| | |
|---|
| 2020 | Accelerated thermal aging of thermoplastic materials for the motor compartment: Characterization, degradation model and lifetime prediction
Lellinger, Dirk; Alig, Ingo; Oehler, Harald; Rode, Karsten; Malz, Frank; Herkenrath, Lena Mavie; Youn, Jee young | Book Article |
| 2020 | Affordable Multi-Material Lightweight Design - Selected Results of the H2020 Project ALLIANCE
Bein, Thilo; Mbang, Sama; Thirinavukkarasu, Dinesh; Kerschbaum, Martin; Bassan, Daniele; Michler, Thorsten; Meschke, Jens; Jonasson, Paul; Ierides, Marcos | Presentation |
| 2020 | Analysis and design of efficient multiple-input multiple-output broadband active vibration control systems
Lapiccirella, Giovanni
: Melz, T.; Berkhoff, A. | Dissertation |
| 2020 | Applying Uncertainty Quantification to Structural Systems: Parameter Reduction for Evaluating Model Complexity
Locke, Robert; Kupis, Shyla; Gehb, Christopher M.; Platz, Roland; Atamturktur, Sez | Conference Paper |
| 2020 | Assessing the Influence of Different Forging Process Parameters on the Local Fatigue Properties of a Precipitation Hardening Ferritic-Pearlitic Steel
Hell, M.; Wagener, R.; Melz, T. | Conference Paper |
| 2020 | Bayesian Inference Based Parameter Calibration of the LuGre-Friction Model
Gehb, C.M.; Atamturktur, S.; Platz, R.; Melz, T. | Journal Article |
| 2020 | Behavior of Forging Steels under Cyclic Loading - the Benefit of Air-Hardening Martensites
Schmiedl, T.; Gramlich, A.R.M.; Schönborn, S.; Melz, T. | Journal Article |
| 2020 | Coordination Compounds of 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-Oxide (DOPO) Ligands: Extremely High Thermostability and Ligand Oxidation in the Solid State
Goedderz, D.; Schäfer, T.; Klitsch, J.; Weber, L.; Weber, B.; Fuhr, O.; Buntkowsky, G.; Schönberger, F.; Döring, M. | Journal Article |
| 2020 | Deriving the Structural Fatigue Behavior of Additively Manufactured Components
Wagener, R.; Hell, M.; Scurria, M.; Bein, T. | Conference Paper |
| 2020 | Detection of Pin Failure in Carbon Fiber Composites Using the Electro-Mechanical Impedance Method
Moll, Jochen; Schmidt, Matthias; Käsgen, Johannes; Mehldau, Jörg; Bücker, Marcel; Haupt, Felix | Journal Article |
| 2020 | Development of air-hardening martensitic forging steels
Gramlich, A.; Schmiedl, T.; Schönborn, S.; Melz, T.; Bleck, W. | Journal Article |
| 2020 | Efficient flame retardant interplay of unsaturated polyester resin formulations based on ammonium polyphosphate
Reuter, J.; Greiner, L.; Kukla, P.; Döring, M. | Journal Article |
| 2020 | Fatigue assessment of additively manufactured AlSi10Mg laser beam welded to rolled EN AW-6082-T6 sheet metal
Möller, B.; Schnabel, K.; Wagener, R.; Kaufmann, H.; Melz, T. | Journal Article |
| 2020 | Fatigue assessment of welded thin sheets with the notch stress approach - Proposal for recommendations
Baumgartner, J.; Hobbacher, A.F.; Rennert, R. | Journal Article |
| 2020 | A Fatigue Life Approach for Additively Manufactured Structures
Wagener, R.; Möller, B.; Scurria, M.; Bein, T. | Conference Paper |
| 2020 | Fatigue of brazed joints made of X5CrNi18-10 and Cu110 and derivation of reliable assessment approaches
Baumgartner, J.; Tillmann, W.; Bobzin, K.; Öte, M.; Wiesner, S.; Sievers, N. | Journal Article |
| 2020 | Fatigue Strength Under Spectrum Loading
Heim, R. | Book Article |
| 2020 | Flame retardant polyester by combination of organophosphorus compounds and an NOR radical forming agent
Goedderz, Daniela; Weber, Lais; Markert, Daniel; Schießer, Alexander; Fasel, Claudia; Riedel, Ralf; Altstädt, Volker; Bethke, Christian; Fuhr, Olaf; Puchtler, Florian; Breu, Josef; Döring, Manfred | Journal Article |
| 2020 | Flame-retardant hybrid materials based on expandable polystyrene beads
Reuter, J.; Standau, T.; Altstädt, V.; Döring, M. | Journal Article |
| 2020 | Fraunhofer LBF - Macht Schluss mit Brummen und Dröhnen
Rieß, Sebastian; Hansmann, Jan; Kaal, William | Journal Article |
| 2020 | Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit. Jahresbericht 2019
| Annual Report |
| 2020 | Functionalized structural components with adaptive stiffness for soft robotic applications
Wockenfuß, Wilhelm Richard; Weisheit, Linda; Kaal, William; Rieß, Sebastian | Presentation |
| 2020 | Hochglanzprodukte leichter entformen
Steinhoff, Bernd; Kothe, Hans; Keunecke, Martin; Burmeister, Frank; Meyer, Frank; Zosel, Jürgen | Journal Article |
| 2020 | Improving the flame‐retardant property of bottle‐grade PET foam made by reactive foam extrusion
Bethke, Christian; Goedderz, Daniela; Weber, Lais; Standau, Tobias; Döring, Manfred; Altstädt, Volker | Journal Article |
| 2020 | In-depth characterization of polyolefin plastomers/elastomers (ethylene/1-octene copolymers) through hyphenated chromatographic techniques
Arndt, Jan-Hendrik; Brüll, Robert; Macko, Tibor; Garg, P.; Tacx, Jacques C.J.F. | Journal Article |
| 2020 | The influence of coverage for high frequency mechanical impact treatment of different steel grades
Schubnell, J.; Eichheimer, C.; Ernould, C.; Maciolek, A.; Rebelo-Kornmeier, J.; Farajian, M. | Journal Article |
| 2020 | Influence of the optical measurement technique and evaluation approach on the determination of local weld geometry parameters for different weld types
Schubnell, J.; Jung, M.; Le, C.H.; Farajian, M.; Braun, M.; Ehlers, S.; Fricke, W.; Garcia, M.; Nussbaumer, A.; Baumgratner, J. | Journal Article |
| 2020 | Influencing Factors for Fatigue Strength
Heim, R. | Book Article |
| 2020 | Integrale Betrachtung zur Lebensdauerabschätzung von Stumpfnähten im Bereich der Kurzzeitschwingfestigkeit
Möller, Benjamin | Dissertation |
| 2020 | Investigation of flame retarded polypropylene by high-speed planar laser-induced fluorescence of OH radicals combined with a thermal decomposition analysis
Geschwindner, Christopher; Goedderz, Daniela; Li, Tao; Köser, Jan; Fasel, Claudia; Riedel, Ralf; Altstädt, Volker; Bethke, Christian; Puchtler, Florian; Breu, Josef; Döring, Manfred; Dreizler, Andreas; Böhm, Benjamin | Journal Article |
| 2020 | Load and structural health monitoring of a scaled CFRP rudder stock using electro-mechanical impedance technique
Moll, Jochen; Schmidt, Matthias; Käsgen, Johannes; Mehldau, Jörg; Bücker, Marcel; Haupt, Felix | Conference Paper |
| 2020 | A method for the strain rate dependent correction for control type of fatigue tests
Geilen, Max Benedikt; Klein, M.; Oechsner, Matthias; Kaffenberger, M.; Störzel, Klaus; Melz, Tobias | Journal Article |
| 2020 | Monitoring ermöglicht optimale Produktqualität
Park, Ye Ji | Journal Article |
| 2020 | Motivation
Heim, R. | Book Article |
| 2020 | Multiaxial fatigue life response depending on proportionality grade between normal and shear strains/stresses and material ductility
Sonsino, Cetin Morris | Journal Article |
| 2020 | N-phosphorylated Iminophosphoranes based on 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide and their flame-retardant behavior in epoxy resins
Weinert, Michael; Döring, Manfred | Journal Article |
| 2020 | A novel class of high molecular weight multifunctional antioxidants for polymers based on thiol-ene click reaction
Fischer, Johannes; Metzsch-Zilligen, Elke; Zou, Mingyi; Pfaendner, Rudolf | Journal Article |
| 2020 | Numerical and experimental validation of residual stresses of laser-welded joints and their influence on the fatigue behaviour
Sepe, R.; Wiebesiek, J.; Sonsino, C.M. | Journal Article |
| 2020 | On the anisotropic plastic behaviour of short fibre reinforced thermoplastics and its description by phenomenological material modelling
Dillenberger, Felix | Book |
| 2020 | On the use of a fictitious notch radius equal to 0.3 mm to design against fatigue welded joints made of wrought magnesium alloy AZ31
Karakaş, Ö.; Baumgartner, J.; Susmel, L. | Journal Article |
| 2020 | Operating Life Analysis
Heim, R. | Book Article |
| 2020 | Porous graphite as stationary phase for the chromatographic separation of polymer additives - determination of adsorption capability by Raman spectroscopy and physisorption
Kot, David; Zou, Mingyi; Brunnengräber, Kai; Arndt, Jan-Hendrik; Macko, Tibor; Etzold, Bastian J.M.; Brüll, Robert | Journal Article |
| 2020 | Quantification and Evaluation of Parameter and Model Uncertainty for Passive and Active Vibration Isolation
Lenz, Jonathan; Platz, Roland | Conference Paper |
| 2020 | Solid State Fluorination on the Minute Scale: Synthesis of WO3-x Fx with Photocatalytic Activity
Lange, M.A.; Krysiak, Y.; Hartmann, J.; Dewald, G.; Cerretti, G.; Tahir, M.N.; Panthöfer, M.; Barton, B.; Reich, T.; Zeier, W.G.; Mondeshki, M.; Kolb, U.; Tremel, W. | Journal Article |
| 2020 | Structural Durability
Heim, R. | Book Article |
| 2020 | Structural Durability. Methods and Concepts
Heim, Rüdiger | Book |
| 2020 | A Summary of Piezoelectric Energy Harvesting for Autonomous Smart Structures
Grasböck, Lukas; Reininger, Alexander; Nader, Manfred; Humer, Alexander; Schagerl, Martin; Misol, Malte; Monner, Hans Peter; Herold, Sven; Mayer, Dirk | Conference Paper |
| 2020 | Synthesis of novel bisphosphorylimides based on Staudinger reaction
Weber, Lais; Weinert, Michael; Goedderz, Daniela; Fuhr, Olaf; Döring, Manfred | Journal Article |
| 2020 | Synthesis of Novel Polymeric Acrylate-Based Flame Retardants Containing Two Phosphorus Groups in Different Chemical Environments and their Influence on the Flammability of Poly (Lactic Acid)
Sag, Jacob; Kukla, Philipp; Goedderz, Daniela; Roch, Hendrik; Kabasci, Stephan; Döring, Manfred; Schönberger, Frank | Journal Article |
| 2020 | Ultraglatte antiadhäsive Werkzeugbeschichtungen für Kunststoffformgebungs- und Folienverarbeitungsprozesse (GLANZFORM)
Steinhoff, B.; Burmeister, F.; Keunecke, M. | Report |
| 2020 | Verfahren und Produktionsanlage zur Verarbeitung eines Werkstoffs
Perko, Leonhard; Steinhoff, Bernd | Patent |
| 2020 | Zur rechnerischen Lebensdauerabschätzung für Faser-Kunststoff-Verbunde
Laveuve, Dominik Maximilian | Dissertation |
| 2019 | About a Digital Twin for the Fatigue Approach of Additively Manufactured Components
Wagener, Rainer; Scurria, Matilde; Bein, Thilo | Conference Paper |
| 2019 | Accurate determination of the layer thickness of a multilayer polymer film by non-invasive multivariate confocal Raman microscopy
Zou, M.Y.; Barton, B.; Geertz, G.; Brüll, R. | Journal Article |
| 2019 | Additive Fertigung von integrierten Aktoren und Sensoren
Bartel, Torsten; Röglin, Tobias | Book Article |
| 2019 | Advanced measurements and model update of an automotive turbochargerwith full-floating journal bearings
Leichtfuß, Sebastian; Kreschel, Martin; Durbiano, Loic; Dielenschneider, Tobias; Nordmann, Rainer; Atzrodt, Heiko; Pilotto, Rafael; Schiffer, Heinz-Peter | Conference Paper |
| 2019 | Akustische Anregungsquellen in hochintegrierten Leistungselektroniken mobiler Antriebe
Herrnberger, Maximilian; Hülsebrock, Moritz; Lichtinger, R.; Atzrodt, Heiko | Conference Paper |
| 2019 | Anordnung mit einer Seilklemme und wenigstens einem Seil
Kraus, Roman | Patent |
| 2019 | Assessing Model Form Uncertainty for a Suspension Strut using Gaussian Processes
Feldmann, Robert; Platz, Roland | Conference Paper |
| 2019 | Assessment of the Fatigue Strength of Thick-Walled Nodular Cast Iron with Dross
Bleicher, Christoph; Wagener, Rainer; Kaufmann, Heinz; Tschuncky, Ralf; Weber, Fabian; Hettich, Philipp; Buchmüller, Steffen; Berg, Hans W. | Journal Article, Conference Paper |
| 2019 | Benchmarking Workshop on (active) vibration damping
Reischl, Daniel; Mayer, Dirk; Herold, Sven; Mrak, Branimir; Venkatesan, S.K.; Berger, Wolfgang; Nader, Manfred; Depraetere, Bruno | Conference Paper |
| 2019 | Beschreibung des zyklischen Verhaltens eines Strukturelementes zur Lebensdauerabschätzung von additiv gefertigten Bauteilen
Wagener, Rainer; Scurria, Matilde; Möller, Benjamin | Conference Paper |
| 2019 | Characterization of the Cyclic Material Behavior of AlSi10Mg and Inconel® 718 produced by SLM
Scurria, Matilde; Möller, Benjamin; Wagener, Rainer; Bein, Thilo | Conference Paper |
| 2019 | Comparison of constrained parameterisation strategies for aerodynamic optimisation of morphing leading edge airfoil
Magrini, A.; Benini, E.; Ponza, R.; Wang, C.; Khodaparast, H.H.; Friswell, M.I.; Landersheim, V.; Laveuve, D.; Contell Asins, C. | Journal Article |
| 2019 | Conceptual-level evaluation of a variable stiffness skin for a morphing wing leading edge
Wang, C.; Haddad Khodaparast, H.; Friswell, M.I.; Magrini, A.; Ponza, R.; Benini, E.; Landersheim, V.; Laveuve, D.; Contell Asins, C. | Journal Article |
| 2019 | Cyclic Material Behavior of Ultra‐High‐Strength Fine‐Grained Steels and Welds for the Application in Fatigue Assessment Approaches
Möller, Benjamin; Wagener, Rainer; Melz, Tobias | Journal Article, Conference Paper |
| 2019 | Deriving strain based local structural element concept for the fatigue assessment of additively manufactured structures
Wagener, R.; Möller, B.; Melz, T.; Scurria, M. | Report |
| 2019 | Description of the cyclic material behaviour of aluminium wrought alloys as basis for a digital twin
Wagener, Rainer; Maciolek, Andreas; Kaufmann, Heinz | Journal Article |
| 2019 | Design and Optimization of Mechatronic Systems Using a Holistic and Parametric Simulation Approach
Tamm, Christoph; Perfetto, Sara | Journal Article, Conference Paper |
| 2019 | Development of a rotational energy harvesting tuned vibration absorber for torsional vibrations
Infante, Francesco | Dissertation |
| 2019 | Digitale Vernetzung für Leichtbau-optimierte Gussbauteile
Bleicher, Christoph | Journal Article |
| 2019 | Effect of Laser Beam Welding on the Cyclic Material Behavior of the Press-hardened Martensitic Chromium Steel X46Cr13
Möller, Benjamin; Wagener, Rainer; Melz, Tobias | Journal Article, Conference Paper |
| 2019 | Effect of the Surface Finish on the Cyclic Behavior of Additively Manufactured AlSi10Mg
Scurria, Matilde; Möller, Benjamin; Wagener, Rainer; Melz, Tobias | Conference Paper |
| 2019 | Effects of different heat treatments on the cyclic material behavior of additively manufactured Inconel®718
Scurria, Matilde; Möller, Benjamin; Wagener, Rainer; Bein, Thilo | Journal Article, Conference Paper |
| 2019 | Effects of Surface Preparation, Support Structures and Build Orientation on the Cyclic Stress-Strain Behavior of Inconel®718 Produced by SLM
Scurria, Matilde; Möller, Benjamin; Wagener, Rainer; Pena, Jose; Bein, Thilo | Report |
| 2019 | Einfluss biogener Kraftstoffe auf das Ermüdungsverhalten von Stählen
Käfer, Sven; Melz, Tobias; Engler, Tom; Oechsner, Matthias | Journal Article |
| 2019 | Einfluss des Korrosionsverhaltens von Aluminiumlegierungen auf das Korrosionsermüdungsverhalten im Einstufen- und Betriebslastenversuch
Bauer-Troßmann, Kathrin | Dissertation |
| 2019 | Einfluss von Druckwasserstoff auf das Schwingfestigkeitsverhalten eines ferritischen und austenitischen Edelstahls im LCF-Bereich
Schmiedl, Tobias; Schönborn, Steffen; Melz, Tobias | Conference Paper |
| 2019 | Einfluss von Gusshautrandzonen auf die Schwingfestigkeit von Gusseisen mit Kugelgrafit
Bleicher, Christoph; Melz, Tobias; Berger, Kim; Kutz, Adalbert; Bührig-Polaczek, Andreas | Journal Article |
| 2019 | Einfluss von Mangansulfiden auf die statische und zyklische Festigkeit
Scurria, Matilde; Melz, Tobias; Kock, Christoph; Chugreev, Alexander; Relge, Roman; Bonhage, Martin; Behrens, Bernd-Arno | Journal Article |
| 2019 | Einfluss von Temperatur und Halbzeuggröße auf das Schwingfestigkeitsverhalten von Proben aus Sphäroguss
Schönborn, Steffen; Melz, Tobias | Conference Paper |
| 2019 | Einflüsse auf das zyklische Werkstoffverhalten von additiv gefertigten metallischen Strukturen und deren Berücksichtigung bei der Schwingfestigkeitsbewertung
Wagener, Rainer; Scurria, Matilde; Schnabel, Kai; Bein, Thilo | Book Article |
| 2019 | Elastomere Sensorwerkstoffe zur Digitalisierung industrieller Prozesse
Kaal, William; Rieß, Sebastian | Journal Article |
