Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2020Accelerated thermal aging of thermoplastic materials for the motor compartment: Characterization, degradation model and lifetime prediction
Lellinger, Dirk; Alig, Ingo; Oehler, Harald; Rode, Karsten; Malz, Frank; Herkenrath, Lena Mavie; Youn, Jee young
Book Article
2020Affordable Multi-Material Lightweight Design - Selected Results of the H2020 Project ALLIANCE
Bein, Thilo; Mbang, Sama; Thirinavukkarasu, Dinesh; Kerschbaum, Martin; Bassan, Daniele; Michler, Thorsten; Meschke, Jens; Jonasson, Paul; Ierides, Marcos
Presentation
2020Analysis and design of efficient multiple-input multiple-output broadband active vibration control systems
Lapiccirella, Giovanni
: Melz, T.; Berkhoff, A.
Dissertation
2020Applying Uncertainty Quantification to Structural Systems: Parameter Reduction for Evaluating Model Complexity
Locke, Robert; Kupis, Shyla; Gehb, Christopher M.; Platz, Roland; Atamturktur, Sez
Conference Paper
2020Assessing the Influence of Different Forging Process Parameters on the Local Fatigue Properties of a Precipitation Hardening Ferritic-Pearlitic Steel
Hell, M.; Wagener, R.; Melz, T.
Conference Paper
2020Bayesian Inference Based Parameter Calibration of the LuGre-Friction Model
Gehb, C.M.; Atamturktur, S.; Platz, R.; Melz, T.
Journal Article
2020Deriving the Structural Fatigue Behavior of Additively Manufactured Components
Wagener, R.; Hell, M.; Scurria, M.; Bein, T.
Conference Paper
2020Detection of Pin Failure in Carbon Fiber Composites Using the Electro-Mechanical Impedance Method
Moll, Jochen; Schmidt, Matthias; Käsgen, Johannes; Mehldau, Jörg; Bücker, Marcel; Haupt, Felix
Journal Article
2020Development of air-hardening martensitic forging steels
Gramlich, A.; Schmiedl, T.; Schönborn, S.; Melz, T.; Bleck, W.
Journal Article
2020Efficient flame retardant interplay of unsaturated polyester resin formulations based on ammonium polyphosphate
Reuter, J.; Greiner, L.; Kukla, P.; Döring, M.
Journal Article
2020A Fatigue Life Approach for Additively Manufactured Structures
Wagener, R.; Möller, B.; Scurria, M.; Bein, T.
Conference Paper
2020Fatigue of brazed joints made of X5CrNi18-10 and Cu110 and derivation of reliable assessment approaches
Baumgartner, J.; Tillmann, W.; Bobzin, K.; Öte, M.; Wiesner, S.; Sievers, N.
Journal Article
2020Fatigue Strength Under Spectrum Loading
Heim, R.
Book Article
2020Flame retardant polyester by combination of organophosphorus compounds and an NOR radical forming agent
Goedderz, Daniela; Weber, Lais; Markert, Daniel; Schießer, Alexander; Fasel, Claudia; Riedel, Ralf; Altstädt, Volker; Bethke, Christian; Fuhr, Olaf; Puchtler, Florian; Breu, Josef; Döring, Manfred
Journal Article
2020Flame-retardant hybrid materials based on expandable polystyrene beads
Reuter, J.; Standau, T.; Altstädt, V.; Döring, M.
Journal Article
2020Fraunhofer LBF - Macht Schluss mit Brummen und Dröhnen
Rieß, Sebastian; Hansmann, Jan; Kaal, William
Journal Article
2020Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit. Jahresbericht 2019
 
Annual Report
2020Hochglanzprodukte leichter entformen
Steinhoff, Bernd; Kothe, Hans; Keunecke, Martin; Burmeister, Frank; Meyer, Frank; Zosel, Jürgen
Journal Article
2020Improving the flame‐retardant property of bottle‐grade PET foam made by reactive foam extrusion
Bethke, Christian; Goedderz, Daniela; Weber, Lais; Standau, Tobias; Döring, Manfred; Altstädt, Volker
Journal Article
2020In-depth characterization of polyolefin plastomers/elastomers (ethylene/1-octene copolymers) through hyphenated chromatographic techniques
Arndt, Jan-Hendrik; Brüll, Robert; Macko, Tibor; Garg, P.; Tacx, Jacques C.J.F.
Journal Article
2020The influence of coverage for high frequency mechanical impact treatment of different steel grades
Schubnell, J.; Eichheimer, C.; Ernould, C.; Maciolek, A.; Rebelo-Kornmeier, J.; Farajian, M.
Journal Article
2020Influence of the optical measurement technique and evaluation approach on the determination of local weld geometry parameters for different weld types
Schubnell, J.; Jung, M.; Le, C.H.; Farajian, M.; Braun, M.; Ehlers, S.; Fricke, W.; Garcia, M.; Nussbaumer, A.; Baumgratner, J.
Journal Article
2020Influencing Factors for Fatigue Strength
Heim, R.
Book Article
2020Integrale Betrachtung zur Lebensdauerabschätzung von Stumpfnähten im Bereich der Kurzzeitschwingfestigkeit
Möller, Benjamin
: Melz, T.; Sonsino, C.M.; Vormwald, M.
Dissertation
2020Investigation of flame retarded polypropylene by high-speed planar laser-induced fluorescence of OH radicals combined with a thermal decomposition analysis
Geschwindner, Christopher; Goedderz, Daniela; Li, Tao; Köser, Jan; Fasel, Claudia; Riedel, Ralf; Altstädt, Volker; Bethke, Christian; Puchtler, Florian; Breu, Josef; Döring, Manfred; Dreizler, Andreas; Böhm, Benjamin
Journal Article
2020Load and structural health monitoring of a scaled CFRP rudder stock using electro-mechanical impedance technique
Moll, Jochen; Schmidt, Matthias; Käsgen, Johannes; Mehldau, Jörg; Bücker, Marcel; Haupt, Felix
Conference Paper
2020A method for the strain rate dependent correction for control type of fatigue tests
Geilen, Max Benedikt; Klein, M.; Oechsner, Matthias; Kaffenberger, M.; Störzel, Klaus; Melz, Tobias
Journal Article
2020Monitoring ermöglicht optimale Produktqualität
Park, Ye Ji
Journal Article
2020Motivation
Heim, R.
Book Article
2020Multiaxial fatigue life response depending on proportionality grade between normal and shear strains/stresses and material ductility
Sonsino, Cetin Morris
Journal Article
2020A novel class of high molecular weight multifunctional antioxidants for polymers based on thiol-ene click reaction
Fischer, Johannes; Metzsch-Zilligen, Elke; Zou, Mingyi; Pfaendner, Rudolf
Journal Article
2020Numerical and experimental validation of residual stresses of laser-welded joints and their influence on the fatigue behaviour
Sepe, R.; Wiebesiek, J.; Sonsino, C.M.
Journal Article
2020On the anisotropic plastic behaviour of short fibre reinforced thermoplastics and its description by phenomenological material modelling
Dillenberger, Felix
Book
2020On the use of a fictitious notch radius equal to 0.3 mm to design against fatigue welded joints made of wrought magnesium alloy AZ31
Karakaş, Ö.; Baumgartner, J.; Susmel, L.
Journal Article
2020Operating Life Analysis
Heim, R.
Book Article
2020Porous graphite as stationary phase for the chromatographic separation of polymer additives - determination of adsorption capability by Raman spectroscopy and physisorption
Kot, David; Zou, Mingyi; Brunnengräber, Kai; Arndt, Jan-Hendrik; Macko, Tibor; Etzold, Bastian J.M.; Brüll, Robert
Journal Article
2020Quantification and Evaluation of Parameter and Model Uncertainty for Passive and Active Vibration Isolation
Lenz, Jonathan; Platz, Roland
Conference Paper
2020Solid State Fluorination on the Minute Scale: Synthesis of WO3-x Fx with Photocatalytic Activity
Lange, M.A.; Krysiak, Y.; Hartmann, J.; Dewald, G.; Cerretti, G.; Tahir, M.N.; Panthöfer, M.; Barton, B.; Reich, T.; Zeier, W.G.; Mondeshki, M.; Kolb, U.; Tremel, W.
Journal Article
2020Structural Durability
Heim, R.
Book Article
2020Structural Durability. Methods and Concepts
Heim, Rüdiger
Book
2020A Summary of Piezoelectric Energy Harvesting for Autonomous Smart Structures
Grasböck, Lukas; Reininger, Alexander; Nader, Manfred; Humer, Alexander; Schagerl, Martin; Misol, Malte; Monner, Hans Peter; Herold, Sven; Mayer, Dirk
Conference Paper
2020Synthesis of novel bisphosphorylimides based on Staudinger reaction
Weber, Lais; Weinert, Michael; Goedderz, Daniela; Fuhr, Olaf; Döring, Manfred
Journal Article
2020Synthesis of Novel Polymeric Acrylate-Based Flame Retardants Containing Two Phosphorus Groups in Different Chemical Environments and their Influence on the Flammability of Poly (Lactic Acid)
Sag, Jacob; Kukla, Philipp; Goedderz, Daniela; Roch, Hendrik; Kabasci, Stephan; Döring, Manfred; Schönberger, Frank
Journal Article
2020Verfahren und Produktionsanlage zur Verarbeitung eines Werkstoffs
Perko, Leonhard; Steinhoff, Bernd
Patent
2020Zur rechnerischen Lebensdauerabschätzung für Faser-Kunststoff-Verbunde
Laveuve, Dominik Maximilian
: Melz, T.; Becker, W.
