Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Ab initio thermodynamics study of ambient gases reacting with amorphous carbon
Held, A.; Moseler, M.
Journal Article
2019Application of different simulation approaches to numerically optimize high-frequency mechanical impact (HFMI) post-treatment process
Ernould, C.; Schubnell, J.; Farajian, M.; Maciolek, A.; Simunek, D.; Leitner, M.; Stoschka, M.
Journal Article
2019Auswirkungen von Dehnrate und lokaler Temperaturentwicklung auf das Crashverhalten langfaserverstärkter Thermoplaste
Lienhard, Jörg
: Gumbsch, P.; Hohe, J.
Dissertation
2019Charakterisierung und Modellierung von instabilen Metamaterialien
Findeisen, C.
: Gumbsch, Peter
Dissertation
2019Dünnschichtbasierte Inline-Qualitätskontrolle für Verpackungsprozesse
Fromm, A.; Burmeister, F.; Jänchen, R.; Kiese, R.
Journal Article
2019Einfluss von Eigenspannungen und fertigungsbedingten Defekten auf die Lebensdauer dickwandiger, lasergeschweißter Rohre aus Alloy 617occ
Varfolomeev, I.; Maier, G.; Moroz, S.; Oesterlin, H.; Keßler, B.; Dittrich, D.
Conference Paper
2019Evolution of the true contact area of laser textured tungsten under dry sliding conditions
Lechthaler, B.; Ochs, G.; Mücklich, F.; Dienwiebel, M.
Journal Article
2019Experimental and theoretical 2p core-level spectra of size-selected gas-phase aluminum and silicon cluster cations: Chemical shifts, geometric structure, and coordination-dependent screening
Walter, M.; Vogel, M.; Zamudio-Bayer, V.; Lindbad, R.; Reichenbach, T.; Hirsch, K.; Langenberg, A.; Rittmann, J.; Kulesza, A.; Mitric, R.; Moseler, M.; Möller, T.; Issendorff, B. von; Lau, J.T.
Journal Article
2019Fatigue and fracture of weldments. The IBESS approach for the determination of the fatigue life and strength of weldments by fracture mechanics analysis
Zerbst, U.; Madia, M.; Schork, B.; Hensel, J.; Kucharczyk, P.; Ngoula, D.; Tchuindjang, D.; Bernhard, J.; Beckmann, C.
Book
2019Fatigue assessment of the welded joints containing process relevant imperfections
Javaheri, E.; Hemmesi, K.; Tempel, P.; Farajian, M.
Journal Article
2019Formation of icosahedron twins during initial stages of heteroepitaxial diamond nucleation and growth
Lebedev, Vadim; Yoshikawa, Taro; Giese, Christian; Kirste, Lutz; Zukauskaite, Agne; Graff, Andreas; Meyer, Frank; Burmeister, Frank; Ambacher, Oliver
Journal Article
2019Fraunhofer-Institut für Werkstoffmechanik. Jahresbericht 2018
 
Annual Report
2019Glass formation by severe plastic deformation of crystalline Cu|Zr nano-layers
Li, S.; Pastewka, L.; Gumbsch, P.
Journal Article
2019Hydrogen assisted rolling contact fatigue due to lubricant degradation and formation of white etching areas
Kürten, D; Khader, I.; Raga, R.; Casajús, P.; Winzer, N.; Kailer, A.; Spallek, R.; Scherge, M.
Journal Article
2019Influence of substrate holder configurations on bias enhanced nucleation area for diamond heteroepitaxy: Toward wafer-scale single-crystalline diamond synthesis
Yoshikawa, Taro; Herrling, David; Meyer, Frank; Burmeister, Frank; Nebel, Christoph E.; Ambacher, Oliver; Lebedev, Vadim
Journal Article
2019Lasergestützter Aufbau von kundenindividueller Fußbekleidung
Jaeger, R.; Ziegler, T.
Report
2019A mechanism-based homogenization of a dislocation source model for bending
Schmitt, S.; Stricker, M.; Gumbsch, P.; Schulz, K.
Journal Article
2019Mechano-chemical decomposition of organic friction modifiers with multiple reactive centres induces superlubricity of ta-C
Kuwahara, Takuya; Romero, Pedro A.; Makowski, Stefan; Weihnacht, Volker; Moras, Gianpietro; Moseler, Michael
Journal Article
2019Mechanochemically aminated multilayer graphene for carbon/polypropylene graft polymers and nanocomposites
Burk, L.; Walter, M.; Asmacher, A. C.; Gliem, M.; Moseler, M.; Mühlhaupt, R.
Journal Article
2019Modeling of spontaneous transformation of nitrides to Z phase accounting for stress relaxation by diffusion and interface activity
Svoboda, J.; Riedel, H.
Journal Article
2019Modellierungsansatz für die Bewertung der Rissinitiierung an Schmiededefekten
Aydin, A.; Varfolomeev, I.; Aman, C.
Conference Paper
2019Real-Time GPU-Based Digital Image Correlation Sensor for Marker-Free Strain-Controlled Fatigue Testing
Blug, Andreas; Regina, David Joel; Eckmann, Stefan; Senn, Melanie; Bertz, Alexander; Carl, Daniel; Eberl, Chris
Journal Article
2019Site-specific quasi in situ investigation of primary static recrystallization in a low carbon steel
Diehl, M.; Kertsch, L.; Traka, K.; Helm, D.; Raabe, D.
Journal Article
2019Strain rate dependent thermo-mechanical aspects of glass fiber reinforced thermoplastic based on experimental data
Lienhard, J.; Huberth, F.
Journal Article
2019Thermal management materials based on molybdenum (Mo) and copper (Cu): Elucidation of the rolling-induced evolution of thermophysical properties (e.g. CTE)
Reiser, J.; Hoffmann, A.; Hain, J.; Jäntsch, U.; Klimenkov, M.; Hohe, J.; Mrotzek, T.
Journal Article
2019The transition from static to dynamic boundary friction of a lubricated spreading and a non-spreading adhesive contact by macroscopic oscillatory tribometry
Koplin, C.; Abdel-Wahed, S.; Jaeger, R.; Scherge, M.
Journal Article
2019Tribological investigations of silicon nitride lubricated by ionic liquid aqueous solutions
Kurz, J.; Amann, T.; Kailer, A.
Journal Article
2019Wasserstoffversprödung metallischer Werkstoffe: Adsoption, Diffusion und Werkstoffeigenschaften
Wackermann, K.
Journal Article
2018Abschätzung der örtlich ertragbaren Dehnung beim statischen Festigkeitsnachweis
Varfolomeev, I.; Hohe, J.
