| | |
|---|
| 2019 | Accounting for laser beam characteristics in the design of freeform optics for laser material processing
Völl, Annika; Wester, Rolf; Berens, Michael; Buske, Paul; Stollenwerk, Jochen; Loosen, Peter | Journal Article |
| 2019 | Additive manufactured WE43 magnesium: A comparative study of the microstructure and mechanical properties with those of powder extruded and as-cast WE43
Zumdick, N.A.; Jauer, L.; Kersting, L.C.; Kutz, T.N.; Schleifenbaum, J.H.; Zander, D. | Journal Article |
| 2019 | Additive manufacturing of biodegradable metals: Current research status and future perspectives
Qin, Y.; Wen, P.; Guo, H.; Xia, D.; Zheng, Y.; Jauer, L.; Poprawe, R.; Voshage, M.; Schleifenbaum, J.H. | Journal Article |
| 2019 | Additive manufacturing of biodegradable Zn-xWE43 porous scaffolds: Formation quality, microstructure and mechanical properties
Qin, Y.; Wen, P.; Voshage, M.; Chen, Y.; Schückler, P.G.; Jauer, L.; Xia, D.; Guo, H.; Zheng, Y.; Schleifenbaum, J.H. | Journal Article |
| 2019 | Cargo shuttling by electrochemical switching of core-shell microgels obtained by a facile one-shot polymerization
Mergel, Olga; Schneider, Sabine; Tiwari, Rahul; Kühn, Philipp T.; Keskin, Damla; Stuart, Marc C.A.; Schöttner, Sebastian; Kanter, Martinus Jacobus Maria de; Noyong, Michael; Caumanns, Tobias; Mayer, Joachim; Janzen, Christoph; Simon, Ulrich; Gallei, Markus; Wöll, Dominik; Rijn, Patrick van; Plamper, Felix A. | Journal Article |
| 2019 | Cavity-enhanced noncollinear high-harmonic generation
Högner, Maximilian; Saule, Tobias; Heinrich, Stephan; Lilienfein, Nikolai; Esser, Dominik; Trubetskov, Michael; Pervak, Volodymyr; Pupeza, Ioachim | Journal Article |
| 2019 | CNT-reinforced AlSi10Mg composite by selective laser melting: Microstructural and mechanical properties
Liu, Xihe; Zhao, Congcong; Zhou, Xin; Eibl, Florian; Shen, Zhijian; Liu, Wei; Meiners, Wilhelm | Journal Article |
| 2019 | Demonstration of a compact and universal Doppler Lidar based on a novel diode pumped alexandrite ring laser
Höffner, Josef; Strotkamp, Michael; Munk, Alexander; Jungbluth, Bernd | Conference Paper |
| 2019 | Design and fabrication of a fused 7 × 1 35/50 µm into 125/250 µm fiber combiner
Baer, P.; Cebeci, P.; Giesberts, M.; Fitzau, O. | Journal Article |
| 2019 | Development of a solvent-free polylactide/calcium carbonate composite for selective laser sintering of bone tissue engineering scaffolds
Gayer, Christoph; Ritter, Jessica; Bullemer, Martin; Grom, Stephanie; Meiners, Wilhelm; Pfister, Andreas; Reinauer, Frank; Vučak, Marijan; Wissenbach, Konrad; Fischer, Horst; Poprawe, Reinhart; Schleifenbaum, Johannes Henrich; Jauer, Lucas | Journal Article |
| 2019 | Development of low pressure cold sprayed copper coatings on carbon fiber reinforced polymer (CFRP)
Gillet, Vincent; Aubignat, Emilie; Costil, Sophie; Courant, Bruno; Langlade, Cecile; Casari, Pascal; Knapp, Wolfgang; Planche, Marie Pierre | Journal Article |
| 2019 | Diode-pumped Alexandrite laser instrument for next generation satellite-based Earth observation
Strotkamp, Michael; Munk, Alexander; Jungbluth, Bernd; Hoffmann, Hans-Dieter; Höffner, Josef | Conference Paper |
| 2019 | Diode‑pumped Alexandrite laser for next generation satellite‑based earth observation lidar
Strotkamp, Michael; Munk, Alexander; Jungbluth, Bernd; Hoffmann, Hans-Dieter; Höffner, Josef | Journal Article |
| 2019 | Dynamic High-Power Beam-Shaping for 3D Laser Polishing
Hofmann, Oskar; Holters, Martin; Stollenwerk, Jochen; Loosen, Peter | Journal Article, Conference Paper |
| 2019 | Effect of damage incubation in the laser grooving of sapphire
Sakurai, Haruyuki; He, Chao; Konishi, Kuniaki; Tamaru, Hiroharu; Yumoto, Junji; Kuwata-Gonokami, Makoto; Gillner, Arnold | Journal Article |
| 2019 | Equipment and process windows for laser metal deposition with coaxial wire feeding
Kelbassa, Jana; Gasser, Andres; Bremer, Jan; Pütsch, Oliver; Poprawe, Reinhart; Schleifenbaum, Johannes Henrich | Journal Article |
| 2019 | Evaluation of Offline Path Planning for Laser Metal Deposition on Freeform Surfaces
Bold, Marie-Noemi; Pirch, Norbert; Ziegler, Stephan; Schleifenbaum, Johannes Henrich | Conference Paper |
| 2019 | Feasability Investigation for Laser Powder Bed Fusion of High-Speed Steel AISI M50 with Base Preheating System
Saewe, Jasmin; Gayer, Christoph; Vogelpoth, Andreas; Schleifenbaum, Johannes Henrich | Journal Article, Conference Paper |
| 2019 | Formation Quality, Mechanical Properties, and Processing Behavior of Pure Zinc Parts Produced by Laser-Based Manufacturing for Biodegradable Implants
Voshage, Maximilian; Wen, Peng; Schaukellis, Max; Schleifenbaum, Johannes Henrich | Journal Article |
| 2019 | Fraunhofer-Institut für Lasertechnik. Jahresbericht 2018
| Annual Report |
| 2019 | Future AM. Die nächste Generation additiver Fertigungsverfahren
Schleifenbaum, Johannes Henrich; Tenbrock, C.; Emmelmann, Claus; Leyens, Christoph; Brückner, Frank; Michaelis, Alexander | Book Article |
| 2019 | High-Efficiency Sub-Micrometer Multi-Beam Interference Structuring for Large-Scale Surface Using Ultrashort Laser Pulses
He, Chao; Vannahme, Kai; Gillner, Arnold | Journal Article |
| 2019 | High-flux ultrafast extreme-ultraviolet photoemission spectroscopy at 18.4 MHz pulse repetition rate
Saule, T.; Heinrich, S.; Schötz, J.; Lilienfein, N.; Högner, M.; Vries, O. de; Plötner, M.; Weitenberg, J.; Esser, D.; Schulte, J.; Russbueldt, P.; Limpert, J.; Kling, M.F.; Kleineberg, U.; Pupeza, T. | Journal Article |
| 2019 | High-power 2-micron optical-parametric frequency converter with sub-picosecond pulse duration
Elsen, Florian; Jungbluth, Bernd; Nyga, Sebastian; Wueppen, Jochen; Hoffmann, Hans-Dieter | Conference Paper |
| 2019 | High-Power Optical Parametric Generation and Amplification of Femtosecond Pulses at 2 Microns
Elsen, Florian; Jungbluth, Bernd; Nyga, Sebastian; Wueppen, Jochen; Hoffmann, Dieter | Conference Paper |
| 2019 | In situ high speed diagnosis - A quantitative analysis of melt flow dynamics inside cutting kerfs during laser fusion cutting with 1 μm wavelength
Arntz, Dennis; Petring, Dirk; Schneider, Frank; Poprawe, Reinhart | Journal Article |
| 2019 | In-Situ Analysis of Ultrashort Pulsed Laser Ablation with Pulse Bursts
Bornschlegel, Benedikt; Finger, Johannes-Thomas | Journal Article |
| 2019 | Increasing Productivity of Ultrashort Pulsed Laser Ablation in Advance for a Combination Process with ns-laser
Brenner, Andreas; Bornschlegel, Benedikt; Finger, Johannes-Thomas | Journal Article |
| 2019 | Increasing resource efficiency with an engineering decision support system for comparison of product design variants
Buchert, Tom; Ko, Nathanael; Graf, Roberta; Vollmer, Thomas; Alkhayat, Moritz; Brandenburg, Elisabeth; Stark, Rainer; Klocke, Fritz; Leistner, Philip; Schleifenbaum, Johannes Henrich | Journal Article |
| 2019 | Influence of focal length on the laser metal deposition process with coaxial wire feeding
Kelbassa, Jana; Biber, Alexander; Wissenbach, Konrad; Gasser, Andres; Pütsch, Oliver; Loosen, Peter; Schleifenbaum, Johannes Henrich | Conference Paper |
| 2019 | Influence of laser parameters on tensile shear strength of copper welds
Eisenreich, Nathanael; Aeckerle, Michael; Bantel, Christoph; Heider, Andreas; Olowinsky, Alexander | Journal Article |
| 2019 | Influence of laser wavelength and beam profile on the coagulation depth in a soft tissue phantom model
Wehner, M.; Betz, P.; Aden, M. | Journal Article |
| 2019 | The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing
Sui, S.; Tan, H.; Chen, J.; Zhong, C.; Li, Z.; Fan, W.; Gasser, A.; Huang, W. | Journal Article |
| 2019 | Influence of self-organizing microstructures on the wettability of molten plastic on steel for hybrid plastic-metal-joints
Straeten, Kira van der; Sparla, Jochen; Olowinsky, Alexander; Gillner, Arnold | Journal Article |
| 2019 | Influence of spatial power modulation on pore and crack formation in laser beam welding of aluminum
Heinen, Paul; Eichler, Florian; Häusler, André; Olowinsky, Alexander; Aden, Mirko; Gillner, Arnold; Poprawe, Reinhart | Journal Article |
| 2019 | Influence of the surface properties of the connector material on the reliable and reproducible contacting of battery cells with a laser beam welding process
Helm, Johanna; Dietz von Bayer, Ingo; Olowinsky, Alexander; Gillner, Arnold | Journal Article |
| 2019 | Investigations on the Interplay Between Focusing and Absorption in Absorber-Free Laser Transmission Welding of Plastics
Mamuschkin, Viktor; Aden, Mirko; Olowinsky, Alexander | Journal Article |
| 2019 | Karosseriebauteile lokal verstärken
Straeten, Kira van der; Kukla, Christian | Journal Article |
| 2019 | Konzept zur Nutzung von Digitalisierung und Vernetzung beim Design, Aufbau und Betrieb optischer Systeme
Prochnau, Marcel Sebastian; König, Georg; Scheres, Sven; Zerbes, Felix; Stollenwerk, Jochen; Loosen, Peter | Journal Article, Conference Paper |
| 2019 | Large-area UV-processing with a novel 248nm line beam system
Delmdahl, Ralph; Trenn, Matthias; Hördemann, Christian; Gillner, Arnold | Conference Paper |
| 2019 | Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance
Gu, Dongdong; Zhang, Hongmei; Dai, Donghua; Xia, Mujian; Hong, Chen; Poprawe, Reinhart | Journal Article |
| 2019 | Laser additive manufacturing of Zn metal parts for biodegradable implants: Effect of gas flow on evaporation and formation quality
Chen, Yanzhe; Wen, Peng; Voshage, Maximilian; Jauer, Lucas; Qin, Yu; Schleifenbaum, Johannes Henrich; Poprawe, R. | Journal Article |
| 2019 | Laser additive manufacturing of Zn porous scaffolds: Shielding gas flow, surface quality and densification
Wen, Peng; Qin, Yu; Voshage, Maximilian; Jauer, Lucas; Poprawe, Reinhart; Schleifenbaum, Johannes Henrich | Journal Article |
| 2019 | Laser Powder Bed Fusion of Advanced High-Strength Steels - Modification of Deformation Mechanisms by Increasing Stacking Fault Energy
Ewald, Simon; Schaukellis, Max; Köhnen, Patrick; Schleifenbaum, Johannes Henrich | Journal Article |
| 2019 | Laserdurchstrahlschweißen transparenter Kunststoffe. Tl.2: Schweißen von PC mit 1940 nm Laserstrahlung
Olowinsky, Alexander; Janzen, Ronald; Otto, Gerhard; Mamuschkin, Viktor; Mamuschkin, Viktor; Mamuschkin, Viktor | Journal Article |
| 2019 | Local laser softening of high-strength steel with an adapted intensity
Vogt, Sabrina; Völl, Annika; Wollgarten, Susanne; Freese, Thomas; Stollenwerk, Jochen; Weisheit, Andreas; Loosen, Peter | Journal Article |
| 2019 | Locally Reinforced Auto Body Parts
Straeten, Kira van der; Kukla, Christian | Journal Article |
| 2019 | Numerical simulation in the absorption behavior of Ti6Al4V powder materials to laser energy during SLM
Zhang, D.; Wang, W.; Guo, Y.; Hu, S.; Dong, D.; Ziegler, S.; Schleifenbaum, J.H. | Journal Article |
| 2019 | On-turbine multisensors based on hybrid ceramic manufacturing technology
Ziesche, Steffen; Goldberg, Adrian; Partsch, Uwe; Kappert, Holger; Kind, Heidrun; Aden, Mirko; Naumann, Falk | Conference Paper |
| 2019 | Optisches System mit individueller Strahlmanipulation von bis zu 64 Teilstrahlen für die UKP Multistrahl-Lasermaterialbearbeitung
Hesker, Mario; Stollenwerk, Jochen; Loosen, Peter | Journal Article, Conference Paper |
| 2019 | Petawatt and exawatt class lasers worldwide
Danson, Colin N.; Haefner, Constantin; Bromage, Jake; Butcher, Thomas; Chanteloup, Jean-Christophe F.; Chowdhury, Enam A.; Galvanauskas, Almantas; Limpert, Jens; et. al. | Journal Article |
| 2019 | Porous structure design and fabrication of metal-bonded diamond grinding wheel based on selective laser melting (SLM)
Tian, C.; Li, X.; Zhang, S.; Guo, G.; Ziegler, S.; Schleifenbaum, J.H.; Wang, L.; Rong, Y. | Journal Article |
| 2019 | Precipitation Hardenable High Entropy Alloy for Tooling Applications
Stryzhyboroda, Oleg; Hecht, U.; Witusiewicz, V.T.; Laplanche, G.; Asabre, A.; Wilms, Markus Benjamin; Weisheit, Andreas | Journal Article |
