| | |
|---|
| 2021 | 3D relative dose measurement with a µm thin dosimetric layer
Schuster, Christiane; Kuntz, Florent; Strasser, Alain; Härtling, Thomas; Dornich, Kay; Richter, Daniel | Journal Article |
| 2021 | Anwendung eines technischen Platinelektrolyten für die katalytisch aktive Nanopartikel- und Metallschichtabscheidung
Weiser, Mathias
: Michaelis, Alexander | Dissertation |
| 2021 | Biaxial flexural strength of zirconia: A round robin test with 12 laboratories
Spintzyk, Sebastian; Geis-Gerstorfer, Jürgen; Bourauel, Christoph; Keilig, Ludger; Lohbauer, Ulrich; Brune, Annike; Greuling, Andreas; Arnold, Christin; Rues, Stefan; Adjiski, Ranko; Sawada, Tomofumi; Lümkemann, Nina; Stawarczyk, Bogna; Ilie, Nicoleta; Frankenberger, Roland; Dudek, Marie-Christine; Strickstrock, Monika; Begand, Sabine | Journal Article |
| 2021 | Determination of the filler distribution in an epoxy molding compound using high-resolution X-ray computed tomography
Topal, Emre; Gluch, Jürgen; Clausner, André; Cardoso, Andre; Zschech, Ehrenfried | Journal Article |
| 2021 | Estimation of the Filling Distribution and Height Levels Inside an Insulated Pressure Vessel by Guided Elastic Wave Attenuation Tomography
Neubeck, Robert; Stephan, Mareike; Gaul, Tobias; Weihnacht, Bianca; Schubert, Lars; Bindingsbø, Arne Ulrik; Østvik, Jan-Magnus | Journal Article |
| 2021 | Evaluation of indium tin oxide for gas sensing applications: Adsorption/desorption and electrical conductivity studies on powders and thick films
Dietrich, Stefan; Kusnezoff, Mihails; Petasch, Uwe; Michaelis, Alexander | Journal Article |
| 2021 | Facile deposition of multiwalled carbon nanotubes via electrophoretic deposition in an environmentally friendly suspension
Schneider, Michael; Weiser, Mathias; Ferl, Sandra; Krasmann, Christian; Potthoff, Annegret; Voigt, Karsten; Malcher, Peter | Journal Article |
| 2021 | Formation Mechanism of Electrodeposited Sb/Sb2O3 Micro-Composites
Voigt, Karsten; Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2021 | Functionalized silicon substrates with stripe-patterned surface-near electrostatic forces for the self-organized, stable immobilization of biomolecules
Blaschke, Daniel; Pahlow, Susanne; Fremberg, Tino; Weber, Karina; Müller, Anne Dorothea; Kurz, Susanne; Spohn, Juliane; Dhandapani, Vignesh; Rebohle, Lars; Skorupa, Ilona; Schmidt, Heidemarie | Journal Article |
| 2021 | How does grazing incidence ultrasonic microscopy work? A study based on grain-scale numerical simulations
Kalkowski, Michal; Lowe, Michael J.S.; Barth, Martin; Rjelka, Marek; Köhler, Bernd | Journal Article |
| 2021 | Hydrophobic ceramic membranes in MD processes - Impact of material selection and layer characteristics
Schnittger, Johann; McCutcheon, Jeffrey R.; Hoyer, Thomas; Weyd, Marcus; Fischer, Gundula; Puhlfürß, Petra; Halisch, Matthias; Voigt, Ingolf; Lerch, André | Journal Article |
| 2021 | In-plane heatwave thermography as digital inspection technique for fasteners in aircraft fuselage panels
Stamm, Michael; Krüger, Peter; Pfeiffer, Helge; Köhler, Bernd; Reynaert, Johan; Wevers, Martine | Journal Article |
| 2021 | Industrial application of ceramic nanofiltration membranes for water treatment in oil sands mines
Motta Cabrera, Sandra; Winnubst, Louis; Richter, Hannes; Voigt, Ingolf; Nijmeijer, Arian | Journal Article |
| 2021 | Influence of Simultaneous Cr2O3 and TiO2 Additions on the Microstructure and Properties of APS Alumina Coatings
Conze, Susan; Grimm, Maximilian; Berger, Lutz-Michael; Thiele, Sven; Drehmann, Rico; Lampke, Thomas | Journal Article |
| 2021 | Microstructure and fracture mechanism investigation of porous silicon nitride-zirconia-graphene composite using multi-scale and in-situ microscopy
Liao, Zhongquan; Standke, Yvonne; Gluch, Jürgen; Balazsi, Katalin; Pathak, Onkar; Höhn, Sören; Herrmann, Mathias; Werner, Stephan; Dusza, Jan; Balazsi, Csaba; Zschech, Ehrenfried | Journal Article |
| 2021 | Ni-Cu-Zn ferrites with high Curie temperature for multilayer inductors with increased operating temperatures
Reimann, Timmy; Capraro, Beate; Bartsch, Heike; Töpfer, Jörg | Journal Article |
| 2021 | Piezoresistive characteristics of MOSFET channels determined with indentation
Schlipf, Simon; Clausner, André; Paul, Jens; Capecchi, Simone; Wambera, Laura; Meier, Karsten; Zschech, Ehrenfried | Journal Article |
| 2021 | Processing of large and complex-shaped fine-grained alumina bodies with high transparency
Trunec, Martin; Kastyl, Jaroslav; Stastny, Premsyl; Hildebrandt, Stefanie | Journal Article |
| 2021 | Production and properties of high entropy carbide based hardmetals
Pötschke, Johannes; Dahal, Manisha; Vornberger, Anne; Herrmann, Mathias; Michaelis, Alexander | Journal Article |
| 2021 | Recent Insights into Rate Performance Limitations of Li-ion Batteries
Heubner, Christian; Nikolowski, Kristian; Reuber, Sebastian; Schneider, Michael; Wolter, Mareike; Michaelis, Alexander | Journal Article |
| 2021 | Untersuchungen zum Electrochemical Machining von Wolframcarbid-Cobalt
Schubert, Nora
: Michaelis, Alexander | Dissertation |
| 2021 | Volume crystallization and microwave dielectric properties of indialite/cordierite glass by TiO2 addition
Ohsato, Hitoshi; Varghese, Jobin; Kan, Akinori; Kim, Jeong Seog; Kagomiya, Isao; Ogawa, Hirotaka; Sebastian, Mailadil Thomas; Jantunen, Heli | Journal Article |
| 2021 | Work function performance of a C12A7 electride surface exposed to low pressure low temperature hydrogen plasmas
Heiler, Adrian; Wätzig, Katja; Tajmar, Martin; Friedl, Roland; Nocentini, Riccardo; Fantz, Ursel | Journal Article |
| 2020 | 3D HR-EBSD Characterization of the plastic zone around crack tips in tungsten single crystals at the micron scale
Kalácska, Szilvia; Ast, Johannes; Ispánovity, Péter Dusán; Michler, Johann; Maeder, Xavier | Journal Article |
| 2020 | 3D-gedruckte Keramikteile für Luft- und Raumfahrtanwendungen
Abel, Johannes; Tiwari, Siddharth; Lafont, Ugo | Journal Article |
| 2020 | Acoustic Resonance Recognition of Coins
Kraljevski, Ivan; Duckhorn, Frank; Ju, Yong Chul; Tschöpe, Constanze; Richter, Christian; Wolff, Matthias | Conference Paper |
| 2020 | Acoustic resonance testing of glass IV bottles
Kraljevski, Ivan; Duckhorn, Frank; Ju, Yong Chul; Tschöpe, Constanze; Wolff, Matthias | Conference Paper |
| 2020 | All-silicon polarized light source based on electrically excited whispering gallery modes in inversely tapered photonic resonators
Schmitt, Sebastian; Schwarzburg, Klaus; Sarau, George; Christiansen, Silke; Wiesner, Sven; Dubourdieu, Catherine | Journal Article |
| 2020 | Analyse von Schwindungsfeldern bei planaren LTCC-Substraten und deren Berücksichtigung im Entwurf von mikrosystemtechnischen Komponenten
Lenz, Christian
: Michaelis, Alexander | Dissertation |
| 2020 | Anisotropy of Mechanical Properties of Pinctada margaritifera Mollusk Shell
Strag, Martyna; Maj, Åukasz; Bieda, Magdalena; Petrzak, PaweÅ; Jarzebska, Anna; Gluch, Jürgen; Topal, Emre; Kutukova, Kristina; Clausner, André; Heyn, Wieland; Berent, Katarzyna; Nalepka, Kinga; Zschech, Ehrenfried; Checa, Antonio G.; Sztwiertnia, Srzysztof | Journal Article |
| 2020 | Application of composite coatings as protection/contacting layers for metallic high-chromium-content SOFC interconnect material
Sauchuk, Viktar; Trofimenko, Nikolai; Megel, Stefan; Rothe, Stefan; Schilm, Jochen; Andritschky, Martin; Hiller, Michael; Goebel, Claudia; Froitzheim, Jan; Kusnezoff, Mihails | Conference Paper |
| 2020 | Application-Oriented Modeling and Optimization of Tailored Li-Ion Batteries Using the Concept of Diffusion Limited C-rate
Heubner, Christian; Reuber, Sebastian; Seeba, Jann; Marcinkowski, Peter; Nikolowski, Kristian; Schneider, Michael; Wolter, Mareike; Michaelis, Alexander | Journal Article |
| 2020 | Beschichtung für implantierbare medizinische Geräte, Verfahren zu deren Herstellung sowie implantierbares medizinisches Gerät
Balakin, Sascha; Opitz, Jörg | Patent |
| 2020 | Biospeckle-characterization of hairy root cultures using laser speckle photometry
Schott, Carolin; Steingroewer, Juliane; Bley, Thomas; Cikalova, Ulana; Bendjus, Beatrice | Journal Article |
| 2020 | Breakthrough Screening of Porous Materials: A Simple and Effective Tool for Database Generation
Piscopo, Calogero Giancarlo; Polyzoidis, Angelos; Werner, David; Ahlhelm, Matthias; Richter, Hans-Jürgen | Journal Article |
| 2020 | CerAMfacturing of Si3N4 components
Scheithauer, Uwe; Abel, Johannes; Schwarzer, Eric; Weingarten, Steven; Kunz, Willy; Moritz, Tassilo; Klemm, Hagen | Journal Article |
| 2020 | Ceramic injection moulding: Developments in production technology, materials and applications
Moritz, Tassilo | Journal Article |
| 2020 | Ceramic microhotplates for low power metal oxide gas sensors
Samotaev, Nikolay; Oblov, Konstantin; Gorshkova, Anastasiya; Fritsch, Marco; Mosch, Sindy; Vinnichenko, Mykola; Trofimenko, Nikolai; Kusnezoff, Mihails; Fuchs, Franz-Marin; Wissmeier, Lena | Journal Article, Conference Paper |
| 2020 | Ceramic-like composite systems for winding insulation of electrical machines
Miersch, Sören; Schubert, Ralph; Schuhman, Thomas; Schuffenhauer, Uwe; Buddenbohm, Markus; Beyreuther, Markus; Kuhn, Jeannette; Lindner, Mathias; Cebulski, Bernd; Jung, Jakob | Conference Paper |
| 2020 | Changes in the coating composition due to APS process conditions for Al2O3-Cr2O3-TiO2 ternary powder blends
Grimm, Maximilian; Conze, Susan; Berger, Lutz-Michael; Paczkowski, Gerd; Drehmann, Rico; Lampke, Thomas | Journal Article |
| 2020 | Characterization of a silicon nitride ceramic material for ceramic springs
Khader, I.; Koplin, C.; Schröder, C.; Stockmann, Jens; Beckert, Wieland; Kunz, Willy; Kailer, A. | Journal Article |
| 2020 | Characterization of Ceramics based on Laser Speckle Photometry
Chen, Lili; Cikalova, Ulana; Münch, Stefan; Bendjus, Beatrice; Röllig, Mike | Journal Article |
| 2020 | Chemoadsorption for separation of Hydrogen Sulfide from biogas with iron hydroxide and sulfur recovery
Lincke, Marc; Petasch, Uwe; Gaitzsch, Uwe; Tillmann, Andreas; Tietze, Michael; Niebling, Falko | Journal Article |
| 2020 | Chronoamperometry as an electrochemical in situ approach to investigate the electrolyte wetting process of lithium-ion cells
Peter, Christian; Nikolowski, Kristian; Reuber, Sebastian; Wolter, Mareike; Michaelis, Alexander | Journal Article |
| 2020 | Circuit-Board-Integrated transformers design and manufacture
Matz, Richard; Rabe, Torsten; Töpfer, Jörg; Ziesche, Steffen | Journal Article |
| 2020 | Complementary EIS/FTIR study of the degradation of adhesives in electronic packaging
Schneider, Michael; Gierth, Uta; Simunkova, Lenka; Gierth, Paul; Rebenklau, Lars | Journal Article |
| 2020 | Confined growth of porous nitrogen-doped cobalt oxide nanoarrays as bifunctional oxygen electrocatalysts for rechargeable zinc-air batteries
Wang, Xia; Liao, Zhongquan; Fu, Yubin; Neumann, Christof; Turchanin, Andrey A.; Nam, Gyutae; Zschech, Ehrenfried; Cho, Jaephil; Zhang, Jian; Feng, Xinliang | Journal Article |
| 2020 | Contacting Methods for C12A7 Electride Ceramic
Wätzig, Katja; Rost, Axel; Schilm, Jochen; Tajmar, M.; Michaelis, Alexander | Journal Article |
| 2020 | Convolutional Autoencoders for Health Indicators Extraction in Piezoelectric Sensors
Kraljevski, Ivan; Duckhorn, Frank; Tschöpe, Constanze; Wolff, Matthias | Conference Paper |
| 2020 | Correction to: Magnetic Characterization of Ferromagnetic Shape Memory Components Under Defined Mechanical Loading (Shape Memory and Superelasticity, (2020), 10.1007/s40830-020-00266-2)
Ehle, F.; Neumeister, P.; Haufe, E.; Neubert, H. | Journal Article |
| 2020 | Correlative microscopy and spectroscopy workflow for microplastics
Sarau, George; Kling, Lasse; Oßmann, Barbara; Unger, Ann-Katrin; Vogler, Frank; Christiansen, Silke | Journal Article |
| 2020 | Crack identification in BEoL stacks using acoustic emission testing and nano x-ray computed tomography
Silomon, Jendrik; Gluch, Jürgen; Clausner, André; Paul, Jens; Zschech, Ehrenfried | Conference Paper |
| 2020 | Crack-healing in ytterbium silicate filled with silicon carbide particles
Kunz, Willy; Klemm, Hagen; Michaelis, Alexander | Journal Article |
| 2020 | Creation of modified Cr3C2-NiCr hardmetal coating microstructures through novel processing
Matthews, Steven; Bhagvandas, Meetal; Berger, Lutz-Michael | Journal Article |
| 2020 | Critical assessment of analytical methods for the harmonized and cost-efficient analysis of microplastics
Primpke, Sebastian; Christiansen, Silke; Cowger, Win; DeFrond, Hannah; Deshpande, Ashok D.; Fischer, Marten; Holland, Erika; Meyns, Michaela; O'Donnell, Bridget; Oßmann, Barbara; Pittroff, Marco; Sarau, George; Scholz-Böttcher, Barbara; Wiggin, Kara | Journal Article |
| 2020 | Critical review of processing and classification techniques for images and spectra in microplastic research
Cowger, Win; Gray, Andrew; Christiansen, Silke; DeFrond, Hannah; Deshpande, Ashok D.; Hemabessiere, Ludovic; Lee, Eunah; Mill, Leonid; Munno, Keenan; Oßmann, Barbara; Pittroff, Marco; Rochman, Chelsea; Sarau, George; Tarby, Shannon; Primpke, Sebastian | Journal Article |
| 2020 | Deep learning-based inaccuracy compensation in reconstruction of high resolution XCT data
Topal, Emre; Löffler, Markus; Zschech, Ehrenfried | Journal Article |
| 2020 | Degradation analysis of CFY-stacks MK35x - a guide for exact measurement
Megel, Stefan; Rothe, Stefan; Schöne, Jakob; Sauchuk, Viktar; Trofimenko, Nikolai; Schilm, Jochen; Kusnezoff, Mihails | Conference Paper |
| 2020 | Delayed formation of thermally grown oxide in environmental barrier coatings for non-oxide ceramic matrix composites
Klemm, Hagen; Schönfeld, Katrin; Kunz, Willy | Journal Article |
| 2020 | Detailed insight into processes of reversible solid oxide cells and stacks using DRT analysis
Subotić, Vanja; Königshofer, Benjamin; Juričić, Đani; Kusnezoff, Mihails; Schroettner, Hartmuth; Hochenauer, Christoph; Boškoski, Pavle | Journal Article |
| 2020 | Determination of bulk residual stresses in superhard diamond-SiC materials
Matthey, Björn; Pirling, Thilo; Herrmann, Mathias; Schreiber, Jürgen | Journal Article |
| 2020 | Determination of the entire stent surface area by a new analytical method
Saqib, Muhammad; Bernhardt, Ricardo; Kästner, Markus; Beshchasna, Natalia; Cuniberti, Gianaurelio; Opitz, Jörg | Journal Article |
| 2020 | Development of a mass flow sensor based on Low Temperature Cofired Ceramics for analysis of exhaust gas up to 500 °C
Lohrberg, Carolin; Lenz, Christian; Kreher, Lisa; Bechtold, Franz; Carstens, Stefan; Springer, Gert; Ziesche, Steffen | Conference Paper |
| 2020 | Diepoxides and bisphosphonates as potential candidates for anti-calcification treatment of aortic heart valve bioprostheses
Maciejewska, Agnieszka; Ritter, Jan; Kiesendahl, Nicole; Zhuravleva, Irina Yu; Timchenko, Tatyana P; Bogachev-Prokophiev, Alexander V.; Menne, Matthias; Beshchasna, Natalia; Opitz, Jörg; Steinseifer, Ulrich | Journal Article, Conference Paper |
| 2020 | Differential volumetric analysis combined with monitoring of differential ultra-sound travel time, an approach for tracing fine-structural compression behaviour of solids
Mirwald, Peter W.; Paulini, Peter; Hutzler, Thomas | Journal Article |
| 2020 | Diffusion-limited C-rate: A fundamental principle quantifying the intrinsic limits of Li-Ion batteries
Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2020 | Direct measurements of Rayleigh wave acoustoelastic constants for shot-peened superalloys
Gartsev, Sergey; Köhler, Bernd | Journal Article |
| 2020 | The E.T.PACK Project: Towards a fully passive and consumable-less deorbit kit based on low-work-function tether technology
Sanchez-Arriaga, Gonzalo; Naghdi, Samira; Wätzig, Katja; Schilm, Jochen; Lorenzini, Enrico C.; Tajmar, Martin; Urgoiti, Eduardo; Tarabini Castellani, Lorenzo; Plaza, J.F.; Post, A. | Journal Article |
| 2020 | Electrochemical Alkali-Ion Exchange in Electrode Materials for Secondary Batteries
Lein, Tobias; Heubner, Christian; Matthey, Björn; Schneider, Michael; Michaelis, Alexander | Poster |
| 2020 | Electrochemical corrosion resistance of Ni and Co bonded near-nano and nanostructured cemented carbides
Fabijanić, Tamara Aleksandrov; Kurtela, Marin; Škrinjarić, Irbas; Pötschke, Johannes; Mayer, Markus | Journal Article |
| 2020 | Electrochemical single-particle measurements of electrode materials for Li-ion batteries: Possibilities, insights and implications for future development
Heubner, Christian; Langklotz, Ulrike; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2020 | Electrodeposition of Versatile Nanostructured Sb/Sb2O3 Microcomposites
Voigt, Karsten; Heubner, Christian; Liebmann, Tobias; Matthey, Björn; Weiser, Mathias; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2020 | Engineering of Surfaces by the Use of Detonation Nanodiamonds. Towards Drug-eluting Coatings of Biomaterials
Balakin, Sascha
: Cuniberti, Gianaurelio (Gutachter); Wiesmann, Hans-Peter (Gutachter); Yeo, Jong-Souk (Gutachter) | Dissertation |
| 2020 | Enhanced KLM model for single-fibre piezocomposite transducers
Angerer, Martin; Zapf, Michael; Gebhardt, Sylvia; Neubert, Holger; Ruiter, Nicole V. | Conference Paper |
| 2020 | Epitaktische BaTiO3-basierte Schichten für elektrokalorische Untersuchungen
Engelhardt, Stefan
: Nielsch, Kornelius (Gutachter); Dörr, Kathrin (Gutachter); Michaelis, Alexander (Gutachter) | Dissertation |
| 2020 | Erforschung eines Algorithmus sowie Messsystems zur kamerabasierten Detektion und Klassifikation von lokalen Störungen spiegelnd lackierter Oberflächen
Kieselbach, Kim Katharina
: Heuer, Henning (Betreuer); Janschek, Klaus (Gutachter); Tutsch, Rainer (Gutachter); Oppermann, Martin (weiteres Mitglied) | Dissertation |
| 2020 | Experimental and numerical analysis of the complex permittivity of open-cell ceramic foams
Camacho Hernandez, Jesus Nain; Link, Guido; Soldatov, Sergey; Füssel, Alexander; Schubert, Markus; Hampel, Uwe | Journal Article |
| 2020 | Extrusion-based fabrication of electrodes for high-energy Li-ion batteries
Seeba, Jann; Reuber, Sebastian; Heubner, Christian; Müller-Köhn, Axel; Wolter, Mareike; Michaelis, Alexander | Journal Article |
| 2020 | Facile fabrication of nanostructured alumina membranes
Voigt, Karsten; Heubner, Christian; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2020 | FEM-study for solder model comparison on solder joints stress-strain effects
Schwerz, Robert; Metasch, René; Röllig, Mike; Meier, Karsten | Conference Paper |
| 2020 | Field-structured magnetic elastomers based on thermoplastic polyurethane for fused filament fabrication
Dohmen, Eike; Saloum, Alexander; Abel, Johannes | Journal Article |
| 2020 | Formation and crystallographic orientation of NiSi2-Si interfaces
Fuchs, Florian; Bilal Khan, Muhammad; Deb, Dipjyoti; Pohl, Darius; Schuster, Jörg; Weber, Walter M.; Mühle, Uwe; Löffler, Markus; Georgiev, Yordan M.; Erbe, Artur; Gemming, Sibylle | Journal Article |
| 2020 | Fraunhofer Institute for Ceramic Technologies and Systems IKTS. Annual Report 2019/2020
| Annual Report |
| 2020 | Fraunhofer-Institut für Keramische Technologien und Systeme. Jahresbericht 2019/2020
| Annual Report |
| 2020 | An FT-IRRAS-study of anodic oxide films on aluminum alloys and the impact of bath aging
Schneider, Michael; Gierth, Uta; Kremmer, Kerstin | Journal Article |
| 2020 | Ga-, Y-, and Sc-substituted M-type ferrites for self-biasing circulators in LTCC microwave modules
Heidenreich, Manuel; Ma, Xinyi; Gitzel, Wanja; Jacob, Arne; Capraro, Beate; Töpfer, Jörg | Journal Article |
| 2020 | GITT Analysis of Lithium Insertion Cathodes for Determining the Lithium Diffusion Coefficient at Low Temperature: Challenges and Pitfalls
Nickol, Alexander; Schied, Thomas; Heubner, Christian; Schneider, Michael; Michaelis, Alexander; Bobeth, Manfred; Cuniberti, Gianaurelio | Journal Article |
| 2020 | Grain-size effects on multi-wire slurry sawing of translucent alumina ceramics
Schmidtner, Lea; Herrmann, Mathias; Aneziris, Christos G. | Journal Article |
| 2020 | Graphene added multilayer ceramic sandwich (GMCS) composites: Structure, preparation and properties
Balazsi, Katalin; Furko, Monika; Liao, Zhongquan; Fogarassy, Zsolt; Medved, David; Zschech, Ehrenfried; Dusza, Jan; Balazsi, Csaba | Journal Article |
| 2020 | Grüner Wasserstoff in der Rohstahlerzeugung
Herz, Gregor; Müller, Nils; Adam, Paul; Megel, Stefan; Reichelt, Erik; Jahn, Matthias | Journal Article |
| 2020 | High temperature Co-electrolysis as a key technology for CO2 emission mitigation - A model-based assessment of CDA and CCU
Herz, Gregor; Müller, Nils; Adam, Paul; Megel, Stefan; Reichelt, Erik; Jahn, Matthias | Journal Article |
| 2020 | High Temperature Packaging for Sensor Elements
Rebenklau, Lars; Gierth, Paul; Barth, Henry | Conference Paper |
| 2020 | High-Rate laser surface texturing for advanced tribological functionality
Schille, Jörg; Schneider, Lutz; Mauersberger, Stefan; Szokup, Sylvia; Höhn, Sören; Pötschke, Johannes; Reiß, Friedemann; Leidich, Erhard; Löschner, Udo | Journal Article |
| 2020 | High-velocity water vapor corrosion of Yb-silicate: Sprayed vs. sintered body
Bakan, Emine; Kindelmann, Moritz; Kunz, Willy; Klemm, Hagen; Vaßen, Robert | Journal Article |
| 2020 | Hochtemperaturversiegelung für thermisch gespritzte Schichten
Hildebrandt, Stefanie; Berger, Lutz-Michael | Journal Article |
| 2020 | Hydrogel-based chemical and biochemical sensors
Gerlach, Gerald; Günther, Margarita; Härtling, Thomas | Journal Article |
| 2020 | Hydrophobic, carbon free gas diffusion electrode for alkaline applications
Bekisch, Artur; Skadell, Karl; Poppitz, David; Schulz, Matthias; Weidl, Roland; Stelter, Michael | Journal Article |
| 2020 | Impact of precrystallized NaYSi4O12 powders in the synthesis of sodium conducting solid electrolytes
Wagner, Dörte; Schilm, Jochen; Lee, Chang Woo; Kusnezoff, Mihails | Journal Article |
| 2020 | In situ preparation of crosslinked polymer electrolytes for lithium ion batteries: A comparison of monomer systems
Röchow, Eike Thomas; Coeler, Matthias; Pospiech, Doris; Kobsch, Oliver; Mechtaeva, Elizaveta; Vogel, Roland; Voit, Brigitte; Nikolowski, Kristian; Wolter, Mareike | Journal Article |
| 2020 | In vitro characterization of osteoblast cells on polyelectrolyte multilayers containing detonation nanodiamonds
Balakin, Sascha; Yun, Young-Shik; Lee, Jihye; Kang, Eun-Hye; Spohn, Juliane; Yun, In-Sik; Opitz, Jörg; Cuniberti, Gianaurelio; Yeo, Jong-Souk | Journal Article |
| 2020 | In-operando monitoring and lifetime improvement of SOFCs on single-cell and stack level
Subotić, Vanja; Kusnezoff, Mihails; Pofahl, Stefan; Lawlor, Vincent; Königshofer, Benjamin; Napporn, Teko W.; Megel, Stefan; Hochenauer, Christoph | Conference Paper |
| 2020 | Influence of cemented carbide composition on cutting temperatures and corresponding hot hardnesses
Vornberger, Anne; Picker, Tobias; Pötschke, Johannes; Herrmann, Mathias; Denkena, Berend; Krödel, Alexander; Michaelis, Alexander | Journal Article |
| 2020 | Influence of microstructure on hardness and thermal conductivity of hardmetals
Vornberger, Anne; Pötschke, Johannes; Gestrich, Tim; Herrmann, Mathias; Michaelis, Alexander | Journal Article |
| 2020 | Influence of surface characteristics on the penetration rate of electrolytes into model cells for lithium ion batteries
Beyer, Sebastian; Kobsch, Oliver; Pospiech, Doris; Simon, Frank; Peter, Christian; Nikolowski, Kristian; Wolter, Mareike; Voit, Brigitte | Journal Article |
| 2020 | Influence of the brazing paste composition on the wetting behavior of reactive air brazed metal-ceramic joints
Wätzig, Katja; Schilm, Jochen; Mosch, Sindy; Tillmann, Wolfgang; Eilers, Arne; Wojarski, Lukas | Journal Article |
| 2020 | Influence of tool material properties on the wear behavior of cemented carbide tools with rounded cutting edges
Denkena, Berend; Michaelis, Alexander; Herrmann, Mathias; Pötschke, Johannes; Krödel, Alexander; Vornberger, Anne; Picker, Tobias | Journal Article |
| 2020 | Infrared transparent ceramic windows 2 for high-speed vehicles
Ragulya, Andrey; Kolesnichenko, Valeriy; Herrmann, Mathias | Conference Paper |
| 2020 | Insights into the electrochemical Li/Na-exchange in layered LiCoO2 cathode material
Heubner, Christian; Matthey, Björn; Lein, Tobias; Wolke, Florian; Liebmann, Tobias; Lämmel, Christoph; Schneider, Michael; Herrmann, Mathias; Michaelis, Alexander | Journal Article |
| 2020 | Intercalation materials for secondary batteries based on alkali metal exchange: Developments and perspectives
Heubner, Christian; Lein, Tobias; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2020 | Investigation of the passive layer on a solid-state sintered silicon carbide ceramic formed in sulfuric acid
Schneider, Michael; Kremmer, Kerstin; Voigt, Markus; Grundmeier, Guido | Journal Article |
| 2020 | Investigations of internal stresses in high-voltage devices with deep trenches
Hieckmann, Ellen; Mühle, Uwe; Chekhonin, Paul; Zschech, Ehrenfried; Gambino, Jeff | Journal Article |
| 2020 | Das Konzept der Metallionen-Hybridbatterie am Beispiel ausgewählter Oxidsysteme
Maletti, Sebastian
: Michaelis, Alexander | Dissertation |
| 2020 | Korrosion und elektrochemisches Verhalten von siebgedruckten Metall-Keramik-Werkstoffverbunden
Junker, Nils
: Michaelis, Alexander (1. Gutachter); Feser, Ralf (2. Gutachter) | Dissertation |
| 2020 | Lightweight polymer-carbon composite current collector for lithium-ion batteries
Fritsch, Marco; Coeler, Matthias; Kunz, Karina; Krause, Beate; Marcinkowski, Peter; Pötschke, Petra; Wolter, Mareike; Michaelis, Alexander | Journal Article |
| 2020 | Local mechanical properties at the dendrite scale of Ni-Based superalloys studied by advanced high temperature indentation creep and micropillar compression tests
Haußmann, Lukas; Neumeier, Steffen; Kolb, Markus; Ast, Johannes; Mohanty, Gaurav; Michler, Johann; Göken, Mathias | Conference Paper |
| 2020 | Low work-function tether Deorbit Kit
Tarabini-Castellani, Lorenzo; Ortega, Alberto; Gimenéz, Alvaro; Urgoiti, Eduardo; Sanchez-Arriaga, Gonzalo; Borderes-Motta, Gabriel; Lorenzini, Enrico C.; Tajmar, Martin; Wätzig, Katja; Post, Angel; Plaza, J.F. | Journal Article |
| 2020 | LTCC Embedding of SiC Power Devices for High Temperature Applications over 400 °C
Bayer, Benjamin; Groccia, Mario; Bach, Hoang Linh; Bayer, Christoph Friedrich; Schletz, Andreas; Lenz, Christian; Ziesche, Steffen | Conference Paper |
| 2020 | Magnetic characterization of ferromagnetic shape memory components under defined mechanical loading
Ehle, Fabian; Neumeister, Peter; Haufe, Eric; Neubert, Holger | Journal Article, Conference Paper |
| 2020 | Material characterization of additively manufactured metals by laser speckle photometry
Dang, David; Elspaß, Arno; Cikalova, Ulana; Kleszczynski, Stefan; Bendjus, Beatrice; Witt, Gerd | Conference Paper |
| 2020 | Matrix techniques for Lamb-wave damage imaging in metal plates
Neubeck, Robert; Kexel, Christian; Moll, Jochen | Journal Article |
| 2020 | Mechanical and microstructural characterization of LTCC and HTCC ceramics for high temperature and harsh environment application
Naumann, Falk; Lorenz, Georg; Bernasch, Michael; Boettge, Bianca; Schischka, Jan; Ziesche, Steffen; Pernau, Hans-Fridtjof; Jaegle, Martin; Klengel, Sandy; Kappert, Holger | Conference Paper |
| 2020 | Mechanochemical versus chemical routes for graphitic precursors and their performance in micropollutants removal in water
Mahmoud, Alaa El Din; Franke, Marcus; Stelter, Michael; Bräutigam, Patrick | Journal Article |
| 2020 | Messung der Verbiegung der Knochenplatte
Neubert, Holger | Book Article |
| 2020 | Methanol-to-Olefins in a membrane reactor with in situ steam removal - The decisive role of coking
Best, Felix; Mundstock, Alexander; Dräger, Gerald; Rusch, Pascal; Bigall, Nadja C.; Richter, Hannes; Caro, Jürgen | Journal Article |
| 2020 | Microstructural investigations in binderless tungsten carbide with grain growth inhibitors
Lay, Sabine; Antoni-Zdziobek, Annie; Pötschke, Johannes; Herrmann, Mathias | Journal Article |
| 2020 | Microstructure and interface characteristics of 17-4PH/YSZ components after Co-Sintering and hydrothermal corrosion
Günther, Anne; Moritz, Tassilo; Mühle, Uwe | Journal Article |
| 2020 | Microstructure and sliding wear resistance of plasma sprayed Al2O3-Cr2O3-TiO2 ternary coatings from blends of single oxides
Grimm, Maximilian; Conze, Susan; Berger, Lutz-Michael; Paczkowski, Gerd; Lindner, Thomas; Lampke, Thomas | Journal Article |
| 2020 | A mode-switchable guided elastic wave transducer
Köhler, Bernd; Kim, Jongtak; Chwelatiuk, Konrad; Tschöke, Kilian; Schubert, Frank; Schubert, Lars | Journal Article |
| 2020 | Modeling of a Novel Atmospheric SOFC/GT Hybrid Process and Comparison with State-of-the-Art SOFC System Concepts
Cardenas de la Cruz, Cesar Teodoro; Herz, Gregor; Reichelt, Erik; Jahn, Matthias | Journal Article |
| 2020 | Modification of titanium implants using biofunctional nanodiamonds for enhanced antimicrobial properties
Krok, Emilia; Balakin, Sascha; Jung, Jonas; Groß, Frank; Opitz, Jörg; Cuniberti, Gianaurelio | Journal Article |
| 2020 | Modifizierung der Faser-Matrix-Anbindung in keramischen Faserverbundwerkstoffen
Steinborn, Clemens
: Michaelis, Alexander (1. Gutachter); Krenkel, Walter (2. Gutachter) | Dissertation |
| 2020 | Multi-scale X-ray tomography and machine learning algorithms to study MoNi4 electrocatalysts anchored on MoO2 cuboids aligned on Ni foam
Topal, Emre; Liao, Zhongquan; Löffler, Markus; Gluch, Jürgen; Zhang, Jian; Feng, Xinliang; Zschech, Ehrenfried | Journal Article |
| 2020 | Multi-wire sawing of translucent alumina ceramics
Schmidtner, Lea; Heinrich, Hannes; Fuchs, Marcel; Pötzsch, Anke; Janz, Stefan; Herrmann, Mathias; Aneziris, Christos G.; Kaden, Thomas | Journal Article |
| 2020 | Multilayer ferrite inductors for the use at high temperatures
Bartsch, Heike; Thiele, Sebastian; Müller, Jens; Schabbel, Dirk; Capraro, Beate; Reimann, Timmy; Grund, Steffen; Töpfer, Jörg | Journal Article |
| 2020 | Musical pitch quantization as an eigenvalue problem
Graben, Peter beim; Mannone, Maria | Journal Article |
| 2020 | Nanoindentation to investigate IC stability using ring oscillator circuits as a CPI sensor
Schlipf, Simon; Clausner, André; Paul, Jens; Capecchi, Simone; Wambera, Laura; Meier, Karsten; Zschech, Ehrenfried | Conference Paper |
| 2020 | Novel micro-scale specimens for mode-dependent fracture testing of brittle materials: A case study on GaAs single crystals
Ast, Johannes; Schwiedrzik, Jakob; Rohbeck, Nadia; Maeder, Xavier; Michler, Johann | Journal Article |
| 2020 | Number-based characterization of microplastics
Oelschlägel, Kathrin; Benke, Annegret; Göhler, Daniel; Potthoff, Annegret; Rudolph, Andreas | Poster |
| 2020 | Numerical and experimental study of the mechanical response of diatom frustules
Topal, Emre; Rajendran, Hariskaran; Zglobicka, Izabela; Gluch, Jürgen; Liao, Zhongquan; Clausner, André; Kurzydłowski, Krzysztof Jan; Zschech, Ehrenfried | Journal Article |
| 2020 | Observation of yttrium oxide segregation in a ZrO2-SiO2 glass-ceramic at nanometer dimensions
Fu, Le; Wang, Yiren; Riekehr, Lars; Räthel, Jan; Engqvist, Håkan; Xia, Wei | Journal Article |
| 2020 | Offenzelliges Keramiknetzwerk und Verfahren zu seiner Herstellung
Füssel, Alexander; Adler, Jörg | Patent |
| 2020 | On the application of actively and passively excited guided elastic waves for the monitoring of fiber-reinforced plastics
Tschöke, Kilian; Gaul, Tobias; Pietzsch, Alexander; Schulze, Eberhard; Schubert, Lars | Journal Article |
| 2020 | Optimization of K-Cu-Mo promoted iron Fischer-Tropsch catalyst. A design-of-experiments approach
Wolke, Florian; Voigt, Markus; Medicus, M.; Reichelt, Erik; Jahn, Matthias | Poster |
| 2020 | Optimization of supported iron-based Fischer-Tropsch catalysts for higher alcohol production
Medicus, Maximilian; Merkel, Michael; Reichelt, Erik; Jahn, Matthias | Poster |
| 2020 | Oxidation behaviour of silicon carbide bonded diamond materials
Herrmann, Mathias; Adloff, Lena; Matthey, Björn; Gestrich, Tim | Journal Article |
| 2020 | Phthalocyanine-based 2D conjugated metal-organic framework nanosheets for high-performance micro-supercapacitors
Wang, Mingchao; Shi, Huanhuan; Zhang, Panpan; Liao, Zhongquan; Wang, Mao; Zhong, Haixia; Schwotzer, Friedrich; Shaygan Nia, Ali; Zschech, Ehrenfried; Zhou, Shengqian; Kaskel, Stefan; Dong, Renhao; Feng, Xinliang | Journal Article |
| 2020 | Polungsstrategien und Eigenschaftsoptimierung für integrierte piezoelektrische Keramiken
Eßlinger, Sophia
: Michaelis, Alexander | Dissertation |
| 2020 | Porous sandwich ceramic of layered silicon nitride-zirconia composite with various multilayered graphene content
Balazsi, Katalin; Furko, Monika; Liao, Zhongquan; Gluch, Jürgen; Medved, David; Sedlák, Richard; Dusza, Jan; Zschech, Ehrenfried; Balazsi, Csaba | Journal Article |
| 2020 | Pressureless sintering and properties of boron carbide composite materials
Martin, Hans-Peter; Feng, Bing; Michaelis, Alexander | Journal Article |
| 2020 | Printed miniaturized platinum heater on ultra-thin ceramic membrane for mox gas sensors
Fritsch, Marco; Mosch, Sindy; Vinnichenko, Mykola; Trofimenko, Nikolai; Kusnezoff, Mihails; Fuchs, Franz-Martin; Wissmeier, Lena; Samotaev, Nikolay; Oblov, Konstantin | Abstract |
| 2020 | Process data-based knowledge discovery in additive manufacturing of ceramic materials by multi-material jetting (CerAM MMJ)
Lang, Valentin; Weingarten, Steven; Wiemer, Hajo; Scheithauer, Uwe; Glausch, Felix; Johne, Robert; Michaelis, Alexander; Ihlenfeldt, Steffen | Journal Article |
| 2020 | Processing of Sulfide Solid Electrolytes for All-Solid-State Battery Electrodes. A Scalable Composite Cathode Manufacturing Approach
Auer, Henry; Seidel, Matthias; Heubner, Christian; Nikolowski, Kristian; Reuber, Sebastian; Wolter, Mareike | Presentation |
| 2020 | Promoted oxygen reduction kinetics on nitrogen-doped hierarchically porous carbon by engineering proton-feeding centers
Chen, Guangbo; Wang, Tao; Liu, Pan; Liao, Zhongquan; Zhong, Haixia; Wang, Gang; Zhang, Panpan; Yu, Minghao; Zschech, Ehrenfried; Chen, Mingwei; Zhang, Jian; Feng, Xinliang | Journal Article |
| 2020 | Publisher Correction: Synergistic electroreduction of carbon dioxide to carbon monoxide on bimetallic layered conjugated metal-organic frameworks
Zhong, H.; Ghorbani-Asl, M.; Ly, K.H.; Zhang, J.; Ge, J.; Wang, M.; Liao, Z.; Makarov, D.; Zschech, E.; Brunner, E.; Weidinger, I.M.; Zhang, J.; Krasheninnikov, A.V.; Kaskel, S.; Dong, R.; Feng, X. | Journal Article |
| 2020 | Pyrocatalysis - The DCF assay as a pH-robust tool to determine the oxidation capability of thermally excited pyroelectric powders
Raufeisen, Sascha; Stelter, Michael; Bräutigam, Patrick | Journal Article |
| 2020 | Pyrocatalytic oxidation - strong size-dependent poling effect on catalytic activity of pyroelectric BaTiO3 nano- and microparticles
Raufeisen, Sascha; Neumeister, Peter; Buchheim, Johannes; Stelter, Michael; Bräutigam, Patrick | Journal Article |
| 2020 | Quantitative detection of anodic oxygen evolution on solid state sintered silicon carbide under near ECM conditions
Schneider, Michael; Simunkova, Lenka; Junker, Nils; Michaelis, Alexander | Journal Article |
| 2020 | Reaktionsgefügte keramische Bauteile und Verfahren zu ihrer Herstellung
Kunze, Steffen; Adler, Jörg; Heymer, Heike | Patent |
| 2020 | Real embedding process of SiC devices in a monolithic ceramic package using LTCC technology
Lenz, Christian; Ziesche, Steffen; Schletz, Andreas; Bach, Hoang Linh; Erlbacher, Thomas | Conference Paper |
| 2020 | Recent Advances in Manufacturing Innovative Stents
Beshchasna, Natalia; Saqib, Muhammad; Kraśkiewicz, Honorata; Wasyluk, Łukasz; Kuzmin, Oleg; Duta, Oana Cristina; Ficai, Denisa; Ghizdăveţ, Zeno; Marin, Alexandru; Ficai, Anton; Sun, Zhilei; Pichugin, Vladimir F.; Opitz, Jörg; Andronescu, Ecaterina | Journal Article |
| 2020 | Reduced sintering temperatures of Li+ conductive Li1.3Al0.3Ti1.7(PO4)3 ceramics
Wätzig, Katja; Heubner, Christian; Kusnezoff, Mihails | Journal Article |
| 2020 | Relation between hardmetal properties and process temperatures during metal cutting
Vornberger, Anne; Pötschke, Johannes; Herrmann, Mathias; Picker, Tobias; Michaelis, Alexander | Conference Paper |
| 2020 | Robust development, validation and manufacturing processes for hybrid metal-composite lightweight structures
Haider, Daniel Reinhold; Gerritzen, J.; Folprecht, F.; Krahl, M.; Spitzer, S.; Gude, M.; Hillmann, S.; Köhler, B.; Kopycinska-Müller, M.; Schulze, M.; Heuer, H.; Opitz, Jörg | Conference Paper |
| 2020 | The role of balancing nanostructured silicon anodes and NMC cathodes in lithium-ion full-cells with high volumetric energy density
Baasner, Anne; Reuter, Florian; Seidel, Matthias; Krause, Andreas; Pflug, Erik; Härtel, Paul; Dörfler, Susanne; Abendroth, Thomas; Althues, Holger; Kaskel, Stefan | Journal Article |