Dissertation
2019About a Digital Twin for the Fatigue Approach of Additively Manufactured Components
Wagener, Rainer; Scurria, Matilde; Bein, Thilo
Conference Paper
2019Accurate determination of the layer thickness of a multilayer polymer film by non-invasive multivariate confocal Raman microscopy
Zou, M.Y.; Barton, B.; Geertz, G.; Brüll, R.
Journal Article
2019Additive Fertigung von integrierten Aktoren und Sensoren
Bartel, Torsten; Röglin, Tobias
Book Article
2019Advanced measurements and model update of an automotive turbochargerwith full-floating journal bearings
Leichtfuß, Sebastian; Kreschel, Martin; Durbiano, Loic; Dielenschneider, Tobias; Nordmann, Rainer; Atzrodt, Heiko; Pilotto, Rafael; Schiffer, Heinz-Peter
Conference Paper
2019Akustische Anregungsquellen in hochintegrierten Leistungselektroniken mobiler Antriebe
Herrnberger, Maximilian; Hülsebrock, Moritz; Lichtinger, R.; Atzrodt, Heiko
Conference Paper
2019Anordnung mit einer Seilklemme und wenigstens einem Seil
Kraus, Roman
Patent
2019Assessing Model Form Uncertainty for a Suspension Strut using Gaussian Processes
Feldmann, Robert; Platz, Roland
Conference Paper
2019Assessment of the Fatigue Strength of Thick-Walled Nodular Cast Iron with Dross
Bleicher, Christoph; Wagener, Rainer; Kaufmann, Heinz; Tschuncky, Ralf; Weber, Fabian; Hettich, Philipp; Buchmüller, Steffen; Berg, Hans W.
Journal Article, Conference Paper
2019Benchmarking Workshop on (active) vibration damping
Reischl, Daniel; Mayer, Dirk; Herold, Sven; Mrak, Branimir; Venkatesan, S.K.; Berger, Wolfgang; Nader, Manfred; Depraetere, Bruno
Conference Paper
2019Beschreibung des zyklischen Verhaltens eines Strukturelementes zur Lebensdauerabschätzung von additiv gefertigten Bauteilen
Wagener, Rainer; Scurria, Matilde; Möller, Benjamin
Conference Paper
2019Characterization of the Cyclic Material Behavior of AlSi10Mg and Inconel® 718 produced by SLM
Scurria, Matilde; Möller, Benjamin; Wagener, Rainer; Bein, Thilo
Conference Paper
2019Comparison of constrained parameterisation strategies for aerodynamic optimisation of morphing leading edge airfoil
Magrini, A.; Benini, E.; Ponza, R.; Wang, C.; Khodaparast, H.H.; Friswell, M.I.; Landersheim, V.; Laveuve, D.; Contell Asins, C.
Journal Article
2019Conceptual-level evaluation of a variable stiffness skin for a morphing wing leading edge
Wang, C.; Haddad Khodaparast, H.; Friswell, M.I.; Magrini, A.; Ponza, R.; Benini, E.; Landersheim, V.; Laveuve, D.; Contell Asins, C.
Journal Article
2019Cyclic Material Behavior of Ultra‐High‐Strength Fine‐Grained Steels and Welds for the Application in Fatigue Assessment Approaches
Möller, Benjamin; Wagener, Rainer; Melz, Tobias
Journal Article, Conference Paper
2019Deriving strain based local structural element concept for the fatigue assessment of additively manufactured structures
Wagener, R.; Möller, B.; Melz, T.; Scurria, M.
Report
2019Description of the cyclic material behaviour of aluminium wrought alloys as basis for a digital twin
Wagener, Rainer; Maciolek, Andreas; Kaufmann, Heinz
Journal Article
2019Design and Optimization of Mechatronic Systems Using a Holistic and Parametric Simulation Approach
Tamm, Christoph; Perfetto, Sara
Journal Article, Conference Paper
2019Development of a rotational energy harvesting tuned vibration absorber for torsional vibrations
Infante, Francesco
Dissertation
2019Digitale Vernetzung für Leichtbau-optimierte Gussbauteile
Bleicher, Christoph
Journal Article
2019Effect of Laser Beam Welding on the Cyclic Material Behavior of the Press-hardened Martensitic Chromium Steel X46Cr13
Möller, Benjamin; Wagener, Rainer; Melz, Tobias
Journal Article, Conference Paper
2019Effect of the Surface Finish on the Cyclic Behavior of Additively Manufactured AlSi10Mg
Scurria, Matilde; Möller, Benjamin; Wagener, Rainer; Melz, Tobias
Conference Paper
2019Effects of different heat treatments on the cyclic material behavior of additively manufactured Inconel®718
Scurria, Matilde; Möller, Benjamin; Wagener, Rainer; Bein, Thilo
Journal Article, Conference Paper
2019Effects of Surface Preparation, Support Structures and Build Orientation on the Cyclic Stress-Strain Behavior of Inconel®718 Produced by SLM
Scurria, Matilde; Möller, Benjamin; Wagener, Rainer; Pena, Jose; Bein, Thilo
Report
2019Einfluss biogener Kraftstoffe auf das Ermüdungsverhalten von Stählen
Käfer, Sven; Melz, Tobias; Engler, Tom; Oechsner, Matthias
Journal Article
2019Einfluss des Korrosionsverhaltens von Aluminiumlegierungen auf das Korrosionsermüdungsverhalten im Einstufen- und Betriebslastenversuch
Bauer-Troßmann, Kathrin
: Melz, T.; Oechsner, M.
Dissertation
2019Einfluss von Druckwasserstoff auf das Schwingfestigkeitsverhalten eines ferritischen und austenitischen Edelstahls im LCF-Bereich
Schmiedl, Tobias; Schönborn, Steffen; Melz, Tobias
Conference Paper
2019Einfluss von Gusshautrandzonen auf die Schwingfestigkeit von Gusseisen mit Kugelgrafit
Bleicher, Christoph; Melz, Tobias; Berger, Kim; Kutz, Adalbert; Bührig-Polaczek, Andreas
Journal Article
2019Einfluss von Mangansulfiden auf die statische und zyklische Festigkeit
Scurria, Matilde; Melz, Tobias; Kock, Christoph; Chugreev, Alexander; Relge, Roman; Bonhage, Martin; Behrens, Bernd-Arno
Journal Article
2019Einfluss von Temperatur und Halbzeuggröße auf das Schwingfestigkeitsverhalten von Proben aus Sphäroguss
Schönborn, Steffen; Melz, Tobias
Conference Paper
2019Einflüsse auf das zyklische Werkstoffverhalten von additiv gefertigten metallischen Strukturen und deren Berücksichtigung bei der Schwingfestigkeitsbewertung
Wagener, Rainer; Scurria, Matilde; Schnabel, Kai; Bein, Thilo
Book Article
2019Elastomere Sensorwerkstoffe zur Digitalisierung industrieller Prozesse
Kaal, William; Rieß, Sebastian
Journal Article
2019EMPT verbindet Stahl und Alu so fest wie herkömmlich geschweißt
Baumgartner, Jörg
Journal Article
2019Entwicklung experimenteller und numerischer Methoden zur Modellbildung der Schneid-Klemmverbindung
Haouel, M.; Kimpel, T.; Wagener, Rainer; Melz, Tobias; Kaufmann, Heinz
Conference Paper
2019Ermittlung richtungsabhängiger Kennwerte für kurzfaserverstärkte Thermoplaste: Erzeugung hochorientierter Proben und der Einfluss der Probenpräparation
Roo, Tamara van
Conference Paper
2019Estimation of Component Fatigue Lives under Service Load-Time Functions Using an Advanced Transfer Methodology for the Transition from Specimen to Component Related Material Behaviour
Hell, Matthias; Wagener, Rainer
Journal Article, Conference Paper
2019Evaluation of fatigue strength criteria for thick-walled nodular cast iron components from EN-GJS-400 under multiaxial load
Faß, Markus; Störzel, Klaus; Baumgartner, Jörg
Conference Paper
2019Evaluation of uncertainty in the vibration attenuation with shunted piezoelectric transducers intregrated in a beam-column support
Götz, Benedict
: Melz, Tobias; Groche, Peter
Dissertation
2019Extreme Yield Figures for Universal Strength Criteria
Rosendahl, P.L.; Kolupaev, Vladimir A.; Altenbach, Holm
Book Article
2019Fatigue analysis of cast iron components considering the influence of casting skin
Bergner, Kim Martine; Hesseler, Jan; Bleicher, Christoph
Journal Article, Conference Paper
2019Fatigue Assessment of Additively Manufactured Metallic Structures Using Local Approaches Based on Finite-Element Simulations
Schnabel, Kai; Baumgartner, Jörg; Möller, Benjamin
Journal Article, Conference Paper
2019Fatigue behavior of large cast components under variable amplitude loading with overloads
Bleicher, C.; Wagener, R.; Kaufmann, H.
Report
2019Fatigue Strength Assessment for components and subsystems of a lightweight, space saving city car with electric drive
Voigt, Thorsten; Lipp, Klaus; Melz, Tobias
Journal Article, Conference Paper
2019Fatigue strength assessment of TIG-dressed welded steel joints by local approaches
Baumgartner, J.; Yildirim, H.C.; Barsoum, Z.
