Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2018Analysis of form deviation in non-isothermal glass molding
Kreilkamp, Holger; Grunwald, Tim; Dambon, Olaf; Klocke, Fritz
Conference Paper
2018Automated assembly of lens barrels with active wavefront sensor guiding
Berger, Marvin; Müller, Tobias; Meiers, Bernd; Sauer, Sebastian; Krappig, Reik; Baum, Christoph; Brecher, Christian
Conference Paper
2018Automated assembly of microfluidic "lab-on-a-disc"
Berger, Marvin; Müller, Tobias; Voebel, Toni; Baum, Christoph; Glennon, T.; Mishra, R.; Kinahan, D.; King, D.; Ducrée, J.; Brecher, Christian
Conference Paper
2018Automated polarization control for the precise alignment of laser-induced self-organized nanostructures
Hermens, Ulrike; Pothen, Mario; Winands, Kai; Arntz, Kristian; Klocke, Fritz
Journal Article
2018Automated shaping of laser-induced nanoripples on freeform surfaces
Hermens, Ulrike
Poster
2018A Bayesian approach to process model evaluation in short run SPC
Permin, Eike; Voigtmann, Christoph; Schmitt, Robert H.
Journal Article
2018Bias voltage optimum adjustment considering coatings' strength and adhesion requirements when cutting various steels
Skordaris, G.; Bouzakis, K.-D.; Kotsanis, T.; Charalampous, P.; Bouzakis, E.; Bejjani, R.
Journal Article
2018The connected worker
Plutz, Martin
Journal Article
2018Continuous-flow, microfluidic, qRT-PCR system for RNA virus detection
Fernández-Carballo, B. Leticia; McBeth, Christine; McGuiness, Ian; Kalashnikov, Maxim; Baum, Christoph; Borrós, Salvador; Sharon, Andre; Sauer-Budge, Alexis F.
Journal Article
2018Cutting force model for gear honing
Bergs, T.
Journal Article
2018Definition of smart retrofitting: First steps for a company to deploy aspects of industry 4.0
Guerreiro, Bruno V.; Lins, Romulo G.; Sun, Jianing; Schmitt, Robert
Conference Paper
2018Design and function for freeform surfaces. How to texture 3D parts with micro- and nanostructures automated and distortion-free
Mescheder, Holger; Hermens, Ulrike
Journal Article
2018Design framework for model-based self-optimizing manufacturing systems
Thombansen, Ulrich; Buchholz, Guido; Frank, Daniel; Heinisch, Julian; Kemper, Maximilian; Pullen, Thomas; Reimer, Viktor; Rotshteyn, Grigory; Schwenzer, Max; Stemmler, Sebastian; Abel, Dirk; Gries, Thomas; Hopmann, Christian; Klocke, Fritz; Poprawe, Reinhardt; Reisgen, Uwe; Schmitt, Robert
Journal Article
2018Echtzeit-Maschinendaten auf mobile Endgeräte bringen: Smart visualisiert
Lindner, Florian; Permin, Eike; Schmitt, Robert; Gesthuysen, Frederik
Journal Article
2018Effect of niobium on microstructure-property relationship in H11 hot-work tool steel via wire- and powder-based laser metal deposition
Teli, M.; Klocke, F.; Arntz, K.; Winands, K.
Journal Article
2018Experimental investigation of contact heat transfer coefficients in nonisothermal glass molding by infrared thermography
Vu, A.T.; Vu, A.N.; Liu, G.; Grunwald, T.; Dambon, O.; Klocke, F.; Bergs, T.
Journal Article
2018The external scent efferent system of selected European true bugs (Heteroptera): A biomimetic inspiration for passive, unidirectional fluid transport
Hischen, Florian; Buchberger, Gerda; Plamadeala, Cristina; Armbruster, Oskar; Heiss, Ernst; Winands, Kai; Schwarz, Martin; Jüttler, Bert; Heitz, Johannes; Baumgartner, Werner
Journal Article
2018Frei verkettete Montagesysteme - Ein Ausblick
Göppert, Amon; Hüttemann, Guido; Jung, Sven; Grunert, Dennis; Schmitt, Robert H.
Journal Article
2018Freiformflächen mit dem Laser gezielt strukturieren
Mescheder, Holger; Hermens, Ulrike
Journal Article
2018Functional reliability of cognitive control systems for manufacturing processes
Permin, Eike; Lossie, Karl; Schmitt, Robert H.
Journal Article
2018Hellsehen in vier Schritten. Data Analytics für das digitale Qualitätsmanagement
Elser, Hannes; Heutmann, Timo; Lindemann, Marie; Schmitt, Robert
Journal Article
2018Highly modular and generic control software for adaptive cell processing on automated production platforms
Jung, Sven; Ochs, Jelena; Kulik, Michael; König, Niels; Schmitt, Robert H.
Journal Article, Conference Paper
2018Instrument zur Steigerung des branchenübergreifenden Verwertungspotenzials von Fertigungstechnologien
Graw, Myron
Dissertation
2018Klein, kleiner, Nano. Optische Oberflächenmessverfahren zur Charakterisierung von Mikro- und Nanostrukturen
König, Niels; Schmitt, Robert H.
Journal Article
2018Laser-based and CAx-assisted system solution for the automated mold repair - ToolRep
Winands, Kai
Poster
2018Non-contact inspection of complex optical components
Depiereux, Frank; Rämer, Kurt
Journal Article
2018Numerical-experimental investigation of load paths in DP800 dual phase steel during Nakajima test
Bergs, Thomas; Nick, Matthias; Feuerhack, Andreas; Trauth, Daniel; Klocke, Fritz
Conference Paper
2018Ohne Turbulenzen ins Audit. In sechs Schritten zum zertifizierten Zulieferer nach EN 9100
Vollmer, Thomas; Schmitt, Robert H.; Bünck, Matthias
Journal Article
2018One for all and all for one
Winands, Kai
Journal Article
2018A practical approach for the optimization of channel integrity in the sealing of shallow microfluidic devices made from cyclic olefin polymer
Ganser, Philipp; Baum, Christoph; Chargin, David; Sauer-Budge, Alexis F.; Sharon, Andre
Journal Article
2018Precise phase demodulation of single carrier-frequency interferogram by pixel-level Lissajous figure and ellipse fitting
Liu, Fengwei; Wu, Yongqian; Wu, Fan; König, Niels; Schmitt, Robert; Wan, Yongjian; Xu, Yan
Journal Article
2018Precision glass molding of fused silica optics
Friedrichs, Marcel; Dambon, Olaf; Pongs, Guido; Zhang, Lin; Yi, Allen Y.; Klocke, Fritz
Conference Paper
2018Requirements gathering and validation for risk-oriented tool support in supply chains
Printz, Stephan; Ponsard, Christophe; Cube, Johann Philipp von; Landtsheer, Renaud de; Ospina, Gustavo; Massonet, Philippe; Schmitt, Robert; Jeschke, Sabina
Conference Paper
2018Ressourceneffizienz-Wertstrom
Vollmer, Thomas; Kerkhoff, Johannes; Große Böckmann, Markus; Permin, Eike
: Schmitt, Robert (Ed.)
Book
2018Service-oriented communication and control system architecture for dynamically interconnected assembly systems
Jung, Sven; Grunert, Dennis; Schmitt, Robert H.
Conference Paper
2018Smart Devices. Vermittler zwischen Mensch, Maschine und Software
Lindner, Florian; Kostyszyn, Kevin Nikolai; Grunert, Dennis; Lossie, Karl; Schmitt, Robert
Journal Article
2018Das Stammzelllabor der Zukunft. Forschen in einer automatisierten Testumgebung
Ochs, Jelena; Jung, Sven; Piotrowski, Tobias; Niessing, Bastian; König, Niels; Schmitt, Robert
Electronic Publication
2018Start of EU project: Weld-seam characterisation in adaptive lase melting deposition
Riedel, Christoph
Journal Article
2018Surface adaptive fast axis ultra precision turning
Brozio, Matthias; Sensen, Dominik; Wenzel, Christian; Freutel, Simon; Brecher, Christian
Conference Paper
2018Surface integrity in ultra-precision grinding of transparent ceramics
Klocke, Fritz; Dambon, Olaf; Bletek, Thomas; Höche, Thomas; Naumann, Falk; Hutzler, Thomas
Journal Article, Conference Paper
2018Target-oriented analysis of resource consumption in manufacturing process chains
Demmer, Axel; Klingbeil, Nils; Klocke, Fritz; Putz, Matthias; Schmitt, Robert; Vollmer, Thomas
Journal Article, Conference Paper
2018Wettbewerb Excellence in Production zum Werkzeugbau des Jahres 2018
Boos, Wolfgang; Salmen, Michael; Kelzenberg, Christoph; Helbig, Jens; Prümmer, Marcel; Ebbecke, Christoph; Horstkotte, Rainer
Journal Article
2018Wire- and powder-based laser metal deposition of H11 wire and niobium powder for hot forging application
Teli, Mahesh
Poster
2018Wire-based laser metal deposition (LMD-W) for additive manufacturing influences of the wire feed
Klingbeil, Nils
Poster
2018Wire-based Laser Metal Deposition (LMD-W) of Titanium Grade 5
Schulz, Martin
Poster
2018Wirkweise des Poliermittelträgers beim Polieren optischer Gläser
Wächter, Daniel
Dissertation
20173D bioprinting of GelMA scaffolds triggers mineral deposition by primary human osteoblasts
McBeth, C.; Lauer, J.; Ottersbach, M.; Campbell, J.; Sharon, A.; Sauer-Budge, A.F.
