Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2020Computational assessment of the microstructure-dependent thermomechanical behaviour of AlSi12CuNiMg-T7 - methods and microstructure-based finite element analyses
Fischer, C.; Reichenbacher, A.; Metzger, M.; Schweizer, C.
Book Article
2019Ab initio thermodynamics study of ambient gases reacting with amorphous carbon
Held, A.; Moseler, M.
Journal Article
2019Application of different simulation approaches to numerically optimize high-frequency mechanical impact (HFMI) post-treatment process
Ernould, C.; Schubnell, J.; Farajian, M.; Maciolek, A.; Simunek, D.; Leitner, M.; Stoschka, M.
Journal Article
2019Auswirkungen von Dehnrate und lokaler Temperaturentwicklung auf das Crashverhalten langfaserverstärkter Thermoplaste
Lienhard, Jörg
: Gumbsch, P.; Hohe, J.
Dissertation
2019Characterization of hardness and stiffness of ceramic matrix composites through instrumented indentation test
Shi, Y.; Neubrand, A.; Koch, D.
Journal Article
2019Charakterisierung und Modellierung von instabilen Metamaterialien
Findeisen, C.
: Gumbsch, Peter
Dissertation
2019Chemical modification of fiber-matrix interfaces of glass fiber reinforced thermoplastics and methods for interface characterization
Abdul Hamid, Z.M.; Florea, M.; Fliegener, S.; Schober, M.; Hohe, J.; Rühe, J.
Journal Article
2019Computational analysis of composition-structure-property-relationships in NZP-type materials for Li-ion batteries
Mutter, D; Uraban, F.; Elsässer, C.
Journal Article
2019Dehnratenabhängiges Verformungs- und Versagensverhalten von dünnen Blechen unter Scherbelastung
Huberth, F.; Klitschke, S.; Troll, A.
Report
2019Dispersion forces in inhomogeneous planarly layered media: A one-dimensional model for effective polarizabilities
Fiedler, J.; Spallek, F.; Thiyam, P.; Persson, C.; Boström, M.; Walter, M.; Buhmann, S.Y.
Journal Article
2019Dünnschichtbasierte Inline-Qualitätskontrolle für Verpackungsprozesse
Fromm, Alexander; Burmeister, Frank; Jänchen, Ralph; Kiese, Roland
Journal Article
2019Dynamic micro-testing over a large range of strain rates for homogenous and heterogeneous local material characterization
Huberth, F.; Lienhard, J.; Ragupathi, B.; Hauber, M.
Conference Paper
2019Einfluss von Eigenspannungen und fertigungsbedingten Defekten auf die Lebensdauer dickwandiger, lasergeschweißter Rohre aus Alloy 617occ
Varfolomeev, I.; Maier, G.; Moroz, S.; Oesterlin, H.; Keßler, B.; Dittrich, D.
Conference Paper
2019Entwicklung einer Norm für die Härteprüfung als Tool zur rationellen Entwicklung, Bearbeitung und Qualitätssicherung keramischer Verbundwerkstoffe (ENVer). Abschlussbericht
Neubrand, A.; Shi, Y.; Konschak A.
Report
2019Entwicklung von galvanisch gekoppelten Gleitlagern mit niedrigen Reibungs und Verschleißwerten
Amann, T.; Chen, W.; Kailer, A.; Rühe, J.
Conference Paper
2019Evolution of the true contact area of laser textured tungsten under dry sliding conditions
Lechthaler, B.; Ochs, G.; Mücklich, F.; Dienwiebel, M.
Journal Article
2019An experimental and numerical survey into the potential of hybrid foams
Hohe, Jörg; Beckmann, Carla; Böhme, Wolfgang; Weise, Jörg; Reinfried, Matthias; Luthardt, Fabian; Rapp, Florian; Diemert, Jan
Journal Article
2019Experimental and theoretical 2p core-level spectra of size-selected gas-phase aluminum and silicon cluster cations: Chemical shifts, geometric structure, and coordination-dependent screening
Walter, M.; Vogel, M.; Zamudio-Bayer, V.; Lindbad, R.; Reichenbach, T.; Hirsch, K.; Langenberg, A.; Rittmann, J.; Kulesza, A.; Mitric, R.; Moseler, M.; Möller, T.; Issendorff, B. von; Lau, J.T.
Journal Article
2019Experimental determination of the electro-acoustic properties of thin film AlScN using surface acoustic wave resonators
Kurz, N.; Ding, A.; Urban, F.D.; Lu, Y.; Kirste, L.; Feil, N.M.; Zukauskaitė, A.; Ambacher, O.
Journal Article
2019Fatigue and fracture of weldments. The IBESS approach for the determination of the fatigue life and strength of weldments by fracture mechanics analysis
Zerbst, U.; Madia, M.; Schork, B.; Hensel, J.; Kucharczyk, P.; Ngoula, D.; Tchuindjang, D.; Bernhard, J.; Beckmann, C.
Book
2019Fatigue assessment of the welded joints containing process relevant imperfections
Javaheri, E.; Hemmesi, K.; Tempel, P.; Farajian, M.
Journal Article
2019Formation of icosahedron twins during initial stages of heteroepitaxial diamond nucleation and growth
Lebedev, Vadim; Yoshikawa, Taro; Giese, Christian; Kirste, Lutz; Zukauskaite, Agne; Graff, Andreas; Meyer, Frank; Burmeister, Frank; Ambacher, Oliver
Journal Article
2019Forschungsvorhaben "H2-Pims": Wasserstoff im Erdgas sicher transportieren
Wanzenberg, E.; Henel, M.; Brauer, H.; Tamaske, E.; Neumann, H.; Grossmann, A.; Wackermann, K.
Journal Article
2019Fraunhofer-Institut für Werkstoffmechanik. Jahresbericht 2018
 
Annual Report
2019Glass formation by severe plastic deformation of crystalline Cu|Zr nano-layers
Li, S.; Pastewka, L.; Gumbsch, P.
Journal Article
2019GPU-based digital image correlation system for real-time strain-controlled fatigue and strain field measurement
Blug, Andreas; Regina, David Joel; Eckmann, Stefan; Senn, Melanie; Eberl, Chris; Bertz, Alexander; Carl, Daniel
Conference Paper
2019Hydrogen assisted rolling contact fatigue
Kürten, D.; Kailer, A.; Khader, I.
Conference Paper
2019Hydrogen assisted rolling contact fatigue due to lubricant degradation and formation of white etching areas
Kürten, D; Khader, I.; Raga, R.; Casajús, P.; Winzer, N.; Kailer, A.; Spallek, R.; Scherge, M.
Journal Article
2019Influence of strain rate on deformation and failure behavior of sheet metals under shear loading
Klitschke, S.; Trondl, A.; Huberth, F.
Conference Paper
2019Influence of substrate holder configurations on bias enhanced nucleation area for diamond heteroepitaxy: Toward wafer-scale single-crystalline diamond synthesis
Yoshikawa, Taro; Herrling, David; Meyer, Frank; Burmeister, Frank; Nebel, Christoph E.; Ambacher, Oliver; Lebedev, Vadim
Journal Article
2019Laser multi-pass narrow-gap welding - A promising technology for joining thick-walled components of future power plants
Keßler, Benjamin; Brenner, Berndt; Dittrich, Dirk; Standfuß, Jens; Beyer, Eckhard; Leyens, Christoph; Maier, G.
Conference Paper
2019Lasergestützter Aufbau von kundenindividueller Fußbekleidung
Jaeger, R.; Ziegler, T.
Report
2019Lebensdauerbewertung geschweißter Rohrleitungen aus dem austenitischen Stahl 1.4550 mithilfe von Kurzrisswachstumsmodellen
Schackert, S.; Schweizer, C.; Vormwald, M.; Bosch, A.
Journal Article
2019Low friction of metallic multilayers by formation of a shear-induced alloy
Cihan, E.; Störmer, H.; Leiste, H.; Stüber, M.; Dienwiebel, M.
Journal Article
2019A mechanism-based homogenization of a dislocation source model for bending
Schmitt, S.; Stricker, M.; Gumbsch, P.; Schulz, K.
Journal Article
2019Mechano-chemical decomposition of organic friction modifiers with multiple reactive centres induces superlubricity of ta-C
Kuwahara, Takuya; Romero, Pedro A.; Makowski, Stefan; Weihnacht, Volker; Moras, Gianpietro; Moseler, Michael
Journal Article
2019Mechanochemically aminated multilayer graphene for carbon/polypropylene graft polymers and nanocomposites
Burk, L.; Walter, M.; Asmacher, A. C.; Gliem, M.; Moseler, M.; Mühlhaupt, R.
Journal Article
2019A mixture of experts approach to handle ambiguities in parameter identification problems in material modeling
Morand, L.; Helm, D.
Journal Article
2019Modeling of spontaneous transformation of nitrides to Z phase accounting for stress relaxation by diffusion and interface activity
Svoboda, J.; Riedel, H.
Journal Article
2019Modellierungsansatz für die Bewertung der Rissinitiierung an Schmiededefekten
Aydin, A.; Varfolomeev, I.; Aman, C.
Conference Paper
2019Das neue Wasserstofflabor am Fraunhofer IWM - Die Wirkung von Wasserstoff auf Werkstoffe beherrschen
Wackermann, K.
Journal Article
2019New materials and processes for transport applications: Going hybrid and beyond
Lehmhus, D.; Hehl, A. von; Hausmann, J.; Kayvantash, K.; Alderliesten, R.; Hohe, J.
Journal Article
2019New twists of 3D chiral metamaterials
Fernandez-Corbaton, I.; Rockstuhl, C.; Ziemke, P.; Gumbsch, P.; Albiez, A.; Schwaiger, R.; Frenzel, T.; Kadic, M.; Wegener, M.
Journal Article
2019Optical signatures of pentacene in soft rare-gas environments
Stauffert, O.; Izadnia, S.; Stienkemeier, F.; Walter, M.
Journal Article
2019Real-Time GPU-Based Digital Image Correlation Sensor for Marker-Free Strain-Controlled Fatigue Testing
Blug, Andreas; Regina, David Joel; Eckmann, Stefan; Senn, Melanie; Bertz, Alexander; Carl, Daniel; Eberl, Chris
Journal Article
2019Rheological behavior of magnetic colloids in the borderline between ferrofluids and magnetorheological fluids
Shahrivar, K.; Morillas, J.R.; Luengo, Y.; Gavilan, H.; Morales, P.; Bierwisch, C.; Vicente, J. de
Journal Article
2019Simulation of Damage Characteristics
Fischer, C.; Mittag, S.; Kuhlen, K.; Schweizer, C; Seifert, T.; Dittrich, R.; Kollmeier, H.-P.
Report
2019Site-specific quasi in situ investigation of primary static recrystallization in a low carbon steel
Diehl, M.; Kertsch, L.; Traka, K.; Helm, D.; Raabe, D.
Journal Article
2019SMiLE - Systemintegrativer Multi-Material-Leichtbau für die Elektromobilität. Schlussbericht
Baumgärtner, S.; Link, T.; Hohe, J.; Schweizer, F.; Kennerknecht, T.; Fliegener, S.; Deissenbeck, M.; Stöhr, G.; Strohmeier, U.; Maier, J.; Mayer, L.
: Deinzer, G.; Kothmann, H.
Report
2019Solids under extreme shear: Friction-mediated subsurface structural transformations
Greiner, C.; Gagel, J.; Gumbsch, P.
Journal Article
2019Stability and IR spectroscopy of zwitterionic form of β-alanine in water clusters
Ghassemizadeh, R.; Moore, B.; Momose, T.; Walter, M.
Journal Article
2019Strain rate dependent in-situ micro damage analysis
Lienhard, J.; Huberth, F.
Conference Paper
2019Strain rate dependent thermo-mechanical aspects of glass fiber reinforced thermoplastic based on experimental data
Lienhard, J.; Huberth, F.
Journal Article
2019Thermal management materials based on molybdenum (Mo) and copper (Cu): Elucidation of the rolling-induced evolution of thermophysical properties (e.g. CTE)
Reiser, J.; Hoffmann, A.; Hain, J.; Jäntsch, U.; Klimenkov, M.; Hohe, J.; Mrotzek, T.
Journal Article
2019Thin-film lubrication in the water/octyl β-d-glucopyranoside system: Macroscopic and nanoscopic tribological behavior
Chen, W.; Amann, T.; Kailer, A.; Rühe, J.
Journal Article
2019The transition from static to dynamic boundary friction of a lubricated spreading and a non-spreading adhesive contact by macroscopic oscillatory tribometry
Koplin, C.; Abdel-Wahed, S.; Jaeger, R.; Scherge, M.
Journal Article
2019Tribological investigations of silicon nitride lubricated by ionic liquid aqueous solutions
Kurz, J.; Amann, T.; Kailer, A.
Journal Article
2019Verbundprojekt SmartStream: Intelligente Bearbeitung durch die Verwendung schaltbarer Fluide
Schmiedel, C.; Bierwisch, C.; Uhlmann, E.; Menzel, P.; Mohseni-Mofidi, S.; Breinlinger, T.; Nutto, C.
Conference Paper
2019Wasserstoffversprödung metallischer Werkstoffe: Adsoption, Diffusion und Werkstoffeigenschaften
Wackermann, K.
Journal Article
2018Abschätzung der örtlich ertragbaren Dehnung beim statischen Festigkeitsnachweis
Varfolomeev, I.; Hohe, J.
Conference Paper
2018Adiabatic heating under various loading situations and strain rates for advanced high-strength steels
Klitschke, S.; Trondl, A.; Huberth, F.; Liewald, M.
Conference Paper
2018Alterung und Lebensdauer
Hartrott, P. von; Metzger, M.; Rockenhäuser, C.; Skrotzki, B.
Journal Article
2018Alterung und Lebensdauer - Lebensdauerberechnung von Aluminium-Radialverdichterrädern unter Berücksichtigung der Werkstoffalterung
Rockenhäuser, C.; Hartrott, P. von; Metzger, M.; Karlin, J.; Skrotzki, B.; Schweizer, C.
Report
2018Amorphous nickel nanophases inducing ferromagnetism in equiatomic Ni-Ti alloy
Chellali, M.R.; Nandam, S.H.; Li, S.; Fawey, M.H.; Moreno-Pineda, E.; Velasco, L.; Boll, T.; Pastewka, L.; Kruk, R.; Gumbsch, P.; Hahn, H.
Journal Article
2018Analysis of mechanical and chemical mechanisms on cavitation erosion-corrosion of steels in salt water using electrochemical methods
Amann, Tobias; Waidele, M.; Kailer, Andreas
Journal Article
2018Anti-spreading behavior of 1,3-diketone lubricating oil on steel surfaces
Liu, D.; Li, K.; Zhang, S.; Amann, T.; Zhang, C.; Yan, X.
Journal Article
2018Atomic-scale simulation of structure and mechanical properties of Cu1-xAgx|Ni multilayer systems
Gola, Adrien; Gumbsch, Peter; Pastewka, Lars
Journal Article
2018Bessere Werkstoffsimulation für Steckverbinder. Analyse und Bewertung des mechanischen Verhaltens von Kupferbauteilen mithilfe von FE-Simulation
Weber, Matthias; Helm, Dirk
Journal Article
2018Bestimmung der plastischen Anisotropie von Blechwerkstoffen durch ortsaufgelöste Simulationen auf Gefügeebene
Pagenkopf, Jan
: Gumbsch, Peter; Böhlke, T.
