Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
20194-Amino-1-butyl-1,2,4-triazolium Nitrate - Synthesis and Characterization
Schaller, Uwe; Keicher, Thomas; Weiser, Volker; Hürttlen, Jürgen
Journal Article
20195. Symposium Rohstoffinnovationen und Rohstoffeffizienz 2019
: Teipel, Ulrich; Schweppe, Rainer
Conference Proceedings
2019Application of azide-containing molecules as modifiers of HTPB: Synthesis and evaluation of properties
Lemos, Mauricio Ferrapontoff; Mendes, Luis Claudio; Bohn, Manfred A.; Keicher, Thomas
Journal Article
2019Assessing the structural integrity of carbon-fibre sandwich panels in fire: Bench-scale approach
Schartel, B.; Humphrey, J.K.; Gibson, A.G.; Hörold, A.; Trappe, V.; Gettwert, Volker
Journal Article
2019Aufbau eines Versuchstandes zur Validierung der Strömungssimulation eines otto-motorischen Kühlkonzeptes, welcher nach SLM-Richtlinien entwickelt ist
Abdelkefi, Mahdi
: Maliha, Maliki (Betreuer); Michler, Tobias (Betreuer)
Master Thesis
2019Aufbau und Inbetriebnahme der QCM-Messanlage als Screeningtool für die Adsorptionseigenschaften selektiver Materialien
Souvannavong, Naryvone
Bachelor Thesis
2019Beobachtung des Schädigungsverhaltens von Aluminiumkolben unter TMF- und überlagerter TMF/HCF-Belastung
Vogt, Matthias
: Elsner, Peter (Betreuer); Kuhlen, Karl Gerhard
Bachelor Thesis
2019Betauung im Bereich der Umweltsimulation - Ein Beitrag zur Validierung des Normentwurfs [E] DIN EN 60068-2-84
Bott, P.; Schmitt, T.; Cäsar, Joachim
Conference Paper
2019Cathode plasma electrolysis in diluted potassium hydroxide solutions: Particles formation and energetic estimation
Gromov, Alexander; Nalivaiko, Anton; Fehn, Thomas; Yahya, Dewi Puspa Muhammad; Osipenkova, Alexandra; Koleczko, Andreas; Knapp, Sebastian; Teipel, Ulrich
Journal Article
2019Chemical Kinetics of the Oxidation of Manganese and of the Decomposition of MnO2 by XRD and TG Measurements
Kelzenberg, Stefan; Eisenreich, Norbert; Knapp, Sebastian; Koleczko, Andrzej; Schuppler, Heike; Fietzek, Harald
Journal Article
2019Comprehensive determination of heat generation and thermal modelling of a hybrid capacitor
Miller, Martin; Baltes, Norman; Rabenecker, Peter; Hagen, Marcus; Tübke, Jens
Journal Article
2019The Connection Between the Parameters of WLF Equation and of Arrhenius Equation
Bohn, Manfred
Journal Article
2019Continuous Flow Desulfurization of a Model Fuel Catalysed by Titanium Functionalized UiO‐66
Piscopo, Calogero Giancarlo; Voellinger, L.; Schwarzer, Maud; Polyzoidis, Angelos; Bošković, Dusan; Löbbecke, Stefan
Journal Article
2019A coupled thermomechanical approach for finite element forming simulation of continuously fiber-reinforced semi-crystalline thermoplastics
Dörr, Dominik; Joppich, Tobias; Kugele, Daniel; Henning, Frank; Kärger, Luise
Journal Article
2019Customized Design of Scalable Microfluidic Droplet Generators Using Step-Emulsification Methods
Eberhardt, Angelika; Boskovic, Dusan; Löbbecke, Stefan; Panic, Slobodan; Winter, Yannik
Journal Article, Conference Paper
2019Designverifikation eines hochausgenutzten Elektromotors mit innenliegender Kühlung und duroplastischem Leichtbaugehäuse
Suppanz, Joseph
: Dollinger, Andreas; Jux, Benedict (Betreuer); Langheck, Andreas (Betreuer)
Master Thesis
2019Development of a property forecast tool for flexible compositions of Li-ion batteries, including raw material availability and price forming
Krsmanovic, Dejana
: Hagen, M.; Brant, W.; Munkhammar, J.
