herstellung von Hartmetallkörpern mittels 3D-Druck
Pötschke, Johannes; Richter, Hans-Jürgen | Patent |
| 2018 | Vorrichtung zur additiven Herstellung dreidimensionaler Bauteile
Abel, Johannes; Moritz, Tassilo; Scheithauer, Uwe; Schwarzer, Eric; Weingarten, Steven | Patent |
| 2018 | Vorrichtung zur Durchführung von Biegeversuchen an plattenförmigen Proben
Clausner, André; Gall, Martin; Macher, Frank; Sander, Christoph; Zschech, Ehrenfried | Patent |
| 2018 | Vorrichtung zur in situ Überprüfung der Qualität bei der generativen Fertigung von Bauteilen
Brosius, David Maximilian; Hillmann, Susanne; Krüger, Peter | Patent |
| 2018 | Warum nicht mal in Keramik? Keramische Lösungen für den Maschinenbau
Freund, Susanne | Zeitschriftenaufsatz |
| 2018 | Wear behavior of diamond-silicon nitride composites sintered with FAST/SPS
Wolfrum, Anne-Kathrin; Quitzke, Caroline; Matthey, Björn; Herrmann, Mathias; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2018 | Wirbelstromprüfung in der CFK-Fertigung
Bardl, Georg; Kupke, Richard; Heuer, Henning; Cherif, Chokri | Zeitschriftenaufsatz |
| 2018 | Zerstörungsfreie Prüfung
Hillmann, Susanne; Wunderlich, Christian; Heuer, Henning; Köhler, Bernd; Krüger, Peter; Opitz, Jörg; Stephan, Mareike; Tschöpe, Constanze; Wolf, Christian | Aufsatz in Buch |
| 2018 | Zuverlässigkeitsanalyse von gekapselten Bauelementen in der 3D-Leiterplattenintegration
Schwerz, Robert | Dissertation |
| 2017 | 13th International Symposium on ElectroChemical Machining Technology, INSECT 2017. Proceedings
: Michaelis, A.; Schneider, M. | Tagungsband |
| 2017 | 3D-Binder-Jetting von Hartmetallen
Pötschke, Johannes; Berger, Christian; Richter, Hans-Jürgen; Moritz, Tassilo | Zeitschriftenaufsatz |
| 2017 | Accelerated life time measurement with in-situ force and displacement monitoring during thermal cycling on solder joints
Metasch, René; Röllig, Mike; Kuczynska, Marta; Schafet, Natalja; Becker, Ulrich; Meier, Karsten; Panchenko, Iuliana | Konferenzbeitrag |
| 2017 | Additive manufacturing of hardmetals
Pötschke, Johannes; Berger, Christian; Richter, Hans-Jürgen; Scheithauer, Uwe; Weingarten, Steven | Konferenzbeitrag |
| 2017 | Advances in solid oxide fuel cells and electronic ceramics II
: Kusnezoff, Mihails (Hrsg.); Bansal, Narottam P. (Hrsg.); Shimamura, Kiyoshi (Hrsg.) | Tagungsband |
| 2017 | Advances in solid oxide fuel cells and electronic ceramics II. Preface
Kusnezoff, Mihails; Bansal, Narottam P.; Shimamura, Kiyoshi | Konferenzbeitrag |
| 2017 | Analysis of the effect of TSV-induced stress on devices performance by direct strain and electrical measurements and FEA simulations
Kteyan, Armen; Mühle, Uwe; Gall, Martin; Sukharev, Valeriy; Radojcic, Riko; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2017 | Anodic dissolution of solid-state sintered silicon carbide at high current densities
Schneider, Michael; Schubert, Nora; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Applications of metal foam as catalyst carrier
Walther, Gunnar; Gaitzsch, Uwe; Büttner, Tilo; Kieback, Bernd; Weißgärber, Thomas; Kolvenbach, Robin; Lincke, Marc | Konferenzbeitrag |
| 2017 | Area-selective atomic layer deposition of Ru on electron-beam-written Pt(C) patterns versus SiO2 substratum
Junige, Marcel; Löffler, Markus; Geidel, Marion; Albert, Matthias; Bartha, Johann W.; Zschech, Ehrenfried; Rellinghaus, Bernd; Dorp, Willem F. van | Zeitschriftenaufsatz |
| 2017 | Atomic layer etching of gallium nitride (0001)
Kauppinen, Christoffer; Khan, Sabbir Ahmed; Sundqvist, Jonas; Suyatin, Dmitry B.; Suihkonen, Sami; Kauppinen, Esko I.; Sopanen, Markku | Zeitschriftenaufsatz |
| 2017 | Auslegungsplattform für keramische Schraubendruckfedern
Beckert, Wieland; Stockmann, Jens; Koplin, Christof | Konferenzbeitrag |
| 2017 | An automated non-destructive testing system for seam bondings in automotive serial production
Klausing, Maximilian; Heuer, Henning | Zeitschriftenaufsatz |
| 2017 | Autonomer Flammenionisationsdetektor für den Explosionsschutz in Kanalisationsnetzen
Kuipers, Winfred; Förster, Jan; Koch, Christian; Goldberg, Adrian; Lenz, Christian; Ziesche, Steffen; Bechtold, F.; Jurkow, Dominik; Ruffmann, Bastian; Maurer, Peter; Großklags, Frank; Müller, Bettina | Zeitschriftenaufsatz |
| 2017 | Battery - Determination and Forecast via Synergetics
Haß, Ernst-Christoph; Knicker, Katharina; Sydow, Uwe; Schulz, Matthias; Plath, Peter J. | Aufsatz in Buch |
| 2017 | Biogas as an alternative carbon source for the production of waxes
Herz, Gregor; Reichelt, Erik; Jahn, Matthias | Konferenzbeitrag |
| 2017 | Carbide-oxide composites made from nanoscaled tungsten carbide, alumina and zirconia powders
Pötschke, Johannes; Berger, Christian; Vornberger, Anne | Konferenzbeitrag |
| 2017 | Carrier mobility shift in advanced silicon nodes due to chip-package interaction
Sukharev, Valeriy; Choy, Jun-Ho; Kteyan, Armen; Hovsepyan, Henrik; Nakamoto, Mark; Zhao, Wei; Radojcic, Riko; Mühle, Uwe; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2017 | CerAMfacturing, Development of ceramic and multi material components by additive manufacturing methods for personalized medical products, H2020
Moritz, Tassilo | Zeitschriftenaufsatz |
| 2017 | Ceramic-based 4D components: Additive Manufacturing (AM) of ceramic-based functionally graded materials (FGM) by thermoplastic 3D printing (T3DP)
Scheithauer, Uwe; Weingarten, Steven; Johne, Robert; Schwarzer, Eric; Abel, Johannes; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Ceramics with high electrical conductivity at room temperature
Martin, Hans-Peter; Feng, Bing; Michaelis, Alexander | Vortrag |
| 2017 | Characterizing micro-crack distributions with nonlinear acoustic surface and wedge waves
Rjelka, Marek; Köhler, Bernd; Pupyrev, Pavel; Mayer, Andreas | Konferenzbeitrag |
| 2017 | Chemische Gasphasenabscheidung. Beschichtungen
Gäbler, J.; Brand, C.; Paschke, H.; Endler, Ingolf | Aufsatz in Buch |
| 2017 | Co-electrolysis with CFY-stacks
Megel, Stefan; Dosch, Christian; Rothe, Stefan; Folgner, Christoph; Trofimenko, Nikolai; Rost, Axel; Kusnezoff, Mihails; Reichelt, Erik; Jahn, Matthias; Michaelis, Alexander; Bienert, Christian; Brandner, Marco | Konferenzbeitrag |
| 2017 | Combination of Tape Casting and Paper Technology for Producing Ceramic-Metal Composites and Their further Processing
Härtel, Anja; Richter, Hans-Jürgen; Moritz, Tassilo | Zeitschriftenaufsatz |
| 2017 | Combining flash sintering/sinterforging with hybrid FAST/SPS technology for oxide and non-oxide materials
Hennicke, Jürgen; Räthel, Jan; Kessel, Tobias | Konferenzbeitrag |
| 2017 | Comparison of direct electrocaloric characterization methods exemplified by 0.92 Pb(Mg1/3Nb2/3)O3-0.08 PbTiO3 multilayer ceramics
Molin, Christian; Peräntie, Jani; Goupil, Florian le; Weyland, Florian; Sanlialp, Mehmet; Stingelin, Natalie; Novak, Nikola; Lupascu, Doru C.; Gebhardt, Sylvia | Zeitschriftenaufsatz |
| 2017 | Corrosion behaviour of bismuth-containing gold thick-film electrodes
Junker, Nils; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Corrosion stability of Sialon-based materials in acids and basic solutions
Nickol, Alexander; Wolfrum, Anne-Kathrin; Kunz, Willy; Michaelis, Alexander; Herrmann, Mathias | Zeitschriftenaufsatz |
| 2017 | Crack detection of ceramics based on laser speckle photometry
Bendjus, Beatrice; Cikalova, Ulana; Chen, Lili | Zeitschriftenaufsatz |
| 2017 | Critical impact of chloride containing reference electrodes on electrochemical measurements
Lämmel, Christoph; Heubner, Christian; Liebmann, Tobias; Schneider, Michael | Zeitschriftenaufsatz |
| 2017 | Deep drawing of ceramic green tapes - A promising technology for producing new lightweight non-planar kiln furniture
Schwarzer, Eric; Scheithauer, Uwe; Brosche, Maximilian; Richter, Hans-Jürgen; Moritz, Tassilo | Zeitschriftenaufsatz |
| 2017 | Degradation of endocrine disruptor bisphenol A by ultrasound-assisted electrochemical oxidation in water
Dietrich, Matz; Franke, Marcus; Stelter, Michael; Bräutigam, Patrick | Zeitschriftenaufsatz |
| 2017 | Dependencies between internal structure and mechanical properties of spray dried granules - experimental study and DEM simulation
Eckhard, Susanna; Fries, Manfred; Antonyuk, Sergiy; Heinrich, Stefan | Zeitschriftenaufsatz |
| 2017 | Derivation and application of a generalized correlation for mass transfer in packed beds
Reichelt, Erik; Jahn, Matthias; Lange, Rüdiger | Zeitschriftenaufsatz |
| 2017 | Design and evaluation of a Fischer-Tropsch process for the production of waxes from biogas
Herz, Gregor; Reichelt, Erik; Jahn, Matthias | Zeitschriftenaufsatz |
| 2017 | Design and evaluation of a power-to-liquid process for the production of valuable hydrocarbons from CO2 and H2O
Herz, Gregor; Reichelt, Erik; Jahn, Matthias | Konferenzbeitrag |
| 2017 | Determination of defect sizes with the help of structural-health-monitoring methods based on guided waves
Tschöke, Kilian; Weihnacht, Bianca; Gaul, Tobias; Schulze, Eberhard; Schubert, Lars; Neubeck, Robert | Konferenzbeitrag |
| 2017 | Development and application of binary suspensions in the ternary system Cr2O3-TiO2-Al2O3 for S-HVOF spraying
Kratzsch, Robert; Potthoff, Annegret; Kulissa, Nick; Kunze, Oliver; Barbosa, Maria Manuel; Toma, Filofteia-Laura | Konferenzbeitrag |
| 2017 | Development of a highly efficient micro-scale CHP system based on fuel-flexible gasification and a SOFC
Brunner, Thomas; Ramerstorfer, Christian; Obernberger, Ingwald; Kerschbaum, Michael; Aravind, P.V.; Makkus, Robert; Megel, Stefan; Hauth, Martin; Seidl, Michael; Weißensteiner, Stefan; Götz, Thomas; Zappa, William | Konferenzbeitrag |
| 2017 | Development of a SOFC Power Generator for the Indian Market
Pfeifer, Thomas; Chakradeo, Amar; Ahire, Nitin; Baade, Jens; Barthel, Markus; Dosch, Christian; Näke, Ralf; Hartmann, Mathias | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2017 | Direct influence of titanium and zirconia particles on the morphology and functionality of mature human osteoclasts
Pasold, Juliane; Markhoff, Jana; Tillmann, Jenny; Krogull, Martin; Pisowocki, Phillip; Bader, Rainer | Zeitschriftenaufsatz |
| 2017 | Dispersion of nanomaterials in aqueous media: Towards protocol optimization
Kaur, Inder; Ellis, Laura-Jayne; Romer, Isabella; Tantra, Ratna; Carriere, Marie; Allard, Soline; Mayne-L'Hermite, Martine; Minelli, Caterina; Unger, Wolfgang; Potthoff, Annegret; Rades, Steffi; Valsami-Jones, Eugenia | Zeitschriftenaufsatz |
| 2017 | Doping of graphene induced by boron/silicon substrate
Dianat, Arezoo; Liao, Zhongquan; Gall, Martin; Zhang, Tao; Gutierrez, Rafael; Zschech, Ehrenfried; Cuniberti, Gianaurelio | Zeitschriftenaufsatz |
| 2017 | Droplet-based additive manufacturing of hard metal components by thermoplastic 3D printing (T3DP)
Scheithauer, Uwe; Pötschke, Johannes; Weingarten, Steven; Schwarzer, Eric; Vornberger, Anne; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Editorial
Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2017 | The effect of manufacturing conditions on discontinuity population and fatigue fracture behavior in carbon/epoxy composites
Hakim, I.; Laquai, R.; Walter, D.; Mueller, B.; Graja, P.; Meyendorf, N.; Donaldson, S. | Konferenzbeitrag |
| 2017 | Effect of membranes in exhaust particulate filtration
Adler, Jörg; Petasch, Uwe | Konferenzbeitrag |
| 2017 | Effect on the integration of piezoceramic composites into structural components on their poling condition and polarizability
Hohlfeld, Kai; Eßlinger, Sophia; Eydam, Agnes; Winkler, Anja; Weber, Tony; Gude, Maik; Modler, Niels; Gerlach, Gerald; Suchaneck, Gunnar; Michaelis, Alexander; Schönecker, Andreas; Gebhardt, Sylvia; Neumeister, Peter | Konferenzbeitrag |
| 2017 | Efficient hydrogen production on MoNi4 electrocatalysts with fast water dissociation kinetics
Zhang, Jian; Wang, Tao; Liu, Pan; Liao, Zhongquan; Liu, Shaohua; Zhuang, Xiaodong; Chen, Mingwei; Zschech, Ehrenfried; Feng, Xinliang | Zeitschriftenaufsatz |
| 2017 | Einfluss der Anwesenheit von faserigen Partikeln auf die Strömungsgeschwindigkeiten in gerührten Systemen
Lomtscher, Annett; Jobst, Karin; Kraume, Matthias | Zeitschriftenaufsatz |
| 2017 | Einsatz von strohartigen Biomassen in Biogasanlagen - Stand und Perspektiven
Schwarz, Björn; Fleschhut, Monika; Baye, Dietrich | Konferenzbeitrag |
| 2017 | Electrochemical Machining
Schneider, Michael; Lohrengel, Manuel | Aufsatz in Buch |
| 2017 | Electrochemical machining of a solid-state sintered ceramic - a parameter study
Schneider, Michael; Safonowa, Elena; Junker, Nils; Schubert, Nora; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Electrochemical studies of the ECM on chromium
Simunkova, Lenka; Schneider, Michael | Konferenzbeitrag |
| 2017 | Electrochemical surface modification of titanium based material with detonation nanodiamonds for implant applications
Shaikh, Afnan Qurban
: Cuniberti, Gianaurelio (Gutachter); Opitz, Jörg (Betreuer); Michaelis, Alexander (Gutachter) | Dissertation |
| 2017 | An embedded system for acoustic pattern recognition
Tschöpe, Constanze; Duckhorn, Frank; Richter, Christian; Blüthgen, Peter; Wolff, Matthias | Konferenzbeitrag |
| 2017 | Enabling energy efficiency and polarity control in germanium nanowire transistors by individually gated nanojunctions
Trommer, Jens; Heinzig, André; Mühle, Uwe; Löffler, Markus; Winzer, Annett; Jordan, Paul M.; Beister, Jürgen; Baldauf, Tim; Geidel, Marion; Adolphi, Barbara; Zschech, Ehrenfried; Mikolajick, Thomas; Weber, Walter Michael | Zeitschriftenaufsatz |
| 2017 | Enhancements on fast sintering systems promote transfer from the lab to industrial applications
Hennicke, Jürgen; Kessel, Tobias; Räthel, Jan | Konferenzbeitrag |
| 2017 | Entwicklung funktioneller Metall-Keramik-Verbundfolien unter Anwendung papiertechnologischer Verfahren
Slawik, Tim
: Michaelis, Alexander (Gutachter); Großmann, Harald J. (Gutachter); Aneziris, Christos G. (Gutachter) | Dissertation |
| 2017 | Entwicklung von Cr2O3-Hochleistungsschichten durch thermisches Spritzen mit Suspensionen
Toma, Filofteia-Laura; Potthoff, Annegret; Langner, Stefan; Kulissa, Nick; Trache, Richard | Zeitschriftenaufsatz |
| 2017 | Entwicklung von Cr2O3-Hochleistungsschichten durch thermisches Spritzen mit Suspensionen
Toma, Filofteia-Laura; Langner, Stefan; Kulissa, Nick; Trache, Richard; Potthoff, Annegret | Zeitschriftenaufsatz |
| 2017 | Entwicklungsperspektiven für Zellformate von Lithium-Ionen-Batterien in der Elektromobilität
Hettesheimer, Tim; Thielmann, Axel; Neef, Christoph; Möller, Kai-Christian; Wolter, Mareike; Lorentz, Vincent; Gepp, Markus; Wenger, Martin; Prill, Torben; Zausch, Jochen; Kitzler, Peter; Montnacher, Joachim; Miller, Martin; Hagen, Markus; Fanz, Patrik; Tübke, Jens | Studie |
| 2017 | Evaluation of soft chemistry methods to synthesize Gd-doped CaMnO3-δ with improved thermoelectric properties
Löhnert, Romy; Stelter, Michael; Töpfer, Jörg | Zeitschriftenaufsatz |
| 2017 | Experimental determination of the Young's modulus of various electronic packaging materials
Krämer, Frank; Röllig, Mike; Metasch, René; Wiese, Steffen; Al Ahmar, Joseph; Meier, Karsten | Konferenzbeitrag |
| 2017 | Experimental investigation on adsorption and surface characteristics of salt hydrates and hydrophobic porous matrix based composites
Laß-Seyoum, Asnakech; Borozdenko, D.; Friedrich, T.; Schönfeld, Katrin; Adler, Jörg; Mack, S. | Zeitschriftenaufsatz |
| 2017 | Extraction of depth profiles of third order elastic constants in cracked media
Rjelka, Marek; Köhler, Bernd; Mayer, Andreas | Konferenzbeitrag |
| 2017 | Extrusion and tape casting based production of new lightweight kiln furniture with non-planar surface
Scheithauer, Uwe; Schwarzer, Eric; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Konferenzbeitrag |
| 2017 | Extrusionsverfahren und Extrusionsvorrichtung zur Herstellung eines mit einem Boden verschlossenen Keramikrohres
Hofacker, Martin; Kiesel, Lutz | Patent |
| 2017 | Fabrication of a transversal multilayer thermoelectric generator with substituted calcium manganite
Reimann, Timmy; Bochmann, Arne; Vogel, Andy; Capraro, Beate; Teichert, Steffen; Töpfer, Jörg | Zeitschriftenaufsatz |
| 2017 | FAST/Flash: A combination of FAST/SPS and flash sintering
Räthel, Jan; Herrmann, Mathias; Hennicke, Jürgen; Kirchner, René | Vortrag |
| 2017 | Fatigue measurement setup under combined thermal and vibration loading on electronic SMT assembly
Meier, Karsten; Metasch, René; Röllig, Mike; Bock, Karlheinz | Konferenzbeitrag |
| 2017 | Festkörperaktoren mit neuen Eigenschaften auf der Basis von magnetischen Formgedächtnislegierungen
Neubert, Holger; Böhm, Andrea | Zeitschriftenaufsatz |
| 2017 | Fischer-Tropsch to higher alcohols
Schaller, Max Rudolf; Reichelt, Erik; Fischer, Nico; Claeys, Michael; Jahn, Matthias | Konferenzbeitrag |
| 2017 | Fraunhofer Institute for Ceramic Technologies and Systems. Annual Report 2016/2017
| Jahresbericht |
| 2017 | Fraunhofer-Institut für Keramische Technologien und Systeme. Jahresbericht 2016/2017
| Jahresbericht |
| 2017 | From the sea to the laboratory: Characterization of microplastic as prerequisite for the assessment of ecotoxicological impact
Potthoff, Annegret; Oelschlägel, Kathrin; Schmitt-Jansen, Mechthild; Rummel, Christoph Daniel; Kühnel, Dana | Zeitschriftenaufsatz |
| 2017 | Funktionalisierte 3D-Keramikkomponenten durch Kombination von Mehrlagenkeramik und Keramikspritzguss
Ziesche, Steffen; Lenz, Christian; Müller-Köhn, Axel | Konferenzbeitrag |
| 2017 | Fused-Filament-Fabrication (FFF): A promising technique for large ceramic parts made of a variety of materials - challenges, approaches, perspectives
Abel, Johannes; Scheithauer, Uwe; Klemm, Hagen; Moritz, Tassilo; Michaelis, Alexander | Vortrag |
| 2017 | Generalized correlations for mass transfer and pressure drop in fiber-based catalyst supports
Reichelt, Erik; Jahn, Matthias | Zeitschriftenaufsatz |
| 2017 | Generative Fertigung von Sinterglaskörpern für Glasdurchführungen durch 3D-Drucken
Nicolai, Katja
: Rädlein, Edda (Akademischer Betreuer); Michaelis, Alexander (Gutachter); Bergmann, Jean Pierre (Gutachter) | Dissertation |
| 2017 | Glass-carbon-composites for heating elements manufactured by 2C-PIM
Mannschatz, Anne; Müller-Köhn, Axel; Rost, Axel; Schilm, Jochen; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Grain growth inhibition in ultrafine hardmetals
Pötschke, Johannes; Richter, Volkmar; Gestrich, Tim; Säuberlich, Tino; Meese-Marktscheffel, Juliane | Zeitschriftenaufsatz |
| 2017 | Grain Growth Inhibition of Hardmetals During Initial Heat-Up
Pötschke, Johannes; Gestrich, Tim; Richter, Volkmar | Konferenzbeitrag |
| 2017 | Greeting of the programming committee of the 93rd german ceramic society annual meeting and symposium on high-performance ceramics 2018
Michaelis, Alexander; Voigt, Ingolf; Zins, Michael | Abstract |
| 2017 | Herstellung und Charakterisierung piezokeramischer Komponenten und daraus abgeleiteter Piezokomposite
Hohlfeld, Kai
: Michaelis, Alexander (Gutachter); Drossel, Welf-Guntram (Gutachter); Gebhardt, Sylvia (Betreuer) | Dissertation |
| 2017 | Herstellung von funktionellen, hybriden keramik-basierten Komponenten durch Kombination additiver und konventioneller Fertigungsverfahren
Scheithauer, Uwe; Schwarzer, Eric; Günther, Paul; Ahlhelm, Matthias; Gradmann, Rena; Pohl, Markus; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Konferenzbeitrag |
| 2017 | Hierarchical structures of functionalized Detonation NanoDiamonds (DNDs) for biomedical applications
Dennison, Nicholas Robert
: Opitz, Jörg (Betreuer); Römhildt, Lotta (Betreuer) | Master Thesis |
| 2017 | Hierarchical surface patterning of Ni- and Be-free Ti- and Zr-based bulk metallic glasses by thermoplastic net-shaping
Sarac, Baran; Bera, Supriya; Balakin, Sascha; Stoica, Mihai; Cǎlin, Mariana; Eckert, Jürgen | Zeitschriftenaufsatz |
| 2017 | High pressure adsorption, permeation and swelling of carbon membranes - measurements and modelling at up to 20 MPa
Kruse, Nicolas; Schießer, Yuliya; Reger-Wagner, Norman; Richter, Hannes; Voigt, Ingolf; Braun, Gerd; Repke, Jens Uwe | Zeitschriftenaufsatz |
| 2017 | High-flux carbon molecular sieve membranes for gas separation
Richter, Hannes; Voss, Hartwig; Kaltenborn, Nadine; Kämnitz, Susanne; Wollbrink, Alexander; Feldhoff, Armin; Caro, Jürgen; Roitsch, Stefan; Voigt, Ingolf | Zeitschriftenaufsatz |
| 2017 | Highest UV-vis transparency of MgAl2O4 spinel ceramics prepared by hot pressing with LiF
Wätzig, Katja; Hutzler, Thomas | Zeitschriftenaufsatz |
| 2017 | Hot gas stability of various ceramic matrix composites
Klemm, Hagen; Kunz, Willy; Wamser, T.; Rüdinger, Arne; Weiss, R.A.; Lauer, A.; Wilhelmi, C.; Machry, T.; Hofmann, S.; Koch, D. | Konferenzbeitrag |
| 2017 | Human α-thrombin detection platform using aptamers on a silicon nanowire field-effect transistor
Römhildt, Lotta; Zörgiebel, Felix; Ibarlucea, Bergoi; Vahdatzadeh, Maryam; Baraban, Larysa; Cuniberti, Gianaurelio; Pregl, Sebastian; Weber, Walter M.; Mikolajick, Thomas; Opitz, Jörg | Konferenzbeitrag |
| 2017 | HVOF- and HVAF-sprayed Cr3C2-NiCr coatings deposited from feedstock powders of spherical morphology: Microstructure formation and high-stress abrasive wear resistance up to 800 °C
Janka, Leo; Norpoth, Jonas; Trache, Richard; Thiele, Sven; Berger, Lutz-Michael | Zeitschriftenaufsatz |
| 2017 | Hybride Materialmodellierung für ferroelektroelastische Keramiken
Stark, Sebastian
: Balke, Herbert (Gutachter); Kuna, Meinhard (Gutachter); Michaelis, Alexander (Promotionskommission) | Dissertation |
| 2017 | Implementierung eines Sintermodells in ANSYS
Stark, Sebastian; Neumeister, Peter | Vortrag |
| 2017 | The importance of shear thinning, thixotropic and viscoelastic properties of thick film pastes to predict effects on printing performance
Reinhardt, Kathrin; Hofmann, Nancy; Eberstein, Markus | Konferenzbeitrag |
| 2017 | In-situ preparation and electrochemical characterization of submicron sized NaFePO4 cathode material for sodium-ion batteries
Heubner, Christian; Heiden, Sebastian; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | In-Situ Stretching Patterned Graphene Nanoribbons in the Transmission Electron Microscope
Liao, Zhongquan; Sandonas, Leonardo Medrano; Zhang, Tao; Gall, Martin; Dianat, Arezoo; Gutierrez, Rafael; Mühle, Uwe; Gluch, Jürgen; Jordan, Rainer; Cuniberti, Gianaurelio; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2017 | In-Situ Transmission Electron Microscopy Studies on Advanced Materials for Micro- and Nano-Electronics
Liao, Zhongquan
: Zschech, Ehrenfried (Gutachter); Cuniberti, Gianaurelio (Gutachter); Wolf, Ingrid de (Gutachter) | Dissertation |
| 2017 | Industrielle Reststoffe dreifach nutzen
Wufka, A.; Weile, F.; Münch, C.; Müller, P.; Georgi, H. | Zeitschriftenaufsatz |
| 2017 | Influence of C content on electrochemical corrosion resistance of nanostructured hardmetals
Fabijanic, T.A.; Pötschke, J.; Alar, V.; Alar, Ž. | Konferenzbeitrag |
| 2017 | Influence of carbon source and synthesis temperature on structural and morphological properties of carbon nanofibers synthesized on tubular porous ZrO2 layers
Simon, Adrian; Seyring, Martin; Reger-Wagner, Norman; Richter, Hannes; Voigt, Ingolf; Rettenmayr, Markus; Ritter, Uwe | Zeitschriftenaufsatz |
| 2017 | Influence of feedstock powder modification by heat treatments on the properties of APS-sprayed Al2O3-40%TiO2 coatings
Berger, Lutz-Michael; Vaßen, Robert; Sohn, Yoo Jung | Konferenzbeitrag |
| 2017 | Influence of post-treatment on the microstructural and tribomechanical properties of suspension thermally sprayed WC-12 wt%Co nanocomposite coatings
Ali, O.; Ahmed, R.; Faisal, N.H.; Alazani, N.M.; Berger, Lutz-Michael; Kaiser, Arno; Toma, Filofteia-Laura; Polychroniadis, E.K.; Sall, M.; Elakwah, Y.O.; Goosen, M.F.A. | Zeitschriftenaufsatz |