Dissertation
2018Bewertung der prozessabhängigen Werkstoffeigenschaften von additiv gefertigtem AlSi10Mg unter statischer und niederzyklischer Ermüdungsbeanspruchung
Fischer, C.; Schweizer, C.; Augenstein, E.
Journal Article
2018Biologisch inspirierte, umweltfreundliche Schmierstoffe auf Wasserbasis - BioSis. Abschlussbericht
Amann, T.; Chen, W.; Kailer, A.; Rühe, J.
Report
2018Bruchmechanischer Festigkeitsnachweis nach der FKM-Richtlinie - 4. erweiterte Ausgabe
Pyttel, B.; Varfolomeev, I.
Conference Paper
2018Characterization of a polyurethane adhesive and comparative calibration of different material models in LS-DYNA
Gall, M.; Sommer, S.; Zerling, F.; Wagner, T.; Schlimper, R.
Conference Paper
2018Charakterisierung und Modellierung des anisotropen Versagensverhaltens von Aluminiumwerkstoffen für die Crashsimulation
Sun, D.-Z.
Report
2018Charge transfer excitations with range separated functionals using improved virtual orbitals
Würdemann, R.; Walter, M.
Journal Article
2018Comparison of long-term radii evolution of the S-phase in aluminum alloy 2618A during ageing and creep
Rockenhäuser, C.; Schriever, S.; Hartrott, P. von; Piesker, B.; Skrotzki, B.
Journal Article
2018Compositional optimization of hard-magnetic phases with machine-learning models
Möller, J.; Körner, W.; Krugel, G.; Urban, D.F.; Elsässer, C.
Journal Article
2018Compressive behavior and failure mechanisms of freestanding and composite 3D graphitic foams
Nakanishi, K.; Aria, A.; Berwind, M.; Weatherup, R.S.; Eberl, C.; Hofmann, S.; Fleck, N.
Journal Article
2018Computational assessment of the microstructure-dependent plasticity of lamellar gray cast iron - Part IV: Assessment of the yield surface after plastic loading
Metzger, M.; Seifert, T.
Journal Article
2018Confined electron and hole states in semiconducting carbon nanotube sub-10 nm artificial quantum dots
Buchs, G.; Bercioux, D.; Mayrhofer, L.; Gröning, O.
Journal Article
2018Contact mechanics of graphene-covered metal surfaces
Klemenz, A.; Gola, A.; Moseler, M.; Pastewka L.
Journal Article
2018Convergence study of the Immersed Domain method for periodic particle configurations
Schubert, R.; Kraft, T.; Bierwisch, C.
Journal Article
2018Crash and durability of aluminum and mixed steel aluminum joints made by electromagnetic pulse welding
Huberth, F.; Klitschke, S.; Gall, M.; Sommer, S.; Schnabel, K.; Baumgartner, J.
Conference Paper
2018Crash simulation of mechanical joints with automatically determined model parameters based on test results and prediction algorithms
Sommer, S.; Rochel, P.; Guenther, M.; Herfert, D.; Meschut, G.; Giese, P.
Conference Paper
2018Cyclic plasticity and low cycle fatigue damage characterisation of thermally simulated X100Q heat affected zone
Devaney, R.J.; Oesterlin, H.; O'Donoghue, P.E.; Leen, S.B.
Conference Paper
2018Daten- und prognosebasierte Generierung von Modellparametern für die Crashsimulation mechanisch gefügter Verbindungen
Rochel, P.; Sommer, S.; Günther, M.; Herfert, D.; Meschut, G.; Hein, D.; Giese, P.
Conference Paper
2018Discrete dislocation dynamics simulations of dislocation transport during sliding
Gagel, J.; Weygand, D.; Gumbsch, P.
Journal Article
2018Dynamische Be- und Entlastungsuntersuchungen zum Dehnungs- und Dehnrateneinfluss auf das Schädigungsverhalten von Werkstoffen
Hauber, M.; Lienhard, J.; Klitschke, S.; Pan, Y.; Huberth, F.
Conference Paper
2018Effect of mechanochemically functionalized multilayer graphene on the tribological properties of silicon carbide/graphene nanocomposites in aqueous environment
Zhang, W.; Schröder, C.; Schlüter, B.; Knoch, M.; Dusza, J.; Sedlak, R.; Mülhaupt, R; Kailer, A.
Journal Article
2018Effect of substrate bias on the growth behavior of iridium on A-plane sapphire using radio frequency sputtering at low temperatures
Meyer, F.; Oeser, S.; Graff, A.; Reisacher, E.; Carl, E.-R.; Fromm, A.; Wirth, M.; Groener, L.; Burmeister, F.
Journal Article
2018Der Einfluss des Mikro- und Nassstrahlens auf die Haftung und die tribologischen Eigenschaften von diamantähnlichen Kohlenstoffschichten (a-C:H) auf Stahl (100Cr6)
Kachel, Matthias
: Scherge, M.; Schulze, V.
Dissertation
2018Entwicklung von Konzepten und Auslegungsstrategien zum punktförmigen Verbinden von innovativen, strukturell tragenden Sandwichstrukturen - PuVerSand. Abschlussbericht
Scholz, C.; Paul, H.; Sommer, S.; Rochel, P.; Wagner, S.
Report
2018Erweiterte Berechnungsprozeduren im Rahmen des bruchmechanischen Festigkeitsnachweises: Berücksichtigung von Constraint und thermischen Spannungen
Dittmann, F.; Varfolomeev, I.
Conference Paper
2018Erweiterte Schädingungskonzepte für thermomechanische Beanspruchung unter variablen Amplituden und plastischer Deformation
Schackert, S.; Bosch, A.; Metzger, M.; Schweizer, C.; Vormwald, M.
Report
2018Experimental investigation of damage detection and crack initiation up to the very high cycle fatigue regime
Buck, M.; Straub, T.; Eberl, C.
Book Article
2018Fatigue assessment of EMPT-welded joints using the reference radius concept
Baumgartner, J.; Schnabel, K.; Huberth, F.
Journal Article, Conference Paper
2018Fatigue life assessment of welded joints made of the stainless steel X6CrNiNb18-10 for thermomechanical and variable amplitude loading
Bosch, A.; Vormwald, M.; Schackert, S.; Schweizer, C.
Journal Article, Conference Paper
2018Fatigue life of welded joints of AlSi 347 stainless steel under thermomechanical and variable amplitude loading
Bosch, A.; Schackert, S.; Vormwald, M.; Schweizer, C.
Conference Paper
2018Fatigue lives of power plant structures due to load sequence effects originating from fluctuating production of renewable energy
Vormwald, M.; Bosch, A.; Schackert, S.; Schweizer, C.
Conference Paper
2018Fatigue strength assessment of welded mild steel joints containing bulk imperfections
Leitner, Martin; Murakami, Yukitaka; Farajian, Majid; Remes, Heikki; Stoschka, Michael
Journal Article
2018Feasibility of bent glasses with small bending radii
Rist, T.; Gremmelspacher, M.; Baab, A.
Book Article
2018Feasibility of bent glasses with small bending radii
Rist, T.; Gremmelspacher, M.; Baab, A.
Journal Article
2018Fracture ab initio: A force-based scaling law for atomistically informed continuum models
Möller, J.J.; Bitzek, E.; Janisch, R.; Hassan, H. ul; Hartmaier, A.
Journal Article
2018Fraunhofer-Institut für Werkstoffmechanik. Jahresbericht 2017
 
Annual Report
2018Füllverhalten, Schüttungszustand und resultierende Qualität keramischer Bauteile - Prozessführung und Prozessdesign von Matrizenfüllsystemen
Fries, Manfred; Kraft, T.
Report
2018Galvanically induced potentials to enable minimal tribochemical wear of stainless steel lubricated with sodium chloride and ionic liquid aqueous solution
Amann, T.; Gatti, F.; Oberle, N.; Kailer, A.; Rühe, J.
Journal Article
2018A hierarchical programmable mechanical metamaterial unit cell showing metastable shape memory
Berwind, M.F.; Kamas, A.; Eberl, C.
Journal Article
2018High-speed measurements of steel-ice friction: Experiment vs. calculation
Scherge, M.; Böttcher, R.; Spagni, A.; Marchetto, D.
Journal Article
2018High-temperature operation of the components and constructions made from newly developed chromium steels
Urban, D.
Journal Article
2018In situ digital holography for 3D topography analysis of tribological experiments
Dienwiebel, M.; Stoyanov, P.
Book Article
2018Investigation and modeling of local crack arrest in ferritic-bainitic steels under dynamic loading
Tlatlik, J.; Siegele, D.
Journal Article, Conference Paper
2018Kaltmassivumformung: Auch komplexe Bauteilherstellung virtuell und kostengünstig designen
Zapara, M.; Augenstein, E.
Journal Article
2018Komplexe Bauteilherstellung virtuell und kostengünstig designen
Zappara, M.; Augenstein, E.
Journal Article
2018Langlebige und verschleißfeste diamantbeschichtete Hartmetallwerkzeuge für die Produktion (DiaWerk)
Mee, M.; Blug, B.
Report
2018Laser-Multi-Pass-Narrow-Gap-Schweißen - Eine neue Technologie zum Fügen von dickwandigen Bauteilen in Kraftwerken
Keßler, Benjamin; Brenner, Berndt; Dittrich, Dirk; Maier, G.; Oesterlin, H.; Bendjus, Beatrice
Journal Article
2018Lebensdauerberechnung von Aluminium-Radialverdichterrädern unter Berücksichtigung der Werkstoffalterung
Rockenhäuser, C.; Hartrott, P. von; Metzger, M.; Schriever, S.; Augenstein, E.; Karlin, J.; Piesker, B.; Schweizer, C.; Skrotzki, B.
Conference Paper
2018Long term ageing of alloy 2618A
Rockenhäuser, C.; Augenstein, E.; Skrotzki, B.
Conference Paper
2018Manipulation of matter by electric and magnetic fields: Toward novel synthesis and processing routes of inorganic materials
Guillon, O.; Elsässer, C.; Gutfleisch, O.; Janek, J.; Korte-Kerzel, S.; Raabe, D.; Volkert, C.A.
Journal Article
2018Mechanical behavior of selected ceramics
Soltesz, U.; Richter, H.
Book Article
2018Mehrskalenmodellierung langfaserverstärkter Thermoplaste - Experimentelle und numerische Untersuchungen zum Deformations- und Versagensverhalten
Schulenberg, Lukas
: Seelig, T.; Böhlke, T.
Dissertation
2018Micromechanical investigation and numerical simulation of fatigue crack formation in welded joints
Beckmann, C.; Kennerknecht, T.; Preußner, J.; Farajian, M.; Luke, M.; Hohe, J.
Journal Article
2018Microstructural deformation in fatigued nanotwinned copper alloys
Heckman, N.M.; Berwind, M.; Eberl, C.; Hodge, A.M.
Journal Article
2018Microstructural investigations of polycrystalline Ti2AlN prepared by physical vapor deposition of Ti-AlN multilayers
Gröner, Lukas; Kirste, Lutz; Oeser, Sabine; Fromm, Alexander; Wirth, Marco; Meyer, Frank; Burmeister, Frank; Eberl, Chris
Journal Article
2018Microstructure evolution and deformation mechanisms during high rate and cryogenic sliding of copper
Chen, X.; Schneider, R.; Gumbsch, P.; Greiner, C.
Journal Article
2018Mikromechanisch basiertes Spaltbruchmodell zur Beschreibung des Bruchverhaltens unter dynamischer Belastung. Abschlussbericht
Tlatlik, J.; Siegele, D.
Report
2018Mikrostrukturbasierte Beschreibung: Rissentstehung in Schweißverbindungen
Beckmann, C.; Preussner, J.; Kennerknecht, T.; Farajian, M.; Luke, M.; Hohe, J.
Journal Article
2018Modeling of anisotropic behavior of aluminum profile for damage prediction
Andrieux, F.; Sun, D.-Z.
Conference Paper
2018Modellierung des mechanischen Verhaltens von Stanznietklebverbindungen mit Berücksichtigung der Prozesssimulation
Bier, Matthias Helmut
: Gumbsch, P.; Meschut, G.
Dissertation
2018Molecular probes reveal deviations from Amontons' law in multi-asperity frictional contacts
Weber, B.; Suhina, T.; Junge, T.; Pastewka, L.; Brouwer, A.M.; Bonn, D.
Journal Article
2018Neue Wege in der Simulation von Warmumformung und Wärmebehandlung aushärtbarer Kupferlegierungen
Kertsch, L.; Helm, D.
Journal Article
2018NEXT - Neue Supermagnete exzellent in Leistung und RE-Effizienz
Krugel, L.; Lehner, A.; Urban, D.; Elsässer, C.; Goll, D.; Löffler, R.; Schneider G.
Report
2018NEXT - Neue Supermagnete exzellent in Leistung und RE-Effizienz
Krugel, G.; Lehner, A.; Urban, D.; Elsässer, C.; Goll, D.; Löffler, R.; Schneider, G.
Report
2018Numerical and experimental investigation of texture shape and position in the macroscopic contact
Codrignani, A.; Frohnapfel, B.; Magagnato, F.; Schreiber, P.; Schneider, J.; Gumbsch, P.
Journal Article
2018Numerical fatigue life analysis of a high frequency mechanical impact treated industrial component based on damage mechanics models
Schubnell, J.; Farajian, M.; Däuwel, T.; Shin, Y.
Journal Article
2018Numerical welding simulation as a basis for structural integrity assessment of structures: Microstructure and residual stresses
Hemmesi, Kimiya; Farajian, Majid
Book Article
2018On the transferability of probabilistic fracture mechanics results for scaled 50Hz and 60Hz heavy duty gas turbine rotor disks
Amann, C.; Kadau, K.; Gumbsch, P.
Conference Paper
2018Operando studies reveal structural evolution with electrochemical cycling in Li-CoS2
Butala, M.M.; Doan-Nguyen, V.V.T.; Lehner, A.J.; Göbel, C.; Lumley, M.A.; Arnon, S.; Wiaderek,K.M.; Borkiewicz, O.J.; Chapman, K.W.; Chupas, P.J.; Balasubramanian, M.; Seshadri, R.
Journal Article
2018Optimized vascular network by stereolithography for tissue engineered skin
Han, Xiaoxiao; Courseaus, Julian; Khamassi, Jamel; Nottrodt, Nadine; Engelhardt, Sascha; Jacobsen, Frank; Bierwisch, Claas; Meyer, Wolfdietrich; Walter, Torsten; Weisser, Jürgen; Jaeger, Raimund; Bibb, R.; Harris, Russel
Journal Article
2018The origin of surface microstructure evolution in sliding friction
Greiner, C.; Liu, Z.; Schneider, R.; Pastewka, L.; Gumbsch, P.
Journal Article
2018Partikelbasierte Simulationen der Schmelz- und Erstarrungsdynamik in Pulverbettverfahren
Bierwisch, C.
Conference Paper
2018Plastic flow and dislocation strengthening in a dislocation density based formulation of plasticity
Sudmanns, M.; Gumbsch, P.; Schulz, K.
Journal Article
2018Prediction of the behaviour of copper alloy components under complex loadings by electro-thermomechanical coupled simulations
Weber, M.; Helm, D.
Journal Article
2018A probabilistic elasticity model for long fiber reinforced thermoplastics with uncertain microstructure
Hohe, Jörg; Paul, Hanna; Beckmann, Carla
Journal Article
2018Rateneffekte und Skaleneffekte bei der Werkstoffprüfung auf der Mikroskala
Huberth, F.; Lienhard, J.; Klitschke, S.; Bimi, P.; Ragupathi, B.; Stadtmüller, P.
