| | |
|---|
| 2020 | Additive Fertigung von Bauteilen aus Rein-Kupfer mittels SLM und "grüner" Laserstrahlung. Schlussbericht
Heussen, Daniel | Report |
| 2020 | Classification of challenging Laser-Induced Breakdown Spectroscopy soilsample data - EMSLIBS contest
Vrábel, Jakub; Képeš, Erik; Duponchel, Ludovik; Motto-Ros, Vincent; Fabred, Cécile; Connemann, Sven; Schreckenberg, Frederik; Prasse, Paul; Riebe, Daniel; Junjuri, Rajendhar; Gundawarh, Manoj Kumar; Tan, Xiaofeng; Pořízka, Pavel; Kaiser, Jozef | Journal Article |
| 2020 | Combined Al and C alloying enables mechanism-oriented design of multi-principal element alloys
Kies, Fabian; Ikeda, Yuji; Ewald, Simon; Schleifenbaum, Johannes Henrich; Hallstedt, Bengt; Körmann, Fritz; Haase, Christian | Journal Article |
| 2020 | Comparative investigations into microstructural and mechanical properties of as‐cast and laser powder bed fusion (LPBF) fabricated duplex steel (1.4517)
Raffeis, I.; Vroomen, U.; Adjei-Kyeremeh, F.; Großmann, D.; Hammelrath, H.; Westhoff, E.; Bremen, S.; Boscolo Bozza, D.; Bührig-Polaczek, A. | Journal Article |
| 2020 | Control of thermally stable core-shell nano-precipitates in additively manufactured Al-Sc-Zr alloys
Kürnsteiner, P.; Bajaj, P.; Gupta, A.; Wilms, M.B.; Weisheit, A.; Li, X.; Leinenbach, C.; Gault, B.; Jägle, E.A.; Raabe, D. | Journal Article |
| 2020 | Defect formation and prevention in directed energy deposition of high-manganese steels and the effect on mechanical properties
Kies, Fabian; Wilms, Markus Benjamin; Pirch, Norbert; Pradeep, Konda Gokuldoss; Schleifenbaum, Johannes Henrich; Haase, Christian | Journal Article |
| 2020 | Design of multi-beam optics for high throughput parallel processing
Hofmann, Oskar; Stollenwerk, Jochen; Loosen, Peter | Journal Article |
| 2020 | Diode-pumped cw Alexandrite laser with temporally stable 6.5 W in TEM00 operation with prospect of power scaling
Walochnik, Martin Andreas; Jungbluth, Bernd; Huber, Hans; Ammersbach, Jana; Munk, Alexander; Strotkamp, Michael; Traub, Martin; Hoffmann, Dieter; Poprawe, Reinhart | Journal Article |
| 2020 | Efficient production of design textures on large-format 3D mold tools
Brenner, A.; Zecherle, M.; Verpoort, S.; Schuster, K.; Schnitzler, C.; Kogel-Hollacher, M.; Reisacher, M.; Nohn, B. | Journal Article |
| 2020 | Electrical Modelling and Investigation of Laser Beam Welded Joints for Lithium-Ion Batteries
Hollatz, Sören; Kremer, Sebastian; Ünlübayir, Cem; Sauer, Dirk Uwe; Olowinsky, Alexander; Gillner, Arnold | Journal Article |
| 2020 | Experimental investigation on a new hybrid laser process for surface structuring by vapor pressure on Ti6Al4V
Temmler, A.; Liu, D.M.; Drinck, S.; Luo, J.B.; Poprawe, R. | Journal Article |
| 2020 | Experimentelle und modelltheoretische Untersuchungen zum Extremen Hochgeschwindigkeits-Laserauftragschweißen
Schopphoven, Thomas
: Poprawe, R.; Zäh, M. | Dissertation |
| 2020 | Fiber Bragg gratings in active multimode XLMA fibers for high-power kW-class fiber lasers
Klein, S.; Giesberts, M.; Baer, P.; Raguse, M.; Fitzau, O.; Traub, M.; Hoffmann, H.-D.; Krause, V.; Rehmann, G. | Conference Paper |
| 2020 | Formability analysis of micro-alloyed sheet metals reinforced by additive manufacturing
Hama-Saleh, R.; Weisheit, A.; Schleifenbaum, J.H.; Ünsal, I.; Sviridov, A.; Bambach, M. | Journal Article, Conference Paper |
| 2020 | Fraunhofer DDMC 2020 special issue of the progress in additive manufacturing journal. Editorial
Brückner, Frank; Bremen, Sebastian; Müller, Bernhard | Journal Article, Conference Paper |
| 2020 | Gemeinsamer Abschlussbericht zum KMU-Innovativ Verbundprojekt Entwicklung einer Produktionstechnologie zum drahtbasierten 3D-Drucken von Metallbauteilen -3DMetalWire-
| Report |
| 2020 | High-precision ultrashort pulsed laser processing of metal foils using an advanced multibeam optic
Barthels, T.; Niessen, M.; Reininghaus, M.; Wang, Y. | Conference Paper |
| 2020 | High-throughput micromachining with ultrashort pulsed lasers and multiple spots
Brüning, Stephan Erich; Du, Keming; Jarczynski, Manfred; Gillner, Arnold | Journal Article |
| 2020 | Highly stable, high power hybrid fiber and Innoslab amplifier for narrow linewidth signals
Cebeci, P.; Mosquera, J.V.; Höfer, M.; Fitzau, O.; Giesberts, M.; Erben, B.; Hoffmann, H.-D. | Conference Paper |
| 2020 | Identifikation von Prozessfehlern
Knaak, Christian; Abels, Peter | Journal Article |
| 2020 | Impact of Stereotactic Ventriculocisternostomy on Delayed Cerebral Infarction and Outcome After Subarachnoid Hemorrhage
Roelz, R.; Schaefer, J.H.; Scheiwe, C.; Sajonz, B.; Csok, I.; Steiert, C.; Buttler, J.; Rohr, E.; Grauvogel, J.; Shah, M.J.; Egger, K.; Niesen, W.-D.; Bardutzky, J.; Beck, J.; Coenen, V.A.; Reinacher, P.C. | Journal Article |
| 2020 | Influence of keyhole and conduction mode melting for top-hat shaped beam profiles in laser powder bed fusion
Tenbrock, Christian; Fischer, Felix Gabriel; Wissenbach, Konrad; Schleifenbaum, Johannes Henrich; Wagenblast, Philipp; Meiners, Wilhelm; Wagner, Joachim | Journal Article |
| 2020 | Influence of laser polishing on surface roughness and microstructural properties of the remelted surface boundary layer of tool steel H11
Temmler, A.; Liu, D.; Preußner, J.; Oeser, S.; Luo, J.; Poprawe, R.; Schleifenbaum, J.H. | Journal Article |
| 2020 | Influence of pulse duration and pulse frequency on micro-roughness for laser micro polishing (LµP) of stainless steel AISI 410
Temmler, A.; Liu, D.; Luo, J.; Poprawe, R. | Journal Article |
| 2020 | Inverse Produktion für nachhaltige Wertstoffkreisläufe – Aktuelle Entwicklungen zur automatisierten Demontage und Entstückung von Elektronikplatinen
Noll, Reinhard; Bergmann, Klaus; Fricke-Begemann, Cord; Schreckenberg, Frederik | Journal Article |
| 2020 | Investigation of heating behavior of laser beam on powder stream in directed energy deposition
Tan, H.; Fang, Y.; Zhong, C.; Yuan, Z.; Fan, W.; Li, Z.; Chen, J.; Lin, X. | Journal Article |
| 2020 | Investigation on the mechanism of surface structure formation during laser remelting with modulated laser power on tool steel H11
Temmler, A.; Pirch, N. | Journal Article |
| 2020 | Investigations on the influence of beam shaping in laser transmission welding of multi-layer polymer films with wavelength-adapted diode laser beam sources
Brosda, M.; Nguyen, P.; Olowinsky, A.; Gillner, A. | Conference Paper |
| 2020 | Laser Metal Deposition of Ti6Al4V-A Brief Review
Zhong, Chongliang; Liu, Jianing; Zhao, Tong; Schopphoven, Thomas; Fu, Jinbao; Gasser, Andres; Schleifenbaum, Johannes Henrich | Journal Article |
| 2020 | Laser polishing using ultrashort pulse laser
Brenner, A.; Röther, L.; Osbild, M.; Finger, J. | Conference Paper |
| 2020 | Laser transmission welding of absorber-free semi-crystalline polypropylene by using a quasi-simultaneous irradiation strategy
Nguyen, Nam Phong Andrej; Behrens, Stefan; Brosda, Maximilian; Olowinsky, Alexander; Gillner, Arnold | Journal Article |
| 2020 | Laser welding of laser-structured copper connectors for battery applications and power electronics
Helm, J.; Schulz, A.; Olowinsky, A.; Dohrn, A.; Poprawe, R. | Journal Article |
| 2020 | Laser-Based Additive Manufacturing of WC-Co with High-Temperature Powder Bed Preheating
Fries, S.; Genilke, S.; Wilms, M.B.; Seimann, M.; Weisheit, A.; Kaletsch, A.; Bergs, T.; Schleifenbaum, J.H.; Broeckmann, C. | Journal Article |
| 2020 | Mechanical behaviour of additive manufactured 316L f2ccz lattice structure under static and cyclic loading
Ashouri, D.; Voshage, M.; Burkamp, K.; Kunz, J.; Bezold, A.; Schleifenbaum, J.H.; Broeckmann, C. | Journal Article |
| 2020 | Mechanical Properties of High-Speed Steel AISI M50 Produced by Laser Powder Bed Fusion
Kunz, J.; Saewe, J.; Herzog, S.; Kaletsch, A.; Schleifenbaum, J.H.; Broeckmann, C. | Journal Article, Conference Paper |
| 2020 | The microstructure evolution and tensile properties of Inconel 718 fabricated by high-deposition-rate laser directed energy deposition