Journal Article
20173D printing meets FRP: More flexibility for highly-stressed components
Janssen, Henning
Journal Article
201770:20:10-Regel sichert Innovation
Drescher, Toni; Zeller, Paul
Journal Article
2017Active alignment of DOE based structured light application in consumer electronics
Zontar, D.; Müller, T.; Sauer, S.; Hettler, N.; Brecher, C.
Conference Paper
2017Adaptive, connected production of hybrid thermoplastic prototypes
Schulz, M.; Janssen, H.; Brecher, C.
Journal Article
2017Additive Fertigung "Vom Pulver zum Fertigteil"
Alkhayat, Moritz; Arntz, Kristian; Klingbeil, Nils; Vollmer, Thomas
Book Article
2017Additive manufacturing of H11 with wire-based laser metal deposition
Holzbach Oliari, Stella; Climaco Monteiro D'Oliveira, Ana Sofia; Schulz, Martin
Journal Article
2017Advances in automation for the production of clinical-grade mesenchymal stromal cells: The AUTOSTEM robotic platform
Ochs, Jelena; Barry, Frank; Schmitt, Robert; Murphy, J. Mary
Journal Article
2017Agile datenbasierte Prozessgestaltung
Schmitt, Robert; Bihler, S.; Bork, H.; Große Böckmann, Markus; Gaukstern, T.; Krauß, Jonathan; Niendorf, Laura; Permin, Eike; Reusch, P.
Conference Paper
2017Agile Produktentwicklung
Schuh, Günther; Diels, F.; Ortlieb, C.; Riesener, M.; Schröder, Stephan
Conference Paper
2017Aktive Gestaltung globaler Produktionsnetzwerke
Friedli, T.; Lanza, G.; Schuh, G.; Treber, S.; Wiech, M.; Gützlaff, A.
Journal Article
2017Analyse von Fräswerkzeugen zur Steigerung der Prozessstabilität bei der Herstellung von Turbinenschaufeln
Schäfer, Alexander; Steinfeldt, Steffen
Journal Article
2017Analysis of critical process parameters of ductile mode grinding of brittle materials
Faehnle, Oliver; Doetz, Marius; Dambon, Olaf
Journal Article
2017Analysis of dimple textured surfaces on cutting tools
Stoeterau, R.L.; Janssen, A.; Mallmann, G.
Journal Article
2017Analysis of spatial and temporal dependencies of the TCP-dislocation measurement for the assessment of the thermo-elastic behavior of 3-axis machine tools
Brecher, Christian; Klatte, Michel; Tzanetos, Filippos
Conference Paper
2017Analysis of the application of poly-nanocrystalline diamond tools for ultra precision machining of steel with ultrasonic assistance
Doetz, Marius; Dambon, Olaf; Klocke, Fritz; Bulla, Benjamin; Schottka, Karl; Robertson, David J.
Conference Paper
2017Application of an unscented Kalman filter for modeling multiple types of machine tool errors
Brecher, C.; Brozio, M.; Klatte, M.; Lee, T.H.; Tzanetos, F.
Journal Article, Conference Paper
2017Assessing the value of data. An approach to evaluate the technology driven benefits of smart product data
Schuh, Günther; Kreutzer, Ramon; Patzwald, Marc
Conference Paper
2017Assessment of risks in manufacturing using discrete-event simulation
Landtsheer, R. de; Ospina, G.; Massonet, P.; Ponsard, C.; Printz, S.; Jeschke, S.; Härtel, L.; Cube, J.P. von; Schmitt, R.
Conference Paper
2017Assistenzsysteme in der Produktionstechnik
Klocke, Fritz; Bassett, E.; Bönsch, C.; Gärtner, R.; Holsten, S.; Jamal, R.; Jurke, B.; Kamps, S.; Kerzel, U.; Mattfeld, P.; Shirobokov, A.; Stauder, J.; Stautner, M.; Trauth, D.
Conference Paper
2017Atomic diffusion induced degradation in bimetallic layer coated cemented tungsten carbide
Peng, Zirong; Rohwerder, Michael; Choi, Pyuck-Pa; Gault, Baptiste; Meiners, Thorsten; Friedrichs, Marcel; Kreilkamp, Holger; Klocke, Fritz; Raabe, Dierk
Journal Article
2017Les atouts de l'OCT pour le soudage laser
Ackermann, Philippe
Journal Article
2017Automated tissue dissociation for rapid extraction of viable cells
McBeth, Christine; Gutermuth, Angela; Ochs, Jelena; Sharon, Andre; Sauer-Budge, Alexis F.
Journal Article, Conference Paper
2017Automatisierte Montage von Dehnungsmessstreifen auf nicht ebenen 3D-Flächen
Sauer, Sebastian; Kumar, Arun; Brozio, Matthias; Schiek, Christian; Yavuz, Hilmi
Conference Paper
2017Automatisierung in der Arbeitsplanung. Ergebnisse einer Studie
Schuh, G.; Prote, J.-P.; Luckert, M.; Hünnekes, P.
Journal Article
2017The AUTOSTEM platform for closed manufacture of bone marrow-derived mesenchymal stromal cells using a closed, scalable and automated robotic system
Murphy, M.; Barry, F.; Leschke, C.; Vaughan, B.; Gentili, C.; O'Dea, J.; Ogourtsov, V.; Rafiq, Q.A.; Ochs, J.; Kulik, M.; Koenig, N.
Abstract
2017Baseline haemodynamic and optical properties of the newborn brain and the reproducibility of the measurements: a preliminary report from the BabyLux project
Giovannella, M.; Andresen, B.; Carli, A. de; Chamizo, V.; Pagliazzi, M.; Rehberger, M.; Contini, D.; Pifferi, A.; Spinelli, L.; Donat, R.; Erdmann, R.; Fumagalli, M.; Greisen, G.; Weigel, UM.; Durduran, T.; Torricelli, A.
Abstract
2017Berührungslose Prüfung komplexer Optik-Komponenten
Depiereux, Frank; Rämer, Kurt
Journal Article
2017Bewertung von Multitechnologieplattformen
Rey, Jan; Bois-Reymond, Frédéric du; Schmid, Alexander; Trauth, Daniel; Mattfeld, Patrick; Klocke, Fritz; Brecher, Christian
Journal Article
2017Birefringence measurement for validation of simulation of precision glass molding process
Pallicity, T.D.; Vu, A.-T.; Ramesh, K.; Mahajan, P.; Liu, G.; Dambon, O.
Journal Article
2017Calibration of five-axis machine tool using R-test procedure
Brecher, C.; Behrens, J.; Lee, T.H.; Charlier, S.
Conference Paper
2017Capabilities and challenges in transferring the wavefront-based alignment approach to small aperture multi-element optical systems
Krappig, Reik; Schmitt, Robert
Conference Paper
2017CAx-Prozesskette für komplexe Rotationsbauteile
Königs, Michael; Huwer, Tobias; Dax, Paul
Journal Article
2017Chalcogenide glass molding advances precision IR optics
Friedrichs, Marcel; Kreilkamp, Holger
Journal Article
2017Clarification of gap phenomena in precise electrochemical machining by implementing a "virtual sensor"
Klocke, Fritz; Heidemanns, Lukas; Zeis, Markus; Kling, Andreas
Conference Paper
2017Cognition-enhanced, self-optimizing assembly systems
Schmitt, R.; Corves, B.; Loosen, P.; Brecher, C.; Jeschke, S.; Kimmelmann, W.; Hüsing, M.; Stollenwerk, J.; Bertelsmeier, F.; Detert, T.; Haag, S.; Hoffmann, M.; Holters, M.; Kurtenbach, S.; Permin, E.; Prochnau, M.; Storm, C.K.; Janßen, M.
Book Article
2017Compensation of scanner based inertia for laser structuring processes
Pothen, Mario; Winands, Kai; Klocke, Fritz
Journal Article
2017Concept of innovation transfer from corporate incubators
Schuh, Günther; Vogt, Florian; Lau, Felix; Bickendorf, Philipp
Conference Paper
2017Configuration options for corporate incubators - development of a description model using the morphological analysis method
Schuh, Günther; Lau, Felix; Zimmermann, Richard; Vogt, Florian
Conference Paper
2017Continuous assessment of geometrical properties from unidirectional fiber reinforced tapes
Buschhoff, Clemens; Schäkel, Martin; Janssen, Henning; Brecher, Christian
Conference Paper
2017Data collection and utilization during the adaptive production of thermoplastic composite pressure vessels
Peters, Tido; Schäkel, Martin; Janssen, Henning; Brecher, Christian
Presentation
2017Degradation Mechanism of Molds for Precision Glass Molding
Peng, Zirong; Rohwerder, Michael; Friedrichs, Marcel; Choi, Pyuck-Pa; Gault, Baptiste; Meiners, Thorsten; Kreilkamp, Holger; Klocke, Fritz; Raabe, Dierk
Journal Article, Conference Paper
2017Description model for goals of corporate incubators
Schuh, Günther; Lau, Felix; Herding, Jannik
Conference Paper
2017Design framework of an ecosystem for network-based innovation. Conceptual research methodology
Schuh, Günther; Wölk, Sebastian
Conference Paper
2017Design of a modular framework for the integration of machines and devices into service-oriented production networks
Jung, Sven; Kulik, Michael; König, Niels; Schmitt, Robert
Conference Paper
2017Determination of information demand for efficient technology monitoring
Schuh, Günther; König, Christina
Conference Paper
2017Digitale Schatten machen Fliegen sicherer
Gierlings, Sascha
Journal Article
2017Disruptive technology scanning. Passive screening versus hands-on experimenting
Schuh, Günther; Kabasci, Patrick
Conference Paper
2017Efficient production of tailored structural thermoplastic composite parts by combining tape placement and 3d printing
Janssen, Henning; Peters, Tido; Brecher, Christian
Journal Article, Conference Paper
2017Energieeffiziente Produktionsstätte durch bedarfsabhängige und innovative Gebäudeautomation. Reduzierung von Energiekosten durch Vernetzung von Gebäudeautomation, PPS-Systemen und Wetter-Forecasts
Schmitt, Robert; Zhou, Beiyan; Vollmer, Thomas
Journal Article
2017Energieflexible Produktionsplanung und -steuerung
Schuh, G.; Prote, J.-P.; Luckert, M.; Sauermann, F.; Thomas, K.