| 2017 | Influence of temperature and steam content on degradation of metallic interconnects in reducing atmosphere
Folgner, Christoph; Sauchuk, Viktar; Kusnezoff, Mihails; Michaelis, Alexander | Konferenzbeitrag |
| 2017 | Influence of the anode graphite particle size on the SEI film formation in lithium-ion cells
Reinke, Christian; Nikolowski, Kristian; Wolter, Mareike; Michaelis, Alexander | Aufsatz in Buch |
| 2017 | Insights into the buffer effect observed in blended lithium insertion electrodes
Heubner, Christian; Liebmann, Tobias; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Integration of piezoceramic composites in aluminium die casting structures and their functional characterization
Rhein, Sebastian; Wedler, Jonathan; Stein, Stefan; Körner, Carolin; Schmidt, Michael; Michaelis, Alexander; Gebhardt, Sylvia | Konferenzbeitrag |
| 2017 | Integrierte Strukturüberwachung sicherheitsrelevanter Fahrzeugkomponenten aus kohlefaserverstärkten Kunststoffverbundwerkstoffen
Tschöke, Kilian; Gaul, Tobias; Dungern, Friedrich von; Schubert, Lars | Konferenzbeitrag |
| 2017 | Integrierte Versuchsmethode zur Analyse des Matrizenfüllprozesses beim uniaxialen Trockenpressen
Glöß, Bianca; Fries, Manfred; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Intelligent signal processing on a miniaturized hardware module
Tschöpe, Constanze; Duckhorn, Frank; Richter, Christian; Blüthgen, Peter; Wolff, Matthias | Konferenzbeitrag |
| 2017 | Intense red-green up-conversion emission and their mechanisms of SrO: Er3+/Yb3+, Gd3+, Lu3+, Bi3+
Fu, Jipeng; Pang, Ran; Jia, Yonglei; Sun, Wenzhi; Jiang, Lihong; Zhang, Su; Li, Chengyu | Zeitschriftenaufsatz |
| 2017 | Interaction with spectral consequences between TM+ type cations located in oxide glass hosts
Goldstein, Adrian; Vulfson, Marina; Shames, Alex; Katz, Michael; Räthel, Jan | Zeitschriftenaufsatz |
| 2017 | Interconnect Corrosion in Steam Containing Fuel Gas
Folgner, Christoph; Sauchuk, Viktar; Megel, Stefan; Kusnezoff, Mihails; Michaelis, Alexander | Konferenzbeitrag |
| 2017 | Interplay between wet-dry-cycles and corrosion initiation due to chloride accumulation on AA1050 - A simple experimental approach
Schneider, M.; Ferl, S.; Langklotz, U. | Konferenzbeitrag |
| 2017 | Investigations of burning phenomena during the hard anodising of aluminium by local in-operando temperature measurements
Lämmel, Christoph; Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Ionically conductive polymer/ceramic separator for lithium-sulfur batteries
Freitag, Anne; Langklotz, Ulrike; Rost, Axel; Stamm, Manfred; Ionov, Leonid | Zeitschriftenaufsatz |
| 2017 | Iridium nanoparticles anchored on 3D graphite foam as a bifunctional electrocatalyst for excellent overall water splitting in acidic solution
Zhang, Jian; Wang, Gang; Liao, Zhongquan; Zhang, Panpan; Wang, Faxing; Zhuang, Xiaodong; Zschech, Ehrenfried; Feng, Xinliang | Zeitschriftenaufsatz |
| 2017 | Kombination aktiver Werkstoffe und additiver Fertigung für alternative Implantatkonzepte
Rotsch, Christian; Töppel, Thomas; Gille, Katarina; Hunger, Sandra; Werner, Michael; Müller, Bernhard; Lausch, Holger | Vortrag |
| 2017 | A laser speckle photometry based non-destructive method for measuring stress conditions in direct-copper-bonded ceramics for power electronic application
Münch, Stefan; Röllig, Mike; Cikalova, Ulana; Bendjus, Beatrice; Chen, Lili; Lautenschläger, Georg; Sudip, Shohag Roy | Konferenzbeitrag |
| 2017 | Laser-based functionalization of electronic multi-material-layers for embedded sensors
Vedder, Christian; Wollgarten, Susanne; Gradmann, Rena; Stollenwerk, Jochen Hugo; Wissenbach, Konrad; Eberstein, Markus | Zeitschriftenaufsatz |
| 2017 | Lifetime vs. rate capability: Understanding the role of FEC and VC in high-energy Li-ion batteries with nano-silicon anodes
Jaumann, Tony; Balach, Juan; Langklotz, Ulrike; Sauchuk, Viktar; Fritsch, Marco; Teltevskij, Valerij; Oswald, Steffen; Klose, Markus; Stephani, Günter; Hauser, Ralf; Michaelis, Alexander; Eckert, Jürgen; Giebeler, Lars | Zeitschriftenaufsatz |
| 2017 | Lithium loss indicated formation of microcracks in LATP ceramics
Wätzig, Katja; Rost, Axel; Langklotz, Ulrike; Schilm, Jochen | Konferenzbeitrag |
| 2017 | Lithography-based ceramic manufacturing (LCM) - Viscosity and cleaning as two quality influencing steps in the process chain of printing green parts
Schwarzer, Eric; Götz, Michael; Markova, D.; Stafford, D.; Scheithauer, Uwe; Moritz, Tassilo | Zeitschriftenaufsatz |
| 2017 | Low ppm failure analysis for advanced Cu and Cu alloy on-chip wiring
Kraatz, Matthias; Hauschildt, Meike; Gall, Martin; Zschech, Ehrenfried | Konferenzbeitrag |
| 2017 | Low temperature stability of 4O martensite in Ni49.1Mn38.9Sn12 metamagnetic Heusler alloy ribbons
Czaja, Paweł; Przewoźnik, Janusz; Gondek, Łukasz; Hawełek, Łukasz; Żywczak, Antoni; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2017 | Macro-mixing characterisation of a stirred model fermenter of non-Newtonian liquid by flow following sensor particles and ERT
Reinecke, Sebastian; Deutschmann, Anne; Jobst, Karin; Hampel, Uwe | Zeitschriftenaufsatz |
| 2017 | Manufacturing and properties of tungsten carbide-oxide composites
Vornberger, Anne; Pötschke, Johannes; Berger, Christian | Konferenzbeitrag |
| 2017 | Material- and process hybridization for multifunctional ceramic and glass components
Moritz, Tassilo; Scheithauer, Uwe; Mannschatz, Anne; Ahlhelm, Matthias; Abel, Johannes; Schwarzer, Eric; Pohl, Markus; Müller-Köhn, Axel | Zeitschriftenaufsatz |
| 2017 | Mehrlagenkeramik und Keramikspritzguss
Ziesche, Steffen; Lenz, Christian; Müller-Köhn, Axel | Zeitschriftenaufsatz |
| 2017 | Metal uptake and distribution in the zebrafish (Danio rerio) embryo: Differences between nanoparticles and metal ions
Böhme, Steffi; Baccaro, Marta; Schmidt, Matthias; Potthoff, Annegret; Stärk, Hans-Joachim; Reemtsma, Thorsten; Kühnel, Dana | Zeitschriftenaufsatz |
| 2017 | Metall-keramische Verbundwerkstoffe: Papiertechnologische Verfahren zur Herstellung metall-keramischer Verbundwerkstoffe
Zelm, Roland; Greiffenberg, Ina; Wagenführ, André; Moritz, Tassilo; Günther, Anne; Michaelis, Alexander; Slawik, Tim | Zeitschriftenaufsatz |
| 2017 | Method for the development of realistic boundary conditions for the simulation of non-contact tonometry
Münch, Stefan; Balzani, Daniel; Röllig, Mike; Spörl, Eberhard | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2017 | Micro-patterning by thermoplastic forming of Ni-free Ti-based bulk metallic glasses
Bera, Supriya; Sarac, Baran; Balakin, Sascha; Ramasamy, Parthiban; Stoica, Mihai; Cǎlin, Mariana; Eckert, Jürgen | Zeitschriftenaufsatz |
| 2017 | Microelectrochemical investigation of anodic oxide formation on the aluminum alloy AA2024
Schneider, Michael; Liebmann, Tobias; Langklotz, Ulrike; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Micropatterning kinetics of different glass-forming systems investigated by thermoplastic net-shaping
Sarac, Baran; Bera, Supriya; Spieckermann, Florian; Balakin, Sascha; Stoica, Mihai; Cǎlin, Mariana; Eckert, Jürgen | Zeitschriftenaufsatz |
| 2017 | Microstructural characteristics and performances of Cr2O3 and Cr2O3-15%TiO2 S-HVOF coatings obtained from water-based suspensions
Toma, Filofteia-Laura; Kulissa, Nick; Langner, Stefan; Potthoff, Annegret; Barbosa, Maria M.; Leyens, Christoph | Konferenzbeitrag |
| 2017 | Microstructural evolution during sintering of cermets studied using interrupted sintering experiments and novel 2D and 3D FESEM based techniques
Pötschke, Johannes; Höhn, Sören; Richter, Volkmar; Mayer, Markus | Zeitschriftenaufsatz |
| 2017 | Microstructural investigation of diamond-SiC composites produced by pressureless silicon infiltration
Matthey, Björn; Höhn, Sören; Wolfrum, Anne-Kathrin; Mühle, Uwe; Motylenko, Mykhaylo; Rafaja, David; Michaelis, Alexander; Herrmann, Mathias | Zeitschriftenaufsatz |
| 2017 | Miniaturised flame ionisation detector for explosion protection in civil sewerage networks
Förster, Jan; Kuipers, Winfred; Koch, Christian; Lenz, Christian; Ziesche, Steffen; Jurkow, Dominik | Konferenzbeitrag |
| 2017 | Monitoring of welded seams on the foundations of offshore wind turbines
Weihnacht, Bianca; Frankenstein, Bernd; Gaul, Tobias; Neubeck, Robert; Schubert, Lars | Zeitschriftenaufsatz |
| 2017 | A multi technique study of a new lithium disilicate glass-ceramic spray-coated on ZrO2 substrate for dental restoration
Möncke, Doris; Ehrt, Roland; Palles, Dimitrios; Efthimiopoulos, Ilias; Kamitsos, Efstratios I.; Johannes, Martina | Zeitschriftenaufsatz |
| 2017 | Multi-material approach to integrate ceramic boxed sensors and actuators in laser beam melted structures for tailored smart bio applications
Lausch, Holger; Töppel, Thomas; Brand, Michael; Hensel, Eric; Arnold, Michael; Rotsch, Christian; Gronde, Bernd | Vortrag |
| 2017 | Novel ceramic composites for personalized 3D-structures
Ahlhelm, Matthias; Schwarzer, Eric; Scheithauer, Uwe; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Novel thermocouples for temperature measurement in automotive applications
Gierth, Paul; Rebenklau, Lars; Augsburg, Klaus; Niedermeyer, Lars; Bachmann, Eric | Konferenzbeitrag |
| 2017 | Optimization of ESC performance for co-electrolysis operation
Trofimenko, Nikolai; Kusnezoff, Mihails; Michaelis, Alexander | Konferenzbeitrag |
| 2017 | Optimization of the temperature program to scale up the stabilization of polyacrylonitrile fibers
Meinl, Juliane; Schönfeld, Katrin; Kirsten, Martin; Kittler, Karsten; Michaelis, Alexander; Cherif, Chokri | Zeitschriftenaufsatz |
| 2017 | Pan-European inter-laboratory studies on a panel of in vitro cytotoxicity and pro-inflammation assays for nanoparticles
Piret, Jean-Pascal; Bondarenko, Olesja M.; Boyles, Matthew S.P.; Himly, Martin; Ribeiro, Ana R.; Benetti, Federico; Smal, Caroline; Lima, Braulio; Potthoff, Annegret; Simion, Monica; Dumortier, Elise; Leite, Paulo Emilio C.; Balottin, Luciene Bottentuit; Granjeiro, José Mauro; Ivask, Angela; Kahru, Anne; Radauer-Preiml, Isabella; Tischler, Ulrike; Duschl, Albert; Saout, Christelle; Anguissola, Sergio; Haase, Andrea; Jacobs, An; Nelissen, Inge; Misra, Superb K.; Toussaint, Olivier | Zeitschriftenaufsatz |
| 2017 | Particle reinforced open porous anodizing layers on AA5005
Schneider, Michael; Kremmer, Kerstin; Weidmann, Stefanie; Fürbeth, Wolfram | Zeitschriftenaufsatz |
| 2017 | Phase transformation in AFM silicon tips
Kopycinska-Müller, Malgorzata; Barth, Martin; Küttner, Martin; Köhler, Bernd | Zeitschriftenaufsatz |
| 2017 | Physikalische Werkstoffdiagnostik
Bauch, Jürgen; Rosenkranz, Rüdiger | Buch |
| 2017 | Point focusing with flat and wedged crossed multilayer Laue lenses
Kubec, Adam; Melzer, Kathleen; Gluch, Jürgen; Niese, Sven; Braun, Stefan; Patommel, Jens; Burghammer, Manfred; Leson, Andreas | Zeitschriftenaufsatz |
| 2017 | Precursor-basierte Darstellung von Magnéli-Phasen TinO2n-1 für die Anwendung als Thermeoelektrikum
Conze, Susan
: Grin, Juri (Gutachter); Michaelis, Alexander (Gutachter); Kinski, Isabel (Betreuer) | Dissertation |
| 2017 | Preface - Journal of Ceramic Science and Technology 1/2017. Special Issue, 6th International Congress on Ceramics (ICC6)
Michaelis, A. | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2017 | Preparation and TEM characterization of interfaces in co-sintered metal-ceramic composites
Mühle, Uwe; Günther, Anne; Standke, Yvonne; Moritz, Tassilo; Gluch, Jürgen; Zschech, Ehrenfried | Poster |
| 2017 | Pressureless sintering of ZrC with variable stoichiometry
Schönfeld, Katrin; Martin, Hans-Peter; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | A process chain for integrating piezoelectric transducers into aluminum die castings to generate smart lightweight structures
Stein, Stefan; Wedler, Jonathan; Rhein, Sebastian; Schmidt, Michael; Körner, Carolin; Michaelis, Alexander; Gebhardt, Sylvia | Zeitschriftenaufsatz |
| 2017 | Quantitative crystallographic analysis of individual carbon nanofibers using high resolution transmission electron microscopy and electron diffraction
Seyring, Martin; Simon, Adrian; Voigt, Ingolf; Ritter, Uwe; Rettenmayr, Markus | Zeitschriftenaufsatz |
| 2017 | Rate controlled sintering of binderless tungsten carbide
Hennicke, J.; Kessel, T.; Poetschke, J.; Vornberger, A. | Konferenzbeitrag |
| 2017 | Reconfigurable germanium transistors with low source-drain leakage for secure and energy-efficient doping-free complementary circuits
Trommer, Jens; Heinzig, André; Slesazeck, Stefan; Mühle, Uwe; Löffler, Markus; Walter, Dennis; Mayr, Christian Georg; Mikolajick, Thomas; Weber, Walter Michael | Konferenzbeitrag |
| 2017 | Reducing uncertainty and confronting ignorance about the possible impacts of weathering plastic in the marine environment
Jahnke, Annika; Potthoff, Annegret; Arp, Hans Peter H.; Escher, Beate I.; Gewert, Berit; Gorokhova, Elena; Kühnel, Dana; Ogonowski, Martin; Rummel, Christoph Daniel; Schmitt-Jansen, Mechthild; Toorman, Erik; MacLeod, Matthew | Zeitschriftenaufsatz |
| 2017 | Reversible heat generation rates of blended insertion electrodes
Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Review Article: Recommended reading list of early publications on atomic layer deposition - outcome of the "Virtual Project on the History of ALD"
Ahvenniemi, Esko; Akbashev, Andrew R.; Ali, Saima; Bechelany, Mikhael C.; Berdova, Maria; Boyadjiev, Stefan; Cameron, David; Chen, Rong; Chubarov, Mikhail; Cremers, Véronique; Devi, Anjana; Drozd, V.E.; El’nikova, Liliya; Gottardi, Gloria; Grigoras, Kestutis; Hausmann, Dennis; Hwang, Cheolseong; Jen, Shihhui; Kallio, Tanja; Kanervo, Jaana; Khmelnitskiy, Ivan; Kim, Dohan; Klibanov, Lev; Koshtyal, Yury; Krause, A. Outi; Kuhs, Jakob; Kärkkänen, Irina; Kääriäinen, Marja Leena; Kääriäinen, Tommi; Lamagna, Luca; Łapicki, Adam; Leskelä, Markku; Lipsanen, Harri; Aav, Jussi; Malkov, Anatoly; Malygin, Anatoly; Mennad, Abdelkader; Militzer, Christian; Molarius, Jyrki; Norek, Małgorzata; Ozgit-Akgun, Cagla; Panov, Mikhail; Pedersen, Henrik; Piallat, Fabien; Popov, Georgi; Puurunen, Riikka; Rampelberg, Geert; Ras, Robin; Rauwel, Erwan; Roozeboom, Fred; Sajavaara, Timo; Salami, Hossein; Savin, Hele; Schneider, Nathanaëlle; Seidel, Thomas E.; Sundqvist, Jonas; Suyatin, Dmitry B.; Törndahl, Tobias; Ommen, | Zeitschriftenaufsatz |
| 2017 | Riss- und Schadenssanierung von Betonwerkstein mittels Expansionstechnologie
Hoyer, Thomas | Aufsatz in Buch |
| 2017 | Sauerstoff-liefernde Keramiken für Verbrennungsprozesse
Kriegel, Ralf | Zeitschriftenaufsatz |
| 2017 | Scale-up of mixing processes of highly concentrated suspensions using electrical resistance tomography
Lomtscher, Annett; Jobst, Karin; Fogel, Stefan; Rostalski, Kay; Stempin, Silke; Kraume, Matthias | Zeitschriftenaufsatz |
| 2017 | Schichten aus Kohlenstoff-Nanomaterialien auf asymmetrisch porösen, keramischen Trägern und deren Erprobung für Anwendungen in Membrantechnik und Katalyse
Simon, Adrian
: Ritter, Uwe; Rädlein, Edda (Gutachter); Voigt, Ingolf (Gutachter); Michaelis, Alexander (Hrsg.) | Dissertation |
| 2017 | Self-healing EBC material for gas turbine applications
Kunz, Willy; Klemm, Hagen | Konferenzbeitrag |
| 2017 | Sensorfunktion im Faserverbund
Lätzsch, Hans-Joachim; Modler, Niels; Geller, Sirko; Weißenborn, Oliver; Röllig, Mike; Schwerz, Robert; Müller, Uwe; Sauer, Sebastian | Zeitschriftenaufsatz |
| 2017 | SiC-bonded diamond materials produced by pressureless silicon infiltration
Matthey, Björn; Herrmann, Mathias; Hörner, Martin; Geldern, Maike van; Kunze, Steffen; Blug, Bernhard; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Sinter kinetics and interface reactions of silver thick films on aluminium nitride
Marcinkowski, Manja; Schwab, Olga; Schmidt, Richard; Eberstein, Markus; Partsch, Uwe | Konferenzbeitrag |
| 2017 | A smart eddy current sensor dedicated to the nondestructive evaluation of carbon fibers reinforced polymers
Naidjate, Mohammed; Helifa, Bachir; Feliachi, Mouloud; Lefkaier, Iben-Khaldoun; Heuer, Henning; Schulze, Martin | Zeitschriftenaufsatz |
| 2017 | Solid state sintered nanoscaled hardmetals and their properties
Pötschke, Johannes; Säuberlich, Tino | Konferenzbeitrag |
| 2017 | State transition and electrocaloric effect of BaZrxTi1-xO3: Simulation and experiment
Ma, Yangbin; Molin, Christian; Shvartsman, Vladimir; Gebhardt, Sylvia; Lupascu, Doru Constantin; Albe, Karsten; Xu, Baixiang | Zeitschriftenaufsatz |
| 2017 | Structural integration of sensors / actuators by laser beam melting for tailored smart components
Töppel, Thomas; Lausch, Holger; Brand, Michael; Hensel, Eric; Arnold, Michael; Rotsch, Christian | Vortrag |
| 2017 | Structural relaxation phenomena in silicate glasses modified by irradiation with femtosecond laser pulses
Seuthe, Thomas; Mermillod-Blondin, Alexandre; Grehn, Moritz; Bonse, Jörn; Wondraczek, Lothar; Eberstein, Markus | Zeitschriftenaufsatz |
| 2017 | Study of a particle based films cure process by high-frequency eddy current spectroscopy
Patsora, Iryna; Heuer, Henning; Hillmann, Susanne; Tatarchuk, Dmitrii | Zeitschriftenaufsatz |
| 2017 | Study of WC- and Cr3C2-containing hardmetal compositions for thermal spray coatings
Berger, Lutz-Michael; Sassatelli, Paolo; Pötschke, Johannes; Puddu, Pietro | Konferenzbeitrag |
| 2017 | Synthese und Charakterisierung von Galliumoxidnitriden
Oberländer, Andreas
: Michaelis, Alexander (Gutachter); Huppertz, Hubert (Gutachter); Kinski, Isabel (Betreuer) | Dissertation |
| 2017 | Synthesis, formulation, rapid curing of particle-based inkjet/aerosol-jet printed films for electronic and sensory devices
Fritsch, Marco; Vinnichenko, Mykola; Sauchuk, Viktar; Trofimenko, Nikolai | Poster |
| 2017 | System zur drahtlosen Übertragung von Energie und/oder Signalen, der Wandlung der Energie und/oder Signale in andere Energieformen und/oder Signalformen sowie deren Applizierung und Detektion in peripheren Bereichen des Systems
Lausch, Holger; Brand, Michael; Arnold, Michael | Patent |
| 2017 | Ta-Ni- and Ti-Al-braze-alloys for high temperature stable ceramic - ceramic junctions
Roszeitis, Sven | Vortrag |
| 2017 | Target preparation and characterization of interfaces in co-sintered metal ceramic composites using imaging and analytical Transmission Electron Microscopy
Mühle, Uwe; Günther, Anne; Standke, Yvonne; Moritz, Tassilo; Herrmann, Mathias; Gluch, Jürgen; Zschech, Ehrenfried | Aufsatz in Buch |
| 2017 | Temperature induced compositional redistribution in blended insertion electrodes
Heubner, Christian; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Theranostische Implantate - Wie können sie die endoprothetische Versorgung in Zukunft unterstützen?
Rotsch, Christian; Lausch, Holger | Vortrag |
| 2017 | Thermal behaviour of cermets and hardmetals during debinding and sintering
Gestrich, Tim; Kaiser, Arno; Pötschke, Johannes; Meinl, Juliane; Höhn, Sören | Konferenzbeitrag |
| 2017 | Thermally induced metallurgical processes in Cr3C2-NiCr thermal spray coatings as a function of carbide dissolution
Matthews, Steven; Asadov, A.; Ruddell, S.; Berger, Lutz-Michael | Zeitschriftenaufsatz |
| 2017 | Thermoelektrische Messvorrichtung und ihre Verwendung
Wodtke, Axel; Niedermeyer, Lars; Augsburg, Klaus; Bechtold, Franz; Rebenklau, Lars; Irrgang, Klaus; Lippmann, Lutz | Patent |
| 2017 | Thermoelektrisches Element sowie ein Verfahren zu dessen Herstellung
Rebenklau, Lars; Gierth, Paul; Wodtke, Axel; Niedermeyer, Lars; Augsburg, Klaus | Patent |
| 2017 | Towards an autarkic embedded cognitive user interface
Duckhorn, Frank; Huber, Markus; Meyer, Werner; Jokisch, Oliver; Tschöpe, Constanze; Wolff, Matthias | Konferenzbeitrag |
| 2017 | Towards next-generation sequencing-based identification of norovirus recognition elements and microfluidic array using phage display technology
Pahlke, Claudia
: Vollmer, Günter (1. Prüfer); Cuniberti, Gianaurelio (2. Prüfer); Opitz, Jörg (Betreuer); Baraban, Larysa (Betreuer); Szardenings, Michael (Betreuer) | Dissertation |
| 2017 | Ultraschallbasierte Analyse des Lagenaufbaus von CFK
Meyer, Jean
: Heuer, Henning (Betreuer) | Dissertation |
| 2017 | Untersuchung der Hydrodynamik von ovalen Biogasreaktoren mit instrumentierten Strömungsfolgern
Reinecke, Sebastian Felix; Jobst, Karin; Hampel, Uwe | Zeitschriftenaufsatz |
| 2017 | Untersuchung der Hydrodynamik von ovalen Biogasreaktoren mit instrumentierten Strömungsfolgern. Corrigendum
Reinecke, Sebastian; Jobst, Karin; Hampel, Uwe | Zeitschriftenaufsatz |
| 2017 | Untersuchung des Anwendungspotenzials der Hochfrequenzwirbelstrommesstechnik zur Charakterisierung dielektrischer Eigenschaften von Epoxidharzen und Faserverbundmaterialien
Gäbler, Simone
: Heinrich, Gert (Betreuer); Heuer, Henning (Betreuer) | Dissertation |
| 2017 | Untersuchungen an zugfesten Pressverbindungen für Fahrleitungsanlagen
Schlegel, Stephan; Pfeifer, Stephanie; Großmann, Steffen; Herzog, Thomas; Walter, Susan; Heuer, Henning; Kurzweil, Franz | Zeitschriftenaufsatz |
| 2017 | Validation of different SAC305 material models calibrated on isothermal tests using in-situ TMF measurement of thermally induced shear load
Kuczynska, Marta; Schafet, Natalja; Becker, Ulrich; Metasch, René; Röllig, Mike; Kabakchiev, Alexander; Weihe, Stefan | Konferenzbeitrag |
| 2017 | Verbundkörper mit mindestens einer Funktionskomponente und ein Verfahren zur Herstellung eines Verbundkörpers
Lausch, Holger; Herrmann, Mathias; Gronde, Bernd; Töppel, Thomas; Petters, Romy | Patent |
| 2017 | Verdeckte Fehleranzeigen erkennen
Heilmann, Stephan; Maaß, Michael | Zeitschriftenaufsatz |
| 2017 | Verfahren und Vorrichtung zum Betrieb einer Gasturbine mit nasser Verbrennung
Kriegel, Ralf | Patent |
| 2017 | Verfahren zur Bestimmung einer Strahlendosis und Produkt
Schuster, Christiane; Härtling, Thomas | Patent |
| 2017 | Verfahren zur Produktkontrolle und Produktkörper
Härtling, Thomas | Patent |
| 2017 | Verfahren zur Trockenbeschichtung von Trägern
Hoffmann, Robert; Jäger, Benjamin; Pippardt, Ute; Vogel, Andy | Patent |
| 2017 | Verification and characterization of an alternative low density lipoprotein receptor-related protein 1 splice variant
Kolb, Marlen; Kurz, Susanne; Schäfer, Angelika; Huse, Klaus; Dietz, Andreas; Wichmann, Gunnar; Birkenmeier, Gerd | Zeitschriftenaufsatz |
| 2017 | Visualization of the internal structure of Didymosphenia geminata frustules using nano X-ray tomography
Zglobicka, Izabela; Li, Qiong; Gluch, Jürgen; Płocińska, Magdalena; Noga, Teresa; Dobosz, Romuald; Szoszkiewicz, Robert; Witkowski, Andrzej; Zschech, Ehrenfried; Kurzydłowski, Krzysztof J. | Zeitschriftenaufsatz |
| 2017 | Volume imaging NDE and serial sectioning of carbon fiber composites
Hakim, Issa; Schumacher, David; Sundar, Veeraraghavan; Donaldson, Steven L.; Creuz, Aline; Schneider, Rainer; Keller, Juergen; Browning, Charles E.; May, Daniel; Ras, Mohamad Abo; Meyendorf, Norbert G.H. | Konferenzbeitrag |
| 2017 | Vorrichtung und Verfahren zur Behandlung von Abgasen in Einzelraumfeuerungsanlagen
Adler, Jörg; Petasch, Uwe; Haase, Daniela; Hark, Werner; Hark, Udo | Patent |
| 2017 | Vorrichtung und Verfahren zur Bestimmung eines medizinischen Gesundheitsparameters eines Probanden mittels Stimmanalyse
Saeltzer, Gerhard; Tschöpe, Constanze; Wolff, Matthias | Patent |
| 2017 | Waste heat energy harvesting by use of BaTiO3 for pyroelectric hydrogen generation
Belitz, R.; Meisner, P.; Coeler, Matthias; Wunderwald, U.; Friedrich, Jochen; Zosel, J.; Schelter, Matthias; Jachalke, Sven; Mehner, Erik | Zeitschriftenaufsatz |
| 2017 | WEATHER-MIC - How microplastic weathering changes its transport, fate, and toxicity in the marine environment
Jahnke, Annika; MacLeod, Matthew; Potthoff, Annegret; Toorman, Erik; Arp, Hans Peter H. | Konferenzbeitrag |
| 2017 | Wettability of tungsten carbide by liquid binders in WC-Co cemented carbides: Is it complete for all carbon contents?
