| | |
|---|
| 2020 | AB-Versus AA+BB-Suzuki polycondensation: A palladium/Tris(tert‐butyl)phosphine catalyst can outperform conventional catalysts
Zhang, Kenan; Tkachov, Roman; Ditte, Kristina; Kiriy, Nataliya; Kiriy, Anton; Vot, Brigitte | Journal Article |
| 2020 | Alloy design and microstructure evolution in the AlxCoCrFeNi alloy system synthesized by laser metal deposition
Kuczyk, Martin; Kotte, Liliana; Kaspar, Jörg; Zimmermann, Martina; Leyens, Christoph | Journal Article |
| 2020 | A biomimetic fish fin-like robot based on textile reinforced silicone
Pfeil, Sascha; Katzer, Konrad; Kanan, Anas; Mersch, Johannes; Zimmermann, Martina; Kaliske, Michael; Gerlach, Gerald | Journal Article |
| 2020 | Boron-doped single-walled carbon nanotubes with enhanced thermoelectric power factor for flexible thermoelectric devices
Liu, Ye; Khavrus, Vyacheslav O.; Lehmann, Thomas; Yang, Hong-liu; Stepien, Lukas; Greifzu, Moritz; Oswald, Steffen; Gemming, Thomas; Bezugly, Viktor; Cuniberti, Gianaurelio | Journal Article |
| 2020 | Challenges and key parameters of lithium-sulfur batteries on pouch cell level
Dörfler, Susanne; Althues, Holger; Härtel, Paul; Abendroth, Thomas; Schumm, Benjamin; Kaskel, Stefan | Journal Article |
| 2020 | Characterization of self-cleaning properties on superhydrophobic aluminum surfaces fabricated by direct laser writing and direct laser interference patterning
Milles, Stephan; Soldera, Marcos; Kuntze, Thomas; Lasagni, Andrés-Fabián | Journal Article |
| 2020 | Comparative analysis of the potential of state-of-the-art lasers and new prototypic high-power beam sources for cutting nonmetals
Mickan, Alexander; Rose, Michael; Hauptmann, Jan; Wetzig, Andreas; Leyens, Christoph | Journal Article |
| 2020 | Comparison of dimensional accuracy and tolerances of powder bed based and nozzle based additive manufacturing processes
Gruber, Samira; Grunert, Christian; Riede, Mirko; Lopez, Elena; Marquardt, Axel; Brückner, Frank; Leyens, Christoph | Journal Article |
| 2020 | A comprehensive study on fused filament fabrication of Ti-6Al-4V structures
Zhang, Yaozhong; Bai, Shengyuan; Riede, Mirko; Garratt, Elias; Roch, Aljoscha | Journal Article |
| 2020 | Comprehensive study on the formation of grain boundary serrations in additively manufactured Haynes 230 alloy
Haack, Maximilian; Kuczyk, Martin; Seidel, André; Lopez, Elena; Brückner, Frank; Leyens, Christoph | Journal Article |
| 2020 | Controlling dendrite growth in solid-state electrolytes
Liu, He; Cheng, Xin-Bing; Huang, Jia-Qi; Yuan, Hong; Lu, Yang; Yan, Chong; Zhu, Gao-Long; Xu, Rui; Zhao, Chen-Zi; Hou, Li-Peng; He, Chuanxin; Kaskel, Stefan; Zhang, Qiang | Journal Article |
| 2020 | Design rules for laser-treated icephobic metallic surfaces for aeronautic applications
Vercillo, Vittorio; Tonnicchia, Simone; Romano, Jean-Michel; Garcia-Giron, Antonio; Aguilar Morales, Alfredo Ismael; Alamri, Sabri; Dimov, Stefan S.; Kunze, Tim; Lasagni, Andrés-Fabián; Bonaccurso, Elmar | Journal Article |
| 2020 | Development of a micro-physiological system for improved structural maturation of iPSC-CMs
Schubert, Mario; Kolanowski, Tomasz; Busek, Mathias; Dmitrieva, Anna; Binnewerg, Björn; Pöche, Jessie; Fischer, Konstanze; Schmieder, Felix; Grünzner, Stefan; Hansen, Sinah; Richter, Andreas; El-Armouche, Ali; Sonntag, Frank; Guan, Kaomei | Abstract |
| 2020 | Development of a monitoring strategy for laser-textured metallic surfaces using a diffractive approach
Teutoburg-Weiss, Sascha; Voisiat, Bogdan; Soldera, Marcos; Lasagni, Andrés-Fabián | Journal Article |
| 2020 | Development of an analytical model for optimization of direct laser interference patterning
Voisiat, Bogdan; Aguilar Morales, Alfredo Ismael; Kunze, Tim; Lasagni, Andrés-Fabián | Journal Article |
| 2020 | Efficiency improvement of multilayer lab-on-a-chip production by dynamic beam shaping
Sonntag, Frank; Kuntze, Thomas; Schöps, Patrick; Behrens, Stephan; Schmieder, Florian; Franke, Volker; Klotzbach, Udo | Conference Paper |
| 2020 | Enabling high-energy solid-state batteries with stable anode interphase by the use of columnar silicon anodes
Cangaz, Sahin; Hippauf, Felix; Reuter, Florian; Dörfler, Susanne; Abendroth, Thomas; Althues, Holger; Kaskel, Stefan | Journal Article |
| 2020 | Enhanced structural maturation of human induced pluripotent stem cell-derived cardiomyocytes under a controlled microenvironment in a microfluidic system
Kolanowski, Tomasz Jan; Busek, Mathias; Schubert, Mario; Dmitrieva, Anna; Binnewerg, Björn; Pöche, Jessie; Fisher, Konstanze; Schmieder, Florian; Grünzner, Stefan; Hansen, Sinah; Richter, Andreas; El-Armouche, Ali; Sonntag, Frank; Guan, Kaomei | Journal Article |
| 2020 | Expansion-tolerant architectures for stable cycling of ultrahigh-loading sulfur cathodes in lithium-sulfur batteries
Shaibani, Mahdokht; Mirshekarloo, Meysam Sharifzadeh; Singh, Ruhani; Easton, Christopher D.; Cooray, M.C. Dilusha; Eshraghi, Nicolas; Abendroth, Thomas; Dörfler, Susanne; Althues, Holger; Kaskel, Stefan; Hollenkamp, Anthony F.; Hill, Matthew R.; Majumder, Mainak | Journal Article |
| 2020 | Fabrication of functional superhydrophobic surfaces on carbon fibre reinforced plastics by IR and UV direct laser interference patterning
Hauschwitz, Petr; Jagdheesh, R.; Alamri, Sabri; Rostohar, D.; Kunze, Tim; Brajer, J.; Kopecek, Jaromir; Mocek, Tomas | Journal Article |
| 2020 | Fabrication of hierarchical surface textures using multi-pulse direct laser interference patterning with nanosecond pulses
El-Khoury, Mikhael; Alamri, Sabri; Voisiat, Bogdan; Kunze, Tim; Lasagni, Andrés-Fabián | Journal Article |
| 2020 | Fast beam oscillations improve laser cutting of thick materials
Wetzig, Andreas; Herwig, Patrick; Borkmann, Madlen; Goppold, Cindy; Mahrle, Achim; Leyens, Christoph | Journal Article |
| 2020 | Feinstzerkleinerung von CFK-Abfällen und Charakterisierung der Zerkleinerungsprodukte
Krampitz, Thomas; Zöllner, Mareen; Lieberwirth, Holger; Kamptner, Andre; Friedrich, Jens | Journal Article |
| 2020 | Fraunhofer DDMC 2020 special issue of the progress in additive manufacturing journal. Editorial
Brückner, Frank; Bremen, Sebastian; Müller, Bernhard | Journal Article, Conference Paper |
| 2020 | Gießen & Additiv: Hybride Fertigungsketten für automobile Anwendungen
Polenz, Stefan; Oettel, Markus; Flügel, Sebastian; Kleine, Andreas | Journal Article |
| 2020 | Hierarchical micro-/nano-structures on polycarbonate via UV pulsed laser processing
Mezera, Marek; Alamri, Sabri; Hendriks, Ward A.P.M.; Hertwig, Andreas; Elert, Anna Maria; Bonse, Jörn; Kunze, Tim; Lasagni, Andrés-Fabián; Römer, Gert-Willem R.B.E. | Journal Article |
| 2020 | High-dynamic-range areal profilometry using an imaging, dispersion-encoded low-coherence interferometer
Taudt, Christopher; Nelsen, Bryan; Baselt, Tobias; Koch, Edmund; Hartmann, Peter | Journal Article |
| 2020 | High-throughput direct laser interference patterning: New configurations and applications
Lang, Valentin; Madelung, Aleksander; Alamri, Sabri; Steege, Tobias; Krupop, Benjamin; Aguilar Morales, Alfredo Ismael; Kunze, Tim; Lasagni, Andrés-Fabián | Conference Paper |
| 2020 | Hot embossing of multifunctional transparent polymers from Cr stamps structured by direct laser interference patterning
Soldera, Marcos; Fu, Yangxi; Fortuna, Franco; Wang, Wei; Lasagni, Andrés-Fabián | Conference Paper |
| 2020 | How to improve throughput in direct laser interference patterning: Top-hat beam profile and burst mode
Voisiat, Bogdan; Ströbel, Joachim; Du, Keming; Lasagni, Andrés-Fabián | Conference Paper |
| 2020 | Hybrid manufacturing of titanium Ti-6Al-4V combining laser metal deposition and cryogenic milling
Moritz, Juliane; Seidel, André; Kopper, Michael; Bretschneider, Jörg; Gumpinger, Johannes; Finaske, Thomas; Riede, Mirko; Schneeweiß, Michael; Lopez, Elena; Brückner, Frank; Leyens, Christoph; Rohr, Thomas; Ghidini, Tommaso | Journal Article |
| 2020 | Hybride Fertigungsprozessketten Gießen-Additiv. Wie Aluminiumdruckguss gewinnbringend mit der additiven Fertigung kombiniert werden kann
Flügel, Sebastian; Oettel, Markus; Kleine, Andreas; Polenz, Stefan | Conference Paper |
| 2020 | Image-based algorithm for nozzle adhesion detection in powder-fed directed-energy deposition
Kledwig, Christian; Perfahl, Holger; Reisacher, Martin; Brückner, Frank; Bliedtner, Jens; Leyens, Christoph | Journal Article |
| 2020 | Imperfections in narrow gap multi-layer welding - Potential causes and countermeasures
Näsström, Jonas; Brückner, Frank; Kaplan, Alexander F.H. | Journal Article |
| 2020 | Improvement of laser beam fusion cutting of mild and stainless steel due to longitudinal, linear beam oscillation
Goppold, Cindy; Pinder, Thomas; Schulze, Susanne; Herwig, Patrick; Lasagni, Andrés-Fabián | Journal Article |
| 2020 | Improvement of metallic surfaces hydrophobicity and corrosion resistance by direct write and combined direct write-DLIP hierarchical micro-nano structuring
Ocaña, José L.; Huerta-Murillo, Daniel; Lasagni, Andrés-Fabián; Aguilar-Morales, A.I.; Alamri, Sabri; Cardoso, José T.; García-Beltrán, Ángel; Cordovilla, Francisco; Angulo, Ignacio | Conference Paper |
| 2020 | An incompressible smoothed particle hydrodynamics (ISPH) model of direct laser interference patterning
Demuth, Cornelius; Lasagni, Andrés-Fabián | Journal Article |
| 2020 | Interference-based laser-induced micro-plasma ablation of glass
Alamri, Sabri; Sürmann, Paul A.; Lasagni, Andrés-Fabián; Kunze, Tim | Journal Article |
| 2020 | Investigation of CMAS resistance of sacrificial suspension sprayed alumina topcoats on EB-PVD 7YSZ layers
Mikulla, Christoph; Naraparaju, Ravisankar; Schulz, Uwe; Toma, Filofteia-Laura; Barbosa, Maria Manuel; Steinberg, Lars; Leyens, Christoph | Journal Article |
| 2020 | Investigation on the formation of grain boundary serrations in additively manufactured superalloy Haynes 230
Haack, Maximilian; Kuczyk, Martin; Seidel, André; Lopez, Elena; Brückner, Frank; Leyens, Christoph | Journal Article |
| 2020 | Joining and characterization of PLA aluminium compounds for industrial applications
Zink, Philipp; Schmid, Anna; Klotzbach, Annett; Harre, Kathrin; Göbel, Gunther | Conference Paper |
| 2020 | Joining dissimilar thin-walled tubes by magnetic pulse welding
Lueg-Althoff, Jörn; Bellmann, Jörg; Hahn, Marlon; Schulze, Sebastian; Gies, Soeren; Tekkaya, A. Erman; Beyer, Eckhard | Journal Article |
| 2020 | Laser interference patterned ta-C-coated dry forming tools
Jähnig, Theresa; Lasagni, Andrés-Fabián | Journal Article |
| 2020 | Laser metal deposition of copper on diverse metals using green laser sources
Siva Prasad, Himani; Brückner, Frank; Volpp, Jörg; Kaplan, Alexander Friedrich Hermann | Journal Article |
| 2020 | Laser vibrometric characterization and model development of a human vocal tract for acoustic therapy of deaf patients
Gruner, Michael; Maschke, Ronny; Taudt, Christopher; Hoyer, P.; Hartmann, Peter | Conference Paper |
