Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Development of a rotational energy harvesting tuned vibration absorber for torsional vibrations
Infante, Francesco
: Melz, Tobias (Berichterstatter); Rinderknecht, Stephan (Mitberichterstatter)
Dissertation
2019Effects of Surface Preparation, Support Structures and Build Orientation on the Cyclic Stress-Strain Behavior of Inconel®718 Produced by SLM
Scurria, Matilde; Möller, Benjamin; Wagener, Rainer; Pena, Jose; Bein, Thilo
Report
2019Elastomere Sensorwerkstoffe zur Digitalisierung industrieller Prozesse
Kaal, William; Rieß, Sebastian
Journal Article
2019EMPT verbindet Stahl und Alu so fest wie herkömmlich geschweißt
Baumgartner, Jörg
Journal Article
2019High performance liquid chromatography of polyolefin plastomers/elastomers (ethylene/1-octene copolymers) - Comparison of different solvent systems
Arndt, Jan-Hendrik; Brüll, Robert; Macko, Tibor; Garg, Praveen; Tacx, Jacques C.J.F.
Journal Article
2019Hochfrequente Charakterisierung und Modellierung von Elastomerlagern
Kaal, William; Rieß, Sebastian
Journal Article
2019In-situ X-ray computed tomography of composites subjected to fatigue loading
Wagner, Peter; Schwarzhaupt, Oliver; May, Michael
Journal Article
2019Influence of annealing conditions on elastic and dielectric properties of P(VDF-TrFE) copolymer and its composites
Belovickis, Jaroslavas; Werne, Lisa; Silibin, Maxim; Samulionis, Vytautas; Lellinger, Dirk; Oehler, Harald; Banys, Juras; Sysa, Artem; Nekludov, Kapiton; Shvartsman, Vladimir V.; Alig, Ingo
Journal Article
2019Non-isothermal crystallization of polypropylene with sorbitol-type nucleating agents at cooling rates used in processing
Schawe, Jürgen E.K.; Budde, Felix; Alig, Ingo
Journal Article
2019Synergistic flame retardant interplay of phosphorus containing flame retardants with aluminum trihydrate depending on the specific surface area in unsaturated polyester resin
Reuter, Jens; Greiner, Lara; Schönberger, Frank; Döring, Manfred
Journal Article
2019Synergy between melamine cyanurate, melamine polyphosphate and aluminum diethylophosphinate in flame retarded thermoplastic polyurethane
Sut, Aleksandra; Metzsch-Zilligen, Elke; Großhauser, Michael; Pfaendner, Rudolf; Schartel, Bernhard
Journal Article
2019Tadellos gefügt
Zeidler-Finsel, Anke
Journal Article
2019Two control strategies for semi-active load path redistribution in a load-bearing structure
Gehb, Christopher Maximilian; Platz, Roland; Melz, Tobias
Journal Article
2019Uncertainty quantification in the mathematical modelling of a suspension strut using Bayesian inference
Mallapur, Shashidhar; Platz, Roland
Journal Article
2018Active vibration reduction of ship propulsion systems
Bartel, Torsten; Herold, Sven; Infante, Francesco; Käsgen, Johannes; Matthias, Michael; Millitzer, Jonathan; Perfetto, Sara
Conference Paper
2018An active-system approach for eliminating the wolf note on a cello
Neubauer, Philipp; Tschesche, Johannes; Bös, Joachim; Melz, Tobias; Hanselka, Holger
Journal Article
2018Additives: Secondary raw materials of the future
Schultheis, C.; Metzsch-Zilligen, E.; Pfaendner, R.
Journal Article
2018Alternative formulations of standard criteria
Kolupaev, V.A.
Book Article
2018Analyse des Schwingfestigkeitsverhaltens von drossbehaftetem Gusseisen mit Kugelgraphit
Bleicher, Christoph
Journal Article
2018Anwendungspotential von Laserstrahl- und Laserhybridschweißnähten für Stumpfstoßverbindungen ultrahochfester Feinkornbaustähle
Seyfried, Benjamin; Möller, Benjamin; Knödel, Peter; Wagener, Rainer; Ummenhofer, Thomas; Melz, Tobias
Conference Paper
2018Applications
Kolupaev, V.A.
Book Article
2018Betriebsfestigkeit lasergeschweißter Stumpfnähte für den Einsatz in Kranstrukturen am Beispiel des Feinkornbaustahls S1100QL
Möller, Benjamin; Seyfried, Benjamin; Wagener, Rainer; Knödel, Peter; Melz, Tobias; Ummenhofer, T.
