Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2022Performance of similitude methods for structural vibration analyses of rectangular plates
Adams, C.; Bös, J.; Melz, T.
Journal Article
2021"Gut-Wetter-Machen" im Labor
Wanner, Matthias; Oehler, Harald; Alig, Ingo
Journal Article
2021Analysis and Design of a Leading Edge with Morphing Capabilities for the Wing of a Regional Aircraft - Gapless Chord- and Camber-Increase for High-Lift Performance
Contell Asins, Conchin; Landersheim, Volker; Laveuve, Dominik; Adachi, Seiji; May, Michael; Wacker, Jens David; Decker, Julia
Journal Article
2021Analysis of the molecular heterogeneity of poly(lactic acid)/poly(butylene succinate-co-adipate) blends by hyphenating size exclusion chromatography with nuclear magnetic resonance and infrared spectroscopy
Malz, Frank; Arndt, Jan-Hendrik; Balko, Jens; Barton, Bastian; Büsse, Thomas; Imhof, Dennis; Pfaendner, Rudolf; Rode, Karsten; Brüll, Robert
Journal Article
2021Ansatz zur methodischen Analyse und Absicherung des Funktionalkonzepts voll automatisierter Kraftfahrzeuge
Rauschenbach, Matthias; Kupjetz, Simon Matthias; Wolschke, Christian; Braun, Tobias
Conference Paper
2021Artificial weathering and accelerated heat aging studies on low-density polyethylene (LDPE) produced via autoclave and tubular process technologies
Luyt, Adriaan Stephanus; Gasmi, Soumia Abderrazak; Malik, Sarah Shahid; Aljindi, R.M.; Ouederni, M.; Vouyiouka, S.N.; Porfyris, A.D.; Pfaendner, Rudolf; Papaspyrides, C.D.
Journal Article
2021Assessment of Model Uncertainty in the Prediction of the Vibroacoustic Behavior of a Rectangular Plate by Means of Bayesian Inference
Kleinfeller, N.; Gehb, C.M.; Schaeffner, M.; Adams, C.; Melz, T.
Conference Paper
2021Assessment of service loads and material influence on the lifetime of thick-walled nodular cast iron components
Bleicher, C.; Kaufmann, H.; Melz, T.
Journal Article
2021Eine Auslegungsmethode für direkt einlaminierte Dichthülsen in elektrischen Antriebsmaschinen
Hübsch, Jan David
Dissertation
2021Ein Beitrag zur parametrischen Modellbildung strukturdynamischer Systeme entlang der Produktlebensphasen
Tamm, Christoph
Dissertation
2021Bird strike resistance of a CFRP morphing leading edge
May, Michael; Arnold-Keifer, Sonja; Landersheim, Volker; Laveuve, Dominik; Contell Asins, Conchin; Imbert, Mathieu
Journal Article
2021Chemical Recycling of Post-Consumer PLA Waste for Sustainable Production of Ethyl Lactate
Majgaonkar, Pranav; Hanich, Ronny; Malz, Frank; Brüll, Robert
Journal Article
2021Consideration of the transient material behavior under variable amplitude loading in the fatigue assessment of nodular cast iron using the strain-life approach
Hesseler, J.; Baumgartner, J.; Bleicher, C.
Journal Article
2021Damage tolerant design of additively manufactured metallic components subjected to cyclic loading: State of the art and challenges
Zerbst, U.; Bruno, G.; Buffière, J.-Y.; Wegener, T.; Niendorf, T.; Wu, T.; Zhang, X.; Kashaev, N.; Meneghetti, G.; Hrabe, N.; Madia, M.; Werner, T.; Hilgenberg, K.; Koukolíková, M.; Procházka, R.; Džugan, J.; Möller, B.; Beretta, S.; Evans, A.; Wagener, R.; Schnabel, K.
Journal Article
2021Design of a composite nose wheel for commercial aircraft
Wacker, Jens David; Laveuve, Dominik; Contell Asins, Conchin; Büter, Andreas
Conference Paper
2021Design of a morphing leading edge as a high lift device for a regional aircraft
Contell Asins, Conchin; Landersheim, V.; Wacker, J.-D.; Adachi, S.; Arnold-Keifer, Sonja; May, Michael
Conference Paper
2021Development of a validated design methodology for hollow rotor shafts of wind turbines made of EN GJS 400 18 LT
Niewiadomski, Jan; Kirsch, Julian
Conference Paper
2021Development of value‐added polyethylene grades with extended service lifetime: Weathering resistant flame retarded materials for outdoor applications
Porfyris, A.D.; Vouyiouka, S.N.; Luyt, Adriaan Stephanus; Korres, Dimitrios; Malik, Sarah Shahid; Gasmi, Soumia Abderrazak; Großhauser, Michael; Pfaendner, Rudolf; Papaspyrides, Constantine D.