Conference Paper
2018Reib- und verschleißarme Graphen-Keramik-Komposite für tribologische Anwendungen in wässrigen Medien
Schlüter, B,; Schröder, C.; Kailer, A.
Report
2018Role of oxygen functional groups in the friction of water-lubricated low-index diamond surfaces
Kuwahara,; T.; Moras, G.; Moseler, M.
Journal Article
2018The running-in of lubricated metal-metal contacts - a review on ultra-low wear systems
Scherge, M.
Journal Article
2018Screening of rare-earth-lean intermetallic 1-11 and 1-11-X compounds of YNi9In2-type for hard-magnetic applications
Körner, W.; Krugel, G.; Urban, D.F.; Elsässer, C.
Journal Article
2018Shear melting of silicon and diamond and the disappearance of the polyamorphic transition under shear
Moras, G.; Klemenz, A.; Reichenbach, T.; Gola, A.; Uetsuka, H.; Moseler, M.; Pastewka, L.
Journal Article
2018Simulation of extrusion processes of aluminum profiles with modeling of microstructure
Sun, D.-Z.; Ockewitz, A.; Trondl, A.
Conference Paper
2018Slipping domains in water-lubricated microsystems for improved load support
Savio, D.; Falk, K.; Moseler, M.
Journal Article
2018Stages in the tribologically-induced oxidation of high-purity copper
Liu, Z.; Patzig, C.; Selle, S.; Höche, T.; Gumbsch, P.; Greiner, C.
Journal Article
2018Strain rate dependent multiaxial characterization of long fiber reinforced plastic
Lienhard, J.; Schulenberg, L.
Journal Article
2018Superlubricity of 1,3-diketone based on autonomous viscosity control at various velocities
Li, Ke; Zhang, Shumin; Liu, Deshuang; Amann, Tobias; Zhang, Chenhui; Yuan, Chengqing; Luo, Jianbin
Journal Article
2018A surface tension and wetting model for the δ+-SPH scheme
Bierwisch, C.
Conference Paper
2018Temperature and loading rate dependent rupture forces from universal paths in mechanochemistry
Brügner, O.; Walter, M.
Journal Article
2018Testing and simplified modelling of deformation behaviour of battery cells
Sun, D.-Z.; Trondl, A.; Fehrenbach, C.
Conference Paper
2018A thermodynamically consistent model for elastoplasticity, recovery, recrystallization and grain coarsening
Kertsch, L.; Helm, D.
Journal Article
2018Towards a temperature dependent and probabilistic lifetime concept for nodular ductile cast iron materials undergoing isothermal and thermo-mechanical fatigue
Garcia Trelles, E.; Schweizer, C.; Eckmann, S.
Conference Paper
2018Tribological properties of high velocity suspension flame sprayed (HVSFS) ceramic coatings
Förg, A.; Konrath, G.; Popa, S.; Kailer, A.; Killinger, A.; Gadow, R.
Journal Article
2018Tribologisch und elektrisch induzierte Effekte im Kommutator-Bürste-Kontakt im permanent erregten Gleichstrommotor
Fakih, Bashir
: Berger, Frank; Dienwiebel, Martin; Müklich, Frank
Dissertation
2018Tribologisches Verhalten
Kailer, A.
Book Article
2018Tribology of wire arc spray coatings under the influence of regenerative fuels
Böttcher, R; Winkler, H.-J.; Dienwiebel, M.; Scherge, M.
Journal Article
2018Tuning intermolecular interaction between lignin and carbon nanotubes in fiber composites - a combined experimental and ab-initio modeling study
Badorrek, J.; Walter, M.; Laborie, M.-P.
Journal Article
2018TurboSubst - Integrales Verfahren zur systematischen Substitution von Legierungselementen am Beispiel von Turbinenrädern für Abgasturbolader
Friedmann, V.; Augenstein, E.; Zapara, M.; Metzger, M.; Kertsch, L.; Helm, D.; Schweizer, C.
Report
2018Untersuchung der Adhäsion von Thrombozyten mittels Partikelsimulation und mikrofluidischer Experimente
Khamassi, J.
: Pelz, Peter F.
Dissertation
2018Untersuchung der Möglichkeiten zur Reibungsreduzierung verbrennungsmotorischer Steuertriebe durch pneumatische Ventilfedern
Hartweg, Matthias
: Gumbsch, P.; Koch, T.
Dissertation
2018Verformung, Schädigung und Mikrostrukturentwicklung der Legierung Alloy 800H unter Ermüdungsbeanspruchung bei hohen Temperaturen
Hübsch, Oliver
: Riedel, Hermann; Heilmaier, Martin
Dissertation
2018Wear mechanisms and abrasion rates in selective laser sintering materials
Ziegler, T.; Hernandez Marquez, J.; Jaeger, R.; Phommahavong, S.
Journal Article
2018Wear resistant all-PE single-component composites via 1D nanostructure formation during melt processing
Hee, Timo; Zhong, Fan; Koplin, Christof; Jaeger, Raimund; Mühlhaupt, Rolf
Journal Article
2018Werkstoffcharakterisierung - Rateneffekte, Skaleneffekte, Schädigung, Instabilität und adiabatische Erwärmung
Huberth, F.; Sun, D.-Z.; Klitschke, S.; Trondl, A.; Lienhard, J.; Hauber, M.; Discher, D.; Sommer, S.
Conference Paper
2018{110} planar faults in strained bcc metals: Origins and implications of a commonly observed artifact of classical potentials
Möller, J.J.; Mrovec, M.; Bleskov, I.; Neugebauer, J.; Hammerschmidt, T.; Drautz, R.; Elsässer, C.; Hickel, T.; Bitzek, E.
Journal Article
2017Alkyl-substituted spiropyrans: Electronic effects, model compounds and synthesis of aliphatic main-chain copolymers
Schmidt, S.B.; Kempe, F.; Brügner, O.; Walter, M.; Sommer, M.
Journal Article
2017Analyse und Validierung von bruchmechanischen Bewertungsmethoden für dynamische Beanspruchungen
Reichert, T.; Tlatlik, J.; Böhme, W.; Siegele, D.
Report
2017Analysis of the running-in of thermal spray coatings by time-dependent stribeck maps
Linsler, D.; Kümmel, D.; Nold, E.; Dienwiebel, M.
Journal Article
2017An anisotropic elasto-plastic material model for injection-molded long fiber-reinforced thermoplastics accounting for local fiber orientation distributions
Schulenberg, L.; Seelig, T.; Andrieux, F.; Sun, D.-Z.
Journal Article
2017Application of the critical plane approach to the torsional fatigue assessment of welds considering the effect of residual stresses
Hemmesi, K.; Farajian, M.; Fatemi, A.
Journal Article
2017Assessment of fatigue crack growth under isothermal and thermomechanical fatigue loading using a time-dependent fracture mechanics approach
Schweizer, C.; Eckmann, S.
Conference Paper
2017Atomic defects and dopants in ternary Z-phase transition-metal nitrides CrMN with M=V, Nb, Ta investigated with density functional theory
Urban, D.F; Elsässer, C.
Journal Article
2017Auslegungsplattform für keramische Schraubendruckfedern
Beckert, Wieland; Stockmann, Jens; Koplin, Christof
Conference Paper
2017Characterisation of load-bearing capacity and failure behaviour of different mechanical joints under crash load of steel intensive structures
Giese, P.; Meschut, G.; Sommer, S.; Rochel, P.
Conference Paper
2017Characteristics of mechanical metamaterials based on buckling elements
Findeisen, C.; Hohe, J.; Kadic, M.; Gumbsch, P.
Journal Article
2017Characterization and modelling of soft zones around spot welds in high strength steels
Schuster, L.
Conference Paper
2017Characterization and modelling of the damage behavior of extruded aluminum profiles for crash simulations
Sun, D.Z.; Krawiec, M.; Hooputra, H.
Conference Paper
2017Characterization of fatigue crack growth, damage mechanisms and damage evolution of the nickel-based superalloys MAR-M247 CC (HIP) and CM-247 LC under thermomechanical fatigue loading using in situ optical microscopy
Eckmann, S.; Schweizer, C.
Journal Article
2017Characterization of physico-mechanical properties of Z-phase strengthened ferritic steels using internal friction measurements in the range 25 ÷ 750˚C
Kutelia, E.; Dzigrashvili, T.; Kukava, G.; Darsavelidze, I.; Kurashvili, I.; Riedel, H.; Donth, B.
Conference Paper
2017Charakterisierung hochfester Karosserieblechwerkstoffe unter quasistatischer und crashartiger Scherbelastung
Klitschke, S.; Reichert, T.; Trondl, A.; Huberth, F.
Conference Paper
2017Charakterisierung und Modellierung der Beeinflussung des Bauteilverhaltens durch Erweichungszonen an Schweißpunkten höchst- und ultrahochfester Stähle unter Crashbelastung
Sommer, S.; Schuster, L.; Schreyer, F.; Tümkaya, G.; Hein, D.
Report
2017Charakterisierung und Modellierung von mechanischen Fügeverbindungen mit einseitiger Zugänglichkeit für den profilintensiven Leichtbau unter Crashbelastung
Rochel, P.; Sommer, S.; Bier, M.; Meschut, G.; Giese, P.; Hein, D.
Report
2017Cleavage fracture assessment of transient thermo-mechanical loading situations by local approach
Tlatlik, J.; Siegele, D.
Journal Article
2017Contrast in nanoscale friction between rotational domains of graphene on Pt(111)
Chan, N.; Balakrishna, S.G; Klemenz, A.; Moseler, M.; Egberts, P.; Bennewitz, R.
Journal Article
2017Correlation of fractographic examinations with numerical calculations regarding dynamic fracture
Tlatlik, J.; Reichert, T.
Conference Paper
2017Cracking and shape deformation of cylindrical cavities during constrained sintering
Rasp, T.; Jamin, C.; Guillon, O.; Kraft, T.
Journal Article
2017CrasiFü - Daten- und prognosebasierte Generierung von Modellparametern für die Crashsimulation mechanisch gefügter Verbindungen
Günther, M.; Herfert, D.; Meschut, G.; Giese, P.; Sommer, S.; Rochel, P.
Report
2017Creep-fatigue lifetime modelling of bellows made of AISI 316
Quintus, C.; Maier, G.; Schweizer, C.; Friedmann, V.
Conference Paper
2017Customized mandibular reconstruction plates improve mechanical performance in a mandibular reconstruction model
Gutwald, R.; Jaeger, R.; Lambers, F.M.
Journal Article
2017Cyclic contact loading of Y-TZP ceramics with spherical SSiC shape under ambient air and water-lubricated conditions
Schröder, C.; Kiemle, T.; Kailer, A.; Berthold, C.; Nickel, K.G.
Journal Article
2017Damage initiation and evolution in silicon nitride under cyclic and rolling contact
Raga, Rahul
: Scherge, Matthias; Seemann, Wolfgang
Dissertation
2017Damage modelling of an aluminum cast alloy accounting for pore morphology
Andrieux, F.; Sun, D.-Z.; Burblies, A.
Conference Paper
2017Damage progression in silicon nitride undergoing non-conforming hybrid cyclic contact
Raga, R.; Khader, I.; Chlup, Z.; Kailer, A.
Journal Article
2017Daten- und prognosebasierte Generierung von Modellparametern und Erweiterung einer Softwarebenutzeroberfläche für die Crashsimulation mechanisch gefügter Verbindungen
Iwainsky, A.; Herfert, D.; Günther, M.; Sommer, S.; Rochel, P.; Meschut, G.; Hein, D.; Giese, P.
Conference Paper
2017Dependence of magnetisation and magnetocrystalline anisotropy on site distribution of alloying elements in RE-TM phases with ThMn12 structure
Butcher, T.A.; Körner, W.; Krugel, G.; Elsässer, C.
Journal Article
2017A design, mechanical rating, and load adaptation method for cellular components for additive manufacturing
Ziegler, T.; Jaeger, R.; Koplin, C.
Journal Article
2017Development of bond-order potentials for BCC transition metals
Vitek, V.; Lin, Y.-S.; Mrovec, M.
Conference Paper
2017Dislocation-density based description of the deformation of a composite material
Schulz, K.; Sudmanns, M.; Gumbsch, P.
Journal Article
2017Ductilisation of tungsten (W): Tungsten laminated composites
Reiser, J.; Garrison, L.; Greuner, H.; Hoffmann, J.; Weingärtner, T.; Jäntsch, U.; Klimenkov, M.; Franke, P.; Bonk, S.; Bonnekoh, C.; Sickinger, S.; Baumgärtner, S.; Bolich, D.; Hoffmann, M.; Ziegler, R.; Konrad, J.; Hohe, J.; Hoffmann, A.; Mrotzek, T.; Seiss, M.; Rieth, M.; Möslang, A.
Journal Article
2017Effect of surface roughness on wear rate of copper-zinc alloy under lubricated conditions
Liu, L.; Yang, C.; Dienwiebel, M.
Journal Article
2017Effective polarizability models
Fiedler, J.; Thiyam, P.; Kurumbail, A.; Burger, F.A.; Walter, M.; Persson, C.; Brevik, I.; Parsons, D.F.; Boström, M.; Buhmann, S.Y.
Journal Article
2017Effects of process parameters on the interlaminar fracture toughness of GF-PA6-tapes
Schober, M.; Kuboki, T.; Ameri. E.; Hohe, J.; Gumbsch, P.
Journal Article, Conference Paper
2017Effiziente Eigenspannungsanalyse reibrührgeschweißter Raumfahrt-Komponenten
Pfeiffer, W.; Reisacher, E.; Windisch, M.; Kahnert, M.
Journal Article
2017Einfluss von herstellungsbedingten Ungänzen auf das Werkstoffverhalten von Stahlguss
Tempel, P.; Reißig, L.; Eichheimer, C.; Farajian, M.; Luke, M.; Siegle, D.
Report
2017Enhancing the optoelectronic properties of amorphous zinc tin oxide by subgap defect passivation: A theoretical and experimental demonstration
Rucavado, E.; Jeangros, Q.; Urban, D.F.; Holovsky, J.; Remes, Z.; Duchamp, M.; Landucci, F.; Dunin-Borkowski, R.E.; Körner, W.; Elsässer, C.; Hessler-Wyser, A.; Morales-Masis, M.; Balif, C.
Journal Article
2017Entwicklung und Anwendung von SPH-Simulationsverfahren zur Untersuchung der Anisotropieentstehung beim Foliengießen
Polfer, Pit
: Gumbsch, P.; Frohnapfel, B.
Dissertation
2017European materials modelling council
Adamovic, N.; Asinari, P.; Goldbeck, G.; Hashibon, A.; Hermansson, K.; Hristova-Bogaerds, D.; Koopmans, R.; Verbrugge, T.; Wimmer, E.
Conference Paper
2017Evaluation of thickness and residual stress of shallow surface regions from diffraction profiles
Pfeiffer, W.; Reisacher, E.
Conference Paper
2017Experimental and numerical investigation of crack initiation and propagation in silicon nitride ceramic under rolling and cyclic contact
Raga, R.; Khader, I.; Chlup, Z.; Kailer, A.
Conference Paper
2017Experimental investigation and numerical simulation of fatigue crack formation in polycrystalline materials
Hohe, J.; Beckmann, C.; Kennerknecht, T.; Preußner, J.; Farajian, M.; Luke, M.
