Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2022Fabrication of four-level hierarchical topographies through the combination of LIPSS and direct laser interference pattering on near-beta titanium alloy
Schell, Frederic; Alamri, Sabri; Hariharan, Avinash; Gebert, Annett; Lasagni, Andrés-Fabián; Kunze, Tim
Journal Article
2021Accessing pore microstructure-property relationships for additively manufactured materials
Raßloff, Alexander; Schulz, Paul; Kühne, Robert; Ambati, Marreddy; Koch, Ilja; Zeuner, André Till; Gude, Maik; Zimmermann, Martina; Kästner, Markus
Journal Article
2021Acoustically induced vocal training for individuals with impaired hearing
Graf, Simone; Bungenstock, Anna; Richter, Lena; Unterhofer, Carmen; Gruner, Michael; Hartmann, Peter; Hoyer, Patrick
Journal Article
2021Additive manufacturing of β-NiAl by means of laser metal deposition of pre-alloyed and elemental powders
Müller, Michael; Heinen, Bastian; Riede, Mirko; Lopez, Elena; Brückner, Frank; Leyens, Christoph
Journal Article
2021Additive manufacturing of titanium with different surface structures for adhesive bonding and thermal direct joining with fiber-reinforced polyether-ether-ketone (PEEK) for lightweight design applications
Moritz, Juliane; Götze, Philipp; Schiefer, Tom; Stepien, Lukas; Klotzbach, Annett; Standfuß, Jens; Lopez, Elena; Brückner, Frank; Leyens, Christoph
Journal Article
2021Analysis and optimization of light outcoupling in OLEDs with external hierarchical textures
Kovacic, Milan; Samigullina, Dinara; Bouchard, Felix; Krc, Janez; Lipovsek, Benjamin; Soldera, Marcos; Lasagni, Andrés-Fabián; Reineke, Sebastian; Topic, Marko
Journal Article
2021Aspect ratio of nano/microstructures determines Staphylococcus aureus adhesion on PET and titanium surfaces
Meinshausen, Ann-Kathrin; Herbster, Maria; Zwahr, Christoph; Soldera, Marcos; Müller, Andreas; Halle, Thorsten; Lasagni, Andrés-Fabián; Bertrand, Jessica
Journal Article
2021Auf Gleitreibung beanspruchtes System
Kunze, Tim; Makowski, Stefan; Trautewig, Sophie
Patent
2021Boride-Carbon hybrid technology for ultra-wear and corrosive conditions
Baule, Nina; Kim, Young S.; Zeuner, André Till; Haubold, Lars; Kühne, Robert; Eryilmaz, Osman; Erdemir, Ali; Hu, Zhong; Zimmermann, Martina; Schülke, Thomas; Fan, Qi-Hua
Journal Article
2021Combined measurement and simulation of piston ring cylinder liner contacts with a reciprocating long-stroke tribometer
Michelberger, Björn; Jaitner, Dirk; Hagel, Andreas; Striemann, Patrick; Kröger, Benjamin; Leson, Andreas; Lasagni, Andrés-Fabián
Journal Article
2021Conditioning of hiPSC-derived cardiomyocytes using surface topography obtained with high throughput technology
Cortella, Lucas; Cestari, Idagene; Lahuerta, Ricardo; Arana, Matheus; Soldera, Marcos; Rank, Andreas; Lasagni, Andrés-Fabián; Cestari, Ismar Newton
Journal Article
2021Detection and analysis of photo-acoustic emission in Direct Laser Interference Patterning
Steege, Tobias; Alamri, Sabri; Lasagni, Andrés-Fabián; Kunze, Tim
Journal Article
2021Development of a system for additive manufacturing of ceramic matrix composite structures using laser technology
Polenz, Stefan; Kunz, Willy; Braun, Benjamin; Franke, Andrea; Lopez, Elena; Brückner, Frank; Leyens, Christoph
Journal Article
2021Direct laser interference patterning of diffraction gratings in safrofilcon - a hydrogel: Fabrication and hydration assessment
Sola, Daniel; Milles, Stephan; Lasagni, Andrés-Fabián
Journal Article
2021Effect of Energy and Temperature on Tetrahedral Amorphous Carbon Coatings Deposited by Filtered Laser-Arc
Kaulfuß, Frank; Weihnacht, Volker; Zawischa, Martin; Lorenz, Lars; Makowski, Stefan; Hofmann, Falko; Leson, Andreas
Journal Article
2021Elastische Kleb- und Vergusssysteme zur Ableitung elektrostatischer Ladungen
Leicht, Heinrich; Kraus, Eduard; Baudrit, Benjamin; Hochrein, Thomas; Bastian, Martin; Langer, Maurice
Report
2021Electron beam powder bed fusion of γ-Titanium aluminide: Effect of processing parameters on part density, surface characteristics, and aluminum content
Moritz, Juliane; Teschke, Mirko; Marquardt, Axel; Stepien, Lukas; Lopez, Elena; Brückner, Frank; Barrientos, Marina Macias; Walther, Frank; Leyens, Christoph
Journal Article
2021Enhancement of the adhesion of wire arc sprayed coatings on carbon fiber-reinforced plastic by surface laser structuring
Gustke, Kevin; Gebauer, Jana; Drehmann, Rico; Lasagni, Andrés-Fabián; Lampke, Thomas
Journal Article
2021Establishment of a resazurin-based aortic valve tissue viability assay for dynamic culture in a microphysiological system
Dittfeld, Claudia; Winkelkotte, Maximilian; Behrens, Stephan; Schmieder, Florian; Jannasch, Anett; Matschke, Klaus; Sonntag, Frank; Tugtekin, Sems-Malte
Journal Article
2021Extension of the process limits in laser beam welding of thick-walled components using the Laser Multi-Pass Narrow-Gap welding (Laser-MPNG) on the example of the nickel-based material Alloy 617 occ
Keßler, Benjamin; Dittrich, Dirk; Brenner, Berndt; Standfuß, Jens; Leyens, Christoph
Journal Article
2021Factorial analysis of fiber laser fusion cutting of AISI 304 stainless steel: Evaluation of effects on process performance, kerf geometry and cut edge roughness
Mahrle, Achim; Borkmann, Madlen; Pfohl, Peer
Journal Article
2021Flexible leitfähige Klebstoffe - Modifikation von flexiblen Klebstoffen und Vergussmassen mit Carbon Nanotubes am Beispiel von Silikonen
Leicht, Heinrich; Kraus, Eduard; Baudrit, Benjamin; Hochrein, Thomas; Bastian, Martin; Langer, Maurice; Klotzbach, Annett
Journal Article
2021Fraunhofer-Institut für Werkstoff- und Strahltechnik. Jahresbericht 2020/2021
 
Annual Report
2021From mine to part: Directed energy deposition of iron ore
Naesstroem, Himani; Brückner, Frank; Kaplan, Alexander F.H.
Journal Article
2021Functionalization of suspension sprayed HVOF TiO2 coatings by direct laser interference patterning
Toma, Filofteia-Laura; Alamri, Sabri; Leupolt, Beate; Kunze, Tim; Barbosa, Maria Manuel
Journal Article
2021Fundamental studies on the interaction of laser radiation and paper regarding a joining process without filler material
Lull, Florian; Zahel, Martin; Panzner, Michael; Schilling, T.
Conference Paper
2021Future E-Drive: Das e-Getriebe von morgen!
