Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Advanced Characterization Methods for Electrical and Sensoric Components and Devices at the Micro and Nano Scales
Sheremet, E.; Meszmer, P.; Blaudeck, T.; Hartmann, S.; Wagner, C.; Ma, B.; Hermann, S.; Wunderle, B.; Schulz, S.E.; Hietschold, M.; Rodriguez, R.D.; Zahn, D.R.T.
Zeitschriftenaufsatz
2019Affordable and safe high performance vehicle computers with ultra-fast on-board ethernet for automated driving
Hager, M.; Gromala, P.; Wunderle, B.; Rzepka, S.
Konferenzbeitrag
2019Ar+ ions irradiation induced memristive behavior and neuromorphic computing in monolithic LiNbO3 thin films
Pan, X.; Shuai, Y.; Wu, C.; Zhang, L.; Guo, H.; Cheng, H.; Peng, Y.; Qiao, S.; Luo, W.; Wang, T.; Sun, X.; Zeng, H.; Zhang, J.; Zhang, W.; Ou, X.; Du, N.; Schmidt, H.
Zeitschriftenaufsatz
2019Carbon Nanotubes for Mechanical Sensor Applications
Wagner, C.; Blaudeck, T.; Meszmer, P.; Böttger, S.; Fuchs, F.; Hermann, S.; Schuster, J.; Wunderle, B.; Schulz, S.E.
Zeitschriftenaufsatz
2019Characterisation of MOS transistors as an electromechanical transducer for stress
Hafez, M.; Haas, S.; Loebel, K.-U.; Reuter, D.; Ramsbeck, M.; Schramm, M.; Horstmann, J.-T.; Otto, T.
Zeitschriftenaufsatz
2019Comparisons of Solder Joints Fatigue Life Predictions and Several Long-Term Testing Results
Dudek, R.; Kreyssig, K.; Rzepka, S.; Novak, M.; Grübl, W.; Frühauf, P.; Weigert, A.
Konferenzbeitrag
2019Compliance-current-modulated resistive switching with multi-level resistance states in single-crystalline LiNbO3 thin film
Pan, X.; Shuai, Y.; Wu, C.; Luo, W.; Sun, X.; Zeng, H.; Guo, H.; Yuan, Y.; Zhou, S.; Böttger, R.; Cheng, H.; Zhang, J.; Zhang, W.; Schmidt, H.
Zeitschriftenaufsatz
2019A Compound Control System for FR4-Based Electromagnetic Scanning Micrograting
Yu, F.; Wen, Q.; Lei, H.; Huang, L.; Wen, Z.
Zeitschriftenaufsatz
2019Computationally efficient simulation method for conductivity modeling of 2D-based conductors
Rizzi, L.; Zienert, A.; Schuster, J.; Köhne, M.; Schulz, S.E.
Zeitschriftenaufsatz
2019Concept of the 3rd Generation of Reliability for Electronic Smart Systems
Gromala, P.; Dietz, F.; Rzepka, S.; Han, B.
Konferenzbeitrag
2019Design, Modeling, Fabrication, and Verification of New Multifunctional MEMS/NEMS Components
Freitag, M.; Sauppe, M.; Auerswald, C.; Kriebel, D.; Schmidt, H.; Voigt, S.; Arnold, B.; Markert, E.; Hahn, S.; Hiller, K.; Heinkel, U.; Mehner, J.
Zeitschriftenaufsatz
2019Developing a process to remove single silicon layers by atomic layer etching
Dittmar, N.; Kuechler, M.; Meinecke, C.; Reuter, D.; Otto, T.
Konferenzbeitrag
2019Development of a multi-sensor system for condition monitoring and crash detection of machine tools with rotating spindles
Meinecke, C.; Clauss, B.; Albers, J.; Hoeller, H.; Streit, P.; Forke, R.; Weidlich, S.; Dittrich, C.; Stritzke, B.; Schubert, A.; Hiller, K.; Reuter, D.
Konferenzbeitrag
2019Doctor blade system for the deposition of thin semiconducting films
Petrov, D.; Meyers, T.; Reker, J.; Hilleringmann, U.
Konferenzbeitrag
2019Electrically Controlled Actuation of Strained Nanomembranes
Enderlein, T.; Nestler, J.; Stiehl, C.; Morschhauser, A.; Otto, T.
Zeitschriftenaufsatz
2019Electroforming-free resistive switching in yttrium manganite thin films by cationic substitution
Rayapai, V.R.; Bürger, D.; Du, N.; Patra, R.; Skorupa, I.; Blaschke, D.; Stöcker, H.; Matthes, P.; Schulz, S.E.; Schmidt, H.
Zeitschriftenaufsatz
2019Electron transport through NiSi2–Si contacts and their role in reconfigurable field-effect transistors
Fuchs, F.; Gemming, S.; Schuster, J.
Zeitschriftenaufsatz
2019Evaporation study based on micromodel experiments: Comparison of theory and experiment
Geistlinger, H.; Ding, Y.; Apelt, B.; Schlüter, S.; Küchler, M.; Reuter, D.; Vorhauer, N.; Vogel, H.‐J.
Zeitschriftenaufsatz
2019Exchange bias and diffusion processes in laser annealed CoFeB/IrMn thin films
Sharma, A.; Hoffmann, M.A.; Matthes, P.; Busse, S.; Selyshchev, O.; Mack, P.; Exner, H.; Horn, A.; Schulz, S.E.; Zahn, D.R.T.; Salvan, G.
Zeitschriftenaufsatz
2019FR4-based electromagnetic scanning micro-grating integrated with an angle sensor for a low-cost NIR micro-spectrometer
Wen, Q.; Lei, H.; Huang, J.; Yu, F.; Huang, L.; Zhang, J.; Li, D.; Peng, Y.; Wen, Z.
Zeitschriftenaufsatz
2019Fraunhofer-Institut für Elektronische Nanosysteme. Jahresbericht 2018
 
Jahresbericht
2019Highly Miniaturized MEMS‐Based Test Platforms for Thermo‐Mechanical and Reliability Characterization of Nano‐Functional Elements - Technology and Functional Test Results
Meszmer, P.; Hahn, S.; Hiller, K.; Wunderle, B.
Zeitschriftenaufsatz
2019The Implementation of Semiconductor Based Biosensors Into Point of Need Systems for the Automatized Analysis of Complex Samples
Geidel, S.; Morschhauser, A.; Otto, T.
Konferenzbeitrag
2019An improved Green's function algorithm applied to quantum transport in carbon nanotubes
Teichert, F.; Zienert, A.; Schuster, J.; Schreiber, M.
Zeitschriftenaufsatz
2019Improved organic thin-film transistor performance by dielectric layer patterning
Meyers, T.; Reker, J.; Temme, J.; Vidor, F.F.; Vollbrecht, J.; Kitzerow, H.; Paradies, J.; Hilleringmann, U.
Konferenzbeitrag
2019Induktionserwärmung für das Cu-Sn SLID-Waferbonden zum Packaging in der Mikrosystemtechnik
Hofmann, C.; Froehlich, A.; Kroll, M.; Wiemer, M.
Konferenzbeitrag
2019Induktives Fügen in der Mikrosystemtechnik
Hofmann, C.; Fröhlich, A.
Zeitschriftenaufsatz
2019Inkjet Printing of Self‐Supporting and Self‐Contained Structured Objects Onto Liquid Surfaces
Goedel, W.A.; Gläser, K.; Mitra, D.; Thalheim, R.; Ueberfuhr, P.; Hammerschmidt, J.; Baumann, R.R.
Zeitschriftenaufsatz
2019Inorganic p-channel thin-film transistors using CuO nanoparticles
Reker, J.; Meyers, T.; Vidor, F.F.; Hilleringmann, U.
Konferenzbeitrag
2019Integration of plasmonic nanostructures for micro-opto-electromechanical-systems
Heldt, G.; Weiss, A.; Helke, C.; Erben, J.; Kurth, S.; Meinig, M.; Martin, J.; Hiller, K.; Reuter, D.; Otto, T.
Konferenzbeitrag
2019Investigation of Active Power Cycling Combined With Passive Thermal Cycles on Discrete Power Electronic Devices
Otto, A.; Rzepka, S.; Wunderle, B.
Zeitschriftenaufsatz
2019Iron(III) β-diketonates: CVD precursors for iron oxide film formation
Pousaneh, E.; Korb, M.; Assim, K.; Rüffer, T.; Dzhagan, V.; Noll, J.; Zahn, D.R.T.; Schulz, S.E.; Lang, H.
Zeitschriftenaufsatz
2019Joining two worlds - hybrid integration of silicon based electronics and printed functionalities
Roscher, F.; Thalheim, R.; Seifert, T.; Paul, S.-D.; Zichner, R.; Wiemer, M.; Otto, T.
Konferenzbeitrag
2019Low Power High Bandwidth Acceleration Sensor For Industrial Applications
Forke, R.; Hiller, K.; Hahn, S.; Weidlich, S.; Konietzka, S.; Motl, T.; Praedicow, A.; Otto, T.
Konferenzbeitrag
2019Magnetic tunnel junctions: Laser annealing versus oven annealing
Sharma, A.; Hoffmann, M.A.; Matthes, P.; Koehler, N.; Busse, S.; Mueller, M.; Exner, H.; Schulz, S.E.; Zahn, D.R.T.; Salvan, G.
Zeitschriftenaufsatz
2019Measurements on the fly: Introducing mobile micro-sensors for biotechnological applications
Lauterbach, T.; Lüke, T.; Büker, M.-J.; Hedayat, C.; Gernandt, T.; Moll, R.; Grösel, M.; Lenk, S.; Seidel, F.; Brunner, D.; Bley, T.; Walther, T.; Lenk, F.
Zeitschriftenaufsatz
2019Mechanical deformation on nanoparticle-based thin-film transistors
Vidor, F.F.; Meyers, T.; Reker, J.; Mueller, K.; Wirth, G.I.; Hilleringmann, U.
Konferenzbeitrag
2019A MEMS IR optical chopper based on subwavelength structures
Kurth, S.; Meinig, M.; Wecker, J.; Seifert, M.; Hiller, K.; Otto, T.
Konferenzbeitrag
2019Micromachined phase-shifted array-type Mirau interferometer for swept-source OCT imaging
Gorecki, C.; Lullin, J.; Perrin, S.; Bargiel, S.; Albero, J.; Gaiffe, O.; Rutkovvski, J.; Cote, J.M.; Krauter, J.; Osten, W.; Wang, W.-S.; Weimer, M.; Froemel, J.
Zeitschriftenaufsatz
2019Microwave Radiation Detection with an Ultrathin Free-Standing Superconducting Niobium Nanohelix
Loesch, S.; Alfonsov, A.; Dobrovolskiy, O.V.; Keil, R.; Engemaier, V.; Baunack, S.; Li, G.; Schmidt, O.G.; Buerger, D.
Zeitschriftenaufsatz
2019Mikro- und Nanotechnologien zur Herstellung steuerbarer optischer Filter
Hiller, K.; Helke, C.; Seifert, M.; Seiler, J.; Kurth, S.; Meinig, M.; Otto, T.
Konferenzbeitrag
2019Miniaturized multi sensor implant for monitoring of hemodynamic parameters
Dogan, Özgü; Schierbaum, Nicolas; Weidenmüller, Jens; Baum, Mario; Schröder, Thomas; Wünsch, Dirk; Görtz, Michael; Seidl, Karsten
Konferenzbeitrag
2019Multisensor-Implantat zur Überwachung der Hämodynamik
Dogan, Özgü; Schierbaum, Nicolas; Weidenmüller, Jens; Baum, Mario; Görtz, Michael; Seidl, Karsten
Konferenzbeitrag
2019Nanoparticles and Organic Semiconductors for Flexible Electronics
Hilleringmann, U.; Reker, J.; Meyers, T.; Vidor, F.F.; Bezuidenhout, P.H.; Joubert, T.-H.
Konferenzbeitrag
2019Nanostructured al SWG Reflectors on thin LP-Si3N4 membranes as (TiO2/SiO2)³ Bragg reflector alternative for VIS Fabry-Pérot Interferometers
Helke, C.; Hiller, K.; Seiler, J.; Erben, J.; Werner, T.; Reuter, D.; Meinig, M.; Kurth, S.; Otto, T.
Konferenzbeitrag
2019Next Generation of highly miniaturized Bulk-MEMS Fabry-Pérot Filters for infrared Microspectrometers
Ebermann, M.; Neumann, N.; Hoppe, S.; Hiller, K.; Seiler, J.; Helke, C.; Meinig, M.; Kurth, S.