| 2020 | Laser-induced cell injury in closed micro physiological systems: A novel method to study regeneration processes in vitro
Schmieder, Florian; Förster, Deborah; Rösler, Mechthild; Sradnick, Jan; Klotzbach, Udo; Hohenstein, Bernd; Sonntag, Frank | Conference Paper |
| 2020 | Maximizing the efficiency of laser-fabricated diffraction gratings on PET using direct laser interference patterning
Soldera, Marcos; Alamri, Sabri; Storm, Sebastian; Kunze, Tim; Lasagni, Andrés-Fabián | Conference Paper |
| 2020 | Mechanistic insights into the role of covalent triazine frameworks as cathodes in lithium-sulfur batteries
Troschke, Erik; Kensy, Christian; Haase, Frederik; Dörfler, Susanne; Joseph, Yvonne; Lotsch, Bettina V.; Kaskel, Stefan | Journal Article |
| 2020 | Modification of Ti6Al4V surface properties by combined DLW-DLIP hierarchical micro-nano structuring
Ocaña, José L.; Huerta-Murillo, Daniel; Lasagni, Andrés-Fabián; Aguilar Morales, Alfredo Ismael; Alamri, Sabri; Cardoso, José Tiago; García-Beltrán, Ángel; Cordovilla, Francisco; Angulo, Ignacio | Journal Article |
| 2020 | MOF-derived electrocatalysts for oxygen reduction, oxygen evolution and hydrogen evolution reactions
Wang, Hao-Fan; Chen, Liyu; Pang, Huan; Kaskel, Stefan; Xu, Qiang | Journal Article |
| 2020 | A near-vertical approach to laser narrow gap multi-layer welding
Näsström, Jonas; Brückner, Frank; Kaplan, Alexander F.H. | Journal Article |
| 2020 | Non-disruptive Supercontinuum based scattering analyses of cartilage and collagen before and after apoptosis and necrosis
Baselt, Tobias; Taudt, Christopher; Kabardiadi-Virkovski, Alexander; Prade, Ina; Lasagni, Andrés-Fabián; Hartmann, Peter | Conference Paper |
| 2020 | Patterning of transparent polymers using high-throughput methods: Application in flexible perovskite solar cells with enhanced light trapping
Soldera, Marcos; Wang, Qiong; Soldera, Flavio; Lang, Valentin; Abate, Antonio; Lasagni, Andrés-Fabián | Conference Paper |
| 2020 | Piezo-based beam shaping for high dynamic three-dimensional (3-D) laser material processing - PISTOL
Devaraj Nair, Lakshmi; Goppold, Cindy; Böttner, Paul; Stoffel, Daniel; Jahn, Axel; Jolliffe, Cliff; Bach, Mathias | Journal Article |
| 2020 | Potential and challenges of additive manufacturing for topology optimized spacecraft structures
Willner, Robin; Lender, Stefan; Ihl, Andreas; Wilsnack, Christoph; Gruber, Samira; Brandão, Ana D.; Pambaguian, Laurent; Riede, Mirko; Lopez, Elena; Brückner, Frank; Leyens, Christoph | Journal Article |
| 2020 | Powder incorporation and spatter formation in high deposition rate blown powder directed energy deposition
Prasad, Himani Siva; Brückner, Frank; Kaplan, Alexander F.H. | Journal Article |
| 2020 | Rapid development of micro-physiological systems using novel modular plug&play construction kit
Behrens, Stephan; Schmieder, Florian; Günther, Katja; Sonntag, Frank | Poster |
| 2020 | The role of balancing nanostructured silicon anodes and NMC cathodes in lithium-ion full-cells with high volumetric energy density
Baasner, Anne; Reuter, Florian; Seidel, Matthias; Krause, Andreas; Pflug, Erik; Härtel, Paul; Dörfler, Susanne; Abendroth, Thomas; Althues, Holger; Kaskel, Stefan | Journal Article |
| 2020 | Scalable production of nitrogen-doped carbons for multilayer lithium-sulfur battery cells
Kensy, Christian; Härtel, Paul; Maschita, Johannes; Dörfler, Susanne; Schumm, Benjamin; Abendroth, Thomas; Althues, Holger; Lotsch, Bettina Valeska; Kaskel, Stefan | Journal Article |
| 2020 | Sodium sulfide cathodes superseding hard carbon pre-sodiation for the production and operation of sodium-sulfur batteries at room temperature
Bloi, Luise Maria; Pampel, Jonas; Dörfler, Susanne; Althues, Holger; Kaskel, Stefan | Journal Article |
| 2020 | Special issue featuring papers from the international thermal spray conference (ITSC) 2019
McDonald, André; Azarmi, Fardad; Balani, Kantesh; Cizek, Jan; Koivuluoto, Heli; Lau, Yuk-Chiu; Li, Hua; Toma, Filofteia-Laura | Journal Article, Conference Paper |
| 2020 | Structuring of forming tools for lubricant-free deep drawing
Jähnig, Theresa; Mousavi, Ali; Brosius, Alexander; Lasagni, Andrés-Fabián | Conference Paper |
| 2020 | A study on the microstructural characterization and phase compositions of thermally sprayed Al2O3-TiO2 coatings obtained from powders and water-based suspensions
Michalak, Monika; Toma, Filofteia-Laura; Latka, Leszek; Sokolowski, Pawel; Barbosa, Maria Manuel; Ambroziak, Andrzej | Journal Article |
| 2020 | Supermode supercontinuum generation in the cladding of a photonic crystal fiber
Baselt, Tobias; Taudt, Christopher; Nelsen, Bryan; Lasagni, Andrés-Fabián; Hartmann, Peter | Conference Paper |
| 2020 | Toward high-throughput texturing of polymer foils for enhanced light trapping in flexible perovskite solar cells using roll-to-roll hot embossing
Soldera, Marcos; Wang, Qiong; Soldera, Flavio; Lang, Valentin; Abate, Antonio; Lasagni, Andrés-Fabián | Journal Article |
| 2020 | Vacuum oxy-nitro carburizing of tool steels: Structure and mechanical reliability
Nikolova, Maria; Nikolov, Danail; Yankov, Emil; Derin, Bora; Topalski, Slavcho | Journal Article |
| 2020 | Verfahren zum Modifizieren und anschließendem Ausbilden einer Oberflächenbeschichtung auf einem metallischen Bauteil
Zwick, Axel; Roch, Teja | Patent |
| 2020 | Verfahren zur Herstellung einer strukturierten Oberfläche auf einem Gegenstand
Lasagni, Andrés-Fabián; Voisiat, Bogdan | Patent |
| 2020 | Vorrichtung und Verfahren zur Strahlformung und Strahlmodulation bei einer Lasermaterialbearbeitung
Wetzig, Andreas; Mahrle, Achim; Herwig, Patrick; Hauptmann, Jan; Eberhardt, Ramona; Böttner, Paul | Patent |
| 2020 | A worm-like biomimetic crawling robot based on cylindrical dielectric elastomer actuators
Pfeil, Sascha; Henke, Markus; Katzer, Konrad; Zimmermann, Martina; Gerlach, Gerald | Journal Article |
| 2019 | The “In situ electrolyte” concept: Using activation chemicals as electrolytes for carbon-based supercapacitors
Leistenschneider, Desirée; Schneidermann, Christina; Hippauf, Felix; Grätz, Sven; Borchardt, Lars | Journal Article |
| 2019 | Additiv-Guss ein neuartiger Hybridansatz für automobile Anwendungen
Oettel, Markus; Flügel, Sebastian; Polenz, Stefan; Kleine, Andreas; Gebauer, Mathias; Müller, Bernhard | Conference Paper |
| 2019 | Additive manufacturing - The revolution of product manufacturing in the digital age
Leyens, Christoph; Brückner, Frank; Lopez, Elena; Gärtner, Anne | Book Article |
| 2019 | Additive manufacturing of an ALSI40 mirror coated with electroless nickel for cryogenic space applications
Eberle, Sebastian; Reutlinger, Arnd; Curzadd, Bailey; Müller, Michael; Riede, Mirko; Wilsnack, Christoph; Brandão, Ana D.; Pambaguian, Laurent; Seidel, André; López, Elena M.; Brückner, Frank; Beyer, Eckhard; Leyens, Christoph | Conference Paper |
| 2019 | Advanced manufacturing approach via the combination of selective laser melting and laser metal deposition
Schneider, Jörg; Seidel, André; Gumpinger, Johannes; Riede, Mirko; Lopez, Elena; Brückner, Frank; Leyens, Christoph | Journal Article |
| 2019 | Ammonia plasma-induced n-type doping of semiconducting carbon nanotube films: Thermoelectric properties and ambient effects
Liu, Ye; Nitschke, Mirko; Stepien, Lukas; Khavrus, Vyacheslav O.; Bezugly, Viktor; Cuniberti, Gianaurelio | Journal Article |
| 2019 | Analysis of melt pool characteristics and process parameters using a coaxial monitoring system during directed energy deposition in additive manufacturing
Kledwig, Christian; Perfahl, Holger; Reisacher, Martin; Brückner, Frank; Bliedtner, Jens; Leyens, Christoph | Journal Article |
| 2019 | Avoiding starvation in tribocontact through active lubricant transport in laser textured surfaces
Stark, Tobias; Kiedrowski, Thomas; Marschall, Holger; Lasagni, Andrés-Fabián | Journal Article |
| 2019 | Beam shaping using two spatial light modulators for ultrashort pulse laser ablation of metals
Mikhaylov, Dmitriy; Kiedrowski, Thomas; Lasagni, Andrés-Fabián | Conference Paper |
| 2019 | Beeinflussen von Reibung und Verschleiß durch mikrostrukturierte Oberflächen
Franke, Volker; Kuntze, Thomas | Conference Paper |
| 2019 | Beyond Fresnel: Absorption of fibre laser radiation at rough stainless steel surfaces
Hipp, Dominik; Mahrle, Achim; Beyer, Eckhard | Journal Article |
| 2019 | Classification of black plastics waste using fluorescence imaging and machine learning
Gruber, Florian; Grählert, Wulf; Wollmann, Philipp; Kaskel, Stefan | Journal Article |
| 2019 | Comparative analysis of the potential of state-of-the-art lasers and new prototypic high power beam sources for cutting non-metals
Mickan, Alexander; Rose, Michael; Hauptmann, Jan; Wetzig, Andreas; Leyens, Christoph | Conference Paper |
| 2019 | Comparison of dimensional accuracy and tolerances of powder bed based and nozzle based additive manufacturing processes
Gruber, Samira; Grunert, Christian; Riede, Mirko; Lopez, Elena; Marquardt, Axel; Brückner, Frank; Leyens, Christoph | Conference Paper |
| 2019 | Cut edge structures and gas boundary layer characteristics in laser beam fusion cutting
Borkmann, Madlen; Mahrle, Achim; Beyer, Eckhard; Leyens, Christoph | Conference Paper |
| 2019 | Cyclic deformation characteristics of the metastable β-type Ti-40Nb alloy
Reck, André; Pilz, Stefan; Kuczyk, Martin; Gebert, Annett; Zimmermann, Martina | Journal Article |
| 2019 | Design and manufacturing method of fundamental beam mode shaper for adapted laser beam profile in laser material processing
Bischoff, Christian; Völklein, Friedemann; Schmitt, Jana; Rädel, Ulrich; Umhofer, Udo; Jäger, Erwin; Lasagni, Andrés-Fabián | Journal Article |
| 2019 | Design of perfectly ordered periodic structures on polymers using direct laser interference patterning
Lasagni, Andrés-Fabián; Alamri, Sabri; Rößler, Florian; Lang, Valentin; Voisiat, Bogdan | Book Article |
| 2019 | Design, manufacturing and test of a highly dynamic piezo-driven metal mirror for laser material processing
Böttner, Paul; Reinlein, Claudia; Jahn, Axel; Herwig, Patrick; Goppold, Cindy; Stoffel, Daniel; Bach, Mathias | Conference Paper |
| 2019 | Designing room temperature sodium sulfur batteries with long cycle-life at pouch cell level
Pampel, Jonas; Dörfler, Susanne; Althues, Holger; Kaskel, Stefan | Journal Article |
| 2019 | Development in dry metal forming - Structuring Ta-C coated tools with direct laser interference patterning and ultra-short pulsed lasers to reduce friction and wear
Jähnig, Theresa; Roch, Teja; Lasagni, Andrés-Fabián | Conference Paper |
| 2019 | Development of an experimental setup and a study for the comparison between optical properties and the subjective perception of a quality of a display surface
Puder, Theresa; Rudek, Florian; Taudt, Christopher; Kabardiadi-Virkovski, Alexander; Hartmann, Peter | Conference Paper |
| 2019 | Direct Laser Interference Patterning of bioceramics
Fabris, Douglas; Lasagni, Andrés-Fabián; Fredel, Marcio C.; Henriques, Bruno | Journal Article |