Journal Article
2021Effizienzsteigerung in der Erprobung durch das strategische Validieren von Annahmen
Mischko, J.-F.; Einbock, S.; Wagener, R.
Conference Paper
2021Einflüsse auf die Betriebsfestigkeit von Schmiedebauteilen
Wagener, Rainer; Hell, Matthias
Report
2021Emissions and Total Cost of Ownership Assessment of Hybrid Propulsion Concepts for Bus Transport with CNG or Diesel Engine
Landersheim, Volker; Tran, Dai-Duong; Pham, Thinh; Manushyna, Daria; Geury, Thomas; Wilkins, Steven; Hegazy, Omar
Conference Paper
2021Enhancing the UV/heat stability of LLDPE irrigation pipes via different stabilizer formulations
Porfyris, A.D.; Luyt, Adriaan Stephanus; Gasmi, Soumia Abderrazak; Malik, Sarah Shahid; Aljindi, R.M.; Ouederni, M.; Vouyiouka, S.N.; Pfaendner, Rudolf; Papaspyrides, Constantine D.
Journal Article
2021Entwicklungsbegleitende domänenübergreifende Zuverlässigkeitsanalyse von Einzelkomponenten bis hin zum Gesamtsystem am Beispiel einer Lithium-Ionen-Batteriezelle
Kupjetz, Simon; Pfeiffer, Thomas; Holz, Johannes
Conference Paper
2021Evaluation of the damaging effect of crop protection formulations on high density polyethylene using the Full Notch Creep Test
Thuy, M.; Niebergall, U.; Oehler, H.; Alig, I.; Böhning, M.
Journal Article
2021Extraction of stabilizers from polymers: Separation of oligomeric hindered amine light stabilizers and phenolic antioxidants from polyolefins using liquid chromatography and high-temperature solid-phase extraction
Kot, David; Arndt, Jan-Hendrik; Macko, Tibor; Brüll, Robert
Journal Article
2021Fatigue assessment of a welded automotive differential under multiaxial and variable amplitude loading
Baumgartner, J.; Waterkotte, R.; Hesseler, J.
Journal Article
2021Fatigue assessment of additively manufactured AlSi10Mg structures using effective stress concepts based on the critical distance approach
Schnabel, K.; Baumgartner, J.; Möller, B.; Scurria, M.
Journal Article
2021Fatigue assessment of laser beam and friction stir welded joints made of aluminium
Mucci, G.; Bernhard, J.; Baumgartner, J.; Frendo, F.
Journal Article
2021Fatigue Behaviour of Additively Manufactured Structures
Wagener, Rainer; Scurria, Matilde; Kaufmann, Heinz
Conference Paper
2021Flame Retardancy of Thermoplastic Foams from Biopolymers
Schmidt, Robert; Höhne, Carl-Christoph; Berner, Valeria; Hallstein, Jannik; Metzsch-Zilligen, Elke; Pfaendner, Rudolf; Mack, Christoph
Poster
2021Flammhemmendes Polymer umfassend phosphorhaltiger Wiederholungseinheiten, Kunststoffzusammensetzung umfassend das flammhemmende Polymer, Verfahren zur Herstellung des flammhemmenden Polymers sowie dessen Verwendung
Sag, Jacob; Schönberger, Frank; Döring, Manfred; Roch, Hendrik; Kabasci, Stephan
Patent
2021Forderung der Bauteilqualität für einen Betriebsfesten Einsatz von gegossenen Aluminiumrädern durch die RFS-Methode
Sonsino, Cetin Morris; Breitenberger, Marco; Krause, Ivo; Pötter, Kurt; Schröder, Sven; Jürgens, Klaus
Conference Paper
2021Forward vs. Bayesian Inference Parameter Calibration: Two Approaches for Non-deterministic Parameter Calibration of a Beam-Column Model
Schaeffner, M.; Gehb, C.M.; Feldmann, R.; Melz, T.
Conference Paper
2021General Forms of Isotropic Limit Surface
Altenbach, H.; Kolupaev, Vladimir
Conference Paper
2021Guideline. Fertigung betriebsfester Bauteile mittels PBF-LB/M Verfahren
: Melz, Tobias
Report
2021High silicon nodular cast iron for lightweight optimized cast components
Bleicher, C.; Kansy, A.; Kaufmann, H.
Conference Paper
2021How to Predict the Product Reliability Confidently and Fast with a Minimum Number of Samples in the Wöhler Test
Mischko, J.; Einbock, S.; Wagener, R.
Conference Paper
2021InCeight Casting C(hoch)8 2021
: Bleicher, Christoph
Conference Proceedings
2021Influence of the chill casting process on the cyclic material behavior of nodular cast iron
Niewiadomski, J.; Bleicher, C.; Kaufmann, H.