| 2020 | Scalable fabrication of gold nanoparticles with adjustable size distribution as catalytic nuclei for the CVD growth of silicon nanowires
Langklotz, Ulrike; Lein, Tobias; Schulze, Claudia; Weiser, Mathias; Krause, Andreas; Michaelis, Alexander | Journal Article |
| 2020 | Schichtperowskittemplate für die Texturierung von bleifreien KNN-Keramiken
Briegel, Christoph
: Michaelis, Alexander | Dissertation |
| 2020 | Selektive Synthese von höheren Alkoholen an eisenbasierten Katalysatoren
Schaller, Max Rudolf
: Michaelis, Alexander (Gutachter); Turek, Thomas (Gutachter); Jahn, Matthias (Gutachter) | Dissertation |
| 2020 | Simulating permeabilities based on 3D image data of a layered nano-porous membrane
Prill, Torben; Redenbach, Claudia; Roldan, Diego; Godehardt, Michael; Schladitz, Katja; Höhn, Sören; Sempf, Kerstin | Journal Article |
| 2020 | Simulationsbasierte Optimierung eines Messstandes zur optischen Vermessung von thermo-mechanischen Verformungen
Schwerz, Robert; Röllig, Mike | Conference Paper |
| 2020 | Simulationsgestützte Analyse von Through-hole Technology Verbindungsstellen der Elektronik im Automobilbereich
Berger, R.; Olfe, Jürgen; Rogowski, Sebastian; Röllig, Mike; Münch, Stefan; Schwerz, Robert; Heuer, Henning | Conference Paper |
| 2020 | A sodium polysulfide battery with liquid/solid electrolyte: Improving sulfur utilization using P2S5 as additive and tetramethylurea as catholyte solvent
Medenbach, Lukas; Hartmann, Pascal; Janek, Jürgen; Stettner, Timo; Balducci, Andrea; Dirksen, Cornelius; Schulz, Martin; Stelter, Michael; Adelhelm, Philipp | Journal Article |
| 2020 | SOEC a key for power-to-x processes
Megel, Stefan; Jahn, Matthias | Presentation |
| 2020 | Sonochemical coating: Effect of energy input and distance on the functionalization of textiles with TiO2 and ZnO-Nanoparticles
Weiße, Maik; Schmidt, C.; Abramova, Anna V.; Voitov, Yuri; Stelter, Michael; Bräutigam, Patrick | Journal Article |
| 2020 | The sorption behaviour of amine micropollutants on polyethylene microplastics - impact of aging and interactions with green seaweed
Vockenberg, Thorben; Wichard, Thomas; Ueberschaar, Nico; Franke, Marcus; Stelter, Michael; Bräutigam, Patrick | Journal Article |
| 2020 | Sources of parasitic features in the visible range of oxide transparent ceramics absorption spectra
Goldstein, Adrian; Katz, Michael; Boulesteix, Rémy; Shames, Alexander; Coureau, Christope; Räthel, Jan; Mateos-Ferre, Xavier; Loiko, Pavel | Journal Article |
| 2020 | Stress-induced transistor degradation studied by an indentation approach
Schlipf, Simon; Clausner, André; Paul, Jens; Capecchi, Simone; Wambera, Laura; Meier, Karsten; Zschech, Ehrenfried | Journal Article |
| 2020 | Study of structure and properties of Fe-based amorphous ribbons after pulsed laser interference heating
Czyz, Olaf; Kusinski, Jan; Radziszewska, Agnieszka; Liao, Zhongquan; Zschech, Ehrenfried; Kac, Malgorzata; Ostrowski, Roman | Journal Article |
| 2020 | Sustainable industrial wastewater reuse using ceramic nanofiltration: Results from two pilot projects in the oil and gas and the ceramics industries
Beery, Martan; Pflieger, Christian; Weyd, Marcus | Journal Article |
| 2020 | Synergistic electroreduction of carbon dioxide to carbon monoxide on bimetallic layered conjugated metal-organic frameworks
Zhong, Haixia; Ghorbani-Asl, Mahdi; Ly, Khoa Hoang; Zhang, Jichao; Ge, Jin; Wang, Mingchao; Liao, Zhongquan; Makarov, Denys; Zschech, Ehrenfried; Brunner, Eike; Weidinger, Inez M.; Zhang, Jian; Krasheninnikov, Arkady V.; Kaskel, Stefan; Dong, Renhao; Feng, Xinliang | Journal Article |
| 2020 | Synthesis and sintering of Li1.3Al0.3Ti1.7(PO4)3 (LATP) electrolyte for ceramics with improved Li+ conductivity
Wätzig, Katja; Rost, Axel; Heubner, Christian; Coeler, Matthias; Nikolowski, Kristian; Wolter, Mareike; Schilm, Jochen | Journal Article |
| 2020 | Systematic investigation about the influence of two-step sintering on microstructure properties of ZTA ceramics
Tschirpke, Caroline; Reichel, Uwe; Begand, Sabine; Simon, Kerstin | Journal Article |
| 2020 | Thick film paste systems for multifunctional copper power modules
Reinhardt, Kathrin; Körner, Stefan; Partsch, Uwe | Conference Paper |
| 2020 | Towards a wastewater energy recovery system: The utilization of humidified ammonia by a solid oxide fuel cell stack
Stoeckl, Bernhard; Preininger, Michael; Subotić, Vanja; Megel, Stefan; Folgner, Christoph; Hochenauer, Christoph | Journal Article |
| 2020 | Transparent Ceramics
Goldstein, Adrian; Krell, Andreas; Burshstein, Zeev | Book |
| 2020 | Treatment with bisphosphonates to mitigate calcification of elastin-containing bioprosthetic materials
Zhuravleva, Irina Y.; Polienko, Yuliya F.; Karpova, Elena V.; Timchenko, Tatyana P; Vasilieva, Maria B.; Baratova, Ludmila A.; Shatskaya, Svetlana S.; Kuznetsova, Elena V.; Nichay, Nataliya R.; Beshchasna, Natalia; Bogachev-Prokophiev, Alexander V. | Journal Article |
| 2020 | Two-Dimensional boronate ester covalent organic framework thin films with large single crystalline domains for neuromorphic memory device
Park, Sang Wook; Liao, Zhongquan; Ibarlucea, Bergoi; Qi, Haoyuan; Lin, Hung-Hsuan; Becker, Daniel; Melidonie, Jason; Zhang, Tao; Sahabudeen, Hafeesudeen; Baraban, Larysa; Baek, Chang-Ki; Zheng, Zhikun; Zschech, Ehrenfried; Fery, Andreas; Heine, Thomas; Kaiser, Ute; Cuniberti, Gianaurelio; Dong, Renhao; Feng, Xinliang | Journal Article |
| 2020 | Two‐Dimensional Boronate Ester Covalent Organic Framework Thin Films with Large Single Crystalline Domains for a Neuromorphic Memory Device
Park, S.; Liao, Z.; Ibarlucea, B.; Qi, H.; Lin, H.-H.; Becker, D.; Melidonie, J.; Zhang, T.; Sahabudeen, H.; Baraban, L.; Baek, C.-K.; Zheng, Z.; Zschech, E.; Fery, A.; Heine, T.; Kaiser, U.; Cuniberti, G.; Dong, R.; Feng, X. | Journal Article |
| 2020 | Untersuchungen zum Einfluss von Signalgrößen auf Prozesscharakteristika beim Pulsanodisieren von Aluminium
Lämmel, Christoph
: Michaelis, Alexander | Dissertation |
| 2020 | Utilizing acoustic emission signals to evaluate BEoL stack damages of two different sample systems caused by Cu-pillar shear-off
Silomon, Jendrik; Clausner, André; Zschech, Ehrenfried | Conference Paper |
| 2020 | Verfahren zur Herstellung von individuell gekennzeichneten Bauteilen
Scheithauer, Uwe; Weingarten, Steven; Johne, Robert; Müller-Wittig, Wolfgang | Patent |
| 2020 | Weiterentwicklung von Schichten aus dem System Al2O3-TiO2
Conze, Susan; Berger, Lutz-Michael; Richter, Alexei; Vaßen, Robert | Journal Article |
| 2020 | Werkzeugintegrierte Sensorik zur Onlineüberwachung von Fräsprozessen
Ettrichrätz, Martin; Gebhardt, Sylvia | Journal Article |
| 2020 | Wet chemical deposition of BN, SiC and Si3N4 interphases on SiC fibers
Nöth, Andreas; Maier, Jonathan; Schönfeld, Katrin; Klemm, Hagen | Journal Article |
| 2020 | Zinc-Mediated template synthesis of Fe-N-C electrocatalysts with densely accessible Fe-Nx active sites for efficient oxygen reduction
Chen, Guangbo; Liu, Pan; Liao, Zhongquan; Sun, Fanfei; He, Yanghua; Zhong, Haixia; Zhang, Tao; Zschech, Ehrenfried; Chen, Mingwei; Wu, Gang; Zhang, Jian; Feng, Xinliang | Journal Article |
| 2019 | 3D Diatom-Designed and selective laser melting (SLM) manufactured metallic structures
Zglobicka, Izabela; Chmielewska, Agnieszka; Topal, Emre; Kutukova, Kristina; Gluch, Jürgen; Krüger, Peter; Kilroy, Cathy; Święszkowski, Wojciech; Kurzydłowski, Krzysztof Jan; Zschech, Ehrenfried | Journal Article |
| 2019 | 3D-customized thin-walled ceramic mouldings produced by deep drawing of green tapes
Schwarzer, Eric; Olawsky, Lukas; Hagen, Florian; Scheithauer, Uwe; Moritz, Tassilo; Richter, Hans-Jürgen; Michaelis, Alexander | Journal Article |
| 2019 | Additive manufacturing of ceramic components
Scheithauer, Uwe; Richter, Jürgen | Book Article |
| 2019 | Additive manufacturing of functionalized glass components
Schilm, Jochen; Moritz, Tassilo; Wagner, Dörte; Schwarzer, Eric; Weingarten, Steven; Wätzig, Katja | Journal Article |
| 2019 | Additive Manufacturing of Functionally Graded Ceramic Materials by Stereolithography
Gonzales, Pablo; Schwarzer, Eric; Scheithauer, Uwe; Kooijmans, Norbertus; Moritz, Tassilo | Journal Article |
| 2019 | Alternative process routes to manufacture porous ceramics - Opportunities and challenges
Scheithauer, Uwe; Kerber, Florian; Füssel, Alexander; Holtzhausen, Stefan; Beckert, Wieland; Schwarzer, Eric; Weingarten, Steven; Michaelis, Alexander | Journal Article |
| 2019 | Ammonia as promising fuel for solid oxide fuel cells: Experimental analysis and performance evaluation
Stoeckl, Bernhard; Preininger, Michael; Subotić, Vanja; Schroettner, Hartmuth; Sommersacher, Peter; Seidl, Michael; Megel, Stefan; Hochenauer, Christoph | Conference Paper |
| 2019 | Analysis of flip-chip solder joints under isothermal vibration loading
Meier, Karsten; Leslie, David; Dasgupta, Abhijit; Röllig, Mike; Bock, Karlheinz | Conference Paper |
| 2019 | Anodic dissolution of chromium at high current densities in sodium nitrate electrolyte
Schneider, Michael; Simunkova, Lenka; Manko, Michal; Lohrengel, M.M.; Hoogsteen, W. | Journal Article |
| 2019 | Anodizing - interplay between bath aging and oxide formation and properties
Schneider, Michael; Kremmer, Kerstin; Gierth, Uta | Journal Article |
| 2019 | Anordnung und Verfahren zur Prüfung sensitiver Elemente oder elektrochemischer Zellen
Kusnezoff, Mihails; Trofimenko, Nikolai; Sauchuk, Viktar | Patent |
| 2019 | Anpassung des EFIT-Algorithmus zur Anwendung rechnergestützter POD-Methoden im SHM-Bereich
Tschöke, Kilian
: Matthies, Gunar (1. Gutachter); Wensch, Jörg (2. Gutachter); Mueller, Inka (3. Gutachter); Schubert, Lars (Betreuer) | Dissertation |
| 2019 | Application of µCT for the determination of total surface area of stents
Saqib, Muhammad; Bernhardt, Ricardo; Kästner, Markus; Beshchasna, Natalia; Cuniberti, Gianaurelio; Opitz, Jörg | Conference Paper |
| 2019 | Application of empirical hardness models on hardmetals with alternative binders
Vornberger, Anne; Pötschke, Johannes; Mayer, Markus; Michaelis, Alexander | Conference Paper |
| 2019 | Automatisierung der zerstörungsfreien Prüfung von großen Stahlgussbauteilen
Heuer, Henning | Journal Article |
| 2019 | An autonomous flame ionization detector for emission monitoring
Förster, Jan; Kuipers, Winfred J.; Lenz, Christian; Ziesche, Steffen; Bechtold, Franz | Journal Article |
| 2019 | Bauteil, das mit ß-Siliciumnitridwerkstoff gebildet ist und ein Verfahren zu seiner Herstellung
Fuchs, Marcel; Herrmann, Mathias; Kaden, Thomas; Wolfrum, Anne-Kathrin | Patent |
| 2019 | Bewertung der Zuverlässigkeit von keramischen Federn für korrosive Umgebungen und hohe Temperaturen
Koplin, C.; Kailer, A.; Stockmann, J.; Beckert, W. | Report |
| 2019 | BN-based fiber coatings by wet-chemical coating
Maier, Jonathan; Nöth, Andreas; Schönfeld, Katrin | Conference Paper |
| 2019 | Boron-doped diamond with improved oxidation resistance
Herrmann, Mathias; Matthey, Björn; Gestrich, Tim | Journal Article |
| 2019 | Brazes for extremely high temperatures
Martin, Hans-Peter; Roszeitis, Sven; Matthey, Björn; Herrmann, Marion; Graffé, Marius; Lippmann, Wolfgang; Schmidt, Marcus Peter; Burkhardt, Ulrich; Michaelis, Alexander | Conference Paper |
| 2019 | Bremseinrichtung für ein Zweirad
Neubert, Holger; Neumeister, Peter | Patent |
| 2019 | Carbon membranes for bio gas upgrading
Richter, Hannes; Reger-Wagner, Norman; Kämnitz, Susanne; Voigt, Ingolf; Lubenau, Udo; Mothes, Raymond | Journal Article |
| 2019 | Ceramic additive manufacturing methods applied to sintered glass components with novel properties
Moritz, Tassilo; Schilm, Jochen; Rost, Axel; Schwarzer, Eric; Weingarten, Steven; Scheithauer, Uwe; Wätzig, Katja; Wagner, Dörte; Michaelis, Alexander | Journal Article |
| 2019 | Chabazite-type zeolite membranes for effective CO2 separation: The role of hydrophobicity and defect structure
Lee, Minseong; Hong, Sungwon; Kim, Dongjae; Kim, Eunjoo; Lim, Kyunghwan; Jung, Jaechil; Richter, Hannes; Moon, Jongho; Choi, Nakwon; Nam, Jaewook; Choi, Jungkyu | Journal Article |
| 2019 | Characterisation of transition metal doped Li+-stabilized Na-beta''-alumina electrolytes
Dirksen, Cornelius; Augustina, Anisa Isabella; Schulz, Matthias; Stelter, Michael | Abstract |
| 2019 | Cleaving silicene-terminated calcium disilicide in the transmission electron microscope
Liao, Zhongquan; Standke, Yvonne; Gluch, Jürgen; Brazda, Petr; Kopecek, Jaromir; Klementova, Mariana; Palatinus, Lukas; Zschech, Ehrenfried | Journal Article |
| 2019 | Co-Electrolysis CFY-Stack Operation and Integration for Carbon Capture and Utilization
Kusnezoff, Mihails; Megel, Stefan; Rix, Christopher; Adam, Paul; Reichelt, Erik; Herz, Gregor; Jahn, Matthias; Trofimenko, Nikolai; Michaelis, Alexander | Conference Paper |
| 2019 | The combination of minimally invasive electrochemical investigations and FTIR-spectroscopy to analyze atmospheric corrosion product layers on zinc
Langklotz, Ulrike; Babutzka, Martin; Schneider, Michael; Burkert, Andreas | Journal Article |
| 2019 | Combined wear and ageing of ceramic-on-ceramic bearings in total hip replacement under edge loading conditions
Al-Hajjar, Mazen; Grémillard, Laurent; Begand, Sabine; Oberbach, Thomas; Hans, Karen; Delfosse, Daniel; Chêvalier, Jérôme; Jennings, Louise M. | Journal Article |
| 2019 | Comparison of electrochemical degradation for spray dried and pulse gas dried LiNi0.5Mn1.5O4
Seidel, Matthias; Kugaraj, Muthuraman; Nikolowski, Kristian; Wolter, Mareike; Kinski, Isabel; Jähnert, Thomas; Michaelis, Alexander | Journal Article |
| 2019 | Comparison of Nickel and Cobalt Bonded Nanoscaled Hardmetals
Fabijanić, Tamara Aleksandrov; Pötschke, Johannes; Mayer, Markus; Škrinjarić, Irbas; Kurtela, Marin | Conference Paper |
| 2019 | A comprehensive study on improved power materials for high-temperature thermoelectric generators
Bittner, Michael; Kanas, Nikola; Hinterding, Richard; Steinbach, Frank; Räthel, Jan; Schrade, Matthias; Wiik, Kjell; Einarsrud, Mari-Ann; Feldhoff, Armin | Journal Article |
| 2019 | Corrigendum: Iron-Based Fischer-Tropsch Catalysts for Higher Alcohol Synthesis (Chemie Ingenieur Technik, (2018), 90, 5, (713-720), 10.1002/cite.201700154)
Schaller, Max Rudolf; Reichelt, Erik; Jahn, Matthias | Journal Article |
| 2019 | Corrosion behavior of anodized AA-6060 depending on the anodizing bath aging
Schneider, Michael; Kremmer, Kerstin | Journal Article |
| 2019 | Current Induced Barkhausen Noise Technique
Birkefeld, Claudius; Hillmann, Susanne; Cikalova, Ulana; Funke, Hendrik | Poster |
| 2019 | Degradation von metallischen Kontaktierungskomponenten bei Hochtemperatur-Brennstoffzellen
Folgner, Christoph
: Michaelis, Alexander (Gutachter); Leyens, Christoph (Gutachter); Kusnezoff, Mihails (Betreuer) | Dissertation |
| 2019 | Determining fundamental properties from diffraction: Electric field induced strain and piezoelectric coefficient
Hinterstein, Manuel; Lee, Kai-Yang; Eßlinger, Sophia; Glaum, Julia; Studer, Andrew; Hoffman, Mark; Hoffmann, Michael Johannes | Journal Article |
| 2019 | Development of 40 MHz Ultrasonic Transducers via Soft Mold Process
Günther, Paul; Neumeister, Peter; Neubert, Holger; Gebhardt, Sylvia | Journal Article |
| 2019 | Development of a 20 MHz annular-array - a balancing act between optimized design and technological opportunities
Juhrig, Andre; Schmidt, Ulrike; Wolf, Mario; Kühnicke, Elfgard; Günther, Paul A.; Gebhardt, Sylvia | Conference Paper |
| 2019 | Development of a visual inspection system and the corresponding algorithm for the detection and subsequent classification of paint defects on car bodies in the automotive industry
Kieselbach, Kim Katharina; Nöthen, Matthias; Heuer, Henning | Journal Article |
| 2019 | Development of the local proton concentration during pulse anodizing
Lämmel, Christoph; Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2019 | Editorial for the Special Issue "Characterization of Nanomaterials: Selected Papers from 6th Dresden Nanoanalysis Symposium"
Zschech, Ehrenfried; Sinclair, Robert; Martins, Rodrigo; Sebastiani, Marco; Sartori, Sabrina | Journal Article, Conference Paper |
| 2019 | Effect of electric load and dual atmosphere on the properties of an alkali containing diopside-based glass sealant for solid oxide cells
Sabato, A.G.; Rost, Axel; Schilm, Jochen; Kusnezoff, Mihails; Salvo, Milena; Chrysanthou, Andreas; Smeacetto, Federico | Journal Article |
| 2019 | The effect of Fe as constituent in Ni-base alloys on the oxygen evolution reaction in alkaline solutions at high current densities
Rauscher, Thomas; Bernäcker, Christian Immanuel; Mühle, Uwe; Kieback, Bernd F.; Röntzsch, Lars | Journal Article |
| 2019 | Effect of processing on high-velocity water vapor recession behavior of Yb-silicate environmental barrier coatings
Bakan, Emine; Sohn, Yoo Jung; Kunz, Willy; Klemm, Hagen; Vaßen, Robert | Journal Article |
| 2019 | Effects of TiO2 doping on Li+-stabilized Na-β"-alumina for energy storage applications
Dirksen, Cornelius; Skadell, Karl; Schulz, Matthias; Stelter, Michael | Journal Article |
| 2019 | Einfluss der Herstellungsbedingungen auf die mechanische Stabilität asymmetrischer BSCF-Membranen für die Sauerstoff-Bereitstellung
Hoffmann, Robert
: Rettenmayr, Markus (Gutachter); Meulenberg, Wilhelm Albert (Gutachter); Caro, Jürgen | Dissertation |
| 2019 | Electrodeposited manganese oxide on superhydrophobic nickel-mesh for application in gas diffusion electrode
Bekisch, Artur; Skadell, Karl; Schulz, Matthias; Stelter, Michael | Abstract |
| 2019 | Emergence and Impact of Al2TiO5 in Al2O3-TiO2 APS Coatings
Richter, Alexei; Berger, Lutz-Michael; Conze, Susan; Sohn, Yoo Jung; Vaßen, Robert | Conference Paper |
| 2019 | Engineering crystalline quasi-two-dimensional polyaniline thin film with enhanced electrical and chemiresistive sensing performances
Zhang, Tao; Qi, Haoyuan; Liao, Zhongquan; Horev, Yehu David; Panes-Ruiz, Luis Antonio; Petkov, Petko S.; Zhang, Zhe; Shivhare, Rishi Ramdas; Zhang, Panpan; Liu, Kejun; Bezugly, Viktor; Liu, Shaohua; Zheng, Zhikun; Mannsfeld, Stefan C.B.; Heine, Thomas; Cuniberti, Gianaurelio; Haick, Hossam; Zschech, Ehrenfried; Kaiser, Ute; Dong, Renhao; Feng, Xinliang | Journal Article |
| 2019 | Enhanced performance stability of iridium oxide-based pH sensors fabricated on rough inkjet-printed platinum
Zea, Miguel; Moya, Ana; Fritsch, Marco; Ramon, Eloi; Villa, Rosa; Gabriel, Gemma | Journal Article |
| 2019 | Enhancement of sensitivity to delamination in eddy current testing of carbon fiber composites by varying probe geometry
Mizukami, Koichi; Ibrahim, Ahmad Syukri Bin; Ogi, Keiji; Matvieieva, Nataliia; Kharabet, Ievgen I.; Schulze, Martin; Heuer, Henning | Journal Article |
| 2019 | Entwicklung keramischer Perowskit-Werkstoffe und Bauelementstrukturen für elektrokalorische Anwendungen
Molin, Christian
: Michaelis, Alexander (Gutachter); Gerlach, Gerald (Gutachter); Gebhardt, Sylvia (Betreuer) | Dissertation |
| 2019 | Entwicklung selbstheilender Materialien zum Korrosionsschutz für Keramiken in Hochtemperaturanwendungen
Kunz, Willy
: Michaelis, Alexander (Gutachter); Vaßen, Robert (Gutachter) | Dissertation |
| 2019 | Erkennung von Krebszellen in Prostata-Biopsien durch die zeitaufgelöste Fluoreszenz-Spektroskopie
Lehmann, Andreas; Schreiber, Luise; Gerich, Carola; Schreiber, Jürgen; Opitz, Jörg | Poster |
| 2019 | Evaluation of a method for micro-defect sealing in ZSM-5 zeolite membranes by chemical vapor deposition of carbon
Simon, Adrian; Richter, Hannes; Reif, Benjamin; Schülein, Marion; Sanwald, Dirk; Schwieger, Wilhelm | Journal Article |
| 2019 | Evidence for the AlZn-Oi defect-complex model for magnetron-sputtered aluminum-doped zinc oxide: A combined X-ray absorption near edge spectroscopy, X-ray diffraction and electronic transport study
Bikowski, André; Zajac, Dariusz A.; Vinnichenko, Mykola; Ellmer, Klaus | Journal Article |
| 2019 | Experimental and numerical evaluation of a small array of ceramic foam volumetric absorbers
Zaversky, Fritz; Aldaz, Leticia; Sánchez, Marcelino A.D.; Fernández-Reche, Jesús; Füssel, Alexander; Adler, Jörg | Conference Paper |
| 2019 | An experimental and numerical survey into the potential of hybrid foams
Hohe, Jörg; Beckmann, Carla; Böhme, Wolfgang; Weise, Jörg; Reinfried, Matthias; Luthardt, Fabian; Rapp, Florian; Diemert, Jan | Journal Article |
| 2019 | Fast fuel variation and identification of SOFC system changes using online health monitoring tools and fault diagnosis
Subotić, Vanja; Harter, Philipp; Stoeckl, Bernhard; Preininger, Michael; Kusnezoff, Mihails; Lawlor, Vincent; Pofahl, Stefan; Napporn, Teko; Megel, Stefan; Schroettner, Hartmuth; Hochenauer, Christoph | Conference Paper |
| 2019 | Fast response hydrogel-based plasmonic sensor substrate for the detection of ethanol
Kroh, Christoph; Wuchrer, Roland; Steinke, Nadja; Günther, Margarita; Gerlach, Gerald; Härtling, Thomas | Conference Paper |
| 2019 | Fertigungstechnologien für Ultraschallwandler im Frequenzbereich zwischen 40 kHz und 40 MHz
Gebhardt, Sylvia; Günther, Paul; Hohlfeld, Kai; Neubert, Holger | Journal Article |
| 2019 | Fraunhofer Institute for Ceramic Technologies and Systems. Annual Report 2018/2019
| Annual Report |
| 2019 | Fraunhofer-Institut für Keramische Technologien und Systeme. Jahresbericht 2018/2019
| Annual Report |
| 2019 | Fully printed zinc oxide electrolyte-gated transistors on paper
Carvalho, José Tiago; Dubceac, Viorel; Grey, Paul; Cunha, Ines; Fortunato, Elvira; Martins, Rodrigo; Clausner, André; Zschech, Ehrenfried; Pereira, Luis | Journal Article |
| 2019 | Functional integration approaches via laser powder bed processing
Moritz, Juliane; Seidel, André; Braun, Bernard; Brandão, Ana D.; Pambaguian, Laurent; Köhler, Bernd; Barth, Martin; Riede, Mirko; Lopez, Elena; Brückner, Frank; Leyens, Christoph | Journal Article |
| 2019 | Functional Printing of MMIC-Interconnects on LTCC Packages for sub-THz applications
Ihle, Martin; Ziesche, Steffen; Zech, Christian; Baumann, Benjamin | Conference Paper |
| 2019 | Funktionale Schichten für gassensorische Anwendungen
Dietrich, Stefan
: Michaelis, Alexander (1. Gutachter); Guth, Ulrich (2. Gutachter) | Dissertation |
| 2019 | Fused Filament Fabrication (FFF) of Metal-Ceramic Components
Abel, Johannes; Scheithauer, Uwe; Janics, Thomas; Hampel, Stefan; Cano, Santiago; Müller-Köhn, Axel; Günther, Anne; Kukla, Christian; Moritz, Tassilo | Journal Article |
| 2019 | Future AM. Die nächste Generation additiver Fertigungsverfahren
Schleifenbaum, Johannes Henrich; Tenbrock, C.; Emmelmann, Claus; Leyens, Christoph; Brückner, Frank; Michaelis, Alexander | Book Article |
| 2019 | Gewebecharakterisierung mittels fraktalem Fluoreszenzabklingverhalten und optischer Kohärenztomografie
Schreiber, Luise; Lehmann, Andreas; Schreiber, Jürgen; Opitz, Jörg | Poster |
| 2019 | Herstellung von amorphen SiCN-Verbundbauteilen über die spritzgusstechnische Verarbeitung von kohlenstoffkurzfaserverstärkten Polysilazanen
Müller-Köhn, Axel
: Michaelis, Alexander (1. Gutachter); Koch, Dietmar (2. Gutachter) | Dissertation |
| 2019 | High-performance ultrasonic transducers based on PMN-PT single crystals fabricated in 1-3 Piezo-Composite Technology
Herzog, Thomas; Walter, Susan; Lee, Sang-Goo; Lee, Jeong-Ho; Schubert, Frank; Heuer, Henning | Journal Article, Conference Paper |
| 2019 | High-Temperature packaging for sensors
Rebenklau, Lars; Gierth, Paul; Barth, Henry | Conference Paper |
| 2019 | How to measure flexibility - performance indicators for demand driven power generation from biogas plants
Dotzauer, Martin; Pfeiffer, Diana; Lauer, Markus; Pohl, Marcel; Mauky, Eric; Bär, Katharina; Sonnleitner, Matthias; Zörner, Wilfried; Hudde, Jessica; Schwarz, Björn; Faßauer, Burkhardt; Dahmen, Markus; Rieke, Christian; Herbert, Johannes; Thrän, Daniela | Journal Article |
| 2019 | HTCC-Multilayerbasierte Ionensensitive Sensoren für die Wasseranalyse
Feller, Claudia; Partsch, Uwe; Körner, Stefan | Conference Paper |
| 2019 | Hydrogel-based plasmonic sensor substrate for the detection of ethanol
Kroh, Christoph; Wuchrer, Roland; Steinke, Nadja; Günther, Margarita; Gerlach, Gerald; Härtling, Thomas | Journal Article |
| 2019 | Immobilization of detonation nanodiamonds on macroscopic surfaces
Balakin, Sascha; Dennison, Nicholas R.; Klemmed, Benjamin; Spohn, Juliane; Cuniberti, Gianaurelio; Römhildt, Lotta; Opitz, Jörg | Journal Article |
| 2019 | Impact of Al2O3-40 wt.% TiO2 Feedstock Powder Characteristics on the Sprayability, Microstructure and Mechanical Properties of Plasma Sprayed Coatings
Richter, Alexei; Berger, Lutz-Michael; Sohn, Yoo Jung; Conze, Susan; Sempf, Kerstin; Vaßen, Robert | Journal Article |
| 2019 | Impact of extrusion parameters on the mechanical performance of tubular BSCF-supports for asymmetric oxygen transporting membranes
Hoffmann, Robert; Pippardt, Ute; Kriegel, Ralf | Journal Article |
| 2019 | Impact of mechanical strain on 22 nm FDSOI device performance using nanoindentation
Schlipf, Simon; Clausner, André; Paul, Jens; Capecchi, Simone; Kurz, G.; Zschech, Ehrenfried | Conference Paper |
| 2019 | Impact of sintering temperature on permeation and long-term development of support structure and stability for asymmetric oxygen transporting BSCF membranes
Hoffmann, Robert; Pippardt, Ute; Kriegel, Ralf | Journal Article |
| 2019 | Improved SH0 Guided Wave Transducers Based on Piezoelectric Fiber Patches
Kim, Yongtak; Gaul, Tobias; Köhler, Bernd | Journal Article |
| 2019 | In situ neutron diffraction studies on poling of the hard PZT ceramic PIC181
Eßlinger, Sophia; Neumeister, Peter; Schönecker, Andreas; Hoffman, Mark John; Studer, Andrew; Hinterstein, Manuel | Journal Article |
| 2019 | In-situ processing and characterization of Fe-TiCN composite produced via enhanced carbonitrothermic reduction of low grade ilmenite concentrate
Mojisola, Tajudeen; Ramakokovhu, Munyadziwa Mercy; Räthel, Jan; Olubambi, Peter Apata; Matizamhuka, Wallace R. | Journal Article |
| 2019 | In-situ synthesis and characterization of Fe – TiC based cermet produced from enhanced carbothermally reduced ilmenite
Mojisola, Tajudeen; Ramakokovhu, Mercy Munyadziwa; Räthel, Jan; Olubambi, Peter Apata; Matizamhuka, Wallace R. | Journal Article |
| 2019 | Influence of ceramic granule properties on die filling behaviour
Glöß, Bianca; Fries, Manfred | Journal Article |
| 2019 | Influence of microstructure on hardness and thermal conductivity of hardmetals
Vornberger, Anne; Pötschke, Johannes; Gestrich, Tim; Herrmann, Mathias | Presentation |
| 2019 | An insight into anodic dissolution processes of carbides obtained by product analysis
Simunkova, Lenka; Schneider, Michael; Michaelis, Alexander | Conference Paper |
| 2019 | Integration of piezoceramic composites into structural components: Effect on the polarisation state and polarisability
Hohlfeld, Kai; Eßlinger, Sophia; Eydam, Agnes; Winkler, Anja; Weber, Tony; Gude, Maik; Modler, Niels; Gerlach, Gerald; Suchaneck, Gunnar; Michaelis, Alexander; Schönecker, Andreas; Gebhardt, Andreas; Neumeister, Peter | Journal Article |
| 2019 | Integration of sensory-diagnostic and actuator therapeutic functions in implants
Lausch, Holger; Töppel, Thomas | Book Article |
| 2019 | Interaction of fiber matrix bonding in SiC/SiC ceramic matrix composites
Schönfeld, Katrin; Klemm, Hagen | Journal Article |
| 2019 | Investigation and optimization of Ni/NaCl granules for Na-NiCl2 high temperature batteries
Schüßler, Benjamin; Dirksen, Cornelius; Schulz, Matthias; Stelter, Michael | Abstract |
| 2019 | Investigation of the oxide film formed on solid-state sintered silicon carbide ceramics at high anodic potentials
Schneider, Michael; Simunkova, Lenka; Michaelis, Alexander; Noeske, Michael; Aniol, Jonas; Thiel, Karsten | Conference Paper |
| 2019 | Investigations on the effective electric loads in blended insertion electrodes for lithium-ion batteries
Liebmann, Tobias; Heubner, Christian; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2019 | Investigations on the reversible heat generation rates of blended Li-insertion electrodes
Liebmann, Tobias; Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2019 | Joining and mechanical testing of oxide/oxide (Nextel™ 610/alumina-zirconia) ceramic composites
Akram, Muhammad Yasir; Casalegno, Valentina; Ferraris, Monica; Puchas, Georg; Krenkel, Walter; Roszeitis, Sven | Journal Article |
| 2019 | Keramische Membranen in der Membrandestillation
Schnittger, Johann; Weyd, Marcus W.; Voigt, Ingolf; Lerch, André | Journal Article |
| 2019 | Keramische Multilagenspulen zur Anwendung in der Hochtemperaturelektronik
Bartsch, Heike; Müller, Jens; Capraro, Beate; Schabbel, Dirk; Reimann, Timmy; Töpfer, Jörg; Grund, Steffen | Conference Paper |
| 2019 | Kompakte Abfrageeinheit auf Basis einer Doppelphotodiode für die spektraloptische Sensorik
Wuchrer, Roland
: Härtling, Thomas (Betreuer); Gerlach, Gerald (Betreuer, Hrsg.) | Dissertation |
| 2019 | Laser speckle photometry - Optical sensor systems for condition and process monitoring
Chen, Lili; Cikalova, Ulana; Bendjus, Beatrice; Gommlich, Andreas; Sudip, Shohag Roy; Schott, Carolin; Steingroewer, Juliane; Belting, Matthias; Kleszczynski, Stefan | Journal Article |
| 2019 | Lattice Analysis by Synchrotron Powder Diffraction on High Voltage Spinel LiNi0.5Mn1.5O4
Seidel, Matthias; Nikolowski, Kristian; Auer, Henry; Kinski, Isabel; Wolter, Mareike; Mikhailova, Daria; Maletti, Sebastian; Michaelis, Alexander | Abstract |
| 2019 | Lattice Analysis by Synchrotron Powder Diffraction on High Voltage Spinel LNMO
Seidel, Matthias; Nikolowski, Kristian; Auer, Henry; Kinski, Isabel; Wolter, Mareike; Mikhailova, Daria; Maletti, Sebastian; Michaelis, Alexander | Poster |
| 2019 | LLZO separator sheets manufactured by a tape casting process and their electrochemical characterization
Hüttl, Juliane; Arnold, Michael; Nikolowski, Kristian; Görne, Arno Ludwig; Wolter, Mareike; Michaelis, Alexander | Poster |
| 2019 | Messsensor zum Bestimmen von Eigenspannungen an oder in einem zu untersuchenden Bauteil
Brosius, David Maximilian; Cikalova, Ulana; Funke, Hendrik; Hillmann, Susanne | Patent |
| 2019 | Methode für den Vorhalt von inhomogenen Schwindungen im Entwurfsprozess von LTCC-Mikrosystemen
Lenz, Christian; Strach, Nicole; Ziesche, Steffen; Partsch, Uwe; Michaelis, Alexander | Conference Paper |
| 2019 | Methodology for correlation of porosity and mechanical properties of silver sintered joints in electronics
Metasch, René; Röllig, Mike; Knoch, Philip; Weinmann, Christian; Meier, Karsten | Conference Paper |
| 2019 | Microstructural control of a SSZ-13 zeolite film via rapid thermal processing
Kim, Jinseong; Jang, Eunhee; Hong, Sungwon; Kim, Dongjae; Kim, Eunjoo; Richter, Hannes; Simon, Adrian; Choi, Nakwon; Korelskiy, Danil; Fouladvand, Shahpar; Nam, Jaewook; Choi, Jungkyu | Journal Article |
| 2019 | Miniaturisiertes, batterieloses Sensorsystem zur Steckzyklenzählung an Verbindungskomponenten
Augustin, Jörn; Klesse, Thomas; Neumeister, Peter; Oemus, Martin; Schubert, Lars; Schiefelbein, Frank-Peter | Conference Paper |
| 2019 | Model-based examination of an optimal use of carbon-based energy carriers in an integrated steel mill through integration of a direct reduction plant
Müller, Nils; Herz, Gregor; Reichelt, Erik; Jahn, Matthias | Conference Paper |
| 2019 | Modeling and sizing of a TEG with half-heusler TE legs for reducing fuel consumption in a heavy duty vehicle
Contet, A.; Lhomme, C.; Zuckermann, D.; Fey, A.; Rouaud, C.; Cimen, T.; Rabanser, P.; Rost, A.; Trache, M.; Feng, B. | Report |
| 2019 | Molecular engineering of conjugated acetylenic polymers for efficient cocatalyst-free photoelectrochemical water reduction
Sun, Hanjun; Öner, Ibrahim Halil; Wang, Tao; Zhang, Tao; Selyshchev, Oleksandr; Neumann, Christof; Fu, Yubin; Liao, Zhongquan; Xu, Shunqi; Hou, Yang; Turchanin, Andrey; Zahn, Dietrich R.T.; Zschech, Ehrenfried; Weidinger, Inez M.; Zhang, Jian; Feng, Xinliang | Journal Article |
| 2019 | Monitoring of compressor operations - A machine learning approach
Holstein, Peter; Moeck, Steffen; Tschöpe, Constanze; Duckhorn, Frank; Kolbe, Peter; Hennecke, Michael | Conference Paper |
| 2019 | Monolithic Ceramic IR-Emitter in Multilayer Technology
Goldberg, Adrian; Manhica, Birgit; Ziesche, Steffen | Conference Paper |
| 2019 | Multi-material Ceramic-Based Components - Additive Manufacturing of Black-and-white Zirconia Components by Thermoplastic 3D-Printing (CerAM - T3DP)
Weingarten, Steven; Scheithauer, Uwe; Johne, Robert; Abel, Johannes; Schwarzer, Eric; Moritz, Tassilo; Michaelis, Alexander | Journal Article |
| 2019 | Multi-sensor high-frequency eddy current depth detection in carbon fiber reinforced polymers
Matvieieva, Nataliia; Schulze, Martin H.; Chen, Lili; Patsora, Iryna V.; Heuer, Henning | Conference Paper |
| 2019 | Multimaterial components by material extrusion-fused filament fabrication (ME-FFF) - Production of an infrared heater
Kukla, Christian; Cano, Santiago; Moritz, Tassilo; Müller-Köhn, Axel; Courtney, P.; Hampel, Stefan; Holzer, Clemens | Journal Article |
| 2019 | Neue hoch verschleißfeste Metallguss-Keramik-Verbundwerkstoffe
Standke, Gisela | Journal Article |
| 2019 | Non-destructive investigations of pore morphology of micropore carbon materials
Stec, Jakub; Tarasiuk, Jacek; Nagy, Stanislaw; Smulski, Rafal; Gluch, Jürgen; Filipek, Robert | Journal Article |
| 2019 | Non-destructive weld inspection during the welding process - possibilities and limitations of an inline monitoring approach
Schubert, Frank; Bendjus, Beatrice; Cikalova, Ulana; Stephan, Mareike; Hipp, Raffael; Schulze, Eberhard; Barth, Martin; Bor, Zsolt; Heuer, Henning | Journal Article, Conference Paper |
| 2019 | A novel model for pyro-electro-catalytic hydrogen production in pure water
Schlechtweg, Julian; Raufeisen, Sascha; Stelter, Michael; Bräutigam, Patrick | Journal Article |
| 2019 | Numerical and experimental study of the spatial stress distribution on the cornea surface during a non-contact tonometry examination
Münch, Stefan; Röllig, Mike; Spörl, Eberhard; Balzani, Daniel | Journal Article |
| 2019 | Numerical study on the influence of material models for tin-based solder alloys on reliability statements
Metasch, René; Schwerz, Robert; Meier, K.; Röllig, Mike | Conference Paper |
| 2019 | On-turbine multisensors based on hybrid ceramic manufacturing technology
Ziesche, Steffen; Goldberg, Adrian; Partsch, Uwe; Kappert, Holger; Kind, Heidrun; Aden, Mirko; Naumann, Falk | Conference Paper, Journal Article |
| 2019 | Onlinefähige Signalauswertung für spektraloptische Sensoren mit einer Doppelphotodiode
Wuchrer, Roland; Härtling, Thomas; Gerlach, Gerald | Journal Article |
| 2019 | Operation experience with a novel highly efficient micro-scale CHP system based on fuel-flexible gasification and a SOFC
Obernberger, Ingwald; Brunner, T.; Ramerstorfer, C.; Kerschbaum, M.; Aravind, P.V.; Makkus, R.; Megel, Stefan; Hauth, Martin; Weissensteiner, S. | Conference Paper |
| 2019 | Operation of a SOFC CHP system with wood gas from a fixed-bed updraft gasifier
Weißensteiner, Stefan; Hauth, Martin; Seidl, Michael; Soukup, Nikolaus; Sallai, Christopher; Obernberger, Ingwald; Brunner, Thomas; Ramerstorfer, Christian; Megel, Stefan; Schnetter, Jens | Conference Paper |
| 2019 | Optical and Electrical Signal Transduction by Nanoplasmonic Structures for Emerging Sensing and Device Applications
Lee, Jihye
: Yeo, Jong-Souk (Thesis Supervisor); Kwon, Jang-Yeon (Thesis Committee Member); Kim, Jiwon (Thesis Committee Member); Altug, Hatice (Thesis Committee Member); Opitz, Jörg (Thesis Committee Member) | Dissertation |
| 2019 | Optimization of selectivity towards higher alcohols for iron-based Fischer-Tropsch catalysts
Wolke, Florian; Schaller, Max Rudolf; Dehmelt, Tom; Reichelt, Erik; Jahn, Matthias | Conference Paper |
| 2019 | Plasmonic sensor for on-site detection of diclofenac molecules
Steinke, Nadja; Döring, Sarah; Wuchrer, Roland; Kroh, Christoph; Gerlach, Gerald; Härtling, Thomas | Journal Article |
| 2019 | Polymer brushes on hexagonal boron nitride
Sheng, Wenbo; Amin, Ihsan; Neumann, Christof; Dong, Renhao; Zhang, Tao; Wegener, Erik; Chen, Wei-Liang; Förster, Paul; Tran, Hai Quang; Löffler, Markus; Winter, Andreas; Rodriguez, Raul D.; Zschech, Ehrenfried; Ober, Christopher K.; Feng, Xinliang; Turchanin, Andrey; Jordan, Rainer | Journal Article |
| 2019 | Potentials and challenges of additive manufacturing technologies for heat exchanger
Scheithauer, Uwe; Kordaß, Richard; Noack, Kevin; Eichenauer, Martin F.; Hartmann, Mathias; Abel, Johannes; Ganzer, Gregor; Lordick, Daniel | Book Article |
| 2019 | Powder based and suspension based additive manufacturing of hardmetal
Berger, Christian; Pötschke, Johannes; Abel, Johannes; Richter, Hans-Jürgen; Scheithauer, Uwe; Weingarten, Steven; Moritz, Tassilo; Michaelis, Alexander | Journal Article |
| 2019 | PrintPOWER - Paste systems for multifunctional copper power modules
Reinhardt, Kathrin; Körner, Stefan; Partsch, Uwe | Conference Paper |