Bräunig, Jan; Lahl, Mike; Weihnacht, Volker
Journal Article
2021Generalized approach of scratch adhesion testing and failure classification for hard coatings using the concept of relative area of delamination and properly scaled indenters
Zawischa, Martin; Supian, Muhammad Muiz Azri Bin Mohamad; Makowski, Stefan; Schaller, Frank; Weihnacht, Volker
Journal Article
2021Hierarchical microtextures embossed on PET from laser-patterned stamps
Bouchard, Felix; Soldera, Marcos; Baumann, Robert; Lasagni, Andrés-Fabián
Journal Article
2021High-capacity reversible lithium storage in defined microporous carbon framework for all solid-state lithium batteries
Bloi, Luise Maria; Hippauf, Felix; Boenke, Tom; Rauche, Marcus; Paasch, Silvia; Schutjajew, Konstantin; Pampel, Jonas; Schwotzer, Friedrich; Dörfler, Susanne; Althues, Holger; Oschatz, Martin; Brunner, Eike; Kaskel, Stefan
Preprint
2021High-performing Li-Ion battery with "Two Cathodes in One" of sulfur and LiFePO4 by strategies of mitigation of polysulfide shuttling
Garay-Marín, Juan David; Quiroga-González, Enrique; Garza-Tovar, Lorena Leticia; Reuter, Florian; Kensy, Christian; Althues, Holger; Kaskel, Stefan
Journal Article
2021Human valvular interstitial cells cultured in a micro-physiological system - Impact of oxygen concentration adjusted by a chip implemented oxygenator
Dittfeld, Claudia; Schmieder, Florian; Salminger, Dominic; Behrens, Stephan; Jannasch, Anett; Plötze, Katrin; Matschke, Klaus; Sonntag, Frank; Tugtekin, Sems-Malte
Journal Article
2021Hybrid processing of bearing steel by combining direct laser interference patterning and laser hardening for wear resistance applications
El-Khoury, Mikhael; Seifert, Marko; Bretschneider, Sven; Zawischa, Martin; Steege, Tobias; Alamri, Sabri; Lasagni, Andrés-Fabián; Kunze, Tim
Journal Article
2021Icephobic performance of multi-scale laser-textured aluminum surfaces for aeronautic applications
Milles, Stephan; Vercillo, Vittorio; Alamri, Sabri; Aguilar Morales, Alfredo Ismael; Kunze, Tim; Bonaccurso, Elmar; Lasagni, Andrés-Fabián
Journal Article
2021Impact of carbon porosity on sulfur conversion in Li-S battery cathodes in a sparingly polysulfide solvating electrolyte
Kensy, Christian; Schwotzer, Friedrich; Dörfler, Susanne; Althues, Holger; Kaskel, Stefan
Journal Article
2021Impact of molten pool dynamics on resultant surface structures during direct laser interference patterning
Voisiat, Bogdan; Milles, Stephan; Lasagni, Andrés-Fabián
Journal Article
2021Improved corrosion behavior of a novel Fe85Cr4Mo8V2C1 tool steel processed by laser powder bed fusion
Kochta, Fabian; Gebert, Annett; Kühn, Uta; Oswald, Steffen; Gemming, Thomas; Leyens, Christoph; Hufenbach, Julia Kristin
Journal Article
2021Improved mounting of strain sensors by reactive bonding
Schumacher, Axel; Shah, Vraj; Steckemetz, Stefan; Dietrich, Georg; Pflug, Erik; Hehn, Thorsten; Knappmann, Stephan; Dehe, Alfons; Leson, Andreas
Journal Article
2021Improving and monitoring the magnetic pulse welding process between dissimilar metals
Bellmann, Jörg; Schettler, Sebastian; Schulze, Sebastian; Wagner, Markus; Standfuß, Jens; Zimmermann, Martina; Beyer, Eckhard; Leyens, Christoph
Journal Article
2021In situ observation with x-ray for tentative exploration of laser beam welding processes for aluminum-based alloys
Börner, Stephan; Dittrich, Dirk; Mohlau, Philipp; Leyens, Christoph; Garcia-Moreno, Francisco; Kamm, Paul Hans; Neu, Tillmann Robert; Schlepütz, Christian Matthias
Journal Article
2021Increasing the stability of LiMn2O4 against harsh conditions during lithium recovery from real brine solutions
Hippauf, Felix; Abendroth, Thomas; Neidhardt, Julia; Althues, Holger; Aljlil, Saad A.; Alrasheed, Radwan A.; Alyousef, Yousef M.; Kaskel, Stefan
Journal Article
2021Influence of copper interlayers on the magnetic pulse welding process between aluminum and steel
Bellmann, Jörg; Roder, Kristina; Zimmermann, Martina; Beyer, Eckhard; Kroll, Lothar; Nestler, Daisy Julia
Journal Article
2021Influence of sulphur content on structuring dynamics during nanosecond pulsed direct laser interference patterning
Jähnig, Theresa; Demuth, Cornelius; Lasagni, Andrés-Fabián
Journal Article
2021Integration of pure copper to optimize heat dissipation in injection mould inserts using laser metal deposition
Polenz, Stefan; Kolbe, Christian; Bittner, Florian; Lopez, Elena; Brückner, Frank; Leyens, Christoph
Journal Article
2021Label-free detection of C-Reactive protein using bioresponsive hydrogel-based surface relief diffraction gratings
Lucío, María Isabel; Montoto, Andy Hernández; Fernández, Estrella; Alamri, Sabri; Kunze, Tim; Bañuls, María-José; Maquieira, Ángel
Journal Article
2021Laser fusion cutting: Evaluation of gas boundary layer flow state, momentum and heat transfer
Borkman, Madlen; Mahrle, Achim; Beyer, Eckhard; Leyens, Christoph
Journal Article
2021Laserbasierte Oberflächenvorbehandlung zum stoffschlüssigen Fügen mittels Kleben von faserverstärkten thermoplastischen Kunststoffen und Leichtmetallen
Schiefer, Tom
Dissertation
2021Lithium metal anode: Processing and interface engineering
Kaskel, Stefan; Zhang, Qiang; Sun, Xueliang
Editorial
2021Mechanical and optical properties of as-grown and thermally annealed titanium dioxide from titanium tetrachloride and water by atomic layer deposition
Ylivaara, Oili M.E.; Langner, Andreas; Liu, Xuwen; Schneider, Dieter; Julin, Jaakko; Arstila, Kai; Sintonen, Sakari; Ali, Saima; Lipsanen, Harri; Sajavaara, Timo; Hannula, Simo-Pekka; Puurunen, Riikka L.
Journal Article
2021Melt spinning of highly stretchable, electrically conductive filament yarns
Probst, Henriette; Katzer, Konrad; Nocke, Andreas; Hickmann, Rico; Zimmermann, Martina; Cherif, Chokri
Journal Article
2021Metal additive manufacturing in aerospace: A review
Blakey-Milner, Bryce; Gradl, Paul; Snedden, Glen; Brooks, Michael; Pitot, Jean; Lopez, Elena; Leary, Martin; Berto, Filippo; Plessis, Anton du
Journal Article
2021Microfabrication and Surface Functionalization of Soda Lime Glass through Direct Laser Interference Patterning
Soldera, M.; Alamri, S.; Sürmann, P.A.; Kunze, T.; Lasagni, A.F.