| 2019 | EMPT verbindet Stahl und Alu so fest wie herkömmlich geschweißt
Baumgartner, Jörg | Journal Article |
| 2019 | Entwicklung experimenteller und numerischer Methoden zur Modellbildung der Schneid-Klemmverbindung
Haouel, M.; Kimpel, T.; Wagener, Rainer; Melz, Tobias; Kaufmann, Heinz | Conference Paper |
| 2019 | Ermittlung richtungsabhängiger Kennwerte für kurzfaserverstärkte Thermoplaste: Erzeugung hochorientierter Proben und der Einfluss der Probenpräparation
Roo, Tamara van | Conference Paper |
| 2019 | Estimation of Component Fatigue Lives under Service Load-Time Functions Using an Advanced Transfer Methodology for the Transition from Specimen to Component Related Material Behaviour
Hell, Matthias; Wagener, Rainer | Journal Article, Conference Paper |
| 2019 | Evaluation of fatigue strength criteria for thick-walled nodular cast iron components from EN-GJS-400 under multiaxial load
Faß, Markus; Störzel, Klaus; Baumgartner, Jörg | Conference Paper |
| 2019 | Evaluation of uncertainty in the vibration attenuation with shunted piezoelectric transducers intregrated in a beam-column support
Götz, Benedict | Dissertation |
| 2019 | Extreme Yield Figures for Universal Strength Criteria
Rosendahl, P.L.; Kolupaev, Vladimir A.; Altenbach, Holm | Book Article |
| 2019 | Fatigue analysis of cast iron components considering the influence of casting skin
Bergner, Kim Martine; Hesseler, Jan; Bleicher, Christoph | Journal Article, Conference Paper |
| 2019 | Fatigue Assessment of Additively Manufactured Metallic Structures Using Local Approaches Based on Finite-Element Simulations
Schnabel, Kai; Baumgartner, Jörg; Möller, Benjamin | Journal Article, Conference Paper |
| 2019 | Fatigue behavior of large cast components under variable amplitude loading with overloads
Bleicher, C.; Wagener, R.; Kaufmann, H. | Report |
| 2019 | Fatigue Strength Assessment for components and subsystems of a lightweight, space saving city car with electric drive
Voigt, Thorsten; Lipp, Klaus; Melz, Tobias | Journal Article, Conference Paper |
| 2019 | Fatigue strength assessment of TIG-dressed welded steel joints by local approaches
Baumgartner, J.; Yildirim, H.C.; Barsoum, Z. | Journal Article |
| 2019 | Fatigue Strength of Laser Beam Welded Steel-Aluminium Joints Considering Variable Amplitude Loading and Corrosive Environment
Möller, Benjamin; Albrecht, Simon; Wagener, Rainer; Melz, Tobias | Journal Article, Conference Paper |
| 2019 | Flexible materials with PTC effect
Koppler, Dagmar; Dill, Alexander; Proksch, Bettina; Malz, Frank | Journal Article |
| 2019 | Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit. Jahresbericht 2018
| Annual Report |
| 2019 | Frequency-dependent material properties of copper and aluminum alloys
Loos, D.; Barti, E.; Schröter, G.; Wagener, R.; Melz, T. | Journal Article |
| 2019 | Ganzheitliche Simulation aktiver NVH-Systeme im Fahrzeug
Atzrodt, Heiko; Grimm, Andreas-Josef; Steinkamp, Uwe; Hüskens, Patrick | Journal Article |
| 2019 | Halogen-Free Flame-Retardant Compounds. Thermal Decomposition and Flammability Behavior for Alternative Polyethylene Grades
Luyt, Adriaan Stephanus; Malik, Sarah Shahid; Gasmi, Soumia Abderrazak; Porfyris, Athanasios; Andronopoulou, Anna; Korres, Dimitrios; Vouyiouka, Stamatina; Großhauser, Michael; Pfaendner, Rudolf; Brüll, Robert; Papaspyrides, Constantine | Journal Article |
| 2019 | Heat capacity spectroscopy by using stochastic temperature modulated calorimetry: Time-temperature superposition and fictive temperature at the glass transition of poly (vinyl acetate)
Alig, I.; Böhm, F.; Lellinger, D. | Journal Article |
| 2019 | High performance liquid chromatography of polyolefin plastomers/elastomers (ethylene/1-octene copolymers) - Comparison of different solvent systems
Arndt, Jan-Hendrik; Brüll, Robert; Macko, Tibor; Garg, Praveen; Tacx, Jacques C.J.F. | Journal Article |
| 2019 | Hochdynamische Charakterisierung von hydraulischen Schwingungsdämpfern
Rieß, Sebastian; Hansmann, Jan; Kaal, William; Herold, Sven | Journal Article |
| 2019 | Hochfrequente Charakterisierung und Modellierung von Elastomerlagern
Kaal, William; Rieß, Sebastian | Journal Article |
| 2019 | HPLC Separation of Ethylene-Vinyl Acetate Copolymers According to Chemical Composition
Macko, Tibor; Arndt, Jan-Hendrik; Brüll, Robert | Journal Article |
| 2019 | Hybride Methoden und Entwicklungswerkzeuge für effizienteres Testen und Entwickeln
Hansmann, Jan; Millitzer, Jonathan; Rieß, Sebastian; Balzer, Louis | Journal Article |
| 2019 | Improvement of fracture toughness and glass transition temperature of DGEBA‐based epoxy systems using toughening and crosslinking modifiers
Utaloff, K.; Kothmann, M.H.; Ciesielski, M.; Döring, M.; Neumeyer, T.; Altstädt, V.; Gorman, I.; Henningsen, M. | Journal Article |
| 2019 | In-situ X-ray computed tomography of composites subjected to fatigue loading
Wagner, Peter; Schwarzhaupt, Oliver; May, Michael | Journal Article |
| 2019 | Influence of annealing conditions on elastic and dielectric properties of P(VDF-TrFE) copolymer and its composites
Belovickis, Jaroslavas; Werne, Lisa; Silibin, Maxim; Samulionis, Vytautas; Lellinger, Dirk; Oehler, Harald; Banys, Juras; Sysa, Artem; Nekludov, Kapiton; Shvartsman, Vladimir V.; Alig, Ingo | Journal Article |
| 2019 | Influence of remaining casting skin on the fatigue strength of cast iron components
Bergner, Kim Martine; Bleicher, Christoph; Wagener, Rainer | Journal Article, Conference Paper |
| 2019 | Influence on the fatigue behavior of additively manufactured aluminum structures
Wagener, Rainer; Scurria, Matilde; Kaufmann, Heinz; Melz, Tobias | Journal Article, Conference Paper |
| 2019 | Investigations of passive wing technologies for load reduction
Krüger, W.R.; Dillinger, J.; Breuker, R. de; Haydn, K. | Journal Article |
| 2019 | KMU-innovativ - Verbundvorhaben: Ressourceneffizienz: Langzeitverfügbarkeit von elektronischen/elektromechanischen Bedieneinheiten (LEB)
Geertz, Guru; Pfaendner, Rudolf | Report |
| 2019 | Konstruktionsgrundlagen für schwingbelastete Bauteile - Erweiterung der Synthetischen Wöhlerlinien
Hell, Matthias; Wagener, Rainer; Richter, Torsten; Kleemann, Andreas; Bergmann, Joachim W.; Diemar, Andreas | Journal Article |
| 2019 | Machbarkeitsstudie zur Verwendung energieautarker adaptiver Schwingungstilger in technischen Anwendungen
Koch, Michael; Mayer, Dirk | Conference Paper |
| 2019 | Metal Polymer Connections: Laser-Induced Surface Enlargement Increases Joint Strength
Woitun, Dominic; Roderus, Michael; Bein, Thilo; Kroner, Elmar | Conference Paper |
| 2019 | Mit additiver Fertigung zu Losgröße 1
Brandt, Jonas Martin | Journal Article |
| 2019 | Modeling fatigue life of composite laminates: A statistical micro-mechanics approach
Laveuve, D.M.; Büter, A. | Journal Article |
| 2019 | Multiscale Structure and Microscopic Deformation Mechanisms of Gel-Spun Ultrahigh-Molecular-Weight Polyethylene Fibers
Balzano, L.; Coussens, B.; Engels, T.; Oosterlinck, F.; Vlasblom, M.; Werff, H. van der; Lellinger, D. | Journal Article |
| 2019 | Non-isothermal crystallization of polypropylene with sorbitol-type nucleating agents at cooling rates used in processing
Schawe, Jürgen E.K.; Budde, Felix; Alig, Ingo | Journal Article |
| 2019 | Novel amphiphilic block copolymer modifiers based on chain‐extended polyester for improved toughness of epoxy resins
Schneider, J.-P.; Just, B.; Döring, M. | Journal Article |
| 2019 | A Novel Method for Active Vibration Control of Steering Wheel
Kuwar, V.; Setia, S.; Pachhapurkar, N.; Pawar, P.R.; Santosh Jambhale, M.; Ramesh Saraf, M.; Millitzer, J.; Koch, T.; Herold, S. | Report |
| 2019 | Novel phosphinate‐containing zinc polyacrylate and its utilization as flame retardant for polyamides
Garth, K.; Döring, M.; Kraemer, R.; Roth, M.; Thomas, C. | Journal Article |
| 2019 | Operation Parameters and Structural Optimization of a One-way Spiral Casting Roller
Zhang, H.W.; Yin, S.G.; Liang, L.Z.; Chen, Q.Y.; Zhang, C.H.; Beinert, C. | Conference Paper |
| 2019 | Optimierte Lebensdaueranalysen von Gussbauteilen
Bleicher, Christoph | Journal Article |
| 2019 | Pareto-Optimierung eines Systems zur aktiven Schwingungsminderung mit Hilfe evolutionärer Algorithmen und Echtzeitsimulation am Beispiel eines semiaktiven Dämpfers
Mees, Valentin; Balzer, Louis; Lapiccirella, Giovanni; Millitzer, Jonathan | Conference Paper |
| 2019 | Phosphorus Containing Polyacrylamides as Flame Retardants for Epoxy-Based Composites in Aviation
Greiner, L.; Kukla, P.; Eibl, S.; Döring, M. | Journal Article |
| 2019 | Phosphorus-Containing Flame Retardants from Biobased Chemicals and their Application in Polyesters and Epoxy Resins
Sag, Jacob; Goedderz, Daniela; Kukla, Philipp; Greiner, Lara; Schönberger, Frank; Döring, Manfred | Journal Article |
| 2019 | Plastic Additives
Pfaendner, Rudolf | Book Article |
| 2019 | Poly (butyl acrylate)-graft-polystyrene synthesis by free-radical polymerization: Interplay between structure, morphology, mechanical, and optical properties
Fage, J.; Knoll, K.; Niessner, N.; Carstensen, O.; Schulz, T.; Malz, F.; Döring, M.; Schönberger, F. | Journal Article |
| 2019 | Polymer-induced metal diffusion during plastic processing: A reason for deposit formation
Sonnenberg, M.; Gustus, R.; Sedelmeier, S.; Wegewitz, L.; Höfft, O.; Wieser, J.; Maus-Friedrichs, W. | Journal Article |
| 2019 | Porous graphite as platform for the separation and characterization of synthetic polymers - an overview
Kot, David; Macko, Tibor; Arndt, Jan-Hendrik; Brüll, Robert | Journal Article |
| 2019 | Preload dependent material properties of lamination stacks for electric machines
Loos, Daniel; Barti, Endre; Wagener, Rainer; Melz, Tobias | Journal Article |
| 2019 | Quantitative FMEA and Functional Safety Metrics Evaluation in Bayesian Networks
Rauschenbach, Matthias; Nuffer, Jürgen | Conference Paper |
| 2019 | Richtungsabhängige Kennwerte
Roo, Tamara van; Dillenberger, Felix | Journal Article |
| 2019 | Schwingungsrisskorrosionsverhalten von Stählen in biogenen Kraftstoffen
Käfer, Sven; Schönborn, Steffen; Engler, T.; Melz, Tobias; Oechsner, M. | Conference Paper |
| 2019 | Simulation-based multi-objective optimization of a fuzzy controller for semi-active suspension
Balzer, Louis; Mees, Valentin; Millitzer, Jonathan; Lapiccirella, Giovanni | Conference Paper |
| 2019 | Simultaneous load and structural monitoring of a carbon fiber rudder stock: Experimental results from a quasi-static tensile test
Neuschwander, K.; Moll, J.; Memmolo, V.; Schmidt, M.; Bücker, M. | Journal Article |
| 2019 | Strukturelemente zur Berücksichtigung von Anisotropie und Inhomogenitäten in der rechnerischen Lebensdauerabschätzung von additiv gefertigten Bauteilen
Schnabel, Kai; Baumgartner, Jörg; Wagener, Rainer | Conference Paper |
| 2019 | A Study in Options to Improve Aerodynamic Profile of Heavy-Duty Vehicles in Europe
Hariram, Adithya; Koch, Thorsten; Mårdberg, Björn; Kyncl, Jan | Journal Article |
| 2019 | Studying the bivariate tacticity distribution of poly-1-octene using two-dimensional liquid chromatography coupled with NMR
Rode, K.; Malz, F.; Arndt, J.-H.; Macko, T.; Horchler, G.; Yu, Y.; Brüll, R. | Journal Article |
| 2019 | Synergistic flame retardant interplay of phosphorus containing flame retardants with aluminum trihydrate depending on the specific surface area in unsaturated polyester resin
Reuter, Jens; Greiner, Lara; Schönberger, Frank; Döring, Manfred | Journal Article |
| 2019 | Synergy between melamine cyanurate, melamine polyphosphate and aluminum diethylophosphinate in flame retarded thermoplastic polyurethane
Sut, Aleksandra; Metzsch-Zilligen, Elke; Großhauser, Michael; Pfaendner, Rudolf; Schartel, Bernhard | Journal Article |
| 2019 | Tadellos gefügt
Zeidler-Finsel, Anke | Journal Article |
| 2019 | Two control strategies for semi-active load path redistribution in a load-bearing structure
Gehb, Christopher Maximilian; Platz, Roland; Melz, Tobias | Journal Article |
| 2019 | Uncertainty quantification in the mathematical modelling of a suspension strut using Bayesian inference
Mallapur, Shashidhar; Platz, Roland | Journal Article |
| 2019 | Urban EV - Lebensdaueruntersuchungen an einem Elektro-Stadtfahrzeug mit Schwenkachse
Voigt, Thorsten; Lipp, Klaus; Melz, Tobias | Conference Paper |
| 2019 | Virtuelle Lebensdaueranalyse von Leichtbau-Strukturen unter Berücksichtigung des Steifigkeitsverhaltens im Betrieb
Rösch, Peter | Dissertation |
| 2019 | Werkstoffverhalten von Gussbauteilen
Bergner, Kim Martine | Journal Article |
| 2019 | Wireless Sensor Networks and Energy Harvesting for Energy Autonomous Smart Structures
Grasböck, Lukas; Humer, Alexander; Nader, Manfred; Schagerl, Martin; Mayer, Dirk; Misol, Malte; Humer, Christoph; Herold, Sven; Monner, Hans Peter | Conference Paper |
| 2018 | Active vibration reduction of ship propulsion systems
Bartel, Torsten; Herold, Sven; Infante, Francesco; Käsgen, Johannes; Matthias, Michael; Millitzer, Jonathan; Perfetto, Sara | Conference Paper |
| 2018 | Active vibration reduction on a quadrocopter
Bartel, T.; Atzrodt, H.; Wilczynski, D. | Conference Paper |
| 2018 | An active-system approach for eliminating the wolf note on a cello
Neubauer, Philipp; Tschesche, Johannes; Bös, Joachim; Melz, Tobias; Hanselka, Holger | Journal Article |
| 2018 | Additives: Secondary raw materials of the future
Schultheis, C.; Metzsch-Zilligen, E.; Pfaendner, R. | Journal Article |
| 2018 | Alternative formulations of standard criteria
Kolupaev, V.A. | Book Article |
| 2018 | Analyse des Schwingfestigkeitsverhaltens von drossbehaftetem Gusseisen mit Kugelgraphit
Bleicher, Christoph | Journal Article |
| 2018 | Anwendungspotential von Laserstrahl- und Laserhybridschweißnähten für Stumpfstoßverbindungen ultrahochfester Feinkornbaustähle
Seyfried, Benjamin; Möller, Benjamin; Knödel, Peter; Wagener, Rainer; Ummenhofer, Thomas; Melz, Tobias | Conference Paper |
| 2018 | Applications
Kolupaev, V.A. | Book Article |
| 2018 | Betriebsfestigkeit lasergeschweißter Stumpfnähte für den Einsatz in Kranstrukturen am Beispiel des Feinkornbaustahls S1100QL
Möller, Benjamin; Seyfried, Benjamin; Wagener, Rainer; Knödel, Peter; Melz, Tobias; Ummenhofer, T. | Conference Paper |
| 2018 | Bewertung der Schallabstrahlung dünnwandiger Strukturen anhand der Analyse der Strukturintensität
Schaal, Clarissa; Groba, Peter; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2018 | Characterization of the chemical composition distribution of polyolefin plastomers/elastomers (ethylene/1-octene copolymers) and comparison to theoretical predictions
Arndt, Jan-Hendrik; Brüll, Robert; Macko, Tibor; Garg, Praveen; Tacx, Jacques | Journal Article |
| 2018 | Charakterisierung variierter Randzonenzustände an Gussbauteilen und Bewertung des Einflusses auf die Ermüdungsfestigkeit
Bergner, Kim Martine; Bleicher, Christoph; Wagener, Rainer; Melz, Tobias | Conference Paper |
| 2018 | Combination of material characterization and cyclic fatigue testing for investigation of elastomer aging
Lellinger, Dirk; Kroth, Thomas; Reinhardt, Marc; Bitsch, Thorsten; Kühne, Kai; Rode, Karsten; Malz, Frank; Wallmichrath, Marc; Alig, Ingo | Book Article |
| 2018 | A comparative study of various joining techniques fatigue behaviour focusing on stiffness degradation
Rösch, Peter; Bruder, Thomas; Bein, Thilo | Journal Article, Conference Paper |
| 2018 | Comparison of strength criteria based on the measurements on concrete
Kolupaev, V.A.; Yu, M.-H.; Altenbach, H.; Bolchoun, A. | Journal Article |
| 2018 | Conditions and assumptions of strength criteria
Kolupaev, V.A. | Book Article |
| 2018 | Controlling the Morphology of Au–Pd Heterodimer Nanoparticles by Surface Ligands
Kluenker, M.; Connolly, B.M.; Marolf, D.M.; Nawaz Tahir, M.; Korschelt, K.; Simon, P.; Köhler, U.; Plana-Ruiz, S.; Barton, B.; Panthöfer, M.; Kolb, U.; Tremel, W. | Journal Article |
| 2018 | Correlation between comprehensive 2D liquid chromatography and Monte Carlo simulations for branched polymers
