Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2020Flame retardant polyester by combination of organophosphorus compounds and an NOR radical forming agent
Goedderz, D.; Weber, L.; Markert, D.; Schießer, A.; Fasel, C.; Riedel, R.; Altstädt, V.; Bethke, C.; Fuhr, O.; Puchtler, F.; Breu, J.; Döring, M.
Journal Article
2019Accurate determination of the layer thickness of a multilayer polymer film by non-invasive multivariate confocal Raman microscopy
Zou, M.Y.; Barton, B.; Geertz, G.; Brüll, R.
Journal Article
2019Assessment of the Fatigue Strength of Thick-Walled Nodular Cast Iron with Dross
Bleicher, Christoph; Wagener, Rainer; Kaufmann, Heinz; Tschuncky, Ralf; Weber, Fabian; Hettich, Philipp; Buchmüller, Steffen; Berg, Hans W.
Journal Article, Conference Paper
2019Benchmarking Workshop on (active) vibration damping
Reischl, Daniel; Mayer, Dirk; Herold, Sven; Mrak, Branimir; Venkatesan, S.K.; Berger, Wolfgang; Nader, Manfred; Depraetere, Bruno
Conference Paper
2019Characterization of the Cyclic Material Behavior of AlSi10Mg and Inconel® 718 produced by SLM
Scurria, Matilde; Möller, Benjamin; Wagener, Rainer; Bein, Thilo
Conference Paper
2019Comparison of constrained parameterisation strategies for aerodynamic optimisation of morphing leading edge airfoil
Magrini, A.; Benini, E.; Ponza, R.; Wang, C.; Khodaparast, H.H.; Friswell, M.I.; Landersheim, V.; Laveuve, D.; Contell Asins, C.
Journal Article
2019Conceptual-level evaluation of a variable stiffness skin for a morphing wing leading edge
Wang, C.; Haddad Khodaparast, H.; Friswell, M.I.; Magrini, A.; Ponza, R.; Benini, E.; Landersheim, V.; Laveuve, D.; Contell Asins, C.
Journal Article
2019Deriving strain based local structural element concept for the fatigue assessment of additively manufactured structures
Wagener, R.; Möller, B.; Melz, T.; Scurria, M.
Report
2019Development of a rotational energy harvesting tuned vibration absorber for torsional vibrations
Infante, Francesco
Dissertation
2019Effect of the Surface Finish on the Cyclic Behavior of Additively Manufactured AlSi10Mg
Scurria, Matilde; Möller, Benjamin; Wagener, Rainer; Melz, Tobias
Conference Paper
2019Effects of Surface Preparation, Support Structures and Build Orientation on the Cyclic Stress-Strain Behavior of Inconel®718 Produced by SLM
Scurria, Matilde; Möller, Benjamin; Wagener, Rainer; Pena, Jose; Bein, Thilo
Report
2019Einfluss des Korrosionsverhaltens von Aluminiumlegierungen auf das Korrosionsermüdungsverhalten im Einstufen- und Betriebslastenversuch
Bauer-Troßmann, Kathrin
: Melz, T.; Oechsner, M.
Dissertation
2019Elastomere Sensorwerkstoffe zur Digitalisierung industrieller Prozesse
Kaal, William; Rieß, Sebastian
Journal Article
2019EMPT verbindet Stahl und Alu so fest wie herkömmlich geschweißt
Baumgartner, Jörg
Journal Article
2019Extreme Yield Figures for Universal Strength Criteria
Rosendahl, P.L.; Kolupaev, Vladimir A.; Altenbach, Holm
Book Article
2019Fatigue behavior of large cast components under variable amplitude loading with overloads
Bleicher, C.; Wagener, R.; Kaufmann, H.
Report
2019Fatigue strength assessment of TIG-dressed welded steel joints by local approaches
Baumgartner, J.; Yildirim, H.C.; Barsoum, Z.
Journal Article
2019Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit. Jahresbericht 2018
 
Annual Report
2019Frequency-dependent material properties of copper and aluminum alloys
Loos, D.; Barti, E.; Schröter, G.; Wagener, R.; Melz, T.
Journal Article
2019Halogen-Free Flame-Retardant Compounds. Thermal Decomposition and Flammability Behavior for Alternative Polyethylene Grades
Luyt, Adriaan Stephanus; Malik, Sarah Shahid; Gasmi, Soumia Abderrazak; Porfyris, Athanasios; Andronopoulou, Anna; Korres, Dimitrios; Vouyiouka, Stamatina; Großhauser, Michael; Pfaendner, Rudolf; Brüll, Robert; Papaspyrides, Constantine
Journal Article
2019Heat capacity spectroscopy by using stochastic temperature modulated calorimetry: Time-temperature superposition and fictive temperature at the glass transition of poly (vinyl acetate)
Alig, I.; Böhm, F.; Lellinger, D.
Journal Article
2019High performance liquid chromatography of polyolefin plastomers/elastomers (ethylene/1-octene copolymers) - Comparison of different solvent systems
Arndt, Jan-Hendrik; Brüll, Robert; Macko, Tibor; Garg, Praveen; Tacx, Jacques C.J.F.
Journal Article
2019Hochfrequente Charakterisierung und Modellierung von Elastomerlagern
Kaal, William; Rieß, Sebastian
Journal Article
2019HPLC Separation of Ethylene-Vinyl Acetate Copolymers According to Chemical Composition
Macko, T.; Arndt, J.-H.; Brüll, R.
Journal Article
2019Hybride Methoden und Entwicklungswerkzeuge für effizienteres Testen und Entwickeln
Hansmann, Jan; Millitzer, Jonathan; Rieß, Sebastian; Balzer, Louis
Journal Article
2019Improvement of fracture toughness and glass transition temperature of DGEBA‐based epoxy systems using toughening and crosslinking modifiers
Utaloff, K.; Kothmann, M.H.; Ciesielski, M.; Döring, M.; Neumeyer, T.; Altstädt, V.; Gorman, I.; Henningsen, M.
Journal Article
2019In-situ X-ray computed tomography of composites subjected to fatigue loading
Wagner, Peter; Schwarzhaupt, Oliver; May, Michael
Journal Article
2019Influence of annealing conditions on elastic and dielectric properties of P(VDF-TrFE) copolymer and its composites
Belovickis, Jaroslavas; Werne, Lisa; Silibin, Maxim; Samulionis, Vytautas; Lellinger, Dirk; Oehler, Harald; Banys, Juras; Sysa, Artem; Nekludov, Kapiton; Shvartsman, Vladimir V.; Alig, Ingo
Journal Article
2019Investigations of passive wing technologies for load reduction
Krüger, W.R.; Dillinger, J.; Breuker, R. de; Haydn, K.
Journal Article
2019Machbarkeitsstudie zur Verwendung energieautarker adaptiver Schwingungstilger in technischen Anwendungen
Koch, Michael; Mayer, Dirk
Conference Paper
2019Modeling fatigue life of composite laminates: A statistical micro-mechanics approach
Laveuve, D.M.; Bütter, A.
Journal Article
2019Multiscale Structure and Microscopic Deformation Mechanisms of Gel-Spun Ultrahigh-Molecular-Weight Polyethylene Fibers
Balzano, L.; Coussens, B.; Engels, T.; Oosterlinck, F.; Vlasblom, M.; Werff, H. van der; Lellinger, D.
Journal Article
2019Non-isothermal crystallization of polypropylene with sorbitol-type nucleating agents at cooling rates used in processing
Schawe, Jürgen E.K.; Budde, Felix; Alig, Ingo
Journal Article
2019Novel amphiphilic block copolymer modifiers based on chain‐extended polyester for improved toughness of epoxy resins
Schneider, J.-P.; Just, B.; Döring, M.
Journal Article
2019A Novel Method for Active Vibration Control of Steering Wheel
Kuwar, V.; Setia, S.; Pachhapurkar, N.; Pawar, P.R.; Santosh Jambhale, M.; Ramesh Saraf, M.; Millitzer, J.; Koch, T.; Herold, S.
Report
2019Novel phosphinate‐containing zinc polyacrylate and its utilization as flame retardant for polyamides
Garth, K.; Döring, M.; Kraemer, R.; Roth, M.; Thomas, C.
Journal Article
2019Phosphorus Containing Polyacrylamides as Flame Retardants for Epoxy-Based Composites in Aviation
Greiner, L.; Kukla, P.; Eibl, S.; Döring, M.
Journal Article
2019Poly (butyl acrylate)-graft-polystyrene synthesis by free-radical polymerization: Interplay between structure, morphology, mechanical, and optical properties
Fage, J.; Knoll, K.; Niessner, N.; Carstensen, O.; Schulz, T.; Malz, F.; Döring, M.; Schönberger, F.
Journal Article
2019Polymer-induced metal diffusion during plastic processing: A reason for deposit formation
Sonnenberg, M.; Gustus, R.; Sedelmeier, S.; Wegewitz, L.; Höfft, O.; Wieser, J.; Maus-Friedrichs, W.
Journal Article
2019Studying the bivariate tacticity distribution of poly-1-octene using two-dimensional liquid chromatography coupled with NMR
Rode, K.; Malz, F.; Arndt, J.-H.; Macko, T.; Horchler, G.; Yu, Y.; Brüll, R.