Journal Article
2019Fatigue Strength of Laser Beam Welded Steel-Aluminium Joints Considering Variable Amplitude Loading and Corrosive Environment
Möller, Benjamin; Albrecht, Simon; Wagener, Rainer; Melz, Tobias
Journal Article, Conference Paper
2019Flexible materials with PTC effect
Koppler, Dagmar; Dill, Alexander; Proksch, Bettina; Malz, Frank
Journal Article
2019Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit. Jahresbericht 2018
 
Annual Report
2019Frequency-dependent material properties of copper and aluminum alloys
Loos, D.; Barti, E.; Schröter, G.; Wagener, R.; Melz, T.
Journal Article
2019Ganzheitliche Simulation aktiver NVH-Systeme im Fahrzeug
Atzrodt, Heiko; Grimm, Andreas-Josef; Steinkamp, Uwe; Hüskens, Patrick
Journal Article
2019Halogen-Free Flame-Retardant Compounds. Thermal Decomposition and Flammability Behavior for Alternative Polyethylene Grades
Luyt, Adriaan Stephanus; Malik, Sarah Shahid; Gasmi, Soumia Abderrazak; Porfyris, Athanasios; Andronopoulou, Anna; Korres, Dimitrios; Vouyiouka, Stamatina; Großhauser, Michael; Pfaendner, Rudolf; Brüll, Robert; Papaspyrides, Constantine
Journal Article
2019Heat capacity spectroscopy by using stochastic temperature modulated calorimetry: Time-temperature superposition and fictive temperature at the glass transition of poly (vinyl acetate)
Alig, I.; Böhm, F.; Lellinger, D.
Journal Article
2019High performance liquid chromatography of polyolefin plastomers/elastomers (ethylene/1-octene copolymers) - Comparison of different solvent systems
Arndt, Jan-Hendrik; Brüll, Robert; Macko, Tibor; Garg, Praveen; Tacx, Jacques C.J.F.
Journal Article
2019Hochdynamische Charakterisierung von hydraulischen Schwingungsdämpfern
Rieß, Sebastian; Hansmann, Jan; Kaal, William; Herold, Sven
Journal Article
2019Hochfrequente Charakterisierung und Modellierung von Elastomerlagern
Kaal, William; Rieß, Sebastian
Journal Article
2019HPLC Separation of Ethylene-Vinyl Acetate Copolymers According to Chemical Composition
Macko, Tibor; Arndt, Jan-Hendrik; Brüll, Robert
Journal Article
2019Hybride Methoden und Entwicklungswerkzeuge für effizienteres Testen und Entwickeln
Hansmann, Jan; Millitzer, Jonathan; Rieß, Sebastian; Balzer, Louis
Journal Article
2019Improvement of fracture toughness and glass transition temperature of DGEBA‐based epoxy systems using toughening and crosslinking modifiers
Utaloff, K.; Kothmann, M.H.; Ciesielski, M.; Döring, M.; Neumeyer, T.; Altstädt, V.; Gorman, I.; Henningsen, M.
Journal Article
2019In-situ X-ray computed tomography of composites subjected to fatigue loading
Wagner, Peter; Schwarzhaupt, Oliver; May, Michael
Journal Article
2019Influence of annealing conditions on elastic and dielectric properties of P(VDF-TrFE) copolymer and its composites
Belovickis, Jaroslavas; Werne, Lisa; Silibin, Maxim; Samulionis, Vytautas; Lellinger, Dirk; Oehler, Harald; Banys, Juras; Sysa, Artem; Nekludov, Kapiton; Shvartsman, Vladimir V.; Alig, Ingo
Journal Article
2019Influence of remaining casting skin on the fatigue strength of cast iron components
Bergner, Kim Martine; Bleicher, Christoph; Wagener, Rainer
Journal Article, Conference Paper
2019Influence on the fatigue behavior of additively manufactured aluminum structures
Wagener, Rainer; Scurria, Matilde; Kaufmann, Heinz; Melz, Tobias
Journal Article, Conference Paper
2019Investigations of passive wing technologies for load reduction
Krüger, W.R.; Dillinger, J.; Breuker, R. de; Haydn, K.
Journal Article
2019KMU-innovativ - Verbundvorhaben: Ressourceneffizienz: Langzeitverfügbarkeit von elektronischen/elektromechanischen Bedieneinheiten (LEB)
Geertz, Guru; Pfaendner, Rudolf
Report
2019Konstruktionsgrundlagen für schwingbelastete Bauteile - Erweiterung der Synthetischen Wöhlerlinien
Hell, Matthias; Wagener, Rainer; Richter, Torsten; Kleemann, Andreas; Bergmann, Joachim W.; Diemar, Andreas
Journal Article
2019Machbarkeitsstudie zur Verwendung energieautarker adaptiver Schwingungstilger in technischen Anwendungen
Koch, Michael; Mayer, Dirk
Conference Paper
2019Metal Polymer Connections: Laser-Induced Surface Enlargement Increases Joint Strength
Woitun, Dominic; Roderus, Michael; Bein, Thilo; Kroner, Elmar
Conference Paper
2019Mit additiver Fertigung zu Losgröße 1
Brandt, Jonas Martin
Journal Article
2019Modeling fatigue life of composite laminates: A statistical micro-mechanics approach
Laveuve, D.M.; Büter, A.
Journal Article
2019Multiscale Structure and Microscopic Deformation Mechanisms of Gel-Spun Ultrahigh-Molecular-Weight Polyethylene Fibers
Balzano, L.; Coussens, B.; Engels, T.; Oosterlinck, F.; Vlasblom, M.; Werff, H. van der; Lellinger, D.
Journal Article
2019Non-isothermal crystallization of polypropylene with sorbitol-type nucleating agents at cooling rates used in processing
Schawe, Jürgen E.K.; Budde, Felix; Alig, Ingo
Journal Article
2019Novel amphiphilic block copolymer modifiers based on chain‐extended polyester for improved toughness of epoxy resins
Schneider, J.-P.; Just, B.; Döring, M.
Journal Article
2019A Novel Method for Active Vibration Control of Steering Wheel
Kuwar, V.; Setia, S.; Pachhapurkar, N.; Pawar, P.R.; Santosh Jambhale, M.; Ramesh Saraf, M.; Millitzer, J.; Koch, T.; Herold, S.
Report
2019Novel phosphinate‐containing zinc polyacrylate and its utilization as flame retardant for polyamides
Garth, K.; Döring, M.; Kraemer, R.; Roth, M.; Thomas, C.
Journal Article
2019Operation Parameters and Structural Optimization of a One-way Spiral Casting Roller
Zhang, H.W.; Yin, S.G.; Liang, L.Z.; Chen, Q.Y.; Zhang, C.H.; Beinert, C.
Conference Paper
2019Optimierte Lebensdaueranalysen von Gussbauteilen
Bleicher, Christoph
Journal Article
2019Pareto-Optimierung eines Systems zur aktiven Schwingungsminderung mit Hilfe evolutionärer Algorithmen und Echtzeitsimulation am Beispiel eines semiaktiven Dämpfers
Mees, Valentin; Balzer, Louis; Lapiccirella, Giovanni; Millitzer, Jonathan
Conference Paper
2019Phosphorus Containing Polyacrylamides as Flame Retardants for Epoxy-Based Composites in Aviation
Greiner, L.; Kukla, P.; Eibl, S.; Döring, M.
Journal Article
2019Phosphorus-Containing Flame Retardants from Biobased Chemicals and their Application in Polyesters and Epoxy Resins
Sag, Jacob; Goedderz, Daniela; Kukla, Philipp; Greiner, Lara; Schönberger, Frank; Döring, Manfred
Journal Article
2019Plastic Additives
Pfaendner, Rudolf
Book Article
2019Poly (butyl acrylate)-graft-polystyrene synthesis by free-radical polymerization: Interplay between structure, morphology, mechanical, and optical properties
Fage, J.; Knoll, K.; Niessner, N.; Carstensen, O.; Schulz, T.; Malz, F.; Döring, M.; Schönberger, F.
Journal Article
2019Polymer-induced metal diffusion during plastic processing: A reason for deposit formation
Sonnenberg, M.; Gustus, R.; Sedelmeier, S.; Wegewitz, L.; Höfft, O.; Wieser, J.; Maus-Friedrichs, W.
Journal Article
2019Porous graphite as platform for the separation and characterization of synthetic polymers - an overview
Kot, David; Macko, Tibor; Arndt, Jan-Hendrik; Brüll, Robert
Journal Article
2019Preload dependent material properties of lamination stacks for electric machines
Loos, Daniel; Barti, Endre; Wagener, Rainer; Melz, Tobias
Journal Article
2019Quantitative FMEA and Functional Safety Metrics Evaluation in Bayesian Networks
Rauschenbach, Matthias; Nuffer, Jürgen
Conference Paper
2019Richtungsabhängige Kennwerte
Roo, Tamara van; Dillenberger, Felix
Journal Article
2019Schwingungsrisskorrosionsverhalten von Stählen in biogenen Kraftstoffen
Käfer, Sven; Schönborn, Steffen; Engler, T.; Melz, Tobias; Oechsner, M.
Conference Paper
2019Simulation-based multi-objective optimization of a fuzzy controller for semi-active suspension
Balzer, Louis; Mees, Valentin; Millitzer, Jonathan; Lapiccirella, Giovanni
Conference Paper
2019Simultaneous load and structural monitoring of a carbon fiber rudder stock: Experimental results from a quasi-static tensile test
Neuschwander, K.; Moll, J.; Memmolo, V.; Schmidt, M.; Bücker, M.