Journal Article, Conference Paper
2017Experimental investigation of the time and temperature dependent growth of fatigue cracks in Inconel 718 and mechanism based lifetime prediction
Schlesinger, M.; Seifert, T.; Preussner, J.
Journal Article, Conference Paper
2017Fatigue damage and degradation model for carbon fibre reinforced polymer materials
Abdul Hamid, Z.M.; Hohe, J.; Gall, M.; Fliegener, S.; Gumbsch, P.
Journal Article, Conference Paper
2017Fatigue strength assessment of railway axles considering small-scale tests and damage calculations
Filippini, M.; Luke, M.; Varfolomeev, I.; Regazzi, D.; Beretta, S.
Journal Article, Conference Paper
2017First principles DFT study of interstitial hydrogen and oxygen atoms in the MAX phase Ti2AlN
Colonna, F.; Elsässer, C.
Journal Article
2017First principles investigation of carbon-screw dislocation interactions in body-centered cubic metals
Lüthi, B.; Ventelon, L.; Elsässer, C.; Rodney, D.; Willaime, F.
Journal Article
2017Fracture mechanics at elevated loading rates in the ductile to brittle transition region
Mayer, U.; Reichert, T.; Tlatlik, J.
Conference Paper
2017Fraunhofer-Institut für Werkstoffmechanik. Jahresbericht 2016
 
Annual Report
2017Friction regimes of water-lubricated diamond (111): Role of interfacial ether groups and tribo-induced aromatic surface reconstructions
Kuwahara, T.; Moras, G.; Moseler, M.
Journal Article
2017Gekoppeltes Simulationsverfahren zur Sicherheitsbewertung von Mehrlagenschweißungen unter Berücksichtigung lokaler Gefügezustände sowie fertigungs- und betriebsinduzierter Vorschädigung
Genchev, G.; Doynov. N.; Varfolomeev, I.; Moroz, S.
Report
2017Herstellung, Modellierung und Bewertung nanostrukturierter hochtemperaturstabiler Schichten für Umformwerkzeuge - Nanowerk. Abschlussbericht
Kailer, A.; Moser, T.; Walter, M.; Held, A.; Keunecke, M.; Stein, C.; Bewilogua, K.
Report
2017Influence of strain rate on the beginning of instable deformation and failure behavior from shear to multiaxial loading for a DP1000
Klitschke, S.; Huberth, F.
Conference Paper
2017Influences of initial porosity, stress triaxiality and Lode parameter on plastic deformation and ductile fracture
Ma, Y.-S.; Sun, D.-Z.; Andrieux, F.; Zhang, K.-S.
Journal Article
2017Intergranular Oxidation Effects During Dwell-Time Fatigue of High-Strength Superalloys
Krupp, U.; Wackermann, K.; Christ, H.-J.; Colliander, M.H.; Stiller, K.
Journal Article
2017Investigation of cleavage fracture under dynamic loading conditions: Part I fractographic analysis
Tlatlik, J.
Journal Article
2017Investigation of cleavage fracture under dynamic loading conditions: Part II numerical analysis
Tlatlik, J.
Journal Article
2017Investigations into the damage mechanisms of glass fiber reinforced polypropylene based on micro specimens and precise models of their microstructure
Fliegener, S.; Kennerknecht, T.; Kabel, M.
Journal Article
2017Irreversibility of dislocation motion under cyclic loading due to strain gradients
Stricker, M.; Weygand, D.; Gumbsch, P.
Journal Article
2017Large-scale anodic bonding mediated by a liquid tin solder
Ramirez, E.C.; Klemenčič, R.; Klučka, M; Lang, B; Beisel, S.; Altorfer, H.; Koebel, M.M.; Malfait, W.J.
Journal Article
2017Lasergestütztes, automatisiertes Schneidverfahren zum Zuschnitt freier Formen und Modelle aus Verbundsicherheitsglas (VSG-Modelle)
Hötger, B.; Thiele, B.; Koch, C.; Gremmelspacher, M.; Rist, T.; Kübler, R.
Book Article
2017Lifetime prediction of ceramic components - a case study on hybrid rolling contact
Khader, I.; Rasche, S.; Lube, T.; Raga, R.; Degenhardt, U.; Kailer, A.
Journal Article
2017Local residual stress analysis on deep drawn cups by means of the incremental hole-drilling method
Schuster, S.; Pagenkopf, J.; Gibmeier, J.
Conference Paper
2017Macroscopic superlow friction of steel and diamond-like carbon lubricated with a formanisotropic 1,3-diketone
Amann, T.; Kailer, A.; Oberle, N.; Li, K.; Walter, M.; List, M.; Rühe, J.
Journal Article
2017Main-Group Halide Semiconductors Derived from Perovskite: Distinguishing Chemical, Structural, and Electronic Aspects
Fabini, D.H.; Labram, J.G.; Lehner, A.J.; Bechtel, J.S.; Evans, H.A.; Van Der Ven, A.; Wudl, F.; Chabinyc, M.L.; Seshadri, R.
Journal Article
2017Marker-free GPU-based digital image correlation system for high-temperature strain-controlled fatigue measurements
Blug, Andreas; Regina, David Joel; Eckmann, Stefan; Senn, M.; Eberl, Christoph; Bertz, Alexander; Carl, Daniel
Presentation
2017A material model for prediction of fatigue damage and degradation of CFRP materials
Hohe, J.; Gall, M.; Gauch, H.; Fliegener, S.; Hamid, Z.M.B.A.
Conference Paper
2017Material-based process-chain optimization in metal forming
Morand, L.; Pagenkopf, J.; Helm, D.
Journal Article, Conference Paper
2017Materials response to glancing incidence femtosecond laser ablation
Echlin, M.P.; Titus, M.S.; Straw, M.; Gumbsch, P.; Pollock, T.M.
Journal Article
2017Microstructure of Z-Phase Strengthened Martensitic Steels
Liu, F.; Rashidi, M.; Hald, J.; Reißig, L.; Andrén, H.-O.
Journal Article
2017Microstructure, mechanical properties and friction behavior of magnetron-sputtered V-C coatings
Stoyanov, P.; Schneider, J.; Rinke, M.; Ulrich, S.; Nold, E.; Dienwiebel, M.; Stüber, M.
Journal Article
2017Mikrowellenplasmagestützte Prozessentwicklung zur Herstellung von Funktionsgradientenhartmetallen für die CVD-Diamantbeschichtung
Mee, Manuel
: Scherge, Matthias; Ulrich, Sven; Schulze, Volker
Dissertation
2017Modeling transgranular crack growth in random 3D grain structures under cyclic loading
Beckmann, C.; Hohe, J.
Journal Article
2017Modelling die filling for powders with complex rheology: A new DEM contact-model
Breinlinger, T.; Schubert, R.; Hashibon, A.; Kraft, T.
Presentation
2017Multiscale Approach for the Damage Modeling of an Aluminum Casting Alloy with Stochastic Character
Andrieux, F.; Sun, D.Z.; Burblies, A.
Journal Article
2017Neue Chromstähle für Hochtemperaturanwendungen
Urban, D.
Journal Article
2017Numerical and experimental investigations on shot-peened high-strength steel by means of hole drilling, X-ray, synchrotron and neutron diffraction analysis
Farajian, M.; Hardenacke, V.; Pfeiffer, W.; Klaus, M.; Rebelo Kornmeier, J.
Journal Article
2017Numerical Modelling of Damage Initiation and Failure of Long Fibre-Reinforced Thermoplastics
Schulenberg, L.; Sun, D.-Z.; Seelig, T.
Book Article
2017Numerical studies of welding residual stresses in tubular joints and experimental validations by means of x-ray and neutron diffraction analysis
Hemmesi, K.; Farajian, M.; Boin, M.
Journal Article
2017On the transition from static to dynamic boundary friction of lubricated PEEK for a spreading adhesive contact by macroscopic oscillatory tribometry
Abdel-Wahed, S.A.; Koplin, C.; Jaeger, R.; Scherge, M.
Journal Article
2017On the upper and lower bounds of correlation window size in digital image correlation analysis
Zhang, H.; Senn, M.; Sui, T.; Lunt, A.; Brandt, L.R.; Papadaki, C.; Ying, S.; Salvati, E.; Eberl, C.; Korsunsky, A.M.
Conference Paper
2017Probabilistic fracture mechanics of forged rotor disks
Amann, C.
Dissertation
2017Quantitative characterization of surface topography using spectral analysis
Jacobs, T; Junge, T.; Pastewka, L.
Journal Article
2017Rapidly prototyping biocompatible surfaces with designed wetting properties via photolithography and plasma polymerization
Berwind, M.F.; Hashibon, A.; Fromm, A.; Gurr, M.; Burmeister, F.; Eberl, C.
Journal Article
2017Reversible anion-driven switching of an organic 2D crystal at a solid-liquid interface
Cui, K.; Mali, K.S.; Wu, D.; Feng, X.; Müller, K.; Walter, M.; Freyter, S. de; Mertens, S.F.L.
Journal Article
2017Robocasting of carbon-alumina core-shell composites using co-extrusion
Fu, Z.; Freihart, M.; Schlordt, T.; Frey, T.; Kraft, T.; Greil, P.; Travitzky, N.
Journal Article
2017The running-in tribological behavior of Pb-free brass and its effect on microstructural evolution
Liu, L.; Zhang, Z.C.; Dienwiebel, M.
Journal Article
2017Scaling laws for implicit viscosities in smoothed particle hydrodynamics
Bierwisch, C.; Polfer, P.
Conference Paper
2017A scaling parameter for pressure losses and thermal effects in lubricant flows with viscous dissipation
Codrignani, A.; Savio, D.; Magagnato, F.; Frohnapfel, B.
Journal Article
2017Schädigungsarmes virtuelles Prozessdesign
Zapara, M.; Augenstein, E.; Helm, D.
Journal Article
2017Si3N4/graphene nanocomposites for tribological application in aqueous environments prepared by attritor milling and hot pressing
Balázsi, C.; Fogarassy, Z.; Tapasztó, O.; Kailer, A.; Schröder, C.; Parchoviansky, M.; Galusek, D.; Dusza, J.; Balázsi, K.
Journal Article, Conference Paper
2017SiC-bonded diamond materials produced by pressureless silicon infiltration
Matthey, Björn; Herrmann, Mathias; Hörner, Martin; Geldern, Maike van; Kunze, Steffen; Blug, Bernhard; Michaelis, Alexander
Journal Article
2017Sliding of UHMWPE on ice: Experiment vs. modeling
Böttcher, R.; Seidelmann, M.; Scherge, M.
Journal Article
2017Spectroscopic signatures of triplet states in acenes
Stauffert, O.; Ghassemizadeh, R.; Walter, M.
Journal Article
2017SPH simulations of magnetorheological abrasive flow machining at a microscopic scale
Mohseni-Mofidi, S.; Nutto, C.; Lagger, H.; Bierwisch, C.
Conference Paper
2017Strain rate-dependent characterization of advanced high-strength steels under various multiaxial stress states for the determination of forming and failure limits
Klitschke, S.; Huberth, F.
Conference Paper
2017Strain-based critical plane approach to predict the fatigue life of high frequency mechanical impact (HFMI)-treated welded joints depending on the material condition
Schubnell, J.; Hardenacke, V.; Farajian, M.
Journal Article
2017Study of inelastic/elastic properties and shear modulus of Z-phase strengthened ferritic steels in the range 25 - 750 ° C
Kutelia, E.; Dzigrashvili, T.; Kukava, T.; Darsavelidze, G.; Kurashvili, I.; Riedel, H.; Donth, B.
Book Article
2017Study on fatigue crack initiation and propagation from forging defects
Varfolomeev, I.; Moroz, S.; Siegele, D.; Kadau, K.; Amann, C.
Journal Article, Conference Paper
2017Substituent correlations characterized by Hammett constants in the Spiropyran-Merocyanine transition
Brügner, O.; Reichenbach, T.; Sommer, M.; Walter, M.
Journal Article
2017Surface Engineering: Lebensdauerverlängerung metallischer Komponenten durch mechanische Oberflächenbehandlung
Farajian, M.; Schubnell, J.; Luke, M.
Journal Article
2017Systematic search for lithium ion conducting compounds by screening of compositions combined with atomistic simulation
Mutter, D.; Urban, D.; Elsässer, C.
Journal Article
2017Thermodynamically consistent modelling of recrystallization and grain coarsening in precipitation‐hardened alloys
Kertsch, C.; Helm, D.
Journal Article, Conference Paper
2017Thin film thermocouples for heat conductive sealing
Jänchen, R.; Fromm, A.
Conference Paper
2017Die Übertragung von mikrostrukturellen Eigenschaften aus der diskreten Versetzungsdynamik in Kontinuumsbeschreibungen
Stricker, M.
Dissertation
2017Untersuchung der thermomechanischen Eigenschaften von additiv gefertigtem IN718 mit Hilfe von Mikrostruktursimulationen
Baiker, M.; Pagenkopf, J.; Helm, D.
Journal Article
2017Untersuchung tribologischer Systeme mit Y-TZP-Keramiken
Schröder, Christian
: Scherge, M.; Hoffmann, M.
Dissertation
2017Verbesserte Simulation des Strangpressens von Aluminiumprofilen mit Gefügeberechnung
Sun, D.-Z.; Müller, S.
Report
2017Verfahren zum lokalen Umformen einer glatten Oberfläche eines aus Glas oder einer Glaskeramik gefertigten Substrates sowie ein mit dem Verfahren hergestelltes Bedienelement
Gremmelspacher, Matthias; Gumbsch, Peter; Kübler, Rainer; Lang, Britta; Rist, Tobias
Patent
2017Virtuelle Kennwertermittlung für die Umformsimulation von Feinblechen - Teil 2
Butz, Alexander; Pagenkopf, Jan; Baiker, Maria; Silbermann, Katja; Landgrebe, Dirk
Report
2017Vorhersage der Kantenrissbildung beim Warmbandwalzen schwer umformbarer Nickelbasislegierungen
Maas, Peter
: Riedel, H.; Schulze, V.
Dissertation
2017Wälzlagerschmierung mit Kupferkolloiden
Scherge, M.; Knorring, J. von
Conference Paper
2017A wear model for silicon nitride in dry sliding contact against a nickel-base alloy
Khader, I.; Renz, A.; Kailer, A.
Journal Article
2017Wear of hardfaced valve spindles in highly loaded stationary lean-burn large bore gas engines
Renz, A.; Kürten, D.; Lehmann, O.
Journal Article
2017X-ray emission spectroscopy of proteinogenic amino acids at all relevant absorption edges
Meyer, F.; Blum, M.; Benkert, A.; Hauschild, D.; Jeyachandran, Y.L.; Wilks, R.G.; Yang, W.; Bär, M.; Heske, C.; Reinert, F.; Zharnikov, M.; Weinhardt, L.
Journal Article
2017Zum Einfluss von herstellungsbedingten Ungänzen auf das Festigkeitsverhalten von Bauteilen aus Stahlguss
Siegele, Dieter; Tempel, Peter; Eichheimer, Christian; Farajian, Majid; Veile, Ines
Journal Article
2016 First-principles investigation of hydrogen interaction with metals
Stefano, D. di
Dissertation
2016Activation and mechanochemical breaking of C-C bonds initiate wear of diamond (110) surfaces in contact with silica
Peguiron, A.; Moras, G.; Walter, M.; Uetsuka, H.; Pastewka, L.; Moseler, M.