Konyashin, Igor; Zaitsev, Alexander A.; Sidorenko, Daria A.; Levashov, Evgeny A.; Ries, Bernd; Konischev, S.N.; Sorokin, M.; Mazilkin, Andrei A.; Herrmann, Mathias; Kaiser, Arno | Zeitschriftenaufsatz |
| 2017 | Why not using ceramics - trends from ceramics research
Stepanyan, Marina; Seifert, Gerhard; Weiß, Torsten; Klein, Tiago Borsoi; Freund, Susanne | Zeitschriftenaufsatz |
| 2017 | Zeolite membranes: Functionalizing of properties by tailored compositions
Richter, Hannes; Weyd, Marcus; Simon, Adrian; Kühnert, Jan-Thomas; Günther, Christiane; Voigt, Ingolf; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2017 | Zirkonoxid-Keramik, zellularer Werkstoff daraus und Verfahren zur Herstellung der Zirkonoxid-Keramik
Adler, Jörg; Haase, Daniela; Standke, Gisela | Patent |
| 2016 | 2-D crossed-electrode transducer arrays for ultrasonic particle manipulation
Wang, Han; Qiu, Yongqiang; Démoré, Christine; Gebhardt, Sylvia; Cochran, Sandy | Konferenzbeitrag |
| 2016 | Active electrocaloric demonstrator for direct comparison of PMN-PT bulk and multilayer samples
Blumenthal, Philipp; Molin, Christian; Gebhardt, Sylvia; Raatz, Annika | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2016 | Adaption of functional ceramic materials for the laser sintering process in integrated sensor applications
Gradmann, Rena; Seuthe, Thomas; Vedder, Christian; Eberstein, Markus; Partsch, Uwe | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2016 | Adaption of functional ceramic materials for the laser sintering process in integrated sensor applications
Gradmann, Rena; Seuthe, Thomas; Vedder, Christian; Eberstein, Markus; Partsch, Uwe | Zeitschriftenaufsatz |
| 2016 | Additive Herstellung keramischer und metall-keramischer Bauteile
Scheithauer, Uwe; Schwarzer, Eric; Gradmann, Rena; Pohl, Markus; Moritz, Tassilo; Eberstein, Markus; Michaelis, Alexander | Poster |
| 2016 | Additive Herstellung mehrkomponentiger metallischer und keramischer Bauteile mittels thermoplastischen 3D-Druckes (T3DP)
Härtel, Anja; Scheithauer, Uwe; Schwarzer, Eric; Weingarten, Steven; Slawik, Tim; Richter, Hans-Jürgen; Moritz, Tassilo | Zeitschriftenaufsatz |
| 2016 | Additive Manufacturing and Strategic Technologies in Advanced Ceramics
: Shimamura, Kiyoshi (Ed.); Kirihara, Soshu (Ed.); Akedo, Jun (Ed.); Ohji, Tatsuki (Ed.); Naito, Makio (Ed.); Singh, Mrityunjay (Vol. Ed.); Ohji, Tatsuki (Vol. Ed.); Michaelis, Alexander (Vol. Ed.) | Tagungsband |
| 2016 | Additive manufacturing of ceramic components using powder bed and suspension methods
Richter, Hans-Jürgen; Moritz, Tassilo; Scheithauer, Uwe; Ahlhelm, Matthias; Schwarzer, Eric | Zeitschriftenaufsatz |
| 2016 | Advanced and Refractory Ceramics for Energy Conservation and Efficiency
: Lin, Hua-Tay (Ed.); Hemrick, James (Ed.); Singh, Mrityunjay (Vol. Ed.); Ohji, Tatsuki (Vol. Ed.); Michaelis, Alexander (Vol. Ed.) | Tagungsband |
| 2016 | Advances in solid oxide fuel cells and electronic ceramics
: Bansal, Narottam P. (Ed.); Kusnezoff, Mihails (Ed.); Shimamura, Kiyoshi (Ed.) | Tagungsband |
| 2016 | Aktivlöten von Keramik: Erhitzungsmikroskopie und komplexe thermische Analyse in hochreinen Atmosphären
Gestrich, Tim; Kaiser, Arno; Meinl, Juliane; Schilm, Jochen; Linseis, Florian; Seibt, Sebastian; Gollner, Michael | Zeitschriftenaufsatz |
| 2016 | Al in ZnO - from doping to alloying. An investigation of Al electrical activation in relation to structure and charge transport limits
Cornelius, Steffen; Vinnichenko, Mykola | Zeitschriftenaufsatz |
| 2016 | Amorphous, turbostratic and crystalline carbon membranes with hydrogen selectivity
Wollbrink, Alexander; Volgmann, Kai; Koch, Jason A.; Kanthasamy, Karthiga; Tegenkamp, Christoph; Li, Yun; Richter, Hannes R.; Kämnitz, Susanne; Steinbach, Frank; Feldhoff, Armin; Caro, Jürgen | Zeitschriftenaufsatz |
| 2016 | Autartec®-Systeme zur dezentralen Wasseraufbereitung
Faßauer, Burkhardt | Zeitschriftenaufsatz |
| 2016 | Automated detection of yarn orientation in 3D-draped carbon fiber fabrics and preforms from eddy current data
Bardl, Georg; Nocke, Andreas; Cherif, Chokri; Pooch, Matthias; Schulze, Martin H.; Heuer, Henning; Schiller, Marko; Kupke, Richard; Klein, Marcus | Zeitschriftenaufsatz |
| 2016 | Automatische 3D-Drapieranalyse und Fadenrichtungsbestimmung für technische Textilien
Bardl, Georg; Weise, Daniel; Nocke, Andreas; Cherif, Chokri; Pooch, Matthias; Schulze, Martin; Heuer, Henning; Schiller, Marko | Zeitschriftenaufsatz |
| 2016 | Basisprojekt: Smart Tools for Smart Design
Weisheit, Linda; Wolf, Julia; Biedermann, Miriam; Schönecker, Andreas | Bericht |
| 2016 | Binary WC- and Cr3C2-containing hardmetal compositions for thermally sprayed coatings
Berger, Lutz-Michael | Konferenzbeitrag |
| 2016 | Bonding structure and morphology of chromium oxide films grown by pulsed-DC reactive magnetron sputter deposition
Gago, R.; Vinnichenko, Mykola; Hübner, René; Redondo-Cubero, Andrés | Zeitschriftenaufsatz |
| 2016 | Brazing of kovar to alumina and LTCC for integration of ceramic pressure sensors
Schilm, Jochen; Pönicke, Andreas; Goldberg, Adrian; Partsch, Uwe; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | Carbon membrane gas separation of binary CO2 mixtures at high pressure
Kruse, N.; Schießer, Y.; Kämnitz, Susanne; Richter, Hannes R.; Voigt, Ingolf; Braun, G.; Repke, Jens Uwe | Zeitschriftenaufsatz |
| 2016 | Ceramic and metal-ceramic components with graded microstructure
Scheithauer, Uwe; Schwarzer, Eric; Otto, Christian; Slawik, Tim; Moritz, Tassilo; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | Ceramic substrate technology for wafer level packaging of MEMS
Ziesche, Steffen; Ihle, Martin; Gabler, Felix; Roscher, Frank | Konferenzbeitrag |
| 2016 | Ceramics for Energy Conversion, Storage, and Distribution Systems
: Pfeifer, Thomas (Ed.); Matyás, Josef (Ed.); Balaya, Palani (Ed.); Singh, Dileep (Ed.); Wei, John (Ed.); Singh, Mrityunjay (Vol. Ed.); Ohji, Tatsuki (Vol. Ed.); Michaelis, Alexander (Vol. Ed.) | Tagungsband |
| 2016 | Ceramics for Environmental Systems
: Wang, Liazhou (Ed.); Imanak, Nobuhito (Ed.); Kriven, Waltraud M. (Ed.); Fukushima, Manabu (Ed.); Kale, Girish (Ed.); Singh, Mrityunjay (Vol. Ed.); Ohji, Tatsuki (Vol. Ed.); Michaelis, Alexander (Vol. Ed.) | Tagungsband |
| 2016 | CFY-Stacks: Progress in Development
Megel, Stefan; Kusnezoff, Mihails; Beckert, Wieland; Trofimenko, Nikolai; Dosch, Christian; Weder, Aniko; Jahn, Matthias; Michaelis, Alexander; Bienert, Christian; Brandner, Marco; Skrabs, Stefan; Schulmeyer, Werner; Sigl, Lorenz S. | Poster |
| 2016 | CFY-Stacks: Progress in Development
Megel, Stefan; Kusnezoff, Mihails; Beckert, Wieland; Trofimenko, Nikolai; Dosch, Christian; Weder, Aniko; Jahn, Matthias; Michaelis, Alexander; Bienert, Christian; Brandner, Marco; Skrabs, Stefan; Schulmeyer, Werner; Sigl, Lorenz S. | Konferenzbeitrag |
| 2016 | Characteristics of wet-spun and thermally treated poly acrylonitrile fibers
Kirsten, Martin; Meinl, Juliane; Schönfeld, Katrin; Michaelis, Alexander; Cherif, Chokri | Zeitschriftenaufsatz |
| 2016 | Characterization of anodic bondable LTCC for wafer-level packaging
Hu, Xiaodong; Bäuscher, Manuel; MacKowiak, Piotr; Zhang, Yucheng; Hoelck, Ole; Walter, Hans; Ihle, Martin; Ziesche, Steffen; Hansen, Ulli; Maus, Simon; Gyenge, Oliver; Mukhopadhyay, Biswajit; Ehrmann, Oswin; Lang, Klausdieter; Ngo, Haduong | Konferenzbeitrag |
| 2016 | Characterization of polymer-based materials using fluorescence method and fractal analysis
Chapnyi, Taras; Beshchasna, Nataliia; Schreiber, Jürgen; Opitz, Jörg | Konferenzbeitrag |
| 2016 | Co-sintering behaviour of zirconia-ferritic steel composites
Slawik, Tim; Günther, Anne; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | Combinatorial approaches to evaluate nanodiamond uptake and induced cellular fate
Eldawud, Reem; Reitzig, Manuela; Opitz, Jörg; Rojansakul, Yon; Jiang, Wenjuan; Nangia, Shikha; Dinu, Cerasela Zoica Oica | Zeitschriftenaufsatz |
| 2016 | Combining metal textiles with ceramics by injection molding for novel composites with promising properties
Günther, Anne; Moritz, Tassilo; Leopold, Anne-Katrin; Hofmann, Marcel; Herfert, Heike | Konferenzbeitrag |
| 2016 | A compact readout platform for spectral-optical sensors
Wuchrer, Roland; Amrehn, Sabrina; Liu, Luhao; Wagner, Thorsten; Härtling, Thomas | Zeitschriftenaufsatz |
| 2016 | Comparison of ultrasonic phased array probes based on PMN-PT and PZT 1-3 composites
Walter, Susan; Herzog, Thomas; Schubert, Frank; Heuer, Henning | Konferenzbeitrag |
| 2016 | La competencia sobre planificación de investigaciones en 4° de ESO: Un estudio de caso
Rodríguez-Arteche, Iñigo; Martínez Aznar, Ma Mercedes; Garitagoitia, Maria Aranzazu | Zeitschriftenaufsatz |
| 2016 | Consideration of inhomogeneous shrinkages for LTCC-applications in panel-level processes
Lenz, Christian; Kappert, Sandro; Ziesche, Steffen; Neubert, Holger; Partsch, Uwe | Konferenzbeitrag |
| 2016 | Correlations between suspension formulation, drying parameters, granule structure, and mechanical properties of spray dried ceramic granules
Eckhard, Susanna; Höhn, Sören; Fries, Manfred | Aufsatz in Buch |
| 2016 | Corrosion protection of thickness reduced plasma electrolytic layers on AZ31
Schneider, Michael; Kremmer, Kerstin; Höhn, Sören | Zeitschriftenaufsatz |
| 2016 | CPI stress induced carrier mobility shift in advanced silicon nodes
Sukharev, Valeriy; Choy, Jun-Ho; Kteyan, Armen; Hovsepyan, Henrik; Mühle, Uwe; Zschech, Ehrenfried; Radojcic, Riko | Konferenzbeitrag |
| 2016 | Crystal structure, microstructure and ionic conductivity of the cost-efficient sodium solid electrolyte Na5YSi4O12
Münchgesang, Wolfram; Wagner, Dörte; Motylenko, Mykhaylo; Langklotz, Ulrike; Nestler, Tina; Vyalikh, Anastasia; Meutzner, Falk; Rost, Axel; Schilm, Jochen; Leisegang, Tilmann; Blatov, Vladislav A.; Rafaja, David; Meyer, Dirk C. | Abstract |
| 2016 | Current Trends in Ceramic Technologies and Systems
Michaelis, Alexander; Stelter, Michael; Klemm, Hagen; Voigt, Ingolf; Kriegel, Ralf | Aufsatz in Buch |
| 2016 | A dedicated illumination for full-field X-ray microscopy with multilayer Laue lenses
Niese, Sven; Braun, Stefan; Dietsch, Reiner; Gluch, Jürgen; Holz, Thomas; Huber, Norman; Kubec, Adam; Zschech, Ehrenfried | Konferenzbeitrag |
| 2016 | Definition of requirements for reference experiments to determine and evaluate various damage mechanisms in fibre composites by acoustic emission
Hönig, Ulrike; Holder, Ulrich; Pietzsch, Alexander; Schulze, Eberhard; Frankenstein, Bernd; Schubert, Lars | Konferenzbeitrag |
| 2016 | Design and materials of antiferroelectric capacitors for high density power electronic applications
Engel, Guenther F. | Konferenzbeitrag |
| 2016 | Detailed study of heat generation in porous LiCoO2 electrodes
Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | Determination of local resistivity in ceramic composites by electron microscopy
Sempf, Kerstin; Boese, Markus; Gnauck, Peter; Höhn, Sören; Herrmann, Mathias | Zeitschriftenaufsatz |
| 2016 | Development and characterization of a miniaturized flame ionization detector in ceramic multilayer technology for field applications
Lenz, Christian; Neubert, Holger; Ziesche, Steffen; Förster, Jan; Koch, Christian; Kuipers, Winfred; Deilmann, Michael; Jurkow, Dominik | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2016 | Development of a SOFC/battery-hybrid system for distributed power generation in India
Pfeifer, Thomas; Hartmann, Mathias; Barthel, Markus; Baade, Jens; Näke, Ralf; Dosch, Christian | Konferenzbeitrag |
| 2016 | Development of photo-curable ceramic suspensions usable for additive manufacturing combined with freeze foaming
Schwarzer, Eric; Ahlhelm, Matthias; Scheithauer, Uwe; Moritz, Tassilo; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | Dickschicht-Messwiderstände mit minimiertem Temperaturkoeffizienten für Präzisionssensoren zur Bestimmung der Einspeiseleistung dezentraler Energieerzeuger
Feller, Claudia; Seuthe, Thomas; Eberstein, Markus | Zeitschriftenaufsatz |
| 2016 | The dissolution mechanism of tungsten carbide under ECM conditions
Schneider, Michael; Schubert, Nora; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | ECM of an SiC-based ceramic - passivation and dissolution
Schneider, Michael; Junker, Nils; Schrötke, Elena; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | The effect of composition on the optical properties and hardness of transparent Al-rich MgO·nAl2O3 spinel ceramics
Wätzig, Katja; Krell, Andreas | Zeitschriftenaufsatz |
| 2016 | Effect of internal current flow during the sintering of zirconium diboride by field assisted sintering technology
Gonzales-Julian, Jesus; Jähnert, Kevin; Speer, Kerstin; Liu, Limeng; Räthel, Jan; Knapp, Michael; Ehrenberg, Helmut; Bram, Martin; Guillon, Oliver | Zeitschriftenaufsatz |
| 2016 | Effect of surface modifications on the bond strength of zirconia ceramic with resin cement resin
Hallmann, Lubica; Ulmer, Peter; Lehmann, Frank; Wille, Sebastian; Polonskyi, Oleksander; Johannes, Martina; Köbel, Stefan; Trottenberg, Thomas; Bornholdt, Sven; Haase, Fabian; Kersten, Holger; Kern, Matthias | Zeitschriftenaufsatz |
| 2016 | Energy-Filtered Backscattered Imaging Using Low-Voltage Scanning Electron Microscopy: Characterizing Blends of ZnPc-C60 for Organic Solar Cells
Cid, Aranzazu Garitagoitia; Sedighi, Mona; Löffler, Markus; Dorp, Willem F. van; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2016 | Entwicklung einer neuen Methode zur Ansteuerung von Ultraschall-Phased Arrays
Gommlich, Andreas
: Meyendorf, Norbert (Betreuer/Gutachter); Gerlach, Gerald (Gutachter); Holstein, Peter (Gutachter); Schubert, Frank (Betreuer) | Dissertation |
| 2016 | Entwicklung einer Pro-aktiven Lötstellengeometrie-unabhängigen Lebensdauersimulation für bleifrei Lote
Metais, Benjamin; Kabakchiev, Alexander; Guyenot, Michael; Metasch, René; Röllig, Mike; Buhl, Patrick; Weihe, Stefan | Konferenzbeitrag |
| 2016 | Entwicklung eines korrosionsbeständigen Diamant-Siliciumcarbid-Werkstoffsystems für die Energietechnik - EKODISC
Blug, B.; Hörner, M.; Walter, M.; Hollstein, T.; Matthey, B.; Herrmann, M.; Kunze, S.; Striegler, M.; Fries, M.; Armgardt, M.; Harig, T.; Höfer, M.; Schäfer, L. | Bericht |
| 2016 | Entwicklung neuartiger thermoelektrischer Module für automotive und industrielle Anwendungen
Niedermeyer, Lars; Augsburg, Klaus; Wodtke, Axel; Rebenklau, Lars; Grießmann, Horst; Gierth, Paul; Irrgang, Klaus; Lippmann, Lutz; Bechtold, Franz | Konferenzbeitrag |
| 2016 | Entwicklung von SiSiC-Strukturkeramiken aus Reaktionsharzbeton
Kunze, Steffen
: Michaelis, Alexander (Gutachter); Hufenbach, Werner A. (Gutachter) | Dissertation |
| 2016 | Entwicklung wirtschaftlich effizienter Hartmetallbeschichtungslösungen für Hochtemperaturanwendungen. Teil 2: Einfluss von Wärmebehandlungen und tribologische Untersuchungen
Berger, Lutz-Michael; Trache, Richard; Toma, Filofteia-Laura; Thiele, Sven; Norpoth, Jonas; Janka, Leo | Zeitschriftenaufsatz |
| 2016 | Equipment, material and processes for UV-DLP-based additive manufacturing of two-component ceramic green bodies and dense structures
Springer, Patrick; Schwarzer, Eric; Refle, Oliver; Richter, Hans-Jürgen | Konferenzbeitrag |
| 2016 | Evaluation of alumina as protective coating for carbon fibers in aluminum-based composites
Krug, Mario; Abidin, Alfaferi Zainal; Höhn, Mandy; Kozera, Rafał; Malczyk, Piotr; Endler, Ingolf; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | Experimental investigations of TiAl-brazes for ceramic joining
Martin, Hans-Peter; Triebert, Anke | Konferenzbeitrag |
| 2016 | An explanation of the microcrack formation in Li1.3Al0.3Ti1.7(PO4)3 ceramics
Wätzig, Katja; Rost, Axel; Langklotz, Ulrike; Matthey, Björn; Schilm, Jochen | Zeitschriftenaufsatz |
| 2016 | Fabrication and characterization of a 20 MHz ultrasonic transducer using soft mold process
Günther, Paul; Gebhardt, Sylvia; Neubert, Holger; Herzog, Thomas; Heuer, Henning; Walter, Susan | Poster |
| 2016 | Fast evaluation of biopsy for prostate cancer diagnosis by Fraunhofer IKTS
Lehmann, Andreas; Opitz, Jörg | Abstract |
| 2016 | FAST/Flash eröffnet neue Perspektiven für die industrielle Anwendung des feldunterstützten Sinterns
Hennicke, Jürgen; Herrmann, Mathias; Kessel, Tobias; Räthel, Jan | Zeitschriftenaufsatz |
| 2016 | FIB sample preparation for X-ray microscopy and ROI target cross-sectioning
Zschech, Ehrenfried; Gluch, Jürgen; Rosenkranz, Rüdiger; Standke, Yvonne; Niese, Sven | Abstract |
| 2016 | First special issue of case study in nondestructive testing and evaluation. Editorial
Köhler, Bernd | Zeitschriftenaufsatz |
| 2016 | Foreword to the special section on "Stress-Induced Phenomena in Microelectronics"
Ho, Paul S.; Zschech, Ehrenfried | Abstract |
| 2016 | Formation of secondary borides in liquid phase-sintered B6O materials
Thiele, Maik; Herrmann, Mathias; Müller, Christin; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | Fraunhofer Institute for Ceramic Technologies and Systems. Annual Report 2015/2016
| Jahresbericht |
| 2016 | Fraunhofer-Institut für Keramische Technologien und Systeme. Jahresbericht 2015/2016
| Jahresbericht |
| 2016 | Full polymer dielectric elastomeric actuators (DEA) functionalised with carbon nanotubes and high-K ceramics
Köckritz, Tilo; Luther, René; Paschew, Georgi; Jansen, Irene; Richter, Andreas; Jost, Oliver; Schönecker, Andreas; Beyer, Eckhard | Zeitschriftenaufsatz |
| 2016 | Functional metal ceramic composites: Application of coating technologies for the composite production
Zelm, Roland; Greiffenberg, Ina; Großmann, Harald J.; Slawik, Tim; Günther, Anne; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | Functionalization and large scale assembly of carbon nanotubes
Majumder, Anindya
: Cuniberti, Gianaurelio (1. Gutachter); Bock, Karlheinz (2. Gutachter); Opitz, Jörg (Betreuer) | Dissertation |
| 2016 | Functionally graded materials made by water-based multilayer technology
Scheithauer, Uwe; Schwarzer, Eric; Slawik, Tim; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | Fundamental limitations at the determination of initial yield stress using nano-indentation with spherical tips
Clausner, André; Richter, Frank | Zeitschriftenaufsatz |
| 2016 | Ga contamination in silicon by focused ion beam milling: Dynamic model simulation and atom probe tomography experiment
Huang, J.; Löffler, M.; Möller, W.; Zschech, Ehrenfried | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2016 | Gefrierschäume - Entwicklung von zellularen Strukturen für vielfältige Anwendungen
Ahlhelm, Matthias
: Michaelis, Alexander (Hrsg.); Heinrich, Jürgen (Betreuer); Moritz, Tassilo (Betreuer) | Dissertation |
| 2016 | Gefügeausbildung und Eigenschaften von nanoskaligen binderfreien Hartmetallen
Pötschke, Johannes
: Michaelis, Alexander (Hrsg.) | Dissertation |
| 2016 | Glass ceramic separators for room temperature operating sodium batteries
Wagner, Dörte; Rost, Axel; Schilm, Jochen; Fritsch, Marco; Kusnezoff, Mihails; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | Grain boundary segregation in sintered materials: Effect on densification and grain growth
Lay, Sabine; Guyon, Audrey; Chaix, Jean-Marc; Carry, Claude; Pötschke, Johannes | Konferenzbeitrag |
| 2016 | Herstellung von dünnen mischleitenden Ba0,5Sr0,5Co0,8Fe02O3-δ-Membranen mit hoher Sauerstoffpermeation auf porösen rohrförmigen Trägern im Cofiring
Pippardt, Ute; Bernhardt, Matthias; Böer, Jürgen; Kiesel, Lutz; Kircheisen, Robert; Kriegel, Ralf; Voigt, Ingolf; Weyd, Marcus | Zeitschriftenaufsatz |
| 2016 | Herstellung, Modifizierung und Charakterisierung von borcarbidbasierten Keramiken als Thermoelektrikum
Feng, Bing
: Michaelis, Alexander (Gutachter); Lippmann, Wolfgang (Gutachter); Kieback, Bernd | Dissertation |
| 2016 | High performance silver polymer pastes for SHJ cells
Körner, Stefan; Waltinger, Andreas; Partsch, Uwe; Eberstein, Markus | Vortrag |
| 2016 | High resolution radio frequency inspection of carbon fiber composites
Heuer, Henning; Schulze, Martin; Pooch, Matthias | Konferenzbeitrag |
| 2016 | Highly efficient and long-term stable micro fuel cell system based on ceramic multilayer technology
Goldberg, Adrian; Röntzsch, Lars; Pohlmann, Carsten; Freytag, Christian; Tagne Saha, Ariel Thierry; Ziesche, Steffen; Partsch, Uwe | Konferenzbeitrag |
| 2016 | Hochtemperatur-Stabilität optikrelevanter Eigenschaften von transparenter MgAl2O4-Spinell-Keramik
Reichel, Uwe; Notni, Gunther; Duparré, Angela; Müller, F.A.; König, Stefan; Herold, Volker | Aufsatz in Buch |
| 2016 | HOT-300 - a multidisciplinary technology approach targeting microelectronic systems at 300 °C operating temperature
Vogt, Holger; Altmann, Frank; Braun, Sebastian; Celik, Yusuf; Dietrich, Lothar; Dietz, Dorothee; Dijk, Marius van; Dreiner, Stefan; Döring, Ralf; Gabler, Felix; Goehlich, Andreas; Hutter, Matthias; Ihle, Martin; Kappert, Holger; Kordas, Norbert; Kokozinski, Rainer; Naumann, Falk; Nowak, Torsten; Oppermann, Hermann; Partsch, Uwe; Petzold, Matthias; Roscher, Frank; Rzepka, Sven; Schubert, Ralph; Weber, Constanze; Wiemer, Maik; Wittler, Olaf; Ziesche, Steffen | Konferenzbeitrag |
| 2016 | A hybrid phenomenological model for ferroelectroelastic ceramics. Part I: Single phased materials
Stark, Sebastian; Neumeister, Peter; Balke, Herbert | Zeitschriftenaufsatz |
| 2016 | A hybrid phenomenological model for ferroelectroelastic ceramics. Part II: Morphotropic PZT ceramics
Stark, Sebastian; Neumeister, Peter; Balke, Herbert | Zeitschriftenaufsatz |
| 2016 | Improvement of interface between electrolyte and electrodes in solid oxide electrolysis cell
Trofimenko, Nikolai; Kusnezoff, Mihails; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | In-operando Temperaturmessung bei der plasmaelektrolytischen Oxidation von Aluminium
Voigt, Karsten; Lämmel, Christoph; Schneider, Michael | Konferenzbeitrag |
| 2016 | Influence of electrode design and contacting layers on performance of electrolyte supported SOFC/SOEC single cells
Kusnezoff, Mihails; Trofimenko, Nikolai; Müller, Martin; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | Influence of heat treatment on the abrasive wear resistance of a Cr3C2-NiCr coating deposited by an ethene-fuelled HVOF spray process
Janka, Leo; Norpoth, Jonas; Trache, Richard; Berger, Lutz-Michael | Zeitschriftenaufsatz |
| 2016 | Influence of PAN-fiber stretching during thermal treatment on the stabilization reactions
Meinl, Juliane; Kirsten, Martin; Cherif, Chokri; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | Influence of the polarization anisotropy on the electrocaloric effect in epitaxial PMN-PT thin films
Mietschke, Michael; Chekhonin, Paul; Molin, Christian; Gebhardt, Sylvia; Fähler, Sebastian; Nielsch, Kornelius; Schultz, Linda; Hühne, Ruben | Zeitschriftenaufsatz |
| 2016 | The influence of the synthesis route on electrochemical properties of spinel type high-voltage cathode material LiNi0.5Mn1.5O4 for lithium ion batteries
Seidel, Matthias; Nikolowski, Kristian; Wolter, Mareike; Kinski, Isabel; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | Innovative and novel manufacturing methods of ceramics and metal-ceramic composites for biomedical applications
Ahlhelm, Matthias; Günther, Paul; Scheithauer, Uwe; Schwarzer, Eric; Günther, Anne; Slawik, Tim; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | Integration of high-frequency M-type hexagonal ferrite inductors in LTCC multilayer modules
Bierlich, Silvia; Reimann, Timmy; Barth, Stefan; Capraro, Beate; Bartsch, Heike; Müller, Jens; Töpfer, Jörg | Zeitschriftenaufsatz |
| 2016 | Integrative evaluation of automated massage combined with thermotherapy: physical, physiological, and psychological viewpoints
Kim, Dowon; Lee, Daewoon; Schreiber, Jürgen; Im, Changhwan; Kim, Hansung | Zeitschriftenaufsatz |
| 2016 | An interlaboratory comparison of nanosilver characterisation and hazard identification: Harmonising techniques for high quality data
Jemec, Anita; Kahru, Anne; Potthoff, Annegret; Drobne, Damjana; Heinlaan, Margit; Böhme, Steffi; Geppert, Mark; Novak, Sara; Schirmer, Kristin; Rekulapally, Rohit; Singh, Shashi; Aruoja, Villem; Sihtmäe, Mariliis; Juganson, Katre; Käkinen, Aleksandr; Kühnel, Dana | Zeitschriftenaufsatz |
| 2016 | Joining of ceramic Ba0.5Sr0.5Co0.8Fe0.2O3 membranes for oxygen production to high temperature alloys
Kiebach, Ragnar; Engelbrecht, Kurt L.; Kwok, Kawai; Molin, Sebastian M.; Søgaard, Martin; Niehoff, Patrick; Schulze-Küppers, Falk; Kriegel, Ralf; Kluge, Jens; Hendriksen, Peter Vang | Zeitschriftenaufsatz |
| 2016 | Joining technologies for a temperature-stable integration of a LTCC-based pressure sensor
Schilm, Jochen; Goldberg, Adrian; Partsch, Uwe; Dürfeld, Wolfgang; Arndt, Dietmar; Pönicke, Andreas; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | Keramik für Filtrationsanwendungen
Adler, Jörg; Kriegel, Ralf; Petasch, Uwe; Richter, Hannes; Voigt, Ingolf; Weyd, Marcus | Zeitschriftenaufsatz |
| 2016 | Kohlenstroffmembran, Verfahren zur Herstellung von Kohlenstoffmenbranen und deren Verwendung
Richter, Hannes; Kämnitz, Susanne; Voigt, Ingolf; Grützner, Jörg; Martin, Dirk | Patent |
| 2016 | Konform temperierter Fluidmischer
Pohl, Markus; Gradmann, Rena; Scheithauer, Uwe; Eberstein, Markus | Poster |
| 2016 | Laser Speckle Photometry (LSP) - optical sensor system for monitoring of material condition and processing
Cikalova, Ulana; Bendjus, Beatrice; Sudip, Shohag Roy; Chen, Lili | Konferenzbeitrag |
| 2016 | Laser-akustische Messtechnik in der Materialcharakterisierung
Windisch, Thomas
: Meyendorf, Norbert (Gutachter / Betreuer); Gerlach, Gerald (Gutacher); Burgholzer, Peter (Gutacher) | Dissertation |
| 2016 | Long-term compositional/microstructural development of Cr3C2-NiCr coatings at 500 °C, 700 °C and 900 °C
Matthews, Steven; Berger, Lutz-Michael | Zeitschriftenaufsatz |
| 2016 | Low cost, ceramic battery components and cell design
Weidl, Roland; Schulz, Matthias; Hofacker, Martin; Dohndorf, Heidi; Stelter, M. | Konferenzbeitrag |
| 2016 | LTCC - packaging of a laser optical system for harsh environments
Ihle, Martin; Ziesche, Steffen; Beckert, Erik; Hornaff, Marcel | Konferenzbeitrag |
| 2016 | Manufacturing and properties of polycrystalline WC-Co based cemented carbides
Pötschke, Johannes; Richter, Volkmar; Mayer, Markus | Konferenzbeitrag |
| 2016 | Material and ingenious synthesis strategy for short-wavelength infrared light-emitting device
