Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2018Analysis of form deviation in non-isothermal glass molding
Kreilkamp, Holger; Grunwald, Tim; Dambon, Olaf; Klocke, Fritz
Conference Paper
2018Automated assembly of lens barrels with active wavefront sensor guiding
Berger, Marvin; Müller, Tobias; Meiers, Bernd; Sauer, Sebastian; Krappig, Reik; Baum, Christoph; Brecher, Christian
Conference Paper
2018Automated assembly of microfluidic "lab-on-a-disc"
Berger, Marvin; Müller, Tobias; Voebel, Toni; Baum, Christoph; Glennon, T.; Mishra, R.; Kinahan, D.; King, D.; Ducrée, J.; Brecher, Christian
Conference Paper
2018Automated polarization control for the precise alignment of laser-induced self-organized nanostructures
Hermens, Ulrike; Pothen, Mario; Winands, Kai; Arntz, Kristian; Klocke, Fritz
Journal Article
2018Automated shaping of laser-induced nanoripples on freeform surfaces
Hermens, Ulrike
Poster
2018A Bayesian approach to process model evaluation in short run SPC
Permin, Eike; Voigtmann, Christoph; Schmitt, Robert H.
Journal Article
2018Bias voltage optimum adjustment considering coatings' strength and adhesion requirements when cutting various steels
Skordaris, G.; Bouzakis, K.-D.; Kotsanis, T.; Charalampous, P.; Bouzakis, E.; Bejjani, R.
Journal Article
2018The connected worker
Plutz, Martin
Journal Article
2018Continuous-flow, microfluidic, qRT-PCR system for RNA virus detection
Fernández-Carballo, B. Leticia; McBeth, Christine; McGuiness, Ian; Kalashnikov, Maxim; Baum, Christoph; Borrós, Salvador; Sharon, Andre; Sauer-Budge, Alexis F.
Journal Article
2018Cutting force model for gear honing
Bergs, T.
Journal Article
2018Definition of smart retrofitting: First steps for a company to deploy aspects of industry 4.0
Guerreiro, Bruno V.; Lins, Romulo G.; Sun, Jianing; Schmitt, Robert
Conference Paper
2018Design and function for freeform surfaces. How to texture 3D parts with micro- and nanostructures automated and distortion-free
Mescheder, Holger; Hermens, Ulrike
Journal Article
2018Design framework for model-based self-optimizing manufacturing systems
Thombansen, Ulrich; Buchholz, Guido; Frank, Daniel; Heinisch, Julian; Kemper, Maximilian; Pullen, Thomas; Reimer, Viktor; Rotshteyn, Grigory; Schwenzer, Max; Stemmler, Sebastian; Abel, Dirk; Gries, Thomas; Hopmann, Christian; Klocke, Fritz; Poprawe, Reinhardt; Reisgen, Uwe; Schmitt, Robert
Journal Article
2018Ductile grinding of tungsten carbide applying standard CNC machines
Doetz, M.; Dambon, O.; Klocke, F.; Vogt, C.; Rascher, R.; Faehnle, O.
Conference Paper
2018Echtzeit-Maschinendaten auf mobile Endgeräte bringen: Smart visualisiert
Lindner, Florian; Permin, Eike; Schmitt, Robert; Gesthuysen, Frederik
Journal Article
2018Effect of niobium on microstructure-property relationship in H11 hot-work tool steel via wire- and powder-based laser metal deposition
Teli, M.; Klocke, F.; Arntz, K.; Winands, K.
Journal Article
2018Experimental investigation of contact heat transfer coefficients in nonisothermal glass molding by infrared thermography
Vu, A.T.; Vu, A.N.; Liu, G.; Grunwald, T.; Dambon, O.; Klocke, F.; Bergs, T.
Journal Article
2018The external scent efferent system of selected European true bugs (Heteroptera): A biomimetic inspiration for passive, unidirectional fluid transport
Hischen, Florian; Buchberger, Gerda; Plamadeala, Cristina; Armbruster, Oskar; Heiss, Ernst; Winands, Kai; Schwarz, Martin; Jüttler, Bert; Heitz, Johannes; Baumgartner, Werner
Journal Article
2018Frei verkettete Montagesysteme - Ein Ausblick
Göppert, Amon; Hüttemann, Guido; Jung, Sven; Grunert, Dennis; Schmitt, Robert H.
Journal Article
2018Freiformflächen mit dem Laser gezielt strukturieren
Mescheder, Holger; Hermens, Ulrike
Journal Article
2018Functional reliability of cognitive control systems for manufacturing processes
Permin, Eike; Lossie, Karl; Schmitt, Robert H.
Journal Article
2018Hellsehen in vier Schritten. Data Analytics für das digitale Qualitätsmanagement
Elser, Hannes; Heutmann, Timo; Lindemann, Marie; Schmitt, Robert
Journal Article
2018Highly modular and generic control software for adaptive cell processing on automated production platforms
Jung, Sven; Ochs, Jelena; Kulik, Michael; König, Niels; Schmitt, Robert H.
Journal Article, Conference Paper
2018Increasing critcal depth of cut in ductile mode machining of tungsten carbide by process parameter controlling
Doetz, M.; Dambon, O.; Klocke, F.; Lee, J.; Fähnle, O.; Langenbach, E.
Conference Paper
2018Instrument zur Steigerung des branchenübergreifenden Verwertungspotenzials von Fertigungstechnologien
Graw, Myron
Dissertation
2018Klein, kleiner, Nano. Optische Oberflächenmessverfahren zur Charakterisierung von Mikro- und Nanostrukturen
König, Niels; Schmitt, Robert H.