Conference Paper
2021Innovative Konzepte zur Zuverlässigkeitsbetrachtung von Hardware- und Software-Komponenten von Beatmungsgeräten
Meyer, M.; Nuffer, J.; Pfeiffer, T.; Rauschenbach, M.; Holz, J.
Conference Paper
2021Integral treatment of butt joints for the fatigue life assessment in the low cycle fatigue regime
Möller, B.
Journal Article
2021Intrinsic flame retardancy of poly(lactic acid) bead foams
Höhne, Carl-Christoph; Schmidt, Robert; Berner, Valeria; Metzsch-Zilligen, Elke; Westphal, Erik; Pfaendner, Rudolf; Mack, Christoph
Journal Article
2021Investigation of biogenic materials and ferroelectrets for energy harvesting on vibrating aircraft structures
Holzmann, H.; Weber, M.; Park, Y.J.; Perfetto, S.; Atzrodt, H.; Dafnis, A.
Journal Article
2021Korrosionseinfluss durch biogene Ottokraftstoffe auf die Lebensdauer zyklisch hochbelasteter Motorkomponenten aus hochlegiertem Chromstahl
Käfer, Sven Eric
Dissertation
2021Linking information from non-destructive testing and casting process simulation of components made of nodular cast iron with the cyclic, strain-based material behavior influenced by dross
Erz, C.; Bleicher, C.; Kaufmann, H.; Hepp, E.
Conference Paper
2021Mechanistic evaluation of flame retardants during UL94 standard testing via IR-camera
Spieß, Bianca; Metzsch-Zilligen, Elke; Pfaendner, Rudolf
Journal Article
2021Messkopf zur zerstörungsfreien Prüfung eines Gegenstandes, Messsystem und Verfahrens zur Prüfung von Schweißnähten an Faserverbundwerkstoffen
Brandt, Jonas Martin; Gerhardt, Matthias; Bartel, Torsten; Park, Ye Ji
Patent
2021Methode zur Zuverlässigkeitsgestaltung von Schneid-Klemmverbindungen
Haouel, Marouane
Dissertation
2021Mit smarten Systemen flexibel in die Zukunft
 
Report
2021Mode of dipentaerythritol stabilization during thermo-oxidative aging of glass fibre reinforced PA66
Klump, Katja; Tenzer, Dominik; Pfaendner, Rudolf; Schönberger, Frank
Journal Article
2021Modelling of Pore Collapse during Polymer Sintering: Viscoelastic Model with Enclosed Gas
Wohlgemuth, Florian; Lellinger, Dirk; Alig, Ingo
Journal Article
2021N-phosphorylated Iminophosphoranes based on 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide and their flame-retardant behavior in epoxy resins
Weinert, Michael; Döring, Manfred
Journal Article
2021Nachhaltige Bauteile aus PET-Flakes
Schönberger, Frank; Khare, Shilpa; Harmia, Tapio
Journal Article
2021A New Class of Oxyimides: Oxyimide Ethers and their Use as Flame Retardants
Spieß, Bianca; Metzsch-Zilligen, Elke; Pfaendner, Rudolf
Journal Article
2021Oligomer oder Polymer, Zusammensetzung, Verwendung des Oligomers oder Polymers sowie Intermediat
Olschewski, Markus; Metzsch-Zilligen, Elke; Pfaendner, Rudolf
Patent
2021Optimierung von Hybridverbindungen
 
Journal Article
2021Origin and effects of casting skins on the fatigue strength of nodular cast iron components
Kutz, Adalbert; Bührig-Polaczek, Andreas; Boettcher, Martin; Bleicher, Christoph; Melz, Tobias
Conference Paper
2021A phenomenological criterion for an optical assessment of PE-HD fracture surfaces obtained from FNCT
Schilling, Markus; Niebergall, Ute; Marschall, Niklas; Alig, Ingo; Böhning, Martin
Journal Article
2021Phosphorhaltige Celluloseester, Verfahren zu ihrer Herstellung, Verwendung und Flammschutzmittel
Ciesielski, Michael; Chalwatzis, Elias; Nezami, Robin
Patent
2021Prevention of the formation of respirable fibers in carbon fiber reinforced epoxy resins during combustion by phosphorus or silicon containing flame retardants
Greiner, L.; Döring, M.; Eibl, S.
Journal Article
2021Required Fatigue Strength (RFS) for evaluating of spectrum loaded components by the example of cast-aluminium passenger car wheels
Sonsino, Cetin Morris; Breitenberger, Marco; Krause, Ivo; Pötter, Kurt; Schröder, Sven; Jürgens, Klaus
Journal Article
2021Review of and a new approach to elastic modulus evaluation for fatigue design of metallic components
Maciolek, A.; Wagener, R.; Melz, T.