Apel, Nico; Ramakrishnan, Vaidyanath; Uliyanchenko, Elena; Moyses, Stephan; Wold, Christian; Macko, Tibor; Brüll, Robert | Journal Article |
| 2018 | Crack propagation in PE-HD induced by environmental stress cracking (ESC) analyzed by several imaging techniques
Schilling, Markus; Niebergall, Ute; Alig, Ingo; Oehler, Harald; Lellinger, Dirk; Meinel, Dietmar; Böhning, Martin | Journal Article |
| 2018 | Crash and durability of aluminum and mixed steel aluminum joints made by electromagnetic pulse welding
Huberth, F.; Klitschke, S.; Gall, M.; Sommer, S.; Schnabel, K.; Baumgartner, J. | Conference Paper |
| 2018 | Criteria of equivalent stress concept
Kolupaev, V.A. | Book Article |
| 2018 | Critical distance approach for the fatigue strength assessment of magnesium welded joints in contrast to Neuber's effective stress method
Karakaş, Ö.; Zhang, G.; Sonsino, C.M. | Journal Article |
| 2018 | Definition of a loading scenario and experimental verification on a material handlers load arm
Herbert, Andreas; Käsgen, Johannes | Conference Paper |
| 2018 | Design development of rotational energy harvesting vibration absorber (R-EHTVA)
Infante, F.; Kaal, W.; Perfetto, S.; Herold, S. | Conference Paper |
| 2018 | Design of an inertial mass actuator for active vibration control of a planetary gearbox using piezoelectric shear actuator
Zech, P.; Plöger, D.F.; Bartel, T.; Röglin, T.; Rinderknecht, S. | Conference Paper |
| 2018 | Development and design of multifunctional lightweight structures for satellite applications
Schubert, M.; Perfetto, S.; Dafnis, A.; Mayer, D.; Atzrodt, H. | Conference Paper |
| 2018 | Development and implementation of a multi-channel active control system for the reduction of road induced vehicle interior noise
Gäbel, Gunnar; Millitzer, Jonathan; Atzrodt, Heiko; Herold, Sven; Mohr, Andreas | Journal Article |
| 2018 | Digitaler Zwilling eines servohydraulischen Prüfstands zur Durchführung virtueller Prüfungen an mechatronischen Wankstabilisatoren
Landersheim, Volker; Fischer, Felix; Möller, Ricardo; Huang, Ha; Awad, Hasan | Conference Paper |
| 2018 | Dimensionless values for comparison
Kolupaev, V.A. | Book Article |
| 2018 | Effect of static axial loads on the lateral vibration attenuation of a beam with piezo-elastic supports
Götz, Benedict; Platz, Roland; Melz, Tobias | Journal Article |
| 2018 | Effect of the material modeling and the experimental material characterisation on fatigue life estimation within strain-based fatigue assessment approaches
Hell, Matthias; Wagener, Rainer; Kaufmann, Heinz; Melz, Tobias | Journal Article |
| 2018 | Efficient and parametric digital twins for system engineering applications
Tamm, Christoph | Conference Paper |
| 2018 | Effiziente phosphorhaltige Stabilisatoren auf Basis von Diphenyl-amin und heterocyclischer Diphenylamin-Derivate
Briesenick, Max; Ciesielski, Michael; Pfaendner, Rudolf | Patent |
| 2018 | Einfluss der metallurgischen Eigenschaften der Gesenkteilungsebene auf die Schwingfestigkeit warm massivumgeformter Stahlbauteile
Wagener, Rainer; Scurria, Matilde; Möller, Benjamin; Schuster, J. | Conference Paper |
| 2018 | Einflüsse auf das zyklische Spannungs-Dehnungsverhalten von additiv gefertigten Strukturen aus AlSi10Mg
Wagener, Rainer; Scurria, Matilde; Möller, Benjamin | Conference Paper |
| 2018 | Einflüsse der Oberflächenbehandlung und Aufbaurichtung auf das zyklisch Spannungs-Dehnungs-Verhalten von additiv gefertigten Strukturen aus Inconel 718
Scurria, Matilde; Möller, Benjamin; Wagener, Rainer; Melz, Tobias | Conference Paper |
| 2018 | Electrochemical characterization of automotive aluminum alloys regarding their corrosion fatigue behavior
Engler, T.; Andersohn, G.; Oechsner, M.; Araújo, F.D. de; Kaufmann, H.; Melz, T. | Journal Article |
| 2018 | Enhanced lightweight design by composites - results of the EU project ENLIGHT
Mayer, Dirk; Bein, Thilo; Buff, Hendrik; Götz, Benedict; Schwarzhaupt, Oliver; Spancken, Dominik | Journal Article |
| 2018 | Entwicklung einer robusten Berechnungsmethode zur Bestimmung der Strukturintensität von dünnwandigen, gekrümmten Bauteilen unter Zuhilfenahme virtueller Messdaten
Kleinfeller, Nikolai; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2018 | Entwicklung passiver und aktiver Maßnahmen zur Minderung der Schalltransmission durch Doppelglas-Fensterscheiben
Klaus, Tim Bastian | Dissertation |
| 2018 | Equivalent stress concept for limit state analysis
Kolupaev, Vladimir, A. | Book |
| 2018 | Estimation of power input and output of structures using structural intensity measurements
Groba, Peter; Ebert, Johannes; Stoewer, Torsten; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2018 | Experimental characterisation of a flat dielectric elastomer loudspeaker
Rustighi, Emiliano; Kaal, William; Herold, Sven; Kubbara, Ahmed | Journal Article |
| 2018 | Experimentelle und numerische Ermittlung der Verbundsteifigkeiten und thermischen Ausdehnung von Kupferwicklungen
Loos, D.; Barti, E.; Wagener, R.; Melz, Tobias | Conference Paper |
| 2018 | Experimentelle Untersuchung der Ähnlichkeit skalierter Plattenstrukturen
Adams, Christian; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2018 | Experiments and equipment
Kolupaev, V.A. | Book Article |
| 2018 | Fatigue assessment of EMPT-welded joints using the reference radius concept
Baumgartner, J.; Schnabel, K.; Huberth, F. | Journal Article, Conference Paper |
| 2018 | Fatigue behaviour of aluminium tube crimp connections applying the electromagnetic pulse technology
Lipp, Klaus; Schaefer, R.; Horwatitsch, D. | Journal Article, Conference Paper |
| 2018 | Fatigue life curve - a continuous Wöhler curve from LCF to VHCF
Wagener, Rainer; Melz, Tobias | Journal Article |
| 2018 | Fitting of criteria
Kolupaev, V.A. | Book Article |
| 2018 | Formulations of classical strength hypotheses
Kolupaev, V.A. | Book Article |
| 2018 | Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit. Jahresbericht 2017
| Annual Report |
| 2018 | Frequency and temperature dependent stiffness and damping properties of reduced viscoelastic structures using component mode synthesis (CMS)
Somesan, Vlad; Barti, Endre; Bein, Thilo | Report |
| 2018 | From Single Molecules to Nanostructured Functional Materials
Nawaz Tahir, M.; Kluenker, M.; Natalio, F.; Barton, B.; Korschelt, K.; Shylin, S.I.; Panthöfer, M.; Ksenofontov, V.; Möller, A.; Kolb, U.; Tremel, W. | Journal Article |
| 2018 | Gain-scheduled H∞ buckling control of a circular beam-column subject to time-varying axial loads
Schäffner, Maximilian; Platz, Roland | Journal Article |
| 2018 | Generalized cavitation criterion for poro-hyperelastic materials
Drass, M.; Kolupaev, V.; Rosendahl, P.L.; Schneider, J.; Becker, W. | Conference Paper |
| 2018 | Generalized pressure-insensitive criteria
Kolupaev, V.A. | Book Article |
| 2018 | Generalized pressure-sensitive criteria
Kolupaev, V.A. | Book Article |
| 2018 | Grundlagen für die Bemessung druckwasserexponierter Komponenten unter Berücksichtigung werkstoffspezifischer Eigenschaften und Schädigungsmechanismen
Schmiedl, Tobias; Melz, Tobias | Conference Paper |
| 2018 | Hybrid materials - Joining of polymers and metals
Spancken, Dominik; Laveuve, Dominik M.; Beck, J.; Stötzner, Norbert; Straeten, Kira van der; Büter, Andreas; Henning, Frank | Conference Paper |
| 2018 | Implementation of a modular model for active engine mounts and coupling with a reduced model for full-vehicle NVH-simulation
Grimm, A.; Finger, Karsten; Stoll, G.; Atzrodt, H.; Herold, S. | Conference Paper |
| 2018 | Influence of different load histories on the cyclic material behavior of nodular cast iron for thick-walled application
Bleicher, C. | Journal Article |
| 2018 | Influence of salt corrosion on the fatigue behaviour of aluminium alloys for chassis components under constant and variable amplitude loading
Duarte de Araújo, F.; Engler, T.; Andersohn, G.; Oechsner, M.; Kaufmann, H.; Schönborn, S.; Melz, T. | Journal Article, Conference Paper |
| 2018 | Innovative testing process for electric powertrains
Nickel, D.; Stelter, E.; Sültrop, C.; Mittmann, W.; Heiduczek, T.; Hohenner, H. | Conference Paper |
| 2018 | Introduction
Kolupaev, V.A. | Book Article |
| 2018 | Iron Oxide Superparticles with Enhanced MRI Performance by Solution Phase Epitaxial Growth
Kluenker, M.; Tahir, M.N.; Dören, R.; Deuker, M.; Komforth, P.; Plana-Ruiz, S.; Barton, B.; Shylin, S.I.; Ksenofontov, V.; Panthöfer, M.; Wiesmann, N.; Herzberger, J.; Möller, A.; Frey, H.; Brieger, J.; Kolb, U.; Tremel, W. | Journal Article |
| 2018 | Isogonal and isotoxal hexagons as extremal yield figures
Altenbach, H.; Rosendahl, P.L.; Becker, W.; Kolupaev, V.A. | Abstract |
| 2018 | Lightweight Automobiles ALLIANCE Project: First Results of Environmental and Economic Assessment from a Life-Cycle Perspective
Delogu, Massimo; Pero, Francesco del; Zanchi, Laura; Ierides, Marcos; Fernandez, Violeta; Seidel, Kristian; Thirunavukkarasu, Dinesh; Bein, Thilo | Report |
| 2018 | Eine Methode zur Festigkeitsbeurteilung von laserstrahlgeschweißten Magnesium-Verbindungen unter mehrachsigen Beanspruchungen mit konstanten und variablen Amplituden
Bolchoun, Alexandre | Dissertation |
| 2018 | Modellbasierte Gleitzustandsansätze zur Regelung von Ruckelschwingungen in Fahrzeugantriebssträngen
Yousif, Leonard | Dissertation |
| 2018 | Monomere in den Adern
Klein, Roland; Popzyk, Marie-Isabel; Burlon, Konrad; Wennemann, Katharina; Karl, Janis; Köhler, Thomas; Wischnowski, Marko; Gries, Thomas | Journal Article |
| 2018 | Monomers coursing through the veins
Klein, R.; Popzyk, M.-I.; Burlon, K.; Wennemann, K.; Karl, J.; Köhler, T.; Wischnowski, M.; Gries, T. | Journal Article |
| 2018 | Multi-surface criteria
Kolupaev, V.A. | Book Article |
| 2018 | Multifunctional and lightweight load-bearing composite structures for satellites
Schubert, M.; Perfetto, S.; Dafnis, A.; Atzrodt, H.; Mayer, D. | Conference Paper |
| 2018 | New developments in flame-retardant polystyrene foams
Döring, M. | Conference Paper |
| 2018 | Novel N-phosphorylated iminophosphoranes based on 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide
Weinert, Michael; Fuhr, Olaf; Döring, Manfred | Journal Article |
| 2018 | Novel organophosphorus flame retardants and their synergistic application in novolac epoxy resin
Schmidt, Christian; Ciesielski, Michael; Greiner, Lara; Döring, Manfred | Journal Article |
| 2018 | Nucleation activity at high supercooling: Sorbitol-type nucleating agents in polypropylene
Schawe, Jürgen E.K.; Budde, Felix; Alig, Ingo | Journal Article |
| 2018 | On cavitation in transparent structural silicone adhesive: TSSA
Drass, Michael; Kolupaev, Vladimir A.; Schneider, Jens; Kolling, Stefan | Journal Article |
| 2018 | Online listening test to evaluate the gear mesh noise of inequidistant gearings
Neubauer, Philipp; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2018 | Optimization of a vibration absorber with piezoelectric energy harvesting capabilities
Perfetto, Sara | Dissertation |
| 2018 | Passive, adaptive, active vibration control, and integrated approaches
Mayer, Dirk; Herold, Sven | Book Article |
| 2018 | Phosphorus Containing Polymers as Flame Retardants
Döring, Manfred | Abstract |
| 2018 | Preliminary acousto-ultrasonic investigation for multi-parameter transducer self-diagnostic system in composites
Memmolo, V.; Park, Y.J.; Lilov, M.; Monaco, E.; Ricci, F. | Journal Article |
| 2018 | Prognostics and health monitoring for ECU based on piezoresistive sensor measurements
Palczynska, Alicja | Dissertation |
| 2018 | Quantification of uncertainty in the mathematical modelling of a multivariable suspension strut using bayesian interval hypothesis-based approach
Mallapur, Shashidhar; Platz, Roland | Conference Paper |
| 2018 | Rapid mass calorimeter as a high-throughput screening method for the development of flame-retarded TPU
Sut, Aleksandra; Metzsch-Zilligen, Elke; Großhauser, Michael; Pfaendner, Rudolf; Schartel, Bernhard | Journal Article |
| 2018 | Recent developments in hardware-in-the-loop testing
Millitzer, Jonathan; Mayer, Dirk; Henke, Christian; Jersch, Torben; Tamm, Christoph; Michael, Jan; Ranisch, Christopher | Conference Paper |
| 2018 | Rechnerische Lebensdauerabschätzung mit Berücksichtigung der Ergebnisse aus Umformsimulationen
Störzel, Klaus; Kraemer, F.; Bernhard, Julian; Oechsner, M. | Conference Paper |
| 2018 | Scaling laws obtained from a sensitivity analysis and applied to thin vibrating structures
Adams, Christian; Bös, Joachim; Slomski, Elena M.; Melz, Tobias | Journal Article |
| 2018 | Schwingfestigkeitsbewertung von additiv gefertigten metallischen Bauteilen
Schnabel, Kai; Baumgartner, Jörg; Choccia, Andreas | Conference Paper |
| 2018 | Sekundärrohstoffe der Zukunft
Schultheis, Christoph; Metzsch-Zilligen, Elke; Pfaendner, Rudolf | Journal Article |
| 2018 | Separation of branched Poly(bisphenol A carbonate) structures by solvent gradient at near-critical conditions and two-dimensional liquid chromatography
Apel, Nico; Uliyanchenko, Elena; Moyses, Stephan; Rommens, Stijn; Wold, Christian; Macko, Tibor; Brüll, Robert | Journal Article |
| 2018 | Simulink-PSpice co-simulation of power amplifier for driving piezoelectric actuators
Park, Y.; Bartel, T.; Röglin, T.; Stoll, G.M.; Zech, P.; Plöger, D.; Rinderknecht, S. | Conference Paper |
| 2018 | Stability, performance and power consumption of a centralised and decentralised active vibration control system
Lapiccirella, Giovanni; Rohlfing, Jens | Conference Paper |
| 2018 | Strength criteria for concrete and their comparison with experiments
Altenbach, Holm; Kolupaev, Vladimir | Conference Paper |
| 2018 | Structural health monitoring of composite aerospace structures with acoustic emission
Lehmann, Martin; Büter, Andreas; Schwarzhaupt, Oliver; Contell Asins, Conchin | Conference Paper |
| 2018 | Study of crack initiation and crack propagation of short fiber reinforced polyamide
Decker, J.; Schwarzhaupt, O.; Herkenrath, L.M.; Spancken, D.; Büter, A. | Conference Paper |
| 2018 | Summary and outlook
Kolupaev, V.A. | Book Article |
| 2018 | TRANSFORMERS - Configurable and Adaptable Trucks and Trailers for Optimal Transport
Adams, Paul; Nitzsche, Gunter; Löfstrand, Sofia; Selas, A.; Arts, G.; Adesiyun, A.; Wagner, S.; Koch, T.; Jacob, B.; Schmidt, F.; Billiet, M.; Hariram, A.; Queckenstedt, B.; Koornneef, G.; Zweep, C. van der; Bertens, T.; Hillbrand, B. | Conference Paper |
| 2018 | Uncertainty quantification in case of imperfect models: A non-bayesian approach
Kohler, Michael; Krzyzak, Adam; Mallapur, Shashidhar; Platz, Roland | Journal Article |
| 2018 | Variantenvielfalt durch additiv gefertigte Bauteile
Schnabel, Kai; Möller, Benjamin | Book Article |
| 2018 | Verfahren zur Erniedrigung der Kristallisationstemperatur von teilkristallinen Polyamiden, hierdurch hergestellte Polyamidformmasse sowie Verwendung von mehrfunktionellen umesterungsfähigen organischen Phosphoniten, organischen Phosphiten, organischen Phosphaten bzw. Mischungen hiervon zur Erniedrigung der Kristallisationstemperatur, zur Vernetzung und/oder Verzweigung von teilkristallinen Polyamiden
Groos, Benjamin; Pfaendner, Rudolf | Patent |
| 2018 | Verfahren zur Herstellung eines Polymerisates durch Nitroxyl-kontrollierte Polymerisation sowie Polymerisat
Burlon, Konrad; Klein, Roland; Mazurowski, Markus; Pfaendner, Rudolf; Wittemann, Matthias | Patent |
| 2018 | Verpackungssystem sowie Verfahren zum Verpacken von Stückgut
Berges, Claudia; Berges, Dirk; Metzsch-Zilligen, Elke; Pfaendner, Rudolf | Patent |
| 2018 | Visualization methods
Kolupaev, V.A. | Book Article |
| 2018 | Visualization of standard criteria
Kolupaev, V.A. | Book Article |
| 2018 | Wandlerelement
Hansmann, Jan; Herold, Sven; Jungblut, Timo; Kaal, William; Stoll, Georg Maximilian | Patent |
| 2018 | Welche Materialien stabil bleiben
Schultheis, Christoph; Großhauser, Michael; Metzsch-Zilligen, Elke; Pfaendner, Rudolf | Journal Article |
| 2018 | Wie wirksam sind Haftvermittler?