| 2019 | DLIP holographic structuring: From basic concept to advanced monitoring methods and industrial scale production
Voisiat, Bogdan; Teutoburg-Weiss, Sascha; Rank, Andreas; Lasagni, Andrés-Fabián | Conference Paper |
| 2019 | Durability of superhydrophobic laser-treated metal surfaces under icing conditions
Vercillo, Vittorio; Cardoso, José Tiago; Huerta-Murillo, Daniel; Tonnicchia, Simone; Laroche, Alexandre; Mayén Guillén, Javier Alejandro; Ocaña, José Luis; Lasagni, Andrés-Fabián; Bonaccurso, Elmar | Journal Article |
| 2019 | Editorial. Journal of Laser Applications
Leyens, Christoph | Journal Article |
| 2019 | Effect of the forming behavior on the impact flash during magnetic pulse welding of tubes
Bellmann, Jörg; Überschaer, F.; Lueg-Althoff, Jörn; Schulze, Sebastian; Hahn, Marlon; Beyer, Eckhard; Tekkaya, A. Erman | Conference Paper |
| 2019 | The effect of thickness on the properties of laser-deposited NiBSi-WC coating on a Cu-Cr-Zr substrate
Korobov, Yuriy Stanislavovich; Khudorozhkova, Yuliya Viktorovna; Hillig, Holger; Vopneruk, Aleksandr Aleksandrovich; Kotelnikov, Aleksandr B.; Burov, Sergey Vladimirovich; Balu, Prabu; Makarov, Aleksey Viktorovich; Chernov, Alexey | Journal Article |
| 2019 | Efficient separation of battery materials using remote laser cutting-high output performance, contour flexibility, and cutting edge quality
Baumann, Robert; Lasagni, Andrés-Fabián; Herwig, Patrick; Wetzig, Andreas; Leyens, Christoph; Beyer, Eckhard | Journal Article |
| 2019 | Einfluss der Wandstärke auf das Umformverhalten und das Schweißergebnis beim Magnetpulsschweißen
Bellmann, Jörg; Lueg-Althoff, Jörn; Schulze, Sebastian; Hahn, Marlon; Gies, Soeren; Beyer, Eckhard; Tekkaya, A. Erman | Journal Article |
| 2019 | Energy coupling of laser radiation on AISI 304 stainless steel: Effect of high temperatures and surface oxidation
Hipp, Dominik; Mahrle, Achim; Beyer, Eckhard | Journal Article |
| 2019 | Entwicklung einer skalierbaren Mikrowellen Plasmaquelle
Roch, Uwe Julius-Herbert
: Beyer, Eckhard (Gutachter); Leyens, Christoph (Gutachter) | Dissertation |
| 2019 | Erosion resistance of CMAS infiltrated sacrificial suspension sprayed alumina top layer on EB-PVD 7YSZ coatings
Steinberg, Lars; Mikulla, Christoph; Naraparaju, Ravisankar; Toma, Filofteia-Laura; Großmann, Holger; Schulz, Uwe; Leyens, Christoph | Journal Article |
| 2019 | Evaluation of a high-speed multispectral light source for stroboscopic differential imaging for endocardial examination of Daphnia magna
Wittig, Marcus; Rogler, Georg N.; Kabardiadi-Virkovski, Alexander; Baselt, Tobias; Hartmann, Peter | Conference Paper |
| 2019 | An experimental and theoretical study on the crystal structure and elastic properties of Ta 1-xOx coatings
Almeida Alves, C.F.; Marques, Luís Silvino Alves; Calderon, S.V.; Ferreira, Paulo J.; Schneider, Dieter; Cavaleiro, Albano J.; Carvalho, S. | Journal Article |
| 2019 | Experimental study on the air-side thermal-flow performance of additively manufactured heat exchangers with novel fin designs
Unger, Sebastian; Beyer, Matthias; Gruber, Samira; Willner, Robin; Hampel, Uwe | Journal Article |
| 2019 | Experimental study on the magnetic pulse welding process of large aluminum tubes on steel rods
Bellmann, Jörg; Schettler, Sebastian; Dittrich, Steffen; Lueg-Althoff, Jörn; Schulze, Sebastian; Hahn, Marlon; Beyer, Eckhard; Tekkaya, A. Erman | Conference Paper |
| 2019 | Fabrication and characterization of diffraction gratings in ophthalmic polymers by using UV direct laser interference patterning
Sola, Daniel; Alamri, Sabri; Lasagni, Andrés-Fabián; Artal, Pablo | Journal Article |
| 2019 | Fabrication of high aspect-ratio surface micro patterns on stainless steel using high-speed direct laser interference patterning
Lang, Valentin; Voisiat, Bogdan; Kunze, Tim; Lasagni, Andrés-Fabián | Journal Article |
| 2019 | Fabrication of inclined non-symmetrical periodic micro-structures using direct laser interference patterning
Alamri, Sabri; El-Khoury, Mikhael; Aguilar Morales, Alfredo Ismael; Storm, Sebastian; Kunze, Tim; Lasagni, Andrés-Fabián | Journal Article |
| 2019 | Fabrication of multifunctional titanium surfaces by producing hierarchical surface patterns using laser based ablation methods
Zwahr, Christoph; Helbig, Ralf; Werner, Carsten; Lasagni, Andrés-Fabián | Journal Article |
| 2019 | Fabrication of superhydrophobic and ice-repellent surfaces on pure aluminium using single and multiscaled periodic textures
Milles, Stephan; Soldera, Marcos; Voisiat, Bogdan; Lasagni, Andrés-Fabián | Journal Article |
| 2019 | Fast and cost effective fabrication of microlens arrays for enhancing light out-coupling of organic light-emitting diodes
Stellmacher, Andre; Liu, Yuan; Soldera, Marcos; Rank, Andreas; Reineke, Sebastian; Lasagni, Andrés-Fabián | Journal Article |
| 2019 | Fast laser cutting of thin metal
Wetzig, Andreas; Herwig, Patrick; Hauptmann, Jan; Baumann, Robert; Rauscher, Peter; Schlosser, Michael; Pinder, Thomas; Leyens, Christoph | Journal Article, Conference Paper |
| 2019 | Fatigue behavior of non-optimized laser-cut medical grade Ti-6AL-4V-ELI sheets and the effects of mechanical post-processing
Reck, André; Zeuner, André Till; Zimmermann, Martina | Journal Article |
| 2019 | Flexibilisierung und Individualisierung automobiler Serienproduktion durch die Verbindung von Druckgießen und additiver Fertigung
Oettel, Markus; Kleine, Andreas; Flügel, Sebastian; Polenz, Stefan; Schrader, Andreas; Eibisch, Harald; Fischer, Rainer | Presentation |
| 2019 | Floor-integrated optical fall detector for frail people
Maschke, Ronny; Taudt, Christopher; Rudek, Florian; Hartmann, Peter | Conference Paper |
| 2019 | Fraunhofer Institute for Material and Beam Technology. Annual Report 2018
| Annual Report |
| 2019 | Fraunhofer-Institut für Werkstoff- und Strahltechnik. Jahresbericht 2018
| Annual Report |
| 2019 | Functional integration approaches via laser powder bed processing
Moritz, Juliane; Seidel, André; Braun, Bernard; Brandão, Ana D.; Pambaguian, Laurent; Köhler, Bernd; Barth, Martin; Riede, Mirko; Lopez, Elena; Brückner, Frank; Leyens, Christoph | Journal Article |
| 2019 | Functionalization of fiber-reinforced plastic based on laser micro structuring
Gebauer, Jana; Klotzbach, Udo; Lasagni, Andrés-Fabián | Conference Paper |
| 2019 | Future AM. Die nächste Generation additiver Fertigungsverfahren
Schleifenbaum, Johannes Henrich; Tenbrock, C.; Emmelmann, Claus; Leyens, Christoph; Brückner, Frank; Michaelis, Alexander | Book Article |
| 2019 | Gezielte Einstellung der Nahtausbildung beim Fügen durch Magnetpulsschweißen
Beyer, Eckhard; Tekkaya, A. Erman | Conference Paper |
| 2019 | Gradients of microstructure, stresses and mechanical properties in a multi-layered diamond thin film revealed by correlative cross-sectional nano-analytics
Gruber, David P.; Todt, Juraj; Wöhrl, Nicolas; Zalesak, Jakub; Tkadletz, Michael; Kubec, Adam; Niese, Sven; Burghammer, Manfred; Rosenthal, Martin; Sternschulte, Hadwig; Pfeifenberger, Manuel J.; Sartory, Bernhard; Keckes, Jozef | Journal Article |
| 2019 | Growth of regular micro-pillar arrays on steel by polarization-controlled laser interference patterning
Voisiat, Bogdan; Zwahr, Christoph; Lasagni, Andrés-Fabián | Journal Article |
| 2019 | Grundlagenuntersuchungen zum Schmelzen von Papier
Lull, Florian
: Horn, Alexander (1. Prüfer); Panzner, Michael (2. Prüfer) | Master Thesis |
| 2019 | Hermetisches Fügen von MEMS-basierten Bauelementen mithilfe reaktiver Multischichtsysteme (RMS)
Pflug, Erik; Dietrich, Georg; Leson, Andreas; Schumacher, Axel; Knappmann, Stephan; Dehe, Alfons | Journal Article |
| 2019 | High accuracy beam splitting using spatial light modulator combined with machine learning algorithms
Mikhaylov, Dmitriy; Zhou, Baifan; Kiedrowski, Thomas; Mikut, Ralf; Lasagni, Andrés-Fabián | Journal Article |
| 2019 | High dynamic beam shaping by piezo driven modules for efficient and high quality laser beam cutting and welding
Jahn, Axel; Goppold, Cindy; Herwig, Patrick; Reinlein, Claudia; Böttner, Paul; Stoffel, Daniel; Bach, Mathias | Conference Paper |
| 2019 | High Entropy Alloys generated with laser cladding
Kuczyk, Martin; Kotte, Liliana; Kaspar, Joerg; Barbosa, Maria Manuel; Nowotny, Steffen; Zimmermann, Martina; Leyens, Christoph | Conference Paper |
| 2019 | High throughput direct laser interference patterning of aluminum for fabrication of super hydrophobic surfaces
Lang, Valentin; Voisiat, Bogdan; Lasagni, Andrés-Fabián | Journal Article |
| 2019 | How to get deeper structures with the same energy: Fabrication of periodic structures in stainless steel using Direct Laser Interference Patterning with burst mode ps-pulses
Ströbel, Joachim; Voisiat, Bogdan; Du, Keming; Lasagni, Andrés-Fabián | Journal Article |
| 2019 | How to tailor structural colors for extended visibility and white light generation employing direct laser interference patterning
Storm, Sebastian; Alamri, Sabri; Soldera, Marcos; Kunze, Tim; Lasagni, Andrés-Fabián | Journal Article |
| 2019 | Hybrid process chain from die casting and additive manufacturing
Polenz, Stefan; Oettel, Markus; Lopez, Elena; Leyens, Christoph | Journal Article |
| 2019 | Hybride Prozesskette aus Gießen und additiver Fertigung
Polenz, Stefan; Oettel, Markus; Lopez, Elena; Leyens, Christoph | Journal Article |
| 2019 | Illuminating the future of overlay protection for nuclear power plant
Baufeld, B.; Hillig, H.; Jones, S. | Journal Article |
| 2019 | Image-based algorithm for nozzle adhension detection in powder-fed directed-energy deposition
Kledwig, Christian; Perfahl, Holger; Reisacher, Martin; Brückner, Frank; Bliedtner, Jens; Leyens, Christoph | Conference Paper |
| 2019 | Importance of capacity balancing on the electrochemical performance of Li[Ni0.8Co0.1Mn0.1]O-2 (NCM811)/Silicon full cells
Reuter, Florian; Baasner, Anne; Pampel, Jonas; Piwko, Markus; Dörfler, Susanne; Althues, Holger; Kaskel, Stefan | Journal Article |
| 2019 | Improvement of mechanical properties of plasma sprayed Al2O3-ZrO2-SiO2 amorphous coatings by surface crystallization
Medricky, Jan; Lukac, Frantisek; Csaki, Stefan; Houdková, Šárka; Barbosa, Maria Manuel; Tesar, Tomas; Cizek, Jan; Musalek, Radek; Kovarik, Ondrej; Chraska, Tomas | Journal Article |
| 2019 | Improving component cleanliness during laser remote ablation processes with high-power lasers by optimized emission blower and suction strategies
Schiefer, Tom; Sauer, Martin; Klotzbach, Annett; Schade, Elke; Wöllner, Michelle; Mäder, Gerrit; Leupolt, Beate; Standfuß, Jens; Kaskel, Stefan | Conference Paper |
| 2019 | Improving the homogeneity of diffraction based colours by fabricating periodic patterns with gradient spatial period using Direct Laser Interference Patterning
Voisiat, Bogdan; Wang, Wei; Holzhey, Max; Lasagni, Andrés-Fabián | Journal Article |
| 2019 | In situ raman spectroscopy on silicon nanowire anodes integrated in lithium ion batteries