Konferenzbeitrag
2019A Nonlinear Broadband Electromagnetic Vibration Energy Harvester Based on Double-Clamped Beam
Lu, Z.; Wen, Q.; He, X.; Wen, Z.
Zeitschriftenaufsatz
2019A Novel Indirect Quasi-Static Actuation Concept for 2D MEMS Micromirrors
Kaupmann, P.; Pinter, S.; Franz, J.; Streiter, R.; Otto, T.
Zeitschriftenaufsatz
2019Optimization of Platinum dioxide properties by plasma oxidation of sputtered PtOx
Basu, Nivedita; Sterin, N.S.; Saketh, Ram Mamidala; Shenoy, Apoorva; Bhat, Navakanta
Zeitschriftenaufsatz
2019Oxygen detection with zinc oxide nanoparticle structures
Schwabe, T.; Balke, A.; Bezuidenhout, P.H.; Reker, J.; Meyers, T.; Joubert, T.-H.; Hilleringmann, U.
Konferenzbeitrag
2019P-N Junction-Based Si Biochips with Ring Electrodes for Novel Biosensing Applications
Kiani, M.; Du, N.; Vogel, M.; Raff, J.; Hübner, U.; Skorupa, I.; Bürger, D.; Schulz, S.E.; Schmidt, O.G.; Schmidt, H.
Zeitschriftenaufsatz
2019Parameter dependency of DNA origami immobilization at micro- and nano structured CF polymer surfaces on SiO2
Hann, J.; Helke, C.; Lakatos, M.; Heerwig, A.; Nestler, J.; Erben, J.; Reuter, D.; Mertig, M.; Otto, T.
Zeitschriftenaufsatz, Konferenzbeitrag
2019Photosensitive Field‐Effect Transistors Made from Semiconducting Carbon Nanotubes and Non‐Covalently Attached Gold Nanoparticles
Blaudeck, T.; Preuß, A.; Scharf, S.; Notz, S.; Kossmann, A.; Hartmann, S.; Kasper, L.; Mendes, R.G.; Gemming, T.; Hermann, S.; Lang, H.; Schulz, S.E.
Zeitschriftenaufsatz
2019Plattformkonzept zum Aufbau von hochintegrierten Multisensorknoten
Becker, Karl-Friedrich; Böttcher, Mathias; Schiffer, Michael; Pötter, Harald; Brockmann, Carsten; Freimund, Damian; Tschoban, Christian; Windrich, Frank; Braun, Tanja; Hopsch, Fabian; Heinig, Andy; Voigt, Sven; Baum, Mario; Hofmann, Lutz; Lang, Klaus-Dieter
Konferenzbeitrag
2019Printing Reinforcing Structures onto Microsieves that are Floating on a Water Surface
Goedel, W.A.; Gläser, K.; Mitra, D.; Hammerschmidt, J.; Thalheim, R.; Ueberfuhr, P.; Baumann, R.R.
Zeitschriftenaufsatz
2019Radially resolved electronic structure and charge carrier transport in silicon nanowires
Fuchs, F.; Gemming, S.; Schuster, J.
Zeitschriftenaufsatz
2019Regeneration of Assembled, Molecular-Motor-Based Bionanodevices
Rahman, M.A.; Reuther, C.; Lindberg, F.W.; Mengoni, M.; Salhotra, A.; Heldt, G.; Linke, H.; Diez, S.; Mansson, A.
Zeitschriftenaufsatz
2019Role of contacts in carbon nanotube giant piezoresistive sensors
Böttger, S.; Wagner, C.; Lorkowski, F.; Hartmann, M.; Heldt, G.; Reuter, D.; Schuster, J.; Hermann, S.
Konferenzbeitrag
2019Sealing of glass with titanium by glass pressing at the softening point
Winkler, Sebastian; Edelmann, Jan; Günther, Daniel; Wieland, Sebastian; Selbmann, Franz; Baum, Mario; Schubert, Andreas
Zeitschriftenaufsatz
2019Selective Induction Heating of Metallic Microstructures for Wafer-Level MEMS Packaging
Froehlich, A.; Hofmann, C.; Rochala, P.; Kimme, J.; Kroll, M.; Kraeusel, V.
Konferenzbeitrag
2019Self-aligned organic thin-film transistors for flexible electronics
Meyers, T.; Reker, J.; Temme, J.; Vidor, F.F.; Hilleringmann, U.
Konferenzbeitrag
2019Sensitivity control of carbon nanotube-based piezoresistive sensors by drain-induced barrier thinning
Böttger, S.; Wagner, C.; Lorkowski, F.; Hartmann, M.; Schuster, J.; Hermann, S.
Zeitschriftenaufsatz
2019Spectroscopic ellipsometry and magneto-optical Kerr effect spectroscopy study of thermally treated Co60Fe20B20 thin films
Hoffmann, M.A.; Sharma, A.; Matthes, P.; Okano, S.; Hellwig, O.; Ecke, R.; Zahn, D.R.T.; Salvan, G.; Schulz, S.E.
Zeitschriftenaufsatz
2019Strain and screening: Optical properties of a small-diameter carbon nanotube from first principles
Wagner, C.; Schuster, J.; Schleife, A.
Zeitschriftenaufsatz
2019Surface effects and photoinduced relaxation processes in nanocomposites based on semiconductor quantum dots CdSe/ZnS and organic dye molecules
Zenkevich, E.I.; Stupak, A.P.; Kowerko, D.; Blaudeck, T.; Borczyskowski, C. von
Konferenzbeitrag
2019Synthesis of Mg and Zn diolates and their use in metal oxide deposition
Frenzel, P.; Preuß, A.; Bankwitz, J.; Georgi, C.; Ganss, F.; Mertens, L.; Schulz, S.E.; Hellwig, O.; Mehring, M.; Lang, H.
Zeitschriftenaufsatz
2019Technological Platform for Vertical Multi-Wafer Integration of Microscanners and Micro-Optical Components
Bargiel, S.; Baranski, M.; Wiemer, M.; Frömel, J.; Wang, W.-S.; Gorecki, C.
Zeitschriftenaufsatz
2018"3rd Level" Solder Joint Reliability Investigations for Transfer of Consumer Electronics in Automotive Use
Dudek, R.; Hildebrandt, M.; Kreyßig, K.; Rzepka, S.; Döring, R.; Seiler, B.; Fries, T.; Zhang, M.; Ortmann, R.W.
Konferenzbeitrag
20183D-Packaging-Technologien zur Herstellung intelligenter medizinischer Implantate
Wuensch, D.; Schroeder, T.; Baum, M.; Hiller, K.; Forke, R.; Wiemer, M.; Weidenmueller, J.; Dogan, O.; Goertz, M.
Konferenzbeitrag
2018Active flow control in wind turbines - integration technologies and assessment of economic effects
Schüller, Martin; Lipowski, Mathias; Weigel, Perez; Symmank, Christina; Meynerts, Lilly; Walther, Marco; Dziuba, Franz; Otto, Thomas; Götze, Uwe; Kroll, Lothar
Konferenzbeitrag
2018AlN film based piezoelectric large-aperture MEMS scanning micromirror integrated with angle sensors
Lei, H.; Wen, Q.; Yu, F.; Li, D.; Shang, Z.; Huang, J.; Wen, Z.
Zeitschriftenaufsatz
2018Aluminum Patterned Electroplating from AlCl3-[EMIm]Cl Ionic Liquid Towards Microsystems Application
Al Farisi, M.S.; Hertel, S.; Wiemer, M.; Otto, T.
Zeitschriftenaufsatz
2018Application of quantum cascade laser absorption spectroscopy for correlation studies in plasma etching processes in the semiconductor industry
Lang, N.; Zimmermann, S.; Zimmermann, H.; Macherius, U.; Uhlig, B.; Schaller, M.; Schulz, S.E.; Röpcke, J.; Helden, J.H. van
Konferenzbeitrag
2018Application-driven reliability research of next generation for automotive electronics: Challenges and approaches
Rzepka, S.; Otto, A.; Vogel, D.; Dudek, R.
Zeitschriftenaufsatz
2018Approach to combine electron-beam lithography and two-photon polymerization for enhanced nano-channels in network-based biocomputation devices
Heldt, Georg; Meinecke, Christoph; Steenhusen, Sönke; Korten, Till; Groß, Matteo; Domann, Gerhard; Lindberg, F.; Reuter, Danny; Diez, S.; Linke, H.; Schulz, Stefan E.
Konferenzbeitrag
2018Automated virtual prototyping for fastest time-to-market of new system in package solutions
Gadhiya, G.; Brämer, B.; Rzepka, S.
Konferenzbeitrag
2018β-Ketoiminato-based copper(II) complexes as CVD precursors for copper and copper oxide layer formation
Pousaneh, E.; Korb, M.; Dzhagan, V.; Weber, M.; Noll, J.; Mehring, M.; Zahn, D.R.T.; Schulz, S.E.; Lang, H.
Zeitschriftenaufsatz
2018Bidirectional data transmission for battery-less medical implants
Dogan, Özgü; Hennig, Andreas; Stanitzki, Alexander; Baum, Mario; Grabmaier, Anton
Abstract
2018Challenges in transferring quantum dot sensitized solar cells on technical textiles
Heinrich, K.; Martin, J.; Mehlhorn, H.; Langenickel, J.; Selbmann, F.; Hartwig, M.; Otto, T.
Konferenzbeitrag
2018Combined simulation and optical measurement technique for investigation of system effects on components solder fatigue
Dudek, R.; Hildebrandt, M.; Rzepka, S.; Fries, T.; Döring, R.; Seiler, B.; Ortmann, R.W.
Zeitschriftenaufsatz
2018Deposition methods for C8-BTBT in flexible TFTs
Meyers, T.; Reker, J.; Vidor, F.F.; Hilleringmann, U.
Konferenzbeitrag
2018Deposition speed optimization for ZnO nanoparticle TFTs using doctor blade process
Reker, J.; Meyers, T.; Vidor, F.F.; Hilleringmann, U.
Konferenzbeitrag
2018Design and fabrication of multilayer inkjet-printed passive components for printed electronics circuit development
Correia, V.; Mitra, K.Y.; Castro, H.; Rocha, J.G.; Sowade, E.; Baumann, R.R.; Lanceros-Méndez, S.
Zeitschriftenaufsatz
2018Design methodology and results evaluation of a heating functionality in modular lab-on-chip systems
Streit, P.; Nestler, J.; Shaporin, A.; Graunitz, J.; Otto, T.
Zeitschriftenaufsatz
2018Design of robust packages by deliberate release of elastic energy to avoid interfacial crack propagation
Pufall, R.; Goroll, M.; Reuther, G.M.; Pflügler, N.; Udiljak, D.; Dudek, R.
Konferenzbeitrag
2018Effizienter Modellierungsansatz für die transiente, gekoppelte elektro-thermische Simulation am Beispiel einer D²PAK-Anwendung
Schacht, R.; Rzepka, S.
Konferenzbeitrag
2018Einfluss von Defekten auf die Gitterschwingungen von Kohlenstoffnanoröhren
Noerdemann, A.
Bachelor Thesis
2018Electroanalysis moves towards paper-based printed electronics
Cinti, S.; Colozza, N.; Cacciotti, I.; Moscone, D.; Polomoshnov, M.; Sowade, E.; Baumann, R.R.; Arduini, F.
Zeitschriftenaufsatz
2018Electrochemical deposition of reactive material systems for assembly and packaging applications
Hertel, Silvia; Schulte, Wiebke; Weiser, Mathias; Becker, Mike; Wiemer, Maik; Otto, Thomas
Konferenzbeitrag
2018Electroforming-free resistive switching in polycrystalline YMnO3 thin films
Rayapati, V.R.; Du, N.; Bürger, D.; Patra, R.; Skorupa, I.; Matthes, P.; Stöcker, H.; Schulz, S.E.; Schmidt, H.
Zeitschriftenaufsatz
2018Electronic transport through defective semiconducting carbon nanotubes
Teichert, F.; Zienert, A.; Schuster, J.; Schreiber, M.
Zeitschriftenaufsatz
2018Elektrochemische Abscheidung für die Leiterplatte
Hertel, S.; Wuensch, D.; Wiemer, M.; Otto, T.; Friedrich, S.
Konferenzbeitrag
2018Elektronentransport in Graphen-Nanobändern mit Kantenrauheit
Rodemund, T.S.
Bachelor Thesis
2018Entwicklung eines Prozesses für das Entfernen von SiO2-Monolagen mittels Fluorkohlenstoff
Dittmar, N.; Kuechler, M.; Meinecke, C.; Reuter, D.; Otto, T.