Li, Zuo; Chen, Jing; Sui, Shang; Zhong, Chongliang; Lu, Xufei; Lin, Xin | Journal Article |
| 2020 | Nanoscale grating characterization through EUV spectroscopy aided by machine learning techniques
Bahrenberg, L.; Glabisch, S.; Danylyuk, S.; Ghafoori, M.; Schröder, S.; Brose, S.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2020 | New hybrid manufacturing routes combining forging and additive manufacturing to efficiently produce high performance components from Ti-6Al-4V
Meiners, F.; Ihne, J.; Jürgens, P.; Hemes, S.; Mathes, M.; Sizova, I.; Bambach, M.; Hama-Saleh, R.; Weisheit, A. | Journal Article, Conference Paper |
| 2020 | Novel high-contrast phase-shifting masks for EUV interference lithography
Lüttgenau, B.; Brose, S.; Danylyuk, S.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2020 | Optimizing the antimicrobial performance of metallic glass composites through surface texturing
Villapún, V.M.; Qu, B.; Lund, P.A.; Wei, W.; Dover, L.G.; Thompson, J.R.; Adesina, J.O.; Hoerdemann, C.; Cox, S.; González, S. | Journal Article |
| 2020 | Overlap joining of aluminium and copper using laser micro welding with spatial power modulation
Hollatz, S.; Heinen, P.; Limpert, E.; Olowinsky, A.; Gillner, A. | Journal Article |
| 2020 | Picosecond laser source at 3.4 microns for laser material processing of polymers
Nyga, S.; Jungbluth, B.; Elsen, F.; Röhrig, A.; Hoffmann, H.-D. | Conference Paper |
| 2020 | Präzisionsbearbeitung von Keramiken mit Ultrakurzpulslasern
Kalupka, C.; Finger, J. | Journal Article |
| 2020 | Printability and microstructural evolution of a near-eutectic three-phase V-based alloy
Schmelzer, J.; Rittinghaus, S.-K.; Gruber, K.; Veit, P.; Weisheit, A.; Krüger, M. | Journal Article |
| 2020 | Process development for tip repair of complex shaped turbine blades with IN718
Ünal-Saewe, T.; Gahn, L.; Kittel, J.; Gasser, A.; Schleifenbaum, J.H. | Journal Article, Conference Paper |
| 2020 | Qualification of a Ni-Cu alloy for the laser powder bed fusion process (LPBF): Its microstructure and mechanical properties
Raffeis, I.; Adjei-Kyeremeh, F.; Vroomen, U.; Westhoff, E.; Bremen, S.; Hohoi, A.; Bührig-Polaczek, A. | Journal Article |
| 2020 | Statistical/numerical model of the powder-gas jet for extreme high-speed laser material deposition
Schopphoven, T.; Pirch, N.; Mann, S.; Poprawe, R.; Häfner, C.L.; Schleifenbaum, J.H. | Journal Article |
| 2020 | Studies on the effect of composition and pre-heating on microstructure and mechanical properties of direct laser clad titanium aluminide
Weisheit, A.; Rittinghaus, S.-K.; Dutta, A.; Majumdar, J.D. | Journal Article |
| 2020 | Ultrafine Fe-Fe2Ti eutectics by directed energy deposition: Insights into microstructure formation based on experimental techniques and phase field modelling
Requena, G.; Bugelnig, K.; Sket, F.; Milenkovic, S.; Rödler, G.; Weisheit, A.; Gussone, J.; Haubrich, J.; Barriobero-Vila, P.; Pusztai, T.; Gránásy, L.; Theofilatos, A.; Silva, J.C. da; Hecht, U. | Journal Article |
| 2020 | Verfahren zum Abbau von Schadstoffen in Wasser
Bergmann, Klaus; Vieker, Jochen | Patent |
| 2020 | Verfahren zum Glätten der Oberfläche eines Kunststoffbauteils
Braun, Karsten; Willenborg, Edgar; Weingarten, Christian | Patent |
| 2019 | Absorber-Free Quasi-Simultaneous Laser Welding for Microfluidic Applications
Nguyen, Nam Phong Andrej; Brosda, Maximilian; Olowinsky, Alexander; Gillner, Arnold | Journal Article |
| 2019 | Absorber-free quasi-simultaneous laser welding of transparent microfluidic devices
Nguyen, Nam Phong Andrej; Brosda, Maximilian; Olowinsky, Alexander; Gillner, Arnold | Conference Paper |
| 2019 | Accounting for laser beam characteristics in the design of freeform optics for laser material processing
Völl, Annika; Wester, Rolf; Berens, Michael; Buske, Paul; Stollenwerk, Jochen; Loosen, Peter | Journal Article |
| 2019 | Adaption of Energy Deposition in Helical Drilling of Multidimensional Micro Holes Using Ultrashort Laser Pulses
He, C.; Esch, D.; Gillner, A. | Journal Article |
| 2019 | Additive manufactured WE43 magnesium: A comparative study of the microstructure and mechanical properties with those of powder extruded and as-cast WE43
Zumdick, N.A.; Jauer, L.; Kersting, L.C.; Kutz, T.N.; Schleifenbaum, J.H.; Zander, D. | Journal Article |
| 2019 | Additive manufacturing of biodegradable metals: Current research status and future perspectives
Qin, Y.; Wen, P.; Guo, H.; Xia, D.; Zheng, Y.; Jauer, L.; Poprawe, R.; Voshage, M.; Schleifenbaum, J.H. | Journal Article |
| 2019 | Additive manufacturing of biodegradable Zn-xWE43 porous scaffolds: Formation quality, microstructure and mechanical properties
Qin, Y.; Wen, P.; Voshage, M.; Chen, Y.; Schückler, P.G.; Jauer, L.; Xia, D.; Guo, H.; Zheng, Y.; Schleifenbaum, J.H. | Journal Article |
| 2019 | Alexandrite laser in Q-switched single longitudinal mode operation pumped by a fiber-coupled diode module
Munk, A.; Jungbluth, B.; Strotkamp, M.; Hoffmann, D.; Poprawe, R.; Höffner, J. | Conference Paper |
| 2019 | Application of Atom Probe Tomography to Complex Microstructures of Laser Additively Manufactured Samples
Kürnsteiner, Philipp; Hariharan, Avinash; Jung, Hyo Yun; Peter, Nicolas; Wilms, Markus Benjamin; Weisheit, Andreas; Barriobero-Vila, Pere; Gault, Baptiste; Raabe, Dierk; Jägle, Eric Aimé | Journal Article |
| 2019 | Asymptotic bore hole model for ultrashort pulse laser-drilled carbon fiber preforms
Janssen, Stefan; Kürschner, Dorian; Hermanns, Torsten; Schulz, Wolfgang | Conference Paper |
| 2019 | Automated joining of hybridmetal-thermoplastic composite structures
Engelmann, Christoph; Gardiner, Ginger; Voithofer, Johannes; Popow, Vitalij; Weidmann, Stefan; Eckstädt, Johannes | Journal Article |
| 2019 | Cargo shuttling by electrochemical switching of core-shell microgels obtained by a facile one-shot polymerization
Mergel, Olga; Schneider, Sabine; Tiwari, Rahul; Kühn, Philipp T.; Keskin, Damla; Stuart, Marc C.A.; Schöttner, Sebastian; Kanter, Martinus Jacobus Maria de; Noyong, Michael; Caumanns, Tobias; Mayer, Joachim; Janzen, Christoph; Simon, Ulrich; Gallei, Markus; Wöll, Dominik; Rijn, Patrick van; Plamper, Felix A. | Journal Article |
| 2019 | Cavity-enhanced noncollinear high-harmonic generation
Högner, Maximilian; Saule, Tobias; Heinrich, Stephan; Lilienfein, Nikolai; Esser, Dominik; Trubetskov, Michael; Pervak, Volodymyr; Pupeza, Ioachim | Journal Article |
| 2019 | Cavity-Enhanced Noncollinear High-Harmonic Generation
Högner, Maximilian; Saule, Tobias; Heinrich, Stephan; Lilienfein, Nikolai; Esser, Dominik; Trubetskov, Michael; Pervak, Vladimir | Conference Paper |
| 2019 | Characterisation of Additively Manufactured Metallic Stents
Langi, Enzoh; Bisht, Anuj; Silberschmidt, Vadim V.; Ruiz, Pablo D.; Vogt, Felix; Mailto, Lukas; Masseling, Lukas; Zhao, Liguo | Journal Article, Conference Paper |
| 2019 | Characterisation of the optical emisson in laser powder bed fusion process
Duong, Emil; Kröger, Moritz; Thombansen, Ulrich; Knaak, Christian; Abels, Peter | Conference Paper |
| 2019 | CNT-reinforced AlSi10Mg composite by selective laser melting: Microstructural and mechanical properties
Liu, Xihe; Zhao, Congcong; Zhou, Xin; Eibl, Florian; Shen, Zhijian; Liu, Wei; Meiners, Wilhelm | Journal Article |
| 2019 | Cutting of composite materials: A quality and processing time optimized scan strategy for GFRP and CFRP
Schneider, Frank; Petring, Dirk; Wolf, Norbert | Conference Paper |
| 2019 | Deep learning-based semantic segmentation for in-process monitoring in laser welding applications
Knaak, Christian; Kolter, Gerald Manuel; Schulze, Frédéric; Kröger, Moritz; Abels, Peter | Conference Paper |
| 2019 | Delamination crack initiation of laser drilling process for multilayer material system: a reduced modelling approach
Wang, You; Hermanns, Torsten; Nießen, Markus; Janssen, Stefan; Schulz, Wolfgang | Conference Paper |
| 2019 | Demonstration of a compact and universal Doppler Lidar based on a novel diode pumped alexandrite ring laser
