Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
20205G-basierte Sensorik zur Überwachung der Produktion - Erprobung der 5G Mobilfunktechnologie in der Produktion auf dem 5G-Industry Campus Europe
Schmitt, Sarah; Jung, Sven; König, Niels; Schmitt, Robert H.
Journal Article
2020The biological transformation of industrial manufacturing - Technologies, status and scenarios for a sustainable future of the German manufacturing industry
Miehe, Robert; Bauernhansl, Thomas; Beckett, Marc; Brecher, Christian; Demmer, Axel; Drossel, Welf-Guntram; Elfert, Patrick; Full, Johannes; Hellmich, Arvid; Hinxlage, Julian; Horbelt, Jessica; Jutz, G.; Krieg, S.; Maufroy, Christophe; Noack, Marian; Sauer, Alexander; Schließmann, Ursula; Scholz, Paul; Schwarz, Oliver; Ten Hompel, Michael; Wrycza, Philipp; Wolperdinger, Markus
Journal Article
2020Evaluation of Industry 4.0 Data formats for Digital Twin of Optical Components
Schmetz, Arno; Lee, Tae Hun; Hoeren, Maximilian; Berger, Marvin; Ehret, Susanne; Zontar, Daniel; Min, Soo-Hong; Ahn, Sung-Hoon; Brecher, Christian
Journal Article
2020Modeling of thermo-viscoelastic material behavior of glass over a wide temperature range in glass compression molding
Vu, Anh Tuan; Vu, Anh Ngoc; Grunwald, Tim; Bergs, Thomas
Journal Article
2020Numerical and experimental determinations of contact heat transfer coefficients in nonisothermal glass molding
Vu, A.T.; Helmig, T.; Vu, A.N.; Frekers, Y.; Grunwald, T.; Kneer, R.; Bergs, T.
Journal Article
2020Piezobasierte Werkzeugtechnologie zur replikativen Herstellung abbildender Mikrooptiken aus Kunststoff
Meiers, Bernd
Dissertation
2020Die Produktion digitalisieren. Mit 5G und smarter Sensorik
Schmitt, Sarah; Jung, Sven; Lefteroff, Maike
Journal Article
2020PtIr protective coating system for precision glass molding tools
Friedrichs, Marcel; Peng, Zirong; Grunwald, Tim; Rohwerder, Michael; Gault, Baptiste; Bergs, Thomas
Journal Article
2020Temperature variation during continuous laser-assisted adjacent hoop winding of type-IV pressure vessels: An experimental analysis
Zaami, Amin; Schäkel, Martin; Baran, Ismet; Bor, Ton C.; Janssen, Henning; Akkerman, Remko
Journal Article
2020Verschleiß der Umformwerkzeuge beim Präzisionsblankpressen von Quarzglas
Dukwen, Julia
Dissertation
20195G Networked Aerospace Production
Becker, Paul; König, Niels; Gierlings, Sascha; Venek, Tommy; Bergs, Thomas; Schmitt, Robert
Journal Article
2019Adaptive scheduling through machine learning-based process parameter prediction
Frye, Maik; Gyulai, David; Bergmann, Julia; Schmitt, Robert H.
Journal Article
2019Adaptive, connected production of hybrid thermoplastic prototypes
Schulz, M.; Janssen, H.; Brecher, C.
Journal Article
2019Adopting automation for the manufacture of cell products - considerations and best practices
Ochs, Jelena
Electronic Publication
2019Advanced production of thermoplastic composite pipes
Schäkel, Martin; Peters, Tido; Janssen, Henning; Brecher, Christian
Journal Article
2019Agile Invention: Zehn Erfolgsthesen
Schuh, Günther; Kreutzer, Ramon; Vogt, Florian; Schwarberg, Thomas
Journal Article
2019Automated and Predictive Risk Assessment in Modern Manufacturing Based on Machine Learning
Müller, Tobias; Kiesel, Raphael; Schmitt, Robert
Conference Paper
2019Automated sprue removal from injection moulded micro-optics with ultrasonic cutting
Berger, Marvin; Hoeren, Maximilian; Sauer, Sebastian; Müller, Tobias; Zontar, Daniel; Brecher, Christian
Conference Paper
2019Automation in cell and gene therapy manufacturing: From past to future
Moutsantsou, Panagiota; Ochs, Jelena; Schmitt, Robert; Hewitt, Christopher; Hanga, Maria Petronela
Journal Article
2019BabyLux device: A diffuse optical system integrating diffuse correlation spectroscopy and time-resolved near-infrared spectroscopy for the neuromonitoring of the premature newborn brain
Giovannella, M.; Contini, D.; Pagliazzi, M.; Pifferi, A.; Spinelli, L.; Erdmann, R.; Donat, R.; Rocchetti, I.; Rehberger, M.; König, N.; Schmitt, R.; Torricelli, A.; Durduran, T.; Weigel, U.M.
Journal Article
2019Biointelligenz. Eine neue Perspektive für nachhaltige industrielle Wertschöpfung
Beckett, Marc; Demmer, Axel; Elfert, Patrik; Full, Johannes; Hellmich, Arvid; Hien, Katharina; Hinxlage, Julian; Horbelt, Jessica; Jutz, Günther; Krieg, Sabine; Maufroy, Christophe; Miehe, Robert; Noack, Marian; Sauer, Alexander; Schließmann, Ursula; Scholz, Patrick; Schwarz, Oliver; Wrycza, Philipp
: Bauernhansl, Thomas (Hrsg.); Brecher, Christian (Hrsg.); Drossel, Welf-Guntram (Hrsg.); Gumbsch, Peter (Hrsg.); Ten Hompel, Michael (Hrsg.); Wolperdinger, Markus (Hrsg.)