Arndt, Jan-Hendrik; Brüll, Robert | Journal Article |
| 2018 | Zielgrößenbestimmung zur Durchführung einer Sensitivitätsanalyse bei der Absorptionsgradmessung im Kundt’schen Rohr
Wenzel, Sören; Grebel, Antje; Slomski-Vetter, Elena; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2018 | Zur Beurteilung der Betriebsfestigkeit von Gusseisen mit Kugelgraphit unter Beanspruchungszeitfunktionen mit Überlasten
Bleicher, Christoph; Kaufmann, Heinz; Wagener, Rainer; Melz, Tobias | Conference Paper |
| 2018 | Zuverlässigkeitsabsicherung eines Kontrolldisplays für Medizinanwendungen
Nuffer, Jürgen | Book Article |
| 2017 | 35th IMAC, a Conference and Exposition on Structural Dynamics 2017. Proceedings. Vol.3: Model validation and uncertainty quantification. Preface
Barthorpe, R.; Platz, R.; Lopez, I.; Moaveni, B.; Papadimitriou, C. | Conference Paper |
| 2017 | Ableitung einer kontinuierlichen Bemessungswöhlerlinie von der Kurzzeitfestigkeit bis in die Langzeitfestigkeit
Wagener, Rainer; Melz, Tobias | Conference Paper |
| 2017 | Active vibration isolation with a dielectric elastomer stack actuator
Kaal, W.; Bartel, T.; Herold, S. | Journal Article |
| 2017 | Akustik 3D-gedruckter Zahnräder
Neubauer, Philipp; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2017 | Eine Analyse des Anwendungspotenzials von piezoelektrischen Netzwerken im Maschinenbau
Heuss, Oliver | Dissertation |
| 2017 | Analysis of the energy exchange between coupled subsystems by means of the divergence in the vibratory energy field
Groba, Peter; Ebert, Johannes; Stoewer, Torsten; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2017 | Anordnung und Verfahren zur Beeinflussung und/oder Detektion einer dynamischen oder statischen Eigenschaft einer Tragstruktur
Mayer, Dirk; Salloum, Rogério | Patent |
| 2017 | An approach for the design of a mechanical Hardware-in-the-Loop interface
Millitzer, Jonathan; Ranisch, Christopher; Tamm, Christoph; Bartolozzi, Riccardo; Melz, Tobias | Conference Paper |
| 2017 | Approach to prove the efficiency of the Monte Carlo method combined with the elementary effect method to quantify uncertainty of a beam structure with piezo-elastic supports
Li, S.; Goetz, B.; Schaeffner, M.; Platz, R. | Conference Paper |
| 2017 | Bayesian inference approach to evaluate the uncertainty in the mathematical modelling of a suspension strut
Mallapur, Shashidhar; Platz, Roland | Conference Paper |
| 2017 | A benchmark case for structural intensity calculations
Adams, Christian; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2017 | Beurteilung der Schwingfestigkeit von lunkerbehaftetem Gusseisen mit Kugelgrafit aus Röntgenbildern
Bleicher, Christoph | Journal Article |
| 2017 | Bewertung der Betriebsfestigkeit sicherheitsrelevanter, hartgelöteter Fügeverbund
Melz, Tobias; Tillmann, Wolfgang; Bobzin, Kirsten; Baumgartner, J.; Manke, M.; Sievers, N.; Wiesner, S.; Schütt, T. | Conference Paper |
| 2017 | Bewertung des Einflusses von Extremlasten auf das zyklische Werkstoffverhalten von Gusseisen mit Kugelgraphit
Bleicher, Christoph; Wagener, Rainer; Melz, Tobias | Conference Paper |
| 2017 | Combination of cyclic fatigue testing and materials characterisation to investigate ageing of elastomers
Kroth, T.; Lellinger, D.; Alig, Ingo; Wallmichrath, Marc | Journal Article |
| 2017 | Comparison of control strategies for global load path redistribution in a load-bearing structure
Gehb, Christopher; Platz, Roland; Melz, Tobias | Conference Paper |
| 2017 | Comparison of sampling techniques for global sensitivity analyses of scaled vibrating structures
Adams, Christian; Bös, Joachim; Slomski, Elena M.; Melz, Tobias | Conference Paper |
| 2017 | Computer-Integrated Engineering and Design
Martins, T.W.; Abedini, S.; Ahmels, L.; Albrecht, K.; Anderl, R.; Bruder, E.; Groche, P.; Kaufmann, H.; Mahajan, P.; Melz, T.; Özel, M.; Pouriayevali, H.; Reising, J.; Schäfer, S.; Tijani, Y.; Tomasella, A.; Xu, B.-X. | Book Article |
| 2017 | Connected testing of electric powertrains
Schyr, Christian; Stelter, Eva; Sültrop, Christian | Conference Paper |
| 2017 | Consistent approach to describe and evaluate uncertainty in vibration attenuation using resonant piezoelectric shunting and tuned mass dampers
Götz, Benedict; Platz, Roland; Melz, T. | Journal Article |
| 2017 | Cyclic Material Behavior of High-Strength Steels Used in the Fatigue Assessment of Welded Crane Structures with a Special Focus on Transient Material Effects
Möller, B.; Tomasella, A.; Wagener, R.; Melz, T. | Journal Article |
| 2017 | Deriving a continuous fatigue life curve from LCF to VHCF
Wagener, R.; Melz, T. | Report |
| 2017 | Description and evaluation of uncertainty in the early development phase of a beam-column system subjected to passive and active buckling control
Mallapur, S.; Platz, Roland | Conference Paper |
| 2017 | Design of functionally graded joints using a polyurethane-based adhesive with varying amounts of acrylate
Stapleton, S.E.; Weimer, J.; Spengler, J. | Journal Article |
| 2017 | Development and experimental verification of a corrosion fatigue assessment method for highly-stressed engine components in E85 biofuel
Käfer, S.; Melz, T.; Kaufmann, H.; Engler, C.T.; Anderson, G.; Oechsner, M. | Conference Paper |
| 2017 | Development of a multiaxial test environment for highly dynamically loaded mechatronic components
Vrbata, J.; Atzrodt, H.; Kimpel, T.; Koch, T.; Mayer, D. | Conference Paper |
| 2017 | Effect of Graphite Nanoplate Morphology on the Dispersion and Physical Properties of Polycarbonate Based Composites
Müller, M.T.; Hilarius, K.; Liebscher, M.; Lellinger, D.; Alig, I.; Pötschke, P. | Journal Article |
| 2017 | Einfluss der Gusshaut auf das Schwingfestigkeitsverhalten von Gusseisen mit Kugelgraphit
Schönborn, Steffen; Melz, Tobias | Conference Paper |
| 2017 | Electrochemical characterization of automotive aluminum alloys regarding their corrosion fatigue behavior
Engeler, T.; Araújo, Francisco; Andersohn, G.; Kaufmann, Heinz; Melz, Tobias; Oechsner, M. | Conference Paper |
| 2017 | Enhance lightweight design by composites - results of the EU project ENLIGHT
Mayer, Dirk; Bein, Thilo; Buff, Hendrik; Götz, Benedict; Schwarzhaupt, Oliver; Spancken, Dominik | Conference Paper |
| 2017 | Environmental stress cracking of polyethylene high density (PE-HD) induced by liquid media - validation and verification of the full-notch creep test (FNCT)
Schilling, M.; Böhning, M.; Oehler, Harald; Alig, Ingo; Niebergall, U. | Journal Article |
| 2017 | Evaluation of the Influence of MnS in Forged Steel 38MnVS6 on Fatigue Life
Scurria, M.; Emre, S.; Möller, B.; Wagener, R.; Melz, T. | Journal Article |
| 2017 | Experimental results and fatigue life evaluation of magnesium laserbeam-welded joints under proportional and non-proportional multiaxial fatigue loading with variable amplitudes
Bolchoun, A.; Sonsino, C.M.; Kaufmann, H.; Melz, T. | Journal Article |
| 2017 | Fatigue Assessment of Nodular Cast Iron with Material Imperfections
Bleicher, C.; Wagener, R.; Kaufmann, H.; Melz, T. | Journal Article |
| 2017 | Fatigue assessment of PM components considering the highly stressed volume approach and mechanical properties
Haberlick, Etienne; Lipp, Klaus | Journal Article |
| 2017 | Fatigue assessment of thick-walled nodular cast iron with regard to highly loaded machine structures using the strainlife approach
Hesseler, Jan; Bleicher, Christoph; Baumgartner, Jörg; Schnabel, Kai; Wagener, Rainer; Kaufmann, Heinz; Melz, Tobias | Conference Paper |
| 2017 | Fatigue assessment with special respect to size effects and material behavior within local strain-based approaches
Hell, M.; Wagener, R.; Kaufmann, H.; Melz, T. | Report |
| 2017 | Fatigue lifetime assessment of aluminium alloys for chassis components under corrosive environments
Araújo, Francisco; Engler, T.; Kaufmann, Heinz; Schönborn, Steffen; Andersohn, G.; Melz, Tobias; Oechsner, M. | Conference Paper |
| 2017 | Fatigue performance of additive manufactured TiAl6V4 using electron and laser beam melting
Greitemeier, D.; Palm, F.; Syassen, F.; Melz, T. | Journal Article |
| 2017 | Fatigue strength assessment of laser welded thin-walled joints made of mild and high strength steel
Marulo, G.; Baumgartner, Jörg; Frendo, F. | Journal Article |
| 2017 | Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit. Jahresbericht 2016
| Annual Report |
| 2017 | Funktionsintegrierter Leichtbauquerlenker
Töws, Paul; Spancken, Dominik; Schwarzhaupt, Oliver; Herkenrath, Mavie; Büter, Andreas | Conference Paper |
| 2017 | Generalized strength criteria as functions of the stress angle
Kolupaev, Vladimir, A. | Journal Article |
| 2017 | Global load path adaption in a simple kinematic load-bearing structure to compensate uncertainty of misalignment due to changing stiness conditions of the structure's supports
Gehb, Christopher; Platz, Roland; Melz, Tobias | Conference Paper |
| 2017 | Herleitung von Modellgesetzen schwingender Strukturen mittels Sensitivitätsanalyse am Beispiel einer gelenkig gelagerten Rechteckplatte
Adams, Christian; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2017 | Hochfrequenzprüfstände für die Charakterisierung von Aggregatlagern
Fiebig, N.; Schmidt, Matthias | Conference Paper |
| 2017 | Hybride Leichtbauhinterachse für Elektrofahrzeuge
Becker, Paul; Büter, Andreas | Journal Article |
| 2017 | Industrial IoT: Potentiale für die dezentrale Schwingungsdiagnose
Kloepfer, Jannes; Koch, Michael; Bartel, Torsten; Friedmann, A. | Conference Paper |
| 2017 | Influence of different load histories on the cyclic material behavior of nodular cast iron for thick-walled application
Bleicher, Christoph; Wagener, Rainer; Kaufmann, Heinz; Melz, Tobias | Conference Paper |
| 2017 | Insulating sandwich housing structures for the thermal management of battery packs
Weidmann, F. | Conference Paper |
| 2017 | Interpenetrating polymer networks formed by cyanate esters and phenylethynyl-terminated imides
Meier, C.; Parlevliet, P.P.; Döring, M. | Journal Article |
| 2017 | Kopplung von zyklischen Betriebsfestigkeitsuntersuchungen und Materialcharakterisierung zur Untersuchung der Elastomeralterung
Kroth, T.; Lellinger, D.; Alig, Ingo; Wallmichrath, Marc | Journal Article |
| 2017 | Lasertechnik für den Leichtbau - Materialhybride aus Kunststoff und Metall
Spancken, Dominik; Straeten, K. van der; Beck, J.; Hofmann, S.; Büter, Andreas | Conference Paper |
| 2017 | Lateral vibration attenuation of a beam with piezo-elastic supports subject to varying axial tensile and compressive loads
Götz, Benedict; Platz, Roland; Melz, Tobias | Conference Paper |
| 2017 | Leichtbau mit Sandwichstrukturen. Sandwichstruktur mit integrierter thermischer Funktion
Geiling, M.; Schwarzhaupt, O.; Asins, C.C. | Journal Article |
| 2017 | Lignin a sustainable and renewable flame retardant for abs
Bourbigot, S.; Fontaine, G.; Prieur, B.; Wittemann, M.; Klein, R. | Conference Paper |
| 2017 | Linear Parameter-Varying (LPV) buckling control of an imperfect beam-column subject to time-varying axial loads
Schäffner, Maximilian; Platz, Roland | Conference Paper |
| 2017 | Longtime monitoring with smart sensor networks: The case of the Zwartewaterbrug
Siebel, T.; Friedmann, A.; Strobel, W.; Guse, M.; Hartmann, A. | Conference Paper |
| 2017 | Low cycle fatigue life assessment of welded high-strength structural steels based on nominal and local design concepts
Möller, B.; Baumgartner, J.; Wagener, R.; Kaufmann, H.; Melz, T. | Journal Article |
| 2017 | Low cycle fatigue of short fibre reinforced polyamides
Stötzner, Norbert; Büter, Andreas; Spancken, Dominik; Laveuve, Dominik | Conference Paper |
| 2017 | Manufacturing Induced Properties
Ahmels, L.; Bott, A.-K.; Bruder, E.; Gibbels, M.; Gramlich, S.; Hansmann, M.; Karin, I.; Kohler, M.; Lipp, K.; Melz, T.; Müller, C.; Neufeld, D.; Niehuesbernd, J.; Roos, M.; Tomasella, A.; Ulbrich, S.; Wagener, R.; Walter, A. | Book Article |
| 2017 | Messunsicherheit im Kundtschen Rohr
Grebel, Anja; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2017 | Die Methodik-Lücke geschlossen. Zuverlässigkeitsbewertung von Leistungselektronik
Nuffer, Jürgen; Pfeiffer, Thomas; Rauschenbach, Matthias; Holz, Johannes; Stoll, Georg | Journal Article |
| 2017 | Modeling of moisture-induced stress in PMMA: A simple approach to consider sorption behavior in FEM
Geertz, Guru; Wieser, Jürgen; Alig, Ingo; Heinrich, Gert | Journal Article |
| 2017 | Modellierung quellungsbedingter Spannungen in PMMA mittels FEM unter Berücksichtigung von Sorptionsisothermen
Geertz, Guru | Dissertation |
| 2017 | Modelling of contact interfaces using non-homogenous discrete elements to predict dynamical behaviour of assembled structures
Sharma, Anuj | Dissertation |
| 2017 | Multi axial fatigue design of laser welded plastic parts
Spancken, Dominik; Laveuve, Dominik; Büter, Andreas; Henning, Frank | Conference Paper |
| 2017 | Multiaxial fatigue assessment for automotive safety components of cast aluminium EN AC-42000 T6 (G-AlSi7Mg0.3 T6) under constant and variable amplitude loading
Sonsino, Cetin Morris; Franz, Roland | Journal Article |
| 2017 | Multiaxial vibration testing of inertia force related components of ev
Debes, Christian; Zinke, Rüdiger; Dautfest, Alexander; Karthikeyan, Ashwin; Melz, Tobias | Conference Paper |
| 2017 | Multifunctional load carrying lightweight structures for space design
Schubert, M.; Perfetto, Sara; Dafnis, A.; Mayer, Dirk; Atzrodt, Heiko; Schröder, K.-U. | Conference Paper |
| 2017 | A new method for fatigue life evaluation under out-of-phase variable amplitude loadings and its application to thin-walled magnesium welds
Bolchoun, A.; Baumgartner, J.; Kaufmann, H. | Journal Article |
| 2017 | Non-destructive characterization of fiber orientation in reinforced SMC as input for simulation based design
Schladitz, Katja; Büter, Andreas; Godehardt, Michael; Wirjadi, Oliver; Fleckenstein, Johanna; Gerster, Tobias; Hassler, Ulf; Jaschek, Katrin; Maisl, Michael; Maisl, Ute; Mohr, Stefan; Netzelmann, Udo; Potyra, Tobias; Steinhauser, Martin O. | Journal Article |
| 2017 | Non-probabilistic uncertainty evaluation in the concept phase for airplane landing gear design
Platz, Roland; Götz, Benedict | Conference Paper |
| 2017 | Nucleation efficiency of fillers in polymer crystallization studied by fast scanning calorimetry: Carbon nanotubes in polypropylene
Schawe, J.E.K.; Pötschke, P.; Alig, I. | Journal Article |
| 2017 | Numerische Schwingfestigkeitsanalyse von Widerstandspunktschweißungen
Lohse, Sebastian | Dissertation |
| 2017 | Observations by evaluating the uncertainty of stress distribution in truss structures based on probabilistic and possibilistic methods
Li, Sushan; Platz, Roland | Journal Article |
| 2017 | Optimal placement of six inertial mass actuators for MIMO active vibration control on a laboratory truss structure
Lapiccirella, Giovanni; Rohlfing, Jens; Tehrani, M.G. | Conference Paper |
| 2017 | Performance and power consumption of a decentralized velocity feedback control system with six inertial mass actuators on a laboratory truss structure
Lapiccirella, Giovanni; Rohlfing, Jens | Conference Paper |
| 2017 | Phase behavior of mixtures - High-throughput small angle light scattering for rapid determination of phase behavior of multicomponent systems
Steinhoff, Bernd; Philipp, Katrin; Alig, Ingo; Matmour, Rachid; Dronet, Severin | Journal Article |
| 2017 | Phosphorylation of lignin: Characterization and investigation of the thermal decomposition
Prieur, B.; Meub, M.; Wittemann, M.; Klein, R.; Bellayer, S.; Fontaine, G.; Bourbigot, S. | Journal Article |
| 2017 | Physikalische Modellbildung für das Additive Sintern von Kunststoffmaterialien
Wohlgemuth, Florian; Alig, Ingo | Book Article |
| 2017 | Piezoresistive Silicon Stress Sensor As a Tool to Monitor Health of an Electronic System
Palczynska, A.; Prisacaru, A.; Gromala, P.; Han, B.; Mayer, D.; Melz, T. | Conference Paper |
| 2017 | Polybenzimidazole-based block copolymers: From monomers to membrane electrode assemblies for high temperature polymer electrolyte membrane fuel cells
Schönberger, F.; Qian, G.; Benicewicz, B.C. | Journal Article |
| 2017 | Quantification and evaluation of uncertainty in the mathematical modelling of a suspension strut using Bayesian model validation approach
Mallapur, S.; Platz, Roland | Conference Paper |
| 2017 | Remote mechanical vibration sensing: A comparison between CW-doppler radar and laser-doppler vibrometer measurements
Shrestha, A.; Kumar, R.; Dornuf, F.; Moll, J.; Krozer, V.; Schmidt, Matthias | Conference Paper |
| 2017 | The Result: A New Design Paradigm
Roos, M.; Abedini, S.; Abele, E.; Albrecht, K.; Anderl, R.; Gibbels, M.; Gramlich, S.; Groche, P.; Horn, B.; Hoßfeld, A.; Köhler, S.; Lüthen, H.; Mattmann, I.; Melz, T.; Monnerjahn, V.; Müller, C.; Neuwirth, M.; Niehuesbernd, J.; Özel, M.; Pfetsch, M.; Reising, J.; Schäfer, S.; Schmidt, S.; Turan, E.; Ulbrich, S.; Wagner, C.; Walter, A.; Martins, T.W.; Zimmermann, A. | Book Article |
| 2017 | Review and considerations on the fatigue assessment of welded joints using reference radii
Baumgartner, J. | Journal Article |
| 2017 | Schwingungsrisskorrosionsverhalten von Stählen in biogenen Kraftstoffen
Käfer, Sven; Melz, Tobias | Conference Paper |
| 2017 | Selective chromatographic separation of polycarbonate according to hydroxyl end-groups using a porous graphitic carbon column
Apel, Nico; Uliyanchenko, E.; Moyses, S.; Rommens, S.; Wold, C.; Macko, Tibor; Rode, Karsten; Brüll, Robert | Journal Article |
| 2017 | Simulation of the scenario of the biaxial wheel fatigue test
Santiciolli, F.M.; Möller, R.; Krause, I.; Dedini, F.G. | Journal Article |
| 2017 | Single-source macroporous hybrid materials by melt-shear organization of core-shell particles
Vowinkel, S.; Malz, F.; Rode, K.; Gallei, M. | Journal Article |
| 2017 | Structural intensity research at TU Darmstadt
Bös, Joachim; Melz, Tobias | Conference Paper |
| 2017 | Synthesis of a new phosphorylated ethylamine, thereon based phosphonamidates and their application as flame retardants
Garth, Kim; Klinkowski, Christoph; Fuhr, Olaf; Döring, Manfred | Journal Article |
| 2017 | Testing and evaluation of a suspension arm with integrated functions
Spancken, Dominik; Büter, Andreas; Töws, Paul; Schwarzhaupt, Oliver | Journal Article |
| 2017 | Thermische Alterung und Eigenschaften von Polymermaterialien für das Selektive Lasersintern
Schubert, Konrad; Kolb, Johannes; Wohlgemuth, Florian; Lellinger, Dirk; Alig, Ingo | Book Article |
| 2017 | Towards prognostics and health monitoring: The potential of fault detection by piezoresistive silicon stress sensor
Palczynska, A.; Prisacaru, A.; Gromala, P.J.; Han, B.T.; Mayer, D.; Melz, T. | Journal Article, Conference Paper |
| 2017 | Use of magnetic bearings in vibration control of a steam turbine with oil-film bearings
Pilotto, Rafael; Nordmann, Rainer; Atzrodt, Heiko; Herold, Sven | Conference Paper |
| 2017 | Verbundprojekt Systemforschung Elektromobilität
Horch, Felix; Busse, Matthias | Book Article |
| 2017 | Versagensverhalten von Mischschweißverbindungen unter mehrachsiger crashartiger und schwingender Beanspruchung am Beispiel von EMPT-Blechschweißungen. Schlussbericht
Huberth, F.; Baumgartner, J. | Report |
| 2017 | Viscoelastic modelling of gas pore collapse during during polymer sintering
Wohlgemuth, Florian; Alig, Ingo | Conference Paper |
| 2017 | Viscoelastic modelling of gas pore collapse during polymer sintering
Wohlgemuth, F.; Alig, I. | Conference Paper |
| 2017 | Vorrichtung und Verfahren zur Beeinflussung einer dynamischen Eigenschaft wenigstens eines beweglich gelagerten Körpers sowie deren Verwendung als variabel einstellbares Dämpfungselement
Hansmann, Jan; Wolter, Stefan; Seipel, Björn; Kaal, William; Herold, Sven | Patent |
| 2017 | Wie wirksam sind Haftvermittler?
