| | |
|---|
| 2021 | Analysis of the molecular heterogeneity of poly(lactic acid)/poly(butylene succinate-co-adipate) blends by hyphenating size exclusion chromatography with nuclear magnetic resonance and infrared spectroscopy
Malz, Frank; Arndt, Jan-Hendrik; Balko, Jens; Barton, Bastian; Büsse, Thomas; Imhof, Dennis; Pfaendner, Rudolf; Rode, Karsten; Brüll, Robert | Journal Article |
| 2021 | Artificial weathering and accelerated heat aging studies on low-density polyethylene (LDPE) produced via autoclave and tubular process technologies
Luyt, Adriaan Stephanus; Gasmi, Soumia Abderrazak; Malik, Sarah Shahid; Aljindi, R.M.; Ouederni, M.; Vouyiouka, S.N.; Porfyris, A.D.; Pfaendner, Rudolf; Papaspyrides, C.D. | Journal Article |
| 2021 | Bird strike resistance of a CFRP morphing leading edge
May, Michael; Arnold-Keifer, Sonja; Landersheim, Volker; Laveuve, Dominik; Contell Asins, Conchin; Imbert, Mathieu | Journal Article |
| 2021 | Design of a composite nose wheel for commercial aircraft
Wacker, Jens David; Laveuve, Dominik; Contell Asins, Conchin; Büter, Andreas | Conference Paper |
| 2021 | Design of a morphing leading edge as a high lift device for a regional aircraft
Contell Asins, Conchin; Landersheim, V.; Wacker, J.-D.; Adachi, S.; Arnold-Keifer, Sonja; May, Michael | Conference Paper |
| 2021 | InCeight Casting C(hoch)8 2021
: Bleicher, Christoph | Conference Proceedings |
| 2021 | Korrosionseinfluss durch biogene Ottokraftstoffe auf die Lebensdauer zyklisch hochbelasteter Motorkomponenten aus hochlegiertem Chromstahl
Käfer, Sven | Dissertation |
| 2021 | Mode of dipentaerythritol stabilization during thermo-oxidative aging of glass fibre reinforced PA66
Klump, Katja; Tenzer, Dominik; Pfaendner, Rudolf; Schönberger, Frank | Journal Article |
| 2021 | N-phosphorylated Iminophosphoranes based on 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide and their flame-retardant behavior in epoxy resins
Weinert, Michael; Döring, Manfred | Journal Article |
| 2021 | A phenomenological criterion for an optical assessment of PE-HD fracture surfaces obtained from FNCT
Schilling, Markus; Niebergall, Ute; Marschall, Niklas; Alig, Ingo; Böhning, Martin | Journal Article |
| 2020 | Accelerated thermal aging of thermoplastic materials for the motor compartment: Characterization, degradation model and lifetime prediction
Lellinger, Dirk; Alig, Ingo; Oehler, Harald; Rode, Karsten; Malz, Frank; Herkenrath, Lena Mavie; Youn, Jee young | Book Article |
| 2020 | Adequate Mathematical Beam-Column Model for Active Buckling Control in a Tetrahedron Truss Structure
Schäffner, Maximilian; Platz, Roland; Melz, Tobias | Conference Paper |
| 2020 | Affordable Multi-Material Lightweight Design - Selected Results of the H2020 Project ALLIANCE
Bein, Thilo; Mbang, Sama; Thirinavukkarasu, Dinesh; Kerschbaum, Martin; Bassan, Daniele; Michler, Thorsten; Meschke, Jens; Jonasson, Paul; Ierides, Marcos | Presentation |
| 2020 | Analysis and design of efficient multiple-input multiple-output broadband active vibration control systems
Lapiccirella, Giovanni | Dissertation |
| 2020 | Analyzing Propagation of Model Form Uncertainty for Different Suspension Strut Models
Feldmann, Robert; Schäffner, Maximilian; Gehb, Christopher M.; Platz, Roland; Melz, Tobias | Conference Paper |
| 2020 | Applying Uncertainty Quantification to Structural Systems: Parameter Reduction for Evaluating Model Complexity
Locke, Robert; Kupis, Shyla; Gehb, Christopher M.; Platz, Roland; Atamturktur, Sez | Conference Paper |
| 2020 | Assessing the Influence of Different Forging Process Parameters on the Local Fatigue Properties of a Precipitation Hardening Ferritic-Pearlitic Steel
Hell, M.; Wagener, R.; Melz, T. | Conference Paper |
| 2020 | BAYESIAN Inference Based Parameter Calibration of a Mechanical Load-Bearing Structure’s Mathematical Model
Gehb, Christopher M.; Platz, Roland; Melz, Tobias | Conference Paper |
| 2020 | Bayesian Inference Based Parameter Calibration of the LuGre-Friction Model
Gehb, C.M.; Atamturktur, S.; Platz, R.; Melz, T. | Journal Article |
| 2020 | Behavior of Forging Steels under Cyclic Loading - the Benefit of Air-Hardening Martensites
Schmiedl, T.; Gramlich, A.R.M.; Schönborn, S.; Melz, T. | Journal Article, Conference Paper |
| 2020 | Case study on noise identification of an electric vehicle using psychoacoustic metrics