Conference Paper
2018Bewertung der Schallabstrahlung dünnwandiger Strukturen anhand der Analyse der Strukturintensität
Schaal, Clarissa; Groba, Peter; Bös, Joachim; Melz, Tobias
Conference Paper
2018Characterization of the chemical composition distribution of polyolefin plastomers/elastomers (ethylene/1-octene copolymers) and comparison to theoretical predictions
Arndt, Jan-Hendrik; Brüll, Robert; Macko, Tibor; Garg, Praveen; Tacx, Jacques
Journal Article
2018Charakterisierung variierter Randzonenzustände an Gussbauteilen und Bewertung des Einflusses auf die Ermüdungsfestigkeit
Bergner, Kim Martine; Bleicher, Christoph; Wagener, Rainer; Melz, Tobias
Conference Paper
2018Combination of material characterization and cyclic fatigue testing for investigation of elastomer aging
Lellinger, Dirk; Kroth, Thomas; Reinhardt, Marc; Bitsch, Thorsten; Kühne, Kai; Rode, Karsten; Malz, Frank; Wallmichrath, Marc; Alig, Ingo
Book Article
2018A comparative study of various joining techniques fatigue behaviour focusing on stiffness degradation
Rösch, Peter; Bruder, Thomas; Bein, Thilo
Journal Article, Conference Paper
2018Comparison of strength criteria based on the measurements on concrete
Kolupaev, V.A.; Yu, M.-H.; Altenbach, H.; Bolchoun, A.
Journal Article
2018Conditions and assumptions of strength criteria
Kolupaev, V.A.
Book Article
2018Correlation between comprehensive 2D liquid chromatography and Monte Carlo simulations for branched polymers
Apel, Nico; Ramakrishnan, Vaidyanath; Uliyanchenko, Elena; Moyses, Stephan; Wold, Christian; Macko, Tibor; Brüll, Robert
Journal Article
2018Crack propagation in PE-HD induced by environmental stress cracking (ESC) analyzed by several imaging techniques
Schilling, Markus; Niebergall, Ute; Alig, Ingo; Oehler, Harald; Lellinger, Dirk; Meinel, Dietmar; Böhning, Martin
Journal Article
2018Crash and durability of aluminum and mixed steel aluminum joints made by electromagnetic pulse welding
Huberth, F.; Klitschke, S.; Gall, M.; Sommer, S.; Schnabel, K.; Baumgartner, J.
Conference Paper
2018Criteria of equivalent stress concept
Kolupaev, V.A.
Book Article
2018Critical distance approach for the fatigue strength assessment of magnesium welded joints in contrast to Neuber's effective stress method
Karakaş, Ö.; Zhang, G.; Sonsino, C.M.
Journal Article
2018Definition of a loading scenario and experimental verification on a material handlers load arm
Herbert, Andreas; Käsgen, Johannes
Conference Paper
2018Design development of rotational energy harvesting vibration absorber (R-EHTVA)
Infante, F.; Kaal, W.; Perfetto, S.; Herold, S.
Conference Paper
2018Development and implementation of a multi-channel active control system for the reduction of road induced vehicle interior noise
Gäbel, Gunnar; Millitzer, Jonathan; Atzrodt, Heiko; Herold, Sven; Mohr, Andreas
Journal Article
2018Digitaler Zwilling eines servohydraulischen Prüfstands zur Durchführung virtueller Prüfungen an mechatronischen Wankstabilisatoren
Landersheim, Volker; Fischer, Felix; Möller, Ricardo; Huang, Ha; Awad, Hasan
Conference Paper
2018Dimensionless values for comparison
Kolupaev, V.A.
Book Article
2018Effect of static axial loads on the lateral vibration attenuation of a beam with piezo-elastic supports
Götz, Benedict; Platz, Roland; Melz, Tobias
Journal Article
2018Effect of the material modeling and the experimental material characterisation on fatigue life estimation within strain-based fatigue assessment approaches
Hell, Matthias; Wagener, Rainer; Kaufmann, Heinz; Melz, Tobias
Journal Article
2018Efficient and parametric digital twins for system engineering applications
Tamm, Christoph
Conference Paper
2018Effiziente phosphorhaltige Stabilisatoren auf Basis von Diphenyl-amin und heterocyclischer Diphenylamin-Derivate
Briesenick, Max; Ciesielski, Michael; Pfaendner, Rudolf
Patent
2018Einfluss der metallurgischen Eigenschaften der Gesenkteilungsebene auf die Schwingfestigkeit warm massivumgeformter Stahlbauteile
Wagener, Rainer; Scurria, Matilde; Möller, Benjamin; Schuster, J.