Höffner, Josef; Strotkamp, Michael; Munk, Alexander; Jungbluth, Bernd | Conference Paper |
| 2019 | Design and fabrication of a fused 7 × 1 35/50 µm into 125/250 µm fiber combiner
Baer, P.; Cebeci, P.; Giesberts, M.; Fitzau, O. | Journal Article |
| 2019 | Development of a solvent-free polylactide/calcium carbonate composite for selective laser sintering of bone tissue engineering scaffolds
Gayer, Christoph; Ritter, Jessica; Bullemer, Martin; Grom, Stephanie; Meiners, Wilhelm; Pfister, Andreas; Reinauer, Frank; Vučak, Marijan; Wissenbach, Konrad; Fischer, Horst; Poprawe, Reinhart; Schleifenbaum, Johannes Henrich; Jauer, Lucas | Journal Article |
| 2019 | Development of low pressure cold sprayed copper coatings on carbon fiber reinforced polymer (CFRP)
Gillet, Vincent; Aubignat, Emilie; Costil, Sophie; Courant, Bruno; Langlade, Cecile; Casari, Pascal; Knapp, Wolfgang; Planche, Marie Pierre | Journal Article |
| 2019 | Diode-pumped Alexandrite laser instrument for next generation satellite-based Earth observation
Strotkamp, Michael; Munk, Alexander; Jungbluth, Bernd; Hoffmann, Hans-Dieter; Höffner, Josef | Conference Paper |
| 2019 | Diode‑pumped Alexandrite laser for next generation satellite‑based earth observation lidar
Strotkamp, Michael; Munk, Alexander; Jungbluth, Bernd; Hoffmann, Hans-Dieter; Höffner, Josef | Journal Article |
| 2019 | Dissimilar laser beam welding of press hardened stainless martensitic steels and a cold worked stainless TWIP steel
Dahmen, Martin; Deniz, Berkan; Lindner, Stefan; Petring, Dirk | Conference Paper |
| 2019 | Dynamic High-Power Beam-Shaping for 3D Laser Polishing
Hofmann, Oskar; Holters, Martin; Stollenwerk, Jochen; Loosen, Peter | Journal Article, Conference Paper |
| 2019 | Effect of damage incubation in the laser grooving of sapphire
Sakurai, Haruyuki; He, Chao; Konishi, Kuniaki; Tamaru, Hiroharu; Yumoto, Junji; Kuwata-Gonokami, Makoto; Gillner, Arnold | Journal Article |
| 2019 | Effects of Beam Power and Power Density Distribution on Process and Quality Issues during Fiber Laser Cutting of Stainless Steel Sheet Metal
Petring, Dirk; Arntz-Schroeder, Dennis; Stoyanov, Stoyan Dimitrov; Schneider, Frank | Conference Paper |
| 2019 | Equipment and process windows for laser metal deposition with coaxial wire feeding
Kelbassa, Jana; Gasser, Andres; Bremer, Jan; Pütsch, Oliver; Poprawe, Reinhart; Schleifenbaum, Johannes Henrich | Journal Article |
| 2019 | EUV-LET 2.0: A compact exposure tool for industrial research at a wavelength of 13.5nm
Brose, Sascha; Danylyuk, Serhiy; Bahrenberg, Lukas; Lebert, Rainer; Stollenwerk, Jochen; Loosen, Peter; Juschkin, Larissa | Conference Paper |
| 2019 | Evaluation of Offline Path Planning for Laser Metal Deposition on Freeform Surfaces
Bold, Marie-Noemi; Pirch, Norbert; Ziegler, Stephan; Schleifenbaum, Johannes Henrich | Conference Paper |
| 2019 | Extreme High-Speed Laser Material Deposition (EHLA) of AISI 4340 Steel
Li, Tianci; Zhang, Lele; Bultel, Gregor Gille Pierre; Schopphoven, Thomas; Gasser, Andres; Schleifenbaum, Johannes Henrich; Poprawe, Reinhart | Journal Article |
| 2019 | Feasability Investigation for Laser Powder Bed Fusion of High-Speed Steel AISI M50 with Base Preheating System
Saewe, Jasmin; Gayer, Christoph; Vogelpoth, Andreas; Schleifenbaum, Johannes Henrich | Journal Article, Conference Paper |
| 2019 | Formation Quality, Mechanical Properties, and Processing Behavior of Pure Zinc Parts Produced by Laser-Based Manufacturing for Biodegradable Implants
Voshage, Maximilian; Wen, Peng; Schaukellis, Max; Schleifenbaum, Johannes Henrich | Journal Article |
| 2019 | Fraunhofer-Institut für Lasertechnik. Jahresbericht 2018
| Annual Report |
| 2019 | Frequency stabilization of multimode diode lasers with fiber Bragg gratings
Klein, Sarah; Giesberts, Martin; Traub, Martin; Fitzau, Oliver; Hoffmann, Dieter | Conference Paper |
| 2019 | FULAS: High energy laser source for future LIDAR applications
Hahn, S.; Bode, M.; Luttmann, J.; Hoffmann, D. | Conference Paper |
| 2019 | Future AM. Die nächste Generation additiver Fertigungsverfahren
Schleifenbaum, Johannes Henrich; Tenbrock, C.; Emmelmann, Claus; Leyens, Christoph; Brückner, Frank; Michaelis, Alexander | Book Article |
| 2019 | GPU-accelerated wave-optical simulation of beam-transformation system for high-power diode lasers
Adams, Martin; Rauch, Simon; Holly, Carlo; Bussek, Thomas Christian; Traub, Martin; Hoffmann, Dieter | Conference Paper |
| 2019 | Helical drilling of high-aspect-ratio microholes in stainless steel using ultrashort laser pulses
He, Chao; Weber, Malte; Gillner, Arnold | Conference Paper |
| 2019 | High Power Laser Processing with Ultrafast and Multi-Parallel Beams
Gillner, A.; Finger, J.; Gretzki, P.; Niessen, M.; Bartels, T.; Reininghaus, M. | Journal Article |
| 2019 | High-Efficiency Sub-Micrometer Multi-Beam Interference Structuring for Large-Scale Surface Using Ultrashort Laser Pulses
He, Chao; Vannahme, Kai; Gillner, Arnold | Journal Article |
| 2019 | High-flux ultrafast extreme-ultraviolet photoemission spectroscopy at 18.4 MHz pulse repetition rate
Saule, T.; Heinrich, S.; Schötz, J.; Lilienfein, N.; Högner, M.; Vries, O. de; Plötner, M.; Weitenberg, J.; Esser, D.; Schulte, J.; Russbueldt, P.; Limpert, J.; Kling, M.F.; Kleineberg, U.; Pupeza, T. | Journal Article |
| 2019 | High-power 2-micron optical-parametric frequency converter with sub-picosecond pulse duration
Elsen, Florian; Jungbluth, Bernd; Nyga, Sebastian; Wueppen, Jochen; Hoffmann, Hans-Dieter | Conference Paper |
| 2019 | High-Power Optical Parametric Generation and Amplification of Femtosecond Pulses at 2 Microns
Elsen, Florian; Jungbluth, Bernd; Nyga, Sebastian; Wueppen, Jochen; Hoffmann, Dieter | Conference Paper |
| 2019 | High-precision ultrashort pulsed laser drilling of micro and nano holes using multibeam processing
Barthels, Thilo Alexander; Reininghaus, Martin; Westergerling, Holger | Conference Paper |
| 2019 | Highly stable fiber lasers for satellite-based gravitational measurements
Fitzau, O.; Betz, P.; Cebeci, P.; Giesberts, M.; Hoffmann, H.D.; Schiemangk, M.; Wicht, A.; Sanjuan, J.; Dahl, K.; Pyka, S.A.; Kovalchuk, E.; Peters, A. | Conference Paper |
| 2019 | Improvement of the manufacturing process chain of sintered active XLMA fibers and their preforms for use in high power, high efficiency fiber resonators
Langner, A.; Moser, F.; Plass, J.; Schönfeld, D.; Schötz, G.; Brabant, T.; Kuka, G.; Giesberts, M.; Baer, P.; Klein, S.; Fitzau, O.; Hoffmann, H.D.; Rehmann, G.; Krause, V. | Conference Paper |
| 2019 | In situ high speed diagnosis - A quantitative analysis of melt flow dynamics inside cutting kerfs during laser fusion cutting with 1 μm wavelength
Arntz, Dennis; Petring, Dirk; Schneider, Frank; Poprawe, Reinhart | Journal Article |
| 2019 | In-situ analysis of heat accumulation during ultrashort pulsed laser ablation
Bornschlegel, Benedikt; Köller, Jana; Finger, Johannes-Thomas | Conference Paper |
| 2019 | In-Situ Analysis of Ultrashort Pulsed Laser Ablation with Pulse Bursts
Bornschlegel, Benedikt; Finger, Johannes-Thomas | Journal Article |
| 2019 | Increasing Productivity of Ultrashort Pulsed Laser Ablation in Advance for a Combination Process with ns-laser
Brenner, Andreas; Bornschlegel, Benedikt; Finger, Johannes-Thomas | Journal Article |
| 2019 | Increasing resource efficiency with an engineering decision support system for comparison of product design variants
Buchert, Tom; Ko, Nathanael; Graf, Roberta; Vollmer, Thomas; Alkhayat, Moritz; Brandenburg, Elisabeth; Stark, Rainer; Klocke, Fritz; Leistner, Philip; Schleifenbaum, Johannes Henrich | Journal Article |
| 2019 | Industrial photoresist development with the EUV laboratory exposure tool. Mask fabrication, sensitivity and contrast
Brose, Sascha; Danylyuk, Serhiy; Grüneberger, Franziska; Gerngroß, Maik; Stollenwerk, Jochen; Schirmer, Matthias; Loosen, Peter | Conference Paper |
| 2019 | Influence of Carbon Nanotubes on Defects in AlSi10Mg Alloy Fabricated by Selective Laser Melting