Journal Article
2021Multimaterial additive manufacturing of graded laves phase reinforced NiAlTa structures by means of Laser Metal Deposition
Müller, Michael; Stellmacher, Andre; Riede, Mirko; Lopez, Elena; Brückner, Frank; Leyens, Christoph
Journal Article
2021Nanostructured Si-C composites as high-capacity anode material for all-solid-state lithium-ion batteries
Poetke, Stephanie; Hippauf, Felix; Baasner, Anne; Dörfler, Susanne; Althues, Holger; Kaskel, Stefan
Journal Article
2021Nanostructured Si-C Composites As High-Capacity Anode Material For All-Solid-State Lithium-Ion Batteries
Poetke, Stephanie; Hippauf, Felix; Baasner, Anne; Dörfler, Susanne; Althues, Holger; Kaskel, Stefan
Journal Article
2021A new zeolitic lithium aluminum imidazolate framework
Jiang, Guangshen; Bon, Volodymyr; Xu, Fei; Garai, Bikash; Zhang, En; Senkovska, Irena; Poetke, Stephanie; Hippauf, Felix; Hausdorf, Steffen; Paasch, Silvia; Brunner, Eike; Wang, Hongqiang; Kaskel, Stefan
Journal Article
2021PDMS free modular plug and play construction kit for the development of micro-physiological systems
Behrens, Stephan; Schmieder, Florian; Polk, Christoph; Schöps, Patrick; Sonntag, Frank
Conference Paper
2021Physical and geometrical properties of additively manufactured pure copper samples using a green laser source
Gruber, Samira; Stepien, Lukas; Lopez, Elena; Brückner, Frank; Leyens, Christoph
Journal Article
2021A process optimization strategy for texturing 3D surfaces using direct laser interference patterning
Kuisat, Florian; Rößler, Florian; Lasagni, Andrés-Fabián
Journal Article
2021Recent progress and emerging application areas for lithium-sulfur battery technology
Dörfler, Susanne; Walus, Sylwia; Locke, Jacob; Fotouhi, Abbas; Auger, Daniel J.; Shateri, Neda; Abendroth, Thomas; Härtel, Paul; Althues, Holger; Kaskel, Stefan
Journal Article
2021Rechargeable Al-ion batteries
Li, C.; Hou, C.-C.; Chen, L.; Kaskel, S.; Xu, Q.
Journal Article
2021The role of carbon electrodes pore size distribution on the formation of the cathode-electrolyte interphase in lithium-sulfur batteries
Kensy, Christian; Leistenschneider, Desirée; Wang, Shuwen; Tanaka, Hideki; Dörfler, Susanne; Kaneko, Katsumi; Kaskel, Stefan
Journal Article
2021The role of lubricant and carbon surface in achieving ultra- and superlow friction
Weihnacht, Volker; Makowski, Stefan
Book Article
2021Scanner-based direct laser interference patterning on stainless steel
Madelung, Aleksander; Alamri, Sabri; Steege, Tobias; Krupop, Benjamin; Lasagni, Andrés-Fabián; Kunze, Tim
Journal Article
2021Simultaneous micro-structuring and surface smoothing of additive manufactured parts using DLIP technique and its influence on the wetting behaviour
Kuisat, Florian; Ränke, Fabian; Lasagni, Fernando A.; Lasagni, Andrés-Fabián
Journal Article
2021Smoothing additive manufactured parts using ns-pulsed laser radiation
Kuisat, Florian; Lasagni, Fernando A.; Lasagni, Andrés-Fabián
Journal Article
2021Stabilizing effect of polysulfides on lithium metal anodes in sparingly solvating solvents
Reuter, Florian; Huang, Chen-Jui; Hsieh, Yi-Chen; Dörfler, Susanne; Brunklaus, Gunther; Althues, Holger; Winter, Martin; Lin, Shawn D.; Hwang, Bing-Joe; Kaskel, Stefan
Journal Article
2021Stable superhydrophobic aluminum surfaces based on laser-fabricated hierarchical textures
Milles, Stephan; Dahms, Johannes; Soldera, Marcos; Lasagni, Andrés-Fabián
Journal Article
2021A study on hot-working as alternative post-processing method for titanium aluminides built by laser powder bed fusion and electron beam melting
Sizova, Irina; Sviridov, Alexander; Bambach, Markus; Eisentraut, Mark; Hemes, Susanne; Hecht, Ulrike; Marquardt, Axel; Leyens, Christoph
Journal Article
2021Sulfur transfer melt infiltration for high-power carbon nanotube sheets in lithium-sulfur pouch cells
Boenke, Tom; Härtel, Paul; Dörfler, Susanne; Abendroth, Thomas; Schwotzer, Friedrich; Althues, Holger; Kaskel, Stefan
Journal Article
2021Surface conditioning of additively manufactured titanium implants and its influence on materials properties and in vitro biocompatibility
Bernhardt, Anne; Schneider, Jakob; Schröder, Andreas; Papadopoulous, Kiriaki; Lopez, Elena; Brückner, Frank; Botzenhart, Ute U.
Journal Article
2021Tailored absorptivity: Increasing the laser weldability of copper through surface structuring
Baumann, Robert; Hipp, Dominik; Lasagni, Andrés-Fabián; Mahrle, Achim
Journal Article
2021Tailored wetting of copper using precise nanosecond direct laser interference patterning
Baumann, Robert; Milles, Stephan; Leupolt, Beate; Kleber, Susann; Dahms, Johannes; Lasagni, Andrés-Fabián
Journal Article
2021Ultra-hydrophilic porous carbons and their supercapacitor performance using pure water as electrolyte
Huettner, Christiane; Xu, Fei; Paasch, Silvia; Kensy, Christian; Zhai, Yi Xuan; Yang, Jiaying; Brunner, Eike; Kaskel, Stefan
Journal Article
2021Understanding the changed mechanisms of laser beam fusion cutting by applying beam oscillation, based on thermographic analysis
Pinder, Thomas; Goppold, Cindy
Journal Article
2021Use of hyperspectral imaging for the quantification of organic contaminants on copper surfaces for electronic applications
Englert, Tim; Gruber, Florian; Stiedl, Jan; Green, Simon; Jacob, Timo; Rebner, Karsten; Grählert, Wulf
Journal Article
2021Verfahren zur Ausbildung einer mit ta-C gebildeten Schicht oder einer mit mindestens einer mit ta-C gebildeten Schicht gebildeten Beschichtung sowie damit ausgebildet ta-C-Schicht oder Beschichtung
Zawischa, Martin; Lorenz, Lars; Hofmann, Falko; Weihnacht, Volker; Makowski, Stefan; Kaulfuß, Frank
Patent
2021Verfahren zur Herstellung eines Verbundbauteils
Moritz, Juliane; Klotzbach, Udo; Moritz, Tassilo; Mosch, Sindy; Müller-Köhn, Axel
Patent
2021Verfahren zur Herstellung eines Verbundbauteils, das mit einem faserverstärktem Kunststoffbauteil, an dem mindestens eine Oberfläche mit einer Beschichtung ausgebildet ist, gebildet ist
Machulla, Manuel; Scheitz, Stefan
Patent
2021Vorrichtung zur Zuführung von drahtförmigem Werkstoff
Knechtel, Karsten; Kubisch, Frank; Wollenhaupt, Martin
Patent
2021Wear behavior analysis of Al2O3 coatings manufactured by APS and HVOF spraying processes using powder and suspension feedstocks
Michalak, Monika; Sokolowski, Pawel; Szala, Miroslaw; Walczak, Marius; Latka, Leszek; Toma, Filofteia-Laura; Björklund, Stefan
Journal Article
2021Wetting Properties of Aluminium Surface Structures Fabricated Using Direct Laser Interference Patterning with Picosecond and Femtosecond Pulses
Milles, S.; Dahms, J.; Voisiat, B.; Indrišiūnas, S.; Račiukaitis, G.; Lasagni, A.F.