Fu, Jipeng; Zhang, Su; Pang, Ran; Jia, Yonglei; Sun, Wenzhi; Li, Haifeng; Jiang, Lihong; Li, Chengyu | Zeitschriftenaufsatz |
| 2016 | Materialdiagnose und integrale Prüfverfahren für keramische Bauteile
Opitz, Jörg; Wunderlich, Christian; Bendjus, Beatrice; Cikalova, Ulana; Wolf, Christian; Naumann, Sascha; Lehmann, Andreas; Barth, Martin; Duckhorn, Frank; Köhler, Bernd; Tschöke, Kilian; Tschöpe, Constanze; Moritz, Tassilo; Scheithauer, Uwe; Windisch, Thomas | Zeitschriftenaufsatz |
| 2016 | Materials and technologies to enable high temperature stable MEMS and electronics for smart systems used in harsh environments
Gabler, Felix; Roscher, Frank; Döring, Ralf; Otto, Alexander; Ziesche, Steffen; Ihle, Martin; Celik, Yusuf; Dietz, Dorothee; Goehlich, Andreas; Kappert, Holger; Vogt, Holger; Naumann, Falk; Geßner, Thomas | Konferenzbeitrag |
| 2016 | Mechanical characterization of porous nano-thin films by use of atomic force acoustic microscopy
Kopycinska-Müller, Malgorzata; Clausner, André; Yeap, Kong Boon Oon; Köhler, Bernd; Kuzeyeva, Nataliya; Mahajan, Sukesh; Savage, Travis; Zschech, Ehrenfried; Wolter, Klaus-Jürgen | Zeitschriftenaufsatz |
| 2016 | Mechanism of gas separation through amorphous silicon oxycarbide membranes
Prasad, Ravi Mohan; Jüttke, Yvonne; Richter, Hannes; Voigt, Ingolf; Riedel, Ralf; Gurlo, Aleksander | Zeitschriftenaufsatz |
| 2016 | Medizinische Komponenten und Design-Artikel aus Keramik - hergestellt mit additiver Fertigungstechnik
Moritz, Tassilo; Scheithauer, Uwe; Schwarzer, Eric; Ahlhelm, Matthias | Zeitschriftenaufsatz |
| 2016 | Melatonin suppresses autophagy induced by clinostat in preosteoblast MC3T3-E1 cells
Yoo, Yeong-Min; Han, Tae-Young; Kim, Han Sung | Zeitschriftenaufsatz |
| 2016 | Melatonin-mediated intracellular insulin during 2-deoxy-D-glucose treatment is reduced through autophagy and EDC3 protein in insulinoma INS-1E cells
Kim, Han Sung; Han, Tae-Young; Yoo, Yeong-Min | Zeitschriftenaufsatz |
| 2016 | Membrane electrolysis - a promising technology for mine water treatment, radionuclide separation, and extraction of valuable metals
Friedrich, H.J. | Konferenzbeitrag |
| 2016 | Messverfahren zur thermo-mechanischen Charakterisierung von Werkstoffen der Hochtemperatur-AVT
Metasch, René; Klemm, Alexander; Röllig, Mike; Zerna, Thomas | Konferenzbeitrag |
| 2016 | A method for analysing the die filling behaviour of ceramic granules
Glöß, Bianca; Fries, Manfred | Zeitschriftenaufsatz |
| 2016 | Micro-Reactors made by lithography-based ceramic manufacturing (LCM)
Scheithauer, Uwe; Schwarzer, Eric; Ganzer, Gregor; Körnig, André; Beckert, Wieland; Reichelt, Erik; Jahn, Matthias; Härtel, Anja; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | A model for statistical electromigration simulation with dependence on capping layer and Cu microstructure in two dimensions
Kraatz, Matthias; Gall, Martin; Zschech, Ehrenfried; Schmeißer, Dieter; Ho, Paul S. | Zeitschriftenaufsatz |
| 2016 | Modified differential scanning calorimeter for direct electrocaloric measurements
Sanlialp, Mehmet; Molin, Christian; Shvartsman, Vladimir V.; Gebhardt, Sylvia; Lupascu, Doru Constantin | Zeitschriftenaufsatz |
| 2016 | Monolithischer statischer Mischer und/oder katalytisch wirkendes Element sowie Verfahren zur Herstellung
Scheithauer, Uwe; Reichelt, Erik; Beckert, Wieland; Schwarzer, Eric; Pohl, Markus | Patent |
| 2016 | Multi-material approach to integrate ceramic boxed temperature-sensitive components in laser beam melted structures for bio and other applications
Lausch, Holger; Töppel, Thomas; Petters, Romy; Gronde, Bernd; Herrmann, Mathias; Funke, Kerstin | Konferenzbeitrag |
| 2016 | Multi-scale radiographic applications in microelectronic industry
Gluch, Jürgen; Löffler, Markus; Meyendorf, Norbert G.; Oppermann, Martin; Röllig, Mike; Sättler, P.; Wolter, Klaus-Jürgen; Zschech, Ehrenfried | Konferenzbeitrag |
| 2016 | Nanomaterial-modified flexible micro-electrode array by electrophoretic deposition of carbon nanotubes
Winkin, Nadine; Gierth, Uta; Mokwa, Wilfried; Schneider, Michael | Zeitschriftenaufsatz |
| 2016 | Nanomonitoring of ceramic surface
Lapina, V.A.; Pershukevich, P.P.; Pavich, T.A.; Bushuk, S.B.; Opitz, Jörg | Konferenzbeitrag |
| 2016 | NDE applications in microelectronic industries
Meyendorf, Norbert; Oppermann, Martin; Krüger, Peter; Röllig, Mike; Wolter, Klaus-Jürgen | Konferenzbeitrag |
| 2016 | New lightweight kiln furniture - Production processes and properties
Scheithauer, Uwe; Slawik, Tim; Schwarzer, Eric; Tscharntke, Franziska; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | Non-covalent modified multi-walled carbon nanotubes: Dispersion capabilities and interactions with bacteria
Khazaee, Maryam; Majumder, Anindya; Baraban, Larysa; Cuniberti, Gianaurelio; Opitz, Jörg; Ye, Dan | Zeitschriftenaufsatz |
| 2016 | Non-destructive imaging of organosilicate glass (OSG) thin films at low voltage with the EsB detector
Garitagoitia, Maria Aranzazu; Moayedi, Elham; Rosenkranz, Rüdiger; Clausner, André; Pakbaz, Khashayar; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2016 | Nondestructive cell evaluation techniques in SOFC stack manufacturing
Wunderlich, Christian | Konferenzbeitrag |
| 2016 | Novel approaches to determine thermomechanical materials data in advanced interconnect stacks
Zschech, Ehrenfried; Gall, Martin; Clausner, André; Sander, Christoph; Sukharev, Valeriy | Konferenzbeitrag |
| 2016 | A novel dichromic self-referencing optical probe SrO:Bi(3+),Eu(3+) for temperature spatially and temporally imaging
Fu, Jipeng; Pang, Ran; Jiang, Lihong; Jia, Yonglei; Sun, Wenzhi; Zhang, Su; Li, Chengyu | Zeitschriftenaufsatz |
| 2016 | A novel piezoelectric fibre patch transducer for shear horizontal wave modes
Köhler, Bernd; Gaul, Tobias; Schubert, Frank; Lieske, Uwe | Konferenzbeitrag |
| 2016 | Novel polycrystalline WC-Co based cemented carbides and their properties
Pötschke, Johannes; Richter, Volkmar; Mayer, Markus | Konferenzbeitrag |
| 2016 | Offshore foundation monitoring by guided waves - challenges and perspectives
Weihnacht, Bianca; Frankenstein, Bernd; Gaul, Tobias; Neubeck, Robert; Schubert, Lars | Konferenzbeitrag |
| 2016 | On determination of focal laws for linear phased array probes as to the active and passive element size
Gommlich, Andreas; Schubert, Frank | Konferenzbeitrag |
| 2016 | On the strength and failure of an electrolyte supported solid oxide fuel cell
Fleischhauer, Felix
: Danzer, Robert (Betreuer); Michaelis, Alexander (Gutachter) | Dissertation |
| 2016 | Optical electron beam dosimetry with ceramic phosphors as passive sensor material for broad dose ranges
Reitzig, Manuela; Goodband, Rachel; Schuster, Christiane; Härtling, Thomas | Zeitschriftenaufsatz |
| 2016 | Optimisation methods for the determination of cyclic material parameters from strain controlled uniaxial fatigue tests
Fuhrmann, Katrin; Neumeister, Peter; Eulitz, Klaus-Georg | Zeitschriftenaufsatz |
| 2016 | Optimization of the SEM working conditions: EsB detector at low voltage
Cid, Aranzazu Garitagoitia; Rosenkranz, Rüdiger; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2016 | Oxidized carbo-iron causes reduced reproduction and lower tolerance of juveniles in the amphipod Hyalella azteca
Weil, Mirco; Meißner, Tobias; Springer, Armin; Bundschuh, Mirco; Hübler, Lydia; Schulz, Ralf; Duis, Karen | Zeitschriftenaufsatz |
| 2016 | Platinum electrodeposition from a dinitrosulfatoplatinate(II) electrolyte
Weiser, Mathias; Schulze, Claudia; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | PMN-8PT device structures for electrocaloric cooling applications
Molin, Christian; Gebhardt, Sylvia | Konferenzbeitrag, Zeitschriftenaufsatz |
| 2016 | Pollen structure visualization using high-resolution laboratory-based hard X-ray tomography
Li, Qiong; Gluch, Jürgen; Krüger, Peter; Gall, Martin; Neinhuis, Christoph; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2016 | Potential improvements of the presently applied in-service inspection of wheelset axles
Kappes, Wolfgang; Hentschel, Dieter; Oelschlägel, Thomas | Zeitschriftenaufsatz |
| 2016 | Preface. Advances in solid oxide fuel cells and electronic ceramics
Bansal, Narottam P.; Kusnezoff, Mihails; Shimamura, Kiyoshi | Konferenzbeitrag |
| 2016 | Processing of thermoplastic suspensions for additive manufacturing of ceramic- and metal-ceramic-composites by thermoplastic 3D-printing (T3DP)
Scheithauer, Uwe; Schwarzer, Eric; Härtel, Anja; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | Properties of retinal precursor cells grown on vertically aligned multiwalled carbon nanotubes generated for the modification of retinal implant-embedded microelectrode arrays
Johnen, Sandra; Meißner, Frank; Krug, Mario; Baltz, Thomas; Endler, Ingolf; Mokwa, Wilfried; Walter, Peter M. | Zeitschriftenaufsatz |
| 2016 | Quantifying voids effecting delamination in carbon/epoxy composites: static and fatigue fracture behavior
Hakim, I.; May, D.; Ras, M.; Meyendorf, Norbert; Donaldson, Steven L. | Konferenzbeitrag |
| 2016 | Robust and reliable encapsulation of electronics for underwater applications
Schwerz, Robert; Röllig, Mike; Frankenstein, Bernd | Konferenzbeitrag |
| 2016 | A ruthenium racemisation catalyst for the synthesis of primary amines from secondary amines
Pingen, Dennis; Altıntaş, Çiğdem; Schaller, Max Rudolf; Vogt, Dieter | Zeitschriftenaufsatz |
| 2016 | Schichten aus Kohlenstoff-Nanomaterialien auf asymmetrisch porösen, keramischen Trägern und deren Erprobung für Anwendungen in Membrantechnik und Katalyse
Simon, Adrian
: Ritter, Uwe (Betreuer); Rädlen, Edda (Gutachter); Voigt, Ingolf (Gutachter) | Dissertation |
| 2016 | Semi-automated inspection unit for ceramics
Wolf, Christian; Lehmann, Andreas; Unglaube, Gregor | Konferenzbeitrag |
| 2016 | Shear horizontal piezoelectric fiber patch transducers (SH-PFP) for guided elastic wave applications
Köhler, Bernd; Gaul, Tobias; Lieske, Uwe; Schubert, Frank | Zeitschriftenaufsatz |
| 2016 | Shear horizontal ultrasonic waves excited by piezoelectric fiber patches
Köhler, Bernd; Gaul, Tobias; Lieske, Uwe; Schubert, Frank | Konferenzbeitrag |
| 2016 | Sliding and abrasive wear behaviour of HVOF- and HVAF-sprayed Cr3C2-NiCr hardmetal coatings
Bolelli, Giovanni; Berger, Lutz-Michael; Börner, Tim; Koivuluoto, Heli; Matikainen, V.; Lusvarghi, Luca; Lyphout, Christophe; Markocsan, Nicolaie; Nylén, Per E.; Sassatelli, Paolo; Trache, Richard; Vuoristo, Petri | Zeitschriftenaufsatz |
| 2016 | SoC dependent kinetic parameters of insertion electrodes from StairCase - GITT
Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | Sodiation vs. Lithiation of FePO4: A comparative kinetic study
Heubner, Christian; Heiden, Sebastian; Matthey, Björn; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | SOFC system development and held trials for commercial applications
Pfeifer, Thomas; Reuber, Sebastian; Hartmann, Mathias; Barthel, Markus; Baade, Jens | Konferenzbeitrag |
| 2016 | Some aspects of macroscopic phenomenological material models for ferroelectroelastic ceramics
Stark, Sebastian; Neumeister, Peter; Balke, Herbert | Zeitschriftenaufsatz |
| 2016 | Spark plasma sintering novel tooling design: Temperature uniformization during consolidation of silicon nitride powder
Giuntini, Diletta; Räthel, Jan; Herrmann, Mathias; Michaelis, Alexander; Haines, Christopher D.; Olevsky, Eugene Al | Zeitschriftenaufsatz |
| 2016 | Sprödbruchrisiko an keramischen Bauelementen in Abhängigkeit vom Hochtemperatur-Lotwerkstoff und der Beanspruchungsgeschwindigkeit
Dudek, Rainer; Hildebrandt, Marcus; Rzepka, Sven; Röllig, Mike; Trodler, Jörg | Konferenzbeitrag |
| 2016 | Status of SOFC/SOEC stack and system development and commercialization activities at Fraunhofer IKTS
Kusnezoff, Mihails; Megel, Stefan; Jahn, Matthias; Pfeifer, Thomas; Baade, Jens | Konferenzbeitrag |
| 2016 | A SThM probe optimization and its time-space multi-scale modeling
Lenczner, Michel; Yang, Bin; Bontempi, Alexia; Teyssieux, Damien; Cogan, Scott D.; Janus, Pawel; Köhler, Bernd; Ratier, Nicolas E. | Zeitschriftenaufsatz |
| 2016 | Structural and ferroelectric properties of 0.9PMN-0.1PT thin films
Mietschke, Michael; Engelhardt, Stefan; Fähler, Sebastian; Molin, Christian; Gebhardt, Sylvia; Schultz, Ludwig; Hühne, Ruben | Konferenzbeitrag |
| 2016 | Structural and ferroelectric properties of epitaxial BaZrxTi1-xO3 thin films
Engelhardt, Stefan; Mietschke, Michael; Molin, Christian; Gebhardt, Sylvia; Fähler, Sebastian; Nielsch, Kornelius; Hühne, Ruben | Zeitschriftenaufsatz |
| 2016 | Structural characterisation of carbon fibres along the fabrication process using SEM/FIB and TEM
Mühle, Uwe; Standke, Yvonne; Zschech, Ehrenfried; Meinl, Juliane; Michaelis, Alexander; Kirsten, Martin; Cherif, Chokri | Konferenzbeitrag |
| 2016 | Study of mechanical behavior of AFM silicon tips under mechanical load
Kopycinska-Müller, Malgorzata; Gluch, Jürgen; Köhler, Bernd | Zeitschriftenaufsatz |
| 2016 | Symposium Anodisieren - Oxidschichten von hart bis smart 2016
: Michaelis, Alexander; Schneider, Michael | Tagungsband |
| 2016 | Synthesis of plasmonic Cu2-xSe@ZnS Core@Shell nanoparticles
Wolf, Andreas; Härtling, Thomas; Hinrichs, Dominik; Dorfs, Dirk | Zeitschriftenaufsatz |
| 2016 | Systementwicklung zur Strukturüberwachung mit geführten Wellen
Schubert, Lars; Weihnacht, Bianca; Lieske, Uwe; Frankenstein, Bernd; Gebhardt, Sylvia; Neumeister, Peter; Neubert, Holger | Konferenzbeitrag |
| 2016 | Tailored composite transducers based on piezoceramic fibres and pearls
Hohlfeld, Kai; Neumeister, Peter; Michaelis, Alexander; Gebhardt, Sylvia | Konferenzbeitrag |
| 2016 | Technologien zur zuverlässigen und effizienten Prüfung von Unterwasser-Tragstrukturen an Offshore-Windenergieanlagen
Weihnacht, Bianca | Bericht |
| 2016 | Technology readiness of SOFC stacks technology - A review
Wunderlich, Christian | Konferenzbeitrag |
| 2016 | TEM investigation of barrier-like anodic oxide films on aluminum
Schneider, Michael; Lämmel, Christoph; Hübner, Ralf; Gierth, Uta; Michaelis, Alexander | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2016 | TEM investigation of time-dependent dielectric breakdown mechanisms in Cu/Low-k interconnects
Liao, Zhongquan; Gall, Martin; Yeap, Kong Boon; Sander, Christoph; Clausner, André; Mühle, Uwe; Gluch, Jürgen; Standke, Yvonne; Rosenkranz, Rüdiger; Aubel, Oliver; Hauschildt, Meike; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2016 | Temperature control of an SThM micro-probe with an heat source estimator and a lock-in measurement
Lenczner, Michel; Yang, Bin; Cogan, Scott D.; Domas, Stêphane; Ke, D.; Couturier, Raphaël; Renault, D.; Köhler, Bernd; Janus, Pawel | Konferenzbeitrag |
| 2016 | Theoretische und experimentelle Untersuchungen zu Stofftransport und Druckverlust in geschütteten und strukturierten Festbetten
Reichelt, Erik
: Lange, Rüdiger (Gutachter); Landmesser, Holger (Gutachter); Michaelis, Alexander (Ed.) | Dissertation |
| 2016 | Thermisch-elektrochemische in-operando Untersuchungen zur lokalen Wärmeentwicklung in Lithiumionenbatteriezellen
Heubner, Christian
: Michaelis, Alexander | Dissertation |
| 2016 | Thermische Analysen und Bestimmungen thermophysikalischer Eigenschaften von Materialien und Bauteilen
Gestrich, Tim | Konferenzbeitrag |
| 2016 | Three dimensional image-based simulation of ultrasonic wave propagation in polycrystalline metal using phase-field modeling
Nakahataa, K.; Sugahara, H.; Barth, Martin; Köhler, Bernd; Schubert, Frank | Zeitschriftenaufsatz |
| 2016 | TiOx-based thermoelectric modules: Manufacturing, properties, and operational behavior
Martin, Hans-Peter; Pönicke, Andreas; Kluge, Martin; Sichert, Ina; Rost, Axel; Conze, Susan; Wätzig, Katja; Schilm, Jochen; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2016 | TiSiCN nanocomposite hard coatings by CVD
Höhn, Mandy; Endler, Ingolf; Matthey, Björn | Konferenzbeitrag |
| 2016 | Tool technologies for milling of hardmetals and ceramics
Bergs, Thomas; Richter, Volkmar; Ottersbach, Michael; Pötschke, Johannes; Hochmuth, Carsten; Busch, Katja | Konferenzbeitrag |
| 2016 | Towards fabrication of high frequency ultrasonic transducers using soft mold process
Gebhardt, Sylvia; Günther, Paul; Neubert, Holger; Fröhlich, Selina; Walter, Susan; Herzog, Thomas; Heuer, Henning | Konferenzbeitrag |
| 2016 | Transparent alumina ceramics densified by a combinational approach of spark plasma sintering and hot isostatic pressing
Trunec, Martin; Klimke, Jens; Shen, Zhijian-James | Zeitschriftenaufsatz |
| 2016 | Transparent ceramics at 50: Progress made and further prospects
Goldstein, Adrian; Krell, Andreas | Zeitschriftenaufsatz |
| 2016 | Transparent front side contact pastes for high efficiency SHJ-solar cells
Körner, Stefan; Waltinger, Andreas; Eberstein, Markus | Vortrag |
| 2016 | Transparent MgAl2O4/LiF ceramics by hot-pressing: Host-additive interaction mechanisms issue revisited
Goldstein, Adrian; Räthel, Jan; Katz, Michael; Berlin, Mila; Galun, Ehud | Zeitschriftenaufsatz |
| 2016 | Transportables Messgerät zum Prüfen einer Probe mittels Ultraschall
Schiller-Bechert, David Maximilian; Macher, Frank | Patent |
| 2016 | Untersuchung wärmebedingter Beeinträchtigungen der Schichteigenschaften beim Hartanodisieren
Lämmel, Christoph; Schneider, Michael; Heubner, Christian; Michaelis, Alexander | Konferenzbeitrag |
| 2016 | Untersuchungen zu mikroskopischen und makroskopischen Grünkörperfehlern bei der uniaxialen Pressverdichtung
Svoboda, Hermann
: Michaelis, Alexander (1. Gutachter); Falk, Guido (2. Gutachter); Fries, Manfred (Betreuer) | Dissertation |
| 2016 | Using a Newman-based battery model and post mortem analysis to develop a non-destructive method for SoH estimation
Schledde, D.; Leiva, D.; Schwalm, M.; Puchta, M.; Nikolowski, K.; Wolter, M. | Poster |
| 2016 | Validation of an ultrasonic-phased array method for testing of circumferential welds at thin-walled pipes
Hillmann, Susanne; Schubert, Frank; Brosius, David Maximilian; Bor, Zsolt | Zeitschriftenaufsatz |
| 2016 | Validation of an ultrasonic-phased-array-method for testing of circumferential welds at thin-walled pipes
Hillmann, Susanne; Schubert, Frank; Schiller-Bechert, David-Maximilian; Bor, Zsolt | Konferenzbeitrag |
| 2016 | Verfahren und Anordnung zur Erzeugung und thermischen Kompression von Sauerstoff
Kriegel, Ralf; Kircheisen, Robert; Sonnenberg, Claudia; Schulz, Matthias | Patent |
| 2016 | Verfahren und System zum Bestimmen einer mechanischen Verformung und/oder eines Defekts eines Probekörpers
Schulze, Martin; Heuer, Henning | Patent |
| 2016 | Verfahren zur Detektion von Fehlern oder Defekten an Bauteilen unter Einsatz von Ultraschallwandlern
Joneit, Dieter; Walter, Susan | Patent |
| 2016 | Verfahren zur Herstellung dichter Bauteile aus Zirkoncarbid und mit dem Verfahren hergestellte Bauteile
Schönfeld, Katrin; Martin, Hans-Peter | Patent |
| 2016 | Verfahren zur Herstellung eines Silber enthaltenden Glaspulvers sowie die Verwendung des Glaspulvers
Körner, Stefan; Eberstein, Markus | Patent |
| 2016 | Verfahren zur Herstellung und Überprüfung von Werkstücken und Werkstück
Härtling, Thomas; Schuster, Christiane | Patent |
| 2016 | Werkstoff bei dem in eine Siliciumnitrid-Matrix-Diamant- oder cBN-Partikel als Hartstoff eingebettet sind, und Verfahren zu seiner Herstellung
Zschippang, Eveline; Wolfrum, Anne-Kathrin; Herrmann, Mathias | Patent |
| 2016 | Zuverlässigkeitsuntersuchungen an organischen Leiterplatten mit dickem Kupferkern für leistungselektronische Anwendungen
Meier, Karsten; Röllig, Mike; Bock, Karlheinz | Konferenzbeitrag |
| 2015 | Activation of mTOR for the loss of skeletal muscle in a hindlimb-suspended rat model
Yoo, Yeong-Min; Park, Ji Hyung; Seo, Dong-Hyun; Eom, Sinae; Jung, Young Jin; Kim, Tack-Joong; Han, Tae-Young; Kim, Han Sung | Zeitschriftenaufsatz |
| 2015 | Adapting the co-sintering behaviour of metal-ceramic composites
Slawik, Tim; Günther, Anne; Scheithauer, Uwe; Scholl, Roland; Schwarzer, Eric; Moritz, Tassilo; Michaelis, Alexander | Konferenzbeitrag |
| 2015 | Additive Fertigung von Hartmetallen: Druck von komplexen Hartmetallwerkzeugen
Pötschke, Johannes | Zeitschriftenaufsatz |
| 2015 | Additive manufacturing of metal-ceramic-composites by thermoplastic 3D-printing (3DTP)
Scheithauer, Uwe; Slawik, Tim; Schwarzer, Eric; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2015 | Advancement of tooling for spark plasma sintering
Giuntini, Diletta; Räthel, Jan; Herrmann, Mathias; Michaelis, Alexander; Olevsky, Eugene A. | Zeitschriftenaufsatz |
| 2015 | Advances in Solid Oxide Fuel Cells X. Preface
Kusnezoff, Mihails; Bansal, Narottam P. | Konferenzbeitrag |
| 2015 | Aging behavior of reactive air brazed seals for SOFC
Pönicke, Andreas; Schilm, Jochen; Kusnezoff, Mihails; Michaelis, Alexander | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2015 | Analyse und quantitative Beschreibung des Matrizenfüllprozesses beim Trockenpressen. Schlussbericht
Fries, M.; Glöß, B.; Kraft, T.; Breinlinger, T. | Bericht |
| 2015 | Analysis of the counter-electrode potential in a 3-electrode lithium ion battery cell
Heubner, Christian; Langklotz, Ulrike; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2015 | Anodic dissolution of cobalt in aqueous sodium nitrate solution at high current densities
Schneider, Michael; Schubert, Nora; Höhn, Sören; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2015 | Anordnung und Verfahren zur Durchführung einer intensivierten Verbrennung
Kriegel, Ralf; Kircheisen, Robert; Lampinen, Markku; Ristimäki, Ville | Patent |
| 2015 | Anordnung zur tomografischen Erfassung von plattenförmigen Objekten
Fischer, Björn; Krüger, Peter; Reinert, Sven | Patent |
| 2015 | Anordnung zur zerstörungsfreien Werkstoffprüfung
Köhler, Bernd; Schubert, Frank; Lieske, Uwe | Patent |
| 2015 | Anwendungen der Röntgenmikroskopie in der Mikroelektronik und Energietechnik
Zschech, Ehrenfried; Gluch, Jürgen; Niese, Sven; Lewandowska, Anna; Wolf, Jürgen M.; Röntzsch, Lars; Löffler, Markus | Konferenzbeitrag |
| 2015 | Application-oriented design and field trial of the LPG-powered eneramic® power generator
Reuber, Sebastian; Megel, Stefan; Jürgens, Christian; Pfeifer, Thomas; Bednarz, Marc; Wunderlich, Christian; Michaelis, Alexander | Konferenzbeitrag |
| 2015 | Aufbau und Biofunktionalisierung einer LSPR-Molekülsensorikeinheit
Steinke, Nadja; Wuchrer, Roland; Härtling, Thomas | Konferenzbeitrag |
| 2015 | AUTARTEC® - Technologien zur autarken Wasserver- und Entsorgung
Saft, Franziska; Lincke, Marc; Schulze, Erik; Faßauer, Burkhardt; Michaelis, Alexander | Poster |
| 2015 | Basaltfaserkomposite mit polymer-keramischer Matrix - Entwicklung, Herstellung und Charakterisierung hinsichtlich mechanischer und korrosiver Beanspruchbarkeit
Gößel, Martin
: Schönfeld, Katrin (Betreuer); Feller, Jörg (Betreuer) | Bachelor Thesis |
| 2015 | Basic study on the influence of glass composition and Aluminum content on the Ag/Al paste contact formation to boron emitters
Körner, Stefan; Kiefer, Fabian; Peibst, Robby; Heinemeyer, F.; Krügener, J.; Eberstein, Markus | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2015 | Bauteil hergestellt aus keramischem Werkstoff und Verfahren zu seiner Herstellung
Herrmann, Mathias; Matthey, Björn; Schilm, Jochen | Patent |
| 2015 | Beitrag zur Aufklärung molekularer Wechselwirkungen von organischen Additiven in technischen Korund-Suspensionen
Rödel, Conny
: Michaelis, Alexander | Dissertation |
| 2015 | Beiträge zur Charakterisierung des Prozessablaufes und der Verbindungsbildung beim Mikroschweißen für Hochtemperaturwerkstoffe
Kronsbein, Antje | Diplomarbeit |
| 2015 | Besonderheiten bei der Maßstabsübertragung von Rührprozessen von hochkonzentrierten faserigen Suspensionen
Lomtscher, Annett; Jobst, Karin; Deutschmann, Anne; Rostalski, Kay; Kraume, Matthias | Konferenzbeitrag |
| 2015 | Biegeelementanordnung sowie deren Verwendung
Bramlage, Bernhard; Ernst, Dörthe; Gebhardt, Sylvia | Patent |
| 2015 | Bonefoam network and innovative shaping approach to next-generation bio scaffolds
Ahlhelm, Matthias; Günther, Paul; Scheithauer, Uwe; Schwarzer, Eric; Moritz, Tassilo | Vortrag |
| 2015 | Bulk titanium nitride ceramics - Significant enhancement of hardness by silicon nitride addition, nanostructuring and high pressure sintering
Bläß, Ulrich W.; Barsukova, Tatiana; Schwarz, Marcus; Köhler, Anke; Schimpf, Christian; Petrusha, Igor A.; Mühle, Uwe; Rafaja, David; Kroke, Edwin | Zeitschriftenaufsatz |
| 2015 | Carbide und Oxide als Verschleißschutz - von der Synthese zur thermisch gespritzten Schicht
Berger, Lutz-Michael | Habilitationsschrift |
| 2015 | Carbon nanotubes and carbon nanofibers fabricated on tubular porous Al2O3 substrates
Simon, Adrian; Seyring, M.; Kämnitz, Susanne; Richter, Hannes; Voigt, Ingolf; Rettenmayr, M.; Ritter, U. | Zeitschriftenaufsatz |
| 2015 | CerMeTex - innovative porous and dense metal fiber-ceramic composites for improved and multi-functional component properties on the basis of metal fiber and metal filament structures
Herfert, Heike; Moritz, Tassilo; Günther, Anne; Hofmann, Marcel | Konferenzbeitrag |
| 2015 | CerMeTex - Metall und Keramik wachsen zusammen
Hofmann, Marcel; Herfert, Heike; Günther, Anne; Moritz, Tassilo | Zeitschriftenaufsatz |
| 2015 | CFY-stack technology: The next design
Bienert, Christian; Brandner, Marco; Skrabs, S.; Venskutonis, Andreas; Sigl, L.S.; Megel, Stefan; Beckert, Wieland; Trofimenko, Nikolai; Kusnezoff, Mihails; Michaelis, Alexander | Konferenzbeitrag, Zeitschriftenaufsatz |
| 2015 | Characteristics of a continuous direct foaming technique
Luthardt, Fabian; Adler, Jörg; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2015 | Charakterisierung von Borcarbid als Material für Hochtemperatursensoren
Feng, Bing; Martin, Hans-Peter | Zeitschriftenaufsatz |
| 2015 | Charakterisierung von co-gesinterten Metall-Keramik Verbundfolien
Heilmann, Stefan | Diplomarbeit |
| 2015 | Comment on "High-pressure spark plasma sintering (SPS) of transparent polycrystalline magnesium aluminate spinel (PMAS)" by M. Sokol, S. Kalabukhov, M. P. Dariel, N. Frage [J. Eur. Ceram. Soc. 34 (2014) 4305]
Krell, Andreas | Zeitschriftenaufsatz |
| 2015 | Comment: The effect of grain size on the mechanical and optical properties of spark plasma sintering-processed magnesium aluminate spinel MgAl2O4 (Rothaman et al.)