Journal Article
2019Strukturelemente zur Berücksichtigung von Anisotropie und Inhomogenitäten in der rechnerischen Lebensdauerabschätzung von additiv gefertigten Bauteilen
Schnabel, Kai; Baumgartner, Jörg; Wagener, Rainer
Conference Paper
2019A Study in Options to Improve Aerodynamic Profile of Heavy-Duty Vehicles in Europe
Hariram, Adithya; Koch, Thorsten; Mårdberg, Björn; Kyncl, Jan
Journal Article
2019Studying the bivariate tacticity distribution of poly-1-octene using two-dimensional liquid chromatography coupled with NMR
Rode, K.; Malz, F.; Arndt, J.-H.; Macko, T.; Horchler, G.; Yu, Y.; Brüll, R.
Journal Article
2019Synergistic flame retardant interplay of phosphorus containing flame retardants with aluminum trihydrate depending on the specific surface area in unsaturated polyester resin
Reuter, Jens; Greiner, Lara; Schönberger, Frank; Döring, Manfred
Journal Article
2019Synergy between melamine cyanurate, melamine polyphosphate and aluminum diethylophosphinate in flame retarded thermoplastic polyurethane
Sut, Aleksandra; Metzsch-Zilligen, Elke; Großhauser, Michael; Pfaendner, Rudolf; Schartel, Bernhard
Journal Article
2019Tadellos gefügt
Zeidler-Finsel, Anke
Journal Article
2019Two control strategies for semi-active load path redistribution in a load-bearing structure
Gehb, Christopher Maximilian; Platz, Roland; Melz, Tobias
Journal Article
2019Uncertainty quantification in the mathematical modelling of a suspension strut using Bayesian inference
Mallapur, Shashidhar; Platz, Roland
Journal Article
2019Urban EV - Lebensdaueruntersuchungen an einem Elektro-Stadtfahrzeug mit Schwenkachse
Voigt, Thorsten; Lipp, Klaus; Melz, Tobias
Conference Paper
2019Virtuelle Lebensdaueranalyse von Leichtbau-Strukturen unter Berücksichtigung des Steifigkeitsverhaltens im Betrieb
Rösch, Peter
: Melz, Tobias; Oechsner, Matthias
Dissertation
2019Werkstoffverhalten von Gussbauteilen
Bergner, Kim Martine
Journal Article
2019Wireless Sensor Networks and Energy Harvesting for Energy Autonomous Smart Structures
Grasböck, Lukas; Humer, Alexander; Nader, Manfred; Schagerl, Martin; Mayer, Dirk; Misol, Malte; Humer, Christoph; Herold, Sven; Monner, Hans Peter
Conference Paper
2018Active vibration reduction of ship propulsion systems
Bartel, Torsten; Herold, Sven; Infante, Francesco; Käsgen, Johannes; Matthias, Michael; Millitzer, Jonathan; Perfetto, Sara
Conference Paper
2018Active vibration reduction on a quadrocopter
Bartel, T.; Atzrodt, H.; Wilczynski, D.
Conference Paper
2018An active-system approach for eliminating the wolf note on a cello
Neubauer, Philipp; Tschesche, Johannes; Bös, Joachim; Melz, Tobias; Hanselka, Holger
Journal Article
2018Additives: Secondary raw materials of the future
Schultheis, C.; Metzsch-Zilligen, E.; Pfaendner, R.
Journal Article
2018Alternative formulations of standard criteria
Kolupaev, V.A.
Book Article
2018Analyse des Schwingfestigkeitsverhaltens von drossbehaftetem Gusseisen mit Kugelgraphit
Bleicher, Christoph
Journal Article
2018Anwendungspotential von Laserstrahl- und Laserhybridschweißnähten für Stumpfstoßverbindungen ultrahochfester Feinkornbaustähle
Seyfried, Benjamin; Möller, Benjamin; Knödel, Peter; Wagener, Rainer; Ummenhofer, Thomas; Melz, Tobias
Conference Paper
2018Applications
Kolupaev, V.A.
Book Article
2018Betriebsfestigkeit lasergeschweißter Stumpfnähte für den Einsatz in Kranstrukturen am Beispiel des Feinkornbaustahls S1100QL
Möller, Benjamin; Seyfried, Benjamin; Wagener, Rainer; Knödel, Peter; Melz, Tobias; Ummenhofer, T.
Conference Paper
2018Bewertung der Schallabstrahlung dünnwandiger Strukturen anhand der Analyse der Strukturintensität
Schaal, Clarissa; Groba, Peter; Bös, Joachim; Melz, Tobias
Conference Paper
2018Characterization of the chemical composition distribution of polyolefin plastomers/elastomers (ethylene/1-octene copolymers) and comparison to theoretical predictions
Arndt, Jan-Hendrik; Brüll, Robert; Macko, Tibor; Garg, Praveen; Tacx, Jacques
Journal Article
2018Charakterisierung variierter Randzonenzustände an Gussbauteilen und Bewertung des Einflusses auf die Ermüdungsfestigkeit
Bergner, Kim Martine; Bleicher, Christoph; Wagener, Rainer; Melz, Tobias
Conference Paper
2018Combination of material characterization and cyclic fatigue testing for investigation of elastomer aging
Lellinger, Dirk; Kroth, Thomas; Reinhardt, Marc; Bitsch, Thorsten; Kühne, Kai; Rode, Karsten; Malz, Frank; Wallmichrath, Marc; Alig, Ingo
Book Article
2018A comparative study of various joining techniques fatigue behaviour focusing on stiffness degradation
Rösch, Peter; Bruder, Thomas; Bein, Thilo
Journal Article, Conference Paper
2018Comparison of strength criteria based on the measurements on concrete
Kolupaev, V.A.; Yu, M.-H.; Altenbach, H.; Bolchoun, A.
Journal Article
2018Conditions and assumptions of strength criteria
Kolupaev, V.A.
Book Article
2018Controlling the Morphology of Au–Pd Heterodimer Nanoparticles by Surface Ligands
Kluenker, M.; Connolly, B.M.; Marolf, D.M.; Nawaz Tahir, M.; Korschelt, K.; Simon, P.; Köhler, U.; Plana-Ruiz, S.; Barton, B.; Panthöfer, M.; Kolb, U.; Tremel, W.
Journal Article
2018Correlation between comprehensive 2D liquid chromatography and Monte Carlo simulations for branched polymers
Apel, Nico; Ramakrishnan, Vaidyanath; Uliyanchenko, Elena; Moyses, Stephan; Wold, Christian; Macko, Tibor; Brüll, Robert
Journal Article
2018Crack propagation in PE-HD induced by environmental stress cracking (ESC) analyzed by several imaging techniques
Schilling, Markus; Niebergall, Ute; Alig, Ingo; Oehler, Harald; Lellinger, Dirk; Meinel, Dietmar; Böhning, Martin
Journal Article
2018Crash and durability of aluminum and mixed steel aluminum joints made by electromagnetic pulse welding
Huberth, F.; Klitschke, S.; Gall, M.; Sommer, S.; Schnabel, K.; Baumgartner, J.
Conference Paper
2018Criteria of equivalent stress concept
Kolupaev, V.A.
Book Article
2018Critical distance approach for the fatigue strength assessment of magnesium welded joints in contrast to Neuber's effective stress method
Karakaş, Ö.; Zhang, G.; Sonsino, C.M.
Journal Article
2018Definition of a loading scenario and experimental verification on a material handlers load arm
Herbert, Andreas; Käsgen, Johannes
Conference Paper
2018Design development of rotational energy harvesting vibration absorber (R-EHTVA)
Infante, F.; Kaal, W.; Perfetto, S.; Herold, S.
Conference Paper
2018Design of an inertial mass actuator for active vibration control of a planetary gearbox using piezoelectric shear actuator
Zech, P.; Plöger, D.F.; Bartel, T.; Röglin, T.; Rinderknecht, S.
Conference Paper
2018Development and design of multifunctional lightweight structures for satellite applications
Schubert, M.; Perfetto, S.; Dafnis, A.; Mayer, D.; Atzrodt, H.
Conference Paper
2018Development and implementation of a multi-channel active control system for the reduction of road induced vehicle interior noise
Gäbel, Gunnar; Millitzer, Jonathan; Atzrodt, Heiko; Herold, Sven; Mohr, Andreas
Journal Article
2018Digitaler Zwilling eines servohydraulischen Prüfstands zur Durchführung virtueller Prüfungen an mechatronischen Wankstabilisatoren
Landersheim, Volker; Fischer, Felix; Möller, Ricardo; Huang, Ha; Awad, Hasan
Conference Paper
2018Dimensionless values for comparison
Kolupaev, V.A.
Book Article
2018Effect of static axial loads on the lateral vibration attenuation of a beam with piezo-elastic supports
Götz, Benedict; Platz, Roland; Melz, Tobias
Journal Article
2018Effect of the material modeling and the experimental material characterisation on fatigue life estimation within strain-based fatigue assessment approaches
Hell, Matthias; Wagener, Rainer; Kaufmann, Heinz; Melz, Tobias
Journal Article
2018Efficient and parametric digital twins for system engineering applications
Tamm, Christoph
Conference Paper
2018Effiziente phosphorhaltige Stabilisatoren auf Basis von Diphenyl-amin und heterocyclischer Diphenylamin-Derivate
Briesenick, Max; Ciesielski, Michael; Pfaendner, Rudolf
Patent
2018Einfluss der metallurgischen Eigenschaften der Gesenkteilungsebene auf die Schwingfestigkeit warm massivumgeformter Stahlbauteile
Wagener, Rainer; Scurria, Matilde; Möller, Benjamin; Schuster, J.