| 2019 | Printability of gas atomized Mo-Si-B powders by laser metal deposition
Schmelzer, J.; Rittinghaus, S.-K.; Weisheit, A.; Stobik, M.; Paulus, J.; Gruber, K.; Wessel, E.; Heinze, C.; Krüger, M. | Journal Article |
| 2019 | Process chain simulation of laser cladding and cold metal forming
Khazan, P.; Kzzo, A.; Hama-Saleh, Rebar; Weisheit, Andreas; Ünsal, I.; Bambach, M. | Conference Paper |
| 2019 | Rapid Alloy Development of Extremely High-Alloyed Metals Using Powder Blends in Laser Powder Bed Fusion
Ewald, Simon; Kies, Fabian; Hermsen, Steffen; Voshage, Maximilian; Haase, Christian; Schleifenbaum, Johannes Henrich | Journal Article |
| 2019 | Spectroscopic reflectometry in the extreme ultraviolet for critical dimension metrology
Bahrenberg, Lukas; Danylyuk, Serhiy; Michels, Robert; Glabisch, Sven; Ghafoori, Moein; Brose, Sascha; Stollenwerk, Jochen; Loosen, Peter | Conference Paper |
| 2019 | Strongly Out-of-Equilibrium Columnar Solidification During Laser Powder-Bed Fusion in Additive Manufacturing
Boussinot, G.; Apel, M.; Zielinski, J.; Hecht, U.; Schleifenbaum, J.H. | Journal Article |
| 2019 | Study of nickel-based super-alloys Inconel 718 and Inconel 625 in high-deposition-rate laser metal deposition
Zhong, C.; Kittel, J.; Gasser, A.; Schleifenbaum, J.H. | Journal Article |
| 2019 | Surface structuring by laser remelting of 1.2379 (D2) for cold forging tools in automotive applications
Temmler, André; Comiotto, Mirco; Roß, Ingo; Küpper, Moritz; Liu, Dan M.; Poprawe, Reinhart | Journal Article |
| 2018 | 10 W CEP-stable few-cycle source at 2 µm with 100 kHz repetition rate
Neuhaus, M.; Fuest, H.; Seeger, M.; Schötz, J.; Trubetskov, M.; Russbueldt, P.; Hoffmann, H.D.; Riedle, E.; Major, Zs.; Pervak, V.; Kling, M.F.; Wnuk, P. | Journal Article |
| 2018 | 3D Printing Creates Patient-Specific Implants
Gayer, C. | Journal Article |
| 2018 | Additive manufacturing of honeycombs seal strips
Geisen, O.; Kersting, L.; Masseling, L.; Bogner, J.P.; Schleifenbaum, J.H. | Conference Paper |
| 2018 | Additive manufacturing processes in fluid power - properties and opportunities demonstrated at a flow-optimized fitting
Matthiesen, G.; Merget, D.; Rückert, M.; Schmitz, K.; Schleifenbaum, J.H. | Conference Paper |
| 2018 | Ageing response of an Al-Mg-Mn-Sc-Zr alloy processed by laser metal deposition in thin-wall structures
Zhao, T.; Cai, W.; Dahmen, M.; Schaible, J.; Hong, C.; Gasser, Andres; Weisheit, Andreas; Biermann, T.; Kelbassa, I.; Zhang, H.; Gu, D.; Schleifenbaum, J.H. | Journal Article |
| 2018 | Application specific intensity distributions for laser materials processing: Tailoring the induced temperature profile
Völl, A.; Vogt, S.; Wester, R.; Stollenwerk, S.; Loosen, P. | Journal Article |
| 2018 | Automatable support removal and surface smoothing of additive manufactured parts made of AlSi10Mg
Schmithüsen, T.; Bremen, S.; Schleifenbaum, J.H. | Conference Paper |
| 2018 | Automated and model-based assembly of an anamorphic telescope
Holters, M.; Dirks, S.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2018 | Biodegradable Zn metal implants manufactured by laser powder bed fusion
Qin, Yu; Wen, Peng; Chen, Yanzhe; Jauer, Lucas; Voshage, Maximilian; Poprawe, Reinhart; Schleifenbaum, Johannes Henrich | Abstract |
| 2018 | CFRP is demanding - also on laser cutting
Schneider, F.; Petring, D. | Journal Article |
| 2018 | Characterization of additively manufactured metal flexure hinges
Kimm, M.; Schueckler, P.; Schoenen, D.; Corves, B.; Schleifenbaum, J.H. | Conference Paper |
| 2018 | Coaxial beam shaping for laser materials processing
Pütsch, O.; Kelbassa, J.; Stollenwerk, J.; Gasser, A.; Loosen, P. | Journal Article |
| 2018 | Combination of short and ultrashort pulse laser processing for productive large scale structuring of 3D plastic mould steel
Brenner, A.; Kurzidim, F.; Fornaroli, C.; Gillner, A. | Journal Article |
| 2018 | Comparison of laser-based joining approaches for plastic-metal-hybrids - stength vs. process speed
Straeten, K. van der; Engelmann, C.; Olowinsky, A.; Gillner, A. | Conference Paper |
| 2018 | Comparison of material specific rim zone effects of Ti6Al4V machined by wire EDM in water- and CH- based dielectrics
Klocke, F.; Smeets, G.; Kittel, M.; Olivier, M.; Hama-Saleh, R.; Harst, S.; Klink, A. | Journal Article, Conference Paper |
| 2018 | Composite bonding pre-treatment with laser radiation of 3 µm wavelength: Comparison with conventional laser sources
Blass, D.; Nyga, S.; Jungbluth, B.; Hoffmann, H.-D.; Dilger, K. | Journal Article |
| 2018 | Deburring and rounding of sheet metals and functionally relevant edges of parts using laser radiation
Kumstel, J.; Lüken, S. | Conference Paper |
| 2018 | Densification behavior of pure Zn metal parts produced by selective laser melting for manufacturing biodegradable implants
Wen, P.; Jauer, L.; Voshage, M.; Chen, Y.; Poprawe, R.; Schleifenbaum, J.H. | Journal Article |
| 2018 | Density estimation in optical phase space for optimizing micro-optical elements on freeform surfaces
Berens, M.; Völl, A.; Wester, R.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2018 | Depositing laser-generated nanoparticles on powders for additive manufacturing of oxide dispersed strengthened alloy parts via laser metal deposition
Streubel, R.; Wilms, M.B.; Doñate-Buendía, C.; Weisheit, A.; Barcikowski, S.; Schleifenbaum, J.H.; Gökce, B. | Journal Article |
| 2018 | Design framework for model-based self-optimizing manufacturing systems
Thombansen, Ulrich; Buchholz, Guido; Frank, Daniel; Heinisch, Julian; Kemper, Maximilian; Pullen, Thomas; Reimer, Viktor; Rotshteyn, Grigory; Schwenzer, Max; Stemmler, Sebastian; Abel, Dirk; Gries, Thomas; Hopmann, Christian; Klocke, Fritz; Poprawe, Reinhart; Reisgen, Uwe; Schmitt, Robert | Journal Article |
| 2018 | Design of high-manganese steels for additive manufacturing applications with energy-absorption functionality
Kies, F.; Köhnen, P.; Wilms, M.B.; Brasche, F.; Pradeep, K.G.; Schwedt, A.; Richter, S.; Weisheit, A.; Schleifenbaum, J.H.; Haase, C. | Journal Article |
| 2018 | Development of a flexible low laser power hybrid (LLPH) technology for shipbuilding including additive manufactured semi-automated hand-held unit
Cerwenka, G.; Steinmeier, O.; Petronis, E.; Keßler, T.; Fischer, H.W.A.; Fiedler, W.; Schulze, F.; Emmelmann, C. | Journal Article, Conference Paper |
| 2018 | Development of adapted Ni-738 powder for additive manufacturing
Vogelpoth, A.; Sharma, S.; Schleifenbaum, J.H. | Conference Paper |
| 2018 | Development of an adaptive laser beam shaper
König, H.-G.; Pütsch, O.; Lange, F.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2018 | Diamond lenses enable ultra-compact and lightweight laser processing heads
Traub, M.; Holly, C.; Meo, A. di; Arntz, D,; Hesker, M.; Hoffmann, D.; Nebel, C.; Poprawe, R. | Conference Paper |
| 2018 | Digital photonic production along the lines of industry 4.0
Poprawe, R.; Hinke, C.; Meiners, W.; Eibl, F.; Zarei, O.; Voshage, M.; Ziegler, S.; Schleifenbaum, J.H.; Gasser, A.; Schopphoven, T.; Willenborg, E.; Flemmer, J.; Weingarten, C.; Finger, J.; Reininghaus, M. | Conference Paper |
| 2018 | Diode-pumped Alexandrite ring laser in single-longitudinal mode operation for atmospheric lidar measurements
Munk, A.; Jungbluth, B.; Strotkamp, M.; Hoffmann, H.-D.; Poprawe, R.; Höffner, J.; Lübken, F.-J. | Journal Article |
| 2018 | Diode-pumped Q-switched Alexandrite laser in single longitudinal mode operation with Watt-level output power
Munk, A.; Strotkamp, M.; Walochnik, M.; Jungbluth, B.; Traub, M.; Hoffmann, H.-D.; Poprawe, R.; Höffner, J.; Lübken, F.-J. | Journal Article |
| 2018 | Diodenlaser ebnet Weg zu Hybrid-Bauteilen. Reproduzierbares quasisimultanes Laserfügen ersetzt Klebeprozesse
Molitor, T.; Engelmann, C. | Journal Article |
| 2018 | Direct laser cladding of the silicide dispersed titanium aluminide (Ti45Al5Nb0.5Si) composites
Dutta Majumdar, J.; Rittinghaus, S.K.; Wissenbach, K.; Höche, D.; Blawert, C.; Weisheit, A. | Journal Article |
| 2018 | Directly q-switched high power resonator based on XLMA-fibers
Giesberts, M.; Fitzau, O.; Hoffmann, H.-D.; Lange, R.; Bachert, C.; Krause, V. | Conference Paper |
| 2018 | Editorial. Laser applications around the world
Leyens, C.; Poprawe, R. | Journal Article |
| 2018 | Efficient numerical modeling of 3D-printed lattice-cell structures using neural networks
Koeppe, A.; Hernandez Padilla, C.A.; Voshage, M.; Schleifenbaum, J.H.; Markert, B. | Journal Article |
| 2018 | EHLA research team wins renowned Berthold Leibinger Innovationspreis 2018
Nolis, P. | Journal Article |
| 2018 | Electrochemical characterization of laser-carbonized polyacrylonitrile nanofiber nonwovens
Go, D.; Opitz, M.; Lott, P.; Rahimi, K.; Stollenwerk, J.; Thomas, H.; Möller, M.; Roling, B.; Kuehne, A.J.C. | Journal Article |
| 2018 | Erhöhung der Strahldichte von Hochleistungs-Diodenlaserbarren mittels dielektrischer Kantenfilter
Witte, U. | Dissertation |
| 2018 | Feasibility investigation for laser powder bed fusion of high-speed steels
Saewe, J.; Gayer, C.; Jauer, L.; Kunz, J.; Broeckmann, C.; Schleifenbaum, J.H. | Conference Paper |
| 2018 | Fiber laser cutting: The use of carbon-filled acrylic as a qualitative and quantitative analysis tool
Atiyah, H.; Powell, J.; Petring, D.; Stoyanov, S.; Voisey, K.T. | Journal Article |
| 2018 | Fiber-coupled three-micron pulsed laser source for CFRP laser treatment
Nyga, S.; Blass, D.; Katzy, V.; Westphalen, T.; Jungbluth, B.; Hoffmann, H.-D. | Conference Paper |
| 2018 | Fraunhofer-Institut für Lasertechnik. Jahresbericht 2017
| Annual Report |
| 2018 | Free-form optics for non-idealized light sources in 3D: A phase-space approach
Völl, A.; Wester, R.; Buske, P.; Berens, M.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2018 | Fully integrated Q-switch for commercial high-power resonator with solitary XLMA-fiber
Lange, R.; Bachert, C.; Rehmann, G.; Weber, H.; Luxen, R.; Enns, H.; Schenk, M.; Hosdorf, S.; Marfels, S.; Bay, M.; Kösters, A.; Krause, V.; Giesberts, M.; Fitzau, O.; Hoffmann, H.-D. | Conference Paper |
| 2018 | Heat input and accumulation for ultrashort pulse processing with high average power
Finger, J.; Bornschlegel, B.; Reininghaus, M.; Dohrn, A.; Nießen, M.; Gillner, A.; Poprawe, R. | Journal Article |
| 2018 | Heat treatment of laser metal deposited TiAl TNM alloy
Rittinghaus, S.-K.; Hecht, U.; Werner, V.; Weisheit, A. | Journal Article |
| 2018 | Heat-induced molten pool boundary softening behavior and its effect on tensile properties of laser additive manufactured aluminum alloy
Dai, D.; Gu, D.; Zhang, H.; Zhang, J.; Du, Y.; Zhao, T.; Hong, C.; Gasser, A.; Poprawe, R. | Journal Article |
| 2018 | Helical drilling of three-dimensional conical converging-diverging nozzle in steel using ultrashort laser pulses
He, C.; Bühring, J.; Gillner, A. | Journal Article, Conference Paper |
| 2018 | High-efficiency nanostructuring using multi-beam interference by consecutively deposited ultrashort laser pulses on tool steel
He, C.; Steger, M.; Gillner, A. | Journal Article |
| 2018 | Hochproduktive additive Fertigung durch Extremes Hochgeschwindigkeits-Laserauftragschweißen (EHLA) am Beispiel der Strukturierung einer Dressierwalze
Opitz, Tobias; Bremer, Jan; Schopphoven, Thomas; Pawelski, Hartmut; Vogd, Matthias | Study |
| 2018 | Hybrider Werkstoffverbund zwischen einer Metalloberfläche und einer polymeren Materialoberfläche sowie Verfahren zur Herstellung des hybriden Werkstoffverbundes
Engelmann, Christoph; Gillner, Arnold; Olowinsky, Alexander; Straeten, Kira van der | Patent |
| 2018 | An improved scanning strategy for long pulsed laser drilling of carbon fiber textiles
Janssen, S.; Eckstein, M.C. | Journal Article |
| 2018 | In situ visualization of multiple reflections on the cut flank during laser cutting with 1 μm wavelength
Arntz, D.; Petring, D.; Stoyanov, S.; Jansen, U.; Schneider, F.; Poprawe, R. | Journal Article |