Journal Article
2016Analysis of the effective thermoelastic properties and stress fields in silicon nitride based on EBSD data
Othmani, Y.; Böhlke, T.; Lube, T.; Fellmeth, A.; Chlup, Z.; Colonna, F.; Hashibon, A.
Journal Article
2016Band Edge Engineering in BiVO4/TiO2 Heterostructure: Enhanced Photoelectrochemical Performance through Improved Charge Transfer
Singh, A.P.; Kodan, N.; Mehta, B.R.; Held, A.; Mayrhofer, L.; Moseler, M.
Journal Article
2016Berechnung der Wasserstoffdiffusion in laserstrahlgeschweißten hochfesten Stählen
Schweizer, F.
Conference Paper
2016Berechnung von Eigenspannungen in Mehrlagenrohrschweißverbindungen und Quantifizierung des Einflusses auf die Lebensdauer bei Schwingbeanspruchung
Hempel, Nico; Nitschke-Pagel, Thomas; Dilger, Klaus; Moroz, Sergii; Varfolomeev, Igor
Report
2016Bond-order potential for magnetic body-centered-cubic iron and its transferability
Lin, Y.-S.; Mrovec, M.; Vitek, V.
Journal Article
2016Boundary lubrication of heterogeneous surfaces and the onset of cavitation in frictional contacts
Savio, D.; Pastewka, L.; Gumbsch, P.
Journal Article
2016Bruchmechanischer Festigkeitsnachweis für Maschinenbauteile unter Berücksichtigung der Spannungsmehrachsigkeit
Dittmann, F.; Varfolomeev, I.; Kaffenberger, M.
Report
2016Calculation methods for thick walled components under creep fatigue - review and advanced concepts
Oesterlin, H.; Maier, G.; Günther, P.
Conference Paper
2016Charakterisierung und Modellierung des Versagensverhaltens eines Aluminiumgusswerkstoffs mit Berücksichtigung inhomogener Porositätsverteilung
Sun, D.-Z.; Andrieux, F.; Ma, Y.
Conference Paper
2016Charakterisierung und Modellierung von mechanischen Fügeverbindungen mit einseitiger Zugänglichkeit für den profilintensiven Leichtbau unter Crashbelastung
Rochel, P.; Bier, M.; Sommer, S.; Gumbsch, P.; Giese, P.; Hein, D.; Meschut, G.
Conference Paper
2016Chemical substitution - alignment of the surface potentials for efficient charge transport in nanocrystalline TiO2 photocatalysts
Primc, D.; Zeng, G.; Leute, R.; Walter, M.; Mayrhofer, L.; Niederberger, M.
Journal Article
2016Combining in situ and online approaches to monitor interfacial processes in lubricated sliding contacts
Stoyanov, P.; Shockley, J.M.; Dienwiebel, M.; Chromik, R.R.
Journal Article
2016Comparison of analytical methods for the consideration of thermal stresses in the engineering failure assessment
Dittmann, F.; Varfolomeev, I.
Journal Article, Conference Paper
2016Computational analysis of Li diffusion in NZP-type materials by atomistic simulation and compositional screening
Mutter, D.; Lang, B.; Ziebarth, B.; Urban, D.; Elsässer, C.
Book Article
2016Computational assessment of the microstructure-dependent plasticity of lamellar gray cast iron - Part III: A new yield function derived from microstructure-based models
Metzger, M.; Seifert, T.
Journal Article
2016The concept of virtual material testing and its application to sheet metal forming simulations
Butz, A.; Pagenkopf, J.; Baiker, M.; Helm, D.
Conference Paper
2016Consideration of fatigue crack growth aspects in the design and assessment of railway axles
Varfolomeev, I.; Luke, M.
Book Article
2016Contact area of rough spheres: Large scale simulations and simple scaling laws
Pastewka, L.; Robbins, M.O.
Journal Article
2016Coupled discrete element and smoothed particle hydrodynamics simulations of the die filling process
Breinlinger, T.; Kraft, T.
Journal Article
2016A crack opening stress equation for in-phase and out-of-phase thermomechanical fatigue loading
Fischer, C.; Schweizer, C.; Seifert, T.
Journal Article
2016The creep behavior of long fiber reinforced thermoplastics examined by microstructural simulations
Fliegener, S.; Hohe, J.; Gumbsch, P.
Journal Article
2016Creep-fatigue lifetime modelling of bellows made of AISI 316 using advanced models
Friedmann, V.; Maier, G.; Schweizer, C.; Quintus, C.
Conference Paper
2016Damage initiation and evolution in silicon nitride under non-conforming lubricated hybrid rolling contact
Raga, R.; Khader, I.; Chlup, Z.; Kailer, A.
Journal Article
2016Damage tolerance of railway axles - the issue of transferability revisited
Gänser, H.-P.; Maierhofer, J.; Tichy, R.; Zivkovic, I.; Pippan, R.; Luke, M.; Varfolomeev, I.
Journal Article
2016Daten- und prognosebasierte Generierung von Modellparametern für die Crashsimulation mechanisch gefügter Verbindungen
Günther, M.; Herfert, D.; Giese, P.; Meschut, G.; Sommer, S.; Rochel, P.
Conference Paper
2016Deformation and damage behavior of lightweight steels at high rate multiaxial loading
Klitschke, S.; Böhme, W.
Journal Article
2016A DEM contact model for history-dependent powder flows
Hashibon, A.; Breinlinger, T.; Schubert, R.; Kraft, T.
Journal Article
2016DEM modelling of powder flow and powder filling during die compaction
Schubert, R.; Yan, Z.; Marigo, M.; Kraft, T.
Conference Paper
2016Determination of instability of a DP 980 steel sheet under different stress states based on experiment and theoretical models
Song, H.-W.; Sun, D.-Z.; Andrieux, F.; Zhang, S.-H.
Conference Paper
2016Development of sintered bearings with minimal friction losses and maximum life time using infiltrated liquid crystalline lubricants
Amann, T.; Kailer, A.; Beyer-Faiß, S.; Stehr, W.; Metzger, B.
Journal Article
2016Direct digital manufacturing of orthopedic insoles from thermoplastic polyurethane
Ziegler, T.; Hernandez Marquez, J.; Jaeger, R.
Conference Paper
2016Effect of a deep cryogenic treatment on wear and microstructure of a 6101 aluminum alloy
Steier, V.F.; Ashiuchi, E.S.; Reißig, L.; Araújo, J.A.
Journal Article
2016Effects of sublattice symmetry and frustration on ionic transport in garnet solid electrolytes
Kozinsky, B.; Akhade, S.A.; Hirel, P.; Hashibon, A.; Elsässer, C.; Mehta, P.; Logeat, A.; Eisele, U.
Journal Article
2016Efficient simulation of the crash behaviour of the dual phase steel HCT980X
Trondl, A.; Sun, D.-Z.; Andrieux, F.
Journal Article
2016Eigenarten der Wasserstoffversprödung und standardisierte Testmethoden
Wackermann, K.; Pfeiffer, W.
Journal Article
2016Einlaufverhalten einer untereutektischen AlSi-Legierung unter Berücksichtigung des Randzonengefüges
Linsler, D.
Dissertation
2016Elektrisch leitfähige Schmierstoffe für adaptive Tribosysteme - Synthese und tribologisches Verhalten unter dem Einfluss von elektrischen Potenzialen
Kailer, A.; Dold, C.; Schubert, T.; Ahrens, M.; Altmann, P.; Grundei, S.; Enekes, C.
Journal Article
2016Entwicklung einer Auswertemethode für bruchmechanische Versuche an kleinen Proben auf der Basis eines Kohäsivzonenmodells
Mahler, M.
: Gumbsch, P. (Betreuer)
Dissertation
2016Entwicklung einer Methode zur Crashsimulation von langfaserverstärkten Thermoplast (LFT) Bauteilen auf Basis der Faserorientierung aus der Formfüllsimulation
Sun, D.-Z.; Schulenberg, L.; Lienhard, J.; Andrieux, F.; Huberth, F.; Andrä, H.; Niedziela, D.; Shklyar, I.; Steiner, K.; Wirjadi, O.
Report
2016Entwicklung eines korrosionsbeständigen Diamant-Siliciumcarbid-Werkstoffsystems für die Energietechnik - EKODISC
Blug, B.; Hörner, M.; Walter, M.; Hollstein, T.; Matthey, B.; Herrmann, M.; Kunze, S.; Striegler, M.; Fries, M.; Armgardt, M.; Harig, T.; Höfer, M.; Schäfer, L.
Report
2016Entwicklung eines zuverlässigen und verschleißbeständigen Gegenkolbenmotors für Blockheizkraftwerke mit elektrischen Leistungen von 2 kW bis 20 kW -ELEKTRO-POWER-. Abschlussbericht
Koplin, C.; Renz, A.; Kailer, A.
Report
2016Evaluation of alumina toughened zirconia implants with a sintered, moderately rough surface: An experiment in the rat
Kohal, R.J.; Bächle, M.; Renz, A.; Butz, F.
Journal Article
2016Evolution equations for the C(t)-integral and the crack-tip opening displacement CTOD for elastic-viscoplastic material behavior and temperature dependent material properties
Schweizer, C.
Journal Article
2016The evolving quality of frictional contact with graphene
Li, S.; Li, Q.; Carpick, R.W.; Gumbsch, P.; Liu, X.Z.; Ding, X.; Sun, J.; Li, J.
Journal Article
2016Examination of methods for the treatment of constraint effects within the FAD approach
Varfolomeev, I.; Dittmann, F.
Journal Article, Conference Paper
2016Experimental and numerical study on crack initiation under fretting fatigue loading
Luke, M.; Burdack, M.; Moroz, S.; Varfolomeev, I.
Journal Article
2016Experimental investigation of crack initiation. In face-centered cubic materials in the high and very high cycle fatigue regime
Straub, T.
: Kraft, O.; Eberl, C.; Lapusta, Y.
Dissertation
2016Experimental investigations and numerical simulation accompanying the HWT test loop operation
Speicher, M.; Klenk, A.; Oesterlin, H.; Maier, G.; Schwienherr, M.; Wang, Y.; Scholz, A.; Oechsner, M.
Conference Paper
2016Experimental validation of inspection intervals for railway axles accompanying the engineering process
Traupe, M.; Jenne, S.; Lütkepohl, K.; Varfolomeev, I.
Journal Article
2016Fatigue properties of conventionally manufactured and micro-powder-injection-moulded 17-4PH micro-components
Slaby, S.A.; Kraft, O.; Eberl, C.
Journal Article
2016Femtosecond Laser Damage in Metals and Semiconductors During TriBeam Tomography
Echlin, M.P.; Titus, M.; Lenthe, W.C.; Straw, M.; Gumbsch, P.; Pollock, T.M.
Journal Article
2016Fertigungstechnische und tribologische Wirkmechanismen beim Polymerläppen am Beispiel der Werkstoffpaarung einer Nockenwellenlagerung
Weyhmüller, T.
Dissertation
2016First principles characterisation of brittle transgranular fracture of titanium hydrides
Olsson, P.A.T.; Mrovec, M.; Kroon, M.
Journal Article
2016First-principles investigation of hydrogen interaction with TiC precipitates in α-Fe
Stefano, D. di; Nazarov, R.; Hickel, T.; Neugebauer, J.; Mrovec, M.; Elsässer, C.
Journal Article
2016Flexoelectricity and the polarity of complex ferroelastic twin patterns
Salje, E.K.H.; Li, S.; Stengel, M.; Gumbsch, P.; Ding, X.
Journal Article
2016Fluorine-terminated diamond surfaces as dense dipole lattices: The electrostatic origin of polar hydrophobicity
Mayrhofer, L.; Moras, G.; Mulakaluri, N.; Rajagopalan, S.; Stevens, P.A.; Moseler, M.
Journal Article
2016Formation of extended prismatic dislocation structures under indentation
Gagel, J.; Weygand, D.; Gumbsch, P.
Journal Article
2016Fracture, fatigue, and creep of nanotwinned metals
Li, X.; Dao, M.; Eberl, C.; Hodge, A.M.; Gao, H.
Journal Article
2016Fraunhofer topics of the future "SUPERGRID". Supergrid - Approach for the integration of renewable energy in Europe and North Africa
Platzer, Werner; Boie, Inga; Ragwitz, Mario; Kost, Christoph; Thoma, Jürgen; Vogel, Axel; Fluri, Thomas; Pfeiffer, Wulf; Burmeister, Frank; Tham, Nils; Pudlik, Martin; Bohn, Sven; Agsten, Michael; Bretschneider, Peter; Westermann, Dirk; Kranzer, Dirk; Schlegl, Thomas
Report
2016Fraunhofer Zukunftsthemen "SUPERGRID". Supergrid - Ansatz für die Integration von Erneuerbaren Energien in Europa und Nordafrika
Platzer, Werner; Boie, Inga; Ragwitz, Mario; Kost, Christoph; Thoma, Jürgen; Vogel, Axel; Fluri, Thomas; Pfeiffer, Wulf; Burmeister, Frank; Tham, Nils; Pudlik, Martin; Bohn, Sven; Agsten, Michael; Bretschneider, Peter; Westermann, Dirk; Kranzer, Dirk; Schlegl, Thomas
Report
2016Fraunhofer-Institut für Werkstoffmechanik. Jahresbericht 2015
 
Annual Report
2016Friction and wear behavior of copper-zinc alloy based on in-situ holographic microscopy and radionuclide technique
Liu, L.; Zhan, P.; Liu, W.; Liu, X.; Zhang, Z.; Martin, D.
Journal Article
2016From thermoelectric bulk to nanomaterials: Current progress for Bi2Te3 and CoSb3
Peranio, N.; Eibl, O.; Bäßler, S.; Nielsch, K.; Klobes, B.; Hermann, R.P.; Daniel, M.; Albrecht, M.; Görlitz, H.; Pacheco, V.; Bedoya-Martinez, N.; Hashibon, A.; Elsässer, C.
Journal Article
2016Geometry optimization of branchings in vascular networks
Khamassi, J.; Bierwisch, C.; Pelz, P.
Journal Article
2016High frequency mechanical impact treatment (HFMI) for the fatigue improvement: numerical and experimental investigations to describe the condition in the surface layer
Foehrenbach, J.; Hardenacke, V.; Farajian, M.
Journal Article
2016Hydrogen diffusion and trapping in Ti-modified advanced high strength steels
Winzer, N.; Rott, O.; Thiessen, R.; Thomas, I.; Mraczek, K.; Höche, T.; Wright, L.; Mrovec, M.
Journal Article
2016Hydrogen treated anatase TiO2: A new experimental approach and further insights from theory
Mehta, M.; Kodan, N.; Kumar, S.; Kaushal, A.; Mayrhofer, L.; Walter, M.; Moseler, M.; Dey, A.; Krishnamurthy, S.; Basu, S.; Singh, A.P.
Journal Article
2016Hydrogenated vacancies lock dislocations in aluminium
Xie, D.; Li, S.; Li, M.; Wang, Z.; Gumbsch, P.; Sun, J.; Ma, E.; Li, J.; Shan, Z.
Journal Article
2016Importance of inclusion of the effect of s electrons into bond-order potentials for transition bcc metals with d-band mediated bonding
Yi-Shen, L.; Mrovec, M.; Vitek, V.
Journal Article
2016In-situ detection of hydrogen evolution in a lubricated sliding pin on disk test under high vacuum
Kuerten, D.; Winzer, N.; Kailer, A.; Pfeiffer, W.; Spallek, R.; Scherge, M.