Konferenzbeitrag
2018Entwicklung von Schwingungssensoren auf MEMS-Basis für Condition Monitoring Systeme im Maschinen- und Anlagenbau
Dittrich, C.; Forke, R.; Hiller, K.; Kreutziger, P.; Kuerschner, R.; Meinecke, C.; Reuter, D.; Weidlich, S.; Streit, P.; Hahn, S.
Konferenzbeitrag
2018Evaluation of Ag-sinter and CuSn-TLP based joining technologies on lead frame
Otto, A.; Schroeder, T.; Dudek, R.; Wang, W.-S.; Baum, M.; Wiemer, M.; Doering, R.; Kurian, J.J.; Murayama, K.; Oi, K.; Koyama, T.; Rzepka, S.
Konferenzbeitrag
2018Fabrication and operation of protein-powered biocomputation using nanostructured networks
Meinecke, C.; Reuter, D.; Schulz, S.E.; Korten, T.; Heldt, G.; Diez, S.
Konferenzbeitrag
2018Fabrication of organic photo detectors using inkjet technology and its comparison to conventional deposition processes
Cherian, D.; Mitra, K.Y.; Hartwig, M.; Malinowski, P.E.; Baumann, R.R.
Zeitschriftenaufsatz
2018Feasible device architectures for ultrascaled CNTFETs
Pacheco-Sanchez, A.; Fuchs, F.; Mothes, S.; Zienert, A.; Schuster, J.; Gemming, S.; Claus, M.
Zeitschriftenaufsatz
2018Field-Driven Hopping Transport of Oxygen Vacancies in Memristive Oxide Switches with Interface-Mediated Resistive Switching
Du, N.; Manjunath, N.; Li, Y.; Menzel, S.; Linn, E.; Waser, R.; You, T.; Bürger, D.; Skorupa, I.; Walczyk, D.; Walczyk, C.; Schmidt, O.G.; Schmidt, H.
Zeitschriftenaufsatz
2018FR4-Based Electromagnetic Scanning Micromirror Integrated with Angle Sensor
Lei, H.; Wen, Q.; Yu, F.; Zhou, Y.; Wen, Z.
Zeitschriftenaufsatz
2018Fraunhofer-Institut für Elektronische Nanosysteme. Jahresbericht 2017
 
Jahresbericht
2018Functional integration - structure-integrated wireless sensor technology targeting smart mechanical engineering applications
Rülke, Steffen; Beyer, Volkhard; Zorn, Wolfgang; Meinig, Marco; Wecker, Julia; Reuter, Danny; Deicke, Frank; Clausner, André; Werner, Thomas
Konferenzbeitrag
2018Impedance-controlled design and connection technology for micromounting and hybrid integration of high-frequency and mixed-signal systems with MID technology
Geneiß, V.; Lüke, T.; Hedayat, C.; Wolf, M.; Janek, F.; Meißner, T.; Barth, M.; Eberhardt, W.; Zimmermann, A.; Otto, T.
Konferenzbeitrag
2018Implantable multi-sensor system for hemodynamic controlling
Weidenmüller, Jens; Dogan, Özgü; Stanitzki, Alexander; Baum, Mario; Schröder, Tim; Wünsch, Dirk; Görtz, Michael; Grabmaier, Anton
Zeitschriftenaufsatz
2018An Improved Design for 2D Arrays of Capacitive Micromachined Ultrasound Transducers: Modeling, Fabrication, and Characterization
Baum, M.; Saeidi, N.; Vogel, K.; Schroeder, T.; Selvam, K.G.M.; Wiemer, M.; Otto, T.
Konferenzbeitrag
2018Indirect X-ray detectors based on inkjet-printed photodetectors with a screen-printed scintillator layer
Oliveira, J.; Correia, V.; Sowade, E.; Etxebarria, I.; Rodriguez, R.D.; Mitra, K.Y.; Baumann, R.R.; Lanceros-Méndez, S.
Zeitschriftenaufsatz
2018Influence of defect-induced deformations on electron transport in carbon nanotubes
Teichert, F.; Wagner, C.; Croy, A.; Schuster, J.
Zeitschriftenaufsatz
2018Influence of the electrode material on the performance of BTBT-based thin-film transistors
Meyers, T.; Reker, J.; Petrov, D.; Hilleringmann, U.; Vidor, F.F.
Konferenzbeitrag
2018Inkjet printing of patterned nanocarbon absorber layers for pyroelectric infrared detectors
Zeiner, C.; Polomoshnov, M.; Müller, M.; Sowade, E.; Günther, A.; Neumann, N.; Seifert, T.; Blaudeck, T.; Hermann, S.; Baumann, R.R.; Wiemer, M.; Otto, T.
Konferenzbeitrag
2018Integration of covalent and non-covalent functionalized SWCNTs in FETs
Kossmann, A.; Adner, D.; Blaudeck, T.; Hermann, S.; Schulz, S.E.; Lang, H.
Abstract
2018Investigation of active power cycling combined with passive thermal cycles on discrete power electronic devices for automotive applications
Otto, A.; Rzepka, S.; Wunderle, B.
Konferenzbeitrag
2018Investigation of aluminum patterned electrodeposition process from AlCl3-[EMIm]Cl ionic liquid for microsystems application
Farisi, M.S.A.; Hertel, S.; Wiemer, M.; Otto, T.
Konferenzbeitrag
2018Investigation on the influence of injection molding parameters on high frequency permittivity up to 3 GHz on MID thermoplastics and reliability of permittivity during environmental testing
Wolf, M.; Janek, F.; Meissner, T.; Wigger, B.; Barth, M.; Guenter, T.; Eberhardt, W.; Zimmermann, A.; Geneiss, V.; Lueke, T.; Hedayat, C.; Otto, T.
Konferenzbeitrag
2018Investigations of the impact of initial stresses on fracture and delamination risks of an avionics MEMS pressure sensor
Auersperg, J.; Auerswald, E.; Collet, C.; Dean, T.; Vogel, D.; Winkler, T.; Rzepka, S.
Zeitschriftenaufsatz
2018Klebeelement und Ventilanordnung
Morschhauser, Andreas; Nestler, Jörg; Otto, Thomas; Stiehl, Cornelia
Patent
2018Leitprojekt "Go Beyond 4.0". Individualisierte Massenfertigung
Otto, T.
Aufsatz in Buch
2018Liquid crystalline dithienothiophene derivatives for organic electronics
Vollbrecht, J.; Oechsle, P.; Stepen, A.; Hoffmann, F.; Paradies, J.; Meyers, T.; Hilleringmann, U.; Schmidtke, J.; Kitzerow, H.
Zeitschriftenaufsatz
2018Long-term thermal fatigue testing of solder joints and related fatigue life predictions
Dudek, R.; Hildebrandt, M.; Kreyßig, K.; Rzepka, S.; Novak, M.; Grübl, W.; Schuck, B.
Konferenzbeitrag
2018Lotermüdung von SAC- und Innolot-Verbindungen unter Langzeit-Feldbeanspruchungen und vergleichende Simulationen
Dudek, R.; Hildebrandt, M.; Kreyßig, K.; Rzepka, S.; Novak, M.; Beart, K.; Grübl, W.; Schuch, B.
Konferenzbeitrag
2018Magnesium β-ketoiminates as CVD precursors for MgO formation
Pousaneh, E.; Rüffer, T.; Assim, K.; Dzhagan, V.; Noll, J.; Zahn, D.R.T.; Mertens, L.; Mehring, M.; Schulz, S.E.; Lang, H.
Zeitschriftenaufsatz
2018Magneto-optical spectroscopy and spectroscopic ellipsometry of Co60Fe20B20 thin films
Sharma, A.; Almeida, M.; Matthes, P.; Ecke, R.; Zahn, D.R.T.; Schulz, S.E.; Salvan, G.
Abstract
2018Method for assessing the delamination risk in BEoL stacks around copper TSV applying nanoindentation and finite element simulation
Albrecht, J.; Weissbach, M.; Auersperg, J.; Rzepka, S.
Konferenzbeitrag
2018A micro-electromechanical systems based vibration energy harvester with aluminum nitride piezoelectric thin film deposited by pulsed direct-current magnetron sputtering
He, X.; Wen, Q.; Lu, Z.; Shang, Z.; Wen, Z.
Zeitschriftenaufsatz
2018Mikro- und Nanotechnologien zur Herstellung steuerbarer optischer Komponenten
Hiller, K.; Helke, C.; Seifert, M.; Seiler, J.; Kurth, S.; Meinig, M.; Wecker, J.
Konferenzbeitrag
2018Miniaturized NIR Spectrometer Based on Novel MOEMS Scanning Tilted Grating
Huang, J.; Wen, Q.; Nie, Q.; Chang, F.; Zhou, Y.; Wen, Z.
Zeitschriftenaufsatz
2018Multiscale residual stress analysis in thin film layers
Weißbach, M.; Auerswald, E.; Hildebrandt, M.; Rzepka, S.
Konferenzbeitrag
2018Multiscale simulation of metallic copper and copper oxide atomic layer deposition from Cu Beta-diketonates
Hu, X.
Dissertation
2018Nanostructures for smart systems
Martin, J.; Saupe, R.; Langenickel, J.; Moebius, M.; Heinrich, K.; Weiß, A.; Otto, T.
Konferenzbeitrag
2018A Novel Concept for Accelerated Stress Testing of Thermal Greases and In-situ Observation of Thermal Contact Degradation
Wunderle, B.; May, D.; Heilmann, J.; Arnold, J.; Hirscheider, J.; Li, Y.; Bauer, J.; Ras, M.A.
Konferenzbeitrag
2018On the Experimental Characterization of Morphing Structures
Dimino, I.; Amendola, G.; Pecora, R.; Concilio, A.; Gratias, A.; Schueller, M.
Aufsatz in Buch
2018On the thermo-mechanical risk assessment of complex Printed Circuit Boards (PCB) by finite element modelling and warpage measurements
Albrecht, J.; Braemer, B.; Hildebrandt, M.; Taubert, P.
Konferenzbeitrag
2018On the TSV delamination risk dependence on TSV distance and silicon crystal orientation
Auersperg, J.; Albrecht, J.; Rzepka, S.
Konferenzbeitrag
2018Parylene as a Dielectric Material for Electronic Applications in Space
Selbmann, F.; Baum, M.; Wiemer, M.; Joseph, Y.; Otto, T.
Konferenzbeitrag
2018Performance analysis of CuO nanoparticle-based thin-film transistors
Reker, J.; Meyers, T.; Petrov, D.; Vidor, F.F.; Hilleringmann, U.
Konferenzbeitrag
2018Plasmonic dipole nanoantennas on a SiO2/Si substrate and their characterization undefined
Haugwitz, T.; Erben, J.; Neumann, N.; Reuter, D.; Plettemeier, D.
Konferenzbeitrag
2018Polymer-based doping control for performance enhancement of wet-processed short-channel CNTFETs
Hartmann, M.; Schubel, R.; Claus, M.; Jordan, R.; Schulz, S.E.; Hermann, S.
Zeitschriftenaufsatz
2018Portable Sensor System for UV-Irradiation Measurements
Petrov, D.; Narayan, R.S.; Hilleringmann, U.
Konferenzbeitrag
2018Printed batteries and conductive patterns in technical textiles
Willert, A.; Meuser, C.; Baumann, R.R.
Zeitschriftenaufsatz, Konferenzbeitrag
2018Printing techniques for batteries
Willert, A.; Tran-Le, A.-T.; Mitra, K.Y.; Clair, M.; Costa, C.M.; Lanceros-Méndez, S.; Baumann, R.R.
Aufsatz in Buch
2018Process development of large area R2R printing and sintering of conductive patterns by inkjet and infra-red technologies tailored for printed electronics
Mitra, K.Y.; Kapadia, S.; Hartwig, M.; Sowade, E.; Xu, Z.; Baumann, R.R.; Zichner, R.
Zeitschriftenaufsatz
2018Quantum transport in defective carbon nanotubes at mesoscopic length scales
Teichert, F.
Dissertation
2018Reactive bonding with oxide based reactive multilayers
Vogel, K.; Roscher, F.; Wiemer, M.; Zimmermann, S.; Otto, T.
Konferenzbeitrag
2018Real time solid waste monitoring using cloud and sensors technologies
Likotiko, E.; Petrov, D.; Mwangoka, J.; Hilleringmann, U.
Zeitschriftenaufsatz
2018Reliability assessment and failure mode analysis of MEMS accelerometers for space applications
Marozau, I.; Auchlin, M.; Pejchal, V.; Souchon, F.; Vogel, D.; Lahti, M.; Saillen, N.; Sereda, O.