| 2019 | Process development for additive manufacturing of functionally graded alumina toughened zirconia components intended for medical implant application
Schwarzer, Eric; Holtzhausen, Stefan; Scheithauer, Uwe; Ortmann, Claudia; Oberbach, Thomas; Moritz, Tassilo; Michaelis, Alexander | Journal Article |
| 2019 | Quantitative analysis of BMP-2 derived peptides covalently grafted to oxidized detonation nanodiamonds
Balakin, Sascha; Missirlis, Athanassios; Klemmed, Benjamin; Lee, Jihye; Opitz, Jörg; Yeo, Jong-Souk; Cuniberti, Gianaurelio | Journal Article |
| 2019 | Quantitative elucidation of the elusive role of defects in polycrystalline MFI zeolite membranes on xylene separation performance
Hong, Sungwon; Kim, Dongjae; Richter, Hannes; Moon, Jong Ho; Choi, Nakwon; Nam, Jaewook; Choi, Jungkyu | Journal Article |
| 2019 | Rapid screening of CO oxidation catalysts using optical calorimetry
Wegner, Karl; Wöllner, Michelle; Zippel, Rene; Medicus, Maximilian; Schade, Elke; Grothe, Julia; Kaskel, Stefan | Journal Article |
| 2019 | Report on SOP for dispersing nanomaterials in water and report on round robin test
Potthoff, Annegret; Unger, Wolfgang | Report |
| 2019 | Scale-up of ceramic nanofiltration membranes to meet large scale applications
Voigt, Ingolf; Richter, Hannes; Stahn, Michael; Weyd, Marcus; Puhlfürß, Petra; Prehn, Volker; Günther, Christiane | Journal Article |
| 2019 | A semiconducting layered metal-organic framework magnet
Yang, Chongqing; Dong, Renhao; Wang, Mao; Petkov, Petko S.; Zhang, Zhitao; Wang, Mingchao; Han, Peng; Ballabio, Marco; Bräuninger, Sascha A.; Liao, Zhongquan; Zhang, Jichao; Schwotzer, Friedrich; Zschech, Ehrenfried; Klauss, Hans-Henning; Canovas, Enrique; Kaskel, Stefan; Bonn, Mischa; Zhou, Shengqiang; Heine, Thomas; Feng, Xinliang | Journal Article |
| 2019 | SHM using guided waves - Recent activities and advances in Germany
Mueller, Inka; Moll, Jochen; Tschöke, Kilian; Prager, Jens; Kexel, Christian; Schubert, Lars; Lugovtsova, Yevgeniya; Bach, Martin; Vogt, Thomas | Conference Paper |
| 2019 | Simulationsgestützte Modellierung der elastischen Eigenschaften mikrorissbehafteter Materialien und deren nichtlineare Wechselwirkung mit geführten Wellen
Rjelka, Marek
: Köhler, Bernd (Betreuer); Kühnicke, Elfgard (Betreuender Hochschullehrer); Mayer, Andreas (Gutachter) | Dissertation |
| 2019 | Sol-gel method for synthesis of Li+-stabilized Na-β”-alumina for solid electrolytes in sodium-based batteries
Augustina, Anisa Isabella; Skadell, Karl; Dirksen, Cornelius; Kusumocahyo, Samuel P. | Conference Paper |
| 2019 | Stress Characterization of Ceramic Substrates by Laser Speckle Photometry
Chen, Lili; Cikalova, Ulana; Münch, Stefan; Röllig, Mike; Bendjus, Beatrice | Conference Paper |
| 2019 | Structural features and nitrogen positions in titanium oxynitride films grown in plasma of magnetron discharge
Pichugin, Vladimir F.; Pustovalova, Alla A.; Evdokimov, Kirill E.; Konishchev, M.E.; Kuzmin, Oleg S.; Boytsova, E.L.; Beshchasna, Natalia; Ficai, Anton; Aubakirova, D.M.; Sun, Zhilei | Conference Paper |
| 2019 | Surface evaluation of titanium oxynitride coatings used for developing layered cardiovascular stents
Beshchasna, Nataliia; Kwan Ho, Au Yeung; Saqib, Muhammad; Kraśkiewicz, Honorata; Wasyluk, Łukasz; Kuzmin, Oleg; Duta, Oana; Ficai, Denisa; Trusca, Roxana; Ficai, Anton; Pichugin, Vladimir F.; Opitz, Jörg; Andronescu, Ecaterina | Journal Article |
| 2019 | Techno-economic analysis of a highly integrated Power-to-liquid process
Rix, Christopher; Herz, Gregor; Reichelt, Erik; Jahn, Matthias | Conference Paper |
| 2019 | Thermoplastic 3D Printing of Hardmetals
Pötschke, Johannes; Weingarten, Steven; Scheithauer, Uwe; Mayer, Markus | Conference Paper |
| 2019 | Three-dimensional structural comparison of tantalum glancing angle deposition thin films by FIB-SEM
Ott, Tobias; Roldan, Diego; Redenbach, Claudia; Schladitz, Katja; Godehardt, Michael; Höhn, Sören | Journal Article |
| 2019 | Through interface optimization to new generation of robust electrolyte supported cell with high power density
Trofimenko, Nikolai; Kusnezoff, Mihails; Mosch, Sindy; Michaelis, Alexander | Conference Paper |
| 2019 | Towards Actuation Improvement of Low-profile Piezo Fibre Composites by Notched Electrodes
Hohlfeld, Kai; Neumeister, Peter; Michaelis, Alexander; Gebhardt, Sylvia | Journal Article |
| 2019 | Towards reconfigurable electronics: Silicidation of top-down fabricated silicon nanowires
Khan, Muhammad Bilal; Deb, Dipjyoti; Kerbusch, Jochen; Fuchs, Florian; Löffler, Markus; Banerjee, Sayanti; Mühle, Uwe; Weber, Walter Michael; Gemming, Sibylle; Schuster, Jörg; Erbe, Artur; Georgiev, Yordan M. | Journal Article |
| 2019 | Treatment of oily and salty mining water by ceramic nanofiltration membranes
Voigt, Ingolf; Richter, Hannes; Weyd, Marcus W.; Milew, Kerstin; Haseneder, Roland; Günther, Christiane; Prehn, Volker | Journal Article |
| 2019 | Tungsten carbide nanoparticles show a broad spectrum virucidal activity against enveloped and nonenveloped model viruses using a guideline-standardized in vitro test
Pfaff, Florian; Glück, Brigitte; Hoyer, Thomas; Rohländer, David G.; Sauerbrei, Andreas; Zell, Roland | Journal Article |
| 2019 | Ultrasonic dual element probes revisited - complex wave phenomena as a basis for transducer design and optimization
Schubert, Frank; Herzog, Thomas; Walter, Susan; Heuer, Henning | Journal Article, Conference Paper |
| 2019 | Understanding Thickness and Porosity Effects on the Electrochemical Performance of LiNi0.6Co0.2Mn0.2O2-based Cathodes for High Energy Li-Ion Batteries
Heubner, Christian; Nickol, Alexander; Seeba, Jann; Reuber, Sebastian; Junker, Nils; Wolter, Mareike; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2019 | Unlimited colors - Glass powder injection moulding
Mannschatz, Anne; Rost, Axel; Müller-Köhn, Axel; Schilm, Jochen; Moritz, Tassilo; Jegust, Stephan; Witzleben, Moritz von | Journal Article |
| 2019 | Using of zeolite NaA membranes for improved glycol dewatering in a pilot plant for natural gas drying
Lubenau, U.; Mothes, R.; Worch, D.; Kühnert, J.T.; Weyd, M.; Richter, H.; Simon, L.; Neuhaus, G. | Conference Paper |
| 2019 | Vorrichtung und Verfahren zur Herstellung eines Zeoliths
Hoffmann, Claudia; Ommer, Matthias; Philipp, Janet; Richter, Hannes | Patent |
| 2019 | Vorrichtung zur Bestimmung der Ermüdung von Proben, die einer thermo-mechanischen Wechselbeanspruchung ausgesetzt werden
Metasch, René; Röllig, Mike; Naumann, Uwe; Kaufmann, Rainer; Wiesenhütter, Felix | Patent |
| 2019 | Wavelength dependent laser material processing of ceramic materials
Polenz, Stefan; Seidel, André; Moritz, Juliane; Kunz, Willy; Riede, Mirko; Lopez, Elena; Brückner, Frank; Leyens, Christoph | Journal Article |
| 2019 | Wellenlängenabhängige Herstellung keramischer Werkstoffe für Luft- und Raumfahrtanwendungen mittels Lasertechnologie
Polenz, Stefan; Kunz, Willy; Rößler, Marco; Lopez, Elena; Brückner, Frank; Leyens, Christoph | Conference Paper |
| 2019 | X-ray characterization of morphology and structure of materials at multiple length scales
Zschech, Ehrenfried | Abstract |
| 2019 | Zerstörungsfreie Prüfung metallischer Überlappschweißverbindungen in Lithium-Ionen-Batterien mit Fokus auf die optisch angeregte Infrarotthermografie
Just, Philipp
: Meyendorf, Norbert (Betreuer, Hochschullehrer); Mücklich, Silke (Gutachter) | Dissertation |
| 2019 | Zu belüftende Extrusionsvorrichtung zur Herstellung eines mit einem Boden verschlossenen Keramikrohres
Hofacker, Martin; Kiesel, Lutz | Patent |
| 2019 | Zusammenhänge zwischen rheologischen Eigenschaften und der Abscheidbarkeit keramischer Suspensionen
Reinhardt, Kathrin
: Michaelis, Alexander (Gutachter); Feller, Jörg (Gutachter) | Dissertation |
| 2019 | Zustandsüberwachung an Rotorblättern von Windkraftanlagen mittels Schallemissionsanalyse
Schubert, Lars; Schulze, Eberhard; Weihnacht, Bianca; Henker, Tobias; Frankenstein, Bernd | Conference Paper |
| 2018 | 30 nm X-ray focusing correlates oscillatory stress, texture and structural defect gradients across multilayered TiN-SiOx thin film
Keckes, Jozef; Daniel, Rostislav; Todt, Juraj; Zalesak, Jakub; Sartory, Bernhard; Braun, Stefan; Gluch, Jürgen; Rosenthal, Martin; Burghammer, Manfred; Mitterer, C.; Niese, S.; Kubec, Adam | Journal Article |
| 2018 | 3D Multilayered Ceramics - harsh environment interposer technologies expand into 3rd dimension
Ziesche, Steffen; Lenz, Christian; Müller-Köhn, Axel; Scheithauer, Uwe; Partsch, Uwe | Conference Paper |
| 2018 | 3D-cathode design with foam-like aluminum current collector for high energy density lithium-ion batteries
Fritsch, Marco; Standke, Gisela; Heubner, Christian; Langklotz, Ulrike; Michaelis, Alexander | Journal Article |
| 2018 | 57Fe Mössbauer study into oxygen vacancy disorder in (Ba0.5Sr0.5)(Co0.8Fe0.2)O3−δ
Gaczynski, Piotr; Harpf, Anja; Böer, Jürgen; Kircheisen, Robert; Kriegel, Ralf; Becker, Klaus-Dieter | Journal Article |
| 2018 | Additive Manufacturing of ceramic heat exchanger. Opportunities and limits of the Lithography-based Ceramic Manufacturing (LCM)
Scheithauer, Uwe; Schwarzer, Eric; Moritz, Tassilo; Michaelis, Alexander | Journal Article |
| 2018 | Advanced methods in NDE using machine learning approaches
Wunderlich, Christian; Tschöpe, Constanze; Duckhorn, Frank | Conference Paper |
| 2018 | Analysis of 28 nm SRAM cell stability under mechanical load applied by nanoindentation
Clausner, André; Schlipf, Simon; Kurz, G.; Otto, M.; Paul, J.; Giering, Kay-Uwe; Warmuth, Jens; Lange, André; Jancke, Roland; Aal, A.; Rosenkranz, Rüdiger; Gall, Martin; Zschech, Ehrenfried | Conference Paper |
| 2018 | Analysis of electromigration-induced backflow stresses in Cu(Mn) interconnects using high statistical sampling
Kraatz, Matthias; Sander, Christoph; Clausner, André; Hauschildt, M.; Standke, Yvonne; Gall, Martin; Zschech, Ehrenfried | Conference Paper |
| 2018 | Analysis of the 3D draping behavior of carbon fiber non-crimp fabrics with eddy current technique
Bardl, Georg; Nocke, Andreas; Hübner, Matthias; Gereke, Thomas; Pooch, Matthias; Schulze, Martin; Heuer, Henning; Schiller, Marko; Kupke, Richard; Klein, Marcus; Cherif, Chokri | Journal Article |
| 2018 | Anode für eine elektrochemische Zelle sowie ein Verfahren zur Herstellung einer elektrochemischen Zelle mit einer solchen Anode
Kusnezoff, Mihails; Trofimenko, Nikolai | Patent |
| 2018 | Automatisierte zerstörungsfreie Prüfung des Füllgrades von Falzverklebungen mittels Phased Array Ultraschall
Klausing, Maximilian; Cusenza, Salvatore; Heuer, Henning | Conference Paper |
| 2018 | Ein autonomer Flammenionisationsdetektor zur Emissionsüberwachung
Förster, Jan; Koch, Christian; Kuipers, Winfred; Lenz, Christian; Ziesche, Steffen | Conference Paper |
| 2018 | BaZrxTi1-xO3 epitaxial thin films for electrocaloric investigations
Engelhardt, Stefan; Molin, Christian; Gebhardt, Sylvia; Fähler, Sebastian; Nielsch, Kornelius; Hühne, Ruben | Journal Article |
| 2018 | Beiträge zur chemisch-biologischen Oberflächenmodifikation von Nanodiamanten aus der Detonationssynthese
Pohl, Andrea
: Bley, Thomas (Gutachter); Krueger, Anke (Gutachter); Opitz, Jörg (Betreuer) | Dissertation |
| 2018 | Berechnung von Laufzeit- und Amplitudenverteilung durch simultane Lösung der Eikonal- und Transportgleichung mittels einer adaptierten Fast-Marching-Methode
Neubeck, Robert; Buske, Stefan; Schubert, Lars | Presentation |
| 2018 | Binding energy referencing for XPS in alkali metal-based battery materials research (II): Application to complex composite electrodes
Oswald, Steffen; Thoss, Franziska; Zier, Martin; Hoffmann, Martin; Jaumann, Tony; Herklotz, Markus; Nikolowski, Kristian; Scheiba, Frieder; Kohl, Michael; Giebeler, Lars; Mikhailova, Daria; Ehrenberg, Helmut | Journal Article |
| 2018 | Biomechanical, biochemical, and cell biological evaluation of different collagen scaffolds for tendon augmentation
Gabler, Carolin; Spohn, Juliane; Tischer, Thomas; Bader, Rainer | Journal Article |
| 2018 | CerAMfacturing. Development of ceramic and multi-material components by additive manufacturing methods for personalized medical products
Scheithauer, Uwe; Johne, Robert; Weingarten, Steven; Schwarzer, Eric; Abel, Johannes; Müller-Köhn, Axel; Günther, Anne; Moritz, Tassilo | Journal Article |
| 2018 | Ceramic-supported thin film composite membrane for organic solvent nanofiltration
Xia, Lingling; Ren, Jian; Weyd, Marcus; McCutcheon, Jeffrey R. | Journal Article |
| 2018 | Characterization of spatial distribution of electrolyte in molten carbonate fuel cell cathodes
Wejrzanowski, Tomasz; Gluch, Jürgen; Ibrahim, Samih Haj; Cwieka, Karol; Milewski, Jaroslaw; Zschech, Ehrenfried | Journal Article |
| 2018 | CO2 Emission Reduction Potential in the Steel Industry by Integration of a Direct Reduction Process into Existing Steel Mills
Müller, Nils; Herz, Gregor; Reichelt, Erik; Jahn, Matthias | Conference Paper |
| 2018 | Cobalt-based metal-organic framework nanoarrays as bifunctional oxygen electrocatalysts for rechargeable Zn-air batteries
Chen, Guangbo; Zhang, Jian; Wang, Faxing; Wang, Lanlan; Liao, Zhongquan; Zschech, Ehrenfried; Müllen, Klaus; Feng, Xinliang | Journal Article |
| 2018 | A cognitive user interface for a multi-modal human-machine interaction
Tschöpe, Constanze; Duckhorn, Frank; Huber, Markus; Meyer, Werner; Wolff, Matthias | Conference Paper |
| 2018 | Combination of soft X-ray microscopy with in-situ mechanical testing to image crack propagation in microchips
Kutukova, Kristina; Liao, Zhongquan; Werner, Stephan; Guttmann, Peter; Standke, Yvonne; Gluch, Jürgen; Schneider, Gerd; Zschech, Ehrenfried | Journal Article, Conference Paper |
| 2018 | Compact LTCC Packaging and Printing Technologies for Sub-THz Modules
Ihle, Martin; Ziesche, Steffen; Zech, Christian; Baumann, Benjamin | Conference Paper |
| 2018 | Comparative study of corrosion performance of HVOF-sprayed coatings produced using conventional and suspension WC-Co feedstock
Ahmed, Rehan R.; Vourlias, George; Algoburi, A.; Vogiatzis, C.; Chaliampalias, D.; Skolianos, S.; Berger, Lutz-Michael; Paul, S.; Faisal, Nadimul; Toma, Filofteia-Laura; Al-Anazi, Nayef; Goosen, M.F.A. | Journal Article |
| 2018 | Comparison of chronoamperometric response and rate-performance of porous insertion electrodes: Towards an accelerated rate capability test
Heubner, Christian; Lämmel, Christoph; Nickol, Alexander; Liebmann, Tobias; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2018 | A continuum model for sintering processes incorporating elasticity effects
Stark, Sebastian; Neumeister, Peter | Journal Article |
| 2018 | Copper-surface-mediated synthesis of acetylenic carbon-rich nanofibers for active metal-free photocathodes
Zhang, Tao; Hou, Yang; Dzhagan, Volodymyr M.; Liao, Zhongquan; Chai, Guoliang; Löffler, Markus; Olianas, Davide; Milani, Alberto; Xu, Shunqi; Tommasini, Matteo; Zahn, Dietrich R.T.; Zheng, Zhikun; Zschech, Ehrenfried; Jordan, Rainer Andreas; Feng, Xinliang | Journal Article |
| 2018 | A coronene-based semiconducting two-dimensional metal-organic framework with ferromagnetic behavior
Dong, Renhao; Zhang, Zhitao; Tranca, Diana C.; Zhou, Shengqiang; Wang, Mingchao; Adler, Peter; Liao, Zhongquan; Liu, Feng; Sun, Yan; Shi, Wujun; Zhang, Zhe; Zschech, Ehrenfried; Mannsfeld, Stefan C.B.; Felser, Claudia; Feng, Xinliang | Journal Article |
| 2018 | Corrosion resistance of silicon-infiltrated silicon carbide (SiSiC)
Striegler, Maria; Matthey, Björn; Mühle, Uwe; Michaelis, Alexander; Herrmann, Mathias | Journal Article |
| 2018 | Data-driven fatigue crack quantification and prognosis using nonlinear ultrasonic modulation
Lim, Hyung Jin; Sohn, Hoon; Kim, Yongtak | Journal Article |
| 2018 | Deconvolution of cyclic voltammograms of blended lithium insertion compounds by using a model-like blend electrode
Heubner, Christian; Liebmann, Tobias; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2018 | Defect detection during laser welding by Laser Speckle Photometry
Cikalova, Ulana; Bendjus, Beatrice; Stüwe, Tobias; Reyes de Acosta, Ruth Veronica | Conference Paper |
| 2018 | A delamination strategy for thinly layered defect-free high-mobility black phosphorus flakes
Yang, Sheng; Zhang, Ke; Ricciardulli, Antonio Gaetano; Zhang, Panpan; Liao, Zhongquan; Lohe, Martin R.; Zschech, Ehrenfried; Blom, Paul W.M.; Pisula, Wojciech; Müllen, Klaus; Feng, Xinliang | Journal Article |
| 2018 | Deriving the Principles of the Freeze Foaming Process by CT evaluation of Cellular Bioceramics
Ahlhelm, Matthias; Werner, David; Kaube, Nils; Maier, Johanna; Abel, Johannes; Behnisch, Thomas; Moritz, Tassilo; Michaelis, Alexander; Gude, Maik | Journal Article |
| 2018 | Desorption and electrical conductivity studies of indium tin oxide powders and thick films
Dietrich, Stefan; Kusnezoff, Mihails | Journal Article, Conference Paper |
| 2018 | Detection of diclofenac molecules by planar and nanostructured plasmonic sensor substrates
Steinke, Nadja; Rio, Marisa; Wuchrer, Roland; Schuster, Christiane; Ljasenko, Evgenij; Knopp, Dietmar; Gerlach, Gerald; Härtling, Thomas | Journal Article |
| 2018 | Development and analysis of high temperature stable interconnections on thick films using micro resistance welding for sensors and MEMS
Gierth, Paul; Rebenklau, Lars | Conference Paper |
| 2018 | Development and application of a SimulationX library for magnetic shape memory alloys
Effner, Annabell; Zawada, Tobias; Ehle, Fabian; Neubert, Holger; Weber, Jürgen | Conference Paper |
| 2018 | Development and application of binary suspensions in the ternary system Cr2O3-TiO2-Al2O3 for S-HVOF spraying
Potthoff, Annegret; Kratzsch, Robert; Barbosa, Maria M.; Kulissa, Nick; Kunze, Oliver; Toma, Filofteia-Laura | Journal Article |
| 2018 | Development of a new highly efficient and fuel flexible medium-scale CHP technology based on fixed-bed updraft biomass gasification and a SOFC
Brunner, Thomas; Biedermann, Friedrich; Obernberger, Ingwald; Hirscher, Simon; Schöch, Martin; Milito, Claudio; Leibold, Hans; Sitzmann, Jürgen; Megel, Stefan; Hauth, Martin; Vos, Yves de; Götz, Thomas; Shen, Li; Corona, Blanca | Conference Paper |
| 2018 | Development of single-fiber piezocomposite transducers for 3D ultrasound computer tomography
Zapf, Michael; Hohlfeld, Kai; Ruiter, Nicole V.; Pfistner, Patrick; Dongen, Koen W.A. van; Gemmeke, Hartmut; Michaelis, Alexander; Gebhardt, Sylvia | Journal Article |
| 2018 | Developments for highly reliable electronics - experiments on combined thermal and vibration loading
Meier, Karsten; Röllig, Mike; Bock, Karlheinz | Conference Paper |
| 2018 | Dielektrisches Element sowie ein Verfahren zur Herstellung
Greiner, Anna; Neubert, Holger; Neumeister, Peter | Patent |
| 2018 | Direct measurement of the electrocaloric temperature change in multilayer ceramic components by resistance-welded thermocouple wires
Greiner, Anna; Molin, Christian; Neubert, Holger; Gebhardt, Sylvia; Neumeister, Peter | Journal Article |
| 2018 | Dynamic in vitro microfluidic system for standardised osteoimmunological evaluation of implant materials
Ißleib, Constantin; Kuhlmeier, Dirk; Spohn, Juliane | Poster |
| 2018 | Eddy current testing in CFRP production
Bardl, Georg; Kupke, Richard; Heuer, Henning; Cherif, Chokri | Journal Article |
| 2018 | Effect of TiB2 nano-inclusions on the thermoelectric properties of boron rich boron carbide
Ponnusamy, Prasanna; Feng, Bing; Martin, Hans-Peter; Groen, Pim | Journal Article, Conference Paper |
| 2018 | Einflüsse von Prozessparametern auf das Gefüge und das Korrosionsverhalten von Metall-Keramik-Werkstoffverbunden
Günther, Anne
: Aneziris, Christos G. (Gutachter); Michaelis, Alexander (Gutachter) | Dissertation |
| 2018 | Electrochemical characterization of a CFY-stack with planar electrolyte-supported solid oxide cells in rSOC operation
Preininger, Michael; Subotić, Vanja; Stoeckl, Bernhard; Schauperl, Richard; Reichholf, David; Megel, Stefan; Kusnezoff, Mihails; Hochenauer, Christoph | Journal Article |
| 2018 | Electrochemical deposition of reactive material systems for assembly and packaging applications
Hertel, Silvia; Schulte, Wiebke; Weiser, Mathias; Becker, Mike; Wiemer, Maik; Otto, Thomas | Conference Paper |
| 2018 | Electrochemical machining of tungsten carbide
Schubert, Nora; Schneider, Michael; Michaelis, Alexander; Manko, Michal; Lohrengel, Manuel M. | Journal Article |
| 2018 | Enhancement of hardness in niobium carbide composites
Pötschke, J.; Vornberger, A.; Berger, C. | Conference Paper |
| 2018 | Entwicklung angepasster Simulationsmodelle für Methoden der Zustandsüberwachung basierend auf geführten Wellen
Tschöke, Kilian; Gaul, Tobias | Presentation |
| 2018 | Entwicklung und Charakterisierung von LTCC/Piezokeramik-Modulen für adaptive Strukturkomponenten
Flössel, Markus
: Michaelis, Alexander (Gutachter); Drossel, Welf-Guntram (Gutachter); Gebhardt, Sylvia (Betreuer) | Dissertation |
| 2018 | Entwicklung von miniaturisierten Dickschicht-Thermoelement-Arrays für automobile und industrielle Anwendungen
Gierth, Paul; Rebenklau, Lars; Bachmann, Eric; Niedermeyer, Lars; Augsburg, Klaus | Conference Paper |
| 2018 | Erratum to "Semi-empirical master curve concept describing the rate capability of lithium insertion electrodes" [J. Power Sources 380 (2018) 83-91]
Heubner, Christian; Seeba, Jann; Liebmann, Tobias; Nickol, Alexander; Börner, Stefan; Fritsch, Marco; Nikolowski, Kristian; Wolter, Mareike; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2018 | Evaluation of Nanoparticle Inks on Flexible and Stretchable Substrates for Biocompatible Application
Schubert, Martin; Rebohle, Lars; Wang, Yakun; Fritsch, Marco; Bock, Karlheinz; Vinnichenko, Mykola; Schumann, Thomas | Conference Paper |
| 2018 | Evaluation of the pH-sensitive swelling of a hydrogel by means of a plasmonic sensor substrate
Kroh, Christoph; Wuchrer, Roland; Günther, Margarita; Härtling, Thomas; Gerlach, Gerald | Journal Article |
| 2018 | Evaluation of the pore morphology formation of the Freeze Foaming process by in situ computed tomography
Ahlhelm, Matthias; Werner, David; Maier, Johanna; Abel, Johannes; Behnisch, Thomas; Moritz, Tassilo; Michaelis, Alexander; Gude, Maik | Journal Article |
| 2018 | Experimental determination of the Young's modulus of copper and solder materials for electronic packaging
Krämer, Frank; Röllig, Mike; Metasch, René; Ahmar, Joseph Al; Meier, Karsten; Wiese, Steffen | Journal Article |
| 2018 | Experimental evaluation of volumetric solar absorbers - ceramic foam vs. an innovative rotary disc absorber concept
Zaversky, Fritz; Sánchez, Marcelino; Roldán, M. Isabel; Ávila-Marin, Antonio L.; Füssel, Alexander; Adler, Jörg; Knoch, Martin; Dreitz, Andreas | Conference Paper |
| 2018 | Experimental Verification of FE-Models for Thermo-Mechanical Loading using Digital Image Correlation
Schwerz, Robert; Metasch, René; Röllig, Mike; Wolter, Klaus-Jürgen | Conference Paper |
| 2018 | Fatigue measurement setup under combined thermal and vibration loading on electronic SMT assembly
Meier, K.; Metasch, R.; Roellig, M.; Bock, K. | Journal Article |
| 2018 | Flammenionisationsdetektor mit interner Gasversorgung in Mehrlagenkeramiktechnologie
Ziesche, Steffen; Lenz, Christian; Kuipers, Winfred; Förster, Jan; Koch, Christian | Conference Paper |
| 2018 | Flexible high-performance metallic interconnects prepared by innovative diode laser array treatment of inkjet-printed layers
Vinnichenko, Mykola; Fritsch, Marco; Xiao, Junchen; Makarov, Denys; Voitsekhivska, Tetiana; Sauchuk, Viktar; Kusnezoff, Mihails | Abstract |
| 2018 | FO-WLP multi-DOF inertial sensor for automotive applications
Kuisma, Heikki; Cardoso, Andre; Mäntyoja, Nikolai; Rosenkrantz, Rüdiger; Nurmi, Sami; Gall, Martin | Conference Paper |
| 2018 | Fraunhofer Institute for Ceramic Technologies and Systems. Annual Report 2017/2018
| Annual Report |
| 2018 | Fraunhofer-Institut für Keramische Technologien und Systeme. Jahresbericht 2017/2018
| Annual Report |
| 2018 | Füllverhalten, Schüttungszustand und resultierende Qualität keramischer Bauteile - Prozessführung und Prozessdesign von Matrizenfüllsystemen
Fries, Manfred; Kraft, T. | Report |
| 2018 | Functional integration - structure-integrated wireless sensor technology targeting smart mechanical engineering applications
Rülke, Steffen; Beyer, Volkhard; Zorn, Wolfgang; Meinig, Marco; Wecker, Julia; Reuter, Danny; Deicke, Frank; Clausner, André; Werner, Thomas | Conference Paper |
| 2018 | Gaskorrosion
Klemm, Hagen | Book Article |
| 2018 | Gassensitives Sensorelement
Dietrich, Stefan; Kusnezoff, Mihails | Patent |
| 2018 | Gating hysteresis as an indicator for silicon nanowire FET biosensor
Ibarlucea, Bergoi; Römhildt, Lotta; Zörgiebel, Felix; Pregl, Sebastian; Vahdatzadeh, Maryam; Weber, Walter M.; Mikolajick, Thomas; Opitz, Jörg; Baraban, Larysa; Cuniberti, Gianaurelio | Journal Article |
| 2018 | Generative Fertigung keramischer Bauteile
Scheithauer, Uwe; Richter, Hans-Jürgen | Book Article |
| 2018 | Glass ceramics sealants for SOFC interconnects based on a high chromium sinter alloy
Schilm, Jochen; Rost, Axel; Kusnezoff, Mihails; Megel, Stefan; Michaelis, Alexander | Journal Article |
| 2018 | Grain growth inhibition of hardmetals during initial heat-up
Pötschke, Johannes; Gestrich, Tim; Richter, Volkmar | Journal Article |
| 2018 | Hartmetallschichten - Historie und Perspektiven
Berger, Lutz-Michael | Conference Paper |
| 2018 | Hartstoffbeschichtete Körper aus Metall, Hartmetall, Cermet oder Keramik und Verfahren zur Herstellung derartiger Körper
Endler, Ingolf; Höhn, Mandy | Patent |
| 2018 | Heat development during the ECM of tungsten carbide
Schneider, Michael; Junker, Nils | Conference Paper |
| 2018 | Heat generation rates of NaFePO4 electrodes for sodium-ion batteries and LiFePO4 electrodes for lithium-ion batteries
Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2018 | Heat haze effects in thermal chamber tensile tests on digital image correlation
Yuile, Adam; Schwerz, Robert; Röllig, Mike; Metasch, René; Wiese, Steffen | Conference Paper |
| 2018 | High-definition nanoimprint stamp fabrication by atomic layer etching
Khan, Sabbir A.; Suyatin, Dmitry B.; Sundqvist, Jonas; Graczyk, Mariusz; Junige, Marcel; Kauppinen, Christoffer; Kvennefors, Anders; Huffman, Maria; Maximov, Ivan | Journal Article |
| 2018 | Highly Efficient Production of Valuable Hydrocarbons from CO2 and H2O via an Integrated co-Electrolysis-Based Synthesis Process
Reichelt, Erik; Herz, Gregor; Schaller, Max Rudolf; Jahn, Matthias | Conference Paper |
| 2018 | How additive manufacturing can shape an industry 4.0 environment
Müller, Bernhard; Frieß, Uwe; Langer, Tino; Töppel, Thomas; Gebauer, Mathias; Klaeger, Uwe; Wollbrink, Moritz; Zöllner, Volker; Lausch, Holger | Presentation |
| 2018 | Hybridization of materials and processes by additive manufacturing
Moritz, Tassilo; Scheithauer, Uwe; Weingarten, Steven; Abel, Johannes; Johne, Robert; Michaelis, Alexander; Hampel, Stefan; Cano, Santiago | Conference Paper |
| 2018 | Imitating the weathering of microplastics in the marine environment
Oelschlägel, Kathrin; Pfeiffer, Jenny; Potthoff, Annegret | Conference Paper |
| 2018 | Improving the high temperature abrasion resistance of thermally sprayed Cr3C2-NiCr coatings by WC addition
Janka, Leo; Berger, Lutz-Michael; Norpoth, Jonas; Trache, Richard; Thiele, Sven; Tomastik, Christian; Matikainen, Ville; Vuoristo, Petri | Journal Article |
| 2018 | In-situ X-ray microscopy of crack-propagation to study fracture mechanics of on-chip interconnect structures
Kutukova, Kristina; Liao, Zhongquan; Werner, Stephan; Guttmann, Peter; Standke, Yvonne; Gluch, Jürgen; Schneider, Gerd; Zschech, Ehrenfried | Journal Article |
| 2018 | In-situ xrd-investigation of electrolytic copper layer
Schneider, Michael; Weiser, Mathias; Matthey, Björn; Herrmann, Mathias | Journal Article |
| 2018 | Influence of feedstock powder modification by heat treatments on the properties of APS-sprayed Al2O3-40%TiO2 coatings
Berger, Lutz-Michael; Sempf, Kerstin; Sohn, Yoo Jung; Vaßen, Robert | Journal Article |
| 2018 | Influence of the glass-ceramic synthesis route on the ionicconductivity of the sodium solid electrolyte Na2O-Y2O3-SiO2 (NYS)
Münchgesang, Wolfram; Wagner, Dörte; Motylenko, Mykhaylo; Schilm, Jochen; Rafaja, David; Meyer, Dirk | Abstract |
| 2018 | Innovative laser processing of inkjet-printed layers
Vinnichenko, Mykola; Fritsch, Marco; Makarov, Denys; Trofimenko, Nikolai; Sauchuk, Viktar; Kusnezoff, Mihails | Poster |
| 2018 | Integration sensorisch-diagnostischer und aktorisch-therapeutischer Funktionen in Implantaten
Lausch, Holger; Töppel, Thomas | Book Article |
| 2018 | Integrierte Strukturüberwachung für kohlefaserverstärkte Kunststoffverbundwerkstoffe im Automobil
Tschöke, Kilian; Gaul, Tobias; Klesse, Thomas; Lieske, Uwe; Dungern, Friedrich von; Guerrero-Santafe, Julia; Wessel-Segebade, Hannelore | Presentation |
| 2018 | Inter-diffusion between thermally sprayed Cr3C2-NiCr coatings and an Alloy 625 substrate during long-term exposure at 500 °C, 700 °C and 900 °C
Matthews, Steven; Berger, Lutz-Michael | Journal Article |
| 2018 | Internal dynamics of blended Li-insertion electrodes
Heubner, Christian; Liebmann, Tobias; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2018 | Investigation of droplet deposition for suspensions usable for Thermoplastic 3D Printing (T3DP)
Scheithauer, Uwe; Johne-Michaelis, Robert; Weingarten, Steven; Schwarzer, Eric; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Journal Article |
| 2018 | Investigation of electrochemical processes in CO2 sensitive electrodes
Dietrich, Stefan; Kusnezoff, Mihails; Mosch, Sindy; Baumgärtner, Christoph | Journal Article, Conference Paper |
| 2018 | Investigation of foam structure formation in the freezing foaming process based on in-situ computed tomography
Maier, Johanna; Behnisch, Thomas; Geske, Vinzenz; Ahlhelm, Matthias; Werner, David; Moritz, Tassilo; Michaelis, Alexander; Gude, Maik | Journal Article |
| 2018 | Investigation of percolation behavior of metal-polymer composites using High Frequency Eddy Current spectroscopy
Datzmann, Iryna
: Hillmann, Susanne (Betreuer); Heuer, Henning (Gutachter); Plettemeier, Dirk (Vorsitzender); Boller, Christian (Gutachter); Tatarchuk, Dmytro (Gutachter) | Dissertation |
| 2018 | Investigation of the foam development stages by non-destructive testing technology using the freeze foaming process
Maier, Johanna; Behnisch, Thomas; Geske, Vinzenz; Ahlhelm, Matthias; Werner, David; Moritz, Tassilo; Michaelis, Alexander; Gude, Maik | Journal Article |
| 2018 | Investigation of the structure formation of Freeze Foams on the example of biocompatible ceramics
Werner, David; Ahlhelm, Matthias; Maier, Johanna; Behnisch, Thomas; Moritz, Tassilo; Michaelis, Alexander; Gude, Maik | Presentation |
| 2018 | Iron-based Fischer-Tropsch catalysts for higher alcohol synthesis
Schaller, Max Rudolf; Reichelt, Erik; Jahn, Matthias | Journal Article |
| 2018 | Irreversible made reversible: Increasing the electrochemical capacity by understanding the structural transformations of NaxCo0.5Ti0.5O2
Maletti, Sebastian; Giebeler, Lars; Oswald, Steffen; Tsirlin, Alexander A.; Senyshyn, Anatoliy; Michaelis, Alexander; Mikhailova, Daria | Journal Article |
| 2018 | Komposit-Kathodenschichtaufbau für Festkörperbatterien auf Lithiumbasis und ein Verfahren zu seiner Herstellung
Kusnezoff, Mihails; Nikolowski, Kristian; Schilm, Jochen; Wolter, Mareike | Patent |
| 2018 | Korrosion in wässrigen Medien
Schilm, Jochen; Herrmann, Mathias | Book Article |
| 2018 | Kundenspezifische Ultraschallwandler auf Basis von 1-3-Piezokompositen
Hohlfeld, Kai; Neumeister, Peter; Neubert, Holger; Gebhardt, Sylvia | Presentation |
| 2018 | Laboratory computed x-ray tomography - a nondestructive technique for 3D microstructure analyis of materials
Zschech, Ehrenfried; Löffler, Markus; Krüger, Peter; Gluch, Jürgen; Kutukova, Kristina; Zglobicka, Izabela; Silomon, Jendrik; Rosenkranz, Rüdiger; Standke, Yvonne; Topal, E. | Journal Article |
| 2018 | A laboratory X-ray microscopy study of cracks in on-chip interconnect stacks of integrated circuits
Kutukova, Kristina; Niese, Sven; Sander, Christoph; Standke, Yvonne; Gluch, Jürgen; Gall, Martin; Zschech, Ehrenfried | Journal Article |
| 2018 | Langzeitzuverlässige Füllstandsmessung durch ein faserverbundintegriertes Elektroniksystem
Schwerz, Robert; Röllig, Mike; Weißenborn, Oliver; Geller, Sirko; Modler, Niels; Sauer, Sebastian | Conference Paper |
| 2018 | Laser Speckle Photometry - an advanced method for defect detection in ceramics
Chen, Lili; Cikalova, Ulana; Bendjus, Beatrice | Conference Paper |
| 2018 | Laser Speckle Photometry for Stress Measuring at Industrial Components
Chen, Lili; Cikalova, Ulana; Münch, Stefan; Röllig, Mike; Bendjus, Beatrice | Conference Paper |
| 2018 | Laser-Multi-Pass-Narrow-Gap-Schweißen - Eine neue Technologie zum Fügen von dickwandigen Bauteilen in Kraftwerken
Keßler, Benjamin; Brenner, Berndt; Dittrich, Dirk; Maier, G.; Oesterlin, H.; Bendjus, Beatrice | Journal Article |
| 2018 | Leuchtstoffbasiertes Dosimetrieverfahren für elektronenbestrahlte Verpackungsmaterialien
Heymann, Manuela
: Marschner, Uwe; Gerlach, Gerald (Gutachter); Eychmüller, Alexander (Gutachter) | Dissertation |
| 2018 | Lokale Beeinflussung des Gussgefüges durch den gezielten Einsatz von Formstoffen
Schönfeld, Katrin; Martin, Hans-Peter; Parschick, Felix; Hillmann, Susanne | Journal Article |
| 2018 | Low temperature co-fired ceramics technology for active eddy current turbocharger speed sensors
Ihle, Martin; Ziesche, Steffen; Gierth, Paul; Tuor, Andreas; Tigelaar, Jonathan; Hirsch, Oliver | Journal Article, Conference Paper |
| 2018 | Macroscopic aerogels with retained nanoscopic plasmonic properties
Kodanek, Torben; Freytag, Axel; Schlosser, Anja; Naskar, Suraj; Härtling, Thomas; Dorfs, Dirk; Bigall, Nadja Carola | Journal Article |
| 2018 | Manufacturing technologies for ultrasonic transducers in a broad frequency range
Gebhardt, Sylvia; Hohlfeld, Kai; Günther, Paul; Neubert, Holger | Conference Paper |
| 2018 | Manufacturing technologies of piezoelectric components for integration into lightweight structures
Hohlfeld, Kai; Rhein, Sebastian; Flössel, Markus; Michaelis, Alexander; Gebhardt, Sylvia | Journal Article |
| 2018 | Mechanical and Thermophysical Properties of Hardmetals at Room and Elevated Temperatures
Vornberger, Anne; Pötschke, Johannes; Gestrich, Tim; Herrmann, Mathias | Conference Paper |
| 2018 | Metal-Ceramic Material Compounds Made by Additive Manufacturing
Moritz, Tassilo; Abel, Johannes; Scheithauer, Uwe; Müller-Köhn, Axel; Weingarten, Steven | Conference Paper |
| 2018 | Micro‐electrochemical investigation of the passive behavior of thin anodic titanium oxide films on TiAlV6‐4
Langklotz, Ulrike; Noeske, Michael; Schneider, Michael | Journal Article |
| 2018 | Microstructural characteristics and performances of Cr2O3 and Cr2O3-15%TiO2 S-HVOF coatings obtained from water-based suspensions
Toma, Filofteia-Laura; Potthoff, Annegret; Barbosa, Maria Ingrid Rocha | Journal Article |
| 2018 | Modular ceramic scaffolds for individual implants
Biggemann, Jonas; Pezoldt, Marc; Stumpf, Martin; Greil, Peter; Fey, Tobias | Journal Article |
| 2018 | Multi-modal porous microstructure for high temperature fuel cell application
Wejrzanowski, T.; Haj Ibrahim, S.; Cwieka, K.; Löffler, Markus; Milewski, J.V.; Zschech, Ehrenfried; Lee, C.-G. | Journal Article |
| 2018 | Multilayer ceramics for electrocaloric cooling applications
Molin, Christian; Neumeister, Peter; Neubert, Holger; Gebhardt, Sylvia | Journal Article |
| 2018 | Multilayer Laue Lenses (MLL) with 45 mm focal length as optics for in-situ nanoindentation experiments
Kubec, Adam; Niese, Sven; Gluch, Jürgen; Rosenthal, Martin; Todt, Juraj; Keckes, Jozef; Gawlitza, Peter | Journal Article, Conference Paper |
| 2018 | Nano‐sized zeolite particles as inhibitor carrier in plasma electrolytic oxide layers on AZ31
Schneider, Michael; Kremmer, Kerstin; Tabatabai, Dominik; Fürbeth, Wolfram | Journal Article |
| 2018 | Nanomaterialien für elektrische Energiespeicher
Calgar, Burak; Fischer, Peter; Hagen, Markus; Tübke, Jens; Althues, Holger; Dörfler, Susanne; Guntow, Uwe; Schulz, Jochen; Endler, Ingolf; Fritsch, Marco; Meißner, Frank; Wolter, Mareike | Book Article |
| 2018 | Nanomaterials: Certain aspects of application, risk assessment and risk communication
Laux, Peter; Tentschert, Jutta; Riebeling, Christian; Braeuning, Albert; Creutzenberg, Otto; Epp, Astrid; Fessard, Valérie; Haas, Karl-Heinz; Haase, Andrea; Hund-Rinke, Kerstin; Jakubowski, Norbert; Kearns, Peter; Lampen, Alfonso; Rauscher, Hubert; Schoonjans, Reinhilde; Störmer, Angela; Thielmann, Axel; Mühle, Uwe; Luch, Andreas | Journal Article |
| 2018 | Nanoparticle-based impregnation of chromate-free anodizing layers for corrosion protection and adhesive bonding
Anthes, Adrian; Weidmann, Stefanie; Fürbeth, Wolfram; Kremmer, Kerstin; Schneider, Michael | Journal Article |
| 2018 | Nanoskaliges Hartmetall - Fiktion oder Realität?