Journal Article
2017Energieorientierte Produktionsplanung und -steuerung
Heutmann, Timo; Schmitt, Robert
Journal Article
2017Energiesparen lohnt sich immer mehr. Wie Energiemanagement und MES kostensparend zusammenwirken
Heutmann, Timo
Journal Article
2017Energy efficiency through a load-adaptive building automation in production
Zhou, Beiyan; Vollmer, Thomas; Schmitt, Robert
Conference Paper
2017Engineering valley - Internet of production auf dem RWTH Aachen Campus
: Schuh, Günther; Brecher, Christian; Klocke, Fritz; Schmitt, Robert
Book
2017Enhancement of personnel competence in industry 4.0 production environment by using Smart Devices
Sun, Jianing; Permin, Eike; Schmitt, Robert
Conference Paper
2017Enhancing resiliency in production facilities through cyber physical systems
Schmitt, Robert; Permin, Eike; Kerkhoff, Johannes; Plutz, Martin; Große Böckmann, Markus
Book Article
2017Entwicklung der Produktions-IT - Potenziale, Herausforderungen und Anwendungsfälle
Vollmer, Thomas; Zhou, Beiyan; Heutmann, Timo; Kiesel, Raphael; Schmitt, Robert
Journal Article
2017Erfolgreich Automatisieren im Werkzeugbau
Boos, Wolfgang; Arntz, Kristian; Johannsen, Lars; Prümmer, Marcel; Wollbrink, Moritz; Wilms, Marcel; Horstkotte, Rainer
Study
2017Erfolgreich Fertigungstechnologien Einsetzen im Werkzeugbau
Boos, Wolfgang; Arntz, Kristian; Johannsen, Lars; Dröscher, Tim; Wollbrink, Moritz; Prümmer, Marcel
Study
2017Erfolgsfaktoren im Technologiemanagement. Fraunhofer IPT kürt Unternehmen mit exzellentem Technologiemanagement
Schuh, Günther; Wellensiek, Markus; König, Christina; Zeller, Paul
Journal Article
2017Evaluation of efficiency and mechanical properties of Inconel 718 components built by wire and powder laser material deposition
Arrizubieta, J.I.; Klocke, Fritz; Klingbeil, Nils; Arntz, Kristian; Lamikiz, A.; Martinez, S.
Journal Article
2017Evaluation of the relevance of melt pool dynamics in Laser Material Deposition process modeling
Arrizubieta, Jon Iñaki; Lamikiz, Aitzol; Klocke, Fritz; Martínez, Silvia; Arntz, Kristian; Ukar, Eneko
Journal Article
2017Evaluation of the shear stresses on surface structured workpieces in dry forming using a novel pin-on-cylinder tribometer with axial feed
Trauth, D.; Bastürk, S.; Hild, R.; Mattfeld, P.; Brögelmann, T.; Bobzin, K.; Klocke, F.
Journal Article
2017Fertigungsverfahren für das Tissue Engineering. Mit Mikro- und Nano-Strukturen zum humanen Gewebeersatz
Skazik-Voogt, C.; Bastuck, T.; Janssen, A.; Gutermuth, A.
Journal Article
2017First-class risk management from second-use data sources
Castaño Reyes, Carmen E.; Kiesel, Raphael; Schmitt, Robert
Conference Paper
2017Flexibilisierung von Maschinenbedienern mit mobilen Endgeräten - Smartes Informationssystem als Erweiterung der klassischen Maschinensteuerung
Lindner, Florian; Permin, Eike; Schmitt, Robert; Gesthuysen, Frederik
Journal Article
2017Fraunhofer-Institut für Produktionstechnologie. Jahresbericht 2016
 
Annual Report
2017Funktionsprinzip der messtechnisch basierten Korrektur thermischer Verlagerungen am Versuchsträger MAX
Riedel, Mirko; Müller, Jens; Klatte, Michel; Tzanetos, Filippos
Conference Paper
2017Ganzheitliche Gestaltung von Lean
Schuh, G.; Prote, J.-P.; Wolff, B.; Dany, S.; Walendzik, P.
Journal Article
2017Glass material modeling and its molding behavior
Liu, Gang; Vu, Anh Tuan; Dambon, Olaf; Klocke, Fritz
Journal Article
2017Gut sortiert zu neuer Größe. Statistische Absicherung in der Produktion von Einzelteilen und Kleinserien
Kostyszyn, Kevin; Back de Luca, Artur; Schmitt, Robert
Journal Article
2017Handlungsfelder zur erfolgreichen Umsetzung von Industrie 4.0 in der F & E
Schuh, G.; Riesener, M.; Barg, S.; Mattern, C.
Journal Article
2017High-resolution, high-speed inline optical topography measurement system for laser micro-machining process control
Folkersma, K.G.P.; Woldering, L.A.; Voss, K.H.J.; Pohl, R.; Resink, S.G.; Kunze, Rouwen; Schmitt, Robert; Klein, M.E.; Borreman, A.; de Hoon, C.J.A.
Conference Paper
2017A holistic approach for virtual commissioning of intelligent systems: Model-based systems engineering for the development of a turn-milling center
Henke, C.; Michael, J.; Lankeit, C.; Trächtler, A.
Conference Paper
2017Hybridisation - a toolbox for efficient lightweight production
Fischer, K.; Emonts, Michael
Journal Article
2017Individualized FAC on bottom tab subassemblies to minimize adhesive gap between emitter and optics
Sauer, S.; Müller, T.; Haag, S.; Beleke, A.; Zontar, D.; Baum, C.; Brecher, C.
Conference Paper
2017Induktiv beheizbares Formwerkzeug
Emonts, Michael; Werner, Daniel; Janssen, Henning; Steinmayer, Marc; Michelis, Benedict
Patent
2017Industrial energy efficiency potentials: An assessment of three different robot concepts
Kurilova-Palisaitiene, Jelena; Permin, Eike; Mannheim, Tom; Buhse, Kai; Lorenz, M.; Schmitt, Robert; Corves, Burkhard; Björkmann, Mats
Journal Article
2017Inline surface topography measurements of ultrashort laser pulsed manufactured micro structures based on low coherence interferometry
Kunze, Rouwen; Schmitt, Robert
Journal Article
2017Innovative suspensions for caterpillar vehicles
Poddubnyi, V.I.; Trechtler, A.; Warkentin, A.; Kruger, M.
Journal Article
2017Instantaneous powder flux regulation system for Laser Metal Deposition
Arrizubieta, J.I.; Martinez, S.; Lamikiz, A.; Ukar, E.; Arntz, K.; Klocke, F.
Journal Article
2017Integrating design and costing
Bleck, K.; Breiing, M.; Emonts, Michael; Fischer, K.
Journal Article
2017Integration of a smart measurement device in the laser structuring process chain to ensure high quality
Pothen, Mario; Henrichs, Oliver
Conference Paper
2017Integrative Werkstoff- und Prozesssimulation
Klocke, Fritz; Münstermann, S.; Schröder, K.-U.; Apel, M.; Binder, M.; Butz, A.; Döbbeler, B.; Fischersworring-Bunk, A.; Prahl, U.; Ruess, M.
Conference Paper
2017Intelligente Algorithmik für integrierte Sensorik: Prozessüberwachung im multisensorischen Werkzeughalter
Brecher, Christian; Brozio, Matthias; Baum, Christoph
Conference Paper
2017Internet of Production für agile Unternehmen. AWK Aachener Werkzeugmaschinen-Kolloquium 2017
: Brecher, Christian; Klocke, Fritz; Schmitt, Robert; Schuh, Günther
Conference Proceedings
2017Joining of thermoplastic tapes with metal alloys utilizing novel laser sources and enhanced process control in a tape placement process
Kukla, C.; Peters, T.; Janssen, H.; Brecher, C.
Journal Article, Conference Paper
2017Joining techniques
Buschhoff, Clemens; Emonts, Michael; Brecher, Christian
Book Article
2017Laser hardening of thin walled parts with cryogenic cooling
Klocke, Fritz; Gräfe, Stefan; Schulz, Martin; Zheng, Gaoyuan
Conference Paper
2017Laserstrahlhärten dünnwandiger Bauteile mit kryogener Kühlung
Zheng, Gaoyuan
Master Thesis
2017Laserunterstütztes Projizierstreckdrücken von Inconel 718
Brummer, Christoph
Dissertation
2017Leitfaden des Fraunhofer IPT erleichtert die GMP-gerechte Konstruktion
Kiesel, Raphael
Journal Article
2017Manufacturing of miniaturized thermoplastic FRP components using a novel reaction injection pultrusion process
Brack, Alexander; Janssen, Henning; Brecher, Christian
Conference Paper
2017Mesh-based CAM Solution for Laser Manufacturing and Repair Processes
Liu, Y.