Krause, Andreas; Tkacheva, Olga; Omar, Ahmad; Langklotz, Ulrike; Giebeler, Lars; Dörfler, Susanne; Fauth, F.; Mikolajick, Thomas; Weber, Walter M. | Journal Article, Conference Paper |
| 2019 | In-process monitoring of laser ablation on thin steel membranes by multispectral shape-from-shading
Jacobs, Paul-Philipp; Nelsen, Bryan; Taudt, Christopher; Rudek, Florian; Hartmann, Peter | Conference Paper |
| 2019 | Increasing heat transfer of metals through periodical microstructures using Direct Laser Interference Patterning
Alamri, Sabri; Schell, Frederic; Steege, Tobias; Lasagni, Andrés-Fabián; Kunze, Tim | Conference Paper |
| 2019 | Influence of microstructural inhomogeneities on the fatigue crack growth behavior under very low amplitudes for two different aluminum alloys
Kirsten, Tanja; Kuczyk, Martin; Wicke, Marcel; Brückner-Foit, Angelika; Bülbül, Fatih; Christ, Hans-Jürgen; Zimmermann, M. | Conference Paper |
| 2019 | Influence of rolling texture on near-threshold crack extension behavior in aluminum alloy EN AW-6082
Wicke, Marcel; Brückner-Foit, Angelika; Kirsten, Tina; Zimmermann, Martina; Bülbül, Fatih; Christ, Hans-Jürgen | Journal Article |
| 2019 | Influence of roughness achieved by periodic structures on the wettability of aluminum using direct laser writing and direct laser interference patterning technology
Milles, Stephan; Voisiat, Bogdan; Nitschke, Mirko; Lasagni, Andrés-Fabián | Journal Article |
| 2019 | Influence of the edge quality to the water sorption of remote laser and mechanically cut carbon fibre reinforced polymer
Rose, Michael; Mickan, Alexander; Hauptmann, Jan; Wetzig, Andreas; Zimmermann, Martina | Journal Article, Conference Paper |
| 2019 | Influence of the vapour channel on processing in laser powder bed fusion
Frostevarg, Jan; Volpp, Jörg; Thompson, Cassidy; Prasad, Himani Siva; Fedina, Tatiana; Brückner, Frank | Journal Article, Conference Paper |
| 2019 | The influence of thrust force on the vitality of bone chips harvested for autologous augmentation during dental implantation
Achour, Anas Ben; Petto, Carola; Meißner, Heike; Hipp, Dominik; Nestler, Andreas; Lauer, Günter; Teicher, Uwe | Journal Article |
| 2019 | Insights into the water adsorption mechanism in the chemically stable zirconium-based MOF DUT-67 - a prospective material for adsorption-driven heat transformations
Bon, Volodymyr; Senkovska, Irena; Evans, Jack D.; Wöllner, Michelle; Hölzel, Markus; Kaskel, Stefan | Journal Article |
| 2019 | Intrinsic heat treatment within additive manufacturing of gamma titanium aluminide space hardware
Seidel, André; Saha, Shuvra; Maiwald, Tim; Moritz, Juliane; Polenz, Stefan; Marquardt, Axel; Kaspar, Joerg; Finaske, Thomas; Lopez, Elena; Brückner, Frank; Leyens, Christoph | Journal Article |
| 2019 | Investigation of carbon-based coatings on austenitic stainless steel for bipolar plates in proton exchange membrane fuel cells, produced by cathodic arc deposition
Steinhorst, Maximilian; Giorgio, Maurizio; Topalski, Slavcho; Roch, Teja | Conference Paper |
| 2019 | Kilohertz dynamic Fourier filter for synthetic-aperture binary hologram reconstruction
Nelsen, Bryan; Kabardiadi-Virkovski, Alexander; Baselt, Tobias; Taudt, Christopher; Hartmann, Peter | Conference Paper |
| 2019 | Laboratory X-ray tomography for metal additive manufacturing
Plessis, Anton du; Roux, Stephan Gerhard le; Waller, Jess; Sperling, Philip; Achilles, Nils; Beerlink, Andre; Métayer, Jean-Francois; Sinico, Mirko; Probst, Gabriel; Dewulf, Wim; Bittner, Florian; Endres, Hans-Josef; Willner, Marian; Drégelyi-Kiss, Ágota; Zikmund, Tomas; Laznovsky, Jakub; Kaiser, Jozef; Pinter, Pascal; Dietrich, Stefan; Lopez, Elena; Fitzek, Oliver; Porebski, Konrad | Journal Article |
| 2019 | Laser enhancement of wire arc additive manufacturing
Näsström, Jonas; Brückner, Frank; Kaplan, Alexander Friedrich Hermann | Journal Article |
| 2019 | Laser multi-pass narrow-gap welding - A promising technology for joining thick-walled components of future power plants
Keßler, Benjamin; Brenner, Berndt; Dittrich, Dirk; Standfuß, Jens; Beyer, Eckhard; Leyens, Christoph; Maier, G. | Conference Paper |
| 2019 | Laser strip cladding for large area metal deposition
Tuominen, Jari; Kaubisch, Marc; Thieme, Sebastian; Näkki, Jonne; Nowotny, Steffen; Vuoristo, Petri | Journal Article |
| 2019 | Laser treatment as sintering process for dispenser printed bismuth telluride based paste
Greifzu, Moritz; Tkachov, Roman; Stepien, Lukas; Lopez, Elena; Brückner, Frank; Leyens, Christoph | Journal Article |
| 2019 | Laser wire cladding - How fine can we go?
Kubisch, Frank; Wollenhaupt, Martin; Thieme, Sebastian; Kaubisch, Marc; Bischoff, René; Barbosa, Maria Manuel; Nowotny, Steffen; Leyens, Christoph | Conference Paper |
| 2019 | Laser-Induced surface acoustic waves for material testing
Schneider, Dieter | Book Article |
| 2019 | Laser-multi-pass narrow-gap welding - An innovative joining technology
Keßler, Benjamin; Dittrich, Dirk; Standfuß, Jens; Brenner, Berndt; Leyens, Christoph; Maier, Gerhard | Conference Paper |
| 2019 | Laser-multi-pass-narrow-gap-welding of nickel superalloy-Alloy 617OCC
Keßler, Benjamin; Brenner, Berndt; Dittrich, Dirk; Standfuß, Jens; Beyer, Eckhard; Leyens, Christoph | Journal Article |
| 2019 | Laserstrahlschweißen dickwandiger und großformatiger Stahlbaustrukturen mit modernen Diodenlasern - eine Alternative zum Laser-MSG-Hybridschweißen!
Dittrich, Dirk; Keßler, Benjamin; Strohbach, Robert; Jahn, Axel | Conference Paper |
| 2019 | Lithium-Sulfur batteries
Kaskel, Stefan | Journal Article |
| 2019 | Machine learning aided phase retrieval algorithm for beam splitting with an LCoS-SLM
Mikhaylov, Dmitriy; Zhou, Baifan; Kiedrowski, Thomas; Mikut, Ralf; Lasagni, Andrés-Fabián | Conference Paper |
| 2019 | Magnetic pulse welding of tubular parts
Bellmann, Jörg; Lueg-Althoff, Jörn; Schulze, Sebastian; Hahn, Marlon; Gies, Soeren; Beyer, Eckhard; Tekkaya, A. Erman | Conference Paper |
| 2019 | Magnetpulsschweißen von metallischen Mischverbindungen
Bellmann, Jörg | Presentation |
| 2019 | Material characterization of AISI 316L flexure pivot bearings fabricated by additive manufacturing
Riede, Mirko; Knoll, Matthias; Wilsnack, Christoph; Gruber, Samira; Cubillo, Alba Alegre; Melzer, Christian; Brandao, A.D.; Pambaguian, Laurent; Seidel, André; López, Elena M.; Brückner, Frank; Leyens, Christoph | Journal Article |
| 2019 | A material experiment for small satellites to characterise the behaviour of carbon nanotubes in space - development and ground validation
Abbe, Elisabeth; Renger, Thomas; Sznajder, Maciej; Klemmed, Benjamin; Sachse, Elisa; Hübner, René; Schüler, Tilman; Bärtling, Yves; Muchow, Benjamin; Tajmar, Martin; Schmiel, Tino | Journal Article |
| 2019 | Measuring the effects of a laser beam on melt pool fluctuation in arc additive manufacturing
Näsström, Jonas; Brückner, Frank; Kaplan, Alexander Friedrich Hermann | Journal Article |
| 2019 | Measuring water adsorption processes of metal-organic frameworks for heat pump applications via optical calorimetry
Wöllner, Michelle; Klein, Nicole; Kaskel, Stefan | Journal Article |
| 2019 | Mechano-chemical decomposition of organic friction modifiers with multiple reactive centres induces superlubricity of ta-C
Kuwahara, Takuya; Romero, Pedro A.; Makowski, Stefan; Weihnacht, Volker; Moras, Gianpietro; Moseler, Michael | Journal Article |
| 2019 | Metal-Organic frameworks and their applications
Bharadwaj, Parimal Kanti; Feng, Pingyun; Kaskel, Stefan; Xu, Qiang | Journal Article |
| 2019 | Microphysiological system for heart tissue - going from 2D to 3D culture
Busek, Mathias; Schubert, Mario; Guan, Kaomei; Sonntag, Frank; Schmieder, Florian; Marschner, Uwe; Richter, Andreas | Journal Article |
| 2019 | A microphysiological system to investigate the pressure dependent filtration at an artificial glomerular kidney barrier
Schmieder, Florian; Behrens, Stephan; Reustle, Nina; Franke, Nathalie; Sonntag, Frank; Sradnick, Jan; Hohenstein, Bernd | Journal Article |
| 2019 | Microstructural, mechanical, and thermo-physical characterization of hypereutectic AlSi40 fabricated by selective laser melting
Müller, Michael; Riede, Mirko; Eberle, Sebastian; Reutlinger, Arnd; Brandão, Ana D.; Pambaguian, Laurent; Seidel, André; López, Elena M.; Brückner, Frank; Beyer, Eckhard; Leyens, Christoph | Journal Article |
| 2019 | Microstructure and fatigue behavior of laser welded alloy 617 OCC
Zimmermann, Martina; Kaspar, Joerg; Kühne, Robert; Brenner, Berndt | Presentation |
| 2019 | Mikrofluidische Vorrichtung für Zellkulturexperimente und Verwendungen hiervon
Busek, Mathias; Grünzner, Stefan; Loskill, Peter; Probst, Christopher; Sonntag, Frank | Patent |
| 2019 | Multiple method micromachining laser platform for fabricating anti-counterfeit elements with multiple-scaled features
Teutoburg-Weiss, Sascha; Sonntag, Frank; Günther, Katja; Lasagni, Andrés-Fabián | Journal Article |
| 2019 | Multispectral imaging system for the structural analysis of highly transparent technical surfaces
Rudek, Florian; Puder, T.; Taudt, Christopher; Hartmann, Peter | Conference Paper |
| 2019 | Neue Ansätze zur Beschichtung von Werkzeugkanten
Krülle, Tim; Kaulfuß, Frank; Zimmer, Otmar; Leyens, Christoph | Book Article |
| 2019 | New concepts for cutting, surface treatment and forming of aluminium sheets used for fibre-metal laminate manufacturing
Dieckhoff, Stefan; Standfuß, Jens; Pap, Jozsef-Sebastian; Klotzbach, Annett; Zimmermann, Frieder; Burchardt, Malte; Regula, Christoph; Wilken, Ralph; Apmann, Hilmar H.; Fortkamp, Kai; Hackius, Jens | Journal Article |
| 2019 | Nitrogen‐doped biomass‐derived carbon by mechanochemical synthesis for lithium‐sulfur batteries
Schneidermann, Christina; Kensy, Christian; Otto, Pascal; Oswald, Steffen; Giebeler, Lars; Leistenschneider, Desirée; Grätz, Sven; Dörfler, Susanne; Kaskel, Stefan; Borchardt, Lars | Journal Article |
| 2019 | A novel local shielding approach for the laser welding based additive manufacturing of large structural space components from titanium
Kolsch, Nico; Seidel, André; Finaske, Thomas; Brückner, Frank; Gumpinger, Johannes; Bavdaz, Marcos; Rohr, Thomas; Ghidini, Tommaso; Leyens, Christoph | Conference Paper |
| 2019 | Numerical investigations of the thermal efficiency in laser-assisted plasma arc welding
Jäckel, Sebastian; Trautmann, Marcus; Hertel, Martin; Füssel, Uwe; Hipp, Dominik; Mahrle, Achim; Beyer, Eckhard | Journal Article |
| 2019 | Numerical simulation of creep forming processes of large-scale and friction stir welded AlMgSc sheets of aeronautical applications
Zimmermann, Frieder; Brosius, Alexander; Standfuß, Jens; Jahn, Axel | Conference Paper |
| 2019 | On the interplay of DLIP and LIPSS upon ultra-short laser pulse irradiation
Alamri, Sabri; Fraggelakis, Fotis; Kunze, Tim; Krupop, Benjamin; Mincuzzi, Girolamo; Kling, Rainer; Lasagni, Andrés-Fabián | Journal Article |