Study
2019The Biological Transformation of Industrial Manufacturing - Future Fields of Action in Bioinspired and Bio-based Production Technologies and Organization
Miehe, Robert; Full, Johannes; Scholz, Patrick; Demmer, Axel; Bauernhansl, Thomas; Sauer, A.; Schuh, Günther
Journal Article, Conference Paper
2019Bionisch funktionalisierte Oberflächen durch laserbasierte Nachbildung der Schuppenstruktur feuchtigkeitserntender Echsen "BioLas.exe"
Comanns, Philipp; Winands, Kai; Pothen, Mario; Mescheder, Holger
Report
2019Eine Branche im Umbruch - Den technologischen Wandel in der Automobilindustrie gestalten. Whitepaper
Schuh, Günther; Zeller, Paul; Scholz, Paul; Krebs, Leonie; Studerus, Bastian
Study
2019Certification of AI-Supported Production Processes
Brandstätter, Tobias Claus; Krauß, Jonathan; Schmitt, Robert H.
Conference Paper
2019A cloud-to-edge architecture for predictive analytics
Bowden, David; Marguglio, Angelo; Morabito, Lucrezia; Napione, Chiara; Panicucci, Simone; Nikolakis, Nikolaos; Makris, Sotiris; Coppo, Guido; Andolina, Salvatore; Macii, Alberto; Macii, Enrico; O'Mahony, Niamh; Becker, Paul; Jung, Sven
Conference Paper
2019Configuration of corporate incubators
Schuh, Günther; Lau, Felix; Vogt, Florian; Zimmermann, Richard
Study
2019Context-Specific Influencing Factors within a Transfer of Innovation from Corporate Incubators
Schuh, Günther; Vogt, Florian; Maurer, Dennis
Journal Article
2019Descemet's Membrane Biomimetic Microtopography Differentiates Human Mesenchymal Stem Cells Into Corneal Endothelial-Like Cells
Gutermuth, A.; Maassen, J.; Harnisch, E.; Kuhlen, D.; Sauer-Budge, A.; Skazik-Voogt, C.; Engelmann, K.
Journal Article
2019Development of a decision logic for the selection of a flexible robotic system for the automated manufacturing in tooling
Wilms, Marcel; Bergs, Thomas; Arntz, Kristian; Johannsen, Lars; Strassburg, Simon
Journal Article, Conference Paper
2019Development of a substrate unit for LPBF to increase automatization in manufacturing process chains
Maslo, Semir; Wollbrink, Moritz; Arntz, Kristian; Degen, Florian; Zimmer, Daniel
Conference Paper
2019Digital assistance during manual FRP manufacturing
Kostyszyn, Kevin; Schäkel, Martin; Grunert, Dennis; Peters, Tido; Schmitt, Robert
Journal Article
2019A Digital Shadow for the Infrared-based Tape Laying Process of Tailored Blanks out of Thermoplastic Unidirectional Tape
Schulz, Malena; Janssen, Henning; Brecher, Christian
Journal Article, Conference Paper
2019Einsatz von Drahterosion im Werkzeugbau
Olivier, Marcel; Klink, Andreas; Prümmer, Marcel
Book Article
2019Erfolgreich digitale Fräsprozessketten umsetzen im Werkzeugbau
Boos, Wolfgang; Arntz, Kristian; Degen, Florian; Wollbrink, Moritz; Gerretz, Vincent; Lee, Tae Hun; Pothen, Mario; Venek, Tommy; Landwehr, Markus; Maurer, Felix Konstantin; Henrichs, Oliver; Lowis, Steffen
Study
2019Evaluation of mold materials for precision glass molding
Friedrichs, Marcel; Grunwald, Tim; Bergs, Thomas
Conference Paper
2019Experimental investigation of contact heat transfer coefficients in nonisothermal glass molding by infrared thermography
Vu, A.T.; Vu, A.N.; Liu, G.; Grunwald, T.; Dambon, O.; Klocke, F.; Bergs, T.
Journal Article
2019A Fog Computing Approach for Predictive Maintenance
Cerquitelli, T.; Bowden, D.; Marguglio, A.; Morabito, L.; Napione, C.; Panicucci, S.; Nikolakis, N.; Makris, S.; Coppo, G.; Andolina, S.; Macii, A.; Macii, E.; O'Mahony, N.; Becker, P.; Jung, S.
Conference Paper
2019Frei verkettete Montagesysteme ­- Auftragsplanung und Informationsbereitstellung für die neue Montageorganisation
Grunert, Dennis; Lettmann, Pascal; Löffler, Paolo; Hüttemann, Guido; Schmitt, Robert
Journal Article
2019Gestaltung des Technologieeinkaufs für Start-ups und mittelständische Unternehmen
Kreimeier, Matthias
Dissertation
2019Hybrid modeling of thermo-elastic behavior of a three-axis machining center using integral deformation sensors
Brecher, Christian; Lee, Tae Hun; Tzanetos, Filippos; Zontar, Daniel
Journal Article, Conference Paper
2019Impact of the Oil Temperature on the Frictional Behavior of Laser-Structured Surfaces
Janssen, A.; Dadgar, M.; Wietheger, W.
Journal Article
2019Increasing resource efficiency with an engineering decision support system for comparison of product design variants
Buchert, Tom; Ko, Nathanael; Graf, Roberta; Vollmer, Thomas; Alkhayat, Moritz; Brandenburg, Elisabeth; Stark, Rainer; Klocke, Fritz; Leistner, Philip; Schleifenbaum, Johannes Henrich
Journal Article
2019Individualisierte Fertigung von faserverstärkten Hybridbauteilen
Hopmann, Christian; Ophüls, Max; Schulz, Malena; Janssen, Henning
Journal Article
2019Industrie 4.0 in praxisnaher Anwendung - Vom Retrofit über Datenspeicherung zum maschinellen Lernen am Beispiel der Glasumformung
Mende, Hendrik; Vogel, Paul-Alexander; Padrón Hinrichs, Marcos; Schmitt, Robert
Journal Article
2019Influence of Elevated Intra-abdominal Pressure on Suture Tension Dynamics in a Porcine Model
Schachtrupp, A.; Wetter, O.; Höer, J.