Krell, Andreas | Zeitschriftenaufsatz |
| 2015 | Comparison of the high-temperature corrosion of aluminium nitride, alumina, magnesia and zirconia ceramics by coal ashes
Himpel, Gert; Herrmann, Mathias; Höhn, Sören | Zeitschriftenaufsatz |
| 2015 | Cost-reduced and environmentally friendly manufacturing of Lithium ion batteries
Wolter, Mareike; Börner, Stefan; Leiva Pinzon, Diana Marcela; Nikolowski, Kristian | Konferenzbeitrag |
| 2015 | Crack detection of ceramics based on the method of laser speckle photometry
Chen, Lili
: Dobmann, Gerd (1. Gutachter); Boller, Christian (2. Gutachter); Cikalova, Ulana (Betreuer) | Master Thesis |
| 2015 | Cross-sectional technologies
Voigtsberger, Bärbel; Rossner, Wolfgang; Lenk, Reinhard; Kinski, Isabel; Scheffler, Michael; Kollenberg, Wolfgang; Guillon, Olivier; Danzer, Robert; Wampers, Holger; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2015 | Demands, potentials and economic aspects of thermal spraying with aqueous solutions
Toma, Filofteia-Laura; Potthoff, Annegret; Leyens, Christoph | Vortrag |
| 2015 | Demands, potentials, and economic aspects of thermal spraying with suspensions: A critical review
Toma, Filofteia-Laura; Potthoff, Annegret; Berger, Lutz-Michael; Leyens, Christoph | Zeitschriftenaufsatz |
| 2015 | Determination of state of charge-dependent asymmetric Butler-Volmer kinetics for LixCoO2 electrode using GITT measurements
Hess, Andreas; Roode-Gutzmer, Quirina; Heubner, Christian; Schneider, Michael; Michaelis, Alexander; Bobeth, Manfred; Cuniberti, Gianaurelio | Zeitschriftenaufsatz |
| 2015 | Development of electrolyte supported cells based on a thin 3YSZ substrate
Trofimenko, Nikolai; Kusnezoff, Mihails; Klemm, D.; Schimanke, Danilo | Konferenzbeitrag, Zeitschriftenaufsatz |
| 2015 | Direct electrocaloric measurements using a differential scanning calorimeter
Sanlialp, Mehmet; Shvartsman, Vladimir V.; Lupascu, Doru Constantin; Molin, Christian; Gebhardt, Sylvia | Konferenzbeitrag |
| 2015 | Eddy current imaging for electrical characterization of silicon solar cells and TCO layers
Hwang, Byungguk; Hillmann, Susanne; Schulze, Martin; Klein, Marcus; Heuer, Henning | Konferenzbeitrag |
| 2015 | Effect of cubic boron nitride grain size in the reinforcing of α-Sialon ceramics sintered via SPS
Garrett, Jethro C.; Sigalas, Iakovos; Wolfrum, Anne-Kathrin; Herrmann, Mathias | Zeitschriftenaufsatz |
| 2015 | Effect of dopants on the electrocaloric effect of 0.92 Pb(Mg1/3Nb2/3)O3–0.08 PbTiO3 ceramics
Molin, Christian; Sanlialp, M.; Shvartsman, Vladimir; Lupascu, Doru Constantin; Neumeister, Peter; Schönecker, Andreas; Gebhardt, Sylvia | Zeitschriftenaufsatz |
| 2015 | Effect of feedstock characteristics and operating parameters on the properties of Cr2O3 coatings prepared by suspension-HVOF spray
Toma, Filofteia-Laura; Scheitz, Stefan; Trache, Richard; Langner, Stefan; Leyens, Christoph; Potthoff, Annegret; Oelschlägel, Kathrin | Konferenzbeitrag |
| 2015 | Effect of oenothera odorata root extract on microgravity and disuse-induced muscle atrophy
Lee, Yong-Hyeon; Seo, Dong-Hyun; Park, Ji Hyung; Kabayama, Kazuya; Opitz, Jörg; Lee, Kwangho; Kim, Han Sung; Kim, Tack-Joong | Zeitschriftenaufsatz |
| 2015 | Effects of powder characteristics and high velocity flame spray processes on Cr3C2-NiCr-coatings
Trache, Richard; Toma, Filofteia-Laura; Leyens, Christoph; Berger, Lutz-Michael; Thiele, Sven; Michaelis, Alexander | Konferenzbeitrag |
| 2015 | Effiziente Einbindung räumlich verteilter Modelle in Multiphysik-Netzwerke
Ziske, Johannes; Neubert, Holger | Konferenzbeitrag |
| 2015 | Die Eignung von keramischen Pulvern und keramischen Formstoffkombinationen beim Stahlgießen von Gussprodukten
Gerner, Norman
: Tonn, Babette (Prüfer); Palkowski, Heinz (Prüfer); Martin, Hans-Peter (Betreuer); Schönfeld, Katrin (Betreuer) | Master Thesis |
| 2015 | Einfluss des Energieeintrages bei der Suspensionsherstellung auf die Stabilität hochkonzentrierter Aluminiumoxid-Schlicker
Meyer, Anja; Rödel, Conny | Aufsatz in Buch |
| 2015 | Electrical characterization of thick film materials
Rebenklau, Lars; Gierth, Paul; Grießmann, Horst | Konferenzbeitrag |
| 2015 | Electrochemical corrosion of silicon-infiltrated silicon carbide ceramics in aqueous solutions
Herrmann, Mathias; Sempf, Kerstin; Kremmer, Kerstin; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2015 | Electrochemical MEA characterization
Kusnezoff, Mihails; Beckert, Wieland; Trofimenko, Nikolai; Jacobs, B.; Dosch, Christian; Megel, Stefan; Rachau, M.; Wieprecht, C.; Gipp, D. | Konferenzbeitrag |
| 2015 | Elektrokalorische Anordnung
Neumeister, Peter | Patent |
| 2015 | Entwicklung einer extrudierfähigen kaltplastischen Masse auf Basis von Aluminiumoxid
Tscharntke, Franziska | Diplomarbeit |
| 2015 | Entwicklung eines Siliziumnitrid-Werkstoffes für Rotoren in Mikrogasturbinen
Kunz, Willy | Zeitschriftenaufsatz |
| 2015 | Entwicklung porositätsgradierter Strukturen auf Basis von Zirkoniumdioxid über die Kombination von Additiver Fertigung und Gefrier-Direktschäumung
Günther, Paul
: Liersch, Antje (1. Gutachter); Klein, Gernot (2. Gutachter); Moritz, Tassilo (Betreuer) | Master Thesis |
| 2015 | Entwicklung und Evaluierung von Metallisierungen mit partikelfreien/-haltigen Tinten mit Inkjet- und Aerosol-Druck
Hildebrandt, Stefanie
: Michaelis, Alexander | Dissertation |
| 2015 | Entwicklung und Modellierung eines Verfahrenskonzepts zur Kopplung von Biogaserzeugung und Fischer-Tropsch-Synthese für die Herstellung chemischer Produkte
Presser, André | Diplomarbeit |
| 2015 | Entwicklung von reproduzierbaren Modellsystemen unterschiedlich belasteter Grauwässer für die labortechnische Bewertung von AOP-Prozessen
Gyenes, Adrian
: Kühn, Volker (Betreuer); Schalk, Thomas (Betreuer); Lincke, Marc (Betreuer); Krebs, Peter (Verantw. Hochschullehrer) | Master Thesis |
| 2015 | Entwicklung von Sodalithmembranen für die Gastrennung unter industriellen Bedingungen
Günther, Christiane
: Michaelis, Alexander | Dissertation |
| 2015 | Entwicklung wirtschaftlich effizienter Hartmetallbeschichtungslösungen für Hochtemperaturanwendungen. Teil 1: Beschichtungspulver, Wirtschaftlichkeit und Schichteigenschaften
Berger, Lutz-Michael; Trache, Richard; Toma, Filofteia-Laura; Thiele, Sven; Norpoth, Jonas; Janka, Leo | Zeitschriftenaufsatz |
| 2015 | Erratum to “A simple phenomenological model for magnetic shape memory actuators”
Ziske, Johannes; Ehle, Fabian; Neubert, Holger; Price, Aaron D.; Lienig, Jens | Zeitschriftenaufsatz |
| 2015 | Estimating blood sugar from voice samples - A preliminary study
Tschöpe, Constanze; Duckhorn, Frank; Wolff, Matthias; Saeltzer, Gerhard | Konferenzbeitrag |
| 2015 | Ethanol steam reforming over bimetallic coated ceramic foams: Effect of reactor configuration and catalytic support
Palma, Vincenzo; Ruocco, Concetta; Castaldo, Filomena; Ricca, Antonio; Böttge, Daniela | Zeitschriftenaufsatz |
| 2015 | EU-Network BONEFOAM and recent activities in manufacturing ceramics and metal-ceramic composites for biomedical applications
Ahlhelm, Matthias; Günther, Paul; Scheithauer, Uwe; Schwarzer, Eric; Günther, A.; Slawik, T.; Moritz, Tassilo; Michaelis, Alexander | Vortrag |
| 2015 | Evaluation of alumina as protective coating for carbon fibers in magnesium-based composites
Abidin, Alfaferi Zainal; Wolf, Michel; Krug, Mario; Endler, Ingolf; Knaut, Martin; Höhn, Mandy; Michaelis, Alexander | Konferenzbeitrag |
| 2015 | Evaluation of piezo composite based omnidirectional single fibre transducers for 3D USCT
Zapf, Michael; Hohlfeld, Kai; Shah, Gourav; Gebhardt, Sylvia; Dongen, Koen W.A. van; Gemmeke, Hartmut; Michaelis, Alexander; Ruiter, Nicole V. | Konferenzbeitrag |
| 2015 | Experimentelle und modellbasierte Untersuchungen zum Einfluss der Granulatstruktur auf die mechanischen Granulateigenschaften
Eckhard, Susanna
: Heinrich, Stefan (Gutachter); Teipel, Ulrich (Gutachter); Fries, Manfred (Gutachter) | Dissertation |
| 2015 | Festkommaportierung des generalisierten Mel-Cepstrum
Becker, Arnulf
: Wolff, Matthias (Betreuender Hochschullehrer); Duckhorn, Frank (Betreuer) | Bachelor Thesis |
| 2015 | A field investigation on transport of carbon-supported nanoscale zero-valent iron (nZVI) in groundwater
Busch, Jan; Meißner, Tobias; Potthoff, Annegret; Bleyl, Steffen; Georgi, Anett; Mackenzie, Katrin; Trabitzsch, Ralf; Werban, Ulrike; Oswald, Sascha | Zeitschriftenaufsatz |
| 2015 | Formation of carbide segregations in nanoscaled hardmetals
Pötschke, Johannes; Mayer, Markus; Richter, Volkmar | Poster |
| 2015 | Fortschritte in der Metallographie
: Schneider, Gerhard (Hrsg.); Zschech, Ehrenfried (Hrsg.); Petzow, Günter (Hrsg.) | Tagungsband |
| 2015 | Fraunhofer Institute for Ceramic Technologies and Systems. Annual Report 2014/2015
| Jahresbericht |
| 2015 | Fraunhofer-Institut für Keramische Technologien und Systeme. Jahresbericht 2014/2015
| Jahresbericht |
| 2015 | Friction and wear of TiN-Si3N4 nanocomposites against ShKh15 steel
Kolesnichenko, V.G.; Zgalat-Lozynskii, Ostap; Varchenko, V.T.; Herrmann, Mathias; Ragulya, Andrey | Zeitschriftenaufsatz |
| 2015 | From high-performance to super-high-performance materials in a composite
Herfert, Heike; Hofmann, Marcel; Günther, Anne | Zeitschriftenaufsatz |
| 2015 | Fundamentals of sintering nanoscaled binderless hardmetals
Pötschke, Johannes; Richter, Volkmar; Michaelis, Alexander | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2015 | Future potential of high-performance ceramics
Voigtsberger, Bärbel; Rossner, Wolfgang; Joachim, Klemens; Lenk, Reinhard; Hartmann, Martin | Zeitschriftenaufsatz |
| 2015 | Glass phase alignment in front side pastes for P- and N-type solar cells
Eberstein, Markus; Reinhardt, Kathrin; Körner, Stefan; Kiefer, Fabian; Peibst, Robby | Konferenzbeitrag |
| 2015 | Gleichzeitige Vermessung der lateralen und vertikalen Linsenausdehnung sowie Charakterisierung von Punktschweißverbindungen mittels Ultraschallmikroskopie
Hipp, Raffael; Gommlich, Andreas; Schubert, Frank | Konferenzbeitrag |
| 2015 | Hartmetallschichten auf der Basis von TiC - eine Alternative zum Stand der Technik?
Berger, Lutz-Michael | Zeitschriftenaufsatz |
| 2015 | High performance front side pastes by Ag precursor equipped glasses
Eberstein, Markus; Körner, Stefan | Konferenzbeitrag |
| 2015 | High performance PZT thick film actuators using in plane polarisation
Ernst, Dörthe; Bramlage, Bernhard; Gebhardt, Sylvia; Schönecker, Andreas | Zeitschriftenaufsatz |
| 2015 | High-frequency eddy current based impedance spectroscopy for characterization of the percolation process of wet conductive coatings
Patsora, Iryna; Hillmann, Susanne; Heuer, Henning; Foos, Bryan C.; Calzada, Juan G. | Konferenzbeitrag |
| 2015 | High-performance ceramics for mobility, electrical engineering/optics and life sciences
Voigtsberger, Bärbel; Rossner, Wolfgang; Lenk, Reinhard; Lindemann, Gert; Koch, Thomas; Alkemade, Ulrich; Schweinzger, Manfred; Höge, Michael; Fischer, Horst; Kelnberger, Alfons; Oberbach, Thomas | Zeitschriftenaufsatz |
| 2015 | High-performance ceramics for power, chemical, machine and plant engineering
Voigtsberger, Bärbel; Rossner, W.; Stelter, Michael; Topfer, J.; Eichler, J.; Voigt, Ingolf; Voss, H. | Zeitschriftenaufsatz |
| 2015 | High-temperature stability of microstructure defects in graphitic boron nitride subjected to the field assisted sintering
Schimpf, Christian; Schumann, H.; Räthel, Jan; Herrmann, Mathias; Rafaja, David | Zeitschriftenaufsatz |
| 2015 | HiTEG (Mat + AVT) - Hochtemperaturgeneratoren für die Abwärmenutzung in Fahrzeugen und Industriebrenneranlagen. Abschlussbericht
Martin, Hans-Peter; Kinski, Isabel; Schilm, Jochen; Wätzig, Katja; Pönicke, Andreas; Conze, Susan; Rost, Axel | Bericht |
| 2015 | Hochleistungskeramiken für Energie, Chemie sowie Maschinen- und Anlagenbau
Voigtsberger, Bärbel; Rossner, Wolfgang; Stelter, Michael; Töpfer, Jörg; Eichler, Jens; Voigt, Ingolf; Voss, Hartwig | Zeitschriftenaufsatz |
| 2015 | Impact of trace elements and impurities in technical zero-valent iron brands on reductive dechlorination of chlorinated ethenes in groundwater
Birke, Volker; Schuett, Christine; Burmeier, Harald; Friedrich, Hans-Jürgen | Aufsatz in Buch |
| 2015 | In situ time-dependent dielectric breakdown in the transmission electron microscope: A possibility to understand the failure mechanism in microelectronic devices
Liao, Zhongquan; Gall, Martin; Yeap, Kong Boon; Sander, Christoph; Clausner, André; Mühle, Uwe; Gluch, Jürgen; Standke, Gisela; Aubel, Oliver; Beyer, Armand; Hauschildt, Meike; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2015 | In-situ study of the TDDB-induced damage mechanism in Cu/ultra-low-k interconnect structures
Liao, Zhongquan; Gall, Martin; Yeap, Kong Boon; Sander, Christoph; Mühle, Uwe; Gluch, Jürgen; Standke, Yvonne; Aubel, Oliver; Vogel, Norman; Hauschildt, Meike; Beyer, Armand; Engelmann, Hans Jürgen; Zschech, Ehrenfried | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2015 | Industrial inert drying system for high efficiency heterojunction solar cells
Schörner, S.; Clement, C.; Bell, H.; Gierth, Paul; Rebenklau, Lars | Konferenzbeitrag |
| 2015 | The influence of different pre-treatments of current collectors and variation of the binders on the performance of Li4Ti5O12 anodes for lithium ion batteries
Wennig, Sebastian; Langklotz, Ulrike; Prinz, Günther M.; Schmidt, A.; Oberschachtsiek, Bernd; Lorke, Axel; Heinzel, Angelika | Zeitschriftenaufsatz |
| 2015 | Influence of different sintering techniques on microstructure and phase composition of oxygen-transporting ceramic
Ravkina, Olga; Räthel, Jan; Feldhoff, Armin | Zeitschriftenaufsatz |
| 2015 | Influence of electrochemical potentials on the tribological behavior of silicon carbide and diamond-coated silicon carbide
Amann, Tobias; Kailer, Andreas; Herrmann, Mathias | Zeitschriftenaufsatz |
| 2015 | Ink jet printable silver metallization with zinc oxide for front side metallization for micro crystalline silicon solar cells
Jurk, Robert; Fritsch, Marco; Eberstein, Markus; Schilm, Jochen; Uhlig, Florian; Waltinger, Andreas; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2015 | Innovative keramische Werkstoff- und Verfahrenskonzepte zur Erschließung neuer anspruchsvoller Applikationen in Optik und Elektronik
Reichel, Uwe; Schubert, Ralf | Zeitschriftenaufsatz |
| 2015 | Innovative shaping approach for manufacturing personalized bone replacement materials
Ahlhelm, Matthias; Günther, Paul; Schwarzer, Eric; Scheithauer, Uwe; Moritz, Tassilo | Vortrag |
| 2015 | Integration of CaCu3Ti4O12 capacitors into LTCC multilayer modules
Löhnert, Romy; Capraro, Beate; Barth, Stefan; Bartsch, Heike; Müller, Jens; Töpfer, Jörg | Zeitschriftenaufsatz |
| 2015 | Interaction of perovskite type lanthanum-calcium-chromites-titanates La1-xCaxCr1-yTiyO3-δ with solid electrolyte materials
Belda, Charif; Dietzen, Egle; Kusnezoff, Mihails; Trofimenko, Nikolai; Vashook, Uladimir; Michaelis, Alexander; Guth, Ulrich | Konferenzbeitrag |
| 2015 | Interface phenomena of co-sintered steel-zirconia laminates
Bergner, Anne; Moritz, Tassilo; Michaelis, Alexander | Konferenzbeitrag |
| 2015 | Investigation of charge transfer kinetics of Li-Intercalation in LiFePO4
Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2015 | Investigation of Eddy Current examination on OD fatigue crack for steam generator tubes
Kong, Yuying; Ding, Boyuan; Li, Ming; Liu, Jinhong; Chen, Huaidong; Meyendorf, Norbert G. | Konferenzbeitrag |
| 2015 | Investigation of inhomogeneous shrinkages of partially crystallizing Low Temperature Co-fired Ceramics (LTCC)
Lenz, Christian; Kappert, Sandro; Ziesche, Steffen; Neubert, Holger; Partsch, Uwe | Konferenzbeitrag |
| 2015 | Investigation of thermal shock behaviour of refractory ceramics based on the calcium-aluminate
Zhang, W.; Doynov, N.; Ossenbrink, R.; Michailov, V.; Scheithauer, U.; Michaelis, A. | Abstract |
| 2015 | Investigations of PMN-PT composites for high sensitive ultrasonic phased array probes in NDE
Walter, Susan; Herzog, Thomas; Schubert, Frank; Heuer, Henning; Han, Tae-Young; Lee, Sang-Goo; Chae, Hee Man; Joh, Cheeyoung; Seo, Hee-Seon | Konferenzbeitrag |
| 2015 | Katalysierte Filter für Einzelraumfeuerstätten
Petasch, Uwe; Adler, Jörg; Striegler, Uwe | Konferenzbeitrag |
| 2015 | Keramik für Filtrationsanwendungen
Adler, Jörg; Kriegel, Ralf; Petasch, Uwe; Richter, Hannes; Voigt, Ingolf; Weyd, M. | Konferenzbeitrag |
| 2015 | Kinetics in the stabilization of polyacrylonitrile
Meinl, Juliane; Gestrich, Tim; Kirsten, Martin; Cherif, Chokri; Michaelis, Alexander | Konferenzbeitrag |
| 2015 | Kombiniertes Katalysator- und Sauerstoffträgersystem zur Aufbereitung teerhaltiger Brenngase aus der Biomassevergasung via partieller Oxidation
Böhning, Dorith; Beckmann, Michael; Kriegel, Ralf; Richter, Jörg; Ma, Mingshui; Müller, Michael M. | Zeitschriftenaufsatz |
| 2015 | Konversionselement für ein optisches oder optoelektronisches Bauelement und Verfahren zu seiner Herstellung
Wätzig, Katja; Kinski, Isabel | Patent |
| 2015 | Lab-based in-situ X-ray microscopy - methodical developments and applications in materials science and microelectronics
Niese, Sven
: Schmeißer, Dieter (Gutachter); Zschech, Ehrenfried (Gutachter); Schneider, Gerd (Gutachter) | Dissertation |
| 2015 | Labortechnische Untersuchungen zu Möglichkeiten der bedarfsgerechten Biogaserzeugung durch zielgerichtete Verfahrensführung
Kidszun, Claudyn | Diplomarbeit |
| 2015 | Large-scale ceramic support fabrication for palladium membranes
Richter, Hannes | Aufsatz in Buch |
| 2015 | Lateral damage in graphene carved by high energy focused gallium ion beams
Liao, Zhongquan; Zhang, Tao; Gall, Martin; Dianat, Arezoo; Rosenkranz, Rüdiger; Jordan, Rainer; Cuniberti, Gianaurelio; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2015 | Light-field-characterization in a continuous hydrogen-producing photobioreactor by optical simulation and computational fluid dynamics
Krujatz, Felix; Illing, Rico; Krautwer, Tobias; Liao, Jing; Helbig, Karsten; Goy, Katharina; Opitz, Jörg; Cuniberti, Gianaurelio; Bley, Thomas; Weber, Jost | Zeitschriftenaufsatz |
| 2015 | Local heat generation in a single stack lithium ion battery cell
Heubner, Christian; Schneider, Michael; Lämmel, C.; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2015 | Magnéli phases Ti4O7 and Ti8O15 and their carbon nanocomposites via the thermal decomposition-precursor route
Conze, Susan; Veremchuk, Igor; Reibold, Marianne; Matthey, Björn; Michaelis, Alexander; Grin, Juri; Kinski, Isabel | Zeitschriftenaufsatz |
| 2015 | Material requirements for power and high temperature multilayer ceramic capacitors (MLCC)
Engel, G.F. | Konferenzbeitrag |
| 2015 | Measuring and imaging permittivity of insulators using high-frequency eddy-current devices
Gäbler, Simone; Heuer, Henning; Heinrich, Gert | Zeitschriftenaufsatz |
| 2015 | Membrantrennverfahren und Membrananlage zur energieeffizienten Erzeugung von Sauerstoff
Kriegel, Ralf | Patent |
| 2015 | Messung der Lumineszenzantwort an Einzelpartikeln von Aufkonversionsmaterialien
Gaska, Florian
: Schuster, Christiane (Betreuer); Jugelt, Peter (Betreuer) | Bachelor Thesis |
| 2015 | Micro powder injection moulding: Processes, materials and applications
Piotter, Volker; Moritz, Tassilo | Zeitschriftenaufsatz |
| 2015 | Micro-positioning stages for adaptive optics based on piezoelectric thick film actuators
Gebhardt, Sylvia; Ernst, Dörthe; Bramlage, Bernhardt | Konferenzbeitrag |
| 2015 | Micro-positioning stages for adaptive optics based on piezoelectric thick film actuators
Gebhardt, Sylvia; Ernst, Dörthe; Bramlage, Bernhardt; Pabst, Oliver; Oberdörster, Alexander | Zeitschriftenaufsatz |
| 2015 | Microstructure and electric properties of CaCu3Ti4O12 multilayer capacitors
Löhnert, Romy; Bartsch, Heike; Schmidt, Rainer; Capraro, Beate; Töpfer, Jörg | Zeitschriftenaufsatz |
| 2015 | Modellgestützte Konzeption und Aufbau eines Demonstrators für neuartige keramische fluidische Mischerstrukturen durch Folientechnologie