Journal Article
2020AB-Versus AA+BB-Suzuki polycondensation: A palladium/Tris(tert‐butyl)phosphine catalyst can outperform conventional catalysts
Zhang, Kenan; Tkachov, Roman; Ditte, Kristina; Kiriy, Nataliya; Kiriy, Anton; Vot, Brigitte
Journal Article
2020Abscheidung nitridischer Hartstoffschichten auf der Basis von Hochentropielegierungen mit Hilfe des Arc-PVD-Verfahrens und deren Charakterisierung
Kuczyk, Martin; Krülle, Tim; Schmidt, Oliver; Santos Maximo, Eduardo dos; Kaspar, Joerg; Zimmer, Otmar; Zimmermann, Martina; Leyens, Christoph
Book Article
2020Additiv gefertigtes Raketentriebwerk mit Aerospike-Düse für "Microlauncher"
Riede, Mirko
Journal Article
2020Additive Manufacturing and Casting - a Novel Hybrid Approach
Oettel, Markus; Polenz, Stefan; Flügel, Sebastian; Kleine, Andreas; Schrader, Andreas
Internet Contribution
2020Additive manufacturing of complex pure copper parts via binder jetting
Ulrich, Tobias; Greifzu, M.; Fitzek, O.; Dornick, M.; Stepien, Lukas; Lopez, Elena; Brückner, Frank; Leyens, Christoph
Presentation
2020Additive manufacturing technologies for next-generation powertrains
Fiedler, Philipp; Bräunig, Jan; Stelzer, Sebastian; Richter, Robert; Kaulfuß, Frank; Windisch, Thomas; Milaev, Nikolaus
Conference Paper
2020Advanced joining techniques for hybrid parts made of metal and bio-based plastics
Göbel, Gunther; Klotzbach, Annett; Zink, Philipp; Standfuß, Jens
Conference Paper
2020Alkalimetall-Sekundärbatterie und Verwendungen hiervon
Hippauf, Felix; Dörfler, Susanne; Althues, Holger; Kaskel, Stefan; Pampel, Jonas; Bloi, Luise
Patent
2020Alloy design and microstructure evolution in the AlxCoCrFeNi alloy system synthesized by laser metal deposition
Kuczyk, Martin; Kotte, Liliana; Kaspar, Jörg; Zimmermann, Martina; Leyens, Christoph
Journal Article
2020Anordnung zur Modifizierung von Oberflächen metallischer Bauteile
El-Khoury, Mikhael; Kunze, Tim; Seifert, Marko; Bretschneider, Sven
Patent
2020Beeinflussen von Reibung und Verschleiß durch mikrostrukturierte Oberflächen
Franke, Volker; Pätzold, George; Klotzbach, Udo; Kuntze, Thomas
Journal Article
2020A biomimetic fish fin-like robot based on textile reinforced silicone
Pfeil, Sascha; Katzer, Konrad; Kanan, Anas; Mersch, Johannes; Zimmermann, Martina; Kaliske, Michael; Gerlach, Gerald
Journal Article
2020Boron-doped single-walled carbon nanotubes with enhanced thermoelectric power factor for flexible thermoelectric devices
Liu, Ye; Khavrus, Vyacheslav O.; Lehmann, Thomas; Yang, Hong-liu; Stepien, Lukas; Greifzu, Moritz; Oswald, Steffen; Gemming, Thomas; Bezugly, Viktor; Cuniberti, Gianaurelio
Journal Article
2020Challenges and key parameters of lithium-sulfur batteries on pouch cell level
Dörfler, Susanne; Althues, Holger; Härtel, Paul; Abendroth, Thomas; Schumm, Benjamin; Kaskel, Stefan
Journal Article
2020Characterization of self-cleaning properties on superhydrophobic aluminum surfaces fabricated by direct laser writing and direct laser interference patterning
Milles, Stephan; Soldera, Marcos; Kuntze, Thomas; Lasagni, Andrés-Fabián
Journal Article
2020Comparative analysis of the potential of state-of-the-art lasers and new prototypic high-power beam sources for cutting nonmetals
Mickan, Alexander; Rose, Michael; Hauptmann, Jan; Wetzig, Andreas; Leyens, Christoph
Journal Article
2020Comparison of dimensional accuracy and tolerances of powder bed based and nozzle based additive manufacturing processes
Gruber, Samira; Grunert, Christian; Riede, Mirko; Lopez, Elena; Marquardt, Axel; Brückner, Frank; Leyens, Christoph
Journal Article
2020Comparison of structural colors achieved by laser-induced periodic surface structures and direct laser interference patterning
Soldera, Marcos; Fortuna, Franco; Teutoburg-Weiss, Sascha; Milles, Stephan; Taretto, Kurt; Lasagni, Andrés-Fabián
Journal Article
2020A comprehensive study on fused filament fabrication of Ti-6Al-4V structures
Zhang, Yaozhong; Bai, Shengyuan; Riede, Mirko; Garratt, Elias; Roch, Aljoscha
Journal Article
2020Comprehensive study on the formation of grain boundary serrations in additively manufactured Haynes 230 alloy
Haack, Maximilian; Kuczyk, Martin; Seidel, André; Lopez, Elena; Brückner, Frank; Leyens, Christoph
Journal Article
2020Controlling dendrite growth in solid-state electrolytes
Liu, He; Cheng, Xin-Bing; Huang, Jia-Qi; Yuan, Hong; Lu, Yang; Yan, Chong; Zhu, Gao-Long; Xu, Rui; Zhao, Chen-Zi; Hou, Li-Peng; He, Chuanxin; Kaskel, Stefan; Zhang, Qiang
Journal Article
2020Current status and future perspectives of lithium metal batteries
Varzi, Alberto; Thanner, Katharina; Scipioni, Roberto; Lecce, Daniele di; Hassoun, Jusef; Dörfler, Susanne; Althues, Holger; Kaskel, Stefan; Prehal, Christian; Freunberger, Stefan
Journal Article
2020Design rules for laser-treated icephobic metallic surfaces for aeronautic applications
Vercillo, Vittorio; Tonnicchia, Simone; Romano, Jean-Michel; Garcia-Giron, Antonio; Aguilar Morales, Alfredo Ismael; Alamri, Sabri; Dimov, Stefan S.; Kunze, Tim; Lasagni, Andrés-Fabián; Bonaccurso, Elmar
Journal Article
2020Developing a roadmap for the post-processing of additively manufactured aerospike engines
Buchholz, Maximilian; Gloder, Alessia; Gruber, Samira; Marquardt, Axel; Meier, Lucas; Müller, Michael; Propst, Martin; Riede, Mirko; Selbmann, Axel; Sieder-Katzmann, Jan; Tajma, Martin; Bach, Christian
Conference Paper
2020Development of a micro-physiological system for improved structural maturation of iPSC-CMs
Schubert, Mario; Kolanowski, Tomasz; Busek, Mathias; Dmitrieva, Anna; Binnewerg, Björn; Pöche, Jessie; Fischer, Konstanze; Schmieder, Felix; Grünzner, Stefan; Hansen, Sinah; Richter, Andreas; El-Armouche, Ali; Sonntag, Frank; Guan, Kaomei
Journal Article
2020Development of a monitoring strategy for laser-textured metallic surfaces using a diffractive approach
Teutoburg-Weiss, Sascha; Voisiat, Bogdan; Soldera, Marcos; Lasagni, Andrés-Fabián
Journal Article
2020Development of a novel hybrid-piston for application in high performance two-stroke engines
Bechter, Christian; Jahn, Axel; Zimmermann, Frieder; Stamm, Uwe; Herb, Thomas
Report
2020Development of an analytical model for optimization of direct laser interference patterning
Voisiat, Bogdan; Aguilar Morales, Alfredo Ismael; Kunze, Tim; Lasagni, Andrés-Fabián
Journal Article
2020Echtzeit-Emissionscharakterisierung während des Remote-Laserstrahlbearbeitens zum Auslegen einer Querjet-Absaugung mittels Simulationsmodell
Schade, Elke; Mäder, Gerrit; Kaskel, Stefan; Klotzbach, Annett; Sauer, Martin; Schiefer, Tom
Journal Article
2020Efficiency improvement of multilayer lab-on-a-chip production by dynamic beam shaping
Sonntag, Frank; Kuntze, Thomas; Schöps, Patrick; Behrens, Stephan; Schmieder, Florian; Franke, Volker; Klotzbach, Udo
Conference Paper
2020Einfluss der Balancierung und des Binders auf die elektrochemischen Eigenschaften von Silizium-Kohlenstoff-Komposit-Anoden in Festkörperbatteriezellen
Poetke, Stephanie
Master Thesis
2020Enabling high-energy solid-state batteries with stable anode interphase by the use of columnar silicon anodes
Cangaz, Sahin; Hippauf, Felix; Reuter, Florian; Dörfler, Susanne; Abendroth, Thomas; Althues, Holger; Kaskel, Stefan
Journal Article
2020Enhanced structural maturation of human induced pluripotent stem cell-derived cardiomyocytes under a controlled microenvironment in a microfluidic system
Kolanowski, Tomasz Jan; Busek, Mathias; Schubert, Mario; Dmitrieva, Anna; Binnewerg, Björn; Pöche, Jessie; Fisher, Konstanze; Schmieder, Florian; Grünzner, Stefan; Hansen, Sinah; Richter, Andreas; El-Armouche, Ali; Sonntag, Frank; Guan, Kaomei
Journal Article
2020Entwickeln und Auslegen von lasergeschweißten Getriebekomponenten für die Luftfahrt
Wagner, Markus; Jahn, Axel; Standfuß, Jens; Leyens, Christoph; Müller, Christian; Conrad, Susanne; Palt, Matthias
Conference Paper
2020Evaluation of mechanical properties of porous OSG films by PFQNM AFM and benchmarking with traditional instrumentation
Ovchinnikov, I.S.; Vishnevskiy, A.S.; Seregin, D.S.; Rezvanov, A.A.; Schneider, Dieter; Sigov, A.S.; Vorotilov, K.A.; Baklanov, R.A.