Conference Paper
2018Adiabatic heating under various loading situations and strain rates for advanced high-strength steels
Klitschke, S.; Trondl, A.; Huberth, F.; Liewald, M.
Conference Paper
2018Alterung und Lebensdauer
Hartrott, P. von; Metzger, M.; Rockenhäuser, C.; Skrotzki, B.
Journal Article
2018Amorphous nickel nanophases inducing ferromagnetism in equiatomic Ni-Ti alloy
Chellali, M.R.; Nandam, S.H.; Li, S.; Fawey, M.H.; Moreno-Pineda, E.; Velasco, L.; Boll, T.; Pastewka, L.; Kruk, R.; Gumbsch, P.; Hahn, H.
Journal Article
2018Analysis of mechanical and chemical mechanisms on cavitation erosion-corrosion of steels in salt water using electrochemical methods
Amann, Tobias; Waidele, M.; Kailer, Andreas
Journal Article
2018Anti-spreading behavior of 1,3-diketone lubricating oil on steel surfaces
Liu, D.; Li, K.; Zhang, S.; Amann, T.; Zhang, C.; Yan, X.
Journal Article
2018Atomic-scale simulation of structure and mechanical properties of Cu1-xAgx|Ni multilayer systems
Gola, Adrien; Gumbsch, Peter; Pastewka, Lars
Journal Article
2018Bessere Werkstoffsimulation für Steckverbinder. Analyse und Bewertung des mechanischen Verhaltens von Kupferbauteilen mithilfe von FE-Simulation
Weber, Matthias; Helm, Dirk
Journal Article
2018Bestimmung der plastischen Anisotropie von Blechwerkstoffen durch ortsaufgelöste Simulationen auf Gefügeebene
Pagenkopf, Jan
: Gumbsch, Peter; Böhlke, T.
Dissertation
2018Bewertung der prozessabhängigen Werkstoffeigenschaften von additiv gefertigtem AlSi10Mg unter statischer und niederzyklischer Ermüdungsbeanspruchung
Fischer, C.; Schweizer, C.; Augenstein, E.
Journal Article
2018Bruchmechanischer Festigkeitsnachweis nach der FKM-Richtlinie - 4. erweiterte Ausgabe
Pyttel, B.; Varfolomeev, I.
Conference Paper
2018Characterization of a polyurethane adhesive and comparative calibration of different material models in LS-DYNA
Gall, M.; Sommer, S.; Zerling, F.; Wagner, T.; Schlimper, R.
Conference Paper
2018Characterization of hardness and stiffness of ceramic matrix composites through instrumented indentation test
Shi, Y.; Neubrand, A.; Koch, D.
Journal Article
2018Charge transfer excitations with range separated functionals using improved virtual orbitals
Würdemann, R.; Walter, M.
Journal Article
2018Chemical modification of fiber-matrix interfaces of glass fiber reinforced thermoplastics and methods for interface characterization
Abdul Hamid, Z.M.; Florea, M.; Fliegener, S.; Schober, M.; Hohe, J.; Rühe, J.
Journal Article
2018Comparison of long-term radii evolution of the S-phase in aluminum alloy 2618A during ageing and creep
Rockenhäuser, C.; Schriever, S.; Hartrott, P. von; Piesker, B.; Skrotzki, B.
Journal Article
2018Compositional optimization of hard-magnetic phases with machine-learning models
Möller, J.; Körner, W.; Krugel, G.; Urban, D.F.; Elsässer, C.
Journal Article
2018Compressive behavior and failure mechanisms of freestanding and composite 3D graphitic foams
Nakanishi, K.; Aria, A.; Berwind, M.; Weatherup, R.S.; Eberl, C.; Hofmann, S.; Fleck, N.
Journal Article
2018Computational assessment of the microstructure-dependent plasticity of lamellar gray cast iron - Part IV: Assessment of the yield surface after plastic loading
Metzger, M.; Seifert, T.
Journal Article
2018Confined electron and hole states in semiconducting carbon nanotube sub-10 nm artificial quantum dots
Buchs, G.; Bercioux, D.; Mayrhofer, L.; Gröning, O.
Journal Article
2018Contact mechanics of graphene-covered metal surfaces
Klemenz, A.; Gola, A.; Moseler, M.; Pastewka L.
Journal Article
2018Convergence study of the Immersed Domain method for periodic particle configurations
Schubert, R.; Kraft, T.; Bierwisch, C.
Journal Article
2018Crash and durability of aluminum and mixed steel aluminum joints made by electromagnetic pulse welding
Huberth, F.; Klitschke, S.; Gall, M.; Sommer, S.; Schnabel, K.; Baumgartner, J.
Conference Paper
2018Crash simulation of mechanical joints with automatically determined model parameters based on test results and prediction algorithms
Sommer, S.; Rochel, P.; Guenther, M.; Herfert, D.; Meschut, G.; Giese, P.
Conference Paper
2018Cyclic plasticity and low cycle fatigue damage characterisation of thermally simulated X100Q heat affected zone
Devaney, R.J.; Oesterlin, H.; O'Donoghue, P.E.; Leen, S.B.
Conference Paper
2018Daten- und prognosebasierte Generierung von Modellparametern für die Crashsimulation mechanisch gefügter Verbindungen
Rochel, P.; Sommer, S.; Günther, M.; Herfert, D.; Meschut, G.; Hein, D.; Giese, P.
Conference Paper
2018Discrete dislocation dynamics simulations of dislocation transport during sliding
Gagel, J.; Weygand, D.; Gumbsch, P.
Journal Article
2018Dynamische Be- und Entlastungsuntersuchungen zum Dehnungs- und Dehnrateneinfluss auf das Schädigungsverhalten von Werkstoffen
Hauber, M.; Lienhard, J.; Klitschke, S.; Pan, Y.; Huberth, F.
Conference Paper
2018Effect of mechanochemically functionalized multilayer graphene on the tribological properties of silicon carbide/graphene nanocomposites in aqueous environment
Zhang, W.; Schröder, C.; Schlüter, B.; Knoch, M.; Dusza, J.; Sedlak, R.; Mülhaupt, R; Kailer, A.
Journal Article
2018Effect of substrate bias on the growth behavior of iridium on A-plane sapphire using radio frequency sputtering at low temperatures
Meyer, F.; Oeser, S.; Graff, A.; Reisacher, E.; Carl, E.-R.; Fromm, A.; Wirth, M.; Groener, L.; Burmeister, F.
Journal Article
2018Der Einfluss des Mikro- und Nassstrahlens auf die Haftung und die tribologischen Eigenschaften von diamantähnlichen Kohlenstoffschichten (a-C:H) auf Stahl (100Cr6)
Kachel, Matthias
: Scherge, M.; Schulze, V.