Zeitschriftenaufsatz
2018Reliability testing of integrated low-temperature PVD PZT films
Monteiro Diniz Reis, D.; Rzepka, S.; Hiller, K.
Zeitschriftenaufsatz, Konferenzbeitrag
2018RFID units for a product based control of industrial production systems
Schmidt, M.; Metz, G.; Hedayat, C.; Otto, T.; Petrov, D.
Konferenzbeitrag
2018The role of plasma analytics in leading-edge semiconductor technologies
Zimmermann, S.; Haase, M.; Lang, N.; Röpcke, J.; Schulz, S.E.; Otto, T.
Zeitschriftenaufsatz, Konferenzbeitrag
2018SAMPL - Secure Additive Manufacturing Platform
Gratias, A.; Böttcher, F.; Holland, M.; Schueller, M.
Konferenzbeitrag
2018Scaling up integration of carbon nanotubes into Micro-Electro-Mechanical systems
Böttger, S.; Jöhrmann, N.; Bonitz, J.; Wunderle, B.; Schulz, S.E.; Hermann, S.
Konferenzbeitrag
2018Special issue on 4th International Conference on Smart Systems Engineering (SmaSys 2016)
Khosla, A.; Furukawa, H.; Michel, B.
Zeitschriftenaufsatz, Konferenzbeitrag
2018Special Issue: International Conference on Applied System Innovation (ICASI 2017)
Young, S.-J.; Meen, T.-H.; Khosla, A.; Michel, B.
Zeitschriftenaufsatz, Konferenzbeitrag
2018Stochastic analyzes and Monte-Carlo simulations of nonlinear and non-ideal mixed-signal phase-locked loops
Schmidt, M.; Hangmann, C.; Hedayat, C.; Hilleringmann, U.; Otto, T.
Konferenzbeitrag
2018Stochastische Untersuchung von Oberflächeninteraktionen hochenergetischer Teilchen
Rothe, T.
: Gemming, S.; Schuster, J.; Lorenz, E.
Bachelor Thesis
2018Stress analyses in HPC-soldered assemblies by optical measurement and FEA
Dudek, R.; Döring, R.; Rzepka, S.; Herberholz, T.; Feil, D.; Seiler, B.; Scheiter, L.; Schellenberg, C.; Fritzsche, S.
Konferenzbeitrag
2018Strukturierungsverfahren
Fader, Robert; Lorenz, Jürgen; Rommel, Mathias; Baum, Mario; Danylyuk, Serhiy; Gillner, Arnold; Stollenwerk, Jochen; Bläsi, Benedikt
Aufsatz in Buch
2018Technologie zur Herstellung von nanostrukturierten Netzwerken für biomolekularbetriebene Computer
Meinecke, C.; Korten, T.; Heldt, G.; Reuter, D.; Diez, S.; Schulz, S.E.
Konferenzbeitrag
2018Tetranuclear yttrium and gadolinium 2-acetylcyclopentanoate clusters: Synthesis and their use as spin-coating precursors for metal oxide film formation for field-effect transistor fabrication
Pousaneh, E.; Preuß, A.; Assim, K.; Rüffer, T.; Korb, M.; Tittmann-Otto, J.; Hermann, S.; Schulz, S.E.; Lang, H.
Zeitschriftenaufsatz
2018Thermo-mechanical characterisation of thin sputtered copper films on silicon: Towards elasto-plastic, fatigue and subcritical fracture-mechanical data
Wunderle, B.; May, D.; Zschenderlein, U.; Ecke, R.; Springborn, M.; Jöhrmann, N.; Pareek, K.A.; Heilmann, J.; Stiebing, M.; Arnold, J.; Dudek, R.; Schulz, S.; Wolf, M.J.; Rzepka, S.
Konferenzbeitrag
2018Time Domain Electrical Characterization in Zinc Oxide Nanoparticle Thin-Film Transistors
Becker, T.E.; Vidor, F.F.; Wirth, G.I.; Meyers, T.; Reker, J.; Hilleringmann, U.
Konferenzbeitrag
2018Transient electro-thermal coupled system simulation
Schacht, R.; Rzepka, S.
Konferenzbeitrag
2018Tuning of diameter and electronic type of CCVD grown SWCNTs
Jafarpour, S.M.; Schulz, S.E.; Hermann, S.
Zeitschriftenaufsatz
2018Vertically aligned carbon nanotube films as absorption layers for IR applications
Kini, Mandar; Bonitz, Jens; Müller, Michael; Schulz, Stefan E.; Hermann, Sascha
Konferenzbeitrag
2018Warpage measurement on bonded wafers under thermal load
Tröger, B.; Wünsch, D.; Hildebrandt, M.; Taubert, P.; Gottfried, K.; Fries, T.
Konferenzbeitrag
2018Welcome to the 12th Smart Systems Integration
Otto, T.
Konferenzbeitrag
2018Work function and conductivity of inkjet-printed silver layers: Effect of inks and post-treatments
Mitra, D.; Mitra, K.Y.; Dzhagan, V.; Pillai, N.; Zahn, R.T.; Baumann, R.R.
Zeitschriftenaufsatz
20173D packaging for an implantable hemodynamic control system
Schroeder, T.; Baum, M.; Wuensch, D.; Wiemer, M.; Otto, T.
Zeitschriftenaufsatz, Konferenzbeitrag
20173D packaging technologies for smart medical implants
Schröder, Tim; Wünsch, Dirk; Baum, Mario; Hiller, Karla; Wiemer, Maik; Otto, Thomas; Weidenmüller, Jens; Dogan, Özgü; Utz, Alexander; Görtz, Michael
Konferenzbeitrag
20173D wafer level packaging by using Cu-through silicon vias for thin MEMS accelerometer packages
Hofmann, L.; Schubert, I.; Wuensch, D.; Ecke, R.; Vogel, K.; Gottfried, K.; Reuter, D.; Rennau, M.; Schulz, S.E.; Gessner, T.
Zeitschriftenaufsatz
20173D-wafer level packaging approaches for MEMS by using cu-based high aspect ratio through silicon vias
Hofmann, L.
Dissertation
2017Ab initio study of the trimethylaluminum atomic layer deposition process on carbon nanotubes
Förster, A.; Wagner, C.; Schuster, J.; Friedrich, J.
Zeitschriftenaufsatz
2017Application driven reliability research of next generation for automotive electronics: Challenges and approaches
Rzepka, S.; Otto, A.; Vogel, D.; Dudek, R.
Konferenzbeitrag
2017Approaches for wafer level packaging and heterogeneous system integration for CMOS and MEMS sensors
Dempwolf, Sophia; Hofmann, L.; Bowers, Christopher; Guenther, Daniela; Knechtel, Roy; Schulz, S.E.; Gerbach, Ronny
Konferenzbeitrag
2017Ätzung von Nanostrukturen
Hilleringmann, U.
Aufsatz in Buch
2017Biomedical diagnostics enabled by integrated organic and printed electronics
Ahmadraji, T.; Gonzalez-Macia, L.; Ritvonen, T.; Willert, A.; Ylimaula, S.; Donaghy, D.; Tuurala, S.; Suhonen, M.; Smart, D.; Morrin, A.; Efremov, V.; Baumann, R.R.; Raja, M.; Kemppainen, M.; Killard, A.J.
Zeitschriftenaufsatz
2017Board level reliability assessment of consumer components for automotive use by simulation and sophisticated optical deformation analyses
Dudek, R.; Hildebrand, M.; Rzepka, S.; Beintner, J.; Döring, R.; Scheiter, L.; Seiler, B.; Fries, T.; Ortmann, R.W.
Konferenzbeitrag
2017Challenges of nanostructure-integration in Fabry-Pérot interferometers as alternative to Bragg reflectors: An example for Match 1:1-, eBeam-, and nanoimprint lithography
Helke, C.; Hiller, K.; Erben, J.W.; Reuter, D.; Meinig, M.; Kurth, S.; Nowak, C.; Kleinjans, H.; Otto, T.
Konferenzbeitrag
2017Challenges of the intense pulsed light sintering of inkjet-printed conducting patterns on flexible substrates
Mitra, D.; Baumann, R.R.
Konferenzbeitrag
2017Characterization of epoxy based highly filled die attach materials in microelectronics
Maus, I.; Liebl, C.; Fink, M.; Vu, D.-K.; Hartung, M.; Preu, H.; Jansen, K.M.B.; Michel, B.; Wunderle, B.; Weiss, L.
Konferenzbeitrag
2017Characterization of partial discharge performance of die attach adhesives
Schaller, R.; Strutz, V.; Theuss, H.; Dudek, R.; Rzepka, S.
Zeitschriftenaufsatz, Konferenzbeitrag
2017Complementary field-effect transistors for flexible electronics
Hilleringmann, U.; Vidor, F.F.; Meyers, T.
Konferenzbeitrag
2017A concept for an ice detection system on overhead power lines, theory and practical results
Vagapov, G.; Fedotov, A.; Kurth, S.; Voigt, S.
Konferenzbeitrag
2017Conductivity and microstructure of inkjet printed nanoparticle silver layers processed with intense pulsed light (IPL) sintering on various polymeric substrates
Mitra, D.; Baumann, R.R.
Konferenzbeitrag
2017Control system design for a morphing wing trailing edge
Dimino, I.; Ciminello, M.; Concilio, A.; Gratias, A.; Schueller, M.; Pecora, R.
Konferenzbeitrag
2017Controlling the crack formation in inkjet-printed silver nanoparticle thin-films for high resolution patterning using intense pulsed light treatment
Gokhale, P.; Mitra, D.; Sowade, E.; Mitra, K.Y.; Gomes, H.L.; Ramon, E.; Al-Hamry,A.; Kanoun, O.; Baumann, R.R.
Zeitschriftenaufsatz
2017Correlation between mechanical material properties and stress in 3D-integrated silicon microstructures
Stiebing, M.; Vogel, D.; Steller, W.; Wolf, M.J.; Zschenderlein, U.; Wunderle, B.
Konferenzbeitrag
2017Deposition of ZnO nanoparticles for thin-film transistors by doctor blade process
Reker, J.; Meyers, T.; Vidor, F.F.; Hilleringmann, U.
Konferenzbeitrag
2017Design of a 2D MEMS micromirror with indirect static actuation
Kaupmann, P.; Pinter, S.; Franz, J.; Streiter, R.; Otto, T.
Konferenzbeitrag
2017Detection of mechanical loads in lightweight structures using quantum dots photoluminescence
Moebius, M.; Martin, J.; Hartwig, M.; Baumann, R.R.; Otto, T.
Konferenzbeitrag
2017Development history and current achievements of printed primary batteries
Willert, A.; Baumann, R.R.
Konferenzbeitrag
2017Development of CMOS-compatible materials for thermoelectric and sensor applications in semiconductor industry
Wagner-Reetz, M.; Calvo, J.; Nichenametla, C.K.; Kühnel, K.; Göhler, T.; Schulz, S.; Burkov, A.; Uhlig, B.
Vortrag
2017Development of sensor integration concept for mass production processes
Rost, F.; Arnold, B.; Decker, R.; Bauer, A.; Tsapkolenko, A.; Rzepka, S.; Mehner, J.; Kroll, L.
Konferenzbeitrag
2017Editorial: Special Issue on 3rd International Conference on Engineering and Technology Innovation (ICETI 2014), held in Kenting, Taiwan Oct. 31-Nov 2, 2014
Hsieh, W.H.; Michel, B.
Zeitschriftenaufsatz, Konferenzbeitrag
2017Effective viscoelastic plastic material modeling for faster and reliable calculations
Schindler-Saefkow, F.; Pantou, R.; Keller, J.; Rzepka, S.
Konferenzbeitrag
2017Effects of catalyst configurations and process conditions on the formation of catalyst nanoparticles and growth of single-walled carbon nanotubes
Jafarpour, S.M.; Kini, M.; Schulz, S.E.; Hermann, S.
Zeitschriftenaufsatz
2017Effects of residual stresses on cracking and delamination risks of an avionics MEMS pressure sensor
Auersperg, J.; Auerswald, E.; Collet, C.; Dean, T.; Vogel, D.; Winkler, T.; Rzepka, S.
Konferenzbeitrag
2017Efficient modelling approach for transient coupled electro-thermal simulation on the example of a D2PAK application
Schacht, R.; Rzepka, S.
Konferenzbeitrag
2017Elastic and piezoresistive properties of nickel carbides from first principles
Kelling, J.; Zahn, P.; Schuster, J.; Gemming, S.