Journal Article
2020Expansion-tolerant architectures for stable cycling of ultrahigh-loading sulfur cathodes in lithium-sulfur batteries
Shaibani, Mahdokht; Mirshekarloo, Meysam Sharifzadeh; Singh, Ruhani; Easton, Christopher D.; Cooray, M.C. Dilusha; Eshraghi, Nicolas; Abendroth, Thomas; Dörfler, Susanne; Althues, Holger; Kaskel, Stefan; Hollenkamp, Anthony F.; Hill, Matthew R.; Majumder, Mainak
Journal Article
2020Fabrication of functional superhydrophobic surfaces on carbon fibre reinforced plastics by IR and UV direct laser interference patterning
Hauschwitz, Petr; Jagdheesh, R.; Alamri, Sabri; Rostohar, D.; Kunze, Tim; Brajer, J.; Kopecek, Jaromir; Mocek, Tomas
Journal Article
2020Fabrication of hierarchical surface textures using multi-pulse direct laser interference patterning with nanosecond pulses
El-Khoury, Mikhael; Alamri, Sabri; Voisiat, Bogdan; Kunze, Tim; Lasagni, Andrés-Fabián
Journal Article
2020Fast beam oscillations improve laser cutting of thick materials
Wetzig, Andreas; Herwig, Patrick; Borkmann, Madlen; Goppold, Cindy; Mahrle, Achim; Leyens, Christoph
Journal Article
2020Feinstzerkleinerung von CFK-Abfällen und Charakterisierung der Zerkleinerungsprodukte
Krampitz, Thomas; Zöllner, Mareen; Lieberwirth, Holger; Kamptner, Andre; Friedrich, Jens
Journal Article
2020Fraunhofer DDMC 2020 special issue of the progress in additive manufacturing journal. Editorial
Brückner, Frank; Bremen, Sebastian; Müller, Bernhard
Editorial
2020Fraunhofer-Institut für Werkstoff- und Strahltechnik. Jahresbericht 2019/2020
 
Annual Report
2020Fügeverfahren sowie Bearbeitungskopf und Fertigungsmaschine zum Durchführen des Verfahrens
Standfuß, Jens; Klotzbach, Annett; Heltsch, Norbert
Patent
2020Future AM. The Next Generation of Additive Manufacturing Processes
Schleifenbaum, Johannes Heinrich; Tenbrock, Christian; Emmelmann, Claus; Leyens, Christoph; Brückner, Frank; Michaelis, Alexander
Book Article
2020Gießen & Additiv: Hybride Fertigungsketten für automobile Anwendungen
Polenz, Stefan; Oettel, Markus; Flügel, Sebastian; Kleine, Andreas
Journal Article
2020Hierarchical micro-/nano-structures on polycarbonate via UV pulsed laser processing
Mezera, Marek; Alamri, Sabri; Hendriks, Ward A.P.M.; Hertwig, Andreas; Elert, Anna Maria; Bonse, Jörn; Kunze, Tim; Lasagni, Andrés-Fabián; Römer, Gert-Willem R.B.E.
Journal Article
2020High-dynamic-range areal profilometry using an imaging, dispersion-encoded low-coherence interferometer
Taudt, Christopher; Nelsen, Bryan; Baselt, Tobias; Koch, Edmund; Hartmann, Peter
Journal Article
2020High-throughput direct laser interference patterning: New configurations and applications
Lang, Valentin; Madelung, Aleksander; Alamri, Sabri; Steege, Tobias; Krupop, Benjamin; Aguilar Morales, Alfredo Ismael; Kunze, Tim; Lasagni, Andrés-Fabián
Conference Paper
2020Homogeneous intensity within the Rayleigh length and enhanced depth of focus for Gaussian beams
Bischoff, Christian; Jäger, Erwin; Umhofer, Udo; Lasagni, Andrés-Fabián; Völklein, Friedemann
Journal Article
2020Hot embossing of multifunctional transparent polymers from Cr stamps structured by direct laser interference patterning
Soldera, Marcos; Fu, Yangxi; Fortuna, Franco; Wang, Wei; Lasagni, Andrés-Fabián
Conference Paper
2020How to improve throughput in direct laser interference patterning: Top-hat beam profile and burst mode
Voisiat, Bogdan; Ströbel, Joachim; Du, Keming; Lasagni, Andrés-Fabián
Conference Paper
2020Hybrid manufacturing of titanium Ti-6Al-4V combining laser metal deposition and cryogenic milling
Moritz, Juliane; Seidel, André; Kopper, Michael; Bretschneider, Jörg; Gumpinger, Johannes; Finaske, Thomas; Riede, Mirko; Schneeweiß, Michael; Lopez, Elena; Brückner, Frank; Leyens, Christoph; Rohr, Thomas; Ghidini, Tommaso
Journal Article
2020Hybride Fertigungsprozessketten aus Gießen und additiver Fertigung für automobile Anwendungen
Polenz, Stefan; Oettel, Markus; Flügel, Sebastian; Kleine, Andreas
Journal Article
2020Hybride Fertigungsprozessketten Gießen-Additiv. Wie Aluminiumdruckguss gewinnbringend mit der additiven Fertigung kombiniert werden kann
Flügel, Sebastian; Oettel, Markus; Kleine, Andreas; Polenz, Stefan
Conference Paper
2020Image-based algorithm for nozzle adhesion detection in powder-fed directed-energy deposition
Kledwig, Christian; Perfahl, Holger; Reisacher, Martin; Brückner, Frank; Bliedtner, Jens; Leyens, Christoph
Journal Article
2020Imperfections in narrow gap multi-layer welding - Potential causes and countermeasures
Näsström, Jonas; Brückner, Frank; Kaplan, Alexander F.H.