Dissertation
2017Methode zur ähnlichkeitsbasierten SPC für Kleinserien
Kostyszyn, Kevin; Schmitt, Robert
Journal Article
2017Methodology to assess the utility potentials of cyber-physical systems ́ field data - a literature review and rough solution concept
Schuh, Günther; Kreutzer, Ramon
Journal Article
2017Mimicking bug-like surface structures and their fluid transport produced by ultrashort laser pulse irradiation of steel
Kirner, V. Sabrina; Hermens, Ulrike; Mimidis, Alexandros; Skoulas, Evangelos; Florian, Camilo; Hischen, Florian; Plamadeala, Christina; Baumgartner, Werner; Winands, Kai; Mescheder, Holger; Krüger, Jörg; Solis, Javier; Siegel, Jan; Stratakis, Emmanuel; Bonse, Jörn
Journal Article
2017Mimicking lizard-like surface structures upon ultrashort laser pulse irradiation of inorganic materials
Hermens, Ulrike; Kirner, Sabrina V.; Emonts, Caroline; Comanns, Philipp; Skoulas, Evangelos; Mimidis, A.; Mescheder, Holger; Winands, Kai; Krüger, Jörg; Stratakis, Emmanuel; Bonse, Jörn
Journal Article
2017Mit einem leistungsfähigen Netzwerk und Innovationspfad werden Ideen zu erfolgreichen Innovationen
Schuh, Günther; Wellensiek, Markus; König, Christina; Zeller, Paul; Diez, Michael; Wellenzohn, Günther
Journal Article
2017Mit Verfahrenskombination zur perfekten Mikrokontur
Janssen, Andreas
Journal Article
2017Modeling and simulation of the fluid flow in wire electrochemical machining with rotating tool (wire ECM)
Klocke, Fritz; Herrig, Tim; Zeis, Markus; Klink, Andreas
Conference Paper
2017Modeling of the electrochemical dissolution process for a two-phase material in a passivating electrolyte system
Klocke, F.; Harst, S.; Karges, F.; Zeis, M.; Klink, A.
Journal Article, Conference Paper
2017Modelling the constitutive behaviour of martensite and austenite in shape memory alloys using closed-form analytical continuous equations
Pai, A.; Niendorf, T.; Krooss, P.; Koke, I.; Traechtler, A.; Schaper, M.
Conference Paper
2017Monetary and quality-feature-based quantification of failure risks in existing process chains
Kostyszyn, Kevin Nikolai; Schmitt, Robert
Conference Paper
2017Monitoring of laser material processing using machine integrated low-coherence interferometry
König, Niels; Kunze, Rouwen; Schmitt, Robert
Conference Paper
2017Multi-technology platforms (MTPs)
Brecher, C.; Bleck, W.; Feldhusen, J.; Hirt, G.; Klocke, F.; Reisgen, U.; Schmitt, R.; Bailly, D.; Bambach, M.; Conrads, L.; Bois-Reymond, F. du; Göttmann, A.; Gräfe, S.; Harraz, M.; Heller, J.E.; Herfs, W.; Komerla, K.C.; Laugwitz, M.; Löwer, M.; Mertin, C.; Naumov, A.; Nittinger, J.; Peterek, M.; Prahl, U.; Rey, J.; Schiebahn, A.; Schmid, A.; Schmitz, R.; Tönissen, S.; Voswinckel, H.; Wegener, M.; Wellmann, F.
Book Article
2017Der multisensorische Werkzeughalter - Intelligente Sensorik mit innovativer Produktionstechnik
Brozio, Matthias; Sauer, Sebastian; Yavuz, Hilmi; Lütgens, Mirko; Salvasohn, Manuel; Berthold, David; Schiek, Christian
Conference Paper
2017Nachhaltige Sicherung der Innovationsführerschaft: Für, mit und bei den Kunden entwickeln
Schuh, Günther; Wellensiek, Markus; König, Christina; Zeller, Paul; Bohle, Klaus; Kitzer, Peter; Kolbe, Wolfram; Kaltenborn, Uwe
Journal Article
2017Neue mikrofluidische Systeme - von der Echse zum gezielten Fluidtransport
Hermens, Ulrike
Journal Article
2017New potential from composite technologies in buildings and infrastructure
Kalt, L.; Weiler, T.; Emonts, M.; Fischer, K.
Journal Article
2017A novel methodology for retrofitting CNC machines based on the context of industry 4.0
Lins, Romulo Gonc¸alves; Schmitt, Robert; Guerreiro, Bruno; Corazzim, Marcio; Silva, Francis R.; Sun, J.
Conference Paper
2017Oberflächenmesstechnik zur Charakterisierung von Mikro- und Nanostrukturen
König, Niels
Book Article
2017Online data collection and modeling for the adaptive production of composite pipes & vessels
Schäkel, Martin; Janssen, Henning; Brecher, Christian
Presentation
2017Optical measurement system for the machine integrated monitoring and automation of laser micro machining processes
Mallmann, Guilherme Francisco
Dissertation
2017Optimization of the laser hardening process by adapting the intensity distribution to generate a top-hat temperature distribution using freeform optics
Klocke, Fritz; Schulz, Martin; Gräfe, Stefan
Journal Article
2017Optische Kohärenztomographie
König, Niels
Book Article
2017OpToRoMill - Innovative Fertigungstechnologie für komplexe Rotationsbauteile zum Ersatz von Sonderwerkzeugen durch Standardwerkzeuge in der CAx-Prozesskette
Degen, Florian; Königs, Michael
Report
2017Organisation, Qualität und IT-Systeme für Planung und Betrieb
Niehues, Michael; Reinhart, Gunther; Schmitt, Robert H.; Schuh, Günther; Brambring, Felix; Ellerich, Max; Elser, Hannes; Frank, Daniel; Groggert, Sebastian; Gützlaff, Andreas; Heinrichs, Verena; Hempel, Thomas; Kostyszyn, Kevin; Ngo, Hao; Niendorf, Laura; Permin, Eike; Prote, Jan-Philipp; Reuter, Christina; Türtmann, Robin
Book Article
2017Organizational implementation of technology platforms in diversified companies
Schuh, Günther; Ryschka, Simon
Journal Article
2017Orthogonal cutting of cortical bone: Temperature elevation and fracture toughness
Feldmann, A.; Ganser, P.; Nolte, L.; Zysset, P.
Journal Article
2017Parallelization in automated stem cell culture
Kulik, Michael; Ochs, Jelena; König, Niels; McBeth, Christine; Sauer-Budge, Alexis; Sharon, Andre; Schmitt, Robert
Journal Article, Conference Paper
2017Potential Industrial Applications for Powder-Based and Wire-Based Laser Metal Deposition (LMD)
Zhong, Chongliang; Klingbeil, Nils
Book Article
2017Präskriptiv statt deskriptiv. Umstellung auf ISO 9001:2015 - von der Pflicht zur Chance
Kiesel, Raphael; Müller, Tobias; Schmitt, Robert
Journal Article
2017Prediction and compensation of machining-induced shape deviations in finish milling
Stolorz, Martin
Dissertation
2017Produktreifegradbestimmung in frühen Phasen der Produktentwicklung (Rapido)
Klauke, Alexandra; Cube, Philipp von; Hesse, Stephan; Schmitt, Robert; Fleischer, Carsten
Report
2017Prognosefähigkeit für Prozessketten
Klocke, Fritz; Arntz, Kristian; Dröscher, Tim; Gorgels, Christof; Heuer, Volker; Johann, Herbert; Kappmeyer, Gregor; Krömer, Markus; Löpenhaus, Christoph; Schug, Pascal; Welling, David
Conference Paper
2017Projekt 2: Leichbaukarosserie
Janssen, Henning; Buschhoff, Clemens
Book Article
2017Protective coatings for chalcogenide glass molding
Friedrichs, Marcel; Staasmeyer, Jan-Helge; Dambon, Olaf; Klocke, Fritz
Conference Paper
2017Prozess- und Maschinenentwicklung für das mehrschrittige Mikroheißprägen
Baum, Christoph
Dissertation
2017Qualitätsmerkmalbasierte Quantifizierung von Fehlerrisiken in Echtzeit
Kostyszyn, Kevin Nikolai; Ens, Elisabeth; Janik, Benjamin; Schmitt, Robert
Conference Paper
2017Quantification of micro-pullwinding process as basis of data mining algorithms for predictive process model
Wasiak, Christian; Nettleton, David; Janssen, Henning; Brecher, Christian
Conference Paper
2017Radikale Innovationen heißt radikal Umdenken
Drescher, Toni; Wetterney, Tim; Robertz, Bernd; Hachmöller, Antje
Book Article
2017Radikale Innovationen und neue Geschäftsmodelle
Schuh, Günther; Haller, C.; Kantelberg, J.; Lau, Felix; Linder, N.; Spangler, T.; Van Dijk, L.; Walch, M.
Conference Paper
2017Reif für den Kunden
Laufer, Klaus; Ludwig, Christian; Klauke, Alexandra; Cube, Johann Philipp von; Schmitt, Robert; Fleischer, Karsten
Journal Article
2017Reliability growth model for a diode laser-based tape winding machine
Reina, Alice; Merlo, Angelo; Schäkel, Martin; Aggogeri, Francesco
Presentation
2017Roboter forscht. Automatisierte Kultivierung von Stammzellen
Kulik, Michael; Jung, Sven; Schmitt, Robert
Journal Article
2017Robuste Produktionssysteme durch Sensorintegration
Brecher, Christian; Baum, Christoph; Billep, D.; Brozio, Matthias; Essig, B.; Klatte, Michel; Lee, Tae Hun; Mallmann, Guilherme; Reiser, W.; Salvasohn, M.; Probst, U.