Brüll, Robert | Journal Article |
| 2017 | Witterungsbedingte Lackschäden früher erkennen
Alig, Ingo; Oehler, Harald; Wanner, Matthias | Journal Article |
| 2016 | Ableitung eines vereinfachten Ersatzversuchs für PKW-Integralträger mittels numerischer Schädigungsbewertungen
Landersheim, Volker; Möller, Ricardo; Dittmann, K.-J. | Conference Paper |
| 2016 | Active buckling control of a beam-column with circular cross-section using piezo-elastic supports and integral LQR control
Schäffner, Maximilian; Götz, Benedict; Platz, Roland | Journal Article |
| 2016 | Active buckling control of an imperfect beam-column with circular cross-section using piezo-elastic supports and integral LQR control
Schäffner, Maximilian; Platz, Roland | Conference Paper |
| 2016 | Active load path adaption in a simple kinematic load-bearing structure due to stiffness change in the structure's supports
Gehb, C.M.; Platz, Roland; Melz, Tobias | Conference Paper |
| 2016 | Adaptive piezoelectric absorber for active vibration control
Herold, S.; Mayer, D. | Journal Article |
| 2016 | Additive manufacturing of active struts for piezoelectric shunt damping
Mayer, Dirk; Stoffregen, Hanns Alexander; Heuss, Oliver; Pöllmann, Jennifer; Thiel, Jennifer; Abele, Eberhard; Melz, Tobias | Journal Article, Conference Paper |
| 2016 | Advanced polyimide based composites for improved processing
Meier, C.; Parlevliet, P.P.; Doering, M. | Conference Paper |
| 2016 | Analysis of different fatigue damage accumulation theories and damage parameters based on experiments with the steel HC340LA
Palma, V. de; Tomasella, A.; Frendo, F.; Melz, T.; Sonsino, C.M. | Journal Article |
| 2016 | Anwendung stochastischer Simulationstechniken an smarten Systemen mit reduziertem Simulationsaufwand
Li, Sushan; Ochs, Steffen; Slomski, Elena M.; Melz, Tobias | Conference Paper |
| 2016 | Approach to evaluate and to compare basic structural design concepts of landing gears in early stage of development under uncertainty
Platz, Roland; Götz, Benedict; Melz, Tobias | Conference Paper |
| 2016 | Batterieentwicklung. Kosten sparen mit multiphysikalischen Prüfverfahren
Debes, Christian | Journal Article |
| 2016 | Beitrag zur Bemessung von zyklisch beanspruchten Bauteilen aus Sphärogusswerkstoffen
Schönborn, Steffen; Kaufmann, Heinz; Melz, Tobias; Sonsino, Cetin Morris | Conference Paper |
| 2016 | Beitrag zur Bemessung von zyklisch innendruckbeanspruchten Bauteilen aus Gusseisenwerkstoffen mit Kerbgrundkonzepten
Schönborn, Steffen | Journal Article |
| 2016 | Ein Beitrag zur Beurteilung der Schwingfestigkeit von Großgussbauteilen aus Gusseisen mit Kugelgrafit mit besonderer Berücksichtigung der Auswirkungen von Lunkern auf die Bauteillebensdauer
Bleicher, Christoph | Journal Article |
| 2016 | Ein Beitrag zur Beurteilung der Schwingfestigkeit von Großgussbauteilen aus Gusseisen mit Kugelgraphit mit besonderer Berücksichtigung der Auswirkungen von Lunkern auf die Bauteillebensdauer
Bleicher, Christoph G.H. | Dissertation |
| 2016 | Block copolymers combine the best of both worlds
Klein, R.; Burlon, K. | Journal Article |
| 2016 | Blockcopolymere wagen den Spagat
Klein, Roland; Burlon, Konrad | Journal Article |
| 2016 | Compact electret energy harvester with high power output
Pondrom, P.; Sessler, G.M.; Bös, J.; Melz, Tobias | Journal Article |
| 2016 | Description of transient material behaviour under constant and variable amplitude loading for cold formed steels by linear flow splitting
Tomasella, Alessio | Dissertation |
| 2016 | Detection of energy sinks and sources in the active vibratory energy field of coupled structures and systems with fluid-structure interaction
Groba, Peter; Ebert, J.; Stoewer, Torsten; Schaal, Clarissa; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2016 | Development of a structural health and load monitoring system and its implementation into an aircraft flying demonstrator
Lilov, Mihail; Siebel, Thomas; Contell Asins, Conchin; Schwarzhaupt, Oliver; Carli, Valerio | Conference Paper |
| 2016 | Development of adaptive methods for the reduced noise transmission through a symmetric double-glazed window
Klaus, T.B.; Herold, S.; Heuss, O.; Melz, T. | Journal Article |
| 2016 | Durability simulation with chassis control systems
Brandes, S.; Hilf, K.-D.; Möller, R.; Melz, T. | Journal Article |
| 2016 | Duromere mit dem Laser sprengen
Malz, Frank | Journal Article |
| 2016 | Effect of surface roughness on fatigue performance of additive manufactured Ti–6Al–4V
Greitemeier, D.; Dalle Donne, C.; Syassen, F.; Eufinger, J.; Melz, T. | Journal Article |
| 2016 | Effiziente Validierung stochastischer Sensitivitätsanalysen an smarten Systemen
Ochs, Steffen; Li, Sushan; Slomski, Elena M.; Melz, Tobias | Conference Paper |
| 2016 | Electrical Power-Hardware-In-The-Loop simulation for the early validation of power amplifiers used in Active Vibration Control
Millitzer, Jonathan; Ranisch, Christopher; Kloepfer, Jannes | Conference Paper |
| 2016 | Elektret- und Piezoelektret-Energy-Harvester
Pondrom, Perceval; Hillenbrand, Joachim; Zhang, Xiaoqing; Sessler, Gerd M.; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2016 | Elektroantrieb ohne Reichweitenprobleme: Generatorelektrisches Versuchsfahrzeug
Heim, Rüdiger | Journal Article |
| 2016 | Enhanced lightweight design - first results of the FP7 Project ENLIGHT
Bein, T.; Mayer, D.; Hagebeuker, L.; Bachinger, A.; Bassan, D.; Pluymers, B.; Delogu, M. | Journal Article, Conference Paper |
| 2016 | Enhancement of the fatigue strength assessment of welded components by consideration of mean and residual stresses in the crack initiation and propagation phases
Baumgartner, Jörg | Journal Article |
| 2016 | Entstehung von zwei Wolftönen im Cello und die Möglichkeit zu deren aktiver Minderung
Neubauer, Philipp; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2016 | Estimation of critical conditions of polymers based on monitoring the polymer recovery
Bhati, Sampat Singh; Macko, Tibor; Brüll, Robert | Journal Article |
| 2016 | Evaluation of uncertainty in experimental active buckling control of a slender beam-column with disturbance forces using Weibull analysis
Enß, G.C.; Platz, Roland | Journal Article |
| 2016 | Experimental Studies on Different Actuator-Sensor Configurations of Active Control Systems for the Reduction of Noise and Vibration in Vehicles
Millitzer, J.; Mayer, D.; Kraus, R.; Schmidt, M. | Journal Article |
| 2016 | Faserverbund-Sandwichbauteile für die Großserie
Weidmann, Felix; Graupner, Nico-Benedict; Wieser, Jürgen | Journal Article |
| 2016 | Fatigue life assessment of thin-walled welded joints under non-proportional load-time histories by the shear stress rate integral approach
Bolchoun, Alexandre; Sonsino, Cetin Morris; Kaufmann, Heinz; Melz, Tobias | Journal Article |
| 2016 | Fatigue strength of brazed components considering the influence of brazing quality, mean stresses and loading type
Baumgartner, Jörg; Tillmann, W.; Bobzin, K.; Wojarski, L.; Öte, M.; Manka, M.; Wiesner, S.; Sievers, N. | Conference Paper |
| 2016 | Fitting of the strength hypotheses
Kolupaev, V.A.; Yu, M.-H.; Altenbach, H. | Journal Article |
| 2016 | Flame retardancy of polymers: The role of specific reactions in the condensed phase
Schartel, Bernhard; Perret, Birgit; Dittrich, B.; Ciesielski, Michael; Krämer, J.; Müller, P.; Altstädt, V.; Zang, L.; Döring, Manfred | Journal Article |
| 2016 | Flame retardant epoxy resins and composites
Döring, M. | Conference Paper |
| 2016 | A flame retardant synergism of organic disulfides and phosphorous compounds
Wagner, Jochen; Deglmann, Peter; Fuchs, Sabine; Ciesielski, Michael; Fleckenstein, Christoph A.; Döring, Manfred | Journal Article |
| 2016 | Flame Retardants for Polyethylene
Pfaendner, R. | Book Article |
| 2016 | Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit. Jahresbericht 2015
| Annual Report |
| 2016 | Früherkennung von witterungsbedingten Lackschäden
Alig, Ingo; Hilt, M. | Book Article |
| 2016 | Gas loss of insulating glass units under load
Knorr, M.D.; Wieser, J.; Geertz, G.; Buddenberg, S.; Oechsner, M.; Wittwer, W. | Journal Article |
| 2016 | GaßnerWind - Bemessung von Eisengussbauteilen für Windenergieanlagen unter Berücksichtigung von Betriebsbelastung und Sonderereignissen
Bleicher, Christoph | Journal Article |
| 2016 | Generalized limit surfaces - with an example of hard foams
Fahlbusch, Nina-Carolin; Becker, Wilfried; Kolupaev, Vladimir | Book Article |
| 2016 | Homogenization of elastic properties of short-fiber reinforced composites based on measured microstructure data
Müller, V.; Brylka, B.; Dillenberger, F.; Glockner, R.; Kolling, S.; Böhlke, T. | Journal Article |
| 2016 | Impact of damping factor on the effectiveness of an energy harvesting vibration absorber
Perfetto, S.; Infante, F.; Mayer, D.; Herold, S. | Conference Paper |
| 2016 | In-situ investigation of EMC relaxation behavior using piezoresistive stress sensor
Palczynska, A.; Gromala, P.J.; Mayer, D.; Han, B.; Melz, T. | Journal Article |
| 2016 | Inäquidistante Verzahnung zur Verringerung der Lästigkeit von Zahneingriffsgeräuschen
Neubauer, Philipp; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2016 | Inequidistant gearing used to reduce gear noise
Neubauer, Philipp; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2016 | Influence of membrane type and molecular weight distribution on the degradation of PBI-based HTPEM fuel cells
Ossiander, T.; Perchthaler, M.; Heinzl, C.; Schönberger, F.; Völk, P.; Welsch, M.; Chromik, A.; Hacker, V.; Scheu, C. | Journal Article |
| 2016 | Innovation through the focused interlinking of research and application
Wiedemann, M.; Melz, T. | Abstract |
| 2016 | Investigating the morphological variations due to processing and thermomechanical treatment of poly(propylene) using raman microscopy
Sanoria, A.; Damodaran, S.; Schuster, T.; Brüll, R. | Journal Article |
| 2016 | Konzept zur temperaturabhängigen Lebensdauerabschätzung von Elastomerbauteilen
Kroth, T.; Möller, R.; Melz, T.; Dippel, B.; Lion, A. | Journal Article |
| 2016 | Lateral vibration attenuation of a beam with circular cross-section by a support with integrated piezoelectric transducers shunted to negative capacitances
Götz, Benedict; Schäffner, Maximilian; Platz, Roland; Melz, Tobias | Journal Article |
| 2016 | Leichtbauanforderungen bei Großgusskomponenten
Bleicher, C. | Journal Article |
| 2016 | Lightweight design with welded high-frequency mechanical impact (HFMI) treated high-strength steel joints from S700 under constant and variable amplitude loadings
Yíldírím, H.C.; Marquis, G.; Sonsino, C.M. | Journal Article |
| 2016 | Lightweight-structural durability design by consideration of variable amplitude loading
Sonsino, Cetin Morris; Heim, Rüdiger; Melz, T. | Journal Article |
| 2016 | Lufthärtender duktiler Stahl mit mittlerem Mangangehalt für die Massivumformung
Stieben, Andreas; Bleck, Wolfgang; Schönborn, Steffen | Journal Article |
| 2016 | Makroskopische Anrissüberwachung
Spancken, Dominik; Baumgartner, Jörg | Journal Article |
| 2016 | Maschinenakustik und Psychoakustik: Analyse von Getriebegeräuschen
Bös, Joachim; Moritz, Karsten; Schlittenlacher, Josef; Ellermeier, Wolfgang; Melz, Tobias | Conference Paper |
| 2016 | Measurement of the spatial sound propagation with a low-cost sound intensity scanner
Klaus, T.B.; Schmidt, M.; Herold, S. | Conference Paper |
| 2016 | Methode zur akustischen Gestaltung einer Permanentmagnet-Synchronmaschine auf Basis der Strukturintensität
Adams, Christian; Schaal, Clarissa; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2016 | Methodisches Vorgehen zur Auslegung des vibro-akustischen Verhaltens eines Fahrzeugs
Tamm, Christoph; Thiel, J.; Bartel, Torsten; Atzrodt, Heiko; Herold, Sven | Conference Paper |
| 2016 | Modellbasierte Fehlerdiagnoseverfahren zur Validierung von Simulationsmodellen dynamischer Systeme
Haffke, Björn | Dissertation |
| 2016 | Modelling cumulative effects of dry contact and laminate structure on dynamical behavior of the assembled structures
Sharma, Anuj; Mueller-Hirsch, Wolfgang; Herold, Sven; Melz, Tobias | Journal Article, Conference Paper |
| 2016 | Multi physical domain simulation of a NVH reduction system for a generator-electric vehicle
Tamm, C.; Bartel, T.; Dautfest, A.; Debes, C.; Herold, S.; Dsoki, C. el | Conference Paper |
| 2016 | Multiaxial fatigue of cast aluminium EN AC-42000 T6 (G-AlSi7Mg0.3 T6) for automotive safety components under constant and variable amplitude loading
Sonsino, C.M.; Franz, R. | Journal Article |
| 2016 | Multiaxial loading of thermoplastic laser welds
Spancken, Dominik; Wacker, J.-D.; Büter, Andreas; Melz, Tobias | Journal Article |
| 2016 | New developments in flame-retardant polystyrene foam
Doering, M. | Abstract |
| 2016 | New injection moulding process
Weidmann, F. | Journal Article |
| 2016 | Nonlinear material behaviour and failure of closed-cell polymer foams
Fahlbusch, Nina-Carolin; Becker, Wilfried; Kolupaev, Vladimir; Geertz, Guru | Journal Article |
| 2016 | Nonparametric Quantile Estimation Based on Surrogate Models
Enß, Georg Christoph; Kohler, M.; Krzyzak, A.; Platz, Roland | Journal Article |
| 2016 | Notwendigkeit der intensiven Analyse des bauteilgebundenen Werkstoffverhaltens von Kupfer-Legierungen
Loos, D.; Barti, E.; Wagener, R.; Melz, T. | Journal Article |
| 2016 | Numerische Untersuchungen zur akustischen Wirkung diskreter Strukturänderungen mittels der Strukturintensität
Schaal, Clarissa; Ebert, Johannes; Adams, Christian; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2016 | Optimization of a tuned vibration absorber in a multibody system by operational analysis
Infante, F.; Perfetto, S.; Mayer, D.; Herold, S. | Conference Paper |
| 2016 | Passivation and reactivation of catalyst systems for the single step synthesis of dimethyl ether from CO-rich synthesis gas
Ahmad, R.; Arnold, U.; Deutsch, D.; Döring, M.; Sauer, J. | Journal Article |
| 2016 | Performance and constraints of an active vibration control system with electrodynamic inertial mass actuators
Lapiccirella, Giovanni; Rohlfing, Jens; Mayer, Dirk | Conference Paper |
| 2016 | Phosphorylation of lignin to flame retard acrylonitrile butadiene styrene (ABS)
Prieur, B.; Meub, M.; Wittemann, M.; Klein, Roland; Bellayer, S.; Fontaine, G.; Bourbigot, S. | Journal Article, Conference Paper |
| 2016 | Polymerzusammensetzung mit verzögertem Kristallisationsverhalten, das Kristallisationsverhalten beeinflussende Additivzusammensetzung, Verfahren zur Herabsetzung des Kristallisationspunktes sowie Verwendung einer Additivzusammensetzung
Pfaendner, Rudolf; Groos, Benjamin | Patent |
| 2016 | Polymerzusammensetzung mit verzögertem Kristallisationsverhalten, das Kristallisationsverhalten beeinflussende Additivzusammensetzung, Verfahren zur Herabsetzung des Kristallisationspunktes sowie Verwendung einer Additivzusammensetzung
Groos, Benjamin; Pfaendner, Rudolf | Patent |
| 2016 | Power consumption and performance limit estimation of smart actuators for active vibration control
Lapiccirella, Giovanni; Rohlfing, Jens; Jungblut, Timo | Conference Paper |
| 2016 | Preparation of Ethylene/1-Hexene copolymers from Ethylene using a fully silica-supported tandem catalyst system
Karbach, Fabian F.; Macko, Tibor; Duchateau, Robbert | Journal Article |
| 2016 | Quantification of identical and unique segments in ethylene-propylene copolymers using two dimensional liquid chromatography with infra-red detection
Bhati, Sampat Singh; Macko, Tibor; Brüll, Robert | Journal Article |
| 2016 | A scaling method for vibrating structures using global sensitivity analysis
Adams, Christian; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2016 | Schwingfestigkeitsbeurteilung dickwandiger Komponenten aus Gusseisen mit Kugelgraphit unter besonderer Berücksichtigung der Auswirkungen von Lunkern
Bleicher, Christoph; Wagener, Rainer; Melz, Tobias; Kaufmann, Heinz | Conference Paper |
| 2016 | Schwingfestigkeitsverhalten von Kupfer-Legierungen für die Anwendung in mobilen Steuergeräten
Wagener, R.; Scurria, M.; Kimpel, T.; Haouel, M.; Kaufmann, H.; Melz, T. | Journal Article |
| 2016 | Self-tuning velocity feedback control for a time varying structure using a voltage driven electrodynamic inertial mass actuator
Rohlfing, Jens; May, Thomas; Walter, L.; Millitzer, Jonathan | Conference Paper |
| 2016 | Separation of maleic anhydride grafted polypropylene using multidimensional high-temperature liquid chromatography
Prabhu, K.N.; Macko, T.; Brüll, R.; Remerie, K.; Tacx, J.; Garg, P.; Ginzburg, A. | Journal Article |
| 2016 | Simulation driven design of novel integrated circuits - physics of failure simulation of the electronic control modules for harsh environment application
Palczynska, Alicja; Sasi, Arun; Werner, Matthias; Prisacaru, Alexandru; Gromala, Przemyslaw; Han, Bongtae; Mayer, Dirk; Melz, Tobias | Conference Paper |
| 2016 | Simulationsgestützte Konfiguration von piezoelektrischen Energy-Harvesting-Generatoren für die Versorgung von energieautarken Sensoren im Schienengüterverkehr und anderen Anwendungen