Zeitschriftenaufsatz
2017An electromagnetic scanning mirror integrated with blazed grating and angle sensor for a near infrared micro spectrometer
Zhou, Y.; Wen, Q.; Wen, Z.Y.; Huang, J.; Chang, F.
Zeitschriftenaufsatz
2017Electronic transport in metallic carbon nanotubes with mixed defects within the strong localization regime
Teichert, F.; Zienert, A.; Schuster, J.; Schreiber, M.
Zeitschriftenaufsatz
2017Elektrochemische Abscheidung von Aluminium und Palladium aus ionischen Flüssigkeiten für das reaktive Waferbonden
Hertel, S.; Schröder, T.J.; Wünsch, D.; Wiemer, M.; Geßner, T.
Zeitschriftenaufsatz
2017Emerging applications: PICs as a platform for lab on chip devices
Geidel, S.; Otto, T.
Zeitschriftenaufsatz
2017Erweiterung konventioneller Bauelemente durch Nanotechniken
Hilleringmann, U.; Horstmann, J.T.
Aufsatz in Buch
2017Fabrication and operation of kinesin-1-powered biocomputation networks
Meinecke, C.; Korten, Till; Heldt, G.; Reuter, D.; Diez, Stefan
Abstract
2017Fabrication of conductive copper patterns using reactive inkjet printing followed by two-step electroless plating
Chen, J.-J.; Lin, G.-Q.; Wang, Y.; Sowade, E.; Baumann, R.R.; Feng, Z.-S.
Zeitschriftenaufsatz
2017FE analyses and power cycling tests on the thermo-mechanical performance of silver sintered power semiconductors with different interconnection technologies
Dudek, R.; Doering, R.; Otto, A.; Rzepka, S.; Stegmeier, S.; Kiefl, S.; Lunding, A.; Eisele, R.
Konferenzbeitrag
2017Filling of high aspect ratio (HAR) nanometer-scale silicon trenches by electrochemical deposition of nickel
Hofmann, C.; Kurth, F.; Wiemer, M.; Otto, T.; Hiller, K.
Konferenzbeitrag
2017Fluidic actuators for separation control at the engine/wing junction
Schloesser, P.; Meyer, M.; Schueller, M.; Weigel, P.; Bauer, M.
Zeitschriftenaufsatz, Konferenzbeitrag
2017Fraunhofer-Institut für Elektronische Nanosysteme. Jahresbericht 2016
 
Jahresbericht
2017Fully inkjet-printed thin-film transistor array manufactured on paper substrate for cheap electronic applications
Mitra, K.Y.; Polomoshnov, M.; Martinez-Domingo, C.; Mitra, D.; Ramon, E.; Baumann, R.R.
Zeitschriftenaufsatz
2017Go beyond 4.0 - towards digital fabrication based on printing
Willert, A.; Zichner, R.; Thalheim, R.; Baumann, R.R.; Otto, T.
Konferenzbeitrag
2017Halbleitende Nanopartikel für Feldeffekttransistoren
Hilleringmann, U.
Aufsatz in Buch
2017HED-TIE: A wafer-scale approach for fabricating hybrid electronic devices with trench isolated electrodes
Banerjee, S.; Bülz, D.; Solonenko, D.; Reuter, D.; Deibel, C.; Hiller, K.; Zahn, D.R.T.; Salvan, G.
Zeitschriftenaufsatz
2017High-Q whispering gallery microdisk resonators based on silicon oxynitride
Hett, T.; Kraemmer, S.; Hilleringmann, U.; Kalt, H.; Zrenner, A.
Zeitschriftenaufsatz
2017Hocheffiziente Modellierung, Charakterisierung und Analyse von Mixed-Signal Phasenregelkreisen unter Berücksichtigung von nichtlinearen und nicht-idealen Effekten
Hangmann, C.
Dissertation
2017Implantable hemodynamic controlling system with a highly miniaturized two axis acceleration sensor
Baum, Mario; Wünsch, Dirk; Hiller, Karla; Forke, Roman; Schröder, Tim; Weidlich, Sebastian; Hahn, Susann; Reuter, Danny; Wiemer, Maik; Weidenmüller, Jens; Dogan, Özgü; Görtz, Michael; Otto, Thomas
Konferenzbeitrag
2017Implantable multi sensor system for hemodynamic controlling
Weidenmüller, Jens; Dogan, Özgü; Stanitzki, Alexander; Baum, Mario; Schröder, Tim; Wünsch, Dirk; Görtz, Michael; Grabmaier, Anton
Konferenzbeitrag
2017Improved recursive Green's function formalism for quasi one-dimensional systems with realistic defects
Teichert, F.; Zienert, A.; Schuster, J.; Schreiber, M.
Zeitschriftenaufsatz
2017Increase of functional density of hybrid structures by integration of micro and nano systems
Schueller, M.; Otto, T.; Mehner, J.; Troeltzsch, J.; Kroll, L.
Konferenzbeitrag
2017Inductive temperature measurement for fast and optimized adhesive curing
Schröder, D.; Büker, M.-J.; Hedayat, C.; Kleemeier, M.; Lühring, A.
Konferenzbeitrag
2017Influence of processing atmosphere for QD-LEDs
Langenickel, J.; Weiß, A.; Otto, T.
Konferenzbeitrag
2017Inkjet printed metal insulator semiconductor (MIS) diodes for organic and flexible electronic application
Mitra, K.Y.; Sternkiker, C.; Martinez-Domingo, C.; Sowade, E.; Ramon, E.; Carrabina, J.; Gomes, H.L.; Baumann, R.R.
Zeitschriftenaufsatz
2017Inkjet-printed dissolved oxygen and pH sensors on flexible plastic substrates
Moya, A.; Zea, M.; Sowade, E.; Villa, R.; Ramon, E.; Baumann, R.R.; Gabriel, G.
Konferenzbeitrag
2017Integration of self-healing agent into MEMS bonding frames
Kurth, F.; Hofmann, C.; Hertel, S.; Braun, P.; Schroeder, T.J.; Wiemer, M.
Konferenzbeitrag
2017Integration of ZnO nanoparticle transistors on freestanding flexible substrates
Vidor, F.F.; Meyers, T.; Hilleringmann, U.
Konferenzbeitrag
2017Integrationstechnik für ZnO-Nanopartikel-Dünnschichttransistoren
Reker, J.; Meyers, T.; Vidor, F.F.; Hilleringmann, U.
Konferenzbeitrag
2017Investigation on inkjet printing for electromagnetic applications
Hartwig, M.; Polomoshnov, M.; Zichner, R.; Baumann, R.R.
Abstract
2017Investigation on inkjet printing for electromagnetic compatibility application
Hartwig, M.; Polomoshnov, M.; Zichner, R.; Baumann, R.R.
Konferenzbeitrag
2017Investigation on the temperature distribution of integrated heater configurations in a Lab-on-a-Chip system
Streit, P.; Nestler, J.; Schulze, R.; Shaporin, A.; Otto, T.
Konferenzbeitrag
2017Investigations on Parylene C for its integrability into MEMS
Selbmann, F.; Baum, M.; Hecker, C.; Roscher, F.; Enderlein, T.; Wiemer, M.; Joseph, Y.; Otto, T.
Konferenzbeitrag
2017Large-scale fabrication of LP-CVD Si3N4 photonic crystal structures as freestanding reflectors with 1 mm aperture for Fabry-Pérot interferometers
Helke, C.; Hiller, K.; Werner, T.; Reuter, D.; Meinig, M.; Kurth, S.; Nowak, C.; Kleinjans, H.; Otto, T.
Konferenzbeitrag
2017Life cycle engineering and management - fostering the management-orientation of life cycle engineering activities
Götze, U.; Peças, P.; Schmidt, A.; Symmank, C.; Henriques, E.; Ribeiro, I.; Schüller, M.
Zeitschriftenaufsatz, Konferenzbeitrag
2017Lifetime modeling based on anodic oxidation failure for packages with internal galvanic isolation
Schaller, R.; Strutz, V.; Theuss, H.; Dudek, R.; Rzepka, S.
Konferenzbeitrag
2017Light-induced magnetoresistance in solution-processed planar hybrid devices measured under ambient conditions
Banerjee, S.; Bülz, D.; Reuter, D.; Hiller, K.; Zahn, D.R.T.; Salvan, G.
Zeitschriftenaufsatz
2017A low-frequency piezoelectric-electromagnetic-triboelectric hybrid broadband vibration energy harvester
He, X.; Wen, Q.; Sun, Y.; Wen, Z.
Zeitschriftenaufsatz
2017Low-temperature chemical vapor deposition of cobalt oxide thin films from a dicobaltatetrahedrane precursor
Melzer, M.; Nichenametla, Charan K.; Georgi, Colin; Lang, Heinrich; Schulz, S.E.
Zeitschriftenaufsatz
2017Low-voltage DNTT-based thin-film transistors and inverters for flexible electronics
Meyers, T.; Vidor, F.F.; Brassat, K.; Lindner, J.K.N.; Hilleringmann, U.
Zeitschriftenaufsatz
2017Mass production of magnesium silicide as a TEG material
Schoenhoff, M.; Hilleringmann, U.; Boor, J. de
Konferenzbeitrag
2017Material-integrated composite humidity sensors for condition monitoring of fiber-reinforced plastics
Martin, J.; Shetty, K.; Reimann, N.; Neukirchner, S.; Fuegmann, U.; Illing-Günther, H.; Nestler, D.; Huebler, A.C.; Nendel, K.; Kroll, L.; Otto, T.
Konferenzbeitrag
2017Material-integrated composite humidity sensors for condition monitoring of fiber-reinforced plastics
Martin, J.; Shetty, K.; Reimann, N.; Neukirchner, S.; Fügmann, U.; Illing-Günther, H.; Nestler, D.; Hübler, A.C.; Nendel, K.; Kroll, L.; Otto, T.
Zeitschriftenaufsatz
2017Mechanical, electronic and optical properties of strained carbon nanotubes
Wagner, C.F.
Dissertation
2017MEMS-basiertes Schallemissionssensorsystem für die Zustandsüberwachung
Berner, T.; Schulze, R.; Shaporin, A.; Forke, R.; Otto, T.
Konferenzbeitrag
2017Microfluidic setup for on-line SERS monitoring using laser induced nanoparticle spots as SERS active substrate
Buja, Oana-M.; Gordan, Ovidiu D.; Leopold, Nicolae; Morschhauser, A.; Nestler, J.; Zahn, Dietrich R.T.
Zeitschriftenaufsatz
2017Modelling and characterisation of a grease pump-out test stand and its use for accelerated stress testing of thermal greases
Wunderle, B.; Heilmann, J.; May, D.; Arnold, J.; Hirscheider, J.; Bauer, J.; Schacht, R.; Vogel, J.; Ras, M.A.
Konferenzbeitrag
2017Multilayer micromechanics process with thick functional layers (EPyC40)
Louriki, L.; Staffeld, P.; Kaelberer, T.; Otto, T.
Zeitschriftenaufsatz, Konferenzbeitrag
2017Multiparameter and Parallel Optimization of ReaxFF Reactive Force Field for Modeling the Atomic Layer Deposition of Copper
Hu, X.; Schuster, J.; Schulz, S.E.
Zeitschriftenaufsatz
2017Nanophotonic biosensor for space exploration (PBSA instrument)
Pantoja, S.; Parro, V.; Nestler, J.; Geidel, S.; Martins, R.; Cuesta, F.; Elvira, J.G.; Sousa, A.
Konferenzbeitrag
2017Novel concept of integrated micro actuation of membranes in liquid environments
Stiehl, C.; Enderlein, T.; Nestler, J.; Otto, T.
Konferenzbeitrag
2017A novel gyroscopic actuation concept for 2D MEMS micromirrors
Kaupmann, P.; Pinter, S.; Franz, J.; Streiter, R.; Otto, T.
Zeitschriftenaufsatz, Konferenzbeitrag
2017Organic thin-film transistors for AMOLED applications
Meyers, T.; Vollbrecht, J.; Vidor, F.F.; Reker, J.; Kitzerow, H.-S.; Hilleringmann, U.
Konferenzbeitrag
2017Part II of the Special Issue on 3rd International Conference on Engineering and Technology Innovation (ICETI 2014)
Hsieh, W.H.; Michel, B.
Zeitschriftenaufsatz, Konferenzbeitrag
2017Polypropylene-based melt mixed composites with singlewalled carbon nanotubes for thermoelectric applications: Switching from p-type to n-type by the addition of polyethylene glycol
Luo, J.; Cerretti, G.; Krause, B.; Zhang, L.; Otto, T.; Jenschke, W.; Ullrich, M.; Tremel, W.; Voit, B.; Poetschke, P.