Journal Article
2020Improvement of laser beam fusion cutting of mild and stainless steel due to longitudinal, linear beam oscillation
Goppold, Cindy; Pinder, Thomas; Schulze, Susanne; Herwig, Patrick; Lasagni, Andrés-Fabián
Journal Article
2020Improvement of metallic surfaces hydrophobicity and corrosion resistance by direct write and combined direct write-DLIP hierarchical micro-nano structuring
Ocaña, José L.; Huerta-Murillo, Daniel; Lasagni, Andrés-Fabián; Aguilar-Morales, A.I.; Alamri, Sabri; Cardoso, José T.; García-Beltrán, Ángel; Cordovilla, Francisco; Angulo, Ignacio
Conference Paper
2020Improving and Monitoring the Magnetic Pulse Welding Process between Dissimilar Metals
Bellmann, Jörg; Schettler, Sebastian; Schulze, Sebastian; Wagner, Markus; Standfuß, Jens; Zimmermann, Martina; Beyer, Eckhard; Leyens, Christoph
Presentation
2020An incompressible smoothed particle hydrodynamics (ISPH) model of direct laser interference patterning
Demuth, Cornelius; Lasagni, Andrés-Fabián
Journal Article
2020Innovatives Konzept der Strahloszillation zum effizienten Laserstrahlschmelzschneiden
Goppold, Cindy
: Lasagni, Andrés-Fabián (1. Gutachter); Bliedtner, Jens (2. Gutachter)
Dissertation
2020Interface formation during collision welding of aluminum
Niessen, Benedikt; Schumacher, Eugen; Lueg-Althoff, Jörn; Bellmann, Jörg; Böhme, Marcus; Böhm, Stefan; Tekkaya, A. Erman; Beyer, Eckhard; Leyens, Christoph; Wagner, Martin Franz-Xaver; Groche, Peter
Journal Article
2020Interference-based laser-induced micro-plasma ablation of glass
Alamri, Sabri; Sürmann, Paul A.; Lasagni, Andrés-Fabián; Kunze, Tim
Journal Article
2020Investigation of CMAS resistance of sacrificial suspension sprayed alumina topcoats on EB-PVD 7YSZ layers
Mikulla, Christoph; Naraparaju, Ravisankar; Schulz, Uwe; Toma, Filofteia-Laura; Barbosa, Maria Manuel; Steinberg, Lars; Leyens, Christoph
Journal Article
2020Investigation on the formation of grain boundary serrations in additively manufactured superalloy Haynes 230
Haack, Maximilian; Kuczyk, Martin; Seidel, André; Lopez, Elena; Brückner, Frank; Leyens, Christoph
Journal Article
2020Investigations on possible joining processes for lightweight bodystructures for commercial vehicles in municipal service operations
Schiefer, Tom; Mahlme, Amer; Theis, Dominik; Ganbaatar, Bud; Sauer, Martin; Zimmermann, Frieder; Klotzbach, Annett; Standfuß, Jens; Zimmermann, Martina
Conference Paper
2020Joining and characterization of PLA aluminium compounds for industrial applications
Zink, Philipp; Schmid, Anna; Klotzbach, Annett; Harre, Kathrin; Göbel, Gunther
Conference Paper
2020Joining dissimilar thin-walled tubes by magnetic pulse welding
Lueg-Althoff, Jörn; Bellmann, Jörg; Hahn, Marlon; Schulze, Sebastian; Gies, Soeren; Tekkaya, A. Erman; Beyer, Eckhard
Journal Article
2020Joining of additively manufactured titanium with different surface structures with fiber-reinforced PEEK for lightweight design applications
Moritz, Juliane; Götze, Philipp; Schiefer, Tom; Klotzbach, Annett; Standfuß, Jens; Lopez, E.; Brückner, Frank; Leyens, Christoph
Conference Paper
2020Kathodeneinheit und Verfahren zum Herstellen einer Kathodeneinheit
Hippauf, Felix; Schumm, Benjamin; Tschöcke, Sebastian; Althues, Holger; Kaskel, Stefan; Dörfler, Susanne
Patent
2020Laser and surface functionalization
Moglia, Francesca; Pozo, Jose; Lasagni, Andrés-Fabián
Journal Article
2020Laser interference patterned ta-C-coated dry forming tools
Jähnig, Theresa; Lasagni, Andrés-Fabián
Journal Article
2020Laser metal deposition of copper on diverse metals using green laser sources
Siva Prasad, Himani; Brückner, Frank; Volpp, Jörg; Kaplan, Alexander Friedrich Hermann
Journal Article
2020Laser micro- and nano-material processing - Part 2
Lasagni, Andrés-Fabián; Bonse, Jörn
Editorial
2020Laser micro- and nano-materials processing - Part 1
Bonse, Jörn; Lasagni, Andrés-Fabián
Editorial
2020Laser Structuring of Open Cell Metal Foams for Micro Scale Surface Enlargement
Baumann, Robert; Rauscher, Thomas; Bernäcker, Christian Immanuel; Zwahr, Christoph; Weißgärber, T.; Röntzsch, L.; Lasagni, Andrés-Fabián
Journal Article
2020Laser vibrometric characterization and model development of a human vocal tract for acoustic therapy of deaf patients
Gruner, Michael; Maschke, Ronny; Taudt, Christopher; Hoyer, P.; Hartmann, Peter
Conference Paper
2020Laser-induced cell injury in closed micro physiological systems: A novel method to study regeneration processes in vitro
Schmieder, Florian; Förster, Deborah; Rösler, Mechthild; Sradnick, Jan; Klotzbach, Udo; Hohenstein, Bernd; Sonntag, Frank
Conference Paper
2020Less CO2 and fine dust emissions in automotive
Barbosa, Maria Manuel; Bischoff, René; Strauß, Winfried; Hillig, Holger; Nowotny, Steffen; Leyens, Christoph
Journal Article
2020Maximizing the efficiency of laser-fabricated diffraction gratings on PET using direct laser interference patterning
Soldera, Marcos; Alamri, Sabri; Storm, Sebastian; Kunze, Tim; Lasagni, Andrés-Fabián
Conference Paper
2020Mechanistic insights into the role of covalent triazine frameworks as cathodes in lithium-sulfur batteries
Troschke, Erik; Kensy, Christian; Haase, Frederik; Dörfler, Susanne; Joseph, Yvonne; Lotsch, Bettina V.; Kaskel, Stefan
Journal Article
2020Microstructural, mechanical and tribological properties of finely grained Al2O3 coatings obtained by SPS and S-HVOF methods
Michalak, Monika; Latka, Leszek; Sokolowski, Pawel; Toma, Filofteia-Laura; Myalska, Hanna; Denoirjean, Alain; Ageorges, Hélène
Journal Article
2020A mixed ether electrolyte for lithium metal anode protection in working Lithium-Sulfur batteries
Chen, Wei-Jing; Zhao, Chang-Xin; Li, Bo-Quan; Jin, Qi; Zhang, Xue-Qiang; Yuan, Tong-Qi; Zhang, Xitian; Jin, Zhehui; Kaskel, Stefan; Zhang, Qiang
Journal Article
2020Modelling and prototyping of a microfluidic cartridge for extracting immune cells from small volume blood samples
Behrens, Stephan; Sonntag, Frank; Schmieder, Florian
Journal Article
2020Modification of silicone adhesives using electrically conductive fillers to dissipate electrical or electrostatic charges
Leicht, Heinrich; Kraus, Eduard; Baudrit, Benjamin; Hochrein, Thomas; Bastian, M.; Langer, Maurice; Klotzbach, Annett; Wanielik, Adrian
Presentation
2020Modification of Ti6Al4V surface properties by combined DLW-DLIP hierarchical micro-nano structuring
Ocaña, José L.; Huerta-Murillo, Daniel; Lasagni, Andrés-Fabián; Aguilar Morales, Alfredo Ismael; Alamri, Sabri; Cardoso, José Tiago; García-Beltrán, Ángel; Cordovilla, Francisco; Angulo, Ignacio
Journal Article
2020Modifikation von Silikonen mit elektrisch leitfähigen Füllstoffen zur Ableitung elektrischer oder elektrostatischer Ladungen
Langer, Maurice; Klotzbach, Annett; Wanielik, Adrian; Leicht, Heinrich; Kraus, Eduard; Baudrit, Benjamin; Hochrein, Thomas
Journal Article
2020MOF-derived electrocatalysts for oxygen reduction, oxygen evolution and hydrogen evolution reactions
Wang, Hao-Fan; Chen, Liyu; Pang, Huan; Kaskel, Stefan; Xu, Qiang
Journal Article
2020Monitoring the heat accumulation during fabrication of surface micro-patterns on metallic surfaces using direct laser interference patterning
Schröder, Nikolai; Vergara, Germán; Voisiat, Bogdan; Lasagni, Andrés-Fabián
Journal Article
2020Nanobeam X-ray fluorescence and diffraction computed tomography on human bone with a resolution better than 120 nm
Palle, J.; Wittig, N.K.; Kubec, A.; Niese, S.; Rosenthal, M.; Burghammer, M.; Grünewald, T.A.; Birkedal, H.