Dissertation
2018Erweiterte Berechnungsprozeduren im Rahmen des bruchmechanischen Festigkeitsnachweises: Berücksichtigung von Constraint und thermischen Spannungen
Dittmann, F.; Varfolomeev, I.
Conference Paper
2018Erweiterte Schädingungskonzepte für thermomechanische Beanspruchung unter variablen Amplituden und plastischer Deformation
Schackert, S.; Bosch, A.; Metzger, M.; Schweizer, C.; Vormwald, M.
Report
2018Experimental investigation of damage detection and crack initiation up to the very high cycle fatigue regime
Buck, M.; Straub, T.; Eberl, C.
Book Article
2018Fatigue assessment of EMPT-welded joints using the reference radius concept
Baumgartner, J.; Schnabel, K.; Huberth, F.
Journal Article, Conference Paper
2018Fatigue life assessment of welded joints made of the stainless steel X6CrNiNb18-10 for thermomechanical and variable amplitude loading
Bosch, A.; Vormwald, M.; Schackert, S.; Schweizer, C.
Journal Article, Conference Paper
2018Fatigue life of welded joints of AlSi 347 stainless steel under thermomechanical and variable amplitude loading
Bosch, A.; Schackert, S.; Vormwald, M.; Schweizer, C.
Conference Paper
2018Fatigue lives of power plant structures due to load sequence effects originating from fluctuating production of renewable energy
Vormwald, M.; Bosch, A.; Schackert, S.; Schweizer, C.
Conference Paper
2018Fatigue strength assessment of welded mild steel joints containing bulk imperfections
Leitner, Martin; Murakami, Yukitaka; Farajian, Majid; Remes, Heikki; Stoschka, Michael
Journal Article
2018Feasibility of bent glasses with small bending radii
Rist, T.; Gremmelspacher, M.; Baab, A.
Book Article
2018Feasibility of bent glasses with small bending radii
Rist, T.; Gremmelspacher, M.; Baab, A.
Journal Article
2018Fracture ab initio: A force-based scaling law for atomistically informed continuum models
Möller, J.J.; Bitzek, E.; Janisch, R.; Hassan, H. ul; Hartmaier, A.
Journal Article
2018Fraunhofer-Institut für Werkstoffmechanik. Jahresbericht 2017
 
Annual Report
2018Füllverhalten, Schüttungszustand und resultierende Qualität keramischer Bauteile - Prozessführung und Prozessdesign von Matrizenfüllsystemen
Fries, Manfred; Kraft, T.
Report
2018Galvanically induced potentials to enable minimal tribochemical wear of stainless steel lubricated with sodium chloride and ionic liquid aqueous solution
Amann, T.; Gatti, F.; Oberle, N.; Kailer, A.; Rühe, J.
Journal Article
2018A hierarchical programmable mechanical metamaterial unit cell showing metastable shape memory
Berwind, M.F.; Kamas, A.; Eberl, C.
Journal Article
2018High-speed measurements of steel-ice friction: Experiment vs. calculation
Scherge, M.; Böttcher, R.; Spagni, A.; Marchetto, D.
Journal Article
2018High-temperature operation of the components and constructions made from newly developed chromium steels
Urban, D.
Journal Article
2018In situ digital holography for 3D topography analysis of tribological experiments
Dienwiebel, M.; Stoyanov, P.
Book Article
2018Investigation and modeling of local crack arrest in ferritic-bainitic steels under dynamic loading
Tlatlik, J.; Siegele, D.
Journal Article, Conference Paper
2018Laser-Multi-Pass-Narrow-Gap-Schweißen - Eine neue Technologie zum Fügen von dickwandigen Bauteilen in Kraftwerken
Keßler, Benjamin; Brenner, Berndt; Dittrich, Dirk; Maier, G.; Oesterlin, H.; Bendjus, Beatrice
Journal Article
2018Lebensdauerberechnung von Aluminium-Radialverdichterrädern unter Berücksichtigung der Werkstoffalterung
Rockenhäuser, C.; Hartrott, P. von; Metzger, M.; Schriever, S.; Augenstein, E.; Karlin, J.; Piesker, B.; Schweizer, C.; Skrotzki, B.
Conference Paper
2018Long term ageing of alloy 2618A
Rockenhäuser, C.; Augenstein, E.; Skrotzki, B.
Conference Paper
2018Manipulation of matter by electric and magnetic fields: Toward novel synthesis and processing routes of inorganic materials
Guillon, O.; Elsässer, C.; Gutfleisch, O.; Janek, J.; Korte-Kerzel, S.; Raabe, D.; Volkert, C.A.
Journal Article
2018Mechanical behavior of selected ceramics
Soltesz, U.; Richter, H.
Book Article
2018Mehrskalenmodellierung langfaserverstärkter Thermoplaste - Experimentelle und numerische Untersuchungen zum Deformations- und Versagensverhalten
Schulenberg, Lukas
: Seelig, T.; Böhlke, T.
Dissertation
2018Micromechanical investigation and numerical simulation of fatigue crack formation in welded joints
Beckmann, C.; Kennerknecht, T.; Preußner, J.; Farajian, M.; Luke, M.; Hohe, J.
Journal Article
2018Microstructural deformation in fatigued nanotwinned copper alloys
Heckman, N.M.; Berwind, M.; Eberl, C.; Hodge, A.M.
Journal Article
2018Microstructural investigations of polycrystalline Ti2AlN prepared by physical vapor deposition of Ti-AlN multilayers
Gröner, Lukas; Kirste, Lutz; Oeser, Sabine; Fromm, Alexander; Wirth, Marco; Meyer, Frank; Burmeister, Frank; Eberl, Chris
Journal Article
2018Microstructure evolution and deformation mechanisms during high rate and cryogenic sliding of copper
Chen, X.; Schneider, R.; Gumbsch, P.; Greiner, C.
Journal Article
2018Mikrostrukturbasierte Beschreibung: Rissentstehung in Schweißverbindungen
Beckmann, C.; Preussner, J.; Kennerknecht, T.; Farajian, M.; Luke, M.; Hohe, J.
Journal Article
2018Modeling of anisotropic behavior of aluminum profile for damage prediction
Andrieux, F.; Sun, D.-Z.
Conference Paper
2018Modellierung des mechanischen Verhaltens von Stanznietklebverbindungen mit Berücksichtigung der Prozesssimulation
Bier, Matthias Helmut
: Gumbsch, P.; Meschut, G.