Journal Article
2016Influence of point defects on the phonon thermal conductivity and phonon density of states of Bi2Te3
Bedoya-Martinez, O.N.; Hashibon, A.; Elsässer, C.
Journal Article
2016Influence of subsurface plastic deformation on the running-in behavior of a hypoeutectic AlSi alloy
Linsler, D.; Schröckert, F.; Scherge, M.
Journal Article, Conference Paper
2016Influence of the Doctor Blade Shape on Tape Casting-Comparison Between Analytical, Numerical, and Experimental Results
Polfer, P.; Fu, Z.; Breinlinger, T.; Roosen, A.; Kraft, T.
Journal Article
2016The influence of the initial near-surface microstructure and imposed stress level on the running-in characteristics of lubricated steel contacts
Brink, A.; Lichtenberg, K.; Scherge, M.
Journal Article
2016Insights into interfacial changes and photoelectrochemical stability of InxGa1-xN (0001) photoanode surfaces in liquid environments
Caccamo, L.; Cocco, G.; Martin, G.; Zhou, H.; Fundling, S.; Gad, A.; Mohajerani, M.S.; Abdelfatah, M.; Estrade, S.; Peiro, F.; Dziony, W.; Bremers, H.; Hangleiter, A.; Mayrhofer, L.; Lilienkamp, G.; Moseler, M.; Daum, W.; Waag, A.
Journal Article
2016Integrated strategy toward self-powering and selectivity tuning of semiconductor gas sensors
Gad, A.; Hoffmann, M.W.G.; Casals, O.; Mayrhofer, L.; Fabrega, C.; Caccamo, L.; Hernandez-Ramirez, F.; Mohajerani, M.S.; Moseler, M.; Shen, H.; Waag, A.; Prades, J.D.
Journal Article
2016Interfacial insight in multi-junction metal oxide photoanodes for water splitting applications
Mettenbörger, A.; Gönüllü, Y.; Fischer, T.; Heisig, T.; Sasinska, A.; Maccato, C.; Carraro, G.; Sada, C.; Barreca, D.; Mayrhofer, L.; Moseler, M.; Held, A.; Mathur, S.
Journal Article
2016Long-term material tests in liquid molten salts
Preußner, J.; Peiffer, W.; Piedra, E.; Oeser, S.; Tandler, M.; Hartrot, P. von; Maier, G.
Conference Paper
2016A mechanism-based model for prediction of damage and failure in cold forging processes
Zapara, M.; Augenstein, E.; Helm, D.
Conference Paper
2016Mechanismenbasierte Materialmodelle zur besseren Vorhersage der Schädigung und des Versagens in der Kaltmassivumformung
Zapara, M.; Augenstein, E.; Helm, D.
Journal Article
2016Mechanismenbasierte Materialmodelle zur Vorhersage der Schädigung und des Versagens in der Kaltmassivumformung von Stählen
Zapara, M.; Augenstein, E.; Helm, D.
Report
2016Mechanisms for p-type behavior of ZnO, Zn1−xMgxO, and related oxide semiconductors
Urban, D.F.; Körner, W.; Elsässer, C.
Journal Article
2016Mehrstufiges numerisches Screening für neuartige Lasteinleitungskonzepte
Fliegener, S.; Hohe, J.
Journal Article
2016Messung von Risswiderstandskurven und der Ermüdungsrissausbreitung an dünnwandigen Rohren zur bruchmechanischen Bewertung
Wackermann, K.; Schweizer, C.; Varfolomeev, I.; Maier, G.; Mohrmann, R.
Conference Paper
2016A method for evaluating the environmental life cycle potential of building geometry
Hollberg, A.; Klüber, N.; Schneider, S.; Ruth, J.; Donath, D.
Conference Paper
2016Micromechanical finite element modeling of long fiber reinforced thermoplastics
Fliegener, Sascha
: Gumbsch, P.; Böhlke, T.
Dissertation
2016microPREP: A new laser tool for high-volume sample preparation
Wagner, U.; Petsch, T.; Krause, M.; Höche, T.
Conference Paper
2016Microstructure and mechanical properties of Ti-15Zr alloy used as dental implant material
Medvedev, A.E.; Molotnikov, A.; Lapovok, R.; Zeller, R.; Berner, S.; Habersetzer, P.; Dalla Torre, F.
Journal Article
2016Mikrostruktur- und mechanismusbasierte Werkstoffmodelle zur Beschreibung des Deformations- und Lebensdauerverhaltens von thermomechanisch beanspruchten Graugusswerkstoffen
Metzger, Mario
: Riedel, H.; Böhlke, T.; Seifert, T.
Dissertation
2016Mikrostrukturbasierte Beschreibung der Entstehung von Rissen an Defekten in Schweißverbindungen
Beckmann, C.; Kennerknecht, T.; Preußner, J.; Farajian, M.; Siegele, D.; Luke, M.; Sguaizer, Y.; Oeser, S.; Strohmeier, U.; Hohe, J.
Report
2016Mikrostruktursimulationen zur Ermittlung von Materialeigenschaften für Blechwerkstoffe und Anwendung in der Umformsimulation
Baiker, Maria
: Riedel, H.; Böhlke, T.; Liewald, M.
Dissertation
2016Miniaturisierung? Ja, bitte!
Piotter, V.; Eberl, C.; Kraft, O.
Journal Article
2016Mit Handicap in den Schnee
Scherge, M.; Rombach, R.
Journal Article
2016Mixed boundary conditions for FFT-based homogenization at finite strains
Kabel, M.; Fliegener, S.; Schneider, M.
Journal Article
2016A model for strain hardening, recovery, recrystallization and grain growth with applications to forming processes of nickel base alloys
Riedel, H.; Svoboda, J.
Journal Article
2016Modellierung des Verformungs- und Versagensverhaltens punktgeschweißter Mischverbindungen zwischen mikrolegierten und pressgehärteten Stählen
Burget, Sebastian
: Gumbsch, P.; Enzinger, N.
Dissertation
2016Modellierung von Anisotropieentwicklung und Rissausbreitung beim Sintern dünner keramischer Schichten
Rasp, Tobias
Dissertation
2016Modelling and simulation of fatigue crack initiation in metallic joints based on crystal plasticity
Beckmann, C.; Farajian, M.; Siegele, D.; Hohe, J.
Journal Article
2016Modelling grain coarsening in the framework of rational extended thermodynamics
Kertsch, L.; Helm, D.
Journal Article, Conference Paper
2016Modelling grain growth in the framework of Rational Extended Thermodynamics
Kertsch, L.; Helm, D.
Journal Article
2016Modified shape of dynamic master curves due to adiabatic effects
Reichert, T.; Böhme, W.; Tlatlik, J.
Journal Article, Conference Paper
2016Molecular dynamic simulation of collision-induced third-body formation in hydrogen-free diamond-like carbon asperities
Lautz, J. von; Pastewka, L.; Gumbsch, P.; Moseler, M.
Journal Article
2016Multi-Phase Friction and Wear Reduction by Copper Nanopartices
Scherge, M.; Böttcher, R.; Kürten, D.; Linsler, D.
Journal Article
2016Neue Sensortechnik für Verpackungsprozesse
Fromm, A.; Gurr, M.; Wendt, G.; Jänchen, R.
Journal Article
2016A new DEM contact-model for simulating die filling for powders with complex rheology
Hashibon, A.; Breinlinger, T.; Schubert, R.; Kraft, T.
Conference Paper
2016Numerical and experimental description of the welding residual stress field in tubular joints for fatigue assessment
Hemmesi, K.; Farajian, M.; Siegele, D.
Journal Article
2016Numerical exploration into the potential of tungsten reinforced CuCrZr matrix composites
Hohe, J.; Fliegener, S.; Findeisen, C.; Reiser, J.; Widak, V.; Rieth, M.
Journal Article
2016Numerische und experimentelle Untersuchung der Rissinitiierungsphase in der Wärmeeinflusszone von Schweißverbindungen
Beckmann, C.; Farajian, M.; Hohe, J.; Kennerknecht, T.; Luke, M.; Preußner, J.
Conference Paper
2016Offset-corrected Δ-Kohn-Sham scheme for semiempirical prediction of absolute x-ray photoelectron energies in molecules and solids
Walter, M.; Moseler, M.; Pastewka, L.
Journal Article
2016On slip transmission and grain boundary yielding
Stricker, M.; Gagel, J.; Schmitt, S.; Schulz, K.; Weygand, D.; Gumbsch, P.
Journal Article
2016On the feasibility of the Chevron Notch Beam method to measure fracture toughness of fine-grained zirconia ceramics
Kailer, A.; Stephan, M.
Journal Article
2016On the mechanism of dynamic embrittlement and its effect on fatigue crack propagation in IN718 at 650°C
Christ, H.J.; Wackerman, K.; Krupp, U.
Journal Article, Conference Paper
2016Online Kriech-Ermüdungs-Überwachung an einem Komponentenversuch
Mohrmann, R.; Kranz, A.; Maier, G.; Oesterlin, H.
Conference Paper
2016Optimierte Gestaltung von Lasteinleitungselementen für thermoplastische Sandwichbauteile
Fliegener, S.; Hohe, J.
Journal Article
2016Optimized solder alloy for glass-to-metal joints by simultaneous soldering and anodic bonding
Malfait, W.J.; Klemencic, R.; Lang, B.; Rist, T.; Klucka, M.; Zajacz, Z.; Koebel, M.M.
Journal Article
2016Particularities of testing structured sheet metals in 3-point bending tests
Kazak, F.; Schleuß, L.; Ossenbrink, R.; Michailov, V.; Weiß, S.
Journal Article
2016Potential controlled tribological behavior of water-based ionic liquids
Amann, T.; Dold, C.; Kailer, A.
Conference Paper
2016The potential of spinodal ferrite decomposition for increasing the very high cycle fatigue strength of duplex stainless steel
Krupp, U.; Söker, M.; Giertler, A.; Dönges, B.; Christ, H.-J.; Wackermann, K.; Boll, T.; Thuvander, M.; Marinelli, M.C.
Journal Article
2016Precipitate growth in multi-component systems with stress relaxation by diffusion and creep
Svoboda, J.; Fischer, F.D.; Riedel, H.; Kozeschnik, E.
Journal Article
2016A probabilistic constitutive model for closed-cell foams
Beckmann, C.; Hohe, J.
Journal Article
2016Quantifizierung des Bruchverhaltens unter transienter thermomechanischer Belastung. Abschlussbericht
Tlatlik, J.; Siegele, D; Hardenacke, V.
Report
2016Quantifizierung des Einflusses der Nahtqualität auf die Ermüdungsfestigkeit von Schweißverbindungen
Farajian, M.; Fenzl, R.; Siegele, D.; Beckmann, C.; Tempel, P.; Kranz, B.; Wagner, S.
Report
2016Rapid Prototyping
Gurr, M.; Mülhaupt, R.
Book Article
2016Richtlinie Nichtlinear: Vorhaben Nr. 301. Rechnerischer Bauteilfestigkeitsnachweis unter expliziter Erfassung nichtlinearen Werkstoff-Verformungsverhaltens
Fiedler, M.; Varfolomeev, I.; Wächter, M.
Report
2016Sequence of Stages in the Microstructure Evolution in Copper under Mild Reciprocating Tribological Loading
Greiner, C.; Liu, Z.; Strassberger, L.; Gumbsch, P.
Journal Article
2016Simulation of die filling for powders with complex rheology
Breinlinger, T.; Hashibon, A.; Schubert, R.; Kraft, T.
Conference Paper
2016Simulation of Hertzian cone cracks using a phase field description for fracture
Strobl, M.; Morand, L.; Seelig, T.
Journal Article, Conference Paper
2016Simulation of the damage mechanisms of glass fiber reinforced polypropylene based on micro specimens and 1:1 models of their microstructure
Fliegener, S.; Kennerknecht, T.; Kabel, M.
Conference Paper
2016Simulation von Laserschweißprozessen zur Bewertung der wasserstoffbeeinflussten Kaltrissneigung hochfester Stähle
Schweizer, F.
Dissertation
2016Suspension modeling using smoothed particle hydrodynamics: Accuracy of the viscosity formulation and the suspended body dynamics
Polfer, P.; Kraft, T.; Bierwisch, C.
Journal Article
2016Tailored buckling microlattices as reusable light-weight shock absorbers
Frenzel, T.; Findeisen, C.; Kadic, M.; Gumbsch, P.; Wegener, M.
Journal Article
2016Theoretical screening of intermetallic ThMn12-type phases for new hard-magnetic compounds with low rare earth content
Körner, W.; Krugel, G.; Elsässer, C.
Journal Article
2016Thermomechanical characterization of 22MnB5 steels with special emphasis on stress relaxation and creep behavior
Uppaluri, R.; Helm, D.
Journal Article
2016To what extent may we accept manufacturing-related microscopic defects in cast steel?
Veile, Ines; Tempel, Peter; Weikert-Müller, Miriam
Conference Paper
2016Tribochemical wear of cutting-tool ceramics in sliding contact against a nickel-base alloy
Renz, A.; Khader, I.; Kailer, A.
Journal Article
2016Tribofilms Forming in Oil-Lubricated Contacts
Scherge, M.; Brink, A.; Linsler, D.
Journal Article
2016Tribologische Untersuchung flüssigkristalliner Schmierstoffe zur Erforschung infiltrierter Sinterlager - NanoGleit
Amann, T.; Kailer, A.
Report
2016Tribometer based on in-situ and radionuclide technique and its characteristic experiment study
Liu, L.; Zhang, Z.; Zhan, P.; Dienwiebel, M.
Journal Article
2016Undichte Lebensmittelpackungen vermeiden
Jänchen, R.; Fromm, A.
Journal Article
2016Verfahren und Vorrichtung zum Erzeugen und Nachbehandeln oder nur zum Nachbehandeln von Schweißverbindungen an rotationssymmetrischen Bauteilen
Farajian, Majid
Patent
2016Verformungs- und Versagensverhalten von Stählen für den Automobilbau unter crashartiger mehrachsiger Belastung
Trondl, A.; Klitschke, S.; Böhme, W.; Sun, D.-Z.
Report
2016Vergleich der analytischen Methoden zur Berücksichtigung thermischer Spannungen im Rahmen des FAD-Konzepts
Dittmann, F.; Schuster, L.; Varfolomeev, I.
Conference Paper
2016Verschleiß im Reibkontakt durch Auffaltung der Metalloberfläche
Beckmann, N.; Moseler, M.
Journal Article
2016Virtual testing of dual-phase steels: Effect of martensite morphology on plastic flow behavior
Pagenkopf, J.; Butz, A.; Wenk, M.; Helm, D.
Journal Article
2016Vorrichtung und Verfahren zum Bestimmen einer Wandschubspannung und System zur Erkennung von Arteriosklerose
Khamassi, Jamel; Bierwisch, Claas
Patent
2016Z phase strengthened steels for ultra-supercritical power plants
Riedel, H.
Report
2016Zum Einfluss struktureller Eigenschaften auf das tribologische und rheologische Verhalten geschmierter Reibkontakte am Beispiel von ionischen Flüssigkeiten
Dold, Christian
: Scherge, Matthias
Dissertation
2016Zur Modifikation von Masterkurven für die Bruchzähigkeit bei erhöhten Belastungsraten
Reichert, T.; Böhme, W.; Tlatlik, J.
Conference Paper
2015 Probabilistische Methode zur Vorhersage des effektiven Materialverhaltens fester Schäume mit ungeordneter Mikrostruktur
Beckmann, C.