Michaelis, Alexander; Pötschke, Johannes; Richter, Volkmar | Book Article |
| 2018 | Natriumionenleitende Membran, basierend auf einem Natrium-Beta'' -Aluminatsystem, sowie Verfahren zur Herstellung einer solchen
Grund, Martin; Schulz, Matthias; Weidl, Roland | Patent |
| 2018 | Neuartige Nahinfrarot-Sensoren für vielfältige Anwendungsfälle
Jahnel, Matthias; Langer, Robert; Brückner, Robert; Meerheim, Rico; Wynands, David; Härtling, Thomas; Hauptmann, Marek; Timmreck, Ronny; Leo, Karl | Conference Paper |
| 2018 | New Approach of Metal Substrate Fabrication for Metal-Supported Solid Oxide Fuel Cells
Günther, Anne; Moritz, Tassilo; Müller-Köhn, Axel; Härtel, Anja; Kusnezoff, Mihails; Fritsch, Marco; Trofimenko, Nikolai; Bremerstein, Irina; Kamptner, Andre | Conference Paper |
| 2018 | Nichtoxidische Werkstoffe für Vergasungsreaktoren
Herrmann, Mathias; Standke, Gisela; Himpel, Gert; Höhn, Sören; Heymer, Heike; Kunze, Steffen | Book Article |
| 2018 | Nonlinear effects of micro-cracks on acoustic surface and wedge waves
Rjelka, Marek; Pupyrev, Pavel D.; Köhler, Bernd; Mayer, Andreas P. | Journal Article |
| 2018 | Nonlinear effects of micro-cracks on long-wavelength symmetric Lamb waves
Rjelka, Marek; Köhler, Bernd; Mayer, Andreas | Journal Article |
| 2018 | Nonlinear ultrasonic modulation based failure warning for aluminum plates subject to fatigue loading
Kim, Yongtak; Lim, Hyung Jin; Sohn, Hoon | Journal Article |
| 2018 | Novel concept of an in-situ test system for the thermal-mechanical fatigue measurement for reliability evaluation of electronic solder joints
Metasch, René; Röllig, Mike; Naumann, Uwe; Wiesenhütter, Felix; Kaufmann, R. | Conference Paper |
| 2018 | A novel micro-double cantilever beam (micro-DCB) test in an X-ray microscope to study crack propagation in materials and structures
Kutukova, Kristina; Niese, Sven; Gelb, Jeff; Dauskardt, Reinhold; Zschech, Ehrenfried | Journal Article |
| 2018 | Novel poling method for piezoelectric 0-3 composites and transfer to series production
Eßlinger, Sophia; Geller, Sirko; Hohlfeld, Kai; Gebhardt, Sylvia; Michaelis, Alexander; Gude, Maik; Schönecker, Andreas; Neumeister, Peter | Journal Article |
| 2018 | Novel thermocouples for automotive applications
Gierth, Paul; Rebenklau, Lars; Augsburg, Klaus; Niedermeyer, Lars; Bachmann, Eric | Journal Article |
| 2018 | Numerical and experimental evaluation and optimization of ceramic foam as solar absorber - single-layer vs multi-layer configurations
Zaversky, Fritz; Aldaz, Leticia; Sánchez, Marcelino A.D.; Ávila-Marin, Antonio L.; Roldán, M.I.; Fernández-Reche, Jesús; Füssel, Alexander; Beckert, Wieland; Adler, Jörg | Journal Article |
| 2018 | On the numerical convergence and performance of different spatial discretization techniques for transient elastodynamic wave propagation problems
Tschöke, Kilian; Gravenkamp, Hauke | Journal Article |
| 2018 | On the stability of c-BN-reinforcing particles in ceramic matrix materials
Wolfrum, Anne-Kathrin; Matthey, Björn; Michaelis, Alexander; Herrmann, Mathias | Journal Article |
| 2018 | Overload-proof LTCC differential pressure sensors for high temperature applications
Goldberg, Adrian; Manhica, Birgit; Ziesche, Steffen; Partsch, Uwe | Conference Paper |
| 2018 | Oxidation und Nichtoxiden
Klemm, Hagen | Book Article |
| 2018 | Oxide multilayer thermoelectric generators
Töpfer, Jörg; Reimann, Timmy; Schulz, Thomas; Bochmann, Arne; Capraro, Beate; Barth, Stefan; Vogel, Andy; Teichert, Steffen | Journal Article |
| 2018 | Oxygen development during the ECM on SiC
Simunkova, Lenka; Junker, Nils; Schneider, Michael; Michaelis, Alexander | Conference Paper |
| 2018 | Partikel aus einem feuerfesten keramischen Werkstoff zur Beeinflussung der Rissbildung in Hochtemperaturwerkstoffen und Verfahren zu ihrer Herstellung
Aneziris, Christos; Scheithauer, Uwe | Patent |
| 2018 | Partikel aus einem feuerfesten keramischen Werkstoff zur Beeinflussung der Schadenstoleranz von Hochtemperaturwerkstoffen, und Verfahren zu ihrer Herstellung
Aneziris, Christos; Scheithauer, Uwe | Patent |
| 2018 | Performance of a new piezoceramic thick film sensor for measurement and control of cutting forces during milling
Drossel, Welf-Guntram; Gebhardt, Sylvia; Bucht, André; Kranz, Burkhard; Schneider, Jörg; Ettrichrätz, Martin | Journal Article |
| 2018 | Piezofibre composite transducers for next generation 3D USCT
Zapf, Michael; Hohlfeld, Kai; Pfistner, P.; Liberman, C.; Dongen, K.W.A. van; Gemmeke, Hartmut; Ruiter, Nicole V.; Michaelis, Alexander; Gebhardt, Sylvia | Conference Paper |
| 2018 | Plasmonic sensor system for on-site monitoring of diclofenac molecules
Steinke, Nadja; Wuchrer, Roland; Döring, Sarah; Gerlach, Gerald; Härtling, Thomas | Conference Paper |
| 2018 | Poling technologies and design optimization for integrated piezoelectric bulk transducers and piezoelectric composites
Eßlinger, Sophia; Schönecker, Andreas; Neumeister, Peter | Journal Article |
| 2018 | Polymerization driven monomer passage through monolayer chemical vapour deposition graphene
Zhang, Tao; Liao, Zhongquan; Medrano Sandonas, Leonardo; Dianat, Arezoo; Liu, Xiaoling; Xiao, Peng; Amin, Ihsan; Gutierrez, Rafael; Chen, Tao; Zschech, Ehrenfried; Cuniberti, Gianaurelio; Jordan, Rainer | Journal Article |
| 2018 | Prediction of SRAM reliability under mechanical stress induced by harsh environments
Warmuth, Jens; Giering, Kay-Uwe; Lange, André; Clausner, André; Schlipf, Simon; Kurz, Gottfried; Otto, Michael; Paul, Jens; Jancke, Roland; Aal, Andreas; Gall, Martin; Zschech, Ehrenfried | Conference Paper |
| 2018 | Production of Multimaterial Components by Material Extrusion - Fused Filament Fabrication (ME-FFF)
Kukla, Christian; Cano, Santiago; Moritz, Tassilo; Müller-Köhn, Axel; Günther, Anne; Hampel, Stefan; Holzer, Clemens | Conference Paper |
| 2018 | Properties of Additive Manufactured Hardmetal Components produced by Fused Filament Fabrication (FFF)
Berger, Christian; Abel, Johannes; Pötschke, Johannes; Moritz, Tassilo | Conference Paper |
| 2018 | Prospect of open-cell solid foams for floating-platform multiphase reactor applications - maldistribution susceptibility and hydrodynamic behavior
Dashliborun, Amir Motamed; Füssel, Alexander; Larachi, Faical | Journal Article |
| 2018 | Quantitative analysis of backscattered electron (BSE) contrast using low voltage scanning electron microscopy (LVSEM) and its application to Al0.22Ga0.78N/GaN layers
Garitagoitia, Maria Aranzazu; Rosenkranz, Rüdiger; Löffler, M.; Clausner, André; Standke, Yvonne; Zschech, Ehrenfried | Journal Article |
| 2018 | Quasi-adiabatic calorimeter for direct electrocaloric measurements
Sanlialp, Mehmet; Shvartsman, Vladimir V.; Faye, Romain; Karabasov, Maksim O.; Molin, Christian; Gebhardt, Sylvia; Defay, Emmanuel; Lupascu, Doru C. | Journal Article |
| 2018 | Reaktionstechnische Untersuchung der Verbrennungsprozesse in porösen inerten Medien aus Siliziumkarbid
Marschallek, Felix
: Michaelis, Alexander (Gutachter); Beckmann, Michael (Gutachter) | Dissertation |
| 2018 | Recent insights into the electrochemical behavior of blended lithium insertion cathodes: A review
Heubner, Christian; Liebmann, Tobias; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2018 | Reliability analysis of encapsulated components in 3D-circuit board integration
Schwerz, Robert; Röllig, Mike; Wolter, Klaus-Jürgen | Conference Paper |
| 2018 | Scalable fabrication of nanostructured tin oxide anodes for high-energy lithium-ion batteries
Heubner, Christian; Liebmann, Tobias; Voigt, Karsten; Weiser, Mathias; Matthey, Björn; Junker, Nils; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2018 | Schallemissionsmessungen während der Durchführung von Zugversuchen an GFK-Proben
Weihnacht, Bianca; Schulze, Eberhard; Pietzsch, Alexander; Schubert, Lars; Vandenbrande, A.; Borchers, K.-W.; Cerbe, Burkhard | Presentation |
| 2018 | Schutzschichten für keramische Faserverbundwerkstoffe
Kunz, Willy; Schönfeld, Katrin; Klemm, Hagen | Journal Article |
| 2018 | Self-Sensing Actuators Based on Ferromagnetic Shape Memory Alloys
Ehle, Fabian; Neumeister, Peter; Keitel, Uwe; Neubert, Holger | Conference Paper |
| 2018 | Semi-empirical master curve concept describing the rate capability of lithium insertion electrodes
Heubner, Christian; Seeba, Jann; Liebmann, Tobias; Nickol, Alexander; Börner, Stefan; Fritsch, Marco; Nikolowski, Kristian; Wolter, M.; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2018 | Sensorsystem zur Charakterisierung des Zustandes von in einem Kultivierungsgefäß enthaltenen Proben einer heterogenen Biomassestruktur
Bendjus, Beatrice; Cikalova, Ulana; Eigner, Jürgen; Reichelt, Matthias; Schott, Carolin; Steingroewer, Juliane; Werner, Thomas | Patent |
| 2018 | Setup für Ermüdungsversuche an elektronischen Komponenten unter kombinierten Temperatur- und Vibrationslasten
Meier, Karsten; Metasch, René; Röllig, Mike; Bock, K. | Conference Paper |
| 2018 | Si amorphization by focused ion beam milling: Point defect model with dynamic BCA simulation and experimental validation
Huang, J.; Löffler, Markus; Mühle, Uwe; Möller, Wolfhard; Mulders, Johannes J.L.; Kwakman, Laurens; Dorp, Willem F. van; Zschech, Ehrenfried | Journal Article |
| 2018 | Siliciumcarbid gebundene Diamantwerkstoffe - Herstellung, Mikrostruktur und Eigenschaften
Matthey, Björn
: Michaelis, Alexander (Gutachter); Vollstädt, Heiner (Gutachter); Herrmann, Mathias (Betreuer) | Dissertation |
| 2018 | Siliciumnitrid
Herrmann, Mathias | Book Article |
| 2018 | Sintering behavior, microstructure and thermoelectric properties of calcium cobaltite thick films for transversal thermoelectric multilayer generators
Schulz, Thomas; Reimann, Timmy; Bochmann, Arne; Vogel, Andy; Capraro, Beate; Mieller, Björn; Teichert, Steffen; Töpfer, Jörg | Journal Article |
| 2018 | Solder joint fatigue analysis under combined thermal and vibration loading
Meier, Karsten; Röllig, Mike; Liu, Y.; Bock, K. | Conference Paper |
| 2018 | Solid state sintered nanoscaled hardmetals and their properties
Pötschke, Johannes; Säuberlich, Tino; Vornberger, Anne; Meese-Marktscheffel, J.A. | Journal Article |
| 2018 | Structural integration of sensors/actuators by laser beam melting for tailored smart components
Töppel, Thomas; Lausch, Holger; Brand, Michael; Hensel, Eric; Arnold, Michael; Rotsch, Christian | Journal Article |
| 2018 | Studying the progress of sintering in ferrous powder compacts by in-situ measuring the thermal conductivity
Danninger, Herbert; Leitner, Gert; Gierl-Mayer, Christian | Journal Article |
| 2018 | Sub 25 nm focusing with a long working distance using multilayer Laue lenses
Kubec, Adam; Niese, Sven; Rosenthal, M.; Gluch, Jürgen; Burghammer, M.; Gawlitza, Peter; Keckes, J.; Leson, Andreas | Journal Article, Conference Paper |
| 2018 | Sub-surface assessment of hydrothermal ageing in zirconia-containing femoral heads for hip joint applications
Grémillard, Laurent; Chêvalier, Jérôme; Martin, Laura; Douillard, Thierry; Begand, Sabine; Hans, K.; Oberbach, Thomas | Journal Article |
| 2018 | Surface integrity in ultra-precision grinding of transparent ceramics
Klocke, Fritz; Dambon, Olaf; Bletek, Thomas; Höche, Thomas; Naumann, Falk; Hutzler, Thomas | Journal Article, Conference Paper |
| 2018 | Sustainable synthesis of high-surface-area graphite oxide via dry ball milling
Mahmoud, Alaa El Din; Stolle, Achim; Stelter, Michael | Journal Article |
| 2018 | Synthesis and shaping scale-up study of functionalized UiO-66 MOF for ammonia air purification filters
Khabzina, Yoldes; Dhainaut, Jeremy; Ahlhelm, Matthias; Richter, Hans-Jürgen; Reinsch, Helge; Stock, Norbert; Farrusseng, David | Journal Article |
| 2018 | Techno-economic analysis of a co-electrolysis-based synthesis process for the production of hydrocarbons
Herz, Gregor; Reichelt, Erik; Jahn, Matthias | Journal Article |
| 2018 | Theoretical optimization of electrode design parameters of Si based anodes for lithium-ion batteries
Heubner, Christian; Langklotz, Ulrike; Michaelis, Alexander | Journal Article |
| 2018 | Thermal behaviour of cermets and hardmetals during debinding and sintering
Gestrich, Tim; Kaiser, Arno; Pötschke, Johannes; Meinl, Juliane; Höhn, Sören | Journal Article |
| 2018 | Thermo-Mechanical Measurement Approach of Ag-sintered Joints for Power Electronics
Metasch, René; Meier, Karsten; Röllig, Mike | Conference Paper |
| 2018 | Thin bioactive Zn substituted hydroxyapatite coating deposited on ultrafine-grained titanium substrate
Prosolov, K.A.; Belyavskaya, O.A.; Muehle, U.; Sharkeev, Y.P. | Journal Article |
| 2018 | Time-resolved microscopy of fs-laser-induced heat flows in glasses
Bonse, Jörn; Seuthe, Thomas; Grehn, Moritz; Eberstein, Markus; Rosenfeld, Arkadi; Mermillod-Blondin, Alexandre | Journal Article |
| 2018 | Titanium oxynitride coatings deposited by magnetron sputtering for improvement of cardiovascular stent design
Duta, Oana Cristina; Ficai, Denisa; Ficai, Anton; Andronescu, Ecaterina; Beshchasna, Nataliia; Saqib, Muhammad; Opitz, Jörg; Kraśkiewicz, Honorata; Wasyluk, Łukasz; Kuzmin, Oleg; Pichugin,Vladimir | Conference Paper |
| 2018 | Umformbare keramische und/oder pulvermetallurgische Grünfolien und Verfahren zur Umformung dieser keramischen und/oder pulvermetallurgischen Grünfolien
Moritz, Tassilo; Schwarzer, Eric | Patent |
| 2018 | Untersuchungen zur Charakteristik und Applikationen des EsB Detektors
Garitagoitia Cid, María Aránzazu
: Rosenkranz, Rüdiger (Betreuer); Zschech, Ehrenfried (Betreuender Hochschullehrer); Bartha, Johann W. (Vorsitzender) | Dissertation |
| 2018 | Validation of different SAC305 material models calibrated on isothermal tests using in-situ TMF measurement of thermally induced shear load
Kuczynska, Marta; Schafet, Natalja; Becker, Ulrich; Metasch, René; Röllig, Mike; Kabakchiev, Alexander; Weihe, Stefan | Journal Article |
| 2018 | Ventil aus einem keramischen Werkstoff und ein Verfahren zu seiner Herstellung
Goldberg, Adrian; Partsch, Uwe; Ziesche, Steffen | Patent |
| 2018 | Verbundwerkstoffe mit sehr hoher Verschleißbeständigkeit
Adler, Jörg; Füssel, Alexander; Füssel, Thomas; Nelle, Stefan; Standke, Gisela | Patent |
| 2018 | Verfahren und Vorrichtung zur Aufbereitung von Abfallprodukten
Wufka, André; Faßauer, Burkhardt; Georgi, Hartmut; Müller, Pascal; Münch, Christiane; Weile, Frank | Patent |
| 2018 | Verfahren zum Auswerten eines digitalen Messsignals einer Wirbelstromprüfanordnung
Joneit, Dieter | Patent |
| 2018 | Verfahren zur Behandlung von Geothermalfluid- oder Formationswasserströmen durch kontinuierliche elektrochemische Abtrennung reduzierbarer Metall- und/ oder Metalloidionen aus dem Förderstrom
Friedrich, Hans-Jürgen; Hielscher, Mario; Hinrichs, Torsten; Rott, Hans-Jürgen | Patent |
| 2018 | Verfahren zur Bestimmung von mechanischen Spannungen in Substraten oder Schaltungsträgern, die mit einem keramischen Werkstoff gebildet sind
Bendjus, Beatrice; Cikalova, Ulana; Münch, Stefan; Röllig, Mike | Patent |
| 2018 | Verfahren zur Herstellung einer elektrochemischen Zelle sowie eine mit dem Verfahren hergestellte elektrochemische Zelle
Freytag, Christian; Kusnezoff, Mihails; Nikolowski, Kristian; Partsch, Uwe; Schilm, Jochen; Wolter, Mareike | Patent |
| 2018 | Verfahren zur Herstellung polykristalliner transparenter Formteile
Kemnitz, Erhard; Krahl, Thoralf; Reichel, Uwe | Patent |
| 2018 | Verfahren zur Herstellung von Hartmetallkörpern mittels 3D-Druck
Pötschke, Johannes; Richter, Hans-Jürgen | Patent |
| 2018 | Vorrichtung zur additiven Herstellung dreidimensionaler Bauteile
Abel, Johannes; Moritz, Tassilo; Scheithauer, Uwe; Schwarzer, Eric; Weingarten, Steven | Patent |
| 2018 | Vorrichtung zur Durchführung von Biegeversuchen an plattenförmigen Proben
Clausner, André; Gall, Martin; Macher, Frank; Sander, Christoph; Zschech, Ehrenfried | Patent |
| 2018 | Vorrichtung zur in situ Überprüfung der Qualität bei der generativen Fertigung von Bauteilen
Brosius, David Maximilian; Hillmann, Susanne; Krüger, Peter | Patent |
| 2018 | Warum nicht mal in Keramik? Keramische Lösungen für den Maschinenbau
Freund, Susanne | Journal Article |
| 2018 | Wear behavior of diamond-silicon nitride composites sintered with FAST/SPS
Wolfrum, Anne-Kathrin; Quitzke, Caroline; Matthey, Björn; Herrmann, Mathias; Michaelis, Alexander | Journal Article |
| 2018 | Wirbelstromprüfung in der CFK-Fertigung
Bardl, Georg; Kupke, Richard; Heuer, Henning; Cherif, Chokri | Journal Article |
| 2018 | Zerstörungsfreie Prüfung
Hillmann, Susanne; Wunderlich, Christian; Heuer, Henning; Köhler, Bernd; Krüger, Peter; Opitz, Jörg; Stephan, Mareike; Tschöpe, Constanze; Wolf, Christian | Book Article |
| 2018 | Zuverlässigkeitsanalyse von gekapselten Bauelementen in der 3D-Leiterplattenintegration
Schwerz, Robert | Dissertation |
| 2017 | 13th International Symposium on ElectroChemical Machining Technology, INSECT 2017. Proceedings
: Michaelis, A.; Schneider, M. | Conference Proceedings |
| 2017 | 3D-Binder-Jetting von Hartmetallen
Pötschke, Johannes; Berger, Christian; Richter, Hans-Jürgen; Moritz, Tassilo | Journal Article |
| 2017 | Accelerated life time measurement with in-situ force and displacement monitoring during thermal cycling on solder joints
Metasch, René; Röllig, Mike; Kuczynska, Marta; Schafet, Natalja; Becker, Ulrich; Meier, Karsten; Panchenko, Iuliana | Conference Paper |
| 2017 | Additive manufacturing of hardmetals
Pötschke, Johannes; Berger, Christian; Richter, Hans-Jürgen; Scheithauer, Uwe; Weingarten, Steven | Conference Paper |
| 2017 | Advances in solid oxide fuel cells and electronic ceramics II
: Kusnezoff, Mihails (Hrsg.); Bansal, Narottam P. (Hrsg.); Shimamura, Kiyoshi (Hrsg.) | Conference Proceedings |
| 2017 | Advances in solid oxide fuel cells and electronic ceramics II. Preface
Kusnezoff, Mihails; Bansal, Narottam P.; Shimamura, Kiyoshi | Conference Paper |
| 2017 | Analysis of the effect of TSV-induced stress on devices performance by direct strain and electrical measurements and FEA simulations
Kteyan, Armen; Mühle, Uwe; Gall, Martin; Sukharev, Valeriy; Radojcic, Riko; Zschech, Ehrenfried | Journal Article |
| 2017 | Anodic dissolution of solid-state sintered silicon carbide at high current densities
Schneider, Michael; Schubert, Nora; Michaelis, Alexander | Journal Article |
| 2017 | Applications of metal foam as catalyst carrier
Walther, Gunnar; Gaitzsch, Uwe; Büttner, Tilo; Kieback, Bernd; Weißgärber, Thomas; Kolvenbach, Robin; Lincke, Marc | Conference Paper |
| 2017 | Area-selective atomic layer deposition of Ru on electron-beam-written Pt(C) patterns versus SiO2 substratum
Junige, Marcel; Löffler, Markus; Geidel, Marion; Albert, Matthias; Bartha, Johann W.; Zschech, Ehrenfried; Rellinghaus, Bernd; Dorp, Willem F. van | Journal Article |
| 2017 | Atomic layer etching of gallium nitride (0001)
Kauppinen, Christoffer; Khan, Sabbir Ahmed; Sundqvist, Jonas; Suyatin, Dmitry B.; Suihkonen, Sami; Kauppinen, Esko I.; Sopanen, Markku | Journal Article |
| 2017 | Auslegungsplattform für keramische Schraubendruckfedern
Beckert, Wieland; Stockmann, Jens; Koplin, Christof | Conference Paper |
| 2017 | An automated non-destructive testing system for seam bondings in automotive serial production
Klausing, Maximilian; Heuer, Henning | Journal Article |
| 2017 | Autonomer Flammenionisationsdetektor für den Explosionsschutz in Kanalisationsnetzen
Kuipers, Winfred; Förster, Jan; Koch, Christian; Goldberg, Adrian; Lenz, Christian; Ziesche, Steffen; Bechtold, F.; Jurkow, Dominik; Ruffmann, Bastian; Maurer, Peter; Großklags, Frank; Müller, Bettina | Journal Article |
| 2017 | Battery - Determination and Forecast via Synergetics
Haß, Ernst-Christoph; Knicker, Katharina; Sydow, Uwe; Schulz, Matthias; Plath, Peter J. | Book Article |
| 2017 | Biogas as an alternative carbon source for the production of waxes
Herz, Gregor; Reichelt, Erik; Jahn, Matthias | Conference Paper |
| 2017 | Carbide-oxide composites made from nanoscaled tungsten carbide, alumina and zirconia powders
Pötschke, Johannes; Berger, Christian; Vornberger, Anne | Conference Paper |
| 2017 | Carrier mobility shift in advanced silicon nodes due to chip-package interaction
Sukharev, Valeriy; Choy, Jun-Ho; Kteyan, Armen; Hovsepyan, Henrik; Nakamoto, Mark; Zhao, Wei; Radojcic, Riko; Mühle, Uwe; Zschech, Ehrenfried | Journal Article |
| 2017 | CerAMfacturing, Development of ceramic and multi material components by additive manufacturing methods for personalized medical products, H2020
Moritz, Tassilo | Journal Article |
| 2017 | Ceramic-based 4D components: Additive Manufacturing (AM) of ceramic-based functionally graded materials (FGM) by thermoplastic 3D printing (T3DP)
Scheithauer, Uwe; Weingarten, Steven; Johne, Robert; Schwarzer, Eric; Abel, Johannes; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Journal Article |
| 2017 | Ceramics with high electrical conductivity at room temperature
Martin, Hans-Peter; Feng, Bing; Michaelis, Alexander | Presentation |
| 2017 | Characterizing micro-crack distributions with nonlinear acoustic surface and wedge waves
Rjelka, Marek; Köhler, Bernd; Pupyrev, Pavel; Mayer, Andreas | Conference Paper |
| 2017 | Chemische Gasphasenabscheidung. Beschichtungen
Gäbler, J.; Brand, C.; Paschke, H.; Endler, Ingolf | Book Article |
| 2017 | Co-electrolysis with CFY-stacks
Megel, Stefan; Dosch, Christian; Rothe, Stefan; Folgner, Christoph; Trofimenko, Nikolai; Rost, Axel; Kusnezoff, Mihails; Reichelt, Erik; Jahn, Matthias; Michaelis, Alexander; Bienert, Christian; Brandner, Marco | Conference Paper |
| 2017 | Combination of Tape Casting and Paper Technology for Producing Ceramic-Metal Composites and Their further Processing
Härtel, Anja; Richter, Hans-Jürgen; Moritz, Tassilo | Journal Article |
| 2017 | Combining flash sintering/sinterforging with hybrid FAST/SPS technology for oxide and non-oxide materials
Hennicke, Jürgen; Räthel, Jan; Kessel, Tobias | Conference Paper |
| 2017 | Comparison of direct electrocaloric characterization methods exemplified by 0.92 Pb(Mg1/3Nb2/3)O3-0.08 PbTiO3 multilayer ceramics
Molin, Christian; Peräntie, Jani; Goupil, Florian le; Weyland, Florian; Sanlialp, Mehmet; Stingelin, Natalie; Novak, Nikola; Lupascu, Doru C.; Gebhardt, Sylvia | Journal Article |
| 2017 | Corrosion behaviour of bismuth-containing gold thick-film electrodes
Junker, Nils; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2017 | Corrosion stability of Sialon-based materials in acids and basic solutions
Nickol, Alexander; Wolfrum, Anne-Kathrin; Kunz, Willy; Michaelis, Alexander; Herrmann, Mathias | Journal Article |
| 2017 | Crack detection of ceramics based on laser speckle photometry
Bendjus, Beatrice; Cikalova, Ulana; Chen, Lili | Journal Article |
| 2017 | Critical impact of chloride containing reference electrodes on electrochemical measurements
Lämmel, Christoph; Heubner, Christian; Liebmann, Tobias; Schneider, Michael | Journal Article |
| 2017 | Deep drawing of ceramic green tapes - A promising technology for producing new lightweight non-planar kiln furniture
Schwarzer, Eric; Scheithauer, Uwe; Brosche, Maximilian; Richter, Hans-Jürgen; Moritz, Tassilo | Journal Article |
| 2017 | Degradation of endocrine disruptor bisphenol A by ultrasound-assisted electrochemical oxidation in water
Dietrich, Matz; Franke, Marcus; Stelter, Michael; Bräutigam, Patrick | Journal Article |
| 2017 | Dependencies between internal structure and mechanical properties of spray dried granules - experimental study and DEM simulation
Eckhard, Susanna; Fries, Manfred; Antonyuk, Sergiy; Heinrich, Stefan | Journal Article |
| 2017 | Derivation and application of a generalized correlation for mass transfer in packed beds
Reichelt, Erik; Jahn, Matthias; Lange, Rüdiger | Journal Article |
| 2017 | Design and evaluation of a Fischer-Tropsch process for the production of waxes from biogas
Herz, Gregor; Reichelt, Erik; Jahn, Matthias | Journal Article |
| 2017 | Design and evaluation of a power-to-liquid process for the production of valuable hydrocarbons from CO2 and H2O
Herz, Gregor; Reichelt, Erik; Jahn, Matthias | Conference Paper |
| 2017 | Determination of defect sizes with the help of structural-health-monitoring methods based on guided waves
Tschöke, Kilian; Weihnacht, Bianca; Gaul, Tobias; Schulze, Eberhard; Schubert, Lars; Neubeck, Robert | Conference Paper |
| 2017 | Development and application of binary suspensions in the ternary system Cr2O3-TiO2-Al2O3 for S-HVOF spraying
Kratzsch, Robert; Potthoff, Annegret; Kulissa, Nick; Kunze, Oliver; Barbosa, Maria Manuel; Toma, Filofteia-Laura | Conference Paper |
| 2017 | Development of a highly efficient micro-scale CHP system based on fuel-flexible gasification and a SOFC
Brunner, Thomas; Ramerstorfer, Christian; Obernberger, Ingwald; Kerschbaum, Michael; Aravind, P.V.; Makkus, Robert; Megel, Stefan; Hauth, Martin; Seidl, Michael; Weißensteiner, Stefan; Götz, Thomas; Zappa, William | Conference Paper |
| 2017 | Development of a SOFC Power Generator for the Indian Market
Pfeifer, Thomas; Chakradeo, Amar; Ahire, Nitin; Baade, Jens; Barthel, Markus; Dosch, Christian; Näke, Ralf; Hartmann, Mathias | Journal Article, Conference Paper |
| 2017 | Direct influence of titanium and zirconia particles on the morphology and functionality of mature human osteoclasts
Pasold, Juliane; Markhoff, Jana; Tillmann, Jenny; Krogull, Martin; Pisowocki, Phillip; Bader, Rainer | Journal Article |
| 2017 | Dispersion of nanomaterials in aqueous media: Towards protocol optimization
Kaur, Inder; Ellis, Laura-Jayne; Romer, Isabella; Tantra, Ratna; Carriere, Marie; Allard, Soline; Mayne-L'Hermite, Martine; Minelli, Caterina; Unger, Wolfgang; Potthoff, Annegret; Rades, Steffi; Valsami-Jones, Eugenia | Journal Article |
| 2017 | Doping of graphene induced by boron/silicon substrate
Dianat, Arezoo; Liao, Zhongquan; Gall, Martin; Zhang, Tao; Gutierrez, Rafael; Zschech, Ehrenfried; Cuniberti, Gianaurelio | Journal Article |
| 2017 | Droplet-based additive manufacturing of hard metal components by thermoplastic 3D printing (T3DP)
Scheithauer, Uwe; Pötschke, Johannes; Weingarten, Steven; Schwarzer, Eric; Vornberger, Anne; Moritz, Tassilo; Michaelis, Alexander | Journal Article |
| 2017 | Editorial
Zschech, Ehrenfried | Journal Article |
| 2017 | The effect of manufacturing conditions on discontinuity population and fatigue fracture behavior in carbon/epoxy composites
Hakim, I.; Laquai, R.; Walter, D.; Mueller, B.; Graja, P.; Meyendorf, N.; Donaldson, S. | Conference Paper |
| 2017 | Effect of membranes in exhaust particulate filtration
Adler, Jörg; Petasch, Uwe | Conference Paper |
| 2017 | Effect on the integration of piezoceramic composites into structural components on their poling condition and polarizability
Hohlfeld, Kai; Eßlinger, Sophia; Eydam, Agnes; Winkler, Anja; Weber, Tony; Gude, Maik; Modler, Niels; Gerlach, Gerald; Suchaneck, Gunnar; Michaelis, Alexander; Schönecker, Andreas; Gebhardt, Sylvia; Neumeister, Peter | Conference Paper |
| 2017 | Efficient hydrogen production on MoNi4 electrocatalysts with fast water dissociation kinetics
Zhang, Jian; Wang, Tao; Liu, Pan; Liao, Zhongquan; Liu, Shaohua; Zhuang, Xiaodong; Chen, Mingwei; Zschech, Ehrenfried; Feng, Xinliang | Journal Article |
| 2017 | Einfluss der Anwesenheit von faserigen Partikeln auf die Strömungsgeschwindigkeiten in gerührten Systemen
Lomtscher, Annett; Jobst, Karin; Kraume, Matthias | Journal Article |
| 2017 | Einsatz von strohartigen Biomassen in Biogasanlagen - Stand und Perspektiven
Schwarz, Björn; Fleschhut, Monika; Baye, Dietrich | Conference Paper |
| 2017 | Electrochemical Machining
Schneider, Michael; Lohrengel, Manuel | Book Article |
| 2017 | Electrochemical machining of a solid-state sintered ceramic - a parameter study
Schneider, Michael; Safonowa, Elena; Junker, Nils; Schubert, Nora; Michaelis, Alexander | Journal Article |
| 2017 | Electrochemical studies of the ECM on chromium
Simunkova, Lenka; Schneider, Michael | Conference Paper |
| 2017 | Electrochemical surface modification of titanium based material with detonation nanodiamonds for implant applications
Shaikh, Afnan Qurban
: Cuniberti, Gianaurelio (Gutachter); Opitz, Jörg (Betreuer); Michaelis, Alexander (Gutachter) | Dissertation |
| 2017 | An embedded system for acoustic pattern recognition
Tschöpe, Constanze; Duckhorn, Frank; Richter, Christian; Blüthgen, Peter; Wolff, Matthias | Conference Paper |
| 2017 | Enabling energy efficiency and polarity control in germanium nanowire transistors by individually gated nanojunctions
Trommer, Jens; Heinzig, André; Mühle, Uwe; Löffler, Markus; Winzer, Annett; Jordan, Paul M.; Beister, Jürgen; Baldauf, Tim; Geidel, Marion; Adolphi, Barbara; Zschech, Ehrenfried; Mikolajick, Thomas; Weber, Walter Michael | Journal Article |
| 2017 | Enhancements on fast sintering systems promote transfer from the lab to industrial applications
Hennicke, Jürgen; Kessel, Tobias; Räthel, Jan | Conference Paper |
| 2017 | Entwicklung funktioneller Metall-Keramik-Verbundfolien unter Anwendung papiertechnologischer Verfahren
Slawik, Tim
: Michaelis, Alexander (Gutachter); Großmann, Harald J. (Gutachter); Aneziris, Christos G. (Gutachter) | Dissertation |
| 2017 | Entwicklung von Cr2O3-Hochleistungsschichten durch thermisches Spritzen mit Suspensionen
Toma, Filofteia-Laura; Potthoff, Annegret; Langner, Stefan; Kulissa, Nick; Trache, Richard | Journal Article |
| 2017 | Entwicklung von Cr2O3-Hochleistungsschichten durch thermisches Spritzen mit Suspensionen
Toma, Filofteia-Laura; Langner, Stefan; Kulissa, Nick; Trache, Richard; Potthoff, Annegret | Journal Article |
| 2017 | Entwicklungsperspektiven für Zellformate von Lithium-Ionen-Batterien in der Elektromobilität
Hettesheimer, Tim; Thielmann, Axel; Neef, Christoph; Möller, Kai-Christian; Wolter, Mareike; Lorentz, Vincent; Gepp, Markus; Wenger, Martin; Prill, Torben; Zausch, Jochen; Kitzler, Peter; Montnacher, Joachim; Miller, Martin; Hagen, Markus; Fanz, Patrik; Tübke, Jens | Study |
| 2017 | Evaluation of soft chemistry methods to synthesize Gd-doped CaMnO3-δ with improved thermoelectric properties
Löhnert, Romy; Stelter, Michael; Töpfer, Jörg | Journal Article |
| 2017 | Experimental determination of the Young's modulus of various electronic packaging materials
Krämer, Frank; Röllig, Mike; Metasch, René; Wiese, Steffen; Al Ahmar, Joseph; Meier, Karsten | Conference Paper |
| 2017 | Experimental investigation on adsorption and surface characteristics of salt hydrates and hydrophobic porous matrix based composites
Laß-Seyoum, Asnakech; Borozdenko, D.; Friedrich, T.; Schönfeld, Katrin; Adler, Jörg; Mack, S. | Journal Article |
| 2017 | Extraction of depth profiles of third order elastic constants in cracked media
Rjelka, Marek; Köhler, Bernd; Mayer, Andreas | Conference Paper |
| 2017 | Extrusion and tape casting based production of new lightweight kiln furniture with non-planar surface
Scheithauer, Uwe; Schwarzer, Eric; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Conference Paper |
| 2017 | Extrusionsverfahren und Extrusionsvorrichtung zur Herstellung eines mit einem Boden verschlossenen Keramikrohres
Hofacker, Martin; Kiesel, Lutz | Patent |
| 2017 | Fabrication of a transversal multilayer thermoelectric generator with substituted calcium manganite
Reimann, Timmy; Bochmann, Arne; Vogel, Andy; Capraro, Beate; Teichert, Steffen; Töpfer, Jörg | Journal Article |
| 2017 | FAST/Flash: A combination of FAST/SPS and flash sintering
Räthel, Jan; Herrmann, Mathias; Hennicke, Jürgen; Kirchner, René | Presentation |
| 2017 | Fatigue measurement setup under combined thermal and vibration loading on electronic SMT assembly
Meier, Karsten; Metasch, René; Röllig, Mike; Bock, Karlheinz | Conference Paper |
| 2017 | Festkörperaktoren mit neuen Eigenschaften auf der Basis von magnetischen Formgedächtnislegierungen
Neubert, Holger; Böhm, Andrea | Journal Article |
| 2017 | Fischer-Tropsch to higher alcohols
Schaller, Max Rudolf; Reichelt, Erik; Fischer, Nico; Claeys, Michael; Jahn, Matthias | Conference Paper |
| 2017 | Fraunhofer Institute for Ceramic Technologies and Systems. Annual Report 2016/2017
| Annual Report |
| 2017 | Fraunhofer-Institut für Keramische Technologien und Systeme. Jahresbericht 2016/2017
| Annual Report |
| 2017 | From the sea to the laboratory: Characterization of microplastic as prerequisite for the assessment of ecotoxicological impact
Potthoff, Annegret; Oelschlägel, Kathrin; Schmitt-Jansen, Mechthild; Rummel, Christoph Daniel; Kühnel, Dana | Journal Article |
| 2017 | Funktionalisierte 3D-Keramikkomponenten durch Kombination von Mehrlagenkeramik und Keramikspritzguss
Ziesche, Steffen; Lenz, Christian; Müller-Köhn, Axel | Conference Paper |
| 2017 | Fused-Filament-Fabrication (FFF): A promising technique for large ceramic parts made of a variety of materials - challenges, approaches, perspectives
Abel, Johannes; Scheithauer, Uwe; Klemm, Hagen; Moritz, Tassilo; Michaelis, Alexander | Presentation |
| 2017 | Generalized correlations for mass transfer and pressure drop in fiber-based catalyst supports
Reichelt, Erik; Jahn, Matthias | Journal Article |
| 2017 | Generative Fertigung von Sinterglaskörpern für Glasdurchführungen durch 3D-Drucken
Nicolai, Katja
: Rädlein, Edda (Akademischer Betreuer); Michaelis, Alexander (Gutachter); Bergmann, Jean Pierre (Gutachter) | Dissertation |
| 2017 | Glass-carbon-composites for heating elements manufactured by 2C-PIM
Mannschatz, Anne; Müller-Köhn, Axel; Rost, Axel; Schilm, Jochen; Moritz, Tassilo; Michaelis, Alexander | Journal Article |
| 2017 | Grain growth inhibition in ultrafine hardmetals
Pötschke, Johannes; Richter, Volkmar; Gestrich, Tim; Säuberlich, Tino; Meese-Marktscheffel, Juliane | Journal Article |
| 2017 | Grain Growth Inhibition of Hardmetals During Initial Heat-Up
Pötschke, Johannes; Gestrich, Tim; Richter, Volkmar | Conference Paper |
| 2017 | Greeting of the programming committee of the 93rd german ceramic society annual meeting and symposium on high-performance ceramics 2018
Michaelis, Alexander; Voigt, Ingolf; Zins, Michael | Abstract |
| 2017 | Herstellung und Charakterisierung piezokeramischer Komponenten und daraus abgeleiteter Piezokomposite
Hohlfeld, Kai
: Michaelis, Alexander (Gutachter); Drossel, Welf-Guntram (Gutachter); Gebhardt, Sylvia (Betreuer) | Dissertation |
| 2017 | Herstellung von funktionellen, hybriden keramik-basierten Komponenten durch Kombination additiver und konventioneller Fertigungsverfahren
Scheithauer, Uwe; Schwarzer, Eric; Günther, Paul; Ahlhelm, Matthias; Gradmann, Rena; Pohl, Markus; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Conference Paper |
| 2017 | Hierarchical structures of functionalized Detonation NanoDiamonds (DNDs) for biomedical applications
Dennison, Nicholas Robert
: Opitz, Jörg (Betreuer); Römhildt, Lotta (Betreuer) | Master Thesis |
| 2017 | Hierarchical surface patterning of Ni- and Be-free Ti- and Zr-based bulk metallic glasses by thermoplastic net-shaping
Sarac, Baran; Bera, Supriya; Balakin, Sascha; Stoica, Mihai; Cǎlin, Mariana; Eckert, Jürgen | Journal Article |
| 2017 | High pressure adsorption, permeation and swelling of carbon membranes - measurements and modelling at up to 20 MPa
Kruse, Nicolas; Schießer, Yuliya; Reger-Wagner, Norman; Richter, Hannes; Voigt, Ingolf; Braun, Gerd; Repke, Jens Uwe | Journal Article |
| 2017 | High-flux carbon molecular sieve membranes for gas separation
Richter, Hannes; Voss, Hartwig; Kaltenborn, Nadine; Kämnitz, Susanne; Wollbrink, Alexander; Feldhoff, Armin; Caro, Jürgen; Roitsch, Stefan; Voigt, Ingolf | Journal Article |
| 2017 | Highest UV-vis transparency of MgAl2O4 spinel ceramics prepared by hot pressing with LiF
Wätzig, Katja; Hutzler, Thomas | Journal Article |
| 2017 | Hot gas stability of various ceramic matrix composites
Klemm, Hagen; Kunz, Willy; Wamser, T.; Rüdinger, Arne; Weiss, R.A.; Lauer, A.; Wilhelmi, C.; Machry, T.; Hofmann, S.; Koch, D. | Conference Paper |
| 2017 | Human α-thrombin detection platform using aptamers on a silicon nanowire field-effect transistor
Römhildt, Lotta; Zörgiebel, Felix; Ibarlucea, Bergoi; Vahdatzadeh, Maryam; Baraban, Larysa; Cuniberti, Gianaurelio; Pregl, Sebastian; Weber, Walter M.; Mikolajick, Thomas; Opitz, Jörg | Conference Paper |
| 2017 | HVOF- and HVAF-sprayed Cr3C2-NiCr coatings deposited from feedstock powders of spherical morphology: Microstructure formation and high-stress abrasive wear resistance up to 800 °C
Janka, Leo; Norpoth, Jonas; Trache, Richard; Thiele, Sven; Berger, Lutz-Michael | Journal Article |
| 2017 | Hybride Materialmodellierung für ferroelektroelastische Keramiken
Stark, Sebastian
: Balke, Herbert (Gutachter); Kuna, Meinhard (Gutachter); Michaelis, Alexander (Promotionskommission) | Dissertation |
| 2017 | Implementierung eines Sintermodells in ANSYS
Stark, Sebastian; Neumeister, Peter | Presentation |
| 2017 | The importance of shear thinning, thixotropic and viscoelastic properties of thick film pastes to predict effects on printing performance
Reinhardt, Kathrin; Hofmann, Nancy; Eberstein, Markus | Conference Paper |
| 2017 | In-situ preparation and electrochemical characterization of submicron sized NaFePO4 cathode material for sodium-ion batteries
Heubner, Christian; Heiden, Sebastian; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2017 | In-Situ Stretching Patterned Graphene Nanoribbons in the Transmission Electron Microscope
Liao, Zhongquan; Sandonas, Leonardo Medrano; Zhang, Tao; Gall, Martin; Dianat, Arezoo; Gutierrez, Rafael; Mühle, Uwe; Gluch, Jürgen; Jordan, Rainer; Cuniberti, Gianaurelio; Zschech, Ehrenfried | Journal Article |
| 2017 | In-Situ Transmission Electron Microscopy Studies on Advanced Materials for Micro- and Nano-Electronics
Liao, Zhongquan
: Zschech, Ehrenfried (Gutachter); Cuniberti, Gianaurelio (Gutachter); Wolf, Ingrid de (Gutachter) | Dissertation |
| 2017 | Industrielle Reststoffe dreifach nutzen
Wufka, A.; Weile, F.; Münch, C.; Müller, P.; Georgi, H. | Journal Article |
| 2017 | Influence of C content on electrochemical corrosion resistance of nanostructured hardmetals
Fabijanic, T.A.; Pötschke, J.; Alar, V.; Alar, Ž. | Conference Paper |
| 2017 | Influence of carbon source and synthesis temperature on structural and morphological properties of carbon nanofibers synthesized on tubular porous ZrO2 layers
Simon, Adrian; Seyring, Martin; Reger-Wagner, Norman; Richter, Hannes; Voigt, Ingolf; Rettenmayr, Markus; Ritter, Uwe | Journal Article |
| 2017 | Influence of feedstock powder modification by heat treatments on the properties of APS-sprayed Al2O3-40%TiO2 coatings
Berger, Lutz-Michael; Vaßen, Robert; Sohn, Yoo Jung | Conference Paper |
| 2017 | Influence of post-treatment on the microstructural and tribomechanical properties of suspension thermally sprayed WC-12 wt%Co nanocomposite coatings
Ali, O.; Ahmed, R.; Faisal, N.H.; Alazani, N.M.; Berger, Lutz-Michael; Kaiser, Arno; Toma, Filofteia-Laura; Polychroniadis, E.K.; Sall, M.; Elakwah, Y.O.; Goosen, M.F.A. | Journal Article |
| 2017 | Influence of temperature and steam content on degradation of metallic interconnects in reducing atmosphere
Folgner, Christoph; Sauchuk, Viktar; Kusnezoff, Mihails; Michaelis, Alexander | Conference Paper |
| 2017 | Influence of the anode graphite particle size on the SEI film formation in lithium-ion cells
Reinke, Christian; Nikolowski, Kristian; Wolter, Mareike; Michaelis, Alexander | Book Article |
| 2017 | Insights into the buffer effect observed in blended lithium insertion electrodes
Heubner, Christian; Liebmann, Tobias; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2017 | Integration of piezoceramic composites in aluminium die casting structures and their functional characterization
Rhein, Sebastian; Wedler, Jonathan; Stein, Stefan; Körner, Carolin; Schmidt, Michael; Michaelis, Alexander; Gebhardt, Sylvia | Conference Paper |
| 2017 | Integrierte Strukturüberwachung sicherheitsrelevanter Fahrzeugkomponenten aus kohlefaserverstärkten Kunststoffverbundwerkstoffen
Tschöke, Kilian; Gaul, Tobias; Dungern, Friedrich von; Schubert, Lars | Conference Paper |
| 2017 | Integrierte Versuchsmethode zur Analyse des Matrizenfüllprozesses beim uniaxialen Trockenpressen
Glöß, Bianca; Fries, Manfred; Michaelis, Alexander | Journal Article |
| 2017 | Intelligent signal processing on a miniaturized hardware module
Tschöpe, Constanze; Duckhorn, Frank; Richter, Christian; Blüthgen, Peter; Wolff, Matthias | Conference Paper |
| 2017 | Intense red-green up-conversion emission and their mechanisms of SrO: Er3+/Yb3+, Gd3+, Lu3+, Bi3+
Fu, Jipeng; Pang, Ran; Jia, Yonglei; Sun, Wenzhi; Jiang, Lihong; Zhang, Su; Li, Chengyu | Journal Article |
| 2017 | Interaction with spectral consequences between TM+ type cations located in oxide glass hosts
Goldstein, Adrian; Vulfson, Marina; Shames, Alex; Katz, Michael; Räthel, Jan | Journal Article |
| 2017 | Interconnect Corrosion in Steam Containing Fuel Gas
Folgner, Christoph; Sauchuk, Viktar; Megel, Stefan; Kusnezoff, Mihails; Michaelis, Alexander | Conference Paper |
| 2017 | Interplay between wet-dry-cycles and corrosion initiation due to chloride accumulation on AA1050 - A simple experimental approach
Schneider, M.; Ferl, S.; Langklotz, U. | Conference Paper |
| 2017 | Investigations of burning phenomena during the hard anodising of aluminium by local in-operando temperature measurements
Lämmel, Christoph; Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2017 | Ionically conductive polymer/ceramic separator for lithium-sulfur batteries
Freitag, Anne; Langklotz, Ulrike; Rost, Axel; Stamm, Manfred; Ionov, Leonid | Journal Article |
| 2017 | Iridium nanoparticles anchored on 3D graphite foam as a bifunctional electrocatalyst for excellent overall water splitting in acidic solution
Zhang, Jian; Wang, Gang; Liao, Zhongquan; Zhang, Panpan; Wang, Faxing; Zhuang, Xiaodong; Zschech, Ehrenfried; Feng, Xinliang | Journal Article |
| 2017 | Kombination aktiver Werkstoffe und additiver Fertigung für alternative Implantatkonzepte
Rotsch, Christian; Töppel, Thomas; Gille, Katarina; Hunger, Sandra; Werner, Michael; Müller, Bernhard; Lausch, Holger | Presentation |
| 2017 | A laser speckle photometry based non-destructive method for measuring stress conditions in direct-copper-bonded ceramics for power electronic application
Münch, Stefan; Röllig, Mike; Cikalova, Ulana; Bendjus, Beatrice; Chen, Lili; Lautenschläger, Georg; Sudip, Shohag Roy | Conference Paper |
| 2017 | Laser-based functionalization of electronic multi-material-layers for embedded sensors
Vedder, Christian; Wollgarten, Susanne; Gradmann, Rena; Stollenwerk, Jochen Hugo; Wissenbach, Konrad; Eberstein, Markus | Journal Article |
| 2017 | Lifetime vs. rate capability: Understanding the role of FEC and VC in high-energy Li-ion batteries with nano-silicon anodes
Jaumann, Tony; Balach, Juan; Langklotz, Ulrike; Sauchuk, Viktar; Fritsch, Marco; Teltevskij, Valerij; Oswald, Steffen; Klose, Markus; Stephani, Günter; Hauser, Ralf; Michaelis, Alexander; Eckert, Jürgen; Giebeler, Lars | Journal Article |
| 2017 | Lithium loss indicated formation of microcracks in LATP ceramics
Wätzig, Katja; Rost, Axel; Langklotz, Ulrike; Schilm, Jochen | Conference Paper |
| 2017 | Lithography-based ceramic manufacturing (LCM) - Viscosity and cleaning as two quality influencing steps in the process chain of printing green parts
Schwarzer, Eric; Götz, Michael; Markova, D.; Stafford, D.; Scheithauer, Uwe; Moritz, Tassilo | Journal Article |
| 2017 | Low ppm failure analysis for advanced Cu and Cu alloy on-chip wiring
Kraatz, Matthias; Hauschildt, Meike; Gall, Martin; Zschech, Ehrenfried | Conference Paper |
| 2017 | Low temperature stability of 4O martensite in Ni49.1Mn38.9Sn12 metamagnetic Heusler alloy ribbons
Czaja, Paweł; Przewoźnik, Janusz; Gondek, Łukasz; Hawełek, Łukasz; Żywczak, Antoni; Zschech, Ehrenfried | Journal Article |
| 2017 | Macro-mixing characterisation of a stirred model fermenter of non-Newtonian liquid by flow following sensor particles and ERT
Reinecke, Sebastian; Deutschmann, Anne; Jobst, Karin; Hampel, Uwe | Journal Article |
| 2017 | Manufacturing and properties of tungsten carbide-oxide composites
Vornberger, Anne; Pötschke, Johannes; Berger, Christian | Conference Paper |
| 2017 | Material- and process hybridization for multifunctional ceramic and glass components
Moritz, Tassilo; Scheithauer, Uwe; Mannschatz, Anne; Ahlhelm, Matthias; Abel, Johannes; Schwarzer, Eric; Pohl, Markus; Müller-Köhn, Axel | Journal Article |
| 2017 | Mehrlagenkeramik und Keramikspritzguss
Ziesche, Steffen; Lenz, Christian; Müller-Köhn, Axel | Journal Article |
| 2017 | Metal uptake and distribution in the zebrafish (Danio rerio) embryo: Differences between nanoparticles and metal ions
Böhme, Steffi; Baccaro, Marta; Schmidt, Matthias; Potthoff, Annegret; Stärk, Hans-Joachim; Reemtsma, Thorsten; Kühnel, Dana | Journal Article |
| 2017 | Metall-keramische Verbundwerkstoffe: Papiertechnologische Verfahren zur Herstellung metall-keramischer Verbundwerkstoffe
Zelm, Roland; Greiffenberg, Ina; Wagenführ, André; Moritz, Tassilo; Günther, Anne; Michaelis, Alexander; Slawik, Tim | Journal Article |
| 2017 | Method for the development of realistic boundary conditions for the simulation of non-contact tonometry
Münch, Stefan; Balzani, Daniel; Röllig, Mike; Spörl, Eberhard | Journal Article, Conference Paper |
| 2017 | Micro-patterning by thermoplastic forming of Ni-free Ti-based bulk metallic glasses
Bera, Supriya; Sarac, Baran; Balakin, Sascha; Ramasamy, Parthiban; Stoica, Mihai; Cǎlin, Mariana; Eckert, Jürgen | Journal Article |
| 2017 | Microelectrochemical investigation of anodic oxide formation on the aluminum alloy AA2024
Schneider, Michael; Liebmann, Tobias; Langklotz, Ulrike; Michaelis, Alexander | Journal Article |
| 2017 | Micropatterning kinetics of different glass-forming systems investigated by thermoplastic net-shaping
Sarac, Baran; Bera, Supriya; Spieckermann, Florian; Balakin, Sascha; Stoica, Mihai; Cǎlin, Mariana; Eckert, Jürgen | Journal Article |
| 2017 | Microstructural characteristics and performances of Cr2O3 and Cr2O3-15%TiO2 S-HVOF coatings obtained from water-based suspensions
Toma, Filofteia-Laura; Kulissa, Nick; Langner, Stefan; Potthoff, Annegret; Barbosa, Maria M.; Leyens, Christoph | Conference Paper |
| 2017 | Microstructural evolution during sintering of cermets studied using interrupted sintering experiments and novel 2D and 3D FESEM based techniques
Pötschke, Johannes; Höhn, Sören; Richter, Volkmar; Mayer, Markus | Journal Article |
| 2017 | Microstructural investigation of diamond-SiC composites produced by pressureless silicon infiltration
Matthey, Björn; Höhn, Sören; Wolfrum, Anne-Kathrin; Mühle, Uwe; Motylenko, Mykhaylo; Rafaja, David; Michaelis, Alexander; Herrmann, Mathias | Journal Article |
| 2017 | Miniaturised flame ionisation detector for explosion protection in civil sewerage networks
Förster, Jan; Kuipers, Winfred; Koch, Christian; Lenz, Christian; Ziesche, Steffen; Jurkow, Dominik | Conference Paper |
| 2017 | Monitoring of welded seams on the foundations of offshore wind turbines
Weihnacht, Bianca; Frankenstein, Bernd; Gaul, Tobias; Neubeck, Robert; Schubert, Lars | Journal Article |
| 2017 | A multi technique study of a new lithium disilicate glass-ceramic spray-coated on ZrO2 substrate for dental restoration
Möncke, Doris; Ehrt, Roland; Palles, Dimitrios; Efthimiopoulos, Ilias; Kamitsos, Efstratios I.; Johannes, Martina | Journal Article |
| 2017 | Multi-material approach to integrate ceramic boxed sensors and actuators in laser beam melted structures for tailored smart bio applications
Lausch, Holger; Töppel, Thomas; Brand, Michael; Hensel, Eric; Arnold, Michael; Rotsch, Christian; Gronde, Bernd | Presentation |
| 2017 | Novel ceramic composites for personalized 3D-structures
Ahlhelm, Matthias; Schwarzer, Eric; Scheithauer, Uwe; Moritz, Tassilo; Michaelis, Alexander | Journal Article |
| 2017 | Novel thermocouples for temperature measurement in automotive applications
Gierth, Paul; Rebenklau, Lars; Augsburg, Klaus; Niedermeyer, Lars; Bachmann, Eric | Conference Paper |
| 2017 | Optimization of ESC performance for co-electrolysis operation
Trofimenko, Nikolai; Kusnezoff, Mihails; Michaelis, Alexander | Conference Paper |
| 2017 | Optimization of the temperature program to scale up the stabilization of polyacrylonitrile fibers
Meinl, Juliane; Schönfeld, Katrin; Kirsten, Martin; Kittler, Karsten; Michaelis, Alexander; Cherif, Chokri | Journal Article |
| 2017 | Pan-European inter-laboratory studies on a panel of in vitro cytotoxicity and pro-inflammation assays for nanoparticles
Piret, Jean-Pascal; Bondarenko, Olesja M.; Boyles, Matthew S.P.; Himly, Martin; Ribeiro, Ana R.; Benetti, Federico; Smal, Caroline; Lima, Braulio; Potthoff, Annegret; Simion, Monica; Dumortier, Elise; Leite, Paulo Emilio C.; Balottin, Luciene Bottentuit; Granjeiro, José Mauro; Ivask, Angela; Kahru, Anne; Radauer-Preiml, Isabella; Tischler, Ulrike; Duschl, Albert; Saout, Christelle; Anguissola, Sergio; Haase, Andrea; Jacobs, An; Nelissen, Inge; Misra, Superb K.; Toussaint, Olivier | Journal Article |
| 2017 | Particle reinforced open porous anodizing layers on AA5005
Schneider, Michael; Kremmer, Kerstin; Weidmann, Stefanie; Fürbeth, Wolfram | Journal Article |
| 2017 | Phase transformation in AFM silicon tips
Kopycinska-Müller, Malgorzata; Barth, Martin; Küttner, Martin; Köhler, Bernd | Journal Article |
| 2017 | Physikalische Werkstoffdiagnostik
Bauch, Jürgen; Rosenkranz, Rüdiger | Book |
| 2017 | Point focusing with flat and wedged crossed multilayer Laue lenses
Kubec, Adam; Melzer, Kathleen; Gluch, Jürgen; Niese, Sven; Braun, Stefan; Patommel, Jens; Burghammer, Manfred; Leson, Andreas | Journal Article |
| 2017 | Precursor-basierte Darstellung von Magnéli-Phasen TinO2n-1 für die Anwendung als Thermeoelektrikum
Conze, Susan
: Grin, Juri (Gutachter); Michaelis, Alexander (Gutachter); Kinski, Isabel (Betreuer) | Dissertation |
| 2017 | Preface - Journal of Ceramic Science and Technology 1/2017. Special Issue, 6th International Congress on Ceramics (ICC6)
Michaelis, A. | Journal Article, Conference Paper |
| 2017 | Preparation and TEM characterization of interfaces in co-sintered metal-ceramic composites
Mühle, Uwe; Günther, Anne; Standke, Yvonne; Moritz, Tassilo; Gluch, Jürgen; Zschech, Ehrenfried | Poster |
| 2017 | Pressureless sintering of ZrC with variable stoichiometry
Schönfeld, Katrin; Martin, Hans-Peter; Michaelis, Alexander | Journal Article |
| 2017 | A process chain for integrating piezoelectric transducers into aluminum die castings to generate smart lightweight structures
Stein, Stefan; Wedler, Jonathan; Rhein, Sebastian; Schmidt, Michael; Körner, Carolin; Michaelis, Alexander; Gebhardt, Sylvia | Journal Article |
| 2017 | Quantitative crystallographic analysis of individual carbon nanofibers using high resolution transmission electron microscopy and electron diffraction
Seyring, Martin; Simon, Adrian; Voigt, Ingolf; Ritter, Uwe; Rettenmayr, Markus | Journal Article |
| 2017 | Rate controlled sintering of binderless tungsten carbide
Hennicke, J.; Kessel, T.; Poetschke, J.; Vornberger, A. | Conference Paper |
| 2017 | Reconfigurable germanium transistors with low source-drain leakage for secure and energy-efficient doping-free complementary circuits
Trommer, Jens; Heinzig, André; Slesazeck, Stefan; Mühle, Uwe; Löffler, Markus; Walter, Dennis; Mayr, Christian Georg; Mikolajick, Thomas; Weber, Walter Michael | Conference Paper |
| 2017 | Reducing uncertainty and confronting ignorance about the possible impacts of weathering plastic in the marine environment
Jahnke, Annika; Potthoff, Annegret; Arp, Hans Peter H.; Escher, Beate I.; Gewert, Berit; Gorokhova, Elena; Kühnel, Dana; Ogonowski, Martin; Rummel, Christoph Daniel; Schmitt-Jansen, Mechthild; Toorman, Erik; MacLeod, Matthew | Journal Article |
| 2017 | Reversible heat generation rates of blended insertion electrodes
Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2017 | Review Article: Recommended reading list of early publications on atomic layer deposition - outcome of the "Virtual Project on the History of ALD"
Ahvenniemi, Esko; Akbashev, Andrew R.; Ali, Saima; Bechelany, Mikhael C.; Berdova, Maria; Boyadjiev, Stefan; Cameron, David; Chen, Rong; Chubarov, Mikhail; Cremers, Véronique; Devi, Anjana; Drozd, V.E.; El’nikova, Liliya; Gottardi, Gloria; Grigoras, Kestutis; Hausmann, Dennis; Hwang, Cheolseong; Jen, Shihhui; Kallio, Tanja; Kanervo, Jaana; Khmelnitskiy, Ivan; Kim, Dohan; Klibanov, Lev; Koshtyal, Yury; Krause, A. Outi; Kuhs, Jakob; Kärkkänen, Irina; Kääriäinen, Marja Leena; Kääriäinen, Tommi; Lamagna, Luca; Łapicki, Adam; Leskelä, Markku; Lipsanen, Harri; Aav, Jussi; Malkov, Anatoly; Malygin, Anatoly; Mennad, Abdelkader; Militzer, Christian; Molarius, Jyrki; Norek, Małgorzata; Ozgit-Akgun, Cagla; Panov, Mikhail; Pedersen, Henrik; Piallat, Fabien; Popov, Georgi; Puurunen, Riikka; Rampelberg, Geert; Ras, Robin; Rauwel, Erwan; Roozeboom, Fred; Sajavaara, Timo; Salami, Hossein; Savin, Hele; Schneider, Nathanaëlle; Seidel, Thomas E.; Sundqvist, Jonas; Suyatin, Dmitry B.; Törndahl, Tobias; Ommen, | Journal Article |
| 2017 | Riss- und Schadenssanierung von Betonwerkstein mittels Expansionstechnologie
Hoyer, Thomas | Book Article |
| 2017 | Sauerstoff-liefernde Keramiken für Verbrennungsprozesse
Kriegel, Ralf | Journal Article |
| 2017 | Scale-up of mixing processes of highly concentrated suspensions using electrical resistance tomography
Lomtscher, Annett; Jobst, Karin; Fogel, Stefan; Rostalski, Kay; Stempin, Silke; Kraume, Matthias | Journal Article |
| 2017 | Schichten aus Kohlenstoff-Nanomaterialien auf asymmetrisch porösen, keramischen Trägern und deren Erprobung für Anwendungen in Membrantechnik und Katalyse
Simon, Adrian
: Ritter, Uwe; Rädlein, Edda (Gutachter); Voigt, Ingolf (Gutachter); Michaelis, Alexander (Hrsg.) | Dissertation |
| 2017 | Self-healing EBC material for gas turbine applications
Kunz, Willy; Klemm, Hagen | Conference Paper |
| 2017 | Sensorfunktion im Faserverbund
Lätzsch, Hans-Joachim; Modler, Niels; Geller, Sirko; Weißenborn, Oliver; Röllig, Mike; Schwerz, Robert; Müller, Uwe; Sauer, Sebastian | Journal Article |
| 2017 | SiC-bonded diamond materials produced by pressureless silicon infiltration
Matthey, Björn; Herrmann, Mathias; Hörner, Martin; Geldern, Maike van; Kunze, Steffen; Blug, Bernhard; Michaelis, Alexander | Journal Article |
| 2017 | Sinter kinetics and interface reactions of silver thick films on aluminium nitride
Marcinkowski, Manja; Schwab, Olga; Schmidt, Richard; Eberstein, Markus; Partsch, Uwe | Conference Paper |
| 2017 | A smart eddy current sensor dedicated to the nondestructive evaluation of carbon fibers reinforced polymers
Naidjate, Mohammed; Helifa, Bachir; Feliachi, Mouloud; Lefkaier, Iben-Khaldoun; Heuer, Henning; Schulze, Martin | Journal Article |
| 2017 | Solid state sintered nanoscaled hardmetals and their properties
Pötschke, Johannes; Säuberlich, Tino | Conference Paper |
| 2017 | State transition and electrocaloric effect of BaZrxTi1-xO3: Simulation and experiment
Ma, Yangbin; Molin, Christian; Shvartsman, Vladimir; Gebhardt, Sylvia; Lupascu, Doru Constantin; Albe, Karsten; Xu, Baixiang | Journal Article |
| 2017 | Structural integration of sensors / actuators by laser beam melting for tailored smart components
Töppel, Thomas; Lausch, Holger; Brand, Michael; Hensel, Eric; Arnold, Michael; Rotsch, Christian | Presentation |
| 2017 | Structural relaxation phenomena in silicate glasses modified by irradiation with femtosecond laser pulses
Seuthe, Thomas; Mermillod-Blondin, Alexandre; Grehn, Moritz; Bonse, Jörn; Wondraczek, Lothar; Eberstein, Markus | Journal Article |
| 2017 | Study of a particle based films cure process by high-frequency eddy current spectroscopy
Patsora, Iryna; Heuer, Henning; Hillmann, Susanne; Tatarchuk, Dmitrii | Journal Article |
| 2017 | Study of WC- and Cr3C2-containing hardmetal compositions for thermal spray coatings
Berger, Lutz-Michael; Sassatelli, Paolo; Pötschke, Johannes; Puddu, Pietro | Conference Paper |
| 2017 | Synthese und Charakterisierung von Galliumoxidnitriden
Oberländer, Andreas
: Michaelis, Alexander (Gutachter); Huppertz, Hubert (Gutachter); Kinski, Isabel (Betreuer) | Dissertation |
| 2017 | Synthesis, formulation, rapid curing of particle-based inkjet/aerosol-jet printed films for electronic and sensory devices
Fritsch, Marco; Vinnichenko, Mykola; Sauchuk, Viktar; Trofimenko, Nikolai | Poster |
| 2017 | System zur drahtlosen Übertragung von Energie und/oder Signalen, der Wandlung der Energie und/oder Signale in andere Energieformen und/oder Signalformen sowie deren Applizierung und Detektion in peripheren Bereichen des Systems
Lausch, Holger; Brand, Michael; Arnold, Michael | Patent |
| 2017 | Ta-Ni- and Ti-Al-braze-alloys for high temperature stable ceramic - ceramic junctions
Roszeitis, Sven | Presentation |
| 2017 | Target preparation and characterization of interfaces in co-sintered metal ceramic composites using imaging and analytical Transmission Electron Microscopy
Mühle, Uwe; Günther, Anne; Standke, Yvonne; Moritz, Tassilo; Herrmann, Mathias; Gluch, Jürgen; Zschech, Ehrenfried | Book Article |
| 2017 | Temperature induced compositional redistribution in blended insertion electrodes
Heubner, Christian; Lämmel, Christoph; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2017 | Theranostische Implantate - Wie können sie die endoprothetische Versorgung in Zukunft unterstützen?