Journal Article
2019Influence of Glassy Carbon Surface Finishing on its Wear Behavior during Precision Glass Moulding of Fused Silica
Grunwald, Tim; Wilhelm, Dennis Patrick; Dambon, Olaf; Bergs, Thomas
Journal Article
2019Integrated Energy Efficiency in Production
Heutmann, Timo; Zhou, Beiyan; Schommer, C.; Schmitt, R.H.
Journal Article
2019Investigation of the negative influence of cooling lubricants on the deformation of the machine tool structure
Brecher, Christian; Tzanetos, Filippos; Zontar, Daniel
Conference Paper
2019Karosseriebauteile lokal verstärken
Straeten, Kira van der; Kukla, Christian
Journal Article
2019Kollaboration sorgt für nächsten Schub
Schuh, Günther; Scholz, Paul
Journal Article
2019Korrekturmodelle thermisch bedingter TCP-Verlagerungen mit Hilfe maschinenintegrierter Verformungssensoren
Klatte, Michel
Dissertation
2019Lab-on-a Disc - Automated Production of Microfluidic Systmes
Berger, Marvin; Voebel, Toni; Rohrbeck, Malte; Zontar, Daniel; Ducrée, Jens; Brecher, Christian
Poster
2019Leitsysteme 4.0: Herausforderungen und Potenziale der Industrie 4.0 für flexible Produktionsleitsysteme
Jung, Sven; Schnichels, Alexander; Schmitt, Robert; Kuhlenkötter, Bernd; Prinz, Christopher
Journal Article
2019A load-adaptive and predictive control of energy-efficient building automation in production environment
Zhou, Beiyan; Chikkala, Jayaaditya; Schmitt, Robert
Journal Article, Conference Paper
2019Locally Reinforced Auto Body Parts
Straeten, Kira van der; Kukla, Christian
Journal Article
2019Lokale Blecherwärmung steigert Bearbeitungsqualität
Schmidt, Florian
Journal Article
2019Methodology for Integration of Additive Manufacturing in Tool Manufacturing Process Chains
Bergs, Thomas; Arntz, Kristian; Wollbrink, Moritz
Conference Paper
2019Methodology for Integration of Additive Manufacturing in Tool Manufacturing Process Chains
Wollbrink, Moritz; Prümmer, Marcel; Arntz, Kristian; Bergs, Thomas
Conference Paper
2019Model Predictive Force Control in Grinding based on a Lightweight Robot
Husmann, S.; Stemmler, S.; Hähnel, Sebastian; Vogelgesang, S.; Abel, D.; Bergs, Thomas
Journal Article
2019Modeling and Optimizing Data Transfer in GPU-Accelerated Optical Coherence Tomography
Schrödter, Tobias; Pallasch, David; Wienke, Sandra; Schmitt, Robert; Müller, Matthias S.
Conference Paper
2019Modell zur typenbasierten Gestaltung von firmeninternen Inkubatoren
Lau, Felix
Dissertation
2019Modellbasierte, adaptive Prozessregelung für das Laserstrahlstrukturieren
Pothen, Mario
Dissertation
2019Modellierung des Schleifprozesses beim Einsatz von gummigebundenen Schleifscheiben
Kretschmer, Arne
Dissertation
2019Need-based technology development of a scenario specific fuel cell for commercial vehicles
Baum, Christoph; Scholz, Paul
Conference Paper
2019Next level production networks
Friedli, T.; Schuh, G.; Lanza, G.; Remling, D.; Gützlaff, A.; Stamer, F.
Journal Article
2019Offline development of active-alignment-algorithms by efficient interpolation of discrete databases
Hoeren, Maximilian; Zontar, Daniel; Sauer, Sebastian; Schmetz, Arno; Berger, Marvin; Müller, Tobias; Brecher, Christian
Conference Paper
2019Periphery evaluation for interlinked manufacturing systems in industrial tooling
Prümmer, Marcel; Bergs, Thomas; Arntz, Kristian; Lürken, Christian
Journal Article, Conference Paper
2019Planung und Steuerung von frei verketteten Montagesystemen. Zuordnung von Aufträgen zu Montageressourcen in der Planung und im Betrieb
Göppert, A.; Lettmann, P.; Jung, Sven; Grunert, Dennis; Hüttemann, G.; Schmitt, Robert H.
Journal Article
2019Prädikatives Risikomanagement in der Produktion - Mit MES Ausschüsse reduzieren und Fertigungsfehler vermeiden
Fath, Daniel; Möller, Michael; Kiesel, Raphael; Schmitt, Robert; Müller, Tobias
Journal Article
2019Prädiktive Werkzeug- und Prozessauslegung für das Räumen von Nickelbasislegierungen mit Hartmetallwerkzeugen
Seimann, Martin
Dissertation
2019Predictive control of a synchronized individual production
Heutmann, Timo; Schmitt, Robert
Journal Article, Conference Paper
2019Process optimization of wire-based laser metal deposition of titanium
Schulz, M.; Klocke, F.; Riepe, J.; Klingbeil, N.; Arntz, K.