Koch, Michael; Kaal, William; Mayer, Dirk | Conference Paper |
| 2016 | A study of the electric circuit for a vibration energy harvesting absorber
Infante, F.; Perfetto, S.; Herold, S.; Mayer, D. | Conference Paper |
| 2016 | Test rig with active damping control for the simultaneous evaluation of vibration control and energy harvesting via piezoelectric transducers
Perfetto, Sara; Rohlfing, Jens; Infante, Francesco; Mayer, Dirk; Herold, Sven | Conference Paper |
| 2016 | Thermische Alterung und Eigenschaften von Polymermaterialien für das selektive Lasersintern
Schubert, Klaus; Kolb, J.; Wohlgemuth, F.; Lellinger, Dirk; Alig, Ingo | Conference Paper |
| 2016 | Towards prognostics and health monitoring: The potential of fault detection by piezoresistive silicon stress sensor
Palczynska, Alicja; Prisacaru, Alexandru; Gromala, Przemyslaw Jakub; Han, Bongtae; Mayer, Dirk; Melz, Tobias | Conference Paper |
| 2016 | Tuning of a vibration absorber with shunted piezoelectric transducers
Heuss, Oliver; Salloum, R.; Mayer, D.; Melz, Tobias | Journal Article |
| 2016 | Uncertainty quantification for decision making in early design phase for passive and active vibration isolation
Platz, Roland; Melzer, C. | Conference Paper |
| 2016 | Variable amplitude fatigue of high-strength cast iron alloys for automotive applications
Schoenborn, S.; Kaufmann, H.; Sonsino, C.M.; Heim, R. | Journal Article |
| 2016 | Verwendung von phosphorhaltigen organischen Oxyimiden als Flammschutzmittel, Radikalgeneratoren und/oder als Stabilisatoren für Kunststoffe, flammgeschützte Kunststoffzusammensetzung, Verfahren zu deren Herstellung sowie Formteile, Lacke und Beschichtungen
Pfaendner, Rudolf; Mazurowski, Markus | Patent |
| 2016 | Vibration control of a flexible rotor with oil-film bearings by means of active magnetic bearings
Pilotto, R.; Nordmann, R.; Jungblut, T.; Herold, S. | Conference Paper |
| 2016 | Vibration damping of a composite control arm through embedded piezoceramic patches shunted with a negative capacitance
Salloum, Rogerio; Töws, Paul; Schmidt, S.; Mayer, Dirk; Spancken, Dominik; Büter, Andreas | Conference Paper |
| 2016 | Vibrations of Elliptically Shaped Bearings in Strain Wave Gearings
Adams, Christian; Skowronek, Adam; Bös, Joachim; Melz, Tobias | Journal Article |
| 2016 | Viskoelastische Modellierung des Sinterns von Kunststoffmaterialien
Wohlgemuth, F.; Alig, Ingo | Conference Paper |
| 2016 | Von System- zu Materialanforderungen
Nuffer, Jürgen; Rauschenbach, Matthias; Hesseler, Jan; Wagener, Rainer | Journal Article |
| 2016 | Witterungsbedingte Lackschäden früh erkennen
Oehler, Harald | Journal Article |
| 2016 | Zur Bemessung von zyklisch innendruckbeanspruchten Bauteilen aus Gusseisenwerkstoffen mit Kerbgrundkonzepten
Schönborn, Steffen | Dissertation |
| 2016 | Zur Verwendung von durch Spaltprofilieren hergestellten Blechstrukturen als wälzbeanspruchte Oberflächen im Vergleich zum Ausgangszustand
Karin, Ivan | Dissertation |
| 2016 | Zustandsüberwachung mit energieautarken Sensoren am Beispiel der Intralogistik und des Schienengüterverkehrs
Koch, Michael | Conference Paper |
| 2015 | Active elastomer components based on dielectric elastomers
Kaal, W.; Herold, S. | Journal Article |
| 2015 | Active flow control of laminar boundary layers for variable flow conditions
Simon, B.; Nernitz, T.; Rohlfing, J.; Fischer, F.; Mayer, D.; Grundmann, S. | Journal Article |
| 2015 | An adaptive piezoelectric vibration absorber enhanced by a negative capacitance applied to a shell structure
Gripp, J.A.B.; Goes, L.C.S.; Heuss, O.; Scinocca, F. | Journal Article |
| 2015 | Adaptive-passive vibration control systems for industrial applications
Mayer, D.; Pfeiffer, T.; Vrbata, J.; Melz, T. | Conference Paper |
| 2015 | Additive manufacturing of active struts for piezoelectric shunt damping
Mayer, Dirk; Stoffregen, Hanns Alexander; Heuss, Oliver; Pöllmann, Jennifer; Abele, Eberhard; Melz, Tobias | Conference Paper |
| 2015 | Ageing study of different types of long-term pressure tested PE pipes by IR-microscopy
Maria, R.; Rode, Karsten; Schuster, Tobias; Geertz, Guru; Malz, Frank; Sanoria, Abishek; Oehler, Harald; Brüll, Robert; Wenzel, Mirko; Engelsing, Kurt; Bastian, Martin; Brendlé, Emmanuelle | Journal Article |
| 2015 | Aktive Elastomerbauteile auf Basis dielektrischer Elastomere
Kaal, W.; Herold, S. | Journal Article |
| 2015 | Aktive Elastomerbauteile auf Basis Dielektrischer Elastomere
Kaal, William; Herold, Sven | Conference Paper |
| 2015 | Aktive Minderung des Cello-Wolftons durch bedarfsgerechte Geschwindigkeitsrückführung
Neubauer, Philipp; Tschesche, Johannes; Bös, Joachim; Melz, Tobias; Hanselka, Holger | Conference Paper |
| 2015 | Aktive Schwingungsisolation mit dielektrischen Elastomeren
Kaal, William; Bartel, Thorsten; Schuh, Thomas; Herold, Sven | Conference Paper |
| 2015 | Analyse der Strukturintensität in akustisch verbesserten Strukturen
Schaal, Clarissa; Ebert, Johannes; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2015 | An Analytical Model of a Piezoelectric Energy Harvesting Device Integrated with a Rotational Vibration Absorber
Perfetto, Sara; Infante, Francesco; Mayer, Dirk; Herold, Sven | Conference Paper |
| 2015 | Analytical prediction of the effective dynamic behaviour and the damping characteristics of laminated steel stacks as used in electric machines
Schwarzer, M.; Zimmerling, C.; Barti, E.; Dannemann, M.; Bochynek, R.; Bein, T. | Conference Paper |
| 2015 | Antriebssystem für ein Kraftfahrzeug
Melz, Tobias; Heim, Rüdiger; Pfeiffer, Thomas | Patent |
| 2015 | Application of the IForce piezoresistive silicon based stress sensor for prognostic and health monitoring methods
Palczynska, A.; Wu, B.; Kim, D.-S.; Gromala, P.; Han, B.; Mayer, D.; Melz, T. | Conference Paper |
| 2015 | Approach to prevent locking in a spring-damper system by adaptive load redistribution with auxiliary kinematic guidance elements
Gehb, C.M.; Platz, R.; Melz, T. | Conference Paper |
| 2015 | Automobile leicht und sicher
Töws, P.; Büter, A.; Spancken, D. | Journal Article |
| 2015 | Bemessung zyklisch beanspruchter Schweißverbindungen aus höchst- und ultrahochfesten Stählen
Möller, Benjamin; Melz, Tobias; Baumgartner, Jörg; Wagener, Rainer; Kaufmann, Heinz | Journal Article |
| 2015 | Betriebsfeste Bemessung von LCF-beanspruchten MAG-Schweißverbindungen für den Einsatz im Kranbau
Möller, Benjamin; Baumgartner, Jörg; Steege, Hendrik; Wagener, Rainer; Kaufmann, Heinz; Melz, Tobias | Conference Paper |
| 2015 | Characterization of complex phthalic acid/propylene glycol based polyesters by the combination of 2D chromatography and MALDI-TOF mass spectrometry
Pretorius, N.O.; Rhode, K.; Simpson, J.M.; Pasch, H. | Journal Article |
| 2015 | Characterization of sodium carboxymethyl cellulose by comprehensive two-dimensional liquid chromatography
Shakun, Maryia; Heinze, Thomas; Radke, Wolfgang | Journal Article |
| 2015 | Characterization of the chemical composition distribution of ethylene/1-alkene copolymers with HPLC and CRYSTAF-comparison of results
Chitta, Rajesh; Macko, Tibor; Brüll, Robert; Boisson, C.; Cossoul, E.; Boyron, O. | Journal Article |
| 2015 | Characterization of the chemical composition distribution of poly(n-butyl acrylate-stat-acrylic acid)s
Maier, Helena; Malz, Frank; Radke, Wolfgang | Journal Article |
| 2015 | Classical and non-classical failure criteria
Altenbach, Holm; Kolupaev, Vladimir | Book Article |
| 2015 | Cloud point temperature measurements on polyolefins
Arndt, Jan-Hendrik; Macko, Tibor; Brüll, Robert | Journal Article |
| 2015 | Comparison of methodical approaches to describe and evaluate uncertainty in the load-bearing capacity of a truss structure
Melzer, C.M.; Platz, R.; Melz, T. | Conference Paper |
| 2015 | Comparison of uncertainty in passive and active vibration isolation
Platz, R.; Enss, G.C. | Conference Paper |
| 2015 | Conversion of carbon monoxide-rich synthesis gas to hydrocarbons and alcohols over Cu/Co/ZnO/SiO2 catalysts
Schröder, J.; Arnold, U.; Abeln, J.; Sauer, J.; Döring, M. | Journal Article |
| 2015 | Crack initiation and propagation analysis at welds
Baumgartner, Jörg; Waterkotte, R. | Journal Article |
| 2015 | Cumulative damage of high-strength cast iron alloys for automotive applications
Schönborn, Steffen; Kaufmann, Heinz; Sonsino, Cetin Morris; Heim, Rüdiger | Journal Article, Conference Paper |
| 2015 | Dauerfestigkeit II. Vorhaben Nr. 1079
Oechner, M.; Melz, T.; Fomen, G.; Diefenbach, C.; Nejma, R.; Teetz, C. | Report |
| 2015 | Design and test of a piezoelectric inertial mass actuator for active vibration control
Herold, Sven; Mayer, Dirk; Melz, Tobias; Röglin, Tobias | Conference Paper |
| 2015 | Durchgängiges Konzept zur temperaturabhängigen Lebensdaueranalyse von Elastomerbauteilen
Kroth, Thomas | Presentation |
| 2015 | Eco-friendly scratch resistant wood coatings based on silica nanoparticles
Alt, C.; Cordt, C.; Klein, R. | Abstract |
| 2015 | Efficient damping treatment for structure-borne noise reduction in vehicles
Jaber, M.; Schneeweiß, Helmut; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2015 | Einfluss der Klebschichtdicke auf Kopplungsfaktor und Lebensdauer beim Bekleben von piezoelektrischen Flächenwandlern mit Epoxykleber
Widjaja, F.; Janssen, E.; Safi, N. | Journal Article |
| 2015 | An electromechanical impedance-based mobile system for structural health monitoring and reliability check of bonded piezoelectric sensors
Lilov, Mihail; Siebel, Thomas | Conference Paper |
| 2015 | Elution behavior of polypropylene with different tacticity
Macko, Tibor; Arndt, Jan-Hendrik; Brüll, Robert | Journal Article |
| 2015 | Energy harvesting with single-layer and stacked piezoelectret films
Pondrom, Perceval; Hillenbrand, Joachim; Sessler, Gerhard M.; Bös, Joachim; Melz, Tobias | Journal Article |
| 2015 | Enhancement of the local concept of fatigue assessment of welded crane structures made of high-strength steels in the low cycle fatigue regime
Möller, Benjamin; Melz, Tobias; Hrabowski, Jennifer; Herion, Stefan; Ummenhofer, Thomas | Conference Paper |
| 2015 | Entwicklung adaptiver Strukturen am Beispiel einer funktionsintegrierten Lagerung zur aktiven Schwingisolation empfindlicher Geräte
Bartel, Torsten | Dissertation |
| 2015 | Entwicklung eines Verfahrens zur betriebsfesten Bemessung von Einpressverbindungen in Leiterplatten für elektronische Steuergeräte der Fahrzeugtechnik
Kimpel, Thomas | Dissertation |
| 2015 | Entwicklung und Validierung einer Auslegungsmethodik und Modellierungsrichtlinie zur dauerfesten bzw. betriebsfesten Auslegung von hartgelöteten Komponenten der Benzindirekteinspritzung
Melz, Tobias; Tillmann, Wolfgang; Bobzin, Kirsten; Schütt, T.; Baumgartner, Jörg; Sievers, N.; Manka, M.; Matthes, D. | Conference Paper |
| 2015 | Ermüdungsfestigkeit von Gusseisen mit Kugelgraphit bezüglich dickwandiger Anwendungen
Bleicher, C.; Wagener, R.; Kaufmann, H.; Melz, T. | Journal Article |
| 2015 | Fatigue assessment by applying the highly stressed volume approach and complementary mechanical properties
Haberlick, Etienne; Lipp, Klaus | Conference Paper |
| 2015 | Fatigue assessment of joints using the local stress field
Schmidt, Halvar; Baumgartner, Jörg; Melz, Tobias | Journal Article |
| 2015 | Fatigue assessment of welded joints using stress averaging and critical distance approaches
Baumgartner, J.; Schmidt, H.; Ince, E.; Melz, T.; Dilger, K. | Journal Article |
| 2015 | Fatigue design of thermoplastic laser welds
Spancken, Dominik; Decker, Julia; Ruotsalainen, S.; Laakso, P.; Büter, Andreas | Journal Article |
| 2015 | Fatigue Design with Respect to Component Related Cyclic Material Behaviour and Considerations of Size Effects
Hell, M.; Wagener, R.; Kaufmann, H.; Melz, T. | Conference Paper, Journal Article |
| 2015 | Fatigue life and cyclic material behavior of butt-welded high-strength steels in the LCF regime
Möller, Benjamin; Wagener, Rainer; Kaufmann, Heinz; Melz, Tobias | Journal Article |
| 2015 | Fatigue life approach for large components in heavy plant engineering based on rainflow counted local strains
Bisping, J.R.; Bleicher, Christoph; Wagener, Rainer; Melz, Tobias | Journal Article, Conference Paper |
| 2015 | Fatigue life design of components under variable amplitude loading with respect to cyclic material behaviour
Hell, Matthias; Wagener, Rainer; Kaufmann, Heinz; Melz, Tobias | Journal Article, Conference Paper |
| 2015 | Fatigue life of welded high-strength steels under Gaussian loads
Möller, Benjamin; Wagener, Rainer; Hrabowski, Jennifer; Ummenhofer, Thomas; Melz, Tobias | Journal Article, Conference Paper |
| 2015 | Fatigue prediction of additive manufactured Ti-6Al-4V for aerospace: Effect of defects, surface roughness
Greitemeier, D.; Holzinger, V.; Donne, C.D.; Eufinger, J.; Melz, T. | Conference Paper |
| 2015 | Federelement
Laveuve, Dominik; Becker, Paul | Patent |
| 2015 | Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit. Jahresbericht 2014
| Annual Report |
| 2015 | Früherkennung von witterungsbedingten Lackschäden
Oehler, Harald; Alig, Ingo; Bargmann, Maike; Wanner, Matthias; Hilt, Michael | Report |
| 2015 | Functional lignins used as curing agent in fiber-reinforced epoxy-materials
Biesalski, M.; Baaske, M.; Mehlhase, S.; Klein, R.; Valkonen, S.; Duetsch, M. | Abstract |
| 2015 | Funktionsintegrierter Leichtbau mit Warnsystem
Töws, Paul; Spancken, Dominik; Büter, Andreas | Journal Article |
| 2015 | A heterogeneous system architecture for low-power wireless sensor nodes in compute-intensive distributed applications
Engel, A.; Koch, A.; Siebel, T. | Conference Paper |
| 2015 | High-temperature solvent gradient liquid chromatography of model long chain branched polyethylenes
Macko, Tibor; Brüll, Robert; Santonja-Blasco, Laura; Alamo, Rufina G. | Journal Article |
| 2015 | How the autonomic nervous system and driving style change with incremental stressing conditions during simulated driving
Lanatà, Antonio; Valenza, Gaetano; Greco, Alberto; Gentili, Claudio; Bartolozzi, Riccardo; Bucchi, Francesco; Frendo, Francesco; Scilingo, Enzo Pasquale | Journal Article |
| 2015 | Improving the quality of recycled materials
Pfaendner, R. | Journal Article |
| 2015 | In situ compatibilisation of alkenyl-terminated polymer blends using cross metathesis
Descour, C.; Macko, Tibor; Schreur-Piet, I.; Pepels, M.P.F.; Duchateau, R. | Journal Article |
| 2015 | In-situ investigation of EMC relaxation behavior using piezoresistive stress sensor
Palczynska, A.; Gromala, P.J.; Mayer, D.; Bongtae Han; Melz, T. | Conference Paper |
| 2015 | Influence of the transient material behaviour in the fatigue life estimation under random loading
Tomasella, A.; Wagener, R.; Melz, T. | Journal Article, Conference Paper |
| 2015 | Inhibition of peroxide/amine initiated free-radical polymerization of methacrylate resins by oxygen and scavenger
Lellinger, Dirk; Tenzer, Dominik; Alig, Ingo | Conference Paper |
| 2015 | Input energy
Mateu, L.; Kaal, W.; Müller, M.F.; Zimmermann, B.; Würfel, U. | Book Article |
| 2015 | Investigation of Uncertainty Sources of Piezoresistive Silicon Based Stress Sensor
Palczynska, Alicja; Schindler-Saefkow, Florian; Gromala, Przemyslaw; Kreyßig, Kerstin; Rzepka, Sven; Mayer, Dirk; Melz, Tobias | Conference Paper |
| 2015 | Investigation on joint characteristics of laser beam welded press hardenable ultra-high strength steels with ferritic-martensitic and martensitic microstructure
Janzen, V.; Meschut, G.; Dahmen, M.; Poprawe, R.; Lindner, S.; Wagener, Rainer; Melz, Tobias | Journal Article |
| 2015 | Klassifikation von Schnellefeldern flächiger Strukturen zur Erhöhung der ERP-Prognosequalität
Tschesche, Johannes; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2015 | Konstruktion und Herstellung eines Leichtbauquerlenkers aus Kohlenstofffaser
Spancken, Dominik; Töws, Paul; Büter, A. | Journal Article |
| 2015 | Lärm von Kinderspielzeugen
Grebel, Antje; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2015 | Lightweight potential of welded high-strength steel joints from S700 under constant and variable amplitude loading by high-frequency mechanical impact (HFMI) treatment
Yildirim, H.C.; Marquis, G.; Sonsino, C.M. | Journal Article, Conference Paper |
| 2015 | Liquid chromatography at critical conditions of polyethylene
Bhati, Sampat Singh; Macko, Tibor; Brüll, Robert; Mekap, Dibyaranjan | Journal Article |
| 2015 | Measuring the orientation of chains in polypropylene welds by infrared microscopy
Damodaran, Subin; Schuster, Tobias; Rode, Karsten; Sanoria, Abishek; Brüll, Robert; Stöhr, N. | Journal Article |
| 2015 | Mechanical properties of laser beam welded ultra-high strength chromium steel with martensitic microstructure
Dahmen, M.; Janzen, V.; Lindner, S.; Wagener, R. | Journal Article, Conference Paper |
| 2015 | Methoden zur rechnerischen Abschätzung von Temperaturprofilen für Elastomere
Kroth, Thomas; Melz, Tobias | Journal Article |
| 2015 | Modelling of Drive-Train Using a Piezoelectric Energy Harvesting Device Integrated with a Rotational Vibration Absorber
Infante, Francesco; Perfetto, Sara; Mayer, Dirk; Herold, Sven | Conference Paper |