Journal Article
2019Synergistic flame retardant interplay of phosphorus containing flame retardants with aluminum trihydrate depending on the specific surface area in unsaturated polyester resin
Reuter, Jens; Greiner, Lara; Schönberger, Frank; Döring, Manfred
Journal Article
2019Synergy between melamine cyanurate, melamine polyphosphate and aluminum diethylophosphinate in flame retarded thermoplastic polyurethane
Sut, Aleksandra; Metzsch-Zilligen, Elke; Großhauser, Michael; Pfaendner, Rudolf; Schartel, Bernhard
Journal Article
2019Tadellos gefügt
Zeidler-Finsel, Anke
Journal Article
2019Two control strategies for semi-active load path redistribution in a load-bearing structure
Gehb, Christopher Maximilian; Platz, Roland; Melz, Tobias
Journal Article
2019Uncertainty quantification in the mathematical modelling of a suspension strut using Bayesian inference
Mallapur, Shashidhar; Platz, Roland
Journal Article
2019Wireless Sensor Networks and Energy Harvesting for Energy Autonomous Smart Structures
Grasböck, Lukas; Humer, Alexander; Nader, Manfred; Schagerl, Martin; Mayer, Dirk; Misol, Malte; Humer, Christoph; Herold, Sven; Monner, Hans Peter
Conference Paper
2018Active vibration reduction of ship propulsion systems
Bartel, Torsten; Herold, Sven; Infante, Francesco; Käsgen, Johannes; Matthias, Michael; Millitzer, Jonathan; Perfetto, Sara
Conference Paper
2018An active-system approach for eliminating the wolf note on a cello
Neubauer, Philipp; Tschesche, Johannes; Bös, Joachim; Melz, Tobias; Hanselka, Holger
Journal Article
2018Additives: Secondary raw materials of the future
Schultheis, C.; Metzsch-Zilligen, E.; Pfaendner, R.
Journal Article
2018Alternative formulations of standard criteria
Kolupaev, V.A.
Book Article
2018Analyse des Schwingfestigkeitsverhaltens von drossbehaftetem Gusseisen mit Kugelgraphit
Bleicher, Christoph
Journal Article
2018Anwendungspotential von Laserstrahl- und Laserhybridschweißnähten für Stumpfstoßverbindungen ultrahochfester Feinkornbaustähle
Seyfried, Benjamin; Möller, Benjamin; Knödel, Peter; Wagener, Rainer; Ummenhofer, Thomas; Melz, Tobias
Conference Paper
2018Applications
Kolupaev, V.A.
Book Article
2018Betriebsfestigkeit lasergeschweißter Stumpfnähte für den Einsatz in Kranstrukturen am Beispiel des Feinkornbaustahls S1100QL
Möller, Benjamin; Seyfried, Benjamin; Wagener, Rainer; Knödel, Peter; Melz, Tobias; Ummenhofer, T.
Conference Paper
2018Bewertung der Schallabstrahlung dünnwandiger Strukturen anhand der Analyse der Strukturintensität
Schaal, Clarissa; Groba, Peter; Bös, Joachim; Melz, Tobias
Conference Paper
2018Characterization of the chemical composition distribution of polyolefin plastomers/elastomers (ethylene/1-octene copolymers) and comparison to theoretical predictions
Arndt, Jan-Hendrik; Brüll, Robert; Macko, Tibor; Garg, Praveen; Tacx, Jacques
Journal Article
2018Charakterisierung variierter Randzonenzustände an Gussbauteilen und Bewertung des Einflusses auf die Ermüdungsfestigkeit
Bergner, Kim Martine; Bleicher, Christoph; Wagener, Rainer; Melz, Tobias
Conference Paper
2018Combination of material characterization and cyclic fatigue testing for investigation of elastomer aging
Lellinger, Dirk; Kroth, Thomas; Reinhardt, Marc; Bitsch, Thorsten; Kühne, Kai; Rode, Karsten; Malz, Frank; Wallmichrath, Marc; Alig, Ingo
Book Article
2018A comparative study of various joining techniques fatigue behaviour focusing on stiffness degradation
Rösch, Peter; Bruder, Thomas; Bein, Thilo
Journal Article, Conference Paper
2018Comparison of strength criteria based on the measurements on concrete
Kolupaev, V.A.; Yu, M.-H.; Altenbach, H.; Bolchoun, A.
Journal Article
2018Conditions and assumptions of strength criteria
Kolupaev, V.A.
Book Article
2018Correlation between comprehensive 2D liquid chromatography and Monte Carlo simulations for branched polymers
Apel, Nico; Ramakrishnan, Vaidyanath; Uliyanchenko, Elena; Moyses, Stephan; Wold, Christian; Macko, Tibor; Brüll, Robert
Journal Article
2018Crack propagation in PE-HD induced by environmental stress cracking (ESC) analyzed by several imaging techniques
Schilling, Markus; Niebergall, Ute; Alig, Ingo; Oehler, Harald; Lellinger, Dirk; Meinel, Dietmar; Böhning, Martin
Journal Article
2018Crash and durability of aluminum and mixed steel aluminum joints made by electromagnetic pulse welding
Huberth, F.; Klitschke, S.; Gall, M.; Sommer, S.; Schnabel, K.; Baumgartner, J.
Conference Paper
2018Criteria of equivalent stress concept
Kolupaev, V.A.
Book Article
2018Critical distance approach for the fatigue strength assessment of magnesium welded joints in contrast to Neuber's effective stress method
Karakaş, Ö.; Zhang, G.; Sonsino, C.M.
Journal Article
2018Definition of a loading scenario and experimental verification on a material handlers load arm
Herbert, Andreas; Käsgen, Johannes
Conference Paper
2018Design development of rotational energy harvesting vibration absorber (R-EHTVA)
Infante, F.; Kaal, W.; Perfetto, S.; Herold, S.
Conference Paper
2018Development and implementation of a multi-channel active control system for the reduction of road induced vehicle interior noise
Gäbel, Gunnar; Millitzer, Jonathan; Atzrodt, Heiko; Herold, Sven; Mohr, Andreas
Journal Article
2018Digitaler Zwilling eines servohydraulischen Prüfstands zur Durchführung virtueller Prüfungen an mechatronischen Wankstabilisatoren
Landersheim, Volker; Fischer, Felix; Möller, Ricardo; Huang, Ha; Awad, Hasan
Conference Paper
2018Dimensionless values for comparison
Kolupaev, V.A.
Book Article
2018Effect of static axial loads on the lateral vibration attenuation of a beam with piezo-elastic supports
Götz, Benedict; Platz, Roland; Melz, Tobias
Journal Article
2018Effect of the material modeling and the experimental material characterisation on fatigue life estimation within strain-based fatigue assessment approaches
Hell, Matthias; Wagener, Rainer; Kaufmann, Heinz; Melz, Tobias
Journal Article
2018Efficient and parametric digital twins for system engineering applications
Tamm, Christoph
Conference Paper
2018Effiziente phosphorhaltige Stabilisatoren auf Basis von Diphenyl-amin und heterocyclischer Diphenylamin-Derivate
Briesenick, Max; Ciesielski, Michael; Pfaendner, Rudolf
Patent
2018Einfluss der metallurgischen Eigenschaften der Gesenkteilungsebene auf die Schwingfestigkeit warm massivumgeformter Stahlbauteile
Wagener, Rainer; Scurria, Matilde; Möller, Benjamin; Schuster, J.
Conference Paper
2018Einflüsse auf das zyklische Spannungs-Dehnungsverhalten von additiv gefertigten Strukturen aus AlSi10Mg
Wagener, Rainer; Scurria, Matilde; Möller, Benjamin
Conference Paper
2018Einflüsse der Oberflächenbehandlung und Aufbaurichtung auf das zyklisch Spannungs-Dehnungs-Verhalten von additiv gefertigten Strukturen aus Inconel 718
Scurria, Matilde; Möller, Benjamin; Wagener, Rainer; Melz, Tobias
Conference Paper
2018Electrochemical characterization of automotive aluminum alloys regarding their corrosion fatigue behavior
Engler, T.; Andersohn, G.; Oechsner, M.; Araújo, F.D. de; Kaufmann, H.; Melz, T.
Journal Article
2018Enhanced lightweight design by composites - results of the EU project ENLIGHT
Mayer, Dirk; Bein, Thilo; Buff, Hendrik; Götz, Benedict; Schwarzhaupt, Oliver; Spancken, Dominik
Journal Article
2018Entwicklung einer robusten Berechnungsmethode zur Bestimmung der Strukturintensität von dünnwandigen, gekrümmten Bauteilen unter Zuhilfenahme virtueller Messdaten
Kleinfeller, Nikolai; Bös, Joachim; Melz, Tobias
Conference Paper
2018Entwicklung passiver und aktiver Maßnahmen zur Minderung der Schalltransmission durch Doppelglas-Fensterscheiben
Klaus, Tim Bastian
: Melz, Tobias (Berichterstatter); Beidl, Christian (Mitberichterstatter)
Dissertation
2018Equivalent stress concept for limit state analysis
Kolupaev, Vladimir, A.