Liu, X.H.; Zhao, C.C.; Zhou, X.; Liu, W.; Shen, Z.J.; Eibl, F.; Meiners, W. | Journal Article |
| 2019 | Influence of design and postprocessing parameters on the degradation behavior and mechanical properties of additively manufactured magnesium scaffolds
Kopp, A.; Derra, T.; Müther, M.; Jauer, L.; Schleifenbaum, J.H.; Voshage, M.; Jung, O.; Smeets, R.; Kröger, N. | Journal Article |
| 2019 | Influence of focal length on the laser metal deposition process with coaxial wire feeding
Kelbassa, Jana; Biber, Alexander; Wissenbach, Konrad; Gasser, Andres; Pütsch, Oliver; Loosen, Peter; Schleifenbaum, Johannes Henrich | Conference Paper |
| 2019 | Influence of Laser Energy Input on the Microstructure Development of Additively Manufactured WC-Co Hardmetal
Fries, Sofia; Wilms, Markus Benjamin; Weisheit, Andreas; Kaletsch, Anke; Schleifenbaum, Johannes Henrich; Broeckmann, Christoph | Conference Paper |
| 2019 | Influence of laser parameters on tensile shear strength of copper welds
Eisenreich, Nathanael; Aeckerle, Michael; Bantel, Christoph; Heider, Andreas; Olowinsky, Alexander | Journal Article |
| 2019 | Influence of laser wavelength and beam profile on the coagulation depth in a soft tissue phantom model
Wehner, M.; Betz, P.; Aden, M. | Journal Article |
| 2019 | The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing
Sui, S.; Tan, H.; Chen, J.; Zhong, C.; Li, Z.; Fan, W.; Gasser, A.; Huang, W. | Journal Article |
| 2019 | Influence of self-organizing microstructures on the wettability of molten plastic on steel for hybrid plastic-metal-joints
Straeten, Kira van der; Sparla, Jochen; Olowinsky, Alexander; Gillner, Arnold | Journal Article |
| 2019 | Influence of spatial power modulation on pore and crack formation in laser beam welding of aluminum
Heinen, Paul; Eichler, Florian; Häusler, André; Olowinsky, Alexander; Aden, Mirko; Gillner, Arnold; Poprawe, Reinhart | Journal Article |
| 2019 | Influence of the surface properties of the connector material on the reliable and reproducible contacting of battery cells with a laser beam welding process
Helm, Johanna; Dietz von Bayer, Ingo; Olowinsky, Alexander; Gillner, Arnold | Journal Article |
| 2019 | Innovative Filtermodule für die Abscheidung von Mikroplastik aus Abwasser
Lanfermann, Andea; Barthels, Thilo Alexander; Nießen, Markus; Riester, C.; Klass, G.; Pham, T.-Q.; Steffens, O.; Abels, Peter | Conference Paper |
| 2019 | Interaction of sub-terahertz radiation with low-doped grating-based AlGaN/GaN plasmonic structures
Korotyeyev, V.V.; Lyaschuk, Y.M.; Kochelap, V.A.; Varani, L.; Coquillat, D.; Danylyuk, S.; Brose, S.; Vitusevich, S.A. | Journal Article |
| 2019 | Investigation of fiber Bragg gratings for high-power multi-mode XLMA-based fiber lasers
Klein, S.; Fitzau, O.; Giesberts, M.; Traub, M.; Hoffmann, H.D.; Krause, V.; Rehmann, G. | Conference Paper |
| 2019 | Investigation of heat accumulation effects during deep hole percussion drilling by high power ultrashort pulsed laser radiation
Haasler, D.; Finger, J. | Journal Article |
| 2019 | Investigation of the ablation rate of stainless steel by means of few ultrashort laser pulses up to 150 J/cm2
Haasler, D.; Schneider, T.; Poprawe, R. | Journal Article |
| 2019 | Investigation on the influence if the overlap factor during the expansion of weld joint area with modulated laser beam welding over gap
Chung, Woo-Sik; Olowinsky, Alexander | Conference Paper |
| 2019 | Investigations on the Interplay Between Focusing and Absorption in Absorber-Free Laser Transmission Welding of Plastics
Mamuschkin, Viktor; Aden, Mirko; Olowinsky, Alexander | Journal Article |
| 2019 | Karosseriebauteile lokal verstärken
Straeten, Kira van der; Kukla, Christian | Journal Article |
| 2019 | Konzept zur Nutzung von Digitalisierung und Vernetzung beim Design, Aufbau und Betrieb optischer Systeme
Prochnau, Marcel Sebastian; König, Georg; Scheres, Sven; Zerbes, Felix; Stollenwerk, Jochen; Loosen, Peter | Journal Article, Conference Paper |
| 2019 | Laboratory-based EUV spectroscopy for the characterization of thin films, membranes and nanostructured surfaces
Bahrenberg, Lukas; Glabisch, Sven; Ghafoori, Moein; Brose, Sascha; Danylyuk, Serhiy; Stollenwerk, Jochen; Loosen, Peter | Conference Paper |
| 2019 | Large-area UV-processing with a novel 248nm line beam system
Delmdahl, Ralph; Trenn, Matthias; Hördemann, Christian; Gillner, Arnold | Conference Paper |
| 2019 | Laser additive manufacturing of biodegradable magnesium alloy WE43
Bär, Florian; Berger, Leopold; Jauer, Lucas; Kurtuldu, Güven; Schäublin, Robin; Schleifenbaum, Johannes Henrich; Löffler, J.F. | Journal Article |
| 2019 | Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance
Gu, Dongdong; Zhang, Hongmei; Dai, Donghua; Xia, Mujian; Hong, Chen; Poprawe, Reinhart | Journal Article |
| 2019 | Laser additive manufacturing of Zn metal parts for biodegradable implants: Effect of gas flow on evaporation and formation quality
Chen, Yanzhe; Wen, Peng; Voshage, Maximilian; Jauer, Lucas; Qin, Yu; Schleifenbaum, Johannes Henrich; Poprawe, R. | Journal Article |
| 2019 | Laser additive manufacturing of Zn porous scaffolds: Shielding gas flow, surface quality and densification
Wen, Peng; Qin, Yu; Voshage, Maximilian; Jauer, Lucas; Poprawe, Reinhart; Schleifenbaum, Johannes Henrich | Journal Article |
| 2019 | Laser Powder Bed Fusion of Advanced High-Strength Steels - Modification of Deformation Mechanisms by Increasing Stacking Fault Energy
Ewald, Simon; Schaukellis, Max; Köhnen, Patrick; Schleifenbaum, Johannes Henrich | Journal Article |
| 2019 | Laser-aided directed energy deposition of metal powder along edges
Pirch, N.; Linnenbrink, S.; Gasser, A.; Schleifenbaum, H. | Journal Article |
| 2019 | Laserdurchstrahlschweißen transparenter Kunststoffe. Tl.2: Schweißen von PC mit 1940 nm Laserstrahlung
Olowinsky, Alexander; Janzen, Ronald; Otto, Gerhard; Mamuschkin, Viktor; Mamuschkin, Viktor; Mamuschkin, Viktor | Journal Article |
| 2019 | Laserdurchstrahlschweißen transparenter Kunststoffe. Tl.3: Technisch-wirtschaftliche Aspekte
Otto, Gerhard; Nguyen, Phong | Journal Article |
| 2019 | Laserstrahlmikrostrukturierung von Magnesiumblechen aus ME20 - Potenziale für die In-Mould-Assembly von Kunststoff/Magnesium-Hybridverbindungen
Engelmann, Christoph; Hopmann, Christian; Wurzbacher, Simon | Journal Article |
| 2019 | Local laser softening of high-strength steel with an adapted intensity
Vogt, Sabrina; Völl, Annika; Wollgarten, Susanne; Freese, Thomas; Stollenwerk, Jochen; Weisheit, Andreas; Loosen, Peter | Journal Article |
| 2019 | Locally Reinforced Auto Body Parts
Straeten, Kira van der; Kukla, Christian | Journal Article |
| 2019 | Microstructural Evolution and Microhardness of Direct Laser Clad TiC Dispersed Titanium Aluminide (Ti45Al5Nb0.5Si) Alloy
Majumdar, Jyotsna Dutta; Rittinghaus, Silja-Katharina; Wissenbach, Konrad; Höche, Daniel; Blawert, Carsten; Weisheit, Andreas | Journal Article, Conference Paper |
| 2019 | Mikroskopisches Stützendesign für die nass-chemische Nachbearbeitung von LPBF-gefertigten Bauteilen aus AlSi10Mg
Schmithüsen, Tobias; Schleifenbaum, Johannes Henrich; Laag, Thomas | Conference Paper |
| 2019 | Misorientation-dependent solute enrichment at interfaces and its contribution to defect formation mechanisms during laser additive manufacturing of superalloys
Hariharan, Avinash; Lu, Lin; Risse, Jeroen; Kostka, Aleksander; Gault, Baptiste; Jägle, Eric Aimé; Raabe, Dierk | Journal Article |
| 2019 | Multi-sensor system for real-time monitoring of laser micro-structuring
Zuric, Milena; Nottrodt, Oliver; Abels, Peter | Conference Paper |
| 2019 | A new laser technology for LISA
Dahl, K.; Cebeci, P.; Fitzau, O.; Giesberts, M.; Greve, C.; Krutzik, M.; Peters, A.; Amairi Pyka, S.; Sanjuan, J.; Schiemangk, M.; Schuldt, T.; Voss, K.; Wicht, A. | Conference Paper |
| 2019 | New sensor and system technology for higher process stability in LMD
Mann, S.; Nottrodt, O. | Conference Paper |