Guimaraes, G.P.; Schmidt, Matthias; Bartel, Torsten; Matthias, Michael | Conference Paper |
| 2020 | Concept Study on Windshield Actuation for Active Control of Wind Noise in a Passenger Car
Koch, T.; Kim, J.-K.; Millitzer, J.; Lee, J.; Stoll, G.; Kaal, W.; Schmidt, M.; Ih, K.-D.; Oh, C. | Report |
| 2020 | Coordination Compounds of 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-Oxide (DOPO) Ligands: Extremely High Thermostability and Ligand Oxidation in the Solid State
Goedderz, D.; Schäfer, T.; Klitsch, J.; Weber, L.; Weber, B.; Fuhr, O.; Buntkowsky, G.; Schönberger, F.; Döring, M. | Journal Article |
| 2020 | Demonstration of energy harvesting with piezoelectrets in aircraft structures with a simplified structure based on a NASA wingbox model
Holzmann, Hendrik; Schmelz, Jonas; Atzrodt, Heiko; Park, Ye Ji | Conference Paper |
| 2020 | Deriving the Structural Fatigue Behavior of Additively Manufactured Components
Wagener, R.; Hell, M.; Scurria, M.; Bein, T. | Conference Paper |
| 2020 | Detection of Pin Failure in Carbon Fiber Composites Using the Electro-Mechanical Impedance Method
Moll, Jochen; Schmidt, Matthias; Käsgen, Johannes; Mehldau, Jörg; Bücker, Marcel; Haupt, Felix | Journal Article |
| 2020 | Development of air-hardening martensitic forging steels
Gramlich, A.; Schmiedl, T.; Schönborn, S.; Melz, T.; Bleck, W. | Journal Article |
| 2020 | Development, System Integration and Experimental Investigation of an Active HVAC Noise Control System for a Passenger Car
Millitzer, J.; Kim, J.-K.; Mees, V.; Lee, J.; Oh, C.; Ranisch, C.; Ih, K.-D. | Report |
| 2020 | Drivers influence on wheel load spectra
Ma, S.; Käsgen, Johannes; Heim, Rüdiger | Conference Paper |
| 2020 | Dynamische Prüfung von Kunststoffen bei tiefen Temperaturen
| Journal Article |
| 2020 | Efficient flame retardant interplay of unsaturated polyester resin formulations based on ammonium polyphosphate
Reuter, J.; Greiner, L.; Kukla, P.; Döring, M. | Journal Article |
| 2020 | Efficient Modeling and Simulation of the Transverse Isotropic Stiffness and Damping Properties of Laminate Structures Using Finite Element Method
Somesan, V.; Barti, E.; Bein, T. | Journal Article |
| 2020 | Fatigue assessment of additively manufactured AlSi10Mg laser beam welded to rolled EN AW-6082-T6 sheet metal
Möller, B.; Schnabel, K.; Wagener, R.; Kaufmann, H.; Melz, T. | Journal Article |
| 2020 | Fatigue assessment of welded thin sheets with the notch stress approach - Proposal for recommendations
Baumgartner, J.; Hobbacher, A.F.; Rennert, R. | Journal Article |
| 2020 | A Fatigue Life Approach for Additively Manufactured Structures
Wagener, R.; Möller, B.; Scurria, M.; Bein, T. | Conference Paper |
| 2020 | Fatigue of brazed joints made of X5CrNi18-10 and Cu110 and derivation of reliable assessment approaches
Baumgartner, J.; Tillmann, W.; Bobzin, K.; Öte, M.; Wiesner, S.; Sievers, N. | Journal Article |
| 2020 | Fatigue Strength Under Spectrum Loading
Heim, R. | Book Article |
| 2020 | Fire behavior of flame retarded sandwich structures containing PET foam cores and epoxy face sheets
Bethke, Christian; Weber, Lais; Goedderz, Daniela; Standau, Tobias; Döring, Manfred; Altstädt, Volker | Journal Article |
| 2020 | Flame retardant polyester by combination of organophosphorus compounds and an NOR radical forming agent
Goedderz, Daniela; Weber, Lais; Markert, Daniel; Schießer, Alexander; Fasel, Claudia; Riedel, Ralf; Altstädt, Volker; Bethke, Christian; Fuhr, Olaf; Puchtler, Florian; Breu, Josef; Döring, Manfred | Journal Article |
| 2020 | Flame-retardant hybrid materials based on expandable polystyrene beads
Reuter, J.; Standau, T.; Altstädt, V.; Döring, M. | Journal Article |
| 2020 | Form-stable phase change materials based on SEBS and paraffin
Rickert, R.; Klein, R.; Schönberger, F. | Journal Article |
| 2020 | Fractures on a drillship derrick, evaluation and improvement
Grubišić, V.; Barle, J.; Vlak, F.; Ban, D. | Journal Article |
| 2020 | Fraunhofer LBF - Macht Schluss mit Brummen und Dröhnen
Rieß, Sebastian; Hansmann, Jan; Kaal, William | Journal Article |
| 2020 | Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit. Jahresbericht 2019
| Annual Report |
| 2020 | Functionalized structural components with adaptive stiffness for soft robotic applications
Wockenfuß, Wilhelm Richard; Weisheit, Linda; Kaal, William; Rieß, Sebastian | Presentation |
| 2020 | Hochglanzprodukte leichter entformen