| 2018 | Increasing productivity of ultrashort pulsed laser ablation for commercialization of micro structuring
Brenner, Andreas; Bornschlegel, Benedikt; Finger, Johannes-Thomas | Conference Paper |
| 2018 | Influence of Climatic Changes on the Joint Strength of Laser Joined Plastic-Metal-Hybrids
Straeten, K. van der; Olowinsky, A.; Gillner, A. | Journal Article |
| 2018 | Influence of powder bed temperature on microstructure and post heat treatment of high speed steel AISI M50 processed by laser-powder bed fusion
Kunz, J.; Herzog, S.; Kaletsch, A.; Broeckmann, C.; Saewe, J.; Gayer, C.; Schleifenbaum, J.H. | Conference Paper |
| 2018 | Influence of scan strategy and molten pool configuration on microstructures and tensile properties of selective laser melting additive manufactured aluminum based parts
Dai, D.; Gu, Dongdong; Zhang, H.; Xiong, J.; Ma, C.; Hong, C.; Poprawe, R. | Journal Article |
| 2018 | Influence of solution heat treatment on microstructure and tensile properties of Inconel 718 formed by high-deposition-rate laser metal deposition
Sui, S.; Zhong, C.; Chen, J.; Gasser, A.; Huang, W.; Schleifenbaum, J.H. | Journal Article |
| 2018 | Influence of the material properties of a poly(D,L-lactide)/β-tricalcium phosphate composite on the processability by selective laser sintering
Gayer, C.; Abert, C.; Bullemer, M.; Grom, S.; Jauer, L.; Meiners, W.; Reinauer, F.; Vučak, M.; Wissenbach, K.; Poprawe, R.; Schleifenbaum, J.H.; Fischer, H. | Journal Article |
| 2018 | Introducing a Holistic Profitability Model for Additive Manufacturing: An Analysis of Laser-powder Bed Fusion
Piller, Frank T.; Poprawe, Reinhart; Schleifenbaum, Johannes Henrich; Schuh, Günther; Barg, Sebastian; Dölle, Christian; Hinke, Christian; Jank, M.-H.; Jiang, R.; Meiners, Wilhelm; Riesener, Michael; Schrage, Johannes; Ziegler, Stephan | Conference Paper |
| 2018 | Investigation of friction conditions in dry metal forming of aluminum by extended conical tube-upsetting tests
Teller, M.; Ross, I.; Temmler, A.; Poprawe, R.; Prünte, S.; Schneider, J.M.; Hirt, G. | Conference Paper |
| 2018 | Investigation to increase the welding joint area with modulated laser beam welding over gap
Chung, W.; Häusler, A.; Olowinsky, A.; Gillner, A.; Poprawe, R. | Journal Article |
| 2018 | Investigations on energy deposition in polycarbonate by picosecond laser pulses for welding applications
Nguyen, P.; Fatherazi, P.; Nippgen, S.; Brosda, M.; Olowinksy, A.; Gillner, A. | Journal Article, Conference Paper |
| 2018 | Large Scale Ultrafast Laser Micro Texturing with Multi-Beams
Bruening, S.; Jarczynski, M.; Du, K.; Gillner, A. | Journal Article |
| 2018 | Laser additive manufacturing of oxide dispersion strengthened steels using laser-generated nanoparticle-metal composite powders
Wilms, M.B.; Streubel, R.; Frömel, F.; Weisheit, A.; Tenkamp, J.; Walther, F.; Barcikowski, S.; Schleifenbaum, J.H.; Gökce, B. | Journal Article, Conference Paper |
| 2018 | Laser additive manufacturing of Zn metal parts for biodegradable applications: Processing, formation quality and mechanical properties
Wen, P.; Voshage, M.; Jauer, L.; Chen, Y.; Qin, Y.; Poprawe, R.; Schleifenbaum, J.H. | Journal Article |
| 2018 | Laser polishing of cold work steel AISI D2 for dry metal forming tools
Ross, I.; Temmler, A.; Küpper, M.; Prünte, S.; Teller, M.; Schneider, J.M.; Poprawe, R. | Conference Paper |
| 2018 | Laser powder bed fusion of stainless steel with high power multi-diode-laser-array
Eibl, F. | Dissertation |
| 2018 | Laser-based plastic-metal-joining with self-organizing microstructures considering different load directions
Straeten, K. van der; Olowinsky, A.; Gillner, A. | Journal Article |
| 2018 | Laserbasierte Formkorrektur von optischen Gläsern
Weingarten, C. | Dissertation |
| 2018 | Laserdurchstrahlschweißen transparenter Kunststoffe. Tl.1: Betrachtung des Energieeintrag
Aden, Mirko; Gillner, Arnold; Otto, Gerhard; Mamuschkin, Viktor | Journal Article |
| 2018 | Lasermikropolieren von Metallen
Nüsser, Christian | Dissertation |
| 2018 | Laserwelding of biopolymers
Brosda, M.; Nguyen, P.; Olowinsky, A.; Gillner, A. | Journal Article, Conference Paper |
| 2018 | LIBS analyses for industrial applications - an overview of developments from 2014 to 2018
Noll, R.; Fricke-Begemann, C.; Connemann, S.; Meinhardt, C.; Sturm, V. | Journal Article |
| 2018 | Local laser softening of press-hardened steel at high feed rates
Vogt, S.; Bechheim, L.; Banik, J.; Flaischerowitz, M.; Weisheit, A.; Schleifenbaum, J.H. | Journal Article |
| 2018 | Machine learning as a comparative tool to determine the relevance of signal features in laser welding
Knaak, C.; Thombansen, U.; Abels, P.; Kröger, M. | Journal Article, Conference Paper |
| 2018 | Measurement methods to build up the digital optical twin
Prochnau, M.; Holzbrink, M.; Wang, W.; Holters, M.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2018 | Mechanical properties and deformation behavior of additively manufactured lattice structures of stainless steel
Köhnen, P.; Haase, C.; Bültmann, J.; Ziegler, S.; Schleifenbaum, J.H.; Bleck, W. | Journal Article |
| 2018 | Mechanical properties of sheet metal components with local reinforcement produced by additive manufacturing
Ünsal, I.; Hama-Saleh, R.; Sviridov, A.; Bambach, M.; Weisheit, A.; Schleifenbaum, J.H. | Conference Paper |
| 2018 | Melt spreading behavior, microstructure evolution and wear resistance of selective laser melting additive manufactured AlN/AlSi10Mg nanocomposite
Dai, D.; Gu, D.; Xia, M.; Ma, C.; Chen, H.; Zhao, T.; Hong, C.; Gasser, A.; Poprawe, R. | Journal Article |
| 2018 | Micro-powder bed fusion (μ-PBF) - Extremely high resolution for small-scale applications
Masseling, L.; Gayer, C. | Conference Paper |
| 2018 | Microstructure of WE43 fabricated by Laser-Powder Bed Fusion in comparison to conventional processing routes
Berger, L.; Bär, F.; Jauer, Lucas; Schäublin, R.; Schleifenbaum, Johannes Henrich; Löffler, J.F. | Abstract |
| 2018 | Microstructures, tensile properties, and fracture mechanisms of Inconel 718 formed by HDR-LMD with PREP and GA powders
Zhong, C.; Chen, J.; Gasser, A.; Sui, S.; Schleifenbaum, J.H. | Journal Article |
| 2018 | Model-based analysis of highly dynamic laser beam shaping using deformable mirrors
Hofmann, O.; Pütsch, O.; Stollenwerk, J.; Loosen, P. | Journal Article, Conference Paper |
| 2018 | Multi-physical analysis of thermo-optical effects for different Selective Laser Melting (SLM) scanning strategies
Bonhoff, T.; Poppe, M.; Stollenwerk, J.; Schleifenbaum, J.H.; Loosen, P. | Journal Article, Conference Paper |
| 2018 | Multi-physical modeling of thermal and dispersive effects in optical systems for high power ultra-short laser pulses
Bonhoff, T.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2018 | Nanospectroscopy of infrared phonon resonance enables local quantification of electronic properties in doped SrTiO3 ceramics
Lewin, M.; Bäumer, C.; Gunkel, F.; Schwedt, A.; Gaussmann, F.; Wueppen, J.; Meuffels, P.; Jungbluth, B.; Mayer, J.; Dittmann, R.; Waser, R.; Taubner, T. | Journal Article |
| 2018 | Next generation urban mining - laser-based sensing and sorting of electronic scrap
Connemann, S.; Ambrosch, R.; Bergmann, K.; Britten, S.; Brumm, H.; Eschen, M.; Fricke-Begemann, C.; Gehlen, C.; Kurylak, W.; Noll, R.; Sellin, G.; Siguier, M.; Tori, A.; Verglia, F. | Conference Paper |
| 2018 | On a model for laser cutting involving surface tension
Vossen, G.; Friedlich, N.A.; Hermanns, T.; Nießen, M.; Schulz, W. | Journal Article, Conference Paper |
| 2018 | On the correlation of the shielding gas flow in L-PBF machines with part density
Schniedenharn, M.; Schleifenbaum, J.H. | Conference Paper |
| 2018 | Optimized vascular network by stereolithography for tissue engineered skin
Han, Xiaoxiao; Courseaus, Julian; Khamassi, Jamel; Nottrodt, Nadine; Engelhardt, Sascha; Jacobsen, Frank; Bierwisch, Claas; Meyer, Wolfdietrich; Walter, Torsten; Weisser, Jürgen; Jaeger, Raimund; Bibb, R.; Harris, Russel | Journal Article |
| 2018 | Optischer Scanner
Bochvarov, Lazar; Lenenbach, Achim; Meineke, Georg; Tulea, Cristian | Patent |
| 2018 | Oxide dispersion-strengthened alloys generated by laser metal deposition of laser-generated nanoparticle-metal powder composites
Doñate-Buendía, C.; Frömel, F.; Wilms, M.B.; Streubel, R.; Tenkamp, J.; Hupfeld, T.; Nachev, M.; Gökce, E.; Weisheit, A.; Barcikowski, S.; Walther, F.; Schleifenbaum, J.H.; Gökce, B. | Journal Article |
| 2018 | Polygon scanning system for high-power, high-speed microstructuring
Straeten, K. van der; Nottrodt, O.; Zuric, M.; Olowinksy, A.; Abels, P.; Gillner, A. | Journal Article, Conference Paper |
| 2018 | Porous Nickel Nano‐Foam by Femtosecond Laser Structuring for Supercapacitor Application
Lange, K.; Hördemann, C.; Schulz-Ruhtenberg, M.; Caro, J. | Journal Article |
| 2018 | Position-dependent part quality of the L-PBF process resulting from the laser's angle of incidence
Schniedenharn, M.; Schleifenbaum, J.H. | Conference Paper |
| 2018 | Probing the potential of structured and surface functionalized tools for dry cold forging of aluminium
Teller, M.; Ross, I.; Prünte, S.; Temmler, A.; Küpper, M.; Poprawe, R.; Schneider, J.M.; Hirt, G. | Conference Paper |
| 2018 | Process Chain for Additive Manufacturing of Magnesium Implants
Jauer, Lucas; Kimm, Martin; Labude, N.; Neuß, S.; Lethaus, B.; D'Elia, F.; Müther, M.; Kopp, A.; Ptock, C.; Schleifenbaum, Johannes Henrich | Abstract |
| 2018 | Qualitätsüberwachung von laserstrahlgeschweißten Tapes aus faserverstärkten Kunststoffen mittels Thermografie
Lanfermann, Andrea; Abels, Peter; Gomer, Andreas; Schomburg, Werner Karl | Journal Article |
| 2018 | Quality improvement of the surface of laser micro welds by using a dual beam setup
Haeusler, A.; Hollatz, S.; Olowinsky, A.; Gillner, A.; Poprawe, R. | Journal Article |
| 2018 | Quantitative study of melt flow dynamics inside laser cutting kerfs by in-situ high-speed video-diagnostics
Arntz, D.; Petring, D.; Stoyanov, S.; Quiring, N.; Poprawe, R. | Journal Article, Conference Paper |
| 2018 | Selective laser melting of rare earth element Sc modified aluminum alloy: Thermodynamics of precipitation behavior and its influence on mechanical properties
Zhang, H.; Gu, D.; Yang, J.; Dai, D.; Zhao, T.; Hong, C.; Gasser, A.; Poprawe, R. | Journal Article |
| 2018 | Simulation of the dynamics of heat accumulation during in-volume modification with ultrashort laser pulses
Nippgen, S.; Gillner, A.; Smolenko, A. | Journal Article, Conference Paper |
| 2018 | Solving the Monge-Ampère equation on triangle-meshes for use in optical freeform design
Wester, R.; Völl, A.; Berens, M.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2018 | Strukturierungsverfahren
Fader, Robert; Lorenz, Jürgen; Rommel, Mathias; Baum, Mario; Danylyuk, Serhiy; Gillner, Arnold; Stollenwerk, Jochen; Bläsi, Benedikt | Book Article |
| 2018 | Tailored irradiation by VCSEL for controlled thermal states in thermoplastic tape placement
Weiler, T.; Striet, P.; Völl, A.; Stollenwerk, J.; Janssen, H.; Emonts, M. | Conference Paper |
| 2018 | Temperature field and residual stress distribution for laser metal deposition
Pirch, N.; Niessen, M.; Linnenbrink, S.; Schopphoven, T.; Gasser, A.; Poprawe, R.; Schöler, C.; Arntz, D.; Schulz, W. | Journal Article |
| 2018 | Ultra-fast laser micro processing by multiple laser spots
Bruening, S.; Du, K.; Jarczynski, M.; Jenke, G.; Gillner, A. | Journal Article, Conference Paper |
| 2018 | Ultrafast dynamics of material excitation of dielectrics with ultrashort pulsed Bessel beams
Kalupka, C.; Holtum, T.; Reininghaus, M. | Conference Paper |
| 2018 | Ultrafast laser helical drilling of three-dimensional shaped holes using synchronized adaption of energy deposition
He, C.; Buehring, J.; Zibner, J.; Gillner, A. | Journal Article |