| 2019 | A Novel Diode Pumped Alexandrite Ring Laser for Doppler Lidar
Höffner, Josef; Froh, Jan; Mauer, A.; Lübken, Franz-Josef; Strotkamp, Michael; Munk, Alexander; Jungbluth, Bernd | Conference Paper |
| 2019 | A novel method for the molten pool and porosity formation modelling in selective laser melting
Zheng, M.; Wei, L.; Chen, J.; Zhang, Q.; Zhong, C.; Lin, X.; Huang, W. | Journal Article |
| 2019 | Novel UV line beam system for large area processing with 248 nm
Trenn, Matthias; Delmdahl, Ralph; Sperling, Patrick | Conference Paper |
| 2019 | Numerical simulation in the absorption behavior of Ti6Al4V powder materials to laser energy during SLM
Zhang, D.; Wang, W.; Guo, Y.; Hu, S.; Dong, D.; Ziegler, S.; Schleifenbaum, J.H. | Journal Article |
| 2019 | On-turbine multisensors based on hybrid ceramic manufacturing technology
Ziesche, Steffen; Goldberg, Adrian; Partsch, Uwe; Kappert, Holger; Kind, Heidrun; Aden, Mirko; Naumann, Falk | Conference Paper, Journal Article |
| 2019 | Optisches System mit individueller Strahlmanipulation von bis zu 64 Teilstrahlen für die UKP Multistrahl-Lasermaterialbearbeitung
Hesker, Mario; Stollenwerk, Jochen; Loosen, Peter | Journal Article, Conference Paper |
| 2019 | Oxide dispersion strengthening of γ-TiAl by laser additive manufacturing
Rittinghaus, S.-K.; Wilms, M.B. | Journal Article |
| 2019 | Oxygen gain and aluminum loss during laser metal deposition of intermetallic TiAl
Rittinghaus, Silja-Katharina; Molina Ramirez, Veronica Rocio; Zielinski, Jonas; Hecht, Ulrike | Journal Article |
| 2019 | Petawatt and exawatt class lasers worldwide
Danson, Colin N.; Haefner, Constantin; Bromage, Jake; Butcher, Thomas; Chanteloup, Jean-Christophe F.; Chowdhury, Enam A.; Galvanauskas, Almantas; Limpert, Jens; et. al. | Journal Article |
| 2019 | Porous structure design and fabrication of metal-bonded diamond grinding wheel based on selective laser melting (SLM)
Tian, C.; Li, X.; Zhang, S.; Guo, G.; Ziegler, S.; Schleifenbaum, J.H.; Wang, L.; Rong, Y. | Journal Article |
| 2019 | Precipitation Hardenable High Entropy Alloy for Tooling Applications
Stryzhyboroda, Oleg; Hecht, U.; Witusiewicz, V.T.; Laplanche, G.; Asabre, A.; Wilms, Markus Benjamin; Weisheit, Andreas | Journal Article |
| 2019 | Printability of gas atomized Mo-Si-B powders by laser metal deposition
Schmelzer, J.; Rittinghaus, S.-K.; Weisheit, A.; Stobik, M.; Paulus, J.; Gruber, K.; Wessel, E.; Heinze, C.; Krüger, M. | Journal Article |
| 2019 | Process chain simulation of laser cladding and cold metal forming
Khazan, P.; Kzzo, A.; Hama-Saleh, Rebar; Weisheit, Andreas; Ünsal, I.; Bambach, M. | Conference Paper |
| 2019 | Quantitative Analysis of the Temporal Distance between Melt Waves on the Cutting Front Apex during Laser Fusion Cutting of Stainless-Steel Sheet Metal with 1 Micron Wavelength
Arntz-Schroeder, Dennis; Petring, Dirk; Schneider, Frank; Stoyanov, Stoyan Dimitrov; Halm, Ulrich; Gillner, Arnold | Conference Paper |
| 2019 | Rapid Alloy Development of Extremely High-Alloyed Metals Using Powder Blends in Laser Powder Bed Fusion
Ewald, Simon; Kies, Fabian; Hermsen, Steffen; Voshage, Maximilian; Haase, Christian; Schleifenbaum, Johannes Henrich | Journal Article |
| 2019 | Scalable 30 fs laser source with 530 W average power
Rußbüldt, Peter; Weitenberg, Johannes; Schulte, Jan; Meyer, Rudolph; Meinhardt, Christoph; Hoffmann, Hans-Dieter; Poprawe, Reinhart | Journal Article |
| 2019 | Setting Sights on a 3D Process
Schopphoven, Thomas; Schleifenbaum, Johannes Henrich; Tharmakulasingam, Sadagopan; Schulte, Oliver | Journal Article |
| 2019 | Spectroscopic reflectometry in the extreme ultraviolet for critical dimension metrology
Bahrenberg, Lukas; Danylyuk, Serhiy; Michels, Robert; Glabisch, Sven; Ghafoori, Moein; Brose, Sascha; Stollenwerk, Jochen; Loosen, Peter | Conference Paper |
| 2019 | Spezifische stereotaktische Optionen zur Behandlung seltener Epilepsien, basierend auf hypothalamischen Hamartomen
Reinacher, P.C.; Schulze-Bonhage, A. | Journal Article |
| 2019 | Strongly Out-of-Equilibrium Columnar Solidification During Laser Powder-Bed Fusion in Additive Manufacturing
Boussinot, G.; Apel, M.; Zielinski, J.; Hecht, U.; Schleifenbaum, J.H. | Journal Article |
| 2019 | Study of nickel-based super-alloys Inconel 718 and Inconel 625 in high-deposition-rate laser metal deposition
Zhong, C.; Kittel, J.; Gasser, A.; Schleifenbaum, J.H. | Journal Article |
| 2019 | Surface structuring by laser remelting of 1.2379 (D2) for cold forging tools in automotive applications
Temmler, André; Comiotto, Mirco; Roß, Ingo; Küpper, Moritz; Liu, Dan M.; Poprawe, Reinhart | Journal Article |
| 2019 | Target materials for efficient plasma-based extreme ultraviolet sources in the range of 6 to 8 nm
Wezyk, Alexander von; Andrianov, Konstantin; Wilhein, Thomas; Bergmann, Klaus | Journal Article |
| 2019 | Ultrafast laser structuring within a process chain - Influence of the surface morphology
Brenner, Andreas; Osbild, Martin; Finger, Johannes-Thomas | Conference Paper |
| 2019 | Understanding the process-microstructure correlations for tailoring the mechanical properties of L-PBF produced austenitic advanced high strength steel
Köhnen, Patrick; Létang, Maike; Voshage, Maximilian; Schleifenbaum, Johannes Henrich; Haase, C. | Journal Article |
| 2019 | VCSEL pumped VECSEL concept with compact design
Herper, M.; Lee, A. van der; Kolb, J.; Gronenborn, S.; Moench, H.; Loosen, P. | Journal Article |
| 2019 | Vorrichtung zur Laserbearbeitung schwer zugänglicher Werkstücke
Traub, Martin; Olowinsky, Alexander; Gillner, Arnold; Häusler, Andre | Patent |
| 2019 | Wet-chemical support removal for additive manufactured metal parts
Schmithüsen, Tobias; Schleifenbaum, Johannes Henrich | Conference Paper |
| 2018 | 10 W CEP-stable few-cycle source at 2 µm with 100 kHz repetition rate
Neuhaus, M.; Fuest, H.; Seeger, M.; Schötz, J.; Trubetskov, M.; Russbueldt, P.; Hoffmann, H.D.; Riedle, E.; Major, Zs.; Pervak, V.; Kling, M.F.; Wnuk, P. | Journal Article |
| 2018 | 3D Printing Creates Patient-Specific Implants
Gayer, C. | Journal Article |
| 2018 | 50 years of the Laser Institute of America
Poprawe, R.; Brandt, M.; Quick, N.R.; Solis, B.H.; Lu, Y. | Journal Article |
| 2018 | Actinic tools for EUV resist characterization in research and production
Lebert, R.; Missalla, T.; Phiesel, C.; Piel, C.; Brose, S.; Danylyuk, S.; Loosen, P.; Bergmann, K.; Vieker, J. | Conference Paper |
| 2018 | Additive manufacturing of honeycombs seal strips
Geisen, O.; Kersting, L.; Masseling, L.; Bogner, J.P.; Schleifenbaum, J.H. | Conference Paper |
| 2018 | Additive manufacturing processes in fluid power - properties and opportunities demonstrated at a flow-optimized fitting
Matthiesen, G.; Merget, D.; Rückert, M.; Schmitz, K.; Schleifenbaum, J.H. | Conference Paper |
| 2018 | Ageing response of an Al-Mg-Mn-Sc-Zr alloy processed by laser metal deposition in thin-wall structures
Zhao, T.; Cai, W.; Dahmen, M.; Schaible, J.; Hong, C.; Gasser, Andres; Weisheit, Andreas; Biermann, T.; Kelbassa, I.; Zhang, H.; Gu, D.; Schleifenbaum, J.H. | Journal Article |
| 2018 | Application specific intensity distributions for laser materials processing: Tailoring the induced temperature profile
Völl, A.; Vogt, S.; Wester, R.; Stollenwerk, S.; Loosen, P. | Journal Article |
| 2018 | Automatable support removal and surface smoothing of additive manufactured parts made of AlSi10Mg
Schmithüsen, T.; Bremen, S.; Schleifenbaum, J.H. | Conference Paper |
| 2018 | Automated and model-based assembly of an anamorphic telescope
Holters, M.; Dirks, S.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2018 | Biodegradable Zn metal implants manufactured by laser powder bed fusion
Qin, Yu; Wen, Peng; Chen, Yanzhe; Jauer, Lucas; Voshage, Maximilian; Poprawe, Reinhart; Schleifenbaum, Johannes Henrich | Abstract |
| 2018 | CFRP is demanding - also on laser cutting
Schneider, F.; Petring, D. | Journal Article |
| 2018 | Characterization of additively manufactured metal flexure hinges