Steinhoff, Bernd; Kothe, Hans; Keunecke, Martin; Burmeister, Frank; Meyer, Frank; Zosel, Jürgen | Journal Article |
| 2020 | Improving the flame‐retardant property of bottle‐grade PET foam made by reactive foam extrusion
Bethke, Christian; Goedderz, Daniela; Weber, Lais; Standau, Tobias; Döring, Manfred; Altstädt, Volker | Journal Article |
| 2020 | In-depth characterization of polyolefin plastomers/elastomers (ethylene/1-octene copolymers) through hyphenated chromatographic techniques
Arndt, Jan-Hendrik; Brüll, Robert; Macko, Tibor; Garg, P.; Tacx, Jacques C.J.F. | Journal Article |
| 2020 | The influence of coverage for high frequency mechanical impact treatment of different steel grades
Schubnell, J.; Eichheimer, C.; Ernould, C.; Maciolek, A.; Rebelo-Kornmeier, J.; Farajian, M. | Journal Article |
| 2020 | Influence of the optical measurement technique and evaluation approach on the determination of local weld geometry parameters for different weld types
Schubnell, J.; Jung, M.; Le, C.H.; Farajian, M.; Braun, M.; Ehlers, S.; Fricke, W.; Garcia, M.; Nussbaumer, A.; Baumgartner, J. | Journal Article |
| 2020 | Influencing Factors for Fatigue Strength
Heim, R. | Book Article |
| 2020 | Integral treatment of butt joints for the fatigue life assessment in the low cycle fatigue regime
Möller, B. | Journal Article |
| 2020 | Integrale Betrachtung zur Lebensdauerabschätzung von Stumpfnähten im Bereich der Kurzzeitschwingfestigkeit
Möller, Benjamin | Dissertation |
| 2020 | Investigation of flame retarded polypropylene by high-speed planar laser-induced fluorescence of OH radicals combined with a thermal decomposition analysis
Geschwindner, Christopher; Goedderz, Daniela; Li, Tao; Köser, Jan; Fasel, Claudia; Riedel, Ralf; Altstädt, Volker; Bethke, Christian; Puchtler, Florian; Breu, Josef; Döring, Manfred; Dreizler, Andreas; Böhm, Benjamin | Journal Article |
| 2020 | Load and structural health monitoring of a scaled CFRP rudder stock using electro-mechanical impedance technique
Moll, Jochen; Schmidt, Matthias; Käsgen, Johannes; Mehldau, Jörg; Bücker, Marcel; Haupt, Felix | Conference Paper |
| 2020 | A method for the strain rate dependent correction for control type of fatigue tests
Geilen, Max Benedikt; Klein, M.; Oechsner, Matthias; Kaffenberger, M.; Störzel, Klaus; Melz, Tobias | Journal Article |
| 2020 | Monitoring ermöglicht optimale Produktqualität
Park, Ye Ji | Journal Article |
| 2020 | Motivation
Heim, R. | Book Article |
| 2020 | Multiaxial fatigue life response depending on proportionality grade between normal and shear strains/stresses and material ductility
Sonsino, Cetin Morris | Journal Article |
| 2020 | A novel class of high molecular weight multifunctional antioxidants for polymers based on thiol-ene click reaction
Fischer, Johannes; Metzsch-Zilligen, Elke; Zou, Mingyi; Pfaendner, Rudolf | Journal Article |
| 2020 | Numerical and experimental validation of residual stresses of laser-welded joints and their influence on the fatigue behaviour
Sepe, R.; Wiebesiek, J.; Sonsino, C.M. | Journal Article |
| 2020 | On the anisotropic plastic behaviour of short fibre reinforced thermoplastics and its description by phenomenological material modelling
Dillenberger, Felix | Book |
| 2020 | On the use of a fictitious notch radius equal to 0.3 mm to design against fatigue welded joints made of wrought magnesium alloy AZ31
Karakaş, Ö.; Baumgartner, J.; Susmel, L. | Journal Article |
| 2020 | Operating Life Analysis
Heim, R. | Book Article |
| 2020 | Optimizing Viscoelastic Properties of Rubber Compounds for Ballistic Applications
Karl, Janis; Kirsch, Franziska; Faderl, Norbert; Perko, Leonhard; Fras, Teresa | Journal Article |
| 2020 | Porous graphite as stationary phase for the chromatographic separation of polymer additives - determination of adsorption capability by Raman spectroscopy and physisorption
Kot, David; Zou, Mingyi; Brunnengräber, Kai; Arndt, Jan-Hendrik; Macko, Tibor; Etzold, Bastian J.M.; Brüll, Robert | Journal Article |
| 2020 | Precise laser structures as a tool to understand metal-polymer joints
Woitun, D.; Roderus, M.; Bein, T.; Kroner, E. | Journal Article |
| 2020 | Quantification and Evaluation of Parameter and Model Uncertainty for Passive and Active Vibration Isolation
Lenz, Jonathan; Platz, Roland | Conference Paper |
| 2020 | Recursive Gaussian Processes for Discrepancy Modeling