Zeitschriftenaufsatz
2017Printing technologies for the manufacturing of passive microwave components: Antennas
Godlinski, Dirk; Zichner, Ralf; Zöllmer, Volker; Baumann, Reinhard R.
Zeitschriftenaufsatz
2017Prozess- und Zustandsüberwachung von Leichtbaustrukturen durch Sensorintegration
Rost, F.; Arnold, B.; Decker, R.; Mehner, J.; Kroll, L.; Rzepka, S.; Otto, T.
Konferenzbeitrag
2017Prüfvorrichtung und Verfahren zur Ermittlung einer Abreißfestigkeit
Roscher, Frank; Vogel, Klaus; Wiemer, Maik; Bräuer, Jörg; Schade, Dirk
Patent
2017Real time solid waste monitoring using cloud and sensors technologies
Likotiko, E.; Petrov, D.; Mwangoka, J.; Hilleringmann, U.
Konferenzbeitrag
2017Reliability characterization of aerosol jet printing technology for multilayer secure envelopes
Lecavelier, A.; Tezenas, A.; Brizoux, M.; Roscher, F.; Saeidi, N.
Konferenzbeitrag
2017Reliability experiments of sintered silver based interconnections by accelerated isothermal bending tests
Heilmann, J.; Nikitin, I.; Zschenderlein, U.; May, D.; Pressel, K.; Wunderle, B.
Zeitschriftenaufsatz, Konferenzbeitrag
2017Reliability investigation on SiC based diode and MOSFET modules developed for high power conversion in medical X-ray applications
Otto, A.; Dudek, R.; Rzepka, S.; Abo Ras, M.; Essen, T. von; Bast, M.; Hindel, A.; Eisele, R.; Mueter, U.; Lunding, A.
Konferenzbeitrag
2017Results of multi-mass high precision vibratory MEMS gyroscopes for two types of system approaches
Popova, I.; Lestev, A.; Fedorov, M.; Rakityansky, O.; Ivanov, V.; Semenov, A.; Forke, R.; Shaporin, A.; Hiller, K.; Koehler, D.; Konietzka, S.
Konferenzbeitrag
2017Robust design optimization: On methodology and short review
Bektas, E.; Broermann, K.; Pecanac, G.; Rzepka, S.; Silber, C.; Wunderle, B.
Konferenzbeitrag
2017Robust vibration Sensor for condition monitoring in railway applications
Pleul, M.; Streit, P.; Polster, K.; Schulze, R.; Schuh, A.; Meinecke, C.; Reuter, D.
Konferenzbeitrag
2017Scalable fabrication of carbon nanotube field-effect transistors (CNT-FETs) implementing wafer-level electron-beam lithography and dielectrophoretic CNT assembly
Blaudeck, T.; Hermann, S.; Hartmann, M.; Böttger, S.; Tittmann-Otto, J.; Heldt, G.; Reuter, D.; Schulz, S.E.
Abstract
2017Selective immobilization of 6HB and Tablet DNA origami Templates on microstructured surfaces by DLC and CF-polymer contrasting suitable for microfluidic integration
Hann, J.; Helke, C.; Fischer, F.; Lakatos, M.; Heerwig, A.; Nestler, J.; Meritg, M.; Gessner, T.
Zeitschriftenaufsatz, Konferenzbeitrag
2017Sens-o-Spheres - A concept for location independent acquisition of process measurement signals
Lüke, T.; Büker, M.-J.; Hedayat, C.; Lenk, F.; Lauterbach, T.; Gernandt, T.; Moll, R.; Buchner, P.
Konferenzbeitrag
2017Sensor components of a miniaturized implant for haemodynamic controlling
Weidenmüller, Jens; Dogan, Özgü; Stanitzki, Alexander; Baum, Mario; Wünsch, Dirk; Wiemer, Maik; Görtz, Michael
Zeitschriftenaufsatz, Konferenzbeitrag
2017Silicon sacrificial layer technology for the production of 3D MEMS (EPyC process)
Louriki, L.; Staffeld, P.; Kaelberer, T.; Otto, T.
Zeitschriftenaufsatz, Konferenzbeitrag
2017Special Issue on 3rd International Conference on Smart Systems Engineering (SmaSys 2015)
Khosla, A.; Furukawa, H.; Michel, B.
Zeitschriftenaufsatz, Konferenzbeitrag
2017Temporary wafer bonding - key technology for MEMS devices
Wuensch, D.; Purwin, L.; Büttner, L.; Martinka, R.; Schubert, I.; Junghans, R.; Baum, M.; Wiemer, M.; Otto, T.
Konferenzbeitrag
2017A test device for in situ TEM investigations on failure behaviour of carbon nanotubes embedded in metals under tensile load
Jöhrmann, N.; Hartmann, S.; Jacob, K.; Bonitz, J.; MacArthur, K.E.; Hermann, S.; Schulz, S.E.; Wunderle, B.
Konferenzbeitrag
2017Thermo-mechanical and mechanical robustness of the INCOBAT smart battery management system
Otto, A.; Rzepka, S.; Döring, R.; Scheiter, L.; Armengaud, E.
Konferenzbeitrag
2017Welcome to the 11th Smart Systems Integration
Otto, T.
Konferenzbeitrag
20163D integration technologies for MEMS
Geßner, T.; Hofmann, L.; Wang, W.-S.; Baum, M.; Seifert, T.; Wiemer, M.; Schulz, S.
Konferenzbeitrag
2016Advanced carriers on legacy CMP tools - an intelligent solution for flexible production environments and R&D labs
Franz, M.; Schubert, I.; Junghans, R.; Martinka, R.; Rudolph, C.; Wachsmuth, H.; Trojan, D.; VanDevender, B.; Wrschka, P.; Gottfried, K.
Konferenzbeitrag
2016Advances and challenges of experimental reliability investigations for lifetime modelling of sintered silver based interconnections
Heilmann, J.; Nikitin, I.; Zschenderlein, U.; May, D.; Pressel, K.; Wunderle, B.
Konferenzbeitrag
2016Advances in Deposition of Main-Group Metal Oxides and Rare-Earth Oxides from Metal Enolates
Lang, H.; Adner, D.; Georgi, C.
Aufsatz in Buch
2016Advances in Deposition of Metals from Metal Enolates
Lang, H.; Adner, D.; Georgi, C.
Aufsatz in Buch
2016Advances in Deposition of Transition-Metal Oxides from Metal Enolates
Lang, H.; Adner, D.; Georgi, C.
Aufsatz in Buch
2016All-inkjet-printed dissolved oxygen sensors on flexible plastic substrates
Moya, A.; Sowade, E.; del Campo, F.J.; Mitra, K.Y.; Ramon, E.; Villa, R.; Baumann, R.R.; Gabriel, G.
Zeitschriftenaufsatz
2016All-inkjet-printed low-pass filters with adjustable cutoff frequency consisting of resistors, inductors and transistors for sensor applications
Castro, H.F.; Correia, V.; Sowade, E.; Mitra, K.Y.; Rocha, J.G.; Baumann, R.R.; Lanceros-Méndez, S.
Zeitschriftenaufsatz
2016All-inkjet-printed thin-film transistors: Manufacturing process reliability by root cause analysis
Sowade, E.; Ramon, E.; Mitra, K.Y.; Martínez-Domingo, C.; Pedró, M.; Pallarès, J.; Loffredo, F.; Villani, F.; Gomes, H.L.; Terés, L.; Baumann, R.R.
Zeitschriftenaufsatz
2016Analyses of thermo-mechanical reliability issues for power modules designed in planar technology
Dudek, R.; Döring, R.; Hildebrandt, M.; Rzepka, S.; Stegmeier, S.; Kiefl, S.; Sommer, V.; Mitic, G.; Weidner, K.
Konferenzbeitrag
2016Application of microcontrollers in solar-powered model gliders with sensor systems
Petrov, D.; Hilleringmann, U.
Konferenzbeitrag
2016Array-type miniature interferometer as the core optical microsystem of an optical coherence tomography device for tissue inspection
Passilly, N.; Perrin, S.; Lullin, J.; Albero, J.; Bargiel, S.; Froehly, L.; Gorecki, C.; Krauter, J.; Osten, W.; Wang, W.-S.; Wiemer, M.
Konferenzbeitrag
2016Atomic layer deposition of ultrathin Cu2O and subsequent reduction to Cu studied by in situ x-ray photoelectron spectroscopy
Dhakal, D.; Assim, K.; Lang, H.; Bruener, P.; Grehl, T.; Georgi, C.; Waechtler, T.; Ecke, R.; Schulz, S.E.; Gessner, T.
Zeitschriftenaufsatz
2016Best practice approaches for stress measurements on thin layer stacks
Auerswald, E.; Vogel, D.; Sebastiani, M.; Lord, J.; Rzepka, S.
Konferenzbeitrag
2016Bis(β-diketonato)-and allyl-(β-diketonato)-palladium(II) complexes: Synthesis, characterization and MOCVD application
Assim, K.; Melzer, M.; Korb, M.; Rüffer, T.; Jakob, A.; Noll, J.; Georgi, C.; Schulz, S.E.; Lang, H.
Zeitschriftenaufsatz
2016Brittle fracture and damage in bond pad stacks - a study of parameter influences in coupled XFEM and delamination simulation of nanoindentation
Albrecht, J.; Auersperg, J.; Reuther, G.M.; Kudella, P.W.; Brueckner, J.; Rzepka, S.; Pufall, R.
Konferenzbeitrag
2016Brittle fracture and damage in bond pad stacks: Novel approaches for simulation-based risk assessment
Reuther, G.M.; Kudella, P.W.; Albrecht, J.; Brueckner, J.; Auersperg, J.; Rzepka, S.; Pufall, R.
Konferenzbeitrag
2016Cavity-enhanced mm-wave spectrometer with integrated SiGe front-end for oxygen concentration measurement
Wecker, J.; Kurth, S.; Mangalgiri, G.; Otto, T.; Gessner, T.; Gaitzsch, M.; Bauch, A.; Nasr, I.; Weigel, R.; Kissinger, D.; Hackner, A.; Prechtel, U.
Konferenzbeitrag
2016Centrifugation of micro particles and self-assembly of nano particles by capillary bridging for 3D thermal interconnects
Hofmann, C.; Baum, M.; Wang, W.-S.; Wiemer, M.
Konferenzbeitrag
2016Ceramic substrate technology for wafer level packaging of MEMS
Ziesche, Steffen; Ihle, Martin; Gabler, Felix; Roscher, Frank
Konferenzbeitrag
2016CF3Br plasma cryo etching of low-k porous dielectric
Clemente, I.; Koehler, N.; Miakonkikh, A.; Zimmermann, S.; Schulz, S.E.; Rudenko, K.
Zeitschriftenaufsatz, Konferenzbeitrag
2016Characterisation of the barrier formation process of self-forming barriers with CuMn, CuTi and CuZr alloys
Franz, M.; Ecke, R.; Kaufmann, C.; Kriz, J.; Schulz, S.E.
Zeitschriftenaufsatz, Konferenzbeitrag
2016Chemical vapor deposition of ruthenium-based layers by a single-source approach
Jeschke, J.; Möckel, S.; Korb, M.; Rüffer, T.; Assim, K.; Melzer, M.; Herwig, G.; Georgi, C.; Schulz, S.E.; Lang, H.
Zeitschriftenaufsatz
2016CNTFET-based RF electronics - State-of-the-art and future prospects
Schröter, M.; Claus, M.; Hermann, S.; Tittman-Otto, J.; Haferlach, M.; Mothes, S.; Schulz, S.
Konferenzbeitrag
2016Comparison of atomistic quantum transport and numerical device simulation for carbon nanotube field-effect transistors
Fuchs, F.; Zienert, A.; Mothes, S.; Claus, M.; Gemming, S.; Schuster, J.
Konferenzbeitrag
2016Competitive impact of nanotube assembly and contact electrodes on the performance of CNT-based FETs
Toader, M.; Hermann, S.; Scharfenberg, L.; Hartmann, M.; Mertig, M.; Schulz, S.E.; Gessner, T.
Zeitschriftenaufsatz
2016Concept for a miniaturized cardiovascular multi sensor implant
Dogan, Özgü; Weidenmüller, Jens; Gembaczka, Pierre; Stanitzki, Alexander; Wünsch, Dirk; Baum, Mario; Wiemer, Maik; Görtz, Michael
Abstract
2016COSIVU - Compact, smart and reliable drive unit for fully electric vehicles
Andersson, D.R.; Brinkfeldt, K.; Nord, S.; Ottosson, J.; Lampic, G.; Gotovac, G.; Zschieschang, O.; Baumgartel, H.; Brusius, M.; Kaulfersch, E.; Hilpert, F.; Otto, A.; Frankeser, S.