Körnig, André
: Lange, Rüdiger (Betreuender Hochschullehrer); Bauer, Tobias (Betreuer); Beckert, Wieland (Betreuer); Scheithauer, Uwe (Betreuer) | Diplomarbeit |
| 2015 | Modellierungsansätze und neue Brennhilfsmittelkonzepte für die LTCC-Drucksintertechnologie
Brandt, Björn
: Michaelis, Alexander (Gutachter); Rabe, Torsten (Betreuer); Roosen, Andreas (Gutachter) | Dissertation |
| 2015 | Möglichkeiten zur Effizienzsteigerung im Revisions- und Störfall-Management im Kraftwerk
Hillmann, Susanne; Bor, Zsolt; Schiller-Bechert, David-Maximilian; Uhlemann, Frank | Konferenzbeitrag |
| 2015 | Multi-fuelled solar steam reforming for pure hydrogen production using solar salts as heat transfer fluid
Giaconia, Alberto; Monteleone, G.; Morico, B.; Salladini, A.; Shabtai, K.; Sheintuch, M.; Böttge, Daniela; Adler, Jörg; Palma, V.; Voutetakis, S.; Lemonidou, A.; Annesini, M.C.; Exter, M. den; Balzer, H.; Turchetti, L. | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2015 | Multi-scale material modelling of glass-ceramics
Greiner, Anna; Neumeister, Peter | Vortrag |
| 2015 | Nanoskalige Werkzeugwerkstoffe für Fertigungsaufgaben im Maschinenbau
Pötschke, Johannes | Abstract |
| 2015 | Nanostructured WC-Co hardmetal as reference material for high hardness range
Aleksandrov Fabijanić, Tamara; Alar, Željko; Pötschke, Johannes | Konferenzbeitrag |
| 2015 | New lightweight kiln furniture made by combination of ceramic green tapes and extrudates
Scheithauer, Uwe; Schwarzer, Eric; Tscharntke, Franziska; Schmidt, Tobias; Jegust, Stephan; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2015 | New piezo material and its applications for energy harvesting and ultrasound probe
Lee, S.-G.; Lee, J.-H.; Lee, K.-J.; Chae, H.M.; Joh, C.Y.; Seo, H.S.; Heuer, H.; Herzog, T. | Konferenzbeitrag |
| 2015 | Non-contact printing: Conductive track geometry affected by ink rheology and composition
Hildebrandt, Stefanie; Kinski, Isabel; Mosch, Sindy; Waltinger, Andreas; Uhlig, Florian; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2015 | Novel ceramic foam-scaffolds for personalized bone replacement
Ahlhelm, Matthias; Günther, Paul; Schwarzer, Eric; Scheithauer, Uwe; Lausch, H.; Moritz, Tassilo | Vortrag |
| 2015 | Novel foam structures for personalized bone replacement materials
Ahlhelm, Matthias; Günther, P.; Scheithauer, Uwe; Schwarzer, E.; Gorjup, Erwin; Briesen, Hagen von; Moritz, Tassilo; Michaelis, Alexander | Vortrag |
| 2015 | Novel functional structures and structural combinations by additive manufacturing
Moritz, Tassilo; Scheithauer, Uwe; Schwarzer, Eric; Ahlhelm, Matthias; Günther, Paul; Richter, Hans-Jürgen | Zeitschriftenaufsatz |
| 2015 | Novel thermoelectric temperature sensors
Rebenklau, Lars; Irrgang, Klaus; Wodke, Axel; Augsburg, K.; Bechtold, Franz; Gierth, Paul; Grießmann, Horst; Lippmann, Lutz; Niedermeyer, Lars | Konferenzbeitrag |
| 2015 | Online and non-invasive investigation of bubble columns with electrical resistance tomography (ERT)
Fogel, Stefan; Deutschmann, Anne; Jobst, Karin; Michaelis, Alexander | Vortrag |
| 2015 | Optimization of Spark Plasma Sintering tooling design
Giuntini, Diletta; Olevsky, Eugene Al; Räthel, Jan; Herrmann, Mathias; Michaelis, Alexander | Konferenzbeitrag |
| 2015 | Optische Funktionsschichten. Antireflex-Beschichtung auf transparenten Keramiken
Reichel, Uwe; Kinski, Isabel | Zeitschriftenaufsatz |
| 2015 | The oxidized state of the nanocomposite Carbo-Iron® causes no adverse effects on growth, survival and differential gene expression in zebrafish
Weil, Mirco; Meißner, Tobias; Busch, Wibke; Springer, Armin; Kühnel, Dana; Schulz, Ralf; Duis, Karen | Zeitschriftenaufsatz |
| 2015 | Performance of an open thermal adsorption storage system with Linde type A zeolites: Beads versus honeycombs
Jänchen, Jochen; Herzog, Thomas H.; Gleichmann, Kristin; Unger, Baldur; Brandt, Alfons; Fischer, Gundula; Richter, Hannes | Zeitschriftenaufsatz |
| 2015 | Phased array ultrasonic testing of dissimilar metal welds using geometric based referencing delay law technique
Han, Tae-Young; Schubert, Frank; Hillmann, Susanne; Meyendorf, Norbert | Konferenzbeitrag |
| 2015 | Phasenbildungsmechanismen in Stahl-Keramik-Werkstoffverbunden
Günther, Anne; Slawik, Tim; Moritz, Tassilo; Mühle, Uwe; Michaelis, Alexander | Konferenzbeitrag |
| 2015 | Potential applications of hybrid-heated FAST/SPS technology
Räthel, Jan; Hennicke, Jürgen; Herrmann, Mathias | Zeitschriftenaufsatz |
| 2015 | Potentials of nanostructured WC-Co hardmetal as reference material for Vickers hardness
Fabijanić, Tamara Aleksandrov; Alar, Željko; Pötschke, Johannes | Zeitschriftenaufsatz |
| 2015 | Preparation and characterization of CVD-TiN-coated carbon fibers for applications in metal matrix composites
Abidin, Alfaferi Zainal; Kozera, Rafał; Höhn, Mandy; Endler, Ingolf; Knaut, Martin; Boczkowska, Anna; Czulak, Andrzej; Malczyk, Piotr; Sobczak, Natalia; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2015 | Preparation and characterization of silicon nanowires using SEM/FIB and TEM
Banerjee, Sayanti; Mühle, Uwe; Löffler, Markus; Heinzig, André; Trommer, Jens; Zschech, Ehrenfried | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2015 | Process monitoring for resins, carbon fiber fabrics, preforms and consolidated CFRPs by HF radio wave techniques
Heuer, Henning; Schulze, Martin; Pooch, Matthias; Gäbler, Simone; Kupke, Richard | Konferenzbeitrag |
| 2015 | Production of higher alcohols from synthesis gas
Schaller, Max; Reichelt, Erik; Männel, Dorothea; Jahn, Matthias | Konferenzbeitrag |
| 2015 | Production process for new lightweight kiln furniture
Scheithauer, U.; Slawik, T.; Schwarzer, E.; Tscharntke, F.; Schmidt, T.; Jegust, S.; Richter, H.-J.; Moritz, T.; Michaelis, A. | Konferenzbeitrag |
| 2015 | Prüfstand zur Untersuchung des ferroelektromechanischen Materialverhaltens an piezokeramischen Probekörpern unter Mehrfeldbelastung
Hermsdorf, Manja | Diplomarbeit |
| 2015 | Pulse plating of manganese oxide nanoparticles on aligned MWCNT
Schneider, Michael; Weiser, Mathias; Schrötke, Carl; Meißner, Frank; Endler, Ingolf; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2015 | Pulvermetallurgie: Effiziente Prozesse - besondere Eigenschaften
: Kolaska, Hans (Hrsg.); Danninger, Herbert (Hrsg.); Gestrich, Tim (Hrsg.) | Tagungsband |
| 2015 | PZT components derived from polysulphone spinning process
Hohlfeld, Kai; Gebhardt, Sylvia; Schönecker, Andreas; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2015 | Qualification and quantification of mixing processes of highly concentrated suspensions using electrical resistance tomography
Lomtscher, Annett; Jobst, Karin; Fogel, Stefan; Deutschmann, Anne; Rostalski, Kay; Kraume, Matthias | Konferenzbeitrag |
| 2015 | Quantitatively analyzing dielectrical properties of resins and mapping permittivity variations in CFRP with high-frequency eddy current device technology
Gäbler, Simone; Heuer, Henning; Heinrich, Gert; Kupke, Richard | Konferenzbeitrag |
| 2015 | Radio frequency microelectromechanical system-platform based on silicon-ceramic composite substrates
Fischer, Michael S.; Gropp, S.; Nowak, Jacek; Capraro, Beate; Sommer, Ralf; Hoffmann, Martin J.F.; Müller, J. | Zeitschriftenaufsatz |
| 2015 | Reactive and non-reactive preparation of B6O materials by FAST/SPS
Thiele, Maik; Herrmann, Mathias; Müller, C.; Gestrich, Tim; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2015 | Reaktionstechnische Untersuchungen an Co- und Fe-basierten Katalysatorsystemen für die Fischer-Tropsch-Synthese
Schneider, Annemarie | Diplomarbeit |
| 2015 | Reliability study on SMD components on an organic substrate with a thick copper core for power electronics applications
Meier, Karsten; Röllig, Mike; Bock, K. | Konferenzbeitrag |
| 2015 | Requirements on glasses for femtosecond-laser bases micro-structuring
Seuthe, Thomas; Grehn, Moritz; Mermillod-Blondin, Alexandre; Bonse, Jörn; Eberstein, Markus | Konferenzbeitrag |
| 2015 | Review on quality assurance along the CFRP value chain - non-destructive testing of fabrics, preforms and CFRP by HF radio wave techniques
Heuer, Henning; Schulze, Martin; Pooch, Matthias; Gäbler, Simone; Nocke, Andreas; Bardl, Georg; Cherif, Chokri; Klein, Marcus; Kupke, Richard; Vetter, Richard; Lenz, Florian; Kliem, M.; Bülow, C.; Goyvaerts, J.; Mayer, T.; Petrenz, S. | Zeitschriftenaufsatz |
| 2015 | Rheological properties of silver filled polymer suspensions and their effects on printing performance
Reinhardt, Kathrin; Eberstein, Markus; Hübner, Nancy; Saphiannikova, Marina | Poster |
| 2015 | Riss- und Schadenssanierung von Betonwerkstein mittels Expansionstechnologie
Hoyer, Thomas | Aufsatz in Buch |
| 2015 | Screen-printed ultrasonic 2-D matrix array transducers for microparticle manipulation
Qiu, Yongqiang; Wang, Han; Gebhardt, Sylvia; Bolhovitins, Aleksandrs; Démoré, Christine; Schönecker, Andreas; Cochran, Sandy | Zeitschriftenaufsatz |
| 2015 | SEI-component formation on sub 5 nm sized silicon nanoparticles in Li-ion batteries: The role of electrode preparation, FEC addition and binders
Jaumann, Tony; Balach, Juan; Klose, Markus; Oswald, Steffen; Langklotz, Ulrike; Michaelis, Alexander; Eckert, Jürgen; Giebeler, Lars | Zeitschriftenaufsatz |
| 2015 | A simple phenomenological model for magnetic shape memory actuators
Ziske, Johannes; Ehle, Fabian; Neubert, Holger; Price, Aaron D.; Lienig, Jens | Zeitschriftenaufsatz |
| 2015 | Sliding wear investigation of suspension sprayed WC-Co nanocomposite coatings
Ahmed, Rehan R.; Ali, O.; Faisal, Nadimul Haque; Al-Anazi, N.M.; Al-Mutairi, Saleh H.; Toma, Filofteia-Laura; Berger, Lutz-Michael; Potthoff, Annegret; Goosen, Mattheus F.A. | Zeitschriftenaufsatz |
| 2015 | Solder wettability and solder joint reliability of rapid thermal firing thick film pastes
Gierth, Paul; Rebenklau, Lars | Konferenzbeitrag |
| 2015 | Spezielle Anwendungen der Transmissionselektronenmikroskopie in der Siliziumhalbleiterindustrie
Mühle, Uwe
: Rafaja, David (Betreuer); Lichte, Hannes (Gutachter); Zschech, Ehrenfried (Gutachter) | Habilitationsschrift |
| 2015 | Spurenstoffelimination und Desinfektion in Abwässern mit immobilisiertem TiO2-Photokatalysator
Schulze, Erik; Saft, Franziska; Faßauer, Burkhard; Adler, Jörg; Michaelis, Alexander | Konferenzbeitrag |
| 2015 | Spurenstoffelimination und Desinfektion mit immobilisiertem Titanoxid
Schulze, Erik | Vortrag |
| 2015 | Spurenstoffelimination und Desinfektion mit immobilisiertem Titanoxid
Schulze, Erik; Saft, Franziska; Faßauer, Burkhardt; Adler, Jörg; Michaelis, Alexander | Poster |
| 2015 | Structure property relationship of suspension thermally sprayed WC-Co nanocomposite coatings
Ahmed, Rehan R.; Faisal, N.H.; Al-Anazi, Nayef; Al-Mutairi, S.; Toma, Filofteia-Laura; Berger, Lutz-Michael; Potthoff, Annegret; Polychroniadis, E.K.; Sall, M.; Chaliampalias, D.; Goosen, Mattheus F.A. | Zeitschriftenaufsatz |
| 2015 | Strukturelle Änderungen in Silicatgläsern unterschiedlicher Komposition durch Bestrahlung mit Femtosekunden-Laserpulsen
Seuthe, Thomas
: Eberstein, Markus (Betreuer); Michaelis, Alexander (Gutachter); Wondraczek, Lothar (Gutachter) | Dissertation |
| 2015 | Strukturkeramik für elektrische Anwendungen
Zschippang, Eveline; Martin, Hans-Peter; Lankau, Volkmar; Klemm, Hagen; Herrmann, Mathias; Michaelis, Alexander | Aufsatz in Buch |
| 2015 | Study of carbon-fiber-reinforced polymers conductivity's dependence on a mechanical strain
Kharabet, Ievgen; Patsora, Iryna; Heuer, Henning; Joneit, Dieter; Tatarchuk, Dmytro | Konferenzbeitrag |
| 2015 | Study of the separation properties of FAU membranes constituted by hierarchically assembled nanozeolites
Mastropietro, Teresa F.; Brunetti, Adele; Zito, Pasquale F.; Poerio, Teresa; Richter, Hannes; Weyd, Marcus; Wöhner, Steffen; Drioli, Enrico; Barbieri, Guiseppe | Zeitschriftenaufsatz |
| 2015 | Substrate integrated MM-wave antenna utilizing metalized cavity walls
Balcells-Ventura, J.; Leiss, J.; Uhlig, P.; Ihle, M.; Ziesche, S.; Bisognin, A.; Luxey, C. | Konferenzbeitrag |
| 2015 | Surface preparation for ceramics functionalization by thermal spraying
Scheitz, Stefan; Toma, Filofteia-Laura; Kuntze, Thomas; Leyens, Christoph; Thiele, Sven | Konferenzbeitrag |
| 2015 | Suspensionsgespritzte keramische Schichten: Das Potential einer neuen Spritztechnologie
Toma, Filofteia-Laura; Potthoff, Annegret; Langner, Stefan; Kulissa, Nick; Trache, Richard; Leyens, Christoph | Vortrag |
| 2015 | Synthese von Edelmetalltinten für den Inkjetdruck funktioneller Schichten mit dem Anwendungsbeispiel der Frontseitenmetallisierung kristalliner Solarzellen
Jurk, Robert
: Michaelis, Alexander | Dissertation |
| 2015 | Synthesis and characterization of a sulfur containing hydroxy sodalite without sulfur radicals
Günther, Christiane; Richter, Hannes; Voigt, Ingolf; Michaelis, Alexander; Tzscheutschler, Hendrik; Krause-Rehberg, Reinhard; Serra, Jose M. | Zeitschriftenaufsatz |
| 2015 | System und Verfahren zur zerstörungsfreien Prüfung von Metallschmelzschweißverbindungen an dünnwandigen Rohren
Uhlemann, Frank; Hillmann, Susanne; Schiller-Bechert, David Maximilian; Bor, Zsolt | Patent |
| 2015 | Ein systemtechnischer Ansatz zur ein- und multikriteriellen Optimierung von Energiesystemen am Beispiel der SOFC-Prozesssynthese
Reuber, Sebastian
: Michaelis, Alexander | Dissertation |
| 2015 | TEM study of schottky junctions in reconfigurable silicon nanowire devices
Banerjee, Sayanti; Löffler, Markus; Mühle, Uwe; Berent, Katarzyna; Heinzig, A.; Trommer, J.; Weber, Walter; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2015 | Temperature sensors based on thermoelectric effect
Rebenklau, Lars; Gierth, Paul; Paproth, Angelika; Wodtke, Axel; Niedermeier, Lars; Augsburg, Klaus; Bechtold, Franz; Irrgang, Klaus; Lippmann, Lutz | Konferenzbeitrag |
| 2015 | Thermoelektrische Werkstoffe und Generatoren - aktueller Entwicklungsstand und zukünftige Potenziale für die Abwärmenutzung
Weißgärber, Thomas; Pacheco, Vincente; Recknagel, Carmen; Pöhle, Georg; Martin, Hans-Peter; Schilm, Jochen; Pönicke, Andreas; Feng, Bing; Kieback, Bernd; Michaelis, Alexander | Konferenzbeitrag |
| 2015 | Thermoplastic 3D printing - An additive manufacturing method for producing dense ceramics
Scheithauer, Uwe; Schwarzer, Eric; Richter, Hans-Jürgen; Moritz, Tassilo | Zeitschriftenaufsatz |
| 2015 | TiOx based thermoelectric modules - manufacturing, properties and operational behavior
Schilm, Jochen; Pönicke, Andreas; Kluge, Martin; Sichert, Ina; Martin, Hans-Peter; Michaelis, Alexander | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2015 | Towards sensible toxicity testing for nanomaterials: Proposal for the specification of test design
Potthoff, Annegret; Weil, Mirco; Meißner, Tobias; Kühnel, Dana | Zeitschriftenaufsatz |
| 2015 | Towards the deployment of acousto-ultrasonics-based SHM in industry
Schubert, Lars; Bach, Martin; Berger, Ulrich; Buethe, Inka; Fritzen, Claus-Peter; Jung, Henning; Lieske, Uwe; Raddatz, Florian | Konferenzbeitrag |
| 2015 | Transparente Spinellkeramiken und Verfahren zu ihrer Herstellung
Hutzler, Thomas; Krell, Andreas | Patent |
| 2015 | Tribology of HVOF- and HVAF-sprayed WC-10Co4Cr hardmetal coatings: A comparative assessment
Bolelli, Giovanni; Berger, Lutz-Michael; Börner, Tim; Koivuluoto, Heli; Lusvarghi, Luca; Lyphout, Christophe; Markocsan, Nicolaie; Matikainen, V.; Nylén, Per E.; Sassatelli, Paolo; Trache, Richard; Vuoristo, Petri | Zeitschriftenaufsatz |
| 2015 | Tribology of thermally sprayed coatings in the Al2O3-Cr2O3-TiO2 system
Berger, Lutz-Michael | Aufsatz in Buch |
| 2015 | Ultra-thin ZrO2/SrO/ZrO2 insulating stacks for future dynamic random access memory capacitor applications
Knebel, Steve; Pešić, Milan; Cho, Kyuho; Chang, Jaewan; Lim, Hanjin; Kolomiiets, Nadiia; Afanasyev, Valeri; Mühle, Uwe; Schröder, Uwe; Mikolajick, Thomas | Zeitschriftenaufsatz |
| 2015 | Untersuchung technischer Einflussgrößen auf die elektrische Leitfähigkeit von festphasen-gesintertem Siliciumcarbid
Lankau, Volkmar
: Michaelis, Alexander (Gutachter); Martin, Hans-Peter (Betreuer); Lippmann, Wolfgang (Zweitgutachter) | Dissertation |
| 2015 | Untersuchung zur Rolle von B2O3, Kohlenstoff und SiO2 auf die Verdichtung und Eigenschaften flüssigphasen-gesinterter B6O-Werkstoffe
Müller, Christin | Diplomarbeit |
| 2015 | Untersuchung zur zerstörungsfreien Detektion von Rissen an Rohrstrukturen mit geführten Wellen
Harms, Stefan
: Buske, Stefan (Betreuer); Weihnacht, Bianca (Betreuer) | Master Thesis |
| 2015 | Untersuchungen zum Hochtemperaturverhalten von Siliciumcarbid-Schaumkeramik für Brenneranwendungen
Füssel, Alexander | Dissertation |
| 2015 | Usage of the concept of the effectively shaped indenter for the determination of yield stress from Berkovich nano-indentation experiments
Clausner, André; Richter, Frank | Zeitschriftenaufsatz |
| 2015 | Verfahren und Anordnung zum Erfassen von optischen Brechzahlen oder deren Änderungen
Derenko, Susan; Härtling, Thomas | Patent |
| 2015 | Verfahren und Vorrichtung zur Detektion von Fremdkörpern oder anderen Streuzentren in optisch transparenten Behältern
Röder, Olaf; Fischer, Björn; Wolf, Christian | Patent |
| 2015 | Verfahren und Vorrichtung zur Verhaltenssteuerung von Systemen
Wolff, Matthias; Römer, Ronald; Tschöpe, Constanze; Hentschel, Dieter | Patent |
| 2015 | Verfahren zur Erstellung von Elementverteilungsbildern mit einem Transmissionselektronenmikroskop
Mühle, Uwe; Gluch, Jürgen; Zschech, Ehrenfried | Patent |
| 2015 | Verfahren zur Herstellung keramischer und/oder metallischer Bauteile
Scheithauer, Uwe; Schwarzer, Eric; Poitzsch, Claudia; Richter, Hans-Jürgen; Moritz, Tassilo | Patent |
| 2015 | Verfahren zur Verpackungsherstellungskontrolle und Verpackungsherstellungsmaschine
Härtling, Thomas; Röder, Olaf; Reitzig, Manuela | Patent |
| 2015 | Via hole conditioning in silicon heterojunction metal wrap through solar cells
Dirnstorfer, Ingo; Schilling, Niels; Körner, Stefan; Gierth, Paul; Waltinger, Andreas; Leszczynska, Barbara; Simon, Daniel K.; Gärtner, Jan; Jordan, Paul M.; Mikolajick, Thomas; Dani, Ines; Eberstein, Markus; Rebenklau, Lars; Krause, Jens | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2015 | A viscoplastic-fatigue-creep damage model for tin-based solder alloy
Metais, Benjamin; Kabakchiev, Alexander; Maniar, Youssef; Guyenot, Michael; Metasch, René; Röllig, Mike; Rettenmeier, Philipp; Buhl, Patrick; Weihe, Stefan | Konferenzbeitrag |
| 2015 | Vorrichtung und Verfahren zur Prüfung von Schichtinhomogenitäten einer Fläche
Wolf, Christian; Fischer, Björn; Lehmann, Andreas | Patent |
| 2015 | Wear of abrasive media and its effect on abrasive flow machining results
Bremerstein, Tina; Potthoff, Annegret; Michaelis, Alexander; Schmiedel, Christian; Uhlmann, Eckart; Blug, Bernhard; Amann, Tobias | Zeitschriftenaufsatz |
| 2015 | Wear properties of chromium carbide based HVOF and HVAF thermal spray coatings up to 800°C
Janka, Leo; Norpoth, Jonas; Rodriguez Ripoll, Manel; Katsich, Christian; Trache, Richard; Toma, Filofteia-Laura; Thiele, Sven; Berger, Lutz-Michael | Konferenzbeitrag |
| 2015 | Zukunftspotentiale von Hochleistungskeramiken
Voigtsberger, Bärbel; Rossner, Wolfgang; Joachim, Klemens; Lenk, Reinhard; Hartmann, Martin | Zeitschriftenaufsatz |
| 2014 | (Bio)hybrid materials based on optically active particles
Reitzig, Manuela; Härtling, Thomas; Opitz, Jörg | Konferenzbeitrag |
| 2014 | (Mikro-)elektrochemische Untersuchungen zur Schichtdicke und den dielektrischen Eigenschaften dünner anodischer Oxidfilme auf Titan und TiAlV6-4
Langklotz, Ulrike
: Michaelis, Alexander | Dissertation |
| 2014 | 0.92 Pb(Mg1/3Nb2/3)O3 - 0.08 PbTiO3 relaxor ferroelectrics modified with different dopants for electrocaloric cooling application
Molin, Christian; Keitel, Uwe; Neumeister, Peter; Gebhardt, Sylvia; Schönecker, Andreas | Konferenzbeitrag |
| 2014 | 3D technology as a holistic approach - quo vadis?