Feldmann, Robert; Gehb, Christopher M.; Schäffner, Maximilian; Melz, Tobias | Conference Paper |
| 2020 | Schwingfestigkeit dickwandiger Eisengussbauteile bei mehrachsigen Beanspruchungen
Störzel, Klaus; Faß, Markus; Baumgartner, Jörg; Melz, Tobias | Journal Article |
| 2020 | Selection of an adequate model of a piezo-elastic support for structural control in a beam truss structure
Lenz, Jonathan; Schäffner, Maximilian; Platz, Roland; Melz, Tobias | Conference Paper |
| 2020 | Sensor integration within composite structures for continuous load monitoring
Memmolo, V.; Schmidt, M.; Maio, L.; Ricci, F. | Conference Paper |
| 2020 | Simulation Process for the Acoustical Excitation of DC-Link Film Capacitors in Highly Integrated Electrical Drivetrains
Herrnberger, M.; Hülsebrock, M.; Bonart, J.; Lichtinger, R.; Atzrodt, H.; Pohn, J. | Report |
| 2020 | Solid State Fluorination on the Minute Scale: Synthesis of WO3-x Fx with Photocatalytic Activity
Lange, M.A.; Krysiak, Y.; Hartmann, J.; Dewald, G.; Cerretti, G.; Tahir, M.N.; Panthöfer, M.; Barton, B.; Reich, T.; Zeier, W.G.; Mondeshki, M.; Kolb, U.; Tremel, W. | Journal Article |
| 2020 | Special Issue: "Fatigue of Welded Joints - Current State-of-the-Art"
Karakas, Ö.; Baumgartner, J.; Berto, F.; Livieri, P.; Susmel, L. | Journal Article |
| 2020 | Statistical analysis of S/N-curves by means of a fatigue database for polypropylene
Spancken, D.; Monte, M. de; Moosbrugger, E.; Büter, A. | Journal Article |
| 2020 | Structural Durability
Heim, R. | Book Article |
| 2020 | Structural Durability. Methods and Concepts
Heim, Rüdiger | Book |
| 2020 | A Summary of Piezoelectric Energy Harvesting for Autonomous Smart Structures
Grasböck, Lukas; Reininger, Alexander; Nader, Manfred; Humer, Alexander; Schagerl, Martin; Misol, Malte; Monner, Hans Peter; Herold, Sven; Mayer, Dirk | Conference Paper |
| 2020 | Symbiose virtueller und experimenteller Methoden für effizienteres Testen und Entwickeln
Hansmann, Jan; Millitzer, Jonathan; Rieß, Sebastian; Balzer, Louis | Conference Paper |
| 2020 | Synthesis of novel bisphosphorylimides based on Staudinger reaction
Weber, Lais; Weinert, Michael; Goedderz, Daniela; Fuhr, Olaf; Döring, Manfred | Journal Article |
| 2020 | Synthesis of Novel Polymeric Acrylate-Based Flame Retardants Containing Two Phosphorus Groups in Different Chemical Environments and their Influence on the Flammability of Poly (Lactic Acid)
Sag, Jacob; Kukla, Philipp; Goedderz, Daniela; Roch, Hendrik; Kabasci, Stephan; Döring, Manfred; Schönberger, Frank | Journal Article |
| 2020 | Ultraglatte antiadhäsive Werkzeugbeschichtungen für Kunststoffformgebungs- und Folienverarbeitungsprozesse (GLANZFORM)
Steinhoff, B.; Burmeister, F.; Keunecke, Martin | Report |
| 2020 | Verfahren und Produktionsanlage zur Verarbeitung eines Werkstoffs
Perko, Leonhard; Steinhoff, Bernd | Patent |
| 2020 | Das Verhalten von Elastomerlagern im Fahrwerk unter Betriebs- und Sonderlasten
Riedel, Frieder; Baumann, Michael; Melz, Tobias; Möller, Riccardo | Journal Article |
| 2020 | Zur rechnerischen Lebensdauerabschätzung für Faser-Kunststoff-Verbunde
Laveuve, Dominik Maximilian | Dissertation |
| 2019 | About a Digital Twin for the Fatigue Approach of Additively Manufactured Components
Wagener, Rainer; Scurria, Matilde; Bein, Thilo | Conference Paper |
| 2019 | Accurate determination of the layer thickness of a multilayer polymer film by non-invasive multivariate confocal Raman microscopy
Zou, M.Y.; Barton, B.; Geertz, G.; Brüll, R. | Journal Article |
| 2019 | Additive Fertigung von integrierten Aktoren und Sensoren
Bartel, Torsten; Röglin, Tobias | Book Article |
| 2019 | Advanced measurements and model update of an automotive turbochargerwith full-floating journal bearings
Leichtfuß, Sebastian; Kreschel, Martin; Durbiano, Loic; Dielenschneider, Tobias; Nordmann, Rainer; Atzrodt, Heiko; Pilotto, Rafael; Schiffer, Heinz-Peter | Conference Paper |
| 2019 | Akustische Anregungsquellen in hochintegrierten Leistungselektroniken mobiler Antriebe
Herrnberger, Maximilian; Hülsebrock, Moritz; Lichtinger, R.; Atzrodt, Heiko | Conference Paper |
| 2019 | Anordnung mit einer Seilklemme und wenigstens einem Seil
Kraus, Roman | Patent |
| 2019 | Assessing Model Form Uncertainty for a Suspension Strut using Gaussian Processes
Feldmann, Robert; Platz, Roland | Conference Paper |
| 2019 | Assessment of the Fatigue Strength of Thick-Walled Nodular Cast Iron with Dross