Conference Paper
2018Einflüsse auf das zyklische Spannungs-Dehnungsverhalten von additiv gefertigten Strukturen aus AlSi10Mg
Wagener, Rainer; Scurria, Matilde; Möller, Benjamin
Conference Paper
2018Einflüsse der Oberflächenbehandlung und Aufbaurichtung auf das zyklisch Spannungs-Dehnungs-Verhalten von additiv gefertigten Strukturen aus Inconel 718
Scurria, Matilde; Möller, Benjamin; Wagener, Rainer; Melz, Tobias
Conference Paper
2018Electrochemical characterization of automotive aluminum alloys regarding their corrosion fatigue behavior
Engler, T.; Andersohn, G.; Oechsner, M.; Araújo, F.D. de; Kaufmann, H.; Melz, T.
Journal Article
2018Enhanced lightweight design by composites - results of the EU project ENLIGHT
Mayer, Dirk; Bein, Thilo; Buff, Hendrik; Götz, Benedict; Schwarzhaupt, Oliver; Spancken, Dominik
Journal Article
2018Entwicklung einer robusten Berechnungsmethode zur Bestimmung der Strukturintensität von dünnwandigen, gekrümmten Bauteilen unter Zuhilfenahme virtueller Messdaten
Kleinfeller, Nikolai; Bös, Joachim; Melz, Tobias
Conference Paper
2018Entwicklung passiver und aktiver Maßnahmen zur Minderung der Schalltransmission durch Doppelglas-Fensterscheiben
Klaus, Tim Bastian
: Melz, Tobias (Berichterstatter); Beidl, Christian (Mitberichterstatter)
Dissertation
2018Equivalent stress concept for limit state analysis
Kolupaev, Vladimir, A.
Book
2018Estimation of power input and output of structures using structural intensity measurements
Groba, Peter; Ebert, Johannes; Stoewer, Torsten; Bös, Joachim; Melz, Tobias
Conference Paper
2018Experimental characterisation of a flat dielectric elastomer loudspeaker
Rustighi, Emiliano; Kaal, William; Herold, Sven; Kubbara, Ahmed
Journal Article
2018Experimentelle und numerische Ermittlung der Verbundsteifigkeiten und thermischen Ausdehnung von Kupferwicklungen
Loos, D.; Barti, E.; Wagener, R.; Melz, Tobias
Conference Paper
2018Experimentelle Untersuchung der Ähnlichkeit skalierter Plattenstrukturen
Adams, Christian; Bös, Joachim; Melz, Tobias
Conference Paper
2018Experiments and equipment
Kolupaev, V.A.
Book Article
2018Fatigue assessment of EMPT-welded joints using the reference radius concept
Baumgartner, J.; Schnabel, K.; Huberth, F.
Journal Article, Conference Paper
2018Fatigue behaviour of aluminium tube crimp connections applying the electromagnetic pulse technology
Lipp, Klaus; Schaefer, R.; Horwatitsch, D.
Journal Article, Conference Paper
2018Fatigue life curve - a continuous Wöhler curve from LCF to VHCF
Wagener, Rainer; Melz, Tobias
Journal Article
2018Fitting of criteria
Kolupaev, V.A.
Book Article
2018Formulations of classical strength hypotheses
Kolupaev, V.A.
Book Article
2018Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit. Jahresbericht 2017
 
Annual Report
2018Frequency and temperature dependent stiffness and damping properties of reduced viscoelastic structures using component mode synthesis (CMS)
Somesan, Vlad; Barti, Endre; Bein, Thilo
Report
2018Gain-scheduled H∞ buckling control of a circular beam-column subject to time-varying axial loads
Schäffner, Maximilian; Platz, Roland
Journal Article
2018Generalized cavitation criterion for poro-hyperelastic materials
Drass, M.; Kolupaev, V.; Rosendahl, P.L.; Schneider, J.; Becker, W.
Conference Paper
2018Generalized pressure-insensitive criteria
Kolupaev, V.A.
Book Article
2018Generalized pressure-sensitive criteria
Kolupaev, V.A.