Journal Article
2019Production strategies for the medical technology of tomorrow. Trend report
Ochs, Jelena; Berger, Marvin; Harnisch, Emely; Helden, Jonathan von; Jung, Sven; Kostyszyn, Kevin; Krauss, Jonathan; König, Niels; Skazik-Voogt, Claudia
Report
2019Produktionsstrategien für die Medizintechnik von morgen. Trendreport
Ochs, Jelena; Berger, Marvin; Harnisch, Emely; Helden, Jonathan von; Jung, Sven; Kostyszyn, Kevin; Krauss, Jonathan; König, Niels; Skazik-Voogt, Claudia
Report
2019Pulsed Laser Influence on Two-Beam Laser Metal Deposition
Bergs, Thomas; Schulz, Martin; Gipperich, Marius; Riepe, Jan; Arntz, Kristian
Conference Paper
2019Pure waterjet controlled depth machining for stripping ceramic thermal barrier coatings on turbine blades
Bergs, Thomas; Borrmann, J.P.; Schüler, Manuel; Herrig, Tim; Döring, J.-E.
Journal Article, Conference Paper
2019Quality Improvement of Milling Processes Using Machine Learning-Algorithms
Frye, Maik; Schmitt, Robert H.
Conference Paper
2019Quantification of value added structure shifts and strategic reorientation by means of diversification analyses
Scholz, Paul; Schuh, Günther; Kreutzer, Ramon
Conference Paper
2019Quantitative articular cartilage sub-surface defect assessment using optical coherence tomography
Michalik, R.; Pauer, T.; Brill, N.; Knobe, M.; Tingart, M.; Jahr, H.; Truhn, D.; Nebelung, S.
Journal Article
2019Replicative manufacturing of glass optics with functional microstructures
Rojacher, Cornelia; Grunwald, Tim; Bergs, Thomas
Conference Paper
2019Schwingungsunterstütztes Stirnschleifen. Schwingungsunterstütztes Schleifen von Gusseisen zur Reduktion kinematisch bedingter Schleifspuren
Hähnel, Sebastian; Hoff, S.; Grunwald, Tim; Bergs, Thomas
Journal Article
2019Simulation of electrical conductivity for nanoparticles and nanotubes composite sensor according to geometrical properties of nanomaterials
Min, Soo-Hong; Lee, Tae Hun; Lee, Sangwook; Song, Ji-Hyeon; Lee, Gil-Yong; Zontar, Daniel; Brecher, Christian; Ahn, Sung-Hoon
Journal Article
2019Technische Heimaten für menschliche Zellen
Leyens, Christoph; Klotzbach, Udo; Sonntag, Frank; Wolperdinger, Markus; Loskill, Peter; Bauernhansl, Thomas; Traube, Andreas; Brecher, Christian; Schmitt, Robert; König, Niels
Book Article
2019Technologiefrüherkennung gestalten - Acht Erfolgsfaktoren. Whitepaper
Schuh, Günther; Scheuer, Thomas
Study
2019Temperature analysis for the laser-assisted tape winding process of multi-layered composite pipes
Schäkel, Martin; Hosseini, S.M. Amin; Janssen, Henning; Baran, Ismet; Brecher, Christian
Journal Article, Conference Paper
2019Temperature calculation in metal substrates during two-photon polymerization
Harnisch, Emely; Venek, Tommy; Nohr, Svenja; König, Niels; Schmitt, Robert
Journal Article
2019Thermal Skin Effect in Laser-Assisted Tape Placement of Thermoplastic Composites
Weiler, Thomas
Dissertation
2019Transfer von Innovationen aus Corporate Inkubatoren. Whitepaper - Empirische Studie
Schuh, Günther; Vogt, Florian; Maurer, Dennis
Study
2019Two-photon polymerization on metal surfaces for structuring moulding tools
Harnisch, Emely
Dissertation
2019Ultrapräzisionszerspanung von Hartmetall mit monokristallinen Diamantwerkzeugen
Doetz, Marius
Dissertation
2019Untersuchung des Drahtsystems zur Prozessstabilisierung für das drahtbasierte Laserauftragschweißen in der additiven Fertigung
Klingbeil, Nils
Dissertation
2019Verfahren zur kombinierten Form- und Zentrierprüfung mikrooptischer Asphären mit optischer Kohärenztomographie
Riediger, Max; Schmitt, Robert
Journal Article
2019Wirksamkeit tribologischer Mikrostrukturen bei extremen Einsatzbedingungen und Ableitung eines Fertigungsmodells für das UKP-Laserabtragen
Janssen, Andreas
Dissertation
2019Wirtschaftliche Produktion von FVK-Automobilbauteilen. Lösungen für den Antriebsstrang der Zukunft
Schulz, Malena
Electronic Publication
20186 steps to EN 9100 certification
Vollmer, Thomas; Bünck, Matthias; Niedermeyer, Angela; Schulte, Tobias; Schmitt, Robert
Journal Article
2018Agile Einheiten werden Taktgeber
Schuh, Günther; Kreutzer, Ramon; Patzwald, Marc
Journal Article, Conference Paper
2018Analysis of form deviation in non-isothermal glass molding
Kreilkamp, Holger; Grunwald, Tim; Dambon, Olaf; Klocke, Fritz
Conference Paper
2018Approach for zero defect manufacturing: Geometric calibration of five-axis machine tools for blisk manufacturing process
Lee, T.H.; Behrens, J.; Gierlings, S.; Brecher, C.
Conference Paper
2018Automated assembly of lens barrels with active wavefront sensor guiding
Berger, Marvin; Müller, Tobias; Meiers, Bernd; Sauer, Sebastian; Krappig, Reik; Baum, Christoph; Brecher, Christian
Conference Paper
2018Automated assembly of microfluidic "lab-on-a-disc"
Berger, Marvin; Müller, Tobias; Voebel, Toni; Baum, Christoph; Glennon, T.; Mishra, R.; Kinahan, D.; King, D.; Ducrée, J.; Brecher, Christian
Conference Paper
2018Automated polarization control for the precise alignment of laser-induced self-organized nanostructures
Hermens, Ulrike; Pothen, Mario; Winands, Kai; Arntz, Kristian; Klocke, Fritz
Journal Article
2018Automated shaping of laser-induced nanoripples on freeform surfaces
Hermens, Ulrike
Poster
2018A Bayesian approach to process model evaluation in short run SPC
Permin, Eike; Voigtmann, Christoph; Schmitt, Robert H.