Dissertation
2018Molecular probes reveal deviations from Amontons' law in multi-asperity frictional contacts
Weber, B.; Suhina, T.; Junge, T.; Pastewka, L.; Brouwer, A.M.; Bonn, D.
Journal Article
2018Neue Wege in der Simulation von Warmumformung und Wärmebehandlung aushärtbarer Kupferlegierungen
Kertsch, L.; Helm, D.
Journal Article
2018NEXT - Neue Supermagnete exzellent in Leistung und RE-Effizienz
Krugel, L.; Lehner, A.; Urban, D.; Elsässer, C.; Goll, D.; Löffler, R.; Schneider G.
Report
2018NEXT - Neue Supermagnete exzellent in Leistung und RE-Effizienz
Krugel, G.; Lehner, A.; Urban, D.; Elsässer, C.; Goll, D.; Löffler, R.; Schneider, G.
Report
2018Numerical and experimental investigation of texture shape and position in the macroscopic contact
Codrignani, A.; Frohnapfel, B.; Magagnato, F.; Schreiber, P.; Schneider, J.; Gumbsch, P.
Journal Article
2018Numerical fatigue life analysis of a high frequency mechanical impact treated industrial component based on damage mechanics models
Schubnell, J.; Farajian, M.; Däuwel, T.; Shin, Y.
Journal Article
2018Numerical welding simulation as a basis for structural integrity assessment of structures: Microstructure and residual stresses
Hemmesi, Kimiya; Farajian, Majid
Book Article
2018Operando studies reveal structural evolution with electrochemical cycling in Li-CoS2
Butala, M.M.; Doan-Nguyen, V.V.T.; Lehner, A.J.; Göbel, C.; Lumley, M.A.; Arnon, S.; Wiaderek,K.M.; Borkiewicz, O.J.; Chapman, K.W.; Chupas, P.J.; Balasubramanian, M.; Seshadri, R.
Journal Article
2018Optimized vascular network by stereolithography for tissue engineered skin
Han, Xiaoxiao; Courseaus, Julian; Khamassi, Jamel; Nottrodt, Nadine; Engelhardt, Sascha; Jacobsen, Frank; Bierwisch, Claas; Meyer, Wolfdietrich; Walter, Torsten; Weisser, Jürgen; Jaeger, Raimund; Bibb, R.; Harris, Russel
Journal Article
2018The origin of surface microstructure evolution in sliding friction
Greiner, C.; Liu, Z.; Schneider, R.; Pastewka, L.; Gumbsch, P.
Journal Article
2018Partikelbasierte Simulationen der Schmelz- und Erstarrungsdynamik in Pulverbettverfahren
Bierwisch, C.
Conference Paper
2018Plastic flow and dislocation strengthening in a dislocation density based formulation of plasticity
Sudmanns, M.; Gumbsch, P.; Schulz, K.
Journal Article
2018Prediction of the behaviour of copper alloy components under complex loadings by electro-thermomechanical coupled simulations
Weber, M.; Helm, D.
Journal Article
2018A probabilistic elasticity model for long fiber reinforced thermoplastics with uncertain microstructure
Hohe, Jörg; Paul, Hanna; Beckmann, Carla
Journal Article
2018Rateneffekte und Skaleneffekte bei der Werkstoffprüfung auf der Mikroskala
Huberth, F.; Lienhard, J.; Klitschke, S.; Bimi, P.; Ragupathi, B.; Stadtmüller, P.
Conference Paper
2018Reib- und verschleißarme Graphen-Keramik-Komposite für tribologische Anwendungen in wässrigen Medien
Schlüter, B,; Schröder, C.; Kailer, A.
Report
2018Role of oxygen functional groups in the friction of water-lubricated low-index diamond surfaces
Kuwahara,; T.; Moras, G.; Moseler, M.
Journal Article
2018The running-in of lubricated metal-metal contacts - a review on ultra-low wear systems
Scherge, M.
Journal Article
2018Screening of rare-earth-lean intermetallic 1-11 and 1-11-X compounds of YNi9In2-type for hard-magnetic applications
Körner, W.; Krugel, G.; Urban, D.F.; Elsässer, C.
Journal Article
2018Shear melting of silicon and diamond and the disappearance of the polyamorphic transition under shear
Moras, G.; Klemenz, A.; Reichenbach, T.; Gola, A.; Uetsuka, H.; Moseler, M.; Pastewka, L.
Journal Article
2018Simulation of extrusion processes of aluminum profiles with modeling of microstructure
Sun, D.-Z.; Ockewitz, A.; Trondl, A.
Conference Paper
2018Slipping domains in water-lubricated microsystems for improved load support
Savio, D.; Falk, K.; Moseler, M.
Journal Article
2018Stages in the tribologically-induced oxidation of high-purity copper
Liu, Z.; Patzig, C.; Selle, S.; Höche, T.; Gumbsch, P.; Greiner, C.
Journal Article
2018Strain rate dependent multiaxial characterization of long fiber reinforced plastic
Lienhard, J.; Schulenberg, L.
Journal Article
2018Superlubricity of 1,3-diketone based on autonomous viscosity control at various velocities
Li, Ke; Zhang, Shumin; Liu, Deshuang; Amann, Tobias; Zhang, Chenhui; Yuan, Chengqing; Luo, Jianbin
Journal Article
2018A surface tension and wetting model for the δ+-SPH scheme
Bierwisch, C.
Conference Paper
2018Temperature and loading rate dependent rupture forces from universal paths in mechanochemistry
Brügner, O.; Walter, M.
Journal Article
2018Testing and simplified modelling of deformation behaviour of battery cells
Sun, D.-Z.; Trondl, A.; Fehrenbach, C.
Conference Paper
2018A thermodynamically consistent model for elastoplasticity, recovery, recrystallization and grain coarsening
Kertsch, L.; Helm, D.
Journal Article
2018Towards a temperature dependent and probabilistic lifetime concept for nodular ductile cast iron materials undergoing isothermal and thermo-mechanical fatigue
Garcia Trelles, E.; Schweizer, C.; Eckmann, S.
Conference Paper
2018Tribological properties of high velocity suspension flame sprayed (HVSFS) ceramic coatings
Förg, A.; Konrath, G.; Popa, S.; Kailer, A.; Killinger, A.; Gadow, R.
Journal Article
2018Tribologisches Verhalten
Kailer, A.
Book Article
2018Tribology of wire arc spray coatings under the influence of regenerative fuels
Böttcher, R; Winkler, H.-J.; Dienwiebel, M.; Scherge, M.
Journal Article
2018Tuning intermolecular interaction between lignin and carbon nanotubes in fiber composites - a combined experimental and ab-initio modeling study
Badorrek, J.; Walter, M.; Laborie, M.-P.