| 2015 | Moderne Flammschutzmittelfür Kunststoffe
Klinkowski, C.; Burk, B.; Bärmann, F.; Döring, M. | Journal Article |
| 2015 | Monitoring crosslinking inhomogeneities in ethylene vinyl acetate photovoltaic encapsulants using Raman microscopy
Sanoria, A.; Ulbricht, D.; Schuster, T.; Brüll, R. | Journal Article |
| 2015 | Monitoring the effect of chlorine on the ageing of polypropylene pipes by infrared microscopy
Schuster, Tobias; Damodaran, Subin; Rode, Karsten; Abhishek, Sanoria; Brüll, Robert; Wenzel, Mirko; Bastian, Martin | Journal Article |
| 2015 | Monolayer deposition of bisphenol a polycarbonate oligomers on Au(111)
Gustus, R.; Wegewitz, L.; Sedelmeier, Sascha; Hofft, O.; Wieser, Jürgen; Rehahn, Matthias; Endres, F.; Maus-Friedrichs, W. | Journal Article |
| 2015 | More silence on deck
Tamm, Christoph | Journal Article |
| 2015 | Multiaxial random fatigue of magnesium laserbeam-welded joints - experimental results and numerical fatigue life evaluation
Bolchoun, A.; Sonsino, Cetin Morris; Kaufmann, Heinz; Melz, Tobias | Journal Article, Conference Paper |
| 2015 | New bainitic steel for cyclic loaded safety parts with improved cyclic material behaviour
Elek, L.; Wagener, R.; Kaufmann, H.; Wirths, V.; Melz, T. | Journal Article, Conference Paper |
| 2015 | Nodular cast iron for normal and arctic temperatures in wind energy
Bleicher, C.; Wagener, R.; Kaufmann, H.; Melz, T. | Conference Paper |
| 2015 | Novel phosphorus-containing flame retardants for engineering plastics
Döring, M. | Conference Paper |
| 2015 | Numerical investigation of the sound power and of the structural intensity of a permanent magnet synchronus machine
Adams, Christian; Schaal, Clarissa; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2015 | Numerical measures of the degree of non-proportionality of multiaxial fatigue loadings
Bolchoun, A.; Kaufmann, H.; Sonsino, C.M. | Journal Article |
| 2015 | Numerical modeling of a smart structure with regard to sensitivity analysis of the system
Li, Sushan; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2015 | Opportunities and Limitations of Structural Intensity Calculation regarding Uncertainties in the NVH design of Complex Vehicle Body Structures
Stoewer, Torsten; Ebert, Johannes; Melz, Tobias | Conference Paper |
| 2015 | Opportunities and limitations on vibro-acoustic design of vehicle structures by means of energy flow-based numerical simulation
Ebert, Jonas; Stoewer, Torsten; Schaal, Clarissa; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2015 | Optimally tuned resonant negative capacitance for piezoelectric shunt damping based on measured electromechanical impedance
Salloum, R.; Heuss, O.; Götz, B.; Mayer, D. | Conference Paper |
| 2015 | Orthonormal filters for identification in active control systems
Mayer, D. | Journal Article |
| 2015 | Parametric modeling of main excitation sources on board vessels
Tamm, C.; Stoll, G.; Herold, S. | Conference Paper |
| 2015 | Piezoelectric bimorph beams consolidate vibration control functions
Bartel, T. | Journal Article |
| 2015 | Piezoelectric transducers
Brunner, Bernhard; Kurch, Matthias; Kaal, William | Book Article |
| 2015 | Probabilistic extension of failure net based FMEA
Kaiser, Bernhard; Rauschenbach, Matthias | Conference Paper |
| 2015 | Probabilistische Systemfehler- und Zuverlässigkeitsanalyse auf Basis von FMEA und hierarchischen Bayes-Netzwerken
Rauschenbach, Matthias; Nuffer, Jürgen; Mayer, Dirk | Conference Paper |
| 2015 | Qualität von Rezyklaten verbessern
Pfaendner, Rudolf | Journal Article |
| 2015 | Raman spectroscopy as a non-destructive tool to quantify the comonomer content in ethylene/1-olefin copolymers
Sanoria, A.; Schuster, T.; Brüll, R. | Journal Article |
| 2015 | Recent advances in active noise and vibration control
Bein, T.; Herold, S.; Mayer, D. | Conference Paper |
| 2015 | Reliable designs in foam
Kolupaev, Vladimir; Becker, Wilfried; Massow, Holger; Kiegelmann, Eddy M. | Journal Article |
| 2015 | Replacement of conventional elastomers
Klein, R.; Matecki, M. | Journal Article |
| 2015 | Scanning acoustic microscopy for detection of weathering induced defects in coatings
Alig, Ingo; Oehler, Harald; Bargmann, Maike; Lellinger, Dirk | Conference Paper |
| 2015 | Schadenstolerant: Konstruktion und Herstellung eines Leichtbauquerlenkers aus Kohlenstofffaser
Spancken, Dominik; Töws, Paul; Büter, Andreas | Journal Article |
| 2015 | Schallabstrahlung eines Permanentmagnet-Synchronmotors bei unterschiedlichen Betriebszuständen
Adams, Christian; Schaal, Clarissa; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2015 | Schaumstoffe im Kundtschen Rohr - Modelle und Einflussparameter
Grebel, Antje; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2015 | Schwingungsbasiertes Energy Harvesting auf Elektret- und Piezoelektretbasis
Pondrom, Perceval; Hillenbrand, Joachim; Sessler, Gerd M.; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2015 | Separation of bimodal high density polyethylene using multidimensional high temperature liquid chromatography
Prabhu, K.N.; Brüll, Robert; Macko, Tibor; Remerie, Klaas; Tacx, J.; Garg, P.; Ginzburg, Anton | Journal Article |
| 2015 | Significance of the superposition of cyclic mechanical and corrosive loadings in the qualification process of aluminium alloys
Bauer-Troßmann, Kathrin; Yu, Liuhao; Melz, Tobias; Oechsner, Michael; Kaufmann, H. | Journal Article |
| 2015 | A simple procedure for estimating SN-lines for crack initiation from SN-lines for total failure
Sonsino, C.M. | Journal Article |
| 2015 | Special issue "Structural durability". Preface
Baumgartner, Jörg | Journal Article |
| 2015 | Standards for dielectric elastomer transducers
Carpi, F.; Anderson, I.; Bauer, S.; Frediani, G.; Gallone, G.; Gei, M.; Graaf, C.; Jean-Mistral, C.; Kaal, W.; Kofod, G.; Kollosche, M.; Kornbluh, R.; Lassen, B.; Matysek, M.; Michel, S.; Nowak, S.; O'Brien, B.; Pei, Q.B.; Pelrine, R.; Rechenbach, B.; Rosset, S.; Shea, H. | Journal Article |
| 2015 | Substitution metallischer Strukturen durch faserverstärkte Komposite. Optimierte Herstellung
Hirtz, E.-M.; Markus, C.; Lehmann, M. | Journal Article |
| 2015 | Systemzuverlässigkeit von Hochvolt-Batterien für Elektrostraßenfahrzeuge
Heim, Rüdiger; Dautfest, Alexander; Flaschenträger, David; Dsoki, Chalid el | Journal Article |
| 2015 | Toward halogen-free flame resistant polyethylene extrusion coated paper facings
Pawelec, Weronica; Tirri, Teija; Aubert, Melanie; Haggblom, E.; Lehikoinen, T.; Skatar, R.; Pfaendner, Rudolf; Wilén, Carl-Eric | Journal Article |
| 2015 | Uncertainty of additive manufactured Ti-6Al-4V: Chemical composition, microstructure and mechanical properties
Greitemeier, Daniel; Dalle Donne, Claudio; Schoberth, Achim; Jürgens, Michael; Eufinger, Jens; Melz, Tobias | Conference Paper |
| 2015 | Validation of simulation models without knowledge of parameters using differential algebra
Haffke, Björn; Möller, Ricardo; Melz, Tobias; Strackeljan, Jens | Journal Article |
| 2015 | A versatile tool. Block copolymers improve adhesion properties of plastics
Klein, Roland | Journal Article |
| 2015 | Wahrnehmung von Getriebegeräuschen - Übertragung psychoakustischer Analysen auf Körperschallsignale
Moritz, Karsten; Ochs, Steffen; Schlittenlacher, Josef; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2015 | Why variable amplitude loading? A key for lightweight-structural durability design
Sonsino, Cetin Morris; Heim, Rüdiger; Melz, Tobias | Conference Paper |
| 2014 | (Photo)oxidative stabilization of flame-retarded polymers
Pfaendner, R. | Book Article |
| 2014 | 2D-tension loading on hard foams and ceramics
Kolupaev, Vladimir; Becker, W.; Massow, H.; Kiegelmann, E.M. | Abstract |
| 2014 | 4th Symposium on Structural Durability, SoSDiD 2014. Proceedings
: Baumgartner, J. | Conference Proceedings |
| 2014 | Abschnitt O3 "Maschinenakustik"
Hanselka, Holger; Bös, Joachim | Book Article |
| 2014 | Acquisition unit for in-situ stress measurements in smart electronic systems
Palczynska, A.; Pesth, F.; Gromala, P.J.; Melz, T.; Mayer, D. | Conference Paper |
| 2014 | Active stabilization of a slender beam-column under static axial loading and estimated uncertainty in actuator properties
Platz, Roland; Enß, Georg Christoph; Ondoua, Serge; Melz, Tobias | Conference Paper |
| 2014 | Adaptive resonant piezoelectric shunt damping enhanced by a synthetic negative capacitance
Gripp, J.A.B.; Heuss, O.; Góes, L.C.S.; Melz, T. | Conference Paper |
| 2014 | Additive - der Schlüssel für Kunststoff-Innovationen
Pfaendner, R. | Journal Article |
| 2014 | Advanced Design Projects an der TU Darmstadt - studentische Projektarbeiten in Kooperation mit der Industrie
Bös, Joachim; Melz, Tobias | Conference Paper |
| 2014 | Aktive akustische Maskierung an einem Büro-Container
Bös, Joachim; Melz, Tobias; Thyes, Christian; Tschesche, Johannes | Conference Paper |
| 2014 | Aktive Lagerung empfindlicher Analysegeräte
Bartel, T.; Gaisbauer, Samuel; Herold, S.; Melz, T. | Journal Article |
| 2014 | Analysis of complex phthalic acid based polyesters by the combination of size exclusion chromatography and matrix-assisted laser desorption/ionization mass spectrometry
Pretorius, N.O.; Rode, Karsten; Simpson, J.M.; Pasch, H. | Journal Article |
| 2014 | Anisotropy of paper and paper based composites and the modelling thereof
Kröling, H.; Endres, A.; Nubbo, N.; Fleckenstein, J.; Miletzky, A.; Schabel, S. | Conference Paper |
| 2014 | Application of stress-based multiaxial fatigue criteria for laserbeam-welded thin aluminium joints under proportional and non-proportional variable amplitude loadings
Bolchoun, A.; Wiebesiek, Jens; Kaufmann, Heinz; Sonsino, Cetin Morris | Journal Article |
| 2014 | Applications of aluminium hybrid foam sandwiches in battery housings for electric vehicles
Baumeister, Joachim; Weise, J.; Hirtz, Eva-Maria; Höhne, Klaus; Hohe, J. | Journal Article |
| 2014 | Applications of aluminum hybrid foam sandwiches in battery housings for electric vehicles
Baumeister, J.; Weise, J.; Hirtz, E.; Höhne, K.; Hohe, J. | Conference Paper, Journal Article |
| 2014 | An approach for the fatigue estimation of porous cast iron based on non-destructive testing results
Heinrietz, A.; Hesseler, J. | Conference Paper |
| 2014 | Approach to evaluate uncertainty in passive and active vibration reduction
Platz, R.; Ondoua, S.; Enss, G.C.; Melz, T. | Conference Paper |
| 2014 | Auslegung von Probekörpern aus Hartschaum zur Ermittlung der biaxialen Zugfestigkeit
Kolupaev, Vladimir; Becker, Wilfried; Massow, Holger; Dierkes, Dominik | Journal Article |
| 2014 | Auslegung, Konstruktion und Erprobung eines CFK-Panels mit SHM in der Luftfahrt
Lehmann, Martin; Büter, A. | Journal Article |
| 2014 | Auslegungs- und Absicherungsprozess im Fokus der Elektromobilität - Herausforderungen der Betriebsfestigkeit
Hirtz, Eva-Maria; Käsgen, Johannes; Krause, Ivo; Pleteit, H.; Eckardt, B.; Möller, R. | Conference Paper |
| 2014 | Auslegungs- und Absicherungsprozess im Fokus der Elektromobilität – Herausforderungen der Betriebsfestigkeit
Hirtz, E.-M.; Käsgen, J.; Krause, I.; Pleteit, Hermann; Eckardt, B.; Möller, R. | Conference Paper |
| 2014 | An Automated Process for Numerical Evaluation of Cable Stiffnesses
Stoll, Georg; Pöllmann, Jennifer; Atzrodt, Heiko | Journal Article |
| 2014 | Autonomes Netzwerk zur Überwachung der Tragstrukturen von Windenergieanlagen
Friedmann, Andreas; Dornbusch, Thomas; Strobel, W.; Koch, Michael | Conference Paper |
| 2014 | Bainitic forging steels for cyclic loading
Wirths, Vera; Wagener, Rainer; Bleck, Wolfgang; Melz, Tobias | Conference Paper |
| 2014 | Bauteil mit Filamentanschluss und Verfahren zur Herstellung eines Bauteils mit Filamentanschluss
| Patent |
| 2014 | Ein Beitrag zur Lebensdauerberechnung von gegossenen Aluminiumwerkstoffen unter Berücksichtigung von prozessbedingten Porositäten
Heinrietz, Andre | Dissertation |
| 2014 | Benefits of radical generators in flame retarded polymers: Review and new developments
Pfaendner, R. | Abstract |
| 2014 | Bridged phosphorylated diamines: Synthesis, thermal stability and flame retarding properties in epoxy resins
Klinkowski, Cristoph; Wagener, Sebastian; Ciesielski, Michael; Döring, Manfred | Journal Article, Conference Paper |
| 2014 | Calculated and measured effects of bearings faults in elliptically deformed ball bearings
Bös, Joachim; Melz, Tobias; Skowronek, Adam; Moritz, Karsten | Conference Paper |
| 2014 | Compact polymeric 3D prints of high stability
Hellmann, G.P.; Kottlorz, C.; Presser, J.; Utaloff, K. | Journal Article |
| 2014 | Concept development and implementation of new hybrid compounds
Nubbo, N.; Felde, A.; Heinrich, M.; Decker, J.; Büter, A.; Fütterer, M.; Iosub, A. | Conference Paper |
| 2014 | Crystallization of poly(epsilon-caprolactone)/MWCNT composites: A combined SAXS/WAXS, electrical and thermal conductivity study
Wurm, Andreas; Lellinger, Dirk; Minakov, Alexander; Skipa, Tetyana; Pötschke, Petra; Nicula, Radu; Alig, Ingo; Schick, Cristoph | Journal Article |
| 2014 | Cyclic material behaviour of welded ultra high-strength steels
Möller, Benjamin; Wagener, Rainer; Melz, Tobias | Conference Paper |
| 2014 | Data acquisition network for SHM in wind turbines towers - the project ANÜBeS
Friedmann, A. | Conference Paper |
| 2014 | Definition of simulated driving tests for the evaluation of drivers' reactions and responses
Bartolozzi, R.; Frendo, F. | Journal Article |
| 2014 | Design and utilization of nitrogen containing flame retardants based on N-Alkoxyamines, Azoalkanes and related compounds
Wilén, C.-E.; Pfaendner, R. | Book Article |
| 2014 | Design approach for an active double-glazed window
Heuss, O.; Kaal, W.; Klaus, T.B.; Thyes, C.; Tschesche, J.; Karsten, R. | Conference Paper |
| 2014 | Design of smart lightweight structures: Simultaneous optimization of mechanical and shunt circuit parameters
Salloum, R.; Heuss, Oliver; Mayer, D. | Conference Paper |
| 2014 | Designed flame retardancy with phosphorus polymers
Pospiech, D.; Fischer, O.; Korwitz, A.; Hoffmann, T.; Ciesielski, M.; Döring, M.; Köppl, T.; Altstädt, V.; Brehme, S.; Vollmerhausen, D.; Schartel, B. | Abstract |
| 2014 | Development of a hardware-in-the-loop test facility for signal processing units with adaptive control algorithms for an automotive application
Vrbata, J.; Millitzer, Jonathan; Mayer, D.; Röglin, T.; Bartel, Torsten | Conference Paper |
| 2014 | Development of a magnetorheological damper with an in two ways adjustable magnetic field for an electrically powered car with wheel hub motors
Jackel, Marco; Hansmann, J.; Matthias, Michael; Melz, T. | Conference Paper |
| 2014 | Development of active engine mounts based on piezo actuators
Kraus, Roman; Herold, Sven; Millitzer, Jonathan; Jungblut, Timo | Journal Article |
| 2014 | Development of functionally integrated mounts for three- and six-axial vibration isolation of sensitive equipment
Bartel, T.; Gaisbauer, Samuel; Stöhr, P.; Herold, S.; Melz, T. | Conference Paper |
| 2014 | Development, simulation and measurement of functionally integrated piezoelectric mount
Tarle, Polya; Bartel, Thorsten; Gaisbauer, Samuel | Conference Paper |
| 2014 | Dielektrische Elastomer-Stapelaktoren mit gelochten Elektroden für strukturdynamische Anwendungen
Kaal, William | Dissertation |
| 2014 | Disulfides - effective radical generators for flame retardancy of polypropylene
Pawelec, W.; Holappa, A.; Tirri, T.; Aubert, M.; Hoppe, H.; Pfaendner, R.; Wilén, C.-E. | Journal Article |
| 2014 | Dual use of velocity feedback control units for active vibration control and structural health monitoring
Rohlfing, J.; Mayer, D. | Conference Paper |
| 2014 | Eco-friendly fire prevention
Pfaender, Rudolf; Döring, Manfred | Journal Article |
| 2014 | Economic efficiency and applications
Nubbo, N.; Fleckenstein, J.; Büter, A.; Kröling, H. | Journal Article |
| 2014 | Effect of uncertain boundary conditions and uncertain axial loading on lateral vibration attenuation of a beam with shunted piezoelectric transducers
Götz, Benedict; Platz, Roland; Melz, T. | Conference Paper |
| 2014 | Effects of residual stresses on the fatigue performance of welded steels with longitudinal stiffeners
Hensel, J.; Nitschke-Pagel, T.; Dilger, K.; Schönborn, S. | Conference Paper |
| 2014 | Efficient simulation of the active vibratory energy flow of structures in a given frequency band
Ebert, J.; Stoewer, T.; Schaal, Clarissa; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2014 | Electromechanical impedance for local integrity assessment
Siebel, T.; Lilov, M.; Metzner, D. | Conference Paper |
| 2014 | EMILIA - A compact impedance analyzer for local integrity assessment
Lilov, M.; Siebel, T. | Conference Paper |
| 2014 | Energiegewinnung aus Schwingungen mit Piezokeramiken und Elektroaktiven Polymeren
Kaal, William; Koch, Thorsten; Herold, S.; Melz, T. | Conference Paper |
| 2014 | Entwicklung aktiver Motorlagerungen auf Basis von Piezoaktoren
Kraus, Roman; Herold, Sven; Millitzer, Jonathan; Jungblut, Timo | Journal Article |
| 2014 | Entwicklung einer Bemessungsmethode für Mahlanlagen in der Zementindustrie am Beispiel von Vertikalrollenmühlen
