| | |
|---|
| 2020 | Assistenzsystem für die Entwicklung nachhaltiger Produkte
Buchert, Tom
: Kohl, H.; Stark, Rainer; Anderl, R. | Dissertation |
| 2020 | Automated Tool‐Path Generation for Rapid Manufacturing of Additive Manufacturing Directed Energy Deposition Geometries
Biegler, M.; Wang, J.; Kaiser, L.; Rethmeier, M. | Journal Article |
| 2020 | Avoidance of end crater imperfections at high-power laser beam welding of closed circumferential welds
Gook, S.; Ömer, Ü.; Gumenyuk, A.; Rethmeier, M. | Journal Article |
| 2020 | Avoidance of liquid metal embrittlement during resistance spot welding by heat input dependent hold time adaption
Böhne, C.; Meschut, G.; Biegler, M.; Rethmeier, M. | Journal Article |
| 2020 | Building up a national network of applied R&D institutes in an emerging innovation system
Kohl, H.; Will, M.; Prim, M.F.; Pavim, A.X. | Journal Article |
| 2020 | Decentralised identification of used exchange parts with a mobile application
Lehr, J.; Schlüter, M.; Krüger, J. | Journal Article |
| 2020 | Demand-oriented barriers and potentials for remanufacturing in Vietnam
Guidat, T.; Wewer, A.; Kohl, H.; Seliger, G. | Journal Article |
| 2020 | Design alternatives for internationally distributed learning factories in global production engineering
Schumacher, B.C.; Steinbach, A.; Vi, N.H.; Yükseltürk, A.; Kohl, H.; Krüger, J.; Quoc, H.N. | Journal Article, Conference Paper |
| 2020 | Determining the shape of reflectance reference samples for curved surface reflectors
Lanevski, D.; Manoocheri, F.; Vaskuri, A.; Hameury, J.; Kersting, R.; Monte, C.; Adibekyan, A.; Kononogova, E.; Ikonen, E. | Journal Article, Conference Paper |
| 2020 | Development of an Industrial Internet of Things Ontologies System
Fedotova, A.V.; Lindow, K.; Norbach, A. | Conference Paper |
| 2020 | Effectivity of Learning Factories to convey problem solving competencies
Sieckmann, F.; Petrusch, N.; Kohl, H. | Journal Article, Conference Paper |
| 2020 | Einsatzverhalten keramischer Fräswerkzeuge bei der Zerspanung von glas- und kohlenstofffaserverstärkten Kunststoffen
Stawiszynski, Bartek
: Kohl, Holger; Uhlmann, Eckart; Biermann, Dirk | Dissertation |
| 2020 | Electrical discharge dressing of honing stones
Uhlmann, E.; Yabroudi, S.; Zimmermann, S.; Gerlitzky, G.; Polte, M.; Klink, U.; Sihling, B. | Journal Article |
| 2020 | Ensure OPC-UA interfaces for digital plug-and-produce
Jaekel, F.-W.; Wolff, T.; Happersberger, V.; Knothe, T. | Conference Paper |
| 2020 | Entwicklung eines Assistenzsystems zur Konfiguration und Implementierung von GPS. GPS-Einführung in kmu der Pharmaindustrie
Sieckmann, F.; Kohl, H. | Journal Article |
| 2020 | Experimental and numerical study on the influence of the laser hybrid parameters in partial penetration welding on the solidification cracking in the weld root
Bakir, N.; Üstündağ, Ö.; Gumenyuk, A.; Rethmeier, M. | Journal Article |
| 2020 | Geometric distortion-compensation via transient numerical simulation for directed energy deposition additive manufacturing
Biegler, M.; Elsner, B.A.M.; Graf, B.; Rethmeier, M. | Journal Article |
| 2020 | Hybrid laser arc welding of thick high-strength pipeline steels of grade X120 with adapted heat input
Üstündag, Ömer; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael | Journal Article |
| 2020 | Implementation with agile project management approaches: Case study of an industrie 4.0 learning factory in China
Scholz, J.-A.; Sieckmann, F.; Kohl, H. | Journal Article, Conference Paper |
| 2020 | Increasing challenges for sustainability for manufacturing industry based on global, national and technological initiatives
Kohl, H.; Schliephack, W.; Muschard, B. | Journal Article, Conference Paper |
| 2020 | Influence of the fatty acid profile on the lubricating film formation in micro-milling process on 7050-T7451 aluminum alloy
Chanes de Souza, M.; Wiesner, H.M.; Kuche, Y.; Polte, J.; Oliveira Gomes, J. de; Uhlmann, E. | Journal Article |
| 2020 | Intuitive Werkzeuge für ein durchgehendes Engineering. Technologieintegrierte Fabrikplanung für KMU
Glodde, I.; Scholz, H.; Knothe, T.; Kohl, H. | Journal Article |
| 2020 | Investigation of the Metallurgical and Thermo-Mechanical Factors Influencing Centreline Solidification Cracking by Laser Beam and Hybrid Welding
Quiroz Penaranda, Vanessa
: Stark, Rainer | Dissertation |
| 2020 | IoT-T
Rennoch, Axel; Jäkel, Frank-Walter; Hackel, Sascha; Stomber, Jens; Stölzle, Stefan; Wardaschka, Andre; Kaiser, Alexander | Report |
| 2020 | JUMP Planner
Rimmelspacher, Sven O.; Gering, Patrick; Lemcke, Anne; Schneider, Benjamin | Book Article |
| 2020 | Mechanical Properties Characterization of Welded Automotive Steels
Javaheri, E.; Lubritz, J.; Graf, B.; Rethmeier, M. | Journal Article |
| 2020 | Modelling of a thermoelectric self-cooling system based on thermal resistance networks for linear direct drives in machine tools
Uhlmann, E.; Salein, S.; Polte, M.; Triebel, F. | Journal Article |
| 2020 | Modular virtual reality to enable efficient user studies for autonomous driving
Konkol, K.; Brandenburg, E.; Stark, R. | Conference Paper |
| 2020 | Neueste Entwicklungen im Bereich des Hochleistungslaserstrahl- und Hybridschweißens von hohen Blechdicken
Üstündag, Ömer; Bakir, Nasim; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael | Journal Article |
| 2020 | Optimization with the evolution strategy by example of electrical-discharge drilling
Streckenbach, J.; Koref, I.S.; Rechenberg, I.; Uhlmann, E. | Journal Article |
| 2020 | Organizational planning for quality management in the digital age
Behmer, F.J.; Jochem, R. | Journal Article |
| 2020 | Prevention of liquid metal embrittlement cracks in resistance spot welds by adaption of electrode geometry
Böhne, Christoph; Meschut, Gerson; Biegler, Max; Frei, Julian; Rethmeier, Michael | Journal Article |
| 2020 | Process behaviour of micro-textured CVD diamond thick film cutting tools during turning of Ti-6Al-4V
Uhlmann, E.; Schröter, D. | Journal Article, Conference Paper |
| 2020 | Qualification of computational welding mechanics approaches for simulation of directed energy deposition
Biegler, Max Robert
: Rethmeier, Michael | Dissertation |
| 2020 | Quantifying mechanical properties of automotive steels with deep learning based computer vision algorithms
Javaheri, E.; Kumala, V.; Javaheri, A.; Rawassizadeh, R.; Lubritz, J.; Graf, B.; Rethmeier, M. | Journal Article |
| 2020 | Reduktion thermisch bedingter Verlagerungen durch Integration von Peltierelementen in eine Hochfrequenzmotorspindel
Uhlmann, E.; Salein, S.; Iden, N.; Polte, J.; Temme, P.; Hartung, D.; Perschewski, S. | Journal Article |
| 2020 | Smart hybrid prototyping in manual automotive assembly validation
Wolf, B.; Kind, S.; Stark, R. | Journal Article, Conference Paper |
| 2020 | Sortierung von Objekten in mikrofluidischen Systemen auf Basis von piezogetriebenen Aktoren
Horbert, Peter Paul
: Meyer, H.J.; Uhlmann, E.; Henkel, T. | Dissertation |
| 2020 | Sustainable engineering master module - insights from three cohorts of European engineering team
Gladysz, B.; Urgo, M.; Stock, T.; Haskins, C.; Sieckmann, F.; Jarzebowska, E.; Kohl, H.; Strandhagen, J.O.; Tollio, T. | Journal Article |
| 2020 | Towards Deep Learning in Industrial Applications Taking Advantage of Service-Oriented Architectures
Briese, C.; Schlüter, M.; Lehr, J.; Maurer, K.; Krüger, J. | Journal Article, Conference Paper |
| 2020 | Trochoid milling with industrial robots
Uhlmann, E.; Reinkober, S.; Hoffmann, M.; Käpernick, P. | Journal Article, Conference Paper |
| 2019 | Elektromechanisches Glattwalzen von Stahllegierungen
Uhlmann, E.; Thom, S.; Prasol, L.; Haberbosch, K.; Drieux, S. | Journal Article |
| 2019 | 3-Achs-Portalfräsmaschine als Demonstrator für ein modulares Werkzeugmaschinengestell
Uhlmann, E.; Polte, M.; Blumberg, J.; Peukert, B. | Journal Article |
| 2019 | 4G/5G-Campusnetze und FTS-Einsatz
Chemnitz, Moritz; Vick, Axel; Lambrecht, Jens | Journal Article |
| 2019 | Agent-based simulation for production planning and control in consideration of disruption events
Bui, M.D.; Nguyen, Q.H.; Kohl, H. | Conference Paper |
| 2019 | Application of laser surface nanotexturing for the reduction of peri-implantitis on biomedical grade 5 Ti-6Al-4V dental abutments
Uhlmann, E.; Schweitzer, L.; Cunha, A.; Polte, J.; Huth-Herms, K.; Kieburg, H.; Hesse, B. | Conference Paper |
| 2019 | Assessment of thermal cycles by combining thermo-fluid dynamics and heat conduction in keyhole mode welding processes
Artinov, A.; Karkhin, V.; Khomich, P.; Bachmann, M.; Rethmeier, M. | Journal Article |
| 2019 | Automated tool-path generation for rapid manufacturing and numerical simulation of additive manufacturing LMD geometries
Biegler, Max; Wang, Jiahan; Graf, Benjamin; Rethmeier, Michael | Conference Paper |
| 2019 | An automatic calibration approach for a multi-camera-robot system
Kroeger, Ole; Hügle, Johannes; Niebuhr, Carsten A. | Conference Paper |
| 2019 | Automatically welded tubular X-joiuts
Schaumann, P.; Schürmann, K.; Pirtner, A.; Rethmeier, M. | Conference Paper |
| 2019 | Avoidance of End Crater Imperfections at High-Power Laser Beam Welding of Closed Circumferential Welds
Gook, Sergej; Üstündag, Ömer; Gumenyuk, Andrey; Rethmeier, Michael | Presentation |
| 2019 | Belt grinding of cast iron without cooling lubricant
Uhlmann, E.; Buelter, M. | Journal Article, Conference Paper |
| 2019 | Best Practice Example 12. LEAN-Factory for a pharmaceutical Company in Berlin, Germany
Kohl, Holger; Jochem, Roland; Sieckmann, Felix; Rybski, Christoffer | Book Article |
| 2019 | Bounded Collision Force by the Sobolev Norm: Compliance and Control for Interactive Robots
Haninger, Kevin; Surdilovic, Dragoljub | Conference Paper |
| 2019 | Classification of Similar Objects of Different Sizes Using a Reference Object by Means of Convolutional Neural Networks
Lehr, Jan; Schlüter, Marian; Krüger, Jörg | Conference Paper |
| 2019 | Cognitive Edge for Factory
Lambrecht, Jens; Steffens, Ernst Joachim; Geitz, Marc; Vick, Axel; Funk, Eugen; Steigerwald, Wolfgang | Conference Paper |
| 2019 | Combining the Advantages of On- and Offline Industrial Robot Programming
Guhl, Jan; Nikoleizig, Sylvio; Heimann, Oliver; Hügle, Johannes; Krüger, Jörg | Conference Paper |
| 2019 | CVD-Diamantwerkzeuge mit SiC-Zwischenschicht
Uhlmann, E.; Barth, E.; Gäbler, J.; Höfer, M. | Journal Article |
| 2019 | Data preparation for data analytics (DPDA)
Stark, Rainer; Deuse, Jochen; Damerau, Thomas; Reckelkamm, Thorsten; Lindow, Kai | Journal Article |
| 2019 | Data Preparation for Data Analytics (DPDA)
Reckelkamm, Thorsten; Damerau, Thomas | Journal Article |
| 2019 | Datengetriebene Anwendungserstellung
Fraas, Philipp; Thierse, Paul; Chemnitz, Moritz | Book Article |
| 2019 | Deep learning for part identification based on inherent features
Krüger, Jörg; Lehr, Jan; Schlüter, Marian; Bischoff, Nils | Journal Article |
| 2019 | Development and operation of Digital Twins for technical systems and services
Stark, Rainer; Fresemann, Carina; Lindow, Kai | Journal Article |
| 2019 | Development capabilities for smart products
Tomiyama, T.; Lutters, E.; Stark, R.; Abramovici, M. | Journal Article |
| 2019 | Development of a Fire Detection Based on the Analysis of Video Data by Means of Convolutional Neural Networks
Lehr, Jan; Gerson, Christian; Ajami, Mohamad; Krüger, Jörg | Conference Paper |
| 2019 | Development of a novel optical measurement technique to investigate the hot cracking susceptibility during laser beam welding
Bakir, N.; Pavlov, V.; Zavjalov, S.; Volvenko, S.; Gumenyuk, A.; Rethmeier, M. | Journal Article |
| 2019 | Development of an organizational structure model as a basis for the assessment of the digital transformation of organizations
Kidschun, F.; Hecklau, F.; Orth, R.; Wackernagel, J.P.; Singer, K. | Conference Paper |
| 2019 | Digital Twin
Stark, Rainer; Damerau, Thomas | Book Article |
| 2019 | Drei Zukunftsszenarien. Additive Fertigung im Jahr 2025 in Deutschland
Riemer, Annamaria; Döbel, Inga; Welz, Juliane; Knitsch, Valentin; Bergmann, André; Giebitz, Danny; Schüll, Elmar | Book |
| 2019 | Ecological and functional optimization of the pretreatment process for plasma based coatings of cutting tools
Uhlmann, E.; Riemer, H.; An, S.; Fröhlich, M.; Paschke, H.; Petersen, M. | Journal Article, Conference Paper |
| 2019 | Einfluss der Schärfparameter auf die Schleifscheibentopographie
Uhlmann, E.; Muthulingam, A. | Journal Article |
| 2019 | Einsatzverhalten von CVD-Diamantdünnschichtwerkzeugen
Uhlmann, E.; Hinzmann, D. | Journal Article |
| 2019 | Energieeffizienz in der intelligenten Fabrik
Thiele, Gregor; Grabowski, K.; Krüger, J. | Journal Article |
| 2019 | Energy Efficiency Optimization using AutomationML modeling and an EnPI methodology
Thiele, Gregor; Khorsandi, Niloufar; Krüger, Jörg | Conference Paper |
| 2019 | Entwicklung eines methodengestützten Vorgehensmodells für das Qualitätsmanagement Reporting (QMR)
Gruber, Tobias
: Krüger, Jörg; Jochem, Roland | Dissertation |
| 2019 | Experimental and numerical assessment of weld pool behavior and final microstructure in wire feed laser beam welding with electromagnetic stirring
Meng, X.; Bachmann, M.; Artinov, A.; Rethmeier, M. | Journal Article |
| 2019 | Fallbasierte Feinplanung im Rahmen der kurzfristigen Fertigungssteuerung
Arlt, Reinhard
: Jochem, Roland; Kohl, Holger; Specht, D.; Mertins, K. | Dissertation |
| 2019 | Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik. Jahresbericht 2018/2019
| Annual Report |
| 2019 | From process to activity in the data flow
Lünnemann, Pascal; Riedelsheimer, Theresa; Wehking, Sebastian; Lindow, Kai | Journal Article |
| 2019 | Gestaltungsrichtlinien für die Visualisierung von Produktinformationen in der virtuellen Umgebung CAVE zur Unterstützung von Design Review Teams
Brandenburg, Elisabeth
: Krüger, J.; Stark, Rainer; Thüring, M. | Dissertation |
| 2019 | Heat treatment of SLM-LMD hybrid components
Uhlmann, Eckart; Düchting, Jan; Petrat, Torsten; Graf, Benjamin; Rethmeier, Michael | Conference Paper |
| 2019 | Herausforderungen in der Mikrozerspanung
Kuche, Yves; Eckert, Udo | Presentation |
| 2019 | Highspeed-Plasma-Laser-Cladding (HPLC) als hybrides Beschichtungsverfahren: Evaluierung des Einsatzpotentials für hohe Prozessgeschwindigkeiten
Brunner-Schwer, Christian; Schreiber, Frank; Graf, Benjamin; Rethmeier, Michael | Conference Paper |
| 2019 | Highspeed-plasma-laser-cladding of thin wear resistance coatings: A process approach as a hybrid metal deposition-technology
Brunner-Schwer, Christian; Petrat, Torsten; Graf, Benjamin; Rethmeier, Michael | Journal Article |
| 2019 | Hochleistungsbohrwerkzeuge für CFK
Uhlmann, E.; Christiansen, G.; Reimers, W.; Brömmelhoff, K. | Journal Article |
| 2019 | Hybrid laser arc welding of thick plates X8Ni9 for LNG tank construction
Gook, Sergej; El-Batahgy, A-M.; Gumenyuk, Andrey; Rethmeier, Michael | Conference Paper |
| 2019 | Improvement of filler wire dilution using external oscillating magnetic field at full penetration hybrid laser-arc welding of thick materials
Üstündag, Ömer; Avilov, Vjaceslav; Gumenyuk, Andrey; Rethmeier, Michael | Journal Article |
| 2019 | Improvement of numerical simulation model setup and calculation time in additive manufacturing-laser-metal-deposition components with an advanced modelling strategy
Biegler, Max; Khazan, Pavel; Gatzen, Marius; Rethmeier, Michael | Conference Paper |
| 2019 | In-Situ-Kraftmessung bei variablen Werkzeugwinkeln
Uhlmann, Eckart; Uhlemann, Sebastian; Kochan, Jaroslaw | Journal Article |
| 2019 | In-Situ-Kraftmessung bei variablen Werkzeugwinkeln
Uhlmann, Eckart; Uhlemann, Sebastian; Kochan, Jaroslaw | Journal Article |
| 2019 | Increasing resource efficiency with an engineering decision support system for comparison of product design variants
Buchert, Tom; Ko, Nathanael; Graf, Roberta; Vollmer, Thomas; Alkhayat, Moritz; Brandenburg, Elisabeth; Stark, Rainer; Klocke, Fritz; Leistner, Philip; Schleifenbaum, Johannes Henrich | Journal Article |
| 2019 | Increasing the productivity and quality of flute grinding processes through the use of layered grinding wheels
Uhlmann, E.; Schroer, N.; Muthulingam, A.; Gulzow, B. | Journal Article, Conference Paper |
| 2019 | Integrating model checking and model based testing for industrial software development
Villani, E.; Pontes, R.P.; Coracini, G.K.; Ambrosio, A.M. | Journal Article |
| 2019 | Integration of Active Pharmaceutical Ingredient production into a pharmaceutical Lean Learning Factory
Petrusch, N.; Sieckmann, F.; Menn, J.P.; Kohl, H. | Journal Article, Conference Paper |
| 2019 | Interaction of tool and workpiece in ultrasonic-assisted grinding of high performance ceramics
Uhlmann, E.; Bruckhoff, J. | Journal Article, Conference Paper |
| 2019 | Introducing Product Service System Architectures for realizing Circular Economy
Halstenberg, F.A.; Stark, R. | Journal Article |
| 2019 | Investigation of liquid metal embrittlement of dual phase steel joints by electro-thermomechanical spot-welding simulation
Frei, Julian; Biegler, Max; Rethmeier, Michael; Böhne, Christoph; Meschut, Gerson | Journal Article |
| 2019 | Investigation of the mechanical properties of single-pass hybrid laser-arc welded thick X120 pipeline steel plates
Üstündag, Ömer; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael | Conference Paper |
| 2019 | Künstliche Intelligenz zum Schutz sicherheitskritischer Energie-Infrastrukturen
Klein, M.; Thiele, Gregor; Krüger, J. | Journal Article |
| 2019 | Laser Welding of SLM-Manufactured Tubes Made of IN625 and IN718
Jokisch, Torsten; Marko, Angelina; Gook, Sergej; Üstündag, Ömer; Gumenyuk, Andrey; Rethmeier, Michael | Journal Article |
| 2019 | Laserhybridschweißen von dickwandigen Stählen mit elektromagnetischer Schmelzbadunterstützung
Gumenyuk, Andrey; Üstündag, Ömer; Gook, Sergej; Rethmeier, Michael | Conference Paper |
| 2019 | Lean-Methoden und ISO 9001:2015 - Geht das zusammen?