Journal Article
2018Ein Beitrag zur Modellierung des thermischen Umgebungseinflusses an Werkzeugmaschinen
Brecher, Christian; Kneer, Reinhold; Spierling, Robert; Frekers, Yona; Fey, Marcel
Journal Article
2018Benchmarking des Senkerosionsprozesses
Klink, Andreas; Schneider, Sebastian; Prümmer, Marcel
Book Article
2018Berücksichtigung der Zeitunsicherheit für eine robuste, synchronisierte Einzelfertigung
Heutmann, Timo; Tils, Alexander; Schmitt, Robert
Conference Paper
2018Bias voltage effect on the mechanical properties, adhesion and milling performance of PVD films on cemented carbide inserts
Skordaris, G.; Bouzakis, K.-D.; Charalampous, P.; Kotsanis, T.; Bouzakis, E.; Bejjani, R.
Journal Article
2018Bias voltage optimum adjustment considering coatings' strength and adhesion requirements when cutting various steels
Skordaris, G.; Bouzakis, K.-D.; Kotsanis, T.; Charalampous, P.; Bouzakis, E.; Bejjani, R.
Journal Article
2018Characteristics of Disruptive Innovations. A Description Model Focused on Technical products
Schuh, Günther; Wetterney, Tim; Vogt, Florian
Conference Paper
2018A characterization of quality of sheared edge in fine blanking using edge-computing approach
Trauth, Daniel; Stanke, Joachim; Feuerhack, Andreas; Bergs, Thomas; Mattfeld, Patrick; Klocke, Fritz
Journal Article, Conference Paper
2018A Comparative Study of Polarity-related Effects in Single Discharge EDM of Titanium and Iron Alloys
Klocke, F.; Mohammadnejad, M.; Holsten, M.; Ehle, L.; Zeis, M.; Klink, A.
Journal Article, Conference Paper
2018The connected worker
Plutz, Martin
Journal Article
2018Continuous-flow, microfluidic, qRT-PCR system for RNA virus detection
Fernández-Carballo, B. Leticia; McBeth, Christine; McGuiness, Ian; Kalashnikov, Maxim; Baum, Christoph; Borrós, Salvador; Sharon, Andre; Sauer-Budge, Alexis F.
Journal Article
2018A critical review of FEM models to simulate the nano-impact test on PVD coatings
Skordaris, G.; Bouzakis, K.; Charalampous, P.
Conference Paper
2018Cutting force model for gear honing
Bergs, T.
Journal Article
2018Damage Evolution in Nakajima Tests of DP800 Dual Phase Steel
Bergs, T.; Nick, M.; Trauth, D.; Klocke, F.
Conference Paper
2018Data Collection and Analysis for the Creation of a Digital Shadow During the Production of Thermoplastic Composite Layers in Unbonded Flexible Pipes
Schäkel, Martin; McNab, John; Dodds, Neville; Peters, Tido; Janssen, Henning; Brecher, Christian
Conference Paper
2018Datenbedarfe für eine energie-flexible Produktionsplanung und -steuerung
Schuh, Günther; Schmitt, Robert; Prote, Jan-Philipp; Ellerich, Max; Thomas, Katharina; Chhor, Jimmy; Sauermann, Frederick; Funk, Franziska Katharina
Journal Article
2018Definition of smart retrofitting: First steps for a company to deploy aspects of industry 4.0
Guerreiro, Bruno V.; Lins, Romulo G.; Sun, Jianing; Schmitt, Robert
Conference Paper
2018Den Fluidtransport bei Echsen verstehen
Winands, Kai
Journal Article
2018Den Wert der Daten korrelieren. Wertschöpfung mit Big Data
Dorißen, Jonas; Krauß, Jonathan; Mende, Hendrik; Niendorf, Laura
Journal Article
2018Deriving requirements for the organizational structure of corporate incubators
Schuh, G.; Lau, F.; Dyba, C.; Vogt, F.
Conference Paper
2018Design and function for freeform surfaces. How to texture 3D parts with micro- and nanostructures automated and distortion-free
Mescheder, Holger; Hermens, Ulrike
Journal Article
2018Design framework for model-based self-optimizing manufacturing systems
Thombansen, Ulrich; Buchholz, Guido; Frank, Daniel; Heinisch, Julian; Kemper, Maximilian; Pullen, Thomas; Reimer, Viktor; Rotshteyn, Grigory; Schwenzer, Max; Stemmler, Sebastian; Abel, Dirk; Gries, Thomas; Hopmann, Christian; Klocke, Fritz; Poprawe, Reinhart; Reisgen, Uwe; Schmitt, Robert
Journal Article
2018Digitalisierung verstehen und erleben
Schuh, G.; Mühlbradt, T.; Prote, J.-P.; Gützlaff, A.; Ays, J.; Schmidhuber, M.; Schlosser, T.; Steinberger, V.
Journal Article
2018Digitalized glass optics production
Staasmeyer, J.-H.; Liu, G.; Dambon, O.
Conference Paper
2018Disruption-oriented product planning: Towards a framework for a planning process for disruptive products
Schuh, G.; Wetterney, T.; Lau, F.; Schmidt, T.
Conference Paper
2018Ductile grinding of tungsten carbide applying standard CNC machines
Doetz, M.; Dambon, O.; Klocke, F.; Vogt, C.; Rascher, R.; Faehnle, O.
Conference Paper
2018Ductile grinding of tungsten carbide molds applying standard CNC machines
Vogt, C.; Fähnle, O.; Rascher, R.; Doetz, M.; Dambon, O.; Klocke, F.