Book
2018Estimation of power input and output of structures using structural intensity measurements
Groba, Peter; Ebert, Johannes; Stoewer, Torsten; Bös, Joachim; Melz, Tobias
Conference Paper
2018Experimental characterisation of a flat dielectric elastomer loudspeaker
Rustighi, Emiliano; Kaal, William; Herold, Sven; Kubbara, Ahmed
Journal Article
2018Experimentelle und numerische Ermittlung der Verbundsteifigkeiten und thermischen Ausdehnung von Kupferwicklungen
Loos, D.; Barti, E.; Wagener, R.; Melz, Tobias
Conference Paper
2018Experimentelle Untersuchung der Ähnlichkeit skalierter Plattenstrukturen
Adams, Christian; Bös, Joachim; Melz, Tobias
Conference Paper
2018Experiments and equipment
Kolupaev, V.A.
Book Article
2018Fatigue assessment of EMPT-welded joints using the reference radius concept
Baumgartner, J.; Schnabel, K.; Huberth, F.
Journal Article, Conference Paper
2018Fatigue behaviour of aluminium tube crimp connections applying the electromagnetic pulse technology
Lipp, Klaus; Schaefer, R.; Horwatitsch, D.
Journal Article, Conference Paper
2018Fatigue life curve - a continuous Wöhler curve from LCF to VHCF
Wagener, Rainer; Melz, Tobias
Journal Article
2018Fitting of criteria
Kolupaev, V.A.
Book Article
2018Formulations of classical strength hypotheses
Kolupaev, V.A.
Book Article
2018Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit. Jahresbericht 2017
 
Annual Report
2018Frequency and temperature dependent stiffness and damping properties of reduced viscoelastic structures using component mode synthesis (CMS)
Somesan, Vlad; Barti, Endre; Bein, Thilo
Report
2018Gain-scheduled H∞ buckling control of a circular beam-column subject to time-varying axial loads
Schäffner, Maximilian; Platz, Roland
Journal Article
2018Generalized cavitation criterion for poro-hyperelastic materials
Drass, M.; Kolupaev, V.; Rosendahl, P.L.; Schneider, J.; Becker, W.
Conference Paper
2018Generalized pressure-insensitive criteria
Kolupaev, V.A.
Book Article
2018Generalized pressure-sensitive criteria
Kolupaev, V.A.
Book Article
2018Grundlagen für die Bemessung druckwasserexponierter Komponenten unter Berücksichtigung werkstoffspezifischer Eigenschaften und Schädigungsmechanismen
Schmiedl, Tobias; Melz, Tobias
Conference Paper
2018Implementation of a modular model for active engine mounts and coupling with a reduced model for full-vehicle NVH-simulation
Grimm, A.; Finger, Karsten; Stoll, G.; Atzrodt, H.; Herold, S.
Conference Paper
2018Influence of different load histories on the cyclic material behavior of nodular cast iron for thick-walled application
Bleicher, C.
Journal Article
2018Influence of salt corrosion on the fatigue behaviour of aluminium alloys for chassis components under constant and variable amplitude loading
Duarte de Araújo, F.; Engler, T.; Andersohn, G.; Oechsner, M.; Kaufmann, H.; Schönborn, S.; Melz, T.
Journal Article, Conference Paper
2018Innovative testing process for electric powertrains
Nickel, D.; Stelter, E.; Sültrop, C.; Mittmann, W.; Heiduczek, T.; Hohenner, H.
Conference Paper
2018Introduction
Kolupaev, V.A.
Book Article
2018Iron Oxide Superparticles with Enhanced MRI Performance by Solution Phase Epitaxial Growth
Kluenker, M.; Tahir, M.N.; Dören, R.; Deuker, M.; Komforth, P.; Plana-Ruiz, S.; Barton, B.; Shylin, S.I.; Ksenofontov, V.; Panthöfer, M.; Wiesmann, N.; Herzberger, J.; Möller, A.; Frey, H.; Brieger, J.; Kolb, U.; Tremel, W.
Journal Article
2018Isogonal and isotoxal hexagons as extremal yield figures
Altenbach, H.; Rosendahl, P.L.; Becker, W.; Kolupaev, V.A.
Abstract
2018Lightweight Automobiles ALLIANCE Project: First Results of Environmental and Economic Assessment from a Life-Cycle Perspective
Delogu, Massimo; Pero, Francesco del; Zanchi, Laura; Ierides, Marcos; Fernandez, Violeta; Seidel, Kristian; Thirunavukkarasu, Dinesh; Bein, Thilo
Report
2018Eine Methode zur Festigkeitsbeurteilung von laserstrahlgeschweißten Magnesium-Verbindungen unter mehrachsigen Beanspruchungen mit konstanten und variablen Amplituden
Bolchoun, Alexandre
: Melz, Tobias (1. Gutachter); Sonsino, Cetin Morris (2. Gutachter); Schäfer, M. (3. Gutachter)
Dissertation
2018Modellbasierte Gleitzustandsansätze zur Regelung von Ruckelschwingungen in Fahrzeugantriebssträngen
Yousif, Leonard
Dissertation
2018Monomere in den Adern
Klein, Roland; Popzyk, Marie-Isabel; Burlon, Konrad; Wennemann, Katharina; Karl, Janis; Köhler, Thomas; Wischnowski, Marko; Gries, Thomas
Journal Article
2018Monomers coursing through the veins
Klein, R.; Popzyk, M.-I.; Burlon, K.; Wennemann, K.; Karl, J.; Köhler, T.; Wischnowski, M.; Gries, T.
Journal Article
2018Multi-surface criteria
Kolupaev, V.A.
Book Article
2018New developments in flame-retardant polystyrene foams
Döring, M.
Conference Paper
2018Novel N-phosphorylated iminophosphoranes based on 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide
Weinert, Michael; Fuhr, Olaf; Döring, Manfred
Journal Article
2018Novel organophosphorus flame retardants and their synergistic application in novolac epoxy resin
Schmidt, Christian; Ciesielski, Michael; Greiner, Lara; Döring, Manfred
Journal Article
2018Nucleation activity at high supercooling: Sorbitol-type nucleating agents in polypropylene
Schawe, Jürgen E.K.; Budde, Felix; Alig, Ingo
Journal Article
2018On cavitation in transparent structural silicone adhesive: TSSA
Drass, Michael; Kolupaev, Vladimir A.; Schneider, Jens; Kolling, Stefan
Journal Article
2018Online listening test to evaluate the gear mesh noise of inequidistant gearings
Neubauer, Philipp; Bös, Joachim; Melz, Tobias
Conference Paper
2018Optimization of a vibration absorber with piezoelectric energy harvesting capabilities
Perfetto, Sara
Dissertation
2018Passive, adaptive, active vibration control, and integrated approaches
Mayer, Dirk; Herold, Sven
Book Article
2018Phosphorus Containing Polymers as Flame Retardants
Döring, Manfred
Abstract
2018Preliminary acousto-ultrasonic investigation for multi-parameter transducer self-diagnostic system in composites
Memmolo, V.; Park, Y.J.; Lilov, M.; Monaco, E.; Ricci, F.
Journal Article
2018Prognostics and health monitoring for ECU based on piezoresistive sensor measurements
Palczynska, Alicja
Dissertation
2018Quantification of uncertainty in the mathematical modelling of a multivariable suspension strut using bayesian interval hypothesis-based approach
Mallapur, Shashidhar; Platz, Roland
Conference Paper
2018Rapid mass calorimeter as a high-throughput screening method for the development of flame-retarded TPU
Sut, Aleksandra; Metzsch-Zilligen, Elke; Großhauser, Michael; Pfaendner, Rudolf; Schartel, Bernhard
Journal Article
2018Recent developments in hardware-in-the-loop testing
Millitzer, Jonathan; Mayer, Dirk; Henke, Christian; Jersch, Torben; Tamm, Christoph; Michael, Jan; Ranisch, Christopher
Conference Paper
2018Rechnerische Lebensdauerabschätzung mit Berücksichtigung der Ergebnisse aus Umformsimulationen
Störzel, Klaus; Kraemer, F.; Bernhard, Julian; Oechsner, M.
Conference Paper
2018Scaling laws obtained from a sensitivity analysis and applied to thin vibrating structures
Adams, Christian; Bös, Joachim; Slomski, Elena M.; Melz, Tobias
Journal Article
2018Schwingfestigkeitsbewertung von additiv gefertigten metallischen Bauteilen
Schnabel, Kai; Baumgartner, Jörg; Choccia, Andreas
Conference Paper
2018Sekundärrohstoffe der Zukunft
Schultheis, Christoph; Metzsch-Zilligen, Elke; Pfaendner, Rudolf
Journal Article
2018Separation of branched Poly(bisphenol A carbonate) structures by solvent gradient at near-critical conditions and two-dimensional liquid chromatography
Apel, Nico; Uliyanchenko, Elena; Moyses, Stephan; Rommens, Stijn; Wold, Christian; Macko, Tibor; Brüll, Robert
Journal Article
2018Stability, performance and power consumption of a centralised and decentralised active vibration control system
Lapiccirella, Giovanni; Rohlfing, Jens
Conference Paper
2018Strength criteria for concrete and their comparison with experiments
Altenbach, Holm; Kolupaev, Vladimir
Conference Paper
2018Structural health monitoring of composite aerospace structures with acoustic emission
Lehmann, Martin; Büter, Andreas; Schwarzhaupt, Oliver; Contell Asins, Conchin
Conference Paper
2018Summary and outlook
Kolupaev, V.A.