Dissertation
2015Accuracy of buffered-force QM/MM simulations of silica
Peguiron, A.; Colombi Ciacchi, L.; De Vita, A.; Kermode, J.R.; Moras, G.
Journal Article
2015Anwendung des dehnungsbasierten Versagensbewertungsdiagramms auf Strukturen mit Oberflächenfehlern
Varfolomeev, I.; Windisch, M.; Sinnema, G.
Conference Paper
2015Application of the strain-based FAD to failure assessment of surface cracked components
Varfolomeev, I.; Windisch, M.; Sinnema, G.
Journal Article
2015Assessment of fatigue crack closure under in-phase and out-of-phase thermomechanical fatigue loading using a temperature dependent strip yield model
Fischer, C.; Schweizer, C.; Seifert, T.
Journal Article
2015Atomistic aspects of fracture
Bitzek, E.; Kermode, J.R.; Gumbsch, P.
Journal Article
2015Atomistic simulations of silica by sequential and concurrent multiscale coupling
Peguiron, A.
Dissertation
2015Atomistically enabled nonsingular anisotropic elastic representation of near-core dislocation stress fields in alpha-iron
Seif, D.; Po, G.; Mrovec, M.; Lazar, M.; Elsässer, C.; Gumbsch, P.
Journal Article
2015Atomistische Simulation der Materialmodifikation durch die Kohlenstoffallotrope Graphen und Kohlenstoffnanoröhren
Klemenz, A.
Dissertation
2015Atomistische Simulation tribologischer Elementarprozesse bei nanokristallinen Übergangsmetallen
Beckmann, N.
Dissertation
2015Bewertung der Restlebensdauer kritischer Komponenten von Bestandskraftwerken bei flexibler Fahrweise
Maier, G.; Hübsch, O.; Oesterlin, H.; Riedel, H.; Lüdenbach, G.; Mohrmann, R.
Conference Paper
2015Capability of new high strength ADI-materials for automotive components under crash loading
Böhme, W.; Reissig, L.
Journal Article
2015Characterisation of resin transfer moulded composite laminates under high rate tension, compression and shear loading
Lienhard, J.; Böhme, W.
Journal Article
2015Charakterisierung und Bewertung der Zug- und Ermüdungseigenschaften von Mikrobauteilen aus 17-4PH Edelstahl - Ein Vergleich von mikropulverspritzgegossenem und konventionell hergestelltem Material
Slaby, S.A.
Dissertation
2015Charakterisierung und Modellierung von mechanischen Fügeverbindungen mit einseitiger Zugänglichkeit für den profilintensiven Leichtbau unter Crashbelastung
Bier, M.; Sommer, S.; Giese, P.; Hein, D.
Conference Paper
2015Co-simulations of discrete and finite element codes
Dehning, C.; Bierwisch, C.; Kraft, T.
Conference Paper
2015Combined crystal plasticity and phase-field method for recrystallization in a process chain of sheet metal production
Vondrous, A.; Bienger, P.; Schreijäg, S.; Selzer, M.; Schneider, D.; Nestler, B.; Helm, D.; Mönig, R.
Journal Article
2015Combining mechanical interlocking, force fit and direct adhesion in polymer-metal-hybrid structures
Paul, Hanna; Luke, Michael; Henning, Frank
Journal Article
2015Common universal data structures (CUDS) and vocabulary in the SimPhoNy integrated framework
Hashibon, A.; Rasp, T.; Franklin, N.; Tziakos, I.; Pinte, D.; Dadvand, P.; Roig, C.; Mattila, K.; Puurtinen, T.; Hiltunen, K.; Roman-Perez, G.; Garcia, G.; Adler, J.
Conference Paper
2015Complex nanotwin substructure of an asymmetric Σ9 tilt grain boundary in a silicon polycrystal
Stoffers, A.; Ziebarth, B.; Barthel, J.; Cojocaru-Mirédin, O.; Elsässer, C.; Raabe, D.
Journal Article
2015Computational assessment of the microstructure-dependent plasticity of lamellar gray cast iron - Part I: Methods and microstructure-based models
Metzger, M.; Seifert, T.
Journal Article
2015Computational assessment of the microstructure-dependent plasticity of lamellar gray cast iron - Part II: Initial yield surfaces and directions
Metzger, M.; Seifert, T.
Journal Article
2015A constitutive model for the simulation of the deformation behavior of TWIP steels
Haufe, A.; Erhart, A.; Butz, A.
Conference Paper
2015Constrained sintering of alumina stripes on rigid substrates: Effect of substrate roughness and coating
Jamin, C.; Rasp, T.; Kraft, T.; Guillon, O.
Journal Article
2015Correlation between anisotropic green microstructure of spherical-shaped alumina particles and their shrinkage behavior
Fu, Z.W.; Polfer, P.; Kraft, T.; Roosen, A.
Journal Article, Conference Paper
2015Corrigendum to “Influence of hydrodynamic drag model on shear stress in the simulation of magnetorheological fluids” [J. Non-Newtonian Fluid Mech. 218 (2015) 16–26]
Lagger, H.G.; Breinlinger, T.; Korvink, J.G.; Moseler, M.; Renzo, A. di; Maio, F. di; Bierwisch, C.
Journal Article
2015Crash behavior of ADI steering knuckles
Reißig, L.; Nofal, A.; Böhme, W.; Reichert, T.; Al Masry, H.
Conference Paper
2015Density functional theory and chromium: Insights from the dimers
Würdemann, R.; Kristoffersen, H.H.; Moseler, M.; Walter, M.
Journal Article
2015Density-functional theory study of point defects in Bi2Te3
Hashibon, A.; Elsässer, C.
Book Article
2015Dependence of tribofilm characteristics on the running-in behavior of aluminum-silicon alloys
Stoyanov, P.; Linsler, D.; Schlarb, T.; Scherge, M.; Schwaiger, R.
Journal Article
2015Dislocation injection in strontium titanate by femtosecond laser pulses
Titus, M.S.; Echlin, M.P.; Gumbsch, P.; Pollock, T.M.
Journal Article
2015Does the cyclic J -integral Delta J describe the crack-tip opening displacement in the presence of crack closure?
Metzger, M.; Seifert, T.; Schweizer, C.
Journal Article
2015Effect of rubber polarity on selective wetting of carbon nanotubes in ternary blends
Le, H.H.; Parsaker, M.; Sriharish, M.N.; Henning, S.; Menzel, M.; Wiessner, S.; Das, A.; Do, Q.K.; Heinrich, G.; Radusch, H.J.
Journal Article
2015Einfluss der tribochemischen Schmierstoffoxidation auf die wasserstoffinduzierte Wälzkontaktermüdung
Kürten, Dominik Rainer
Dissertation
2015Einlaufverhalten von geschmierten Stahl-Stahl-Paarungen unter Berücksichtigung der Mikrostruktur
Brink, A.
Dissertation
2015Einlegesohle und Verfahren zu deren Herstellung
Ziegler,Tobias; Jaeger, Raimund; Blömer, Jan
Patent
2015Electrochemical noise analysis of the corrosion of high-purity Mg-Al alloys
Casajús, P.; Winzer, N.
Journal Article
2015Electrospun black titania nanofibers: Influence of hydrogen plasma-induced disorder on the electronic structure and photoelectrochemical performance
Lepcha, A.; Maccato, C.; Mettenbörger, A.; Andreu, T.; Mayrhofer, L.; Walter, M.; Olthof, S.; Ruoko, T.P.; Klein, A.; Moseler, M.; Meerholz, K.; Morante, J.R.; Barreca, D.; Mathur, S.
Journal Article
2015Elektrisch leitfähige Schmierstoffe für adaptive Tribosysteme - Motivation und Synthese von leitfähigen Schmierstoffen
Kailer, A.; Altmann, P.; Grundei, S.; Schubert, T.; Ahrens, M.; Dornhöfer, G.; Dellwo, U.
Conference Paper
2015Energy filtering transmission electron microscopy and atomistic simulations of tribo-induced hybridization change of nanocrystalline diamond coating
Barros Bouchet, M.I. de; Matta, C.; Vacher, B.; Le-Mogne, T.; Martin, J.M.; Lautz, J. von; Ma, T.; Pastewka, L.; Otschik, J.; Gumbsch, P.; Moseler, M.
Journal Article
2015Entwicklung und Anwendung von Methoden zur Simulation des Trocknens von Suspensionen
Breinlinger, Thomas
: Gumbsch, P. (Prüfer); Luding, S. (Prüfer)
Dissertation
2015Ermüdungsverhalten gewickelter CFK Werkstoffe für den Einsatz im Kryodruck-Wasserstoffspeicher
Gall, M.; Luke, M.; Gauch, H.; Hohe, J.
Conference Paper
2015First-principles investigation of hydrogen trapping and diffusion at grain boundaries in nickel
Stefano, D. di; Mrovec, M.; Elsässer, C.
Journal Article
2015First-principles investigation of quantum mechanical effects on the diffusion of hydrogen in iron and nickel
Stefano, D. di; Mrovec, M.; Elsässer, C.
Journal Article
2015Fluorescent concentrators for photovoltaic applications
Goldschmidt, J.C.; Prönneke, L.; Büchtemann, A.; Gutmann, J.; Steidl, L.; Dyrba, M.; Wiegand, M.-C.; Ahrens, B.; Wedel, A.; Schweizer, S.; Bläsi, B.; Zentel, R.; Rau, U.
Book Article
2015Formation and stability of carbon nanotube network in natural rubber: Effect of non-rubber components
Le, H.H.; Pham, T.; Henning, S.; Klehm, J.; Wiessner, S.; Stockelhuber, K.W.; Das, A.; Hoang, X.T.; Do, Q.K.; Wu, M.; Vennemann, N.; Heinrich, G.; Radusch, H.J.
Journal Article
2015Fraunhofer-Institut für Werkstoffmechanik. Jahresbericht 2014
 
Annual Report
2015Generic origin of subgap states in transparent amorphous semiconductor oxides illustrated for the cases of In-Zn-O and In-Sn-O
Körner, W.; Urban, D.F.; Elsässer, C.
Journal Article
2015Gleitkontakt für Hoch- und Ultrahochvakuumanwendungen
Dienwiebel, Martin; Stoyanov, Pantcho; Moseler, Michael
Patent
2015Größeneffekte bei strukturierten tribologischen Wirkflächen
Braun, D.
: Gumbsch, P. (Betreuer)
Dissertation
2015Hierarchical Structure Formation of Nanoparticulate Spray-Dried Composite Aggregates
Zellmer, S.; Garnweitner, G.; Breinlinger, T.; Kraft, T.; Schilde, C.
Journal Article
2015High molecular weight mechanochromic spiropyran main chain copolymers via reproducible microwave-assisted Suzuki polycondensation
Metzler, L.; Reichenbach, T.; Brügner, O.; Komber, H.; Lombeck, F.; Müllers, S.; Hanselmann, R.; Hillebrecht, H.; Walter, M.; Sommer, M.
Journal Article
2015Highly efficient and broadband upconversion of NIR sunlight with neodymium-doped glass ceramics
Skrzypczak, U.; Seifert, G.; Schweizer, S.
Journal Article
2015Hochtemperatur-Werkstoff-Teststrecke II (HWT II) - Begleitende experimentelle und numerische Untersuchungen an Werkstoffen und Komponenten
Hüggenberg, D.; Speicher, M.; Klenk, A.; Zickler, S.; Schwienheer, M.; Wang, Y.; Schmitt, P.; Oesterlin, H.; Maier, G.; Nieweg, B.
Journal Article
2015Implementation of a constitutive model for the mechanical behavior of TWIP steels and validation simulations
Erhart, A.; Haufe, A.; Butz, A.; Zapara, M.; Helm, D.
Journal Article
2015In situ X-ray absorption spectroscopic study of Fe@FexOy/Pd and Fe@FexOy/Cu nanoparticle catalysts prepared by galvanic exchange reactions
Yao, Y.L.; Patzig, C.; Hu, Y.F.; Scott, R.W.J.
Journal Article
2015Influence of composition on the wear properties of boron carbonitride (BCN) coatings deposited by high power impulse magnetron sputtering
Hirte, T.; Feuerfeil, R.; Perez-Solorzano, V.; Wagner, T.A.; Scherge, M.
Journal Article, Conference Paper
2015Influence of dislocation strain fields on the diffusion of interstitial iron impurities in silicon
Ziebarth, B.; Mrovec, M.; Elsässer, C.; Gumbsch, P.
Journal Article
2015Influence of electric potentials on friction of sliding contacts lubricated by an ionic liquid
Dold, C.; Amann, T.; Kailer, A.
Journal Article
2015Influence of electrochemical potentials on the tribological behavior of silicon carbide and diamond-coated silicon carbide
Amann, Tobias; Kailer, Andreas; Herrmann, Mathias
Journal Article
2015Influence of hydrodynamic drag model on shear stress in the simulation of magnetorheological fluids
Lagger, H.G.; Breinlinger, T.; Korvink, J.G.; Moseler, M.; Renzo, A. di; Maio, F. di; Bierwisch, C.
Journal Article
2015Influence of solid solution hardening on creep properties of single-crystal nickel-based superalloys
Fleischmann, E.; Konrad, C.; Preussner, J.; Völkl, R.; Affeldt, E.; Glatzel, U.
Journal Article
2015Influence of specimen geometry and surface quality on the bending strength of short fiber-reinforced C/SiC
Shi, Y.; Koch, D.; Hausherr, J.-M.; Neubrand, A.
Conference Paper
2015Influence of subsurface microstructure on the running-in of an AlSi alloy
Linsler, D.; Schlarb, T.; Weingärtner, T.; Scherge, M.
Journal Article
2015Influences on the thermomechanical fatigue crack growth of the nickel alloy 617
Schlesinger, M.; Schweizer, C.; Brontfeyn, Y.
Journal Article
2015An integrated surrogate modeling approach for materials and approach for materials and process design
Senn, M.; Christensen, S.; Kalidindi, S.; Luo, A.; Madison, J.; Raabe, D.; Sun, X.
Conference Paper
2015The interaction of dislocations and hydrogen-vacancy complexes and its importance for deformation-induced proto nano-voids formation in alpha-Fe
Li, S.Z.; Li, Y.G.; Lo, Y.C.; Neeraj, T.; Srinivasan, R.; Ding, X.D.; Sun, J.; Qi, L.; Gumbsch, P.; Li, J.
Journal Article
2015Interactions between metallic impurities and extended defects in silicon from first-principles
Ziebarth, B.
Dissertation
2015Internal stresses in a homogenized representation of dislocation microstructures
Schmitt, S.; Gumbsch, P.; Schulz, K.
Journal Article
2015Interstitial iron impurities at cores of dissociated dislocations in silicon
Ziebarth, B.; Mrovec, M.; Elsässer, C.; Gumbsch, P.
Journal Article
2015Interstitial iron impurities at grain boundaries in silicon: A first-principles study
Ziebarth, B.; Mrovec, M.; Elsässer, C.; Gumbsch, P.
Journal Article
2015Investigation of cutting-induced damage in CMC bend bars
Neubrand, Achim; Hausherr, Jan Marcel; Lauer, A.; Weiß, Roland J.; Wilhelmi, Christian
Conference Paper
2015Investigation of the corrosion behavior of NiVAl multilayer coatings in hot salt melts
Gurr, M.; Bau, S.; Burmeister, F.; Wirth, M.; Piedra-Gonzalez, E.; Krebser, K.; Preussner, J.; Pfeiffer, W.