Conference Paper
2018Ductile mode single point diamond turning (SPDT) of binderless tungsten carbide molds
Doetz, M.; Dambon, O.; Klocke, F.; Vogt, C.; Rascher, R.; Fähnle, O.
Conference Paper
2018Echtzeit-Maschinendaten auf mobile Endgeräte bringen: Smart visualisiert
Lindner, Florian; Permin, Eike; Schmitt, Robert; Gesthuysen, Frederik
Journal Article
2018Effect of niobium on microstructure-property relationship in H11 hot-work tool steel via wire- and powder-based laser metal deposition
Teli, M.; Klocke, F.; Arntz, K.; Winands, K.
Journal Article
2018Energieeffizient vernetzen. Energiemanagement
Zhou, Beiyan
Journal Article
2018Erfolgreich CAx-Prozessketten Gestalten im Werkzeugbau
Boos, Wolfgang; Arntz, Kristian; Prümmer, Marcel; Wollbrink, Moritz; Horstkotte, Rainer; Pothen, Mario; Gerretz, Vincent
Study
2018Erfolgreich Fräsen im Werkzeugbau
Boos, Wolfgang; Arntz, Kristian; Johannsen, Lars; Prümmer, Marcel; Horstkotte, Rainer; Ganser, Philipp; Venek, Tommy; Gerretz, Vincent
Study
2018Erfolgsfaktoren im Technologiemanagement
Schuh, Günther; Zeller, Paul
Study
2018Excellence in Production 2018
Prümmer, Marcel; Helbig, Jens; Horstkotte, Rainer; Ebbecke, Christoph
Book Article
2018Experimental and numerical investigation of dual phase steels formability during laser-assisted hole-flanging
Motaman, S.A.H.; Komerla, K.; Storms, T.; Prahl, U.; Brecher, C.; Bleck, W.
Conference Paper
2018The external scent efferent system of selected European true bugs (Heteroptera): A biomimetic inspiration for passive, unidirectional fluid transport
Hischen, Florian; Buchberger, Gerda; Plamadeala, Cristina; Armbruster, Oskar; Heiss, Ernst; Winands, Kai; Schwarz, Martin; Jüttler, Bert; Heitz, Johannes; Baumgartner, Werner
Journal Article
2018Frei verkettete Montagesysteme - Ein Ausblick
Göppert, Amon; Hüttemann, Guido; Jung, Sven; Grunert, Dennis; Schmitt, Robert H.
Journal Article
2018Freiformflächen mit dem Laser gezielt strukturieren
Mescheder, Holger; Hermens, Ulrike
Journal Article
2018From turning to grinding: Ductile machining with gPVA
Vogt, C.; Fähnle, O.; Rascher, R.; Doetz, M.; Dambon, O.; Klocke, F.
Conference Paper
2018Functional reliability of cognitive control systems for manufacturing processes
Permin, Eike; Lossie, Karl; Schmitt, Robert H.
Journal Article
2018Hellsehen in vier Schritten. Data Analytics für das digitale Qualitätsmanagement
Elser, Hannes; Heutmann, Timo; Lindemann, Marie; Schmitt, Robert
Journal Article
2018Highly modular and generic control software for adaptive cell processing on automated production platforms
Jung, Sven; Ochs, Jelena; Kulik, Michael; König, Niels; Schmitt, Robert H.
Journal Article, Conference Paper
2018How additive manufacturing can shape an industry 4.0 environment
Müller, Bernhard; Frieß, Uwe; Langer, Tino; Töppel, Thomas; Gebauer, Mathias; Klaeger, Uwe; Wollbrink, Moritz; Zöllner, Volker; Lausch, Holger
Presentation
2018Im Dreischritt zu Qualität 4.0. Wege zum vorausschauenden Qualitätsmanagement
Heutmann, Timo; Schmitt, Robert
Journal Article
2018Implementierte Industrie
Schmitt, Robert; Kiesel, Raphael; Vollmer, Thomas
Journal Article
2018Improving the cutting performance of coated tools via appropriate pre- and post-treatments
Bouzakis, K.; Skordaris, G.; Bouzakis, E.; Kotsanis, T.
Conference Paper
2018Increasing critcal depth of cut in ductile mode machining of tungsten carbide by process parameter controlling
Doetz, M.; Dambon, O.; Klocke, F.; Lee, J.; Fähnle, O.; Langenbach, E.
Conference Paper
2018The influence of the tape placement process on part characteristics based on different Ud-tape qualities
Schulz, M.; Buschhoff, C.; Janssen, H.; Brecher, C.
Conference Paper
2018Instrument zur Steigerung des branchenübergreifenden Verwertungspotenzials von Fertigungstechnologien
Graw, Myron
Dissertation
2018Integration of machining system capability information into a CAx software environment for complex tool trajectory prediction
Szipka, K.; Dax, P.; Archenti, A.; Degen, F.; Hedlind, M.
Journal Article, Conference Paper
2018Investigation on the Variability of Existing Models for Simulation of Local Temperature Field during a Single Discharge for Electrical Discharge Machining (EDM)
Klocke, F.; Mohammadnejad, M.; Zeis, M.; Klink, A.
Journal Article, Conference Paper
2018IT-Sicherheit in der vernetzten Produktion. Wertschöpfungssteigerung in der Produktion dank sicherer cyberphysischer Systeme
Schlenker, Nadine; Reusch, Philipp; Kiesel, Raphael; Schmitt, Robert
Journal Article
2018Klein, kleiner, Nano. Optische Oberflächenmessverfahren zur Charakterisierung von Mikro- und Nanostrukturen
König, Niels; Schmitt, Robert H.
Journal Article
2018Laser-based and CAx-assisted system solution for the automated mold repair - ToolRep
Winands, Kai
Poster
2018Leitfaden für den industriellen Werkzeugbau
Prümmer, Marcel
Journal Article
2018Limits to simplified calculation of uncut chip thickness in milling
Smyczek, G.; Rotshteyn, G.; Degen, F.; Bergs, T.