Journal Article
2018Laser-based and CAx-assisted system solution for the automated mold repair - ToolRep
Winands, Kai
Poster
2018Non-contact inspection of complex optical components
Depiereux, Frank; Rämer, Kurt
Journal Article
2018Numerical-experimental investigation of load paths in DP800 dual phase steel during Nakajima test
Bergs, Thomas; Nick, Matthias; Feuerhack, Andreas; Trauth, Daniel; Klocke, Fritz
Conference Paper
2018Ohne Turbulenzen ins Audit. In sechs Schritten zum zertifizierten Zulieferer nach EN 9100
Vollmer, Thomas; Schmitt, Robert H.; Bünck, Matthias
Journal Article
2018One for all and all for one
Winands, Kai
Journal Article
2018Overlap ratio in wire- and powder-based laser metal deposition of H11 + Nb for hot forging dies
Teli, M.; Klocke, F.; Arntz, K.; Winands, K.; Klingbeil, N.; Arrizubieta, J.I.
Conference Paper
2018A practical approach for the optimization of channel integrity in the sealing of shallow microfluidic devices made from cyclic olefin polymer
Ganser, Philipp; Baum, Christoph; Chargin, David; Sauer-Budge, Alexis F.; Sharon, Andre
Journal Article
2018Precise phase demodulation of single carrier-frequency interferogram by pixel-level Lissajous figure and ellipse fitting
Liu, Fengwei; Wu, Yongqian; Wu, Fan; König, Niels; Schmitt, Robert; Wan, Yongjian; Xu, Yan
Journal Article
2018Precision glass molding of fused silica optics
Friedrichs, Marcel; Dambon, Olaf; Pongs, Guido; Zhang, Lin; Yi, Allen Y.; Klocke, Fritz
Conference Paper
2018Process control in ductile mode machining of tungsten carbide
Doetz, M.; Dambon, O.; Klocke, F.; Faehnle, O.; Langenbach, E.
Conference Paper
2018Requirements gathering and validation for risk-oriented tool support in supply chains
Printz, Stephan; Ponsard, Christophe; Cube, Johann Philipp von; Landtsheer, Renaud de; Ospina, Gustavo; Massonet, Philippe; Schmitt, Robert; Jeschke, Sabina
Conference Paper
2018Ressourceneffizienz-Wertstrom
Vollmer, Thomas; Kerkhoff, Johannes; Große Böckmann, Markus; Permin, Eike
: Schmitt, Robert (Ed.)
Book
2018Service-oriented communication and control system architecture for dynamically interconnected assembly systems
Jung, Sven; Grunert, Dennis; Schmitt, Robert H.
Conference Paper
2018Smart Devices. Vermittler zwischen Mensch, Maschine und Software
Lindner, Florian; Kostyszyn, Kevin Nikolai; Grunert, Dennis; Lossie, Karl; Schmitt, Robert
Journal Article
2018SPDT and standard CNC-grinding of tungsten carbide molds for precision glass molding
Vogt, C.; Faehnle, O.; Doetz, M.
Conference Paper
2018Das Stammzelllabor der Zukunft. Forschen in einer automatisierten Testumgebung
Ochs, Jelena; Jung, Sven; Piotrowski, Tobias; Niessing, Bastian; König, Niels; Schmitt, Robert
Electronic Publication
2018Start of EU project: Weld-seam characterisation in adaptive lase melting deposition
Riedel, Christoph
Journal Article
2018Surface adaptive fast axis ultra precision turning
Brozio, Matthias; Sensen, Dominik; Wenzel, Christian; Freutel, Simon; Brecher, Christian
Conference Paper
2018Surface integrity in ultra-precision grinding of transparent ceramics
Klocke, Fritz; Dambon, Olaf; Bletek, Thomas; Höche, Thomas; Naumann, Falk; Hutzler, Thomas
Journal Article, Conference Paper
2018Target-oriented analysis of resource consumption in manufacturing process chains
Demmer, Axel; Klingbeil, Nils; Klocke, Fritz; Putz, Matthias; Schmitt, Robert; Vollmer, Thomas
Journal Article, Conference Paper
2018Three wagons method to analyze ductile mode grinding processes
Faehnle, O.; Doetz, M.; Dambon, O.; Langenbach, E.
Conference Paper
2018Wettbewerb Excellence in Production zum Werkzeugbau des Jahres 2018
Boos, Wolfgang; Salmen, Michael; Kelzenberg, Christoph; Helbig, Jens; Prümmer, Marcel; Ebbecke, Christoph; Horstkotte, Rainer
Journal Article
2018Wire- and powder-based laser metal deposition of H11 wire and niobium powder for hot forging application
Teli, Mahesh
Poster
2018Wire-based laser metal deposition (LMD-W) for additive manufacturing influences of the wire feed
Klingbeil, Nils
Poster
2018Wire-based Laser Metal Deposition (LMD-W) of Titanium Grade 5
Schulz, Martin
Poster
2018Wirkweise des Poliermittelträgers beim Polieren optischer Gläser
Wächter, Daniel
Dissertation
20173D bioprinting of GelMA scaffolds triggers mineral deposition by primary human osteoblasts
McBeth, C.; Lauer, J.; Ottersbach, M.; Campbell, J.; Sharon, A.; Sauer-Budge, A.F.
Journal Article
20173D printing meets FRP: More flexibility for highly-stressed components
Janssen, Henning
Journal Article
201770:20:10-Regel sichert Innovation
Drescher, Toni; Zeller, Paul
Journal Article
2017Active alignment of DOE based structured light application in consumer electronics
Zontar, D.; Müller, T.; Sauer, S.; Hettler, N.; Brecher, C.
Conference Paper
2017Adaptive, connected production of hybrid thermoplastic prototypes
Schulz, M.; Janssen, H.; Brecher, C.
Journal Article

 

<