Kohl, Holger; Neumann, Konstantin | Journal Article |
| 2019 | Leveraging circular economy through a methodology for smart service systems engineering
Halstenberg, F.A.; Lindow, K.; Stark, R. | Journal Article |
| 2019 | Liquid Metal Embrittlement of Advanced High Strength Steels during Resistance Spot Welding
Frei, Julian
: Krüger, J.; Rethmeier, M.; Jüttner, S. | Dissertation |
| 2019 | Low heat input gas metal arc welding for dissimilar metal weld overlays part III: Hydrogen-assisted cracking susceptibility
Frei, Julian; Alexandrov, Boian T.; Rethmeier, Michael | Journal Article |
| 2019 | Mechanical properties characterization of resistance spot welded DP1000 steel under uniaxial tensile tests
Javaheri, E.; Pittner, A.; Graf, B.; Rethmeier, M. | Journal Article |
| 2019 | Mechanical Properties of Single-pass Hybrid Laser Arc Welded 25 mm Thick-walled Structures Made of Fine-grained Structural Steel
Üstündag, Ömer; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael | Journal Article, Conference Paper |
| 2019 | Merkmalbasiertes Nutzerunterstützungssystem für die Erfassung von Bauteilen mittels industrieller Computertomographie
Sawczyn, Nikolas
: Hilgenberg, K.; Uhlmann, Eckart; Karpuschewski, B. | Dissertation |
| 2019 | Microstructure of Inconel 718 parts with constant mass energy input manufactured with direct energy deposition
Petrat, Torsten; Brunner-Schwer, Christian; Graf, Benjamin; Rethmeier, Michael | Journal Article, Conference Paper |
| 2019 | Mikrostrukturierte CVD-Diamant-Werkzeuge
Bachmann, H.; Meier, P.; Uhlmann, E.; Schröter, D. | Journal Article |
| 2019 | Modelling of Abrasive Water Jet Cutting with Controlled Depth for Near-Net-Shape Fabrication
Uhlmann, E.; Männel, C. | Journal Article, Conference Paper |
| 2019 | Modelling of brushing processes
Sommerfeld, C.; Uhlmann, E.; Hoyer, A. | Conference Paper |
| 2019 | Multi level network management - A method for managing inter-organizational innovation networks
Cap, J.-P.; Blaich, E.; Kohl, H.; Raesfeld, A. von; Harms, R.; Will, M. | Journal Article |
| 2019 | Niobcarbid statt Wolframcarbid Alternativer Schneidstoff in der Drehbearbeitung
Kropidlowski, K.; Uhlmann, E.; Woydt, M.; Theiler, G.; Gradt, T. | Journal Article |
| 2019 | Nonparametric Inverse Dynamic Models for Multimodal Interactive Robots
Haninger, Kevin; Tomizuka, Masayoshi | Report |
| 2019 | Numerical and experimental investigation of thermo-fluid flow and element transport in electromagnetic stirring enhanced wire feed laser beam welding
Meng, X.; Artinov, A.; Bachmann, M.; Rethmeier, M. | Journal Article |
| 2019 | Numerische Simulation einer AM-Prozesskette im DED Auftragschweißen
El-Sari, Bassel; Biegler, Max; Graf, Benjamin; Rethmeier, Michael | Conference Paper |
| 2019 | On the search for the origin of the bulge effect in high power laser beam welding
Artinov, A.; Bakir, N.; Bachmann, M.; Gumenyuk, A.; Na, S.-J.; Rethmeier, M. | Journal Article |
| 2019 | Ortsabhängiges Verschleißmodell für das Doppelseitenplanschleifen mit Planetenkinematik
List, Michael
: Rethmeier, M.; Uhlmann, E.; Klocke, F. | Dissertation |
| 2019 | Pocket milling of composite fibre-reinforced polymer using industrial robot
Melo, E.G. de; Klein, T.B.; Reinkober, S.; Gomes, J.D.O.; Uhlmann, E. | Journal Article, Conference Paper |
| 2019 | Point Pair Feature Matching: Evaluating Methods to Detect Simple Shapes
Ziegler, M.; Rudorfer, M.; Kroischke, X.; Krone, S.; Krüger, J. | Conference Paper |
| 2019 | Prediction of the initial fatigue crack location of automatically welded tubular joints for jacket support structures
Schaumann, P.; Schürmann, K.; Pittner, A.; Rethmeier, M. | Conference Paper |
| 2019 | A Process Model for Enhancing Digital Assistance in Knowledge-Based Maintenance
Kovacs, Klaudia; Ansari, Fazel; Geisert, Claudio; Uhlmann, E.; Glawar, Robert; Sihn, Wilfried | Conference Paper |
| 2019 | Profilverschleißreduzierung beim Planschleifen
Lichtschlag, L.; Uhlmann, E. | Journal Article |
| 2019 | Prototyping von Produkt-Service Systemen und Smart Services in der Konzeptphase des Entwicklungsprozesses
Exner, Konrad
: Jochem, Roland; Stark, Rainer; Meier, Horst | Dissertation |
| 2019 | Qualitätskriterien für den Datenfluss im Advanced System Engineering
Müller, Helena; Riedelsheimer, Theresa; Lünnemann, Pascal; Blüher, Till; Stark, Rainer | Conference Paper |
| 2019 | Reale Daten für Simulationen im digitalen Zwilling
Chemnitz, Moritz; Heimann, Oliver; Vick, A. | Journal Article |
| 2019 | Reconfiguring machine tool behavior via smart building block systems
Uhlmann, E.; Peukert, B. | Journal Article, Conference Paper |
| 2019 | Reifegradmodelle in der Produktentwicklung
Randermann, M.; Blüher, T.; Jochem, R.; Stark, R. | Journal Article |
| 2019 | Requirements for a methodology for the analysis and assessment of technological capability in research and technology organizations
Hecklau, F.; Kidschun, F.; Kohl, H.; Tominaj, S. | Conference Paper |
| 2019 | Resistance spot welding under external load for evaluation of LME susceptibility of zinc coated advanced high strength steel sheets
Frei, Julian; Biegler, Max; Rethmeier, Michael | Conference Paper |
| 2019 | Safe rendering of high impedance on a series-elastic actuator with disturbance observer-based torque control
Haninger, Kevin; Asignacion, Agner; Oh, Sehoon | Report |
| 2019 | Smart Cyber-Physical System applications in production and logistics: Special issue editorial
Ilie-Zudor, E.; Preuveneers, D.; Ekárt, A.; Hohwieler, E. | Journal Article |
| 2019 | Smart Industrial Products - Smarte Produkte und ihr Einfluss auf Geschäftsmodelle, Zusammenarbeit, Portfolios und Infrastrukturen
Lünnemann, Pascal; Wang, Wei Min; Lindow, Kai
: Müller, Patrick (Hrsg.); Lindow, Kai (Hrsg.); Gregorzik, Stefan (Hrsg.); Stark, Rainer (Hrsg.) | Study |
| 2019 | Study on the feasibility of modelling notations for integrated Product-Service Systems Engineering
Halstenberg, F.A.; Stark, R. | Journal Article, Conference Paper |
| 2019 | Sustainability Reporting in German Manufacturing SMEs
Steinhöfel, Erik; Galeitzke, Mila; Kohl, Holger; Orth, Ronald | Journal Article, Conference Paper |
| 2019 | Symbiotic human-robot collaborative assembly
Wang, L.; Gao, R.; Vancza, J.; Krüger, J.; Wang, X.V.; Makris, S.; Chryssolouris, G. | Journal Article |
| 2019 | System zur wenigstens bereichsweisen Regelung einer Temperatur eines Industrieroboters und Verfahren zum Erhöhen der Arbeitsgenauigkeit eines Industrieroboters
Uhlmann, Eckart; Reinkober, Sascha; Lenz, Frederik | Patent |
| 2019 | Systematische Methodenanwendung im dynamischen Qualitätsmanagement bei KMU
Schober, Johannes
: Krüger, Jörg; Jochem, Roland | Dissertation |
| 2019 | Thermal and technological aspects of double face grinding of Al2O3 ceramic materials
Deja, M.; List, M.; Lichtschlag, L.; Uhlmann, E. | Journal Article |
| 2019 | Tool wear modelling using micro tool diameter reduction for micro-end-milling of tool steel H13
Manso, C.S.; Thom, S.; Uhlmann, E.; Assis, C.L.F de; Conte, E.G del | Journal Article |
| 2019 | Towards Learning 3d Object Detection and 6d Pose Estimation from Synthetic Data
Rudorfer, M.; Neumann, L.; Krüger, J. | Conference Paper |
| 2019 | Use of Digital Twins in Additive Manufacturing Development and Production
Bergmann, André; Lindow, Kai | Abstract |
| 2019 | Variable-Latency Networked P-PI and MPC Controller Performance for Industrial Robots
Vick, Axel; Kilinc, Ali; Guhl, Jan | Conference Paper |
| 2019 | Verbundprojekt SmartStream: Intelligente Bearbeitung durch die Verwendung schaltbarer Fluide
Schmiedel, C.; Bierwisch, C.; Uhlmann, E.; Menzel, P.; Mohseni-Mofidi, S.; Breinlinger, T.; Nutto, C. | Conference Paper |
| 2019 | Verfahren zur kamerabasierten Instrumentennavigation am Beispiel der HNO-Chirurgie
Katanacho, Manuel
: Krüger, Jörg; Uhlmann, Eckart; Wittenberg, Thomas | Dissertation |
| 2019 | Vermeidung von Schweißimperfektionen im Überlappbereich bei laserstrahlhybrid-geschweißten Rundnähten
Gook, Sergej; Üstündag, Ömer; Gumenyuk, Andrey; Rethmeier, Michael | Conference Paper |
| 2019 | Vernetzte Transportroboter in der Fabriklogistik
Chemnitz, Moritz; Vick, Axel | Journal Article |
| 2019 | What dynamics should impedance-controlled robots render?