| 2018 | Ultrashort pulse processing of transparent ceramics: The role of electronic and thermal damage mechanisms
Kalupka C.; Schmalstieg, M.; Reininghaus, M. | Journal Article |
| 2018 | Untersuchung und Vergleich verschiedener berührender und berührungsloser Methoden zur Schwingungsanregung bei der akustischen Resonanzanalyse
Gipperich, Marius; Heinrich, Matthias; Rabe, Ute; Westphalen, Thomas; Nyga, Sebastian | Conference Paper |
| 2018 | Verbesserung der Oberflächenqualität von SLM-Bauteilen durch Pulverentfernung im Prozess
Bürger, Laura; Kropp, Ralph; Risse, Jeroen | Patent |
| 2018 | Verfahren und Vorrichtung zur Bearbeitung einer Werkstoffschicht mit energetischer Strahlung
Eibl, Florian; Jauer, Lucas; Meiners, Wilhelm; Poprawe, Reinhart | Patent |
| 2018 | Verfahren und Vorrichtung zur generativen Fertigung von Bauteilen auf einer Grundplatte mit Oberflächentopologie
Eibl, Florian; Meiners, Wilhelm; Pichler, Tobias | Patent |
| 2018 | Verfahren zum Fügen von Bauteilen auf eine Trägerstruktur unter Einsatz von elektromagnetischer Strahlung
Brandenburg, Wolfgang; Faidel, Heinrich; Hoffmann, Hans-Dieter; Janssen, Michael; Loehring, Jens; Plum, Heinz-Dieter; Traub, Martin; Winzen, Matthias | Patent |
| 2018 | Verfahren zur Herstellung von dreidimensionalen Bauteilen mit einem pulverbettbasierten Strahlschmelzverfahren
Eibl, Florian; Meiners, Wilhelm; Pichler, Tobias | Patent |
| 2018 | Verfahren zur werkzeuglosen Entfernung von Stützstrukturen bei der generativen Fertigung von Bauteilen
Eibl, Florian; Meiners, Wilhelm; Schmithüsen, Tobias | Patent |
| 2018 | Visualization of the shielding gas flow in SLM machines by space-resolved thermal anemometry
Schniedenharn, M.; Wiedemann, F.; Schleifenbaum, J.H. | Journal Article |
| 2018 | Vorrichtung und Verfahren zur generativen Bauteilfertigung mit mehreren räumlich getrennten Strahlführungen
Eibl, Florian; Jauer, Lucas; Meiners, Wilhelm; Poprawe, Reinhart | Patent |
| 2018 | Vorrichtung und Verfahren zur Herstellung von dreidimensionalen Bauteilen mit einem pulverbettbasierten Strahlschmelzverfahren
Eibl, Florian; Meiners, Wilhelm; Pichler, Tobias | Patent |
| 2018 | Zweistufiges Laserstrahlbeschichten für Funktions- und Verschleißschutzschichten
Maischner, D.; Ross, I.; Weisheit, A.; Deschuyteneer, D.; Petit, F.; Schleifenbaum, J.H. | Journal Article |
| 2017 | 375-W 37.5-μJ less than 170 fs laser system utilizing nonlinear pulse compression in fused silica
Schulte, J.; Sartorius, T.; Weitenberg, J.; Vernaleken, A.; Russbueldt, P. | Conference Paper |
| 2017 | Additive Fertigung "Vom Pulver zum Fertigteil"
Alkhayat, Moritz; Arntz, Kristian; Klingbeil, Nils; Vollmer, Thomas | Book Article |
| 2017 | Additive manufacturing of magnesium alloys
Jauer, L.; Kimm, M.; Meiners, W.; Santos Batista, R.J.; Labude, N.; Bienert, M.; Neuß, S.; Lethaus, B.; Münther, M.; Kopp, A.; Ptock, C.; Schleifenbaum, J.H. | Abstract |
| 2017 | Advanced data enrichment and data analysis in manufacturing industry by an example of laser drilling process
Wang, Y.; Tercan, H.; Thiele, T.; Meisen, T.; Jeschke, S.; Schulz, W. | Conference Paper |
| 2017 | Advanced trim-cut technique to visualize melt flow dynamics inside laser cutting kerfs
Arntz, D.; Petring, D.; Jansen, U.; Poprawe, R. | Journal Article |
| 2017 | Alternative beam sources and machine concepts for laser powder bed fusion
Eibl, F.; Tenbrock, C.; Pichler, T.; Schmithüsen, T.; Heussen, D.; Schleifenbaum, J.H. | Conference Paper |
| 2017 | Analysis of track formation during laser metal deposition
Pirch, N.; Linnenbrink, S.; Gasser, A.; Wissenbach, K.; Poprawe, R. | Journal Article |
| 2017 | Analytical model for diode-to-fiber coupling and beam propagation in weakly guiding fibers
Neumann, A.; Giesberts, M.; Witte, U.; Fitzau, O.; Hoffmann, H.-D. | Conference Paper |
| 2017 | Anordnung und Verfahren zur verzeichnungsfreien zweidimensionalen Ablenkung von räumlich ausgedehnten Intensitätsverteilungen
Büsing, Lasse; Stollenwerk, Jochen | Patent |
| 2017 | Anordnung und Verfahren zur winkelaufgelösten Streulichtmessung mittels einer Wellenleiter-Sonde
Janzen, Christoph | Patent |
| 2017 | Approach towards the Digital Optical Twin
Prochnau, M.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2017 | Approach towards the digital optical twin
Prochnau, M.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2017 | An automatable algorithm for measurement of fluid flow during laser fusion cutting using in-situ trim cut analysis
Jansen, U.; Arntz, D.; Petring, D.; Schulz, W.; Poprawe, R. | Journal Article |
| 2017 | Basic concepts of laser drilling
Schulz, W.; Eppelt, U. | Book Article |
| 2017 | Bauteilschonende Verbindungstechnik auf Metallisierungen durch moduliertes Laserstrahlschweißen
Britten, S. | Dissertation |
| 2017 | Beam sources for metal additive manufacturing - status quo and requirements
Hinke, C. | Conference Paper |
| 2017 | Boundary layer approximation for melt film dynamics in laser fusion cutting
Jansen, U.; Niessen, M.; Hermanns, T.; Arntz, D.; Poprawe, R.; Schulz, W. | Conference Paper |
| 2017 | Case studies on local reinforcement of sheet metal components by laser additive manufacturing
Bambach, M.; Sviridov, A.; Weisheit, A.; Schleifenbaum, J.H. | Journal Article |
| 2017 | CFRP bonding pre-treatment with laser radiation of 3 μm wavelength: Influence of different treatment parameters
Blass, D.; Nyga, S.; Katzy, V.; Jungbluth, B.; Hoffmann, H.-D.; Dilger, K. | Conference Paper |
| 2017 | Characterisation of quasi-stationary temperature fields in laser welding by infrared thermography
Francis, J.A.; Gach, S.; Olscho, S.; Reisgen, U.; Häusler, A.; Gillner, A.; Poprawe, R. | Journal Article |
| 2017 | Characterization of pellicle membranes by lab-based spectroscopic reflectance and transmittance measurements in the extreme ultraviolet
Bahrenberg, L.; Danylyuk, S.; Brose, S.; Pollentier, I.; Timmermans, M.; Gallagher, E.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2017 | Chemically graded Fe-Al/steel samples fabricated by laser metal deposition
Lotfian, S.; Rolink, G.; Weisheit, A.; Palm, M. | Journal Article |
| 2017 | Coherent beam combining architectures for high power tapered laser arrays
Schimmel, G.; Janicot, S.; Hanna, S.; Decker, J.; Crump, P.; Erbert, G.; Witte, U.; Traub, M.; Georges, P.; Lucas-Leclin, G. | Conference Paper |
| 2017 | Coherent diffractive imaging using table-top sources
Odstrčil, M. | Dissertation |
| 2017 | Combination of laser-based process steps for optics manufacturing
Weingarten, C.; Braun, K.; Willenborg, E. | Conference Paper |
| 2017 | Combinatorial alloy design by laser additive manufacturing
Knoll, H.; Ocylok, S.; Weisheit, A.; Springer, H.; Jägle, E.; Raabe, D. | Journal Article |
| 2017 | Combining thermodynamic modeling and 3D printing of elemental powder blends for high-throughput investigation of high-entropy alloys - towards rapid alloy screening and design
Haase, C.; Tang, F.; Wilms, M.B.; Weisheit, A.; Hallstedt, B. | Journal Article |
| 2017 | Comparison of different methods for robustness estimation of simple lens systems
König, H.-G.; Chen, C.-W.; Holters, M.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2017 | Comparison of maraging steel micro- and nanostructure produced conventionally and by Laser Additive Manufacturing
Jägle, E.A.; Sheng, Z.; Kürnsteiner, P.; Ocylok, S.; Weisheit, A.; Raabe, D. | Journal Article |
| 2017 | Correlation of the high power SLM process with resulting material properties for IN718
Bremen, S.; Meiners, W.; Wissenbach, K.; Poprawe, R. | Journal Article |
| 2017 | Cost efficient diode laser beam source for sheet metal cutting
Witte, U.; Traub, M. | Journal Article |
| 2017 | Demonstration of a 100-mJ OPO/OPA for future lidar applications and laser-induced damage threshold testing of optical components for MERLIN
Elsen, F.; Livrozet, M.; Strotkamp, M.; Wüppen, J.; Jungbluth, B.; Kasemann, R.; Löhring, J.; Meissner, A.; Meyer, R.; Hoffmann, H.-D.; Poprawe, R. | Journal Article |
| 2017 | Demonstration of a 100mJ OPO/OPA for future lidar applications and LIDT testing of optical components for MERLIN
Elsen, F.; Livrozet, M.; Strotkamp, M.; Wüppen, J.; Jungbluth, B.; Kasemann, R.; Löhring, J.; Meissner, A.; Meyer, R.; Hoffmann, D.; Poprawe, R. | Conference Paper |
| 2017 | Design of flexible implants for preservation of physiological mobility exploiting additive manufacturing
Kimm, M.; Jauer, L.; Hinke, C.; Schleifenbaum, J.H.; Poprawe, R. | Conference Paper |
| 2017 | Design of structured YAG:Ce scintillators with enhanced outcoupling for image detection in the extreme ultraviolet
Bahrenberg, L.; Herbert, S.; Mathmann, T.; Danylyuk, S.; Stollenwerk, J.; Loosen, P. | Journal Article |
| 2017 | Direct, mold-less production systems
Poprawe, R.; Bleck, W.; Piller, F.T.; Schuh, G.; Barg, S.; Bohl, A.; Bremen, S.; Bültmann, J.; Hinke, C.; Jiang, R.; Kleer, R.; Merkt, S.; Prahl, U.; Riesener, M.; Schrage, J.; Weller, C.; Ziegler, S. | Book Article |
| 2017 | Disruptive innovation through 3D printing
Poprawe, R.; Hinke, C.; Meiners, W.; Schrage, J.; Bremen, S.; Risse, J.; Merkt, S. | Book Article |
| 2017 | Efficient copper microwelding with fibre lasers using spatial power modulation
Häusler, A.; Mehlmann, B.; Olowinsky, A.; Gillner, A.; Poprawe, R. | Journal Article, Conference Paper |
| 2017 | Efficient manufacturing of large scale structured 3D forming tools through combination of short and ultra-short-pulsed laser processing
Brenner, A.; Fornaroli, C.; Gillner, A. | Conference Paper |
| 2017 | EHLA: Extreme high-speed laser material deposition
Schopphoven, T.; Gasser, A.; Backes, G. | Journal Article |
| 2017 | Elementspezifische Analyse primärverzunderter Stranggussstähle mit Laser-Emissionsspektroskopie
Meinhardt, C. | Dissertation |
| 2017 | Enabling pyrometry in absorber-free laser transmission welding through pulsed irradiation
Mamuschkin, V.; Haeusler, A.; Engelmann, C.; Olowinsky, A.; Aehling, H. | Journal Article |
| 2017 | Enhanced replication ratio of injection molded plastic parts by using an innovative combination of laser-structuring and PVD coating
Bobzin, K.; Hopmann, C.H.; Gillner, A.; Brögelmann, T.; Kruppe, N.C.; Orth, M.; Steger, M.; Naderi, M. | Journal Article |
| 2017 | Enhancement of low pressure cold sprayed copper coating adhesion by laser texturing on aluminum substrates
Knapp, W.; Gillet, V.; Courant, B.; Aubignat, E.; Costil, S.; Langlade, C. | Conference Paper |
| 2017 | Enhancement of the area rate for laser macro polishing
Kumstel, J. | Conference Paper |
| 2017 | Ermittlung der Montagereihenfolge für Präzisionsoptiken
Holters, M.; Stollenwerk, J.; Loosen, P. | Journal Article, Conference Paper |
| 2017 | Evolution of energy deposition during glass cutting with pulsed femtosecond laser radiation
Kalupka, C.; Großmann, D.; Reininghaus, M. | Journal Article |
| 2017 | Experimental and theoretical analysis of thermo-optical effects in protective window for selective laser melting
Bonhoff, T.; Schniedenharn, M.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2017 | Exploiting Process-Related Advantages of Selective Laser Melting for the Production of High-Manganese Steel
Haase, C.; Bültmann, J.; Hof, J.; Ziegler, S.; Bremen, S.; Hinke, C.; Schwedt, A.; Prahl, U.; Bleck, W. | Journal Article |
| 2017 | Fast identification of steel bloom composition at a rolling mill by laser-induced breakdown spectroscopy
Sturm, V.; Meinhardt, C.; Fleige, R.; Fricke-Begemann, C.; Eisbach, J. | Journal Article |
| 2017 | FlowChart tool for decision making in interdisciplinary research cooperation
Jansen, U.; Schulz, W. | Conference Paper |
| 2017 | Fraunhofer-Institut für Lasertechnik. Jahresbericht 2016
| Annual Report |
| 2017 | FULAS: Design and test results of a novel laser platform for future LIDAR missions
Luttmann, J.; Klein, J.; Plum, H.-D.; Hoffmann, H.-D.; Hahn, S.; Bode, M. | Conference Paper |
| 2017 | FULAS: High energy laser source for future lidar applications