| 2019 | One-step fabrication of asymmetric saw-tooth-like surface structures on stainless steel using direct laser interference patterning
Voisiat, Bogdan; Alamri, Sabri; Lasagni, Andrés-Fabián | Journal Article |
| 2019 | Optics developments for ATHENA
Bavdaz, Marcos; Wille, Eric; Ayre, Mark; Ferreira, Ivo; Shortt, Brian; Fransen, Sebastiaan H.J.A.; Collon, Maximilien J.; Vacanti, Giuseppe; Barrière, Nicolas M.; Landgraf, Boris; Start, Ronald; Baren, Coen V. van; Ferreira, Desiree Della Monica; Massahi, Sonny; Christensen, Finn E.; Krumrey, Michael K.; Burwitz, Vadim; Pareschi, Giovanni; Valsecchi, Giuseppe; Oliver, Paul; Seidel, André; Korhonen, Tapio | Conference Paper |
| 2019 | Optische Anordnung zur Ausbildung von Strukturelementen mit schräg geneigten Oberflächen
El-Khoury, Mikhael; Lasagni, Andrés-Fabián; Alamri, Sabri; Kunze, Tim; Voisiat, Bogdan | Patent |
| 2019 | Optische Anordnung zur gleichzeitigen Ausbildung von Oberflächenstrukturen an einem Substrat mittels direkter Laserinterferenzstrukturierung
Krupop, Benjamin; Lang, Valentin; Lasagni, Andrés-Fabián | Patent |
| 2019 | Overcoming binder limitations of sheet-type solid-state cathodes using a solvent-free dry-film approach
Hippauf, Felix; Schumm, Benjamin; Dörfler, Susanne; Althues, Holger; Fujiki, Satoshi; Shiratsushi, Tomoyuki; Tsujimura, Tomoyuki; Aihara, Yuichi; Kaskel, Stefan | Journal Article |
| 2019 | Overmoulding of consolidated fibre-reinforced thermoplastics - increasing the bonding strength by physical surface pre-treatments
Liebsch, Alexander; Koshukow, Wikentij; Gebauer, Jana; Kupfer, Robert; Gude, Maik | Journal Article, Conference Paper |
| 2019 | Phenomena in multi-material fabrication using laser metal deposition
Brückner, Frank; Schab, Johannes C.; Marquardt, Franz; Müller, Michael; Riede, Mirko; Seidel, André; Lopez, Elena; Leyens, Christoph | Conference Paper |
| 2019 | Picosecond laser interference patterning of periodical micro-architectures on metallic molds for hot embossing
Fu, Yangxi; Soldera, Marcos; Wang, Wei; Voisiat, Bogdan; Lasagni, Andrés-Fabián | Journal Article |
| 2019 | Polysulfide shuttle suppression by electrolytes with low-density for high-energy lithium-sulfur batteries
Weller, Christine; Pampel, Jonas; Dörfler, Susanne; Althues, Holger; Kaskel, Stefan | Journal Article |
| 2019 | Porous silicon thin films as anodes for lithium ion batteries deposited by co-evaporation of silicon and zinc
Saager, Stefan; Scheffel, Bert; Zywitzki, Olaf; Modes, Thomas; Piwko, Markus; Dörfler, Susanne; Althues, Holger; Metzner, Christoph | Journal Article |
| 2019 | Positive effect of laser structured surfaces on tribological performance
Stark, Tobias; Alamri, Sabri; Aguilar-Morales, Alfredo Ismael; Kiedrowski, Thomas; Lasagni, Andrés-Fabián | Journal Article |
| 2019 | Powder catchment in laser metal deposition
Siva Prasad, Himani; Brückner, Frank; Kaplan, Alexander Friedrich Hermann | Journal Article |
| 2019 | A printable paste based on a stable n-Type Poly[Ni-tto] semiconducting polymer
Tkachov, Roman; Stepien, Lukas; Greifzu, Moritz; Kiriy, Anton; Kiriy, Nataliya; Schüler, Tilman; Schmiel, Tino; Lopez, Elena; Brückner, Frank; Leyens, Christoph | Journal Article |
| 2019 | Quo Vadis surface functionalization: How direct laser interference patterning tackle productivity and flexibility in industrial applications
Alamri, Sabri; Krupop, Benjamin; Steege, Tobias; Aguilar Morales, Alfredo Ismael; Lang, Valentin; Storm, Sebastian; Schell, Frederic; Zwahr, Christoph; Kracht, C.; Bieda, Matthias; Voisiat, Bogdan; Klotzbach, Udo; Lasagni, Andrés-Fabián; Kunze, Tim | Conference Paper |
| 2019 | Rapid screening of CO oxidation catalysts using optical calorimetry
Wegner, Karl; Wöllner, Michelle; Zippel, Rene; Medicus, Maximilian; Schade, Elke; Grothe, Julia; Kaskel, Stefan | Journal Article |
| 2019 | Realization of a LIBS-based, temporally and spatially resolved welding control
Neumann, Max; Baselt, Tobias; Kabardiadi-Virkovski, Alexander; Winkler, Yves; Hartmann, Peter | Conference Paper |
| 2019 | The relationship between the premenstrual syndrome and resting cardiac vagal tone in young healthy females: Role of hormonal contraception
Danel, Dariusz; Kozak, Karol; Szala, Anna; Kunert-Keil, Christiane; Dziedzic-Danel, Antonina; Siennicka, Agnieszka | Journal Article |
| 2019 | The role of the surface nano-roughness on the wettability performance of microstructured metallic surface using direct laser interference patterning
Aguilar-Morales, Alfredo Ismael; Alamri, Sabri; Voisiat, Bogdan; Kunze, Tim; Lasagni, Andrés-Fabián | Journal Article |
| 2019 | Spatially resolved cross-linking characterization by imaging low-coherence interferometry
Taudt, Christopher; Nelsen, Bryan; Rossegger, Elisabeth; Schlögl, Sandra; Koch, Edmund; Hartmann, Peter | Journal Article |
| 2019 | Special Issue Featuring Papers from the International Thermal Spray Conference 2018
McDonald, Andre; Azarmi, Fardad; Balani, Kantesh; Cizek, Jan; Koivuluoto, Heli; Lau, Yuk-Chiu; Li, Hua; Toma, Filofteia-Laura | Journal Article, Conference Paper |
| 2019 | Special Section "Light Materials - Science and Technology"
Hehl, Axel von; Hirsch, Jürgen R.; Kainer, Karl U.; Leyens, Christoph | Journal Article |
| 2019 | Study of fluid dynamics at the boundary wall of a microchannel by Bloch surface waves
Occhicone, Agostino; Sinibaldi, Alberto; Sonntag, Frank; Munzert, Peter; Danz, Norbert; Michelotti, Francesco | Journal Article |
| 2019 | Sulfur Cathodes
Althues, Holger; Dörfler, Susanne; Thieme, Sören; Strubel, Patrick; Kaskel, Stefan | Book Article |
| 2019 | Supercontinuum generation in the cladding modes of an endlessly single-mode fiber
Baselt, Tobias; Nelsen, Bryan L.; Lasagni, Andrés-Fabián; Hartmann, Peter | Journal Article |
| 2019 | Surface modification of additively manufactured gamma titanium aluminide hardware
Seidel, André; Davids, Andreas; Polenz, Stefan; Straubel, Ariane; Maiwald, Tim; Moritz, Juliane; Schneider, Jörg; Marquardt, Axel; Saha, S.; Riede, Mirko; Lopez, Elena; Brückner, Frank; Leyens, Christoph | Journal Article |
| 2019 | Suspension sprayed YSZ thermal barrier coatings: Road to industrial application
Barbosa, Maria Manuel; Toma, Filofteia-Laura; Beitelschmidt, Denise; Ligabue, Omar; Bursich, Simone; Tagliaferri, Luca | Conference Paper |
| 2019 | Synthesis of Porous Thin Films as Silicon Anodes for Lithium-Ion Batteries
Saager, Stefan; Scheffel, Bert; Zywitzki, Olaf; Modes, Thomas; Piwko, Markus; Doerfler, Susanne; Althues, Holger; Metzner, Christoph | Journal Article |
| 2019 | Tailoring the adsorption of ACE-inhibiting peptides by nitrogen functionalization of porous carbons
Huettner, Christiane; Hagemann, Diana; Troschke, Erik; Hippauf, Felix; Borchardt, Lars; Oswald, Steffen; Henle, Thomas; Kaskel, Stefan | Journal Article |
| 2019 | Technische Heimaten für menschliche Zellen
Leyens, Christoph; Klotzbach, Udo; Sonntag, Frank; Wolperdinger, Markus; Loskill, Peter; Bauernhansl, Thomas; Traube, Andreas; Brecher, Christian; Schmitt, Robert; König, Niels | Book Article |
| 2019 | Technologien für die automatisierte Fertigung von Faser-Metall-Laminaten
Scheller, Joachim; Dieckhoff, Stefan; Standfuß, Jens | Journal Article |
| 2019 | Theoretical evaluation of radiation pressure magnitudes and effects in laser material processing
Mahrle, Achim; Beyer, Eckhard | Journal Article |
| 2019 | Thermal effects in dissimilar magnetic pulse welding
Bellmann, Jörg; Lueg-Althoff, Jörn; Schulze, Sebastian; Hahn, Marlon; Gies, Soeren; Beyer, Eckhard; Tekkaya, A. Erman | Journal Article |
| 2019 | Thermal efficiency analysis for laser-assisted plasma arc welding of AISI 304 stainless steel
Hipp, Dominik; Mahrle, Achim; Beyer, Eckhard; Jäckel, Sebastian; Hertel, Martin; Füssel, Uwe | Journal Article |
| 2019 | Thermal sprayed aluminum coatings A199 and AlSi12 on carbon fiber reinforced magnesium-alloy AZ91 for integration in aluminum-cast processes
Mrotzek, Tino; Condé-Wolter, Jan; Behnisch, Thomas; Gude, Maik; Barbosa, Maria Manuel; Scheitz, Stefan; Schultz, Davide; Leyens, Christoph | Conference Paper |
| 2019 | Thermodynamic calculation and experimental analysis of critical phase transformations in HVOF-sprayed NiCrAlY-coating alloys
Schab, J.C.; Zimmermann, J.R.A.; Grasso, P.D.; Stankowski, A.; Heinze, Stefan; Marquardt, Axel; Leyens, Christoph | Journal Article |
| 2019 | Thin-film characterization with a dual-channel dispersion-encoded imaging low-coherence interferometry approach
Taudt, Christopher; Preuß, Marco; Nelsen, Bryan; Baselt, Tobias; Koch, Edmund; Hartmann, Peter | Conference Paper |
| 2019 | Tip-tilt piezo platform scanner qualifies dynamic beam shaping for high laser power in cutting applications
Goppold, Cindy; Herwig, Patrick; Stoffel, Daniel; Bach, Martin | Conference Paper |
| 2019 | Track geometry variations in selective laser melting processes
Volpp, Jörg; Brückner, Frank; Kaplan, Alexander Friedrich Hermann | Journal Article |
| 2019 | Tuning Orientational Order of Highly Aggregating P(NDI2OD-T2) by Solvent Vapor Annealing and Blade Coating
Trefz, D.; Gross, Y.M.; Dingler, C.; Tkachov, R.; Hamidi-Sakr, A.; Kiriy, A.; McNeill, C.R.; Brinkmann, M.; Ludwigs, S. | Journal Article |
| 2019 | Ultrafast laser filament-assisted microstructuring of polymers
Stepak, Bogusz; Antończak, Arkadiusz; Klotzbach, Udo | Conference Paper |
| 2019 | Ultrashort Pulsed Laser Surface Patterning of Titanium to Improve Osseointegration of Dental Implants
Zwahr, Christoph; Welle, Alexander; Weingärtner, Tobias; Heinemann, Christiane; Kruppke, Benjamin; Gulow, Nikolai; Große Holthaus, Marzellus; Lasagni, Andrés-Fabián | Journal Article |
| 2019 | Universal LIMS based platform for the automated processing of cell-based assays
Schmieder, Florian; Polk, Christoph; Gottlöber, Felix; Schöps, Patrick; Sonntag, Frank; Deuse, Ronny; Jede, Aline; Petzold, Thomas | Journal Article |
| 2019 | Universal tool LASER - application examples for welding of HT fuel cells as well as heat exchangers and tank systems for H2 processing
Standfuß, Jens; Dittrich, Dirk; Klotzbach, Annett; Mohlau, Phillip; Strohbach, Robert; Leyens, Christoph | Conference Paper |
| 2019 | Untersuchungen zum Einfluss von Viskosität und Rauheit auf Verluste und Verschleiß im Achsgetriebe
Gangauf, Florian
: Leson, Andreas (Betreuer); Schlecht, Berthold (Vorsitzender); Beyer, Eckhard (Gutachter); Leyens, Christoph (Gutachter) | Dissertation |
| 2019 | Verfahren und Anlage zur Rückgewinnung von Kohlenstofffasern aus mindestens einem Faserverbundwerkstoff
Kloiber, Verena; Köckritz, Tilo; Lehmann, Beata; Mager, Alexander | Patent |
| 2019 | Verfahrensübergreifende additive Verarbeitung des Einsatzstahls 1.2764 für Werkzeuge mit verbesserten Verschleißeigenschaften
Bittner, Florian; Thielsch, Juliane; Gustmann, Tobias; Kordaß, Richard; Kolbe, Christian; Maiwald, Tim; Polenz, Stefan | Presentation |
| 2019 | Vorrichtung, die zum Laserstrahlschneiden ausgebildet ist und ein Verfahren zum Laserstrahlschneiden