Conference Paper
2017Rotationsachsen blitzschnell vermessen
Brecher, Christian; Behrens, Jan; Lee, Tae Hun; Langlotz, Enrico; Dontsov, Denis; Schott, Walter
Journal Article
2017Schnittstellen im Fokus
Brecher, Christian; Bergs, Christian; Fey, Marcel
Journal Article
2017Scientific cooperation engineering
Jeschke, Sabina; Bleck, Wolfgang; Richert, Anja; Schuh, Günther; Schulz, Wolfgang; Ziefle, Martina; Bräkling, André; Calero Valdez, André; Dahmen, Kirsten; Jansen, Ulrich; Jooß, Claudia; Müller, Sarah L.; Prahl, Ulrich; Schaar, Anne Kathrin; Sharma, Mamta; Thiele, Thomas
Book Article
2017Self-optimizing production technologies
Klocke, Fritz; Abel, Dirk; Gries, Thomas; Hopmann, Christian; Loosen, Peter; Poprawe, Reinhard; Reisgen, Uwe; Schmitt, Robert; Schulz, Wolfgang; Abels, Peter; Adams, Oliver; Auerbach, Thomas; Buchholz, Guido; Döbbeler, Benjamin; Frank, Daniel; Heinisch, Julian; Hermanns, Torsten; Gloy, Yves-Simon; Keitzel, Gunnar; Kemper, Maximilian; Martel, Diana Suarez; Reimer, Viktor; Reiter, Matthias; Saggiomo, Marco; Schwenzer, Max; Stemmler, Sebastian; Stoyanov, Stoyan; Thombansen, Ulrich; Veselovac, Drazen; Willms, Konrad
Book Article
2017Sensorischer Spindelstock zur Thermo-Korrektur
Brecher, Christian; Klatte, Michel
Journal Article
2017Signalverarbeitung zur Inline-Prozessüberwachung für koaxial integrierte Messtechnik in der Lasermikrostrukturierung
Kunze, Rouwen; Bredol, Philipp; Schmitt, Robert
Journal Article
2017SimQRi - Simualtive Quantifizierung der Risikofolgen und der internen Maßnahmewirkungen in komplexen Beschaffungsketten zur externen Risikobehandlung
Jeschke, Sabina; Vossen, René; Klocke, Fritz; Hubaux, Damien
Report
2017Smart Devices in der Fertigung. Neue Akteure in der industriellen Kommunikation
Lindner, Florian; Kostyszyn, Kevin Nikolai; Gruntert, Dennis; Schmitt, Robert
Journal Article
2017Smarte Informationssysteme für den Maschinenbediener
Lindner, Florian; Permin, Eike; Grunert, Dennis; Schmitt, Robert; Lantermann, Thomas
Journal Article
2017Softwarebasierte Bewertungsmethodik
Arntz, Kristian; Klingbeil, Nils; Vollmer, Thomas
Book Article
2017State-of-the-art laser additive manufacturing for hot-work tool steels
Klocke, Fritz; Arntz, Kristian; Teli, Mahesh; Winands, Kai; Wegener, Maximilian; Oliari, Stella
Journal Article
2017Study on friction and wear reducing surface micro-structures for a positive displacement pump handling highly abrasive shale oil
Janssen, Andreas; Pindeo, Bihotz; Igartua, Amaya; Liiskmann, Guido; Sexton, Leo
Journal Article
2017System improvement for laser-based tape placement to directly manufacture metal / thermoplastic composite parts
Peters, Tido; Kukla, Christian; Janssen, Henning; Brecher, Christian
Conference Paper
2017Systematisch zum fehlerfreien Produkt. Zertifizierung nach EN9100
Vollmer, Thomas; Schulte, Tobias; Schmitt, Robert; Bünck, Matthias
Journal Article
2017Das Technologiemanagement erfolgreich gestalten
Schuh, G.; Wellensiek, M.; König, C.; Zeller, P.
Journal Article
2017Technology platforms
Brecher, Christian; Schuh, Günther; Bräkling, André; Özdemir, Denis; Wassong, Anja; Weber, Anja
Book Article
2017Thermal analysis of a novel five-axis machine tool using measuring probe and R-test procedure
Brecher, Christian; Behrens, Jan; Klatte, Michel; Lee, Tae Hun; Tzanetos, Filippos
Conference Paper
2017Tomographical process monitoring of laser transmission welding with OCT
Ackermann, P.; Schmitt, R.
Conference Paper
2017Towards new success factors in technology intelligence evidence from a european benchmarking study
Schuh, Günther; Lau, Felix; Kabasci, Patrick; Bachmann, Heidi
Journal Article
2017Two-photon polymerization as a structuring technology in production: Future or fiction?
Harnisch, Emely Marie; Schmitt, Robert
Conference Paper
2017Typing of innovations from corporate incubator
Schuh, Günther; Vogt, Florian; Lau, Felix; Bickendorf, Philipp
Journal Article
2017Ultra-precision grinding of polycrystalline transparent ceramics
Bletek, Thomas; Dambon, Olaf; Klocke, Fritz
Conference Paper
2017Ultrapräzisionsschleifen von Formwerkzeugen für das Präzisionsblankpressen von optischen Gläsern
Dambon, Olaf; Bletek, Thomas
Journal Article
2017Ultrasonic tooling system design and development for single point diamond turning (SPDT) of ferrous metals
Gaidys, R.; Dambon, O.; Ostasevicius, V.; Dicke, C.; Narijauskaite, B.
Journal Article
2017Umdenken erforderlich. Robuste Synchronisierung in der Einzelteilfertigung
Heutmann, Timo; Fels, Antonia; Schmitt, Robert
Journal Article
2017Verbesserung der energiebezogenen Leistung der Produktionsprozesse keramischer Baumaterialien durch Benchmarking
Günther, Sebastian
Dissertation
2017Verfahren zur Herstellung eines 3D-CAD-Modells, Verwendung des 3D-CAD-Modells, Computerprogrammprodukt und System zur NC-Bearbeitung
Huwer, Tobias; Bobek, Thomas
Patent
2017Verformung dünnwandiger Graphitelektroden mit hohen Aspektverhältnissen beim funkenerosiven Senken
Zeis, Markus
Dissertation
2017Vernetzte, adaptive Produktion
Klocke, Fritz; Bergs, Thomas; Bobek, Thomas; Huwer, Tobias; Liu, Gang; Pothen, Mario; Staasmeyer, Jan-Helge; Winands, Kai
Conference Paper
2017Vernetzung von Produktionssystemen. Anwenderleitfaden zum automatisierten Monitoring von Ressourcenverbräuchen
Schmitt, Robert; Große Böckmann, Markus; Vollmer, Thomas; Mennicken, Verena
Report
2017Vertical integration of production systems for resource efficiency determination
Vollmer, Thomas; Rodemann, Niklas; Schmitt, Robert Heinrich
Conference Paper
2017Wavefront-based alignment: Properties and precision
Krappig, Reik; Schmitt, Robert
Journal Article
2017Wertvolle Seen in der Produktion. Mit Data Lakes Informationen bedarfsgerecht und einfach bereitstellen
Krauß, Jonathan; Heutmann, Timo; Quix, Christoph; Reuter, Dominic; Harmata, Simon; Schmitt, Robert
Journal Article
2017Whitepaper - Empirische Studie: Gestaltung von Corporate Inkubatoren
Schuh, Günther; Lau, Felix; Vogt, Florian; Zimmermann, Richard
Study
2017Wie der Maschinenbauer von Echsen das Trinken erlernen kann ...
Winands, Kai
Journal Article
2017Wire-based laser metal deposition for additive manufacturing of TiAl6V4: Basic investigations of microstructure and mechanical properties from build-up parts
Klocke, Fritz; Arntz, Kristian; Klingbeil, Nils; Schulz, Martin
Conference Paper
2017Wissenschaft in der Produktionspraxis
Schmitt, Robert; Brand, J.; König, Niels
Conference Paper
2017Zeitliche Unsicherheiten in der Einzelfertigung. Ein Modell zur Bewertung von Einflüssen und Risiken auf Zeitunsicherheiten in einer synchronisierten Einzelfertigung
Heutmann, Timo; Tils, Alexander; Schmitt, Robert
Journal Article
2016 Industrie 4.0. Internationaler Benchmark, Zukunftsoptionen und Handlungsempfehlungen für die Produktionsforschung
Gausemeier, J.; Klocke, F.; Dülme, C.; Eckelt, D.; Kabasci, D.; Kohlhuber, M.; Schön, N.; Schröder, S.
Report
2016 Mechanismen der Nahtfehlerentstehung beim Laserstrahlhartlöten
Frank, S.
Dissertation
2016 Optimierung der Genauigkeit fünfachsiger Werkzeugmaschinen
Flore, J.
Dissertation
2016Abschlussbericht zum KMU-innovativ-Verbundprojekt "HotWheel". Laserunterstützte Umformung innovativer Hochleistungswerkstoffe für den automobilen Leichtbau
Brummer, Christoph
Report
2016Adhesion of TiC and MoN physical vapor deposition coatings determined by innovative test methods directly on coated bearings
Bouzakis, K.-D.; Charalampous, P.; Skordaris, G.; Dimofte, F.; Ene, N.M.; Anderson, C.; Chavez, A.; Ekstrom, B.; Fetty, J.R.
Journal Article
2016Alles in die richtige Form
Klocke, Fritz; Wollbrink, Moritz
Journal Article
2016Analyse von Produktionsprozessen mit Life Cycle Assessment: Schaffung von Transparenz und Erkennung von Kostenpotenzialen
Vollmer, Thomas; Lindner, Florian; Schmitt, Robert
Journal Article
2016Analysis of wear of fused silica moulding using glassy carbon moulds
Klocke, F.; Dambon, O.; Liu, G.; Dukwen, J.
Journal Article
2016Analyzing the integration of technology platform strategies into the situational context of diversified companies
Schuh, G.; Ryschka, S.; Rollmann, A.; Wetterney, T.
Conference Paper
2016Approach for self-optimising assembly of optical systems
Holters, M.; Gatej, A.; Haag, S.; Müller, T.; Loosen, P.; Brecher, C.