Bleicher, Christoph; Wagener, Rainer; Kaufmann, Heinz; Tschuncky, Ralf; Weber, Fabian; Hettich, Philipp; Buchmüller, Steffen; Berg, Hans W. | Journal Article, Conference Paper |
| 2019 | Benchmarking Workshop on (active) vibration damping
Reischl, Daniel; Mayer, Dirk; Herold, Sven; Mrak, Branimir; Venkatesan, S.K.; Berger, Wolfgang; Nader, Manfred; Depraetere, Bruno | Conference Paper |
| 2019 | Beschreibung des zyklischen Verhaltens eines Strukturelementes zur Lebensdauerabschätzung von additiv gefertigten Bauteilen
Wagener, Rainer; Scurria, Matilde; Möller, Benjamin | Conference Paper |
| 2019 | Characterization of the Cyclic Material Behavior of AlSi10Mg and Inconel® 718 produced by SLM
Scurria, Matilde; Möller, Benjamin; Wagener, Rainer; Bein, Thilo | Conference Paper |
| 2019 | Comparison of constrained parameterisation strategies for aerodynamic optimisation of morphing leading edge airfoil
Magrini, A.; Benini, E.; Ponza, R.; Wang, C.; Khodaparast, H.H.; Friswell, M.I.; Landersheim, V.; Laveuve, D.; Contell Asins, C. | Journal Article |
| 2019 | Conceptual-level evaluation of a variable stiffness skin for a morphing wing leading edge
Wang, C.; Haddad Khodaparast, H.; Friswell, M.I.; Magrini, A.; Ponza, R.; Benini, E.; Landersheim, V.; Laveuve, D.; Contell Asins, C. | Journal Article |
| 2019 | Cyclic Material Behavior of Ultra‐High‐Strength Fine‐Grained Steels and Welds for the Application in Fatigue Assessment Approaches
Möller, Benjamin; Wagener, Rainer; Melz, Tobias | Journal Article, Conference Paper |
| 2019 | Deriving strain based local structural element concept for the fatigue assessment of additively manufactured structures
Wagener, R.; Möller, B.; Melz, T.; Scurria, M. | Report |
| 2019 | Description of the cyclic material behaviour of aluminium wrought alloys as basis for a digital twin
Wagener, Rainer; Maciolek, Andreas; Kaufmann, Heinz | Journal Article |
| 2019 | Design and Optimization of Mechatronic Systems Using a Holistic and Parametric Simulation Approach
Tamm, Christoph; Perfetto, Sara | Journal Article, Conference Paper |
| 2019 | Development of a rotational energy harvesting tuned vibration absorber for torsional vibrations
Infante, Francesco | Dissertation |
| 2019 | Digitale Vernetzung für Leichtbau-optimierte Gussbauteile
Bleicher, Christoph | Journal Article |
| 2019 | Effect of Laser Beam Welding on the Cyclic Material Behavior of the Press-hardened Martensitic Chromium Steel X46Cr13
Möller, Benjamin; Wagener, Rainer; Melz, Tobias | Journal Article, Conference Paper |
| 2019 | Effect of the Surface Finish on the Cyclic Behavior of Additively Manufactured AlSi10Mg
Scurria, Matilde; Möller, Benjamin; Wagener, Rainer; Melz, Tobias | Conference Paper |
| 2019 | Effects of different heat treatments on the cyclic material behavior of additively manufactured Inconel®718
Scurria, Matilde; Möller, Benjamin; Wagener, Rainer; Bein, Thilo | Journal Article, Conference Paper |
| 2019 | Effects of Surface Preparation, Support Structures and Build Orientation on the Cyclic Stress-Strain Behavior of Inconel®718 Produced by SLM
Scurria, Matilde; Möller, Benjamin; Wagener, Rainer; Pena, Jose; Bein, Thilo | Report |
| 2019 | Einfluss biogener Kraftstoffe auf das Ermüdungsverhalten von Stählen
Käfer, Sven; Melz, Tobias; Engler, Tom; Oechsner, Matthias | Journal Article |
| 2019 | Einfluss des Korrosionsverhaltens von Aluminiumlegierungen auf das Korrosionsermüdungsverhalten im Einstufen- und Betriebslastenversuch
Bauer-Troßmann, Kathrin | Dissertation |
| 2019 | Einfluss von Druckwasserstoff auf das Schwingfestigkeitsverhalten eines ferritischen und austenitischen Edelstahls im LCF-Bereich
Schmiedl, Tobias; Schönborn, Steffen; Melz, Tobias | Conference Paper |
| 2019 | Einfluss von Gusshautrandzonen auf die Schwingfestigkeit von Gusseisen mit Kugelgrafit
Bleicher, Christoph; Melz, Tobias; Berger, Kim; Kutz, Adalbert; Bührig-Polaczek, Andreas | Journal Article |
| 2019 | Einfluss von Mangansulfiden auf die statische und zyklische Festigkeit
Scurria, Matilde; Melz, Tobias; Kock, Christoph; Chugreev, Alexander; Relge, Roman; Bonhage, Martin; Behrens, Bernd-Arno | Journal Article |
| 2019 | Einfluss von Temperatur und Halbzeuggröße auf das Schwingfestigkeitsverhalten von Proben aus Sphäroguss
Schönborn, Steffen; Melz, Tobias | Conference Paper |