Wolf, M. Jürgen; Schneider, Peter; Schulz, Stefan; Zschech, Ehrenfried | Vortrag |
| 2014 | Acoustic devices for particle and cell manipulation and sensing
Qiu, Yongqiang; Wang, Han; Démoré, Christine; Hughes, David; Glynne-Jones, Peter; Gebhardt, Sylvia; Bolhovitins, Aleksandrs; Poltarjonoks, Romans; Weijer, Kees C.; Schönecker, Andreas; Hill, Martyn; Cochran, Sandy | Zeitschriftenaufsatz |
| 2014 | Acoustic emission analysis in the dynamic fatigue testing of fiber composite components
Weihnacht, Bianca; Schulze, Eberhard; Frankenstein, Bernd | Konferenzbeitrag |
| 2014 | Active functionality of piezoceramic modules integrated in aluminum high pressure die castings
Schwankl, M.; Rübner, M.; Flössel, M.; Gebhardt, S.; Michaelis, A.; Singer, R.F.; Koerner, C. | Zeitschriftenaufsatz |
| 2014 | Advanced 3D packaging of chips and materials integrity: Stress-induced effects and mechanical properties of new ultra low-k dielectrics for on-chip interconnect stacks
Sander, Christoph; Gall, Martin; Yeap, Kong Boon; Zschech, Ehrenfried | Konferenzbeitrag |
| 2014 | Advanced concepts for TDDB reliability in conjunction with 3D stress
Gall, Martin; Yeap, Kong Boon; Zschech, Ehrenfried | Konferenzbeitrag |
| 2014 | Advanced metallization concepts and impact on reliability
Hauschildt, Meike; Hintze, Bernd; Gall, Martin; Koschinsky, Frank; Preuße, Axel; Bolom, Tibor; Nopper, Markus; Beyer, Armand; Aubel, Oliver; Talut, Georg; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2014 | Advanced methods for mechanical and structural characterization of nanoscale materials for 3D IC integration
Sander, Christoph; Standke, Yvonne; Niese, Sven; Rosenkranz, Rüdiger; Clausner, André; Gall, Martin; Zschech, Ehrenfried | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2014 | AdvanCer Newsletter. Ausgabe 2014/1
: Freund, S.; Gaal, A. | Zeitschriftenheft |
| 2014 | AdvanCer Newsletter. Ausgabe 2014/2
Freund, Susanne; Gaal, Andrea | Zeitschriftenheft |
| 2014 | Advances in Barkhausen noise analysis
Meyendorf, Norbert; Hillmann, Susanne; Cikalova, Ulana; Schreiber, Jürgen | Konferenzbeitrag |
| 2014 | Advances in solid oxide fuel cells IX. Preface
Bansal, Narottam P.; Kusnezoff, Mihails | Konferenzbeitrag |
| 2014 | Aerosol jet printing of two component thick film resistors on LTCC
Swiecinski, K.; Ihle, Martin; Jurk, Robert; Dietzen, E.; Partsch, Uwe; Eberstein, Markus | Konferenzbeitrag |
| 2014 | Aging behavior of reactive air brazed seals for SOFC
Pönicke, Andreas; Schilm, Jochen; Kusnezoff, Mihails; Michaelis, Alexander | Konferenzbeitrag |
| 2014 | Aktuelle Trends in der Keramik
Stelter, Michael; Michaelis, Alexander | Konferenzbeitrag |
| 2014 | All-solid-state pH-Sensor in keramischer Multilayertechnologie
Feller, Claudia; Grießmann, Horst; Eberstein, Markus | Konferenzbeitrag |
| 2014 | Auswertevorrichtung für ein System zur Objekterfassung
Barth, Martin | Patent |
| 2014 | Auto-calibration principles for two-dimensional residual stress measurements by Barkhausen noise technique
Cikalova, Ulana; Schreiber, Jürgen; Hillmann, Susanne; Meyendorf, Norbert | Konferenzbeitrag |
| 2014 | Beitrag zur quantitativen Charakterisierung keramischer Granulate, Grünkörper und Werkstoffe im angesinterten Zustand
Höhn, Sören
: Michaelis, Alexander | Dissertation |
| 2014 | Biotechnological hydrogen production by photosynthesis
Weber, Jost; Krujatz, Felix; Hilpmann, Gerd; Grützner, Sara; Herrmann, Jana; Thierfelder, Simone; Bienert, Georg; Illing, Rico; Helbig, Karsten; Hurtado, Antonio; Gianaurelio, Cuniberti; Mertig, Michael; Lange, Rüdiger; Günther, Edeltraud; Opitz, Jörg; Lippmann, Wolfgang; Bley, Thomas; Haufe, Nora | Zeitschriftenaufsatz |
| 2014 | Chemical degradation of screen-printed thick films on LTCC
Junker, Nils; Rabbow, Thomas; Schneider, Michael; Schilm, Jochen; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2014 | Co-firing technology for the preparation of asymmetric oxygen transporting membranes based on BSCF and Zr-doped BSCF
Pippardt, Ute; Böer, Jürgen; Kiesel, Lutz; Kircheisen, Robert; Kriegel, Ralf; Voigt, Ingolf | Zeitschriftenaufsatz |
| 2014 | Coatings
Kurzydlowski, Krzysztof; Boczkowska, Anna; Kozera, Rafał; Salacinska, Anna; Bielinski, Jerzy; Endler, Ingolf; Abidin, Alfaferi Zainal; Höhn, Mandy; Krug, Mario | Aufsatz in Buch |
| 2014 | Coatings by laser cladding
Nowotny, Steffen; Berger, Lutz-Michael; Spatzier, Jörg | Aufsatz in Buch |
| 2014 | Coatings by thermal spray
Berger, Lutz-Michael | Aufsatz in Buch |
| 2014 | Combination of pulse magnetron sputtering and atomic layer deposition for very low water vapor and oxygen transmission rates using cheap standard plastic substrates
Krug, Mario; Barth, Stephan; Endler, Ingolf; Glöß, Daniel; Fahlteich, John; Boeffel, Christine; Frach, Peter | Konferenzbeitrag |
| 2014 | Comments on "An extended hardness limit in bulk nanoceramics" by J.A. Wollmershauser, B.N. Feigelson, E.P. Gorzkowski, C.T. Ellis, R. Goswami, S.B. Qadri, J.G. Tischler, F.J. Kub, R.K. Everett, Acta Materialia 69 (2014) 9–16
Krell, Andreas | Zeitschriftenaufsatz |
| 2014 | A compact differential refractive index sensor based on localized surface plasmons
Derenko, Susan; Härtling, Thomas; Unglaube, Gregor; Eng, Lukas M.; Opitz, Jörg | Zeitschriftenaufsatz |
| 2014 | Comparative study of reactive and non-reactive sintering route for producing B6O-TiB2 materials
Johnson, O.T.; Sigalas, I.; Herrmann, M. | Zeitschriftenaufsatz |
| 2014 | Comparative study of the corrosion resistance of thermally sprayed ceramic coatings and their bulk ceramic counterparts
Herrmann, M.; Toma, F.-L.; Berger, L.-M.; Kaiser, G.; Stahr, C.C. | Zeitschriftenaufsatz |
| 2014 | Comparison between electromagnetic and electrical stimulation on human osteoblasts in vitro
Hiemer, B.; Jonitz-Heincke, A.; Su, Y.; Pasold, J.; Brand, M.; Lausch, H.; Hansmann, D.; Bader, R. | Konferenzbeitrag, Zeitschriftenaufsatz |
| 2014 | Comparison of thermo-mechanical characteristics of non-doped and 3 mol% B-site Zr-doped Ba0.5Sr0.5Co0.8Fe0.2O3-sigma
Pecanac, G.; Kiesel, L.; Kriegel, R.; Malzbender, J. | Zeitschriftenaufsatz |
| 2014 | Correction of eddy current measurements to obtain accordance with simulation results
Joneit, D.; Nadler, M.; Heuer, H. | Zeitschriftenaufsatz |
| 2014 | Correlations between microstructure and dielectric properties of hexagonal boron nitride
Steinborn, Clemens; Herrmann, Mathias; Keitel, Uwe; Schönecker, Andreas; Eichler, Jens | Zeitschriftenaufsatz |
| 2014 | Corrosion behaviour of silicon carbide-diamond composite materials in aqueous solutions
Herrmann, Mathias; Kluge, Eric; Rödel, Conny; McKie, Amanda; Staden, Frances van | Zeitschriftenaufsatz |
| 2014 | Corrosion of ceramic materials
Herrmann, Mathias; Klemm, Hagen | Aufsatz in Buch |
| 2014 | D2 enertrode: Production technologies and component integration of nanostructured carbon electrodes for energy technology - functionalized carbon materials for efficient electrical energy supply
Dörfler, Susanne; Pinkert, Katja; Weiser, Mathias; Wabnitz, Christian; Goldberg, Adrian; Ferse, Bernhard; Giebeler, Lars; Althues, Holger; Schneider, Michael; Eckert, Jürgen; Michaelis, Alexander; Beyer, Eckhard; Kaskel, Stefan | Zeitschriftenaufsatz |
| 2014 | Debris of potassium-magnesium silicate glass generated by femtosecond laser-induced ablation in air
Grehn, M.; Seuthe, T.; Reinhardt, F.; Höfner, M.; Griga, N.; Eberstein, M.; Bonse, J. | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2014 | Defect detection in carbon fiber non-crimp fabrics and CRFP with high-frequency eddy current technique
Bardl, Georg; Nocke, Andreas; Cherif, Chokri; Kupke, Richard; Klein, Marcus; Heuer, Henning | Zeitschriftenaufsatz |
| 2014 | Defect strategies for an improved optical quality of transparent ceramics
Krell, Andreas; Hutzler, Thomas; Klimke, Jens | Zeitschriftenaufsatz |
| 2014 | Demands and economic aspects of thermal spraying with suspensions - an overview
Toma, Filofteia-Laura; Berger, Lutz-Michael; Potthoff, Annegret; Langner, Stefan | Konferenzbeitrag |
| 2014 | Description of the thermo-mechanical properties of a Sn-based solder alloy by a unified viscoplastic material model for finite element calculations
Kabakchiev, Alexander; Metais, B.; Ratchev, Roumen; Guyenot, Michael; Buhl, P.; Hossfeld, M.; Metasch, René; Röllig, Mike | Konferenzbeitrag |
| 2014 | Design, technology, and application of integrated piezoresistive scanning thermal microscopy (SThM) microcantilever
Janus, P.; Grabiec, P.; Sierakowski, A.; Gotszalk, T.; Rudek, M.; Kopiec, D.; Majstrzyk, W.; Boetsch, G.; Koehler, B. | Konferenzbeitrag |
| 2014 | Determination of residence time distributions in different high pressure gasification processes by radioactive tracers
Ortwein, A.; Zeuner, A.; Jentsch, T.; Zeißler, R.; Seifert, P.; Schlichting, H.; Meyer, B. | Zeitschriftenaufsatz |
| 2014 | Determination of yield stress from nano-indentation experiments
Clausner, André; Richter, Frank | Zeitschriftenaufsatz |
| 2014 | Detonation nanodiamonds biofunctionalization and immobilization to titanium alloy surfaces as first steps towards medical application
Goncalves, J.P.L.; Shaikh, A.Q.; Reitzig, M.; Kovalenko, D.A.; Michael, J.; Beutner, R.; Cuniberti, G.; Scharnweber, D.; Opitz, J. | Zeitschriftenaufsatz |
| 2014 | Development and testing of sealing glasses for SOFCs based on CFY-interconnects
Rost, Axel; Schilm, Jochen; Suffner, J.; Kusnezoff, Mihails; Michaelis, Alexander | Konferenzbeitrag |
| 2014 | Development of a robust, ceramic MEMS-package for hermetically sealed and highly shock-resistant SMD-devices
Goldberg, Adrian; Ihle, Martin; Ziesche, S.; Külls, Robert | Konferenzbeitrag |
| 2014 | Development of a SOFC/battery-hybrid system for distributed power generation in India
Pfeifer, Thomas; Barthel, Markus; Dosch, Christian; Megel, Stefan; Scholz, Matthias; Wunderlich, Christian | Konferenzbeitrag |
| 2014 | Development of laser-based joining technology for the fabrication of ceramic thermoelectric modules
Börner, Floriana-Dana; Schreier, Max; Feng, Bing; Lippmann, Wolfgang; Martin, Hans-Peter; Michaelis, Alexander; Hurtado, Antonio | Zeitschriftenaufsatz |
| 2014 | Development of planar and cylindrical refractories with graded microstructure
Scheithauer, Uwe; Slawik, Tim; Haderk, Kristin; Moritz, Tassilo; Michaelis, Alexander | Konferenzbeitrag |
| 2014 | Development of silicon heterojunction metal wrap through solar cells
Dirnstorfer, Ingo; Schilling, Niels; Körner, Stefan; Gierth, Paul; Sontag, Detlef; Jordan, Paul M.; Simon, Daniel K.; Fengler, Franz P.G.; Mikolajick, Thomas; Linaschke, Dorit; Dani, Ines; Marcinkowski, Manja; Eberstein, Markus; Rebenklau, Lars; Partsch, Uwe | Konferenzbeitrag |
| 2014 | Development of thermally sprayed Ca2Fe2O5 coatings for thermoelectrical applications
Barbosa, Maria M.; Puschmann, Roberto; Thiele, Sven; Toma, Filofteia-Laura; Martin, Hans-Peter; Berger, Lutz-Michael; Leyens, Christoph; Beyer, Eckhard; Laag, N.J. van der | Konferenzbeitrag |
| 2014 | Dispersion of nanomaterials used in toxicological studies: A comparison of sonication approaches demonstrated on TiO2 P25
Meißner, Tobias; Oelschlägel, Kathrin; Potthoff, Annegret | Zeitschriftenaufsatz |
| 2014 | Editorial. Case Studies in Nondestructive Testing and Evaluation
Köhler, B. | Zeitschriftenaufsatz |
| 2014 | The effect of bath aging on the microstructure of anodic oxide layers on AA1050
Schneider, Michael; Kremmer, Kerstin | Zeitschriftenaufsatz |
| 2014 | Effect of mechanical constraints in thin ceramic LTCC/PZT multilayers on the polarization behavior of the embedded PZT
Neumeister, Peter; Eßlinger, Sophia; Gebhardt, Sylvia; Schönecker, Andreas; Flössel, Markus | Zeitschriftenaufsatz |
| 2014 | Effect of process parameters on structure and piezoelectric properties of AlN and AlXSc1-XN films deposited by pulsed magnetron sputtering
Barth, Stephan; Bartzsch, Hagen; Glöß, Daniel; Frach, Peter; Zywitzki, Olaf; Herzog, Thomas; Walter, Susan; Heuer, Henning | Konferenzbeitrag |
| 2014 | Effect of solvent exchange on the stability of sterically functionalized magnetite nanoparticles in poly(methyl methacrylate) solutions and resulting spray dried composites
Bremerstein, Tina; Rudolph, Martin; Peuker, Urs Alexander | Zeitschriftenaufsatz |
| 2014 | The effect of solvents on the surface quality during ECM of WC
Schubert, Nora; Simunkova, Lenka; Schneider, Michael; Michaelis, Alexander | Konferenzbeitrag |
| 2014 | Effect of waveform of ac voltage on the morphology and crystallinity of electrochemically assembled platinum nanowires
Nerowski, Alexander; Pötschke, Markus; Wiesenhütter, Ulrich; Nicolai, Jürgen; Cikalova, Ulana; Dianat, Arezoo; Erbe, Artur; Opitz, Jörg; Bobeth, Manfred; Baraban, Larysa; Cuniberti, Gianaurelio | Zeitschriftenaufsatz |
| 2014 | Effective poling of hard PZT ceramics for high-power ultrasound applications
Eßlinger, Sophia; Neumeister, Peter; Schönecker, Andreas | Konferenzbeitrag |
| 2014 | Einfluss von Beschichtungspulver und HVOF-Spritzprozess auf die Eigenschaften von Cr3C2NiCr-Schichten
Trache, Richard; Shakhverdova, Irina; Puschmann, Roberto; Toma, Filofteia-Laura; Berger, Lutz-Michael; Thiele, Sven | Konferenzbeitrag |
| 2014 | Electrochemical corrosion of silicon carbide ceramics in H2SO4
Herrmann, M.; Sempf, K.; Schneider, M.; Sydow, U.; Kremmer, K.; Michaelis, A. | Zeitschriftenaufsatz |
| 2014 | Electrochemical corrosion of silicon carbide ceramics in sodium hydroxide
Herrmann, M.; Sempf, K.; Wendrock, H; Schneider, M.; Kremmer, K.; Michaelis, A. | Zeitschriftenaufsatz |
| 2014 | Electrochemical incineration of C-14-containing liquid wastes - first results and outlook
Friedrich, Hans-Jürgen; Zschornack, Daniel; Knappik, Reinhard; Müller, W. | Zeitschriftenaufsatz |
| 2014 | Electrochemical machining of cemented carbides
Schubert, Nora; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2014 | Electrochemical machining of hard metals - WC/Co as example
Lohrengel, M.M.; Rataj, K.P.; Schubert, N.; Schneider, Michael; Höhn, Sören; Michaelis, Alexander; Hackert-Oschätzchen, M.; Martin, A.; Schubert, A. | Zeitschriftenaufsatz |
| 2014 | Electromigration void nucleation and growth analysis using large-scale early failure statistics
Hauschildt, Meike; Gall, Martin; Hennesthal, Christian; Talut, Georg; Aubel, Oliver; Yeap, Kong Boon; Zschech, Ehrenfried | Konferenzbeitrag |
| 2014 | Empirical BEOL-TDDB evaluation based on I(t)-trace analysis
Aubel, Oliver; Beyer, Armand; Talut, Georg; Gall, Martin | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2014 | The eneramic® power generator - a reliable fuel cell battery hybrid system for off-grid power supply
Pönicke, Andreas; Reuber, Sebastian; Wunderlich, Christian; Michaelis, Alexander | Vortrag |
| 2014 | eneramic© – The mobile SOFC power generator well on its way to commercialization
Reuber, Sebastian; Pönicke, Andreas; Wunderlich, Christian; Michaelis, Alexander | Konferenzbeitrag |
| 2014 | Evaluation of long time stability of solder joints on Ag thick film conductors on Al2O3
Gierth, Paul; Zieschank, Michael; Rebenklau, Lars | Konferenzbeitrag |
| 2014 | Evaluation of low energy electron beam dose application by means of a portable optical device
Reitzig, Manuela; Winkler, Martin; Härtling, Thomas; Röder, Olaf; Opitz, Jörg | Zeitschriftenaufsatz |
| 2014 | Evaluation of TFR-characteristics in a wide temperature range
Partsch, Uwe; Lenz, Christian; Wenzel, Marco; Eberstein, Markus | Konferenzbeitrag |
| 2014 | Ex-service analysis of membrane tubes after the operation in a demonstrator unit
Rutkowski, B.; Kriegel, Ralf; Malzbender, Jürgen | Zeitschriftenaufsatz |
| 2014 | Examination of the porosity in reactive air brazed joints by ultrasonic testing
Tillmann, Wolfgang; Sievers, Norman; Pfeiffer, Jan; Wojarski, Lukas; Zielke, Reiner; Pönicke, Andreas; Schilm, Jochen | Zeitschriftenaufsatz |
| 2014 | Experimental investigation of the visco-plastic mechanical properties of a Sn-based solder alloy for material modelling in Finite Element calculations of automotive electronics
Metasch, René; Röllig, Mike; Kabakchiev, Alexander; Metais, B.; Ratchev, Roumen; Meier, Karsten; Wolter, Klaus-Jürgen | Konferenzbeitrag |
| 2014 | Experimentelle Methode zur Bestimmung der Stromdichteverteilung in porösen Interkalationselektroden
Heubner, Christian; Langklotz, Ulrike; Michaelis, Alexander; Schneider, Michael | Konferenzbeitrag |
| 2014 | Fabrication of customizable wedged multilayer Laue lenses by adding a stress layer
Niese, Sven; Krüger, Peter; Kubec, Adam; Laas, Roman; Gawlitza, Peter; Melzer, Kathleen; Braun, Stefan; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2014 | Fabrication of short fiber reinforced SiCN by injection molding of preceramic polymers
Müller-Köhn, Axel; Janik, J.; Neubrand, Achim; Klemm, Hagen; Moritz, Tassilo; Michaelis, Alexander | Konferenzbeitrag |
| 2014 | Fallstudie über spezielle Prüfaufgaben für Luftfahrt-Komponenten aus Titanlegierungen
Hillmann, Susanne; Schiller-Bechert, David Maximilian; Bor, Zsolt; Meyendorf, Robert; Eylon, Daniel; Meyendorf, Norbert | Konferenzbeitrag |
| 2014 | Fatigue behaviour of hot pressed austenitic TWIP steel and TWIP steel/Mg-PSZ composite materials
Glage, A.; Weigelt, C.; Räthel, J.; Biermann, H. | Zeitschriftenaufsatz |
| 2014 | Femtosecond-laser induced ablation of silicate glasses and the intrinsic dissociation energy
Grehn, Moritz; Seuthe, Thomas; Höfner, Michael; Griga, Nils; Theiss, Christoph; Mermillod-Blondin, Alexandre; Eberstein, Markus; Eichler, Hans Joachim; Bonse, Jörn | Zeitschriftenaufsatz |
| 2014 | Fiber based structured materials for catalytic applications
Reichelt, Erik; Heddrich, Marc Philipp; Jahn, Matthias; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2014 | Fiber polarization mode excitation applied to confocal microscopy
Zeh, Christoph; Härtling, Thomas | Konferenzbeitrag |
| 2014 | Field-assisted sintering technology/spark plasma sintering: Mechanisms, materials, and technology developments
Guillon, Olivier; Gonzalez-Julian, Jesus; Dargatz, Benjamin; Kessel, Tobias; Schierning, Gabi; Räthel, Jan; Herrmann, Mathias | Zeitschriftenaufsatz |
| 2014 | Filter-based interrogation of fiber bragg grating sensors
Wuchrer, Roland; Lautenschläger, Harald; Metasch, René; Röllig, Mike; Fleischer, Thomas; Härtling, Thomas | Konferenzbeitrag |
| 2014 | Folate functionalized nanodiamond particles, method for its preparation and their use
Lapina, Viktoriya; Opitz, Jörg; Borobey, Alexander; Pavich, Tatjana; Schreiber, Jürgen | Patent |
| 2014 | Fractal dimension of time-resolved autofluorescence discriminates tumour from healthy tissues in the oral cavity
Klatt, J.; Gerich, C.E.; Gröbe, A.; Opitz, J.; Schreiber, J.; Hanken, H.; Salomon, G.; Heiland, M.; Kluwe, L.; Blessmann, M. | Zeitschriftenaufsatz |
| 2014 | Fraunhofer cluster 3D integration
Wolf, M. Jürgen; Schulz, Stefan; Schneider, Peter; Zschech, Ehrenfried | Konferenzbeitrag |
| 2014 | Fraunhofer cluster 3D integration - key to a holistic technology and service approach
Wolf, Jürgen M.; Schulz, Stefan; Schneider, Peter; Zschech, Ehrenfried | Konferenzbeitrag |
| 2014 | Fraunhofer-Institut für Keramische Technologien und Systeme. Jahresbericht 2013/2014
| Jahresbericht |
| 2014 | Frontseitenkontaktierung polykristalliner Siliziumsolarzellen mittels bleifreier ZnO-haltiger Gläser in Silberpasten
Peschel, Maik
: Michaelis, Alexander | Dissertation |
| 2014 | Fügetechnologien für keramikbasierte thermoelektrische Module
Pönicke, Andreas; Rost, Axel; Schilm, Jochen; Martin, Hans-Peter; Kusnezoff, Mihails | Vortrag |
| 2014 | Full-field X-ray microscopy with crossed partial multilayer Laue lenses
Niese, Sven; Krüger, Peter; Kubec, Adam; Braun, Stefan; Patommel, Jens; Schroer, Christian G.; Leson, Andreas; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2014 | Funktionalisierung von Keramikoberflächen durch thermisch gespritzte Schichten
Toma, Filofteia-Laura; Berger, Lutz-Michael; Kuntze, Thomas; Scheitz, Stefan; Thiele, Sven | Zeitschriftenaufsatz |
| 2014 | Galvanic corrosion of metal/ceramic coupling
Schneider, M.; Kremmer, K.; Lämmel, C.; Sempf, K.; Herrmann, M. | Zeitschriftenaufsatz |
| 2014 | GigaSonic - Untersuchungen an hochfrequenten Dünnschichtschwingern für zukünftige Phased-Array-Sensoren
Herzog, Thomas; Walter, Susan; Heuer, Henning | Zeitschriftenaufsatz |
| 2014 | GigaSonic - Untersuchungen an hochfrequenten Dünnschichtschwingern für zukünftige Phased-Array-Sensoren
Herzog, Thomas; Walter, Susan; Heuer, Henning | Zeitschriftenaufsatz |
| 2014 | Grain growth during sintering of tungsten carbide ceramics
Poetschke, Johannes; Richter, Volkmar; Gestrich, Tim; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2014 | Herstellung und Charakterisierung von kompakten bindemittelfreien Zeolithformkörpern mit Faujasit- und Linde Typ A-Struktur
Schumann, Kristin; Unger, Baldur; Brandt, Alfons; Fischer, Gundula; Richter, Hannes; Jänchen, Jochen | Zeitschriftenaufsatz |
| 2014 | High-temperature corrosion of aluminium nitride ceramics by coal ashes
Himpel, G.; Herrmann, M.; Höhn, S.; Klinger, M. | Zeitschriftenaufsatz |
| 2014 | High-temperature corrosion of silicon carbide ceramics by coal ashes
Herrmann, M.; Standke, G.; Höhn, S.; Himpel, G.; Gestrich, T. | Zeitschriftenaufsatz |
| 2014 | High-temperature stability and saturation magnetization of superparamagnetic nickel nanoparticles in microporous polysilazane-derived ceramics and their gas permeation properties
Seifollahi Bazarjani, Mahdi; Müller, Mathis; Kleebe, Hans Joachim; Jüttke, Yvonne; Voigt, Ingolf; Baghaie Yazdi, Mehrdad; Alff, Lambert; Riedel, Ralf; Gurlo, Aleksander | Zeitschriftenaufsatz |
| 2014 | Identification of process parameters for efficient poling of PZT ceramics for mass production
Nicolai, Michael; Eßlinger, Sophia; Schönecker, Andreas | Zeitschriftenaufsatz |
| 2014 | Implications of the stability behavior of zinc oxide nanoparticles for toxicological studies
Meißner, Tobias; Oelschlägel, Kathrin; Potthoff, Annegret | Zeitschriftenaufsatz |
| 2014 | Improving the rate capability of high voltage Lithium-ion battery cathode material LiNi0.5Mn1.5O4 by ruthenium doping
Kiziltaş-Yavuz, Nilüfer; Bhaskar, Aiswarya; Dixon, Ditty; Yavuz, Murat; Nikolowski, Kristian; Lu, Li; Eichel, Rüdiger; Ehrenberg, Helmut | Zeitschriftenaufsatz |
| 2014 | In situ study on low-k interconnect time-dependent-dielectric-breakdown mechanisms
Yeap, Kong Boon; Gall, Martin; Liao, Zhongquan; Sander, Christoph; Mühle, Uwe; Justison, Patrick; Aubel, Oliver; Hauschildt, Meike; Beyer, Armand; Vogel, Norman; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2014 | In-situ investigations of individual nanowires within a FIB/SEM system
Löffler, Markus; Banerjee, Sayanti; Trommer, Jens; Heinzig, André; Weber, Walter; Zschech, Ehrenfried | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2014 | In-situ observations of glass frit related effects during the front side paste contact formation
Eberstein, Markus; Schmidt, Ulrike; Körner, Stefan; Reinhardt, Kathrin; Jurk, Robert; Partsch, Uwe | Konferenzbeitrag |
| 2014 | Influence of Cr3C2-NiCr feedstock powder characteristics on the deposition efficiency, coating microstructures and abrasion wear resistance
Berger, Lutz-Michael; Thiele, Sven; Börner, Tim; Janka, L.C.; Rodriguez Ripoll, M. | Konferenzbeitrag |
| 2014 | Influence of oxygen micro atmosphere during contact formation
Körner, Stefan; Reinhardt, Kathrin; Partsch, Uwe; Eberstein, Markus | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2014 | Influence of sample thickness and concentration of Ce dopant on the optical properties of YAG:Ce ceramic phosphors for white LEDs
Wätzig, Katja; Kunzer, Michael; Kinski, Isabel | Zeitschriftenaufsatz |
| 2014 | Influence of small additions of MeC on properties of binderless tungsten carbide
Poetschke, J.; Richter, V.; Michaelis, A. | Konferenzbeitrag |
| 2014 | Influence of tantalum on the microstructure and properties of Ti(C,N)-Ni cermets
Naidoo, M.; Johnson, O.; Sigalas, I.; Herrmann, M. | Zeitschriftenaufsatz |
| 2014 | Innovationen in der Membranfiltration zur Industrieabwasserreinigung
Voigt, Ingolf | Konferenzbeitrag |
| 2014 | An innovative contact heating method in the thermoforming process