Journal Article
2020Nanoscale stress distributions and microstructural changes at scratch track cross-sections of a deformed brittle-ductile CrN-Cr bilayer
Meindlhumer, Michael; Zalesak, Jakub; Ecker, Werner; Rosenthal, Martin; Niese, Sven; Gawlitza, Peter; Hruby, Hynek; Mitterer, Christian; Daniel, Rostislav; Keckes, Jozef; Todt, Juraj
Journal Article
2020A near-vertical approach to laser narrow gap multi-layer welding
Näsström, Jonas; Brückner, Frank; Kaplan, Alexander F.H.
Journal Article
2020Neue Ansätze zur Beschichtung von Werkzeugkanten (Tl.1)
Krülle, Tim; Kaulfuß, Johannes; Zimmer, Otmar; Leyens, Christoph
Journal Article
2020Neue Ansätze zur Beschichtung von Werkzeugkanten (Tl.2)
Krülle, Tim; Kaulfuß, Frank; Zimmer, Otmar; Leyens, Christoph
Journal Article
2020Non-disruptive Supercontinuum based scattering analyses of cartilage and collagen before and after apoptosis and necrosis
Baselt, Tobias; Taudt, Christopher; Kabardiadi-Virkovski, Alexander; Prade, Ina; Lasagni, Andrés-Fabián; Hartmann, Peter
Conference Paper
2020Novel approach for suppressing of hot cracking via magneto-fluid dynamic modification of the laser-induced marangoni convection
Seidel, André; Degener, Luise; Schneider, Jakob; Brückner, Frank; Beyer, Eckhard; Leyens, Christoph
Conference Paper
2020Novel local shielding approach for the laser welding based additive manufacturing of large structural space components from titanium
Kolsch, N.; Seidel, A.; Finaske, T.; Brueckner, F.; Gumpinger, J.; Bavdaz, M.; Rohr, T.; Ghidini, T.; Leyens, C.
Journal Article
2020On the ablation behavior of carbon fiber-reinforced plastics during laser surface treatment using pulsed lasers
Gebauer, Jana; Burkhardt, Maximilian; Franke, Volker; Lasagni, Andrés-Fabián
Journal Article
2020One-shot roughness measurements based on dispersion-encoded low coherence interferometry
Taudt, Christopher; Baselt, Tobias; Nelsen, Bryan; Koch, Edmund; Hartmann, Peter
Conference Paper
2020Parallel online monitoring of substance transport processes in a micro-physiological tubular barrier
Gottlöber, Felix; Behrens, Stephan; Sradnick, Jan; Sonntag, Frank; Hugo, Christian; Schmieder, Florian
Poster
2020Particle ejection by jetting and related effects in impact welding processes
Bellmann, Jörg; Lueg-Althoff, Jörn; Niessen, Benedikt; Böhme, Marcus; Schumacher, Eugen; Beyer, Eckhard; Leyens, Christoph; Tekkaya, A. Erman; Groche, Peter; Wagner, Martin Franz-Xaver; Böhm, Stefan
Journal Article
2020Patterning of transparent polymers using high-throughput methods: Application in flexible perovskite solar cells with enhanced light trapping
Soldera, Marcos; Wang, Qiong; Soldera, Flavio; Lang, Valentin; Abate, Antonio; Lasagni, Andrés-Fabián
Conference Paper
2020Piezo-based beam shaping for high dynamic three-dimensional (3-D) laser material processing - PISTOL
Devaraj Nair, Lakshmi; Goppold, Cindy; Böttner, Paul; Stoffel, Daniel; Jahn, Axel; Jolliffe, Cliff; Bach, Mathias
Journal Article
2020Potential and challenges of additive manufacturing for topology optimized spacecraft structures
Willner, Robin; Lender, Stefan; Ihl, Andreas; Wilsnack, Christoph; Gruber, Samira; Brandão, Ana D.; Pambaguian, Laurent; Riede, Mirko; Lopez, Elena; Brückner, Frank; Leyens, Christoph
Journal Article
2020Powder incorporation and spatter formation in high deposition rate blown powder directed energy deposition
Prasad, Himani Siva; Brückner, Frank; Kaplan, Alexander F.H.
Journal Article
2020Prediction of optimum process parameters fabricated by direct laser interference patterning based on central composite design
El-Khoury, Mikhael; Voisiat, Bogdan; Kunze, Tim; Lasagni, Andrés-Fabián
Journal Article
2020Prognose für thermoelektrische Anwendungen
Greifzu, Moritz; Stepien, Lukas; Lopez, Elena; Brückner, Frank; Leyens, Christoph
Presentation
2020Prospects of laser cutting for lava-like fuel-containing materials (LFCM) management at the Chornobyl nuclear power plant
Wetzig, Andreas; Saveliev, Maxim; Krasnov, Viktor; Mahrle, Achim; Herwig, Patrick; Javelle, Cécile; Leyens, Christoph; Molitor, Norbert
Journal Article
2020Qualitätssicherung in der additiven Fertigung
Brückner, Frank; Leyens, C.; Lopez, E.; Wilsnack, C.