Haninger, Kevin; Surdilovic, Dragoljub; Bastidas Cruz, Arturo | Conference Paper |
| 2019 | Zusammenfassung und Ausblick
Chemnitz, Moritz | Book Article |
| 2018 | 3D laser metal deposition: Process steps for additive manufacturing
Graf, Benjamin; Marko, Angelina; Petrat, Torsten; Gumenyuk, Andrey; Rethmeier, Michael | Journal Article |
| 2018 | 3D-Vorkonturierung mittels Wasserabrasivstrahl
Uhlmann, E.; Männel, C. | Journal Article |
| 2018 | Affordance Based Approach to Automatic Program Generation for Industrial Robots in Manufacturing
Heimann, Oliver; Krüger, Jörg | Journal Article, Conference Paper |
| 2018 | Anwendungsfälle
Kind, Simon; Rehfeld, Ingolf; Schmidt, Jonas; Geiger, Andreas; Kirsch, Lukas | Book Article |
| 2018 | Anwendungsszenario und Evaluierung des ViB-SHP-Ansatzes
Blume, Claas; Kind, Simon; Lünnemann, Pascal | Book Article |
| 2018 | Application of additive manufactured tungsten carbide tool electrodes in EDM
Uhlmann, Eckart; Bergmann, André; Bolz, Robert; Gridin, Witalij | Journal Article, Conference Paper |
| 2018 | Application of Micro Structured, Boron Doped CVD-diamond as μEDM Tool Electrodes
Uhlmann, Eckart; Oberschmidt, Dirk; Bolz, Robert | Journal Article, Conference Paper |
| 2018 | Artefaktkorrektur für die Computertomographie
Uhlmann, Eckart; Polte, Julian; Melnik, Steffen | Journal Article |
| 2018 | Assessing the predictive capability of numerical additive manufacturing simulations via in-situ distortion measurements on a LMD component during build-up
Biegler, Max; Graf, Benjamin; Rethmeier, Michael | Journal Article, Conference Paper |
| 2018 | Assistenzbasierte virtuelle 2,5-D-Rekonstruktion von Kulturgut
Schneider, Jan; Nickolay, Bertram | Journal Article |
| 2018 | Aufbau von VR Trainingsumgebungen aus Daten der Virtuellen Produktentstehung
Geiger, Andreas; Stark, Rainer | Journal Article |
| 2018 | Augmented Reality im Qualitätsmanagement in der Produktentstehung - Chancen und Risiken durch den Wandel der Industrie 4.0
Heinze, Adrian | Master Thesis |
| 2018 | Automatic detection of field-grown cucumbers for robotic harvesting
Fernández, R.; Montes, H.; Surdilovic, J.; Surdilovic, D.; Gonzalez-De-Santos, P.; Armada, M. | Journal Article |
| 2018 | Automatisierte Fertigung von Hohlprofilknoten für Jacket-Gründungsstrukturen
Schaumann, P.; Rethmeier, M.; Schürmann, K.; Pittner, A.; Dänekas, C.; Schippereit, C. | Journal Article |
| 2018 | Beam Hardening Correction Using Cone Beam Consistency Conditions
Abdurahman, S.; Frysch, R.; Bismark, R.; Melnik, S.; Beuing, O.; Rose, G. | Journal Article |
| 2018 | Benchmarking-unterstützte Standortplanung von industriellen Wertschöpfungsprozessen
Zhou, Xing
: Kohl, Holger | Dissertation |
| 2018 | Benötigte neue Jobrollen/Engineering Disziplinen
Lünnemann, Pascal | Book Article |
| 2018 | Boron-doped CVD diamond micro-end mills for machining titanium
Uhlmann, Eckart; Polte, Mitchel; Polte, Julian; Oberschmidt, Dirk | Conference Paper |
| 2018 | Build-up strategies for additive manufacturing of three dimensional Ti-6Al-4V-parts produced by laser metal deposition
Spranger, Felix; Graf, Benjamin; Schuch, Michael; Hilgenberg, Kai; Rethmeier, Michael | Journal Article |
| 2018 | Build-up strategies for laser metal deposition in additive manufacturing
Petrat, Torsten; Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael | Conference Paper |
| 2018 | Build-up strategies for temperature control using laser metal deposition for additive manufacturing
Petrat, Torsten; Winterkorn, René; Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael | Journal Article |
| 2018 | Building the ENRICH Community - Common European Network as Advantage for ENRICH in Brazil, China and in the USA
Haunschild, Johanna; Orth, Ronald; Pereira Ferreira, Romulo | Conference Paper |
| 2018 | Camera-based instrument navigation in ENT-surgery
Katanacho, Manuel; Uhlmann, Eckart | Conference Paper |
| 2018 | CareJack - die intelligente Softorthese zur Ergonomieunterstützung
Kuschan, Jan; Schmidt, Henning; Krüger, Jörg | Journal Article |
| 2018 | Cloud-based active disturbance rejection control for industrial robots
Briese, Clemens; Vick, Axel; Krüger, Jörg | Conference Paper |
| 2018 | Cluster identification of sensor data for predictive maintenance in a Selective Laser Melting machine tool
Uhlmann, E.; Pastl Pontes, R.; Geisert, C.; Hohwieler, E. | Journal Article, Conference Paper |
| 2018 | Comparison between GTA and laser beam welding of 9% Ni steel for critical cryogenic applications
El-Batahgy, A-M.; Gumenyuk, A.; Gook, S.; Rethmeier, M. | Journal Article |
| 2018 | Concept and architecture for programming industrial robots using augmented reality with mobile devices like microsoft HoloLens
Guhl, J.; Nguyen, S.T.; Kruger, J. | Conference Paper |
| 2018 | Concept of sustainable data for a selective laser melting machine
Uhlmann, Eckart; Pastl Pontes, Rodrigo; Laghmouchi, Abdelhakim; Bergmann, André | Journal Article, Conference Paper |
| 2018 | Corporate Governance: The Evaluation Based Approach to the Governance and Business Models of the EPIC Centre of Excellence in Production Informatics and Control (EPIC Coe)
Monostori, Laszlo; Kadar, Botond; Nick, Gabor; Pfeiffer, Andras; Vargedo, Tamas; Hecklau, Fabian | Conference Paper |
| 2018 | Correction to: Execution and evaluation of enterprise models in IEM/MO2GO based on Petri net
Jin, G.; Jäkel, F.-W. | Journal Article |
| 2018 | Das cyberphysische Produktmodell
Lünnemann, Pascal; Kirsch, Lucas | Book Article |
| 2018 | Data-driven business model a methodology to develop smart services
Exner, K.; Stark, R.; Kim, J.Y. | Conference Paper |
| 2018 | Design of neural network arc sensor for gap width detection in automated narrow gap GMAW
Fabry, C.; Pittner, A.; Rethmeier, M. | Journal Article |
| 2018 | Design Simulation of Components made from Diamond-Ceramic Composites for Deep-Sea Mining
Uhlmann, Eckart; Uhlemann, Sebastian; Borsoi Klein, Tiago; Schmiedel, Christian | Poster |
| 2018 | Developing Regional Intellectual Capital through Future Workshops. A Case Study from Germany
Orth, Ronald; Federwisch, Tobias; Jordan, Kristina | Conference Paper |
| 2018 | Development of a Methodology to Develop Venture Capital Strategies in Applied R&D Networks
Cap, Jan-Patrick | Conference Paper |
| 2018 | Diamond burnishing for mould and die industry
Uhlmann, Eckart; Oberschmidt, Dirk; Guhde, Sebastian; Polte, Mitchel; Polte, Julian | Conference Paper |
| 2018 | Dienstebasierte Integration objektspezifischer Lageerkennungsalgorithmen am Beispiel eines roboterbasierten Greifszenarios
Rudorfer, Martin; Chemnitz, Moritz | Book Article |
| 2018 | Digitale Zwillinge - Entwicklungen im Maschinenbau
Stark, Rainer; Halstenberg, Friedrich A. | Journal Article |
| 2018 | Distributed Industrial Robot Control using Environment Perception and Parallel Path Planning Cloud Services
Wassermann, Jonas; Vonasek, Vojtech; Vick, Axel | Conference Paper |
| 2018 | Distributed Motion Planning for Industrial Random Bin Picking
Vonasek, Vojtech; Vick, Axel; Krüger, Jörg | Journal Article, Conference Paper |
| 2018 | Ductile machining of brittle materials for manufacturing micro-optic components
Uhlmann, Eckart; Oberschmidt, Dirk; Rolon, D.A.; Kühne, S.; Jagodzinski, M.; Malcher, M. | Conference Paper |
| 2018 | Dynamic Analysis of Abrasive Filaments in Contact with Different Workpiece Geometries
Uhlmann, E.; Sommerfeld, C. | Journal Article |
| 2018 | Effect of laser-beam and hybrid-laser-arc welding parameters and filler metal on microstructure and mechanical properties of thick heat-treated steel X8Ni9+QT640 for cryogenic service
El-Batahgy, A-M.; Gook, S.; Gumenyuk, A.; Rethmeier, M. | Conference Paper |
| 2018 | The Effects of Laser Microtexturing of Biomedical Grade 5 Ti-6Al-4V Dental Implants (Abutment) on Biofilm Formation
Uhlmann, Eckart; Schweitzer, Luiz; Kieburg, Heinz; Spielvogel, Anja; Huth-Herms, Katrin | Journal Article, Conference Paper |
| 2018 | An Efficiency-Oriented Batch Reduction Procedure for Hazardous Material
Halstenberg, Friedrich A.; Chen, Eleanor Y.; Rumpel, Guido; Schneider, Ralph; Stark, Rainer | Journal Article, Conference Paper |
| 2018 | Einsatzverhalten und Leistungsbedarfe unterschiedlicher Kühlungsmethoden beim Außen-Längs-Runddrehen
Fürstmann, Paul
: Krüger, J.; Uhlmann, Eckart; Klocke, F. | Dissertation |
| 2018 | Electro-discharge drilling with MP-based carbon fibre electrodes
Uhlmann, Eckart; Perfilov, Ivan; Yabroudi, S.; Schweitzer, Luiz; Polte, Mitchel | Conference Paper |
| 2018 | Embedding electronics into additive manufactured components using laser metal deposition and selective laser melting
Petrat, Torsten; Kersting, Robert; Graf, Benjamin; Rethmeier, Michael | Journal Article, Conference Paper |
| 2018 | Enabling Human-Robot-Interaction via Virtual and Augmented Reality in Distributed Control Systems
Guhl, Jan; Hügle, Johannes; Krüger, Jörg | Journal Article, Conference Paper |
| 2018 | Endkonturnahe Schruppbearbeitung von Titanaluminid mittels Wasserabrasivstrahlen mit kontrollierter Schnitttiefe
Faltin, Fabian
: Kohl, Holger; Uhlmann, E.; Abele, E. | Dissertation |
| 2018 | EnerSEC. Reaktive IT-Sicherheitsüberwachung automatisierter technischer Anlagen in sicherheitskritischen Energie-Infrastrukturen
Klein, Max; Thiele, Gregor; Horn, Christian; Krüger, Jörg | Poster |
| 2018 | Engineering activities: Considering value creation from a holistic perspective
Lünnemann, P.; Stark, R.; Wang, W.M.; Manteca, P.I. | Conference Paper |
| 2018 | ENRICH - European Network of Research and Innovation Centres and Hubs
Orth, Ronald; Haunschild, Johanna | Poster |
| 2018 | ENRICH Community Building - Development of a Decision Support Tool for Membership Selection
Haunschild, Johanna; Kreiling, Laura | Conference Paper |
| 2018 | Enterprise Interoperability
: Zelm, Martin (Ed.); Jaekel, Frank-Walter (Ed.); Doumeingts, Guy (Ed.); Wollschlaeger, Martin (Ed.) | Conference Proceedings |
| 2018 | Enterprise interoperability management and artifacts
Jäkel, Frank-Walter | Conference Paper |
| 2018 | Entwicklung eines hochauflösenden wellenlängendispersiven Spektrometers für den Spektralbereich harter Röntgenstrahlung
Holfelder, Ina
: Oberschmidt, D.; Uhlmann, Eckart; Beckhoff, B. | Dissertation |
| 2018 | Entwicklung eines methodenbasierten Modells zur Messung und Bewertung der Produktivität von Dienstleistungsprozessen
Amini, Ahmad Schafiq
: Krüger, J.; Jochem, R.; Woll, R.; Herrmann, J. | Dissertation |
| 2018 | Entwicklung eines Validierungsframeworks zur erlebbaren Absicherung von Fahrerassistenzsystemen
Auricht, Maik
: Göhlich, D.; Stark, Rainer; Bernasch, J. | Dissertation |
| 2018 | Entwicklung und Aufbau eines Probenhalters für die Emissionsgradmessung an semitransparenten Materialien
Gieseler, J.; Monte, C.; Adibekyan, A.; Hollandt, J.; Kersting, R. | Journal Article |
| 2018 | Equivalent heat source approach in a 3D transient heat transfer simulation of full-penetration high power laser beam welding of thick metal plates
Artinov, A.; Bachmann, M.; Rethmeier, M. | Journal Article |
| 2018 | Erhöhung der Genauigkeit beim Fräsen mit Industrierobotern
Uhlmann, E.; Reinkober, S.; Hollerbach, T. | Journal Article |
| 2018 | Erhöhung der Genauigkeit beim Fräsen mit Industrierobotern durch abtriebsseitige Winkelmesssysteme
Uhlmann, Eckart; Reinkober, Sascha; Hollerbach, Tobias | Journal Article |
| 2018 | Evaluation Model for the Derivation of a Sustainable Digitisation Strategy
Knothe, T.; Oertwig, N.; Obenaus, M.; Butschek, P. | Conference Paper |
| 2018 | Evaluation of Business Models - A Systematic Literature Review
Steinhöfel, Erik; Hussinki, Henri; Bornemann, Manfred | Conference Paper |
| 2018 | Evaluierung
Blume, Claas; Lünnemann, Pascal | Book Article |
| 2018 | Execution and evaluation of enterprise models in IEM/MO2GO based on Petri net
Jin, Guangying; Jäkel, Frank-Walter | Journal Article |
| 2018 | Facts & Figures: Get to know Brazil and its innovative Industries
Haunschild, Johanna; Pereira Ferreira, Romulo; Tsog, Sara | Report |
| 2018 | Facts & Figures: Get to know the European Union and its Innovative Industries
Haunschild, Johanna; Pereira Ferreira, Romulo | Report |
| 2018 | Fatos & Figuras: Conheça a União Europeia e suas indústrias inovadoras
Haunschild, Johanna; Pereira Ferreira, Romulo | Report |
| 2018 | Feedback to Design with Digital Lifecycle-Twins - literature review and concept presentation
Riedelsheimer, Theresa; Lindow, Kai; Stark, Rainer | Conference Paper |
| 2018 | Feinbohrspindel für die Trockenfunkenerosion
Uhlmann, Eckart; Yabroudi, S.; Polte, Mitchel | Journal Article |
| 2018 | Finishbearbeitung technischer Oberflächen aus gehärtetem Stahl unter Verwendung von Rundbürsten mit Schleiffilamenten
Hochschild, Leif
: Kraft, Marc; Uhlmann, Eckart; Klocke, Fritz | Dissertation |
| 2018 | Finite element analysis of in-situ distortion and bulging for an arbitrarily curved additive manufacturing directed energy deposition geometry
Biegler, Max; Marko, Angelina; Graf, Benjamin; Rethmeier, Michael | Journal Article |
| 2018 | The four-step approach for the creation of the HR Concept for the EPIC Centre of Excellence in Production Informatics and Control (EPIC CoE)
Hecklau, Fabian; Orth, Ronald; Kidschun, Florian; Nick, Gabor | Conference Paper |
| 2018 | Fräsbearbeitung von Nickelbasislegierungen mit Industrierobotern.