Book Article
2018Grundlagen für die Bemessung druckwasserexponierter Komponenten unter Berücksichtigung werkstoffspezifischer Eigenschaften und Schädigungsmechanismen
Schmiedl, Tobias; Melz, Tobias
Conference Paper
2018Implementation of a modular model for active engine mounts and coupling with a reduced model for full-vehicle NVH-simulation
Grimm, A.; Finger, Karsten; Stoll, G.; Atzrodt, H.; Herold, S.
Conference Paper
2018Influence of different load histories on the cyclic material behavior of nodular cast iron for thick-walled application
Bleicher, C.
Journal Article
2018Influence of salt corrosion on the fatigue behaviour of aluminium alloys for chassis components under constant and variable amplitude loading
Duarte de Araújo, F.; Engler, T.; Andersohn, G.; Oechsner, M.; Kaufmann, H.; Schönborn, S.; Melz, T.
Journal Article, Conference Paper
2018Innovative testing process for electric powertrains
Nickel, D.; Stelter, E.; Sültrop, C.; Mittmann, W.; Heiduczek, T.; Hohenner, H.
Conference Paper
2018Introduction
Kolupaev, V.A.
Book Article
2018Iron Oxide Superparticles with Enhanced MRI Performance by Solution Phase Epitaxial Growth
Kluenker, M.; Tahir, M.N.; Dören, R.; Deuker, M.; Komforth, P.; Plana-Ruiz, S.; Barton, B.; Shylin, S.I.; Ksenofontov, V.; Panthöfer, M.; Wiesmann, N.; Herzberger, J.; Möller, A.; Frey, H.; Brieger, J.; Kolb, U.; Tremel, W.
Journal Article
2018Isogonal and isotoxal hexagons as extremal yield figures
Altenbach, H.; Rosendahl, P.L.; Becker, W.; Kolupaev, V.A.
Abstract
2018Lightweight Automobiles ALLIANCE Project: First Results of Environmental and Economic Assessment from a Life-Cycle Perspective
Delogu, Massimo; Pero, Francesco del; Zanchi, Laura; Ierides, Marcos; Fernandez, Violeta; Seidel, Kristian; Thirunavukkarasu, Dinesh; Bein, Thilo
Report
2018Eine Methode zur Festigkeitsbeurteilung von laserstrahlgeschweißten Magnesium-Verbindungen unter mehrachsigen Beanspruchungen mit konstanten und variablen Amplituden
Bolchoun, Alexandre
: Melz, Tobias (1. Gutachter); Sonsino, Cetin Morris (2. Gutachter); Schäfer, M. (3. Gutachter)
Dissertation
2018Modellbasierte Gleitzustandsansätze zur Regelung von Ruckelschwingungen in Fahrzeugantriebssträngen
Yousif, Leonard
Dissertation
2018Monomere in den Adern
Klein, Roland; Popzyk, Marie-Isabel; Burlon, Konrad; Wennemann, Katharina; Karl, Janis; Köhler, Thomas; Wischnowski, Marko; Gries, Thomas
Journal Article
2018Monomers coursing through the veins
Klein, R.; Popzyk, M.-I.; Burlon, K.; Wennemann, K.; Karl, J.; Köhler, T.; Wischnowski, M.; Gries, T.
Journal Article
2018Multi-surface criteria
Kolupaev, V.A.
Book Article
2018New developments in flame-retardant polystyrene foams
Döring, M.
Conference Paper
2018Novel N-phosphorylated iminophosphoranes based on 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide
Weinert, Michael; Fuhr, Olaf; Döring, Manfred
Journal Article
2018Novel organophosphorus flame retardants and their synergistic application in novolac epoxy resin
Schmidt, Christian; Ciesielski, Michael; Greiner, Lara; Döring, Manfred
Journal Article
2018Nucleation activity at high supercooling: Sorbitol-type nucleating agents in polypropylene
Schawe, Jürgen E.K.; Budde, Felix; Alig, Ingo
Journal Article
2018On cavitation in transparent structural silicone adhesive: TSSA
Drass, Michael; Kolupaev, Vladimir A.; Schneider, Jens; Kolling, Stefan
Journal Article
2018Online listening test to evaluate the gear mesh noise of inequidistant gearings
Neubauer, Philipp; Bös, Joachim; Melz, Tobias
Conference Paper
2018Optimization of a vibration absorber with piezoelectric energy harvesting capabilities
Perfetto, Sara
: Melz, Tobias (Berichterstatter); Rinderknecht, Stephan (Mitberichterstatter)
Dissertation
2018Passive, adaptive, active vibration control, and integrated approaches
Mayer, Dirk; Herold, Sven
Book Article
2018Phosphorus Containing Polymers as Flame Retardants
Döring, Manfred
Abstract
2018Preliminary acousto-ultrasonic investigation for multi-parameter transducer self-diagnostic system in composites
Memmolo, V.; Park, Y.J.; Lilov, M.; Monaco, E.; Ricci, F.