Journal Article
2021Schwingfestigkeit hybrid gefügter Materialverbindungen
Baumgartner, Jörg
Journal Article
2021Separation of ethylene-norbornene copolymers using high performance liquid chromatography
Deshmukh, Subrajeet; Macko, Tibor; Arndt, Jan-Hendrik; Malz, Frank; Doremaele, Gerard van; Bernardo, Raffaele; Brüll, Robert
Journal Article
2021Simulation von Sorption und mechanischen Spannungen in Thermoplasten unter Verwendung von Wetterdaten und Bewitterungsprotokollen
Neumann, Alexander; Lellinger, Dirk; Bülow, Andreas; Oehler, Harald; Alig, Ingo
Conference Paper
2021Solubility of Polyethylene in n‑Hexane and Cyclohexane: Experimental Determination and Comparison with Solid-Liquid Equilibria-Based Predictions
Arndt, Jan-Hendrik; Brüll, Robert; Macko, Tibor; Perez, Francisco; Panitzky, Jens
Journal Article
2021Statistical evaluation of fatigue tests using maximum likelihood
Störzel, Klaus; Baumgartner, Jörg
Journal Article
2021Surrogate Model-Based Uncertainty Quantification for a Helical Gear Pair
Diestmann, T.; Broedling, N.; Götz, B.; Melz, T.
Conference Paper
2021Sustainable Components from PET Flakes
Schönberger, Frank; Khare, Shilpa; Harmia, Tapio
Journal Article
2021Synthesis of Ethyl (Diethoxymethyl)phosphinate Derivatives and Their Flame Retardancy in Flexible Polyurethane Foam: Structure-flame Retardancy Relationships
Zhou, F.; Ma, C.; Zhang, K.; Chan, Y.Y.; Xiao, Y.; Schartel, B.; Doring, M.; Wang, B.; Hu, W.; Hu, Y.
Journal Article
2021Temperature gradient interaction chromatography of linear polyethylene and isotactic polypropylene
Macko, Tibor; Arndt, Jan-Hendrik; Youlu, Yu; Brüll, Robert
Journal Article
2021Tuning and Emulation of Mechanical Characteristics - Tunable Mounts and a Mechanical Hardware-in-the-Loop Approach for More Efficient Research and Testing
Millitzer, J.; Hansmann, J.; Lapiccirella, G.; Tamm, C.; Herold, S.
Conference Paper
2021Unraveling the cause for the unusual processing behavior of commercial partially bio-based poly(butylene succinates) and their stabilization
Hallstein, J.; Gomoll, A.; Lieske, A.; Büsse, T.; Balko, J.; Brüll, R.; Malz, F.; Metzsch-Zilligen, E.; Pfaendner, R.; Zehm, D.
Journal Article
2021Valve design. Stress analysis reveals hints
Mehta, Alok R.; Bolzonella, Roberto; Kolupaev, Vladimir A.
Journal Article
2021Verwendung von phenolisch substituierten Zuckerderivaten als Stabilisatoren, Kunststoffzusammensetzung, Verfahren zur Stabilisierung von Kunststoffen sowie phenolisch substituierte Zuckerderivate
Pfaendner, Rudolf
Patent
2021Vorgehensmodell für risikobasierte Resilienzstrategien
Öhlinger, Florian; Friedmann, Andreas; Adolf, Thomas; Ryll, Frank; Toth, Daniel; Glawar, Robert
Journal Article
2021Ein Vorgehensmodell zur Etablierung eines Resilience Data Space als dezentrale Datenbasis für die sichere Gesellschaft am Beispiel von MANV-Übungsdaten
Sautter, Johannes; Kraft, Volker; Schmitz, Hans-Christian; Cetin, Fatma; Krauß, Jennifer; Offterdinger, Matthias; Müller, Philipp-Sebastian; Kupjetz, Simon Matthias; Nell, Rebecca; Schofer, Alisa; Dietzel, A.; Theobald, Jill Ann; Gözcüler, Ebru; Vrhovac, Žana
Conference Paper
2021Vorrichtung zum unabhängigen, variablen Einstellen der Steifigkeit in mindestens zwei Raumrichtungen
Kaal, William; Hansmann, Jan; Rieß, Sebastian
Patent
2021Zug/Druck-Unterschied im Verhalten von Kunststoffen
Kolupaev, Vladimir A.; Mehta, Alok R.; Nierbauer, Axel; Hertenstein, Dominik
Journal Article
2020Accelerated thermal aging of thermoplastic materials for the motor compartment: Characterization, degradation model and lifetime prediction
Lellinger, Dirk; Alig, Ingo; Oehler, Harald; Rode, Karsten; Malz, Frank; Herkenrath, Lena Mavie; Youn, Jee young
Book Article
2020Adequate Mathematical Beam-Column Model for Active Buckling Control in a Tetrahedron Truss Structure
Schäffner, Maximilian; Platz, Roland; Melz, Tobias
Conference Paper
2020Affordable Multi-Material Lightweight Design - Selected Results of the H2020 Project ALLIANCE
Bein, Thilo; Mbang, Sama; Thirinavukkarasu, Dinesh; Kerschbaum, Martin; Bassan, Daniele; Michler, Thorsten; Meschke, Jens; Jonasson, Paul; Ierides, Marcos
Presentation
2020Analysis and design of efficient multiple-input multiple-output broadband active vibration control systems
Lapiccirella, Giovanni
Dissertation
2020Analyzing Propagation of Model Form Uncertainty for Different Suspension Strut Models
Feldmann, Robert; Schäffner, Maximilian; Gehb, Christopher M.; Platz, Roland; Melz, Tobias
Conference Paper
2020Applying Uncertainty Quantification to Structural Systems: Parameter Reduction for Evaluating Model Complexity
Locke, Robert; Kupis, Shyla; Gehb, Christopher M.; Platz, Roland; Atamturktur, Sez
Conference Paper
2020Assessing the Influence of Different Forging Process Parameters on the Local Fatigue Properties of a Precipitation Hardening Ferritic-Pearlitic Steel
Hell, M.; Wagener, R.; Melz, T.