Journal Article
2018TurboSubst - Integrales Verfahren zur systematischen Substitution von Legierungselementen am Beispiel von Turbinenrädern für Abgasturbolader
Friedmann, V.; Augenstein, E.; Zapara, M.; Metzger, M.; Kertsch, L.; Helm, D.; Schweizer, C.
Report
2018Untersuchung der Adhäsion von Thrombozyten mittels Partikelsimulation und mikrofluidischer Experimente
Khamassi, J.
: Pelz, Peter F.
Dissertation
2018Untersuchung der Möglichkeiten zur Reibungsreduzierung verbrennungsmotorischer Steuertriebe durch pneumatische Ventilfedern
Hartweg, Matthias
: Gumbsch, P.; Koch, T.
Dissertation
2018Verformung, Schädigung und Mikrostrukturentwicklung der Legierung Alloy 800H unter Ermüdungsbeanspruchung bei hohen Temperaturen
Hübsch, Oliver
: Riedel, Hermann; Heilmaier, Martin
Dissertation
2018Wear mechanisms and abrasion rates in selective laser sintering materials
Ziegler, T.; Hernandez Marquez, J.; Jaeger, R.; Phommahavong, S.
Journal Article
2018Wear resistant all-PE single-component composites via 1D nanostructure formation during melt processing
Hee, Timo; Zhong, Fan; Koplin, Christof; Jaeger, Raimund; Mühlhaupt, Rolf
Journal Article
2018{110} planar faults in strained bcc metals: Origins and implications of a commonly observed artifact of classical potentials
Möller, J.J.; Mrovec, M.; Bleskov, I.; Neugebauer, J.; Hammerschmidt, T.; Drautz, R.; Elsässer, C.; Hickel, T.; Bitzek, E.
Journal Article
2017Alkyl-substituted spiropyrans: Electronic effects, model compounds and synthesis of aliphatic main-chain copolymers
Schmidt, S.B.; Kempe, F.; Brügner, O.; Walter, M.; Sommer, M.
Journal Article
2017Analyse und Validierung von bruchmechanischen Bewertungsmethoden für dynamische Beanspruchungen
Reichert, T.; Tlatlik, J.; Böhme, W.; Siegele, D.
Report
2017Analysis of the running-in of thermal spray coatings by time-dependent stribeck maps
Linsler, D.; Kümmel, D.; Nold, E.; Dienwiebel, M.
Journal Article
2017An anisotropic elasto-plastic material model for injection-molded long fiber-reinforced thermoplastics accounting for local fiber orientation distributions
Schulenberg, L.; Seelig, T.; Andrieux, F.; Sun, D.-Z.
Journal Article
2017Application of the critical plane approach to the torsional fatigue assessment of welds considering the effect of residual stresses
Hemmesi, K.; Farajian, M.; Fatemi, A.
Journal Article
2017Assessment of fatigue crack growth under isothermal and thermomechanical fatigue loading using a time-dependent fracture mechanics approach
Schweizer, C.; Eckmann, S.
Conference Paper
2017Atomic defects and dopants in ternary Z-phase transition-metal nitrides CrMN with M=V, Nb, Ta investigated with density functional theory
Urban, D.F; Elsässer, C.
Journal Article
2017Auslegungsplattform für keramische Schraubendruckfedern
Beckert, Wieland; Stockmann, Jens; Koplin, Christof
Conference Paper
2017Characterisation of load-bearing capacity and failure behaviour of different mechanical joints under crash load of steel intensive structures
Giese, P.; Meschut, G.; Sommer, S.; Rochel, P.
Conference Paper
2017Characteristics of mechanical metamaterials based on buckling elements
Findeisen, C.; Hohe, J.; Kadic, M.; Gumbsch, P.
Journal Article
2017Characterization and modelling of soft zones around spot welds in high strength steels
Schuster, L.
Conference Paper
2017Characterization and modelling of the damage behavior of extruded aluminum profiles for crash simulations
Sun, D.Z.; Krawiec, M.; Hooputra, H.
Conference Paper
2017Characterization of fatigue crack growth, damage mechanisms and damage evolution of the nickel-based superalloys MAR-M247 CC (HIP) and CM-247 LC under thermomechanical fatigue loading using in situ optical microscopy
Eckmann, S.; Schweizer, C.
Journal Article
2017Characterization of physico-mechanical properties of Z-phase strengthened ferritic steels using internal friction measurements in the range 25 ÷ 750˚C
Kutelia, E.; Dzigrashvili, T.; Kukava, G.; Darsavelidze, I.; Kurashvili, I.; Riedel, H.; Donth, B.
Conference Paper
2017Charakterisierung hochfester Karosserieblechwerkstoffe unter quasistatischer und crashartiger Scherbelastung
Klitschke, S.; Reichert, T.; Trondl, A.; Huberth, F.
Conference Paper
2017Charakterisierung und Modellierung der Beeinflussung des Bauteilverhaltens durch Erweichungszonen an Schweißpunkten höchst- und ultrahochfester Stähle unter Crashbelastung
Sommer, S.; Schuster, L.; Schreyer, F.; Tümkaya, G.; Hein, D.
Report
2017Charakterisierung und Modellierung von mechanischen Fügeverbindungen mit einseitiger Zugänglichkeit für den profilintensiven Leichtbau unter Crashbelastung
Rochel, P.; Sommer, S.; Bier, M.; Meschut, G.; Giese, P.; Hein, D.
Report
2017Cleavage fracture assessment of transient thermo-mechanical loading situations by local approach
Tlatlik, J.; Siegele, D.
Journal Article
2017Contrast in nanoscale friction between rotational domains of graphene on Pt(111)
Chan, N.; Balakrishna, S.G; Klemenz, A.; Moseler, M.; Egberts, P.; Bennewitz, R.
Journal Article
2017Correlation of fractographic examinations with numerical calculations regarding dynamic fracture
Tlatlik, J.; Reichert, T.
Conference Paper
2017Cracking and shape deformation of cylindrical cavities during constrained sintering
Rasp, T.; Jamin, C.; Guillon, O.; Kraft, T.
Journal Article
2017CrasiFü - Daten- und prognosebasierte Generierung von Modellparametern für die Crashsimulation mechanisch gefügter Verbindungen
Günther, M.; Herfert, D.; Meschut, G.; Giese, P.; Sommer, S.; Rochel, P.
Report
2017Creep-fatigue lifetime modelling of bellows made of AISI 316
Quintus, C.; Maier, G.; Schweizer, C.; Friedmann, V.
