Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2020Assistenzsystem für die Entwicklung nachhaltiger Produkte
Buchert, Tom
: Kohl, H.; Stark, Rainer; Anderl, R.
Dissertation
2020Avoidance of end crater imperfections at high-power laser beam welding of closed circumferential welds
Gook, S.; Ömer, Ü.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2020Einsatzverhalten keramischer Fräswerkzeuge bei der Zerspanung von glas- und kohlenstofffaserverstärkten Kunststoffen
Stawiszynski, Bartek
: Uhlmann, Eckart
Dissertation
2020Electrical discharge dressing of honing stones
Uhlmann, E.; Yabroudi, S.; Zimmermann, S.; Gerlitzky, G.; Polte, M.; Klink, U.; Sihling, B.
Journal Article
2020Experimental and numerical study on the influence of the laser hybrid parameters in partial penetration welding on the solidification cracking in the weld root
Bakir, N.; Üstündağ, Ö.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2020Hybrid laser arc welding of thick high-strength pipeline steels of grade X120 with adapted heat input
Üstündag, Ömer; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2020Influence of the fatty acid profile on the lubricating film formation in micro-milling process on 7050-T7451 aluminum alloy
Chanes de Souza, M.; Wiesner, H.M.; Kuche, Y.; Polte, J.; Oliveira Gomes, J. de; Uhlmann, E.
Journal Article
2020JUMP Planner
Rimmelspacher, Sven O.; Gering, Patrick; Lemcke, Anne; Schneider, Benjamin
Book Article
2020Mechanical Properties Characterization of Welded Automotive Steels
Javaheri, E.; Lubritz, J.; Graf, B.; Rethmeier, M.
Journal Article
2020Neueste Entwicklungen im Bereich des Hochleistungslaserstrahl- und Hybridschweißens von hohen Blechdicken
Üstündag, Ömer; Bakir, Nasim; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2020Organizational planning for quality management in the digital age
Behmer, F.J.; Jochem, R.
Journal Article
2020Prevention of liquid metal embrittlement cracks in resistance spot welds by adaption of electrode geometry
Böhne, Christoph; Meschut, Gerson; Biegler, Max; Frei, Julian; Rethmeier, Michael
Journal Article
2019 Elektromechanisches Glattwalzen von Stahllegierungen
Uhlmann, E.; Thom, S.; Prasol, L.; Haberbosch, K.; Drieux, S.
Journal Article
20193-Achs-Portalfräsmaschine als Demonstrator für ein modulares Werkzeugmaschinengestell
Uhlmann, E.; Polte, M.; Blumberg, J.; Peukert, B.
Journal Article
20194G/5G-Campusnetze und FTS-Einsatz
Chemnitz, Moritz; Vick, Axel; Lambrecht, Jens
Journal Article
2019Agent-based simulation for production planning and control in consideration of disruption events
Bui, M.D.; Nguyen, Q.H.; Kohl, H.
Conference Paper
2019Application of laser surface nanotexturing for the reduction of peri-implantitis on biomedical grade 5 Ti-6Al-4V dental abutments
Uhlmann, E.; Schweitzer, L.; Cunha, A.; Polte, J.; Huth-Herms, K.; Kieburg, H.; Hesse, B.
Conference Paper
2019Assessment of thermal cycles by combining thermo-fluid dynamics and heat conduction in keyhole mode welding processes
Artinov, A.; Karkhin, V.; Khomich, P.; Bachmann, M.; Rethmeier, M.
Journal Article
2019Automated tool-path generation for rapid manufacturing and numerical simulation of additive manufacturing LMD geometries
Biegler, Max; Wang, Jiahan; Graf, Benjamin; Rethmeier, Michael
Conference Paper
2019An automatic calibration approach for a multi-camera-robot system
Kroeger, Ole; Hügle, Johannes; Niebuhr, Carsten A.
Conference Paper
2019Automatically welded tubular X-joiuts
Schaumann, P.; Schürmann, K.; Pirtner, A.; Rethmeier, M.
Conference Paper
2019Avoidance of End Crater Imperfections at High-Power Laser Beam Welding of Closed Circumferential Welds
Gook, Sergej; Üstündag, Ömer; Gumenyuk, Andrey; Rethmeier, Michael
Presentation
2019Belt grinding of cast iron without cooling lubricant
Uhlmann, E.; Buelter, M.
Journal Article, Conference Paper
2019Best Practice Example 12. LEAN-Factory for a pharmaceutical Company in Berlin, Germany
Kohl, Holger; Jochem, Roland; Sieckmann, Felix; Rybski, Christoffer
Book Article
2019Bounded Collision Force by the Sobolev Norm: Compliance and Control for Interactive Robots
Haninger, Kevin; Surdilovic, Dragoljub
Conference Paper
2019Classification of Similar Objects of Different Sizes Using a Reference Object by Means of Convolutional Neural Networks
Lehr, Jan; Schlüter, Marian; Krüger, Jörg
Conference Paper
2019Cognitive Edge for Factory
Lambrecht, Jens; Steffens, Ernst Joachim; Geitz, Marc; Vick, Axel; Funk, Eugen; Steigerwald, Wolfgang
Conference Paper
2019Combining the Advantages of On- and Offline Industrial Robot Programming
Guhl, Jan; Nikoleizig, Sylvio; Heimann, Oliver; Hügle, Johannes; Krüger, Jörg
Conference Paper
2019CVD-Diamantwerkzeuge mit SiC-Zwischenschicht
Uhlmann, E.; Barth, E.; Gäbler, J.; Höfer, M.
Journal Article
2019Data preparation for data analytics (DPDA)
Stark, Rainer; Deuse, Jochen; Damerau, Thomas; Reckelkamm, Thorsten; Lindow, Kai
Journal Article
2019Data Preparation for Data Analytics (DPDA)
Reckelkamm, Thorsten; Damerau, Thomas
Journal Article
2019Datengetriebene Anwendungserstellung
Fraas, Philipp; Thierse, Paul; Chemnitz, Moritz
Book Article
2019Deep learning for part identification based on inherent features
Krüger, Jörg; Lehr, Jan; Schlüter, Marian; Bischoff, Nils
Journal Article
2019Development and operation of Digital Twins for technical systems and services
Stark, Rainer; Fresemann, Carina; Lindow, Kai
Journal Article
2019Development capabilities for smart products
Tomiyama, T.; Lutters, E.; Stark, R.; Abramovici, M.
Journal Article
2019Development of a Fire Detection Based on the Analysis of Video Data by Means of Convolutional Neural Networks
Lehr, Jan; Gerson, Christian; Ajami, Mohamad; Krüger, Jörg
Conference Paper
2019Development of a novel optical measurement technique to investigate the hot cracking susceptibility during laser beam welding
Bakir, N.; Pavlov, V.; Zavjalov, S.; Volvenko, S.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2019Development of an organizational structure model as a basis for the assessment of the digital transformation of organizations
Kidschun, F.; Hecklau, F.; Orth, R.; Wackernagel, J.P.; Singer, K.
Conference Paper
2019Digital Twin
Stark, Rainer; Damerau, Thomas
Book Article
2019Drei Zukunftsszenarien. Additive Fertigung im Jahr 2025 in Deutschland
Riemer, Annamaria; Döbel, Inga; Welz, Juliane; Knitsch, Valentin; Bergmann, André; Giebitz, Danny; Schüll, Elmar
Book
2019Ecological and functional optimization of the pretreatment process for plasma based coatings of cutting tools
Uhlmann, E.; Riemer, H.; An, S.; Fröhlich, M.; Paschke, H.; Petersen, M.
Journal Article, Conference Paper
2019Einfluss der Schärfparameter auf die Schleifscheibentopographie
Uhlmann, E.; Muthulingam, A.
Journal Article
2019Einsatzverhalten von CVD-Diamantdünnschichtwerkzeugen
Uhlmann, E.; Hinzmann, D.
Journal Article
2019Energieeffizienz in der intelligenten Fabrik
Thiele, G.; Grabowski, K.; Krüger, J.
Journal Article
2019Energy Efficiency Optimization using AutomationML modeling and an EnPI methodology
Thiele, Gregor; Khorsandi, Niloufar; Krüger, Jörg
Conference Paper
2019Entwicklung eines methodengestützten Vorgehensmodells für das Qualitätsmanagement Reporting (QMR)
Gruber, Tobias
: Krüger, Jörg; Jochem, Roland
Dissertation
2019Experimental and numerical assessment of weld pool behavior and final microstructure in wire feed laser beam welding with electromagnetic stirring
Meng, X.; Bachmann, M.; Artinov, A.; Rethmeier, M.
Journal Article
2019Fallbasierte Feinplanung im Rahmen der kurzfristigen Fertigungssteuerung
Arlt, Reinhard
: Jochem, Roland; Kohl, Holger; Specht, D.; Mertins, K.
Dissertation
2019Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik. Jahresbericht 2018/2019
 
Annual Report
2019From process to activity in the data flow
Lünnemann, Pascal; Riedelsheimer, Theresa; Wehking, Sebastian; Lindow, Kai
Journal Article
2019Gestaltungsrichtlinien für die Visualisierung von Produktinformationen in der virtuellen Umgebung CAVE zur Unterstützung von Design Review Teams
Brandenburg, Elisabeth
: Krüger, J.; Stark, Rainer; Thüring, M.
Dissertation
2019Heat treatment of SLM-LMD hybrid components
Uhlmann, Eckart; Düchting, Jan; Petrat, Torsten; Graf, Benjamin; Rethmeier, Michael
Conference Paper
2019Herausforderungen in der Mikrozerspanung
Kuche, Yves; Eckert, Udo
Presentation
2019Highspeed-Plasma-Laser-Cladding (HPLC) als hybrides Beschichtungsverfahren: Evaluierung des Einsatzpotentials für hohe Prozessgeschwindigkeiten
Brunner-Schwer, Christian; Schreiber, Frank; Graf, Benjamin; Rethmeier, Michael
Conference Paper
2019Highspeed-plasma-laser-cladding of thin wear resistance coatings: A process approach as a hybrid metal deposition-technology
Brunner-Schwer, Christian; Petrat, Torsten; Graf, Benjamin; Rethmeier, Michael
Journal Article
2019Hochleistungsbohrwerkzeuge für CFK
Uhlmann, E.; Christiansen, G.; Reimers, W.; Brömmelhoff, K.