Master Thesis
2019Digitale Zwillinge
Cäsar, Joachim
Conference Paper
2019Dithiocyanurates and thiocyamelurates: Thermal thiyl radical generators as flame retardants in polypropylene
Höhne, Carl-Christoph; Posern, C.; Böhme, U.; Eichler, F.; Kroke, E.
Journal Article
2019Durchgangswiderstand von Staubschüttungen - Messverfahren und Einflussgrößen
Teipel, Ulrich; Wolf, Sebastian; Schreiber, Alex
Conference Paper
2019Electrochemical stability of silica-templated polyaniline-derived mesoporous N-doped carbons for the design of Pt-based oxygen reduction reaction catalysts
Melke, Julia; Schuster, Robin; Möbus, Sascha; Jurzinsky, Tilman; Elsässer, Patrick; Heilemann, Axel; Fischer, Anna
Journal Article
2019Emission Spectroscopy of the Combustion Flame of Aluminium/Copper Oxide Thermite
Knapp, Sebastian; Kelzenberg, Stefan; Raab, Angelika; Roth, Evelin; Weiser, Volker
Journal Article
2019Entwicklung einer RTM Prozessvariante zur kavitätsdruckgeregelten Herstellung von Faserverbundstrukturbauteilen
Rosenberg, Philipp
Dissertation
2019Environment-Friendly Composite Propellants Based on Ammonium Dinitramide
Gettwert, Volker; Weiser, Volker; Tagliabue, Claudio; Hafner, Sven; Fischer, Sebastian
Journal Article
2019Environmental factors and their impact on the transition, safety and function of selected processes, systems and products
Schmid, Helmut
Conference Paper
2019Experimental and numerical study of the spring-in of angled brackets manufactured using different resins and fiber textiles
Bernath, A.; Groh, F.; Exner, W.; Hühne, C.; Henning, F.
Journal Article
2019An experimental and numerical survey into the potential of hybrid foams
Hohe, Jörg; Beckmann, Carla; Böhme, Wolfgang; Weise, Jörg; Reinfried, Matthias; Luthardt, Fabian; Rapp, Florian; Diemert, Jan
Journal Article
2019Failure mode maps for four-point-bending of hybrid sandwich structures with carbon fiber reinforced plastic face sheets and aluminum foam cores manufactured by a polyurethane spraying process
Rupp, P.; Elsner, P.; Weidenmann, K.A.
Journal Article
2019Fast processing and continuous simulation of automotive structural composite components
Henning, F.; Kärger, L.; Dörr, D.; Schirmaier, F.J.; Seuffert, J.; Bernath, A.
Journal Article
2019Fractionation of three different lignins by thermal separation techniques
Rohde, Viktoria; Böringer, Sarah; Tübke, Beatrice; Adam, Christian; Dahmen, Nicolaus; Schmiedl, Detlef
Journal Article
2019Fraunhofer-Institut für Chemische Technologie. Jahresbericht 2018/2019
 
Annual Report
2019Functionalization of multi-walled carbon nanotubes with indazole
Jurzinsky, T.; Gomez-Villa, E.D.; Kübler, M.; Bruns, M.; Elsässer, P.; Melke, J.; Scheiba, F.; Cremers, C.
Journal Article
2019Grundlagen und Verfahren zur profilierten Erwärmung von PET-Preforms mit Mikrowellen
Graf, Matthias Harald
: Elsner, P.; Jelonnek, J.
Dissertation
2019Igniter Compositions for Lova and Double-Base Propellants Containing
Weiser, Volker; Kelzenberg, Stefan; Knapp, Sebastian; Koleczko, Andreas; Roth, Evelin
Journal Article
2019Improving the Processability of Graphene Nanoplatelets in Polyamide 6 during Melt Compounding Extrusion
Blanco-Villalba, José Francisco; Recio, Imanol; Gómez-Cordón, Julio; Hübner, Christof
Conference Paper
2019Influence of glyoxal on curing of urea-formaldehyde resins
Perminova, D.A.; Malkov, V.S.; Gusсhin, V.; Eisenreich, N.