Conference Paper
2017Customized mandibular reconstruction plates improve mechanical performance in a mandibular reconstruction model
Gutwald, R.; Jaeger, R.; Lambers, F.M.
Journal Article
2017Cyclic contact loading of Y-TZP ceramics with spherical SSiC shape under ambient air and water-lubricated conditions
Schröder, C.; Kiemle, T.; Kailer, A.; Berthold, C.; Nickel, K.G.
Journal Article
2017Damage initiation and evolution in silicon nitride under cyclic and rolling contact
Raga, Rahul
: Scherge, Matthias; Seemann, Wolfgang
Dissertation
2017Damage modelling of an aluminum cast alloy accounting for pore morphology
Andrieux, F.; Sun, D.-Z.; Burblies, A.
Conference Paper
2017Damage progression in silicon nitride undergoing non-conforming hybrid cyclic contact
Raga, R.; Khader, I.; Chlup, Z.; Kailer, A.
Journal Article
2017Daten- und prognosebasierte Generierung von Modellparametern und Erweiterung einer Softwarebenutzeroberfläche für die Crashsimulation mechanisch gefügter Verbindungen
Iwainsky, A.; Herfert, D.; Günther, M.; Sommer, S.; Rochel, P.; Meschut, G.; Hein, D.; Giese, P.
Conference Paper
2017Dependence of magnetisation and magnetocrystalline anisotropy on site distribution of alloying elements in RE-TM phases with ThMn12 structure
Butcher, T.A.; Körner, W.; Krugel, G.; Elsässer, C.
Journal Article
2017A design, mechanical rating, and load adaptation method for cellular components for additive manufacturing
Ziegler, T.; Jaeger, R.; Koplin, C.
Journal Article
2017Development of bond-order potentials for BCC transition metals
Vitek, V.; Lin, Y.-S.; Mrovec, M.
Conference Paper
2017Dislocation-density based description of the deformation of a composite material
Schulz, K.; Sudmanns, M.; Gumbsch, P.
Journal Article
2017Ductilisation of tungsten (W): Tungsten laminated composites
Reiser, J.; Garrison, L.; Greuner, H.; Hoffmann, J.; Weingärtner, T.; Jäntsch, U.; Klimenkov, M.; Franke, P.; Bonk, S.; Bonnekoh, C.; Sickinger, S.; Baumgärtner, S.; Bolich, D.; Hoffmann, M.; Ziegler, R.; Konrad, J.; Hohe, J.; Hoffmann, A.; Mrotzek, T.; Seiss, M.; Rieth, M.; Möslang, A.
Journal Article
2017Effect of surface roughness on wear rate of copper-zinc alloy under lubricated conditions
Liu, L.; Yang, C.; Dienwiebel, M.
Journal Article
2017Effective polarizability models
Fiedler, J.; Thiyam, P.; Kurumbail, A.; Burger, F.A.; Walter, M.; Persson, C.; Brevik, I.; Parsons, D.F.; Boström, M.; Buhmann, S.Y.
Journal Article
2017Effects of process parameters on the interlaminar fracture toughness of GF-PA6-tapes
Schober, M.; Kuboki, T.; Ameri. E.; Hohe, J.; Gumbsch, P.
Journal Article, Conference Paper
2017Effiziente Eigenspannungsanalyse reibrührgeschweißter Raumfahrt-Komponenten
Pfeiffer, W.; Reisacher, E.; Windisch, M.; Kahnert, M.
Journal Article
2017Einfluss von herstellungsbedingten Ungänzen auf das Werkstoffverhalten von Stahlguss
Tempel, P.; Reißig, L.; Eichheimer, C.; Farajian, M.; Luke, M.; Siegle, D.
Report
2017Enhancing the optoelectronic properties of amorphous zinc tin oxide by subgap defect passivation: A theoretical and experimental demonstration
Rucavado, E.; Jeangros, Q.; Urban, D.F.; Holovsky, J.; Remes, Z.; Duchamp, M.; Landucci, F.; Dunin-Borkowski, R.E.; Körner, W.; Elsässer, C.; Hessler-Wyser, A.; Morales-Masis, M.; Balif, C.
Journal Article
2017Entwicklung und Anwendung von SPH-Simulationsverfahren zur Untersuchung der Anisotropieentstehung beim Foliengießen
Polfer, Pit
: Gumbsch, P.; Frohnapfel, B.
Dissertation
2017European materials modelling council
Adamovic, N.; Asinari, P.; Goldbeck, G.; Hashibon, A.; Hermansson, K.; Hristova-Bogaerds, D.; Koopmans, R.; Verbrugge, T.; Wimmer, E.
Conference Paper
2017Evaluation of thickness and residual stress of shallow surface regions from diffraction profiles
Pfeiffer, W.; Reisacher, E.
Conference Paper
2017Experimental and numerical investigation of crack initiation and propagation in silicon nitride ceramic under rolling and cyclic contact
Raga, R.; Khader, I.; Chlup, Z.; Kailer, A.
Conference Paper
2017Experimental investigation and numerical simulation of fatigue crack formation in polycrystalline materials
Hohe, J.; Beckmann, C.; Kennerknecht, T.; Preußner, J.; Farajian, M.; Luke, M.
Journal Article, Conference Paper
2017Experimental investigation of the time and temperature dependent growth of fatigue cracks in Inconel 718 and mechanism based lifetime prediction
Schlesinger, M.; Seifert, T.; Preussner, J.
Journal Article, Conference Paper
2017Fatigue damage and degradation model for carbon fibre reinforced polymer materials
Abdul Hamid, Z.M.; Hohe, J.; Gall, M.; Fliegener, S.; Gumbsch, P.
Journal Article, Conference Paper
2017Fatigue strength assessment of railway axles considering small-scale tests and damage calculations
Filippini, M.; Luke, M.; Varfolomeev, I.; Regazzi, D.; Beretta, S.
Journal Article, Conference Paper
2017First principles DFT study of interstitial hydrogen and oxygen atoms in the MAX phase Ti2AlN
Colonna, F.; Elsässer, C.
Journal Article
2017First principles investigation of carbon-screw dislocation interactions in body-centered cubic metals
Lüthi, B.; Ventelon, L.; Elsässer, C.; Rodney, D.; Willaime, F.
Journal Article
2017Fracture mechanics at elevated loading rates in the ductile to brittle transition region
Mayer, U.; Reichert, T.; Tlatlik, J.
Conference Paper
2017Fraunhofer-Institut für Werkstoffmechanik. Jahresbericht 2016
 
Annual Report
2017Friction regimes of water-lubricated diamond (111): Role of interfacial ether groups and tribo-induced aromatic surface reconstructions
Kuwahara, T.; Moras, G.; Moseler, M.