Konferenzbeitrag
2016Deposition of parylene C and characterization of its hermeticity for the encapsulation of MEMS and medical devices
Selbmann, F.; Baum, M.; Wiemer, M.; Gessner, T.
Konferenzbeitrag
2016Design and fabrication of a SiC-based power module with double-sided cooling for automotive applications
Brinkfeldt, K.; Ottosson, J.; Neumaier, K.; Zschieschang, O.; Kaulfersch, E.; Edwards, M.; Otto, A.; Andersson, D.
Konferenzbeitrag
2016The design challenge in printing devices and circuits: Influence of the orientation of print patterns in inkjet-printed electronics
Sowade, E.; Polomoshnov, M.; Baumann, R.R.
Zeitschriftenaufsatz
2016Direct integration of field effect transistors as electro mechanical transducer for stress on beam structures
Haas, S.; Hafez, N.; Loebel, K.-U.; Koegel, E.; Ramsbeck, M.; Reuter, D.; Horstmann, J.T.; Gessner, T.
Konferenzbeitrag
2016Effect of cleaning procedures on the electrical properties of carbon nanotube transistors - a statistical study
Tittmann-Otto, J.; Hermann, S.; Kalbacova, J.; Hartmann, M.; Toader, M.; Rodriguez, R.D.; Schulz, S.E.; Zahn, D.R.T.; Gessner, T.
Zeitschriftenaufsatz
2016Effects of residual stresses on cracking and delamination risks of an avionics MEMS pressure sensor
Auersperg, J.; Collet, C.; Dean, T.; Vogel, D.; Winkler, T.
Zeitschriftenaufsatz
2016Efficient design methodology for inductive energy transmission
Büker, M.-J.; Hedayat, C.; Hilleringmann, U.; Geßner, T.
Konferenzbeitrag
2016Electro-thermal-mechanical analyses on stress in silver sintered power modules with different copper interconnection technologies
Dudek, R.; Döring, R.; Hildebrandt, M.; Rzepka, S.; Stegmeier, S.; Kiefl, S.
Konferenzbeitrag
2016Electron transport in defective metallic and semiconducting carbon nanotubes
Teichert, F.; Zienert, A.; Schuster, J.; Schreiber, M.
Abstract
2016Electroplating of neodymium iron alloys
Kurth, F.; Froemel, J.; Tanaka, S.; Esashi, M.; Gessner, T.
Konferenzbeitrag
2016Embedding electrochemical impedance spectroscopy in smart battery management systems using multicore technology
Armengaud, E.; Macher, G.; Groppo, R.; Novaro, M.; Otto, A.; Döring, R.; Schmidt, H.; Kras, B.; Stankiewicz, S.
Konferenzbeitrag
2016Empirical transport model of strained CNT transistors used for sensor applications
Wagner, C.; Schuster, J.; Gessner, T.
Zeitschriftenaufsatz
2016Enhancement of carbon nanotube FET performance via direct synthesis of poly (sodium 4-styrenesulfonate) in the transistor channel
Toader, M.; Schubel, R.; Hartmann, M.; Scharfenberg, L.; Jordan, R.; Mertig, M.; Schulz, S.E.; Gessner, T.; Hermann, S.
Zeitschriftenaufsatz
2016Erarbeitung einer Fertigungstechnologie und Charakterisierungsmethodik für die Herstellung hochsensitiver Vibrationssensoren unter Nutzung des Mikroschweißprozesses
Haubold, M.
Dissertation
2016Event driven modeling and characterization of the second order voltage switched charge pump PLL
Ali, E.; Hangmann, C.; Hedayat, C.; Haddad, F.; Rahajandraibe, W.; Hilleringmann, U.
Zeitschriftenaufsatz
2016Exchange-biased Py/CoO vortex structures: Magnetization reversal, cooling-field dependence, and training
Nissen, D.; Klein, O.; Matthes, P.; Albrecht, M.
Zeitschriftenaufsatz
2016Experimental and computational studies on the role of surface functional groups in the mechanical behavior of interfaces between single-walled carbon nanotubes and metals
Hartmann, S.; Sturm, H.; Blaudeck, T.; Hölck, O.; Hermann, S.; Schulz, S.E.; Gessner, T.; Wunderle, B.
Zeitschriftenaufsatz
2016Exploitation of giant piezoresistivity - CNT sensors fabricated with a wafer-level technology
Böttger, S.; Schulz, S.E.; Hermann, S.
Zeitschriftenaufsatz, Konferenzbeitrag
2016Fabrication of a multilayer spiral coil by selective bonding, debonding and MEMS technologies
Schroeder, T.; Froemel, J.; Tanaka, S.; Gessner, T.
Konferenzbeitrag
2016Fast and trusted intrinsic stress measurement to facilitate improved reliability assessments
Vogel, D.; Auerswald, E.; Gadhiya, G.; Rzepka, S.
Zeitschriftenaufsatz
2016Fluidic actuators for active flow control on airframe
Schueller, M.; Weigel, P.; Lipowski, M.; Meyer, M.; Schlösser, P.; Bauer, M.
Konferenzbeitrag
2016Fraunhofer-Institute for Electronic Nano Systems. Annual Report 2015
 
Jahresbericht
2016High-resolution inkjet printing of conductive carbon nanotube twin lines utilizing evaporation-driven self-assembly
Dinh, Nghia Trong; Sowade, Enrico; Blaudeck, T.; Hermann, S.; Rodriguez, Raul D.; Zahn, Dietrich R.T.; Schulz, S.E.; Baumann, R.R.; Kanoun, Olfa
Zeitschriftenaufsatz
2016A highly miniaturized two-axis acceleration sensor for implantable hemody-namic controlling system
Wünsch, Dirk; Hiller, Karla; Forke, Roman; Baum, Mario; Wiemer, Maik; Geßner, Thomas; Görtz, Michael; Weidenmüller, Jens; Dogan, Özgü
Abstract
2016HOT-300 - a multidisciplinary technology approach targeting microelectronic systems at 300 °C operating temperature
Vogt, Holger; Altmann, Frank; Braun, Sebastian; Celik, Yusuf; Dietrich, Lothar; Dietz, Dorothee; Dijk, Marius van; Dreiner, Stefan; Döring, Ralf; Gabler, Felix; Goehlich, Andreas; Hutter, Matthias; Ihle, Martin; Kappert, Holger; Kordas, Norbert; Kokozinski, Rainer; Naumann, Falk; Nowak, Torsten; Oppermann, Hermann; Partsch, Uwe; Petzold, Matthias; Roscher, Frank; Rzepka, Sven; Schubert, Ralph; Weber, Constanze; Wiemer, Maik; Wittler, Olaf; Ziesche, Steffen
Konferenzbeitrag
2016Improved RF design using precise 3D near-field measurements and near-field to far-field transformations
Hangmann, C.; Mager, T.; Khan, S.; Hedayat, C.; Hilleringmann, U.
Konferenzbeitrag
2016An in situ tensile test device for thermo-mechanical characterisation of interfaces between carbon nanotubes and metals
Hartmann, S.; Bonitz, J.; Heggen, M.; Hermann, S.; Hölck, O.; Schulz, S.E.; Gessner, T.; Wunderle, B.
Konferenzbeitrag
2016An in-situ numerical-experimental approach for fatigue delamination characterization in microelectronic packages
Poshtan, E.A.; Rzepka, S.; Silber, C.; Wunderle, B.
Zeitschriftenaufsatz
2016Integration of an optical ring resonator biosensor into a self-contained microfluidic cartridge with active, single-shot micropumps
Geidel, S.; Peransi Llopis, S.; Rodrigo, M.; Diego-Castilla, G. de; Sousa, A.; Nestler, J.; Otto, T.; Gessner, T.; Parro, V.
Zeitschriftenaufsatz
2016Integration of humidity sensors into fibre-reinforced thermoplastic composites
Ebert, F.; Seider, T.; Illing-Günther, H.; Nendel, K.; Martin, J.; Otto, T.; Gessner, T.; Nestler, D.; Wagner, G.
Zeitschriftenaufsatz, Konferenzbeitrag
2016Intense pulsed light sintering of an inkjet printed silver nanoparticle ink depending on the spectral absorption and reflection of the background
Mitra, D.; Mitra, K.Y.; Hartwig, M.; Baumann, R.R.
Zeitschriftenaufsatz
2016Intrinsic stress measurement by FIB ion milling becomes an industrial-strength method
Vogel, D.; Auerswald, E.; Gadhiya, G.; Auersperg, J.; Sebastiani, M.; Rzepka, S.
Konferenzbeitrag
2016Investigating fracture strength of poly-silicon membranes using microscopic loading tests and numerical simulation
Brueckner, J.; Dehé, A.; Auerswald, E.; Dudek, R.; Vogel, D.; Michel, B.; Rzepka, S.
Zeitschriftenaufsatz
2016Investigation of surface pre-treatment methods for wafer-level Cu-Cu thermo-compression bonding
Tanaka, K.; Wang, W.-S.; Baum, M.; Froemel, J.; Hirano, H.; Tanaka, S.; Wiemer, M.; Otto, T.
Zeitschriftenaufsatz
2016Length separation of single-walled carbon nanotubes and its impact on structural and electrical properties of wafer-level fabricated carbon nanotube-field-effect transistors
Böttger, S.; Hermann, S.; Schulz, S.E.; Gessner, T.
Zeitschriftenaufsatz
2016Light electric vehicle enabled by smart systems integration
John, R.; Kahrimanovic, E.; Otto, A.; Tavernini, D.; Camocardi, M.; Perelli, P.; Dalmasso, D.; Blaz, S.; Trojaniello, D.; Oleari, E.; Sanna, A.; Groppo, R.; Romano, C.
Konferenzbeitrag
2016Liquid reagent storage in self-pumping lab-on-a-chip systems for quick assay and biosensor integration
Nestler, J.; Haber, N.; Stiehl, C.; Otto, T.; Gessner, T.
Konferenzbeitrag
2016Low temperature layer purification by pulsed UV-irradiation for flexible dye sensitized solar cells
Kleine, A.; Hilleringmann, U.
Konferenzbeitrag
2016Low temperature thermo compression bonding with printed intermediate bonding layers
Wiemer, M.; Roscher, F.; Seifert, T.; Vogel, K.; Ogashiwa, T.; Gessner, T.
Konferenzbeitrag
2016Low-cost treatment for flexible electronics
Vidor, F.F.; Meyers, T.; Hilleringmann, U.
Konferenzbeitrag
2016Magnesium silicide TEGs as self-sufficient power supply for smart systems
Schönhoff, M.; Assion, F.; Hilleringmann, U.
Konferenzbeitrag
2016Manganese half-sandwich complexes as metal-organic chemical vapor deposition precursors for manganese-based thin films
Assim, K.; Jeschke, J.; Jakob, A.; Dhakal, D.; Melzer, M.; Georgi, C.; Schulz, S.E.; Gessner, T.; Lang, H.
Zeitschriftenaufsatz
2016Maskless reduction of crosstalk suitable for flexible electronics
Meyers, T.; Vidor, F.F.; Hilleringmann, U.
Konferenzbeitrag
2016Master curve synthesis by effective viscoelastic plastic material modeling
Schindler-Saefkow, F.; Pantou, R.; Schlottig, G.; Kumar, S.; Brunschwiler, T.; Keller, J.; Wunderle, B.; Rzepka, S.
Konferenzbeitrag
2016Materials and technologies to enable high temperature stable MEMS and electronics for smart systems used in harsh environments
Gabler, Felix; Roscher, Frank; Döring, Ralf; Otto, Alexander; Ziesche, Steffen; Ihle, Martin; Celik, Yusuf; Dietz, Dorothee; Goehlich, Andreas; Kappert, Holger; Vogt, Holger; Naumann, Falk; Geßner, Thomas
Konferenzbeitrag
2016Measurement and modeling of the effective thermal conductivity of sintered silver pastes
Ordonez-Miranda, J.; Hermens, M.; Nikitin, I.; Kouznetsova, V.G.; Der Sluis, O. van; Ras, M.A.; Reparaz, J.S.; Wagner, M.R.; Sledzinska, M.; Gomis-Bresco, J.; Sotomayor Torres, C.M.; Wunderle, B.; Volz, S.
Zeitschriftenaufsatz
2016Mechanical in-situ characterization of micro systems during encapsulation and integration processes in structural components
Rost, F.; Arnold, B.; Vogel, D.; Michel, B.; Rzepka, S.