Journal Article
2019Injection molding simulation of short fiber reinforced thermosets with anisotropic and non-Newtonian flow behavior
Wittemann, Florian; Märtens, Robert; Kärger, Luise; Henning, Frank
Journal Article
2019Die Integration von Fragestellungen der Circular Economy in die Ökobilanzierung
Dieterle, Michael; Viere, Tobias
Book Article
2019Interpreting LCA results from a life cycle and circular economy perspective: Application of the life cycle gap-analysis
Dieterle, Michael; Viere, Tobias
Abstract
2019Investigation of Crystallisation Conditions to Produce CL-20/HMX Cocrystal for Polymer-bonded Explosives
Herrmannsdörfer, Dirk; Gerber, Peter; Heintz, Thomas; Herrmann, Michael; Klapötke, Thomas
Journal Article
2019Kombination von Sheet und Bulk Molding Compound in Jutefaserverbunden
Lautenschläger, Miriam Isabell
: Elsner, P.; Büter, A.; Weidenmann, K.A.
Dissertation
2019A machine learning assisted approach for textile formability assessment and design improvement of composite components
Zimmerling, Clemens; Dörr, Dominik; Henning, Frank; Kärger, Luise
Journal Article
2019Makroskopische Reibwertsteuerung durch elektrochemische Potentiale mit ionischen Flüssigkeiten
Gatti, F.; Amann, T.; Kailer, A.; Abicht, J.; Rabenecker, P.; Baltes, N.; Rühe, J.
Journal Article
2019Maßnahmen zur Reduktion der Ausschussquote bei der Produktion von Lithium-Ionen Zellen
Hilger, Celine
: Franke, D.; Meilinger, S.; Hagen, M.
Bachelor Thesis
2019Mechanical properties of foamed long glass fiber reinforced polyphenylene sulfide integral sandwich structures manufactured by direct thermoplastic foam injection molding
Lohr, C.; Beck, B.; Henning, Frank; Weidenmann, K.A.; Elsner, Peter
Journal Article
2019Modelling of Al/MnO2 and Ti/MnO2 Thermite Mixtures
Knapp, Sebastian; Eisenreich, Norbert; Kelzenberg, Stefan; Roth, Evelin; Weiser, Volker
Journal Article
2019Modular Thinking. Development of a Production Plant for Hybrid Fiber Composite Components
Kilian, Sascha; Joppich, Tobias
Journal Article
2019Der modulare Gedanke. Entwicklung einer Anlage für die Produktion hybrider Faserverbund-Bauteile
Joppich, Tobias; Kilian, Sascha
Journal Article
2019Molecularly Imprinted Sol-Gel for TNT Detection with Optical Micro-Ring Resonator Sensor Chips
Eisner, Ludmila; Wilhelm, Isabel; Flachenecker, Günter; Hürttlen, Jürgen; Schade, Wolfgang
Journal Article
2019New Approach for the Efficient Attainment of Flame Retardancy Using Multi Component Injection Molding
Schneider, Dorothea; Hübner, Christof; Bourbigot, Serge
Conference Paper
2019Numerical modeling of a hybrid forming process for three-dimensionally curved fiber-metal laminates
Werner, Henrik O.; Dörr, Dominik; Henning, Frank; Kärger, Luise
Conference Paper
2019On the effect of electric field application during the curing process on the electrical conductivity of single-walled carbon nanotubes–epoxy composites
Morais, Manuel V.C.; Oliva-Aviles, A.I.; Matos, M.A.S.; Tagarielli, V.L.; Pinho, S.T.; Hübner, Christof; Henning, Frank
Journal Article
2019On the relevance of thermomechanics and crystallization kinetics for FE thermoforming simulation of semi-crystalline thermoplastic tapes
Dörr, Dominik; Kugele, Daniel; Joppich, Tobias; Henning, Frank; Kärger, Luise
Conference Paper
2019Optimierung eines säure-katalysierten Ethanol-Wasser Organosolv-Prozesses für die Biomassen Pappel mit Rinde und Miscanthus G. in Hinblick auf Ligninfraktionierung und -funktionalisierung
Rohde, Viktoria
: Dahmen, N.; Syldatk, C.
Dissertation
2019PEM‐Fuel Cell Catalyst Behavior between Room Temperature and Freezing Point
Kunkel, Robin; Baumann, Nils; Jurzinsky, Till; Cremers, Carsten
Journal Article
2019Progress in Additive Manufacturing of Energetic Materials: Creating the Reactive Microstructures with High Potential of Applications
Muravyev, N.V.; Monogarov, K.A.; Schaller, Uwe; Fomenkov, I.V.; Pivkina, A.N.