Mahrle, Achim; Herwig, Patrick; Hipp, Dominik; Jäckel, Sebastian; Hertel, Martin | Patent |
| 2019 | Wavelength dependent laser material processing of ceramic materials
Polenz, Stefan; Seidel, André; Moritz, Juliane; Kunz, Willy; Riede, Mirko; Lopez, Elena; Brückner, Frank; Leyens, Christoph | Journal Article |
| 2019 | Wear-resistant nickel-based laser clad coatings for high-temperature applications
Makarov, Aleksey Viktorovich; Korobov, Yuriy Stanislavovich; Soboleva, Natalia N.; Khudorozhkova, Yuliya Viktorovna; Vopneruk, Aleksandr Aleksandrovich; Balu, Prabu; Barbosa, Maria Manuel; Malygina, Irina Y.; Burov, Sergey Vladimirovich; Stepchenkov, A.K. | Journal Article |
| 2018 | 30 nm X-ray focusing correlates oscillatory stress, texture and structural defect gradients across multilayered TiN-SiOx thin film
Keckes, Jozef; Daniel, Rostislav; Todt, Juraj; Zalesak, Jakub; Sartory, Bernhard; Braun, Stefan; Gluch, Jürgen; Rosenthal, Martin; Burghammer, Manfred; Mitterer, C.; Niese, S.; Kubec, Adam | Journal Article |
| 2018 | Activated sputter deposition of ta-C films
Schultrich, Bernd | Book Article |
| 2018 | Added value by hybrid additive manufacturing and advanced manufacturing approaches
Seidel, André; Straubel, Ariane; Finaske, Thomas; Maiwald, Tim; Polenz, Stefan; Albert, Maximilian; Näsström, Jonas; Marquardt, Axel; Riede, Mirko; Lopez, Elena; Brückner, Frank; Beyer, Eckhard; Leyens, Christoph | Journal Article |
| 2018 | Added value by hybrid additive manufacturing and advanced manufacturing approaches
Seidel, A.; Straubel, A.; Finaske, T.; Maiwald, T.; Polenz, S.; Albert, M.; Näsström, J.; Marquardt, A.; Riede, M.; Lopez, E.; Brueckner, F.; Beyer, E.; Leyens, C. | Journal Article |
| 2018 | Additive Herstellung topologieoptimierter Großbauteile
Lopez, Elena; Tradowsky, Uriel; Brückner, Frank; Leyens, Christoph | Journal Article |
| 2018 | Additive Herstellung topologieoptimierter Großbauteile
Lopez, Elena; Tradowsky, Uriel; Brückner, Frank; Leyens, Christoph | Journal Article |
| 2018 | Additive Manufacturing - die Revolution der Produktherstellung im Digitalzeitalter
Leyens, Christoph; Brückner, Frank; Lopez, Elena; Gärtner, Anne | Book Article |
| 2018 | Additive manufacturing of powdery Ni-based superalloys Mar-M-247 and CM 247 LC in hybrid laser metal deposition
Seidel, André; Finaske, Thomas; Straubel, Ariane; Wendrock, Horst; Maiwald, Tim; Riede, Mirko; Lopez, Elena; Brückner, Frank; Leyens, Christoph | Journal Article |
| 2018 | Adsorption and detection of hazardous trace gases by metal-organic frameworks
Wöllner, Michelle; Hausdorf, Steffen; Klein, Nicole; Müller, Philipp; Smith, Martin W.; Kaskel, Stefan | Journal Article |
| 2018 | Aerosol-printed highly conductive Ag transmission lines for flexible electronic devices
Abt, Marvin; Roch, Aljoscha; Qayyum, Jubaid A.; Pestotnik, Svenja; Stepien, Lukas; Abu-Ageel, Atef; Wright, Brian; Ulusoy, Ahmet Cagri; Albrecht, John; Harle, Lee; Papapolymerou, John | Journal Article |
| 2018 | Amorphous carbon films
Schultrich, Bernd | Book Article |
| 2018 | Analysis of coaxial laser micro cladding processing conditions
Tarasova, Tatiana Vasilievna; Gvozdeva, Galina Olegovna; Nowotny, Steffen; Ableyeva, Riana R.; Dolzhikova, Evgenia Yu | Journal Article |
| 2018 | Binding energy referencing for XPS in alkali metal-based battery materials research (II): Application to complex composite electrodes
Oswald, Steffen; Thoss, Franziska; Zier, Martin; Hoffmann, Martin; Jaumann, Tony; Herklotz, Markus; Nikolowski, Kristian; Scheiba, Frieder; Kohl, Michael; Giebeler, Lars; Mikhailova, Daria; Ehrenberg, Helmut | Journal Article |
| 2018 | Biofunktionalisierung durch interferenzbasierte Mikrostrukturen
Kunze, Tim; Zwahr, Christoph; Lasagni, Andrés-Fabián | Journal Article |
| 2018 | Biomimetic surface structuring using laser based interferometric methods
Lasagni, Andrés-Fabián; Alamri, Sabri; Aguilar-Morales, Alfredo I.; Rößler, Florian; Voisiat, Bogdan; Kunze, Tim | Journal Article |
| 2018 | Bipolarplatte für elektrochemische Zellen sowie ein Herstellungsverfahren
Giorgio, Maurizio; Roch, Teja; Stucky, Thomas; Topalski, Slavcho; Zwick, Axel | Patent |
| 2018 | Bloch surface wave enhanced biosensor for the direct detection of Angiopoietin-2 tumor biomarker in human plasma
Rizzo, Riccardo; Alvaro, Maria; Danz, Norbert; Napione, Lucia; Descrovi, Emiliano; Schmieder, Stefan; Sinibaldi, Alberto; Rana, Subinoy; Chandrawati, Rona; Munzert, Peter; Schubert, Thomas; Maillart, Emmanuel; Anopchenko, Aleksei; Rivolo, Paola; Mascioletti, Alessandro; Foerster, Erik; Sonntag, Frank; Stevens, Molly M.; Bussolino, Federico; Michelotti, Francesco | Journal Article |
| 2018 | Bloch surface wave label-free and fluorescence platform for the detection of VEGF biomarker in biological matrices
Rizzo, Riccardo; Alvaro, Maria; Danz, Norbert; Napione, Lucia; Descrovi, Emiliano; Schmieder, Stefan; Sinibaldi, Alberto; Chandrawati, Rona; Rana, Subinoy; Munzert, Peter; Schubert, Thomas; Maillart, Emmanuel; Anopchenko, Aleksei; Rivolo, Paola; Mascioletti, Alessandro; Sonntag, Frank; Stevens, Molly M.; Bussolino, Federico; Michelotti, Francesco | Journal Article |
| 2018 | Carbon
Schultrich, Bernd | Book Article |
| 2018 | Carbon ablation with ns lasers
Schultrich, Bernd | Book Article |
| 2018 | Carbon film deposition with ns lasers
Schultrich, Bernd | Book Article |
| 2018 | Coaxial laser wire deposition
Shakhverdova, Irina; Nowotny, Steffen; Thieme, Sebastian; Kubisch, Frank; Beyer, Eckhard; Leyens, Christoph | Electronic Publication, Conference Paper |
| 2018 | Combination of zinc oxide and antimony doped tin oxide nanocoatings for glazing application
Schumm, Benjamin; Abendroth, Thomas; Alajlan, Saleh A.; Almogbel, Ahmed M.; Althues, Holger; Härtel, Paul; Mäder, Gerrit; Kaskel, Stefan | Journal Article |
| 2018 | Comparative study of corrosion performance of HVOF-sprayed coatings produced using conventional and suspension WC-Co feedstock
Ahmed, Rehan R.; Vourlias, George; Algoburi, A.; Vogiatzis, C.; Chaliampalias, D.; Skolianos, S.; Berger, Lutz-Michael; Paul, S.; Faisal, Nadimul; Toma, Filofteia-Laura; Al-Anazi, Nayef; Goosen, M.F.A. | Journal Article |
| 2018 | Controlling the wettability of polycarbonate substrates by producing hierarchical structures using Direct Laser Interference Patterning
Alamri, Sabri; Aguilar-Morales, Alfredo I.; Lasagni, Andrés-Fabián | Journal Article |
| 2018 | Creep forming of very thin AlMgSc sheets for aeronautical applications
Zimmermann, Frieder; Brosius, Alexander; Beyer, Eckhard; Standfuß, Jens; Jahn, Axel; Banke, David | Journal Article, Conference Paper |
| 2018 | Detection and identification of staphylococcus aureus using magnetic particle enhanced surface plasmon spectroscopy
Rüppel, Nadine; Tröger, Vicky; Sandetskaya, Natalia; Kuhlmeier, Dirk; Schmieder, Stefan; Sonntag, Frank | Journal Article |
| 2018 | Detection of structural changes based on Mie-scattering analyses of mouse fibroblast L929 cells before and after necrosis
Baselt, Tobias; Richter, Clemens; Rudek, Florian; Nelsen, Bryan; Lasagni, Andrés-Fabián; Hartmann, Peter | Conference Paper |
| 2018 | Development and application of binary suspensions in the ternary system Cr2O3-TiO2-Al2O3 for S-HVOF spraying
Potthoff, Annegret; Kratzsch, Robert; Barbosa, Maria M.; Kulissa, Nick; Kunze, Oliver; Toma, Filofteia-Laura | Journal Article |
| 2018 | Development of the ATHENA mirror
Bavdaz, Marcos; Wille, Eric; Ayre, Mark; Ferreira, Ivo; Shortt, Brian; Fransen, Sebastiaan H.J.A.; Collon, Maximilien J.; Vacanti, Giuseppe; Barrière, Nicolas M.; Landgraf, Boris; Sforzini, Jessica; Booysen, Karin; Baren, Coen V. van; Zuknik, Karl Heinz; Della Monica Ferreira, Desireé; Massahi, Sonny; Christensen, Finn E.; Krumrey, Michael K.; Müller, Peter; Burwitz, Vadim; Pareschi, Giovanni; Spiga, Daniele; Valsecchi, Giuseppe; Vernani, Dervis; Oliver, Paul; Seidel, André | Conference Paper |
| 2018 | Diamond films
Schultrich, Bernd | Book Article |
| 2018 | Dispersion-controlled low-coherent interferometry for thin-film characterization
Preuß, M.; Taudt, Christopher; Nelsen, Bryan; Hartmann, Peter | Conference Paper |
| 2018 | Düsenaufbau für das thermische Spritzen mittels einer Suspension oder einer Präcursorlösung
Langner, Stefan; Toma, Filofteia-Laura; Trache, Richard | Patent |
| 2018 | Effect of contact area on friction force in sheet metal forming operations
Mousavi, Ali; Sperk, Theresa; Gietzelt, Tobias; Kunze, Tim; Lasagni, Andrés-Fabián; Brosius, Alexander | Conference Paper |
| 2018 | Effects of reactive interlayers in magnetic pulse welding
Bellmann, Jörg; Lueg-Althoff, Jörn; Schulze, Sebastian; Gies, Soeren; Beyer, Eckhard; Tekkaya, A. Erman | Conference Paper |
| 2018 | Effects of thermomechanical history and environment on the fatigue behavior of (β)-Ti-Nb implant alloys
Reck, André; Pilz, Stefan; Thormann, Ulrich; Alt, Volker; Gebert, Annett; Cǎlin, Mariana; Heiß, Christian; Zimmermann, Martina | Conference Paper |
| 2018 | Efficient air flow control for remote laser beam welding
Mahrle, Achim; Borkmann, Madlen; Beyer, Eckhard; Leyens, Christoph; Hustedt, Michael; Hennigs, Christian; Brodeßer, Alexander; Walter, Jürgen; Kaierle, Stefan | Journal Article |
| 2018 | Effiziente Herstellung von Kohlenstofffasern: Substitution konventioneller Ofentechnologien durch eine direkte Faserbeheizung
Mager, Alexander; Kloiber, Verena; Lehmann, Beata; Köckritz, Tilo; Roch, Julius; Großmann, Jane; Mäder, Gerrit; Beyer, Eckhard; Kaskel, Stefan | Journal Article |
| 2018 | Einfluss der Strahl- und Nahtqualität auf die Schwingfestigkeit strahlgeschweißter Stumpfnähte
Hesse, Ann-Christin; Wagner, Markus; Jahn, Axel; Nitschke-Pagel, Thomas; Hensel, Jonas; Dilger, Klaus | Journal Article |
| 2018 | Einfluss der Strahlqualität auf die Schwingfestigkeit laserstrahlgeschweißter Verbindungen
Wagner, Markus; Jahn, Axel; Leyens, Christoph; Beyer, Eckhard; Nitschke-Pagel, Thomas; Hesse, A.C.; Dilger, K. | Conference Paper |
| 2018 | Electrolyte mobility in supercapacitor electrodes - solid state NMR studies on hierarchical and narrow pore sized carbons
Fulik, Natalia; Hippauf, Felix; Leistenschneider, Desirée; Paasch, Silvia; Kaskel, Stefan; Brunner, Eike; Borchardt, Lars | Journal Article |
| 2018 | Elektrische Energiespeichereinheit mit strukturiertem Ableiterblech und Verfahren zum Strukturieren eines Ableiterblechs einer elektrischen Energiespeichereinheit
Bieda, Matthias; Langer, Maurice; Lasagni, Andrés-Fabián; Thümmler, Philipp | Patent |
| 2018 | Enhanced manufacturing possibilities using multi-materials in laser metal deposition
Brückner, Frank; Riede, Mirko; Müller, Michael; Marquardt, Franz; Willner, Robin; Seidel, André; Lopez, Elena; Leyens, Christoph; Beyer, Eckhard | Journal Article |
| 2018 | Enhanced manufacturing possibilities using multi-materials in laser metal deposition
Brueckner, F.; Riede, M.; Müller, M.; Marquardt, F.; Willner, R.; Seidel, A.; Lopez, E.; Leyens, C.; Beyer, E. | Journal Article |