Hahn, S.; Bode, M.; Luttmann, J.; Hoffmann, H.-D. | Conference Paper |
| 2017 | Glass cutting
Schulz, W. | Book Article |
| 2017 | Glass processing with pulsed CO2 laser radiation
Weingarten, C.; Uluz, E.; Schmickler, A.; Braun, K.; Willenborg, E.; Temmler, A.; Heidrich, S. | Journal Article |
| 2017 | Glass-ceramic coating material for the CO2 laser based sintering of thin films as caries and erosion protection
Bilandžić, M.D.; Wollgarten, S.; Stollenwerk, J.; Poprawe, R.; Esteves-Oliveira, M.; Fischer, H. | Journal Article |
| 2017 | Growing of bulk sapphire single crystals using laser material deposition
Wilms, M.B.; Biermann, T.; Rolink, G.; Weisheit, A.; Poprawe, R. | Journal Article |
| 2017 | High stability laser for interferometric earth gravity measurements
Dahl, K.; Nicklaus, K.; Herding, M.; Wang, X.; Beller, N.; Fitzau, O.; Giesberts, M.; Herper, M.; Williams, R.A.; Barwood, G.P.; Lovelock, P.; Gill, P.; Koegel, H.; Sell, A. | Conference Paper |
| 2017 | High stability laser for next generation gravity missions
Nicklaus, K.; Herding, M.; Wang, X.; Beller, N.; Fitzau, O.; Giesberts, M.; Herper, M.; Barwood, G.P.; Williams, R.A.; Gill, P.; Koegel, H.; Webster, S.A.; Gohlke, M. | Conference Paper |
| 2017 | High-manganese steel dissimilar joints by laser beam welding - metallurgy and properties
Dahmen, M.; Lindner, S.; Monfort, D.; Petring, D. | Conference Paper |
| 2017 | High-power optical parametric frequency converters with addressable wavelengths in the infrared
Jungbluth, B.; Elsen, F.; Wueppen, J.; Nyga, S.; Strotkamp, M.; Hoffmann, D.; Poprawe, R. | Conference Paper |
| 2017 | High-precision laser microcutting and laser microdrilling using diffractive beam-splitting and high-precision flexible beam alignment
Zibner, F.; Fornaroli, C.; Holtkamp, J.; Shachaf, L.; Kaplan, N.; Gillner, A. | Conference Paper |
| 2017 | High-radiance LDP source for mask inspection and beam line applications (Conference Presentation)
Teramoto, Y.; Santos, B.; Mertens, G.; Kops, R.; Kops, M.; Wezyk, A. von; Bergmann, K.; Yabuta, H.; Nagano, A.; Ashizawa, N.; Taniguchi, Y.; Yamatani, D.; Shirai, T.; Kasama, K. | Conference Paper |
| 2017 | Highly-efficient, frequency-tripled Nd:YAG laser for spaceborne LIDARs
Treichel, R.; Hoffmann, H.-D.; Luttmann, J.; Morasch, V.; Nicklaus, K.; Wührer, C. | Conference Paper |
| 2017 | Hot or cold ablation - that's the question
Nießen, M.; Bürgermeister, L.; Hambach, N. | Journal Article |
| 2017 | Hybrid simulation of laser deep penetration welding
Schöler, C.; Haeusler, A.; Karyofylli, V.; Behr, M.; Schulz, W.; Gillner, A.; Niessen, M. | Journal Article |
| 2017 | In-situ microscopy of front and rear side ablation processes in alkali aluminosilicate glass using ultra short pulsed laser radiation
Großmann, D.; Reininghaus, M.; Kalupka, C.; Jenne, M.; Kumkar, M. | Journal Article |
| 2017 | In-situ-visualization of multiple reflections on the cut flank during laser cutting with 1 micron wavelength
Arntz, D.; Petring, D.; Stoyanov, S.; Jansen, U.; Schneider, F.; Poprawe, R. | Conference Paper |
| 2017 | Industrial laser processing of fibre-reinforced plastics
Engelmann, C.; Schneider, F. | Journal Article |
| 2017 | Influence of additive multilayer feature on thermodynamics, stress and microstructure development during laser 3D printing of aluminum-based material
Dai, D.; Gu, D.; Poprawe, R.; Xia, M. | Journal Article |
| 2017 | Influence of different zinc coatings on laser brazing of galvanized steel
Reimann, W.; Pfriem, S.; Hammer, T.; Päthe, D.; Ungers, M.; Dilger, K. | Journal Article |
| 2017 | The influence of laser-induced-forward transfer on cell viability and growth
Nottrodt, N.; Hildmann, T.; Lensing, R.; Wehner, M. | Abstract |
| 2017 | Influence of process strategy on distortion and residual stresses for the powder based laser metal deposition process
Pirch, N.; Schleifenbaum, H.; Linnenbrink, S.; Gasser, A.; Poprawe, R.; Niessen, M. | Journal Article |
| 2017 | Influence of pulse duration and scanning direction on the deformation of edges during laser micro polishing
Nüsser, Christian; Schneider, Simon | Conference Paper |
| 2017 | Influence of the electrode wear on the EUV generation of a discharge based extreme ultraviolet light source
Vieker, J.; Bergmann, K. | Journal Article |
| 2017 | The influence of the powder stream on high-deposition-rate laser metal deposition with Inconel 718
Zhong, C.; Pirch, N.; Gasser, A.; Poprawe, R.; Schleifenbaum, J.H. | Journal Article |
| 2017 | Integrated optical design for highly dynamic laser beam shaping with membrane deformable mirrors
Pütsch, O.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2017 | Investigation into effects of scanning speed on in vitro biocompatibility of selective laser melted 316L stainless steel parts
Shang, Y.T.; Yuan, Y.P.; Zhang, Y.Z.; Li, D.F.; Li, Y.S. | Conference Paper |
| 2017 | Koaxiale Laserstrahlformung für die Lasermaterial-Bearbeitung mit Zusatzwerkstoff
Pütsch, O.; Kelbassa, J.; Stollenwerk, J.; Gasser, A.; Loosen, P. | Journal Article |
| 2017 | Konzept zur Bearbeitung und tribologischen Prüfung von Fließpressmatrizen für das Trockenumformen von Aluminium
Teller, M.; Hirt, G.; Roß, I.; Temmler, A.; Poprawe, R.; Prünte, S.; Schneider, J.M. | Journal Article |
| 2017 | Korrelation der High Power SLM-Prozessführung mit der Produktivität, Effizienz und den Materialeigenschaften für den Werkstoff Inconel 718
Bremen, S.W. | Dissertation |
| 2017 | Kostenmodell für das Laserstrahlschmelzen: Kosten- und Leistungskennwerte für die additive Fertigung ermitteln und analysieren
Schleifenbaum, J.; Pichler, T.; Hoppe, B. | Journal Article |
| 2017 | kW-class direct diode laser for sheet metal cutting based on commercial pump modules
Witte, U.; Schneider, F.; Holly, C.; Meo, A. di; Rubel, D.; Boergmann, F.; Traub, M.; Hoffmann, D.; Drovs, S.; Brand, T.; Unger, A. | Conference Paper |
| 2017 | Laser additive manufacturing of iron aluminides strengthened by ordering, borides or coherent Heusler phase
Michalcová, A.; Senčekova, L.; Rolink, G.; Weisheit, A.; Pesicka, J.; Stobik, M.; Palm, M. | Journal Article |
| 2017 | Laser Assisted Bioprinting (LAB) without sacrificial metal layer for contamination free assembly of cell cultures
Lensing, R.; Nottrodt, N.; Wehner, M.; Gillner, A. | Abstract |
| 2017 | Laser beam microwelding of lithium-ion battery cells with copper connectors for electrical connections in energy storage devices
Heinen, P.; Haeusler, A.; Mehlmann, B.; Olowinsky, A. | Journal Article |
| 2017 | Laser module based on monolithically integrated Mopas at 1.5 μm for space-borne lidar applications
Faugeron, M.; Klein, S.; Villera, M.; Kochem, G.; Péez-Serrano, A.; Krakowski, M.; Traub, M.; Dijk, F. van; Esquivias, I. | Conference Paper |
| 2017 | Laser polishing and 2PP structuring of inside microfluidic channels in fused silica
Weingarten, C.; Steenhusen, S.; Hermans, M.; Willenborg, E.; Schleifenbaum, J.H. | Journal Article |
| 2017 | Laser polishing and laser shape correction of optical glass
Weingarten, C.; Schmickler, A.; Willenborg, E.; Wissenbach, K.; Poprawe, R. | Journal Article |
| 2017 | Laser sintering moves into the medical market
Gayer, C. | Journal Article |
| 2017 | Laser-based functionalization of electronic multi-material-layers for embedded sensors
Vedder, Christian; Wollgarten, Susanne; Gradmann, Rena; Stollenwerk, Jochen Hugo; Wissenbach, Konrad; Eberstein, Markus | Journal Article |
| 2017 | Laser-based plastic-metal-joining with self-organizing microstructures considering different load directions
Straeten, K. van der; Olowinsky, A.; Gillner, A. | Conference Paper |
| 2017 | Laser-based process for polymeric coatings on temperature-sensitive metallic components
Sändker, H.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2017 | Laser-based process for polymeric tribological coatings on lightweight components
Sändker, H.; Stollenwerk, J.; Loosen, P. | Journal Article |
| 2017 | Laserangeregte Thermografie von CFK-Bauteilen
Mahler, G.; Westphalen, T. | Conference Paper |
| 2017 | Laserbasierte Fertigungstechniken und additive Fertigung
Boehr, S.; Nolis, P.; Brenner, A.; Reininghaus, M.; Lamß, M.; Müller, B. | Journal Article |
| 2017 | Lasertechnik ermöglicht klebstofffreie Hybridverbindungen im Spritzgussprozess
Engelmann, C.; Straeten, K. van der; Heinicke, O. | Journal Article |
| 2017 | Lasertechnik für den Leichtbau - Materialhybride aus Kunststoff und Metall
Spancken, Dominik; Straeten, K. van der; Beck, J.; Hofmann, S.; Büter, Andreas | Conference Paper |
| 2017 | LIA guide to high power laser cutting
Powell, J.; Petring, D.; Pocorni, J.; Kaplan, A. | Book |
| 2017 | Linking energy density with Morphology in laser grooving of sapphire
Sakurai, H.; He, C.; Konishi, K.; Tamaru, H.; Yumoto, J.; Kuwata-Gonokami, M.; Gillner, A. | Conference Paper |
| 2017 | Massive nanoprecipitation in an Fe-19Ni-xAl maraging steel triggered by the intrinsic heat treatment during laser metal deposition
Kürnsteiner, P.; Wilms, M.B.; Weisheit, A.; Barriobero-Vila, P.; Jägle, E.; Raabe, D. | Journal Article |
| 2017 | Meta-modelling and visualisation of multi-dimensional data for virtual production intelligence
Schulz, W. | Book Article |
| 2017 | Meta-modelling, visualization and emulation of multi-dimensional data for virtual production intelligence
Schulz, W.; Hermanns, T.; Al Khawli, T. | Conference Paper |
| 2017 | A method of sintering, crystallizing and/or crosslinking of a coating material on a substrate
Stollenwerk, Jochen; Hawelka, Dominik; Mrcarica, Milca | Patent |
| 2017 | Methodology for assessing laser-based equipment
Pelegrina-Bonilla, G.; Hermsdorf, J.; Thombansen, U.; Abels, P.; Kaierle, S.; Neumann, J. | Journal Article |
| 2017 | Microstructure and degradation of WE43 bone scaffolds fabricated by selective laser melting
Berger, L.; Jauer, Ö.; Bär, F.; Faude, E.; Schäublin, R.; Schleifenbaum, J.H.; Löffler, J.F. | Abstract |
| 2017 | Microstructure and physical performance of laser-induction nanocrystals modified high-entropy alloy composites on titanium alloy
Li, J.; Craeghs, W.; Jing, C.; Gong, S.; Shan, F. | Journal Article |
| 2017 | Microstructure stability of γ-TiAl produced by selective laser melting
Gussone, J.; Garces, G.; Haubrich, J.; Stark, A.; Hagedorn, Y.-C.; Schell, N.; Requena, G. | Journal Article |
| 2017 | Modelling approach towards tailored grain structure in laser processing
Pustal, B.; Vossel, T.; Bührig-Polaczek, A.; Arntz, D.; Haeusler, A.; Gillner, A.; Poprawe, R.; Schwedt, A.; Mayer, J.; Jansen, U.; Schöler, C.; Schulz, W. | Journal Article |
| 2017 | Monitoring soft tissue coagulation by optical spectroscopy
Lihachev, A.; Lihacova, I.; Heinrichs, H.; Spigulis, J.; Trebst, T.; Wehner, M. | Conference Paper |
| 2017 | Multi-pass-cell-based nonlinear pulse compression to 115 fs at 7.5 μJ pulse energy and 300 W average power
Weitenberg, J.; Vernaleken, A.; Schulte, J.; Ozawa, A.; Sartorius, T.; Pervak, V.; Hoffmann, H.-D.; Udem, T.; Russbüldt, P.; Hänsch, T.W. | Journal Article |
| 2017 | Multiphysikalische Analyse von optischen Systemen für die Lasermaterialbearbeitung
Bonhoff, T.; Schniedenharn, M.; Nippgen, S.; Thombansen, U.; Stollenwerk, J.; Loosen, P.; Poprawe, R. | Conference Paper |
| 2017 | New 808 nm high power laser diode pump module for space applications
Schwander, T.; Heine, F.; Lange, R.; Smutny, B.; Erbert, G.; Pittroff, W.; Tränkle, G.; Hoffmann, H.-D.; Plum, H.-D.; Traub, M. | Conference Paper |
| 2017 | A new laser-processing strategy for improving enamel erosion resistance
Esteves-Oliveira, M.; Wollgarten, S.; Liebegall, S.; Jansen, P.; Bilandzic, M.; Meyer-Lueckel, H.; Fischer, H.; Stollenwerk, J.; Poprawe, R. | Journal Article |
| 2017 | New stereolithographic resin providing functional surfaces for biocompatible three-dimensional printing
Hoffmann, A.; Leonards, H.; Tobies, N.; Pongratz, L.; Kreuels, K.; Kreimendahl, F.; Apel, C.; Wehner, M.; Nottrodt, N. | Journal Article |