Journal Article
2019Hybrid laser arc welding of thick plates X8Ni9 for LNG tank construction
Gook, Sergej; El-Batahgy, A-M.; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2019Improvement of filler wire dilution using external oscillating magnetic field at full penetration hybrid laser-arc welding of thick materials
Üstündag, Ömer; Avilov, Vjaceslav; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2019Improvement of numerical simulation model setup and calculation time in additive manufacturing-laser-metal-deposition components with an advanced modelling strategy
Biegler, Max; Khazan, Pavel; Gatzen, Marius; Rethmeier, Michael
Conference Paper
2019In-Situ-Kraftmessung bei variablen Werkzeugwinkeln
Uhlmann, Eckart; Uhlemann, Sebastian; Kochan, Jaroslaw
Journal Article
2019In-Situ-Kraftmessung bei variablen Werkzeugwinkeln
Uhlmann, Eckart; Uhlemann, Sebastian; Kochan, Jaroslaw
Journal Article
2019Increasing resource efficiency with an engineering decision support system for comparison of product design variants
Buchert, Tom; Ko, Nathanael; Graf, Roberta; Vollmer, Thomas; Alkhayat, Moritz; Brandenburg, Elisabeth; Stark, Rainer; Klocke, Fritz; Leistner, Philip; Schleifenbaum, Johannes Henrich
Journal Article
2019Increasing the productivity and quality of flute grinding processes through the use of layered grinding wheels
Uhlmann, E.; Schroer, N.; Muthulingam, A.; Gulzow, B.
Journal Article, Conference Paper
2019Integrating model checking and model based testing for industrial software development
Villani, E.; Pontes, R.P.; Coracini, G.K.; Ambrosio, A.M.
Journal Article
2019Integration of Active Pharmaceutical Ingredient production into a pharmaceutical Lean Learning Factory
Petrusch, N.; Sieckmann, F.; Menn, J.P.; Kohl, H.
Journal Article, Conference Paper
2019Interaction of tool and workpiece in ultrasonic-assisted grinding of high performance ceramics
Uhlmann, E.; Bruckhoff, J.
Journal Article, Conference Paper
2019Introducing Product Service System Architectures for realizing Circular Economy
Halstenberg, F.A.; Stark, R.
Journal Article
2019Investigation of liquid metal embrittlement of dual phase steel joints by electro-thermomechanical spot-welding simulation
Frei, Julian; Biegler, Max; Rethmeier, Michael; Böhne, Christoph; Meschut, Gerson
Journal Article
2019Investigation of the mechanical properties of single-pass hybrid laser-arc welded thick X120 pipeline steel plates
Üstündag, Ömer; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2019Künstliche Intelligenz zum Schutz sicherheitskritischer Energie-Infrastrukturen
Klein, M.; Thiele, G.; Krüger, J.
Journal Article
2019Laser Welding of SLM-Manufactured Tubes Made of IN625 and IN718
Jokisch, Torsten; Marko, Angelina; Gook, Sergej; Üstündag, Ömer; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2019Laserhybridschweißen von dickwandigen Stählen mit elektromagnetischer Schmelzbadunterstützung
Gumenyuk, Andrey; Üstündag, Ömer; Gook, Sergej; Rethmeier, Michael
Conference Paper
2019Lean-Methoden und ISO 9001:2015 - Geht das zusammen?
Kohl, Holger; Neumann, Konstantin
Journal Article
2019Leveraging circular economy through a methodology for smart service systems engineering
Halstenberg, F.A.; Lindow, K.; Stark, R.
Journal Article
2019Liquid Metal Embrittlement of Advanced High Strength Steels during Resistance Spot Welding
Frei, Julian
: Krüger, J.; Rethmeier, M.; Jüttner, S.
Dissertation
2019Low heat input gas metal arc welding for dissimilar metal weld overlays part III: Hydrogen-assisted cracking susceptibility
Frei, Julian; Alexandrov, Boian T.; Rethmeier, Michael
Journal Article
2019Mechanical properties characterization of resistance spot welded DP1000 steel under uniaxial tensile tests
Javaheri, E.; Pittner, A.; Graf, B.; Rethmeier, M.
Journal Article
2019Mechanical Properties of Single-pass Hybrid Laser Arc Welded 25 mm Thick-walled Structures Made of Fine-grained Structural Steel
Üstündag, Ömer; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article, Conference Paper
2019Merkmalbasiertes Nutzerunterstützungssystem für die Erfassung von Bauteilen mittels industrieller Computertomographie
Sawczyn, Nikolas
: Hilgenberg, K.; Uhlmann, Eckart; Karpuschewski, B.
Dissertation
2019Microstructure of Inconel 718 parts with constant mass energy input manufactured with direct energy deposition
Petrat, Torsten; Brunner-Schwer, Christian; Graf, Benjamin; Rethmeier, Michael
Journal Article, Conference Paper
2019Mikrostrukturierte CVD-Diamant-Werkzeuge
Bachmann, H.; Meier, P.; Uhlmann, E.; Schröter, D.
Journal Article
2019Modelling of Abrasive Water Jet Cutting with Controlled Depth for Near-Net-Shape Fabrication
Uhlmann, E.; Männel, C.
Journal Article, Conference Paper
2019Modelling of brushing processes
Sommerfeld, C.; Uhlmann, E.; Hoyer, A.
Conference Paper
2019Multi level network management - A method for managing inter-organizational innovation networks
Cap, J.-P.; Blaich, E.; Kohl, H.; Raesfeld, A. von; Harms, R.; Will, M.
Journal Article
2019Niobcarbid statt Wolframcarbid Alternativer Schneidstoff in der Drehbearbeitung
Kropidlowski, K.; Uhlmann, E.; Woydt, M.; Theiler, G.; Gradt, T.
Journal Article
2019Nonparametric Inverse Dynamic Models for Multimodal Interactive Robots
Haninger, Kevin; Tomizuka, Masayoshi
Report
2019Numerical and experimental investigation of thermo-fluid flow and element transport in electromagnetic stirring enhanced wire feed laser beam welding
Meng, X.; Artinov, A.; Bachmann, M.; Rethmeier, M.
Journal Article
2019Numerische Simulation einer AM-Prozesskette im DED Auftragschweißen
El-Sari, Bassel; Biegler, Max; Graf, Benjamin; Rethmeier, Michael
Conference Paper
2019On the search for the origin of the bulge effect in high power laser beam welding
Artinov, A.; Bakir, N.; Bachmann, M.; Gumenyuk, A.; Na, S.-J.; Rethmeier, M.
Journal Article
2019Ortsabhängiges Verschleißmodell für das Doppelseitenplanschleifen mit Planetenkinematik
List, Michael
: Rethmeier, M.; Uhlmann, E.; Klocke, F.
Dissertation
2019Point Pair Feature Matching: Evaluating Methods to Detect Simple Shapes
Ziegler, M.; Rudorfer, M.; Kroischke, X.; Krone, S.; Krüger, J.
Conference Paper
2019Prediction of the initial fatigue crack location of automatically welded tubular joints for jacket support structures
Schaumann, P.; Schürmann, K.; Pittner, A.; Rethmeier, M.
Conference Paper
2019A Process Model for Enhancing Digital Assistance in Knowledge-Based Maintenance
Kovacs, Klaudia; Ansari, Fazel; Geisert, Claudio; Uhlmann, E.; Glawar, Robert; Sihn, Wilfried
Conference Paper
2019Profilverschleißreduzierung beim Planschleifen
Lichtschlag, L.; Uhlmann, E.
Journal Article
2019Prototyping von Produkt-Service Systemen und Smart Services in der Konzeptphase des Entwicklungsprozesses
Exner, Konrad
: Jochem, Roland; Stark, Rainer; Meier, Horst
Dissertation
2019Qualitätskriterien für den Datenfluss im Advanced System Engineering
Müller, Helena; Riedelsheimer, Theresa; Lünnemann, Pascal; Blüher, Till; Stark, Rainer
Conference Paper
2019Reale Daten für Simulationen im digitalen Zwilling
Chemnitz, Moritz; Heimann, Oliver; Vick, A.
Journal Article
2019Reconfiguring machine tool behavior via smart building block systems
Uhlmann, E.; Peukert, B.
Journal Article, Conference Paper
2019Reifegradmodelle in der Produktentwicklung
Randermann, M.; Blüher, T.; Jochem, R.; Stark, R.
Journal Article
2019Requirements for a methodology for the analysis and assessment of technological capability in research and technology organizations
Hecklau, F.; Kidschun, F.; Kohl, H.; Tominaj, S.
Conference Paper
2019Resistance spot welding under external load for evaluation of LME susceptibility of zinc coated advanced high strength steel sheets
Frei, Julian; Biegler, Max; Rethmeier, Michael
Conference Paper
2019Safe rendering of high impedance on a series-elastic actuator with disturbance observer-based torque control
Haninger, Kevin; Asignacion, Agner; Oh, Sehoon
Report
2019Smart Cyber-Physical System applications in production and logistics: Special issue editorial
Ilie-Zudor, E.; Preuveneers, D.; Ekárt, A.; Hohwieler, E.
Journal Article
2019Smart Industrial Products - Smarte Produkte und ihr Einfluss auf Geschäftsmodelle, Zusammenarbeit, Portfolios und Infrastrukturen
Lünnemann, Pascal; Wang, Wei Min; Lindow, Kai
: Müller, Patrick (Hrsg.); Lindow, Kai (Hrsg.); Gregorzik, Stefan (Hrsg.); Stark, Rainer (Hrsg.)
Study
2019Study on the feasibility of modelling notations for integrated Product-Service Systems Engineering
Halstenberg, F.A.; Stark, R.
Journal Article, Conference Paper
2019Sustainability Reporting in German Manufacturing SMEs
Steinhöfel, Erik; Galeitzke, Mila; Kohl, Holger; Orth, Ronald
Journal Article, Conference Paper
2019Symbiotic human-robot collaborative assembly
Wang, L.; Gao, R.; Vancza, J.; Krüger, J.; Wang, X.V.; Makris, S.; Chryssolouris, G.
Journal Article
2019System zur wenigstens bereichsweisen Regelung einer Temperatur eines Industrieroboters und Verfahren zum Erhöhen der Arbeitsgenauigkeit eines Industrieroboters
Uhlmann, Eckart; Reinkober, Sascha; Lenz, Frederik
Patent
2019Systematische Methodenanwendung im dynamischen Qualitätsmanagement bei KMU
Schober, Johannes
: Krüger, Jörg; Jochem, Roland
Dissertation
2019Thermal and technological aspects of double face grinding of Al2O3 ceramic materials
Deja, M.; List, M.; Lichtschlag, L.; Uhlmann, E.
Journal Article
2019Tool wear modelling using micro tool diameter reduction for micro-end-milling of tool steel H13
Manso, C.S.; Thom, S.; Uhlmann, E.; Assis, C.L.F de; Conte, E.G del
Journal Article
2019Towards Learning 3d Object Detection and 6d Pose Estimation from Synthetic Data
Rudorfer, M.; Neumann, L.; Krüger, J.