| 2018 | Entwicklung einer neuartigen Plasmafiltertechnik für die Abscheidung defektarmer superharter Kohlenstoffschichten
Englberger, Gregor
: Beyer, Eckhard (Gutachter); Leyens, Christoph (Gutachter) | Dissertation |
| 2018 | Ergebnisbericht zum Verbundvorhaben: Hochproduktive generative Produktherstellung durch laserbasiertes, hybrides Fertigungskonzept
Kaubisch, Marc; Baier, Christian; Rupp, Stefan; Silvanus, Jürgen; Kuhn, Clemens Jürgen; Schreiber, Frank; Kösters, Arnd; Hipp, Jürgen; Bremer, Claus
: Nowotny, Steffen (Ed.); Thieme, Sebastian (Ed.) | Report |
| 2018 | Erweiterung der Grenzen der Hartstoffbeschichtung durch Nanostrukturierung
Kaulfuß, Frank
: Leyens, Christoph (Gutachter); Beyer, Eckhard (Gutachter) | Dissertation |
| 2018 | Evaluation of 3D-printed parts by means of high-performance computer tomography
Lopez, Elena; Felgueiras, Tomás; Grunert, Christian; Brückner, Frank; Riede, Mirko; Seidel, André; Marquardt, Axel; Leyens, Christoph; Beyer, Eckhard | Journal Article |
| 2018 | Evaluation of super hard ta-C coatings for the machining of synthetic materials
Kaulfuß, Frank; Busch, Katja; Hösel, Danny; Weihnacht, Volker; Leson, Andreas | Presentation |
| 2018 | Experimental investigation of cutting performance for different material compositions of Cr/Ni-steel with 1 μm laser radiation
Goppold, Cindy; Urlau, Franz; Pinder, Thomas; Herwig, Patrick; Lasagni, Andrés-Fabián | Journal Article |
| 2018 | Experimentally and analytically derived generalized model for the detection of liquids with suspended-core optical fibers
Nemecek, Tomas; Komanec, Matej; Nelsen, Bryan; Martan, Tomas; Suslov, Dmytro; Hartmann, Peter; Zvánovec, Stanislav | Journal Article |
| 2018 | Extended DC arc atmospheric pressure plasma source for large scale surface cleaning and functionalization
Kotte, Liliana; Mäder, Gerrit; Roch, Julius; Kaskel, Stefan | Journal Article, Conference Paper |
| 2018 | Facile metal coordination of active site imprinted nitrogen doped carbons for the conservative preparation of non-noble metal oxygen reduction electrocatalysts
Mehmood, Asad; Pampel, Jonas; Ali, Ghulam; Ha, Heungyong; Ruíz-Zepeda, Francisco; Fellinger, Tim-Patrick | Journal Article |
| 2018 | Fast cross-linking-characterization of waveguide-polymers on wafers by imaging low-coherence interferometry
Taudt, Christopher; Nelsen, Bryan; Schlögl, Sandra; Koch, Edmund; Hartmann, Peter | Journal Article, Conference Paper |
| 2018 | Femtosecond laser-induced ripple patterns for homogenous nanostructuring of pyrolytic carbon heart valve implant
Stepak, Bogusz; Dzienny, Paulina; Franke, Volker; Kunicki, Piotr; Gotszalk, Teodor; Antończak, Arkadiusz | Journal Article |
| 2018 | Filter für die Separation von unerwünschten Bestandteilen aus einem Fluidstrom
Böttcher, Gunter; Köckritz, Tilo; Popp, Andreas | Patent |
| 2018 | Flugzeugaußenflächen - wasser- und schmutzabweisend
Kunze, Tim | Journal Article |
| 2018 | Fraunhofer Institute for Material and Beam Technology. Annual Report 2017
| Annual Report |
| 2018 | Fraunhofer-Institut für Werkstoff- und Strahltechnik. Jahresbericht 2017
| Annual Report |
| 2018 | Fundamental insights into the reductive covalent cross-linking of single-walled carbon nanotubes
Schirowski, Milan; Abellán, G.; Nuin, Edurne; Pampel, Jonas; Dölle, Christian; Wedler, Vincent; Fellinger, Tim-Patrick; Spiecker, Erdmann; Hauke, Frank; Hirsch, Andreas | Journal Article |
| 2018 | Für die Herstellung von Kohlenstofffasern einsetzbares Modul sowie ein Verfahren zur Herstellung von Kohlenstofffasern
Beyer, Eckhard; Köckritz, Tilo; Lehmann, Beata | Patent |
| 2018 | Gleitverschleißverhalten metallischer Laserbeschichtungen gegen PTFE-Verbundwerkstoffdichtungen
Tuominen, Jari; Pajukoski, Henri; Vuoristo, Petri; Thieme, Sebastian; Nowotny, Steffen; Näkki, Jonne | Journal Article |
| 2018 | Growth of ta-C films
Schultrich, Bernd | Book Article |
| 2018 | Harte Kohlenstoffschichten und umweltfreundliche Schmierstoffe - eine passende Kombination
Weihnacht, Volker; Makowski, Stefan; Schaller, Frank; Leson, Andreas | Conference Paper |
| 2018 | Heat accumulation effects during ultrashort pulse laser ablation with spatially shaped beams
Mikhaylov, Dmitriy; Kiedrowski, Thomas; Lasagni, Andrés-Fabián | Journal Article |
| 2018 | Herstellung und Anwendung periodischer Mikrostrukturen auf nichtmetallischen Materialien mittels geformter Laserstrahlung
Berger, Jana
: Lasagni, Andrés (Betreuer); Brosius, Alexander (Gutachter) | Dissertation |
| 2018 | Hierarchical zeolite ZSM-58 as shape selective catalyst for methanol-to-olefins reaction
Selzer, Carolin; Biemelt, Tim; Werner, Anja; Kaskel, Stefan | Journal Article |
| 2018 | Holographic characterization and laser structuring of a microphone membrane
Nelsen, Bryan; Jacobs, P.; Taudt, Christopher; Rudek, Florian; Hartmann, Peter | Conference Paper |
| 2018 | Hybrid additive manufacturing of gamma titanium aluminide space hardware
Seidel, André; Lopez, Elena; Saha, Shuvra; Maiwald, Tim; Moritz, Juliane; Polenz, Stefan; Marquardt, Axel; Kaspar, Joerg; Finaske, Thomas; Riede, Mirko; Brückner, Frank; Leyens, Christoph | Electronic Publication, Presentation |
| 2018 | Hydrogenated amorphous carbon films (a-C:H)
Schultrich, Bernd | Book Article |
| 2018 | Hyperspectral imaging using laser excitation for fast raman and fluorescence hyperspectral imaging for sorting and quality control applications
Gruber, Florian; Wollmann, Philipp; Grählert, Wulf; Kaskel, Stefan | Journal Article |
| 2018 | Impact of temperature and deformation gradient on the joining zone formation of laser roll-bonded bimetals
Fux, Volker; Kaspar, Jörg; Berger, Andrea; Fiebiger, Thomas; Seifert, Marko; Beitelschmidt, Denise | Conference Paper |
| 2018 | Improvement of the electrical conductivity between electrode and sheet in spot welding process by direct laser interference patterning
Heilmann, Stefan; Zwahr, Christoph; Knape, Alexander; Zschetzsche, Jörg; Lasagni, Andrés-Fabián; Füssel, Uwe | Journal Article |
| 2018 | Improving the high temperature abrasion resistance of thermally sprayed Cr3C2-NiCr coatings by WC addition
Janka, Leo; Berger, Lutz-Michael; Norpoth, Jonas; Trache, Richard; Thiele, Sven; Tomastik, Christian; Matikainen, Ville; Vuoristo, Petri | Journal Article |
| 2018 | In-volume structuring of a bilayered polymer foil using direct laser interference patterning
Rößler, Florian; Günther, Katja; Lasagni, Andrés-Fabián | Journal Article |
| 2018 | Influence of deposition conditions
Schultrich, Bernd | Book Article |
| 2018 | Influence of processing parameters on surface texture homogeneity using direct laser interference patterning
Aguilar Morales, Alfredo Ismael; Alamri, Sabri; Kunze, Tim; Lasagni, Andrés-Fabián | Journal Article |
| 2018 | Influence of the flyer kinetics on magnetic pulse welding of tubes
Lueg-Althoff, Jörn; Bellmann, Jörg; Gies, Soeren; Schulze, Sebastian; Tekkaya, A. Erman; Beyer, Eckhard | Journal Article |
| 2018 | Integration beweglicher und sensorischer Elemente in additiv gefertigte Bauteile am Beispiel eines Greifers
Kordaß, Richard; Starruß, Elisa; Schnabel, Torsten; Marquardt, Franz | Conference Paper |
| 2018 | Integration of carbon allotropes into polydimethylsiloxane to control the electrical conductivity for novel fields of application
Köckritz, Tilo; Jansen, Irene; Beyer, Eckhard | Journal Article |
| 2018 | Investigations on clean and efficient remote cutting and ablating processes
Klotzbach, Annett; Schiefer, Tom; Schult, Christian; Wöllner, Michelle; Götze, Philipp; Standfuß, Jens; Kaskel, Stefan; Leyens, Christoph | Journal Article, Conference Paper |
| 2018 | Label-free monitoring of human IgG/Anti-IgG recognition using bloch surface waves on 1D photonic crystals
Sinibaldi, Alberto; Occhicone, Agostino; Munzert, Peter; Danz, Norbert; Sonntag, Frank; Michelotti, Francesco | Journal Article |
| 2018 | Laser structured surfaces for metal-plastic hybrid joined by injection molding
Gebauer, Jana; Fischer, Matthieu; Lasagni, Andrés-Fabián; Kühnert, Ines; Klotzbach, Annett | Journal Article |
| 2018 | Laser-Mehrlagen-Engstspaltschweißen zum verzugsarmen und heißrissfreien Fügen von Aluminium-Legierungen im Dickblechbereich
Brenner, Berndt; Standfuß, Jens; Dittrich, Dirk; Schedewy, Renald | Book Article |
| 2018 | Laser-Multi-Pass-Narrow-Gap-Schweißen - Eine neue Technologie zum Fügen von dickwandigen Bauteilen in Kraftwerken
Keßler, Benjamin; Brenner, Berndt; Dittrich, Dirk; Maier, G.; Oesterlin, H.; Bendjus, Beatrice | Journal Article |
| 2018 | Laserstrahlschweißen hochreflektierender Werkstoffe - neue Möglichkeiten mit 515 nm im Leistungsbereich bis 1 kW
Dittrich, Dirk; Börner, Stephan; Liebscher, Jens; Standfuß, Jens; Jahn, Axel | Conference Paper |
| 2018 | Laserstrukturierung auf Flugzeugoberflächen - Direktes Laserinterferenzverfahren erzeugt maßgeschneiderte Oberflächen
Kunze, Tim; Aguilar Morales, Alfredo Ismael; Lasagni, Andrés-Fabián; Klotzbach, Udo | Journal Article |
| 2018 | Local laser-strengthening: Customizing the forming behavior of car body steel sheets
Wagner, Markus; Jahn, Axel; Beyer, Eckhard; Balzani, Daniel | Conference Paper |
| 2018 | Lokales Laserumschmelzverfestigen von crashbelasteten Karosseriefeinblechstrukturen
Wagner, Markus
: Beyer, Eckhard (Gutachter); Leyens, Christoph (Gutachter); Balzani, Daniel (Gutachter) | Dissertation |
| 2018 | Method for high accuracy measurements of energy coupling and melting efficiency under welding conditions
Hipp, Dominik; Mahrle, Achim; Jäckel, Sebastian; Beyer, Eckhard; Leyens, Christoph; Füssel, Uwe | Journal Article |
| 2018 | Methods of vacuum arc deposition of ta-C films
Schultrich, Bernd | Book Article |
| 2018 | Micro-fabrication of high aspect ratio periodic structures on stainless steel by picosecond direct laser interference patterning
Aguilar-Morales, Alfredo I.; Alamri, Sabri; Lasagni, Andrés-Fabián | Journal Article |
| 2018 | Microstructural characteristics and performances of Cr2O3 and Cr2O3-15%TiO2 S-HVOF coatings obtained from water-based suspensions
Toma, Filofteia-Laura; Potthoff, Annegret; Barbosa, Maria Ingrid Rocha | Journal Article |
| 2018 | Mikrofluidische Vorrichtung für Zellkulturexperimente und Verwendungen hiervon
Hohenstein, Bernd; Hugo, Christian; Klotzbach, Udo; Schmieder, Florian; Sonntag, Frank | Patent |
| 2018 | Mikrofluidisches System zur Kultivierung von oder der Analyse an lebenden Zellen oder Biomolekülen sowie ein Verfahren zu seiner Herstellung
Busek, Mathias; Feller, Claudia; Grünzner, Stefan; Ihle, Martin; Partsch, Uwe | Patent |
| 2018 | Modeling and manufacturing of multilayer laue lenses for highest resolution X-ray microscopy
Kubec, Adam
: Schroer, Christian G. (Gutachter); Leson, Andreas (Gutachter) | Dissertation |
| 2018 | Multilayer Laue Lenses (MLL) with 45 mm focal length as optics for in-situ nanoindentation experiments
Kubec, Adam; Niese, Sven; Gluch, Jürgen; Rosenthal, Martin; Todt, Juraj; Keckes, Jozef; Gawlitza, Peter | Journal Article, Conference Paper |