Conference Paper
2018Einflüsse auf das zyklische Spannungs-Dehnungsverhalten von additiv gefertigten Strukturen aus AlSi10Mg
Wagener, Rainer; Scurria, Matilde; Möller, Benjamin
Conference Paper
2018Einflüsse der Oberflächenbehandlung und Aufbaurichtung auf das zyklisch Spannungs-Dehnungs-Verhalten von additiv gefertigten Strukturen aus Inconel 718
Scurria, Matilde; Möller, Benjamin; Wagener, Rainer; Melz, Tobias
Conference Paper
2018Electrochemical characterization of automotive aluminum alloys regarding their corrosion fatigue behavior
Engler, T.; Andersohn, G.; Oechsner, M.; Araújo, F.D. de; Kaufmann, H.; Melz, T.
Journal Article
2018Enhanced lightweight design by composites - results of the EU project ENLIGHT
Mayer, Dirk; Bein, Thilo; Buff, Hendrik; Götz, Benedict; Schwarzhaupt, Oliver; Spancken, Dominik
Journal Article
2018Entwicklung einer robusten Berechnungsmethode zur Bestimmung der Strukturintensität von dünnwandigen, gekrümmten Bauteilen unter Zuhilfenahme virtueller Messdaten
Kleinfeller, Nikolai; Bös, Joachim; Melz, Tobias
Conference Paper
2018Entwicklung passiver und aktiver Maßnahmen zur Minderung der Schalltransmission durch Doppelglas-Fensterscheiben
Klaus, Tim Bastian
: Melz, Tobias (Berichterstatter); Beidl, Christian (Mitberichterstatter)
Dissertation
2018Equivalent stress concept for limit state analysis
Kolupaev, Vladimir, A.
Book
2018Estimation of power input and output of structures using structural intensity measurements
Groba, Peter; Ebert, Johannes; Stoewer, Torsten; Bös, Joachim; Melz, Tobias
Conference Paper
2018Experimental characterisation of a flat dielectric elastomer loudspeaker
Rustighi, Emiliano; Kaal, William; Herold, Sven; Kubbara, Ahmed
Journal Article
2018Experimentelle und numerische Ermittlung der Verbundsteifigkeiten und thermischen Ausdehnung von Kupferwicklungen
Loos, D.; Barti, E.; Wagener, R.; Melz, Tobias
Conference Paper
2018Experimentelle Untersuchung der Ähnlichkeit skalierter Plattenstrukturen
Adams, Christian; Bös, Joachim; Melz, Tobias
Conference Paper
2018Experiments and equipment
Kolupaev, V.A.
Book Article
2018Fatigue assessment of EMPT-welded joints using the reference radius concept
Baumgartner, J.; Schnabel, K.; Huberth, F.
Journal Article, Conference Paper
2018Fatigue behaviour of aluminium tube crimp connections applying the electromagnetic pulse technology
Lipp, Klaus; Schaefer, R.; Horwatitsch, D.
Journal Article, Conference Paper
2018Fatigue life curve - a continuous Wöhler curve from LCF to VHCF
Wagener, Rainer; Melz, Tobias
Journal Article
2018Fitting of criteria
Kolupaev, V.A.
Book Article
2018Formulations of classical strength hypotheses
Kolupaev, V.A.
Book Article
2018Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit. Jahresbericht 2017
 
Annual Report
2018Frequency and temperature dependent stiffness and damping properties of reduced viscoelastic structures using component mode synthesis (CMS)
Somesan, Vlad; Barti, Endre; Bein, Thilo
Report
2018From Single Molecules to Nanostructured Functional Materials
Nawaz Tahir, M.; Kluenker, M.; Natalio, F.; Barton, B.; Korschelt, K.; Shylin, S.I.; Panthöfer, M.; Ksenofontov, V.; Möller, A.; Kolb, U.; Tremel, W.
Journal Article
2018Gain-scheduled H∞ buckling control of a circular beam-column subject to time-varying axial loads
Schäffner, Maximilian; Platz, Roland
Journal Article
2018Generalized cavitation criterion for poro-hyperelastic materials
Drass, M.; Kolupaev, V.; Rosendahl, P.L.; Schneider, J.; Becker, W.
Conference Paper
2018Generalized pressure-insensitive criteria
Kolupaev, V.A.
Book Article
2018Generalized pressure-sensitive criteria
Kolupaev, V.A.
Book Article
2018Grundlagen für die Bemessung druckwasserexponierter Komponenten unter Berücksichtigung werkstoffspezifischer Eigenschaften und Schädigungsmechanismen
Schmiedl, Tobias; Melz, Tobias
Conference Paper
2018Hybrid materials - Joining of polymers and metals
Spancken, Dominik; Laveuve, Dominik M.; Beck, J.; Stötzner, Norbert; Straeten, Kira van der; Büter, Andreas; Henning, Frank
Conference Paper
2018Implementation of a modular model for active engine mounts and coupling with a reduced model for full-vehicle NVH-simulation
Grimm, A.; Finger, Karsten; Stoll, G.; Atzrodt, H.; Herold, S.
Conference Paper
2018Influence of different load histories on the cyclic material behavior of nodular cast iron for thick-walled application
Bleicher, C.
Journal Article
2018Influence of salt corrosion on the fatigue behaviour of aluminium alloys for chassis components under constant and variable amplitude loading
Duarte de Araújo, F.; Engler, T.; Andersohn, G.; Oechsner, M.; Kaufmann, H.; Schönborn, S.; Melz, T.
Journal Article, Conference Paper
2018Innovative testing process for electric powertrains
Nickel, D.; Stelter, E.; Sültrop, C.; Mittmann, W.; Heiduczek, T.; Hohenner, H.
Conference Paper
2018Introduction
Kolupaev, V.A.
Book Article
2018Iron Oxide Superparticles with Enhanced MRI Performance by Solution Phase Epitaxial Growth
Kluenker, M.; Tahir, M.N.; Dören, R.; Deuker, M.; Komforth, P.; Plana-Ruiz, S.; Barton, B.; Shylin, S.I.; Ksenofontov, V.; Panthöfer, M.; Wiesmann, N.; Herzberger, J.; Möller, A.; Frey, H.; Brieger, J.; Kolb, U.; Tremel, W.
Journal Article
2018Isogonal and isotoxal hexagons as extremal yield figures
Altenbach, H.; Rosendahl, P.L.; Becker, W.; Kolupaev, V.A.
Abstract
2018Lightweight Automobiles ALLIANCE Project: First Results of Environmental and Economic Assessment from a Life-Cycle Perspective
Delogu, Massimo; Pero, Francesco del; Zanchi, Laura; Ierides, Marcos; Fernandez, Violeta; Seidel, Kristian; Thirunavukkarasu, Dinesh; Bein, Thilo
Report
2018Eine Methode zur Festigkeitsbeurteilung von laserstrahlgeschweißten Magnesium-Verbindungen unter mehrachsigen Beanspruchungen mit konstanten und variablen Amplituden
Bolchoun, Alexandre
: Melz, Tobias (1. Gutachter); Sonsino, Cetin Morris (2. Gutachter); Schäfer, M. (3. Gutachter)
Dissertation
2018Modellbasierte Gleitzustandsansätze zur Regelung von Ruckelschwingungen in Fahrzeugantriebssträngen
Yousif, Leonard
Dissertation
2018Monomere in den Adern
Klein, Roland; Popzyk, Marie-Isabel; Burlon, Konrad; Wennemann, Katharina; Karl, Janis; Köhler, Thomas; Wischnowski, Marko; Gries, Thomas
Journal Article
2018Monomers coursing through the veins
Klein, R.; Popzyk, M.-I.; Burlon, K.; Wennemann, K.; Karl, J.; Köhler, T.; Wischnowski, M.; Gries, T.
Journal Article
2018Multi-surface criteria
Kolupaev, V.A.
Book Article
2018Multifunctional and lightweight load-bearing composite structures for satellites
Schubert, M.; Perfetto, S.; Dafnis, A.; Atzrodt, H.; Mayer, D.
Conference Paper
2018New developments in flame-retardant polystyrene foams
Döring, M.
Conference Paper
2018Novel N-phosphorylated iminophosphoranes based on 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide
Weinert, Michael; Fuhr, Olaf; Döring, Manfred
Journal Article
2018Novel organophosphorus flame retardants and their synergistic application in novolac epoxy resin
Schmidt, Christian; Ciesielski, Michael; Greiner, Lara; Döring, Manfred
Journal Article
2018Nucleation activity at high supercooling: Sorbitol-type nucleating agents in polypropylene
Schawe, Jürgen E.K.; Budde, Felix; Alig, Ingo
Journal Article
2018On cavitation in transparent structural silicone adhesive: TSSA
Drass, Michael; Kolupaev, Vladimir A.; Schneider, Jens; Kolling, Stefan
Journal Article
2018Online listening test to evaluate the gear mesh noise of inequidistant gearings
Neubauer, Philipp; Bös, Joachim; Melz, Tobias
Conference Paper
2018Optimization of a vibration absorber with piezoelectric energy harvesting capabilities
Perfetto, Sara
Dissertation
2018Passive, adaptive, active vibration control, and integrated approaches
Mayer, Dirk; Herold, Sven
Book Article
2018Phosphorus Containing Polymers as Flame Retardants
Döring, Manfred
Abstract
2018Preliminary acousto-ultrasonic investigation for multi-parameter transducer self-diagnostic system in composites
Memmolo, V.; Park, Y.J.; Lilov, M.; Monaco, E.; Ricci, F.