Reinkober, Sascha
: Uhlmann, Eckart | Dissertation |
| 2018 | Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik. Jahresbericht 2017/2018
| Annual Report |
| 2018 | Full penetration hybrid laser arc welding of up to 28 mm thick S355 plates using electromagnetic weld pool support
Üstündag, Ömer; Avilov, Vjaceslav; Gumenyuk, Andrey; Rethmeier, Michael | Conference Paper |
| 2018 | Futur 3.2018
: Uhlmann, Eckart | Journal Issue |
| 2018 | Ganzheitliche Planung der Qualitätsorganisation in produzierenden Unternehmen
Behmer, Falk Johannes
: Krüger, J.; Jochem, Roland; Woll, R. | Dissertation |
| 2018 | Ganzheitliche Produktionssysteme in der Pharmaindustrie
Sieckmann, F.; Helm, R.; Kohl, H.; Wissel, S. | Journal Article |
| 2018 | Gestaltungsaspekte immersiver Fahrsimulationsumgebungen
Reich, Diana
: Stark, Rainer | Dissertation |
| 2018 | Gesture based robot programming using process knowledge
Heimann, O.; Hügle, J.; Krüger, J. | Conference Paper |
| 2018 | Grinding of high performance materials with spherical mounted points
Koprowski, Stefan
: Kohl, H.; Uhlmann, Eckart; Weingaertner, W.L. | Dissertation |
| 2018 | Hand Shape Recognition Using Very Deep Convolutional Neural Networks
Rakowski, Alexander; Wandzik, Lukasz | Conference Paper |
| 2018 | Hard material small-batch industrial machining robot
Brunete, A.; Gambao, E.; Koskinen, J.; Heikkilä, T.; Kaldestad, K.B.; Tyapin, I.; Hovland, G.; Surdilovic, D.; Hernando, M.; Bottero, A.; Anton, S. | Journal Article |
| 2018 | Helical electrodes for improved flushing conditions in drilling EDM of MAR-M247
Uhlmann, Eckart; Perfilov, Ivan; Yabroudi, S.; Schweitzer, Luiz; Polte, Mitchel | Conference Paper |
| 2018 | Heutige Defizite industrieller Anwendung
Lünnemann, Pascal | Book Article |
| 2018 | Hochleistungskeramik effizienter schleifen
Borsoi Klein, Tiago; Korpowski, Stefan | Journal Article |
| 2018 | Holo Pick'n'Place
Rudorfer, M.; Guhl, J.; Hoffmann, P.; Krüger, J. | Conference Paper |
| 2018 | Human robot collaboration - using kinect v2 for ISO/TS 15066 speed and separation monitoring
Rosenstrauch, Martin J.; Pannen, Tessa J.; Krüger, Jörg | Journal Article, Conference Paper |
| 2018 | Hybrid laser arc welding of 25 mm thick materials using electromagnetic weld pool support
Üstündag, Ömer; Avilov, Vjaceslav; Gumenyuk, Andrey; Rethmeier, Michael | Conference Paper |
| 2018 | Hybrid laser-arc welding of thick-walled ferromagnetic steels with electromagnetic weld pool support
Üstündag, Ömer; Fritzsche, André; Avilov, Vjaceslav; Rethmeier, Michael; Gumenyuk, Andrey | Journal Article |
| 2018 | Hybrid Prototype-in-the-Loop
Buchholz, Christian; Kind, Simon; Blume, Claas; Enin, Alexey; Stark, Rainer | Journal Article |
| 2018 | Hybrid prototype-in-the-loop
Buchholz, C.; Kind, S.; Blume, C.; Enin, A.; Stark, R. | Journal Article |
| 2018 | Hybrides Auftragschweißen: Potentiale des laserunterstützten Plasma-Pulver-Auftragschweißens (PTA)
Brunner-Schwer, Christian; Graf, Benjamin; Rethmeier, Michael; Schreiber, Frank | Conference Paper |
| 2018 | Identification of Human Dynamics in User-Led Physical Human Robot Environment Interaction
Haninger, Kevin; Surdilovic, Dragoljub | Conference Paper |
| 2018 | Implementation of lean production systems in small and medium-sized pharmaceutical enterprises
Sieckmann, Felix; Ngoc, Hien Nguyen; Helm, René; Kohl, Holger | Journal Article, Conference Paper |
| 2018 | Improved degassing in laser beam welding of aluminum die casting by an electromagnetic field
Fritzsche, A.; Hilgenberg, K.; Teichmann, F.; Pries, H.; Dilger, K.; Rethmeier, M. | Journal Article |
| 2018 | Improvement of Defect Detectability in Machine Tools Using Sensor-based Condition Monitoring Applications
Demilia, G.; Gaspari, A.; Hohwieler, E.; Laghmouchi, A.; Uhlmann, E. | Journal Article, Conference Paper |
| 2018 | In-process quality assurance for selective laser melting through online generation of key performance indicators in context of industrie 4.0
Pastl Pontes, Rodrigo; Uhlmann, Eckart | Book Article |
| 2018 | In-situ distortions in LMD additive manufacturing walls can be measured with digital image correlation and predicted using numerical simulations
Biegler, Max; Graf, Benjamin; Rethmeier, Michael | Journal Article |
| 2018 | Industrial Image Processing Applications as Orchestration of Web Services
Rudorfer, M.; Krüger, J. | Journal Article, Conference Paper |
| 2018 | Industrielle Netzwerkanwendungen in der Virtuellen Produktentstehung
Stark, Rainer; Riedelsheimer, Theresa | Journal Article |
| 2018 | Industry 4.0 as enabler for a sustainable development
Stock, Tim; Obenaus, Michael; Kunz, Sascha; Kohl, Holger | Journal Article |
| 2018 | Influence of cutting edge micro-geometry in micro-milling of copper alloys with reduced lead content
Uhlmann, Eckart; Kuche, Yves; Polte, Julian; Polte, Mitchel | Journal Article, Conference Paper |
| 2018 | Influence of heat input and preheating on the cooling rate, microstructure and mechanical properties at the hybrid laser-arc welding of API 5L X80 steel
Turichin, G.; Kuznetsov, M.; Pozdnyakov, A.; Gook, S.; Gumenyuk, A.; Rethmeier, M. | Journal Article, Conference Paper |
| 2018 | Influence of tilt and lead angles on 5-axis grinding with spherical mounted points
Koprowski, S.; Uhlmann, E.; Weingaertner, W. | Journal Article |
| 2018 | International Innovation Partnerships by ENRICH in Brazil
Will, Markus; Haunschild, Johanna | Presentation |
| 2018 | Intuitive robot programming through environment perception, augmented reality simulation and automated program verification
Wassermann, Jonas; Vick, Axel; Krüger, Jörg | Journal Article, Conference Paper |
| 2018 | Intuitive Roboterprogrammierung per Fingerzeig
Heimann, Oliver; Hügle, Johannes | Journal Article |
| 2018 | Investigating challenges of a sustainable use of marine mineral resources
Kaluza, Andrea; Lindow, Kai; Stark, Rainer | Journal Article, Conference Paper |
| 2018 | Investigation of solidification cracking susceptibility during laser beam welding using an in-situ observation technique
Bakir, N.; Gumenyuk, A.; Rethmeier, M. | Journal Article |
| 2018 | IT-basiertes Werkzeug zur Datenflussanalyse im Entwicklungsumfeld
Riedelsheimer, Theresa; Lünnemann, Pascal; Wehking, Sebastian; Lindow, Kai | Journal Article |
| 2018 | IT-Systemarchitektur
Lünnemann, Pascal; Kirsch, Lucas; Kind, Simon; Becker, Waldemar; Könnecke, Konstantin; Zuchold, Jörg-Uwe | Book Article |
| 2018 | Knowledge in engineering design
Preidel, Maurice; Wang, Wei Min; Exner, Konrad; Stark, Rainer | Conference Paper |
| 2018 | Konstruktive Maßnahmen zur Reduzierung des thermischen Einflusses auf die Genauigkeit von Industrierobotern
Reinkober, Sascha; Mohnke, Christian | Journal Article |
| 2018 | Laser beam oscillation welding for automotive applications
Müller, A.; Goecke, S.F.; Rethmeier, M. | Journal Article |
| 2018 | Laser-plasma-cladding as a hybrid metal deposition-technology applying a SLM-produced copper plasma nozzle
Brunner-Schwer, Christian; Kersting, Robert; Graf, Benjamin; Rethmeier, Michael | Journal Article, Conference Paper |
| 2018 | Laser-Pulver-Auftragschweißen in der additiven Prozesskette für Legierungen aus dem Turbomaschinenbau
Graf, Benjamin
: Uhlmann, E.; Rethmeier, Michael; Schmidt, M. | Dissertation |
| 2018 | Learning Factory for Industry 4.0 to provide future skills beyond technical training
Schallock, Burkhard; Rybski, Christoffer; Jochem, Roland; Kohl, Holger | Journal Article, Conference Paper |
| 2018 | Learning process planning for special machinery assembly
Menn, Jan-Philipp; Sieckmann, Felix; Kohl, Holger; Seliger, Günther | Journal Article, Conference Paper |
| 2018 | Learnstruments: Learning-conducive artefacts to foster learning productivity in production engineering
Menn, Jan-Philipp; Muschard, Bernd; Schumacher, Bastian; Sieckmann, Felix; Kohl, Holger; Seliger, Günther | Journal Article |
| 2018 | Leichtbau für Triebwerke - Bearbeitung von Ceramic Matrix Composites
Borsoi Klein, Tiago | Journal Article |
| 2018 | Low heat input gas metal arc welding for dissimilar metal weld overlays part II: The transition zone
Frei, Julian; Alexandrov, Boian T.; Rethmeier, Michael | Journal Article |
| 2018 | Machine Tool and Technology for Manufacturing of Micro-structures by Micro Dry Electrical Discharge Milling
Uhlmann, E.; Perfilov, I. | Journal Article, Conference Paper |
| 2018 | Manufacturing and replication of sub-10 μm micro-bowls for biomedical sensor systems
Uhlmann, Eckart; Hein, Christoph; Polte, Mitchel; Polte, Julian; Dähne, L. | Conference Paper |
| 2018 | Manufacturing of carbide tools by Selective Laser Melting
Uhlmann, Eckart; Bergmann, André; Bolz, Robert | Journal Article, Conference Paper |
| 2018 | Maximization of operational workspace of a mobile manipulator system
Kalidindi, V.V.; Vick, A.; Krüger, J. | Conference Paper |
| 2018 | Methode zur Bestimmung spezifischer Kräfte durch Fräsversuche und Anwendung bei der Natursteinbearbeitung
Manthei, Marcel
: Kohl, H.; Uhlmann, Eckart; Denkena, B. | Dissertation |
| 2018 | Methodik zur integrierten virtuellen Auslegung und Absicherung flexibler Bauteile
Hofheinz, Nicolas
: Rethmeier, Michael; Stark, Rainer; Wartzack, Sandro; Schwenk, C. | Dissertation |
| 2018 | Methodology for the in-process evaluation of software-based process failures in Selective Laser Melting machine tools
Pastl Pontes, Rodrigo
: Krüger, Jörg; Uhlmann, Eckart; Gomes, Oliveira | Dissertation |
| 2018 | Micro formed holographic security features in steel
Uhlmann, Eckart; Schulze, Stephanie; Polte, Julian; Hein, Christoph; Matthiesen, Johannes; Böge, Manfred | Conference Paper |
| 2018 | Mikrobohren ohne flüssige Dielektrika
Uhlmann, Eckart; Yabroudi, S.; Polte, Mitchel | Journal Article |
| 2018 | Mikrofräswerkzeuge mit Schneiden aus cBN
Uhlmann, E.; Polte, J.; Polte, M.; Kuche, Y.; Wiesner, H. | Journal Article |
| 2018 | Model based, modular configuration of cyber physical systems for the information management on shop-floor
Jaekel, F.-W.; Torka, J.; Eppelein, M.; Schliephack, W.; Knothe, T. | Conference Paper |
| 2018 | Möglichkeiten der Bildverarbeitung für Additive Manufacturing Reparaturen
Schlüter, Marian | Presentation |
| 2018 | Morphing Detection Using a General-Purpose Face Recognition System
Wandzik, Lukasz; Kaeding, Gerald; Vicente-Garcia, Raul | Conference Paper |
| 2018 | Motion planning with motion primitives for industrial bin picking
Vonasek, V.; Vick, A.; Saska, M. | Conference Paper |
| 2018 | Multimodal Environment Dynamics for Interactive Robots
Haninger, Kevin; Surdilovic, Dragoljub | Conference Paper |
| 2018 | Neues Elektrodenkonzept verbessert Senkerodieren
Streckenbach, Jan; Uhlmann, Eckart; Wolf, Cora-Sophia; Börnstein, Julian; Polte, Mitchel | Journal Article |
| 2018 | Novel metrology to determine the critical strain conditions required for solidification cracking during laser welding of thin sheets
Bakir, N.; Pavlov, V.; Zavjalov, S.; Volvenko, S.; Gumenyuk, A.; Rethmeier, M. | Journal Article, Conference Paper |
| 2018 | Numerical simulation of the weld pool dynamics during pulsed laser welding using adapted heat source models
Lange, F.; Artinov, A.; Bachmann, M.; Rethmeier, M.; Hilgenberg, K. | Journal Article, Conference Paper |
| 2018 | Numerical simulation on the origin of solidification cracking in laser welded thick-walled structures
Bakir, N.; Artinov, A.; Gumenyuk, A.; Bachmann, M.; Rethmeier, M. | Journal Article |
| 2018 | Numerische Prozesssimulation zur Auslegung des Druckfließläppens am Beispiel additiv gefertigter Bauteile
Schmiedel, Christian
: Rethmeier, Michael; Uhlmann, Eckart; Abele, Eberhard | Dissertation |
| 2018 | Optimization with the evolution strategy by example of electrical-discharge drilling
Streckenbach, J.; Santibáñez Koref, I.; Rechenberg, I.; Uhlmann, E. | Conference Paper |
| 2018 | Optimized data integration for tracelinking in product development through the application of semantic web technologies
Woll, Robert
: Stark, Rainer | Dissertation |
| 2018 | Orbital hybrid laser arc welding using a high power fibre laser for pipeline construction
Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael | Journal Article |
| 2018 | Perspectives for International Engineering Education
Stock, Tim; Kohl, Holger | Journal Article, Conference Paper |
| 2018 | PKD-Glattdrückwerkzeuge für den Werkzeug- und Formenbau
Uhlmann, Eckart; Polte, Mitchel; Polte, Julian; Guhde, Sebastian; Kuche, Yves; Kappel, Thomas | Journal Article |
| 2018 | Porosity of LMD manufactured parts analyzed by Archmimedes method and CT
Marko, Angelina; Raute, Julius; Linaschke, Dorit; Graf, Benjamin; Rethmeier, Michael | Journal Article |
| 2018 | Potentials and limitations of simulation based artefact correction in computed tomography
Uhlmann, Eckart; Polte, Julian; Melnik, Steffen | Conference Paper |
| 2018 | PowerGrasp: Concept for a novel Soft-Robotic Arm Support System
Kuschan, Jan; Goppold, Jean-Paul; Schmidt, Henning; Krüger, Jörg | Conference Paper |
| 2018 | Präzise gestenbasierte Roboterprogrammierung
Heimann, Oliver; Hügle, Johannes; Krüger, Jörg | Book Article |
| 2018 | Prognose der Oberflächenbeschaffenheit für die additive Fertigung mittels Laser-Pulver-Auftragschweißen
Marko, Angelina; Petrat, Torsten; Graf, Benjamin; Rethmeier, Michael | Conference Paper |
| 2018 | A PSS maturity self-assessment tool
Exner, Konrad; Balder, Juliane; Stark, Rainer | Journal Article, Conference Paper |
| 2018 | Qualitätsmanagement in der Automobilindustrie und dessen Umsetzung an Produktionsstandorten in der Volksrepublik China unter Berücksichtigung kultur- und kooperationsbedingter Einflüsse
Linthe, Oliver
: Krüger, J.; Jochem, R.; Woll, R. | Dissertation |
| 2018 | Quantification and compensation of systematic errors in pressure measurements applied to oil pipelines
Thiele, Gregor; Liu, Martin; Chemnitz, Moritz; Krüger, Jörg | Conference Paper |
| 2018 | Registration of pre- and postoperative surface scans for pediatric neurosurgery
Katanacho, Manuel; Lack, John-Certus; Fehlhaber, Felix; Krüger, Jörg | Journal Article |
| 2018 | Robust Passivity and Passivity Relaxation for Impedance Control of Flexible-Joint Robots with Inner-Loop Torque Control
Haninger, Kevin; Tomizuka, Masayoshi | Journal Article |
| 2018 | Safe human robot collaboration - Operation area segmentation for dynamic adjustable distance monitoring