Journal Article
2017Gekoppeltes Simulationsverfahren zur Sicherheitsbewertung von Mehrlagenschweißungen unter Berücksichtigung lokaler Gefügezustände sowie fertigungs- und betriebsinduzierter Vorschädigung
Genchev, G.; Doynov. N.; Varfolomeev, I.; Moroz, S.
Report
2017Influence of strain rate on the beginning of instable deformation and failure behavior from shear to multiaxial loading for a DP1000
Klitschke, S.; Huberth, F.
Conference Paper
2017Influences of initial porosity, stress triaxiality and Lode parameter on plastic deformation and ductile fracture
Ma, Y.-S.; Sun, D.-Z.; Andrieux, F.; Zhang, K.-S.
Journal Article
2017Intergranular Oxidation Effects During Dwell-Time Fatigue of High-Strength Superalloys
Krupp, U.; Wackermann, K.; Christ, H.-J.; Colliander, M.H.; Stiller, K.
Journal Article
2017Investigation of cleavage fracture under dynamic loading conditions: Part I fractographic analysis
Tlatlik, J.
Journal Article
2017Investigation of cleavage fracture under dynamic loading conditions: Part II numerical analysis
Tlatlik, J.
Journal Article
2017Investigations into the damage mechanisms of glass fiber reinforced polypropylene based on micro specimens and precise models of their microstructure
Fliegener, S.; Kennerknecht, T.; Kabel, M.
Journal Article
2017Irreversibility of dislocation motion under cyclic loading due to strain gradients
Stricker, M.; Weygand, D.; Gumbsch, P.
Journal Article
2017Large-scale anodic bonding mediated by a liquid tin solder
Ramirez, E.C.; Klemenčič, R.; Klučka, M; Lang, B; Beisel, S.; Altorfer, H.; Koebel, M.M.; Malfait, W.J.
Journal Article
2017Lifetime prediction of ceramic components - a case study on hybrid rolling contact
Khader, I.; Rasche, S.; Lube, T.; Raga, R.; Degenhardt, U.; Kailer, A.
Journal Article
2017Local residual stress analysis on deep drawn cups by means of the incremental hole-drilling method
Schuster, S.; Pagenkopf, J.; Gibmeier, J.
Conference Paper
2017Macroscopic superlow friction of steel and diamond-like carbon lubricated with a formanisotropic 1,3-diketone
Amann, T.; Kailer, A.; Oberle, N.; Li, K.; Walter, M.; List, M.; Rühe, J.
Journal Article
2017Main-Group Halide Semiconductors Derived from Perovskite: Distinguishing Chemical, Structural, and Electronic Aspects
Fabini, D.H.; Labram, J.G.; Lehner, A.J.; Bechtel, J.S.; Evans, H.A.; Van Der Ven, A.; Wudl, F.; Chabinyc, M.L.; Seshadri, R.
Journal Article
2017Marker-free GPU-based digital image correlation system for high-temperature strain-controlled fatigue measurements
Blug, Andreas; Regina, David Joel; Eckmann, Stefan; Senn, M.; Eberl, Christoph; Bertz, Alexander; Carl, Daniel
Presentation
2017A material model for prediction of fatigue damage and degradation of CFRP materials
Hohe, J.; Gall, M.; Gauch, H.; Fliegener, S.; Hamid, Z.M.B.A.
Conference Paper
2017Material-based process-chain optimization in metal forming
Morand, L.; Pagenkopf, J.; Helm, D.
Journal Article, Conference Paper
2017Materials response to glancing incidence femtosecond laser ablation
Echlin, M.P.; Titus, M.S.; Straw, M.; Gumbsch, P.; Pollock, T.M.
Journal Article
2017Microstructure of Z-Phase Strengthened Martensitic Steels
Liu, F.; Rashidi, M.; Hald, J.; Reißig, L.; Andrén, H.-O.
Journal Article
2017Microstructure, mechanical properties and friction behavior of magnetron-sputtered V-C coatings
Stoyanov, P.; Schneider, J.; Rinke, M.; Ulrich, S.; Nold, E.; Dienwiebel, M.; Stüber, M.
Journal Article
2017Mikrowellenplasmagestützte Prozessentwicklung zur Herstellung von Funktionsgradientenhartmetallen für die CVD-Diamantbeschichtung
Mee, Manuel
: Scherge, Matthias; Ulrich, Sven; Schulze, Volker
Dissertation
2017Modeling transgranular crack growth in random 3D grain structures under cyclic loading
Beckmann, C.; Hohe, J.
Journal Article
2017Modelling die filling for powders with complex rheology: A new DEM contact-model
Breinlinger, T.; Schubert, R.; Hashibon, A.; Kraft, T.
Presentation
2017Multiscale Approach for the Damage Modeling of an Aluminum Casting Alloy with Stochastic Character
Andrieux, F.; Sun, D.Z.; Burblies, A.
Journal Article
2017Neue Chromstähle für Hochtemperaturanwendungen
Urban, D.
Journal Article
2017Numerical and experimental investigations on shot-peened high-strength steel by means of hole drilling, X-ray, synchrotron and neutron diffraction analysis
Farajian, M.; Hardenacke, V.; Pfeiffer, W.; Klaus, M.; Rebelo Kornmeier, J.
Journal Article
2017Numerical Modelling of Damage Initiation and Failure of Long Fibre-Reinforced Thermoplastics
Schulenberg, L.; Sun, D.-Z.; Seelig, T.
Book Article
2017Numerical studies of welding residual stresses in tubular joints and experimental validations by means of x-ray and neutron diffraction analysis
Hemmesi, K.; Farajian, M.; Boin, M.
Journal Article
2017On the transition from static to dynamic boundary friction of lubricated PEEK for a spreading adhesive contact by macroscopic oscillatory tribometry
Abdel-Wahed, S.A.; Koplin, C.; Jaeger, R.; Scherge, M.
Journal Article
2017On the upper and lower bounds of correlation window size in digital image correlation analysis
Zhang, H.; Senn, M.; Sui, T.; Lunt, A.; Brandt, L.R.; Papadaki, C.; Ying, S.; Salvati, E.; Eberl, C.; Korsunsky, A.M.
Conference Paper
2017Probabilistic fracture mechanics of forged rotor disks
Amann, C.
Dissertation
2017Quantitative characterization of surface topography using spectral analysis
Jacobs, T; Junge, T.; Pastewka, L.
Journal Article
2017Rapidly prototyping biocompatible surfaces with designed wetting properties via photolithography and plasma polymerization
Berwind, M.F.; Hashibon, A.; Fromm, A.; Gurr, M.; Burmeister, F.; Eberl, C.