Journal Article
2016Approaching improved adhesive bonding repeatability
Schlette, C.; Müller, T.; Romann, J.; Brecher, C.
Conference Paper
2016Artifizielle Descement-Membran
Gutermuth, Angela
Patent
2016Assessment of risks in manufacturing using discrete-event simulation
Landtsheer, Renaud de; Ospina, Gustavo; Massonet, Philippe; Ponsard, Christophe; Printz, Stephan; Jeschke, Sabina; Härtel, Lasse; Cube, Johann Philipp von; Schmitt, Robert
Book Article
2016Automation in the context of stem cell production - where are we heading with Industry 4.0?
Kulik, Michael; Ochs, Jelena; König, Niels; Schmitt, Robert
Journal Article
2016Automatisierte NC-Programmerstellung für Senkelektroden
Brecher, C.; Nittinger, J.; Krekeler, F.-G.
Journal Article
2016The BabyLux project - an optical neuro-monitor of cerebral oxygen metabolism and blood flow for neonatology
Weigel, Udo Michael; Andresen, Björn; Chamizo, Victor; Contini, Davide; Carli, Agnese de; Donat, Roger; Durduran, Turgut; Erdmann, Rainer; Fumagalli, Monica; Giovannella, Martina; Greisen, Gorm; Hyttel-Sørensen, Simon; König, Niels; Lauritsen, Kristian; Pagliazzi, Marco; Pifferi, Antonio; Rehberger, Matthias; Rocchetti, Igancio; Röhlicke, Tino; Spinelli, Lorenzo; Wahl, Michael; Torricelli, Alessandro
Conference Paper
2016Bestimmung der kundennutzenoptimalen Produktvielfalt produzierender Unternehmen
Schuh, Günther; Wentzel, Daniel; Riesener, Michael; Koch, Jan; Erkin, Aras; Zeller, Paul
Journal Article
2016Bestimmung der kundennutzenoptimalen Produktvielfalt produzierender Unternehmen
Schuh, G.; Wentzel, D.; Riesener, M.; Koch, J.; Erkin, A.; Zeller, P.
Journal Article
2016Bionisch funktionalisierte Oberflächen durch laserbasierte Nachbildung der Schuppenstruktur feuchtigkeitserntender Echsen VIP 0265 »BioLas.exe«
Winands, Kai; Mescheder, Holger; Pothen, Mario
Report
2016Bulk metallic glass mold for high volume fabrication of micro optics
He, P.; Li, L.; Wang, F.; Dambon, O.; Klocke, F.; Flores, K.M.; Yi, A.Y.
Conference Paper, Journal Article
2016Capabilities and performance of the wavefront-based alignment in multi element optical systems
Krappig, R.; Schmitt, R.
Conference Paper
2016Chemical influence of different pH-values on ductile mode processing through ultra-precision diamond turning
Doetz, M.; Dambon, O.; Klocke, F.; Faehnle, O.
Conference Paper
2016CKD-Supply Chains in der Serienfertigung des Maschinenbaus
Schuh, G.; Ihne, M.
Journal Article
2016Collaborative technology scanning for potentially disruptive technologies
Schuh, Günther; Kabasci, Patrick; Drescher, Toni
Conference Paper
2016Comprehensive technology exploitation using system dynamics and scenario analysis
Schuh, Günther; Drescher, Toni; Engel, Markus; Kreutzer, Ramon
Journal Article
2016Continuous thermoforming of unidirectional fiber reinforced tapes for the manufacturing of 3D lightweight components
Brecher, Christian; Buschhoff, Clemens; Emonts, Michael
Conference Paper
2016Correlation between the wear behavior of coated cemented carbide tools and coatings properties assessed by nano-indentations, nanoand micro-impact tests
Bouzakis, Konstantinos-Dionysios; Charalampous, Panagiotis; Bouzakis, Emmanouil; Kotsanis, Tilemachos; Skordaris, Georios; Michailidis, Nikolaos; Klocke, Fritz; Bergs, Thomas; Ottersbach, Michael; Busch, Marc
Conference Paper
2016Cyber-physical systems in manufacturing
Monostori, László; Kádár, Botond; Bauernhansl, Thomas; Kondoh, Shinsuke; Kumara, Soundar R.; Reinhart, Gunther; Sauer, Olaf; Schuh, Günther; Sihn, Wilfried; Ueda, Kanji
Journal Article
2016Cybernetic approach for controlling technology management activities
Schuh, Günther; Kramer, Linda
Journal Article, Conference Paper
2016Datengetriebenes Qualitätsmanagement als Bestandteil einer vernetzten, adaptiven Produktion
Schmitt, Robert; Heutmann, Timo; Permin, Eike; Niendorf, Laura
Conference Paper
2016Design and control of a vertical ball juggling delta robot without visual guidance
Shareef, Z.; Just, V.; Teichrieb, H.; Trächtler, A.
Conference Paper
2016Developing an automated robotic factory for novel stem cell therapy production
Rafiq, Q.A.; Twomey, K.; Kulik, M.; Leschke, C.; O'Dea, J.; Callens, S.; Gentili, C.; Barry, F.P.; Murphy, M.
Journal Article
2016Development and ramp-up of automated laser assembly
Axt, Christoph; Rübenach, Olaf; Haverkamp, Tobias; Garlich, Torsten; Seelert, Wolf; Schlette, Christian; Losch, Daniel; Roßmann, Jürgen; Claver Pont, Pere; Ventura-Traveset, Antonio; Haag, Sebastian; Sauer, Sebastian; Brecher, Christian
: Haag, Sebastian
Report
2016Development of an artifact-free aneurysm clip
Brack, Alexander; Senger, Sebastian; Fischer, Gerrit; Janssen, Henning; Oertel, Joachim; Brecher, Christian
Journal Article
2016Der Digitale Schatten in der Auftragsabwicklung
Schuh, Günther; Blum, Matthias; Reschke, Jan; Birkmeier, Martin
Journal Article
2016A discrete event simulation approach for quantifying risks in manufacturing processes
Landtsheer, Renaud de; Ospina, Gustavo; Massonet, Philippe; Ponsard, Christophe; Printz, Stephan; Härtel, Lasse; Cube, Johann Philipp von
Conference Paper
2016E³-Produktion. Ultrakurze Prozessketten bewerten und verbessern
Klocke, Fritz; Vollmer, Thomas; Klingbeil, Nils; Wegener, Maximilian; Alkhayat, Moritz; Lahl, Mike; Kluth, Andreas
Journal Article
2016Effizientes Technologiemonitoring - Ableitung von Indikatoren zur Früherkennung technologiebezogener Chancen und Risiken
Schuh, Günther; König, Christina; Wellensiek, Markus
Conference Paper
2016Eigenschaften und Präzision der wellenfrontbasierten Justage
Krappig, Reik
Journal Article
2016Energy efficiency potentials of different robot design concepts
Permin, Eike; Kurilova-Palisaitiene, Jelena; Mannheim, Tom; Buhse, Kai; Schmitt, Robert; Corves, Burkhard; Björkman, Mats
Conference Paper
2016Entwicklung eines Verschleißmodells auf Basis der Degradationsmechanismen von Platin-Iridium-Beschichtungen beim Glaspressen
Bernhardt, F.
Dissertation
2016Entwicklungen zur anwendungsgerechten Entlüftung von formgebenden Werkzeugen mittels komplexer Mikrostrukturen
Winands, Kai; Mescheder, Holger
Report
2016Experimental investigations on the machinability of tungsten carbides in orthogonal cutting with diamond coated tools
Ottersbach, Michael
Presentation
2016Experimental investigations on the machinability of tungsten carbides in orthogonal cutting with diamond-coated tools
Ottersbach, Michael; Zhao, Wei
Conference Paper, Journal Article
2016Flexible assembly module for beam-shaping product families based on support structures
Haag, S.; Rübenach, O.; Beleke, A.; Haverkamp, T.; Müller, T.; Zontar, D.; Wenzel, C.; Brecher, C.
Conference Paper
2016Fraunhofer-Institut für Produktionstechnologie. Jahresbericht 2015
 
Annual Report
2016Friction analyses of dimple-structured surface
Stoeterau, Rodrigo Lima; Janssen, Andreas; Mallmann, Guilherme
Journal Article
2016Funktionszuverlässigkeit technischer selbstoptimierender Systeme zur Regelung von Produktionsprozessen
Permin, E.
Dissertation
2016The future of glass optics replication
Kreilkamp, Holger; Staasmeyer, Jan-Helge; Niendorf, Laura
Journal Article
2016Gemeinsam sind sie stark
Wiederhold, Michael; Greipel, Jonathan; Schmitt, Robert; Ottone, Renato
Journal Article
2016Governance framework for the operation of focal-organized, self-financed research networks
Schuh, Günther; Wölk, Sebastian; Faulhaber, Marcel
Journal Article
2016High volume production of lightweight automotive structures
Buschhoff, Clemens; Brecher, Christian; Emonts, Michael
Conference Paper
2016High-speed microscopy of continuously moving cell culture vessels
Schenk, Friedrich; Brill, Nicolai; Marx, Ulrich; Hardt, Daniel; König, Niels; Schmitt, Robert
Journal Article
2016Hochdurchsatz-Mikroskopie von Mikrotiterplatten auf Basis einer kontinuierlichen Objektbewegung
Schenk, F.W.