Rosenstrauch, Martin J.; Krüger, Jörg | Conference Paper |
| 2018 | Shop floor management systems in case of increasing process variation
Schliephack, Wolf | Conference Paper |
| 2018 | Smart Service Lebenszyklus
Exner, Konrad; Blüher, Till; Stark, Rainer | Journal Article |
| 2018 | SmartSensX. Ein Konzept für vernetzte tragbare Sensoren zur Anwendung in der Softrobotik und Mensch Maschine Interaktion
Hackbart, R.; Kostelnik, J.; Kuschan, Jan; Schmidt, Henning; Krüger, Jörg; Vieroth, R.; Lang, K.-D. | Conference Paper |
| 2018 | Smoothed Particle Hydrodynamics simulation of the machining process of Inconel 718
Uhlmann, E.; Barth, E. | Journal Article, Conference Paper |
| 2018 | Spannutschleifen von Hartmetall-Schaftwerkzeugen mit gradierten Schleifscheiben
Schröer, Nikolas
: Meyer, H.J.; Uhlmann, Eckart; Biermann, Dirk | Dissertation |
| 2018 | State of the Art Literature Analysis of Innovation Network Management Frameworks
Cap, Jan-Patrick | Conference Paper |
| 2018 | Strain-rate controlled Gleeble experiments to determine the stress-strain behavior of HSLA steel S960QL
Neubert, S.; Pittner, A.; Rethmeier, M. | Journal Article |
| 2018 | Strömungsschleifen von Turbinenschaufeln
Schmiedel, Christian | Journal Article |
| 2018 | Study of gap and misalignment tolerances at hybrid laser arc welding of thick-walled steel with electromagnetic weld pool support system
Üstündag, Ömer; Fritzsche, André; Avilov, Vjaceslav; Gumenyuk, Andrey; Rethmeier, Michael | Journal Article, Conference Paper |
| 2018 | A study on shielded metal arc welding of 9%Ni steel using non-conventional ferritic welding electrode for LNG facilities
Siayah, A.; El-Batahgy, A-M.; Khafagi, S.; Gumenyuk, A.; Gook, S.; Rethmeier, M. | Conference Paper |
| 2018 | Study on sustainability developments in industrial practice
Lindow, Kai; Kaluza, Andrea; Stark, Rainer | Journal Article, Conference Paper |
| 2018 | Study on the role of recondensation flux in high power laser welding by computational fluid dynamics simulations
Muhammad, S.; Han, S.-W.; Na, S.-J.; Gumenyuk, A.; Rethmeier, M. | Journal Article |
| 2018 | Susceptibility of electrolytically galvanized dual-phase steel sheets to liquid metal embrittlement during resistance spot welding
Frei, Julian; Rethmeier, Michael | Journal Article |
| 2018 | Sustainable Innovation in a Multi-University Master Course
Gladysz, Bartlomiej; Urgo, Marcello; Gaspari, Lorenzo; Pozzan, Giovanna; Stock, Tim; Haskins, Cecilia; Jarzebowska, Elzbieta; Kohl, Holger | Journal Article, Conference Paper |
| 2018 | Test of industrial Internet of Things. Opening the black box
Jaekel, Frank-Walter; Torka, Jan | Conference Paper |
| 2018 | Test services for interoperable and secure shop-floor IT application interfaces in OPC-UA
Jäkel, Frank-Walter; Wolff, Tobias; Hackel, Leonard | Conference Paper |
| 2018 | Trochoide Fräsbearbeitung mit Industrierobotern
Uhlmann, Eckart; Reinkober, Sascha; Hoffmann, Martin; Käpernick, Peer | Journal Article |
| 2018 | Trochoide Fräsbearbeitung mit Industrierobotern
Uhlmann, E.; Reinkober, S.; Hoffmann, M.; Käpernick, P. | Journal Article |
| 2018 | Trocken und rückstandsfrei CFK bearbeiten - Hochdruckstrahlschneiden mit flüssigem CO2
Uhlmann, Eckart; John, Patrick; Reinkober, Sascha | Journal Article |
| 2018 | Ultrapräzisionsverfahren zur Erhöhung der Güte abbildender Beugungsgitter
Kühne, Stefan
: Stark, Rainer; Uhlmann, Eckart; Brinksmeier, E. | Dissertation |
| 2018 | Understanding PLM and PLM customizing: A theoretical fundament for a conceptual approach
Venghaus, E.; Stark, R. | Conference Paper |
| 2018 | Uniformed approach for exchange of functional and behavior models for simulation using Functional Modelling Interface (FMI)
Wekerle, Timo; Stjepandic, Josip; Pfouga, Alain; Blume, Claas | Conference Paper |
| 2018 | Using OPC UA for Distributed Industrial Robot Control
Vick, Axel; Krüger, Jörg | Conference Paper |
| 2018 | Using Transitive Relations for Automatic Creation of Consistent Traceability in Model-based Systems Engineering
Sünnetcioglu, Atakan; Stark, Rainer | Journal Article, Conference Paper |
| 2018 | Validierung von AM-Laser-Metal-Deposition Simulationen mittels in-situ Verzugsmessungen an der aufgebauten Geometrie
Biegler, Max | Conference Paper |
| 2018 | Verschleißverhalten neuartiger Mikrofräswerkzeuge mit Schneiden aus CBN bei der Hartzerspanung
Uhlmann, Eckart; Polte, Julian; Polte, Mitchel; Kuche, Yves; Wiesner, Hagen Maximilian | Journal Article |
| 2018 | VIB-SHP - Virtuelle Inbetriebnahme für Industrie 4.0 zukunftssicher beherrschen
: Stark, Rainer (Hrsg.); Müller, Patrick (Hrsg.); Grosser, Hendrik (Hrsg.) | Report |
| 2018 | ViB-SHP-Entwicklungsprozess mit Baukästen
Lünnemann, Pascal; Mathes, Bernhard | Book Article |
| 2018 | ViB-SHP-Konzept in den Dimensionen des Engineering Operating System
Lünnemann, Pascal | Book Article |
| 2018 | Virtualization technologies in product development
Krems, S.; Reich, D.; Stark, R. | Conference Paper |
| 2018 | Vision-based Identification Service for Remanufacturing Sorting
Schlüter, Marian; Niebuhr, Carsten; Lehr, Jan; Krüger, Jörg | Journal Article, Conference Paper |
| 2018 | Visual feedback for grasping in virtual reality environments for an interface to instruct digital human models
Geiger, Andreas; Bewersdorf, Imke; Brandenburg, Elisabeth; Stark, Rainer | Conference Paper |
| 2018 | Visualizing trajectories for industrial robots from sampling-based path planning on mobile devices
Guhl, Jan; Vick, Axel; Vonasek, Vojtech; Krüger, Jörg | Conference Paper |
| 2018 | Vorgehensmodell zur Methodenauswahl in Six-Sigma-Projekten
Ariza Alvarez, Julian Enrique
: Krüger, J.; Jochem, Roland; Woll, R. | Dissertation |
| 2018 | Vorgehensweise zur Auslegung des Laserstrahlschmelzens am Beispiel von Wolframkarbid-Kobalt
Bergmann, André
: Rethmeier, Michael; Uhlmann, Eckart; Schmidt, Michael | Dissertation |
| 2018 | Wear behaviour of HIPIMS coated micro-miling tools with cutting edge preparation for machining steel moulds
Uhlmann, Eckart; Kuche, Yves; Polte, Julian; Polte, Mitchel | Conference Paper |
| 2018 | Weld pool shape observation in high power laser beam welding
Artinov, A.; Bakir, N.; Bachmann, M.; Gumenyuk, A.; Rethmeier, M. | Journal Article, Conference Paper |
| 2018 | Werkzeug- und prozessseitige Grundlagen des Schienenschleifens unter Berücksichtigung der Schienentemperatur und der Wechselwirkung mit dem Einsatzverhalten der Schiene
Lypovka, Pavlo
: Uhlmann, Eckart | Dissertation |
| 2018 | Wissensmanagement im Kontext von Industrie 4.0
Orth, Ronald; Steinhöfel, Erik; Galeitzke, Mila; Hecklau, Fabian | Journal Article |
| 2018 | Wissensmanagement in Freien Berufen
Steinhöfel, Erik | Journal Article |
| 2018 | The Working Posture Controller: Automated adaptation of the workpiece pose to enable a neutral working posture
Nguyen, The Duy
: Stark, Rainer; Krüger, Jörg; Deuse, Jochen | Dissertation |
| 2017 | 3D laser metal deposition in an additive manufacturing process chain
Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael | Abstract |
| 2017 | Accuracy of a single camera, marker based surgical navigation system - simulation and implementation
Katanacho, Manuel; Krumpek, Oliver; Uhlmann, Eckart | Abstract |
| 2017 | Adaptives Entwicklungstool zur intelligenten Konfigurierung von Condition-Monitoring-Algorithmen
Laghmouchi, Abdelhakim | Dissertation |
| 2017 | Additiv gefertigte Kupferlegierungen
Uhlmann, E.; Kashevko, V. | Journal Article |
| 2017 | Application of D-optimum experimental designs in consideration of restrictions for laser metal deposition
Marko, Angelina; Graf, Benjamin; Gook, Sergej; Rethmeier, Michael | Journal Article |
| 2017 | Application of head-mounted devices with eye-tracking in virtual reality therapy
Lutz, O.H.-M.; Burmeister, C.; Dos Santos, L.F.; Morkisch, N.; Dohle, C.; Krüger, J. | Journal Article |
| 2017 | Application of Spindle Speed Increaser as Sustainable Solution to Upgrade Machine Tools
Uhlmann, E.; Thom, S.; Ehricke, M. | Journal Article, Conference Paper |
| 2017 | Assessing carbon dioxide emission reduction potentials of improved manufacturing processes using multiregional input output frameworks
Ward, H.; Burger, M.; Chang, Y.-J.; Fürstmann, P.; Neugebauer, S.; Radebach, A.; Sproesser, G.; Pittner, A.; Rethmeier, M.; Uhlmann, E.; Steckel, J.C. | Journal Article |
| 2017 | Assessing visual attention in virtual reality: Automatic one-point calibration for eye-tracking
Lutz, O.H.-M.; Kruger, J. | Conference Paper |
| 2017 | Assistenzsysteme für die Produktion
Kraus, Werner; Stelzer, Patrick; Trostmann, Erik; Surdilovic, Dragoljub | Book Article |
| 2017 | Assistenzsysteme. Personalisierbare Assistenzkinematiken und am Körper getragene Hebehilfen
Kraus, Werner; Lefint, Jérémy; Müller, Veit; Schwarz, Oliver; Stelzer, Patrick; Surdilovic, Dragoljub; Trostmann, Erik | Book Article |
| 2017 | Auslegung der additiven Prozesskette
Petrat, Torsten; Kersting, Robert | Journal Article |
| 2017 | Baustrategien zur Beeinflussung von Materialauftrag und Temperaturentwicklung bei der additiven Fertigung mittels Laser-Pulver-Auftragschweißen
Petrat, Torsten | Conference Paper |
| 2017 | Beitrag immaterieller Faktoren zur Bewältigung von Risiken in Industriellen Produkt-Service Systemen
Wewiór, Jakub Wojciech
: Seliger, Günther | Dissertation |
| 2017 | BeMobil: Developing a user-friendly and motivating telerehabilitation system for motor relearning after stroke
Minge, M.; Ivanova, E.; Lorenz, K.; Joost, G.; Thüring, M.; Krüger, J. | Conference Paper |
| 2017 | Benefits and obstacles of sustainable product development methods
Stark, R.; Buchert, T.; Neugebauer, S.; Bonvoisin, J.; Finkbeiner, M. | Journal Article |
| 2017 | Bürstspanen von Profilen
Uhlmann, E.; Sommerfeld, C.; Renner, M.; Baumann, M. | Journal Article |
| 2017 | Calibration of thermographic spot weld testing with X-ray computed tomography
Myrach, Philipp; Jonietz, Florian; Meinel, Dietmar; Suwala, Hubert; Ziegler, Mathias | Journal Article |
| 2017 | Carbon Fibre Recycling from Milling Dust for the Application in Short Fibre Reinforced Thermoplastics
Uhlmann, E.; Meier, P. | Journal Article, Conference Paper |
| 2017 | Characterization and optimization of ultra-precision machine tools and processes by time resolved PSD signature of micro/nano structured optical surfaces
Uhlmann, E.; Kühne, S.; Jagodzinski, M.; Malcher, M. | Conference Paper |
| 2017 | Charakterisierung des Bruch- und Festigkeitsverhaltens von widerstandspunktgeschweißten Aluminiumverbindungen
Meschut, Gerson; Janzen, Vitalij; Rethmeier, Michael; Gumenyuk, Andrey; Frei, Julian | Journal Article |
| 2017 | The chicken or the egg: The relationship between knowledge and business model innovation
Inkinen, H.; Steinhöfel, E. | Conference Paper |
| 2017 | CNNs under attack. On the vulnerability of deep neural networks based face recognition to image morphing
Wandzik, Lukasz; Vicente-Garcia, Raul; Kaeding, Gerald; Chen, Xi | Conference Paper |
| 2017 | CO2-Reinigung vor dem Impulsmagnetischen Schweißen
Uhlmann, E.; Drieux, S.; Jaczkowski, R. | Journal Article |
| 2017 | Comparative analysis of German and Brazilian innovation systems to improve binational cooperation
Melo, G.; Haunschild, J.; Orth, R.; Will, M.; Kohl, H. | Conference Paper |
| 2017 | A Comparison of Best Practices of Public and Private Support Incentives for the Remanufacturing Industry
Guidat, T.; Seidel, J.; Kohl, H.; Seliger, G. | Journal Article, Conference Paper |
| 2017 | Compensating human feedback oscillation in compliance control for industrial robots
Nikoleizig, S.; Vick, A.; Krüger, J. | Conference Paper |
| 2017 | Computerised mirror therapy with Augmented Reflection Technology for early stroke rehabilitation
Hoermann, S.; Santos, L.F. dos; Morkisch, N.; Jettkowski, K.; Sillis, M.; Devan, H.; Kanagasabai, P.S.; Schmidt, H.; Krüger, J.; Dohle, C.; Regenbrecht, H.; Hale, L.; Cutfield, N.J. | Journal Article |
| 2017 | Contribution to a database of Ti-6Al-4V components manufactured with selective laser melting process
Uhlmann, Eckart; Bergmann, André; Gridin, Witalij; Rolon, Daniel Alexandre | Conference Paper |
| 2017 | Cutting forces while machining STAVAX ESU with binderless-cBN
Uhlmann, E.; Oberschmidt, D.; Polte, J.; Polte, M. | Conference Paper |
| 2017 | Cutting Simulation with Consideration of the Material Hardening in the Shear Zone of AISI1045
Uhlmann, E.; Henze, S.; Brömmelhoff, K.; Reimers, W. | Journal Article, Conference Paper |
| 2017 | Decentralized data analytics for maintenance in industrie 4.0
Uhlmann, Eckart; Laghmouchi, Abdelhakim; Geisert, Claudio; Hohwieler, Eckhard | Journal Article, Conference Paper |
| 2017 | Deployment of a business and innovation centre to foster cooperation between Europe and Brazil
Haunschild, Johanna; Melo, Gustavo; Orth, Ronald; Will, Markus; Kohl, Holger | Conference Paper |
| 2017 | Depth map based point cloud registration to CT patient data for surgical navigation
Katanacho, Manuel; Lack, John-Certus; Hoffmann, Jonas; Uhlmann, Eckart | Conference Paper |
| 2017 | Design of a test environment for planning and interaction with virtual production processes
Buchholz, C.; Kind, S.; Stark, R. | Journal Article, Conference Paper |
| 2017 | Die-Sinking EDM of high aspect ratio cavities in nickel-base alloy
Domingos, David Carlos
: Uhlmann, Eckart | Dissertation |
| 2017 | Droplet removal from PVD-coated micro-milling tools with the immersed tumbling process
Uhlmann, E.; Kuche, Y.; Oberschmidt, D.; Polte, J. | Conference Paper |
| 2017 | Dry-EDM milling of micro-scale features with high speed rotating tungsten tube electrodes
Uhlmann, E.; Perfilov, I.; Schimmelpfennig, T.-M.; Schweitzer, L.; Yabroudi, S. | Conference Paper |
| 2017 | Dynamical Fatigue Behavior of Additive Manufactured Products For a Fundamental Life cycle Approach
Uhlmann, E.; Fleck, C.; Gerlitzky, G.; Faltin, F. | Journal Article, Conference Paper |
| 2017 | Einflussfaktoren der Reinigung mit flüssigem Kohlendioxid auf fertigungsrelevante Materialeigenschaften medizintechnischer Kunststoffe
Mankiewicz, Johannes
: Uhlmann, Eckart | Dissertation |
| 2017 | Einsatz von CFK-Fräspartikeln als Füllstoff
Uhlmann, E.; Meier, P. | Journal Article |
| 2017 | Einsatzverhalten nanocomposite-beschichteter PcBN-Werkzeuge für die Hartdrehbearbeitung.