Journal Article
2017Reversible anion-driven switching of an organic 2D crystal at a solid-liquid interface
Cui, K.; Mali, K.S.; Wu, D.; Feng, X.; Müller, K.; Walter, M.; Freyter, S. de; Mertens, S.F.L.
Journal Article
2017Robocasting of carbon-alumina core-shell composites using co-extrusion
Fu, Z.; Freihart, M.; Schlordt, T.; Frey, T.; Kraft, T.; Greil, P.; Travitzky, N.
Journal Article
2017The running-in tribological behavior of Pb-free brass and its effect on microstructural evolution
Liu, L.; Zhang, Z.C.; Dienwiebel, M.
Journal Article
2017Scaling laws for implicit viscosities in smoothed particle hydrodynamics
Bierwisch, C.; Polfer, P.
Conference Paper
2017A scaling parameter for pressure losses and thermal effects in lubricant flows with viscous dissipation
Codrignani, A.; Savio, D.; Magagnato, F.; Frohnapfel, B.
Journal Article
2017Schädigungsarmes virtuelles Prozessdesign
Zapara, M.; Augenstein, E.; Helm, D.
Journal Article
2017Si3N4/graphene nanocomposites for tribological application in aqueous environments prepared by attritor milling and hot pressing
Balázsi, C.; Fogarassy, Z.; Tapasztó, O.; Kailer, A.; Schröder, C.; Parchoviansky, M.; Galusek, D.; Dusza, J.; Balázsi, K.
Journal Article, Conference Paper
2017SiC-bonded diamond materials produced by pressureless silicon infiltration
Matthey, Björn; Herrmann, Mathias; Hörner, Martin; Geldern, Maike van; Kunze, Steffen; Blug, Bernhard; Michaelis, Alexander
Journal Article
2017Sliding of UHMWPE on ice: Experiment vs. modeling
Böttcher, R.; Seidelmann, M.; Scherge, M.
Journal Article
2017Spectroscopic signatures of triplet states in acenes
Stauffert, O.; Ghassemizadeh, R.; Walter, M.
Journal Article
2017SPH simulations of magnetorheological abrasive flow machining at a microscopic scale
Mohseni-Mofidi, S.; Nutto, C.; Lagger, H.; Bierwisch, C.
Conference Paper
2017Strain rate-dependent characterization of advanced high-strength steels under various multiaxial stress states for the determination of forming and failure limits
Klitschke, S.; Huberth, F.
Conference Paper
2017Strain-based critical plane approach to predict the fatigue life of high frequency mechanical impact (HFMI)-treated welded joints depending on the material condition
Schubnell, J.; Hardenacke, V.; Farajian, M.
Journal Article
2017Study of inelastic/elastic properties and shear modulus of Z-phase strengthened ferritic steels in the range 25 - 750 ° C
Kutelia, E.; Dzigrashvili, T.; Kukava, T.; Darsavelidze, G.; Kurashvili, I.; Riedel, H.; Donth, B.
Book Article
2017Study on fatigue crack initiation and propagation from forging defects
Varfolomeev, I.; Moroz, S.; Siegele, D.; Kadau, K.; Amann, C.
Journal Article, Conference Paper
2017Substituent correlations characterized by Hammett constants in the Spiropyran-Merocyanine transition
Brügner, O.; Reichenbach, T.; Sommer, M.; Walter, M.
Journal Article
2017Surface Engineering: Lebensdauerverlängerung metallischer Komponenten durch mechanische Oberflächenbehandlung
Farajian, M.; Schubnell, J.; Luke, M.
Journal Article
2017Systematic search for lithium ion conducting compounds by screening of compositions combined with atomistic simulation
Mutter, D.; Urban, D.; Elsässer, C.
Journal Article
2017Thermodynamically consistent modelling of recrystallization and grain coarsening in precipitation‐hardened alloys
Kertsch, C.; Helm, D.
Journal Article, Conference Paper
2017Thin film thermocouples for heat conductive sealing
Jänchen, R.; Fromm, A.
Conference Paper
2017Die Übertragung von mikrostrukturellen Eigenschaften aus der diskreten Versetzungsdynamik in Kontinuumsbeschreibungen
Stricker, M.
Dissertation
2017Untersuchung der thermomechanischen Eigenschaften von additiv gefertigtem IN718 mit Hilfe von Mikrostruktursimulationen
Baiker, M.; Pagenkopf, J.; Helm, D.
Journal Article
2017Untersuchung tribologischer Systeme mit Y-TZP-Keramiken
Schröder, Christian
: Scherge, M.; Hoffmann, M.
Dissertation
2017Verbesserte Simulation des Strangpressens von Aluminiumprofilen mit Gefügeberechnung
Sun, D.-Z.; Müller, S.
Report
2017Verfahren zum lokalen Umformen einer glatten Oberfläche eines aus Glas oder einer Glaskeramik gefertigten Substrates sowie ein mit dem Verfahren hergestelltes Bedienelement
Gremmelspacher, Matthias; Gumbsch, Peter; Kübler, Rainer; Lang, Britta; Rist, Tobias
Patent
2017Virtuelle Kennwertermittlung für die Umformsimulation von Feinblechen - Teil 2
Butz, Alexander; Pagenkopf, Jan; Baiker, Maria; Silbermann, Katja; Landgrebe, Dirk
Report
2017Vorhersage der Kantenrissbildung beim Warmbandwalzen schwer umformbarer Nickelbasislegierungen
Maas, Peter
: Riedel, H.; Schulze, V.
Dissertation
2017Wälzlagerschmierung mit Kupferkolloiden
Scherge, M.; Knorring, J. von
Conference Paper
2017A wear model for silicon nitride in dry sliding contact against a nickel-base alloy
Khader, I.; Renz, A.; Kailer, A.
Journal Article
2017Wear of hardfaced valve spindles in highly loaded stationary lean-burn large bore gas engines
Renz, A.; Kürten, D.; Lehmann, O.
Journal Article
2017X-ray emission spectroscopy of proteinogenic amino acids at all relevant absorption edges
Meyer, F.; Blum, M.; Benkert, A.; Hauschild, D.; Jeyachandran, Y.L.; Wilks, R.G.; Yang, W.; Bär, M.; Heske, C.; Reinert, F.; Zharnikov, M.; Weinhardt, L.
Journal Article
2017Zum Einfluss von herstellungsbedingten Ungänzen auf das Festigkeitsverhalten von Bauteilen aus Stahlguss
Siegele, Dieter; Tempel, Peter; Eichheimer, Christian; Farajian, Majid; Veile, Ines
Journal Article