Conference Paper
2019Use of Digital Twins in Additive Manufacturing Development and Production
Bergmann, André; Lindow, Kai
Abstract
2019Variable-Latency Networked P-PI and MPC Controller Performance for Industrial Robots
Vick, Axel; Kilinc, Ali; Guhl, Jan
Conference Paper
2019Verbundprojekt SmartStream: Intelligente Bearbeitung durch die Verwendung schaltbarer Fluide
Schmiedel, C.; Bierwisch, C.; Uhlmann, E.; Menzel, P.; Mohseni-Mofidi, S.; Breinlinger, T.; Nutto, C.
Conference Paper
2019Verfahren zur kamerabasierten Instrumentennavigation am Beispiel der HNO-Chirurgie
Katanacho, Manuel
: Krüger, Jörg; Uhlmann, Eckart; Wittenberg, Thomas
Dissertation
2019Vermeidung von Schweißimperfektionen im Überlappbereich bei laserstrahlhybrid-geschweißten Rundnähten
Gook, Sergej; Üstündag, Ömer; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2019Vernetzte Transportroboter in der Fabriklogistik
Chemnitz, Moritz; Vick, Axel
Journal Article
2019What dynamics should impedance-controlled robots render?
Haninger, Kevin; Surdilovic, Dragoljub; Bastidas Cruz, Arturo
Conference Paper
2019Zusammenfassung und Ausblick
Chemnitz, Moritz
Book Article
20183D laser metal deposition: Process steps for additive manufacturing
Graf, Benjamin; Marko, Angelina; Petrat, Torsten; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
20183D-Vorkonturierung mittels Wasserabrasivstrahl
Uhlmann, E.; Männel, C.
Journal Article
2018Affordance Based Approach to Automatic Program Generation for Industrial Robots in Manufacturing
Heimann, Oliver; Krüger, Jörg
Journal Article, Conference Paper
2018Anwendungsfälle
Kind, Simon; Rehfeld, Ingolf; Schmidt, Jonas; Geiger, Andreas; Kirsch, Lukas
Book Article
2018Anwendungsszenario und Evaluierung des ViB-SHP-Ansatzes
Blume, Claas; Kind, Simon; Lünnemann, Pascal
Book Article
2018Application of additive manufactured tungsten carbide tool electrodes in EDM
Uhlmann, Eckart; Bergmann, André; Bolz, Robert; Gridin, Witalij
Journal Article, Conference Paper
2018Application of Micro Structured, Boron Doped CVD-diamond as μEDM Tool Electrodes
Uhlmann, Eckart; Oberschmidt, Dirk; Bolz, Robert
Journal Article, Conference Paper
2018Artefaktkorrektur für die Computertomographie
Uhlmann, Eckart; Polte, Julian; Melnik, Steffen
Journal Article
2018Assessing the predictive capability of numerical additive manufacturing simulations via in-situ distortion measurements on a LMD component during build-up
Biegler, Max; Graf, Benjamin; Rethmeier, Michael
Journal Article, Conference Paper
2018Assistenzbasierte virtuelle 2,5-D-Rekonstruktion von Kulturgut
Schneider, Jan; Nickolay, Bertram
Journal Article
2018Aufbau von VR Trainingsumgebungen aus Daten der Virtuellen Produktentstehung
Geiger, Andreas; Stark, Rainer
Journal Article
2018Augmented Reality im Qualitätsmanagement in der Produktentstehung - Chancen und Risiken durch den Wandel der Industrie 4.0
Heinze, Adrian
Master Thesis
2018Automatic detection of field-grown cucumbers for robotic harvesting
Fernández, R.; Montes, H.; Surdilovic, J.; Surdilovic, D.; Gonzalez-De-Santos, P.; Armada, M.
Journal Article
2018Automatisierte Fertigung von Hohlprofilknoten für Jacket-Gründungsstrukturen
Schaumann, P.; Rethmeier, M.; Schürmann, K.; Pittner, A.; Dänekas, C.; Schippereit, C.
Journal Article
2018Beam Hardening Correction Using Cone Beam Consistency Conditions
Abdurahman, S.; Frysch, R.; Bismark, R.; Melnik, S.; Beuing, O.; Rose, G.
Journal Article
2018Benchmarking-unterstützte Standortplanung von industriellen Wertschöpfungsprozessen
Zhou, Xing
: Kohl, Holger
Dissertation
2018Benötigte neue Jobrollen/Engineering Disziplinen
Lünnemann, Pascal
Book Article
2018Boron-doped CVD diamond micro-end mills for machining titanium
Uhlmann, Eckart; Polte, Mitchel; Polte, Julian; Oberschmidt, Dirk
Conference Paper
2018Build-up strategies for additive manufacturing of three dimensional Ti-6Al-4V-parts produced by laser metal deposition
Spranger, Felix; Graf, Benjamin; Schuch, Michael; Hilgenberg, Kai; Rethmeier, Michael
Journal Article
2018Build-up strategies for laser metal deposition in additive manufacturing
Petrat, Torsten; Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2018Build-up strategies for temperature control using laser metal deposition for additive manufacturing
Petrat, Torsten; Winterkorn, René; Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2018Building the ENRICH Community - Common European Network as Advantage for ENRICH in Brazil, China and in the USA
Haunschild, Johanna; Orth, Ronald; Pereira Ferreira, Romulo
Conference Paper
2018Camera-based instrument navigation in ENT-surgery
Katanacho, Manuel; Uhlmann, Eckart
Conference Paper
2018CareJack - die intelligente Softorthese zur Ergonomieunterstützung
Kuschan, Jan; Schmidt, Henning; Krüger, Jörg
Journal Article
2018Cloud-based active disturbance rejection control for industrial robots
Briese, Clemens; Vick, Axel; Krüger, Jörg
Conference Paper
2018Cluster identification of sensor data for predictive maintenance in a Selective Laser Melting machine tool
Uhlmann, E.; Pastl Pontes, R.; Geisert, C.; Hohwieler, E.
Journal Article, Conference Paper
2018Comparison between GTA and laser beam welding of 9% Ni steel for critical cryogenic applications
El-Batahgy, A-M.; Gumenyuk, A.; Gook, S.; Rethmeier, M.
Journal Article
2018Concept and architecture for programming industrial robots using augmented reality with mobile devices like microsoft HoloLens
Guhl, J.; Nguyen, S.T.; Kruger, J.
Conference Paper
2018Concept of sustainable data for a selective laser melting machine
Uhlmann, Eckart; Pastl Pontes, Rodrigo; Laghmouchi, Abdelhakim; Bergmann, André
Journal Article, Conference Paper
2018Corporate Governance: The Evaluation Based Approach to the Governance and Business Models of the EPIC Centre of Excellence in Production Informatics and Control (EPIC Coe)
Monostori, Laszlo; Kadar, Botond; Nick, Gabor; Pfeiffer, Andras; Vargedo, Tamas; Hecklau, Fabian
Conference Paper
2018Correction to: Execution and evaluation of enterprise models in IEM/MO2GO based on Petri net
Jin, G.; Jäkel, F.-W.
Journal Article
2018Das cyberphysische Produktmodell
Lünnemann, Pascal; Kirsch, Lucas
Book Article
2018Data-driven business model a methodology to develop smart services
Exner, K.; Stark, R.; Kim, J.Y.
Conference Paper
2018Design of neural network arc sensor for gap width detection in automated narrow gap GMAW
Fabry, C.; Pittner, A.; Rethmeier, M.
Journal Article
2018Design Simulation of Components made from Diamond-Ceramic Composites for Deep-Sea Mining
Uhlmann, Eckart; Uhlemann, Sebastian; Borsoi Klein, Tiago; Schmiedel, Christian
Poster
2018Developing Regional Intellectual Capital through Future Workshops. A Case Study from Germany
Orth, Ronald; Federwisch, Tobias; Jordan, Kristina
Conference Paper
2018Development of a Methodology to Develop Venture Capital Strategies in Applied R&D Networks
Cap, Jan-Patrick
Conference Paper
2018Diamond burnishing for mould and die industry
Uhlmann, Eckart; Oberschmidt, Dirk; Guhde, Sebastian; Polte, Mitchel; Polte, Julian
Conference Paper
2018Dienstebasierte Integration objektspezifischer Lageerkennungsalgorithmen am Beispiel eines roboterbasierten Greifszenarios
Rudorfer, Martin; Chemnitz, Moritz
Book Article
2018Digitale Zwillinge - Entwicklungen im Maschinenbau
Stark, Rainer; Halstenberg, Friedrich A.
Journal Article
2018Distributed Industrial Robot Control using Environment Perception and Parallel Path Planning Cloud Services
Wassermann, Jonas; Vonasek, Vojtech; Vick, Axel
Conference Paper
2018Distributed Motion Planning for Industrial Random Bin Picking
Vonasek, Vojtech; Vick, Axel; Krüger, Jörg
Journal Article, Conference Paper
2018Ductile machining of brittle materials for manufacturing micro-optic components
Uhlmann, Eckart; Oberschmidt, Dirk; Rolon, D.A.; Kühne, S.; Jagodzinski, M.; Malcher, M.
Conference Paper
2018Dynamic Analysis of Abrasive Filaments in Contact with Different Workpiece Geometries
Uhlmann, E.; Sommerfeld, C.
Journal Article
2018Effect of laser-beam and hybrid-laser-arc welding parameters and filler metal on microstructure and mechanical properties of thick heat-treated steel X8Ni9+QT640 for cryogenic service
El-Batahgy, A-M.; Gook, S.; Gumenyuk, A.; Rethmeier, M.
Conference Paper
2018The Effects of Laser Microtexturing of Biomedical Grade 5 Ti-6Al-4V Dental Implants (Abutment) on Biofilm Formation
Uhlmann, Eckart; Schweitzer, Luiz; Kieburg, Heinz; Spielvogel, Anja; Huth-Herms, Katrin
Journal Article, Conference Paper
2018An Efficiency-Oriented Batch Reduction Procedure for Hazardous Material
Halstenberg, Friedrich A.; Chen, Eleanor Y.; Rumpel, Guido; Schneider, Ralph; Stark, Rainer
Journal Article, Conference Paper
2018Einsatzverhalten und Leistungsbedarfe unterschiedlicher Kühlungsmethoden beim Außen-Längs-Runddrehen
Fürstmann, Paul
: Krüger, J.; Uhlmann, Eckart; Klocke, F.
Dissertation
2018Electro-discharge drilling with MP-based carbon fibre electrodes
Uhlmann, Eckart; Perfilov, Ivan; Yabroudi, S.; Schweitzer, Luiz; Polte, Mitchel
Conference Paper
2018Embedding electronics into additive manufactured components using laser metal deposition and selective laser melting
Petrat, Torsten; Kersting, Robert; Graf, Benjamin; Rethmeier, Michael
Journal Article, Conference Paper
2018Enabling Human-Robot-Interaction via Virtual and Augmented Reality in Distributed Control Systems
Guhl, Jan; Hügle, Johannes; Krüger, Jörg
Journal Article, Conference Paper
2018Endkonturnahe Schruppbearbeitung von Titanaluminid mittels Wasserabrasivstrahlen mit kontrollierter Schnitttiefe
Faltin, Fabian
: Kohl, Holger; Uhlmann, E.; Abele, E.