Oyanedel Fuentes, Javier Alejandro
: Uhlmann, Eckart (Hrsg.) | Dissertation |
| 2017 | Empirical study on status of preparation for ISO 9001:2015
Rybski, C.; Jochem, R.; Homma, L. | Journal Article, Conference Paper |
| 2017 | Energieautarke Kühlung von Lineardirektantrieben
Uhlmann, E.; Salein, S. | Journal Article |
| 2017 | Energy efficiency and environmental impacts of high power gas metal arc welding
Sproesser, G.; Chang, Y.-J.; Pittner, A.; Finkbeiner, M.; Rethmeier, M. | Journal Article |
| 2017 | Enhancing international collaboration through regional innovation hubs
Cap, Jan-Patrick; Haunschild, Johanna; Melo, Gustavo; Battistella Luna, Marina | Conference Paper |
| 2017 | Entwicklung eines Verfahrens zur Bestimmung der Rissanfälligkeit von hochfesten Stählen beim Widerstandspunktschweißen
Rethmeier, Michael; Suwala, Hubert; Frei, Julian
: Salomon, Rainer (Hrsg.) | Report |
| 2017 | Environmental energy efficiency of single wire and tandem gas metal arc welding
Sproesser, G.; Chang, Y.-J.; Pittner, A.; Finkbeiner, M.; Rethmeier, M. | Journal Article |
| 2017 | EWM and DVS presented EWM Award for augmented reality assistance system for welding
Rethmeier, M.; Stöckl, R.; Atzberger, A. | Journal Article |
| 2017 | Fräsen partikelverstärkter Titanmatrix-Verbundwerkstoffe
Uhlmann, E.; Kaulfersch, F. | Journal Article |
| 2017 | Fräsen von Titanmatrix-Verbundwerkstoffen
Uhlmann, E.; Kaulfersch, F.F. | Journal Article |
| 2017 | Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik. Jahresbericht 2016/2017
| Annual Report |
| 2017 | Future of Business Models in Manufacturing
Seidel, Johannes; Barquet, Ana Paula; Seliger, Günther; Kohl, Holger | Book Article |
| 2017 | A guideline for planning and implementing an action-based and transnational course in higher engineering education
Stock, T.; Haskins, C.; Gladysz, B.; Urgo, M.; Kohl, H. | Conference Paper |
| 2017 | Herstellung und Einsatz von PKD-Mikrofräswerkzeugen
Polte, Mitchel
: Uhlmann, Eckart | Dissertation |
| 2017 | High-performance benchmarking of manufacturing processes with object-based modeling
Zhou, X.; Kohl, H. | Journal Article |
| 2017 | Hybrid laser arc welding of X80 and X120 steel grade
Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael | Journal Article |
| 2017 | Hypothetical sustainability axioms for axiomatic design with an application in grinding machine design
Garretson, I.C.; Linke, B.S.; Peukert, B.; Uhlmann, E. | Conference Paper |
| 2017 | Industrie 4.0 - Digital Redesign of Product Creation and Production in Berlin as an Industrial Location
Stark, R.; Damerau, T.; Lindow, K. | Book Article |
| 2017 | Industrie 4.0 im Produktionsumfeld
Knothe, Thomas; Reiff-Stephan, Jörg; Vladova, Gergana; Ullrich, André; Lipinski, René von; Buße, Dirk; Kern, Manuel | Book Article |
| 2017 | Influence of non-uniform martensitic transformation on residual stresses and distortion of GMA-welding
Neubert, S.; Pittner, A.; Rethmeier, M. | Journal Article |
| 2017 | Influence of Procedure-Related Cutting Edge Micro Geometry Modification on the Production Quality When Milling Fibre Reinforced Plastics
Uhlmann, E.; Stawiszynski, B.; Protz, F.; Prasol, L. | Journal Article |
| 2017 | Innovations in digital modelling for next generation manufacturing system design
Stark, R.; Kind, S.; Neumeyer, S. | Journal Article |
| 2017 | Innovative control of assembly systems and lines
Krüger, Jörg; Wang, Lihui; Verl, Alexander; Bauernhansl, Thomas; Carpanzano, Emanuele; Makris, Sotiris; Fleischer, Jürgen; Reinhart, Gunther; Franke, Jörg; Pellegrinelli, Stefania | Journal Article |
| 2017 | Innovative Roboteranwendung: das Experiment Catch
Surdilovic, D.; Surdilovic, J.; Fernandez, R. | Journal Article |
| 2017 | Instrument calibration for a camera based surgical navigation system
Katanacho, Manuel; Krumpek, Oliver; Uhlmann, Eckart; Melnik, Steffen | Abstract |
| 2017 | An integrated approach for industrial robot control and programming combining haptic and non-haptic gestures
Hügle, J.; Lambrecht, J.; Krüger, J. | Conference Paper |
| 2017 | Intellectual Capital-Driven Technology and Innovation Management
Galeitzke, M.; Steinhöfel, E.; Orth, R.; Kohl, H. | Journal Article |
| 2017 | Intelligent pattern recognition of a SLM machine process and sensor data
Uhlmann, E.; Pontes, R.P.; Laghmouchi, A.; Bergmann, A. | Journal Article, Conference Paper |
| 2017 | Intelligent pattern recognition of SLM machine energy data
Uhlmann, E.; Pastl Pontes, R.; Laghmouchi, A.; Hohwieler, E.; Feitscher, R. | Journal Article |
| 2017 | Intelligent production systems in the era of industrie 4.0 - changing mindsets and business models
Uhlmann, E.; Hohwieler, E.; Geisert, C. | Journal Article |
| 2017 | Intelligente Reinigungs- und Analyseprozesse
Mankiewicz, Johannes; Rochowicz, Markus; Ihde, Jörg | Journal Article |
| 2017 | Kantenpräparation durch Formschleifprozesse
Uhlmann, E.; Bruckhoff, J. | Journal Article |
| 2017 | Kinematisch modulierte Schleifprozesse zur Strukturierung von tribologisch beanspruchten Funktionsoberflächen
Bäcker, Clemens
: Göhlich, D.; Uhlmann, E.; Karpuschewski, B. | Dissertation |
| 2017 | Kognitive Modelle zur virtuellen Absicherung der mentalen Belastung bei Montagetätigkeiten
Brandenburg, Elisabeth; Döllinger, Nina; Geiger, Andreas; Stark, Rainer | Conference Paper |
| 2017 | Kubisch-kristallines Bornitrid ohne Bindephase als Schneidstoff in der Ultrapräzisions-Zerspanung
Polte, Julian
: Uhlmann, Eckart | Book |
| 2017 | Let's do this together: Bi-Manu-Interact, a novel device for studying human haptic interactive behavior
Ivanova, E.; Krause, A.; Schälicke, M.; Schellhardt, F.; Jankowski, N.; Achner, J.; Schmidt, H.; Joebges, M.; Krüger, J. | Conference Paper |
| 2017 | Liquid covered micro-milling
Uhlmann, E.; Oberschmidt, D.; Polte, M.; Polte, J. | Conference Paper |
| 2017 | Low-dimensional time-discrete models for high dynamic machine tools
Uhlmann, E.; Reis, T.; Oberschmidt, D.; Rendel, O.; Guhde, S. | Conference Paper |
| 2017 | Manufacturing of CVD diamond micro-end mills with electrical discharge machining
Uhlmann, E.; Oberschmidt, D.; Polte, M.; Polte, J.; Schimmelpfennig, T.-M.; Börnstein, J. | Conference Paper |
| 2017 | Maturity model and action recommendation: A PSS capability self-assessment tool for companies
Exner, K.; Zimpfer, R.; Stark, R. | Journal Article, Conference Paper |
| 2017 | Measurement of in-mould shear rates by x-ray particle image velocimetry
Uhlmann, E.; Hein, C.; Oberschmidt, D. | Conference Paper |
| 2017 | Metamorphose zur intelligenten und vernetzten Fabrik
Gelec, Erdem; Kern, Manuel; Schneider, Benjamin; Ullrich, André; Vladova, Gergana; Gronau, Norbert; Lipinski, René von; Buße, Dirk; Oertwig, Nicole | Book Article |
| 2017 | A model for the development of sustainable innovations for the early phase of the innovation process
Stock, T.; Obenaus, M.; Slaymaker, A.; Seliger, G. | Journal Article, Conference Paper |
| 2017 | Modeling and Analysis of Contact Conditions during NC-Form Grinding of Cutting Edges
Uhlmann, E.; Bruckhoff, J. | Journal Article |
| 2017 | Modeling approach regarding surface functionalization by force-controlled micro and nano forming
Uhlmann, E.; Kühne, S.; Jagodzinski, M.; Malcher, M.; Trevino, R. | Conference Paper |
| 2017 | Numerical simulation of thermally induced residual stresses in friction stir welding of aluminum alloy 2024-T3 at different welding speeds
Bachmann, M.; Carstensen, J.; Bergmann, L.; dos Santos, J.F.; Wu, C.S.; Rethmeier, M. | Journal Article |
| 2017 | Overview and new developments in research on resistance spot welding of advanced high strength steels
Frei, Julian; Rethmeier, Michael | Conference Paper |
| 2017 | PLM Customizing
Sucuoglu, E.; Exner, K.; Stark, R. | Conference Paper |
| 2017 | Die Potentiale einer lernfähigen Produktion nutzen
Krüger, J.; Sauer, A.; Zäh, M.F. | Journal Article |
| 2017 | Precision enhancement technologies for multi-axis ultra precision machining of freeform optical elements with variable micro/nano structures
Uhlmann, E.; Kühne, S.; Jagodzinski, M.; Widemann, R.; Haskic, K. | Conference Paper |
| 2017 | Proactive maintenance as success factor for use-oriented Product-Service Systems
Exner, K.; Schnürmacher, C.; Adolphy, S.; Stark, R. | Journal Article, Conference Paper |
| 2017 | Probabilities in safety of machinery - risk reduction through fixed and moveable guards by standardized impact tests, part 1: Applications and consideration of random effects
Landi, L.; Mödden, H.; Pera, F.; Uhlmann, E.; Meister, F. | Conference Paper |
| 2017 | Probabilities in safety of machinery - risk reduction through fixed and moveable guards by standardized impact tests, part 2: Possible improvements with FE impact simulations
Landi, L.; Uhlmann, E.; Meister, F.; Pera, F.; Mödden, H. | Conference Paper |
| 2017 | Region of interest detection with iterative colour clustering and a global weighting scheme
Katanacho, Manuel; Hoffmann, Jonas; Uhlmann, Eckart | Abstract |
| 2017 | Resource-optimized verification planning for mechatronic systems in the virtual stage of product creation
Gerhorst, Frank
: Stark, R. | Dissertation |
| 2017 | Ressourcenadaptive Produktionssysteme
Cherkaskyy, Michael; Feitscher, Roberto; Hohwieler, Eckhard; Oertwig, Nicole; Stoldt, Johannes; Wenzel, Ken | Book Article |
| 2017 | Ressourcenoptimiertes Produktdesign
Graf, Roberta; Ko, Nathanael; Buchert, Tom; Rothenburg, Uwe | Book Article |
| 2017 | Safe human-robot-collaboration-introduction and experiment using ISO/TS 15066
Rosenstrauch, M.J.; Kruger, J. | Conference Paper |
| 2017 | Schritte zur Qualifizierung der Schweißstruktursimulation für die additive Fertigung am Beispiel Laser-Pulver-Auftragsschweißen
Biegler, Max | Conference Paper |
| 2017 | Shortened manufacturing of individualized carbide tools by selective laser melting and hot isostatic pressing
Uhlmann, Eckart; Bergmann, André; Gridin, Witalij | Conference Paper |
| 2017 | SHPbench - a smart hybrid prototyping based environment for early testing, verification and (user based) validation of advanced driver assistant systems of cars
Buchholz, C.; Vorsatz, T.; Kind, S.; Stark, R. | Journal Article, Conference Paper |
| 2017 | Simulation erlaubt den Einblick beim Auftragsschweißen
Biegler, Max | Journal Article |
| 2017 | Simulationsgestütztes Performance Measurement zur Wirtschaftlichkeitsbewertung von Managementsystemen
Raßfeld, Colin
: Krüger, J.; Jochem, R.; Woll, R. | Dissertation |
| 2017 | Simulationsmodell als Basis zur Ableitung von Zerspanstrategien zur Reduzierung von thermischen Bearbeitungseinflüssen beim Hartdrehen
Ivanov, Ivan Mitkov
: Uhlmann, Eckardt | Dissertation |
| 2017 | Smart life cycle monitoring for sustainable maintenance and production
Uhlmann, Eckart; Pastl Pontes, Rodrigo; Laghmouchi, Abdelhakim; Geisert, Claudio; Hohwieler, Eckhard | Journal Article, Conference Paper |
| 2017 | Smart wireless sensor network and configuration of algorithms for condition monitoring applications
Uhlmann, E.; Laghmouchi, A.; Geisert, C.; Hohwieler, E. | Journal Article |
| 2017 | Spanende Bearbeitung von Faserverbundkunststoffen
Uhlmann, E.; Christiansen, G. | Journal Article |
| 2017 | Statistische Analyse der Schweißraupengeometrie von Ti6Al4V beim Laserbeschichten
Marko, Angelina; Graf, Benjamin; Rethmeier, Michael | Journal Article |
| 2017 | Steigerung des Formänderungsvermögens der Magnesiumlegierung AZ31 bei Raumtemperatur unter Nutzung der elektro-magnetischen Umformung
Prasol, Lukas
: Uhlmann, Eckart | Dissertation |
| 2017 | Substitution of Coolant by Using a Closed Internally Cooled Milling Tool
Uhlmann, E.; Riemer, H.; Schröter, D.; Sammler, F.; Richarz, S. | Journal Article, Conference Paper |
| 2017 | Surface structuring by pulsed laser implantation
Hilgenberg, K.; Rethmeier, M.; Steinhoff, K. | Journal Article |
| 2017 | Sustainability in model-based planning and control of global value creation networks
Oertwig, N.; Jochem, R.; Knothe, T. | Journal Article, Conference Paper |
| 2017 | SysML-Modelle maschinell verstehen und verknüpfen
Mochine, Philipp; Sünnetcioglu, Atakan; Dungern, Oskar von; Stark, Rainer | Conference Paper |
| 2017 | Target-driven selection and scheduling of methods for sustainable product development
Buchert, Tom; Halstenberg, Friedrich A.; Bonvoisin, Jeremy; Lindow, Kai; Stark, Rainer | Journal Article |
| 2017 | Teilprojekt TP 1 - Information im PLM-Prozess
Rothenburg, Uwe | Book Article |
| 2017 | Temperature generation of different travel path strategies to build layers using Laser Metal Deposition
Petrat, Torsten; Graf, Benjamin; Winterkorn, René; Gumenyuk, Andrey; Rethmeier, Michael | Conference Paper |
| 2017 | Trockeneisstrahlen als Vorbehandlungsverfahren vor dem Galvanisieren
Baira, El Mustapha
: Uhlmann, E.; Jochem, R.; Kohl, H.; Krüger, J.; Rethmeier, M.; Seliger, G.; Stark, R. | Dissertation |
| 2017 | Ultrasonic Assisted Milling of Reinforced Plastics
Uhlmann, E.; Protz, F.; Stawiszynski, B.; Heidler, S. | Journal Article, Conference Paper |
| 2017 | Umweltbewertung und Ökoeffizienz beim Metall-Schutzgasschweißen von Dickblechverbindungen
Sproesser, Gunther
: Rethmeier, Michael | Dissertation |
| 2017 | Unified information access in product creation with an integrated control desk
Wrasse, Kevin; Diener, Holger; Hayka, Haygazun; Stark, Rainer | Conference Paper |
| 2017 | Utilization of product lifecycle data from PLM systems in platforms for Industrial Symbiosis
Halstenberg, F.A.; Lindow, K.; Stark, R. | Journal Article, Conference Paper |
| 2017 | Verfahren, Anordnung und Computerprogrammprodukt zur Lageerfassung eines zu untersuchenden Objektes
Engel, Sebastian; Katanacho, Manuel; Keeve, Erwin; Uhlmann, Eckart | Patent |
| 2017 | Verschleiß an Gleitschleifkörpern
Uhlmann, E.; Eulitz, A.; Männel, C. | Journal Article |
| 2017 | Vibrationsunterstützte Senkerosion. Senkerosive Fertigung von Dichtschlitzen in einer Nickelbasislegierung mit Vibrationsunterstützung
Uhlmann, E.; Domingos, C.D.; Yabroudi, S.; Bolz, R. | Journal Article |
| 2017 | Virtual Prototyping and Validation of Cpps within a New Software Framework
Neumeyer, S.; Exner, K.; Kind, S.; Hayka, H.; Stark, R. | Journal Article |
| 2017 | Vorhersage zur Bauteilmaßhaltigkeit bei der additiven Fertigung mittels Schweißstruktursimulation
Biegler, Max; Rethmeier, Michael | Conference Paper |
| 2017 | Wear behaviour of diamond coated micro-milling tools during micro machining
Uhlmann, E.; Kuche, Y.; Oberschmidt, D.; Polte, J. | Conference Paper |
| 2017 | Wear performance of diamond coated WC-Co tools with a CrN interlayer
Chandran, M.; Sammler, F.; Uhlmann, E.; Akhvlediani, R.; Hoffman, A. | Journal Article |
| 2017 | Wege in die Zukunft der Produktion. Ganzheitliche Mitarbeitereinbindung als Befähiger für die Transformation zur Industrie 4.0
Knothe, T.; Ullrich, A.; Weinert, N. | Journal Article |
| 2017 | Werkzeuge
Oertwig, Nicole; Rimmelspacher, Sven O.; Vladova, Gergana; Ullrich, André; Gronau, Norbert; Gelec, Erdem | Book Article |
| 2017 | Why not using ceramics - trends from ceramics research
Stepanyan, Marina; Seifert, Gerhard; Weiß, Torsten; Klein, Tiago Borsoi; Freund, Susanne | Journal Article |
| 2017 | Wissensbasierte Entwicklung nachhaltiger Produkte
Lindow, Kai
: Meyer, H.J.; Stark, R.G.; Hansen, E.G. | Dissertation |
| 2017 | The working posture controller: Automated assessment and optimisation of the working posture during the process
Nguyen, T.D.; Pilz, C.; Krüger, J. | Conference Paper |
| 2017 | Zeitdiskretes echtzeitfähiges Berechnungsmodell
Uhlmann, E.; Reis, T.; Rendel, O.; Guhde, S. | Journal Article |
| 2016 | 11. Berliner Runde - Neue Konzepte für Werkzeugmaschinen 2016. Begleitband
: Uhlmann, Eckart (Hrsg.) | Conference Proceedings |
| 2016 | 3D human face reconstruction for surgical navigation
Katanacho, Manuel; Hoffmann, Jonas; Engel, Sebastian | Abstract |
| 2016 | Abrasive waterjet turning of titanium alluminides
Uhlmann, E.; Faltin, F.; Flögel, K. | Conference Paper |
| 2016 | Adapting Ergonomic Assessments to Social Life Cycle Assessment
Chang, Y.-J.; Nguyen, T.D.; Finkbeiner, M.; Krüger, J. | Journal Article, Conference Paper |
| 2016 | Add-on Error Compensation Unit as Sustainable Solution for Outdated Milling Machines
Kianinejad, K.; Thom, S.; Kushwaha, S.; Uhlmann, E. | Journal Article, Conference Paper |
| 2016 | Additive Fertigung von Nickelbasis-Superlegierungen mittels Laserstrahlschmelzen am Beispiel von Diamalloy 4004NS
König-Urban, Kamilla
: Uhlmann, Eckart | Dissertation |
| 2016 | Agentenbasierte Automatisierung des Betriebs Industrieller Produkt-Service Systeme
Raue, Niels
: Kohl, H.; Uhlmann, Eckart; Meier, H. | Dissertation |
| 2016 | Agile competence management for flexible production systems
Oertwig, Nicole; Galeitzke, Mila; Hecklau, Fabian; Kohl, Holger | Conference Paper |
| 2016 | Anforderungsanalyse einer Montagesimulationssoftware zwecks Aufwandsminimierung manueller Konfigurationsaufgaben
Brandenburg, Elisabeth; Geiger, Andreas; Rothenburg, Uwe; Stark, Rainer | Conference Paper |
| 2016 | Antireflection coating of microstructures by anodizing and influence on the dimensional accuracy of structures
Uhlmann, E.; Kühne, S.; Malcher, M.; Jagodzinski, M. | Conference Paper |
| 2016 | Automated dressing of graphite electrodes for electrical discharge machining (EDM) of seal slots in turbine components
Uhlmann, E.; Domingos, D.C. | Journal Article, Conference Paper |
| 2016 | Automated Vendor Selection for Industrial Service Shares
Uhlmann, E.; Sawczyn, N.; Raue, N.; Gabriel, C. | Journal Article, Conference Paper |
| 2016 | BBR - Wissensbilanz: Nicht nur die Technik im Blick haben!