Journal Article
2015Lithium ion conduction in LiTi2(PO4)(3) and related compounds based on the NASICON structure:
Lang, B.; Ziebarth, B.; Elsässer, C.
Journal Article
2015Load and frequency interaction effects in dynamic buckling of soft core sandwich structures
Hohe, J.
Journal Article
2015Luminescent borate glass for efficiency enhancement of CdTe solar cells
Steudel, F.; Loos, S.; Ahrens, B.; Schweizer, S.
Journal Article
2015Macroscopic damage modeling for silicon nitride
Ruck, J; Othmani, Y; Lube, T.; Khader, I.; Kailer, A.; Böhlke, T.
Conference Paper
2015Mechanical characterization between room temperature and 1000 °C of SiC free-standing thin films by a novel high-temperature micro-tensile setup
Leisen, D.; Rusanov, R.; Rohlfing, F.; Fuchs, T.; Eberl, C.; Riesch-Oppermann, H.; Kraft, O.
Journal Article
2015Meso-microstructural computational simulation of the hydrogen permeation test to calculate intergranular, grain boundary and effective diffusivities
Jothi, S.; Winzer, N.; Croft, T.N.; Brown, S.G.R.
Journal Article, Conference Paper
2015Micro- and nanotribology of graphene
Dienwiebel, M.; Bennewirt, R.
Book Article
2015Micromechanical modeling of the nonlinear deformation of LFTS under consideration of the effects of interface damage
Fliegener, S.; Hohe, J.; Haspel, B.; Weidenmann, K.A.
Conference Paper
2015Microscale study of frictional properties of graphene in ultra high vacuum
Marchetto, D.; Feser, T.; Dienwiebel, M.
Journal Article
2015Mini-review of electron density visualization
Adler, J.; Adler, O.; Kreif, M.; Cohen, O.; Grosso, B.; Hashibon, A.; Cooper, V.R.
Journal Article, Conference Paper
2015Modeling of self-piercing riveted joints for crash simulation
Bier, M.; Sommer, S.
Conference Paper
2015Modeling of uncertainties in long fiber reinforced thermoplastics
Hohe, J.; Beckmann, C.; Paul, H.
Journal Article
2015Modellierung der Einflüsse von Porenmorphologie auf das Versagensverhalten von Al-Druckgussteilen mit stochastischem Aspekt für durchgängige Simulation von Gießen bis Crash
Andrieux, F.; Fehrenbach, C.; Ma, Y.; Preußner, J.; Sun, D.-Z.; Burblies, B.; Voßmeyer, N.
Report
2015Modellierung des mechanischen Verhaltens von Steckkontakten aus Cu-Ni-Si-Legierungen unter Berücksichtigung der Mikrostruktur
Weber, M.; Helm, D.; Preußner, J.; Pfeffer, K.; Eisenbart, M.; Klotz, U.E.
Conference Paper
2015Modellierung von hochfesten und hochduktilen Blechwerkstoffen aus TWIP-Stahl
Butz, A.; Zapara, M.; Helm, D.
Journal Article
2015Multi-functionality of luminescent glasses for energy applications
Steudel, F.; Loos, S.; Ahrens, B.; Schweizer, S.
Journal Article
2015Multiferroic grain boundaries in oxygen-deficient ferroelectric lead titanate
Shimada, T.; Wang, J.; Ueda, T.; Uratani, Y.; Arisue, K.; Mrovec, M.; Elsässer, C.; Kitamura, T.
Journal Article
2015Multiferroic vacancies at ferroelectric PbTiO3 surfaces
Shimada, T.; Wang, J.; Araki, Y.; Mrovec, M.; Elsasser, C.; Kitamura, T.
Journal Article
2015Multiscale simulation of plasticity in bcc metals
Weygand, D.; Mrovec, M.; Hochrainer, T.; Gumbsch, P.
Journal Article
2015Nanotribology in automotive industry
Dienwiebel, M.; Scherge, M.
Book Article
2015Novel approaches towards highly selective self-powered gas sensors
Hoffmann, M.W.G.; Casals, O.; Gad, A.E.; Mayrhofer, L.; Fàbrega, C.; Caccamo, L.; Hernandez-Ramirez, F.; Lilienkamp, G.; Daum, W.; Moseler, M.; Shen, H.; Waag, A.; Prades, J.D.
Journal Article, Conference Paper
2015Numerische Analysen zur Ausscheidungskinetik und zum viskoplastischen Verformungsverhalten von Cu-Ni-Si-Legierungen
Weber, M.; Preußner, J.; Helm, D.; Eisenbart, M.; Pfeffer, K.; Klotz, U.E.
Journal Article
2015An old workhorse for new applications: Fe(dpm)(3) as a precursor for low-temperature PECVD of iron(III) oxide
Carraro, G.; Maccato, C.; Gasparotto, A.; Barreca, D.; Walter, M.; Mayrhofer, L.; Moseler, M.; Venzo, A.; Seraglia, R.; Marega, C.
Journal Article
2015On Mechanical Metamaterials
Bückmann, T.
: Gumbsch, P. (Betreuer)
Dissertation
2015On the constitutive modelling of twip steels and its application to sheet metal forming simulations
Butz, A.; Zapara, M.; Helm, D.; Haufe, A.; Erhard, A; Schneider, M.; Kampczyk, M.; Stenberg, N.; Hagstrom, J.; Croizet, D.; Biasutti, M.
Conference Paper
2015Optimale Auslegung eines künstlichen Adersystems
Jaeger, R.; Courseau, J.
Abstract
2015Particle-based simulation of sheared magnetorheological fluids
Lagger, Hanna
Dissertation
2015PECVD Prozessüberwachung - Wiederholbare Nutzung technischer Plasmen
Grotjahn, Tobias
Dissertation
2015Peen forming of ceramics - A new chipless shaping technique
Pfeiffer, W.; Höpfel, H.
Conference Paper
2015Polar twin boundaries and nonconventional ferroelectric switching
Salje, E.K.H.; Li, S.; Zhao, Z.; Gumbsch, P.; Ding, X.
Journal Article
2015Properties of black silicon obtained at room-temperature by different plasma modes
Gaudig, M.; Hirsch, J.; Schneider, T.; Sprafke, A.N.; Ziegler, J.; Bernhard, N.; Wehrspohn, R.B.
Journal Article
2015Prozessbegleitendes dynamisches Spannen zur Verzugs- und Eigenspannungsreduzierung beim Schweißen von Bauteilen
Dreibati, O.; Sommer, S.; Marder, C.
: Zäh, M.F.; Gumbsch, P.
Report
2015Quantitative ultrasonic characterization of c-axis oriented polycrystalline AlN thin film for smart device application
Habib, A.; Shelke, A.; Vogel, M.; Brand, S.; Jiang, X.; Pietsch, U.; Banerjee, S.; Kundu, T.
Journal Article
2015Quantitative voxel-to-voxel comparison of TriBeam and DCT strontium titanate three-dimensional data sets
Lenthe, W.C.; Echlin, M.P.; Trenkle, A.; Syha, M.; Gumbsch, P.; Pollock, T.M.
Journal Article
2015Rate dependent behavior of crash-optimized adhesives – experimental characterization, model development, and simulation
May, Michael; Hesebeck, Olaf; Marzi, Stephan H.; Böhme, Wolfgang; Lienhard, Jörg; Kilchert, Sebastian; Brede, Markus; Hiermaier, Stefan
Journal Article
2015Reduced tight-binding models for elemental Si and N, and ordered binary Si-N systems
Gehrmann, J.; Pettifor, D.G.; Kolmogorov, A.N.; Reese, M.; Mrovec, M.; Elsässer, C.; Drautz, R.
Journal Article
2015Residual stress relaxation in welded large components
Farajian, M.; Nitschke-Pagel, T.
Journal Article
2015Robustness and reliability of simulation methods for adhesive joints with highstrengthsteel sheets at crash-conditions
Hesebeck, Olaf; Brede, Markus; Marzi, Stephan H.; Mahnken, Rolf; Nörenberg, Nicole; May, Michael; Kilchert, Sebastian; Voß, Holger; Burbulla, Frank; Matzenmiller, Anton; Böhme, Wolfgang; Fehrenbach, Clemens; Lienhard, Jörg; Memhard, Dieter; Reissig, Lutz
Conference Paper
2015The running-in corridor of lubricated metal-metal contacts
Scherge, M.; Linsler, D.; Schlarb, T.
Journal Article
2015Scanning acoustic GHz-microscopy versus conventional SAM for advanced assessment of ball bond and metal interfaces in microelectronic devices
Vogg, G.; Heidmann, T.; Brand, S.
Journal Article
2015Schädigungsmechanische Modellierung der Rissinitiierungsphase in Schweißverbindungen
Beckmann, C.; Farajian, M.; Hohe, J.; Siegele, D.
Conference Paper
2015Simulation of tape casting: Capabilities and potentials
Polfer, P.; Breinlinger, T.; Kraft, T.
Journal Article
2015Simulation of the influence of surface tension on granule morphology during spray drying using a simple capillary force model
Breinlinger, T.; Hashibon, A.; Kraft, T.
Journal Article
2015Simulation of the spray drying of single granules: The correlation between microscopic forces and granule morphology
Breinlinger, T.; Hashibon, A.; Kraft, T.
Journal Article
2015Simulation und experimentelle Validierung von Temperaturen, Härtegut und Eigenspannungen bei der induktiven Wärmebehandlung
Schweizer, F.; Asperheim, J.-I.; Stiele, H.-J.
Journal Article
2015Der Skibelag. Das unbekannte Wesen
Bonk, C.; Scherge, M.
Journal Article
2015Small-scale multiaxial setup for damage detection into the very high cycle fatigue regime
Straub, T.; Berwind, M.F.; Kennerknecht, T.; Lapusta, Y.; Eberl, C.
Journal Article
2015Standard and customized correlation of crack resistance curves and Charpy upper shelf energy for German reactor pressure vessel steels
Hohe, J.; Siegele, D.; Bechler, E.; Nagel, G.
Journal Article
2015The structure of tribolayers at the commutator and brush interface: A case study of failed and non-failed DC motors
Fakih, B.; Dienwiebel, M.
Journal Article
2015Surface softening in metal-ceramic sliding contacts: An experimental and numerical investigation
Stoyanov, P.; Merz, R.; Romero, P.A.; Wählisch, F.C.; Torrents Abad, O.; Gralla, R.; Stemmer, P.; Kopnarski, M.; Moseler, M.; Bennewitz, R.; Dienwiebel, M.
Journal Article
2015Temperature-dependent luminescence of Tb3+ and Eu3+ single-doped glasses for LED applications
Loos, S.; Steudel, F.; Ahrens, B.; Leonard, R.L.; Johnson, J.A.; Schweizer, S.
Journal Article, Conference Paper
2015Theoretical and experimental study of the core structure and mobility of dislocations and their influence on the ferroelectric polarization in perovskite KNbO3
Hirel, P.; Mark, A.F.; Castillo-Rodriguez, M.; Sigle, W.; Mrovec, M.; Elsässer, C.
Journal Article
2015Theory of sintering in presence of pressure and torque
Nöthe, M.; Rasp, T.; Kraft, T.; Kieback, B.
Journal Article, Conference Paper
2015Thermographic investigation of luminescent barium borate glasses for white-LED applications
Wagner, F.; Nolte, P.W.; Steudel, F.; Schweizer, S.
Conference Paper
2015Three-dimensional shrinkage behavior of green tapes derived from spherical-shaped powders
Fu, Z.; Polfer, P.; Kraft, T.; Roosen, A.
Journal Article
2015Twinning and detwinning during compression-tension loading measured by quasi in situ electron backscatter diffraction tracing in Mg-3Al-Zn rolled sheet
Zheng, L.; Zhang, S.-H.; Helm, D.; Song, H.-W.; Song, G.-S.; Ye, N.-Y.
Journal Article
2015Ultralow friction of steel surfaces using a 1,3-diketone lubricant in the thin film lubrication regime
Li, K.; Amann, T.; List, M.; Walter, M.; Moseler, M.; Kailer, A.; Ruhe, J.
Journal Article
2015Universal concept for the optimization of step sizes in manufacturing processes
Senn, M.; Schweizer, F.; Pfeiffer, W.
Journal Article, Conference Paper
2015Untersuchung des Verschleißverhaltens von keramischen Schneidstoffen im trockenen Gleitreibungskontakt mit Nickelbasislegierungen
Renz, Alexander
Dissertation
2015Untersuchungen an Zylinderlaufbahnen mit neuer galvanisch aufgebrachter Eisenbeschichtung
Beriet, P.; Knapp, A.; Brink, A.; Scherge, M.; Blaszczyk, M.; Möndel, A.; Seidel, K.; Ziegler, G.; Gramm, A.; Gramm, G.
Journal Article
2015Untersuchungen zur Berücksichtigung des Constraint-Einflusses in der analytischen Fehlerbewertung
Dittmann, F.; Varfolomeev, I.; Schuster, L.; Kaffenberger, M.
Conference Paper
2015Untersuchungen zur Kriechermüdungswechselwirkung in der hochwarmfesten Legierung Alloy 800H
Hübsch, O.; Maier, G.; Riedel, H.; Klöwer, J.; Maas, P.
Conference Paper
2015Up-conversion materials for enhanced efficiency of solar cells
Goldschmidt, J.C.; Fischer, S.; Steinkemper, H.; Herter, B.; Wolf, S.; Hallermann, F.; Plessen, G. von; Johnson, J.; Ahrens, B.; Miclea, P.-T.; Schweizer, S.
Book Article
2015Verbesserung lokaler Spaltbruchmodelle unter Berücksichtigung mikromechanischer Vorgänge
Hardenacke, V.
Dissertation
2015Visualization of electronic density
Grosso, B.; Cooper, V.R.; Pine, P.; Hashibon, A.; Yaish, Y.; Adler, J.
Journal Article
2015Wear of abrasive media and its effect on abrasive flow machining results
Bremerstein, Tina; Potthoff, Annegret; Michaelis, Alexander; Schmiedel, Christian; Uhlmann, Eckart; Blug, Bernhard; Amann, Tobias
Journal Article
2015Wear properties of chromium carbide based HVOF and HVAF thermal spray coatings up to 800°C
Janka, Leo; Norpoth, Jonas; Rodriguez Ripoll, Manel; Katsich, Christian; Trache, Richard; Toma, Filofteia-Laura; Thiele, Sven; Berger, Lutz-Michael
Conference Paper
2015Weiterentwicklung von Rechenmethoden zur probabilistischen Leck-vor-Bruch Bewertung von Rohrleitungen. Abschlussbericht
Ivanov, D.; Varfolomeev, I.; Siegele, D.
Report
2015With electroluminescence microcopy towards more reliable AlGaN/GaN transistors
Baeumler, M.; Dammann, M.; Wespel, M.; George, R.; Konstanzer, H.; Maroldt, S.; Polyakov, V.M.; Müller, S.; Bronner, W.; Brueckner, P.; Benkhelifa, F.; Waltereit, P.; Quay, R.; Mikulla, M.; Wagner, J.; Ambacher, O.; Graff, A.; Altmann, F.; Simon-Najasek, M.; Lorenzini, M.; Fagerlind, M.; Wel, P. van der; Roedle, T.
Conference Paper
2015ZERODUR®: New stress corrosion data improve strength fatigue prediction
Hartmann, P.; Kleer, G.; Rist, T.
Conference Paper
2015Zur Tribologie von strukturierten Skibelägen auf Eis und Schnee
Böttcher, R.
Dissertation