Journal Article
2018Prognostics and health monitoring for ECU based on piezoresistive sensor measurements
Palczynska, Alicja
Dissertation
2018Quantification of uncertainty in the mathematical modelling of a multivariable suspension strut using bayesian interval hypothesis-based approach
Mallapur, Shashidhar; Platz, Roland
Conference Paper
2018Rapid mass calorimeter as a high-throughput screening method for the development of flame-retarded TPU
Sut, Aleksandra; Metzsch-Zilligen, Elke; Großhauser, Michael; Pfaendner, Rudolf; Schartel, Bernhard
Journal Article
2018Recent developments in hardware-in-the-loop testing
Millitzer, Jonathan; Mayer, Dirk; Henke, Christian; Jersch, Torben; Tamm, Christoph; Michael, Jan; Ranisch, Christopher
Conference Paper
2018Rechnerische Lebensdauerabschätzung mit Berücksichtigung der Ergebnisse aus Umformsimulationen
Störzel, Klaus; Kraemer, F.; Bernhard, Julian; Oechsner, M.
Conference Paper
2018Scaling laws obtained from a sensitivity analysis and applied to thin vibrating structures
Adams, Christian; Bös, Joachim; Slomski, Elena M.; Melz, Tobias
Journal Article
2018Schwingfestigkeitsbewertung von additiv gefertigten metallischen Bauteilen
Schnabel, Kai; Baumgartner, Jörg; Choccia, Andreas
Conference Paper
2018Sekundärrohstoffe der Zukunft
Schultheis, Christoph; Metzsch-Zilligen, Elke; Pfaendner, Rudolf
Journal Article
2018Separation of branched Poly(bisphenol A carbonate) structures by solvent gradient at near-critical conditions and two-dimensional liquid chromatography
Apel, Nico; Uliyanchenko, Elena; Moyses, Stephan; Rommens, Stijn; Wold, Christian; Macko, Tibor; Brüll, Robert
Journal Article
2018Simulink-PSpice co-simulation of power amplifier for driving piezoelectric actuators
Park, Y.; Bartel, T.; Röglin, T.; Stoll, G.M.; Zech, P.; Plöger, D.; Rinderknecht, S.
Conference Paper
2018Stability, performance and power consumption of a centralised and decentralised active vibration control system
Lapiccirella, Giovanni; Rohlfing, Jens
Conference Paper
2018Strength criteria for concrete and their comparison with experiments
Altenbach, Holm; Kolupaev, Vladimir
Conference Paper
2018Structural health monitoring of composite aerospace structures with acoustic emission
Lehmann, Martin; Büter, Andreas; Schwarzhaupt, Oliver; Contell Asins, Conchin
Conference Paper
2018Study of crack initiation and crack propagation of short fiber reinforced polyamide
Decker, J.; Schwarzhaupt, O.; Herkenrath, L.M.; Spancken, D.; Büter, A.
Conference Paper
2018Summary and outlook
Kolupaev, V.A.
Book Article
2018TRANSFORMERS - Configurable and Adaptable Trucks and Trailers for Optimal Transport
Adams, Paul; Nitzsche, Gunter; Löfstrand, Sofia; Selas, A.; Arts, G.; Adesiyun, A.; Wagner, S.; Koch, T.; Jacob, B.; Schmidt, F.; Billiet, M.; Hariram, A.; Queckenstedt, B.; Koornneef, G.; Zweep, C. van der; Bertens, T.; Hillbrand, B.
Conference Paper
2018Uncertainty quantification in case of imperfect models: A non-bayesian approach
Kohler, Michael; Krzyzak, Adam; Mallapur, Shashidhar; Platz, Roland
Journal Article
2018Variantenvielfalt durch additiv gefertigte Bauteile
Schnabel, Kai; Möller, Benjamin
Book Article
2018Verfahren zur Erniedrigung der Kristallisationstemperatur von teilkristallinen Polyamiden, hierdurch hergestellte Polyamidformmasse sowie Verwendung von mehrfunktionellen umesterungsfähigen organischen Phosphoniten, organischen Phosphiten, organischen Phosphaten bzw. Mischungen hiervon zur Erniedrigung der Kristallisationstemperatur, zur Vernetzung und/oder Verzweigung von teilkristallinen Polyamiden
Groos, Benjamin; Pfaendner, Rudolf
Patent
2018Verfahren zur Herstellung eines Polymerisates durch Nitroxyl-kontrollierte Polymerisation sowie Polymerisat
Burlon, Konrad; Klein, Roland; Mazurowski, Markus; Pfaendner, Rudolf; Wittemann, Matthias
Patent
2018Verpackungssystem sowie Verfahren zum Verpacken von Stückgut
Berges, Claudia; Berges, Dirk; Metzsch-Zilligen, Elke; Pfaendner, Rudolf
Patent
2018Visualization methods
Kolupaev, V.A.
Book Article
2018Visualization of standard criteria
Kolupaev, V.A.
Book Article
2018Wandlerelement
Hansmann, Jan; Herold, Sven; Jungblut, Timo; Kaal, William; Stoll, Georg Maximilian
Patent
2018Welche Materialien stabil bleiben
Schultheis, Christoph; Großhauser, Michael; Metzsch-Zilligen, Elke; Pfaendner, Rudolf
Journal Article
2018Wie wirksam sind Haftvermittler?
Arndt, Jan-Hendrik; Brüll, Robert
Journal Article
2018Zielgrößenbestimmung zur Durchführung einer Sensitivitätsanalyse bei der Absorptionsgradmessung im Kundt’schen Rohr
Wenzel, Sören; Grebel, Antje; Slomski-Vetter, Elena; Bös, Joachim; Melz, Tobias
Conference Paper
2018Zur Beurteilung der Betriebsfestigkeit von Gusseisen mit Kugelgraphit unter Beanspruchungszeitfunktionen mit Überlasten
Bleicher, Christoph; Kaufmann, Heinz; Wagener, Rainer; Melz, Tobias
Conference Paper
2018Zuverlässigkeitsabsicherung eines Kontrolldisplays für Medizinanwendungen
Nuffer, Jürgen
Book Article
201735th IMAC, a Conference and Exposition on Structural Dynamics 2017. Proceedings. Vol.3: Model validation and uncertainty quantification. Preface
Barthorpe, R.; Platz, R.; Lopez, I.; Moaveni, B.; Papadimitriou, C.
Conference Paper
2017Ableitung einer kontinuierlichen Bemessungswöhlerlinie von der Kurzzeitfestigkeit bis in die Langzeitfestigkeit
Wagener, Rainer; Melz, Tobias
Conference Paper
2017Active vibration isolation with a dielectric elastomer stack actuator
Kaal, W.; Bartel, T.; Herold, S.
Journal Article
2017Akustik 3D-gedruckter Zahnräder
Neubauer, Philipp; Bös, Joachim; Melz, Tobias
Conference Paper
2017Eine Analyse des Anwendungspotenzials von piezoelektrischen Netzwerken im Maschinenbau
Heuss, Oliver
: Melz, Tobias (Berichterstatter); Rinderknecht, Stephan (Mitberichterstatter)
Dissertation
2017Analysis of the energy exchange between coupled subsystems by means of the divergence in the vibratory energy field
Groba, Peter; Ebert, Johannes; Stoewer, Torsten; Bös, Joachim; Melz, Tobias
Conference Paper
2017Anordnung und Verfahren zur Beeinflussung und/oder Detektion einer dynamischen oder statischen Eigenschaft einer Tragstruktur
Mayer, Dirk; Salloum, Rogério
Patent
2017An approach for the design of a mechanical Hardware-in-the-Loop interface
Millitzer, Jonathan; Ranisch, Christopher; Tamm, Christoph; Bartolozzi, Riccardo; Melz, Tobias
Conference Paper
2017Approach to prove the efficiency of the Monte Carlo method combined with the elementary effect method to quantify uncertainty of a beam structure with piezo-elastic supports
Li, S.; Goetz, B.; Schaeffner, M.; Platz, R.
Conference Paper
2017Bayesian inference approach to evaluate the uncertainty in the mathematical modelling of a suspension strut
Mallapur, Shashidhar; Platz, Roland
Conference Paper
2017A benchmark case for structural intensity calculations
Adams, Christian; Bös, Joachim; Melz, Tobias
Conference Paper
2017Beurteilung der Schwingfestigkeit von lunkerbehaftetem Gusseisen mit Kugelgrafit aus Röntgenbildern
Bleicher, Christoph
Journal Article
2017Bewertung der Betriebsfestigkeit sicherheitsrelevanter, hartgelöteter Fügeverbund
Melz, Tobias; Tillmann, Wolfgang; Bobzin, Kirsten; Baumgartner, J.; Manke, M.; Sievers, N.; Wiesner, S.; Schütt, T.