| 2019 | Einflüsse auf das zyklische Werkstoffverhalten von additiv gefertigten metallischen Strukturen und deren Berücksichtigung bei der Schwingfestigkeitsbewertung
Wagener, Rainer; Scurria, Matilde; Schnabel, Kai; Bein, Thilo | Book Article |
| 2019 | Elastomere Sensorwerkstoffe zur Digitalisierung industrieller Prozesse
Kaal, William; Rieß, Sebastian | Journal Article |
| 2019 | EMPT verbindet Stahl und Alu so fest wie herkömmlich geschweißt
Baumgartner, Jörg | Journal Article |
| 2019 | Entwicklung experimenteller und numerischer Methoden zur Modellbildung der Schneid-Klemmverbindung
Haouel, M.; Kimpel, T.; Wagener, Rainer; Melz, Tobias; Kaufmann, Heinz | Conference Paper |
| 2019 | Ermittlung richtungsabhängiger Kennwerte für kurzfaserverstärkte Thermoplaste: Erzeugung hochorientierter Proben und der Einfluss der Probenpräparation
Roo, Tamara van | Conference Paper |
| 2019 | Estimation of Component Fatigue Lives under Service Load-Time Functions Using an Advanced Transfer Methodology for the Transition from Specimen to Component Related Material Behaviour
Hell, Matthias; Wagener, Rainer | Journal Article, Conference Paper |
| 2019 | Evaluation of fatigue strength criteria for thick-walled nodular cast iron components from EN-GJS-400 under multiaxial load
Faß, Markus; Störzel, Klaus; Baumgartner, Jörg | Conference Paper |
| 2019 | Evaluation of uncertainty in the vibration attenuation with shunted piezoelectric transducers intregrated in a beam-column support
Götz, Benedict | Dissertation |
| 2019 | Extreme Yield Figures for Universal Strength Criteria
Rosendahl, P.L.; Kolupaev, Vladimir A.; Altenbach, Holm | Book Article |
| 2019 | Fatigue analysis of cast iron components considering the influence of casting skin
Bergner, Kim Martine; Hesseler, Jan; Bleicher, Christoph | Journal Article, Conference Paper |
| 2019 | Fatigue Assessment of Additively Manufactured Metallic Structures Using Local Approaches Based on Finite-Element Simulations
Schnabel, Kai; Baumgartner, Jörg; Möller, Benjamin | Journal Article, Conference Paper |
| 2019 | Fatigue behavior of large cast components under variable amplitude loading with overloads
Bleicher, C.; Wagener, R.; Kaufmann, H. | Report |
| 2019 | Fatigue Strength Assessment for components and subsystems of a lightweight, space saving city car with electric drive
Voigt, Thorsten; Lipp, Klaus; Melz, Tobias | Journal Article, Conference Paper |
| 2019 | Fatigue strength assessment of TIG-dressed welded steel joints by local approaches
Baumgartner, J.; Yildirim, H.C.; Barsoum, Z. | Journal Article |
| 2019 | Fatigue Strength of Laser Beam Welded Steel-Aluminium Joints Considering Variable Amplitude Loading and Corrosive Environment
Möller, Benjamin; Albrecht, Simon; Wagener, Rainer; Melz, Tobias | Journal Article, Conference Paper |
| 2019 | Flexible materials with PTC effect
Koppler, Dagmar; Dill, Alexander; Proksch, Bettina; Malz, Frank | Journal Article |
| 2019 | Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit. Jahresbericht 2018
| Annual Report |
| 2019 | Frequency-dependent material properties of copper and aluminum alloys
Loos, D.; Barti, E.; Schröter, G.; Wagener, R.; Melz, T. | Journal Article |
| 2019 | Ganzheitliche Simulation aktiver NVH-Systeme im Fahrzeug
Atzrodt, Heiko; Grimm, Andreas-Josef; Steinkamp, Uwe; Hüskens, Patrick | Journal Article |
| 2019 | Halogen-Free Flame-Retardant Compounds. Thermal Decomposition and Flammability Behavior for Alternative Polyethylene Grades
Luyt, Adriaan Stephanus; Malik, Sarah Shahid; Gasmi, Soumia Abderrazak; Porfyris, Athanasios; Andronopoulou, Anna; Korres, Dimitrios; Vouyiouka, Stamatina; Großhauser, Michael; Pfaendner, Rudolf; Brüll, Robert; Papaspyrides, Constantine | Journal Article |
| 2019 | Heat capacity spectroscopy by using stochastic temperature modulated calorimetry: Time-temperature superposition and fictive temperature at the glass transition of poly (vinyl acetate)
Alig, I.; Böhm, F.; Lellinger, D. | Journal Article |
| 2019 | High performance liquid chromatography of polyolefin plastomers/elastomers (ethylene/1-octene copolymers) - Comparison of different solvent systems
Arndt, Jan-Hendrik; Brüll, Robert; Macko, Tibor; Garg, Praveen; Tacx, Jacques C.J.F. | Journal Article |
| 2019 | Hochdynamische Charakterisierung von hydraulischen Schwingungsdämpfern
Rieß, Sebastian; Hansmann, Jan; Kaal, William; Herold, Sven | Journal Article |
| 2019 | Hochfrequente Charakterisierung und Modellierung von Elastomerlagern