| 2017 | Next generation urban mining - automated disassembly, separation and recovery of valuable materials from electronic equipment: Overview of R&D approaches and first results of the European project ADIR
Noll, R.; Ambrosch, R.; Bergmann, K.; Britten, S.; Brumm, H.; Chmielarz, A.; Connemann, S.; Eschen, M.; Frank, A.; Fricke-Begemann, C.; Gehlen, C.; Gorewoda, T.; Guolo, M.; Kurylak, W.; Makowe, J.; Sellin, G.; Siguier, M.; Tori, M.; Veglia, F. | Conference Paper |
| 2017 | Nonlinear pulse compression to sub-40 fs at 4.5 μJ pulse energy by multi-pass-cell spectral broadening
Weitenberg, J.; Saule, T.; Schulte, J.; Rußbüldt, P. | Journal Article |
| 2017 | Novel process for butt-joined plastic-metal hybrid compounds
Engelmann, C.; Oster, L.; Olowinsky, A.; Gillner, A.; Mamuschkin, V.; Arntz, D. | Journal Article |
| 2017 | Numerical and experimental study of Ti6Al4V components manufactured using powder bed fusion additive manufacturing
Zielinski, J.; Mindt, H.-W.; Düchting, J.; Schleifenbaum, J.H.; Megahed, M. | Journal Article |
| 2017 | Oberflächenfunktionalisierung des Werkstoffs 1.2379+ mittels Randschichtumschmelzen mit Laserstrahlung zur Entwicklung von angepassten Oberflächentopographien für das schmiermittelfreie Kaltfließpressen von Aluminium
Temmler, A.; Roß, I.; Cortina, M.; Poprawe, R. | Journal Article |
| 2017 | On the interplay of morphology and electronic conductivity of rotationally spun carbon fiber mats
Opitz, M.; Go, D.; Lott, P.; Müller, S.; Stollenwerk, J.; Kuehne, A.; Roling, B. | Journal Article |
| 2017 | Opportunities and challenges of profile extrusion dies produced by additive manufacturing processes
Yesildag, N.; Hopmann, C.; Windeck, C.; Bremen, S.; Wissenbach, K.; Merkt, S. | Conference Paper |
| 2017 | Optimized phase-shifting masks for high-resolution resist patterning by interference lithography
Brose, S.; Danylyuk, S.; Bahrenberg, L.; Lebert, R.; Loosen, P.; Juschkin, L. | Conference Paper |
| 2017 | Polygonscannerbasierte Hochleistungs-Ultrakurzpuls-Laserstrukturierung
Nottrodt, O. | Dissertation |
| 2017 | Post-processing and plasma electrolytic oxidation coating of additive manufactured magnesium scafolds
Müther, M.; Kopp, A.; Ptock, C.; Jauer, L.; Labude, N.; Bienert, M.; Neuß-Stein, S.; Lethaus, B.; Schleifenbaum, J.H. | Abstract |
| 2017 | Programmable diffractive optic for multi-beam processing: Applications and limitations
Gretzki, P.; Gillner, A. | Conference Paper |
| 2017 | Ptychographic imaging with partially coherent plasma EUV sources
Bußmann, J.; Odstrcil, M.; Teramoto, Y.; Juschkin, L. | Journal Article |
| 2017 | Puls-zu-Puls-Wechselwirkungen beim Ultrakurzpuls-Laserabtrag mit hohen Repetitionsraten
Finger, J.-T. | Dissertation |
| 2017 | Quality improvement of copper welds by laser microwelding with the usage of spatial power modulation
Haeusler, A.; Schürmann, A.; Schöler, C.; Olowinsky, A.; Gillner, A.; Poprawe, R. | Journal Article |
| 2017 | A rapid laser probing method facilitates the non-invasive and contact-free determination of leaf thermal properties
Buyel, J.F.; Gruchow, H.M.; Wehner, M. | Journal Article |
| 2017 | Realisierung eines hochauflösenden EUV-Mikroskops mit einer optimierten Gasentladungsquelle zum Betrieb mit Wellenlängen um 17 nm zur Mikroskopie an M-Kanten von Elementen
Freiberger, R. | Dissertation |
| 2017 | Relevance of modeling laser-material interactions in the industrial context
Schulz, W. | Conference Paper |
| 2017 | Residual stress reduction in carbon manganese steels using low-transformation-temperature (LLT) filler materials - in situ diagnostics with digital image correlation
Olschok, S.; Reisgen, U.; Gach, S.; Arntz, D. | Conference Paper |
| 2017 | Scientific cooperation engineering
Jeschke, Sabina; Bleck, Wolfgang; Richert, Anja; Schuh, Günther; Schulz, Wolfgang; Ziefle, Martina; Bräkling, André; Calero Valdez, André; Dahmen, Kirsten; Jansen, Ulrich; Jooß, Claudia; Müller, Sarah L.; Prahl, Ulrich; Schaar, Anne Kathrin; Sharma, Mamta; Thiele, Thomas | Book Article |
| 2017 | Self-optimizing production systems. Front matter
Schlick, C.; Schuh, G.; Klocke, F.; Schmitt, R.; Abel, D.; Brecher, C.; Corves, B.; Gries, T.; Hopmann, C.; Jeschke, S.; Kampker, A.; Loosen, P.; Poprawe, R.; Reisgen, U.; Schulz, W.; Ziefle, M.; Bertelsmeier, F.; Blum, M.; Faber, M.; Gloy, Y.-S.; Keitzel, G.; Mertens, A.; Petruck, H. | Book Article |
| 2017 | Self-optimizing production technologies
Klocke, Fritz; Abel, Dirk; Gries, Thomas; Hopmann, Christian; Loosen, Peter; Poprawe, Reinhart; Reisgen, Uwe; Schmitt, Robert; Schulz, Wolfgang; Abels, Peter; Adams, Oliver; Auerbach, Thomas; Buchholz, Guido; Döbbeler, Benjamin; Frank, Daniel; Heinisch, Julian; Hermanns, Torsten; Gloy, Yves-Simon; Keitzel, Gunnar; Kemper, Maximilian; Martel, Diana Suarez; Reimer, Viktor; Reiter, Matthias; Saggiomo, Marco; Schwenzer, Max; Stemmler, Sebastian; Stoyanov, Stoyan; Thombansen, Ulrich; Veselovac, Drazen; Willms, Konrad | Book Article |
| 2017 | Simulation of laser cutting
Schulz, W.; Nießen, M.; Eppelt, U.; Kowalick, K. | Book Article |
| 2017 | A single-frequency Ho:YLF pulsed laser with frequency stability better than 500 kHz
Kucirek, P.; Meissner, A.; Nyga, S.; Mertin, J.; Höfer, M.; Hoffmann, H.-D. | Conference Paper |
| 2017 | Speckle characterization of surface roughness obtained by laser texturing
Rodríguez, F.; Cotto, I.; Dasilva, S.; Reym, P.; Straeten, K. van der | Journal Article, Conference Paper |
| 2017 | Stiffness management of sheet metal parts using laser metal deposition
Bambach, M.; Sviridov, A.; Weisheit, A. | Conference Paper |
| 2017 | Studies on laser-triggered discharge plasmas as extreme ultraviolet light sources
Beyene, G.A. | Dissertation |
| 2017 | Surface structuring by laser remelting of metals
Temmler, A.; Küpper, M.; Walochnik, M.A.; Lanfermann, A.; Schmickler, T.; Bach, A.; Greifenberg, T.; Oreshkin, O.; Willenborg, E.; Wissenbach, K.; Poprawe, R. | Journal Article |
| 2017 | Surface topography guides morphology and spatial patterning of induced pluripotent stem cell colonies
Abagnale, G.; Sechi, A.; Steger, M.; Zhou, Q.; Kuo, C.-C.; Aydin, G.; Schalla, C.; Müller-Newen, G.; Zenke, M.; Costa, I.G.; Rijn, P. van; Gillner, A.; Wagner, W. | Journal Article |
| 2017 | Synthetic mono-crystalline diamond lenses for high power laser materials processing applications
Traub, Martin; Holly, Carlo; Hoffmann, Dieter; Widmann, Claudia Johanna; Zürbig, Verena; Nebel, Christoph E. | Conference Paper |
| 2017 | Temperature field and residual stress distribution for laser metal deposition
Pirch, N.; Niessen, M.; Linnenbrink, S.; Schopphoven, T.; Gasser, A.; Poprawe, R.; Schöler, C.; Arntz, D.; Schulz, W. | Conference Paper |
| 2017 | Towards crack-free ablation cutting of thin glass sheets with picosecond pulsed lasers
Sun, M.; Eppelt, U.; Hartmann, C.; Schulz, W.; Zhu, J.; Lin, Z. | Conference Paper |
| 2017 | Transversale Moden in optischen Resonatoren für Anwendungen hoher Laserintensität
Weitenberg, J. | Dissertation |
| 2017 | Tribological investigations of the applicability of surface functionalization for dry extrusion processes
Teller, M.; Prünte, S.; Ross, I.; Temmler, A.; Schneider, J.M.; Hirt, G. | Conference Paper |
| 2017 | Two stage Innoslab amplifier for energy scaling from 100 to >500 mJ for future lidar applications
Strotkamp, M.; Elsen, F.; Löhring, J.; Traub, M.; Hoffmann, D. | Journal Article |
| 2017 | Ultrashort pulsed laser ablation for decollation of solid state lithium-ion batteries
Hördemann, C.; Anand, H.; Gillner, A. | Conference Paper |
| 2017 | Ultrashort pulsed laser-dicing of silicon wafers for the decollating of conventional and hybrid solar cells
Hördemann, C.; Fornaroli, C.; Gillner, A. | Conference Paper |
| 2017 | Ultrasmooth metal thin films on curved fused silica by laser polishing
Anemone, G.; Weingarten, C.; Al Taleb, A.; Prieto, C.; Farías, D. | Journal Article |
| 2017 | Uncooled MWIR PbSe technology outperforms CMOS in RT closed-loop control and monitoring of laser processing
Rodriguez-Araujo, J.; Garcia-Diaz, A.; Panadeiro, V.; Knaak, C. | Conference Paper |
| 2017 | Untersuchungen zum automatisierten Entstützen SLM-gefertigter Bauteile
Schmithüsen, T.; Eibl, F.; Meiners, W. | Journal Article |
| 2017 | Untersuchungen zur Stabilität von scannerbasierten Lasterstrahlverfahren - Einfluss der thermischen Belastungen auf die Genauigkeit
Wissinger, A.; Rahn, H.; Olowinsky, A. | Journal Article |
| 2017 | Verfahren und Vorrichtung zur Prozessüberwachung bei der generativen Fertigung von Bauteilen
Thombansen, Ulrich; Mann, Stefan; Abels, Peter | Patent |
| 2017 | Verfahren zum Abtragen von sprädhartem Material
Schulz, Wolfgang; Eppelt, Urs | Patent |
| 2017 | Verfahren zum Abtragen von sprödhartem Material mittels Laserstrahlung
Schulz, Wolfgang; Eppelt, Urs; Jost, Peter | Patent |
| 2017 | Verfahren zum Fügen von zwei Bauteilen im Bereich einer Fügezone mittels mindestens einem Laserstrahl sowie Verfahren zum Erzeugen einer durchgehenden Fügenaht
Britten, Simon; Mehlmann, Benjamin; Olowinsky, Alexander; Gillner, Arnold | Patent |
| 2017 | Verfahren zur Erzeugung von extremer Ultraviolett und/oder weicher Röntgenstrahlung
Bergmann, Klaus; Wezyk, Alexander von | Patent |
| 2017 | Verfahren zur hochauflösenden Abbildung eines Oberflächenbereiches bei streifendem Einfall der Messstrahlung
Bahrenberg, Lukas; Herbert, Stefan; Danylyuk, Serhiy | Patent |
| 2017 | Verfahren zur Überwachung der Qualität einer Schweißnaht
Özmert, Alp | Patent |
| 2017 | Virtual production intelligence (VPI)
Jeschke, S.; Kampker, A.; Kuhlen, T.W.; Schuh, G.; Schulz, W.; Al Khawli, T.; Büscher, C.; Eppelt, U.; Gebhardt, S.; Kreisköther, K.; Pick, S.; Reinhard, R.; Tercan, H.; Utsch, J.; Voet, H. | Book Article |
| 2017 | Virtual production systems
Schulz, W.; Hinke, C. | Book Article |
| 2016 | 1.95 μm-pumped OP-GaAs optical parametric oscillator with 10.6 μm idler wavelength
Wueppen, J.; Nyga, S.; Jungbluth, B.; Hoffmann, D. | Journal Article |
| 2016 | 6Sensitivity analysis of laser cutting based on metamodeling approach
Khawli, T.A.; Eppelt, U.; Schulz, W. | Book Article |
| 2016 | Abschätzung der umformtechnischen Grenzen des schmierstofffreien Kaltfließpressens von Aluminium anhand von Tribometerversuchen
Teller, M.; Hirt, G.; Roß, I.; Temmler, A.; Poprawe, R.; Prünte, S. | Journal Article |
| 2016 | Achromatic Talbot lithography with partially coherent extreme ultraviolet radiation
Brose, S.; Tempeler, J.; Danylyuk, S.; Loosen, P.; Juschkin, L. | Journal Article |
| 2016 | Achromatic Talbot lithography with partially coherent extreme ultraviolet radiation: Process window analysis
Brose, S.; Tempeler, J.; Danylyuk, S.; Loosen, P.; Juschkin, L. | Journal Article |
| 2016 | Adaption of functional ceramic materials for the laser sintering process in integrated sensor applications
Gradmann, Rena; Seuthe, Thomas; Vedder, Christian; Eberstein, Markus; Partsch, Uwe | Journal Article, Conference Paper |
| 2016 | Adaptive optical beam shaping for compensating projection-induced focus deformation
Pütsch, O.; Stollenwerk, J.; Loosen, P. | Journal Article |
| 2016 | Aktive und adaptive Strahlformungssysteme für die Werkstoffbearbeitung mit Laserstrahlung
Pütsch, O. | Dissertation |
| 2016 | Alloyed ultra-high strength steels
Dahmen, M.; Gerhards, B.; Lindner, S. | Journal Article, Conference Paper |
| 2016 | Analysis and evaluation of boundary conditions for direct surface structuring by multi-beam interference
Steger, M.; Gillner, A. | Journal Article |
| 2016 | Approach for self-optimising assembly of optical systems
Holters, M.; Gatej, A.; Haag, S.; Müller, T.; Loosen, P.; Brecher, C. | Journal Article |
| 2016 | Artificial vascularized scaffolds for 3D-tissue regene-ration - a report of the ArtiVasc 3D Project
Bibb, R.; Nottrodt, N.; Gillner, A. | Journal Article |