Bisping, Justin Robert | Dissertation |
| 2014 | EPES: Effiziente Prognose vibroakustischer Eigenschaften in der Schiffsentwurfsphase
Lippert, Stephan; Stritzelberger, Bernd; Estorff, Otto von; Seiler, Robin; Mathowetz, Sebastian; Holbach, Gerd; Groß, Julia; Bös, Joachim; Karger, Marius; Zaleski, Olgierd; Tamm, Christoph; Krüger, Anne; Eberling, Bastian; Bech, Insa; Sichermann, Wolfgang; Reichstein, Nils; Urban, Bernhard | Conference Paper |
| 2014 | Experimental analysis of the ratcheting behavior of linear flow split flanges of HC340LA
Palma, Valerio de; Tomasella, Alessio; Frendo, Francesco; Sonsino, Cetin Morris; Melz, Tobias | Journal Article |
| 2014 | Experimental study on active noise and active vibration control for a passenger car using novel piezoelectric engine mounts and electrodynamic inertial mass actuators
Kraus, Roman; Millitzer, Jonathan; Hansmann, J.; Wolter, Stefan; Jackel, Marco | Conference Paper |
| 2014 | Failure behavior of closed-cell polymer foams - the necessity of advanced failure prediction
Fahlbusch, N.-C.; Becker, W.; Kolupaev, Vladimir | Conference Paper |
| 2014 | Failure of Hard Foams under Multiaxial Loading
Kolupaev, Vladimir; Becker, W.; Massow, H. | Conference Paper |
| 2014 | Fatigue and structural durability of automotive components
Bruder, Thomas; Hanselka, Holger; Heim, Rüdiger; Kaufmann, Heinz; Kieninger, Michael; Nuffer, Jürgen; Sonsino, Cetin Morris; Kieninger, Michael et al. | Book Article |
| 2014 | Fatigue design of short fibre reinforced polymers
Spancken, D.; Decker, J.; Becker, P.; Contell Asins, C.; Büter, A. | Conference Paper |
| 2014 | Fatigue life assessment for large components based on rainflow counted local strains using the damage domain
Bisping, J.R.; Peterwerth, B.; Bleicher, C.; Wagener, R.; Melz, T. | Journal Article |
| 2014 | FDTD simulation of the acoustic interaction between a cavity and an adaptive Helmholtz resonator
Klaus, Tim Bastian; Heuss, Oliver; Thyes, Christian; Hanselka, Holger | Journal Article |
| 2014 | Feasibility study of an energy harvesting system integrated with a rotational vibration absorber
Perfetto, S.; Infante, F.; Atzrodt, H.; Mayer, D.; Herold, S. | Conference Paper |
| 2014 | Flame-made Cu/ZnO/Al2O3 catalyst for dimethyl ether production
Ahmad, Ruaa; Hellinger, Melanie; Buchholz, Maria; Sezen, Hikmet; Gharnati, Loubna; Wöll, Christof; Sauer, Jörg; Döring, Manfred; Grunwaldt, J.-D.; Arnold, U. | Journal Article |
| 2014 | Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit. Jahresbericht 2013
| Annual Report |
| 2014 | Global optimization of smart lightweight structures
Salloum, R.; Heuss, O.; Mayer, D. | Conference Paper |
| 2014 | The Green City Car. A holistic approach for NVH abatement of city cars
Bein, Thilo; Mayer, Dirk; Elliott, Steve; Ferrali, Leonardo; Casella, Mauro; Saemann, Ernst-Ulrich; Kropp, Wolfgang; Nielsen, Finn Kryger; Meschke, Jens; Pisano, Emanuel | Conference Paper |
| 2014 | Hardware-accelerated wireless sensor network for distributed structural health monitoring
Engel, A.; Friedmann, Andreas; Koch, Thorsten; Rohlfing, Jens; Siebel, Thomas; Mayer, Dirk | Conference Paper |
| 2014 | Helmholtz-Resonatoren für Doppelglasfenster
Klaus, Tim Bastian | Journal Article |
| 2014 | Höheres Leichtbau- und Einsatzpotenzial praxisrelevanter Schmiedewerkstoffe
Kaufmann, Heinz; Küppers, M. | Journal Article |
| 2014 | Identifizierung signifikanter STI-basierter Skalare hinsichtlich einer verminderten Schallabstrahlung
Bös, Joachim; Melz, Tobias; Schaal, Clarissa | Conference Paper |
| 2014 | Implementation of an equivalent linear contact model to study the dynamical characteristics of assembled structures with different contact pairs
Sharma, A.; Mueller-Hirsch, W.; Herold, S.; Melz, T. | Conference Paper |
| 2014 | Influence of load signal form and variable amplitude loading on the corrosion fatigue behaviour of aluminium alloys
Bauer-Troßmann, Kathrin; Yu, Liuhao; Melz, Tobias; Oechsner, Matthias; Kaufmann, Heinz | Conference Paper |
| 2014 | Influence of uncertain support boundary conditions on the buckling load of an axially loaded beam-column
Schäffner, Maximilian; Enß, Georg Christoph; Platz, R. | Conference Paper |
| 2014 | Influence of varying active support stiffness on the load path in a 2D-truss for structural health control
Gehb, Christopher; Platz, Roland; Melz, Tobias | Conference Paper |
| 2014 | Integrated solutions for noise and vibration control in vehicles
Mayer, Dirk; Millitzer, Jonathan; Bein, Thilo | Journal Article |
| 2014 | Investigation of the operational vibration characteristics of a freight car to design energy harvesting sensors
Koch, M.; Kaal, W. | Conference Paper |
| 2014 | Investigations about the influences of temperature and oil on the fatigue behavior of short fiber reinforced polyamide 6.6
Decker, J.; Brüll, R.; Schuster, T.; Oehler, H.; Alig, I.; Richstein, B.; Büter, A. | Conference Paper |
| 2014 | Das LOEWE-Zentrum AdRIA - eine Übersicht über die Projektergebnisse
Bös, Joachim; Melz, Tobias; Bein, Thilo | Conference Paper |
| 2014 | LOEWE-Zentrum AdRIA: Latest results of an interdisciplinary research project on active vibration and noise control
Bös, Joachim; Bein, Thilo; Hanselka, Holger | Conference Paper |
| 2014 | Loudspeaker array for the directional generation of acoustic warning signals of electric vehicles
Bös, Joachim; Melz, Tobias; Pondrom, P; Tschesche, Johannes | Conference Paper |
| 2014 | Machine acoustics at TU Darmstadt - history, present topics, and future developments
Bös, Joachim; Storm, Rainer; Hanselka, Holger | Conference Paper |
| 2014 | Materialeigenschaften: Eine Frage der Sicherheit
Glöckner, Robert; Spancken, Dominik | Journal Article |
| 2014 | Mathematical modeling and numerical simulation of an actively stabilized beam-column with circular cross-section
Schäffner, Maximilian; Enß, Georg Christoph; Platz, R. | Conference Paper |
| 2014 | Measurement of the damping properties of carbon composite plates by the power input method
Jaber, M.; Schneeweiss, H.; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2014 | Minimum Circumscribed Ellipse (MCE) and Stress Scale Factor (SSF) criteria for multiaxial fatigue life assessment
Anes, V.; Reis, L.; Li, B.; Freitas, M.; Sonsino, C.M. | Journal Article |
| 2014 | Model order reduction of dynamical structural simulation models of electric motors using Krylov subspaces
Schwarzer, M.; Barti, E.; Bein, T. | Conference Paper |
| 2014 | Multi-axial tests on hard foams
Kolupaev, Vladimir; Fahlbusch, Nina-Carolin; Massow, Holger; Becker, Wilfried | Conference Paper |
| 2014 | Multiaxial fatigue evaluation of laserbeam-welded magnesium joints according to IIW-fatigue design recommendations
Exel, Nora; Sonsino, Cetin Morris | Journal Article |
| 2014 | Multilayer dielectric elastomer stack actuators
Wagner, J.; Krause, J.; Clauberg, K.; Feller, T.; Orselli, E.; Schilling, C.; Lellinger, Dirk; Alig, I.; Uhl, D.; Böse, R.; Rabindranath, R.; Kretschmer, H.-R.; Theile, P.; Lotz, P.; Grotepaß, T.; Haus, H.; Mößinger, H.; Schlaak, H.F. | Conference Paper |
| 2014 | Multiple-injection method in high-temperature two-dimensional liquid chromatography (2D HT-LC)
Mekap, D.; Macko, T.; Brüll, R.; Cong, R.; Groot, W. de; Parrott, A.; Yau, W. | Journal Article |
| 2014 | New generation of forging steels for cyclic loaded safety components with improved fatigue properties
Elek, L.; Fischer, C.; Melz, T.; Wagener, R.; Wirths, V.; Bleck, W. | Report |
| 2014 | Non-homogenous localized Kelvin-Voigt model for estimation of dynamical behaviour of structures with bolted joints
Sharma, A.; Mueller-Hirsch, W.; Herold, S.; Melz, T. | Conference Paper |
| 2014 | Nonparametric estimation of a maximum of quantiles
Enss, G.C.; Götz, B.; Kohler, M.; Krzyzak, A.; Platz, Roland | Journal Article |
| 2014 | Numerical and experimental evaluation of signal statistics for structural health monitoring
Becht, P.; Friedmann, A. | Conference Paper |
| 2014 | Numerical and experimental investigation of parameter uncertainty in the working diagram and in use of a single piezoelectric stack actuator to stabilize a slender beam column against buckling
Ondoua, Serge; Platz, R. | Conference Paper |
| 2014 | NVH development of car structures by means of numerical simulation of energetic quantities
Ebert, Jonas; Stoewer, Torsten; Schaal, Clarissa; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2014 | Operationally reliable dimensioning of major plants for the cement industry
Bisping, J.R.; Wagener, Rainer; Melz, Tobias | Journal Article |
| 2014 | Optimization and realization of distributed vibration absorbers
Herold, Sven; Mayer, Dirk; Pöllmann, Jennifer; Schäfer, Christiane; Stein, G.L. | Conference Paper |
| 2014 | Phenomenological yield and failure criteria
Altenbach, Holm; Bolchoun, Alexandre; Kolupaev, Vladimir A. | Book Article |
| 2014 | Phosphorus containing flame retardants in epoxy resins. Efficiency and influence on material parameters
Schmidt, C.M.; Utaloff, K.; Döring, M. | Conference Paper |
| 2014 | Phosphorus flame retardants with different chemical environment. Thermal stability and flame-retardant efficiency
Döring, M.; Burk, B.; Ciesielski, M. | Abstract |
| 2014 | Piezo based testing facilities to discover new areas in material characterisation
Fischer, C.; Wagener, R.; Melz, T.; Kaufmann, H. | Report |
| 2014 | Planung und Durchführung einer Sensitivitätsanalyse am Kundtschen Rohr
Bös, Joachim; Melz, Tobias; Grebel, Anja; Ochs, Steffen | Conference Paper |
| 2014 | Plastification of polymers in twin-screw-extruders: New visualization technic using high-speed imaging
Knieper, A.; Beinert, C. | Conference Paper |
| 2014 | Polymer separations by liquid interaction chromatography: Principles - prospects - limitations
Radke, W. | Journal Article |
| 2014 | Polymerzusammensetzung mit verbesserter Langzeitstabilität, hieraus hergestellte Formteile sowie Verwendungszwecke
Pfaendner, Rudolf; Metzsch-Zilligen, Elke | Patent |
| 2014 | Preparation and characterization of Bis-[1,3,5]triazinyl diazenes and their utilization as flame retardants in polypropylene films
Tirri, T.; Aubert, M.; Pawelec, W.; Wilen, C.E.; Pfaendner, R.; Hoppe, H.; Roth, M.; Sinkkonen, J. | Journal Article |
| 2014 | Printed load monitoring sensors for structural health assessment
Wirth, Ingo; Haydn, Katharina; Zoellmer, Volker; Mayer, Dirk | Conference Paper |
| 2014 | Prüfsystem zur dynamischen und/oder zyklischen Belastungsprüfung einer Probe
Melz, Tobias; Matthias, Michael; Hanselka, Holger | Patent |
| 2014 | Psychoacustic characterization of the noise produced by photovoltaic inverters
Ellermeier, Wolfgang; Kattner, Florian; Kurtze, Lothar; Bös, Joachim | Journal Article |
| 2014 | Quantification of highly oriented nucleating agent in PP-R by IR-microscopy, polarised light microscopy, differential scanning calorimetry and nuclear magnetic resonance spectroscopy
Schuster, Tobias; Damodaran, Subin; Rode, Karsten; Malz, Frank; Brüll, Robert; Gerrets, Britta; Wenzel, Mirko; Bastian, Martin | Journal Article |
| 2014 | Reduktion von Testdauer und Stichprobenumfang, ein Widerspruch?
Flaschenträger, D. | Presentation |
| 2014 | Reinforcements: Non-woven and paper based epoxy composites
Kröling, H.; Fleckenstein, J.; Nubbo, N.; Endres, A.; Miletzky, F.; Schabel, S. | Journal Article |
| 2014 | Reliability assessment of mechatronic devices in vehicles
Bertsche, B.; Gäng, J.; Hanselka, Holger; Han, Soong-Oh; Nuffer, Jürgen; Wolf, Kai | Book Article |
| 2014 | Residual stresses and fatigue behavior of high strength structural steels with fillet welded longitudinal stiffeners
Hensel, J.; Nitschke-Pagel, T.; Dilger, K.; Schoenborn, S. | Journal Article |
| 2014 | Schwingfestigkeit von Schweißverbindungen unter Berücksichtigung von Schweißeigenspannungen und Größeneinflüssen
Baumgartner, Jörg | Dissertation |
| 2014 | Schwingfestigkeitsanalyse struktureller Klebverbindungen unter Belastung mit variablen Amplituden
Schmidt, Halvar | Dissertation |
| 2014 | Significance of the superposition of cyclic mechanical and corrosive loadings in the qualification process of aluminium alloys
Bauer-Troßmann, Kathrin; Yu, L.; Melz, Tobias; Oechsner, Michael; Kaufmann, Heinz | Conference Paper |
| 2014 | SiWind - neuer Werkstoff für Offshore-Windenergieanalgen. Tl.2: Zyklische Werkstoffprüfung
Bleicher, Christoph; Wagener, Rainer; Kaufmann, Heinz; Melz, Tobias | Journal Article |
| 2014 | Smart Droop Nose for application to Laminar Wing of future Green Regional A/C
Weber, D.; Mueller-Roemer, J.; Simpson, J.; Adachi, S.; Herget, W.; Landersheim, Volker; Laveuve, Dominik | Conference Paper |
| 2014 | Smart material wolf note eliminators
Neubauer, Philipp; Tschesche, Johannes; Bös, Joachim; Melz, Tobias; Hanselka, Holger | Conference Paper |
| 2014 | Smarte Turmsensorik
Friedmann, Andreas | Journal Article |
| 2014 | Sorptionsmessungen und dynamisch-mechanische Analyse zur Vorhersage der Wirkung von Feuchte und organischen Substanzen auf die Kunststoffalterung
Alig, Ingo; Oehler, Harald; Bargmann, Maike; Kunkel, Daniel | Conference Paper |
| 2014 | Statistical approach for active buckling control with uncertainty
Enß, Georg Christoph; Platz, Roland | Conference Paper |
| 2014 | Stellantrieb und Verfahren zum Entwärmen eines in einem Stellantrieb mit einem Stellglied eingehausten Festkörperaktors
Melz, Tobias; Matthias, Michael; Hanselka, Holger | Patent |
| 2014 | Structural durability design recommendations for forged automotive aluminium chassis components submitted to spectrum and environmental loadings by the example of a tension strut
Hägele, N.; Sonsino, C.M. | Journal Article |
| 2014 | Studying Binary Solvent Mixtures as Mobile Phase for Thermal Gradient Interactive Chromatography (TGIC) of Poly(ethylene-stat-1-octene)
Mekap, Dibyaranjan; Macko, Tibor; Brüll, Robert; Cong, Rongjuan; Groot, A. Willem de | Journal Article |
| 2014 | Studying the interactions of polyethylene with graphite in the presence of solvent by high temperature thermal gradient interactive chromatography, thermal gradient nuclear magnetic resonance spectroscopy, and solution differential scanning calorimetry
Mekap, D.; Malz, F.; Brull, R.; Zhou, Z.; Cong, R.; Groo, A.W. de; Parrott, A.R. | Journal Article |
| 2014 | Synthesis and characterization of iPP-sPP stereoblock produced by a binary metallocene system
Descour, C.; Macko, T.; Cavallo, D.; Parkinson, M.; Hubner, G.; Spoelstra, A.; Villani, M.; Duchateau, R. | Journal Article |
| 2014 | Technische Kunststoffe - Zukunftspotenzial für Mobilitätstechnologien
Melz, Tobias | Journal Article |
| 2014 | Untersuchungen von Schwindungsporositäten mittels mechanisierter Ultraschallprüfung mit Sampling Phased Array Technik an Sphäroguss von Windkraftanlagenkomponenten zur Abschätzung ihrer Schwingfestigkeit
Kurz, Jochen Horst; Bleicher, Christoph; Bulavinov, Andrey; Heinrietz, Andre; Maisl, Ute; Maisl, Michael; Pinchuk, Roman; Pudovikov, Sergey; Tsyban, Alexandra | Conference Paper |
| 2014 | Usage of reduced numerical models in the design process of a shunted piezoelectric isolator
Bartel, T.; Heuss, O.; Melz, T.; Scinocca, F.; Nabarrete, A.; Goes, L.C.S. | Conference Paper |
| 2014 | Verfahren zum Prüfen oder Identifizieren einer Modellstruktur
Haffke, Björn; Möller, Riccardo | Patent |
| 2014 | Verfahren zur Herstellung einer Klebeverbindung oder eines Verbundwerkstoffes und dafür geeignete Klebe- oder...
Marchegiani, Marco; Kreichkenbaum, Alexandra; Bergmann, Marvin; Wieser, Jürgen; Spahn, Peter | Patent |
| 2014 | Vergleich der Wirkung adaptronischer Wolfstöter
Bös, Joachim; Melz, T.; Tschesche, Johannes; Thyes, Christian | Conference Paper |
| 2014 | Verwendung von organischen Oxyimiden als Flammschutzmittel für Kunststoffe sowie flammgeschützte Kunststoffzusammensetzung und hieraus hergestelltem Formteil
Pfaendner, Rudolf; Metzsch-Zilligen, Elke; Stec, Maria | Patent |
| 2014 | Vibration-based energy harvesting with stacked piezoelectrets
Pondrom, P; Hillenbrand, J.; Sessler, G.M.; Bös, J.; Melz, T. | Journal Article |
| 2014 | Vibrational energy flow in carbon composite structures
Jaber, Mariam; Schneeweiß, Helmut; Bös, Joachim; Melz, Tobias | Conference Paper |
| 2014 | Vorrichtung zum Ermitteln der Korrosivität einer Kunststoffschmelze
Steinhoff, Bernd; Kothe, Hans; Lellinger, Dirk | Patent |
| 2014 | Vorrichtung, die zur Eigenfortbewegung längst einer Tragstruktur befähigt ist, sowie deren Verwendung
Melz, Tobias; Koch, Thorsten; Hanselka, Holger; Platz, Roland | Patent |
| 2014 | Wahrnehmung von Getriebegeräuschen - Einflüsse und Störgrößen bei Prüfstandversuchen
Bös, Joachim; Melz, Tobias; Moritz, Karsten; Ochs, Steffen | Conference Paper |
| 2014 | Werkstoffbasierte Lebensdauerabschätzung von Schmiedebauteilen aus Stahl und Aluminium
Hell, Matthias; Wagener, Rainer; Melz, Tobias | Journal Article |
| 2014 | Wind tunnel test and CFD/CAA analysis on a scaled model of a nose landing gear
Adachi, Seiji; Brandstätt, Peter; Herget, Wolfgang; Leistner, Philip; Landersheim, Volker; Weber, Daniel; Mueller-Roemer, Johannes | Conference Paper |