Kaal, William; Rieß, Sebastian | Journal Article |
| 2019 | HPLC Separation of Ethylene-Vinyl Acetate Copolymers According to Chemical Composition
Macko, Tibor; Arndt, Jan-Hendrik; Brüll, Robert | Journal Article |
| 2019 | Hybride Methoden und Entwicklungswerkzeuge für effizienteres Testen und Entwickeln
Hansmann, Jan; Millitzer, Jonathan; Rieß, Sebastian; Balzer, Louis | Journal Article |
| 2019 | Improvement of fracture toughness and glass transition temperature of DGEBA‐based epoxy systems using toughening and crosslinking modifiers
Utaloff, K.; Kothmann, M.H.; Ciesielski, M.; Döring, M.; Neumeyer, T.; Altstädt, V.; Gorman, I.; Henningsen, M. | Journal Article |
| 2019 | In-situ X-ray computed tomography of composites subjected to fatigue loading
Wagner, Peter; Schwarzhaupt, Oliver; May, Michael | Journal Article |
| 2019 | Influence of annealing conditions on elastic and dielectric properties of P(VDF-TrFE) copolymer and its composites
Belovickis, Jaroslavas; Werne, Lisa; Silibin, Maxim; Samulionis, Vytautas; Lellinger, Dirk; Oehler, Harald; Banys, Juras; Sysa, Artem; Nekludov, Kapiton; Shvartsman, Vladimir V.; Alig, Ingo | Journal Article |
| 2019 | Influence of remaining casting skin on the fatigue strength of cast iron components
Bergner, Kim Martine; Bleicher, Christoph; Wagener, Rainer | Journal Article, Conference Paper |
| 2019 | Influence on the fatigue behavior of additively manufactured aluminum structures
Wagener, Rainer; Scurria, Matilde; Kaufmann, Heinz; Melz, Tobias | Journal Article, Conference Paper |
| 2019 | Investigations of passive wing technologies for load reduction
Krüger, W.R.; Dillinger, J.; Breuker, R. de; Haydn, K. | Journal Article |
| 2019 | KMU-innovativ - Verbundvorhaben: Ressourceneffizienz: Langzeitverfügbarkeit von elektronischen/elektromechanischen Bedieneinheiten (LEB)
Geertz, Guru; Pfaendner, Rudolf | Report |
| 2019 | Konstruktionsgrundlagen für schwingbelastete Bauteile - Erweiterung der Synthetischen Wöhlerlinien
Hell, Matthias; Wagener, Rainer; Richter, Torsten; Kleemann, Andreas; Bergmann, Joachim W.; Diemar, Andreas | Journal Article |
| 2019 | Machbarkeitsstudie zur Verwendung energieautarker adaptiver Schwingungstilger in technischen Anwendungen
Koch, Michael; Mayer, Dirk | Conference Paper |
| 2019 | Metal Polymer Connections: Laser-Induced Surface Enlargement Increases Joint Strength
Woitun, Dominic; Roderus, Michael; Bein, Thilo; Kroner, Elmar | Conference Paper |
| 2019 | Mit additiver Fertigung zu Losgröße 1
Brandt, Jonas Martin | Journal Article |
| 2019 | Modeling fatigue life of composite laminates: A statistical micro-mechanics approach
Laveuve, D.M.; Büter, A. | Journal Article |
| 2019 | Multiscale Structure and Microscopic Deformation Mechanisms of Gel-Spun Ultrahigh-Molecular-Weight Polyethylene Fibers
Balzano, L.; Coussens, B.; Engels, T.; Oosterlinck, F.; Vlasblom, M.; Werff, H. van der; Lellinger, D. | Journal Article |
| 2019 | Non-isothermal crystallization of polypropylene with sorbitol-type nucleating agents at cooling rates used in processing
Schawe, Jürgen E.K.; Budde, Felix; Alig, Ingo | Journal Article |
| 2019 | Novel amphiphilic block copolymer modifiers based on chain‐extended polyester for improved toughness of epoxy resins
Schneider, J.-P.; Just, B.; Döring, M. | Journal Article |
| 2019 | A Novel Method for Active Vibration Control of Steering Wheel
Kuwar, V.; Setia, S.; Pachhapurkar, N.; Pawar, P.R.; Santosh Jambhale, M.; Ramesh Saraf, M.; Millitzer, J.; Koch, T.; Herold, S. | Report |
| 2019 | Novel phosphinate‐containing zinc polyacrylate and its utilization as flame retardant for polyamides
Garth, K.; Döring, M.; Kraemer, R.; Roth, M.; Thomas, C. | Journal Article |
| 2019 | Operation Parameters and Structural Optimization of a One-way Spiral Casting Roller
Zhang, H.W.; Yin, S.G.; Liang, L.Z.; Chen, Q.Y.; Zhang, C.H.; Beinert, C. | Conference Paper |
| 2019 | Optimierte Lebensdaueranalysen von Gussbauteilen
Bleicher, Christoph | Journal Article |
| 2019 | Pareto-Optimierung eines Systems zur aktiven Schwingungsminderung mit Hilfe evolutionärer Algorithmen und Echtzeitsimulation am Beispiel eines semiaktiven Dämpfers
Mees, Valentin; Balzer, Louis; Lapiccirella, Giovanni; Millitzer, Jonathan | Conference Paper |
| 2019 | Phosphorus Containing Polyacrylamides as Flame Retardants for Epoxy-Based Composites in Aviation