Dissertation
2016Hochgeschwindigkeitsmikroskopie zur Qualitätskontrolle
Schenk, Friedrich; Arnold, Steffen; Reiff, Ellen-Christine
Journal Article
2016Hochgeschwindigkeitsmikroskopie zur Qualitätskontrolle
Schenk, Friedrich; Arnold, Steffen; Reiff, Ellen-Christine
Journal Article
2016A holistic approach to risk oriented lifecycle engineering
Pickshaus, Tobias; Kandt, Alexandra; Hesse, Stephan; Fleischer, Karsten; Schmitt, Robert
Conference Paper, Journal Article
2016A hybrid optimization approach in non-isothermal glass molding
Vu, Anh-Tuan; Kreilkamp, Holger; Krishnamoorthi, Bharathwaj Janaki; Dambon, Olaf; Klocke, Fritz
Conference Paper
2016Identifikation und Lokalisierung von Werkzeugen und Objekten. Auf Werkstattebene auf Basis von Bluetooth 4.0
Brecher, C.; Pallasch, C.; Hoffmann, N.; Obdenbusch, M.
Journal Article
2016Identifying and evaluating disruptive technologies using technology scanning
Schuh, Günther; Kabasci, Patrick; Drescher, Toni; Ryschka, Simon; Wetterney, Tim
Conference Paper
2016In drei Phasen zum Ideal. Mit Daten zur Organisationskultur die Qualität verbessern
Baron, Harald; Plutz, Martin; Schmitt, Robert
Journal Article
2016In Serie lokal verstärken
Brecher, Christian; Janssen, Henning; Buschhoff, Clemens; Peters, Tido
Journal Article
2016Increasing cost and eco efficiency for selective tape placement and forming by adaptive process design
Brecher, Christian; Schmitt, Robert; Lindner, Florian; Peters, Tido; Emonts, Michael; Große Böckmann, Markus
Journal Article, Conference Paper
2016Individuell und automatisiert. Vernetzte Produktionstechnik für die additive Fertigung individualisierter Faserverbundbauteile
Brecher, Christian; Werner, Daniel; Janssen, Henning; Hildebrandt, Markus; Beste, Christian
Journal Article
2016Industrie 4.0 - A Paradigm Shift
Schuh, Günther
Book Article
2016Influence of the interlayer material selection for PtIr-coatings on the degradation mechanisms for use in Precision Glass Molding
Friedrichs, Marcel; Dambon, Olaf; Bernhardt, Frank; Dong, Zhen; Klocke, Fritz
Conference Paper
2016Informationsbeschaffung in Start-ups
Schuh, Günther; Lau, Felix
Journal Article
2016Infrarotkameragestützte Prozesstemperaturerfassung
Brecher, Christian; Emonts, Michael; Kukla, Christian
Journal Article
2016Inline plasma analysis as tool for process monitoring in laser micro machining for multi-layer materials
Kunze, Rouwen; Mallmann, Guilherme; Schmitt, Robert
Journal Article, Conference Paper
2016Investigation of the surface integrity and fatigue strength of Inconel718 after wire EDM and machine hammer peening
Trauth, D.; Klocke, F.; Welling, D.; Terhorst, M.; Mattfeld, P.; Klink, A.
Journal Article
2016Kostenpotenziale aufdecken mit Shopfloor-Daten
Schmitt, Robert; Große Böckmann, Markus; Vollmer, Thomas
Journal Article
2016Kunststoffkomponenten für LED-Beleuchtungsanwendungen
Brecher, Christian; Baum, Christoph; Simone, Daniel de; Meiers, Bernd; Krappig, Reik
Book
2016Laminate aus duroplastischen Prepregs mit aktivierbarer Adhäsion
Werner, Daniel; Janssen, Henning; Brecher, Christian
Journal Article
2016Laser-assisted metal spinning for an efficient and flexible processing of challenging materials
Brummer, C.; Eck, S.; Marsoner, S.; Arntz, K.; Klocke, F.
Conference Paper, Journal Article
2016Machine platform and software environment for rapid optics assembly process development
Sauer, S.; Müller, T.; Haag, S.; Zontar, D.
Conference Paper
2016Makrosimulation optimiert Fräsoperationen
Bobek, Thomas; Suarez-Martel, Diana
Journal Article
2016Messen, was wir spüren?
Frank, Daniel; Schmitt, Robert
Journal Article
2016Methodenkonfiguration zur Kostenanalyse technischer Beschaffungsgüter
Ünlü, V.
Dissertation
2016Micro-structuring of glassy carbon for precision glass molding of binary diffractive optical elements
Prater, K.; Dukwen, J.; Scharf, T.; Herzig, H.P.; Plöger, S.; Hermerschmidt, A.
Journal Article
2016Mit Konnektivität zur erfolgreichen Vernetzung
Bernardy, Anne; Ekanayake, Sarah; Kunze, Rouwen
Journal Article
2016Mit Smart Glasses & Co. zur intelligenten und mitarbeiterorientierten Fabrik
Plutz, Martin; Große Böckmann, Markus; Siebenkotten, Philipp; Schmitt, Robert
Journal Article
2016Model for the network-specific design of the type-based governance of focal-organized, self-financed research networks: Conceptual research design
Schuh, Günther; Wölk, Sebastian
Journal Article
2016Model of coating wear degradation in precision glass molding
Klocke, Fritz; Dambon, Olaf; Rohwerder, Michael; Bernhardt, Frank; Friedrichs, Marcel; Merzlikin, Sergly V.
Journal Article
2016Model-based adhesive shrinkage compensation for increased bonding repeatability
Müller, T.; Schlette, C.; Lakshmanan, S.; Haag, S.; Zontar, D.; Sauer, S.; Wenzel, C.; Brecher, C.; Roßmann, J.
Conference Paper
2016Model-based decision support in supply chains - requirements for monetary supply risk quantification
Cube, Johann Philipp von; Härtel, Lasse; Schmitt, Robert
Journal Article, Conference Paper
2016Modeling and simulation of tool engagement and prediction of process forces in milling
Cabral, G. F.
Dissertation
2016Modular programming of adaptive CAx manufacturing process chains
Spöcker, G.
Dissertation
2016Monetary quantification of supply risks of manufacturing enterprises - discrete event simulation based approach
Cube, Philipp von; Härtel, Lasse; Schmitt, Robert; Ponsard, Christophe; Massonet, Philippe; Landtsheer, Renaud de; Ospina, Gustavo; Printz, Stephan; Jeschke, Sabina
Journal Article, Conference Paper
2016A new model to ascertain product maturity in product development processes
Kandt, Alexandra; Pickshaus, Tobias; Fleischer, Karsten; Schmitt, Robert
Journal Article, Conference Paper
2016Next generation hardware development
Schuh, Günther; Wetterney, Tim; Lau, Felix; Schröder, Stephan
Conference Paper
2016Next generation hardware development: Requirements and configuration options for the organization of procurement activities in the context of agile new product development
Schuh, Günther; Schröder, Stephan; Lau, Felix; Wetterney, Tim
Conference Paper
2016Next generation hardware development: The role of technology intelligence to reduce uncertainty in agile new product development
Schuh, G.; Lau, F.; Schröder, S.; Wettemey, T.
Conference Paper
2016Nonisothermal glass molding for the cost-efficient production of precision freeform optics
Vu, A.-T.; Kreilkamp, H.; Dambon, O.; Klocke, F.
Journal Article
2016Novel platform for fully automated generation and expansion of highly standardized iPS cells
Kulik, M.; Elanzew, A.; Haupt, S.; Wanek, P.; Ochs, J.; Konig, N.; Zenke, M.; Brustle, O.; Schmitt, R.
Abstract
2016OCT for process monitoring of laser transmission welding
Schmitt, Robert; Ackermann, Philippe
Journal Article
2016Optical coherence tomography (OCT): The missing link in gastrointestinal imaging?
Rehberger, Matthias; Wilhelm, Dirk; Janssen, Klaus-Peter; Günther, Matthias; Witte, Michael; König, Niels; Schmitt, Robert
Abstract
2016Optical modelling of VCSEL-assisted thermoplastic tape placement
Weiler, T.; Emonts, M.; Striet, P.; Gronenborn, S.; Janssen, H.
Conference Paper
2016Organisationskultur und Qualitätsmanagement
Plutz, Martin; Heine, Ina; Schmitt, Robert
Book Article
2016Polarization-sensitive optical coherence tomography-based imaging, parameterization, and quantification of human cartilage degeneration
Brill, Nicolai; Wirtz, Mathias; Merhof, Dorit; Tingart, Markus; Jahr, H.; Truhn, Daniel; Schmitt, Robert; Nebelung, Sven
Journal Article
2016Powder flux regulation in the laser material deposition process
Arrizubieta, J.I.; Wegener, M.; Arntz, K.; Lamikiz, A.; Ruiz, J.E.
Journal Article, Conference Paper
2016Präzision und Sensorspezifikationen der wellenfrontbasierten Justage kleinaperturiger optischer Systeme
Krappig, R.; Schmitt, R.
Journal Article, Conference Paper
2016Präzisionsfertigung von Großbauteilen
Brecher, Christian; Schmitt, Robert; Behrens, Jan; Ohlenforst, Markus; Peterek, Martin; Wennemer, Matthias
Journal Article
2016Precision glass molding of complex shaped chalcogenide glass lenses for IR applications
Staasmeyer, J.-H.; Wang, Y.; Liu, G.; Dambon, O.; Klocke, F.
Conference Paper
2016Precision glass molding of high-resolution diffractive optical elements
Prater, K.; Dukwen, J.; Scharf, T.; Herzig, H.P.; Plöger, S.; Hermerschmidt, A.
Conference Paper
2016Precision glass molding: Cost efficient production of glass-optics with spectral range from 180nm ultraviolet to 13μm thermal infrared
Staasmeyer, J.-H.; Kreilkamp, H.; Dambon, O.; Klocke, F.
Conference Paper
2016Precision molding of optics: A review of its development and applications
Zhang, L.; Liu, G.; Zhao, X.; Dambon, O.; Klocke, F.; Yi, A.Y.