Journal Article, Conference Paper
2018Material Removal Simulation for Abrasive Water Jet Milling
Klocke, F.; Schreiner, T.; Schüler, M.; Zeis, M.
Journal Article, Conference Paper
2018Measurement and analysis of thermo-elastic deviation of five-axis machine tool using dynamic R-test
Brecher, C.; Behrens, J.; Klatte, M.; Lee, T.H.; Tzanetos, F.
Journal Article, Conference Paper
2018Metrological analysis of a mechatronic system based on novel deformation sensors for thermal issues in machine tools
Brecher, C.; Klatte, M.; Lee, T.H.; Tzanetos, F.
Journal Article, Conference Paper
2018Mobile Roboter zur freien Verkettung von Montagestationen. Wie lassen sich mobile Roboter entwickeln und einsetzen, um ein flexibles Transportsystem zu realisieren?
Göppert, Amon; Grunert, Dennis; Pöhler, Stefan; Hüttemann, Guido; Schmitt, Robert
Journal Article
2018Model-predictive control for the automated production of thermoplastic composite pressure vessels
Schäkel, Martin; Janssen, Henning; Brecher, Christian
Conference Paper
2018Modeling and Simulation of the Microstructure Evolution of 42CrMo4 Steel during Electrochemical Machining
Klocke, F.; Harst, S.; Zeis, M.; Klink, A.
Journal Article, Conference Paper
2018Non-contact inspection of complex optical components
Depiereux, Frank; Rämer, Kurt
Journal Article
2018Normgerecht im Flugzeugbau. Systematisch zur Zertifizierung nach EN 9100
Vollmer, Thomas; Niedermeyer, Angela; Schmitt, Robert; Bünck, Matthias
Journal Article
2018A Novel Modeling Approach for the Simulation of Precise Electrochemical Machining (PECM) with Pulsed Current and Oscillating Cathode
Klocke, F.; Heidemanns, L.; Zeis, M.; Klink, A.
Journal Article, Conference Paper
2018Numerical-experimental investigation of load paths in DP800 dual phase steel during Nakajima test
Bergs, Thomas; Nick, Matthias; Feuerhack, Andreas; Trauth, Daniel; Klocke, Fritz
Conference Paper
2018Ohne Turbulenzen ins Audit. In sechs Schritten zum zertifizierten Zulieferer nach EN 9100
Vollmer, Thomas; Schmitt, Robert H.; Bünck, Matthias
Journal Article
2018One for all and all for one
Winands, Kai
Journal Article
2018Online-Korrektur für thermisch-bedingte Fehler bei Werkzeugmaschinen
Tzanetos, Filippos; Lowis, Steffen
Journal Article
2018Optical Coherence Tomography. Towards New Medical Applications
König, Niels; Riediger, Max; Wilhelm, Dirk; Witte, Michael; Masamune, Ken; Schmitt, Robert
Conference Paper
2018Optische Kohärenz Tomographie (OCT) zur intraoperativen Untersuchung von Gewebeproben
Beck, Rafael; Riediger, M.; Dietz, A.; Pallasch, D.; König, N.; Witte, M.; Schmitt, R.; Chalopin, C.
Abstract
2018Optische Kohärenztomographie
König, Niels
Book Article
2018Optische Kohärenztomographie zur kombinierten Form- und Zentrierprüfung kleinaperturiger optischer Komponenten
Riediger, Max; Schmitt, Robert
Abstract
2018Overlap ratio in wire- and powder-based laser metal deposition of H11 + Nb for hot forging dies
Teli, M.; Klocke, F.; Arntz, K.; Winands, K.; Klingbeil, N.; Arrizubieta, J.I.
Conference Paper
2018A practical approach for the optimization of channel integrity in the sealing of shallow microfluidic devices made from cyclic olefin polymer
Ganser, Philipp; Baum, Christoph; Chargin, David; Sauer-Budge, Alexis F.; Sharon, Andre
Journal Article
2018Präzise Fertigung von Großbauteilen
Ohlenforst, Markus; Wennemer, Matthias; Behrens, Jan; Peterek, Martin
Book Article
2018Precise phase demodulation of single carrier-frequency interferogram by pixel-level Lissajous figure and ellipse fitting
Liu, Fengwei; Wu, Yongqian; Wu, Fan; König, Niels; Schmitt, Robert; Wan, Yongjian; Xu, Yan
Journal Article
2018Precision glass molding of fused silica optics
Friedrichs, Marcel; Dambon, Olaf; Pongs, Guido; Zhang, Lin; Yi, Allen Y.; Klocke, Fritz
Conference Paper
2018Process control in ductile mode machining of tungsten carbide
Doetz, M.; Dambon, O.; Klocke, F.; Faehnle, O.; Langenbach, E.
Conference Paper
2018Process optimization of wire based laser metal deposition of titanium
Schulz, M.; Klocke, F.; Riepe, J.; Klingbeil, N.; Arntz, K.
Conference Paper
2018Process window analysis of ductile mode machining of binderless tungsten carbide molds
Doetz, M.; Lee, J.E.; Dambon, O.; Klocke, F.; Langenbach, E.; Faehnle, O.
Conference Paper
2018Produktionsstätte - kommunikativ und smart
Zhou, Beiyan; Schmitt, Robert
Journal Article
2018Prozesskraftmessung mit spindelintegrierter Sensorik
Brecher, C.; Eckel, H.-M.; Fey, M.; Butz, F.
Journal Article
2018Quantitative Beschreibung der Schleifscheibentopographie
Barth, S.; Röttger, J.; Trauth, D.; Mattfeld, P.; Bergs, T.; Klocke, F.