Dissertation
2018EnerSEC. Reaktive IT-Sicherheitsüberwachung automatisierter technischer Anlagen in sicherheitskritischen Energie-Infrastrukturen
Klein, Max; Thiele, Gregor; Horn, Christian; Krüger, Jörg
Poster
2018Engineering activities: Considering value creation from a holistic perspective
Lünnemann, P.; Stark, R.; Wang, W.M.; Manteca, P.I.
Conference Paper
2018ENRICH - European Network of Research and Innovation Centres and Hubs
Orth, Ronald; Haunschild, Johanna
Poster
2018ENRICH Community Building - Development of a Decision Support Tool for Membership Selection
Haunschild, Johanna; Kreiling, Laura
Conference Paper
2018Enterprise Interoperability
: Zelm, Martin (Ed.); Jaekel, Frank-Walter (Ed.); Doumeingts, Guy (Ed.); Wollschlaeger, Martin (Ed.)
Conference Proceedings
2018Enterprise interoperability management and artifacts
Jäkel, Frank-Walter
Conference Paper
2018Entwicklung eines hochauflösenden wellenlängendispersiven Spektrometers für den Spektralbereich harter Röntgenstrahlung
Holfelder, Ina
: Oberschmidt, D.; Uhlmann, Eckart; Beckhoff, B.
Dissertation
2018Entwicklung eines methodenbasierten Modells zur Messung und Bewertung der Produktivität von Dienstleistungsprozessen
Amini, Ahmad Schafiq
: Krüger, J.; Jochem, R.; Woll, R.; Herrmann, J.
Dissertation
2018Entwicklung eines Validierungsframeworks zur erlebbaren Absicherung von Fahrerassistenzsystemen
Auricht, Maik
: Göhlich, D.; Stark, Rainer; Bernasch, J.
Dissertation
2018Entwicklung und Aufbau eines Probenhalters für die Emissionsgradmessung an semitransparenten Materialien
Gieseler, J.; Monte, C.; Adibekyan, A.; Hollandt, J.; Kersting, R.
Journal Article
2018Equivalent heat source approach in a 3D transient heat transfer simulation of full-penetration high power laser beam welding of thick metal plates
Artinov, A.; Bachmann, M.; Rethmeier, M.
Journal Article
2018Erhöhung der Genauigkeit beim Fräsen mit Industrierobotern
Uhlmann, E.; Reinkober, S.; Hollerbach, T.
Journal Article
2018Erhöhung der Genauigkeit beim Fräsen mit Industrierobotern durch abtriebsseitige Winkelmesssysteme
Uhlmann, Eckart; Reinkober, Sascha; Hollerbach, Tobias
Journal Article
2018Evaluation Model for the Derivation of a Sustainable Digitisation Strategy
Knothe, T.; Oertwig, N.; Obenaus, M.; Butschek, P.
Conference Paper
2018Evaluation of Business Models - A Systematic Literature Review
Steinhöfel, Erik; Hussinki, Henri; Bornemann, Manfred
Conference Paper
2018Evaluierung
Blume, Claas; Lünnemann, Pascal
Book Article
2018Execution and evaluation of enterprise models in IEM/MO2GO based on Petri net
Jin, Guangying; Jäkel, Frank-Walter
Journal Article
2018Facts & Figures: Get to know Brazil and its innovative Industries
Haunschild, Johanna; Pereira Ferreira, Romulo; Tsog, Sara
Report
2018Facts & Figures: Get to know the European Union and its Innovative Industries
Haunschild, Johanna; Pereira Ferreira, Romulo
Report
2018Fatos & Figuras: Conheça a União Europeia e suas indústrias inovadoras
Haunschild, Johanna; Pereira Ferreira, Romulo
Report
2018Feedback to Design with Digital Lifecycle-Twins - literature review and concept presentation
Riedelsheimer, Theresa; Lindow, Kai; Stark, Rainer
Conference Paper
2018Feinbohrspindel für die Trockenfunkenerosion
Uhlmann, Eckart; Yabroudi, S.; Polte, Mitchel
Journal Article
2018Finishbearbeitung technischer Oberflächen aus gehärtetem Stahl unter Verwendung von Rundbürsten mit Schleiffilamenten
Hochschild, Leif
: Kraft, Marc; Uhlmann, Eckart; Klocke, Fritz
Dissertation
2018Finite element analysis of in-situ distortion and bulging for an arbitrarily curved additive manufacturing directed energy deposition geometry
Biegler, Max; Marko, Angelina; Graf, Benjamin; Rethmeier, Michael
Journal Article
2018The four-step approach for the creation of the HR Concept for the EPIC Centre of Excellence in Production Informatics and Control (EPIC CoE)
Hecklau, Fabian; Orth, Ronald; Kidschun, Florian; Nick, Gabor
Conference Paper
2018Fräsbearbeitung von Nickelbasislegierungen mit Industrierobotern.
Reinkober, Sascha
: Uhlmann, Eckart
Dissertation
2018Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik. Jahresbericht 2017/2018
 
Annual Report
2018Full penetration hybrid laser arc welding of up to 28 mm thick S355 plates using electromagnetic weld pool support
Üstündag, Ömer; Avilov, Vjaceslav; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2018Futur 3.2018
: Uhlmann, Eckart
Journal Issue
2018Ganzheitliche Planung der Qualitätsorganisation in produzierenden Unternehmen
Behmer, Falk Johannes
: Krüger, J.; Jochem, Roland; Woll, R.
Dissertation
2018Ganzheitliche Produktionssysteme in der Pharmaindustrie
Sieckmann, F.; Helm, R.; Kohl, H.; Wissel, S.
Journal Article
2018Gestaltungsaspekte immersiver Fahrsimulationsumgebungen
Reich, Diana
: Stark, Rainer
Dissertation
2018Gesture based robot programming using process knowledge
Heimann, O.; Hügle, J.; Krüger, J.
Conference Paper
2018Grinding of high performance materials with spherical mounted points
Koprowski, Stefan
: Kohl, H.; Uhlmann, Eckart; Weingaertner, W.L.
Dissertation
2018Hand Shape Recognition Using Very Deep Convolutional Neural Networks
Rakowski, Alexander; Wandzik, Lukasz
Conference Paper
2018Hard material small-batch industrial machining robot
Brunete, A.; Gambao, E.; Koskinen, J.; Heikkilä, T.; Kaldestad, K.B.; Tyapin, I.; Hovland, G.; Surdilovic, D.; Hernando, M.; Bottero, A.; Anton, S.
Journal Article
2018Helical electrodes for improved flushing conditions in drilling EDM of MAR-M247
Uhlmann, Eckart; Perfilov, Ivan; Yabroudi, S.; Schweitzer, Luiz; Polte, Mitchel
Conference Paper
2018Heutige Defizite industrieller Anwendung
Lünnemann, Pascal
Book Article
2018Hochleistungskeramik effizienter schleifen
Borsoi Klein, Tiago; Korpowski, Stefan
Journal Article
2018Holo Pick'n'Place
Rudorfer, M.; Guhl, J.; Hoffmann, P.; Krüger, J.
Conference Paper
2018Human robot collaboration - using kinect v2 for ISO/TS 15066 speed and separation monitoring
Rosenstrauch, Martin J.; Pannen, Tessa J.; Krüger, Jörg
Journal Article, Conference Paper
2018Hybrid laser arc welding of 25 mm thick materials using electromagnetic weld pool support
Üstündag, Ömer; Avilov, Vjaceslav; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2018Hybrid laser-arc welding of thick-walled ferromagnetic steels with electromagnetic weld pool support
Üstündag, Ömer; Fritzsche, André; Avilov, Vjaceslav; Rethmeier, Michael; Gumenyuk, Andrey
Journal Article
2018Hybrid Prototype-in-the-Loop
Buchholz, Christian; Kind, Simon; Blume, Claas; Enin, Alexey; Stark, Rainer
Journal Article
2018Hybrid prototype-in-the-loop
Buchholz, C.; Kind, S.; Blume, C.; Enin, A.; Stark, R.
Journal Article
2018Hybrides Auftragschweißen: Potentiale des laserunterstützten Plasma-Pulver-Auftragschweißens (PTA)
Brunner-Schwer, Christian; Graf, Benjamin; Rethmeier, Michael; Schreiber, Frank
Conference Paper
2018Identification of Human Dynamics in User-Led Physical Human Robot Environment Interaction
Haninger, Kevin; Surdilovic, Dragoljub
Conference Paper
2018Implementation of lean production systems in small and medium-sized pharmaceutical enterprises
Sieckmann, Felix; Ngoc, Hien Nguyen; Helm, René; Kohl, Holger
Journal Article, Conference Paper
2018Improved degassing in laser beam welding of aluminum die casting by an electromagnetic field
Fritzsche, A.; Hilgenberg, K.; Teichmann, F.; Pries, H.; Dilger, K.; Rethmeier, M.
Journal Article
2018Improvement of Defect Detectability in Machine Tools Using Sensor-based Condition Monitoring Applications
Demilia, G.; Gaspari, A.; Hohwieler, E.; Laghmouchi, A.; Uhlmann, E.
Journal Article, Conference Paper
2018In-process quality assurance for selective laser melting through online generation of key performance indicators in context of industrie 4.0
Pastl Pontes, Rodrigo; Uhlmann, Eckart
Book Article
2018In-situ distortions in LMD additive manufacturing walls can be measured with digital image correlation and predicted using numerical simulations
Biegler, Max; Graf, Benjamin; Rethmeier, Michael
Journal Article
2018Industrial Image Processing Applications as Orchestration of Web Services
Rudorfer, M.; Krüger, J.
Journal Article, Conference Paper
2018Industrielle Netzwerkanwendungen in der Virtuellen Produktentstehung
Stark, Rainer; Riedelsheimer, Theresa
Journal Article
2018Industry 4.0 as enabler for a sustainable development
Stock, Tim; Obenaus, Michael; Kunz, Sascha; Kohl, Holger
Journal Article
2018Influence of cutting edge micro-geometry in micro-milling of copper alloys with reduced lead content
Uhlmann, Eckart; Kuche, Yves; Polte, Julian; Polte, Mitchel
Journal Article, Conference Paper
2018Influence of heat input and preheating on the cooling rate, microstructure and mechanical properties at the hybrid laser-arc welding of API 5L X80 steel
Turichin, G.; Kuznetsov, M.; Pozdnyakov, A.; Gook, S.; Gumenyuk, A.; Rethmeier, M.
Journal Article, Conference Paper
2018Influence of tilt and lead angles on 5-axis grinding with spherical mounted points
Koprowski, S.; Uhlmann, E.; Weingaertner, W.