Rotsch, Christian; Lausch, Holger | Presentation |
| 2017 | Thermal behaviour of cermets and hardmetals during debinding and sintering
Gestrich, Tim; Kaiser, Arno; Pötschke, Johannes; Meinl, Juliane; Höhn, Sören | Conference Paper |
| 2017 | Thermally induced metallurgical processes in Cr3C2-NiCr thermal spray coatings as a function of carbide dissolution
Matthews, Steven; Asadov, A.; Ruddell, S.; Berger, Lutz-Michael | Journal Article |
| 2017 | Thermoelektrische Messvorrichtung und ihre Verwendung
Wodtke, Axel; Niedermeyer, Lars; Augsburg, Klaus; Bechtold, Franz; Rebenklau, Lars; Irrgang, Klaus; Lippmann, Lutz | Patent |
| 2017 | Thermoelektrisches Element sowie ein Verfahren zu dessen Herstellung
Rebenklau, Lars; Gierth, Paul; Wodtke, Axel; Niedermeyer, Lars; Augsburg, Klaus | Patent |
| 2017 | Towards an autarkic embedded cognitive user interface
Duckhorn, Frank; Huber, Markus; Meyer, Werner; Jokisch, Oliver; Tschöpe, Constanze; Wolff, Matthias | Conference Paper |
| 2017 | Towards next-generation sequencing-based identification of norovirus recognition elements and microfluidic array using phage display technology
Pahlke, Claudia
: Vollmer, Günter (1. Prüfer); Cuniberti, Gianaurelio (2. Prüfer); Opitz, Jörg (Betreuer); Baraban, Larysa (Betreuer); Szardenings, Michael (Betreuer) | Dissertation |
| 2017 | Ultraschallbasierte Analyse des Lagenaufbaus von CFK
Meyer, Jean
: Heuer, Henning (Betreuer) | Dissertation |
| 2017 | Untersuchung der Hydrodynamik von ovalen Biogasreaktoren mit instrumentierten Strömungsfolgern
Reinecke, Sebastian Felix; Jobst, Karin; Hampel, Uwe | Journal Article |
| 2017 | Untersuchung der Hydrodynamik von ovalen Biogasreaktoren mit instrumentierten Strömungsfolgern. Corrigendum
Reinecke, Sebastian; Jobst, Karin; Hampel, Uwe | Journal Article |
| 2017 | Untersuchung des Anwendungspotenzials der Hochfrequenzwirbelstrommesstechnik zur Charakterisierung dielektrischer Eigenschaften von Epoxidharzen und Faserverbundmaterialien
Gäbler, Simone
: Heinrich, Gert (Betreuer); Heuer, Henning (Betreuer) | Dissertation |
| 2017 | Untersuchungen an zugfesten Pressverbindungen für Fahrleitungsanlagen
Schlegel, Stephan; Pfeifer, Stephanie; Großmann, Steffen; Herzog, Thomas; Walter, Susan; Heuer, Henning; Kurzweil, Franz | Journal Article |
| 2017 | Validation of different SAC305 material models calibrated on isothermal tests using in-situ TMF measurement of thermally induced shear load
Kuczynska, Marta; Schafet, Natalja; Becker, Ulrich; Metasch, René; Röllig, Mike; Kabakchiev, Alexander; Weihe, Stefan | Conference Paper |
| 2017 | Verbundkörper mit mindestens einer Funktionskomponente und ein Verfahren zur Herstellung eines Verbundkörpers
Lausch, Holger; Herrmann, Mathias; Gronde, Bernd; Töppel, Thomas; Petters, Romy | Patent |
| 2017 | Verdeckte Fehleranzeigen erkennen
Heilmann, Stephan; Maaß, Michael | Journal Article |
| 2017 | Verfahren und Vorrichtung zum Betrieb einer Gasturbine mit nasser Verbrennung
Kriegel, Ralf | Patent |
| 2017 | Verfahren zur Bestimmung einer Strahlendosis und Produkt
Schuster, Christiane; Härtling, Thomas | Patent |
| 2017 | Verfahren zur Produktkontrolle und Produktkörper
Härtling, Thomas | Patent |
| 2017 | Verfahren zur Trockenbeschichtung von Trägern
Hoffmann, Robert; Jäger, Benjamin; Pippardt, Ute; Vogel, Andy | Patent |
| 2017 | Verification and characterization of an alternative low density lipoprotein receptor-related protein 1 splice variant
Kolb, Marlen; Kurz, Susanne; Schäfer, Angelika; Huse, Klaus; Dietz, Andreas; Wichmann, Gunnar; Birkenmeier, Gerd | Journal Article |
| 2017 | Visualization of the internal structure of Didymosphenia geminata frustules using nano X-ray tomography
Zglobicka, Izabela; Li, Qiong; Gluch, Jürgen; Płocińska, Magdalena; Noga, Teresa; Dobosz, Romuald; Szoszkiewicz, Robert; Witkowski, Andrzej; Zschech, Ehrenfried; Kurzydłowski, Krzysztof J. | Journal Article |
| 2017 | Volume imaging NDE and serial sectioning of carbon fiber composites
Hakim, Issa; Schumacher, David; Sundar, Veeraraghavan; Donaldson, Steven L.; Creuz, Aline; Schneider, Rainer; Keller, Juergen; Browning, Charles E.; May, Daniel; Ras, Mohamad Abo; Meyendorf, Norbert G.H. | Conference Paper |
| 2017 | Vorrichtung und Verfahren zur Behandlung von Abgasen in Einzelraumfeuerungsanlagen
Adler, Jörg; Petasch, Uwe; Haase, Daniela; Hark, Werner; Hark, Udo | Patent |
| 2017 | Vorrichtung und Verfahren zur Bestimmung eines medizinischen Gesundheitsparameters eines Probanden mittels Stimmanalyse
Saeltzer, Gerhard; Tschöpe, Constanze; Wolff, Matthias | Patent |
| 2017 | Waste heat energy harvesting by use of BaTiO3 for pyroelectric hydrogen generation
Belitz, R.; Meisner, P.; Coeler, Matthias; Wunderwald, U.; Friedrich, Jochen; Zosel, J.; Schelter, Matthias; Jachalke, Sven; Mehner, Erik | Journal Article |
| 2017 | WEATHER-MIC - How microplastic weathering changes its transport, fate, and toxicity in the marine environment
Jahnke, Annika; MacLeod, Matthew; Potthoff, Annegret; Toorman, Erik; Arp, Hans Peter H. | Conference Paper |
| 2017 | Wettability of tungsten carbide by liquid binders in WC-Co cemented carbides: Is it complete for all carbon contents?
Konyashin, Igor; Zaitsev, Alexander A.; Sidorenko, Daria A.; Levashov, Evgeny A.; Ries, Bernd; Konischev, S.N.; Sorokin, M.; Mazilkin, Andrei A.; Herrmann, Mathias; Kaiser, Arno | Journal Article |
| 2017 | Why not using ceramics - trends from ceramics research
Stepanyan, Marina; Seifert, Gerhard; Weiß, Torsten; Klein, Tiago Borsoi; Freund, Susanne | Journal Article |
| 2017 | Zeolite membranes: Functionalizing of properties by tailored compositions
Richter, Hannes; Weyd, Marcus; Simon, Adrian; Kühnert, Jan-Thomas; Günther, Christiane; Voigt, Ingolf; Michaelis, Alexander | Journal Article |
| 2017 | Zirkonoxid-Keramik, zellularer Werkstoff daraus und Verfahren zur Herstellung der Zirkonoxid-Keramik
Adler, Jörg; Haase, Daniela; Standke, Gisela | Patent |
| 2016 | 2-D crossed-electrode transducer arrays for ultrasonic particle manipulation
Wang, Han; Qiu, Yongqiang; Démoré, Christine; Gebhardt, Sylvia; Cochran, Sandy | Conference Paper |
| 2016 | Active electrocaloric demonstrator for direct comparison of PMN-PT bulk and multilayer samples
Blumenthal, Philipp; Molin, Christian; Gebhardt, Sylvia; Raatz, Annika | Journal Article, Conference Paper |
| 2016 | Adaption of functional ceramic materials for the laser sintering process in integrated sensor applications
Gradmann, Rena; Seuthe, Thomas; Vedder, Christian; Eberstein, Markus; Partsch, Uwe | Journal Article, Conference Paper |
| 2016 | Adaption of functional ceramic materials for the laser sintering process in integrated sensor applications
Gradmann, Rena; Seuthe, Thomas; Vedder, Christian; Eberstein, Markus; Partsch, Uwe | Journal Article |
| 2016 | Additive Herstellung keramischer und metall-keramischer Bauteile
Scheithauer, Uwe; Schwarzer, Eric; Gradmann, Rena; Pohl, Markus; Moritz, Tassilo; Eberstein, Markus; Michaelis, Alexander | Poster |
| 2016 | Additive Herstellung mehrkomponentiger metallischer und keramischer Bauteile mittels thermoplastischen 3D-Druckes (T3DP)
Härtel, Anja; Scheithauer, Uwe; Schwarzer, Eric; Weingarten, Steven; Slawik, Tim; Richter, Hans-Jürgen; Moritz, Tassilo | Journal Article |
| 2016 | Additive Manufacturing and Strategic Technologies in Advanced Ceramics
: Shimamura, Kiyoshi (Ed.); Kirihara, Soshu (Ed.); Akedo, Jun (Ed.); Ohji, Tatsuki (Ed.); Naito, Makio (Ed.); Singh, Mrityunjay (Vol. Ed.); Ohji, Tatsuki (Vol. Ed.); Michaelis, Alexander (Vol. Ed.) | Conference Proceedings |
| 2016 | Additive manufacturing of ceramic components using powder bed and suspension methods
Richter, Hans-Jürgen; Moritz, Tassilo; Scheithauer, Uwe; Ahlhelm, Matthias; Schwarzer, Eric | Journal Article |
| 2016 | Advanced and Refractory Ceramics for Energy Conservation and Efficiency
: Lin, Hua-Tay (Ed.); Hemrick, James (Ed.); Singh, Mrityunjay (Vol. Ed.); Ohji, Tatsuki (Vol. Ed.); Michaelis, Alexander (Vol. Ed.) | Conference Proceedings |
| 2016 | Advances in solid oxide fuel cells and electronic ceramics
: Bansal, Narottam P. (Ed.); Kusnezoff, Mihails (Ed.); Shimamura, Kiyoshi (Ed.) | Conference Proceedings |
| 2016 | Aktivlöten von Keramik: Erhitzungsmikroskopie und komplexe thermische Analyse in hochreinen Atmosphären
Gestrich, Tim; Kaiser, Arno; Meinl, Juliane; Schilm, Jochen; Linseis, Florian; Seibt, Sebastian; Gollner, Michael | Journal Article |
| 2016 | Al in ZnO - from doping to alloying. An investigation of Al electrical activation in relation to structure and charge transport limits
Cornelius, Steffen; Vinnichenko, Mykola | Journal Article |
| 2016 | Amorphous, turbostratic and crystalline carbon membranes with hydrogen selectivity
Wollbrink, Alexander; Volgmann, Kai; Koch, Jason A.; Kanthasamy, Karthiga; Tegenkamp, Christoph; Li, Yun; Richter, Hannes R.; Kämnitz, Susanne; Steinbach, Frank; Feldhoff, Armin; Caro, Jürgen | Journal Article |
| 2016 | Autartec®-Systeme zur dezentralen Wasseraufbereitung
Faßauer, Burkhardt | Journal Article |
| 2016 | Automated detection of yarn orientation in 3D-draped carbon fiber fabrics and preforms from eddy current data
Bardl, Georg; Nocke, Andreas; Cherif, Chokri; Pooch, Matthias; Schulze, Martin H.; Heuer, Henning; Schiller, Marko; Kupke, Richard; Klein, Marcus | Journal Article |
| 2016 | Automatische 3D-Drapieranalyse und Fadenrichtungsbestimmung für technische Textilien
Bardl, Georg; Weise, Daniel; Nocke, Andreas; Cherif, Chokri; Pooch, Matthias; Schulze, Martin; Heuer, Henning; Schiller, Marko | Journal Article |
| 2016 | Basisprojekt: Smart Tools for Smart Design
Weisheit, Linda; Wolf, Julia; Biedermann, Miriam; Schönecker, Andreas | Report |
| 2016 | Binary WC- and Cr3C2-containing hardmetal compositions for thermally sprayed coatings
Berger, Lutz-Michael | Conference Paper |
| 2016 | Bonding structure and morphology of chromium oxide films grown by pulsed-DC reactive magnetron sputter deposition
Gago, R.; Vinnichenko, Mykola; Hübner, René; Redondo-Cubero, Andrés | Journal Article |
| 2016 | Brazing of kovar to alumina and LTCC for integration of ceramic pressure sensors
Schilm, Jochen; Pönicke, Andreas; Goldberg, Adrian; Partsch, Uwe; Michaelis, Alexander | Conference Paper |
| 2016 | Carbon membrane gas separation of binary CO2 mixtures at high pressure
Kruse, N.; Schießer, Y.; Kämnitz, Susanne; Richter, Hannes R.; Voigt, Ingolf; Braun, G.; Repke, Jens Uwe | Journal Article |
| 2016 | Ceramic and metal-ceramic components with graded microstructure
Scheithauer, Uwe; Schwarzer, Eric; Otto, Christian; Slawik, Tim; Moritz, Tassilo; Michaelis, Alexander | Conference Paper |
| 2016 | Ceramic substrate technology for wafer level packaging of MEMS
Ziesche, Steffen; Ihle, Martin; Gabler, Felix; Roscher, Frank | Conference Paper |
| 2016 | Ceramics for Energy Conversion, Storage, and Distribution Systems
: Pfeifer, Thomas (Ed.); Matyás, Josef (Ed.); Balaya, Palani (Ed.); Singh, Dileep (Ed.); Wei, John (Ed.); Singh, Mrityunjay (Vol. Ed.); Ohji, Tatsuki (Vol. Ed.); Michaelis, Alexander (Vol. Ed.) | Conference Proceedings |
| 2016 | Ceramics for Environmental Systems
: Wang, Liazhou (Ed.); Imanak, Nobuhito (Ed.); Kriven, Waltraud M. (Ed.); Fukushima, Manabu (Ed.); Kale, Girish (Ed.); Singh, Mrityunjay (Vol. Ed.); Ohji, Tatsuki (Vol. Ed.); Michaelis, Alexander (Vol. Ed.) | Conference Proceedings |
| 2016 | CFY-Stacks: Progress in Development
Megel, Stefan; Kusnezoff, Mihails; Beckert, Wieland; Trofimenko, Nikolai; Dosch, Christian; Weder, Aniko; Jahn, Matthias; Michaelis, Alexander; Bienert, Christian; Brandner, Marco; Skrabs, Stefan; Schulmeyer, Werner; Sigl, Lorenz S. | Poster |
| 2016 | CFY-Stacks: Progress in Development
Megel, Stefan; Kusnezoff, Mihails; Beckert, Wieland; Trofimenko, Nikolai; Dosch, Christian; Weder, Aniko; Jahn, Matthias; Michaelis, Alexander; Bienert, Christian; Brandner, Marco; Skrabs, Stefan; Schulmeyer, Werner; Sigl, Lorenz S. | Conference Paper |
| 2016 | Characteristics of wet-spun and thermally treated poly acrylonitrile fibers
Kirsten, Martin; Meinl, Juliane; Schönfeld, Katrin; Michaelis, Alexander; Cherif, Chokri | Journal Article |
| 2016 | Characterization of anodic bondable LTCC for wafer-level packaging
Hu, Xiaodong; Bäuscher, Manuel; MacKowiak, Piotr; Zhang, Yucheng; Hoelck, Ole; Walter, Hans; Ihle, Martin; Ziesche, Steffen; Hansen, Ulli; Maus, Simon; Gyenge, Oliver; Mukhopadhyay, Biswajit; Ehrmann, Oswin; Lang, Klausdieter; Ngo, Haduong | Conference Paper |
| 2016 | Characterization of polymer-based materials using fluorescence method and fractal analysis
Chapnyi, Taras; Beshchasna, Nataliia; Schreiber, Jürgen; Opitz, Jörg | Conference Paper |
| 2016 | Co-sintering behaviour of zirconia-ferritic steel composites
Slawik, Tim; Günther, Anne; Moritz, Tassilo; Michaelis, Alexander | Journal Article |
| 2016 | Combinatorial approaches to evaluate nanodiamond uptake and induced cellular fate
Eldawud, Reem; Reitzig, Manuela; Opitz, Jörg; Rojansakul, Yon; Jiang, Wenjuan; Nangia, Shikha; Dinu, Cerasela Zoica Oica | Journal Article |
| 2016 | Combining metal textiles with ceramics by injection molding for novel composites with promising properties
Günther, Anne; Moritz, Tassilo; Leopold, Anne-Katrin; Hofmann, Marcel; Herfert, Heike | Conference Paper |
| 2016 | A compact readout platform for spectral-optical sensors
Wuchrer, Roland; Amrehn, Sabrina; Liu, Luhao; Wagner, Thorsten; Härtling, Thomas | Journal Article |
| 2016 | Comparison of ultrasonic phased array probes based on PMN-PT and PZT 1-3 composites
Walter, Susan; Herzog, Thomas; Schubert, Frank; Heuer, Henning | Conference Paper |
| 2016 | La competencia sobre planificación de investigaciones en 4° de ESO: Un estudio de caso
Rodríguez-Arteche, Iñigo; Martínez Aznar, Ma Mercedes; Garitagoitia, Maria Aranzazu | Journal Article |
| 2016 | Consideration of inhomogeneous shrinkages for LTCC-applications in panel-level processes
Lenz, Christian; Kappert, Sandro; Ziesche, Steffen; Neubert, Holger; Partsch, Uwe | Conference Paper |
| 2016 | Correlations between suspension formulation, drying parameters, granule structure, and mechanical properties of spray dried ceramic granules
Eckhard, Susanna; Höhn, Sören; Fries, Manfred | Book Article |
| 2016 | Corrosion protection of thickness reduced plasma electrolytic layers on AZ31
Schneider, Michael; Kremmer, Kerstin; Höhn, Sören | Journal Article |
| 2016 | CPI stress induced carrier mobility shift in advanced silicon nodes
Sukharev, Valeriy; Choy, Jun-Ho; Kteyan, Armen; Hovsepyan, Henrik; Mühle, Uwe; Zschech, Ehrenfried; Radojcic, Riko | Conference Paper |
| 2016 | Crystal structure, microstructure and ionic conductivity of the cost-efficient sodium solid electrolyte Na5YSi4O12
Münchgesang, Wolfram; Wagner, Dörte; Motylenko, Mykhaylo; Langklotz, Ulrike; Nestler, Tina; Vyalikh, Anastasia; Meutzner, Falk; Rost, Axel; Schilm, Jochen; Leisegang, Tilmann; Blatov, Vladislav A.; Rafaja, David; Meyer, Dirk C. | Abstract |
| 2016 | Current Trends in Ceramic Technologies and Systems
Michaelis, Alexander; Stelter, Michael; Klemm, Hagen; Voigt, Ingolf; Kriegel, Ralf | Book Article |
| 2016 | A dedicated illumination for full-field X-ray microscopy with multilayer Laue lenses
Niese, Sven; Braun, Stefan; Dietsch, Reiner; Gluch, Jürgen; Holz, Thomas; Huber, Norman; Kubec, Adam; Zschech, Ehrenfried | Conference Paper |
| 2016 | Definition of requirements for reference experiments to determine and evaluate various damage mechanisms in fibre composites by acoustic emission
Hönig, Ulrike; Holder, Ulrich; Pietzsch, Alexander; Schulze, Eberhard; Frankenstein, Bernd; Schubert, Lars | Conference Paper |
| 2016 | Design and materials of antiferroelectric capacitors for high density power electronic applications
Engel, Guenther F. | Conference Paper |
| 2016 | Detailed study of heat generation in porous LiCoO2 electrodes
Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2016 | Determination of local resistivity in ceramic composites by electron microscopy
Sempf, Kerstin; Boese, Markus; Gnauck, Peter; Höhn, Sören; Herrmann, Mathias | Journal Article |
| 2016 | Development and characterization of a miniaturized flame ionization detector in ceramic multilayer technology for field applications
Lenz, Christian; Neubert, Holger; Ziesche, Steffen; Förster, Jan; Koch, Christian; Kuipers, Winfred; Deilmann, Michael; Jurkow, Dominik | Journal Article, Conference Paper |
| 2016 | Development of a SOFC/battery-hybrid system for distributed power generation in India
Pfeifer, Thomas; Hartmann, Mathias; Barthel, Markus; Baade, Jens; Näke, Ralf; Dosch, Christian | Conference Paper |
| 2016 | Development of photo-curable ceramic suspensions usable for additive manufacturing combined with freeze foaming
Schwarzer, Eric; Ahlhelm, Matthias; Scheithauer, Uwe; Moritz, Tassilo; Michaelis, Alexander | Conference Paper |
| 2016 | Dickschicht-Messwiderstände mit minimiertem Temperaturkoeffizienten für Präzisionssensoren zur Bestimmung der Einspeiseleistung dezentraler Energieerzeuger
Feller, Claudia; Seuthe, Thomas; Eberstein, Markus | Journal Article |
| 2016 | The dissolution mechanism of tungsten carbide under ECM conditions
Schneider, Michael; Schubert, Nora; Michaelis, Alexander | Conference Paper |
| 2016 | ECM of an SiC-based ceramic - passivation and dissolution
Schneider, Michael; Junker, Nils; Schrötke, Elena; Michaelis, Alexander | Conference Paper |
| 2016 | The effect of composition on the optical properties and hardness of transparent Al-rich MgO·nAl2O3 spinel ceramics
Wätzig, Katja; Krell, Andreas | Journal Article |
| 2016 | Effect of internal current flow during the sintering of zirconium diboride by field assisted sintering technology
Gonzales-Julian, Jesus; Jähnert, Kevin; Speer, Kerstin; Liu, Limeng; Räthel, Jan; Knapp, Michael; Ehrenberg, Helmut; Bram, Martin; Guillon, Oliver | Journal Article |
| 2016 | Effect of surface modifications on the bond strength of zirconia ceramic with resin cement resin
Hallmann, Lubica; Ulmer, Peter; Lehmann, Frank; Wille, Sebastian; Polonskyi, Oleksander; Johannes, Martina; Köbel, Stefan; Trottenberg, Thomas; Bornholdt, Sven; Haase, Fabian; Kersten, Holger; Kern, Matthias | Journal Article |
| 2016 | Energy-Filtered Backscattered Imaging Using Low-Voltage Scanning Electron Microscopy: Characterizing Blends of ZnPc-C60 for Organic Solar Cells
Cid, Aranzazu Garitagoitia; Sedighi, Mona; Löffler, Markus; Dorp, Willem F. van; Zschech, Ehrenfried | Journal Article |
| 2016 | Entwicklung einer neuen Methode zur Ansteuerung von Ultraschall-Phased Arrays
Gommlich, Andreas
: Meyendorf, Norbert (Betreuer/Gutachter); Gerlach, Gerald (Gutachter); Holstein, Peter (Gutachter); Schubert, Frank (Betreuer) | Dissertation |
| 2016 | Entwicklung einer Pro-aktiven Lötstellengeometrie-unabhängigen Lebensdauersimulation für bleifrei Lote
Metais, Benjamin; Kabakchiev, Alexander; Guyenot, Michael; Metasch, René; Röllig, Mike; Buhl, Patrick; Weihe, Stefan | Conference Paper |
| 2016 | Entwicklung eines korrosionsbeständigen Diamant-Siliciumcarbid-Werkstoffsystems für die Energietechnik - EKODISC
Blug, B.; Hörner, M.; Walter, M.; Hollstein, T.; Matthey, B.; Herrmann, M.; Kunze, S.; Striegler, M.; Fries, M.; Armgardt, M.; Harig, T.; Höfer, M.; Schäfer, L. | Report |
| 2016 | Entwicklung neuartiger thermoelektrischer Module für automotive und industrielle Anwendungen
Niedermeyer, Lars; Augsburg, Klaus; Wodtke, Axel; Rebenklau, Lars; Grießmann, Horst; Gierth, Paul; Irrgang, Klaus; Lippmann, Lutz; Bechtold, Franz | Conference Paper |
| 2016 | Entwicklung von SiSiC-Strukturkeramiken aus Reaktionsharzbeton
Kunze, Steffen
: Michaelis, Alexander (Gutachter); Hufenbach, Werner A. (Gutachter) | Dissertation |
| 2016 | Entwicklung wirtschaftlich effizienter Hartmetallbeschichtungslösungen für Hochtemperaturanwendungen. Teil 2: Einfluss von Wärmebehandlungen und tribologische Untersuchungen
Berger, Lutz-Michael; Trache, Richard; Toma, Filofteia-Laura; Thiele, Sven; Norpoth, Jonas; Janka, Leo | Journal Article |
| 2016 | Equipment, material and processes for UV-DLP-based additive manufacturing of two-component ceramic green bodies and dense structures
Springer, Patrick; Schwarzer, Eric; Refle, Oliver; Richter, Hans-Jürgen | Conference Paper |
| 2016 | Evaluation of alumina as protective coating for carbon fibers in aluminum-based composites
Krug, Mario; Abidin, Alfaferi Zainal; Höhn, Mandy; Kozera, Rafał; Malczyk, Piotr; Endler, Ingolf; Michaelis, Alexander | Conference Paper |
| 2016 | Experimental investigations of TiAl-brazes for ceramic joining
Martin, Hans-Peter; Triebert, Anke | Conference Paper |
| 2016 | An explanation of the microcrack formation in Li1.3Al0.3Ti1.7(PO4)3 ceramics
Wätzig, Katja; Rost, Axel; Langklotz, Ulrike; Matthey, Björn; Schilm, Jochen | Journal Article |
| 2016 | Fabrication and characterization of a 20 MHz ultrasonic transducer using soft mold process
Günther, Paul; Gebhardt, Sylvia; Neubert, Holger; Herzog, Thomas; Heuer, Henning; Walter, Susan | Poster |
| 2016 | Fast evaluation of biopsy for prostate cancer diagnosis by Fraunhofer IKTS
Lehmann, Andreas; Opitz, Jörg | Abstract |
| 2016 | FAST/Flash eröffnet neue Perspektiven für die industrielle Anwendung des feldunterstützten Sinterns
Hennicke, Jürgen; Herrmann, Mathias; Kessel, Tobias; Räthel, Jan | Journal Article |
| 2016 | FIB sample preparation for X-ray microscopy and ROI target cross-sectioning
Zschech, Ehrenfried; Gluch, Jürgen; Rosenkranz, Rüdiger; Standke, Yvonne; Niese, Sven | Abstract |
| 2016 | First special issue of case study in nondestructive testing and evaluation. Editorial
Köhler, Bernd | Journal Article |
| 2016 | Foreword to the special section on "Stress-Induced Phenomena in Microelectronics"
Ho, Paul S.; Zschech, Ehrenfried | Abstract |
| 2016 | Formation of secondary borides in liquid phase-sintered B6O materials
Thiele, Maik; Herrmann, Mathias; Müller, Christin; Michaelis, Alexander | Journal Article |
| 2016 | Fraunhofer Institute for Ceramic Technologies and Systems. Annual Report 2015/2016
| Annual Report |
| 2016 | Fraunhofer-Institut für Keramische Technologien und Systeme. Jahresbericht 2015/2016
| Annual Report |
| 2016 | Full polymer dielectric elastomeric actuators (DEA) functionalised with carbon nanotubes and high-K ceramics
Köckritz, Tilo; Luther, René; Paschew, Georgi; Jansen, Irene; Richter, Andreas; Jost, Oliver; Schönecker, Andreas; Beyer, Eckhard | Journal Article |
| 2016 | Functional metal ceramic composites: Application of coating technologies for the composite production
Zelm, Roland; Greiffenberg, Ina; Großmann, Harald J.; Slawik, Tim; Günther, Anne; Moritz, Tassilo; Michaelis, Alexander | Journal Article |
| 2016 | Functionalization and large scale assembly of carbon nanotubes
Majumder, Anindya
: Cuniberti, Gianaurelio (1. Gutachter); Bock, Karlheinz (2. Gutachter); Opitz, Jörg (Betreuer) | Dissertation |
| 2016 | Functionally graded materials made by water-based multilayer technology
Scheithauer, Uwe; Schwarzer, Eric; Slawik, Tim; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Journal Article |
| 2016 | Fundamental limitations at the determination of initial yield stress using nano-indentation with spherical tips
Clausner, André; Richter, Frank | Journal Article |
| 2016 | Ga contamination in silicon by focused ion beam milling: Dynamic model simulation and atom probe tomography experiment
Huang, J.; Löffler, M.; Möller, W.; Zschech, Ehrenfried | Journal Article, Conference Paper |
| 2016 | Gefrierschäume - Entwicklung von zellularen Strukturen für vielfältige Anwendungen
Ahlhelm, Matthias
: Michaelis, Alexander (Hrsg.); Heinrich, Jürgen (Betreuer); Moritz, Tassilo (Betreuer) | Dissertation |
| 2016 | Gefügeausbildung und Eigenschaften von nanoskaligen binderfreien Hartmetallen
Pötschke, Johannes
: Michaelis, Alexander (Hrsg.) | Dissertation |
| 2016 | Glass ceramic separators for room temperature operating sodium batteries
Wagner, Dörte; Rost, Axel; Schilm, Jochen; Fritsch, Marco; Kusnezoff, Mihails; Michaelis, Alexander | Conference Paper |
| 2016 | Grain boundary segregation in sintered materials: Effect on densification and grain growth
Lay, Sabine; Guyon, Audrey; Chaix, Jean-Marc; Carry, Claude; Pötschke, Johannes | Conference Paper |
| 2016 | Herstellung von dünnen mischleitenden Ba0,5Sr0,5Co0,8Fe02O3-δ-Membranen mit hoher Sauerstoffpermeation auf porösen rohrförmigen Trägern im Cofiring
Pippardt, Ute; Bernhardt, Matthias; Böer, Jürgen; Kiesel, Lutz; Kircheisen, Robert; Kriegel, Ralf; Voigt, Ingolf; Weyd, Marcus | Journal Article |
| 2016 | Herstellung, Modifizierung und Charakterisierung von borcarbidbasierten Keramiken als Thermoelektrikum
Feng, Bing
: Michaelis, Alexander (Gutachter); Lippmann, Wolfgang (Gutachter); Kieback, Bernd | Dissertation |
| 2016 | High performance silver polymer pastes for SHJ cells
Körner, Stefan; Waltinger, Andreas; Partsch, Uwe; Eberstein, Markus | Presentation |
| 2016 | High resolution radio frequency inspection of carbon fiber composites
Heuer, Henning; Schulze, Martin; Pooch, Matthias | Conference Paper |
| 2016 | Highly efficient and long-term stable micro fuel cell system based on ceramic multilayer technology
Goldberg, Adrian; Röntzsch, Lars; Pohlmann, Carsten; Freytag, Christian; Tagne Saha, Ariel Thierry; Ziesche, Steffen; Partsch, Uwe | Conference Paper |
| 2016 | Hochtemperatur-Stabilität optikrelevanter Eigenschaften von transparenter MgAl2O4-Spinell-Keramik
Reichel, Uwe; Notni, Gunther; Duparré, Angela; Müller, F.A.; König, Stefan; Herold, Volker | Book Article |
| 2016 | HOT-300 - a multidisciplinary technology approach targeting microelectronic systems at 300 °C operating temperature
Vogt, Holger; Altmann, Frank; Braun, Sebastian; Celik, Yusuf; Dietrich, Lothar; Dietz, Dorothee; Dijk, Marius van; Dreiner, Stefan; Döring, Ralf; Gabler, Felix; Goehlich, Andreas; Hutter, Matthias; Ihle, Martin; Kappert, Holger; Kordas, Norbert; Kokozinski, Rainer; Naumann, Falk; Nowak, Torsten; Oppermann, Hermann; Partsch, Uwe; Petzold, Matthias; Roscher, Frank; Rzepka, Sven; Schubert, Ralph; Weber, Constanze; Wiemer, Maik; Wittler, Olaf; Ziesche, Steffen | Conference Paper |
| 2016 | A hybrid phenomenological model for ferroelectroelastic ceramics. Part I: Single phased materials
Stark, Sebastian; Neumeister, Peter; Balke, Herbert | Journal Article |
| 2016 | A hybrid phenomenological model for ferroelectroelastic ceramics. Part II: Morphotropic PZT ceramics
Stark, Sebastian; Neumeister, Peter; Balke, Herbert | Journal Article |
| 2016 | Improvement of interface between electrolyte and electrodes in solid oxide electrolysis cell
Trofimenko, Nikolai; Kusnezoff, Mihails; Michaelis, Alexander | Conference Paper |
| 2016 | In-operando Temperaturmessung bei der plasmaelektrolytischen Oxidation von Aluminium
Voigt, Karsten; Lämmel, Christoph; Schneider, Michael | Conference Paper |
| 2016 | Influence of electrode design and contacting layers on performance of electrolyte supported SOFC/SOEC single cells
Kusnezoff, Mihails; Trofimenko, Nikolai; Müller, Martin; Michaelis, Alexander | Journal Article |
| 2016 | Influence of heat treatment on the abrasive wear resistance of a Cr3C2-NiCr coating deposited by an ethene-fuelled HVOF spray process
Janka, Leo; Norpoth, Jonas; Trache, Richard; Berger, Lutz-Michael | Journal Article |
| 2016 | Influence of PAN-fiber stretching during thermal treatment on the stabilization reactions
Meinl, Juliane; Kirsten, Martin; Cherif, Chokri; Michaelis, Alexander | Journal Article |
| 2016 | Influence of the polarization anisotropy on the electrocaloric effect in epitaxial PMN-PT thin films
Mietschke, Michael; Chekhonin, Paul; Molin, Christian; Gebhardt, Sylvia; Fähler, Sebastian; Nielsch, Kornelius; Schultz, Linda; Hühne, Ruben | Journal Article |
| 2016 | The influence of the synthesis route on electrochemical properties of spinel type high-voltage cathode material LiNi0.5Mn1.5O4 for lithium ion batteries
Seidel, Matthias; Nikolowski, Kristian; Wolter, Mareike; Kinski, Isabel; Michaelis, Alexander | Conference Paper |
| 2016 | Innovative and novel manufacturing methods of ceramics and metal-ceramic composites for biomedical applications
Ahlhelm, Matthias; Günther, Paul; Scheithauer, Uwe; Schwarzer, Eric; Günther, Anne; Slawik, Tim; Moritz, Tassilo; Michaelis, Alexander | Journal Article |
| 2016 | Integration of high-frequency M-type hexagonal ferrite inductors in LTCC multilayer modules
Bierlich, Silvia; Reimann, Timmy; Barth, Stefan; Capraro, Beate; Bartsch, Heike; Müller, Jens; Töpfer, Jörg | Journal Article |
| 2016 | Integrative evaluation of automated massage combined with thermotherapy: physical, physiological, and psychological viewpoints
Kim, Dowon; Lee, Daewoon; Schreiber, Jürgen; Im, Changhwan; Kim, Hansung | Journal Article |
| 2016 | An interlaboratory comparison of nanosilver characterisation and hazard identification: Harmonising techniques for high quality data
Jemec, Anita; Kahru, Anne; Potthoff, Annegret; Drobne, Damjana; Heinlaan, Margit; Böhme, Steffi; Geppert, Mark; Novak, Sara; Schirmer, Kristin; Rekulapally, Rohit; Singh, Shashi; Aruoja, Villem; Sihtmäe, Mariliis; Juganson, Katre; Käkinen, Aleksandr; Kühnel, Dana | Journal Article |
| 2016 | Joining of ceramic Ba0.5Sr0.5Co0.8Fe0.2O3 membranes for oxygen production to high temperature alloys
Kiebach, Ragnar; Engelbrecht, Kurt L.; Kwok, Kawai; Molin, Sebastian M.; Søgaard, Martin; Niehoff, Patrick; Schulze-Küppers, Falk; Kriegel, Ralf; Kluge, Jens; Hendriksen, Peter Vang | Journal Article |
| 2016 | Joining technologies for a temperature-stable integration of a LTCC-based pressure sensor
Schilm, Jochen; Goldberg, Adrian; Partsch, Uwe; Dürfeld, Wolfgang; Arndt, Dietmar; Pönicke, Andreas; Michaelis, Alexander | Journal Article |
| 2016 | Keramik für Filtrationsanwendungen
Adler, Jörg; Kriegel, Ralf; Petasch, Uwe; Richter, Hannes; Voigt, Ingolf; Weyd, Marcus | Journal Article |
| 2016 | Kohlenstroffmembran, Verfahren zur Herstellung von Kohlenstoffmenbranen und deren Verwendung
Richter, Hannes; Kämnitz, Susanne; Voigt, Ingolf; Grützner, Jörg; Martin, Dirk | Patent |
| 2016 | Konform temperierter Fluidmischer
Pohl, Markus; Gradmann, Rena; Scheithauer, Uwe; Eberstein, Markus | Poster |
| 2016 | Laser Speckle Photometry (LSP) - optical sensor system for monitoring of material condition and processing
Cikalova, Ulana; Bendjus, Beatrice; Sudip, Shohag Roy; Chen, Lili | Conference Paper |
| 2016 | Laser-akustische Messtechnik in der Materialcharakterisierung
Windisch, Thomas
: Meyendorf, Norbert (Gutachter / Betreuer); Gerlach, Gerald (Gutacher); Burgholzer, Peter (Gutacher) | Dissertation |
| 2016 | Long-term compositional/microstructural development of Cr3C2-NiCr coatings at 500 °C, 700 °C and 900 °C
Matthews, Steven; Berger, Lutz-Michael | Journal Article |
| 2016 | Low cost, ceramic battery components and cell design
Weidl, Roland; Schulz, Matthias; Hofacker, Martin; Dohndorf, Heidi; Stelter, M. | Conference Paper |
| 2016 | LTCC - packaging of a laser optical system for harsh environments
Ihle, Martin; Ziesche, Steffen; Beckert, Erik; Hornaff, Marcel | Conference Paper |
| 2016 | Manufacturing and properties of polycrystalline WC-Co based cemented carbides
Pötschke, Johannes; Richter, Volkmar; Mayer, Markus | Conference Paper |
| 2016 | Material and ingenious synthesis strategy for short-wavelength infrared light-emitting device
Fu, Jipeng; Zhang, Su; Pang, Ran; Jia, Yonglei; Sun, Wenzhi; Li, Haifeng; Jiang, Lihong; Li, Chengyu | Journal Article |
| 2016 | Materialdiagnose und integrale Prüfverfahren für keramische Bauteile
Opitz, Jörg; Wunderlich, Christian; Bendjus, Beatrice; Cikalova, Ulana; Wolf, Christian; Naumann, Sascha; Lehmann, Andreas; Barth, Martin; Duckhorn, Frank; Köhler, Bernd; Tschöke, Kilian; Tschöpe, Constanze; Moritz, Tassilo; Scheithauer, Uwe; Windisch, Thomas | Journal Article |
| 2016 | Materials and technologies to enable high temperature stable MEMS and electronics for smart systems used in harsh environments
Gabler, Felix; Roscher, Frank; Döring, Ralf; Otto, Alexander; Ziesche, Steffen; Ihle, Martin; Celik, Yusuf; Dietz, Dorothee; Goehlich, Andreas; Kappert, Holger; Vogt, Holger; Naumann, Falk; Geßner, Thomas | Conference Paper |
| 2016 | Mechanical characterization of porous nano-thin films by use of atomic force acoustic microscopy
Kopycinska-Müller, Malgorzata; Clausner, André; Yeap, Kong Boon Oon; Köhler, Bernd; Kuzeyeva, Nataliya; Mahajan, Sukesh; Savage, Travis; Zschech, Ehrenfried; Wolter, Klaus-Jürgen | Journal Article |
| 2016 | Mechanism of gas separation through amorphous silicon oxycarbide membranes
Prasad, Ravi Mohan; Jüttke, Yvonne; Richter, Hannes; Voigt, Ingolf; Riedel, Ralf; Gurlo, Aleksander | Journal Article |
| 2016 | Medizinische Komponenten und Design-Artikel aus Keramik - hergestellt mit additiver Fertigungstechnik
Moritz, Tassilo; Scheithauer, Uwe; Schwarzer, Eric; Ahlhelm, Matthias | Journal Article |
| 2016 | Melatonin suppresses autophagy induced by clinostat in preosteoblast MC3T3-E1 cells
Yoo, Yeong-Min; Han, Tae-Young; Kim, Han Sung | Journal Article |
| 2016 | Melatonin-mediated intracellular insulin during 2-deoxy-D-glucose treatment is reduced through autophagy and EDC3 protein in insulinoma INS-1E cells
Kim, Han Sung; Han, Tae-Young; Yoo, Yeong-Min | Journal Article |
| 2016 | Membrane electrolysis - a promising technology for mine water treatment, radionuclide separation, and extraction of valuable metals
Friedrich, H.J. | Conference Paper |
| 2016 | Messverfahren zur thermo-mechanischen Charakterisierung von Werkstoffen der Hochtemperatur-AVT
Metasch, René; Klemm, Alexander; Röllig, Mike; Zerna, Thomas | Conference Paper |
| 2016 | A method for analysing the die filling behaviour of ceramic granules