| 2016 | Aufbauratensteigerung mittels High-Power Selective Laser Melting für den Werkstoff Ti6Al4V
Schniedenharn, M.; Liu, Q. | Conference Paper |
| 2016 | Bearbeitungskopf für die Materialbearbeitung
Abels, Peter; Ungers, Michael; Thombansen, Ulrich; Meyer, Daniel; Franz, Christoph | Patent |
| 2016 | Breitband-Nahfeldmikroskopie an phonon-resonanten Kristallen
Bensmann, S. | Dissertation |
| 2016 | Cavity-enhanced high-harmonic generation at 250 MHz
Carstens, H.; Högner, M.; Saule, T.; Holzberger, S.; Lilienfein, N.; Guggenmos, A.; Jocher, C.; Eidam, T.; Esser, D.; Tosa, V.; Pervak, V.; Limpert, J.; Tünnermann, A.; Kleineberg, U.; Krausz, F.; Pupeza, I. | Conference Paper |
| 2016 | CFRP bonding pre-treatment with laser radiation of 3 μm wavelength: Laser/material interaction
Blass, D.; Kreling, S.; Nyga, S.; Westphalen, T.; Jungbluth, B.; Hoffman, H.-D.; Dilger, K. | Conference Paper |
| 2016 | Coherent Diffractive Imaging with a Laboratory-Scale, Gas-Discharge Plasma Extreme Ultraviolet Light Source
Bußmann, J.; Odstrcil, M.; Bresenitz, R.; Rudolf, D.; Miao, J.; Brocklesby, W.S.; Juschkin, L. | Conference Paper |
| 2016 | Compact 35μm fiber coupled diode laser module based on dense wavelength division multiplexing of NBA mini-bars
Witte, U.; Traub, M.; Meo, A. di; Rubel, D.; Hamann, M.; Hengesbach, S.; Hoffmann, D. | Conference Paper |
| 2016 | Compact extreme ultaviolet source for laboratory-based photoemission spectromicroscopy
Wilson, D.; Schmitz, C.; Rudolf, D.; Wiemann, C.; Plucinski, L.; Riess, S.; Schuck, M.; Hardtdegen, H.; Schneider, C.M.; Tautz, F.S.; Juschkin, L. | Book Article |
| 2016 | Compact extreme ultraviolet source for laboratory-based photoemission spectromicroscopy
Schmitz, C.; Wilson, D.; Rudolf, D.; Wiemann, C.; Plucinski, L.; Riess, S.; Schuck, M.; Hardtdegen, H.; Schneider, C.M.; Tautz, F.S.; Juschkin, L. | Journal Article |
| 2016 | A comparative study of Inconel 718 formed by High Deposition Rate Laser Metal Deposition with GA powder and PREP powder
Zhong, C.; Chen, J.; Linnenbrink, S.; Gasser, A.; Sui, S.; Poprawe, R. | Journal Article |
| 2016 | Comparison and assessment of conventional process chains and laser additive manufacturing based process chains
Klocke, F.; Poprawe, R.; Schmitt, R.H.; Gasser, A.; Arntz, K.; Große Böckmann, M.; Klingbeil, N.; Kerkhoff, J.; Vollmer, T.; Wegener, M.; Alkhayat, M. | Conference Paper |
| 2016 | Computing specific intensity distributions for laser material processing by solving an inverse heat conduction problem
Völl, A.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2016 | Damage morphology and mechanism in ablation cutting of thin glass sheets with picosecond pulsed lasers
Sun, M.Y.; Eppelt, U.; Hartmann, C.; Schulz, W.; Zhu, J.Q.; Lin, Z.Q. | Journal Article |
| 2016 | Demonstration of a 500 mJ InnoSlab-amplifier for future lidar applications
Löhring, J.; Strotkamp, M.; Elsen, F.; Kasemann, R.; Klein, J.; Traub, M.; Kochem, G.; Meissner, A.; Höfer, M.; Hoffmann, D. | Conference Paper |
| 2016 | Deposition and characterization of B4C/CeO2 multilayers at 6.x nm extreme ultraviolet wavelengths
Sertsu, M.G.; Giglia, A.; Brose, S.; Park, D.; Wang, Z.S.; Mayer, J.; Juschkin, L.; Nicolosi, P. | Journal Article |
| 2016 | Determination of process variables in melt-based manufacturing processes
Thombansen, U.; Purrio, M.; Buchholz, G.; Hermanns, T.; Molitor, T.; Willms, K.; Schulz, W.; Reisgen, U. | Journal Article |
| 2016 | Determination of the thermal properties of leaves by non-invasive contact-free laser probing
Buyel, J.F.; Gruchow, H.M.; Tödter, N.; Wehner, M. | Journal Article |
| 2016 | Development of a new production method for manufacturing of hybrid parts from metal and plastics
Bobzin, K.; Öte, M.; Linke, T.F.; Liao, X.; Hopmann, C.; Ochotta, P.; Steger, M.; Gillner, A. | Abstract |
| 2016 | Digital photonic production of corundum components by SLE
Hörstmann-Jungemann, M.C. | Dissertation |
| 2016 | Diode-pumped Alexandrite ring laser for LIDAR applications
Munk, A.; Jungbluth, B.; Strotkamp, M.; Hoffmann, H.-D.; Poprawe, R.; Höffner, J. | Conference Paper |
| 2016 | Disseminating results of RFCS supported research projects on EAF technology
Kleimt, B.; Köchner, H.; Donato, A. di; Santis, M. de; Fricke-Begemann, C.; Echterhof, T.; Gandt, K.; Sandberg, E.; Heintz, I.; Björkvall, J.; Pierret, J.-C. | Journal Article |
| 2016 | E³-Produktion. Ultrakurze Prozessketten bewerten und verbessern
Klocke, Fritz; Vollmer, Thomas; Klingbeil, Nils; Wegener, Maximilian; Alkhayat, Moritz; Lahl, Mike; Kluth, Andreas | Journal Article |
| 2016 | Effect of various dispersing agents on the stability of silver microparticle dispersion and the formulation of uniform silver film by laser melting
Letzel, A.; Maurer, E.; Meixner, M.; Poprawe, R.; Stollenwerk, J.; Hessner, S.; Lehmann, K.; Gökce, B.; Barcikowski, S. | Journal Article |
| 2016 | Efficient additive manufacturing production of oxide- and nitride-dispersion-strengthened materials through atmospheric reactions in liquid metal deposition
Springer, H.; Baron, C.; Szczepaniak, A.; Jägle, E.A.; Wilms, M.B.; Weisheit, A.; Raabe, D. | Journal Article |
| 2016 | Enabling laboratory EUV research with a compact exposure tool
Brose, S.; Danylyuk, S.; Tempeler, J.; Kim, Hyun-su; Loosen, P.; Juschkin, L. | Conference Paper |
| 2016 | Enabling the measurement of particle sizes in stirred colloidal suspensions by embedding dynamic light scattering into an automated probe head
Kanter, M. de; Meyer-Kirschner, J.; Viell, J.; Mitsos, A.; Kather, M.; Pich, A.; Janzen, C. | Journal Article |
| 2016 | Entwicklung der laserbasierten additiven Fertigung für intermetallische Fe-Al-Legierungen
Rolink, G. | Dissertation |
| 2016 | Erratum. Wide-field broadband extreme ultraviolet transmission ptychography using a high-harmonic source: Publisher’s note
Baksh, P.D.; Odstrcil, M.; Kim, H.-S.; Boden, S.A.; Frey, J.G.; Brocklesby, W.S. | Journal Article |
| 2016 | Experimental and simulative investigations of laser assisted plastic-metal-joints considering different load directions
Engelmann, C.; Eckstaedt, J.; Olowinsky, A.; Aden, M.; Mamuschkin, V. | Journal Article, Conference Paper |
| 2016 | A fast method for automated calibration of heat sources
Schöler, C.; Nießen, M.; Jansen, U.; Schulz, W. | Conference Paper |
| 2016 | Flächendetektor für EUV- und/oder weiche Röntgenstrahlung
Herbert, Stefan; Juschkin, Larissa; Danylyuk, Serhiy; Müller, Bernhard | Patent |
| 2016 | Formation mechanism and microstructural and mechanical properties of in-situ Ti-Ni-based composite coatings by laser metal deposition
Ma, C.; Gu, D.; Hong, C.; He, B.; Chang, K.; Shi, Q. | Journal Article |
| 2016 | Fraunhofer-Institut für Lasertechnik. Jahresbericht 2015
| Annual Report |
| 2016 | Freeform lens collimating spectrum-folded Hadamard transform near-infrared spectrometer
Wang, X.; Liu, H.; Juschkin, L.; Li, Y.; Xu, Y.; Quan, X.; Lu, Z. | Journal Article |
| 2016 | FULAS: High energy laser source for future LIDAR applications
Hahn, S.; Bode, M.; Luttmann, J.; Hoffmann, H.-D. | Conference Paper |
| 2016 | Herstellung und Eigenschaften nanopartikulär verstärkter Beschichtungen durch Laserauftragschweißen zum Verschleißschutz von Schmiedegesenken
Ocylok, S. | Dissertation |
| 2016 | High density perforation of thin Al-foils with ultra short pulse lasers in dependence on the repetition rate
Hambach, N.; Hartmann, C.; Keller, S.; Gillner, A. | Journal Article |
| 2016 | High power parallel ultrashort pulse laser processing
Gillner, A.; Gretzki, P.; Büsing, L. | Conference Paper |
| 2016 | High precision and high aspect ratio laser drilling: Challenges and solutions
Uchtmann, H.; He, C.; Gillner, A. | Conference Paper |
| 2016 | High resolution, wide field of view, ptychographic imaging of a biological sample using a high harmonic generation source
Baksh, P.; Odstrcil, M.; Kim, H.; Boden, S.; Card, R.; Bailey, J.; Deinhardt, K.; Chad, J.; Brocklesby, W.S.; Frey, J.G. | Conference Paper |
| 2016 | High speed photography of laser induced forward transfer (LIFT) of single and double-layered transfer layers for single cell transfer
Riester, D.; Budde, J.; Gach, C.; Gillner, A.; Wehner, M. | Journal Article |
| 2016 | High-average power ultrafast Yb: Innoslab amplifier
Russbueldt, P.; Mans, T.; Hoffmann, D.; Schippel, S. | Book Article |
| 2016 | High-harmonic generation at 250 MHz with photon energies exceeding 100 eV
Carstens, H.; Högner, M.; Saule, T.; Holzberger, S.; Lilienfein, N.; Guggenmos, A.; Jocher, C.; Eidam, T.; Esser, D.; Tosa, V.; Pervak, V.; Limpert, J.; Tünnermann, A.; Kleineberg, U.; Krausz, F.; Pupeza, I. | Journal Article |
| 2016 | High-power operation of coherently coupled tapered laser diodes in an external cavity
Schimmel, G.; Doyen, I.; Janicot, S.; Hanna, M.; Georges, P.; Lucas-Leclin, G.; Decker, J.; Crump, P.; Erbert, G.; Kaunga-Nyirenda, S.; Moss, D.; Bull, S.; Larkins, E.C.; Witte, U.; Traub, M. | Conference Paper |
| 2016 | High-radiance LDP source: Clean, reliable, and stable EUV source for mask inspection
Teramoto, Y.; Santos, B.; Mertens, G.; Kops, R.; Kops, M.; Wezyk, A. von; Bergmann, K.; Yabuta, H.; Nagano, A.; Ashizawa, N.; Taniguchi, Y.; Shirai, T.; Nakamura, K.; Aoki, K.; Kasama, K. | Conference Paper |
| 2016 | An improved approach for process monitoring in laser material processing
König, H.-G.; Pütsch, O.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2016 | Improvement of energy deposition in absorber-free laser welding through quasi-simultaneous irradiation
Mamuschkin, V.; Engelmann, C.; Olowinsky, A. | Journal Article, Conference Paper |
| 2016 | Improvement of material performance of Inconel 718 formed by high deposition-rate laser metal deposition
Zhong, C.; Gasser, A.; Kittel, J.; Wissenbach, K.; Poprawe, R. | Journal Article |
| 2016 | Influence of the laser-beam distribution on the seam dimensions for laser-transmission welding
Aden, M. | Journal Article |
| 2016 | An integrated approach for the knowledge discovery in computer simulation models with a multi-dimensional parameter space
Khawli, T.A.; Gebhardt, S.; Eppelt, U.; Hermanns, T.; Kuhlen, T.; Schulz, W. | Conference Paper |
| 2016 | Investigation and assessment of a laser additive manufacturing based process chain by the example of an injection mold
Klocke, F.; Poprawe, R.; Schmitt, R.; Gasser, A.; Arntz, K.; Große Böckmann, M.; Klingbeil, N.; Kerkhoff, J.; Vollmer, T.; Wegener, M.; Alkhayat, M. | Conference Paper |
| 2016 | Investigations on the emission in the extreme ultraviolet of a pseudospark based discharge light source
Bergmann, K.; Vieker, J.; Wezyk, A. von | Journal Article |
| 2016 | Investigations on ultra-high-speed laser material deposition as alternative for hard chrome plating and thermal spraying
Schopphoven, T.; Gasser, A.; Wissenbach, K.; Poprawe, R. | Journal Article, Conference Paper |
| 2016 | Key optical components for spaceborne lasers
Löhring, J.; Winzen, M.; Faidel, H.; Miesner, J.; Plum, D.; Klein, J.; Fitzau, O.; Giesberts, M.; Brandenburg, W.; Seidel, A.; Schwanen, N.; Riesters, D.; Hengesbach, S.; Hoffmann, H.-D. | Conference Paper |
| 2016 | KW-class direct diode laser for sheet metal cutting based on DWDM of pump modules by use of ultra-steep dielectric filters
Witte, U.; Schneider, F.; Traub, M.; Hoffmann, D.; Drovs, S.; Brand, T.; Unger, A. | Journal Article |
| 2016 | Laser beam cutting - A mature and still advancing laser application becomes calculable
Petring, D. | Conference Paper |
| 2016 | Laser carbonization of PAN-nanofiber mats with enhanced surface area and porosity
Go, D.; Lott, P.; Stollenwerk, J.; Thomas, H.; Moeller, M.; Kuehne, A.J.C. | Journal Article |
| 2016 | Laser encapsulation of organic electronics with adapted diode lasers in flexible production processes
Brosda, M.; Olowinsky, A.; Pelzer, A. | Conference Paper, Journal Article |
| 2016 | Laser Metal Deposition of Titanium Aluminides – A Future Repair Technology for Jet Engine Blades?