Journal Article
2018International Innovation Partnerships by ENRICH in Brazil
Will, Markus; Haunschild, Johanna
Presentation
2018Intuitive robot programming through environment perception, augmented reality simulation and automated program verification
Wassermann, Jonas; Vick, Axel; Krüger, Jörg
Journal Article, Conference Paper
2018Intuitive Roboterprogrammierung per Fingerzeig
Heimann, Oliver; Hügle, Johannes
Journal Article
2018Investigating challenges of a sustainable use of marine mineral resources
Kaluza, Andrea; Lindow, Kai; Stark, Rainer
Journal Article, Conference Paper
2018Investigation of solidification cracking susceptibility during laser beam welding using an in-situ observation technique
Bakir, N.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2018IT-basiertes Werkzeug zur Datenflussanalyse im Entwicklungsumfeld
Riedelsheimer, Theresa; Lünnemann, Pascal; Wehking, Sebastian; Lindow, Kai
Journal Article
2018IT-Systemarchitektur
Lünnemann, Pascal; Kirsch, Lucas; Kind, Simon; Becker, Waldemar; Könnecke, Konstantin; Zuchold, Jörg-Uwe
Book Article
2018Knowledge in engineering design
Preidel, Maurice; Wang, Wei Min; Exner, Konrad; Stark, Rainer
Conference Paper
2018Konstruktive Maßnahmen zur Reduzierung des thermischen Einflusses auf die Genauigkeit von Industrierobotern
Reinkober, Sascha; Mohnke, Christian
Journal Article
2018Laser beam oscillation welding for automotive applications
Müller, A.; Goecke, S.F.; Rethmeier, M.
Journal Article
2018Laser-plasma-cladding as a hybrid metal deposition-technology applying a SLM-produced copper plasma nozzle
Brunner-Schwer, Christian; Kersting, Robert; Graf, Benjamin; Rethmeier, Michael
Journal Article, Conference Paper
2018Laser-Pulver-Auftragschweißen in der additiven Prozesskette für Legierungen aus dem Turbomaschinenbau
Graf, Benjamin
: Uhlmann, E.; Rethmeier, Michael; Schmidt, M.
Dissertation
2018Learning Factory for Industry 4.0 to provide future skills beyond technical training
Schallock, Burkhard; Rybski, Christoffer; Jochem, Roland; Kohl, Holger
Journal Article, Conference Paper
2018Learning process planning for special machinery assembly
Menn, Jan-Philipp; Sieckmann, Felix; Kohl, Holger; Seliger, Günther
Journal Article, Conference Paper
2018Learnstruments: Learning-conducive artefacts to foster learning productivity in production engineering
Menn, Jan-Philipp; Muschard, Bernd; Schumacher, Bastian; Sieckmann, Felix; Kohl, Holger; Seliger, Günther
Journal Article
2018Leichtbau für Triebwerke - Bearbeitung von Ceramic Matrix Composites
Borsoi Klein, Tiago
Journal Article
2018Low heat input gas metal arc welding for dissimilar metal weld overlays part II: The transition zone
Frei, Julian; Alexandrov, Boian T.; Rethmeier, Michael
Journal Article
2018Machine Tool and Technology for Manufacturing of Micro-structures by Micro Dry Electrical Discharge Milling
Uhlmann, E.; Perfilov, I.
Journal Article, Conference Paper
2018Manufacturing and replication of sub-10 μm micro-bowls for biomedical sensor systems
Uhlmann, Eckart; Hein, Christoph; Polte, Mitchel; Polte, Julian; Dähne, L.
Conference Paper
2018Manufacturing of carbide tools by Selective Laser Melting
Uhlmann, Eckart; Bergmann, André; Bolz, Robert
Journal Article, Conference Paper
2018Maximization of operational workspace of a mobile manipulator system
Kalidindi, V.V.; Vick, A.; Krüger, J.
Conference Paper
2018Methode zur Bestimmung spezifischer Kräfte durch Fräsversuche und Anwendung bei der Natursteinbearbeitung
Manthei, Marcel
: Kohl, H.; Uhlmann, Eckart; Denkena, B.
Dissertation
2018Methodik zur integrierten virtuellen Auslegung und Absicherung flexibler Bauteile
Hofheinz, Nicolas
: Rethmeier, Michael; Stark, Rainer; Wartzack, Sandro; Schwenk, C.
Dissertation
2018Methodology for the in-process evaluation of software-based process failures in Selective Laser Melting machine tools
Pastl Pontes, Rodrigo
: Krüger, Jörg; Uhlmann, Eckart; Gomes, Oliveira
Dissertation
2018Micro formed holographic security features in steel
Uhlmann, Eckart; Schulze, Stephanie; Polte, Julian; Hein, Christoph; Matthiesen, Johannes; Böge, Manfred
Conference Paper
2018Mikrobohren ohne flüssige Dielektrika
Uhlmann, Eckart; Yabroudi, S.; Polte, Mitchel
Journal Article
2018Mikrofräswerkzeuge mit Schneiden aus cBN
Uhlmann, E.; Polte, J.; Polte, M.; Kuche, Y.; Wiesner, H.
Journal Article
2018Model based, modular configuration of cyber physical systems for the information management on shop-floor
Jaekel, F.-W.; Torka, J.; Eppelein, M.; Schliephack, W.; Knothe, T.
Conference Paper
2018Möglichkeiten der Bildverarbeitung für Additive Manufacturing Reparaturen
Schlüter, Marian
Presentation
2018Morphing Detection Using a General-Purpose Face Recognition System
Wandzik, Lukasz; Kaeding, Gerald; Vicente-Garcia, Raul
Conference Paper
2018Motion planning with motion primitives for industrial bin picking
Vonasek, V.; Vick, A.; Saska, M.
Conference Paper
2018Multimodal Environment Dynamics for Interactive Robots
Haninger, Kevin; Surdilovic, Dragoljub
Conference Paper
2018Neues Elektrodenkonzept verbessert Senkerodieren
Streckenbach, Jan; Uhlmann, Eckart; Wolf, Cora-Sophia; Börnstein, Julian; Polte, Mitchel
Journal Article
2018Novel metrology to determine the critical strain conditions required for solidification cracking during laser welding of thin sheets
Bakir, N.; Pavlov, V.; Zavjalov, S.; Volvenko, S.; Gumenyuk, A.; Rethmeier, M.
Journal Article, Conference Paper
2018Numerical simulation of the weld pool dynamics during pulsed laser welding using adapted heat source models
Lange, F.; Artinov, A.; Bachmann, M.; Rethmeier, M.; Hilgenberg, K.
Journal Article, Conference Paper
2018Numerical simulation on the origin of solidification cracking in laser welded thick-walled structures
Bakir, N.; Artinov, A.; Gumenyuk, A.; Bachmann, M.; Rethmeier, M.
Journal Article
2018Numerische Prozesssimulation zur Auslegung des Druckfließläppens am Beispiel additiv gefertigter Bauteile
Schmiedel, Christian
: Rethmeier, Michael; Uhlmann, Eckart; Abele, Eberhard
Dissertation
2018Optimization with the evolution strategy by example of electrical-discharge drilling
Streckenbach, J.; Santibáñez Koref, I.; Rechenberg, I.; Uhlmann, E.
Conference Paper
2018Optimized data integration for tracelinking in product development through the application of semantic web technologies
Woll, Robert
: Stark, Rainer
Dissertation
2018Orbital hybrid laser arc welding using a high power fibre laser for pipeline construction
Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2018Perspectives for International Engineering Education
Stock, Tim; Kohl, Holger
Journal Article, Conference Paper
2018PKD-Glattdrückwerkzeuge für den Werkzeug- und Formenbau
Uhlmann, Eckart; Polte, Mitchel; Polte, Julian; Guhde, Sebastian; Kuche, Yves; Kappel, Thomas
Journal Article
2018Porosity of LMD manufactured parts analyzed by Archmimedes method and CT
Marko, Angelina; Raute, Julius; Linaschke, Dorit; Graf, Benjamin; Rethmeier, Michael
Journal Article
2018Potentials and limitations of simulation based artefact correction in computed tomography
Uhlmann, Eckart; Polte, Julian; Melnik, Steffen
Conference Paper
2018PowerGrasp: Concept for a novel Soft-Robotic Arm Support System
Kuschan, Jan; Goppold, Jean-Paul; Schmidt, Henning; Krüger, Jörg
Conference Paper
2018Präzise gestenbasierte Roboterprogrammierung
Heimann, Oliver; Hügle, Johannes; Krüger, Jörg
Book Article
2018Prognose der Oberflächenbeschaffenheit für die additive Fertigung mittels Laser-Pulver-Auftragschweißen
Marko, Angelina; Petrat, Torsten; Graf, Benjamin; Rethmeier, Michael
Conference Paper
2018A PSS maturity self-assessment tool
Exner, Konrad; Balder, Juliane; Stark, Rainer
Journal Article, Conference Paper
2018Qualitätsmanagement in der Automobilindustrie und dessen Umsetzung an Produktionsstandorten in der Volksrepublik China unter Berücksichtigung kultur- und kooperationsbedingter Einflüsse
Linthe, Oliver
: Krüger, J.; Jochem, R.; Woll, R.
Dissertation
2018Quantification and compensation of systematic errors in pressure measurements applied to oil pipelines
Thiele, Gregor; Liu, Martin; Chemnitz, Moritz; Krüger, Jörg
Conference Paper
2018Registration of pre- and postoperative surface scans for pediatric neurosurgery
Katanacho, Manuel; Lack, John-Certus; Fehlhaber, Felix; Krüger, Jörg
Journal Article
2018Robust Passivity and Passivity Relaxation for Impedance Control of Flexible-Joint Robots with Inner-Loop Torque Control
Haninger, Kevin; Tomizuka, Masayoshi
Journal Article
2018Safe human robot collaboration - Operation area segmentation for dynamic adjustable distance monitoring
Rosenstrauch, Martin J.; Krüger, Jörg
Conference Paper
2018Shop floor management systems in case of increasing process variation
Schliephack, Wolf
Conference Paper
2018Smart Service Lebenszyklus
Exner, Konrad; Blüher, Till; Stark, Rainer
Journal Article
2018SmartSensX. Ein Konzept für vernetzte tragbare Sensoren zur Anwendung in der Softrobotik und Mensch Maschine Interaktion
Hackbart, R.; Kostelnik, J.; Kuschan, Jan; Schmidt, Henning; Krüger, Jörg; Vieroth, R.; Lang, K.-D.
Conference Paper
2018Smoothed Particle Hydrodynamics simulation of the machining process of Inconel 718
Uhlmann, E.; Barth, E.