Glöß, Bianca; Fries, Manfred | Journal Article |
| 2016 | Micro-Reactors made by lithography-based ceramic manufacturing (LCM)
Scheithauer, Uwe; Schwarzer, Eric; Ganzer, Gregor; Körnig, André; Beckert, Wieland; Reichelt, Erik; Jahn, Matthias; Härtel, Anja; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Conference Paper |
| 2016 | A model for statistical electromigration simulation with dependence on capping layer and Cu microstructure in two dimensions
Kraatz, Matthias; Gall, Martin; Zschech, Ehrenfried; Schmeißer, Dieter; Ho, Paul S. | Journal Article |
| 2016 | Modified differential scanning calorimeter for direct electrocaloric measurements
Sanlialp, Mehmet; Molin, Christian; Shvartsman, Vladimir V.; Gebhardt, Sylvia; Lupascu, Doru Constantin | Journal Article |
| 2016 | Monolithischer statischer Mischer und/oder katalytisch wirkendes Element sowie Verfahren zur Herstellung
Scheithauer, Uwe; Reichelt, Erik; Beckert, Wieland; Schwarzer, Eric; Pohl, Markus | Patent |
| 2016 | Multi-material approach to integrate ceramic boxed temperature-sensitive components in laser beam melted structures for bio and other applications
Lausch, Holger; Töppel, Thomas; Petters, Romy; Gronde, Bernd; Herrmann, Mathias; Funke, Kerstin | Conference Paper |
| 2016 | Multi-scale radiographic applications in microelectronic industry
Gluch, Jürgen; Löffler, Markus; Meyendorf, Norbert G.; Oppermann, Martin; Röllig, Mike; Sättler, P.; Wolter, Klaus-Jürgen; Zschech, Ehrenfried | Conference Paper |
| 2016 | Nanomaterial-modified flexible micro-electrode array by electrophoretic deposition of carbon nanotubes
Winkin, Nadine; Gierth, Uta; Mokwa, Wilfried; Schneider, Michael | Journal Article |
| 2016 | Nanomonitoring of ceramic surface
Lapina, V.A.; Pershukevich, P.P.; Pavich, T.A.; Bushuk, S.B.; Opitz, Jörg | Conference Paper |
| 2016 | NDE applications in microelectronic industries
Meyendorf, Norbert; Oppermann, Martin; Krüger, Peter; Röllig, Mike; Wolter, Klaus-Jürgen | Conference Paper |
| 2016 | New lightweight kiln furniture - Production processes and properties
Scheithauer, Uwe; Slawik, Tim; Schwarzer, Eric; Tscharntke, Franziska; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Conference Paper |
| 2016 | Non-covalent modified multi-walled carbon nanotubes: Dispersion capabilities and interactions with bacteria
Khazaee, Maryam; Majumder, Anindya; Baraban, Larysa; Cuniberti, Gianaurelio; Opitz, Jörg; Ye, Dan | Journal Article |
| 2016 | Non-destructive imaging of organosilicate glass (OSG) thin films at low voltage with the EsB detector
Garitagoitia, Maria Aranzazu; Moayedi, Elham; Rosenkranz, Rüdiger; Clausner, André; Pakbaz, Khashayar; Zschech, Ehrenfried | Journal Article |
| 2016 | Nondestructive cell evaluation techniques in SOFC stack manufacturing
Wunderlich, Christian | Conference Paper |
| 2016 | Novel approaches to determine thermomechanical materials data in advanced interconnect stacks
Zschech, Ehrenfried; Gall, Martin; Clausner, André; Sander, Christoph; Sukharev, Valeriy | Conference Paper |
| 2016 | A novel dichromic self-referencing optical probe SrO:Bi(3+),Eu(3+) for temperature spatially and temporally imaging
Fu, Jipeng; Pang, Ran; Jiang, Lihong; Jia, Yonglei; Sun, Wenzhi; Zhang, Su; Li, Chengyu | Journal Article |
| 2016 | A novel piezoelectric fibre patch transducer for shear horizontal wave modes
Köhler, Bernd; Gaul, Tobias; Schubert, Frank; Lieske, Uwe | Conference Paper |
| 2016 | Novel polycrystalline WC-Co based cemented carbides and their properties
Pötschke, Johannes; Richter, Volkmar; Mayer, Markus | Conference Paper |
| 2016 | Offshore foundation monitoring by guided waves - challenges and perspectives
Weihnacht, Bianca; Frankenstein, Bernd; Gaul, Tobias; Neubeck, Robert; Schubert, Lars | Conference Paper |
| 2016 | On determination of focal laws for linear phased array probes as to the active and passive element size
Gommlich, Andreas; Schubert, Frank | Conference Paper |
| 2016 | On the strength and failure of an electrolyte supported solid oxide fuel cell
Fleischhauer, Felix
: Danzer, Robert (Betreuer); Michaelis, Alexander (Gutachter) | Dissertation |
| 2016 | Optical electron beam dosimetry with ceramic phosphors as passive sensor material for broad dose ranges
Reitzig, Manuela; Goodband, Rachel; Schuster, Christiane; Härtling, Thomas | Journal Article |
| 2016 | Optimisation methods for the determination of cyclic material parameters from strain controlled uniaxial fatigue tests
Fuhrmann, Katrin; Neumeister, Peter; Eulitz, Klaus-Georg | Journal Article |
| 2016 | Optimization of the SEM working conditions: EsB detector at low voltage
Cid, Aranzazu Garitagoitia; Rosenkranz, Rüdiger; Zschech, Ehrenfried | Journal Article |
| 2016 | Oxidized carbo-iron causes reduced reproduction and lower tolerance of juveniles in the amphipod Hyalella azteca
Weil, Mirco; Meißner, Tobias; Springer, Armin; Bundschuh, Mirco; Hübler, Lydia; Schulz, Ralf; Duis, Karen | Journal Article |
| 2016 | Platinum electrodeposition from a dinitrosulfatoplatinate(II) electrolyte
Weiser, Mathias; Schulze, Claudia; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2016 | PMN-8PT device structures for electrocaloric cooling applications
Molin, Christian; Gebhardt, Sylvia | Conference Paper, Journal Article |
| 2016 | Pollen structure visualization using high-resolution laboratory-based hard X-ray tomography
Li, Qiong; Gluch, Jürgen; Krüger, Peter; Gall, Martin; Neinhuis, Christoph; Zschech, Ehrenfried | Journal Article |
| 2016 | Potential improvements of the presently applied in-service inspection of wheelset axles
Kappes, Wolfgang; Hentschel, Dieter; Oelschlägel, Thomas | Journal Article |
| 2016 | Preface. Advances in solid oxide fuel cells and electronic ceramics
Bansal, Narottam P.; Kusnezoff, Mihails; Shimamura, Kiyoshi | Conference Paper |
| 2016 | Processing of thermoplastic suspensions for additive manufacturing of ceramic- and metal-ceramic-composites by thermoplastic 3D-printing (T3DP)
Scheithauer, Uwe; Schwarzer, Eric; Härtel, Anja; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Conference Paper |
| 2016 | Properties of retinal precursor cells grown on vertically aligned multiwalled carbon nanotubes generated for the modification of retinal implant-embedded microelectrode arrays
Johnen, Sandra; Meißner, Frank; Krug, Mario; Baltz, Thomas; Endler, Ingolf; Mokwa, Wilfried; Walter, Peter M. | Journal Article |
| 2016 | Quantifying voids effecting delamination in carbon/epoxy composites: static and fatigue fracture behavior
Hakim, I.; May, D.; Ras, M.; Meyendorf, Norbert; Donaldson, Steven L. | Conference Paper |
| 2016 | Robust and reliable encapsulation of electronics for underwater applications
Schwerz, Robert; Röllig, Mike; Frankenstein, Bernd | Conference Paper |
| 2016 | A ruthenium racemisation catalyst for the synthesis of primary amines from secondary amines
Pingen, Dennis; Altıntaş, Çiğdem; Schaller, Max Rudolf; Vogt, Dieter | Journal Article |
| 2016 | Schichten aus Kohlenstoff-Nanomaterialien auf asymmetrisch porösen, keramischen Trägern und deren Erprobung für Anwendungen in Membrantechnik und Katalyse
Simon, Adrian
: Ritter, Uwe (Betreuer); Rädlen, Edda (Gutachter); Voigt, Ingolf (Gutachter) | Dissertation |
| 2016 | Semi-automated inspection unit for ceramics
Wolf, Christian; Lehmann, Andreas; Unglaube, Gregor | Conference Paper |
| 2016 | Shear horizontal piezoelectric fiber patch transducers (SH-PFP) for guided elastic wave applications
Köhler, Bernd; Gaul, Tobias; Lieske, Uwe; Schubert, Frank | Journal Article |
| 2016 | Shear horizontal ultrasonic waves excited by piezoelectric fiber patches
Köhler, Bernd; Gaul, Tobias; Lieske, Uwe; Schubert, Frank | Conference Paper |
| 2016 | Sliding and abrasive wear behaviour of HVOF- and HVAF-sprayed Cr3C2-NiCr hardmetal coatings
Bolelli, Giovanni; Berger, Lutz-Michael; Börner, Tim; Koivuluoto, Heli; Matikainen, V.; Lusvarghi, Luca; Lyphout, Christophe; Markocsan, Nicolaie; Nylén, Per E.; Sassatelli, Paolo; Trache, Richard; Vuoristo, Petri | Journal Article |
| 2016 | SoC dependent kinetic parameters of insertion electrodes from StairCase - GITT
Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2016 | Sodiation vs. Lithiation of FePO4: A comparative kinetic study
Heubner, Christian; Heiden, Sebastian; Matthey, Björn; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2016 | SOFC system development and held trials for commercial applications
Pfeifer, Thomas; Reuber, Sebastian; Hartmann, Mathias; Barthel, Markus; Baade, Jens | Conference Paper |
| 2016 | Some aspects of macroscopic phenomenological material models for ferroelectroelastic ceramics
Stark, Sebastian; Neumeister, Peter; Balke, Herbert | Journal Article |
| 2016 | Spark plasma sintering novel tooling design: Temperature uniformization during consolidation of silicon nitride powder
Giuntini, Diletta; Räthel, Jan; Herrmann, Mathias; Michaelis, Alexander; Haines, Christopher D.; Olevsky, Eugene Al | Journal Article |
| 2016 | Sprödbruchrisiko an keramischen Bauelementen in Abhängigkeit vom Hochtemperatur-Lotwerkstoff und der Beanspruchungsgeschwindigkeit
Dudek, Rainer; Hildebrandt, Marcus; Rzepka, Sven; Röllig, Mike; Trodler, Jörg | Conference Paper |
| 2016 | Status of SOFC/SOEC stack and system development and commercialization activities at Fraunhofer IKTS
Kusnezoff, Mihails; Megel, Stefan; Jahn, Matthias; Pfeifer, Thomas; Baade, Jens | Conference Paper |
| 2016 | A SThM probe optimization and its time-space multi-scale modeling
Lenczner, Michel; Yang, Bin; Bontempi, Alexia; Teyssieux, Damien; Cogan, Scott D.; Janus, Pawel; Köhler, Bernd; Ratier, Nicolas E. | Journal Article |
| 2016 | Structural and ferroelectric properties of 0.9PMN-0.1PT thin films
Mietschke, Michael; Engelhardt, Stefan; Fähler, Sebastian; Molin, Christian; Gebhardt, Sylvia; Schultz, Ludwig; Hühne, Ruben | Conference Paper |
| 2016 | Structural and ferroelectric properties of epitaxial BaZrxTi1-xO3 thin films
Engelhardt, Stefan; Mietschke, Michael; Molin, Christian; Gebhardt, Sylvia; Fähler, Sebastian; Nielsch, Kornelius; Hühne, Ruben | Journal Article |
| 2016 | Structural characterisation of carbon fibres along the fabrication process using SEM/FIB and TEM
Mühle, Uwe; Standke, Yvonne; Zschech, Ehrenfried; Meinl, Juliane; Michaelis, Alexander; Kirsten, Martin; Cherif, Chokri | Conference Paper |
| 2016 | Study of mechanical behavior of AFM silicon tips under mechanical load
Kopycinska-Müller, Malgorzata; Gluch, Jürgen; Köhler, Bernd | Journal Article |
| 2016 | Symposium Anodisieren - Oxidschichten von hart bis smart 2016
: Michaelis, Alexander; Schneider, Michael | Conference Proceedings |
| 2016 | Synthesis of plasmonic Cu2-xSe@ZnS Core@Shell nanoparticles
Wolf, Andreas; Härtling, Thomas; Hinrichs, Dominik; Dorfs, Dirk | Journal Article |
| 2016 | Systementwicklung zur Strukturüberwachung mit geführten Wellen
Schubert, Lars; Weihnacht, Bianca; Lieske, Uwe; Frankenstein, Bernd; Gebhardt, Sylvia; Neumeister, Peter; Neubert, Holger | Conference Paper |
| 2016 | Tailored composite transducers based on piezoceramic fibres and pearls
Hohlfeld, Kai; Neumeister, Peter; Michaelis, Alexander; Gebhardt, Sylvia | Conference Paper |
| 2016 | Technologien zur zuverlässigen und effizienten Prüfung von Unterwasser-Tragstrukturen an Offshore-Windenergieanlagen
Weihnacht, Bianca | Report |
| 2016 | Technology readiness of SOFC stacks technology - A review
Wunderlich, Christian | Conference Paper |
| 2016 | TEM investigation of barrier-like anodic oxide films on aluminum
Schneider, Michael; Lämmel, Christoph; Hübner, Ralf; Gierth, Uta; Michaelis, Alexander | Journal Article, Conference Paper |
| 2016 | TEM investigation of time-dependent dielectric breakdown mechanisms in Cu/Low-k interconnects
Liao, Zhongquan; Gall, Martin; Yeap, Kong Boon; Sander, Christoph; Clausner, André; Mühle, Uwe; Gluch, Jürgen; Standke, Yvonne; Rosenkranz, Rüdiger; Aubel, Oliver; Hauschildt, Meike; Zschech, Ehrenfried | Journal Article |
| 2016 | Temperature control of an SThM micro-probe with an heat source estimator and a lock-in measurement
Lenczner, Michel; Yang, Bin; Cogan, Scott D.; Domas, Stêphane; Ke, D.; Couturier, Raphaël; Renault, D.; Köhler, Bernd; Janus, Pawel | Conference Paper |
| 2016 | Theoretische und experimentelle Untersuchungen zu Stofftransport und Druckverlust in geschütteten und strukturierten Festbetten
Reichelt, Erik
: Lange, Rüdiger (Gutachter); Landmesser, Holger (Gutachter); Michaelis, Alexander (Ed.) | Dissertation |
| 2016 | Thermisch-elektrochemische in-operando Untersuchungen zur lokalen Wärmeentwicklung in Lithiumionenbatteriezellen
Heubner, Christian
: Michaelis, Alexander | Dissertation |
| 2016 | Thermische Analysen und Bestimmungen thermophysikalischer Eigenschaften von Materialien und Bauteilen
Gestrich, Tim | Conference Paper |
| 2016 | Three dimensional image-based simulation of ultrasonic wave propagation in polycrystalline metal using phase-field modeling
Nakahataa, K.; Sugahara, H.; Barth, Martin; Köhler, Bernd; Schubert, Frank | Journal Article |
| 2016 | TiOx-based thermoelectric modules: Manufacturing, properties, and operational behavior
Martin, Hans-Peter; Pönicke, Andreas; Kluge, Martin; Sichert, Ina; Rost, Axel; Conze, Susan; Wätzig, Katja; Schilm, Jochen; Michaelis, Alexander | Journal Article |
| 2016 | TiSiCN nanocomposite hard coatings by CVD
Höhn, Mandy; Endler, Ingolf; Matthey, Björn | Conference Paper |
| 2016 | Tool technologies for milling of hardmetals and ceramics
Bergs, Thomas; Richter, Volkmar; Ottersbach, Michael; Pötschke, Johannes; Hochmuth, Carsten; Busch, Katja | Conference Paper |
| 2016 | Towards fabrication of high frequency ultrasonic transducers using soft mold process
Gebhardt, Sylvia; Günther, Paul; Neubert, Holger; Fröhlich, Selina; Walter, Susan; Herzog, Thomas; Heuer, Henning | Conference Paper |
| 2016 | Transparent alumina ceramics densified by a combinational approach of spark plasma sintering and hot isostatic pressing
Trunec, Martin; Klimke, Jens; Shen, Zhijian-James | Journal Article |
| 2016 | Transparent ceramics at 50: Progress made and further prospects
Goldstein, Adrian; Krell, Andreas | Journal Article |
| 2016 | Transparent front side contact pastes for high efficiency SHJ-solar cells
Körner, Stefan; Waltinger, Andreas; Eberstein, Markus | Presentation |
| 2016 | Transparent MgAl2O4/LiF ceramics by hot-pressing: Host-additive interaction mechanisms issue revisited
Goldstein, Adrian; Räthel, Jan; Katz, Michael; Berlin, Mila; Galun, Ehud | Journal Article |
| 2016 | Transportables Messgerät zum Prüfen einer Probe mittels Ultraschall
Schiller-Bechert, David Maximilian; Macher, Frank | Patent |
| 2016 | Untersuchung wärmebedingter Beeinträchtigungen der Schichteigenschaften beim Hartanodisieren
Lämmel, Christoph; Schneider, Michael; Heubner, Christian; Michaelis, Alexander | Conference Paper |
| 2016 | Untersuchungen zu mikroskopischen und makroskopischen Grünkörperfehlern bei der uniaxialen Pressverdichtung
Svoboda, Hermann
: Michaelis, Alexander (1. Gutachter); Falk, Guido (2. Gutachter); Fries, Manfred (Betreuer) | Dissertation |
| 2016 | Using a Newman-based battery model and post mortem analysis to develop a non-destructive method for SoH estimation
Schledde, D.; Leiva, D.; Schwalm, M.; Puchta, M.; Nikolowski, K.; Wolter, M. | Poster |
| 2016 | Validation of an ultrasonic-phased array method for testing of circumferential welds at thin-walled pipes
Hillmann, Susanne; Schubert, Frank; Brosius, David Maximilian; Bor, Zsolt | Journal Article |
| 2016 | Validation of an ultrasonic-phased-array-method for testing of circumferential welds at thin-walled pipes
Hillmann, Susanne; Schubert, Frank; Schiller-Bechert, David-Maximilian; Bor, Zsolt | Conference Paper |
| 2016 | Verfahren und Anordnung zur Erzeugung und thermischen Kompression von Sauerstoff
Kriegel, Ralf; Kircheisen, Robert; Sonnenberg, Claudia; Schulz, Matthias | Patent |
| 2016 | Verfahren und System zum Bestimmen einer mechanischen Verformung und/oder eines Defekts eines Probekörpers
Schulze, Martin; Heuer, Henning | Patent |
| 2016 | Verfahren zur Detektion von Fehlern oder Defekten an Bauteilen unter Einsatz von Ultraschallwandlern
Joneit, Dieter; Walter, Susan | Patent |
| 2016 | Verfahren zur Herstellung dichter Bauteile aus Zirkoncarbid und mit dem Verfahren hergestellte Bauteile
Schönfeld, Katrin; Martin, Hans-Peter | Patent |
| 2016 | Verfahren zur Herstellung eines Silber enthaltenden Glaspulvers sowie die Verwendung des Glaspulvers
Körner, Stefan; Eberstein, Markus | Patent |
| 2016 | Verfahren zur Herstellung und Überprüfung von Werkstücken und Werkstück
Härtling, Thomas; Schuster, Christiane | Patent |
| 2016 | Werkstoff bei dem in eine Siliciumnitrid-Matrix-Diamant- oder cBN-Partikel als Hartstoff eingebettet sind, und Verfahren zu seiner Herstellung
Zschippang, Eveline; Wolfrum, Anne-Kathrin; Herrmann, Mathias | Patent |
| 2016 | Zuverlässigkeitsuntersuchungen an organischen Leiterplatten mit dickem Kupferkern für leistungselektronische Anwendungen
Meier, Karsten; Röllig, Mike; Bock, Karlheinz | Conference Paper |
| 2015 | Activation of mTOR for the loss of skeletal muscle in a hindlimb-suspended rat model
Yoo, Yeong-Min; Park, Ji Hyung; Seo, Dong-Hyun; Eom, Sinae; Jung, Young Jin; Kim, Tack-Joong; Han, Tae-Young; Kim, Han Sung | Journal Article |
| 2015 | Adapting the co-sintering behaviour of metal-ceramic composites
Slawik, Tim; Günther, Anne; Scheithauer, Uwe; Scholl, Roland; Schwarzer, Eric; Moritz, Tassilo; Michaelis, Alexander | Conference Paper |
| 2015 | Additive Fertigung von Hartmetallen: Druck von komplexen Hartmetallwerkzeugen
Pötschke, Johannes | Journal Article |
| 2015 | Additive manufacturing of metal-ceramic-composites by thermoplastic 3D-printing (3DTP)
Scheithauer, Uwe; Slawik, Tim; Schwarzer, Eric; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Journal Article |
| 2015 | Advancement of tooling for spark plasma sintering
Giuntini, Diletta; Räthel, Jan; Herrmann, Mathias; Michaelis, Alexander; Olevsky, Eugene A. | Journal Article |
| 2015 | Advances in Solid Oxide Fuel Cells X. Preface
Kusnezoff, Mihails; Bansal, Narottam P. | Conference Paper |
| 2015 | Aging behavior of reactive air brazed seals for SOFC
Pönicke, Andreas; Schilm, Jochen; Kusnezoff, Mihails; Michaelis, Alexander | Journal Article, Conference Paper |
| 2015 | Analyse und quantitative Beschreibung des Matrizenfüllprozesses beim Trockenpressen. Schlussbericht
Fries, M.; Glöß, B.; Kraft, T.; Breinlinger, T. | Report |
| 2015 | Analysis of the counter-electrode potential in a 3-electrode lithium ion battery cell
Heubner, Christian; Langklotz, Ulrike; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2015 | Anodic dissolution of cobalt in aqueous sodium nitrate solution at high current densities
Schneider, Michael; Schubert, Nora; Höhn, Sören; Michaelis, Alexander | Journal Article |
| 2015 | Anordnung und Verfahren zur Durchführung einer intensivierten Verbrennung
Kriegel, Ralf; Kircheisen, Robert; Lampinen, Markku; Ristimäki, Ville | Patent |
| 2015 | Anordnung zur tomografischen Erfassung von plattenförmigen Objekten
Fischer, Björn; Krüger, Peter; Reinert, Sven | Patent |
| 2015 | Anordnung zur zerstörungsfreien Werkstoffprüfung
Köhler, Bernd; Schubert, Frank; Lieske, Uwe | Patent |
| 2015 | Anwendungen der Röntgenmikroskopie in der Mikroelektronik und Energietechnik
Zschech, Ehrenfried; Gluch, Jürgen; Niese, Sven; Lewandowska, Anna; Wolf, Jürgen M.; Röntzsch, Lars; Löffler, Markus | Conference Paper |
| 2015 | Application-oriented design and field trial of the LPG-powered eneramic® power generator
Reuber, Sebastian; Megel, Stefan; Jürgens, Christian; Pfeifer, Thomas; Bednarz, Marc; Wunderlich, Christian; Michaelis, Alexander | Conference Paper |
| 2015 | Aufbau und Biofunktionalisierung einer LSPR-Molekülsensorikeinheit
Steinke, Nadja; Wuchrer, Roland; Härtling, Thomas | Conference Paper |
| 2015 | AUTARTEC® - Technologien zur autarken Wasserver- und Entsorgung
Saft, Franziska; Lincke, Marc; Schulze, Erik; Faßauer, Burkhardt; Michaelis, Alexander | Poster |
| 2015 | Basaltfaserkomposite mit polymer-keramischer Matrix - Entwicklung, Herstellung und Charakterisierung hinsichtlich mechanischer und korrosiver Beanspruchbarkeit
Gößel, Martin
: Schönfeld, Katrin (Betreuer); Feller, Jörg (Betreuer) | Bachelor Thesis |
| 2015 | Basic study on the influence of glass composition and Aluminum content on the Ag/Al paste contact formation to boron emitters
Körner, Stefan; Kiefer, Fabian; Peibst, Robby; Heinemeyer, F.; Krügener, J.; Eberstein, Markus | Journal Article, Conference Paper |
| 2015 | Bauteil hergestellt aus keramischem Werkstoff und Verfahren zu seiner Herstellung
Herrmann, Mathias; Matthey, Björn; Schilm, Jochen | Patent |
| 2015 | Beitrag zur Aufklärung molekularer Wechselwirkungen von organischen Additiven in technischen Korund-Suspensionen
Rödel, Conny
: Michaelis, Alexander | Dissertation |
| 2015 | Beiträge zur Charakterisierung des Prozessablaufes und der Verbindungsbildung beim Mikroschweißen für Hochtemperaturwerkstoffe
Kronsbein, Antje | Thesis |
| 2015 | Besonderheiten bei der Maßstabsübertragung von Rührprozessen von hochkonzentrierten faserigen Suspensionen
Lomtscher, Annett; Jobst, Karin; Deutschmann, Anne; Rostalski, Kay; Kraume, Matthias | Conference Paper |
| 2015 | Biegeelementanordnung sowie deren Verwendung
Bramlage, Bernhard; Ernst, Dörthe; Gebhardt, Sylvia | Patent |
| 2015 | Bonefoam network and innovative shaping approach to next-generation bio scaffolds
Ahlhelm, Matthias; Günther, Paul; Scheithauer, Uwe; Schwarzer, Eric; Moritz, Tassilo | Presentation |
| 2015 | Bulk titanium nitride ceramics - Significant enhancement of hardness by silicon nitride addition, nanostructuring and high pressure sintering
Bläß, Ulrich W.; Barsukova, Tatiana; Schwarz, Marcus; Köhler, Anke; Schimpf, Christian; Petrusha, Igor A.; Mühle, Uwe; Rafaja, David; Kroke, Edwin | Journal Article |
| 2015 | Carbide und Oxide als Verschleißschutz - von der Synthese zur thermisch gespritzten Schicht
Berger, Lutz-Michael | Habilitation |
| 2015 | Carbon nanotubes and carbon nanofibers fabricated on tubular porous Al2O3 substrates
Simon, Adrian; Seyring, M.; Kämnitz, Susanne; Richter, Hannes; Voigt, Ingolf; Rettenmayr, M.; Ritter, U. | Journal Article |
| 2015 | CerMeTex - innovative porous and dense metal fiber-ceramic composites for improved and multi-functional component properties on the basis of metal fiber and metal filament structures
Herfert, Heike; Moritz, Tassilo; Günther, Anne; Hofmann, Marcel | Conference Paper |
| 2015 | CerMeTex - Metall und Keramik wachsen zusammen
Hofmann, Marcel; Herfert, Heike; Günther, Anne; Moritz, Tassilo | Journal Article |
| 2015 | CFY-stack technology: The next design
Bienert, Christian; Brandner, Marco; Skrabs, S.; Venskutonis, Andreas; Sigl, L.S.; Megel, Stefan; Beckert, Wieland; Trofimenko, Nikolai; Kusnezoff, Mihails; Michaelis, Alexander | Conference Paper, Journal Article |
| 2015 | Characteristics of a continuous direct foaming technique
Luthardt, Fabian; Adler, Jörg; Michaelis, Alexander | Journal Article |
| 2015 | Charakterisierung von Borcarbid als Material für Hochtemperatursensoren
Feng, Bing; Martin, Hans-Peter | Journal Article |
| 2015 | Charakterisierung von co-gesinterten Metall-Keramik Verbundfolien
Heilmann, Stefan | Thesis |
| 2015 | Comment on "High-pressure spark plasma sintering (SPS) of transparent polycrystalline magnesium aluminate spinel (PMAS)" by M. Sokol, S. Kalabukhov, M. P. Dariel, N. Frage [J. Eur. Ceram. Soc. 34 (2014) 4305]
Krell, Andreas | Journal Article |
| 2015 | Comment: The effect of grain size on the mechanical and optical properties of spark plasma sintering-processed magnesium aluminate spinel MgAl2O4 (Rothaman et al.)
Krell, Andreas | Journal Article |
| 2015 | Comparison of the high-temperature corrosion of aluminium nitride, alumina, magnesia and zirconia ceramics by coal ashes
Himpel, Gert; Herrmann, Mathias; Höhn, Sören | Journal Article |
| 2015 | Cost-reduced and environmentally friendly manufacturing of Lithium ion batteries
Wolter, Mareike; Börner, Stefan; Leiva Pinzon, Diana Marcela; Nikolowski, Kristian | Conference Paper |
| 2015 | Crack detection of ceramics based on the method of laser speckle photometry
Chen, Lili
: Dobmann, Gerd (1. Gutachter); Boller, Christian (2. Gutachter); Cikalova, Ulana (Betreuer) | Master Thesis |
| 2015 | Cross-sectional technologies
Voigtsberger, Bärbel; Rossner, Wolfgang; Lenk, Reinhard; Kinski, Isabel; Scheffler, Michael; Kollenberg, Wolfgang; Guillon, Olivier; Danzer, Robert; Wampers, Holger; Zschech, Ehrenfried | Journal Article |
| 2015 | Demands, potentials and economic aspects of thermal spraying with aqueous solutions
Toma, Filofteia-Laura; Potthoff, Annegret; Leyens, Christoph | Presentation |
| 2015 | Demands, potentials, and economic aspects of thermal spraying with suspensions: A critical review
Toma, Filofteia-Laura; Potthoff, Annegret; Berger, Lutz-Michael; Leyens, Christoph | Journal Article |
| 2015 | Determination of state of charge-dependent asymmetric Butler-Volmer kinetics for LixCoO2 electrode using GITT measurements
Hess, Andreas; Roode-Gutzmer, Quirina; Heubner, Christian; Schneider, Michael; Michaelis, Alexander; Bobeth, Manfred; Cuniberti, Gianaurelio | Journal Article |
| 2015 | Development of electrolyte supported cells based on a thin 3YSZ substrate
Trofimenko, Nikolai; Kusnezoff, Mihails; Klemm, D.; Schimanke, Danilo | Conference Paper, Journal Article |
| 2015 | Direct electrocaloric measurements using a differential scanning calorimeter
Sanlialp, Mehmet; Shvartsman, Vladimir V.; Lupascu, Doru Constantin; Molin, Christian; Gebhardt, Sylvia | Conference Paper |
| 2015 | Eddy current imaging for electrical characterization of silicon solar cells and TCO layers
Hwang, Byungguk; Hillmann, Susanne; Schulze, Martin; Klein, Marcus; Heuer, Henning | Conference Paper |
| 2015 | Effect of cubic boron nitride grain size in the reinforcing of α-Sialon ceramics sintered via SPS
Garrett, Jethro C.; Sigalas, Iakovos; Wolfrum, Anne-Kathrin; Herrmann, Mathias | Journal Article |
| 2015 | Effect of dopants on the electrocaloric effect of 0.92 Pb(Mg1/3Nb2/3)O3–0.08 PbTiO3 ceramics
Molin, Christian; Sanlialp, M.; Shvartsman, Vladimir; Lupascu, Doru Constantin; Neumeister, Peter; Schönecker, Andreas; Gebhardt, Sylvia | Journal Article |
| 2015 | Effect of feedstock characteristics and operating parameters on the properties of Cr2O3 coatings prepared by suspension-HVOF spray
Toma, Filofteia-Laura; Scheitz, Stefan; Trache, Richard; Langner, Stefan; Leyens, Christoph; Potthoff, Annegret; Oelschlägel, Kathrin | Conference Paper |
| 2015 | Effect of oenothera odorata root extract on microgravity and disuse-induced muscle atrophy
Lee, Yong-Hyeon; Seo, Dong-Hyun; Park, Ji Hyung; Kabayama, Kazuya; Opitz, Jörg; Lee, Kwangho; Kim, Han Sung; Kim, Tack-Joong | Journal Article |
| 2015 | Effects of powder characteristics and high velocity flame spray processes on Cr3C2-NiCr-coatings
Trache, Richard; Toma, Filofteia-Laura; Leyens, Christoph; Berger, Lutz-Michael; Thiele, Sven; Michaelis, Alexander | Conference Paper |
| 2015 | Effiziente Einbindung räumlich verteilter Modelle in Multiphysik-Netzwerke
Ziske, Johannes; Neubert, Holger | Conference Paper |
| 2015 | Die Eignung von keramischen Pulvern und keramischen Formstoffkombinationen beim Stahlgießen von Gussprodukten
Gerner, Norman
: Tonn, Babette (Prüfer); Palkowski, Heinz (Prüfer); Martin, Hans-Peter (Betreuer); Schönfeld, Katrin (Betreuer) | Master Thesis |
| 2015 | Einfluss des Energieeintrages bei der Suspensionsherstellung auf die Stabilität hochkonzentrierter Aluminiumoxid-Schlicker
Meyer, Anja; Rödel, Conny | Book Article |
| 2015 | Electrical characterization of thick film materials
Rebenklau, Lars; Gierth, Paul; Grießmann, Horst | Conference Paper |
| 2015 | Electrochemical corrosion of silicon-infiltrated silicon carbide ceramics in aqueous solutions
Herrmann, Mathias; Sempf, Kerstin; Kremmer, Kerstin; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2015 | Electrochemical MEA characterization
Kusnezoff, Mihails; Beckert, Wieland; Trofimenko, Nikolai; Jacobs, B.; Dosch, Christian; Megel, Stefan; Rachau, M.; Wieprecht, C.; Gipp, D. | Conference Paper |
| 2015 | Elektrokalorische Anordnung
Neumeister, Peter | Patent |
| 2015 | Entwicklung einer extrudierfähigen kaltplastischen Masse auf Basis von Aluminiumoxid
Tscharntke, Franziska | Thesis |
| 2015 | Entwicklung eines Siliziumnitrid-Werkstoffes für Rotoren in Mikrogasturbinen
Kunz, Willy | Journal Article |
| 2015 | Entwicklung porositätsgradierter Strukturen auf Basis von Zirkoniumdioxid über die Kombination von Additiver Fertigung und Gefrier-Direktschäumung
Günther, Paul
: Liersch, Antje (1. Gutachter); Klein, Gernot (2. Gutachter); Moritz, Tassilo (Betreuer) | Master Thesis |
| 2015 | Entwicklung und Evaluierung von Metallisierungen mit partikelfreien/-haltigen Tinten mit Inkjet- und Aerosol-Druck
Hildebrandt, Stefanie
: Michaelis, Alexander | Dissertation |
| 2015 | Entwicklung und Modellierung eines Verfahrenskonzepts zur Kopplung von Biogaserzeugung und Fischer-Tropsch-Synthese für die Herstellung chemischer Produkte
Presser, André | Thesis |
| 2015 | Entwicklung von reproduzierbaren Modellsystemen unterschiedlich belasteter Grauwässer für die labortechnische Bewertung von AOP-Prozessen
Gyenes, Adrian
: Kühn, Volker (Betreuer); Schalk, Thomas (Betreuer); Lincke, Marc (Betreuer); Krebs, Peter (Verantw. Hochschullehrer) | Master Thesis |
| 2015 | Entwicklung von Sodalithmembranen für die Gastrennung unter industriellen Bedingungen
Günther, Christiane
: Michaelis, Alexander | Dissertation |
| 2015 | Entwicklung wirtschaftlich effizienter Hartmetallbeschichtungslösungen für Hochtemperaturanwendungen. Teil 1: Beschichtungspulver, Wirtschaftlichkeit und Schichteigenschaften
Berger, Lutz-Michael; Trache, Richard; Toma, Filofteia-Laura; Thiele, Sven; Norpoth, Jonas; Janka, Leo | Journal Article |
| 2015 | Erratum to “A simple phenomenological model for magnetic shape memory actuators”
Ziske, Johannes; Ehle, Fabian; Neubert, Holger; Price, Aaron D.; Lienig, Jens | Journal Article |
| 2015 | Estimating blood sugar from voice samples - A preliminary study
Tschöpe, Constanze; Duckhorn, Frank; Wolff, Matthias; Saeltzer, Gerhard | Conference Paper |
| 2015 | Ethanol steam reforming over bimetallic coated ceramic foams: Effect of reactor configuration and catalytic support
Palma, Vincenzo; Ruocco, Concetta; Castaldo, Filomena; Ricca, Antonio; Böttge, Daniela | Journal Article |
| 2015 | EU-Network BONEFOAM and recent activities in manufacturing ceramics and metal-ceramic composites for biomedical applications
Ahlhelm, Matthias; Günther, Paul; Scheithauer, Uwe; Schwarzer, Eric; Günther, A.; Slawik, T.; Moritz, Tassilo; Michaelis, Alexander | Presentation |
| 2015 | Evaluation of alumina as protective coating for carbon fibers in magnesium-based composites
Abidin, Alfaferi Zainal; Wolf, Michel; Krug, Mario; Endler, Ingolf; Knaut, Martin; Höhn, Mandy; Michaelis, Alexander | Conference Paper |
| 2015 | Evaluation of piezo composite based omnidirectional single fibre transducers for 3D USCT
Zapf, Michael; Hohlfeld, Kai; Shah, Gourav; Gebhardt, Sylvia; Dongen, Koen W.A. van; Gemmeke, Hartmut; Michaelis, Alexander; Ruiter, Nicole V. | Conference Paper |
| 2015 | Experimentelle und modellbasierte Untersuchungen zum Einfluss der Granulatstruktur auf die mechanischen Granulateigenschaften
Eckhard, Susanna
: Heinrich, Stefan (Gutachter); Teipel, Ulrich (Gutachter); Fries, Manfred (Gutachter) | Dissertation |
| 2015 | Festkommaportierung des generalisierten Mel-Cepstrum
Becker, Arnulf
: Wolff, Matthias (Betreuender Hochschullehrer); Duckhorn, Frank (Betreuer) | Bachelor Thesis |
| 2015 | A field investigation on transport of carbon-supported nanoscale zero-valent iron (nZVI) in groundwater
Busch, Jan; Meißner, Tobias; Potthoff, Annegret; Bleyl, Steffen; Georgi, Anett; Mackenzie, Katrin; Trabitzsch, Ralf; Werban, Ulrike; Oswald, Sascha | Journal Article |
| 2015 | Formation of carbide segregations in nanoscaled hardmetals
Pötschke, Johannes; Mayer, Markus; Richter, Volkmar | Poster |
| 2015 | Fortschritte in der Metallographie
: Schneider, Gerhard (Hrsg.); Zschech, Ehrenfried (Hrsg.); Petzow, Günter (Hrsg.) | Conference Proceedings |
| 2015 | Fraunhofer Institute for Ceramic Technologies and Systems. Annual Report 2014/2015
| Annual Report |
| 2015 | Fraunhofer-Institut für Keramische Technologien und Systeme. Jahresbericht 2014/2015
| Annual Report |
| 2015 | Friction and wear of TiN-Si3N4 nanocomposites against ShKh15 steel
Kolesnichenko, V.G.; Zgalat-Lozynskii, Ostap; Varchenko, V.T.; Herrmann, Mathias; Ragulya, Andrey | Journal Article |
| 2015 | From high-performance to super-high-performance materials in a composite
Herfert, Heike; Hofmann, Marcel; Günther, Anne | Journal Article |
| 2015 | Fundamentals of sintering nanoscaled binderless hardmetals
Pötschke, Johannes; Richter, Volkmar; Michaelis, Alexander | Journal Article, Conference Paper |
| 2015 | Future potential of high-performance ceramics
Voigtsberger, Bärbel; Rossner, Wolfgang; Joachim, Klemens; Lenk, Reinhard; Hartmann, Martin | Journal Article |
| 2015 | Glass phase alignment in front side pastes for P- and N-type solar cells
Eberstein, Markus; Reinhardt, Kathrin; Körner, Stefan; Kiefer, Fabian; Peibst, Robby | Conference Paper |
| 2015 | Gleichzeitige Vermessung der lateralen und vertikalen Linsenausdehnung sowie Charakterisierung von Punktschweißverbindungen mittels Ultraschallmikroskopie
Hipp, Raffael; Gommlich, Andreas; Schubert, Frank | Conference Paper |
| 2015 | Hartmetallschichten auf der Basis von TiC - eine Alternative zum Stand der Technik?