Konferenzbeitrag
2016A MEMS test stage for in situ testing of interfaces between carbon nanotubes and metals
Hartmann, S.; Hermann, S.; Bonitz, J.; Heggen, M.; Schulz, S.E.; Gessner, T.; Wunderle, B.
Konferenzbeitrag
2016MEMS tunable Fabry-Pérot filters for infrared microspectrometer applications
Neumann, N.; Ebermann, M.; Hiller, K.; Seifert, M.; Meinig, M.; Kurth, S.
Konferenzbeitrag
2016Metal nanoparticles reveal the organization of single-walled carbon nanotubes in bundles
Rodriguez, R.D.; Blaudeck, T.; Kalbacova, J.; Sheremet, E.; Schulze, S.; Adner, D.; Hermann, S.; Hietschold, M.; Lang, H.; Schulz, S.E.; Zahn, D.R.T.
Zeitschriftenaufsatz
2016Microelectromechanical switch and method for manufacturing the same
Kurth, Steffen; Voigt, Sven; Haas, Sven; Ikeda, Koichi; Akiba, Akira
Patent
2016Microelectromechanical system and method for manufacturing the same
Kurth, Steffen; Voigt, Sven; Haas, Sven; Ikeda, Koichi; Akiba, Akira
Patent
2016Microwave filter design optimized for ceramic multilayer technique
Uhlig, P.; Kassner, J.; Guenner, C.; Noack, E.
Zeitschriftenaufsatz, Konferenzbeitrag
2016Miniaturized vortex-induced vibration energy harvester for low velocity air flow application
Wen, Q.; Schulze, R.; Billep, D.; Otto, T.; Geßner, T.
Konferenzbeitrag
2016Modeling of MOEMS electromagnetic scanning grating mirror for NIR micro-spectrometer
Zhou, Y.; Wen, Q.; Wen, Z.; Yang, T.
Zeitschriftenaufsatz
2016A new approach for 3D Integration based on printed multilayers and through polymer vias
Roscher, F.; Saeidi, N.; Enderlein, T.; Selbmann, F.; Wiemer, M.; Gessner, T.
Konferenzbeitrag
2016Next generation drivetrain concept featuring self-learning capabilities enabled by extended information technology functionalities
Otto, A.; Rzepka, S.
Konferenzbeitrag
2016Novel test stand for thermal diffusivity measurement of bulk and thin films
Ras, M.A.; May, D.; Wunderle, B.
Konferenzbeitrag
2016Novel through silicon wiring technology using dry etched sloping vertical terminals
Haas, S.; Voigt, S.; Arnold, M.; Schwenzer, F.; Braunschweig, M.; Küchler, M.; Kurth, S.; Gessner, T.
Konferenzbeitrag
2016Optimization of a zinc oxide dispersion for building Quantum Dot Light Emitting Diodes
Langenickel, J.; Weiß, A.; Martin, J.; Otto, T.; Gessner, T.
Konferenzbeitrag
2016Oxygen detection system consisting of a millimeter wave Fabry-Pérot resonator and an integrated SiGe front-end
Wecker, J.; Bauch, A.; Kurth, S.; Mangalgiri, G.; Gaitzsch, M.; Meinig, M.; Gessner, T.; Nasr, I.; Weigel, R.; Kissinger, D.; Hackner, A.; Prechtel, U.
Konferenzbeitrag
2016Parylene C Deposition and Characterization of its Barrier Properties for the Encapsulation of MEMS for Medical Applications
Selbmann, F.; Baum, M.; Wiemer, M.; Gessner, T.
Konferenzbeitrag
2016Piezoelektrische Aluminiumnitrid-Dünnschichten für mikroelektromechanische Systeme
Stöckel, C.
Dissertation
2016A plasma assisted in situ restoration process for sidewall damaged ULK dielectrics
Koehler, N.; Fischer, T.; Zimmermann, S.; Schulz, S.E.
Zeitschriftenaufsatz
2016Printed batteries designed to power OLED applications
Willert, A.; Helmert, M.; Baumann, R.R.
Konferenzbeitrag
2016Processing-structure-property correlations of sintered silver
Ras, M.A.; May, D.; Heilmann, J.; Rzepka, S.; Michel, B.; Wunderle, B.
Konferenzbeitrag
2016Product data and Sensor-based intelligent drive Control for flexible manufacturing and intralogistic processes
Geneiß, V.; Hedayat, C.; Bertelsmeier, F.; Henke, C.; Vathauer, K.-E.; Geßner, T.
Konferenzbeitrag
2016Re-building the underfill: Performance of percolating fillers at package scale
Zschenderlein, U.; Baum, M.; Schlottig, G.; Schindler-Saefkow, F.; Kumar, S.G.; Wang, W.-S.; Brunschwiler, T.; Wunderle, B.
Konferenzbeitrag
2016Reliability assessment of a smart and compact inverter developed for electrically powered construction vehicles
Otto, A.; Gadhiya, G.; Rzepka, S.; Kaulfersch, E.; Hilpert, F.; Brabandt, I.
Konferenzbeitrag
2016Reliability assessment of PCB for smart secure applications
Kaulfersch, E.; Albrecht, J.; Rzepka, S.; Michel, B.
Konferenzbeitrag
2016Reliability investigation on SiC BJT power module
Otto, A.; Kaulfersch, E.; Frankeser, S.; Brinkfeldt, K.; Zschieschang, O.; Rzepka, S.
Konferenzbeitrag
2016Review of percolating and neck-based underfills with thermal conductivities up to 3 W/m-K
Brunschwiler, T.; Zürcher, J.; Zimmermann, S.; Burg, B.R.; Schlottig, G.; Chen, X.; Sinha, T.; Baum, M.; Hofmann, C.; Pantou, R.; Achen, A.; Zschenderlein, U.; Kumar, S.; Wunderle, B.; Haupt, M.; Schindler-Saefkow, F.; Strässle, R.
Konferenzbeitrag
2016Risk assessment of bond pad stacks: Combined utilization of nanoindentation and FE-modeling
Albrecht, J.; Reuther, G.M.; Brueckner, J.; Auersperg, J.; Rzepka, S.; Pufall, R.
Konferenzbeitrag
2016Self-assembly of spherical colloidal photonic crystals inside inkjet-printed droplets
Sowade, E.; Blaudeck, T.; Baumann, RR.
Zeitschriftenaufsatz
2016Silicon oxynitride microdisk resonators for integrated waveguide coupling
Hett, T.; Frers, T.; Widhalm, A.; Berth, G.; Hilleringmann, U.; Zrenner, A.
Konferenzbeitrag
2016Sprödbruchrisiko an keramischen Bauelementen in Abhängigkeit vom Hochtemperatur-Lotwerkstoff und der Beanspruchungsgeschwindigkeit
Dudek, Rainer; Hildebrandt, Marcus; Rzepka, Sven; Röllig, Mike; Trodler, Jörg
Konferenzbeitrag
2016Stress analysis in semiconductor devices by Kelvin probe force microscopy
Sheremet, E.; Fuchs, F.; Paul, S.; Haas, S.; Vogel, D.; Rodriguez, P.; Zienert, A.; Schuster, J.; Reuter, D.; Gessner, T.; Zahn, D.; Hietschold, M.
Abstract
2016Stress investigations in 3D-integrated silicon microstructures
Stiebing, M.; Lörtscher, E.; Steller, W.; Vogel, D.; Wolf, M.J.; Brunschwiler, T.; Wunderle, B.
Konferenzbeitrag
2016Structure and thermoelectric properties of PbTe films deposited by thermal evaporation method
Nguyen, M.P.; Froemel, J.; Hatayama, S.; Sutou, Y.; Koike, J.; Tanaka, S.; Esashi, M.; Gessner, T.
Konferenzbeitrag
2016Study on TSV isolation liners for a Via Last approach with the use in 3D-WLP for MEMS
Hofmann, L.; Fischer, T.; Werner, T.; Selbmann, F.; Rennau, M.; Ecke, R.; Schulz, S.E.; Gessner, T.
Zeitschriftenaufsatz
2016Sub-micrometer warpage measurement setups for the verification of material models of soft solder die attaches by inverse modeling
Niessner, M.; Dudek, R.; Hildebrandt, M.; Gehring, M.; Yongbo, Y.; Piller, A.; Schrag, G.
Konferenzbeitrag
2016Theoretical investigation of in situ k-restore processes for damaged ultra-low-k dielectrics
Förster, A.; Wagner, C.; Schuster, J.; Gemming, S.
Zeitschriftenaufsatz, Konferenzbeitrag
2016Thermal design of integrated heating for lab-on-a-chip systems
Streit, P.; Nestler, J.; Shaporin, A.; Schulze, R.; Gessner, T.
Konferenzbeitrag
2016Thermal simulations and experimental verification of power modules designed for double sided cooling
Brinkfeldt, K.; Ottosson, J.; Otto, A.; Mann, A.; Zschieschang, O.; Frankeser, S.; Andersson, D.
Konferenzbeitrag
2016Time-efficient curing of printed dielectrics via infra-red suitable to S2S and R2R manufacturing platforms for electronic devices
Mitra, K.Y.; Weise, D.; Hartwig, M.; Kapadia, S.; Baumann, R.R.
Zeitschriftenaufsatz
2016Towards distributed intelligent sensor and information fusion
Mönks, U.; Trsek, H.; Dürkop, L.; Geneiß, V.; Lohweg, V.
Zeitschriftenaufsatz
2016Towards nanoreliability of sensors incorporating interfaces between single-walled carbon nanotubes and metals: Molecular dynamics simulations and in situ experiments using electron microscopy
Hartmann, S.; Hermann, S.; Bonitz, J.; Heggen, M.; Hölck, O.; Shaporin, A.; Mehner, J.; Schulz, S.E.; Gessner, T.; Wunderle, B.
Zeitschriftenaufsatz
2016Tunable Fabry-Pérot interferometer with subwavelength grating reflectors for MWIR microspectrometers
Meinig, M.; Kurth, S.; Seifert, M.; Hiller, K.; Wecker, J.; Ebermann, M.; Neumann, N.; Gessner, T.
Konferenzbeitrag
2016Tunable MEMS Fabry-Pérot filters for infrared microspectrometers: A review
Ebermann, M.; Neumann, N.; Hiller, K.; Seifert, M.; Meinig, M.; Kurth, S.
Konferenzbeitrag
2016Tuning the reduction and conductivity of solution-processed graphene oxide by intense pulsed light
Al-Hamry, A.; Kang, H.; Sowade, E.; Dzhagan, V.; Rodriguez, R.D.; Müller, C.; Zahn, D.R.T.; Baumann, R.R.; Kanoun, O.
Zeitschriftenaufsatz
2016Up-scaling of the manufacturing of all-inkjet-printed organic thin-film transistors: Device performance and manufacturing yield of transistor arrays
Sowade, E.; Mitra, K.Y.; Ramon, E.; Martinez-Domingo, C.; Villani, F.; Loffredo, F.; Gomes, H.L.; Baumann, R.R.
Zeitschriftenaufsatz
2016Upscaling of the inkjet printing process for the manufacturing of passive electronic devices
Sternkiker, C.; Sowade, E.; Mitra, K.Y.; Zichner, R.; Baumann, R.R.
Zeitschriftenaufsatz
2016Using quantum dot photoluminescence for load detection
Moebius, M.; Martin, J.; Hartwig, M.; Baumann, R.R.; Otto, T.; Gessner, T.
Zeitschriftenaufsatz
2016Vertical integration of array-type miniature interferometers at wafer level by using multistack anodic bonding
Wang, W.-S.; Wiemer, M.; Froemel, J.; Enderlein, T.; Gessner, T.; Lullin, J.; Bargiel, S.; Passilly, N.; Albero, J.; Gorecki, C.
Konferenzbeitrag
2016VIS Fabry-Pérot-Interferometer with (HL)4 PE-Si3N4/PE-SiO2 reflectors on freestanding LP-Si3N4 membranes for surface enhanced Raman spectroscopy
Helke, C.; Meinig, M.; Seifert, M.; Seiler, J.; Hiller, K.; Kurth, S.; Martin, J.; Gessner, T.
Konferenzbeitrag
2016Wafer-level technology for integration of carbon nanotubes into micro-electro-mechanical systems
Bonitz, J.; Böttger, S.; Herrmann, S.; Schulz, S.E.; Gessner, T.; Hartmann, S.; Wunderle, B.
Konferenzbeitrag
2016Welcome to smart systems integration 2016
Gessner, T.
Konferenzbeitrag