Journal Article, Conference Paper
2018Spannutschleifen von Hartmetall-Schaftwerkzeugen mit gradierten Schleifscheiben
Schröer, Nikolas
: Meyer, H.J.; Uhlmann, Eckart; Biermann, Dirk
Dissertation
2018State of the Art Literature Analysis of Innovation Network Management Frameworks
Cap, Jan-Patrick
Conference Paper
2018Strain-rate controlled Gleeble experiments to determine the stress-strain behavior of HSLA steel S960QL
Neubert, S.; Pittner, A.; Rethmeier, M.
Journal Article
2018Strömungsschleifen von Turbinenschaufeln
Schmiedel, Christian
Journal Article
2018Study of gap and misalignment tolerances at hybrid laser arc welding of thick-walled steel with electromagnetic weld pool support system
Üstündag, Ömer; Fritzsche, André; Avilov, Vjaceslav; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article, Conference Paper
2018A study on shielded metal arc welding of 9%Ni steel using non-conventional ferritic welding electrode for LNG facilities
Siayah, A.; El-Batahgy, A-M.; Khafagi, S.; Gumenyuk, A.; Gook, S.; Rethmeier, M.
Conference Paper
2018Study on sustainability developments in industrial practice
Lindow, Kai; Kaluza, Andrea; Stark, Rainer
Journal Article, Conference Paper
2018Study on the role of recondensation flux in high power laser welding by computational fluid dynamics simulations
Muhammad, S.; Han, S.-W.; Na, S.-J.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2018Susceptibility of electrolytically galvanized dual-phase steel sheets to liquid metal embrittlement during resistance spot welding
Frei, Julian; Rethmeier, Michael
Journal Article
2018Sustainable Innovation in a Multi-University Master Course
Gladysz, Bartlomiej; Urgo, Marcello; Gaspari, Lorenzo; Pozzan, Giovanna; Stock, Tim; Haskins, Cecilia; Jarzebowska, Elzbieta; Kohl, Holger
Journal Article, Conference Paper
2018Test of industrial Internet of Things. Opening the black box
Jaekel, Frank-Walter; Torka, Jan
Conference Paper
2018Test services for interoperable and secure shop-floor IT application interfaces in OPC-UA
Jäkel, Frank-Walter; Wolff, Tobias; Hackel, Leonard
Conference Paper
2018Trochoide Fräsbearbeitung mit Industrierobotern
Uhlmann, Eckart; Reinkober, Sascha; Hoffmann, Martin; Käpernick, Peer
Journal Article
2018Trochoide Fräsbearbeitung mit Industrierobotern
Uhlmann, E.; Reinkober, S.; Hoffmann, M.; Käpernick, P.
Journal Article
2018Trocken und rückstandsfrei CFK bearbeiten - Hochdruckstrahlschneiden mit flüssigem CO2
Uhlmann, Eckart; John, Patrick; Reinkober, Sascha
Journal Article
2018Ultrapräzisionsverfahren zur Erhöhung der Güte abbildender Beugungsgitter
Kühne, Stefan
: Stark, Rainer; Uhlmann, Eckart; Brinksmeier, E.
Dissertation
2018Understanding PLM and PLM customizing: A theoretical fundament for a conceptual approach
Venghaus, E.; Stark, R.
Conference Paper
2018Uniformed approach for exchange of functional and behavior models for simulation using Functional Modelling Interface (FMI)
Wekerle, Timo; Stjepandic, Josip; Pfouga, Alain; Blume, Claas
Conference Paper
2018Using OPC UA for Distributed Industrial Robot Control
Vick, Axel; Krüger, Jörg
Conference Paper
2018Using Transitive Relations for Automatic Creation of Consistent Traceability in Model-based Systems Engineering
Sünnetcioglu, Atakan; Stark, Rainer
Journal Article, Conference Paper
2018Validierung von AM-Laser-Metal-Deposition Simulationen mittels in-situ Verzugsmessungen an der aufgebauten Geometrie
Biegler, Max
Conference Paper
2018Verschleißverhalten neuartiger Mikrofräswerkzeuge mit Schneiden aus CBN bei der Hartzerspanung
Uhlmann, Eckart; Polte, Julian; Polte, Mitchel; Kuche, Yves; Wiesner, Hagen Maximilian
Journal Article
2018VIB-SHP - Virtuelle Inbetriebnahme für Industrie 4.0 zukunftssicher beherrschen
: Stark, Rainer (Hrsg.); Müller, Patrick (Hrsg.); Grosser, Hendrik (Hrsg.)
Report
2018ViB-SHP-Entwicklungsprozess mit Baukästen
Lünnemann, Pascal; Mathes, Bernhard
Book Article
2018ViB-SHP-Konzept in den Dimensionen des Engineering Operating System
Lünnemann, Pascal
Book Article
2018Virtualization technologies in product development
Krems, S.; Reich, D.; Stark, R.
Conference Paper
2018Vision-based Identification Service for Remanufacturing Sorting
Schlüter, Marian; Niebuhr, Carsten; Lehr, Jan; Krüger, Jörg
Journal Article, Conference Paper
2018Visual feedback for grasping in virtual reality environments for an interface to instruct digital human models
Geiger, Andreas; Bewersdorf, Imke; Brandenburg, Elisabeth; Stark, Rainer
Conference Paper
2018Visualizing trajectories for industrial robots from sampling-based path planning on mobile devices
Guhl, Jan; Vick, Axel; Vonasek, Vojtech; Krüger, Jörg
Conference Paper
2018Vorgehensmodell zur Methodenauswahl in Six-Sigma-Projekten
Ariza Alvarez, Julian Enrique
: Krüger, J.; Jochem, Roland; Woll, R.
Dissertation
2018Vorgehensweise zur Auslegung des Laserstrahlschmelzens am Beispiel von Wolframkarbid-Kobalt
Bergmann, André
: Rethmeier, Michael; Uhlmann, Eckart; Schmidt, Michael
Dissertation
2018Wear behaviour of HIPIMS coated micro-miling tools with cutting edge preparation for machining steel moulds
Uhlmann, Eckart; Kuche, Yves; Polte, Julian; Polte, Mitchel
Conference Paper
2018Weld pool shape observation in high power laser beam welding
Artinov, A.; Bakir, N.; Bachmann, M.; Gumenyuk, A.; Rethmeier, M.
Journal Article
2018Werkzeug- und prozessseitige Grundlagen des Schienenschleifens unter Berücksichtigung der Schienentemperatur und der Wechselwirkung mit dem Einsatzverhalten der Schiene
Lypovka, Pavlo
: Uhlmann, Eckart
Dissertation
2018Wissensmanagement im Kontext von Industrie 4.0
Orth, Ronald; Steinhöfel, Erik; Galeitzke, Mila; Hecklau, Fabian
Journal Article
2018Wissensmanagement in Freien Berufen
Steinhöfel, Erik
Journal Article
2018The Working Posture Controller: Automated adaptation of the workpiece pose to enable a neutral working posture
Nguyen, The Duy
: Stark, Rainer; Krüger, Jörg; Deuse, Jochen
Dissertation
20173D laser metal deposition in an additive manufacturing process chain
Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael
Abstract
2017Accuracy of a single camera, marker based surgical navigation system - simulation and implementation
Katanacho, Manuel; Krumpek, Oliver; Uhlmann, Eckart
Abstract
2017Adaptives Entwicklungstool zur intelligenten Konfigurierung von Condition-Monitoring-Algorithmen
Laghmouchi, Abdelhakim
Dissertation
2017Additiv gefertigte Kupferlegierungen
Uhlmann, E.; Kashevko, V.
Journal Article
2017Application of D-optimum experimental designs in consideration of restrictions for laser metal deposition
Marko, Angelina; Graf, Benjamin; Gook, Sergej; Rethmeier, Michael
Journal Article
2017Application of head-mounted devices with eye-tracking in virtual reality therapy
Lutz, O.H.-M.; Burmeister, C.; Dos Santos, L.F.; Morkisch, N.; Dohle, C.; Krüger, J.
Journal Article
2017Application of Spindle Speed Increaser as Sustainable Solution to Upgrade Machine Tools
Uhlmann, E.; Thom, S.; Ehricke, M.
Journal Article, Conference Paper
2017Assessing carbon dioxide emission reduction potentials of improved manufacturing processes using multiregional input output frameworks
Ward, H.; Burger, M.; Chang, Y.-J.; Fürstmann, P.; Neugebauer, S.; Radebach, A.; Sproesser, G.; Pittner, A.; Rethmeier, M.; Uhlmann, E.; Steckel, J.C.
Journal Article
2017Assessing visual attention in virtual reality: Automatic one-point calibration for eye-tracking
Lutz, O.H.-M.; Kruger, J.
Conference Paper
2017Assistenzsysteme für die Produktion
Kraus, Werner; Stelzer, Patrick; Trostmann, Erik; Surdilovic, Dragoljub
Book Article
2017Assistenzsysteme. Personalisierbare Assistenzkinematiken und am Körper getragene Hebehilfen
Kraus, Werner; Lefint, Jérémy; Müller, Veit; Schwarz, Oliver; Stelzer, Patrick; Surdilovic, Dragoljub; Trostmann, Erik
Book Article
2017Auslegung der additiven Prozesskette
Petrat, Torsten; Kersting, Robert
Journal Article
2017Baustrategien zur Beeinflussung von Materialauftrag und Temperaturentwicklung bei der additiven Fertigung mittels Laser-Pulver-Auftragschweißen
Petrat, Torsten
Conference Paper
2017Beitrag immaterieller Faktoren zur Bewältigung von Risiken in Industriellen Produkt-Service Systemen
Wewiór, Jakub Wojciech
: Seliger, Günther
Dissertation
2017BeMobil: Developing a user-friendly and motivating telerehabilitation system for motor relearning after stroke
Minge, M.; Ivanova, E.; Lorenz, K.; Joost, G.; Thüring, M.; Krüger, J.
Conference Paper
2017Benefits and obstacles of sustainable product development methods
Stark, R.; Buchert, T.; Neugebauer, S.; Bonvoisin, J.; Finkbeiner, M.
Journal Article
2017Bürstspanen von Profilen
Uhlmann, E.; Sommerfeld, C.; Renner, M.; Baumann, M.
Journal Article
2017Calibration of thermographic spot weld testing with X-ray computed tomography
Myrach, Philipp; Jonietz, Florian; Meinel, Dietmar; Suwala, Hubert; Ziegler, Mathias
Journal Article
2017Carbon Fibre Recycling from Milling Dust for the Application in Short Fibre Reinforced Thermoplastics
Uhlmann, E.; Meier, P.
Journal Article, Conference Paper
2017Characterization and optimization of ultra-precision machine tools and processes by time resolved PSD signature of micro/nano structured optical surfaces
Uhlmann, E.; Kühne, S.; Jagodzinski, M.; Malcher, M.
Conference Paper
2017Charakterisierung des Bruch- und Festigkeitsverhaltens von widerstandspunktgeschweißten Aluminiumverbindungen
Meschut, Gerson; Janzen, Vitalij; Rethmeier, Michael; Gumenyuk, Andrey; Frei, Julian
Journal Article
2017The chicken or the egg: The relationship between knowledge and business model innovation
Inkinen, H.; Steinhöfel, E.