Greiner, L.; Kukla, P.; Eibl, S.; Döring, M. | Journal Article |
| 2019 | Phosphorus-Containing Flame Retardants from Biobased Chemicals and their Application in Polyesters and Epoxy Resins
Sag, Jacob; Goedderz, Daniela; Kukla, Philipp; Greiner, Lara; Schönberger, Frank; Döring, Manfred | Journal Article |
| 2019 | Plastic Additives
Pfaendner, Rudolf | Book Article |
| 2019 | Poly (butyl acrylate)-graft-polystyrene synthesis by free-radical polymerization: Interplay between structure, morphology, mechanical, and optical properties
Fage, J.; Knoll, K.; Niessner, N.; Carstensen, O.; Schulz, T.; Malz, F.; Döring, M.; Schönberger, F. | Journal Article |
| 2019 | Polymer-induced metal diffusion during plastic processing: A reason for deposit formation
Sonnenberg, M.; Gustus, R.; Sedelmeier, S.; Wegewitz, L.; Höfft, O.; Wieser, J.; Maus-Friedrichs, W. | Journal Article |
| 2019 | Porous graphite as platform for the separation and characterization of synthetic polymers - an overview
Kot, David; Macko, Tibor; Arndt, Jan-Hendrik; Brüll, Robert | Journal Article |
| 2019 | Preload dependent material properties of lamination stacks for electric machines
Loos, Daniel; Barti, Endre; Wagener, Rainer; Melz, Tobias | Journal Article |
| 2019 | Quantitative FMEA and Functional Safety Metrics Evaluation in Bayesian Networks
Rauschenbach, Matthias; Nuffer, Jürgen | Conference Paper |
| 2019 | Richtungsabhängige Kennwerte
Roo, Tamara van; Dillenberger, Felix | Journal Article |
| 2019 | Schwingungsrisskorrosionsverhalten von Stählen in biogenen Kraftstoffen
Käfer, Sven; Schönborn, Steffen; Engler, T.; Melz, Tobias; Oechsner, M. | Conference Paper |
| 2019 | Simulation-based multi-objective optimization of a fuzzy controller for semi-active suspension
Balzer, Louis; Mees, Valentin; Millitzer, Jonathan; Lapiccirella, Giovanni | Conference Paper |
| 2019 | Simultaneous load and structural monitoring of a carbon fiber rudder stock: Experimental results from a quasi-static tensile test
Neuschwander, K.; Moll, J.; Memmolo, V.; Schmidt, M.; Bücker, M. | Journal Article |
| 2019 | Strukturelemente zur Berücksichtigung von Anisotropie und Inhomogenitäten in der rechnerischen Lebensdauerabschätzung von additiv gefertigten Bauteilen
Schnabel, Kai; Baumgartner, Jörg; Wagener, Rainer | Conference Paper |
| 2019 | A Study in Options to Improve Aerodynamic Profile of Heavy-Duty Vehicles in Europe
Hariram, Adithya; Koch, Thorsten; Mårdberg, Björn; Kyncl, Jan | Journal Article |
| 2019 | Studying the bivariate tacticity distribution of poly-1-octene using two-dimensional liquid chromatography coupled with NMR
Rode, K.; Malz, F.; Arndt, J.-H.; Macko, T.; Horchler, G.; Yu, Y.; Brüll, R. | Journal Article |
| 2019 | Synergistic flame retardant interplay of phosphorus containing flame retardants with aluminum trihydrate depending on the specific surface area in unsaturated polyester resin
Reuter, Jens; Greiner, Lara; Schönberger, Frank; Döring, Manfred | Journal Article |
| 2019 | Synergy between melamine cyanurate, melamine polyphosphate and aluminum diethylophosphinate in flame retarded thermoplastic polyurethane
Sut, Aleksandra; Metzsch-Zilligen, Elke; Großhauser, Michael; Pfaendner, Rudolf; Schartel, Bernhard | Journal Article |
| 2019 | Tadellos gefügt
Zeidler-Finsel, Anke | Journal Article |
| 2019 | Two control strategies for semi-active load path redistribution in a load-bearing structure
Gehb, Christopher Maximilian; Platz, Roland; Melz, Tobias | Journal Article |
| 2019 | Uncertainty quantification in the mathematical modelling of a suspension strut using Bayesian inference
Mallapur, Shashidhar; Platz, Roland | Journal Article |
| 2019 | Urban EV - Lebensdaueruntersuchungen an einem Elektro-Stadtfahrzeug mit Schwenkachse
Voigt, Thorsten; Lipp, Klaus; Melz, Tobias | Conference Paper |
| 2019 | Virtuelle Lebensdaueranalyse von Leichtbau-Strukturen unter Berücksichtigung des Steifigkeitsverhaltens im Betrieb
Rösch, Peter | Dissertation |
| 2019 | Werkstoffbasierter Festigkeitsnachweis für elektrische Antriebskomponenten
Loos, Daniel | Dissertation |
| 2019 | Werkstoffverhalten von Gussbauteilen
Bergner, Kim Martine | Journal Article |
| 2019 | Wireless Sensor Networks and Energy Harvesting for Energy Autonomous Smart Structures
Grasböck, Lukas; Humer, Alexander; Nader, Manfred; Schagerl, Martin; Mayer, Dirk; Misol, Malte; Humer, Christoph; Herold, Sven; Monner, Hans Peter | Conference Paper |