Rittinghaus,S.; Weisheit, A.; Mathes, M.; Garcia Vargas, W. | Conference Paper |
| 2016 | Laser module based on monolithically integrated MOPAs at 1.5 μm for space-borne LIDAR applications
Fraugeron, M.; Klein, S.; Vilera, M.; Kochem, G.; Pérez-Serrano, A.; Krakowski, M.; Traub, M. | Conference Paper |
| 2016 | Laser schafft sichere Verbindung
Asche, Stefan | Journal Article |
| 2016 | Laser surface pretreatment of 100Cr6 bearing steel - hardening effects and white etching zones
Buling, A.; Sändker, H.; Stollenwerk, J.; Krupp, U.; Hamann-Steinmeier, A. | Journal Article |
| 2016 | Laser technology for lightweight industrial applications
Straeten, K. van der; Britten, S.; Schneider, F.; Janssen, S.; Engelmann, C. | Journal Article |
| 2016 | Laser-assisted vacuum arc extreme ultraviolet source. A comparison of picosecond and nanosecond laser triggering
Beyene, G.A.; Tobin, I.; Juschkin, L.; Hayden, P.; O'Sullivan, G.; Sokell, E.; Zakharov, V.S.; Zakharov, S.V.; O'Reilly, F. | Journal Article |
| 2016 | Laser-based drying of battery electrode layers
Vedder, C.; Hawelka, D.; Wolter, M.; Leiva, D.; Stollenwerk, J.; Wissenbach, K. | Conference Paper |
| 2016 | Laser-based functionalization of electronic multi-material-layers for embedded sensors
Vedder, C.; Wollgarten, S.; Gradmann, R.; Stollenwerk, J.; Wissenbach, K.; Eberstein, M. | Conference Paper |
| 2016 | Laser-based joining of hybrid plastic-metal-components by increasing specific adhesion
Straeten, K. van der; Zibner, F.; Olowinsky, A.; Gillner, A. | Conference Paper |
| 2016 | Laser-based stapes surgery
Ilgner, J.; Wehner, M.; Bovi, M.; Westhofen, M. | Book Article |
| 2016 | Laser-induced breakdown spectroscopy of scaled steel samples taken from continuous casting blooms
Meinhardt, C.; Sturm, V.; Fleige, R.; Fricke-Begemann, C.; Noll, R. | Journal Article |
| 2016 | Laser-induced self-organizing microstructures on steel for joining with polymers
Straeten, K. van der; Burkhardt, I.; Olowinsky, A.; Gillner, A. | Journal Article, Conference Paper |
| 2016 | Laser-induced-forward transfer - a tool for cell sorting and printing
Nottrodt, N.; Khalil, N.; Riester, D.; Gillner, A.; Wehner, M. | Abstract |
| 2016 | Laser-triggered electron source for x-ray applications
Wueppen, J.; Strotkamp, M.; Hoffmann, D.; Russbueldt, P.; Mans, T.; Fritzler, S.; Schippel, S. | Book Article |
| 2016 | Laserauftragschweißen mit der Aluminiumlegierung AlSi10Mg : Qualifizierung, mechanische Eigenschaften und Gefügeanalyse
Thiele, W. | Dissertation |
| 2016 | Laserfunktionalisierung von nasschemisch applizierten piezoelektrischen Blei-Zirkonat-Titanat-Schichten
Meixner, M. | Dissertation |
| 2016 | Laserinduzierte Ablation von biologischem Hartgewebe unter Wasser mit Pikosekundenpulsen im sichtbaren Spektralbereich
Tulea, C.-A. | Dissertation |
| 2016 | Laserstrahlschweißen ultrahochfester Stähle - Stand und Perspektiven
Dahmen, M.; Janzen, V.; Lindner, S.; Monfort, D.; Wagener, R. | Conference Paper |
| 2016 | Lasertechnik für industrielle Leichtbauanwendungen
Straeten, K. van der; Britten, S.; Schneider, F.; Janssen, S.; Engelmann, C. | Journal Article |
| 2016 | Leistungsfähigkeit und Eigenschaften einer additiv gefertigten Spule für die induktive Erwärmung im MHz-Bereich
Habschied, M.; Dietrich, S.; Heussen, D.; Schulze, V. | Journal Article |
| 2016 | Lensless proximity EUV lithography with a Xenon gas discharge plasma radiation
Kim, H.; Danylyuk, S.; Brose, S.; Loosen, P.; Bergmann, K.; Brocklesby, W.S.; Juschkin, L. | Conference Paper |
| 2016 | Lloyd's mirror interference lithography with EUV radiation from a high-harmonic source
Kim, H.; Baksh, P.; Odstrcil, M.; Miszczak, M.; Frey, J.G.; Juschkin, L.; Brocklesby, W.S. | Journal Article |
| 2016 | Load bearing behaviour of self-tapping screws in laser-drilled guideholes
Trautz, M.; Koj, C.; Uchtmann, H. | Conference Paper |
| 2016 | Maschinenspezifische Kostentreiber bei der additiven Fertigung mittels Laser-Strahlschmelzen (LBM)
Schrage, J. | Conference Paper |
| 2016 | Material properties of IN718 processed with High-Power Selective Laser Melting
Bremen, S.; Meiners, W.; Wissenbach, K. | Conference Paper |
| 2016 | Mechanical properties and fracture behaviour of LMD produced 2.4682 and wrought 2.4630 dissimilar welds
Dahmen, M.; Göbel, M. | Journal Article, Conference Paper |
| 2016 | Mehrstrahlinterferenz zur direkten, großflächigen Nanostrukturierung durch Laserablation
Steger, M. | Dissertation |
| 2016 | A Metamodeling Approach Towards Virtual Production Intelligence
Al Khawli, T. | Dissertation |
| 2016 | A microfluidic opto-caloric switch for sorting of particles by using 3D-hydrodynamic focusing based on SLE fabrication capabilities
Meineke, G.; Hermans, M.; Klos, J.; Lenenbach, A.; Noll, R. | Journal Article |
| 2016 | Microstructure and properties of WE43 manufactured via SLM
Zumdick, N.A.; Jauer, L.; Kersting, L.C.; Meiners, W.; Kutz, T.N.; Zander, D. | Abstract |
| 2016 | Microstructures and tensile properties of Inconel 718 formed by high deposition-rate laser metal deposition
Zhong, C.; Gasser, A.; Kittel, J.; Fu, J.; Ding, Y.; Poprawe, R. | Journal Article |
| 2016 | Modeling for self-optimization in laser cutting
Hermanns, T.; Thombansen, U.; Nießen, M.; Jansen, U.; Schulz, W. | Book Article |
| 2016 | Modelling pH-optimized degradation of microgel-functionalized polyesters
Bürgermeister, L.; Hermann, M.; Feher, K.; Molano Lopez, C.; Pich, A.; Hannen, J.; Vogt, F.; Schulz, W. | Journal Article |
| 2016 | Modulares hybrides Laserstrahl-Bohren
Uchtmann, H. | Dissertation |
| 2016 | Monocrystalline CVD-diamond optics for high-power laser applications
Holly, C.; Traub, M.; Hoffmann, D.; Widmann, C.; Brink, D.; Nebel, C.; Gotthardt, T.; Sözbir, M.C.; Wenzel, C. | Conference Paper |
| 2016 | Nonlinear pulse compression in a multi-pass cell
Schulte, J.; Sartorius, T.; Weitenberg, J.; Vernaleken, A.; Russbueldt, P. | Journal Article |
| 2016 | Novel process for butt-joined plastic-metal hybrid compounds
Engelmann, C.; Oster, L.; Olowinsky, A.; Mamuschkin, V.; Arntz, D. | Conference Paper |
| 2016 | Observation of melting conditions in selective laser melting of metals (SLM)
Thombansen, U.; Abels, P. | Conference Paper |
| 2016 | Open-porous biodegradable magnesium scaffolds produced by selective laser melting for individualized bone replacement
Witte, F.; Jauer, L.; Meiners, W.; Kronbach, Z.; Strohschein, K.; Schmidt, T. | Conference Paper |
| 2016 | Optical coherence tomography for the middle and inner ear
Ilgner, J.; Just, T.; Farkas, C.; Lenenbach, A.; Westhofen, M. | Book Article |
| 2016 | Optische Systeme für die hochpräzise, scannerbasierte Multistrahlbearbeitung mit ultrakurzen Laserpulsen
Büsing, L. | Dissertation |
| 2016 | Parameter optimization for high speed remote laser cutting of electrodes for lithium-ion batteries
Lee, D.; Patwa, R.; Herfurth, H.; Mazumder, J. | Journal Article |
| 2016 | Piezo-based, automated active alignment of laser resonators
Prochnau, M.; Greger, D.; Gatej, A.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2016 | Precipitation reactions in age-hardenable alloys during laser additive manufacturing
Jägle, E.A.; Sheng, Z.; Wu, L.; Lu, L.; Risse, J.; Weisheit, A.; Raabe, D. | Journal Article |
| 2016 | Principles and applications of trans-wafer processing using a 2-µm thulium fiber laser
Mingareev, I.; Gehlich, N.; Bonhoff, T.; Abdulfattah, A.; Sincore, A.M.; Kadwani, P.; Shah, L.; Richardson, M. | Journal Article |
| 2016 | Printing and processing techniques
Ganz, S.; Sauer, H.M.; Weißenseel, S.; Zembron, J.; Tone, R.; Dörsam, E.; Schaefer, M.; Schulz-Ruhtenberg, M. | Book Article |
| 2016 | Produktivitätssteigerung bei der Laserpolitur: Zehnfache Erhöhung der Flächenrate beim Laserpolieren von gefrästen Stählen dank neuer Strahlprofile
Hauschild, D.; Kumstel, J.; Willenborg, E. | Journal Article |
| 2016 | Ptychographic imaging with a tin plasma based EUV light source
Bußmann, J.; Odstrcil, M.; Bresenitz, R.; Teramoto, Y.; Juschkin, L. | Book Article |
| 2016 | Restorative self-image of rough-line grids
Kim, H.; Li, W.; Marconi, M.C.; Brocklesby, W.S.; Juschkin, L. | Journal Article |
| 2016 | Selective laser melting of magnesium alloys
Jauer, L.; Meiners, W.; Vervoort, S.; Gayer, C.; Zumdick, N.A.; Zander, D. | Conference Paper |
| 2016 | Self-optimizing production systems
Permin, Eike; Bertelsmeier, Felix; Blum, Matthias; Bützler, Jennifer; Haag, Sebastian; Kuz, Sinem; Özdemir, Denis; Stemmler, Sebastian; Thombansen, Ulrich; Schmitt, Robert; Brecher, Christian; Schlick, Christopher; Abel, Dirk; Poprawe, Reinhart; Loosen, Peter; Schulz, Wolfgang; Schuh, Günther | Journal Article, Conference Paper |
| 2016 | Sensor-based sorting of spent refractory bricks
Knapp, H.; Horckmans, L.; Bouillot, F.; Fricke-Begemann, C.; Connemann, S.; Makowe, J.; Ducastel, A.; Stark, A. | Conference Paper |
| 2016 | Simulation and measurement of thermo-optical effects in an f-theta lens at high laser power
Bonhoff, T.; Gayer, C.; Stollenwerk, J.; Loosen, P. | Conference Paper |
| 2016 | Simultaneous frequency stabilization and high-power dense wavelength division multiplexing (HP-DWDM) using an external cavity based on volume Bragg gratings (VBGs)
Hengesbach, S.; Klein, S.; Holly, C.; Witte, U.; Traub, M.; Hoffmann, D. | Conference Paper |
| 2016 | Simultaneous frequency stabilization, wavelength multiplexing and improvement of beam quality using a self-optimizing external cavity diode laser
Hengesbach, S.; Klein, S.; Traub, M.; Witte, U. | Journal Article |
| 2016 | Single exposure imaging of talbot carpets and resolution characterization of detectors for micro- and nano-patterns
Kim, H.; Danylyuk, S.; Brocklesby, W.S.; Juschkin, L. | Journal Article |
| 2016 | A single-frequency double-pulse Ho:YLF laser for CO2-lidar
Kucirek, P.; Meissner, A.; Eiselt, P.; Höfer, M.; Hoffmann, D. | Conference Paper |
| 2016 | Sn-fueled high-brightness compact EUV light source
Teramoto, Y.; Santos, B.; Mertens, G.; Kops, R.; Kops, M.; Wezyk, A. von; Bergmann, K.; Yabuta, H.; Nagano, A.; Ashizawa, N.; Taniguchi, Y.; Shirai, T.; Kasama, K. | Conference Paper |
| 2016 | Sublimationsschneiden von Silizium mit ultrakurz gepulster Laserstrahlung
Fornaroli, C. | Dissertation |
| 2016 | Surface characterization and short-term adhesion to Zirconia after ultra-short pulsed laser irradiation
Esteves Oliveira, M.; Jansen, P.; Wehner, M.; Dohrn, A.; Bello-Silva, M.S.; Paula Eduardo, C. de; Meyer-Lueckel, H. | Journal Article |
| 2016 | Table-top EUV scatterometer MARYS with high-brightness discharge plasma source
Maryasov, O.; Juschkin, L. | Book Article |
| 2016 | Theoretical and experimental analysis of scan angle-depending pulse front tilt in optical systems for laser scanners
Büsing, L.; Bonhoff, T.; Behnke, L.; Stollenwerk, J.; Loosen, P. | Journal Article |
| 2016 | Time-resolved investigations of the non-thermal ablation process of graphite induced by femtosecond laser pulses
Kalupka, C.; Finger, J.; Reininghaus, M. | Journal Article |
| 2016 | Transverse pump-probe microscopy of moving breakdown, filamentation and self-organized absorption in alkali aluminosilicate glass using ultrashort pulse laser
Grossmann, D.; Reininghaus, M.; Kalupka, C.; Kumkar, M.; Poprawe, R. | Journal Article |
| 2016 | Ultra-fast micro machining of cylindrical parts with multiple ultra-short pulsed laser sources
Bruening, S.; Du, K.; Gillner, A. | Conference Paper, Journal Article |
| 2016 | Verfahren und Anordnung zur generativen Fertigung von Bauteilen
Leonards, Holger; Hoffmann, Andreas; Gillner, Arnold | Patent |
| 2016 | Verfahren und Vorrichtung zum Sortieren von Mikropartikeln in einem Fluidstrom
Lenenbach, Achim; Noll, Reinhard; Meineke, Georg; Mathis, Harald | Patent |
| 2016 | Verfahren und Vorrichtung zur hochgenauen optischen Messung an Objekten mit anhaftenden fluidischen Schichten
Noll, Reinhard; Kämmerling, Jann | Patent |
| 2016 | Virtual laser cutting simulation of real parameter optimization
Petring, D. | Conference Paper |
| 2016 | Weld metallurgy and mechanical properties of high manganese ultra-high strength steel dissimilar welds
Dahmen, M.; Lindner, S.; Monfort, D.; Petring, D. | Journal Article, Conference Paper |
| 2016 | Wide-field broadband extreme ultraviolet transmission ptychography using a high-harmonic source
Baksh, P.D.; Odstrcil, M.; Kim, H.-S.; Boden, S.A.; Frey, J.G.; Brocklesby, W.S. | Journal Article |