Kimm, M.; Schueckler, P.; Schoenen, D.; Corves, B.; Schleifenbaum, J.H. | Conference Paper |
| 2018 | Coaxial beam shaping for laser materials processing
Pütsch, O.; Kelbassa, J.; Stollenwerk, J.; Gasser, A.; Loosen, P. | Journal Article |
| 2018 | Combination of short and ultrashort pulse laser processing for productive large scale structuring of 3D plastic mould steel
Brenner, A.; Kurzidim, F.; Fornaroli, C.; Gillner, A. | Journal Article |
| 2018 | Comparison of laser-based joining approaches for plastic-metal-hybrids - stength vs. process speed
Straeten, K. van der; Engelmann, C.; Olowinsky, A.; Gillner, A. | Conference Paper |
| 2018 | Comparison of material specific rim zone effects of Ti6Al4V machined by wire EDM in water- and CH- based dielectrics
Klocke, F.; Smeets, G.; Kittel, M.; Olivier, M.; Hama-Saleh, R.; Harst, S.; Klink, A. | Journal Article, Conference Paper |
| 2018 | Composite bonding pre-treatment with laser radiation of 3 µm wavelength: Comparison with conventional laser sources
Blass, D.; Nyga, S.; Jungbluth, B.; Hoffmann, H.-D.; Dilger, K. | Journal Article |
| 2018 | Deburring and rounding of sheet metals and functionally relevant edges of parts using laser radiation
Kumstel, J.; Lüken, S. | Conference Paper |
| 2018 | Densification behavior of pure Zn metal parts produced by selective laser melting for manufacturing biodegradable implants
Wen, P.; Jauer, L.; Voshage, M.; Chen, Y.; Poprawe, R.; Schleifenbaum, J.H. | Journal Article |
| 2018 | Density estimation in optical phase space for optimizing micro-optical elements on freeform surfaces
Berens, M.; Völl, A.; Wester, R.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2018 | Depositing laser-generated nanoparticles on powders for additive manufacturing of oxide dispersed strengthened alloy parts via laser metal deposition
Streubel, R.; Wilms, M.B.; Doñate-Buendía, C.; Weisheit, A.; Barcikowski, S.; Schleifenbaum, J.H.; Gökce, B. | Journal Article |
| 2018 | Design framework for model-based self-optimizing manufacturing systems
Thombansen, Ulrich; Buchholz, Guido; Frank, Daniel; Heinisch, Julian; Kemper, Maximilian; Pullen, Thomas; Reimer, Viktor; Rotshteyn, Grigory; Schwenzer, Max; Stemmler, Sebastian; Abel, Dirk; Gries, Thomas; Hopmann, Christian; Klocke, Fritz; Poprawe, Reinhart; Reisgen, Uwe; Schmitt, Robert | Journal Article |
| 2018 | Design of high-manganese steels for additive manufacturing applications with energy-absorption functionality
Kies, F.; Köhnen, P.; Wilms, M.B.; Brasche, F.; Pradeep, K.G.; Schwedt, A.; Richter, S.; Weisheit, A.; Schleifenbaum, J.H.; Haase, C. | Journal Article |
| 2018 | Development of a flexible low laser power hybrid (LLPH) technology for shipbuilding including additive manufactured semi-automated hand-held unit
Cerwenka, G.; Steinmeier, O.; Petronis, E.; Keßler, T.; Fischer, H.W.A.; Fiedler, W.; Schulze, F.; Emmelmann, C. | Journal Article, Conference Paper |
| 2018 | Development of adapted Ni-738 powder for additive manufacturing
Vogelpoth, A.; Sharma, S.; Schleifenbaum, J.H. | Conference Paper |
| 2018 | Development of an adaptive laser beam shaper
König, H.-G.; Pütsch, O.; Lange, F.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2018 | Diamond lenses enable ultra-compact and lightweight laser processing heads
Traub, M.; Holly, C.; Meo, A. di; Arntz, D,; Hesker, M.; Hoffmann, D.; Nebel, C.; Poprawe, R. | Conference Paper |
| 2018 | Digital photonic production along the lines of industry 4.0
Poprawe, R.; Hinke, C.; Meiners, W.; Eibl, F.; Zarei, O.; Voshage, M.; Ziegler, S.; Schleifenbaum, J.H.; Gasser, A.; Schopphoven, T.; Willenborg, E.; Flemmer, J.; Weingarten, C.; Finger, J.; Reininghaus, M. | Conference Paper |
| 2018 | Diode-pumped Alexandrite ring laser in single-longitudinal mode operation for atmospheric lidar measurements
Munk, A.; Jungbluth, B.; Strotkamp, M.; Hoffmann, H.-D.; Poprawe, R.; Höffner, J.; Lübken, F.-J. | Journal Article |
| 2018 | Diode-pumped Q-switched Alexandrite laser in single longitudinal mode operation with Watt-level output power
Munk, A.; Strotkamp, M.; Walochnik, M.; Jungbluth, B.; Traub, M.; Hoffmann, H.-D.; Poprawe, R.; Höffner, J.; Lübken, F.-J. | Journal Article |
| 2018 | Diodenlaser ebnet Weg zu Hybrid-Bauteilen. Reproduzierbares quasisimultanes Laserfügen ersetzt Klebeprozesse
Molitor, T.; Engelmann, C. | Journal Article |
| 2018 | Direct laser cladding of the silicide dispersed titanium aluminide (Ti45Al5Nb0.5Si) composites
Dutta Majumdar, J.; Rittinghaus, S.K.; Wissenbach, K.; Höche, D.; Blawert, C.; Weisheit, A. | Journal Article |
| 2018 | Directly q-switched high power resonator based on XLMA-fibers
Giesberts, M.; Fitzau, O.; Hoffmann, H.-D.; Lange, R.; Bachert, C.; Krause, V. | Conference Paper |
| 2018 | Editorial. Laser applications around the world
Leyens, C.; Poprawe, R. | Journal Article |
| 2018 | Efficient numerical modeling of 3D-printed lattice-cell structures using neural networks
Koeppe, A.; Hernandez Padilla, C.A.; Voshage, M.; Schleifenbaum, J.H.; Markert, B. | Journal Article |
| 2018 | EHLA research team wins renowned Berthold Leibinger Innovationspreis 2018
Nolis, P. | Journal Article |
| 2018 | Electrochemical characterization of laser-carbonized polyacrylonitrile nanofiber nonwovens
Go, D.; Opitz, M.; Lott, P.; Rahimi, K.; Stollenwerk, J.; Thomas, H.; Möller, M.; Roling, B.; Kuehne, A.J.C. | Journal Article |
| 2018 | Erhöhung der Strahldichte von Hochleistungs-Diodenlaserbarren mittels dielektrischer Kantenfilter
Witte, U. | Dissertation |
| 2018 | Feasibility investigation for laser powder bed fusion of high-speed steels
Saewe, J.; Gayer, C.; Jauer, L.; Kunz, J.; Broeckmann, C.; Schleifenbaum, J.H. | Conference Paper |
| 2018 | Fiber laser cutting: The use of carbon-filled acrylic as a qualitative and quantitative analysis tool
Atiyah, H.; Powell, J.; Petring, D.; Stoyanov, S.; Voisey, K.T. | Journal Article |
| 2018 | Fiber-coupled three-micron pulsed laser source for CFRP laser treatment
Nyga, S.; Blass, D.; Katzy, V.; Westphalen, T.; Jungbluth, B.; Hoffmann, H.-D. | Conference Paper |
| 2018 | Fraunhofer-Institut für Lasertechnik. Jahresbericht 2017
| Annual Report |
| 2018 | Free-form optics for non-idealized light sources in 3D: A phase-space approach
Völl, A.; Wester, R.; Buske, P.; Berens, M.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2018 | Fully integrated Q-switch for commercial high-power resonator with solitary XLMA-fiber
Lange, R.; Bachert, C.; Rehmann, G.; Weber, H.; Luxen, R.; Enns, H.; Schenk, M.; Hosdorf, S.; Marfels, S.; Bay, M.; Kösters, A.; Krause, V.; Giesberts, M.; Fitzau, O.; Hoffmann, H.-D. | Conference Paper |
| 2018 | Heat input and accumulation for ultrashort pulse processing with high average power
Finger, J.; Bornschlegel, B.; Reininghaus, M.; Dohrn, A.; Nießen, M.; Gillner, A.; Poprawe, R. | Journal Article |
| 2018 | Heat treatment of laser metal deposited TiAl TNM alloy
Rittinghaus, S.-K.; Hecht, U.; Werner, V.; Weisheit, A. | Journal Article |
| 2018 | Heat-induced molten pool boundary softening behavior and its effect on tensile properties of laser additive manufactured aluminum alloy
Dai, D.; Gu, D.; Zhang, H.; Zhang, J.; Du, Y.; Zhao, T.; Hong, C.; Gasser, A.; Poprawe, R. | Journal Article |
| 2018 | Helical drilling of three-dimensional conical converging-diverging nozzle in steel using ultrashort laser pulses
He, C.; Bühring, J.; Gillner, A. | Journal Article, Conference Paper |
| 2018 | High precision ultrashort pulsed laser drilling of thin metal foils by means of multibeam processing
Barthels, T.; Reininghaus, M. | Conference Paper |
| 2018 | High-efficiency nanostructuring using multi-beam interference by consecutively deposited ultrashort laser pulses on tool steel
He, C.; Steger, M.; Gillner, A. | Journal Article |
| 2018 | Hochproduktive additive Fertigung durch Extremes Hochgeschwindigkeits-Laserauftragschweißen (EHLA) am Beispiel der Strukturierung einer Dressierwalze
Opitz, Tobias; Bremer, Jan; Schopphoven, Thomas; Pawelski, Hartmut; Vogd, Matthias | Study |