Berger, Lutz-Michael | Journal Article |
| 2015 | High performance front side pastes by Ag precursor equipped glasses
Eberstein, Markus; Körner, Stefan | Conference Paper |
| 2015 | High performance PZT thick film actuators using in plane polarisation
Ernst, Dörthe; Bramlage, Bernhard; Gebhardt, Sylvia; Schönecker, Andreas | Journal Article |
| 2015 | High-frequency eddy current based impedance spectroscopy for characterization of the percolation process of wet conductive coatings
Patsora, Iryna; Hillmann, Susanne; Heuer, Henning; Foos, Bryan C.; Calzada, Juan G. | Conference Paper |
| 2015 | High-performance ceramics for mobility, electrical engineering/optics and life sciences
Voigtsberger, Bärbel; Rossner, Wolfgang; Lenk, Reinhard; Lindemann, Gert; Koch, Thomas; Alkemade, Ulrich; Schweinzger, Manfred; Höge, Michael; Fischer, Horst; Kelnberger, Alfons; Oberbach, Thomas | Journal Article |
| 2015 | High-performance ceramics for power, chemical, machine and plant engineering
Voigtsberger, Bärbel; Rossner, W.; Stelter, Michael; Topfer, J.; Eichler, J.; Voigt, Ingolf; Voss, H. | Journal Article |
| 2015 | High-temperature stability of microstructure defects in graphitic boron nitride subjected to the field assisted sintering
Schimpf, Christian; Schumann, H.; Räthel, Jan; Herrmann, Mathias; Rafaja, David | Journal Article |
| 2015 | HiTEG (Mat + AVT) - Hochtemperaturgeneratoren für die Abwärmenutzung in Fahrzeugen und Industriebrenneranlagen. Abschlussbericht
Martin, Hans-Peter; Kinski, Isabel; Schilm, Jochen; Wätzig, Katja; Pönicke, Andreas; Conze, Susan; Rost, Axel | Report |
| 2015 | Hochleistungskeramiken für Energie, Chemie sowie Maschinen- und Anlagenbau
Voigtsberger, Bärbel; Rossner, Wolfgang; Stelter, Michael; Töpfer, Jörg; Eichler, Jens; Voigt, Ingolf; Voss, Hartwig | Journal Article |
| 2015 | Impact of trace elements and impurities in technical zero-valent iron brands on reductive dechlorination of chlorinated ethenes in groundwater
Birke, Volker; Schuett, Christine; Burmeier, Harald; Friedrich, Hans-Jürgen | Book Article |
| 2015 | In situ time-dependent dielectric breakdown in the transmission electron microscope: A possibility to understand the failure mechanism in microelectronic devices
Liao, Zhongquan; Gall, Martin; Yeap, Kong Boon; Sander, Christoph; Clausner, André; Mühle, Uwe; Gluch, Jürgen; Standke, Gisela; Aubel, Oliver; Beyer, Armand; Hauschildt, Meike; Zschech, Ehrenfried | Journal Article |
| 2015 | In-situ study of the TDDB-induced damage mechanism in Cu/ultra-low-k interconnect structures
Liao, Zhongquan; Gall, Martin; Yeap, Kong Boon; Sander, Christoph; Mühle, Uwe; Gluch, Jürgen; Standke, Yvonne; Aubel, Oliver; Vogel, Norman; Hauschildt, Meike; Beyer, Armand; Engelmann, Hans Jürgen; Zschech, Ehrenfried | Journal Article, Conference Paper |
| 2015 | Industrial inert drying system for high efficiency heterojunction solar cells
Schörner, S.; Clement, C.; Bell, H.; Gierth, Paul; Rebenklau, Lars | Conference Paper |
| 2015 | The influence of different pre-treatments of current collectors and variation of the binders on the performance of Li4Ti5O12 anodes for lithium ion batteries
Wennig, Sebastian; Langklotz, Ulrike; Prinz, Günther M.; Schmidt, A.; Oberschachtsiek, Bernd; Lorke, Axel; Heinzel, Angelika | Journal Article |
| 2015 | Influence of different sintering techniques on microstructure and phase composition of oxygen-transporting ceramic
Ravkina, Olga; Räthel, Jan; Feldhoff, Armin | Journal Article |
| 2015 | Influence of electrochemical potentials on the tribological behavior of silicon carbide and diamond-coated silicon carbide
Amann, Tobias; Kailer, Andreas; Herrmann, Mathias | Journal Article |
| 2015 | Ink jet printable silver metallization with zinc oxide for front side metallization for micro crystalline silicon solar cells
Jurk, Robert; Fritsch, Marco; Eberstein, Markus; Schilm, Jochen; Uhlig, Florian; Waltinger, Andreas; Michaelis, Alexander | Journal Article |
| 2015 | Innovative keramische Werkstoff- und Verfahrenskonzepte zur Erschließung neuer anspruchsvoller Applikationen in Optik und Elektronik
Reichel, Uwe; Schubert, Ralf | Journal Article |
| 2015 | Innovative shaping approach for manufacturing personalized bone replacement materials
Ahlhelm, Matthias; Günther, Paul; Schwarzer, Eric; Scheithauer, Uwe; Moritz, Tassilo | Presentation |
| 2015 | Integration of CaCu3Ti4O12 capacitors into LTCC multilayer modules
Löhnert, Romy; Capraro, Beate; Barth, Stefan; Bartsch, Heike; Müller, Jens; Töpfer, Jörg | Journal Article |
| 2015 | Interaction of perovskite type lanthanum-calcium-chromites-titanates La1-xCaxCr1-yTiyO3-δ with solid electrolyte materials
Belda, Charif; Dietzen, Egle; Kusnezoff, Mihails; Trofimenko, Nikolai; Vashook, Uladimir; Michaelis, Alexander; Guth, Ulrich | Conference Paper |
| 2015 | Interface phenomena of co-sintered steel-zirconia laminates
Bergner, Anne; Moritz, Tassilo; Michaelis, Alexander | Conference Paper |
| 2015 | Investigation of charge transfer kinetics of Li-Intercalation in LiFePO4
Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2015 | Investigation of Eddy Current examination on OD fatigue crack for steam generator tubes
Kong, Yuying; Ding, Boyuan; Li, Ming; Liu, Jinhong; Chen, Huaidong; Meyendorf, Norbert G. | Conference Paper |
| 2015 | Investigation of inhomogeneous shrinkages of partially crystallizing Low Temperature Co-fired Ceramics (LTCC)
Lenz, Christian; Kappert, Sandro; Ziesche, Steffen; Neubert, Holger; Partsch, Uwe | Conference Paper |
| 2015 | Investigation of thermal shock behaviour of refractory ceramics based on the calcium-aluminate
Zhang, W.; Doynov, N.; Ossenbrink, R.; Michailov, V.; Scheithauer, U.; Michaelis, A. | Abstract |
| 2015 | Investigations of PMN-PT composites for high sensitive ultrasonic phased array probes in NDE
Walter, Susan; Herzog, Thomas; Schubert, Frank; Heuer, Henning; Han, Tae-Young; Lee, Sang-Goo; Chae, Hee Man; Joh, Cheeyoung; Seo, Hee-Seon | Conference Paper |
| 2015 | Katalysierte Filter für Einzelraumfeuerstätten
Petasch, Uwe; Adler, Jörg; Striegler, Uwe | Conference Paper |
| 2015 | Keramik für Filtrationsanwendungen
Adler, Jörg; Kriegel, Ralf; Petasch, Uwe; Richter, Hannes; Voigt, Ingolf; Weyd, M. | Conference Paper |
| 2015 | Kinetics in the stabilization of polyacrylonitrile
Meinl, Juliane; Gestrich, Tim; Kirsten, Martin; Cherif, Chokri; Michaelis, Alexander | Conference Paper |
| 2015 | Kombiniertes Katalysator- und Sauerstoffträgersystem zur Aufbereitung teerhaltiger Brenngase aus der Biomassevergasung via partieller Oxidation
Böhning, Dorith; Beckmann, Michael; Kriegel, Ralf; Richter, Jörg; Ma, Mingshui; Müller, Michael M. | Journal Article |
| 2015 | Konversionselement für ein optisches oder optoelektronisches Bauelement und Verfahren zu seiner Herstellung
Wätzig, Katja; Kinski, Isabel | Patent |
| 2015 | Lab-based in-situ X-ray microscopy - methodical developments and applications in materials science and microelectronics
Niese, Sven
: Schmeißer, Dieter (Gutachter); Zschech, Ehrenfried (Gutachter); Schneider, Gerd (Gutachter) | Dissertation |
| 2015 | Labortechnische Untersuchungen zu Möglichkeiten der bedarfsgerechten Biogaserzeugung durch zielgerichtete Verfahrensführung
Kidszun, Claudyn | Thesis |
| 2015 | Large-scale ceramic support fabrication for palladium membranes
Richter, Hannes | Book Article |
| 2015 | Lateral damage in graphene carved by high energy focused gallium ion beams
Liao, Zhongquan; Zhang, Tao; Gall, Martin; Dianat, Arezoo; Rosenkranz, Rüdiger; Jordan, Rainer; Cuniberti, Gianaurelio; Zschech, Ehrenfried | Journal Article |
| 2015 | Light-field-characterization in a continuous hydrogen-producing photobioreactor by optical simulation and computational fluid dynamics
Krujatz, Felix; Illing, Rico; Krautwer, Tobias; Liao, Jing; Helbig, Karsten; Goy, Katharina; Opitz, Jörg; Cuniberti, Gianaurelio; Bley, Thomas; Weber, Jost | Journal Article |
| 2015 | Local heat generation in a single stack lithium ion battery cell
Heubner, Christian; Schneider, Michael; Lämmel, C.; Michaelis, Alexander | Journal Article |
| 2015 | Magnéli phases Ti4O7 and Ti8O15 and their carbon nanocomposites via the thermal decomposition-precursor route
Conze, Susan; Veremchuk, Igor; Reibold, Marianne; Matthey, Björn; Michaelis, Alexander; Grin, Juri; Kinski, Isabel | Journal Article |
| 2015 | Material requirements for power and high temperature multilayer ceramic capacitors (MLCC)
Engel, G.F. | Conference Paper |
| 2015 | Measuring and imaging permittivity of insulators using high-frequency eddy-current devices
Gäbler, Simone; Heuer, Henning; Heinrich, Gert | Journal Article |
| 2015 | Membrantrennverfahren und Membrananlage zur energieeffizienten Erzeugung von Sauerstoff
Kriegel, Ralf | Patent |
| 2015 | Messung der Lumineszenzantwort an Einzelpartikeln von Aufkonversionsmaterialien
Gaska, Florian
: Schuster, Christiane (Betreuer); Jugelt, Peter (Betreuer) | Bachelor Thesis |
| 2015 | Micro powder injection moulding: Processes, materials and applications
Piotter, Volker; Moritz, Tassilo | Journal Article |
| 2015 | Micro-positioning stages for adaptive optics based on piezoelectric thick film actuators
Gebhardt, Sylvia; Ernst, Dörthe; Bramlage, Bernhardt | Conference Paper |
| 2015 | Micro-positioning stages for adaptive optics based on piezoelectric thick film actuators
Gebhardt, Sylvia; Ernst, Dörthe; Bramlage, Bernhardt; Pabst, Oliver; Oberdörster, Alexander | Journal Article |
| 2015 | Microstructure and electric properties of CaCu3Ti4O12 multilayer capacitors
Löhnert, Romy; Bartsch, Heike; Schmidt, Rainer; Capraro, Beate; Töpfer, Jörg | Journal Article |
| 2015 | Modellgestützte Konzeption und Aufbau eines Demonstrators für neuartige keramische fluidische Mischerstrukturen durch Folientechnologie
Körnig, André
: Lange, Rüdiger (Betreuender Hochschullehrer); Bauer, Tobias (Betreuer); Beckert, Wieland (Betreuer); Scheithauer, Uwe (Betreuer) | Thesis |
| 2015 | Modellierungsansätze und neue Brennhilfsmittelkonzepte für die LTCC-Drucksintertechnologie
Brandt, Björn
: Michaelis, Alexander (Gutachter); Rabe, Torsten (Betreuer); Roosen, Andreas (Gutachter) | Dissertation |
| 2015 | Möglichkeiten zur Effizienzsteigerung im Revisions- und Störfall-Management im Kraftwerk
Hillmann, Susanne; Bor, Zsolt; Schiller-Bechert, David-Maximilian; Uhlemann, Frank | Conference Paper |
| 2015 | Multi-fuelled solar steam reforming for pure hydrogen production using solar salts as heat transfer fluid
Giaconia, Alberto; Monteleone, G.; Morico, B.; Salladini, A.; Shabtai, K.; Sheintuch, M.; Böttge, Daniela; Adler, Jörg; Palma, V.; Voutetakis, S.; Lemonidou, A.; Annesini, M.C.; Exter, M. den; Balzer, H.; Turchetti, L. | Journal Article, Conference Paper |
| 2015 | Multi-scale material modelling of glass-ceramics
Greiner, Anna; Neumeister, Peter | Presentation |
| 2015 | Nanoskalige Werkzeugwerkstoffe für Fertigungsaufgaben im Maschinenbau
Pötschke, Johannes | Abstract |
| 2015 | Nanostructured WC-Co hardmetal as reference material for high hardness range
Aleksandrov Fabijanić, Tamara; Alar, Željko; Pötschke, Johannes | Conference Paper |
| 2015 | New lightweight kiln furniture made by combination of ceramic green tapes and extrudates
Scheithauer, Uwe; Schwarzer, Eric; Tscharntke, Franziska; Schmidt, Tobias; Jegust, Stephan; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander | Journal Article |
| 2015 | New piezo material and its applications for energy harvesting and ultrasound probe
Lee, S.-G.; Lee, J.-H.; Lee, K.-J.; Chae, H.M.; Joh, C.Y.; Seo, H.S.; Heuer, H.; Herzog, T. | Conference Paper |
| 2015 | Non-contact printing: Conductive track geometry affected by ink rheology and composition
Hildebrandt, Stefanie; Kinski, Isabel; Mosch, Sindy; Waltinger, Andreas; Uhlig, Florian; Michaelis, Alexander | Journal Article |
| 2015 | Novel ceramic foam-scaffolds for personalized bone replacement
Ahlhelm, Matthias; Günther, Paul; Schwarzer, Eric; Scheithauer, Uwe; Lausch, H.; Moritz, Tassilo | Presentation |
| 2015 | Novel foam structures for personalized bone replacement materials
Ahlhelm, Matthias; Günther, P.; Scheithauer, Uwe; Schwarzer, E.; Gorjup, Erwin; Briesen, Hagen von; Moritz, Tassilo; Michaelis, Alexander | Presentation |
| 2015 | Novel functional structures and structural combinations by additive manufacturing
Moritz, Tassilo; Scheithauer, Uwe; Schwarzer, Eric; Ahlhelm, Matthias; Günther, Paul; Richter, Hans-Jürgen | Journal Article |
| 2015 | Novel thermoelectric temperature sensors
Rebenklau, Lars; Irrgang, Klaus; Wodke, Axel; Augsburg, K.; Bechtold, Franz; Gierth, Paul; Grießmann, Horst; Lippmann, Lutz; Niedermeyer, Lars | Conference Paper |
| 2015 | Online and non-invasive investigation of bubble columns with electrical resistance tomography (ERT)
Fogel, Stefan; Deutschmann, Anne; Jobst, Karin; Michaelis, Alexander | Presentation |
| 2015 | Optimization of Spark Plasma Sintering tooling design
Giuntini, Diletta; Olevsky, Eugene Al; Räthel, Jan; Herrmann, Mathias; Michaelis, Alexander | Conference Paper |
| 2015 | Optische Funktionsschichten. Antireflex-Beschichtung auf transparenten Keramiken
Reichel, Uwe; Kinski, Isabel | Journal Article |
| 2015 | The oxidized state of the nanocomposite Carbo-Iron® causes no adverse effects on growth, survival and differential gene expression in zebrafish
Weil, Mirco; Meißner, Tobias; Busch, Wibke; Springer, Armin; Kühnel, Dana; Schulz, Ralf; Duis, Karen | Journal Article |
| 2015 | Performance of an open thermal adsorption storage system with Linde type A zeolites: Beads versus honeycombs
Jänchen, Jochen; Herzog, Thomas H.; Gleichmann, Kristin; Unger, Baldur; Brandt, Alfons; Fischer, Gundula; Richter, Hannes | Journal Article |
| 2015 | Phased array ultrasonic testing of dissimilar metal welds using geometric based referencing delay law technique
Han, Tae-Young; Schubert, Frank; Hillmann, Susanne; Meyendorf, Norbert | Conference Paper |
| 2015 | Phasenbildungsmechanismen in Stahl-Keramik-Werkstoffverbunden
Günther, Anne; Slawik, Tim; Moritz, Tassilo; Mühle, Uwe; Michaelis, Alexander | Conference Paper |
| 2015 | Potential applications of hybrid-heated FAST/SPS technology
Räthel, Jan; Hennicke, Jürgen; Herrmann, Mathias | Journal Article |
| 2015 | Potentials of nanostructured WC-Co hardmetal as reference material for Vickers hardness
Fabijanić, Tamara Aleksandrov; Alar, Željko; Pötschke, Johannes | Journal Article |
| 2015 | Preparation and characterization of CVD-TiN-coated carbon fibers for applications in metal matrix composites
Abidin, Alfaferi Zainal; Kozera, Rafał; Höhn, Mandy; Endler, Ingolf; Knaut, Martin; Boczkowska, Anna; Czulak, Andrzej; Malczyk, Piotr; Sobczak, Natalia; Michaelis, Alexander | Journal Article |
| 2015 | Preparation and characterization of silicon nanowires using SEM/FIB and TEM
Banerjee, Sayanti; Mühle, Uwe; Löffler, Markus; Heinzig, André; Trommer, Jens; Zschech, Ehrenfried | Journal Article, Conference Paper |
| 2015 | Process monitoring for resins, carbon fiber fabrics, preforms and consolidated CFRPs by HF radio wave techniques
Heuer, Henning; Schulze, Martin; Pooch, Matthias; Gäbler, Simone; Kupke, Richard | Conference Paper |
| 2015 | Production of higher alcohols from synthesis gas
Schaller, Max; Reichelt, Erik; Männel, Dorothea; Jahn, Matthias | Conference Paper |
| 2015 | Production process for new lightweight kiln furniture
Scheithauer, U.; Slawik, T.; Schwarzer, E.; Tscharntke, F.; Schmidt, T.; Jegust, S.; Richter, H.-J.; Moritz, T.; Michaelis, A. | Conference Paper |
| 2015 | Prüfstand zur Untersuchung des ferroelektromechanischen Materialverhaltens an piezokeramischen Probekörpern unter Mehrfeldbelastung
Hermsdorf, Manja | Thesis |
| 2015 | Pulse plating of manganese oxide nanoparticles on aligned MWCNT
Schneider, Michael; Weiser, Mathias; Schrötke, Carl; Meißner, Frank; Endler, Ingolf; Michaelis, Alexander | Journal Article |
| 2015 | Pulvermetallurgie: Effiziente Prozesse - besondere Eigenschaften
: Kolaska, Hans (Hrsg.); Danninger, Herbert (Hrsg.); Gestrich, Tim (Hrsg.) | Conference Proceedings |
| 2015 | PZT components derived from polysulphone spinning process
Hohlfeld, Kai; Gebhardt, Sylvia; Schönecker, Andreas; Michaelis, Alexander | Journal Article |
| 2015 | Qualification and quantification of mixing processes of highly concentrated suspensions using electrical resistance tomography
Lomtscher, Annett; Jobst, Karin; Fogel, Stefan; Deutschmann, Anne; Rostalski, Kay; Kraume, Matthias | Conference Paper |
| 2015 | Quantitatively analyzing dielectrical properties of resins and mapping permittivity variations in CFRP with high-frequency eddy current device technology
Gäbler, Simone; Heuer, Henning; Heinrich, Gert; Kupke, Richard | Conference Paper |
| 2015 | Radio frequency microelectromechanical system-platform based on silicon-ceramic composite substrates
Fischer, Michael S.; Gropp, S.; Nowak, Jacek; Capraro, Beate; Sommer, Ralf; Hoffmann, Martin J.F.; Müller, J. | Journal Article |
| 2015 | Reactive and non-reactive preparation of B6O materials by FAST/SPS
Thiele, Maik; Herrmann, Mathias; Müller, C.; Gestrich, Tim; Michaelis, Alexander | Journal Article |
| 2015 | Reaktionstechnische Untersuchungen an Co- und Fe-basierten Katalysatorsystemen für die Fischer-Tropsch-Synthese
Schneider, Annemarie | Thesis |
| 2015 | Reliability study on SMD components on an organic substrate with a thick copper core for power electronics applications
Meier, Karsten; Röllig, Mike; Bock, K. | Conference Paper |
| 2015 | Requirements on glasses for femtosecond-laser bases micro-structuring
Seuthe, Thomas; Grehn, Moritz; Mermillod-Blondin, Alexandre; Bonse, Jörn; Eberstein, Markus | Conference Paper |
| 2015 | Review on quality assurance along the CFRP value chain - non-destructive testing of fabrics, preforms and CFRP by HF radio wave techniques
Heuer, Henning; Schulze, Martin; Pooch, Matthias; Gäbler, Simone; Nocke, Andreas; Bardl, Georg; Cherif, Chokri; Klein, Marcus; Kupke, Richard; Vetter, Richard; Lenz, Florian; Kliem, M.; Bülow, C.; Goyvaerts, J.; Mayer, T.; Petrenz, S. | Journal Article |
| 2015 | Rheological properties of silver filled polymer suspensions and their effects on printing performance
Reinhardt, Kathrin; Eberstein, Markus; Hübner, Nancy; Saphiannikova, Marina | Poster |
| 2015 | Riss- und Schadenssanierung von Betonwerkstein mittels Expansionstechnologie
Hoyer, Thomas | Book Article |
| 2015 | Screen-printed ultrasonic 2-D matrix array transducers for microparticle manipulation
Qiu, Yongqiang; Wang, Han; Gebhardt, Sylvia; Bolhovitins, Aleksandrs; Démoré, Christine; Schönecker, Andreas; Cochran, Sandy | Journal Article |
| 2015 | SEI-component formation on sub 5 nm sized silicon nanoparticles in Li-ion batteries: The role of electrode preparation, FEC addition and binders
Jaumann, Tony; Balach, Juan; Klose, Markus; Oswald, Steffen; Langklotz, Ulrike; Michaelis, Alexander; Eckert, Jürgen; Giebeler, Lars | Journal Article |
| 2015 | A simple phenomenological model for magnetic shape memory actuators
Ziske, Johannes; Ehle, Fabian; Neubert, Holger; Price, Aaron D.; Lienig, Jens | Journal Article |
| 2015 | Sliding wear investigation of suspension sprayed WC-Co nanocomposite coatings
Ahmed, Rehan R.; Ali, O.; Faisal, Nadimul Haque; Al-Anazi, N.M.; Al-Mutairi, Saleh H.; Toma, Filofteia-Laura; Berger, Lutz-Michael; Potthoff, Annegret; Goosen, Mattheus F.A. | Journal Article |
| 2015 | Solder wettability and solder joint reliability of rapid thermal firing thick film pastes
Gierth, Paul; Rebenklau, Lars | Conference Paper |
| 2015 | Spezielle Anwendungen der Transmissionselektronenmikroskopie in der Siliziumhalbleiterindustrie
Mühle, Uwe
: Rafaja, David (Betreuer); Lichte, Hannes (Gutachter); Zschech, Ehrenfried (Gutachter) | Habilitation |
| 2015 | Spurenstoffelimination und Desinfektion in Abwässern mit immobilisiertem TiO2-Photokatalysator
Schulze, Erik; Saft, Franziska; Faßauer, Burkhard; Adler, Jörg; Michaelis, Alexander | Conference Paper |
| 2015 | Spurenstoffelimination und Desinfektion mit immobilisiertem Titanoxid
Schulze, Erik | Presentation |
| 2015 | Spurenstoffelimination und Desinfektion mit immobilisiertem Titanoxid
Schulze, Erik; Saft, Franziska; Faßauer, Burkhardt; Adler, Jörg; Michaelis, Alexander | Poster |
| 2015 | Structure property relationship of suspension thermally sprayed WC-Co nanocomposite coatings
Ahmed, Rehan R.; Faisal, N.H.; Al-Anazi, Nayef; Al-Mutairi, S.; Toma, Filofteia-Laura; Berger, Lutz-Michael; Potthoff, Annegret; Polychroniadis, E.K.; Sall, M.; Chaliampalias, D.; Goosen, Mattheus F.A. | Journal Article |
| 2015 | Strukturelle Änderungen in Silicatgläsern unterschiedlicher Komposition durch Bestrahlung mit Femtosekunden-Laserpulsen
Seuthe, Thomas
: Eberstein, Markus (Betreuer); Michaelis, Alexander (Gutachter); Wondraczek, Lothar (Gutachter) | Dissertation |
| 2015 | Strukturkeramik für elektrische Anwendungen
Zschippang, Eveline; Martin, Hans-Peter; Lankau, Volkmar; Klemm, Hagen; Herrmann, Mathias; Michaelis, Alexander | Book Article |
| 2015 | Study of carbon-fiber-reinforced polymers conductivity's dependence on a mechanical strain
Kharabet, Ievgen; Patsora, Iryna; Heuer, Henning; Joneit, Dieter; Tatarchuk, Dmytro | Conference Paper |
| 2015 | Study of the separation properties of FAU membranes constituted by hierarchically assembled nanozeolites
Mastropietro, Teresa F.; Brunetti, Adele; Zito, Pasquale F.; Poerio, Teresa; Richter, Hannes; Weyd, Marcus; Wöhner, Steffen; Drioli, Enrico; Barbieri, Guiseppe | Journal Article |
| 2015 | Substrate integrated MM-wave antenna utilizing metalized cavity walls
Balcells-Ventura, J.; Leiss, J.; Uhlig, P.; Ihle, M.; Ziesche, S.; Bisognin, A.; Luxey, C. | Conference Paper |
| 2015 | Surface preparation for ceramics functionalization by thermal spraying
Scheitz, Stefan; Toma, Filofteia-Laura; Kuntze, Thomas; Leyens, Christoph; Thiele, Sven | Conference Paper |
| 2015 | Suspensionsgespritzte keramische Schichten: Das Potential einer neuen Spritztechnologie
Toma, Filofteia-Laura; Potthoff, Annegret; Langner, Stefan; Kulissa, Nick; Trache, Richard; Leyens, Christoph | Presentation |
| 2015 | Synthese von Edelmetalltinten für den Inkjetdruck funktioneller Schichten mit dem Anwendungsbeispiel der Frontseitenmetallisierung kristalliner Solarzellen
Jurk, Robert
: Michaelis, Alexander | Dissertation |
| 2015 | Synthesis and characterization of a sulfur containing hydroxy sodalite without sulfur radicals
Günther, Christiane; Richter, Hannes; Voigt, Ingolf; Michaelis, Alexander; Tzscheutschler, Hendrik; Krause-Rehberg, Reinhard; Serra, Jose M. | Journal Article |
| 2015 | System und Verfahren zur zerstörungsfreien Prüfung von Metallschmelzschweißverbindungen an dünnwandigen Rohren
Uhlemann, Frank; Hillmann, Susanne; Schiller-Bechert, David Maximilian; Bor, Zsolt | Patent |
| 2015 | Ein systemtechnischer Ansatz zur ein- und multikriteriellen Optimierung von Energiesystemen am Beispiel der SOFC-Prozesssynthese
Reuber, Sebastian
: Michaelis, Alexander | Dissertation |
| 2015 | TEM study of schottky junctions in reconfigurable silicon nanowire devices
Banerjee, Sayanti; Löffler, Markus; Mühle, Uwe; Berent, Katarzyna; Heinzig, A.; Trommer, J.; Weber, Walter; Zschech, Ehrenfried | Journal Article |
| 2015 | Temperature sensors based on thermoelectric effect
Rebenklau, Lars; Gierth, Paul; Paproth, Angelika; Wodtke, Axel; Niedermeier, Lars; Augsburg, Klaus; Bechtold, Franz; Irrgang, Klaus; Lippmann, Lutz | Conference Paper |
| 2015 | Thermoelektrische Werkstoffe und Generatoren - aktueller Entwicklungsstand und zukünftige Potenziale für die Abwärmenutzung
Weißgärber, Thomas; Pacheco, Vincente; Recknagel, Carmen; Pöhle, Georg; Martin, Hans-Peter; Schilm, Jochen; Pönicke, Andreas; Feng, Bing; Kieback, Bernd; Michaelis, Alexander | Conference Paper |
| 2015 | Thermoplastic 3D printing - An additive manufacturing method for producing dense ceramics
Scheithauer, Uwe; Schwarzer, Eric; Richter, Hans-Jürgen; Moritz, Tassilo | Journal Article |
| 2015 | TiOx based thermoelectric modules - manufacturing, properties and operational behavior
Schilm, Jochen; Pönicke, Andreas; Kluge, Martin; Sichert, Ina; Martin, Hans-Peter; Michaelis, Alexander | Journal Article, Conference Paper |
| 2015 | Towards sensible toxicity testing for nanomaterials: Proposal for the specification of test design
Potthoff, Annegret; Weil, Mirco; Meißner, Tobias; Kühnel, Dana | Journal Article |
| 2015 | Towards the deployment of acousto-ultrasonics-based SHM in industry
Schubert, Lars; Bach, Martin; Berger, Ulrich; Buethe, Inka; Fritzen, Claus-Peter; Jung, Henning; Lieske, Uwe; Raddatz, Florian | Conference Paper |
| 2015 | Transparente Spinellkeramiken und Verfahren zu ihrer Herstellung
Hutzler, Thomas; Krell, Andreas | Patent |
| 2015 | Tribology of HVOF- and HVAF-sprayed WC-10Co4Cr hardmetal coatings: A comparative assessment
Bolelli, Giovanni; Berger, Lutz-Michael; Börner, Tim; Koivuluoto, Heli; Lusvarghi, Luca; Lyphout, Christophe; Markocsan, Nicolaie; Matikainen, V.; Nylén, Per E.; Sassatelli, Paolo; Trache, Richard; Vuoristo, Petri | Journal Article |
| 2015 | Tribology of thermally sprayed coatings in the Al2O3-Cr2O3-TiO2 system
Berger, Lutz-Michael | Book Article |
| 2015 | Ultra-thin ZrO2/SrO/ZrO2 insulating stacks for future dynamic random access memory capacitor applications
Knebel, Steve; Pešić, Milan; Cho, Kyuho; Chang, Jaewan; Lim, Hanjin; Kolomiiets, Nadiia; Afanasyev, Valeri; Mühle, Uwe; Schröder, Uwe; Mikolajick, Thomas | Journal Article |
| 2015 | Untersuchung technischer Einflussgrößen auf die elektrische Leitfähigkeit von festphasen-gesintertem Siliciumcarbid
Lankau, Volkmar
: Michaelis, Alexander (Gutachter); Martin, Hans-Peter (Betreuer); Lippmann, Wolfgang (Zweitgutachter) | Dissertation |
| 2015 | Untersuchung zur Rolle von B2O3, Kohlenstoff und SiO2 auf die Verdichtung und Eigenschaften flüssigphasen-gesinterter B6O-Werkstoffe
Müller, Christin | Thesis |
| 2015 | Untersuchung zur zerstörungsfreien Detektion von Rissen an Rohrstrukturen mit geführten Wellen
Harms, Stefan
: Buske, Stefan (Betreuer); Weihnacht, Bianca (Betreuer) | Master Thesis |
| 2015 | Untersuchungen zum Hochtemperaturverhalten von Siliciumcarbid-Schaumkeramik für Brenneranwendungen
Füssel, Alexander | Dissertation |
| 2015 | Usage of the concept of the effectively shaped indenter for the determination of yield stress from Berkovich nano-indentation experiments
Clausner, André; Richter, Frank | Journal Article |
| 2015 | Verfahren und Anordnung zum Erfassen von optischen Brechzahlen oder deren Änderungen
Derenko, Susan; Härtling, Thomas | Patent |
| 2015 | Verfahren und Vorrichtung zur Detektion von Fremdkörpern oder anderen Streuzentren in optisch transparenten Behältern
Röder, Olaf; Fischer, Björn; Wolf, Christian | Patent |
| 2015 | Verfahren und Vorrichtung zur Verhaltenssteuerung von Systemen
Wolff, Matthias; Römer, Ronald; Tschöpe, Constanze; Hentschel, Dieter | Patent |
| 2015 | Verfahren zur Erstellung von Elementverteilungsbildern mit einem Transmissionselektronenmikroskop
Mühle, Uwe; Gluch, Jürgen; Zschech, Ehrenfried | Patent |
| 2015 | Verfahren zur Herstellung keramischer und/oder metallischer Bauteile
Scheithauer, Uwe; Schwarzer, Eric; Poitzsch, Claudia; Richter, Hans-Jürgen; Moritz, Tassilo | Patent |
| 2015 | Verfahren zur Verpackungsherstellungskontrolle und Verpackungsherstellungsmaschine
Härtling, Thomas; Röder, Olaf; Reitzig, Manuela | Patent |
| 2015 | Via hole conditioning in silicon heterojunction metal wrap through solar cells
Dirnstorfer, Ingo; Schilling, Niels; Körner, Stefan; Gierth, Paul; Waltinger, Andreas; Leszczynska, Barbara; Simon, Daniel K.; Gärtner, Jan; Jordan, Paul M.; Mikolajick, Thomas; Dani, Ines; Eberstein, Markus; Rebenklau, Lars; Krause, Jens | Journal Article, Conference Paper |
| 2015 | A viscoplastic-fatigue-creep damage model for tin-based solder alloy
Metais, Benjamin; Kabakchiev, Alexander; Maniar, Youssef; Guyenot, Michael; Metasch, René; Röllig, Mike; Rettenmeier, Philipp; Buhl, Patrick; Weihe, Stefan | Conference Paper |
| 2015 | Vorrichtung und Verfahren zur Prüfung von Schichtinhomogenitäten einer Fläche
Wolf, Christian; Fischer, Björn; Lehmann, Andreas | Patent |
| 2015 | Wear of abrasive media and its effect on abrasive flow machining results
Bremerstein, Tina; Potthoff, Annegret; Michaelis, Alexander; Schmiedel, Christian; Uhlmann, Eckart; Blug, Bernhard; Amann, Tobias | Journal Article |
| 2015 | Wear properties of chromium carbide based HVOF and HVAF thermal spray coatings up to 800°C
Janka, Leo; Norpoth, Jonas; Rodriguez Ripoll, Manel; Katsich, Christian; Trache, Richard; Toma, Filofteia-Laura; Thiele, Sven; Berger, Lutz-Michael | Conference Paper |
| 2015 | Zukunftspotentiale von Hochleistungskeramiken
Voigtsberger, Bärbel; Rossner, Wolfgang; Joachim, Klemens; Lenk, Reinhard; Hartmann, Martin | Journal Article |
| 2014 | (Bio)hybrid materials based on optically active particles
Reitzig, Manuela; Härtling, Thomas; Opitz, Jörg | Conference Paper |
| 2014 | (Mikro-)elektrochemische Untersuchungen zur Schichtdicke und den dielektrischen Eigenschaften dünner anodischer Oxidfilme auf Titan und TiAlV6-4
Langklotz, Ulrike
: Michaelis, Alexander | Dissertation |
| 2014 | 0.92 Pb(Mg1/3Nb2/3)O3 - 0.08 PbTiO3 relaxor ferroelectrics modified with different dopants for electrocaloric cooling application
Molin, Christian; Keitel, Uwe; Neumeister, Peter; Gebhardt, Sylvia; Schönecker, Andreas | Conference Paper |
| 2014 | 3D technology as a holistic approach - quo vadis?