Book Article
2018TRANSFORMERS - Configurable and Adaptable Trucks and Trailers for Optimal Transport
Adams, Paul; Nitzsche, Gunter; Löfstrand, Sofia; Selas, A.; Arts, G.; Adesiyun, A.; Wagner, S.; Koch, T.; Jacob, B.; Schmidt, F.; Billiet, M.; Hariram, A.; Queckenstedt, B.; Koornneef, G.; Zweep, C. van der; Bertens, T.; Hillbrand, B.
Conference Paper
2018Uncertainty quantification in case of imperfect models: A non-bayesian approach
Kohler, Michael; Krzyzak, Adam; Mallapur, Shashidhar; Platz, Roland
Journal Article
2018Verfahren zur Erniedrigung der Kristallisationstemperatur von teilkristallinen Polyamiden, hierdurch hergestellte Polyamidformmasse sowie Verwendung von mehrfunktionellen umesterungsfähigen organischen Phosphoniten, organischen Phosphiten, organischen Phosphaten bzw. Mischungen hiervon zur Erniedrigung der Kristallisationstemperatur, zur Vernetzung und/oder Verzweigung von teilkristallinen Polyamiden
Groos, Benjamin; Pfaendner, Rudolf
Patent
2018Verfahren zur Herstellung eines Polymerisates durch Nitroxyl-kontrollierte Polymerisation sowie Polymerisat
Burlon, Konrad; Klein, Roland; Mazurowski, Markus; Pfaendner, Rudolf; Wittemann, Matthias
Patent
2018Verpackungssystem sowie Verfahren zum Verpacken von Stückgut
Berges, Claudia; Berges, Dirk; Metzsch-Zilligen, Elke; Pfaendner, Rudolf
Patent
2018Visualization methods
Kolupaev, V.A.
Book Article
2018Visualization of standard criteria
Kolupaev, V.A.
Book Article
2018Welche Materialien stabil bleiben
Schultheis, Christoph; Großhauser, Michael; Metzsch-Zilligen, Elke; Pfaendner, Rudolf
Journal Article
2018Wie wirksam sind Haftvermittler?
Arndt, Jan-Hendrik; Brüll, Robert
Journal Article
2018Zielgrößenbestimmung zur Durchführung einer Sensitivitätsanalyse bei der Absorptionsgradmessung im Kundt’schen Rohr
Wenzel, Sören; Grebel, Antje; Slomski-Vetter, Elena; Bös, Joachim; Melz, Tobias
Conference Paper
2018Zur Beurteilung der Betriebsfestigkeit von Gusseisen mit Kugelgraphit unter Beanspruchungszeitfunktionen mit Überlasten
Bleicher, Christoph; Kaufmann, Heinz; Wagener, Rainer; Melz, Tobias
Conference Paper
201735th IMAC, a Conference and Exposition on Structural Dynamics 2017. Proceedings. Vol.3: Model validation and uncertainty quantification. Preface
Barthorpe, R.; Platz, R.; Lopez, I.; Moaveni, B.; Papadimitriou, C.
Conference Paper
2017Ableitung einer kontinuierlichen Bemessungswöhlerlinie von der Kurzzeitfestigkeit bis in die Langzeitfestigkeit
Wagener, Rainer; Melz, Tobias
Conference Paper
2017Active vibration isolation with a dielectric elastomer stack actuator
Kaal, W.; Bartel, T.; Herold, S.
Journal Article
2017Akustik 3D-gedruckter Zahnräder
Neubauer, Philipp; Bös, Joachim; Melz, Tobias
Conference Paper
2017Eine Analyse des Anwendungspotenzials von piezoelektrischen Netzwerken im Maschinenbau
Heuss, Oliver
: Melz, Tobias (Berichterstatter); Rinderknecht, Stephan (Mitberichterstatter)
Dissertation
2017Analysis of the energy exchange between coupled subsystems by means of the divergence in the vibratory energy field
Groba, Peter; Ebert, Johannes; Stoewer, Torsten; Bös, Joachim; Melz, Tobias
Conference Paper
2017Anordnung und Verfahren zur Beeinflussung und/oder Detektion einer dynamischen oder statischen Eigenschaft einer Tragstruktur
Mayer, Dirk; Salloum, Rogério
Patent
2017An approach for the design of a mechanical Hardware-in-the-Loop interface
Millitzer, Jonathan; Ranisch, Christopher; Tamm, Christoph; Bartolozzi, Riccardo; Melz, Tobias
Conference Paper
2017Approach to prove the efficiency of the Monte Carlo method combined with the elementary effect method to quantify uncertainty of a beam structure with piezo-elastic supports
Li, S.; Goetz, B.; Schaeffner, M.; Platz, R.
Conference Paper
2017Bayesian inference approach to evaluate the uncertainty in the mathematical modelling of a suspension strut
Mallapur, Shashidhar; Platz, Roland
Conference Paper
2017A benchmark case for structural intensity calculations
Adams, Christian; Bös, Joachim; Melz, Tobias
Conference Paper
2017Beurteilung der Schwingfestigkeit von lunkerbehaftetem Gusseisen mit Kugelgrafit aus Röntgenbildern
Bleicher, Christoph
Journal Article
2017Bewertung der Betriebsfestigkeit sicherheitsrelevanter, hartgelöteter Fügeverbund
Melz, Tobias; Tillmann, Wolfgang; Bobzin, Kirsten; Baumgartner, J.; Manke, M.; Sievers, N.; Wiesner, S.; Schütt, T.
Conference Paper
2017Bewertung des Einflusses von Extremlasten auf das zyklische Werkstoffverhalten von Gusseisen mit Kugelgraphit
Bleicher, Christoph; Wagener, Rainer; Melz, Tobias
Conference Paper
2017Combination of cyclic fatigue testing and materials characterisation to investigate ageing of elastomers
Kroth, T.; Lellinger, D.; Alig, Ingo; Wallmichrath, Marc
Journal Article
2017Comparison of control strategies for global load path redistribution in a load-bearing structure
Gehb, Christopher; Platz, Roland; Melz, Tobias
Conference Paper
2017Comparison of sampling techniques for global sensitivity analyses of scaled vibrating structures
Adams, Christian; Bös, Joachim; Slomski, Elena M.; Melz, Tobias
Conference Paper
2017Computer-Integrated Engineering and Design
Martins, T.W.; Abedini, S.; Ahmels, L.; Albrecht, K.; Anderl, R.; Bruder, E.; Groche, P.; Kaufmann, H.; Mahajan, P.; Melz, T.; Özel, M.; Pouriayevali, H.; Reising, J.; Schäfer, S.; Tijani, Y.; Tomasella, A.; Xu, B.-X.
Book Article
2017Connected testing of electric powertrains
Schyr, Christian; Stelter, Eva; Sültrop, Christian
Conference Paper
2017Consistent approach to describe and evaluate uncertainty in vibration attenuation using resonant piezoelectric shunting and tuned mass dampers
Götz, Benedict; Platz, Roland; Melz, T.
Journal Article
2017Cyclic Material Behavior of High-Strength Steels Used in the Fatigue Assessment of Welded Crane Structures with a Special Focus on Transient Material Effects
Möller, B.; Tomasella, A.; Wagener, R.; Melz, T.
Journal Article
2017Deriving a continuous fatigue life curve from LCF to VHCF
Wagener, R.; Melz, T.
Report
2017Description and evaluation of uncertainty in the early development phase of a beam-column system subjected to passive and active buckling control
Mallapur, S.; Platz, Roland
Conference Paper
2017Design of functionally graded joints using a polyurethane-based adhesive with varying amounts of acrylate
Stapleton, S.E.; Weimer, J.; Spengler, J.
Journal Article
2017Development and experimental verification of a corrosion fatigue assessment method for highly-stressed engine components in E85 biofuel
Käfer, S.; Melz, T.; Kaufmann, H.; Engler, C.T.; Anderson, G.; Oechsner, M.
Conference Paper
2017Development of a multiaxial test environment for highly dynamically loaded mechatronic components
Vrbata, J.; Atzrodt, H.; Kimpel, T.; Koch, T.; Mayer, D.
Conference Paper
2017Effect of Graphite Nanoplate Morphology on the Dispersion and Physical Properties of Polycarbonate Based Composites
Müller, M.T.; Hilarius, K.; Liebscher, M.; Lellinger, D.; Alig, I.; Pötschke, P.
Journal Article
2017Einfluss der Gusshaut auf das Schwingfestigkeitsverhalten von Gusseisen mit Kugelgraphit
Schönborn, Steffen; Melz, Tobias
Conference Paper
2017Electrochemical characterization of automotive aluminum alloys regarding their corrosion fatigue behavior
Engeler, T.; Araújo, Francisco; Andersohn, G.; Kaufmann, Heinz; Melz, Tobias; Oechsner, M.