Book Article
2020Rapid development of micro-physiological systems using novel modular plug&play construction kit
Behrens, Stephan; Schmieder, Florian; Günther, Katja; Sonntag, Frank
Poster
2020Rapid development of tailored micro-physiological systems using novel modular plug&play construction kit
Behrens, Stephan; Schmieder, Florian; Sonntag, Frank
Poster
2020The role of balancing nanostructured silicon anodes and NMC cathodes in lithium-ion full-cells with high volumetric energy density
Baasner, Anne; Reuter, Florian; Seidel, Matthias; Krause, Andreas; Pflug, Erik; Härtel, Paul; Dörfler, Susanne; Abendroth, Thomas; Althues, Holger; Kaskel, Stefan
Journal Article
2020Scalable production of nitrogen-doped carbons for multilayer lithium-sulfur battery cells
Kensy, Christian; Härtel, Paul; Maschita, Johannes; Dörfler, Susanne; Schumm, Benjamin; Abendroth, Thomas; Althues, Holger; Lotsch, Bettina Valeska; Kaskel, Stefan
Journal Article
2020Scatterometry and diffractometry techniques to monitor surfaces textured by rapid ultra-short pulse laser
Alleaume, Clovis; Alamri, Sabri; Kunze, Tim; Ziegler, Johannes; Wilson, Andy; Bola, Rita
Journal Article
2020Schneidwerkzeug mit amorphem Kohlenstoff und Multilagenbeschichtung
Roch, Teja
Patent
2020Schneidwerkzeug mit räumlich strukturierter Beschichtung
Beyer, Eckhard; Roch, Teja
Patent
2020Selective ultra-short-pulsed laser ablation for scribing of organic photovoltaics and decorative applications
Franke, Volker; Kuntze, Thomas
Conference Paper
2020Self-limited ice formation and efficient de-icing on superhydrophobic micro-structured airfoils through direct laser interference patterning
Alamri, Sabri; Vercillo, Vittorio; Aguilar Morales, Alfredo Ismael; Schell, Frederic; Wetterwald, Marc; Lasagni, Andrés-Fabián; Bonaccurso, Elmar; Kunze, Tim
Journal Article
2020Silizium-basierte Anoden für Lithium-Ionen- und Lithium-Schwefel-Akkumulatoren
Baasner, Anne
: Kaskel, Stefan (AkademischeR BetreuerIn); Weidinger, Inez (AkademischeR BetreuerIn)
Dissertation
2020Sodium sulfide cathodes superseding hard carbon pre-sodiation for the production and operation of sodium-sulfur batteries at room temperature
Bloi, Luise Maria; Pampel, Jonas; Dörfler, Susanne; Althues, Holger; Kaskel, Stefan
Journal Article
2020Special issue featuring papers from the international thermal spray conference (ITSC) 2019
McDonald, André; Azarmi, Fardad; Balani, Kantesh; Cizek, Jan; Koivuluoto, Heli; Lau, Yuk-Chiu; Li, Hua; Toma, Filofteia-Laura
Journal Article
2020Strain monitoring during laser metal deposition of inconel 718 by neutron diffraction
Cabeza, Sandra; Özcan, Burak; Cormier, Jonathan; Pirling, Thilo; Polenz, Stefan; Marquardt, Franz; Hansen, Thomas C.; Lopez, Elena; Vilalta-Clemente, Arantxa; Leyens, Christoph
Conference Paper
2020Structuring of forming tools for lubricant-free deep drawing
Jähnig, Theresa; Mousavi, Ali; Brosius, Alexander; Lasagni, Andrés-Fabián
Conference Paper
2020A study on the accuracy of thermography-based temperature measurement in powder-fed directed energy deposition
Kledwig, Christian; Hofer, Markus; Reisacher, Martin; Brückner, Frank; Bliedtner, Jens; Leyens, Christoph
Journal Article
2020A study on the microstructural characterization and phase compositions of thermally sprayed Al2O3-TiO2 coatings obtained from powders and water-based suspensions
Michalak, Monika; Toma, Filofteia-Laura; Latka, Leszek; Sokolowski, Pawel; Barbosa, Maria Manuel; Ambroziak, Andrzej
Journal Article
2020Superlubricity und tribochemischer Verschleiß: Wechselwirkung von tetraedisch amorphen Kohlenstoffschichten mit fettsäurebasierten Schmierstoffen
Makowski, Stefan
: Beyer, Eckhard (Betreuer); Schultrich, Bernd (Gutachter); Lasagni, Andrés-Fabián (Gutachter); Weihnacht, Volker (Betreuer)
Dissertation
2020Supermode supercontinuum generation in the cladding of a photonic crystal fiber
Baselt, Tobias; Taudt, Christopher; Nelsen, Bryan; Lasagni, Andrés-Fabián; Hartmann, Peter
Conference Paper
2020Surface modification of forming tools for aluminum sheet metal forming
Kuisat, Florian; Abraham, Tim; Schmidt, Torsten; Weber, Martin; Demmler, Matthias; Bräuer, Günter; Lasagni, Andrés Fabián
Journal Article
2020Synthesis and structure of the silver(I) complexes [Ag2(C4H6O4N)NO3]·H2O and Ag6(C6H6O6N)2 for the formulation of silver inks in nanoimprint lithography
Kintzle, Susann; Eckhardt, Kai; Getzschmann, Jürgen; Bon, Volodymyr; Grothe, Julia; Kaskel, Stefan
Journal Article
2020Technical homes for human cells
Leyens, Christoph; Klotzbach, Udo; Sonntag, Frank; Wolperdinger, Markus; Loskill, Peter; Bauernhansl, Thomas; Traube, Andreas; Brecher, Christian; Schmitt, Robert; König, Nils
Book Article
2020Thermisches Direktfügen von Biokunststoff mit Metall
Zink, Philipp
Journal Article
2020Toward high-throughput texturing of polymer foils for enhanced light trapping in flexible perovskite solar cells using roll-to-roll hot embossing
Soldera, Marcos; Wang, Qiong; Soldera, Flavio; Lang, Valentin; Abate, Antonio; Lasagni, Andrés-Fabián
Journal Article
2020Umformverhalten von großflächigen, dünnwandigen und sphärischen Strukturen im Flugzeugbau
Zimmermann, Frieder
: Brosius, Alexander (Gutachter); Leyens, Christoph (Gutachter); Hackius, Jens (Gutachter)
Dissertation
2020UV direct laser interference patterning of diffraction gratings in poly-hydroxyethyl-methacrylate ophthalmic polymers
Sola, Daniel; Alamri, Sabri; Lasagni, Andrés-Fabián
Journal Article
2020Vacuum oxy-nitro carburizing of tool steels: Structure and mechanical reliability
Nikolova, Maria; Nikolov, Danail; Yankov, Emil; Derin, Bora; Topalski, Slavcho
Journal Article
2020Verfahren zum Herstellen einer Festelektrolytmembran oder einer Anode und Festelektrolytmembran oder Anode
Hippauf, Felix; Schumm, Benjamin; Tschöcke, Sebastian; Althues, Holger; Kaskel, Stefan; Dörfler, Susanne
Patent
2020Verfahren zum Modifizieren und anschließendem Ausbilden einer Oberflächenbeschichtung auf einem metallischen Bauteil
Zwick, Axel; Roch, Teja
Patent
2020Verfahren zum Verbinden von Bauteilen, die einen faserverstärkten thermoplastischen Kunststoff aufweisen
Standfuß, Jens; Schulze, Sebastian; Vichniakov, Alexei
Patent
2020Verfahren zur Herstellung einer strukturierten Oberfläche auf einem Gegenstand
Lasagni, Andrés-Fabián; Voisiat, Bogdan
Patent
2020Verfahren zur Herstellung von Bipolarplatten für Brennstoffzellen
Beyer, Eckhard; Roch, Teja
Patent
2020Verfahren zur Lithiierung von Elektroden von lithiumbasierten elektrischen Energiespeicherelementen sowie mit dem Verfahren hergestelltes elektrisches Energiespeicherelement
Kaskel, Stefan; Althues, Holger; Schumm, Benjamin; Abendroth, Thomas; Schönherr, Kay
Patent
2020Vorrichtung und Verfahren zur Strahlformung und Strahlmodulation bei einer Lasermaterialbearbeitung
Wetzig, Andreas; Mahrle, Achim; Herwig, Patrick; Hauptmann, Jan; Eberhardt, Ramona; Böttner, Paul
Patent
2020Wettability control of polymeric microstructures replicated from laser-patterned stamps
Fu, Yangxi; Soldera, Marcos; Wang, Wei; Milles, Stephan; Deng, Kangfa; Voisiat, Bogdan; Nielsch, Kornelius; Lasagni, Andrés-Fabián
Journal Article
2020A worm-like biomimetic crawling robot based on cylindrical dielectric elastomer actuators
Pfeil, Sascha; Henke, Markus; Katzer, Konrad; Zimmermann, Martina; Gerlach, Gerald
Journal Article