Journal Article
2018Prognostics and health monitoring for ECU based on piezoresistive sensor measurements
Palczynska, Alicja
: Melz, Tobias (Berichterstatter); Rinderknecht, Stephan (Mitberichterstatter)
Dissertation
2018Quantification of uncertainty in the mathematical modelling of a multivariable suspension strut using bayesian interval hypothesis-based approach
Mallapur, Shashidhar; Platz, Roland
Conference Paper
2018Rapid mass calorimeter as a high-throughput screening method for the development of flame-retarded TPU
Sut, Aleksandra; Metzsch-Zilligen, Elke; Großhauser, Michael; Pfaendner, Rudolf; Schartel, Bernhard
Journal Article
2018Recent developments in hardware-in-the-loop testing
Millitzer, Jonathan; Mayer, Dirk; Henke, Christian; Jersch, Torben; Tamm, Christoph; Michael, Jan; Ranisch, Christopher
Conference Paper
2018Rechnerische Lebensdauerabschätzung mit Berücksichtigung der Ergebnisse aus Umformsimulationen
Störzel, Klaus; Kraemer, F.; Bernhard, Julian; Oechsner, M.
Conference Paper
2018Scaling laws obtained from a sensitivity analysis and applied to thin vibrating structures
Adams, Christian; Bös, Joachim; Slomski, Elena M.; Melz, Tobias
Journal Article
2018Schwingfestigkeitsbewertung von additiv gefertigten metallischen Bauteilen
Schnabel, Kai; Baumgartner, Jörg; Choccia, Andreas
Conference Paper
2018Sekundärrohstoffe der Zukunft
Schultheis, Christoph; Metzsch-Zilligen, Elke; Pfaendner, Rudolf
Journal Article
2018Separation of branched Poly(bisphenol A carbonate) structures by solvent gradient at near-critical conditions and two-dimensional liquid chromatography
Apel, Nico; Uliyanchenko, Elena; Moyses, Stephan; Rommens, Stijn; Wold, Christian; Macko, Tibor; Brüll, Robert
Journal Article
2018Strength criteria for concrete and their comparison with experiments
Altenbach, Holm; Kolupaev, Vladimir
Conference Paper
2018Structural health monitoring of composite aerospace structures with acoustic emission
Lehmann, Martin; Büter, Andreas; Schwarzhaupt, Oliver; Contell Asins, Conchin
Conference Paper
2018Summary and outlook
Kolupaev, V.A.
Book Article
2018TRANSFORMERS - Configurable and Adaptable Trucks and Trailers for Optimal Transport
Adams, Paul; Nitzsche, Gunter; Löfstrand, Sofia; Selas, A.; Arts, G.; Adesiyun, A.; Wagner, S.; Koch, T.; Jacob, B.; Schmidt, F.; Billiet, M.; Hariram, A.; Queckenstedt, B.; Koornneef, G.; Zweep, C. van der; Bertens, T.; Hillbrand, B.
Conference Paper
2018Uncertainty quantification in case of imperfect models: A non-bayesian approach
Kohler, Michael; Krzyzak, Adam; Mallapur, Shashidhar; Platz, Roland
Journal Article
2018Visualization methods
Kolupaev, V.A.
Book Article
2018Visualization of standard criteria
Kolupaev, V.A.
Book Article
2018Welche Materialien stabil bleiben
Schultheis, Christoph; Großhauser, Michael; Metzsch-Zilligen, Elke; Pfaendner, Rudolf
Journal Article
2018Wie wirksam sind Haftvermittler?
Arndt, Jan-Hendrik; Brüll, Robert
Journal Article
2018Zielgrößenbestimmung zur Durchführung einer Sensitivitätsanalyse bei der Absorptionsgradmessung im Kundt’schen Rohr
Wenzel, Sören; Grebel, Antje; Slomski-Vetter, Elena; Bös, Joachim; Melz, Tobias
Conference Paper
2018Zur Beurteilung der Betriebsfestigkeit von Gusseisen mit Kugelgraphit unter Beanspruchungszeitfunktionen mit Überlasten
Bleicher, Christoph; Kaufmann, Heinz; Wagener, Rainer; Melz, Tobias
Conference Paper