Bolten, Henning; Wuscher, Sven | Book Article |
| 2016 | Benefits of a learning factory in the context of lean management for the pharmaceutical industry
Rybski, C.; Jochem, R. | Conference Paper, Journal Article |
| 2016 | Bestimmung der Rissanfälligkeit von hochfesten Stählen beim Widerstandspunktschweißen
Frei, Julian; Suwala, Hubert; Gumenyuk, Andrey; Rethmeier, Michael | Journal Article |
| 2016 | BMA AG - Der süße Geschmack des Wissensmanagements
Stolte, Hartmut; Orth, Ronald | Book Article |
| 2016 | Business model innovation: A comparative analysis
Steinhöfel, Erik; Kohl, Holger; Orth, Ronald | Conference Paper |
| 2016 | Business model innovation: An intellectual capital perspective
Steinhöfel, Erik; Inkinen, Henri | Conference Paper |
| 2016 | Camera pose estimation for a visual navigation system
Katanacho, Manuel; Hoffmann, Jonas | Conference Paper |
| 2016 | CBN-micro-milling tools for machining hardened steel moulds
Uhlmann, E.; Oberschmidt, D.; Polte, M.; Polte, J.; Börnstein, J. | Conference Paper |
| 2016 | Cloud- und dienstebasierte Produktionsplattformen
Vick, A.; Krüger, J. | Journal Article |
| 2016 | Cloudbasierte Industrierobotersteuerungen
Guhl, J.; Vick, A.; Nguyen, T.; Wassermann, J.; Krüger, J. | Journal Article |
| 2016 | CO2-Schneeentstehung und deren Wirkung auf die Effekte beim CO2-Schneestrahlen
Kretzschmar, Michael
: Rethmeier, M.; Uhlmann, Eckart; Weidner, E. | Dissertation |
| 2016 | Combined laser additive manufacturing for complex turbine blades
Graf, Benjamin; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael | Journal Article |
| 2016 | Combined laser additive manufacturing with powderbed and powder nozzle for turbine parts
Graf, Benjamin; Schuch, Michael; Petrat, Torsten; Gumenyuk, Andrey; Rethmeier, Michael | Conference Paper |
| 2016 | Comparative analysis of dry-EDM and conventional EDM for the manufacturing of micro holes in Si3N4-TiN
Uhlmann, E.; Schimmelpfennig, T.-M.; Perfilov, I.; Streckenbach, J.; Schweitzer, L. | Conference Paper, Journal Article |
| 2016 | Concept of an offline correction method based on historical data for milling operations using industrial robots
Krüger, J.; Zhao, H.; Reis de Ascencao, G.; Jacobi, P.; Surdilovic, D.; Schöll, S.; Polley, W. | Journal Article |
| 2016 | Contactless fault isolation for FinFET technologies with visible light and GaP SIL
Lohrke, H.; Scholz, P.; Beyreuther, A.; Ganesh, U.; Uhlmann, E.; Kuhne, S.; Jagodzinski, M.; Iwaki, Y.; Chivas, R.; Silverman, S.; Boit, C. | Conference Paper |
| 2016 | Critical depth of cut and asymptotic spindle speed for chatter in micro milling with process damping
Wang, J.J.; Uhlmann, E.; Oberschmidt, D.; Sung, C.F.; Perfilov, I. | Journal Article |
| 2016 | Data management in collaborative interdisciplinary research projects - conclusions from the digitalization of research in sustainable manufacturing
Wang, W.M.; Göpfert, T.; Stark, R. | Journal Article |
| 2016 | Definiertes Kantenrunden durch Strömungsschleifen
Uhlmann, E.; Roßkamp, S. | Journal Article |
| 2016 | Development and evaluation of solar energy B2B solutions
Wrasse, Kevin R.; Hayka, Haygazun; Stark, Rainer | Journal Article, Conference Paper |
| 2016 | The development of a toolbox for assessing and communicating intellectual capital of SME in the context of the lending process of banks
Wuscher, Sven; Kohl, Holger | Conference Paper |
| 2016 | Digitalisierte Produktion - Potentiale für eine nachhaltige urbane Wertschöpfung. Vorträge, Proceedings
: Uhlmann, Eckart (Hrsg.) | Conference Proceedings |
| 2016 | DIN EN ISO 9001:2015. Vorbereitung und Stand der Umsetzung in deutschen Unternehmen
Rybski, Christoffer; Klünder, Richard
: Jochem, Roland (Hrsg.) | Study |
| 2016 | Distributed real-time control service framework for human-robot interaction applications
Niebuhr, C.A.; Vick, A. | Conference Paper |
| 2016 | Dressing of graphite electrodes for EDM of seal slots in nickel-base alloy MAR-M247
Uhlmann, E.; Domingos, D.C. | Conference Paper, Journal Article |
| 2016 | Dry ice blasting as a substitution for the conventional electroplating pre-treatments
Uhlmann, E.; Baira, E.M.; Jaczkowski, R. | Journal Article |
| 2016 | Effect of cooling lubricant on surface roughness for turning stainless steel with binderless-cBN
Uhlmann, E.; Oberschmidt, D.; Polte, J.; Polte, M.; Huth-Herms, K. | Conference Paper |
| 2016 | Effects of different cutting edge preparation methods on micro milling performance
Uhlmann, E.; Oberschmidt, D.; Kuche, Y.; Löwenstein, A.; Winker, I. | Conference Paper, Journal Article |
| 2016 | Einfluss von Herstellungs- und Lagerungsfaktoren auf die Eigenschaften von Trockeneispellets und das Strahlergebnis
Motschmann, Simon
: Uhlmann, Eckart | Dissertation |
| 2016 | Einführung in die Fallstudien
Voigt, Stefan; Orth, Ronald | Book Article |
| 2016 | Empirical study on quality management for product-service systems in industrial environment
Pasch, Florian; Rybski, Christoffer; Jochem, Roland | Journal Article, Conference Paper |
| 2016 | Energieeffiziente Nutzung von Industrierobotern für die Bearbeitung
Uhlmann, E.; Reinkober, S.; Mohnke, C. | Journal Article |
| 2016 | Energy efficient usage of industrial robots for machining processes
Uhlmann, E.; Reinkober, S.; Hollerbach, T. | Conference Paper, Journal Article |
| 2016 | Entscheidende Veränderungen in der zukünftigen kollaborativen Produktentwicklung
Lünnemann, Pascal; Fresemann, Carina; Neumeyer, Sebastian; Wang, W.M.; Stark, R. | Conference Paper |
| 2016 | Entscheidungsmethodik zur kompetenzbasierten Team-Organisation bei der Implementierung von Energiemanagementsystemen
Karcher, Phillip
: Jochem, Roland | Dissertation |
| 2016 | Entwicklung eines Vorgehensmodells zur Einführung eines globalen Qualitätsmanagementsystem
Meentken, Felix
: Jochem, Roland | Dissertation |
| 2016 | Entwicklung und Einsatz eines geschlossen-innengekühlten Fräswerkzeugs
Uhlmann, E.; Riemer, H.; Schröter, D. | Journal Article |
| 2016 | Erlebbarkeit von Anlagenkomponenten im Kontext Virtuelle Inbetriebnahme in virtuellen Umgebungen
Geiger, Andreas; Rehfeld, Ingolf; Rothenburg, Uwe; Stark, Rainer | Conference Paper |
| 2016 | The evolution from hybrid to blended to beyond prototyping
Lindow, Kai; Sernitzke, André | Book Article |
| 2016 | Examination of spot welded joints with active thermography
Jonietz, F.; Myrach, P.; Suwala, H.; Ziegler, M. | Journal Article |
| 2016 | Experimental determination of TRIP-parameter K for mild- and high-strength low-alloy steels and a super martensitic filler material
Neubert, S.; Pittner, A.; Rethmeier, M. | Journal Article |
| 2016 | Feasibility of connecting machinery and robots to industrial control services in the cloud
Horn, C.; Krüger, J. | Conference Paper |
| 2016 | Finite element modeling of an alternating current electromagnetic weld pool support in full penetration laser beam welding of thick duplex stainless steel plates
Bachmann, M.; Kunze, R.; Avilov, V.; Rethmeier, M. | Journal Article |
| 2016 | Flexible, robot guided single-pass honing
Uhlmann, E.; Zimmermann, S. | Conference Paper |
| 2016 | Fräsbearbeitung hochabrasiver Mineralgusswerkstoffe
Uhlmann, E.; Kaulfersch, F. | Journal Article |
| 2016 | Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik. Jahresbericht 2015/2016
| Annual Report |
| 2016 | Full penetration laser beam welding of thick duplex steel plates with electromagnetic weld pool support
Avilov, V.; Fritzsche, A.; Bachmann, M.; Gumenyuk, A.; Rethmeier, M. | Journal Article |
| 2016 | Ganzheitliche Regelung der Energieeffizienz
Heimann, Oliver; Thiele, Gregor | Journal Article |
| 2016 | Geometric deviations in the production of micro-milling tools and their influence on the cutting process
Uhlmann, E.; Oberschmidt, D.; Kuche, Y.; Polte, M. | Conference Paper |
| 2016 | Geschickte Roboter für die Montage
Surdilovic, D.; Radojicic, J.; Bastidas-Cruz, A.; Konz, B.; Heyne, P. | Journal Article |
| 2016 | Gleitschleifen - Verfahrensgrundlagen und Prozessmodellierung
Dethlefs, Arne
: Uhlmann, Eckart | Dissertation |
| 2016 | Hard Turning of Hot Work and Cold Work Steels with HiPIMS and DCMS TiAlN Coated Carbide Inserts
Uhlmann, E.; Stawiszynski, B.; Leyens, C.; Heinze, S.; Sammler, F. | Journal Article, Conference Paper |
| 2016 | Herausforderungen für Unternehmen
Voigt, Stefan; Seidel, Holger; Orth, Ronald; Kohl, Holger | Book Article |
| 2016 | Herstellung und Einsatz von Wendeltiefbohrern zur Hartbearbeitung
Richarz, Sebastian
: Uhlmann, Eckart | Dissertation |
| 2016 | High level process map for Selective Laser Melting
Uhlmann, Eckart; Pastl Pontes, Rodrigo; Bergmann, André | Conference Paper |
| 2016 | High Power Laser Beam Welding of Thick-walled Ferromagnetic Steels with Electromagnetic Weld Pool Support
Fritzsche, A.; Avilov, V.; Gumenyuk, A.; Hilgenberg, K.; Rethmeier, M. | Journal Article |
| 2016 | High precision milling with a novel compliant machine tool
Uhlmann, E.; Oberschmidt, D.; Guhde, S.; Polte, M. | Conference Paper |
| 2016 | High-pressure jet cutting with liquid CO2
Uhlmann, E.; John, P. | Conference Paper |
| 2016 | Hochharte Schleifscheiben als 4-Stoffsystem
Uhlmann, E.; Thalau, J. | Journal Article |
| 2016 | Holistic approach for human resource management in Industry 4.0
Hecklau, F.; Galeitzke, M.; Flachs, S.; Kohl, H. | Conference Paper, Journal Article |
| 2016 | Improved ergonomics via an intelligent movement and gesture detection jacket
Kuschan, J.; Schmidt, H.; Krüger, J. | Conference Paper |
| 2016 | Increasing Performance and Energy Efficiency of Gas Metal Arc Welding by a High Power Tandem Process
Sproesser, G.; Pittner, A.; Rethmeier, M. | Journal Article, Conference Paper |
| 2016 | Individuelle Fertigung durch den Einsatz von Industrierobotern
Uhlmann, E.; Reinkober, S.; Mohnke, C. | Journal Article |
| 2016 | Industrie 4.0 - Digitale Neugestaltung der Produktentstehung und Produktion am Standort Berlin
Stark, Rainer; Damerau, Thomas; Lindow, Kai | Book Article |
| 2016 | The industry cockpit approach: A framework for flexible real-time production monitoring
Oertwig, N.; Gering, P. | Conference Paper |
| 2016 | Influence of cutting edge preparation on the performance of micro milling tools
Uhlmann, E.; Oberschmidt, D.; Löwenstein, A.; Kuche, Y. | Conference Paper, Journal Article |
| 2016 | Influence of rail grinding process parameters on rail surface roughness and surface layer hardness
Uhlmann, E.; Lypovka, P.; Hochschild, L.; Schröer, N. | Journal Article |
| 2016 | Influence of the rake angle on the surface formation during micro shaping of submicron optical structures in Au-layers
Uhlmann, E.; Kühne, S.; Jagodzinski, M. | Conference Paper |
| 2016 | Information management platform for the application of sustainable product development methods
Pförtner, Anne; Buchert, Tom; Lindow, Kai; Stark, Rainer; Hayka, Haygazun | Conference Paper, Journal Article |
| 2016 | Innovation in product-service system engineering based on early customer integration and prototyping
Exner, Konrad; Damerau, Thomas; Stark, Rainer | Journal Article, Conference Paper |
| 2016 | Innovation through network management. A method for determining collaboration potential
Cap, Jan-Patrick; Blaich, Erik; Pavim, Alberto Xaver; Will, Markus; Kohl, Holger; Orth, Ronald | Conference Paper |
| 2016 | Innovativer Fräsroboter für Großstrukturen
Uhlmann, E.; Reinkober, S.; Epping, M. | Journal Article |
| 2016 | Instruction of digital human models through interaction in immersive virtual environments
Geiger, Andreas; Brandenburg, Elisabeth; Stark, Rainer | Conference Paper |
| 2016 | Integrated evaluation system for the strategic management of innovation initiatives in manufacturing industries
Kohl, H.; Orth, R.; Riebartsch, O.; Hecklau, F. | Journal Article, Conference Paper |
| 2016 | Integrierte Strategieentwicklung
Will, Markus | Book Article |
| 2016 | Intelligentes Elektroniksystem für Condition Monitoring in Industrie 4.0
Uhlmann, E.; Laghmouchi, A.; Ehrenpfordt, R.; Hohwieler, E.; Geisert, C. | Journal Article |
| 2016 | Inter‐organizational network management in an innovation context: Combining ego and whole network perspective
Cap, Jan-Patrick; Blaich, Erik; Kohl, Holger; Raesfeld, Ariane von; Harms, Rainer; Will, Markus | Conference Paper |
| 2016 | Investigations on vibration-assisted EDM-machining of seal slots in high-temperature resistant materials for turbine components. Part II
Uhlmann, E.; Domingos, D.C. | Conference Paper, Journal Article |
| 2016 | Konzepte zur energieautarken Kühlung von Lineardirektantrieben
Uhlmann, E.; Salein, S. | Journal Article |
| 2016 | Kundenindividuelle Produktion durch intelligente Vernetzung
Uhlmann, E. | Journal Article |
| 2016 | Laser based spot weld characterization
Jonietz, Florian; Myrach, Philipp; Rethmeier, Michael; Suwala, Hubert; Ziegler, Mathias | Conference Paper |
| 2016 | Laser beam weldability of high-manganese austenitic and duplex stainless steel sheets
Quiroz, V.; Gumenyuk, A.; Rethmeier, M. | Journal Article |
| 2016 | Laser metal deposition as repair technology for a gas turbine burner made of Inconel 718
Petrat, Torsten; Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael | Journal Article, Conference Paper |
| 2016 | Low heat input gas metal arc welding for dissimilar metal weld overlays part I: The heat-affected zone
Frei, Julian; Alexandrov, Boian T.; Rethmeier, Michael | Journal Article |
| 2016 | Machining of Carbon and Glass Fibre Reinforced Composites
Uhlmann, E.; Sammler, F.; Richarz, S.; Reucher, G.; Hufschmied, R.; Frank, A.; Stawiszynski, B.; Protz, F. | Journal Article, Conference Paper |
| 2016 | Machining of hygroscopic materials by high-pressure CO2 jet cutting
Uhlmann, E.; Bilz, M.; Mankiewicz, J.; Motschmann, S.; John, P. | Conference Paper, Journal Article |
| 2016 | Manufacturing, replication and assessment of microfluidics for blood plasma separation
Uhlmann, Eckart; Hein, Christoph; Polte, Mitchel; Polte, Julian; Spielvogel, Anja; Huth-Herms, Katrin; Oberschmidt, Dirk | Conference Paper |
| 2016 | Methode auf Knopfdruck
Schober, J.; Lünnemann, P.; Jochem, R.; Stark, R. | Journal Article |
| 2016 | Mikro- und Makrozerspanung von PM-Stählen
Uhlmann, Eckart; Richarz, Sebastian; Oberschmidt, Dirk | Conference Paper |
| 2016 | Mittel gegen die Doppelbelastung
Jochem, R.; Behmer, F. | Journal Article |