Conference Paper
2017Enhance lightweight design by composites - results of the EU project ENLIGHT
Mayer, Dirk; Bein, Thilo; Buff, Hendrik; Götz, Benedict; Schwarzhaupt, Oliver; Spancken, Dominik
Conference Paper
2017Environmental stress cracking of polyethylene high density (PE-HD) induced by liquid media - validation and verification of the full-notch creep test (FNCT)
Schilling, M.; Böhning, M.; Oehler, Harald; Alig, Ingo; Niebergall, U.
Journal Article
2017Evaluation of the Influence of MnS in Forged Steel 38MnVS6 on Fatigue Life
Scurria, M.; Emre, S.; Möller, B.; Wagener, R.; Melz, T.
Journal Article
2017Experimental results and fatigue life evaluation of magnesium laserbeam-welded joints under proportional and non-proportional multiaxial fatigue loading with variable amplitudes
Bolchoun, A.; Sonsino, C.M.; Kaufmann, H.; Melz, T.
Journal Article
2017Fatigue Assessment of Nodular Cast Iron with Material Imperfections
Bleicher, C.; Wagener, R.; Kaufmann, H.; Melz, T.
Journal Article
2017Fatigue assessment of PM components considering the highly stressed volume approach and mechanical properties
Haberlick, Etienne; Lipp, Klaus
Journal Article
2017Fatigue assessment of thick-walled nodular cast iron with regard to highly loaded machine structures using the strainlife approach
Hesseler, Jan; Bleicher, Christoph; Baumgartner, Jörg; Schnabel, Kai; Wagener, Rainer; Kaufmann, Heinz; Melz, Tobias
Conference Paper
2017Fatigue assessment with special respect to size effects and material behavior within local strain-based approaches
Hell, M.; Wagener, R.; Kaufmann, H.; Melz, T.
Report
2017Fatigue lifetime assessment of aluminium alloys for chassis components under corrosive environments
Araújo, Francisco; Engler, T.; Kaufmann, Heinz; Schönborn, Steffen; Andersohn, G.; Melz, Tobias; Oechsner, M.
Conference Paper
2017Fatigue performance of additive manufactured TiAl6V4 using electron and laser beam melting
Greitemeier, D.; Palm, F.; Syassen, F.; Melz, T.
Journal Article
2017Fatigue strength assessment of laser welded thin-walled joints made of mild and high strength steel
Marulo, G.; Baumgartner, Jörg; Frendo, F.
Journal Article
2017Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit. Jahresbericht 2016
 
Annual Report
2017Funktionsintegrierter Leichtbauquerlenker
Töws, Paul; Spancken, Dominik; Schwarzhaupt, Oliver; Herkenrath, Mavie; Büter, Andreas
Conference Paper
2017Generalized strength criteria as functions of the stress angle
Kolupaev, Vladimir, A.
Journal Article
2017Global load path adaption in a simple kinematic load-bearing structure to compensate uncertainty of misalignment due to changing stiness conditions of the structure's supports
Gehb, Christopher; Platz, Roland; Melz, Tobias
Conference Paper
2017Herleitung von Modellgesetzen schwingender Strukturen mittels Sensitivitätsanalyse am Beispiel einer gelenkig gelagerten Rechteckplatte
Adams, Christian; Bös, Joachim; Melz, Tobias
Conference Paper
2017Hochfrequenzprüfstände für die Charakterisierung von Aggregatlagern
Fiebig, N.; Schmidt, Matthias
Conference Paper
2017Hybride Leichtbauhinterachse für Elektrofahrzeuge
Becker, Paul; Büter, Andreas
Journal Article
2017Industrial IoT: Potentiale für die dezentrale Schwingungsdiagnose
Kloepfer, Jannes; Koch, Michael; Bartel, Torsten; Friedmann, A.
Conference Paper
2017Influence of different load histories on the cyclic material behavior of nodular cast iron for thick-walled application
Bleicher, Christoph; Wagener, Rainer; Kaufmann, Heinz; Melz, Tobias
Conference Paper
2017Insulating sandwich housing structures for the thermal management of battery packs
Weidmann, F.
Conference Paper
2017Interpenetrating polymer networks formed by cyanate esters and phenylethynyl-terminated imides
Meier, C.; Parlevliet, P.P.; Döring, M.
Journal Article
2017Kopplung von zyklischen Betriebsfestigkeitsuntersuchungen und Materialcharakterisierung zur Untersuchung der Elastomeralterung
Kroth, T.; Lellinger, D.; Alig, Ingo; Wallmichrath, Marc
Journal Article
2017Lasertechnik für den Leichtbau - Materialhybride aus Kunststoff und Metall
Spancken, Dominik; Straeten, K. van der; Beck, J.; Hofmann, S.; Büter, Andreas
Conference Paper
2017Lateral vibration attenuation of a beam with piezo-elastic supports subject to varying axial tensile and compressive loads
Götz, Benedict; Platz, Roland; Melz, Tobias
Conference Paper
2017Leichtbau mit Sandwichstrukturen. Sandwichstruktur mit integrierter thermischer Funktion
Geiling, M.; Schwarzhaupt, O.; Asins, C.C.
Journal Article
2017Lignin a sustainable and renewable flame retardant for abs
Bourbigot, S.; Fontaine, G.; Prieur, B.; Wittemann, M.; Klein, R.
Conference Paper
2017Linear Parameter-Varying (LPV) buckling control of an imperfect beam-column subject to time-varying axial loads
Schäffner, Maximilian; Platz, Roland
Conference Paper
2017Longtime monitoring with smart sensor networks: The case of the Zwartewaterbrug
Siebel, T.; Friedmann, A.; Strobel, W.; Guse, M.; Hartmann, A.
Conference Paper
2017Low cycle fatigue life assessment of welded high-strength structural steels based on nominal and local design concepts
Möller, B.; Baumgartner, J.; Wagener, R.; Kaufmann, H.; Melz, T.
Journal Article
2017Low cycle fatigue of short fibre reinforced polyamides
Stötzner, Norbert; Büter, Andreas; Spancken, Dominik; Laveuve, Dominik
Conference Paper
2017Manufacturing Induced Properties
Ahmels, L.; Bott, A.-K.; Bruder, E.; Gibbels, M.; Gramlich, S.; Hansmann, M.; Karin, I.; Kohler, M.; Lipp, K.; Melz, T.; Müller, C.; Neufeld, D.; Niehuesbernd, J.; Roos, M.; Tomasella, A.; Ulbrich, S.; Wagener, R.; Walter, A.
Book Article
2017Messunsicherheit im Kundtschen Rohr
Grebel, Anja; Bös, Joachim; Melz, Tobias
Conference Paper
2017Die Methodik-Lücke geschlossen. Zuverlässigkeitsbewertung von Leistungselektronik
Nuffer, Jürgen; Pfeiffer, Thomas; Rauschenbach, Matthias; Holz, Johannes; Stoll, Georg
Journal Article
2017Modeling of moisture-induced stress in PMMA: A simple approach to consider sorption behavior in FEM
Geertz, Guru; Wieser, Jürgen; Alig, Ingo; Heinrich, Gert
Journal Article
2017Modellierung quellungsbedingter Spannungen in PMMA mittels FEM unter Berücksichtigung von Sorptionsisothermen
Geertz, Guru
: Heinrich, Gert (Berichterstatter); Rehahn, Matthias (Mitberichterstatter)
Dissertation
2017Modelling of contact interfaces using non-homogenous discrete elements to predict dynamical behaviour of assembled structures
Sharma, Anuj
: Melz, Tobias (Berichterstatter); Schweizer, Bernhard (Mitberichterstatter)
Dissertation
2017Multi axial fatigue design of laser welded plastic parts
Spancken, Dominik; Laveuve, Dominik; Büter, Andreas; Henning, Frank
Conference Paper
2017Multiaxial fatigue assessment for automotive safety components of cast aluminium EN AC-42000 T6 (G-AlSi7Mg0.3 T6) under constant and variable amplitude loading
Sonsino, Cetin Morris; Franz, Roland
Journal Article
2017Multiaxial vibration testing of inertia force related components of ev
Debes, Christian; Zinke, Rüdiger; Dautfest, Alexander; Karthikeyan, Ashwin; Melz, Tobias
Conference Paper
2017Multifunctional load carrying lightweight structures for space design
Schubert, M.; Perfetto, Sara; Dafnis, A.; Mayer, Dirk; Atzrodt, Heiko; Schröder, K.-U.
Conference Paper
2017A new method for fatigue life evaluation under out-of-phase variable amplitude loadings and its application to thin-walled magnesium welds
Bolchoun, A.; Baumgartner, J.; Kaufmann, H.
Journal Article
2017Non-destructive characterization of fiber orientation in reinforced SMC as input for simulation based design
Schladitz, Katja; Büter, Andreas; Godehardt, Michael; Wirjadi, Oliver; Fleckenstein, Johanna; Gerster, Tobias; Hassler, Ulf; Jaschek, Katrin; Maisl, Michael; Maisl, Ute; Mohr, Stefan; Netzelmann, Udo; Potyra, Tobias; Steinhauser, Martin O.