| 2018 | Nano-Design für Makroschichten. Anwendungsperspektiven für PVD-Beschichtungen bis 100 μm Dicke
Krülle, Tim; Kaulfuß, Frank; Zimmer, Otmar; Leyens, Christoph | Journal Article, Conference Paper |
| 2018 | Nanodiamond films
Schultrich, Bernd | Book Article |
| 2018 | Nanomaterialien für elektrische Energiespeicher
Calgar, Burak; Fischer, Peter; Hagen, Markus; Tübke, Jens; Althues, Holger; Dörfler, Susanne; Guntow, Uwe; Schulz, Jochen; Endler, Ingolf; Fritsch, Marco; Meißner, Frank; Wolter, Mareike | Book Article |
| 2018 | Neuartiges Verfahren zum Laserstrahlschweißen in Mehrlagentechnik an dickwandigen Bauteilen bis zu 100 mm Blechdicke für Stahl und Aluminium
Brenner, Berndt; Dittrich, Dirk; Strohbach, Robert; Standfuß, Jens | Conference Paper |
| 2018 | Neue Materialien sichern die Innovationsfähigkeit
Leson, Andreas | Journal Article |
| 2018 | New possibilities for process control and higher efficiency at magnetic pulse welding
Bellmann, Jörg; Beyer, Eckhard; Lueg-Althoff, Jörn; Gies, Soeren; Tekkaya, A. Erman; Schulze, Sebastian; Dittrich, Steffen | Conference Paper |
| 2018 | Next Generation low weight lithium sulfur batteries
Kaskel, Stefan | Conference Paper |
| 2018 | Oberflächenmodifikation mit Hochgeschwindigkeits-Laserprozessen - Direktlaserinterferenz- / Direktlaser-Mikrostrukturieren
Klotzbach, Udo; Franke, Volker; Kunze, Tim; Lasagni, Andrés-Fabián | Conference Paper |
| 2018 | OHB initiatives in development of additive manufacturing technology for opto-mechanical and mechatronic space systems
Thiel, Markus; Senese, Samuel; Sedlmaier, Thomas; Redlich, Daniel; Mulser, Marco; Veen, Egbert Jan van deer; Pambaguian, Laurent; Rodrigues, Goncalo; Zaltron, Paolo; Brinkers, Sanneke; Aumund-Kopp, Claus; Klein, Sebastian; Domagala, Tim; Kwast, Sander; McLoughlin, Anthony; Eick, Matthias; Melzer, Christian; Brückner, Frank; Ricardo, J.; Barroqueiro, Bruno | Conference Paper |
| 2018 | On sample size effects in fracture toughness determination of Bulk Metallic Glasses
Geissler, David; Freudenberger, Jens; Wendrock, Horst; Zimmermann, Martina; Gebert, A. | Journal Article |
| 2018 | On the mechanistic role of nitrogen-doped carbon cathodes in lithium-sulfur batteries with low electrolyte weight portion
Dörfler, Susanne; Strubel, Patrick; Jaumann, Tony; Troschke, Erik; Hippauf, Felix; Kensy, Christian; Schökel, Alexander; Althues, Holger; Giebeler, Lars; Oswald, Steffen; Kaskel, Stefan | Journal Article |
| 2018 | One-step fabrication of pillar and crater-like structures on titanium using direct laser interference patterning
Zwahr, Christoph; Voisiat, Bogdan; Welle, Alexander; Günther, Denise; Lasagni, Andrés-Fabián | Journal Article |
| 2018 | Optimal planning in robotized cladding processes on generic surfaces
Magnoni, Paolo; Pedrocchi, Nicola; Thieme, Sebastian; Legnani, Giovanni; Molinari Tosatti, Lorenzo | Journal Article |
| 2018 | Optimization for high speed surface processing of metallic surfaces utilizing direct laser interference patterning
Lang, Valentin; Hoffmann, Tim; Lasagni, Andrés-Fabián | Conference Paper |
| 2018 | Parameter identification for magnetic pulse welding applications
Bellmann, Jörg; Lueg-Althoff, Jörn; Schulze, Sebastian; Gies, Soeren; Beyer, Eckhard; Tekkaya, A. Erman | Conference Paper |
| 2018 | Polyethenetetrathiolate or polytetrathiooxalate? Improved synthesis, a comparative analysis of a prominent thermoelectric polymer and implications to the charge transport mechanism
Tkachov, Roman; Stepien, Lukas; Grafe, Robert; Guskov, Olga; Kiriy, Anton; Simon, Frank; Reith, Heiko; Nielsch, Kornelius; Schierning, Gabi; Kasinathan, Deepa; Leyens, Christoph | Journal Article |
| 2018 | Porosity of LMD manufactured parts analyzed by Archmimedes method and CT
Marko, Angelina; Raute, Julius; Linaschke, Dorit; Graf, Benjamin; Rethmeier, Michael | Journal Article |
| 2018 | Potentials of precision laser processing of fiber reinforced polymer components
Franke, Volker; Gebauer, Jana | Presentation |
| 2018 | Powder particle attachment mechanisms onto liquid material
Volpp, Jörg; Prasad, H.S.; Riede, Mirko; Brückner, Frank; Kaplan, A.F.H. | Journal Article, Conference Paper |
| 2018 | Protecting sub-micrometer surface features in polymers from mechanical damage using hierarchical patterns
Rößler, Florian; Lasagni, Andrés-Fabián | Journal Article |
| 2018 | Rapid screening of zeolite acidity by thermal response measurements using InfraSORP technology
Werner, Anja; Wöllner, Michelle; Bludovsky, Paul; Leistner, Matthias; Selzer, Carolin; Kaskel, Stefan | Journal Article |
| 2018 | Reaktive Multischichtsysteme. Maßgeschneiderte Wärmequellen für Kunststoffverbindungen
Pflug, Erik; Bretschneider, Jörg; Dietrich, Georg; Zimmermann, Martina; Leson, Andreas | Journal Article |
| 2018 | Related deposition methods
Schultrich, Bernd | Book Article |
| 2018 | Remote laser cutting of open cell foams - Processes for the factory of the future
Baumann, Robert; Herwig, Patrick; Wetzig, Andreas; Beyer, Eckhard | Journal Article |
| 2018 | Schneiden von Metallschäumen mit dem Laserstrahl
Baumann, Robert
: Beyer, Eckhard (Gutachter); Bliedtner, Jens (Gutachter); Schädlich, Stefan (Betreuer) | Dissertation |
| 2018 | Selective adsorption of propene over propane on hierarchical zeolite ZSM-58
Selzer, Carolin; Werner, Anja; Kaskel, Stefan | Journal Article |
| 2018 | Significance of established TEM analysis for industry-related research on inhomogeneous and / or inside boundaries and interfaces
Zimmermann, Martina; Bretschneider, Jörg; Brenner, Berndt; Kaspar, Joerg | Journal Article, Conference Paper |
| 2018 | Special arc modes with reduced macroparticle emission
Schultrich, Bernd | Book Article |
| 2018 | Special issue featuring papers from the International Thermal Spray Conference 2017
McDonald, André; Azarmi, Fardad; Balani, Kantesh; Hussain, Tanvir; Lau, Yuk-Chiu; Li, Hua; Shinoda, Kentaro; Toma, Filofteia-Laura | Journal Article, Conference Paper |
| 2018 | Structure of amorphous carbon
Schultrich, Bernd | Book Article |
| 2018 | Study of correlation between edge roughness and gas flow characteristics in laser beam fusion cutting
Borkmann, Madlen; Mahrle, Achim; Beyer, Eckhard | Journal Article, Conference Paper |
| 2018 | Sub 25 nm focusing with a long working distance using multilayer Laue lenses
Kubec, Adam; Niese, Sven; Rosenthal, M.; Gluch, Jürgen; Burghammer, M.; Gawlitza, Peter; Keckes, J.; Leson, Andreas | Journal Article, Conference Paper |
| 2018 | Sulfur. An intermediate template for advanced silicon anode architectures
Baasner, Anne; Dörfler, Susanne; Piwko, Markus; Desilani, Sébastien; Brückner, Jan; Althues, Holger; Kaskel, Stefan | Journal Article |
| 2018 | Supercontinuum-based nondisruptive scattering analyses of mouse fibroblast L929 cells before and after necrosis
Baselt, Tobias; Kabardiadi-Virkovski, Alexander; Ruf, Daniel; Nelsen, Bryan; Lasagni, Andrés-Fabián; Hartmann, Peter | Journal Article |
| 2018 | Superhydrophobicity on hierarchical periodic surface structures fabricated via direct laser writing and direct laser interference patterning on an aluminium alloy
Cardoso, José Tiago; Aguilar Morales, Alfredo Ismael; Alamri, Sabri; Huerta-Murillo, D.; Cordovilla, Francisco; Lasagni, Andrés-Fabián; Ocana, J.L. | Journal Article |
| 2018 | Symmetric lithium sulfide - Sulfur cells: A method to study degradation mechanisms of cathode, separator and electrolyte concepts for lithium-sulfur batteries
Piwko, Markus; Weller, Christine; Hippauf, Felix; Dörfler, Susanne; Althues, Holger; Kaskel, Stefan | Journal Article |
| 2018 | Tetrahedrally Bonded Amorphous Carbon Films I
Schultrich, Bernd | Book |
| 2018 | Thermisches Spritzen mit wasserbasierten Suspensionen
Trache, Richard
: Leyens, Christoph (Gutachter); Stintz, Michael (Gutachter) | Dissertation |
| 2018 | Thermomechanical processing of in-containing β-type Ti-Nb alloys
Pilz, Stefan; Geissler, David; Cǎlin, Mariana; Eckert, Jürgen; Zimmermann, Martina; Freudenberger, Jens; Gebert, A. | Journal Article |
| 2018 | Topochemical conversion of an imine- into a thiazole-linked covalent organic framework enabling real structure analysis
Haase, Frederik; Troschke, Erik; Savasci, Gökcen; Banerjee, Tanmay; Duppel, Viola; Dörfler, Susanne; Grundei, Martin M.J.; Burow, Asbjörn M.; Ochsenfeld, Christian; Kaskel, Stefan; Lotsch, Bettina V. | Journal Article |
| 2018 | Utilizing fundamental beam-mode shaping technique for top-hat laser intensities in direct laser interference patterning
El-Khoury, Mikhael; Voisiat, Bogdan; Kunze, Tim; Lasagni, Andrés-Fabián | Journal Article |
| 2018 | Vacuum arc discharges with carbon cathodes
Schultrich, Bernd | Book Article |
| 2018 | Vacuum arc equipment for mass production of ta-C coatings
Schultrich, Bernd | Book Article |
| 2018 | Vacuum arc with particle filtering
Schultrich, Bernd | Book Article |
| 2018 | Verfahren und Vorrichtung zur generativen Herstellung von Bauteilen oder die Ausbildung von Beschichtungen auf Oberflächen von Bauteilen
Greifzu, Moritz; Roch, Aljoscha; Stepien, Lukas | Patent |
| 2018 | Verfahren zur Herstellung eines Bauteils, das mit einem Faserverbundwerk-stoff gebildet ist
Franke, Volker; Gebauer, Jana | Patent |
| 2018 | Verzugs- und energiearmes Fügen mit modernen Diodenlasern für großformatige Stahlbaustrukturen
Dittrich, Dirk; Strohbach, Robert; Jahn, Axel; Standfuß, Jens; Mayle, Jonathan | Conference Paper |
| 2018 | Virtual manufacturing and product engineering of laser-treated crash-relevant car body structures
Wagner, Markus; Jahn, Axel; Standfuß, Jens; Leyens, Christoph; Beyer, Eckhard | Presentation |
| 2018 | Vorrichtung und ein Verfahren zur Herstellung graphitisierter Kohlenstofffasern oder mit diesen Kohlenstofffasern gebildeten textilen Gebilden
Beyer, Eckhard; Kloiber, Verena; Köckritz, Tilo; Lehmann, Beata; Mager, Alexander; Schiefer, Tom | Patent |
| 2018 | Vorrichtung und ein Verfahren zur Herstellung graphitisierter Kohlenstofffasern oder mit diesen Kohlenstofffasern gebildeten textilen Gebilden
Beyer, Eckhard; Kloiber, Verena; Köckritz, Tilo; Lehmann, Beata; Mager, Alexander; Schiefer, Tom | Patent |
| 2018 | Vorrichtung und Verfahren zur Herstellung von Kohlenstofffasern oder von textilen Gebilden, die mit Kohlenstofffasern gebildet sind
Beyer, Eckhard; Köckritz, Tilo; Lehmann, Beata | Patent |
| 2018 | Vorrichtung und Verfahren zur Karbonisierung oder Graphitisierung von Kohlenstoff enthaltenden Fasern oder einem mit Kohlenstoff enthaltenden Fasern gebildeten textilen Gebilde
Kaskel, Stefan; Lehmann, Beata; Mäder, Gerrit; Köckritz, Tilo | Patent |
| 2018 | Vorrichtung zur generativen Fertigung eines dreidimensionalen Körpers in einem Pulverbett
Beyer, Eckhard; Brückner, Frank; Riede, Mirko | Patent |
| 2018 | Vorrichtung zur generativen Fertigung eines dreidimensionalen Körpers in einem Pulverbett mit mehreren Rakeln
Brückner, Frank; Riede, Mirko; Seidel, André; Willner, Robin | Patent |