| 2018 | Hybrid materials - Joining of polymers and metals
Spancken, Dominik; Laveuve, Dominik M.; Beck, J.; Stötzner, Norbert; Straeten, Kira van der; Büter, Andreas; Henning, Frank | Conference Paper |
| 2018 | Hybrider Werkstoffverbund zwischen einer Metalloberfläche und einer polymeren Materialoberfläche sowie Verfahren zur Herstellung des hybriden Werkstoffverbundes
Engelmann, Christoph; Gillner, Arnold; Olowinsky, Alexander; Straeten, Kira van der | Patent |
| 2018 | An improved scanning strategy for long pulsed laser drilling of carbon fiber textiles
Janssen, S.; Eckstein, M.C. | Journal Article |
| 2018 | In situ visualization of multiple reflections on the cut flank during laser cutting with 1 μm wavelength
Arntz, D.; Petring, D.; Stoyanov, S.; Jansen, U.; Schneider, F.; Poprawe, R. | Journal Article |
| 2018 | Increasing productivity of ultrashort pulsed laser ablation for commercialization of micro structuring
Brenner, Andreas; Bornschlegel, Benedikt; Finger, Johannes-Thomas | Conference Paper |
| 2018 | Increasing system stability with tighter tolerances following the Taguchi Robust Design approach on short-pulsed laser helical drilling of stainless steel
Zibner, F.; Gillner, A. | Conference Paper |
| 2018 | Influence of Climatic Changes on the Joint Strength of Laser Joined Plastic-Metal-Hybrids
Straeten, K. van der; Olowinsky, A.; Gillner, A. | Journal Article |
| 2018 | Influence of powder bed temperature on microstructure and post heat treatment of high speed steel AISI M50 processed by laser-powder bed fusion
Kunz, J.; Herzog, S.; Kaletsch, A.; Broeckmann, C.; Saewe, J.; Gayer, C.; Schleifenbaum, J.H. | Conference Paper |
| 2018 | Influence of scan strategy and molten pool configuration on microstructures and tensile properties of selective laser melting additive manufactured aluminum based parts
Dai, D.; Gu, Dongdong; Zhang, H.; Xiong, J.; Ma, C.; Hong, C.; Poprawe, R. | Journal Article |
| 2018 | Influence of solution heat treatment on microstructure and tensile properties of Inconel 718 formed by high-deposition-rate laser metal deposition
Sui, S.; Zhong, C.; Chen, J.; Gasser, A.; Huang, W.; Schleifenbaum, J.H. | Journal Article |
| 2018 | Influence of the material properties of a poly(D,L-lactide)/β-tricalcium phosphate composite on the processability by selective laser sintering
Gayer, C.; Abert, C.; Bullemer, M.; Grom, S.; Jauer, L.; Meiners, W.; Reinauer, F.; Vučak, M.; Wissenbach, K.; Poprawe, R.; Schleifenbaum, J.H.; Fischer, H. | Journal Article |
| 2018 | Introducing a Holistic Profitability Model for Additive Manufacturing: An Analysis of Laser-powder Bed Fusion
Piller, Frank T.; Poprawe, Reinhart; Schleifenbaum, Johannes Henrich; Schuh, Günther; Barg, Sebastian; Dölle, Christian; Hinke, Christian; Jank, M.-H.; Jiang, R.; Meiners, Wilhelm; Riesener, Michael; Schrage, Johannes; Ziegler, Stephan | Conference Paper |
| 2018 | Investigation of friction conditions in dry metal forming of aluminum by extended conical tube-upsetting tests
Teller, M.; Ross, I.; Temmler, A.; Poprawe, R.; Prünte, S.; Schneider, J.M.; Hirt, G. | Conference Paper |
| 2018 | Investigation to increase the welding joint area with modulated laser beam welding over gap
Chung, W.; Häusler, A.; Olowinsky, A.; Gillner, A.; Poprawe, R. | Journal Article |
| 2018 | Investigations on energy deposition in polycarbonate by picosecond laser pulses for welding applications
Nguyen, P.; Fatherazi, P.; Nippgen, S.; Brosda, M.; Olowinksy, A.; Gillner, A. | Journal Article, Conference Paper |
| 2018 | Large Scale Ultrafast Laser Micro Texturing with Multi-Beams
Bruening, S.; Jarczynski, M.; Du, K.; Gillner, A. | Journal Article |
| 2018 | Laser additive manufacturing of oxide dispersion strengthened steels using laser-generated nanoparticle-metal composite powders
Wilms, M.B.; Streubel, R.; Frömel, F.; Weisheit, A.; Tenkamp, J.; Walther, F.; Barcikowski, S.; Schleifenbaum, J.H.; Gökce, B. | Journal Article, Conference Paper |
| 2018 | Laser additive manufacturing of Zn metal parts for biodegradable applications: Processing, formation quality and mechanical properties
Wen, P.; Voshage, M.; Jauer, L.; Chen, Y.; Qin, Y.; Poprawe, R.; Schleifenbaum, J.H. | Journal Article |
| 2018 | Laser polishing of cold work steel AISI D2 for dry metal forming tools
Ross, I.; Temmler, A.; Küpper, M.; Prünte, S.; Teller, M.; Schneider, J.M.; Poprawe, R. | Conference Paper |
| 2018 | Laser powder bed fusion of stainless steel with high power multi-diode-laser-array
Eibl, F. | Dissertation |
| 2018 | Laser-based plastic-metal-joining with self-organizing microstructures considering different load directions
Straeten, K. van der; Olowinsky, A.; Gillner, A. | Journal Article |
| 2018 | Laserbasierte Formkorrektur von optischen Gläsern
Weingarten, C. | Dissertation |
| 2018 | Laserdurchstrahlschweißen transparenter Kunststoffe. Tl.1: Betrachtung des Energieeintrag
Aden, Mirko; Gillner, Arnold; Otto, Gerhard; Mamuschkin, Viktor | Journal Article |
| 2018 | Lasermikropolieren von Metallen
Nüsser, Christian | Dissertation |
| 2018 | Laserwelding of biopolymers
Brosda, M.; Nguyen, P.; Olowinsky, A.; Gillner, A. | Journal Article, Conference Paper |
| 2018 | LIBS analyses for industrial applications - an overview of developments from 2014 to 2018
Noll, R.; Fricke-Begemann, C.; Connemann, S.; Meinhardt, C.; Sturm, V. | Journal Article |
| 2018 | Local laser softening of press-hardened steel at high feed rates
Vogt, S.; Bechheim, L.; Banik, J.; Flaischerowitz, M.; Weisheit, A.; Schleifenbaum, J.H. | Journal Article |
| 2018 | Machine learning as a comparative tool to determine the relevance of signal features in laser welding
Knaak, C.; Thombansen, U.; Abels, P.; Kröger, M. | Journal Article, Conference Paper |
| 2018 | Measurement methods to build up the digital optical twin
Prochnau, M.; Holzbrink, M.; Wang, W.; Holters, M.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2018 | Mechanical properties and deformation behavior of additively manufactured lattice structures of stainless steel
Köhnen, P.; Haase, C.; Bültmann, J.; Ziegler, S.; Schleifenbaum, J.H.; Bleck, W. | Journal Article |
| 2018 | Mechanical properties of sheet metal components with local reinforcement produced by additive manufacturing
Ünsal, I.; Hama-Saleh, R.; Sviridov, A.; Bambach, M.; Weisheit, A.; Schleifenbaum, J.H. | Conference Paper |
| 2018 | Melt spreading behavior, microstructure evolution and wear resistance of selective laser melting additive manufactured AlN/AlSi10Mg nanocomposite
Dai, D.; Gu, D.; Xia, M.; Ma, C.; Chen, H.; Zhao, T.; Hong, C.; Gasser, A.; Poprawe, R. | Journal Article |
| 2018 | Micro-powder bed fusion (μ-PBF) - Extremely high resolution for small-scale applications
Masseling, L.; Gayer, C. | Conference Paper |
| 2018 | Microstructure of WE43 fabricated by Laser-Powder Bed Fusion in comparison to conventional processing routes
Berger, L.; Bär, F.; Jauer, Lucas; Schäublin, R.; Schleifenbaum, Johannes Henrich; Löffler, J.F. | Abstract |
| 2018 | Microstructures, tensile properties, and fracture mechanisms of Inconel 718 formed by HDR-LMD with PREP and GA powders
Zhong, C.; Chen, J.; Gasser, A.; Sui, S.; Schleifenbaum, J.H. | Journal Article |
| 2018 | Model-based analysis of highly dynamic laser beam shaping using deformable mirrors
Hofmann, O.; Pütsch, O.; Stollenwerk, J.; Loosen, P. | Journal Article, Conference Paper |
| 2018 | Multi-physical analysis of thermo-optical effects for different Selective Laser Melting (SLM) scanning strategies
Bonhoff, T.; Poppe, M.; Stollenwerk, J.; Schleifenbaum, J.H.; Loosen, P. | Journal Article, Conference Paper |
| 2018 | Multi-physical modeling of thermal and dispersive effects in optical systems for high power ultra-short laser pulses
Bonhoff, T.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2018 | Nanospectroscopy of infrared phonon resonance enables local quantification of electronic properties in doped SrTiO3 ceramics