Journal Article
2017Non-probabilistic uncertainty evaluation in the concept phase for airplane landing gear design
Platz, Roland; Götz, Benedict
Conference Paper
2017Nucleation efficiency of fillers in polymer crystallization studied by fast scanning calorimetry: Carbon nanotubes in polypropylene
Schawe, J.E.K.; Pötschke, P.; Alig, I.
Journal Article
2017Numerische Schwingfestigkeitsanalyse von Widerstandspunktschweißungen
Lohse, Sebastian
: Melz, Tobias (Gutachter); Oechsner, Matthias (Gutachter)
Dissertation
2017Observations by evaluating the uncertainty of stress distribution in truss structures based on probabilistic and possibilistic methods
Li, Sushan; Platz, Roland
Journal Article
2017Optimal placement of six inertial mass actuators for MIMO active vibration control on a laboratory truss structure
Lapiccirella, Giovanni; Rohlfing, Jens; Tehrani, M.G.
Conference Paper
2017Performance and power consumption of a decentralized velocity feedback control system with six inertial mass actuators on a laboratory truss structure
Lapiccirella, Giovanni; Rohlfing, Jens
Conference Paper
2017Phase behavior of mixtures - High-throughput small angle light scattering for rapid determination of phase behavior of multicomponent systems
Steinhoff, Bernd; Philipp, Katrin; Alig, Ingo; Matmour, Rachid; Dronet, Severin
Journal Article
2017Phosphorylation of lignin: Characterization and investigation of the thermal decomposition
Prieur, B.; Meub, M.; Wittemann, M.; Klein, R.; Bellayer, S.; Fontaine, G.; Bourbigot, S.
Journal Article
2017Physikalische Modellbildung für das Additive Sintern von Kunststoffmaterialien
Wohlgemuth, Florian; Alig, Ingo
Book Article
2017Piezoresistive Silicon Stress Sensor As a Tool to Monitor Health of an Electronic System
Palczynska, A.; Prisacaru, A.; Gromala, P.; Han, B.; Mayer, D.; Melz, T.
Conference Paper
2017Polybenzimidazole-based block copolymers: From monomers to membrane electrode assemblies for high temperature polymer electrolyte membrane fuel cells
Schönberger, F.; Qian, G.; Benicewicz, B.C.
Journal Article
2017Quantification and evaluation of uncertainty in the mathematical modelling of a suspension strut using Bayesian model validation approach
Mallapur, S.; Platz, Roland
Conference Paper
2017Remote mechanical vibration sensing: A comparison between CW-doppler radar and laser-doppler vibrometer measurements
Shrestha, A.; Kumar, R.; Dornuf, F.; Moll, J.; Krozer, V.; Schmidt, Matthias
Conference Paper
2017The Result: A New Design Paradigm
Roos, M.; Abedini, S.; Abele, E.; Albrecht, K.; Anderl, R.; Gibbels, M.; Gramlich, S.; Groche, P.; Horn, B.; Hoßfeld, A.; Köhler, S.; Lüthen, H.; Mattmann, I.; Melz, T.; Monnerjahn, V.; Müller, C.; Neuwirth, M.; Niehuesbernd, J.; Özel, M.; Pfetsch, M.; Reising, J.; Schäfer, S.; Schmidt, S.; Turan, E.; Ulbrich, S.; Wagner, C.; Walter, A.; Martins, T.W.; Zimmermann, A.
Book Article
2017Review and considerations on the fatigue assessment of welded joints using reference radii
Baumgartner, J.
Journal Article
2017Schwingungsrisskorrosionsverhalten von Stählen in biogenen Kraftstoffen
Käfer, Sven; Melz, Tobias
Conference Paper
2017Selective chromatographic separation of polycarbonate according to hydroxyl end-groups using a porous graphitic carbon column
Apel, Nico; Uliyanchenko, E.; Moyses, S.; Rommens, S.; Wold, C.; Macko, Tibor; Rode, Karsten; Brüll, Robert
Journal Article
2017Simulation of the scenario of the biaxial wheel fatigue test
Santiciolli, F.M.; Möller, R.; Krause, I.; Dedini, F.G.
Journal Article
2017Single-source macroporous hybrid materials by melt-shear organization of core-shell particles
Vowinkel, S.; Malz, F.; Rode, K.; Gallei, M.
Journal Article
2017Structural intensity research at TU Darmstadt
Bös, Joachim; Melz, Tobias
Conference Paper
2017Synthesis of a new phosphorylated ethylamine, thereon based phosphonamidates and their application as flame retardants
Garth, Kim; Klinkowski, Christoph; Fuhr, Olaf; Döring, Manfred
Journal Article
2017Testing and evaluation of a suspension arm with integrated functions
Spancken, Dominik; Büter, Andreas; Töws, Paul; Schwarzhaupt, Oliver
Journal Article
2017Thermische Alterung und Eigenschaften von Polymermaterialien für das Selektive Lasersintern
Schubert, Konrad; Kolb, Johannes; Wohlgemuth, Florian; Lellinger, Dirk; Alig, Ingo
Book Article
2017Towards prognostics and health monitoring: The potential of fault detection by piezoresistive silicon stress sensor
Palczynska, A.; Prisacaru, A.; Gromala, P.J.; Han, B.T.; Mayer, D.; Melz, T.
Journal Article, Conference Paper
2017Use of magnetic bearings in vibration control of a steam turbine with oil-film bearings
Pilotto, Rafael; Nordmann, Rainer; Atzrodt, Heiko; Herold, Sven
Conference Paper
2017Verbundprojekt Systemforschung Elektromobilität
Horch, Felix; Busse, Matthias
Book Article
2017Versagensverhalten von Mischschweißverbindungen unter mehrachsiger crashartiger und schwingender Beanspruchung am Beispiel von EMPT-Blechschweißungen. Schlussbericht
Huberth, F.; Baumgartner, J.
Report
2017Viscoelastic modelling of gas pore collapse during during polymer sintering
Wohlgemuth, Florian; Alig, Ingo
Conference Paper
2017Viscoelastic modelling of gas pore collapse during polymer sintering
Wohlgemuth, F.; Alig, I.
Conference Paper
2017Vorrichtung und Verfahren zur Beeinflussung einer dynamischen Eigenschaft wenigstens eines beweglich gelagerten Körpers sowie deren Verwendung als variabel einstellbares Dämpfungselement
Hansmann, Jan; Wolter, Stefan; Seipel, Björn; Kaal, William; Herold, Sven
Patent
2017Wie wirksam sind Haftvermittler?
Brüll, Robert
Journal Article
2017Witterungsbedingte Lackschäden früher erkennen
Alig, Ingo; Oehler, Harald; Wanner, Matthias
Journal Article
2016Ableitung eines vereinfachten Ersatzversuchs für PKW-Integralträger mittels numerischer Schädigungsbewertungen
Landersheim, Volker; Möller, Ricardo; Dittmann, K.-J.
Conference Paper
2016Active buckling control of a beam-column with circular cross-section using piezo-elastic supports and integral LQR control
Schäffner, Maximilian; Götz, Benedict; Platz, Roland
Journal Article
2016Active buckling control of an imperfect beam-column with circular cross-section using piezo-elastic supports and integral LQR control
Schäffner, Maximilian; Platz, Roland
Conference Paper
2016Active load path adaption in a simple kinematic load-bearing structure due to stiffness change in the structure's supports
Gehb, C.M.; Platz, Roland; Melz, Tobias
Conference Paper
2016Adaptive piezoelectric absorber for active vibration control
Herold, S.; Mayer, D.
Journal Article
2016Additive manufacturing of active struts for piezoelectric shunt damping
Mayer, Dirk; Stoffregen, Hanns Alexander; Heuss, Oliver; Pöllmann, Jennifer; Thiel, Jennifer; Abele, Eberhard; Melz, Tobias
Journal Article, Conference Paper
2016Advanced polyimide based composites for improved processing
Meier, C.; Parlevliet, P.P.; Doering, M.
Conference Paper
2016Analysis of different fatigue damage accumulation theories and damage parameters based on experiments with the steel HC340LA
Palma, V. de; Tomasella, A.; Frendo, F.; Melz, T.; Sonsino, C.M.
Journal Article
2016Anwendung stochastischer Simulationstechniken an smarten Systemen mit reduziertem Simulationsaufwand
Li, Sushan; Ochs, Steffen; Slomski, Elena M.; Melz, Tobias
Conference Paper
2016Approach to evaluate and to compare basic structural design concepts of landing gears in early stage of development under uncertainty
Platz, Roland; Götz, Benedict; Melz, Tobias
Conference Paper
2016Batterieentwicklung. Kosten sparen mit multiphysikalischen Prüfverfahren
Debes, Christian
Journal Article
2016Beitrag zur Bemessung von zyklisch beanspruchten Bauteilen aus Sphärogusswerkstoffen
Schönborn, Steffen; Kaufmann, Heinz; Melz, Tobias; Sonsino, Cetin Morris
Conference Paper
2016Beitrag zur Bemessung von zyklisch innendruckbeanspruchten Bauteilen aus Gusseisenwerkstoffen mit Kerbgrundkonzepten
Schönborn, Steffen
Journal Article
2016Ein Beitrag zur Beurteilung der Schwingfestigkeit von Großgussbauteilen aus Gusseisen mit Kugelgrafit mit besonderer Berücksichtigung der Auswirkungen von Lunkern auf die Bauteillebensdauer
Bleicher, Christoph
Journal Article
2016Ein Beitrag zur Beurteilung der Schwingfestigkeit von Großgussbauteilen aus Gusseisen mit Kugelgraphit mit besonderer Berücksichtigung der Auswirkungen von Lunkern auf die Bauteillebensdauer
Bleicher, Christoph G.H.