Conference Paper
2020BAYESIAN Inference Based Parameter Calibration of a Mechanical Load-Bearing Structure’s Mathematical Model
Gehb, Christopher M.; Platz, Roland; Melz, Tobias
Conference Paper
2020Bayesian Inference Based Parameter Calibration of the LuGre-Friction Model
Gehb, C.M.; Atamturktur, S.; Platz, R.; Melz, T.
Journal Article
2020Behavior of Forging Steels under Cyclic Loading - the Benefit of Air-Hardening Martensites
Schmiedl, Tobias; Gramlich, Alexander R.M.; Schönborn, Steffen; Melz, Tobias
Journal Article
2020Bewertung ausgewählter Schmiedeparameter in Bezug auf das Ermüdungsverhalten von AFP-Stählen
Hell, Matthias; Wagener, Rainer; Krupp, Ulrich; Blankart, Charline; Melz, Tobias
Journal Article
2020Case study on noise identification of an electric vehicle using psychoacoustic metrics
Guimaraes, G.P.; Schmidt, Matthias; Bartel, Torsten; Matthias, Michael
Conference Paper
2020Concept Study on Windshield Actuation for Active Control of Wind Noise in a Passenger Car
Koch, T.; Kim, J.-K.; Millitzer, J.; Lee, J.; Stoll, G.; Kaal, W.; Schmidt, M.; Ih, K.-D.; Oh, C.
Report
2020Conceptual development of vibroacoustic metamaterial structures for thin-walled composite structures for aerospace applications
Manushyna, Daria; Atzrodt, Heiko; Deschauer, N.
Conference Paper
2020Coordination Compounds of 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-Oxide (DOPO) Ligands: Extremely High Thermostability and Ligand Oxidation in the Solid State
Goedderz, Daniela; Schäfer, Timmy; Klitsch, Johannes; Weber, Lais; Weber, Bettina; Fuhr, Olaf; Buntkowsky, Gerd; Schönberger, Frank; Döring, Manfred
Journal Article
2020Damage detection of joining technologies for printed controller boards in automobiles
Hülsebrock, M.; Herrnberger, M.; Atzrodt, H.; Lichtinger, R.
Conference Paper
2020Demonstration of energy harvesting with piezoelectrets in aircraft structures with a simplified structure based on a NASA wingbox model
Holzmann, Hendrik; Schmelz, Jonas; Atzrodt, Heiko; Park, Ye Ji
Conference Paper
2020Deriving the Structural Fatigue Behavior of Additively Manufactured Components
Wagener, R.; Hell, M.; Scurria, M.; Bein, T.
Conference Paper
2020Detection of Pin Failure in Carbon Fiber Composites Using the Electro-Mechanical Impedance Method
Moll, Jochen; Schmidt, Matthias; Käsgen, Johannes; Mehldau, Jörg; Bücker, Marcel; Haupt, Felix
Journal Article
2020Development of a highly adaptable method for structural integrity assessment by means of a removable piezoelectric measurement head for electromechanical impedance determination
Park, Y.J.; Asins, C.C.; Laveuve, D.; Brandt, M.; Rieß, S.; Gerhardt, M.
Conference Paper
2020Development of air-hardening martensitic forging steels
Gramlich, A.; Schmiedl, T.; Schönborn, S.; Melz, T.; Bleck, W.
Journal Article
2020Development, System Integration and Experimental Investigation of an Active HVAC Noise Control System for a Passenger Car
Millitzer, J.; Kim, J.-K.; Mees, V.; Lee, J.; Oh, C.; Ranisch, C.; Ih, K.-D.