Wolf, M. Jürgen; Schneider, Peter; Schulz, Stefan; Zschech, Ehrenfried | Presentation |
| 2014 | Acoustic devices for particle and cell manipulation and sensing
Qiu, Yongqiang; Wang, Han; Démoré, Christine; Hughes, David; Glynne-Jones, Peter; Gebhardt, Sylvia; Bolhovitins, Aleksandrs; Poltarjonoks, Romans; Weijer, Kees C.; Schönecker, Andreas; Hill, Martyn; Cochran, Sandy | Journal Article |
| 2014 | Acoustic emission analysis in the dynamic fatigue testing of fiber composite components
Weihnacht, Bianca; Schulze, Eberhard; Frankenstein, Bernd | Conference Paper |
| 2014 | Active functionality of piezoceramic modules integrated in aluminum high pressure die castings
Schwankl, M.; Rübner, M.; Flössel, M.; Gebhardt, S.; Michaelis, A.; Singer, R.F.; Koerner, C. | Journal Article |
| 2014 | Advanced 3D packaging of chips and materials integrity: Stress-induced effects and mechanical properties of new ultra low-k dielectrics for on-chip interconnect stacks
Sander, Christoph; Gall, Martin; Yeap, Kong Boon; Zschech, Ehrenfried | Conference Paper |
| 2014 | Advanced concepts for TDDB reliability in conjunction with 3D stress
Gall, Martin; Yeap, Kong Boon; Zschech, Ehrenfried | Conference Paper |
| 2014 | Advanced metallization concepts and impact on reliability
Hauschildt, Meike; Hintze, Bernd; Gall, Martin; Koschinsky, Frank; Preuße, Axel; Bolom, Tibor; Nopper, Markus; Beyer, Armand; Aubel, Oliver; Talut, Georg; Zschech, Ehrenfried | Journal Article |
| 2014 | Advanced methods for mechanical and structural characterization of nanoscale materials for 3D IC integration
Sander, Christoph; Standke, Yvonne; Niese, Sven; Rosenkranz, Rüdiger; Clausner, André; Gall, Martin; Zschech, Ehrenfried | Journal Article, Conference Paper |
| 2014 | AdvanCer Newsletter. Ausgabe 2014/1
: Freund, S.; Gaal, A. | Journal Issue |
| 2014 | AdvanCer Newsletter. Ausgabe 2014/2
Freund, Susanne; Gaal, Andrea | Journal Issue |
| 2014 | Advances in Barkhausen noise analysis
Meyendorf, Norbert; Hillmann, Susanne; Cikalova, Ulana; Schreiber, Jürgen | Conference Paper |
| 2014 | Advances in solid oxide fuel cells IX. Preface
Bansal, Narottam P.; Kusnezoff, Mihails | Conference Paper |
| 2014 | Aerosol jet printing of two component thick film resistors on LTCC
Swiecinski, K.; Ihle, Martin; Jurk, Robert; Dietzen, E.; Partsch, Uwe; Eberstein, Markus | Conference Paper |
| 2014 | Aging behavior of reactive air brazed seals for SOFC
Pönicke, Andreas; Schilm, Jochen; Kusnezoff, Mihails; Michaelis, Alexander | Conference Paper |
| 2014 | Aktuelle Trends in der Keramik
Stelter, Michael; Michaelis, Alexander | Conference Paper |
| 2014 | All-solid-state pH-Sensor in keramischer Multilayertechnologie
Feller, Claudia; Grießmann, Horst; Eberstein, Markus | Conference Paper |
| 2014 | Auswertevorrichtung für ein System zur Objekterfassung
Barth, Martin | Patent |
| 2014 | Auto-calibration principles for two-dimensional residual stress measurements by Barkhausen noise technique
Cikalova, Ulana; Schreiber, Jürgen; Hillmann, Susanne; Meyendorf, Norbert | Conference Paper |
| 2014 | Beitrag zur quantitativen Charakterisierung keramischer Granulate, Grünkörper und Werkstoffe im angesinterten Zustand
Höhn, Sören
: Michaelis, Alexander | Dissertation |
| 2014 | Biotechnological hydrogen production by photosynthesis
Weber, Jost; Krujatz, Felix; Hilpmann, Gerd; Grützner, Sara; Herrmann, Jana; Thierfelder, Simone; Bienert, Georg; Illing, Rico; Helbig, Karsten; Hurtado, Antonio; Gianaurelio, Cuniberti; Mertig, Michael; Lange, Rüdiger; Günther, Edeltraud; Opitz, Jörg; Lippmann, Wolfgang; Bley, Thomas; Haufe, Nora | Journal Article |
| 2014 | Chemical degradation of screen-printed thick films on LTCC
Junker, Nils; Rabbow, Thomas; Schneider, Michael; Schilm, Jochen; Michaelis, Alexander | Journal Article |
| 2014 | Co-firing technology for the preparation of asymmetric oxygen transporting membranes based on BSCF and Zr-doped BSCF
Pippardt, Ute; Böer, Jürgen; Kiesel, Lutz; Kircheisen, Robert; Kriegel, Ralf; Voigt, Ingolf | Journal Article |
| 2014 | Coatings
Kurzydlowski, Krzysztof; Boczkowska, Anna; Kozera, Rafał; Salacinska, Anna; Bielinski, Jerzy; Endler, Ingolf; Abidin, Alfaferi Zainal; Höhn, Mandy; Krug, Mario | Book Article |
| 2014 | Coatings by laser cladding
Nowotny, Steffen; Berger, Lutz-Michael; Spatzier, Jörg | Book Article |
| 2014 | Coatings by thermal spray
Berger, Lutz-Michael | Book Article |
| 2014 | Combination of pulse magnetron sputtering and atomic layer deposition for very low water vapor and oxygen transmission rates using cheap standard plastic substrates
Krug, Mario; Barth, Stephan; Endler, Ingolf; Glöß, Daniel; Fahlteich, John; Boeffel, Christine; Frach, Peter | Conference Paper |
| 2014 | Comments on "An extended hardness limit in bulk nanoceramics" by J.A. Wollmershauser, B.N. Feigelson, E.P. Gorzkowski, C.T. Ellis, R. Goswami, S.B. Qadri, J.G. Tischler, F.J. Kub, R.K. Everett, Acta Materialia 69 (2014) 9–16
Krell, Andreas | Journal Article |
| 2014 | A compact differential refractive index sensor based on localized surface plasmons
Derenko, Susan; Härtling, Thomas; Unglaube, Gregor; Eng, Lukas M.; Opitz, Jörg | Journal Article |
| 2014 | Comparative study of reactive and non-reactive sintering route for producing B6O-TiB2 materials
Johnson, O.T.; Sigalas, I.; Herrmann, M. | Journal Article |
| 2014 | Comparative study of the corrosion resistance of thermally sprayed ceramic coatings and their bulk ceramic counterparts
Herrmann, M.; Toma, F.-L.; Berger, L.-M.; Kaiser, G.; Stahr, C.C. | Journal Article |
| 2014 | Comparison between electromagnetic and electrical stimulation on human osteoblasts in vitro
Hiemer, B.; Jonitz-Heincke, A.; Su, Y.; Pasold, J.; Brand, M.; Lausch, H.; Hansmann, D.; Bader, R. | Conference Paper, Journal Article |
| 2014 | Comparison of thermo-mechanical characteristics of non-doped and 3 mol% B-site Zr-doped Ba0.5Sr0.5Co0.8Fe0.2O3-sigma
Pecanac, G.; Kiesel, L.; Kriegel, R.; Malzbender, J. | Journal Article |
| 2014 | Correction of eddy current measurements to obtain accordance with simulation results
Joneit, D.; Nadler, M.; Heuer, H. | Journal Article |
| 2014 | Correlations between microstructure and dielectric properties of hexagonal boron nitride
Steinborn, Clemens; Herrmann, Mathias; Keitel, Uwe; Schönecker, Andreas; Eichler, Jens | Journal Article |
| 2014 | Corrosion behaviour of silicon carbide-diamond composite materials in aqueous solutions
Herrmann, Mathias; Kluge, Eric; Rödel, Conny; McKie, Amanda; Staden, Frances van | Journal Article |
| 2014 | Corrosion of ceramic materials
Herrmann, Mathias; Klemm, Hagen | Book Article |
| 2014 | D2 enertrode: Production technologies and component integration of nanostructured carbon electrodes for energy technology - functionalized carbon materials for efficient electrical energy supply
Dörfler, Susanne; Pinkert, Katja; Weiser, Mathias; Wabnitz, Christian; Goldberg, Adrian; Ferse, Bernhard; Giebeler, Lars; Althues, Holger; Schneider, Michael; Eckert, Jürgen; Michaelis, Alexander; Beyer, Eckhard; Kaskel, Stefan | Journal Article |
| 2014 | Debris of potassium-magnesium silicate glass generated by femtosecond laser-induced ablation in air
Grehn, M.; Seuthe, T.; Reinhardt, F.; Höfner, M.; Griga, N.; Eberstein, M.; Bonse, J. | Journal Article, Conference Paper |
| 2014 | Defect detection in carbon fiber non-crimp fabrics and CRFP with high-frequency eddy current technique
Bardl, Georg; Nocke, Andreas; Cherif, Chokri; Kupke, Richard; Klein, Marcus; Heuer, Henning | Journal Article |
| 2014 | Defect strategies for an improved optical quality of transparent ceramics
Krell, Andreas; Hutzler, Thomas; Klimke, Jens | Journal Article |
| 2014 | Demands and economic aspects of thermal spraying with suspensions - an overview
Toma, Filofteia-Laura; Berger, Lutz-Michael; Potthoff, Annegret; Langner, Stefan | Conference Paper |
| 2014 | Description of the thermo-mechanical properties of a Sn-based solder alloy by a unified viscoplastic material model for finite element calculations
Kabakchiev, Alexander; Metais, B.; Ratchev, Roumen; Guyenot, Michael; Buhl, P.; Hossfeld, M.; Metasch, René; Röllig, Mike | Conference Paper |
| 2014 | Design, technology, and application of integrated piezoresistive scanning thermal microscopy (SThM) microcantilever
Janus, P.; Grabiec, P.; Sierakowski, A.; Gotszalk, T.; Rudek, M.; Kopiec, D.; Majstrzyk, W.; Boetsch, G.; Koehler, B. | Conference Paper |
| 2014 | Determination of residence time distributions in different high pressure gasification processes by radioactive tracers
Ortwein, A.; Zeuner, A.; Jentsch, T.; Zeißler, R.; Seifert, P.; Schlichting, H.; Meyer, B. | Journal Article |
| 2014 | Determination of yield stress from nano-indentation experiments
Clausner, André; Richter, Frank | Journal Article |
| 2014 | Detonation nanodiamonds biofunctionalization and immobilization to titanium alloy surfaces as first steps towards medical application
Goncalves, J.P.L.; Shaikh, A.Q.; Reitzig, M.; Kovalenko, D.A.; Michael, J.; Beutner, R.; Cuniberti, G.; Scharnweber, D.; Opitz, J. | Journal Article |
| 2014 | Development and testing of sealing glasses for SOFCs based on CFY-interconnects
Rost, Axel; Schilm, Jochen; Suffner, J.; Kusnezoff, Mihails; Michaelis, Alexander | Conference Paper |
| 2014 | Development of a robust, ceramic MEMS-package for hermetically sealed and highly shock-resistant SMD-devices
Goldberg, Adrian; Ihle, Martin; Ziesche, S.; Külls, Robert | Conference Paper |
| 2014 | Development of a SOFC/battery-hybrid system for distributed power generation in India
Pfeifer, Thomas; Barthel, Markus; Dosch, Christian; Megel, Stefan; Scholz, Matthias; Wunderlich, Christian | Conference Paper |
| 2014 | Development of laser-based joining technology for the fabrication of ceramic thermoelectric modules
Börner, Floriana-Dana; Schreier, Max; Feng, Bing; Lippmann, Wolfgang; Martin, Hans-Peter; Michaelis, Alexander; Hurtado, Antonio | Journal Article |
| 2014 | Development of planar and cylindrical refractories with graded microstructure
Scheithauer, Uwe; Slawik, Tim; Haderk, Kristin; Moritz, Tassilo; Michaelis, Alexander | Conference Paper |
| 2014 | Development of silicon heterojunction metal wrap through solar cells
Dirnstorfer, Ingo; Schilling, Niels; Körner, Stefan; Gierth, Paul; Sontag, Detlef; Jordan, Paul M.; Simon, Daniel K.; Fengler, Franz P.G.; Mikolajick, Thomas; Linaschke, Dorit; Dani, Ines; Marcinkowski, Manja; Eberstein, Markus; Rebenklau, Lars; Partsch, Uwe | Conference Paper |
| 2014 | Development of thermally sprayed Ca2Fe2O5 coatings for thermoelectrical applications
Barbosa, Maria M.; Puschmann, Roberto; Thiele, Sven; Toma, Filofteia-Laura; Martin, Hans-Peter; Berger, Lutz-Michael; Leyens, Christoph; Beyer, Eckhard; Laag, N.J. van der | Conference Paper |
| 2014 | Dispersion of nanomaterials used in toxicological studies: A comparison of sonication approaches demonstrated on TiO2 P25
Meißner, Tobias; Oelschlägel, Kathrin; Potthoff, Annegret | Journal Article |
| 2014 | Editorial. Case Studies in Nondestructive Testing and Evaluation
Köhler, B. | Journal Article |
| 2014 | The effect of bath aging on the microstructure of anodic oxide layers on AA1050
Schneider, Michael; Kremmer, Kerstin | Journal Article |
| 2014 | Effect of mechanical constraints in thin ceramic LTCC/PZT multilayers on the polarization behavior of the embedded PZT
Neumeister, Peter; Eßlinger, Sophia; Gebhardt, Sylvia; Schönecker, Andreas; Flössel, Markus | Journal Article |
| 2014 | Effect of process parameters on structure and piezoelectric properties of AlN and AlXSc1-XN films deposited by pulsed magnetron sputtering
Barth, Stephan; Bartzsch, Hagen; Glöß, Daniel; Frach, Peter; Zywitzki, Olaf; Herzog, Thomas; Walter, Susan; Heuer, Henning | Conference Paper |
| 2014 | Effect of solvent exchange on the stability of sterically functionalized magnetite nanoparticles in poly(methyl methacrylate) solutions and resulting spray dried composites
Bremerstein, Tina; Rudolph, Martin; Peuker, Urs Alexander | Journal Article |
| 2014 | The effect of solvents on the surface quality during ECM of WC
Schubert, Nora; Simunkova, Lenka; Schneider, Michael; Michaelis, Alexander | Conference Paper |
| 2014 | Effect of waveform of ac voltage on the morphology and crystallinity of electrochemically assembled platinum nanowires
Nerowski, Alexander; Pötschke, Markus; Wiesenhütter, Ulrich; Nicolai, Jürgen; Cikalova, Ulana; Dianat, Arezoo; Erbe, Artur; Opitz, Jörg; Bobeth, Manfred; Baraban, Larysa; Cuniberti, Gianaurelio | Journal Article |
| 2014 | Effective poling of hard PZT ceramics for high-power ultrasound applications
Eßlinger, Sophia; Neumeister, Peter; Schönecker, Andreas | Conference Paper |
| 2014 | Einfluss von Beschichtungspulver und HVOF-Spritzprozess auf die Eigenschaften von Cr3C2NiCr-Schichten
Trache, Richard; Shakhverdova, Irina; Puschmann, Roberto; Toma, Filofteia-Laura; Berger, Lutz-Michael; Thiele, Sven | Conference Paper |
| 2014 | Electrochemical corrosion of silicon carbide ceramics in H2SO4
Herrmann, M.; Sempf, K.; Schneider, M.; Sydow, U.; Kremmer, K.; Michaelis, A. | Journal Article |
| 2014 | Electrochemical corrosion of silicon carbide ceramics in sodium hydroxide
Herrmann, M.; Sempf, K.; Wendrock, H; Schneider, M.; Kremmer, K.; Michaelis, A. | Journal Article |
| 2014 | Electrochemical incineration of C-14-containing liquid wastes - first results and outlook
Friedrich, Hans-Jürgen; Zschornack, Daniel; Knappik, Reinhard; Müller, W. | Journal Article |
| 2014 | Electrochemical machining of cemented carbides
Schubert, Nora; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2014 | Electrochemical machining of hard metals - WC/Co as example
Lohrengel, M.M.; Rataj, K.P.; Schubert, N.; Schneider, Michael; Höhn, Sören; Michaelis, Alexander; Hackert-Oschätzchen, M.; Martin, A.; Schubert, A. | Journal Article |
| 2014 | Electromigration void nucleation and growth analysis using large-scale early failure statistics
Hauschildt, Meike; Gall, Martin; Hennesthal, Christian; Talut, Georg; Aubel, Oliver; Yeap, Kong Boon; Zschech, Ehrenfried | Conference Paper |
| 2014 | Empirical BEOL-TDDB evaluation based on I(t)-trace analysis
Aubel, Oliver; Beyer, Armand; Talut, Georg; Gall, Martin | Journal Article, Conference Paper |
| 2014 | The eneramic® power generator - a reliable fuel cell battery hybrid system for off-grid power supply
Pönicke, Andreas; Reuber, Sebastian; Wunderlich, Christian; Michaelis, Alexander | Presentation |
| 2014 | eneramic© – The mobile SOFC power generator well on its way to commercialization
Reuber, Sebastian; Pönicke, Andreas; Wunderlich, Christian; Michaelis, Alexander | Conference Paper |
| 2014 | Evaluation of long time stability of solder joints on Ag thick film conductors on Al2O3
Gierth, Paul; Zieschank, Michael; Rebenklau, Lars | Conference Paper |
| 2014 | Evaluation of low energy electron beam dose application by means of a portable optical device
Reitzig, Manuela; Winkler, Martin; Härtling, Thomas; Röder, Olaf; Opitz, Jörg | Journal Article |
| 2014 | Evaluation of TFR-characteristics in a wide temperature range
Partsch, Uwe; Lenz, Christian; Wenzel, Marco; Eberstein, Markus | Conference Paper |
| 2014 | Ex-service analysis of membrane tubes after the operation in a demonstrator unit
Rutkowski, B.; Kriegel, Ralf; Malzbender, Jürgen | Journal Article |
| 2014 | Examination of the porosity in reactive air brazed joints by ultrasonic testing
Tillmann, Wolfgang; Sievers, Norman; Pfeiffer, Jan; Wojarski, Lukas; Zielke, Reiner; Pönicke, Andreas; Schilm, Jochen | Journal Article |
| 2014 | Experimental investigation of the visco-plastic mechanical properties of a Sn-based solder alloy for material modelling in Finite Element calculations of automotive electronics
Metasch, René; Röllig, Mike; Kabakchiev, Alexander; Metais, B.; Ratchev, Roumen; Meier, Karsten; Wolter, Klaus-Jürgen | Conference Paper |
| 2014 | Experimentelle Methode zur Bestimmung der Stromdichteverteilung in porösen Interkalationselektroden
Heubner, Christian; Langklotz, Ulrike; Michaelis, Alexander; Schneider, Michael | Conference Paper |
| 2014 | Fabrication of customizable wedged multilayer Laue lenses by adding a stress layer
Niese, Sven; Krüger, Peter; Kubec, Adam; Laas, Roman; Gawlitza, Peter; Melzer, Kathleen; Braun, Stefan; Zschech, Ehrenfried | Journal Article |
| 2014 | Fabrication of short fiber reinforced SiCN by injection molding of preceramic polymers
Müller-Köhn, Axel; Janik, J.; Neubrand, Achim; Klemm, Hagen; Moritz, Tassilo; Michaelis, Alexander | Conference Paper |
| 2014 | Fallstudie über spezielle Prüfaufgaben für Luftfahrt-Komponenten aus Titanlegierungen
Hillmann, Susanne; Schiller-Bechert, David Maximilian; Bor, Zsolt; Meyendorf, Robert; Eylon, Daniel; Meyendorf, Norbert | Conference Paper |
| 2014 | Fatigue behaviour of hot pressed austenitic TWIP steel and TWIP steel/Mg-PSZ composite materials
Glage, A.; Weigelt, C.; Räthel, J.; Biermann, H. | Journal Article |
| 2014 | Femtosecond-laser induced ablation of silicate glasses and the intrinsic dissociation energy
Grehn, Moritz; Seuthe, Thomas; Höfner, Michael; Griga, Nils; Theiss, Christoph; Mermillod-Blondin, Alexandre; Eberstein, Markus; Eichler, Hans Joachim; Bonse, Jörn | Journal Article |
| 2014 | Fiber based structured materials for catalytic applications
Reichelt, Erik; Heddrich, Marc Philipp; Jahn, Matthias; Michaelis, Alexander | Journal Article |
| 2014 | Fiber polarization mode excitation applied to confocal microscopy
Zeh, Christoph; Härtling, Thomas | Conference Paper |
| 2014 | Field-assisted sintering technology/spark plasma sintering: Mechanisms, materials, and technology developments
Guillon, Olivier; Gonzalez-Julian, Jesus; Dargatz, Benjamin; Kessel, Tobias; Schierning, Gabi; Räthel, Jan; Herrmann, Mathias | Journal Article |
| 2014 | Filter-based interrogation of fiber bragg grating sensors
Wuchrer, Roland; Lautenschläger, Harald; Metasch, René; Röllig, Mike; Fleischer, Thomas; Härtling, Thomas | Conference Paper |
| 2014 | Folate functionalized nanodiamond particles, method for its preparation and their use
Lapina, Viktoriya; Opitz, Jörg; Borobey, Alexander; Pavich, Tatjana; Schreiber, Jürgen | Patent |
| 2014 | Fractal dimension of time-resolved autofluorescence discriminates tumour from healthy tissues in the oral cavity
Klatt, J.; Gerich, C.E.; Gröbe, A.; Opitz, J.; Schreiber, J.; Hanken, H.; Salomon, G.; Heiland, M.; Kluwe, L.; Blessmann, M. | Journal Article |
| 2014 | Fraunhofer cluster 3D integration
Wolf, M. Jürgen; Schulz, Stefan; Schneider, Peter; Zschech, Ehrenfried | Conference Paper |
| 2014 | Fraunhofer cluster 3D integration - key to a holistic technology and service approach
Wolf, Jürgen M.; Schulz, Stefan; Schneider, Peter; Zschech, Ehrenfried | Conference Paper |
| 2014 | Fraunhofer-Institut für Keramische Technologien und Systeme. Jahresbericht 2013/2014
| Annual Report |
| 2014 | Frontseitenkontaktierung polykristalliner Siliziumsolarzellen mittels bleifreier ZnO-haltiger Gläser in Silberpasten
Peschel, Maik
: Michaelis, Alexander | Dissertation |
| 2014 | Fügetechnologien für keramikbasierte thermoelektrische Module
Pönicke, Andreas; Rost, Axel; Schilm, Jochen; Martin, Hans-Peter; Kusnezoff, Mihails | Presentation |
| 2014 | Full-field X-ray microscopy with crossed partial multilayer Laue lenses
Niese, Sven; Krüger, Peter; Kubec, Adam; Braun, Stefan; Patommel, Jens; Schroer, Christian G.; Leson, Andreas; Zschech, Ehrenfried | Journal Article |
| 2014 | Funktionalisierung von Keramikoberflächen durch thermisch gespritzte Schichten
Toma, Filofteia-Laura; Berger, Lutz-Michael; Kuntze, Thomas; Scheitz, Stefan; Thiele, Sven | Journal Article |
| 2014 | Galvanic corrosion of metal/ceramic coupling
Schneider, M.; Kremmer, K.; Lämmel, C.; Sempf, K.; Herrmann, M. | Journal Article |
| 2014 | GigaSonic - Untersuchungen an hochfrequenten Dünnschichtschwingern für zukünftige Phased-Array-Sensoren
Herzog, Thomas; Walter, Susan; Heuer, Henning | Journal Article |
| 2014 | GigaSonic - Untersuchungen an hochfrequenten Dünnschichtschwingern für zukünftige Phased-Array-Sensoren
Herzog, Thomas; Walter, Susan; Heuer, Henning | Journal Article |
| 2014 | Grain growth during sintering of tungsten carbide ceramics
Poetschke, Johannes; Richter, Volkmar; Gestrich, Tim; Michaelis, Alexander | Journal Article |
| 2014 | Herstellung und Charakterisierung von kompakten bindemittelfreien Zeolithformkörpern mit Faujasit- und Linde Typ A-Struktur
Schumann, Kristin; Unger, Baldur; Brandt, Alfons; Fischer, Gundula; Richter, Hannes; Jänchen, Jochen | Journal Article |
| 2014 | High-temperature corrosion of aluminium nitride ceramics by coal ashes
Himpel, G.; Herrmann, M.; Höhn, S.; Klinger, M. | Journal Article |
| 2014 | High-temperature corrosion of silicon carbide ceramics by coal ashes
Herrmann, M.; Standke, G.; Höhn, S.; Himpel, G.; Gestrich, T. | Journal Article |
| 2014 | High-temperature stability and saturation magnetization of superparamagnetic nickel nanoparticles in microporous polysilazane-derived ceramics and their gas permeation properties
Seifollahi Bazarjani, Mahdi; Müller, Mathis; Kleebe, Hans Joachim; Jüttke, Yvonne; Voigt, Ingolf; Baghaie Yazdi, Mehrdad; Alff, Lambert; Riedel, Ralf; Gurlo, Aleksander | Journal Article |
| 2014 | Identification of process parameters for efficient poling of PZT ceramics for mass production
Nicolai, Michael; Eßlinger, Sophia; Schönecker, Andreas | Journal Article |
| 2014 | Implications of the stability behavior of zinc oxide nanoparticles for toxicological studies
Meißner, Tobias; Oelschlägel, Kathrin; Potthoff, Annegret | Journal Article |
| 2014 | Improving the rate capability of high voltage Lithium-ion battery cathode material LiNi0.5Mn1.5O4 by ruthenium doping
Kiziltaş-Yavuz, Nilüfer; Bhaskar, Aiswarya; Dixon, Ditty; Yavuz, Murat; Nikolowski, Kristian; Lu, Li; Eichel, Rüdiger; Ehrenberg, Helmut | Journal Article |
| 2014 | In situ study on low-k interconnect time-dependent-dielectric-breakdown mechanisms
Yeap, Kong Boon; Gall, Martin; Liao, Zhongquan; Sander, Christoph; Mühle, Uwe; Justison, Patrick; Aubel, Oliver; Hauschildt, Meike; Beyer, Armand; Vogel, Norman; Zschech, Ehrenfried | Journal Article |
| 2014 | In-situ investigations of individual nanowires within a FIB/SEM system
Löffler, Markus; Banerjee, Sayanti; Trommer, Jens; Heinzig, André; Weber, Walter; Zschech, Ehrenfried | Journal Article, Conference Paper |
| 2014 | In-situ observations of glass frit related effects during the front side paste contact formation
Eberstein, Markus; Schmidt, Ulrike; Körner, Stefan; Reinhardt, Kathrin; Jurk, Robert; Partsch, Uwe | Conference Paper |
| 2014 | Influence of Cr3C2-NiCr feedstock powder characteristics on the deposition efficiency, coating microstructures and abrasion wear resistance
Berger, Lutz-Michael; Thiele, Sven; Börner, Tim; Janka, L.C.; Rodriguez Ripoll, M. | Conference Paper |
| 2014 | Influence of oxygen micro atmosphere during contact formation
Körner, Stefan; Reinhardt, Kathrin; Partsch, Uwe; Eberstein, Markus | Journal Article, Conference Paper |
| 2014 | Influence of sample thickness and concentration of Ce dopant on the optical properties of YAG:Ce ceramic phosphors for white LEDs
Wätzig, Katja; Kunzer, Michael; Kinski, Isabel | Journal Article |
| 2014 | Influence of small additions of MeC on properties of binderless tungsten carbide
Poetschke, J.; Richter, V.; Michaelis, A. | Conference Paper |
| 2014 | Influence of tantalum on the microstructure and properties of Ti(C,N)-Ni cermets
Naidoo, M.; Johnson, O.; Sigalas, I.; Herrmann, M. | Journal Article |
| 2014 | Innovationen in der Membranfiltration zur Industrieabwasserreinigung
Voigt, Ingolf | Conference Paper |
| 2014 | An innovative contact heating method in the thermoforming process
Claus, Ronald; Stein, Marcus; Bach, Sascha; Majschak, Jens Peter; Partsch, Uwe; Grießmann, Horst | Conference Paper |
| 2014 | Innovative kiln furniture, their influence on the temperature distribution within the kiln, and a new production technology
Scheithauer, Uwe; Dannowski, Marcel; Schwarzer, Eric; Slawik, Tim | Journal Article |
| 2014 | Integration of Ni-Cu-Zn and Hexagonal Ferrites into LTCC Modules: Cofiring Strategies and Magnetic Properties
Töpfer, J.; Hesse, J.; Bierlich, S.; Barth, S.; Capraro, B.; Rabe, T.; Nagib-Zadeh, H.; Bartsch, H. | Journal Article |
| 2014 | Investigation of HVOF-sprayed (Ti,Mo)(C,N)-Ni hardmetal coatings for static friction applications
Berger, Lutz-Michael; Shakhverdova, Irina; Puschmann, Roberto; Gräfensteiner, D.M.; Leidich, E.; Schiefer, S.; Gerlach, M. | Conference Paper |
| 2014 | Investigations on mobility of carbon colloid supported nanoscale zero-valent iron (nZVI) in a column experiment and a laboratory 2D-aquifer test system
Busch, Jan; Meißner, Tobias; Potthoff, Annegret; Oswald, Sascha | Journal Article |
| 2014 | Kathoden-Elektrolyt-Anodeneinheit von Hochtemperatur-Brennstoffzellen
Dietzen, Egle; Trofimenko, Nikolai; Kusnezoff, Mihails; Sauchuk, Viktar | Patent |
| 2014 | Laser-supported joining of SiC-fiber/SiCN ceramic matrix composites fabricated by precursor infiltration
Herrmann, Marion; Schönfeld, Katrin; Klemm, Hagen; Lippmann, Wolfgang; Hurtado, Antonio; Michaelis, Alexander | Journal Article |
| 2014 | Lebensdauer von SMD-Lotkontakten unter kombinierter Vibrations- und Temperaturbelastung
Meier, Karsten; Lautenschläger, Georg; Wolter, Klaus-Jürgen; Röllig, Mike; Schießl, Andreas | Journal Article |
| 2014 | Lebensdauerbestimmung für Lotkontakte von SMD-Bauelementen unter Vibrations- und Temperaturbelastung
Meier, Karsten; Lautenschläger, Georg; Röllig, Mike; Schießl, Andreas; Wolter, Klaus-Jürgen | Conference Paper |
| 2014 | Li-ion conducting solid electrolytes
Rost, Axel; Schilm, Jochen; Kusnezoff, Mihails; Michaelis, Alexander | Conference Paper |
| 2014 | LIGNO-BIOGAS: Biogasgewinnung aus lignozellulosehaltigen Reststoffen
Wufka, André | Conference Paper |
| 2014 | Localization of defects in pipes using guided waves and synthetic aperture focussing technique (saft)
Gaul, Tobias; Schubert, Lars; Weihnacht, Bianca; Frankenstein, Bernd | Conference Paper |
| 2014 | Managing stress-induced effects on performance and reliability of 3D IC stacks
Zschech, Ehrenfried | Abstract |
| 2014 | Manchmal ist kaputt besser - Substratvorbehandlung
Schwarz, Björn | Journal Article |
| 2014 | Manufacture and testing of thermoelectric modules consisting of BxC and TiOx elements
Feng, Bing; Martin, Hans-Peter; Börner, Floriana-Dana; Lippmann, Wolfgang; Schreier, Max; Vogel, Karin; Lenk, Andreas; Veremchuk, Igor; Dannowski, Marcel; Richter, Christin; Pfeiffer, Peter; Zikoridse, Gennadi; Lichte, Hannes; Grin, Juri; Hurtado, Antonio; Michaelis, Alexander | Journal Article |
| 2014 | Manufacturing of two-colored co-sintered zirconia components by inmold-labelling and 2C-injection molding
Mannschatz, Anne; Härtel, Anja; Müller-Köhn, Axel; Moritz, Tassilo; Michaelis, Alexander; Wilde, Mathias | Journal Article |
| 2014 | Manufacturing processes for TiOx-based thermoelectric modules: From suboxide synthesis to module testing
Conze, S.; Poenicke, A.; Martin, H.-P.; Rost, A.; Kinski, I.; Schilm, J.; Michaelis, A. | Journal Article |
| 2014 | Materialentwicklung und verfahrenstechnische Erprobung eines energie- und rohstoffeffizienten Entschwefelungssystems für Biogas
Lincke, Marc; Poss, René; Tillmann, Andreas; Klöden, Burghardt; Gläser, Stefan; Faßauer, Burkhardt | Journal Article |
| 2014 | Measurement of retention functions with hysteresis using ground-penetrating radar
Weihnacht, B.; Boerner, F. | Journal Article |
| 2014 | Mechanical properties of hot-pressed boron suboxide with chromium boride additive
Ogunmuyiwa, Enoch N.; Johnson, Oluwagbenga T.; Sigalas, Iakovos; Herrmann, Mathias; Afolabi, Ayo Samuel | Conference Paper |
| 2014 | Mechanical properties of porous MgO substrates for membrane applications
Lipińska-Chwałek, Marta; Kiesel, Lutz; Malzbender, Jürgen | Journal Article |
| 2014 | Metal nano-inks: From synthesis to application
Mosch, S.; Fritsch, M.; Trofimenko, N.; Jurk, R. | Journal Article |
| 2014 | Metal–ceramic layered materials and composites manufactured using powder techniques
Slawik, Tim; Bergner, Anne; Puschmann, Roberto; Franke, Peter; Räthel, Jan; Behnisch, Thomas; Scholl, Roland; Berger, Lutz-Michael; Moritz, Tassilo; Zelm, Roland; Gude, Maik; Michaelis, Alexander; Beyer, Eckhard; Leyens, Christoph; Großmann, Harald; Kieback, Bernd | Journal Article |
| 2014 | Microscopic in-operando thermography at the cross section of a single lithium ion battery stack
Heubner, Christian; Lämmel, Christoph; Junker, Nils; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2014 | A modeling platform for ultrasonic immersion testing of polycrystalline materials with flaws
Schubert, Frank | Conference Paper |
| 2014 | Modification of internal granule structure via spray-drying parameters
Eckhard, Susanna; Fries, Manfred | Conference Paper |
| 2014 | Modification of internal granule structure via spray-drying parameters
Eckhard, Susanna; Fries, Manfred | Conference Paper |
| 2014 | Modification of the mechanical granule properties via internal structure
Eckhard, Susanna; Fries, Manfred; Teipel, Ulrich; Antonyuk, Sergiy; Heinrich, Stefan | Journal Article |
| 2014 | Modified Sinter Unit (MSU) for sintering of metal and ceramic powder compacts
Scholl, R.; Slawik, T.; Moritz, T.; Michaelis, A. | Conference Paper |
| 2014 | Monolithic micro-positioning stage on piezo thick film technology
Bramlage, Bernhard; Ernst, Dörthe; Gebhardt, Sylvia | Conference Paper |
| 2014 | Multi-scale simulation flow and multi-scale materials characterization for stress management in 3D through-silicon-via integration technologies - effect of stress on 3D IC interconnect reliability
Sukharev, Valeriy; Zschech, Ehrenfried | Conference Paper |
| 2014 | Multi-scale X-ray tomography for process and quality control in 3D TSV packaging
Zschech, Ehrenfried; Niese, Sven; Löffler, Markus; Wolf, M. Jürgen | Conference Paper |
| 2014 | Nano-modified flexible multi-electrode array with an integrated flexible CMOS-chip for medical and biological applications
Winkin, Nadine; Gierth, Uta; Mokwa, W.; Schneider, Michael | Book Article |
| 2014 | Neues und verbessertes Verfahren zur Prüfung von Rohrrundschweißnähten
Hillmann, Susanne; Schiller-Bechert, David Maximilian; Uhlemann, Frank | Journal Article |
| 2014 | A new Barkhausen noise technique for applications at miniaturized geometries
Hillmann, Susanne; Meyendorf, Norbert | Conference Paper |
| 2014 | New developments of FAST/SPS tool materials
Räthel, Jan; Hennicke, Jürgen; Dyatlova, Yanina; Herrmann, Mathias; Rumyantsev, Vladimir | Conference Paper |
| 2014 | A new in situ microscopy approach to study the degradation and failure mechanisms of time-dependent dielectric breakdown: Set-up and opportunities
Liao, Zhongquan; Gall, Martin; Yeap, Kong Boon; Sander, Christoph; Aubel, Oliver; Mühle, Uwe; Gluch, Jürgen; Niese, Sven; Standke, Yvonne; Rosenkranz, Rüdiger; Löffler, Markus; Vogel, Norman; Beyer, Armand; Engelmann, Hans Jürgen; Guttmann, Peter; Schneider, Gerhard; Zschech, Ehrenfried | Journal Article |
| 2014 | Non-destructive flaw detection in in-situ carbon fibre reinforced composites using eddy-current
Heuer, H.; Schulze, M.; Heere, R. | Abstract |
| 2014 | Novel generation of kiln furniture
Scheithauer, Uwe; Freytag, Christian; Haderk, Kristin; Moritz, Tassilo; Zins, Michael; Michaelis, Alexander | Conference Paper |
| 2014 | Numerical and experimental studies towards improvements in laser-acoustic microscopy by optical-based sound beam shaping
Windisch, Thomas | Journal Article, Conference Paper |
| 2014 | Observation of the contact formation of PV frontside pastes by in-situ contact resistance measurement
Reinhardt, Kathrin; Schmidt, Ulrike; Körner, Stefan; Jurk, Robert; Partsch, Uwe; Eberstein, Markus | Journal Article, Conference Paper |
| 2014 | Operating results of the SOFC20 stationary SOFC CHP system using a CFY-stack platform
Hauth, Martin; Rechberger, Jürgen; Megel, Stefan; Kusnezoff, Mihails | Conference Paper |
| 2014 | Optimization of the synthesis of boron suboxide powders
Ogunmuyiwa, Enoch N.; Johnson, Oluwagbenga T.; Sigalas, Iakovos; Herrmann, Mathias; Afolabi, Ayo Samuel | Conference Paper |
| 2014 | Optimized shaping process for transparent spinel ceramic
Kaiser, Alfred; Hutzler, Thomas; Krell, Andreas; Kremer, Robert | Conference Paper |
| 2014 | Optimized shaping process for transparent spinel ceramic
Kaiser, A.; Hutzler, T.; Krell, A.; Kremer, R. | Conference Paper |
| 2014 | Optische In-situ-Beobachtung des anodischen Auflösungsverhaltens von Kupfer unter ECM-nahen Bedingungen
Schroth, Stephan
: Michaelis, Alexander | Dissertation |
| 2014 | Order of influences on the ballistic resistance of armor ceramics and single crystals
Krell, Andreas; Strassburger, Elmar | Journal Article |
| 2014 | Parameters influencing the photocatalytic activity of suspension-sprayed TiO2 coatings
Toma, Filofteia-Laura; Berger, Lutz-Michael; Shakhverdova, Irina; Leupolt, Beate; Potthoff, Annegret; Oelschlägel, Kathrin; Meißner, Tobias; Gomez, José Antonio Ibáñez; Miguel, Yolanda de | Journal Article |
| 2014 | Partikelfilter
Mammitzsch, Lars; Petasch, Uwe; Adler, Jörg; Wiegmann, Andreas; Cheng, Liping | Patent |
| 2014 | Performance and stability of mixed conducting composite membranes based on substituted ceria
Pippardt, U.; Böer, J.; Bollert, C.; Hoffmann, A.; Heidenreich, M.; Kriegel, R.; Schulz, M.; Simon, A. | Journal Article |
| 2014 | Phased array ultrasonic testing of dissimilar metal welds using geometric based referencing delay law technique
Han, Tae-Young
: Meyendorf, Norbert (Betreuender Hochschullehrer); Wolter, Klaus-Jürgen (Vorsitzender der Promotionskommission); Seo, Jong-Bum (Gutachter) | Dissertation |
| 2014 | Phasenbeziehungen und kinetische Modellierung von flüssigphasengesintertem SiC mit oxidischen und nitridischen Additiven
Neher, Roland
: Michaelis, Alexander; Seifert, Hans Jürgen | Dissertation |
| 2014 | Physics-based simulation of EM and SM in TSV-based 3D IC structures
Kteyan, Armen; Sukharev, Valeriy; Zschech, Ehrenfried | Conference Paper |
| 2014 | Piezokeramische Dickschichttechnik für Optische Anwendungen - Deformierbare Spiegel und hochintegrierbare Stellelemente
Bramlage, Bernhard; Ernst, Dörthe; Gebhardt, Sylvia; Pabst, Oliver; Reinlein, Claudia | Conference Paper |
| 2014 | Plenoptic camera with adaptable dephth of field using PZT thick film actuators
Ernst, Dörthe; Bramlage, Bernhard; Gebhardt, Sylvia; Oberdörster, Alexander; Pabst, Oliver; Wippermann, Frank | Conference Paper |
| 2014 | Polarization characterization of PZT disks and of embedded PZT plates by thermal wave methods
Eydam, Agnes; Suchaneck, Gunnar; Eßlinger, Sophia; Schönecker, Andreas; Neumeister, Peter; Gerlach, Gerald | Conference Paper |
| 2014 | Porous perovskite fibers - preparation by wet phase inversion spinning and catalytic activity
Kaiser, Sandy; Reichelt, Erik; Gebhardt, Sylvia; Jahn, Matthias; Michaelis, Alexander | Journal Article |
| 2014 | Prediction and validation of fiber orientation in short fiber reinforced injection molded SiCN-ceramics
Müller-Köhn, Axel; Ahlhelm, Matthias; Moritz, Tassilo; Michaelis, Alexander; Ladisch, S. | Journal Article |
| 2014 | Preparation and characterization of a transparent, photoluminescent MgAl2O4:Eu2+ ceramic
Wätzig, Katja; Kinski, Isabel | Journal Article |
| 2014 | Preparation and characterization of new low MWCO ceramic nanofiltration membranes for organic solvents
Zeidler, Stefanie; Puhlfürß, Petra; Kätzel, Uwe; Voigt, Ingolf | Journal Article |
| 2014 | PROKOSYS: Prozesse, Komponenten und Systeme für den flexibilisierten Betrieb von Biogasanlagen unter Nutzung biogener Rest- und Abfallstoffe
Faßauer, Burkhardt; Schwarz, Björn | Conference Paper |
| 2014 | Ptychography with multilayer Laue lenses
Kubec, Adam; Braun, Stefan; Niese, Sven; Krüger, Peter; Patommel, Jens; Hecker, Michael; Leson, Andreas; Schroer, Christian G. | Journal Article |
| 2014 | Pulvergemisch für die Herstellung metallischer und/oder keramischer Bauteile, Verfahren zur Herstellung des Pulvergemischs sowie Verfahren zur Herstellung von Bauteilen
Scholl, Roland; Slawik, Tim; Scheithauer, Uwe | Patent |
| 2014 | Quantification of Al₂O₃ nanoparticles in human cell lines applying inductively coupled plasma mass spectrometry (neb-ICP-MS, LA-ICP-MS) and flow cytometry-based methods
Böhme, Steffi; Stärk, Hans-Joachim; Meißner, Tobias; Springer, Armin; Reemtsma, Thorsten; Kühnel, Dana; Busch, Wibke | Journal Article |
| 2014 | Quantitative estimate of fs-laser induced refractive index changes in the bulk of various transparent materials
Mermillod-Blondin, Alexandre; Seuthe, Thomas; Eberstein, Markus; Grehn, Moritz; Bonse, Jörn; Rosenfeld, Arkadi | Conference Paper |
| 2014 | Reactive sintering process and thermoelectric properties of boron rich boron carbides
Roszeitis, S.; Feng, B.; Martin, H.-P.; Michaelis, A. | Journal Article |
| 2014 | Reliability assessment of discrete passive components embedded into PCB core
Schwerz, Robert; Röllig, Mike; Osmolovskyi, Sergii; Wolter, Klaus-Jürgen | Conference Paper |
| 2014 | Reliability study on chip capacitor solder joints under thermo-mechanical and vibration loading
Meier, Karsten; Röllig, Mike; Schießl, Andreas; Wolter, Klaus-Jürgen | Conference Paper |
| 2014 | Rheologisches Verhalten der beim Strömungsschleifen genutzten SiC-Suspensionen
Bremerstein, Tina; Höhn, Sören; Potthoff, Annegret; Blug, Bernhard; Amann, Tobias | Journal Article |
| 2014 | Scannende Erfassung von Ultraschall-Wellenfeldern für die Zerstörungsfreie Prüfung, die Zerstörungsfreie Materialcharakterisierung und die Strukturüberwachung
Köhler, Bernd
: Gerlach, Gerald (Vorsitzender); Wolter, Klaus-Jürgen (Gutachter); Boller, Christian (Gutachter); Mook, Gerhardt (Gutachter) | Habilitation |
| 2014 | Schnellere Serienproduktion von Lithium-Ionen-Batterien
Ebert, Lars; Roscher, Michael; Wolter, Mareike | Journal Article |
| 2014 | Schottky barrier-based silicon nanowire pH sensor with live sensitivity control
Zörgiebel, F.M.; Pregl, S.; Römhildt, L.; Opitz, J.; Weber, W.; Mikolajick, T.; Baraban, L.; Cuniberti, G. | Journal Article |
| 2014 | Schweißtechnische Erzeugung und spanende Bearbeitung von Beschichtungen auf (Ti,Mo)(C,N)-Ni-Basis
Zobel, Frank; Dültgen, Peter; Spatzier, Jörg; Nowotny, Steffen; Berger, Lutz-Michael; Wocilka, Danilo; Frank, Dirk | Journal Article |
| 2014 | Sensors for environmental monitoring based on localized surface plasmons
Derenko, Susan
: Eng, Lukas (1. Gutachter); Opitz, Jörg (Betreuer); Zhang, Jing (2. Gutachter) | Dissertation |
| 2014 | Separators - technology review: Ceramic based separators for secondary batteries
Nestler, Tina; Schmid, Robert; Münchgesang, Wolfram; Bazhenov, Vasilii; Schilm, Jochen; Leisegang, Tilmann; Meyer, Dirk C. | Conference Paper |
| 2014 | SiC-diamond materials: Wear-resistant and versatile
Herrmann, Mathias; Matthey, Björn; Kunze, Steffen; Petasch, Uwe | Journal Article |
| 2014 | Siliciumcarbid-Feuerfestwerkstoffe für Vergasungsreaktoren
Standke, Gisela; Herrmann, Mathias; Kunze, Steffen; Heymer, Heike; Adler, Jörg; Höhn, Sören | Journal Article |
| 2014 | Sinterunterlage
Scholl, Roland; Slawik, Tim | Patent |
| 2014 | Smart solutions for a sustainable future – advances in smart materials, production technologies and applications
Schönecker, Andreas | Conference Paper |
| 2014 | Sputter deposition of piezoelectric AlN and AlScN films for ultrasonic and energy harvesting applications
Barth, Stefan; Glöß, Daniel; Bartzsch, Hagen; Juuti, J.; Gerlach, Gerald; Suchaneck, Günther; Heuer, Henning; Walter, Susan; Herzog, Thomas; Frach, Peter; Palosaari, J. | Conference Paper |
| 2014 | Sputter deposition of stress-controlled piezoelectric AlN and AlScN films for ultrasonic and energy harvesting applications
Barth, Stefan; Bartzsch, Hagen; Glöß, Daniel; Walter, Susann; Herzog, Thomas; Frach, Peter; Heuer, Henning | Journal Article |
| 2014 | Steady-state creep of porous and an extended analysis on the creep of dense BSCFZ perovskite
Pećanac, Goran; Kiesel, Lutz; Malzbender, Jürgen | Journal Article |
| 2014 | Steuerungsvorrichtung für einen Anregungssignal-Generator
Barth, Martin | Patent |
| 2014 | Strength characterization of tubular ceramic materials by flexure of semi-cylindrical specimens
Kwok, K.; Kiesel, L.; Frandsen, H.L.; Søgaard, M.; Hendriksen, P.V. | Journal Article |
| 2014 | Structural Health Monitoring (SHM) für ausgedehnte Rohrkomponenten mit geführten Wellen
Weihnacht, Bianca; Frankenstein, Bernd; Gaul, Tobias; Schubert, Lars; Schulze, Eberhard | Conference Paper |
| 2014 | Studies on the polarisation behaviour of novel piezoelectric sensor modules
Geller, Sirko; Neumeister, Peter; Gude, Maik; Tyczynski, Thomas | Journal Article |
| 2014 | Studies on thermoplastic 3D printing of steel-zirconia composites
Scheithauer, Uwe; Bergner, Anne; Schwarzer, Eric; Richter, Hans-Jürgen; Moritz, Tassilo | Journal Article |
| 2014 | Summary of the "Open space technology discussions" on reliability of NDE
Bertovic, Marija; Calmon, Pierre; Carter, Luke; Fischer, Jay; Forsyth, David; Holstein, Ralf; McGrath, Bernard; Müller, Christina; Pavlovic, Mato; Ronneteg, Ulf; Rummel, Ward; Schubert, Frank; Selby, Greg | Journal Article |
| 2014 | Superharte Werkstoffe auf der Basis von Borsuboxid (B60)
Thiele, Maik
: Michaelis, Alexander (Gutachter / Betreuer); Kleebe, Hans Joachim (Gutachter); Eckert, J. (Vorsitzender der Promotionskommission) | Dissertation |
| 2014 | Superplastic deformation of Si3N4 based nanocomposites reinforced by nanowhiskers
Zgalat-Lozynskyy, O.; Andrzejczuk, Mariusz; Varchenko, V.; Herrmann, Mathias; Ragulya, Andrey; Polotai, Anton | Journal Article |
| 2014 | Surface-enhanced infrared spectroscopy using nanometer-sized gaps
Huck, Christian; Neubrech, Frank; Vogt, Jochen; Toma, Andrea; Gerbert, David; Katzmann, Julia; Härtling, Thomas; Pucci, Annemarie | Journal Article |
| 2014 | Symposium "Angewandte Elektrochemie in der Materialforschung" 2014. Elektrochemische Methoden in der Batterieforschung. Gut gemacht. Aber richtig interpretiert?
: Michaelis, Alexander; Schneider, Michael | Conference Proceedings |
| 2014 | Synthesegaserzeugung aus Biogas - Reaktordesign und Integration in ein Festoxidbrennstoffzellensystem
Jahn, Matthias; Reichelt, Erik; Heddrich, Marc; Weder, Aniko | Journal Article |
| 2014 | Synthesis and characterization of carbon nanowalls on different substrates by radio frequency plasma enhanced chemical vapor deposition
Davami, K.; Shaygan, M.; Kheirabi, N.; Zhao, J.; Kovalenko, D.A.; Rümmeli, M.H.; Opitz, J.; Cuniberti, G.; Lee, J.-S.; Meyyappan, M. | Journal Article |
| 2014 | Synthesis of nano metal particles for low sintering conductive inks
Jurk, Robert; Mosch, Sindy; Fritsch, Marco; Ihle, Martin | Conference Paper |
| 2014 | Synthetisches Knochenersatzmaterial und Verfahren zu seiner Herstellung
Ahlhelm, Matthias; Moritz, Tassilo | Patent |
| 2014 | System performance comparison employing either partial oxidation or anode offgas circulation as reforming methods within a biogas SOFC system
Heddrich, Marc; Reichelt, Erik; Albrecht, T.; Greß, C.; Jahn, Matthias; Näke, Ralf | Conference Paper |
| 2014 | TEM investigation of the interface formation in cubic boron nitride containing α-SiAlON composites
Garett, Jethro C.; Sigalas, Iakovos; Herrmann, Mathias | Journal Article |
| 2014 | Temperature measurement under near-ECM conditions
Schneider, Michael; Schubert, Nora; Michaelis, Alexander | Conference Paper |
| 2014 | Testing of thermally piezoelectric deformable mirror with buried functionality
Reinlein, Claudia; Appelfelder, Michael; Goy, Matthias; Gebhardt, Sylvia; Gutzeit, Nam | Conference Paper |
| 2014 | Thermisch gespritzte Schichten im System Al2O3–Cr2O3–TiO2 - ein Update
Berger, Lutz-Michael; Toma, Filofteia-Laura; Scheitz, Stefan; Trache, Richard; Börner, Tim | Journal Article |
| 2014 | Thick film pastes for silicon nitride ceramics
Wenzel, Marco; Schmidt, Richard; Partsch, Uwe; Eberstein, Markus | Conference Paper |
| 2014 | Third order elastic constants and rayleigh wave dispersion of shot peened aero-engine materials
Rjelka, Marek; Barth, Martin; Reinert, Sven; Köhler, Bernd; Bamberg, Joachim; Baron, Hans Uwe; Hessert, Roland | Conference Paper |
| 2014 | Towards efficient integrated piezoelectric transducers for sensing, actuation and SHM
Neumeister, Peter; Flössel, Markus; Eßlinger, Sophia; Gebhardt, Sylvia; Schönecker, Andreas | Conference Paper |
| 2014 | Transparentkeramik als Alternative zu Einkristallen
Wätzig, Katja | Journal Article |
| 2014 | Transport of carbon colloid supported nanoscale zero-valent iron in saturated porous media
Busch, Jan; Meißner, Tobias; Potthoff, Annegret; Oswald, Sascha | Journal Article |
| 2014 | Untersuchung des Trocknungsverhaltens von dünnen, elektrisch leitfähigen Lacken mit dem Wirbelstromverfahren
Patsora, Iryna; Hillmann, Susanne; Heuer, Henning; Calzada, Juan G.; Cooney, Adam T.; Foos, Bryan C. | Conference Paper |
| 2014 | Use of phase inversion processes for additive manufacturing of ceramics
Scheithauer, Uwe; Schwarzer, Eric; Schweigard, Lisa; Haderk, Kristin; Visotschnig, Roland; Richter, Hans-Jürgen | Conference Paper |
| 2014 | Variation der mechanischen Eigenschaften von Sprühgranulaten über die innere Struktur
Eckhard, Susanna; Fries, Manfred; Teipel, Ulrich | Journal Article |
| 2014 | Verfahren und Membranmodul zur energieeffizienten Sauerstofferzeugung in der Biomassevergasung
Kriegel, Ralf | Patent |
| 2014 | Verfahren zur Bestimmung der elektrischen Leitfähigkeit an Proben mittels eines Wirbelstromsensors
Joneit, Dieter | Patent |
| 2014 | Verfahren zur Herstellung von gesinterten Bauteilen
Abel, Johannes; Scheithauer, Uwe | Patent |
| 2014 | Vorhersage und Validierung der Faserorientierung in kurzfaserverstärkten, spritzgegossenen SiCN-Keramiken
Müller-Köhn, Axel; Ahlhelm, Matthias; Laddisch, Stefan; Moritz, Tassilo; Michaelis, Alexander | Book Article |
| 2014 | Welding for testability: An approach aimed at improving the ultrasonic testing of thick-walled austenitic and dissimilar metal welds
Wagner, Sabine; Dugan, Sandra; Barth, Martin; Schubert, Frank; Köhler, Bernd | Conference Paper |
| 2014 | Wettability of rapid thermal firing silver-pastes
Gierth, Paul; Rebenklau, Lars | Conference Paper |
| 2014 | Wirbelstromprüfvorrichtung, Schaltelement, Wirbelstromprüfverfahren und Verwendung derselben
Joneit, Dieter | Patent |
| 2014 | Wolfram-Dickschichtmetallisierungen im Simultaneinbrand mit Aluminiumnitrid
Joedecke, Christian Bernd
: Michaelis, Alexander | Dissertation |
| 2014 | X-ray microscopy and tomography of hydrogen storage materials
Gluch, J.; Niese, S.; Röntzsch, L.; Zschech, E. | Journal Article |
| 2014 | Zerstörungsfreie Fehlerdetektion in Carbonfaser-Gelegen und CFK mit hochfrequenter Wirbelstrom-Messtechnik
Bardl, G.; Nocke, A.; Cherif, C.; Kupke, R.; Klein, M.; Heuer, H. | Journal Article |
| 2014 | Zukunftspotenziale von Hochleistungskeramiken
: Voigtsberger, Bärbel (Red.); Rossner, Wolfgang (Red.); Lenk, Reinhard (Red.); Klemens, Joachim (Red.) | Study |
| 2014 | Zuverlässigkeitsbetrachtungen für einen direktkonvertierenden Röntgenzeilendetektor und dessen Anwendung als spektroskopisches Dosimeter
Lohse, Thomas
: Heuer, Henning (Gutachter); Krüger, Peter (Betreuer) | Dissertation |
| 2014 | Zuverlässigkeitsbewertung von elektrischen und mechanischen Verbindungen mit dem iQPro-Demonstrator
Metasch, René; Röllig, Mike; Wolter, Klaus-Jürgen; Meyendorf, Norbert | Conference Paper |
| 2014 | |