Conference Paper
2017CNNs under attack. On the vulnerability of deep neural networks based face recognition to image morphing
Wandzik, Lukasz; Vicente-Garcia, Raul; Kaeding, Gerald; Chen, Xi
Conference Paper
2017CO2-Reinigung vor dem Impulsmagnetischen Schweißen
Uhlmann, E.; Drieux, S.; Jaczkowski, R.
Journal Article
2017Comparative analysis of German and Brazilian innovation systems to improve binational cooperation
Melo, G.; Haunschild, J.; Orth, R.; Will, M.; Kohl, H.
Conference Paper
2017A Comparison of Best Practices of Public and Private Support Incentives for the Remanufacturing Industry
Guidat, T.; Seidel, J.; Kohl, H.; Seliger, G.
Journal Article, Conference Paper
2017Compensating human feedback oscillation in compliance control for industrial robots
Nikoleizig, S.; Vick, A.; Krüger, J.
Conference Paper
2017Computerised mirror therapy with Augmented Reflection Technology for early stroke rehabilitation
Hoermann, S.; Santos, L.F. dos; Morkisch, N.; Jettkowski, K.; Sillis, M.; Devan, H.; Kanagasabai, P.S.; Schmidt, H.; Krüger, J.; Dohle, C.; Regenbrecht, H.; Hale, L.; Cutfield, N.J.
Journal Article
2017Contribution to a database of Ti-6Al-4V components manufactured with selective laser melting process
Uhlmann, Eckart; Bergmann, André; Gridin, Witalij; Rolon, Daniel Alexandre
Conference Paper
2017Cutting forces while machining STAVAX ESU with binderless-cBN
Uhlmann, E.; Oberschmidt, D.; Polte, J.; Polte, M.
Conference Paper
2017Cutting Simulation with Consideration of the Material Hardening in the Shear Zone of AISI1045
Uhlmann, E.; Henze, S.; Brömmelhoff, K.; Reimers, W.
Journal Article, Conference Paper
2017Decentralized data analytics for maintenance in industrie 4.0
Uhlmann, Eckart; Laghmouchi, Abdelhakim; Geisert, Claudio; Hohwieler, Eckhard
Journal Article, Conference Paper
2017Deployment of a business and innovation centre to foster cooperation between Europe and Brazil
Haunschild, Johanna; Melo, Gustavo; Orth, Ronald; Will, Markus; Kohl, Holger
Conference Paper
2017Depth map based point cloud registration to CT patient data for surgical navigation
Katanacho, Manuel; Lack, John-Certus; Hoffmann, Jonas; Uhlmann, Eckart
Conference Paper
2017Design of a test environment for planning and interaction with virtual production processes
Buchholz, C.; Kind, S.; Stark, R.
Journal Article, Conference Paper
2017Die-Sinking EDM of high aspect ratio cavities in nickel-base alloy
Domingos, David Carlos
: Uhlmann, Eckart
Dissertation
2017Droplet removal from PVD-coated micro-milling tools with the immersed tumbling process
Uhlmann, E.; Kuche, Y.; Oberschmidt, D.; Polte, J.
Conference Paper
2017Dry-EDM milling of micro-scale features with high speed rotating tungsten tube electrodes
Uhlmann, E.; Perfilov, I.; Schimmelpfennig, T.-M.; Schweitzer, L.; Yabroudi, S.
Conference Paper
2017Dynamical Fatigue Behavior of Additive Manufactured Products For a Fundamental Life cycle Approach
Uhlmann, E.; Fleck, C.; Gerlitzky, G.; Faltin, F.
Journal Article, Conference Paper
2017Einflussfaktoren der Reinigung mit flüssigem Kohlendioxid auf fertigungsrelevante Materialeigenschaften medizintechnischer Kunststoffe
Mankiewicz, Johannes
: Uhlmann, Eckart
Dissertation
2017Einsatz von CFK-Fräspartikeln als Füllstoff
Uhlmann, E.; Meier, P.
Journal Article
2017Einsatzverhalten nanocomposite-beschichteter PcBN-Werkzeuge für die Hartdrehbearbeitung.
Oyanedel Fuentes, Javier Alejandro
: Uhlmann, Eckart (Hrsg.)
Dissertation
2017Empirical study on status of preparation for ISO 9001:2015
Rybski, C.; Jochem, R.; Homma, L.
Journal Article, Conference Paper
2017Energieautarke Kühlung von Lineardirektantrieben
Uhlmann, E.; Salein, S.
Journal Article
2017Energy efficiency and environmental impacts of high power gas metal arc welding
Sproesser, G.; Chang, Y.-J.; Pittner, A.; Finkbeiner, M.; Rethmeier, M.
Journal Article
2017Enhancing international collaboration through regional innovation hubs
Cap, Jan-Patrick; Haunschild, Johanna; Melo, Gustavo; Battistella Luna, Marina
Conference Paper
2017Entwicklung eines Verfahrens zur Bestimmung der Rissanfälligkeit von hochfesten Stählen beim Widerstandspunktschweißen
Rethmeier, Michael; Suwala, Hubert; Frei, Julian
: Salomon, Rainer (Hrsg.)
Report
2017Environmental energy efficiency of single wire and tandem gas metal arc welding
Sproesser, G.; Chang, Y.-J.; Pittner, A.; Finkbeiner, M.; Rethmeier, M.
Conference Paper
2017EWM and DVS presented EWM Award for augmented reality assistance system for welding
Rethmeier, M.; Stöckl, R.; Atzberger, A.
Journal Article
2017Fräsen partikelverstärkter Titanmatrix-Verbundwerkstoffe
Uhlmann, E.; Kaulfersch, F.
Journal Article
2017Fräsen von Titanmatrix-Verbundwerkstoffen
Uhlmann, E.; Kaulfersch, F.F.
Journal Article
2017Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik. Jahresbericht 2016/2017
 
Annual Report
2017Future of Business Models in Manufacturing
Seidel, Johannes; Barquet, Ana Paula; Seliger, Günther; Kohl, Holger
Book Article
2017A guideline for planning and implementing an action-based and transnational course in higher engineering education
Stock, T.; Haskins, C.; Gladysz, B.; Urgo, M.; Kohl, H.
Conference Paper
2017Herstellung und Einsatz von PKD-Mikrofräswerkzeugen
Polte, Mitchel
: Uhlmann, Eckart
Dissertation
2017High-performance benchmarking of manufacturing processes with object-based modeling
Zhou, X.; Kohl, H.
Journal Article
2017Hybrid laser arc welding of X80 and X120 steel grade
Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael
Journal Article
2017Hypothetical sustainability axioms for axiomatic design with an application in grinding machine design
Garretson, I.C.; Linke, B.S.; Peukert, B.; Uhlmann, E.
Conference Paper
2017Industrie 4.0 - Digital Redesign of Product Creation and Production in Berlin as an Industrial Location
Stark, R.; Damerau, T.; Lindow, K.
Book Article
2017Industrie 4.0 im Produktionsumfeld
Knothe, Thomas; Reiff-Stephan, Jörg; Vladova, Gergana; Ullrich, André; Lipinski, René von; Buße, Dirk; Kern, Manuel
Book Article
2017Influence of non-uniform martensitic transformation on residual stresses and distortion of GMA-welding
Neubert, S.; Pittner, A.; Rethmeier, M.
Journal Article
2017Influence of Procedure-Related Cutting Edge Micro Geometry Modification on the Production Quality When Milling Fibre Reinforced Plastics
Uhlmann, E.; Stawiszynski, B.; Protz, F.; Prasol, L.
Journal Article
2017Innovations in digital modelling for next generation manufacturing system design
Stark, R.; Kind, S.; Neumeyer, S.
Journal Article
2017Innovative control of assembly systems and lines
Krüger, J.; Wang, L.; Verl, A.; Bauernhansl, T.; Carpanzano, E.; Makris, S.; Fleischer, J.; Reinhart, G.; Franke, J.; Pellegrinelli, S.
Journal Article
2017Innovative Roboteranwendung: das Experiment Catch
Surdilovic, D.; Surdilovic, J.; Fernandez, R.
Journal Article
2017Instrument calibration for a camera based surgical navigation system
Katanacho, Manuel; Krumpek, Oliver; Uhlmann, Eckart; Melnik, Steffen
Abstract
2017An integrated approach for industrial robot control and programming combining haptic and non-haptic gestures
Hügle, J.; Lambrecht, J.; Krüger, J.
Conference Paper
2017Intellectual Capital-Driven Technology and Innovation Management
Galeitzke, M.; Steinhöfel, E.; Orth, R.; Kohl, H.
Journal Article
2017Intelligent pattern recognition of a SLM machine process and sensor data
Uhlmann, E.; Pontes, R.P.; Laghmouchi, A.; Bergmann, A.
Journal Article, Conference Paper
2017Intelligent pattern recognition of SLM machine energy data
Uhlmann, E.; Pastl Pontes, R.; Laghmouchi, A.; Hohwieler, E.; Feitscher, R.
Journal Article
2017Intelligent production systems in the era of industrie 4.0 - changing mindsets and business models
Uhlmann, E.; Hohwieler, E.; Geisert, C.
Journal Article
2017Intelligente Reinigungs- und Analyseprozesse
Mankiewicz, Johannes; Rochowicz, Markus; Ihde, Jörg
Journal Article
2017Kantenpräparation durch Formschleifprozesse
Uhlmann, E.; Bruckhoff, J.
Journal Article
2017Kinematisch modulierte Schleifprozesse zur Strukturierung von tribologisch beanspruchten Funktionsoberflächen
Bäcker, Clemens
: Göhlich, D.; Uhlmann, E.; Karpuschewski, B.
Dissertation
2017Kognitive Modelle zur virtuellen Absicherung der mentalen Belastung bei Montagetätigkeiten
Brandenburg, Elisabeth; Döllinger, Nina; Geiger, Andreas; Stark, Rainer
Conference Paper
2017Kubisch-kristallines Bornitrid ohne Bindephase als Schneidstoff in der Ultrapräzisions-Zerspanung
Polte, Julian
: Uhlmann, Eckart
Book
2017Let's do this together: Bi-Manu-Interact, a novel device for studying human haptic interactive behavior
Ivanova, E.; Krause, A.; Schälicke, M.; Schellhardt, F.; Jankowski, N.; Achner, J.; Schmidt, H.; Joebges, M.; Krüger, J.
Conference Paper
2017Liquid covered micro-milling
Uhlmann, E.; Oberschmidt, D.; Polte, M.; Polte, J.
Conference Paper
2017Low-dimensional time-discrete models for high dynamic machine tools
Uhlmann, E.; Reis, T.; Oberschmidt, D.; Rendel, O.; Guhde, S.