Conference Paper
2017Bewertung des Einflusses von Extremlasten auf das zyklische Werkstoffverhalten von Gusseisen mit Kugelgraphit
Bleicher, Christoph; Wagener, Rainer; Melz, Tobias
Conference Paper
2017Combination of cyclic fatigue testing and materials characterisation to investigate ageing of elastomers
Kroth, T.; Lellinger, D.; Alig, Ingo; Wallmichrath, Marc
Journal Article
2017Comparison of control strategies for global load path redistribution in a load-bearing structure
Gehb, Christopher; Platz, Roland; Melz, Tobias
Conference Paper
2017Comparison of sampling techniques for global sensitivity analyses of scaled vibrating structures
Adams, Christian; Bös, Joachim; Slomski, Elena M.; Melz, Tobias
Conference Paper
2017Computer-Integrated Engineering and Design
Martins, T.W.; Abedini, S.; Ahmels, L.; Albrecht, K.; Anderl, R.; Bruder, E.; Groche, P.; Kaufmann, H.; Mahajan, P.; Melz, T.; Özel, M.; Pouriayevali, H.; Reising, J.; Schäfer, S.; Tijani, Y.; Tomasella, A.; Xu, B.-X.
Book Article
2017Connected testing of electric powertrains
Schyr, Christian; Stelter, Eva; Sültrop, Christian
Conference Paper
2017Consistent approach to describe and evaluate uncertainty in vibration attenuation using resonant piezoelectric shunting and tuned mass dampers
Götz, Benedict; Platz, Roland; Melz, T.
Journal Article
2017Cyclic Material Behavior of High-Strength Steels Used in the Fatigue Assessment of Welded Crane Structures with a Special Focus on Transient Material Effects
Möller, B.; Tomasella, A.; Wagener, R.; Melz, T.
Journal Article
2017Deriving a continuous fatigue life curve from LCF to VHCF
Wagener, R.; Melz, T.
Report
2017Description and evaluation of uncertainty in the early development phase of a beam-column system subjected to passive and active buckling control
Mallapur, S.; Platz, Roland
Conference Paper
2017Design of functionally graded joints using a polyurethane-based adhesive with varying amounts of acrylate
Stapleton, S.E.; Weimer, J.; Spengler, J.
Journal Article
2017Development and experimental verification of a corrosion fatigue assessment method for highly-stressed engine components in E85 biofuel
Käfer, S.; Melz, T.; Kaufmann, H.; Engler, C.T.; Anderson, G.; Oechsner, M.
Conference Paper
2017Development of a multiaxial test environment for highly dynamically loaded mechatronic components
Vrbata, J.; Atzrodt, H.; Kimpel, T.; Koch, T.; Mayer, D.
Conference Paper
2017Effect of Graphite Nanoplate Morphology on the Dispersion and Physical Properties of Polycarbonate Based Composites
Müller, M.T.; Hilarius, K.; Liebscher, M.; Lellinger, D.; Alig, I.; Pötschke, P.
Journal Article
2017Einfluss der Gusshaut auf das Schwingfestigkeitsverhalten von Gusseisen mit Kugelgraphit
Schönborn, Steffen; Melz, Tobias
Conference Paper
2017Electrochemical characterization of automotive aluminum alloys regarding their corrosion fatigue behavior
Engeler, T.; Araújo, Francisco; Andersohn, G.; Kaufmann, Heinz; Melz, Tobias; Oechsner, M.
Conference Paper
2017Enhance lightweight design by composites - results of the EU project ENLIGHT
Mayer, Dirk; Bein, Thilo; Buff, Hendrik; Götz, Benedict; Schwarzhaupt, Oliver; Spancken, Dominik
Conference Paper
2017Environmental stress cracking of polyethylene high density (PE-HD) induced by liquid media - validation and verification of the full-notch creep test (FNCT)
Schilling, M.; Böhning, M.; Oehler, Harald; Alig, Ingo; Niebergall, U.
Journal Article
2017Evaluation of the Influence of MnS in Forged Steel 38MnVS6 on Fatigue Life
Scurria, M.; Emre, S.; Möller, B.; Wagener, R.; Melz, T.
Journal Article
2017Experimental results and fatigue life evaluation of magnesium laserbeam-welded joints under proportional and non-proportional multiaxial fatigue loading with variable amplitudes
Bolchoun, A.; Sonsino, C.M.; Kaufmann, H.; Melz, T.
Journal Article
2017Fatigue Assessment of Nodular Cast Iron with Material Imperfections
Bleicher, C.; Wagener, R.; Kaufmann, H.; Melz, T.
Journal Article
2017Fatigue assessment of PM components considering the highly stressed volume approach and mechanical properties
Haberlick, Etienne; Lipp, Klaus
Journal Article
2017Fatigue assessment of thick-walled nodular cast iron with regard to highly loaded machine structures using the strainlife approach
Hesseler, Jan; Bleicher, Christoph; Baumgartner, Jörg; Schnabel, Kai; Wagener, Rainer; Kaufmann, Heinz; Melz, Tobias
Conference Paper
2017Fatigue assessment with special respect to size effects and material behavior within local strain-based approaches
Hell, M.; Wagener, R.; Kaufmann, H.; Melz, T.
Report
2017Fatigue lifetime assessment of aluminium alloys for chassis components under corrosive environments
Araújo, Francisco; Engler, T.; Kaufmann, Heinz; Schönborn, Steffen; Andersohn, G.; Melz, Tobias; Oechsner, M.
Conference Paper
2017Fatigue performance of additive manufactured TiAl6V4 using electron and laser beam melting
Greitemeier, D.; Palm, F.; Syassen, F.; Melz, T.
Journal Article
2017Fatigue strength assessment of laser welded thin-walled joints made of mild and high strength steel
Marulo, G.; Baumgartner, Jörg; Frendo, F.
Journal Article
2017Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit. Jahresbericht 2016
 
Annual Report
2017Funktionsintegrierter Leichtbauquerlenker
Töws, Paul; Spancken, Dominik; Schwarzhaupt, Oliver; Herkenrath, Mavie; Büter, Andreas
Conference Paper
2017Generalized strength criteria as functions of the stress angle
Kolupaev, Vladimir, A.
Journal Article
2017Global load path adaption in a simple kinematic load-bearing structure to compensate uncertainty of misalignment due to changing stiness conditions of the structure's supports
Gehb, Christopher; Platz, Roland; Melz, Tobias
Conference Paper
2017Herleitung von Modellgesetzen schwingender Strukturen mittels Sensitivitätsanalyse am Beispiel einer gelenkig gelagerten Rechteckplatte
Adams, Christian; Bös, Joachim; Melz, Tobias
Conference Paper
2017Hochfrequenzprüfstände für die Charakterisierung von Aggregatlagern
Fiebig, N.; Schmidt, Matthias
Conference Paper
2017Hybride Leichtbauhinterachse für Elektrofahrzeuge
Becker, Paul; Büter, Andreas
Journal Article
2017Industrial IoT: Potentiale für die dezentrale Schwingungsdiagnose
Kloepfer, Jannes; Koch, Michael; Bartel, Torsten; Friedmann, A.
Conference Paper
2017Influence of different load histories on the cyclic material behavior of nodular cast iron for thick-walled application
Bleicher, Christoph; Wagener, Rainer; Kaufmann, Heinz; Melz, Tobias
Conference Paper
2017Insulating sandwich housing structures for the thermal management of battery packs
Weidmann, F.
Conference Paper
2017Interpenetrating polymer networks formed by cyanate esters and phenylethynyl-terminated imides
Meier, C.; Parlevliet, P.P.; Döring, M.
Journal Article
2017Kopplung von zyklischen Betriebsfestigkeitsuntersuchungen und Materialcharakterisierung zur Untersuchung der Elastomeralterung
Kroth, T.; Lellinger, D.; Alig, Ingo; Wallmichrath, Marc
Journal Article
2017Lasertechnik für den Leichtbau - Materialhybride aus Kunststoff und Metall
Spancken, Dominik; Straeten, K. van der; Beck, J.; Hofmann, S.; Büter, Andreas
Conference Paper
2017Lateral vibration attenuation of a beam with piezo-elastic supports subject to varying axial tensile and compressive loads
Götz, Benedict; Platz, Roland; Melz, Tobias
Conference Paper
2017Leichtbau mit Sandwichstrukturen. Sandwichstruktur mit integrierter thermischer Funktion
Geiling, M.; Schwarzhaupt, O.; Asins, C.C.
Journal Article
2017Lignin a sustainable and renewable flame retardant for abs
Bourbigot, S.; Fontaine, G.; Prieur, B.; Wittemann, M.; Klein, R.
Conference Paper
2017Linear Parameter-Varying (LPV) buckling control of an imperfect beam-column subject to time-varying axial loads
Schäffner, Maximilian; Platz, Roland
Conference Paper
2017Longtime monitoring with smart sensor networks: The case of the Zwartewaterbrug
Siebel, T.; Friedmann, A.; Strobel, W.; Guse, M.; Hartmann, A.
Conference Paper
2017Low cycle fatigue life assessment of welded high-strength structural steels based on nominal and local design concepts
Möller, B.; Baumgartner, J.; Wagener, R.; Kaufmann, H.; Melz, T.
Journal Article
2017Low cycle fatigue of short fibre reinforced polyamides
Stötzner, Norbert; Büter, Andreas; Spancken, Dominik; Laveuve, Dominik
Conference Paper
2017Manufacturing Induced Properties
Ahmels, L.; Bott, A.-K.; Bruder, E.; Gibbels, M.; Gramlich, S.; Hansmann, M.; Karin, I.; Kohler, M.; Lipp, K.; Melz, T.; Müller, C.; Neufeld, D.; Niehuesbernd, J.; Roos, M.; Tomasella, A.; Ulbrich, S.; Wagener, R.; Walter, A.