Journal Article
2018Reconfigurable Robotic Solution for Effective Finishing of Complex Surfaces
Hähnel, S.; Pini, F.; Leali, F.; Dambon, O.; Bergs, T.; Bletek, T.
Conference Paper
2018Reifegradmanagement zur Messung der Produktqualität in der Entwicklung
Klauke, Alexandra; Fleischer, Karsten; Schmitt, Robert; Vollmer, Thomas; Permin, Eike
Journal Article
2018Requirements gathering and validation for risk-oriented tool support in supply chains
Printz, Stephan; Ponsard, Christophe; Cube, Johann Philipp von; Landtsheer, Renaud de; Ospina, Gustavo; Massonet, Philippe; Schmitt, Robert; Jeschke, Sabina
Conference Paper
2018Resource Evaluation of Interlinked Manufacturing Systems in Tooling
Prümmer, Marcel; Bergs, Thomas; Lürken, Christian
Conference Paper
2018Ressourceneffizienz-Wertstrom
Vollmer, Thomas; Kerkhoff, Johannes; Große Böckmann, Markus; Permin, Eike
: Schmitt, Robert (Ed.)
Book
2018Scalability of the precision glass molding process for an efficient optics production
Liu, G.; Staasmeyer, J.-H.; Grunwald, T.; Dambon, O.
Conference Paper
2018Service-oriented communication and control system architecture for dynamically interconnected assembly systems
Jung, Sven; Grunert, Dennis; Schmitt, Robert H.
Conference Paper
2018Smart Devices. Vermittler zwischen Mensch, Maschine und Software
Lindner, Florian; Kostyszyn, Kevin Nikolai; Grunert, Dennis; Lossie, Karl; Schmitt, Robert
Journal Article
2018SPDT and standard CNC-grinding of tungsten carbide molds for precision glass molding
Vogt, C.; Faehnle, O.; Doetz, M.
Conference Paper
2018Das Stammzelllabor der Zukunft. Forschen in einer automatisierten Testumgebung
Ochs, Jelena; Jung, Sven; Piotrowski, Tobias; Niessing, Bastian; König, Niels; Schmitt, Robert
Electronic Publication
2018Start of EU project: Weld-seam characterisation in adaptive lase melting deposition
Riedel, Christoph
Journal Article
2018Study for Combined Wire + Powder Laser Metal Deposition of H11 and Niobium
Teli, Mahesh; Klocke, Fritz; Arntz, Kristian; Winands, Kai; Schulz, Martin; Oliari, Stella
Journal Article, Conference Paper
2018Surface adaptive fast axis ultra precision turning
Brozio, Matthias; Sensen, Dominik; Wenzel, Christian; Freutel, Simon; Brecher, Christian
Conference Paper
2018Surface integrity in ultra-precision grinding of transparent ceramics
Klocke, Fritz; Dambon, Olaf; Bletek, Thomas; Höche, Thomas; Naumann, Falk; Hutzler, Thomas
Journal Article, Conference Paper
2018Target-oriented analysis of resource consumption in manufacturing process chains
Demmer, Axel; Klingbeil, Nils; Klocke, Fritz; Putz, Matthias; Schmitt, Robert; Vollmer, Thomas
Journal Article, Conference Paper
2018Technology-based assessment of subtractive machining processes for mold manufacture
Klink, Andreas; Arntz, Kristian; Johannsen, Lars; Holsten, Maximilian; Chrubasik, Lothar; Winands, Kai; Wollbrink, Moritz; Bletek, Thomas; Gerretz, Vincent; Bergs, Thomas
Journal Article, Conference Paper
2018Thermally induced volumetric error compensation by means of integral deformation sensors
Baum, Christoph; Brecher, Christian; Klatte, Michel; Lee, Tae Hun; Tzanetos, Filippos
Journal Article, Conference Paper
2018Three wagons method applied: Optimization of level of surface roughness within ductile mode grinding of tungsten carbide molds
Doetz, M.; Faehnle, O.; Klocke, F.; Dambon, O.; Langenbach, E.
Conference Paper
2018Three wagons method to analyze ductile mode grinding processes
Faehnle, O.; Doetz, M.; Dambon, O.; Langenbach, E.
Conference Paper
2018Time-specific innovation transfer from corporate incubators - Derivation of design options based on the phases of initiation and execution
Schuh, Günther; Vogt, Florian; Wetterney, Tim
Conference Paper
2018Transient thermal analysis of laser-assisted thermoplastic tape placement at high process speeds by use of analytical solutions
Weiler, T.; Emonts, M.; Wollenburg, L.; Janssen, H.
Journal Article
2018Vacuum-assisted precision molding of 3D thin microstructure glass optics
Vu, A.T.; Vogel, P.-A.; Dambon, O.; Klocke, F.
Conference Paper
2018Verfahren und Vorrichtung für das Recycling von thermoplastischem Faserverbundmaterial
Janssen, Henning
Patent
2018Verfahren und Vorrichtung zur Bearbeitung eines Werkstückes
Schüler, Manuel
Patent
2018Wettbewerb Excellence in Production zum Werkzeugbau des Jahres 2018
Boos, Wolfgang; Salmen, Michael; Kelzenberg, Christoph; Helbig, Jens; Prümmer, Marcel; Ebbecke, Christoph; Horstkotte, Rainer
Journal Article
2018Wire- and powder-based laser metal deposition of H11 wire and niobium powder for hot forging application
Teli, Mahesh
Poster
2018Wire-based laser metal deposition (LMD-W) for additive manufacturing influences of the wire feed
Klingbeil, Nils
Poster
2018Wire-based Laser Metal Deposition (LMD-W) of Titanium Grade 5
Schulz, Martin
Poster
2018Wirkweise des Poliermittelträgers beim Polieren optischer Gläser
Wächter, Daniel
Dissertation