Report
2020Digital twin as solution for time latency in connected hardware-in-the-loop test benches
Bartolozzi, Riccardo; Stelter, Eva-Maria; Nickel, D.; Schyr, Christian; Sültrop, Christian; Möller, Riccardo
Conference Paper
2020Drivers influence on wheel load spectra
Ma, S.; Käsgen, Johannes; Heim, Rüdiger
Conference Paper
2020Dynamische Prüfung von Kunststoffen bei tiefen Temperaturen
 
Journal Article
2020Efficient flame retardant interplay of unsaturated polyester resin formulations based on ammonium polyphosphate
Reuter, J.; Greiner, L.; Kukla, P.; Döring, M.
Journal Article
2020Efficient Modeling and Simulation of the Transverse Isotropic Stiffness and Damping Properties of Laminate Structures Using Finite Element Method
Somesan, Vlad; Barti, Endre; Bein, Thilo
Report
2020Evaluation of the gear noise reduction potential of geometrically uneven inequidistant gears
Neubauer, Philipp; Bös, Joachim; Melz, Tobias
Journal Article
2020Experimentelle Analyse und phänomenologisch basierte Modellierung des Deformationsverhaltens von prismatischen Lithium-Ionen-Zellen unter mechanischer Last
Kotter, Philip
Dissertation
2020Fatigue assessment of additively manufactured AlSi10Mg laser beam welded to rolled EN AW-6082-T6 sheet metal
Möller, B.; Schnabel, K.; Wagener, R.; Kaufmann, H.; Melz, T.
Journal Article
2020Fatigue assessment of welded thin sheets with the notch stress approach - Proposal for recommendations
Baumgartner, J.; Hobbacher, A.F.; Rennert, R.
Journal Article
2020Fatigue Behavior of Thick-Walled Nodular Cast Iron Containing Dross
Bleicher, Christoph
Journal Article
2020A Fatigue Life Approach for Additively Manufactured Structures
Wagener, R.; Möller, B.; Scurria, M.; Bein, T.
Conference Paper
2020Fatigue of brazed joints made of X5CrNi18-10 and Cu110 and derivation of reliable assessment approaches
Baumgartner, J.; Tillmann, W.; Bobzin, K.; Öte, M.; Wiesner, S.; Sievers, N.
Journal Article
2020Fatigue Strength Under Spectrum Loading
Heim, R.
Book Article
2020Fire behavior of flame retarded sandwich structures containing PET foam cores and epoxy face sheets
Bethke, Christian; Weber, Lais; Goedderz, Daniela; Standau, Tobias; Döring, Manfred; Altstädt, Volker
Journal Article
2020Flame retardant polyester by combination of organophosphorus compounds and an NOR radical forming agent
Goedderz, Daniela; Weber, Lais; Markert, Daniel; Schießer, Alexander; Fasel, Claudia; Riedel, Ralf; Altstädt, Volker; Bethke, Christian; Fuhr, Olaf; Puchtler, Florian; Breu, Josef; Döring, Manfred
Journal Article
2020Flame-retardant hybrid materials based on expandable polystyrene beads
Reuter, J.; Standau, T.; Altstädt, V.; Döring, M.
Journal Article
2020Form-stable phase change materials based on SEBS and paraffin
Rickert, R.; Klein, R.; Schönberger, F.
Journal Article
2020Fractures on a drillship derrick, evaluation and improvement
Grubišić, V.; Barle, J.; Vlak, F.; Ban, D.
Journal Article
2020Fraunhofer LBF - Macht Schluss mit Brummen und Dröhnen
Rieß, Sebastian; Hansmann, Jan; Kaal, William
Journal Article
2020Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit. Jahresbericht 2019
 
Annual Report
2020Functionalized structural components with adaptive stiffness for soft robotic applications
Wockenfuß, Wilhelm Richard; Weisheit, Linda; Kaal, William; Rieß, Sebastian
Presentation
2020Hochglanzprodukte leichter entformen
Steinhoff, Bernd; Kothe, Hans; Keunecke, Martin; Burmeister, Frank; Meyer, Frank; Zosel, Jürgen
Journal Article
2020Improving the flame‐retardant property of bottle‐grade PET foam made by reactive foam extrusion
Bethke, Christian; Goedderz, Daniela; Weber, Lais; Standau, Tobias; Döring, Manfred; Altstädt, Volker
Journal Article
2020In-depth characterization of polyolefin plastomers/elastomers (ethylene/1-octene copolymers) through hyphenated chromatographic techniques
Arndt, Jan-Hendrik; Brüll, Robert; Macko, Tibor; Garg, P.; Tacx, Jacques C.J.F.
Journal Article
2020The influence of coverage for high frequency mechanical impact treatment of different steel grades
Schubnell, J.; Eichheimer, C.; Ernould, C.; Maciolek, A.; Rebelo-Kornmeier, J.; Farajian, M.