: Melz, Tobias (Berichterstatter); Sonsino, Cetin Morris (Mitberichterstatter); Oechsner, Matthias (Mitberichterstatter)
Dissertation
2016Block copolymers combine the best of both worlds
Klein, R.; Burlon, K.
Journal Article
2016Blockcopolymere wagen den Spagat
Klein, Roland; Burlon, Konrad
Journal Article
2016Compact electret energy harvester with high power output
Pondrom, P.; Sessler, G.M.; Bös, J.; Melz, Tobias
Journal Article
2016Description of transient material behaviour under constant and variable amplitude loading for cold formed steels by linear flow splitting
Tomasella, Alessio
: Melz, Tobias (Berichterstatter); Sonsino, Cetin Morris (Mitberichterstatter); Groche, Peter (Mitberichterstatter)
Dissertation
2016Detection of energy sinks and sources in the active vibratory energy field of coupled structures and systems with fluid-structure interaction
Groba, Peter; Ebert, J.; Stoewer, Torsten; Schaal, Clarissa; Bös, Joachim; Melz, Tobias
Conference Paper
2016Development of a structural health and load monitoring system and its implementation into an aircraft flying demonstrator
Lilov, Mihail; Siebel, Thomas; Contell Asins, Conchin; Schwarzhaupt, Oliver; Carli, Valerio
Conference Paper
2016Development of adaptive methods for the reduced noise transmission through a symmetric double-glazed window
Klaus, T.B.; Herold, S.; Heuss, O.; Melz, T.
Journal Article
2016Durability simulation with chassis control systems
Brandes, S.; Hilf, K.-D.; Möller, R.; Melz, T.
Journal Article
2016Duromere mit dem Laser sprengen
Malz, Frank
Journal Article
2016Effect of surface roughness on fatigue performance of additive manufactured Ti–6Al–4V
Greitemeier, D.; Dalle Donne, C.; Syassen, F.; Eufinger, J.; Melz, T.
Journal Article
2016Effiziente Validierung stochastischer Sensitivitätsanalysen an smarten Systemen
Ochs, Steffen; Li, Sushan; Slomski, Elena M.; Melz, Tobias
Conference Paper
2016Elektret- und Piezoelektret-Energy-Harvester
Pondrom, Perceval; Hillenbrand, Joachim; Zhang, Xiaoqing; Sessler, Gerd M.; Bös, Joachim; Melz, Tobias
Conference Paper
2016Elektroantrieb ohne Reichweitenprobleme: Generatorelektrisches Versuchsfahrzeug
Heim, Rüdiger
Journal Article
2016Enhanced lightweight design - first results of the FP7 Project ENLIGHT
Bein, T.; Mayer, D.; Hagebeuker, L.; Bachinger, A.; Bassan, D.; Pluymers, B.; Delogu, M.
Journal Article, Conference Paper
2016Enhancement of the fatigue strength assessment of welded components by consideration of mean and residual stresses in the crack initiation and propagation phases
Baumgartner, Jörg
Journal Article
2016Entstehung von zwei Wolftönen im Cello und die Möglichkeit zu deren aktiver Minderung
Neubauer, Philipp; Bös, Joachim; Melz, Tobias
Conference Paper
2016Estimation of critical conditions of polymers based on monitoring the polymer recovery
Bhati, Sampat Singh; Macko, Tibor; Brüll, Robert
Journal Article
2016Evaluation of uncertainty in experimental active buckling control of a slender beam-column with disturbance forces using Weibull analysis
Enß, G.C.; Platz, Roland
Journal Article
2016Experimental Studies on Different Actuator-Sensor Configurations of Active Control Systems for the Reduction of Noise and Vibration in Vehicles
Millitzer, J.; Mayer, D.; Kraus, R.; Schmidt, M.
Journal Article
2016Faserverbund-Sandwichbauteile für die Großserie
Weidmann, Felix; Graupner, Nico-Benedict; Wieser, Jürgen
Journal Article
2016Fatigue life assessment of thin-walled welded joints under non-proportional load-time histories by the shear stress rate integral approach
Bolchoun, Alexandre; Sonsino, Cetin Morris; Kaufmann, Heinz; Melz, Tobias
Journal Article
2016Fatigue strength of brazed components considering the influence of brazing quality, mean stresses and loading type
Baumgartner, Jörg; Tillmann, W.; Bobzin, K.; Wojarski, L.; Öte, M.; Manka, M.; Wiesner, S.; Sievers, N.
Conference Paper
2016Fitting of the strength hypotheses
Kolupaev, V.A.; Yu, M.-H.; Altenbach, H.
Journal Article
2016Flame retardancy of polymers: The role of specific reactions in the condensed phase
Schartel, Bernhard; Perret, Birgit; Dittrich, B.; Ciesielski, Michael; Krämer, J.; Müller, P.; Altstädt, V.; Zang, L.; Döring, Manfred
Journal Article
2016Flame retardant epoxy resins and composites
Döring, M.
Conference Paper
2016A flame retardant synergism of organic disulfides and phosphorous compounds
Wagner, Jochen; Deglmann, Peter; Fuchs, Sabine; Ciesielski, Michael; Fleckenstein, Christoph A.; Döring, Manfred
Journal Article
2016Flame Retardants for Polyethylene
Pfaendner, R.
Book Article
2016Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit. Jahresbericht 2015
 
Annual Report
2016Früherkennung von witterungsbedingten Lackschäden
Alig, Ingo; Hilt, M.
Book Article
2016Gas loss of insulating glass units under load
Knorr, M.D.; Wieser, J.; Geertz, G.; Buddenberg, S.; Oechsner, M.; Wittwer, W.
Journal Article
2016GaßnerWind - Bemessung von Eisengussbauteilen für Windenergieanlagen unter Berücksichtigung von Betriebsbelastung und Sonderereignissen
Bleicher, Christoph
Journal Article
2016Generalized limit surfaces - with an example of hard foams
Fahlbusch, Nina-Carolin; Becker, Wilfried; Kolupaev, Vladimir
Book Article
2016Homogenization of elastic properties of short-fiber reinforced composites based on measured microstructure data
Müller, V.; Brylka, B.; Dillenberger, F.; Glockner, R.; Kolling, S.; Böhlke, T.
Journal Article
2016Impact of damping factor on the effectiveness of an energy harvesting vibration absorber
Perfetto, S.; Infante, F.; Mayer, D.; Herold, S.
Conference Paper
2016In-situ investigation of EMC relaxation behavior using piezoresistive stress sensor
Palczynska, A.; Gromala, P.J.; Mayer, D.; Han, B.; Melz, T.
Journal Article
2016Inäquidistante Verzahnung zur Verringerung der Lästigkeit von Zahneingriffsgeräuschen
Neubauer, Philipp; Bös, Joachim; Melz, Tobias
Conference Paper
2016Inequidistant gearing used to reduce gear noise
Neubauer, Philipp; Bös, Joachim; Melz, Tobias
Conference Paper
2016Influence of membrane type and molecular weight distribution on the degradation of PBI-based HTPEM fuel cells
Ossiander, T.; Perchthaler, M.; Heinzl, C.; Schönberger, F.; Völk, P.; Welsch, M.; Chromik, A.; Hacker, V.; Scheu, C.
Journal Article
2016Innovation through the focused interlinking of research and application
Wiedemann, M.; Melz, T.
Abstract
2016Investigating the morphological variations due to processing and thermomechanical treatment of poly(propylene) using raman microscopy
Sanoria, A.; Damodaran, S.; Schuster, T.; Brüll, R.
Journal Article
2016Konzept zur temperaturabhängigen Lebensdauerabschätzung von Elastomerbauteilen
Kroth, T.; Möller, R.; Melz, T.; Dippel, B.; Lion, A.
Journal Article
2016Lateral vibration attenuation of a beam with circular cross-section by a support with integrated piezoelectric transducers shunted to negative capacitances
Götz, Benedict; Schäffner, Maximilian; Platz, Roland; Melz, Tobias
Journal Article
2016Leichtbauanforderungen bei Großgusskomponenten
Bleicher, C.
Journal Article
2016Lightweight design with welded high-frequency mechanical impact (HFMI) treated high-strength steel joints from S700 under constant and variable amplitude loadings
Yíldírím, H.C.; Marquis, G.; Sonsino, C.M.
Journal Article
2016Lightweight-structural durability design by consideration of variable amplitude loading
Sonsino, Cetin Morris; Heim, Rüdiger; Melz, T.