| 2016 | Model integration for managing dependencies between heterogeneous engineering data
Woll, Robert; Hayka, Haygazun; Stark, Rainer | Conference Paper |
| 2016 | Model predictive control as a service - concept and architecture for use in cloud-based robot control
Vick, A.; Guhl, J.; Krüger, J. | Conference Paper |
| 2016 | Modellbasierte Prozessoptimierung für das Mikrofräsen
Mahr, Frederik Felix
: Uhlmann, Eckart | Dissertation |
| 2016 | Modellbasiertes Systems Engineering - Neue Perspektiven für Systems Engineering
Stark, Rainer; Rothenburg, Uwe; Sünnetcioglu, Atakan | Journal Article |
| 2016 | Modelling and simulation of grinding processes with mounted points. Part I of II
Uhlmann, E.; Koprowski, S.; Weingaertner, W.L.; Rolon, D.A. | Conference Paper, Journal Article |
| 2016 | Modelling and simulation of grinding processes with mounted points. Part II of II
Uhlmann, E.; Koprowski, S.; Weingaertner, W.L.; Rolon, D.A. | Conference Paper, Journal Article |
| 2016 | ModelTracer: User-friendly traceability for the development of mechatronic products
Sünnetcioglu, Atakan; Brandenburg, Elisabeth; Rothenburg, Uwe; Stark, Rainer | Journal Article, Conference Paper |
| 2016 | Modulare Fertigungsmanagementsysteme für Kundenauftragsindividuellen Prozesse
Knothe, T.; Orth, R.; Gering, P.; Wintrich, N. | Journal Article |
| 2016 | Motion Tracking Applied in Assembly for Worker Training in different Locations
Müller, B.C.; Nguyen, T.D.; Dang, Q.-V.; Duc, B.M.; Seliger, G.; Krüger, J.; Kohl, H. | Journal Article, Conference Paper |
| 2016 | Movement visualisation in virtual reality rehabilitation of the lower limb: A systematic review
Ferreira dos Santos, L.; Christ, O.; Mate, K.; Schmidt, H.; Krüger, J.; Dohle, C. | Journal Article, Conference Paper |
| 2016 | Nachhaltige Unternehmensentwicklung aus ressourcenorientierter Perspektive
Orth, Ronald
: Kohl, Holger | Dissertation |
| 2016 | A New Framework for Strategic Risk Analysis in a Global Pump Manufacturing Network
Niknejad, A.; Petrovic, D.; Popplewell, K.; Jäkel, F.W.; Pajkovska-Goceva, S. | Conference Paper |
| 2016 | Niedrigdimensionale Modelle zur Simulation des dynamischen Verhaltens von Werkzeugmaschinen unter Berücksichtigung der Pose
Wintering, Jens Hermann
: Uhlmann, Eckart | Dissertation |
| 2016 | A novel excitation method for pyroshock simulation
Houshmand, B.; Lacher, A.; Juengel, N.; Prasol, L.; Wagner, U. von; Uhlmann, E. | Journal Article |
| 2016 | A novel leaf sequencing optimization algorithm which considers previous underdose and overdose events for MLC tracking radiotherapy. Technical Note
Wisotzky, E.; O'Brien, R.; Keall, P.J. | Journal Article |
| 2016 | Numerical assessment and experimental verification of the influence of the Hartmann effect in laser beam welding processes by steady magnetic fields
Bachmann, M.; Avilov, V.; Gumenyuk, A.; Rethmeier, M. | Journal Article |
| 2016 | Numerical sensitivity analysis of TRIP-parameter K on weld residual stresses for steel S355J2+ N
Neubert, S.; Pittner, A.; Rethmeier, M. | Journal Article |
| 2016 | Numerical simulation of solidification crack formation during laser beam welding of austenitic stainless steels under external load
Bakir, N.; Gumenyuk, A.; Rethmeier, M. | Journal Article |
| 2016 | Nutzenoptimierter Einsatz präventiver Qualitätsmethoden im Produktentstehungsprozess der Automobilindustrie
Heintzmann, Markus
: Jochem, Roland | Dissertation |
| 2016 | Online Fault-monitoring in Machine Tools Based on Energy Consumption Analysis and Non-invasive Data Acquisition for Improved Resource-efficiency
Emec, S.; Krüger, J.; Seliger, G. | Journal Article, Conference Paper |
| 2016 | Online platform for conducting responsible research and innovations
Ajami, M.; Grabner, L.; Giambene, G.; Le, V.; Luong, D.; Pearson, J. | Conference Paper |
| 2016 | Open Source CNC-Maschinensteuerung für die Trockenfunkenbahnerosion
Uhlmann, E.; Perfilov, I.; Schimmelpfennig, T.-M. | Journal Article |
| 2016 | People are at the focus: Personal KM in an organizational context
Haunschild, Johanna; Schmieg, Hans Georg; Steinhöfel, Erik | Conference Paper |
| 2016 | Personenzertifizierung für PLM-Verantwortliche
Woll, Robert; Kugelmeier, Dorothea; Hayka, Haygazun | Electronic Publication |
| 2016 | Planning and reorganising quality management organisations – An empirical analysis of current practice
Behmer, F.; Jochem, R.; Hanke, H. | Journal Article |
| 2016 | PLM Professional - Entstehung einer Disziplin
Stark, Rainer; Adolphy, Sebastian; Woll, Robert | Journal Article |
| 2016 | Portable hands-free process assistant for gas turbine maintenance
Brandenburg, Elisabeth; Woll, Robert; Stark, Rainer | Journal Article |
| 2016 | A Pragmatic Modeling Approach in Abrasive Flow Machining for Complex-Shaped Automotive Components
Uhlmann, E.; Mihotovic, V.; Roßkamp, S.; Dethlefs, A. | Journal Article, Conference Paper |
| 2016 | Principles for Interconnection of Modular Machine Tool Frames
Uhlmann, E.; Saoji, M.; Peukert, B. | Journal Article, Conference Paper |
| 2016 | PRoCeeD: Process state prediction for CRITIS using process inherent causal data and discrete event models
Horn, C.; Krüger, J. | Conference Paper |
| 2016 | Process Behaviour of Super-hard Cutting Materials for Machining Mineral Cast
Uhlmann, E.; Kaulfersch, F. | Journal Article, Conference Paper |
| 2016 | Process chains for high-precision components with micro-scale features
Uhlmann, E.; Mullany, B.; Biermann, D.; Rajurkar, K.P.; Hausotte, T.; Brinksmeier, E. | Journal Article |
| 2016 | Process-oriented design methodology for the (inter-) organizational intellectual capital management
Galeitzke, Mila; Oertwig, Nicole; Orth, Ronald; Kohl, H. | Journal Article, Conference Paper |
| 2016 | Product development in collaborative networks - An expert view on current challenges and future trends
Wang, Wei Min; Lünnemann, Pascal; Neumeyer, Sebastian; Hayka, Haygazun; Stark, Rainer | Conference Paper |
| 2016 | Prototype for enhanced product data acquisition based on inherent features in logistics
Fechteler, M.; Schlüter, M.; Krüger, J. | Conference Paper |
| 2016 | Prozessauslegung zum Schnellhubschleifen von Hochleistungskeramik
Sammler, Christoph
: Uhlmann, Eckardt | Dissertation |
| 2016 | Prozessmodell für selektives Laserstrahlschmelzen
Uhlmann, E.; Pastl Pontes, R.; Bergmann, A. | Journal Article |
| 2016 | Qualitätsreferenzmodell für die Produktion von Unikaten und Kleinserien
Rößle, Dominik
: Krüger, Jörg; Jochem, R.; Woll, Ralf | Dissertation |
| 2016 | Quantitative Betriebsmittelbedarfsplanung für die getaktete Fließfertigung
Dinse, Jakob
: Stark, Rainer | Dissertation |
| 2016 | Reference ontologies to support the development of global production network systems
Palmer, C.; Urwin, E.N.; Pinazo-Sanchez, J.M.; Sánchez Cid, F.; Palacios Rodriguez, E.; Pajkovska-Goceva, S.; Marr Young, R.I. | Journal Article |
| 2016 | Ein Referenzmodell für Wissensmanagement
Mertins, Kai; Kohl, Ina; Orth, Ronald | Book Article |
| 2016 | Reflections and early evidence of the importance of presence for three types of feedback in virtual motor rehabilitation
Schüler, T.; Santos, L.F. dos; Hoermann, S. | Book Article |
| 2016 | Resource optimized product design - assessment of a product's life cycle resource efficiency by combining LCA and PLM in the product development
Ko, Nathanael; Graf, Roberta; Buchert, Tom; Kim, Marcus; Wehner, Daniel | Journal Article, Conference Paper |
| 2016 | A retrofitting concept for integration of machinery with legacy interfaces into cloud manufacturing architectures
Horn, C.; Krüger, J. | Conference Paper |
| 2016 | Seamless Interrelation Between Business Strategies and Tactical Planning
Jäkel, F.-W.; Schlosser, S.; Otto, B.; Petrovic, D.; Niknejad, A. | Conference Paper |
| 2016 | Sensitivity analysis of the residual stress state in friction stir welding of high strength aluminum alloy
Bachmann, M.; Rethmeier, M.; Wu, C.S. | Journal Article |
| 2016 | Simulationsgestützte Methoden und Tools für die virtuelle Absicherung flexibler Bauteile in der Automobilentwicklung
Hofheinz, N.; Brandenburg, E.; Stark, R. | Journal Article |
| 2016 | Situation adapted field service support using business process models and ICT based human-machine-interaction
Uhlmann, E.; Geisert, C.; Raue, N.; Gabriel, C. | Journal Article, Conference Paper |
| 2016 | SMART Engineering im Kontext Indsutrie 4.0: Baukastensysteme für die erlebbare Absicherung von Montageanlagen
Kind, Simon; Exner, Konrad; Stark, Rainer; Neumeyer, Sebastian | Conference Paper |
| 2016 | Solutions for sustainable machining
Uhlmann, E.; Peukert, B.; Thom, S.; Prasol, L.; Fürstmann, P.; Sammler, F.; Richarz, S. | Conference Paper |
| 2016 | Stellgrößen beim Doppelseitenplanschleifen mit Planetenkinematik
Uhlmann, E.; List, M.; Lichtschlag, L. | Journal Article |
| 2016 | Steuerungstechnik aus der Cloud
Kretschmer, Felix; Borisov, Alexander; Pöschko, Reiner; Chemnitz, Moritz; Vick, Axel | Journal Article |
| 2016 | Strahlschneiden mit flüssigem CO2 als Strahlmedium
Uhlmann, E.; John, P.; Mankiewicz, J. | Journal Article |
| 2016 | Strategien zur Erreichung eines konstanten Volumenaufbaus bei der additiven Fertigung mittels Laser-Pulver-Auftragschweißen
Petrat, Torsten; Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael | Conference Paper |
| 2016 | Studie Wissensstandort Deutschland
Kohl, Holger; Orth, Ronald; Steinhöfel, Erik | Book Article |
| 2016 | Studie zur "Zukunft der unternehmensübergreifenden Kollaboration"
Neumeyer, Sebastian; Müller, Patrick; Lünnemann, Pascal; Wang, Wie-Min; Hayka, Haygazun; Stark, Rainer | Journal Article |
| 2016 | Surface reproduction accuracy of holographic design features for machine components fabricated by a combination of TiN-physical vapour deposition and a specific subsequent galvanic process
Uhlmann, Eckart; Oberschmidt, Dirk; Frenzel, Stephanie; Polte, Julian; Matthiesen, Johannes; Böge, Manfred | Conference Paper |
| 2016 | Surgical navigation with QR codes
Katanacho, Manuel; Cadena, Wladimir de la; Engel, Sebastian | Journal Article |
| 2016 | Sustainability Factors for PSS Business Models
Barquet, A.P.; Seidel, J.; Seliger, G.; Kohl, H. | Journal Article |
| 2016 | Sustainable product service systems - from concept creation to the detailing of a business model for a bicycle sharing system in Berlin
Barquet, Ana Paula; Seidel, Johannes; Buchert, Tom; Galeitzke, Mila; Neugebauer, Sabrina; Oertwig, Nicole; Rozenfeld, Henrique; Seliger, Günther | Journal Article, Conference Paper |
| 2016 | Sustainable Welding Process Selection Based on Weight Space Partitions
Sproesser, G.; Schenker, S.; Pittner, A.; Borndörfer, R.; Rethmeier, M.; Chang, Y.-J.; Finkbeiner, M. | Journal Article, Conference Paper |
| 2016 | Systems Engineering im Kontext der unternehmensübergreifenden Produktentwicklung
Neumeyer, Sebastian; Lünnemann, Pascal; Woll, Robert | Conference Paper |
| 2016 | Trockenfunkenerosives Feinbohren von Hochleistungswerkstoffen
Schimmelpfennig, Tassilo-Maria
: Uhlmann, Eckart | Dissertation |
| 2016 | Trust restoration in workplace relationships: Multi-level analysis of (Mis)trusting
Ikonen, M.; Savolainen, T.; Lopez-Fresno, P.; Kohl, H. | Conference Paper |
| 2016 | Twisted deep hole drilling tools for hard machining
Uhlmann, E.; Richarz, S. | Journal Article |
| 2016 | Two steps to IT transparency: A practitioner’s approach for a knowledge based analysis of existing IT landscapes in SME
Kohl, Holger; Orth, Ronald; Haunschild, Johanna; Schmieg, Hans Georg | Conference Paper |
| 2016 | Using process models to support customer specific production processes
Dennert, A.; Wollschlaeger, M.; Gering, P.; Knothe, T.; Lemcke, A. | Conference Paper |
| 2016 | Using RGB-D sensors for the detection of abandoned luggage
Ajami, M.; Lang, B. | Conference Paper |
| 2016 | Utilization of Thermal Energy to Compensate Quasi-static Deformations in Modular Machine Tool Frames
Uhlmann, E.; Saoji, M.; Peukert, B. | Journal Article, Conference Paper |
| 2016 | Verfahren zur schnellen, digitalen Modellbildung für Inspektions- und Reengineeringprozesse
Grosser, Hendrik
: Stark, R. | Dissertation |
| 2016 | Virtual prototyping and validation of CPPS within a new software framework
Neumeyer, Sebastian; Exner, Konrad; Kind, Simon; Hayka, Haygazun; Stark, Rainer | Conference Paper |
| 2016 | Welding with high-power lasers: Trends and developments
Bachmann, M.; Gumenyuk, A.; Rethmeier, M. | Journal Article, Conference Paper |
| 2016 | Werkzeugschleifen mit Hybridschleifscheiben
Uhlmann, E.; Schröer, N. | Journal Article |
| 2016 | Wissen erfolgreich bewahren
Wuscher, Sven
: Kohl, Holger (Hrsg.) | Book |
| 2016 | Wissensbewahrung ausscheidender Mitarbeiter
Wuscher, Sven; Voigt, Stefan; Fischer, Martin | Book Article |
| 2016 | Wissensbilanz
Mertins, Kai; Will, Markus; Orth, Ronald | Book Article |
| 2016 | Wissensmamangement im Enterprise 2.0
Voigt, Stefan; Steinhöfel, Erik | Book Article |
| 2016 | Wissensmanagement im Mittelstand
: Kohl, Holger (Hrsg.); Mertins, Kai (Hrsg.); Seidel, H. (Hrsg.) | Book |
| 2016 | Wissensmanagement in Expertennetzwerken
Lackhove, Josef; Hanke, Joachim; Orth, Ronald | Book Article |
| 2016 | Wissensmanagement mit Wiki-Systemen
Voigt, Stefan; Orth, Ronald | Book Article |
| 2016 | Wissensorientierte Analyse und Gestaltung von Geschäftsprozessen
Orth, Ronald; Mertins, Kai | Book Article |
| 2016 | Wissenssicherung bei BASF: Wie der Chemiekonzern den demografischen Wandel meistert
Stautmeister, René; Hattendorff, Jutta; Wuscher, Sven | Journal Article |
| 2016 | Der WM-Prozessassistent
Orth, Ronald; Wintrich, Nikolaus | Book Article |
| 2016 | The working posture controller: Automated adaptation of the work piece pose to enable a natural working posture
Nguyen, T.D.; Bloch, C.; Krüger, J. | Journal Article, Conference Paper |
| 2016 | Zukunft der unternehmensübergreifenden Kollaboration
Lünnemann, Pascal; Müller, Patrick; Neumeyer, Sebastian; Wang, Wei Min; Hayka, Haygazun; Kirsch, Lucas
: Drewinksi, Roland (Hrsg.); Hayka, Haygazun (Hrsg.); Müller, Patrick (Hrsg.); Stark, Rainer (Hrsg.) | Study |
| 2016 | Die Zukunft der unternehmensübergreifenden Produktentwicklung
Neumeyer, Sebastian; Hayka, Haygazun; Stark, Rainer | Book Article |
| 2016 | Zustandsüberwachung in der Cloud
Uhlmann, E.; Laghmouchi, A.; Hohwieler, E.; Geisert, C. | Journal Article |