Conference Paper
2016Process-induced changes in optical properties of precision molded glass lenses
Hollstegge, D.
Dissertation
2016Process-structure-property relationship of laser-joined thermoplastic metal hybrids
Amend, P.; Mallmann, G.; Roth, S.; Schmitt, R.; Schmidt, M.
Journal Article, Conference Paper
2016Product data and Sensor-based intelligent drive Control for flexible manufacturing and intralogistic processes
Geneiß, V.; Hedayat, C.; Bertelsmeier, F.; Henke, C.; Vathauer, K.-E.; Geßner, T.
Conference Paper
2016Produkt- und Prozessbewertung im Leichtbau
Lindner, Florian; Schmitt, Robert; Peters, Tido
Journal Article
2016Programming of adaptive repair process chains using repair features and function blocks
Spöcker, Gunter; Schreiner, Thorsten; Huwer, Tobias; Arntz, Kristian
Journal Article
2016Das Quality Culture Assessment Instrument
Plutz, Martin; Heine, Ina; Schmitt, Robert
Book Article
2016Quantitative comparison of measurement methods for the evaluation of micro- and nanostructures written with 2PP
Harnisch, Emely Marie; König, Niels; Schmitt, Robert
Conference Paper
2016Quantitative Erfassung externer Unsicherheiten bei der Gestaltung von Produktionsnetzwerken
Schuh, G.; Prote, J.-P.; Schmitz, T.; Nett, S.
Journal Article
2016Quantitative OCT and MRI biomarkers for the differentiation of cartilage degeneration
Nebelung, S.; Brill, N.; Tingart, M.; Pufe, T.; Kuhl, C.; Jahr, H.; Truhn, D.
Journal Article
2016Query-based risks management of manufacturing processes
Ponsard, Christophe; Landtsheer, Renaud de; Ospina, Gustavo; Printz, Stephan; Cube, Johann Philipp von
Conference Paper
2016Replicative manufacturing of complex lighting optics by non-isothermal glass molding
Kreilkamp, H.; Vu, A.T.; Dambon, O.; Klocke, F.
Conference Paper
2016Requirement analysis of inspection equipment for integrative mechatronic product and production system development: Model-based systems engineering approach
Lukei, M.; Hassan, B.; Dumitrescu, R.; Sigges, T.; Derksen, V.
Conference Paper
2016Ressourceneffiziente Gestaltung von Prozessketten mit additiven Fertigungsverfahren
Wegener, M.
Dissertation
2016Rezeptur für die optimale Kostenstruktur
Voet, Henning; Falk, Björn; Schmitt, Robert H.
Journal Article
2016Scannerbasierte, koaxiale Topographiemessung auf Basis der kurzkohärenten Interferometrie für die Lasermaterialbearbeitung bei 515 nm
Kunze, Rouwen; Schmitt, Robert
Conference Paper
2016Scanning measurement of aspheres
Riedel, J.; Stürwald, S.; Schmitt, R.
Journal Article
2016Selection of competitive manufacturing resources in tooling based on manufacturing concepts
Klocke, Fritz; Arntz, Kristian; Heeschen, Dominik; Johannsen, Lars; Prümmer, Marcel
Conference Paper
2016Self-optimizing production systems
Permin, Eike; Bertelsmeier, Felix; Blum, Matthias; Bützler, Jennifer; Haag, Sebastian; Kuz, Sinem; Özdemir, Denis; Stemmler, Sebastian; Thombansen, Ulrich; Schmitt, Robert; Brecher, Christian; Schlick, Christopher; Abel, Dirk; Poprawe, Reinhart; Loosen, Peter; Schulz, Wolfgang; Schuh, Günther
Journal Article, Conference Paper
2016Sicher von alt zu neu
Plutz, Martin; Alsheimer, Patrick; Schmitt, Robert
Journal Article
2016Simulation und Analyse geometrischer Einflüsse in elektronisch durchstimmbaren Weisslicht-Interferometern
Koerfer, F.
Dissertation
2016Smart Glasses in der Produktion
Plutz, Martin; Große Böckmann, Markus; Siebenkotten, Philipp; Schmitt, Robert
Study
2016Smart production of tubular thermoplastic composite products
Brecher, Christian; Emonts, Michael; Peters, Tido
Presentation
2016Smartglasses im Einsatz auf dem Shopfloor - Erfahrungen, Potentiale und Limitationen
Krauß, Jonathan; Permin, Eike; Schmitt, Robert; Große Böckmann, Markus; Plutz, Martin
Journal Article
2016Social media applications for knowledge exchange in organizations
Valdez, André Calero; Schaar, Anne Kathrin; Bender, Jens; Aghassi, Susanne; Schuh, Günther; Ziefle, Martina
Book Article
2016Superfinish-machining of steel molds for injection molding
Klocke, F.; Dambon, O.; Doetz, M.
Conference Paper
2016A survey on risk-management and tooling support for procurement processes in supply chains
Printz, Stephan; Cube, Johann Philipp von; Ponsard, Christophe; Landtsheer, Renaud de; Ospina, Gustavo; Massonet, Philippe; Schmitt, Robert; Jeschke, Sabina
Conference Paper
2016Systemizing the Requirements of Technology Platforms in Diversified Companies
Schuh, Günther; Ryschka, Simon; Hysky, Lukas
Journal Article
2016Target-oriented analysis of resource consumptions for production planning
Vollmer, Thomas; Klingbeil, Nils; Wegener, Max; Permin, Eike; Arntz, Kristian; Klocke, Fritz; Schmitt, Robert H.
Abstract
2016Technological and simulative analysis of power skiving
Klocke, Fritz; Brecher, Christian; Löpenhaus, Christoph; Ganser, Philipp; Staudt, Julian; Krömer, Markus
Journal Article, Conference Paper
2016Technology capability: Identification and assessment of technology and market specific exploitation options
Schuh, Günther; Vogt, Florian; Drescher, Toni
Journal Article
2016TeSaMa: Technical safety maintenance system in mechanical engineering
Jeschke, Sabina; Lahl, Kristina; Cube, Philipp von; Dzwiarek, Marek; Schmitt, Robert
Report
2016The Texas horned lizard as model for robust capillary structures for passive directional transport of cooling lubricants
Comanns, Philipp; Winands, Kai; Pothen, Mario; Bott, Raya A.; Wagner, Hermann; Baumgartner, Werner
Conference Paper
2016Thermal investigation of interaction between high-power CW-laser radiation and a water-jet
Brecher, C.; Janssen, H.; Eckert, M.; Schmidt, F.
Journal Article, Conference Paper
2016Thermo Energetic Design of Machine Tools and Requirements for Smart Fluid Power Systems
Brecher, Christian; Jasper, David; Wennemer, Matthias; Klatte, Michel
Conference Paper
2016Tool technologies for milling of hardmetals and ceramics
Bergs, Thomas; Richter, Volkmar; Ottersbach, Michael; Pötschke, Johannes; Hochmuth, Carsten; Busch, Katja
Conference Paper
2016Tooling in China. Spritzgießwerkzeugbau
Boos, Wolfgang; Salmen, Michael; Johannsen, Lars; Hensen, Tobias; Begovic, Advan; Wollbrink, Moritz
Study
2016Tooling in Germany
Boos, Wolfgang; Salmen, Michael; Hensen, Tobias; Johannsen, Lars; Kelzenberg, Christoph; Schippers, Max
Study
2016Towards optical coherence tomography-based elastographic evaluation of human cartilage
Nebelung, S.; Brill, N.; Müller, F.; Tingart, M.; Pufe, T.; Merhof, D.; Schmitt, R.; Jahr, H.; Truhn, D.
Journal Article
2016Tribological wear analysis and numerical lifetime prediction of glassy carbon tools in fused silica molding
Dukwen, Julia; Friedrichs, Marcel; Liu, Gang; Tang, Minjie; Dambon, Olaf; Klocke, Fritz
Journal Article
2016Understanding the »Market-Pull«: Accelerating the Exploitation of Manufacturing Technologies
Schuh, Günther; Kreutzer, Ramon; Graw, Myron
Journal Article
2016Using liferay as an interdisciplinary scientific collaboration portal
Schuh, Günther; Bräkling, André; Calero Valdez, André; Schaar, Anne-Kathrin; Ziefle, Martina
Conference Paper
2016Variations in the cutting performance of PVD-coated tools in milling Ti6Al4V, explained through temperature-dependent coating properties
Michailidis, N.
Journal Article
2016Verfahren und eine Vorrichtung zur Bildgebung in der Mikroskopie
Schenk, Friedrich; Brill, Nicolai; Marx, Ulrich
Patent
2016Vergleich von Massiv- und Fülldraht als Schweißzusatz für das Laserauftragschweißverfahren
Klingbeil, Nils; Schulz, Martin; Sprengel, Maximilian
Conference Paper
2016Warmumformung von Präzisionsoptiken
Grunwald, Tim; Dambon, Olaf; Klocke, Fritz
Book Article
2016Wavefront-based active alignment of multi-element optical systems
Krappig, R.; Schmitt, R.
Conference Paper
2016WBA Projekt: Automatisierungskonzepte für den Werkzeugbau
Johannsen, Lars; Prümmer, Marcel
Book Article
2016WBA Projekt: Entlüftungskonzepte für Spritzgießwerkzeuge
Winands, Kai; Dröscher, Tim
Book Article
2016WBA Projekte: Intelligentes Werkzeug
Kelzenberg, Christoph; Hensen, Tobias; Wollbrink, Moritz
Book Article
2016Zerspanung von Hartmetall mit definierter Schneide im unterbrochenen Schnitt
Ottersbach, Michael; Koch, Matthias
Conference Paper