Journal Article
2016Lufthärtender duktiler Stahl mit mittlerem Mangangehalt für die Massivumformung
Stieben, Andreas; Bleck, Wolfgang; Schönborn, Steffen
Journal Article
2016Makroskopische Anrissüberwachung
Spancken, Dominik; Baumgartner, Jörg
Journal Article
2016Maschinenakustik und Psychoakustik: Analyse von Getriebegeräuschen
Bös, Joachim; Moritz, Karsten; Schlittenlacher, Josef; Ellermeier, Wolfgang; Melz, Tobias
Conference Paper
2016Measurement of the spatial sound propagation with a low-cost sound intensity scanner
Klaus, T.B.; Schmidt, M.; Herold, S.
Conference Paper
2016Methode zur akustischen Gestaltung einer Permanentmagnet-Synchronmaschine auf Basis der Strukturintensität
Adams, Christian; Schaal, Clarissa; Bös, Joachim; Melz, Tobias
Conference Paper
2016Modellbasierte Fehlerdiagnoseverfahren zur Validierung von Simulationsmodellen dynamischer Systeme
Haffke, Björn
: Strackeljan, Jens (Gutachter); Melz, Tobias (Gutachter)
Dissertation
2016Modelling cumulative effects of dry contact and laminate structure on dynamical behavior of the assembled structures
Sharma, Anuj; Mueller-Hirsch, Wolfgang; Herold, Sven; Melz, Tobias
Journal Article, Conference Paper
2016Multi physical domain simulation of a NVH reduction system for a generator-electric vehicle
Tamm, C.; Bartel, T.; Dautfest, A.; Debes, C.; Herold, S.; Dsoki, C. el
Conference Paper
2016Multiaxial fatigue of cast aluminium EN AC-42000 T6 (G-AlSi7Mg0.3 T6) for automotive safety components under constant and variable amplitude loading
Sonsino, C.M.; Franz, R.
Journal Article
2016Multiaxial loading of thermoplastic laser welds
Spancken, Dominik; Wacker, J.-D.; Büter, Andreas; Melz, Tobias
Journal Article
2016New developments in flame-retardant polystyrene foam
Doering, M.
Abstract
2016New injection moulding process
Weidmann, F.
Journal Article
2016Nonlinear material behaviour and failure of closed-cell polymer foams
Fahlbusch, Nina-Carolin; Becker, Wilfried; Kolupaev, Vladimir; Geertz, Guru
Journal Article
2016Nonparametric Quantile Estimation Based on Surrogate Models
Enß, Georg Christoph; Kohler, M.; Krzyzak, A.; Platz, Roland
Journal Article
2016Notwendigkeit der intensiven Analyse des bauteilgebundenen Werkstoffverhaltens von Kupfer-Legierungen
Loos, D.; Barti, E.; Wagener, R.; Melz, T.
Journal Article
2016Numerische Untersuchungen zur akustischen Wirkung diskreter Strukturänderungen mittels der Strukturintensität
Schaal, Clarissa; Ebert, Johannes; Adams, Christian; Bös, Joachim; Melz, Tobias
Conference Paper
2016Optimization of a tuned vibration absorber in a multibody system by operational analysis
Infante, F.; Perfetto, S.; Mayer, D.; Herold, S.
Conference Paper
2016Passivation and reactivation of catalyst systems for the single step synthesis of dimethyl ether from CO-rich synthesis gas
Ahmad, R.; Arnold, U.; Deutsch, D.; Döring, M.; Sauer, J.
Journal Article
2016Performance and constraints of an active vibration control system with electrodynamic inertial mass actuators
Lapiccirella, Giovanni; Rohlfing, Jens; Mayer, Dirk
Conference Paper
2016Phosphorylation of lignin to flame retard acrylonitrile butadiene styrene (ABS)
Prieur, B.; Meub, M.; Wittemann, M.; Klein, Roland; Bellayer, S.; Fontaine, G.; Bourbigot, S.
Journal Article, Conference Paper
2016Polymerzusammensetzung mit verzögertem Kristallisationsverhalten, das Kristallisationsverhalten beeinflussende Additivzusammensetzung, Verfahren zur Herabsetzung des Kristallisationspunktes sowie Verwendung einer Additivzusammensetzung
Pfaendner, Rudolf; Groos, Benjamin
Patent
2016Polymerzusammensetzung mit verzögertem Kristallisationsverhalten, das Kristallisationsverhalten beeinflussende Additivzusammensetzung, Verfahren zur Herabsetzung des Kristallisationspunktes sowie Verwendung einer Additivzusammensetzung
Groos, Benjamin; Pfaendner, Rudolf
Patent
2016Power consumption and performance limit estimation of smart actuators for active vibration control
Lapiccirella, Giovanni; Rohlfing, Jens; Jungblut, Timo
Conference Paper
2016Preparation of Ethylene/1-Hexene copolymers from Ethylene using a fully silica-supported tandem catalyst system
Karbach, Fabian F.; Macko, Tibor; Duchateau, Robbert
Journal Article
2016Quantification of identical and unique segments in ethylene-propylene copolymers using two dimensional liquid chromatography with infra-red detection
Bhati, Sampat Singh; Macko, Tibor; Brüll, Robert
Journal Article
2016A scaling method for vibrating structures using global sensitivity analysis
Adams, Christian; Bös, Joachim; Melz, Tobias
Conference Paper
2016Schwingfestigkeitsbeurteilung dickwandiger Komponenten aus Gusseisen mit Kugelgraphit unter besonderer Berücksichtigung der Auswirkungen von Lunkern
Bleicher, Christoph; Wagener, Rainer; Melz, Tobias; Kaufmann, Heinz
Conference Paper
2016Schwingfestigkeitsverhalten von Kupfer-Legierungen für die Anwendung in mobilen Steuergeräten
Wagener, R.; Scurria, M.; Kimpel, T.; Haouel, M.; Kaufmann, H.; Melz, T.
Journal Article
2016Self-tuning velocity feedback control for a time varying structure using a voltage driven electrodynamic inertial mass actuator
Rohlfing, Jens; May, Thomas; Walter, L.; Millitzer, Jonathan
Conference Paper
2016Separation of maleic anhydride grafted polypropylene using multidimensional high-temperature liquid chromatography
Prabhu, K.N.; Macko, T.; Brüll, R.; Remerie, K.; Tacx, J.; Garg, P.; Ginzburg, A.
Journal Article
2016Simulation driven design of novel integrated circuits - physics of failure simulation of the electronic control modules for harsh environment application
Palczynska, Alicja; Sasi, Arun; Werner, Matthias; Prisacaru, Alexandru; Gromala, Przemyslaw; Han, Bongtae; Mayer, Dirk; Melz, Tobias
Conference Paper
2016Simulationsgestützte Konfiguration von piezoelektrischen Energy-Harvesting-Generatoren für die Versorgung von energieautarken Sensoren im Schienengüterverkehr und anderen Anwendungen
Koch, Michael; Kaal, William; Mayer, Dirk
Conference Paper
2016A study of the electric circuit for a vibration energy harvesting absorber
Infante, F.; Perfetto, S.; Herold, S.; Mayer, D.
Conference Paper
2016Test rig with active damping control for the simultaneous evaluation of vibration control and energy harvesting via piezoelectric transducers
Perfetto, Sara; Rohlfing, Jens; Infante, Francesco; Mayer, Dirk; Herold, Sven
Conference Paper
2016Thermische Alterung und Eigenschaften von Polymermaterialien für das selektive Lasersintern
Schubert, Klaus; Kolb, J.; Wohlgemuth, F.; Lellinger, Dirk; Alig, Ingo
Conference Paper
2016Towards prognostics and health monitoring: The potential of fault detection by piezoresistive silicon stress sensor
Palczynska, Alicja; Prisacaru, Alexandru; Gromala, Przemyslaw Jakub; Han, Bongtae; Mayer, Dirk; Melz, Tobias
Conference Paper
2016Tuning of a vibration absorber with shunted piezoelectric transducers
Heuss, Oliver; Salloum, R.; Mayer, D.; Melz, Tobias
Journal Article
2016Uncertainty quantification for decision making in early design phase for passive and active vibration isolation
Platz, Roland; Melzer, C.
Conference Paper
2016Variable amplitude fatigue of high-strength cast iron alloys for automotive applications
Schoenborn, S.; Kaufmann, H.; Sonsino, C.M.; Heim, R.
Journal Article
2016Verwendung von phosphorhaltigen organischen Oxyimiden als Flammschutzmittel, Radikalgeneratoren und/oder als Stabilisatoren für Kunststoffe, flammgeschützte Kunststoffzusammensetzung, Verfahren zu deren Herstellung sowie Formteile, Lacke und Beschichtungen
Pfaendner, Rudolf; Mazurowski, Markus
Patent
2016Vibration control of a flexible rotor with oil-film bearings by means of active magnetic bearings
Pilotto, R.; Nordmann, R.; Jungblut, T.; Herold, S.
Conference Paper
2016Vibrations of Elliptically Shaped Bearings in Strain Wave Gearings
Adams, Christian; Skowronek, Adam; Bös, Joachim; Melz, Tobias
Journal Article
2016Viskoelastische Modellierung des Sinterns von Kunststoffmaterialien
Wohlgemuth, F.; Alig, Ingo
Conference Paper
2016Von System- zu Materialanforderungen
Nuffer, Jürgen; Rauschenbach, Matthias; Hesseler, Jan; Wagener, Rainer
Journal Article