Book Article
2017Messunsicherheit im Kundtschen Rohr
Grebel, Anja; Bös, Joachim; Melz, Tobias
Conference Paper
2017Die Methodik-Lücke geschlossen. Zuverlässigkeitsbewertung von Leistungselektronik
Nuffer, Jürgen; Pfeiffer, Thomas; Rauschenbach, Matthias; Holz, Johannes; Stoll, Georg
Journal Article
2017Modeling of moisture-induced stress in PMMA: A simple approach to consider sorption behavior in FEM
Geertz, Guru; Wieser, Jürgen; Alig, Ingo; Heinrich, Gert
Journal Article
2017Modellierung quellungsbedingter Spannungen in PMMA mittels FEM unter Berücksichtigung von Sorptionsisothermen
Geertz, Guru
: Heinrich, Gert (Berichterstatter); Rehahn, Matthias (Mitberichterstatter)
Dissertation
2017Modelling of contact interfaces using non-homogenous discrete elements to predict dynamical behaviour of assembled structures
Sharma, Anuj
: Melz, Tobias (Berichterstatter); Schweizer, Bernhard (Mitberichterstatter)
Dissertation
2017Multi axial fatigue design of laser welded plastic parts
Spancken, Dominik; Laveuve, Dominik; Büter, Andreas; Henning, Frank
Conference Paper
2017Multiaxial fatigue assessment for automotive safety components of cast aluminium EN AC-42000 T6 (G-AlSi7Mg0.3 T6) under constant and variable amplitude loading
Sonsino, Cetin Morris; Franz, Roland
Journal Article
2017Multiaxial vibration testing of inertia force related components of ev
Debes, Christian; Zinke, Rüdiger; Dautfest, Alexander; Karthikeyan, Ashwin; Melz, Tobias
Conference Paper
2017Multifunctional load carrying lightweight structures for space design
Schubert, M.; Perfetto, Sara; Dafnis, A.; Mayer, Dirk; Atzrodt, Heiko; Schröder, K.-U.
Conference Paper
2017A new method for fatigue life evaluation under out-of-phase variable amplitude loadings and its application to thin-walled magnesium welds
Bolchoun, A.; Baumgartner, J.; Kaufmann, H.
Journal Article
2017Non-destructive characterization of fiber orientation in reinforced SMC as input for simulation based design
Schladitz, Katja; Büter, Andreas; Godehardt, Michael; Wirjadi, Oliver; Fleckenstein, Johanna; Gerster, Tobias; Hassler, Ulf; Jaschek, Katrin; Maisl, Michael; Maisl, Ute; Mohr, Stefan; Netzelmann, Udo; Potyra, Tobias; Steinhauser, Martin O.
Journal Article
2017Non-probabilistic uncertainty evaluation in the concept phase for airplane landing gear design
Platz, Roland; Götz, Benedict
Conference Paper
2017Nucleation efficiency of fillers in polymer crystallization studied by fast scanning calorimetry: Carbon nanotubes in polypropylene
Schawe, J.E.K.; Pötschke, P.; Alig, I.
Journal Article
2017Numerische Schwingfestigkeitsanalyse von Widerstandspunktschweißungen
Lohse, Sebastian
: Melz, Tobias (Gutachter); Oechsner, Matthias (Gutachter)
Dissertation
2017Observations by evaluating the uncertainty of stress distribution in truss structures based on probabilistic and possibilistic methods
Li, Sushan; Platz, Roland
Journal Article
2017Optimal placement of six inertial mass actuators for MIMO active vibration control on a laboratory truss structure
Lapiccirella, Giovanni; Rohlfing, Jens; Tehrani, M.G.
Conference Paper
2017Performance and power consumption of a decentralized velocity feedback control system with six inertial mass actuators on a laboratory truss structure
Lapiccirella, Giovanni; Rohlfing, Jens
Conference Paper
2017Phase behavior of mixtures - High-throughput small angle light scattering for rapid determination of phase behavior of multicomponent systems
Steinhoff, Bernd; Philipp, Katrin; Alig, Ingo; Matmour, Rachid; Dronet, Severin
Journal Article
2017Phosphorylation of lignin: Characterization and investigation of the thermal decomposition
Prieur, B.; Meub, M.; Wittemann, M.; Klein, R.; Bellayer, S.; Fontaine, G.; Bourbigot, S.
Journal Article
2017Physikalische Modellbildung für das Additive Sintern von Kunststoffmaterialien
Wohlgemuth, Florian; Alig, Ingo
Book Article
2017Piezoresistive Silicon Stress Sensor As a Tool to Monitor Health of an Electronic System
Palczynska, A.; Prisacaru, A.; Gromala, P.; Han, B.; Mayer, D.; Melz, T.
Conference Paper
2017Polybenzimidazole-based block copolymers: From monomers to membrane electrode assemblies for high temperature polymer electrolyte membrane fuel cells
Schönberger, F.; Qian, G.; Benicewicz, B.C.
Journal Article
2017Quantification and evaluation of uncertainty in the mathematical modelling of a suspension strut using Bayesian model validation approach
Mallapur, S.; Platz, Roland
Conference Paper
2017Remote mechanical vibration sensing: A comparison between CW-doppler radar and laser-doppler vibrometer measurements
Shrestha, A.; Kumar, R.; Dornuf, F.; Moll, J.; Krozer, V.; Schmidt, Matthias
Conference Paper
2017The Result: A New Design Paradigm
Roos, M.; Abedini, S.; Abele, E.; Albrecht, K.; Anderl, R.; Gibbels, M.; Gramlich, S.; Groche, P.; Horn, B.; Hoßfeld, A.; Köhler, S.; Lüthen, H.; Mattmann, I.; Melz, T.; Monnerjahn, V.; Müller, C.; Neuwirth, M.; Niehuesbernd, J.; Özel, M.; Pfetsch, M.; Reising, J.; Schäfer, S.; Schmidt, S.; Turan, E.; Ulbrich, S.; Wagner, C.; Walter, A.; Martins, T.W.; Zimmermann, A.
Book Article
2017Review and considerations on the fatigue assessment of welded joints using reference radii
Baumgartner, J.
Journal Article
2017Schwingungsrisskorrosionsverhalten von Stählen in biogenen Kraftstoffen
Käfer, Sven; Melz, Tobias
Conference Paper
2017Selective chromatographic separation of polycarbonate according to hydroxyl end-groups using a porous graphitic carbon column
Apel, Nico; Uliyanchenko, E.; Moyses, S.; Rommens, S.; Wold, C.; Macko, Tibor; Rode, Karsten; Brüll, Robert
Journal Article
2017Simulation of the scenario of the biaxial wheel fatigue test
Santiciolli, F.M.; Möller, R.; Krause, I.; Dedini, F.G.
Journal Article
2017Single-source macroporous hybrid materials by melt-shear organization of core-shell particles
Vowinkel, S.; Malz, F.; Rode, K.; Gallei, M.
Journal Article
2017Structural intensity research at TU Darmstadt
Bös, Joachim; Melz, Tobias
Conference Paper
2017Synthesis of a new phosphorylated ethylamine, thereon based phosphonamidates and their application as flame retardants
Garth, Kim; Klinkowski, Christoph; Fuhr, Olaf; Döring, Manfred
Journal Article
2017Testing and evaluation of a suspension arm with integrated functions
Spancken, Dominik; Büter, Andreas; Töws, Paul; Schwarzhaupt, Oliver
Journal Article
2017Thermische Alterung und Eigenschaften von Polymermaterialien für das Selektive Lasersintern
Schubert, Konrad; Kolb, Johannes; Wohlgemuth, Florian; Lellinger, Dirk; Alig, Ingo
Book Article
2017Towards prognostics and health monitoring: The potential of fault detection by piezoresistive silicon stress sensor
Palczynska, A.; Prisacaru, A.; Gromala, P.J.; Han, B.T.; Mayer, D.; Melz, T.
Journal Article, Conference Paper
2017Use of magnetic bearings in vibration control of a steam turbine with oil-film bearings
Pilotto, Rafael; Nordmann, Rainer; Atzrodt, Heiko; Herold, Sven
Conference Paper
2017Verbundprojekt Systemforschung Elektromobilität
Horch, Felix; Busse, Matthias
Book Article
2017Versagensverhalten von Mischschweißverbindungen unter mehrachsiger crashartiger und schwingender Beanspruchung am Beispiel von EMPT-Blechschweißungen. Schlussbericht
Huberth, F.; Baumgartner, J.
Report
2017Viscoelastic modelling of gas pore collapse during during polymer sintering
Wohlgemuth, Florian; Alig, Ingo
Conference Paper
2017Viscoelastic modelling of gas pore collapse during polymer sintering
Wohlgemuth, F.; Alig, I.
Conference Paper
2017Vorrichtung und Verfahren zur Beeinflussung einer dynamischen Eigenschaft wenigstens eines beweglich gelagerten Körpers sowie deren Verwendung als variabel einstellbares Dämpfungselement
Hansmann, Jan; Wolter, Stefan; Seipel, Björn; Kaal, William; Herold, Sven
Patent
2017Wie wirksam sind Haftvermittler?
Brüll, Robert
Journal Article
2017Witterungsbedingte Lackschäden früher erkennen
Alig, Ingo; Oehler, Harald; Wanner, Matthias
Journal Article