Journal Article
2020Influence of the optical measurement technique and evaluation approach on the determination of local weld geometry parameters for different weld types
Schubnell, J.; Jung, M.; Le, C.H.; Farajian, M.; Braun, M.; Ehlers, S.; Fricke, W.; Garcia, M.; Nussbaumer, A.; Baumgartner, J.
Journal Article
2020Influencing Factors for Fatigue Strength
Heim, R.
Book Article
2020Integrale Betrachtung zur Lebensdauerabschätzung von Stumpfnähten im Bereich der Kurzzeitschwingfestigkeit
Möller, Benjamin
Dissertation
2020Investigation of flame retarded polypropylene by high-speed planar laser-induced fluorescence of OH radicals combined with a thermal decomposition analysis
Geschwindner, Christopher; Goedderz, Daniela; Li, Tao; Köser, Jan; Fasel, Claudia; Riedel, Ralf; Altstädt, Volker; Bethke, Christian; Puchtler, Florian; Breu, Josef; Döring, Manfred; Dreizler, Andreas; Böhm, Benjamin
Journal Article
2020Kompositplatte, Verfahren zu ihrer Herstellung sowie Verwendungen hiervon
Burlon, Konrad; Döring, Manfred; Klein, Roland; Bilger, Lorenz
Patent
2020Load and structural health monitoring of a scaled CFRP rudder stock using electro-mechanical impedance technique
Moll, Jochen; Schmidt, Matthias; Käsgen, Johannes; Mehldau, Jörg; Bücker, Marcel; Haupt, Felix
Conference Paper
2020A method for the strain rate dependent correction for control type of fatigue tests
Geilen, Max Benedikt; Klein, M.; Oechsner, Matthias; Kaffenberger, M.; Störzel, Klaus; Melz, Tobias
Journal Article
2020Moderne Analytik für Polyolefin-Compounds
 
Journal Article
2020Monitoring ermöglicht optimale Produktqualität
Park, Ye Ji
Journal Article
2020Motivation
Heim, R.
Book Article
2020Multiaxial fatigue life response depending on proportionality grade between normal and shear strains/stresses and material ductility
Sonsino, Cetin Morris
Journal Article
2020A novel class of high molecular weight multifunctional antioxidants for polymers based on thiol-ene click reaction
Fischer, Johannes; Metzsch-Zilligen, Elke; Zou, Mingyi; Pfaendner, Rudolf
Journal Article
2020Numerical and experimental validation of residual stresses of laser-welded joints and their influence on the fatigue behaviour
Sepe, R.; Wiebesiek, J.; Sonsino, C.M.
Journal Article
2020On the anisotropic plastic behaviour of short fibre reinforced thermoplastics and its description by phenomenological material modelling
Dillenberger, Felix
Book
2020On the use of a fictitious notch radius equal to 0.3 mm to design against fatigue welded joints made of wrought magnesium alloy AZ31
Karakaş, Ö.; Baumgartner, J.; Susmel, L.
Journal Article
2020Operating Life Analysis
Heim, R.
Book Article
2020Optimizing Viscoelastic Properties of Rubber Compounds for Ballistic Applications
Karl, Janis; Kirsch, Franziska; Faderl, Norbert; Perko, Leonhard; Fras, Teresa
Journal Article
2020Phosphorhaltige Polyacrylamide und deren Verwendung als Flammschutzmittel
Döring, Manfred; Greiner, Lara
Patent
2020Porous graphite as stationary phase for the chromatographic separation of polymer additives - determination of adsorption capability by Raman spectroscopy and physisorption
Kot, David; Zou, Mingyi; Brunnengräber, Kai; Arndt, Jan-Hendrik; Macko, Tibor; Etzold, Bastian J.M.; Brüll, Robert
Journal Article
2020Precise laser structures as a tool to understand metal-polymer joints
Woitun, D.; Roderus, M.; Bein, T.; Kroner, E.
Journal Article
2020Quantification and Evaluation of Parameter and Model Uncertainty for Passive and Active Vibration Isolation
Lenz, Jonathan; Platz, Roland
Conference Paper
2020Recursive Gaussian Processes for Discrepancy Modeling
Feldmann, Robert; Gehb, Christopher M.; Schäffner, Maximilian; Melz, Tobias
Conference Paper
2020Schwingfestigkeit dickwandiger Eisengussbauteile bei mehrachsigen Beanspruchungen
Störzel, Klaus; Faß, Markus; Baumgartner, Jörg; Melz, Tobias
Journal Article
2020Selection of an adequate model of a piezo-elastic support for structural control in a beam truss structure
Lenz, Jonathan; Schäffner, Maximilian; Platz, Roland; Melz, Tobias
Conference Paper
2020Sensor integration within composite structures for continuous load monitoring
Memmolo, V.; Schmidt, M.; Maio, L.; Ricci, F.