Lewin, M.; Bäumer, C.; Gunkel, F.; Schwedt, A.; Gaussmann, F.; Wueppen, J.; Meuffels, P.; Jungbluth, B.; Mayer, J.; Dittmann, R.; Waser, R.; Taubner, T. | Journal Article |
| 2018 | Next generation urban mining - laser-based sensing and sorting of electronic scrap
Connemann, S.; Ambrosch, R.; Bergmann, K.; Britten, S.; Brumm, H.; Eschen, M.; Fricke-Begemann, C.; Gehlen, C.; Kurylak, W.; Noll, R.; Sellin, G.; Siguier, M.; Tori, A.; Verglia, F. | Conference Paper |
| 2018 | On a model for laser cutting involving surface tension
Vossen, G.; Friedlich, N.A.; Hermanns, T.; Nießen, M.; Schulz, W. | Journal Article, Conference Paper |
| 2018 | On the correlation of the shielding gas flow in L-PBF machines with part density
Schniedenharn, M.; Schleifenbaum, J.H. | Conference Paper |
| 2018 | Optimized vascular network by stereolithography for tissue engineered skin
Han, Xiaoxiao; Courseaus, Julian; Khamassi, Jamel; Nottrodt, Nadine; Engelhardt, Sascha; Jacobsen, Frank; Bierwisch, Claas; Meyer, Wolfdietrich; Walter, Torsten; Weisser, Jürgen; Jaeger, Raimund; Bibb, R.; Harris, Russel | Journal Article |
| 2018 | Optischer Scanner
Bochvarov, Lazar; Lenenbach, Achim; Meineke, Georg; Tulea, Cristian | Patent |
| 2018 | Organic composite metallization using low Pressure cold Spraying
Costil, S.; Aubignat, E.; Langlade, C.; Gillet, V.; Courant, B.; Casari, P.; Knapp, W. | Conference Paper |
| 2018 | Oxide dispersion-strengthened alloys generated by laser metal deposition of laser-generated nanoparticle-metal powder composites
Doñate-Buendía, C.; Frömel, F.; Wilms, M.B.; Streubel, R.; Tenkamp, J.; Hupfeld, T.; Nachev, M.; Gökce, E.; Weisheit, A.; Barcikowski, S.; Walther, F.; Schleifenbaum, J.H.; Gökce, B. | Journal Article |
| 2018 | Polygon scanning system for high-power, high-speed microstructuring
Straeten, K. van der; Nottrodt, O.; Zuric, M.; Olowinksy, A.; Abels, P.; Gillner, A. | Journal Article, Conference Paper |
| 2018 | Porous Nickel Nano‐Foam by Femtosecond Laser Structuring for Supercapacitor Application
Lange, K.; Hördemann, C.; Schulz-Ruhtenberg, M.; Caro, J. | Journal Article |
| 2018 | Position-dependent part quality of the L-PBF process resulting from the laser's angle of incidence
Schniedenharn, M.; Schleifenbaum, J.H. | Conference Paper |
| 2018 | Probing the potential of structured and surface functionalized tools for dry cold forging of aluminium
Teller, M.; Ross, I.; Prünte, S.; Temmler, A.; Küpper, M.; Poprawe, R.; Schneider, J.M.; Hirt, G. | Conference Paper |
| 2018 | Process Chain for Additive Manufacturing of Magnesium Implants
Jauer, Lucas; Kimm, Martin; Labude, N.; Neuß, S.; Lethaus, B.; D'Elia, F.; Müther, M.; Kopp, A.; Ptock, C.; Schleifenbaum, Johannes Henrich | Abstract |
| 2018 | Qualitätsüberwachung von laserstrahlgeschweißten Tapes aus faserverstärkten Kunststoffen mittels Thermografie
Lanfermann, Andrea; Abels, Peter; Gomer, Andreas; Schomburg, Werner Karl | Journal Article |
| 2018 | Quality improvement of the surface of laser micro welds by using a dual beam setup
Haeusler, A.; Hollatz, S.; Olowinsky, A.; Gillner, A.; Poprawe, R. | Journal Article |
| 2018 | Quantitative study of melt flow dynamics inside laser cutting kerfs by in-situ high-speed video-diagnostics
Arntz, D.; Petring, D.; Stoyanov, S.; Quiring, N.; Poprawe, R. | Journal Article, Conference Paper |
| 2018 | Selective laser melting of rare earth element Sc modified aluminum alloy: Thermodynamics of precipitation behavior and its influence on mechanical properties
Zhang, H.; Gu, D.; Yang, J.; Dai, D.; Zhao, T.; Hong, C.; Gasser, A.; Poprawe, R. | Journal Article |
| 2018 | Simulation of the dynamics of heat accumulation during in-volume modification with ultrashort laser pulses
Nippgen, S.; Gillner, A.; Smolenko, A. | Journal Article, Conference Paper |
| 2018 | Solving the Monge-Ampère equation on triangle-meshes for use in optical freeform design
Wester, R.; Völl, A.; Berens, M.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2018 | Structural properties of templated Ge quantum dot arrays
Tempeler, J.; Danylyuk, S.; Brose, S.; Loosen, P.; Juschkin, L. | Journal Article |
| 2018 | Strukturierungsverfahren
Fader, Robert; Lorenz, Jürgen; Rommel, Mathias; Baum, Mario; Danylyuk, Serhiy; Gillner, Arnold; Stollenwerk, Jochen; Bläsi, Benedikt | Book Article |
| 2018 | Tailored irradiation by VCSEL for controlled thermal states in thermoplastic tape placement
Weiler, T.; Striet, P.; Völl, A.; Stollenwerk, J.; Janssen, H.; Emonts, M. | Conference Paper |
| 2018 | Temperature field and residual stress distribution for laser metal deposition
Pirch, N.; Niessen, M.; Linnenbrink, S.; Schopphoven, T.; Gasser, A.; Poprawe, R.; Schöler, C.; Arntz, D.; Schulz, W. | Journal Article |
| 2018 | Ultra-fast laser micro processing by multiple laser spots
Bruening, S.; Du, K.; Jarczynski, M.; Jenke, G.; Gillner, A. | Journal Article, Conference Paper |
| 2018 | Ultrafast dynamics of material excitation of dielectrics with ultrashort pulsed Bessel beams
Kalupka, C.; Holtum, T.; Reininghaus, M. | Conference Paper |
| 2018 | Ultrafast laser helical drilling of three-dimensional shaped holes using synchronized adaption of energy deposition
He, C.; Buehring, J.; Zibner, J.; Gillner, A. | Journal Article |
| 2018 | Ultrashort pulse processing of transparent ceramics: The role of electronic and thermal damage mechanisms
Kalupka C.; Schmalstieg, M.; Reininghaus, M. | Journal Article |
| 2018 | Untersuchung und Vergleich verschiedener berührender und berührungsloser Methoden zur Schwingungsanregung bei der akustischen Resonanzanalyse
Gipperich, Marius; Heinrich, Matthias; Rabe, Ute; Westphalen, Thomas; Nyga, Sebastian | Conference Paper |
| 2018 | UV radiation enhanced oxygen vacancy formation caused by the PLD plasma plume
Hensling, F.V.E.; Keeble, D.J.; Zhu, J.; Brose, S.; Xu, C.; Gunkel, F.; Danylyuk, S.; Nonnenmann, S.S.; Egger, W.; Dittmann, R. | Journal Article |
| 2018 | Verbesserung der Oberflächenqualität von SLM-Bauteilen durch Pulverentfernung im Prozess
Bürger, Laura; Kropp, Ralph; Risse, Jeroen | Patent |
| 2018 | Verfahren und Vorrichtung zur Bearbeitung einer Werkstoffschicht mit energetischer Strahlung
Eibl, Florian; Jauer, Lucas; Meiners, Wilhelm; Poprawe, Reinhart | Patent |
| 2018 | Verfahren und Vorrichtung zur generativen Fertigung von Bauteilen auf einer Grundplatte mit Oberflächentopologie
Eibl, Florian; Meiners, Wilhelm; Pichler, Tobias | Patent |
| 2018 | Verfahren zum Fügen von Bauteilen auf eine Trägerstruktur unter Einsatz von elektromagnetischer Strahlung
Brandenburg, Wolfgang; Faidel, Heinrich; Hoffmann, Hans-Dieter; Janssen, Michael; Loehring, Jens; Plum, Heinz-Dieter; Traub, Martin; Winzen, Matthias | Patent |
| 2018 | Verfahren zur Herstellung von dreidimensionalen Bauteilen mit einem pulverbettbasierten Strahlschmelzverfahren
Eibl, Florian; Meiners, Wilhelm; Pichler, Tobias | Patent |
| 2018 | Verfahren zur Herstellung von dreidimensionalen Bauteilen mit einem pulverbettbasierten Strahlschmelzverfahren
Eibl, Florian; Meiners, Wilhelm; Pichler, Tobias | Patent |
| 2018 | Verfahren zur werkzeuglosen Entfernung von Stützstrukturen bei der generativen Fertigung von Bauteilen
Eibl, Florian; Meiners, Wilhelm; Schmithüsen, Tobias | Patent |
| 2018 | Visualization of the shielding gas flow in SLM machines by space-resolved thermal anemometry
Schniedenharn, M.; Wiedemann, F.; Schleifenbaum, J.H. | Journal Article |
| 2018 | Vorrichtung und Verfahren zur generativen Bauteilfertigung mit mehreren räumlich getrennten Strahlführungen
Eibl, Florian; Jauer, Lucas; Meiners, Wilhelm; Poprawe, Reinhart | Patent |
| 2018 | Vorrichtung und Verfahren zur Herstellung von dreidimensionalen Bauteilen mit einem pulverbettbasierten Strahlschmelzverfahren
Eibl, Florian; Meiners, Wilhelm; Pichler, Tobias | Patent |
| 2018 | Zweistufiges Laserstrahlbeschichten für Funktions- und Verschleißschutzschichten
Maischner, D.; Ross, I.; Weisheit, A.; Deschuyteneer, D.; Petit, F.; Schleifenbaum, J.H. | Journal Article |