Conference Paper
2017Manufacturing of CVD diamond micro-end mills with electrical discharge machining
Uhlmann, E.; Oberschmidt, D.; Polte, M.; Polte, J.; Schimmelpfennig, T.-M.; Börnstein, J.
Conference Paper
2017Maturity model and action recommendation: A PSS capability self-assessment tool for companies
Exner, K.; Zimpfer, R.; Stark, R.
Journal Article, Conference Paper
2017Measurement of in-mould shear rates by x-ray particle image velocimetry
Uhlmann, E.; Hein, C.; Oberschmidt, D.
Conference Paper
2017Metamorphose zur intelligenten und vernetzten Fabrik
Gelec, Erdem; Kern, Manuel; Schneider, Benjamin; Ullrich, André; Vladova, Gergana; Gronau, Norbert; Lipinski, René von; Buße, Dirk; Oertwig, Nicole
Book Article
2017A model for the development of sustainable innovations for the early phase of the innovation process
Stock, T.; Obenaus, M.; Slaymaker, A.; Seliger, G.
Journal Article, Conference Paper
2017Modeling and Analysis of Contact Conditions during NC-Form Grinding of Cutting Edges
Uhlmann, E.; Bruckhoff, J.
Journal Article
2017Modeling approach regarding surface functionalization by force-controlled micro and nano forming
Uhlmann, E.; Kühne, S.; Jagodzinski, M.; Malcher, M.; Trevino, R.
Conference Paper
2017Numerical simulation of thermally induced residual stresses in friction stir welding of aluminum alloy 2024-T3 at different welding speeds
Bachmann, M.; Carstensen, J.; Bergmann, L.; dos Santos, J.F.; Wu, C.S.; Rethmeier, M.
Journal Article
2017Overview and new developments in research on resistance spot welding of advanced high strength steels
Frei, Julian; Rethmeier, Michael
Conference Paper
2017PLM Customizing
Sucuoglu, E.; Exner, K.; Stark, R.
Conference Paper
2017Die Potentiale einer lernfähigen Produktion nutzen
Krüger, J.; Sauer, A.; Zäh, M.F.
Journal Article
2017Precision enhancement technologies for multi-axis ultra precision machining of freeform optical elements with variable micro/nano structures
Uhlmann, E.; Kühne, S.; Jagodzinski, M.; Widemann, R.; Haskic, K.
Conference Paper
2017Proactive maintenance as success factor for use-oriented Product-Service Systems
Exner, K.; Schnürmacher, C.; Adolphy, S.; Stark, R.
Journal Article, Conference Paper
2017Probabilities in safety of machinery - risk reduction through fixed and moveable guards by standardized impact tests, part 1: Applications and consideration of random effects
Landi, L.; Mödden, H.; Pera, F.; Uhlmann, E.; Meister, F.
Conference Paper
2017Probabilities in safety of machinery - risk reduction through fixed and moveable guards by standardized impact tests, part 2: Possible improvements with FE impact simulations
Landi, L.; Uhlmann, E.; Meister, F.; Pera, F.; Mödden, H.
Conference Paper
2017Region of interest detection with iterative colour clustering and a global weighting scheme
Katanacho, Manuel; Hoffmann, Jonas; Uhlmann, Eckart
Abstract
2017Resource-optimized verification planning for mechatronic systems in the virtual stage of product creation
Gerhorst, Frank
: Stark, R.
Dissertation
2017Ressourcenadaptive Produktionssysteme
Cherkaskyy, Michael; Feitscher, Roberto; Hohwieler, Eckhard; Oertwig, Nicole; Stoldt, Johannes; Wenzel, Ken
Book Article
2017Ressourcenoptimiertes Produktdesign
Graf, Roberta; Ko, Nathanael; Buchert, Tom; Rothenburg, Uwe
Book Article
2017Safe human-robot-collaboration-introduction and experiment using ISO/TS 15066
Rosenstrauch, M.J.; Kruger, J.
Conference Paper
2017Schritte zur Qualifizierung der Schweißstruktursimulation für die additive Fertigung am Beispiel Laser-Pulver-Auftragsschweißen
Biegler, Max
Conference Paper
2017Shortened manufacturing of individualized carbide tools by selective laser melting and hot isostatic pressing
Uhlmann, Eckart; Bergmann, André; Gridin, Witalij
Conference Paper
2017SHPbench - a smart hybrid prototyping based environment for early testing, verification and (user based) validation of advanced driver assistant systems of cars
Buchholz, C.; Vorsatz, T.; Kind, S.; Stark, R.
Journal Article, Conference Paper
2017Simulation erlaubt den Einblick beim Auftragsschweißen
Biegler, Max
Journal Article
2017Simulationsgestütztes Performance Measurement zur Wirtschaftlichkeitsbewertung von Managementsystemen
Raßfeld, Colin
: Krüger, J.; Jochem, R.; Woll, R.
Dissertation
2017Simulationsmodell als Basis zur Ableitung von Zerspanstrategien zur Reduzierung von thermischen Bearbeitungseinflüssen beim Hartdrehen
Ivanov, Ivan Mitkov
: Uhlmann, Eckardt
Dissertation
2017Smart life cycle monitoring for sustainable maintenance and production
Uhlmann, Eckart; Pastl Pontes, Rodrigo; Laghmouchi, Abdelhakim; Geisert, Claudio; Hohwieler, Eckhard
Journal Article, Conference Paper
2017Smart wireless sensor network and configuration of algorithms for condition monitoring applications
Uhlmann, E.; Laghmouchi, A.; Geisert, C.; Hohwieler, E.
Journal Article
2017Spanende Bearbeitung von Faserverbundkunststoffen
Uhlmann, E.; Christiansen, G.
Journal Article
2017Statistische Analyse der Schweißraupengeometrie von Ti6Al4V beim Laserbeschichten
Marko, Angelina; Graf, Benjamin; Rethmeier, Michael
Journal Article
2017Steigerung des Formänderungsvermögens der Magnesiumlegierung AZ31 bei Raumtemperatur unter Nutzung der elektro-magnetischen Umformung
Prasol, Lukas
: Uhlmann, Eckart
Dissertation
2017Substitution of Coolant by Using a Closed Internally Cooled Milling Tool
Uhlmann, E.; Riemer, H.; Schröter, D.; Sammler, F.; Richarz, S.
Journal Article, Conference Paper
2017Surface structuring by pulsed laser implantation
Hilgenberg, K.; Rethmeier, M.; Steinhoff, K.
Journal Article
2017Sustainability in model-based planning and control of global value creation networks
Oertwig, N.; Jochem, R.; Knothe, T.
Journal Article, Conference Paper
2017SysML-Modelle maschinell verstehen und verknüpfen
Mochine, Philipp; Sünnetcioglu, Atakan; Dungern, Oskar von; Stark, Rainer
Conference Paper
2017Target-driven selection and scheduling of methods for sustainable product development
Buchert, Tom; Halstenberg, Friedrich A.; Bonvoisin, Jeremy; Lindow, Kai; Stark, Rainer
Journal Article
2017Teilprojekt TP 1 - Information im PLM-Prozess
Rothenburg, Uwe
Book Article
2017Temperature generation of different travel path strategies to build layers using Laser Metal Deposition
Petrat, Torsten; Graf, Benjamin; Winterkorn, René; Gumenyuk, Andrey; Rethmeier, Michael
Conference Paper
2017Trockeneisstrahlen als Vorbehandlungsverfahren vor dem Galvanisieren
Baira, El Mustapha
: Uhlmann, E.; Jochem, R.; Kohl, H.; Krüger, J.; Rethmeier, M.; Seliger, G.; Stark, R.
Dissertation
2017Ultrasonic Assisted Milling of Reinforced Plastics
Uhlmann, E.; Protz, F.; Stawiszynski, B.; Heidler, S.
Journal Article, Conference Paper
2017Umweltbewertung und Ökoeffizienz beim Metall-Schutzgasschweißen von Dickblechverbindungen
Sproesser, Gunther
: Rethmeier, Michael
Dissertation
2017Unified information access in product creation with an integrated control desk
Wrasse, Kevin; Diener, Holger; Hayka, Haygazun; Stark, Rainer
Conference Paper
2017Utilization of product lifecycle data from PLM systems in platforms for Industrial Symbiosis
Halstenberg, F.A.; Lindow, K.; Stark, R.
Journal Article, Conference Paper
2017Verfahren, Anordnung und Computerprogrammprodukt zur Lageerfassung eines zu untersuchenden Objektes
Engel, Sebastian; Katanacho, Manuel; Keeve, Erwin; Uhlmann, Eckart
Patent
2017Verschleiß an Gleitschleifkörpern
Uhlmann, E.; Eulitz, A.; Männel, C.
Journal Article
2017Vibrationsunterstützte Senkerosion. Senkerosive Fertigung von Dichtschlitzen in einer Nickelbasislegierung mit Vibrationsunterstützung
Uhlmann, E.; Domingos, C.D.; Yabroudi, S.; Bolz, R.
Journal Article
2017Virtual Prototyping and Validation of Cpps within a New Software Framework
Neumeyer, S.; Exner, K.; Kind, S.; Hayka, H.; Stark, R.
Journal Article
2017Vorhersage zur Bauteilmaßhaltigkeit bei der additiven Fertigung mittels Schweißstruktursimulation
Biegler, Max; Rethmeier, Michael
Conference Paper
2017Wear behaviour of diamond coated micro-milling tools during micro machining
Uhlmann, E.; Kuche, Y.; Oberschmidt, D.; Polte, J.
Conference Paper
2017Wear performance of diamond coated WC-Co tools with a CrN interlayer
Chandran, M.; Sammler, F.; Uhlmann, E.; Akhvlediani, R.; Hoffman, A.
Journal Article
2017Wege in die Zukunft der Produktion. Ganzheitliche Mitarbeitereinbindung als Befähiger für die Transformation zur Industrie 4.0
Knothe, T.; Ullrich, A.; Weinert, N.
Journal Article
2017Werkzeuge
Oertwig, Nicole; Rimmelspacher, Sven O.; Vladova, Gergana; Ullrich, André; Gronau, Norbert; Gelec, Erdem
Book Article
2017Why not using ceramics - trends from ceramics research
Stepanyan, Marina; Seifert, Gerhard; Weiß, Torsten; Klein, Tiago Borsoi; Freund, Susanne
Journal Article
2017Wissensbasierte Entwicklung nachhaltiger Produkte
Lindow, Kai
: Meyer, H.J.; Stark, R.G.; Hansen, E.G.
Dissertation
2017The working posture controller: Automated assessment and optimisation of the working posture during the process
Nguyen, T.D.; Pilz, C.; Krüger, J.
Conference Paper
2017Zeitdiskretes echtzeitfähiges Berechnungsmodell
Uhlmann, E.; Reis, T.; Rendel, O.; Guhde, S.
Journal Article