Conference Paper
2020Simulation Process for the Acoustical Excitation of DC-Link Film Capacitors in Highly Integrated Electrical Drivetrains
Herrnberger, M.; Hülsebrock, M.; Bonart, J.; Lichtinger, R.; Atzrodt, H.; Pohn, J.
Report
2020Solid State Fluorination on the Minute Scale: Synthesis of WO3-x Fx with Photocatalytic Activity
Lange, M.A.; Krysiak, Y.; Hartmann, J.; Dewald, G.; Cerretti, G.; Tahir, M.N.; Panthöfer, M.; Barton, B.; Reich, T.; Zeier, W.G.; Mondeshki, M.; Kolb, U.; Tremel, W.
Journal Article
2020Special Issue: "Fatigue of Welded Joints - Current State-of-the-Art"
Karakas, Ö.; Baumgartner, J.; Berto, F.; Livieri, P.; Susmel, L.
Journal Article
2020Statistical analysis of S/N-curves by means of a fatigue database for polypropylene
Spancken, D.; Monte, M. de; Moosbrugger, E.; Büter, A.
Journal Article
2020Stochastic identification of parametric reduced order models of printed circuit boards
Hülsebrock, M.; Herrnberger, M.; Atzrodt, H.; Lichtinger, R.
Conference Paper
2020Structural Durability
Heim, R.
Book Article
2020Structural Durability. Methods and Concepts
Heim, Rüdiger
Book
2020A Summary of Piezoelectric Energy Harvesting for Autonomous Smart Structures
Grasböck, Lukas; Reininger, Alexander; Nader, Manfred; Humer, Alexander; Schagerl, Martin; Misol, Malte; Monner, Hans Peter; Herold, Sven; Mayer, Dirk
Conference Paper
2020Symbiose virtueller und experimenteller Methoden für effizienteres Testen und Entwickeln
Hansmann, Jan; Millitzer, Jonathan; Rieß, Sebastian; Balzer, Louis
Conference Paper
2020Synthesis of novel bisphosphorylimides based on Staudinger reaction
Weber, Lais; Weinert, Michael; Goedderz, Daniela; Fuhr, Olaf; Döring, Manfred
Journal Article
2020Synthesis of Novel Polymeric Acrylate-Based Flame Retardants Containing Two Phosphorus Groups in Different Chemical Environments and their Influence on the Flammability of Poly (Lactic Acid)
Sag, Jacob; Kukla, Philipp; Goedderz, Daniela; Roch, Hendrik; Kabasci, Stephan; Döring, Manfred; Schönberger, Frank
Journal Article
2020Ultraglatte antiadhäsive Werkzeugbeschichtungen für Kunststoffformgebungs- und Folienverarbeitungsprozesse (GLANZFORM)
Steinhoff, B.; Burmeister, F.; Keunecke, Martin
Report
2020Verfahren und Produktionsanlage zur Verarbeitung eines Werkstoffs
Perko, Leonhard; Steinhoff, Bernd
Patent
2020Verfahren zur Stabilisierung von halogenfreien thermoplastischen Kunststoff-Rezyklaten, Kunststoff-Zusammensetzung, Stabilisator-Zusammensetzung sowie Verwendung der Stabilisator-Zusammensetzung
Pfaendner, Rudolf; Metzsch-Zilligen, Elke
Patent
2020Verfahren zur Stabilisierung von thermoplastischen Kunststoff-Rezyklaten sowie stabilisierte Kunststoffzusammensetzungen und hieraus hergestellte Formmassen und Formteile
Pfaendner, Rudolf
Patent
2020Verfahren zur Stabilisierung von thermoplastischer Kunststoffneuware sowie stabilisierte Kunststoffzusammensetzungen, hieraus hergestellte Formmassen und Formteile, Stabilisator-Zusammensetzungen sowie Verwendungen hiervon
Metzsch-Zilligen, Elke; Pfaendner, Rudolf
Patent
2020Das Verhalten von Elastomerlagern im Fahrwerk unter Betriebs- und Sonderlasten
Riedel, Frieder; Baumann, Michael; Melz, Tobias; Möller, Riccardo
Journal Article
2020Verknüpfung von Betriebsfestigkeit, zerstörungsfreier Prüftechnik und Gießsimulation in einem virtuellen Grenzmusterbauteil
Erz, Christian; Bleicher, Christoph
Journal Article
2020Verwendung einer Additivzusammensetzung zum kontrollierten beschleunigten Abbau von Kondensationspolymeren
Polidar, Matthias; Metzsch-Zilligen, Elke; Pfaendner, Rudolf
Patent
2020Werkstoff- und Bauteiloptimierung für leistungsfähigere Gusskomponenten im Antriebsstrang von Windenergieanlagen durch den Einsatz von Kokillenguss
Niewiadomski, Jan
Journal Article
2020Zur rechnerischen Lebensdauerabschätzung für Faser-Kunststoff-Verbunde
Laveuve, Dominik Maximilian
Dissertation