Claus, Ronald; Stein, Marcus; Bach, Sascha; Majschak, Jens Peter; Partsch, Uwe; Grießmann, Horst | Konferenzbeitrag |
| 2014 | Innovative kiln furniture, their influence on the temperature distribution within the kiln, and a new production technology
Scheithauer, Uwe; Dannowski, Marcel; Schwarzer, Eric; Slawik, Tim | Zeitschriftenaufsatz |
| 2014 | Integration of Ni-Cu-Zn and Hexagonal Ferrites into LTCC Modules: Cofiring Strategies and Magnetic Properties
Töpfer, J.; Hesse, J.; Bierlich, S.; Barth, S.; Capraro, B.; Rabe, T.; Nagib-Zadeh, H.; Bartsch, H. | Zeitschriftenaufsatz |
| 2014 | Investigation of HVOF-sprayed (Ti,Mo)(C,N)-Ni hardmetal coatings for static friction applications
Berger, Lutz-Michael; Shakhverdova, Irina; Puschmann, Roberto; Gräfensteiner, D.M.; Leidich, E.; Schiefer, S.; Gerlach, M. | Konferenzbeitrag |
| 2014 | Investigations on mobility of carbon colloid supported nanoscale zero-valent iron (nZVI) in a column experiment and a laboratory 2D-aquifer test system
Busch, Jan; Meißner, Tobias; Potthoff, Annegret; Oswald, Sascha | Zeitschriftenaufsatz |
| 2014 | Kathoden-Elektrolyt-Anodeneinheit von Hochtemperatur-Brennstoffzellen
Dietzen, Egle; Trofimenko, Nikolai; Kusnezoff, Mihails; Sauchuk, Viktar | Patent |
| 2014 | Laser-supported joining of SiC-fiber/SiCN ceramic matrix composites fabricated by precursor infiltration
Herrmann, Marion; Schönfeld, Katrin; Klemm, Hagen; Lippmann, Wolfgang; Hurtado, Antonio; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2014 | Lebensdauer von SMD-Lotkontakten unter kombinierter Vibrations- und Temperaturbelastung
Meier, Karsten; Lautenschläger, Georg; Wolter, Klaus-Jürgen; Röllig, Mike; Schießl, Andreas | Zeitschriftenaufsatz |
| 2014 | Lebensdauerbestimmung für Lotkontakte von SMD-Bauelementen unter Vibrations- und Temperaturbelastung
Meier, Karsten; Lautenschläger, Georg; Röllig, Mike; Schießl, Andreas; Wolter, Klaus-Jürgen | Konferenzbeitrag |
| 2014 | Li-ion conducting solid electrolytes
Rost, Axel; Schilm, Jochen; Kusnezoff, Mihails; Michaelis, Alexander | Konferenzbeitrag |
| 2014 | LIGNO-BIOGAS: Biogasgewinnung aus lignozellulosehaltigen Reststoffen
Wufka, André | Konferenzbeitrag |
| 2014 | Localization of defects in pipes using guided waves and synthetic aperture focussing technique (saft)
Gaul, Tobias; Schubert, Lars; Weihnacht, Bianca; Frankenstein, Bernd | Konferenzbeitrag |
| 2014 | Managing stress-induced effects on performance and reliability of 3D IC stacks
Zschech, Ehrenfried | Abstract |
| 2014 | Manchmal ist kaputt besser - Substratvorbehandlung
Schwarz, Björn | Zeitschriftenaufsatz |
| 2014 | Manufacture and testing of thermoelectric modules consisting of BxC and TiOx elements
Feng, Bing; Martin, Hans-Peter; Börner, Floriana-Dana; Lippmann, Wolfgang; Schreier, Max; Vogel, Karin; Lenk, Andreas; Veremchuk, Igor; Dannowski, Marcel; Richter, Christin; Pfeiffer, Peter; Zikoridse, Gennadi; Lichte, Hannes; Grin, Juri; Hurtado, Antonio; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2014 | Manufacturing of two-colored co-sintered zirconia components by inmold-labelling and 2C-injection molding
Mannschatz, Anne; Härtel, Anja; Müller-Köhn, Axel; Moritz, Tassilo; Michaelis, Alexander; Wilde, Mathias | Zeitschriftenaufsatz |
| 2014 | Manufacturing processes for TiOx-based thermoelectric modules: From suboxide synthesis to module testing
Conze, S.; Poenicke, A.; Martin, H.-P.; Rost, A.; Kinski, I.; Schilm, J.; Michaelis, A. | Zeitschriftenaufsatz |
| 2014 | Materialentwicklung und verfahrenstechnische Erprobung eines energie- und rohstoffeffizienten Entschwefelungssystems für Biogas
Lincke, Marc; Poss, René; Tillmann, Andreas; Klöden, Burghardt; Gläser, Stefan; Faßauer, Burkhardt | Zeitschriftenaufsatz |
| 2014 | Measurement of retention functions with hysteresis using ground-penetrating radar
Weihnacht, B.; Boerner, F. | Zeitschriftenaufsatz |
| 2014 | Mechanical properties of hot-pressed boron suboxide with chromium boride additive
Ogunmuyiwa, Enoch N.; Johnson, Oluwagbenga T.; Sigalas, Iakovos; Herrmann, Mathias; Afolabi, Ayo Samuel | Konferenzbeitrag |
| 2014 | Mechanical properties of porous MgO substrates for membrane applications
Lipińska-Chwałek, Marta; Kiesel, Lutz; Malzbender, Jürgen | Zeitschriftenaufsatz |
| 2014 | Metal nano-inks: From synthesis to application
Mosch, S.; Fritsch, M.; Trofimenko, N.; Jurk, R. | Zeitschriftenaufsatz |
| 2014 | Metal–ceramic layered materials and composites manufactured using powder techniques
Slawik, Tim; Bergner, Anne; Puschmann, Roberto; Franke, Peter; Räthel, Jan; Behnisch, Thomas; Scholl, Roland; Berger, Lutz-Michael; Moritz, Tassilo; Zelm, Roland; Gude, Maik; Michaelis, Alexander; Beyer, Eckhard; Leyens, Christoph; Großmann, Harald; Kieback, Bernd | Zeitschriftenaufsatz |
| 2014 | Microscopic in-operando thermography at the cross section of a single lithium ion battery stack
Heubner, Christian; Lämmel, Christoph; Junker, Nils; Schneider, Michael; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2014 | A modeling platform for ultrasonic immersion testing of polycrystalline materials with flaws
Schubert, Frank | Konferenzbeitrag |
| 2014 | Modification of internal granule structure via spray-drying parameters
Eckhard, Susanna; Fries, Manfred | Konferenzbeitrag |
| 2014 | Modification of internal granule structure via spray-drying parameters
Eckhard, Susanna; Fries, Manfred | Konferenzbeitrag |
| 2014 | Modification of the mechanical granule properties via internal structure
Eckhard, Susanna; Fries, Manfred; Teipel, Ulrich; Antonyuk, Sergiy; Heinrich, Stefan | Zeitschriftenaufsatz |
| 2014 | Modified Sinter Unit (MSU) for sintering of metal and ceramic powder compacts
Scholl, R.; Slawik, T.; Moritz, T.; Michaelis, A. | Konferenzbeitrag |
| 2014 | Monolithic micro-positioning stage on piezo thick film technology
Bramlage, Bernhard; Ernst, Dörthe; Gebhardt, Sylvia | Konferenzbeitrag |
| 2014 | Multi-scale simulation flow and multi-scale materials characterization for stress management in 3D through-silicon-via integration technologies - effect of stress on 3D IC interconnect reliability
Sukharev, Valeriy; Zschech, Ehrenfried | Konferenzbeitrag |
| 2014 | Multi-scale X-ray tomography for process and quality control in 3D TSV packaging
Zschech, Ehrenfried; Niese, Sven; Löffler, Markus; Wolf, M. Jürgen | Konferenzbeitrag |
| 2014 | Nano-modified flexible multi-electrode array with an integrated flexible CMOS-chip for medical and biological applications
Winkin, Nadine; Gierth, Uta; Mokwa, W.; Schneider, Michael | Aufsatz in Buch |
| 2014 | Neues und verbessertes Verfahren zur Prüfung von Rohrrundschweißnähten
Hillmann, Susanne; Schiller-Bechert, David Maximilian; Uhlemann, Frank | Zeitschriftenaufsatz |
| 2014 | A new Barkhausen noise technique for applications at miniaturized geometries
Hillmann, Susanne; Meyendorf, Norbert | Konferenzbeitrag |
| 2014 | New developments of FAST/SPS tool materials
Räthel, Jan; Hennicke, Jürgen; Dyatlova, Yanina; Herrmann, Mathias; Rumyantsev, Vladimir | Konferenzbeitrag |
| 2014 | A new in situ microscopy approach to study the degradation and failure mechanisms of time-dependent dielectric breakdown: Set-up and opportunities
Liao, Zhongquan; Gall, Martin; Yeap, Kong Boon; Sander, Christoph; Aubel, Oliver; Mühle, Uwe; Gluch, Jürgen; Niese, Sven; Standke, Yvonne; Rosenkranz, Rüdiger; Löffler, Markus; Vogel, Norman; Beyer, Armand; Engelmann, Hans Jürgen; Guttmann, Peter; Schneider, Gerhard; Zschech, Ehrenfried | Zeitschriftenaufsatz |
| 2014 | Non-destructive flaw detection in in-situ carbon fibre reinforced composites using eddy-current
Heuer, H.; Schulze, M.; Heere, R. | Abstract |
| 2014 | Novel generation of kiln furniture
Scheithauer, Uwe; Freytag, Christian; Haderk, Kristin; Moritz, Tassilo; Zins, Michael; Michaelis, Alexander | Konferenzbeitrag |
| 2014 | Numerical and experimental studies towards improvements in laser-acoustic microscopy by optical-based sound beam shaping
Windisch, Thomas | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2014 | Observation of the contact formation of PV frontside pastes by in-situ contact resistance measurement
Reinhardt, Kathrin; Schmidt, Ulrike; Körner, Stefan; Jurk, Robert; Partsch, Uwe; Eberstein, Markus | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2014 | Operating results of the SOFC20 stationary SOFC CHP system using a CFY-stack platform
Hauth, Martin; Rechberger, Jürgen; Megel, Stefan; Kusnezoff, Mihails | Konferenzbeitrag |
| 2014 | Optimization of the synthesis of boron suboxide powders
Ogunmuyiwa, Enoch N.; Johnson, Oluwagbenga T.; Sigalas, Iakovos; Herrmann, Mathias; Afolabi, Ayo Samuel | Konferenzbeitrag |
| 2014 | Optimized shaping process for transparent spinel ceramic
Kaiser, Alfred; Hutzler, Thomas; Krell, Andreas; Kremer, Robert | Konferenzbeitrag |
| 2014 | Optimized shaping process for transparent spinel ceramic
Kaiser, A.; Hutzler, T.; Krell, A.; Kremer, R. | Konferenzbeitrag |
| 2014 | Optische In-situ-Beobachtung des anodischen Auflösungsverhaltens von Kupfer unter ECM-nahen Bedingungen
Schroth, Stephan
: Michaelis, Alexander | Dissertation |
| 2014 | Order of influences on the ballistic resistance of armor ceramics and single crystals
Krell, Andreas; Strassburger, Elmar | Zeitschriftenaufsatz |
| 2014 | Parameters influencing the photocatalytic activity of suspension-sprayed TiO2 coatings
Toma, Filofteia-Laura; Berger, Lutz-Michael; Shakhverdova, Irina; Leupolt, Beate; Potthoff, Annegret; Oelschlägel, Kathrin; Meißner, Tobias; Gomez, José Antonio Ibáñez; Miguel, Yolanda de | Zeitschriftenaufsatz |
| 2014 | Partikelfilter
Mammitzsch, Lars; Petasch, Uwe; Adler, Jörg; Wiegmann, Andreas; Cheng, Liping | Patent |
| 2014 | Performance and stability of mixed conducting composite membranes based on substituted ceria
Pippardt, U.; Böer, J.; Bollert, C.; Hoffmann, A.; Heidenreich, M.; Kriegel, R.; Schulz, M.; Simon, A. | Zeitschriftenaufsatz |
| 2014 | Phased array ultrasonic testing of dissimilar metal welds using geometric based referencing delay law technique
Han, Tae-Young
: Meyendorf, Norbert (Betreuender Hochschullehrer); Wolter, Klaus-Jürgen (Vorsitzender der Promotionskommission); Seo, Jong-Bum (Gutachter) | Dissertation |
| 2014 | Phasenbeziehungen und kinetische Modellierung von flüssigphasengesintertem SiC mit oxidischen und nitridischen Additiven
Neher, Roland
: Michaelis, Alexander; Seifert, Hans Jürgen | Dissertation |
| 2014 | Physics-based simulation of EM and SM in TSV-based 3D IC structures
Kteyan, Armen; Sukharev, Valeriy; Zschech, Ehrenfried | Konferenzbeitrag |
| 2014 | Piezokeramische Dickschichttechnik für Optische Anwendungen - Deformierbare Spiegel und hochintegrierbare Stellelemente
Bramlage, Bernhard; Ernst, Dörthe; Gebhardt, Sylvia; Pabst, Oliver; Reinlein, Claudia | Konferenzbeitrag |
| 2014 | Plenoptic camera with adaptable dephth of field using PZT thick film actuators
Ernst, Dörthe; Bramlage, Bernhard; Gebhardt, Sylvia; Oberdörster, Alexander; Pabst, Oliver; Wippermann, Frank | Konferenzbeitrag |
| 2014 | Polarization characterization of PZT disks and of embedded PZT plates by thermal wave methods
Eydam, Agnes; Suchaneck, Gunnar; Eßlinger, Sophia; Schönecker, Andreas; Neumeister, Peter; Gerlach, Gerald | Konferenzbeitrag |
| 2014 | Porous perovskite fibers - preparation by wet phase inversion spinning and catalytic activity
Kaiser, Sandy; Reichelt, Erik; Gebhardt, Sylvia; Jahn, Matthias; Michaelis, Alexander | Zeitschriftenaufsatz |
| 2014 | Prediction and validation of fiber orientation in short fiber reinforced injection molded SiCN-ceramics
Müller-Köhn, Axel; Ahlhelm, Matthias; Moritz, Tassilo; Michaelis, Alexander; Ladisch, S. | Zeitschriftenaufsatz |
| 2014 | Preparation and characterization of a transparent, photoluminescent MgAl2O4:Eu2+ ceramic
Wätzig, Katja; Kinski, Isabel | Zeitschriftenaufsatz |
| 2014 | Preparation and characterization of new low MWCO ceramic nanofiltration membranes for organic solvents
Zeidler, Stefanie; Puhlfürß, Petra; Kätzel, Uwe; Voigt, Ingolf | Zeitschriftenaufsatz |
| 2014 | PROKOSYS: Prozesse, Komponenten und Systeme für den flexibilisierten Betrieb von Biogasanlagen unter Nutzung biogener Rest- und Abfallstoffe
Faßauer, Burkhardt; Schwarz, Björn | Konferenzbeitrag |
| 2014 | Ptychography with multilayer Laue lenses
Kubec, Adam; Braun, Stefan; Niese, Sven; Krüger, Peter; Patommel, Jens; Hecker, Michael; Leson, Andreas; Schroer, Christian G. | Zeitschriftenaufsatz |
| 2014 | Pulvergemisch für die Herstellung metallischer und/oder keramischer Bauteile, Verfahren zur Herstellung des Pulvergemischs sowie Verfahren zur Herstellung von Bauteilen
Scholl, Roland; Slawik, Tim; Scheithauer, Uwe | Patent |
| 2014 | Quantification of Al₂O₃ nanoparticles in human cell lines applying inductively coupled plasma mass spectrometry (neb-ICP-MS, LA-ICP-MS) and flow cytometry-based methods
Böhme, Steffi; Stärk, Hans-Joachim; Meißner, Tobias; Springer, Armin; Reemtsma, Thorsten; Kühnel, Dana; Busch, Wibke | Zeitschriftenaufsatz |
| 2014 | Quantitative estimate of fs-laser induced refractive index changes in the bulk of various transparent materials
Mermillod-Blondin, Alexandre; Seuthe, Thomas; Eberstein, Markus; Grehn, Moritz; Bonse, Jörn; Rosenfeld, Arkadi | Konferenzbeitrag |
| 2014 | Reactive sintering process and thermoelectric properties of boron rich boron carbides
Roszeitis, S.; Feng, B.; Martin, H.-P.; Michaelis, A. | Zeitschriftenaufsatz |
| 2014 | Reliability assessment of discrete passive components embedded into PCB core
Schwerz, Robert; Röllig, Mike; Osmolovskyi, Sergii; Wolter, Klaus-Jürgen | Konferenzbeitrag |
| 2014 | Reliability study on chip capacitor solder joints under thermo-mechanical and vibration loading
Meier, Karsten; Röllig, Mike; Schießl, Andreas; Wolter, Klaus-Jürgen | Konferenzbeitrag |
| 2014 | Rheologisches Verhalten der beim Strömungsschleifen genutzten SiC-Suspensionen
Bremerstein, Tina; Höhn, Sören; Potthoff, Annegret; Blug, Bernhard; Amann, Tobias | Zeitschriftenaufsatz |
| 2014 | Scannende Erfassung von Ultraschall-Wellenfeldern für die Zerstörungsfreie Prüfung, die Zerstörungsfreie Materialcharakterisierung und die Strukturüberwachung
Köhler, Bernd
: Gerlach, Gerald (Vorsitzender); Wolter, Klaus-Jürgen (Gutachter); Boller, Christian (Gutachter); Mook, Gerhardt (Gutachter) | Habilitationsschrift |
| 2014 | Schnellere Serienproduktion von Lithium-Ionen-Batterien
Ebert, Lars; Roscher, Michael; Wolter, Mareike | Zeitschriftenaufsatz |
| 2014 | Schottky barrier-based silicon nanowire pH sensor with live sensitivity control
Zörgiebel, F.M.; Pregl, S.; Römhildt, L.; Opitz, J.; Weber, W.; Mikolajick, T.; Baraban, L.; Cuniberti, G. | Zeitschriftenaufsatz |
| 2014 | Schweißtechnische Erzeugung und spanende Bearbeitung von Beschichtungen auf (Ti,Mo)(C,N)-Ni-Basis
Zobel, Frank; Dültgen, Peter; Spatzier, Jörg; Nowotny, Steffen; Berger, Lutz-Michael; Wocilka, Danilo; Frank, Dirk | Zeitschriftenaufsatz |
| 2014 | Sensors for environmental monitoring based on localized surface plasmons
Derenko, Susan
: Eng, Lukas (1. Gutachter); Opitz, Jörg (Betreuer); Zhang, Jing (2. Gutachter) | Dissertation |
| 2014 | Separators - technology review: Ceramic based separators for secondary batteries
Nestler, Tina; Schmid, Robert; Münchgesang, Wolfram; Bazhenov, Vasilii; Schilm, Jochen; Leisegang, Tilmann; Meyer, Dirk C. | Konferenzbeitrag |
| 2014 | SiC-diamond materials: Wear-resistant and versatile
Herrmann, Mathias; Matthey, Björn; Kunze, Steffen; Petasch, Uwe | Zeitschriftenaufsatz |
| 2014 | Siliciumcarbid-Feuerfestwerkstoffe für Vergasungsreaktoren
Standke, Gisela; Herrmann, Mathias; Kunze, Steffen; Heymer, Heike; Adler, Jörg; Höhn, Sören | Zeitschriftenaufsatz |
| 2014 | Sinterunterlage
Scholl, Roland; Slawik, Tim | Patent |
| 2014 | Smart solutions for a sustainable future – advances in smart materials, production technologies and applications
Schönecker, Andreas | Konferenzbeitrag |
| 2014 | Sputter deposition of piezoelectric AlN and AlScN films for ultrasonic and energy harvesting applications
Barth, Stefan; Glöß, Daniel; Bartzsch, Hagen; Juuti, J.; Gerlach, Gerald; Suchaneck, Günther; Heuer, Henning; Walter, Susan; Herzog, Thomas; Frach, Peter; Palosaari, J. | Konferenzbeitrag |
| 2014 | Sputter deposition of stress-controlled piezoelectric AlN and AlScN films for ultrasonic and energy harvesting applications
Barth, Stefan; Bartzsch, Hagen; Glöß, Daniel; Walter, Susann; Herzog, Thomas; Frach, Peter; Heuer, Henning | Zeitschriftenaufsatz |
| 2014 | Steady-state creep of porous and an extended analysis on the creep of dense BSCFZ perovskite
Pećanac, Goran; Kiesel, Lutz; Malzbender, Jürgen | Zeitschriftenaufsatz |
| 2014 | Steuerungsvorrichtung für einen Anregungssignal-Generator
Barth, Martin | Patent |
| 2014 | Strength characterization of tubular ceramic materials by flexure of semi-cylindrical specimens
Kwok, K.; Kiesel, L.; Frandsen, H.L.; Søgaard, M.; Hendriksen, P.V. | Zeitschriftenaufsatz |
| 2014 | Structural Health Monitoring (SHM) für ausgedehnte Rohrkomponenten mit geführten Wellen
Weihnacht, Bianca; Frankenstein, Bernd; Gaul, Tobias; Schubert, Lars; Schulze, Eberhard | Konferenzbeitrag |
| 2014 | Studies on the polarisation behaviour of novel piezoelectric sensor modules
Geller, Sirko; Neumeister, Peter; Gude, Maik; Tyczynski, Thomas | Zeitschriftenaufsatz |
| 2014 | Studies on thermoplastic 3D printing of steel-zirconia composites
Scheithauer, Uwe; Bergner, Anne; Schwarzer, Eric; Richter, Hans-Jürgen; Moritz, Tassilo | Zeitschriftenaufsatz |
| 2014 | Summary of the "Open space technology discussions" on reliability of NDE
Bertovic, Marija; Calmon, Pierre; Carter, Luke; Fischer, Jay; Forsyth, David; Holstein, Ralf; McGrath, Bernard; Müller, Christina; Pavlovic, Mato; Ronneteg, Ulf; Rummel, Ward; Schubert, Frank; Selby, Greg | Zeitschriftenaufsatz |
| 2014 | Superharte Werkstoffe auf der Basis von Borsuboxid (B60)
Thiele, Maik
: Michaelis, Alexander (Gutachter / Betreuer); Kleebe, Hans Joachim (Gutachter); Eckert, J. (Vorsitzender der Promotionskommission) | Dissertation |
| 2014 | Superplastic deformation of Si3N4 based nanocomposites reinforced by nanowhiskers
Zgalat-Lozynskyy, O.; Andrzejczuk, Mariusz; Varchenko, V.; Herrmann, Mathias; Ragulya, Andrey; Polotai, Anton | Zeitschriftenaufsatz |
| 2014 | Surface-enhanced infrared spectroscopy using nanometer-sized gaps
Huck, Christian; Neubrech, Frank; Vogt, Jochen; Toma, Andrea; Gerbert, David; Katzmann, Julia; Härtling, Thomas; Pucci, Annemarie | Zeitschriftenaufsatz |
| 2014 | Symposium "Angewandte Elektrochemie in der Materialforschung" 2014. Elektrochemische Methoden in der Batterieforschung. Gut gemacht. Aber richtig interpretiert?
: Michaelis, Alexander; Schneider, Michael | Tagungsband |
| 2014 | Synthesegaserzeugung aus Biogas - Reaktordesign und Integration in ein Festoxidbrennstoffzellensystem
Jahn, Matthias; Reichelt, Erik; Heddrich, Marc; Weder, Aniko | Zeitschriftenaufsatz |
| 2014 | Synthesis and characterization of carbon nanowalls on different substrates by radio frequency plasma enhanced chemical vapor deposition
Davami, K.; Shaygan, M.; Kheirabi, N.; Zhao, J.; Kovalenko, D.A.; Rümmeli, M.H.; Opitz, J.; Cuniberti, G.; Lee, J.-S.; Meyyappan, M. | Zeitschriftenaufsatz |
| 2014 | Synthesis of nano metal particles for low sintering conductive inks
Jurk, Robert; Mosch, Sindy; Fritsch, Marco; Ihle, Martin | Konferenzbeitrag |
| 2014 | Synthetisches Knochenersatzmaterial und Verfahren zu seiner Herstellung
Ahlhelm, Matthias; Moritz, Tassilo | Patent |
| 2014 | System performance comparison employing either partial oxidation or anode offgas circulation as reforming methods within a biogas SOFC system
Heddrich, Marc; Reichelt, Erik; Albrecht, T.; Greß, C.; Jahn, Matthias; Näke, Ralf | Konferenzbeitrag |
| 2014 | TEM investigation of the interface formation in cubic boron nitride containing α-SiAlON composites
Garett, Jethro C.; Sigalas, Iakovos; Herrmann, Mathias | Zeitschriftenaufsatz |
| 2014 | Temperature measurement under near-ECM conditions
Schneider, Michael; Schubert, Nora; Michaelis, Alexander | Konferenzbeitrag |
| 2014 | Testing of thermally piezoelectric deformable mirror with buried functionality
Reinlein, Claudia; Appelfelder, Michael; Goy, Matthias; Gebhardt, Sylvia; Gutzeit, Nam | Konferenzbeitrag |
| 2014 | Thermisch gespritzte Schichten im System Al2O3–Cr2O3–TiO2 - ein Update
Berger, Lutz-Michael; Toma, Filofteia-Laura; Scheitz, Stefan; Trache, Richard; Börner, Tim | Zeitschriftenaufsatz |
| 2014 | Thick film pastes for silicon nitride ceramics
Wenzel, Marco; Schmidt, Richard; Partsch, Uwe; Eberstein, Markus | Konferenzbeitrag |
| 2014 | Third order elastic constants and rayleigh wave dispersion of shot peened aero-engine materials
Rjelka, Marek; Barth, Martin; Reinert, Sven; Köhler, Bernd; Bamberg, Joachim; Baron, Hans Uwe; Hessert, Roland | Konferenzbeitrag |
| 2014 | Towards efficient integrated piezoelectric transducers for sensing, actuation and SHM
Neumeister, Peter; Flössel, Markus; Eßlinger, Sophia; Gebhardt, Sylvia; Schönecker, Andreas | Konferenzbeitrag |
| 2014 | Transparentkeramik als Alternative zu Einkristallen
Wätzig, Katja | Zeitschriftenaufsatz |
| 2014 | Transport of carbon colloid supported nanoscale zero-valent iron in saturated porous media
Busch, Jan; Meißner, Tobias; Potthoff, Annegret; Oswald, Sascha | Zeitschriftenaufsatz |
| 2014 | Untersuchung des Trocknungsverhaltens von dünnen, elektrisch leitfähigen Lacken mit dem Wirbelstromverfahren
Patsora, Iryna; Hillmann, Susanne; Heuer, Henning; Calzada, Juan G.; Cooney, Adam T.; Foos, Bryan C. | Konferenzbeitrag |
| 2014 | Use of phase inversion processes for additive manufacturing of ceramics
Scheithauer, Uwe; Schwarzer, Eric; Schweigard, Lisa; Haderk, Kristin; Visotschnig, Roland; Richter, Hans-Jürgen | Konferenzbeitrag |
| 2014 | Variation der mechanischen Eigenschaften von Sprühgranulaten über die innere Struktur
Eckhard, Susanna; Fries, Manfred; Teipel, Ulrich | Zeitschriftenaufsatz |
| 2014 | Verfahren und Membranmodul zur energieeffizienten Sauerstofferzeugung in der Biomassevergasung
Kriegel, Ralf | Patent |
| 2014 | Verfahren zur Bestimmung der elektrischen Leitfähigkeit an Proben mittels eines Wirbelstromsensors
Joneit, Dieter | Patent |
| 2014 | Verfahren zur Herstellung von gesinterten Bauteilen
Abel, Johannes; Scheithauer, Uwe | Patent |
| 2014 | Vorhersage und Validierung der Faserorientierung in kurzfaserverstärkten, spritzgegossenen SiCN-Keramiken
Müller-Köhn, Axel; Ahlhelm, Matthias; Laddisch, Stefan; Moritz, Tassilo; Michaelis, Alexander | Aufsatz in Buch |
| 2014 | Welding for testability: An approach aimed at improving the ultrasonic testing of thick-walled austenitic and dissimilar metal welds
Wagner, Sabine; Dugan, Sandra; Barth, Martin; Schubert, Frank; Köhler, Bernd | Konferenzbeitrag |
| 2014 | Wettability of rapid thermal firing silver-pastes
Gierth, Paul; Rebenklau, Lars | Konferenzbeitrag |
| 2014 | Wirbelstromprüfvorrichtung, Schaltelement, Wirbelstromprüfverfahren und Verwendung derselben
Joneit, Dieter | Patent |
| 2014 | Wolfram-Dickschichtmetallisierungen im Simultaneinbrand mit Aluminiumnitrid
Joedecke, Christian Bernd
: Michaelis, Alexander | Dissertation |
| 2014 | X-ray microscopy and tomography of hydrogen storage materials
Gluch, J.; Niese, S.; Röntzsch, L.; Zschech, E. | Zeitschriftenaufsatz |
| 2014 | Zerstörungsfreie Fehlerdetektion in Carbonfaser-Gelegen und CFK mit hochfrequenter Wirbelstrom-Messtechnik
Bardl, G.; Nocke, A.; Cherif, C.; Kupke, R.; Klein, M.; Heuer, H. | Zeitschriftenaufsatz |
| 2014 | Zukunftspotenziale von Hochleistungskeramiken
: Voigtsberger, Bärbel (Red.); Rossner, Wolfgang (Red.); Lenk, Reinhard (Red.); Klemens, Joachim (Red.) | Studie |
| 2014 | Zuverlässigkeitsbetrachtungen für einen direktkonvertierenden Röntgenzeilendetektor und dessen Anwendung als spektroskopisches Dosimeter
Lohse, Thomas
: Heuer, Henning (Gutachter); Krüger, Peter (Betreuer) | Dissertation |
| 2014 | Zuverlässigkeitsbewertung von elektrischen und mechanischen Verbindungen mit dem iQPro-Demonstrator
Metasch, René; Röllig, Mike; Wolter, Klaus-Jürgen; Meyendorf, Norbert | Konferenzbeitrag |
| 2014 | |