Journal Article
2019Properties and Structure of ADN-Prills
Heintz, Thomas; Herrmann, Michael
Journal Article
2019Prozess-Struktur-Eigenschafts-Beziehungen hybrider Polymer-Metall-Verbundstrukturen aus dem Spritzgießprozess
Schwarz, Angela
Master Thesis
2019Recycled Poly(Ethylene Terephthalate)/Clay Nanocomposites
Chowreddy, R.R.; Nord-Varhaug, K.; Rapp, F.
Journal Article
2019Segmented Printed Circuit Board Electrode for Locally-Resolved Current Density Measurements in All-Vanadium Redox Flow Batteries
Gerber, Tobias; Fischer, Peter; Pinkwart, Karsten; Tübke, Jens
Journal Article
2019Separation of volatile fatty acids from biogas plant hydrolysates
Jänisch, Thorsten; Reinhardt, Sebastian; Pohsner, Ute; Böringer, Sarah; Bolduan, R.; Steinbrenner, J.; Oechsner, H.
Journal Article
2019Simulation of Damage Characteristics
Fischer, C.; Mittag, S.; Kuhlen, K.; Schweizer, C; Seifert, T.; Dittrich, R.; Kollmeier, H.-P.
Report
2019Simulieren, aber richtig! Das Problem der reversiblen Wasseraufnahme bei Waterborne-Beschichtungen
Becker, Wolfgang; Cäsar, Joachim; Knapp, Sebastian; Koleczko, Andreas; Schmid, Helmut
Conference Paper
2019Specific bending stiffness of in-mould-assembled hybrid sandwich structures with carbon fibre reinforced polymer face sheets and aluminium foam cores manufactured by a polyurethane-spraying process
Rupp, P.; Elsner, P.; Weidenmann, K.A.
Journal Article
2019Supercritical water as reaction media
Jänisch, Thorsten
Presentation
2019Thermal Characterization of Naturally Aged Propellants
Heil, Moritz; Hickmann, Jürgen; Müller, Christian
Journal Article
2019Thermites - Versatile Materials
Koch, Ernst‐Christian; Knapp, Sebastian
Journal Article
2019UV/VIS Spektroskopie zur kontinuierlichen Bestimmung des Ladezustandes eines Vanadium Redox Flow Batterie
Winter, Christoph
Master Thesis
2019Vanadium electrolyte for all-vanadium redox-flow batteries: The effect of the counter ion
Roznyatovskaya, Nataliya; Noack, Jens; Mild, Heiko; Fühl, Matthias; Fischer, Peter; Pinkwart, Karsten; Tübke, Jens; Skyllas-Kazacos, Maria
Journal Article
2019Vanadium Oxygen Fuel Cell Utilising High Concentration Electrolyte
Risbud, Mandar; Menictas, Chris; Skyllas-Kazacos, Maria; Noack, Jens
Journal Article
2019Virtual process chain of sheet molding compound: Development, validation and perspectives
Görthofer, J.; Meyer, N.; Pallicity, T.D.; Schöttl, L.; Trauth, A.; Schemmann, M.; Hohberg, M.; Pinter, P.; Elsner, Peter; Henning, Frank; Hrymak, A.; Seelig, T.; Weidenmann, K.; Kärger, L.; Böhlke, T.
Journal Article
2019Weiterentwicklung einer Methodik zur rheologischen Untersuchung von schnellhärtenden Epoxidharzen
Dietrich, Philipp
: Henning, Fraunk (Betreuer); Hüttl, Julian (Projektleiter)
Bachelor Thesis
2018A 2D modeling approach for fluid propagation during FE-forming simulation of continuously reinforced composites in wet compression moulding
Poppe, C.; Dörr, D.; Henning, F.; Kärger, L.
Conference Paper
2018Accelerated ageing and hydrolytic stabilization of poly(lactic acid) (PLA) under humidity and temperature conditioning
Porfyris, A.; Vasilakos, S.; Zotiadis, C.; Papaspyrides, C.; Moser, K.; Schueren, L. van der; Buyle, G.; Pavlidou, S.; Vouyiouka, S.
Journal Article
2018Accurate description of the ageing of energetic materials
Heil, Moritz
Conference Paper
2018Airbag 2018, 14th International Symposium and Accompanying Exhibition on Sophisticated Car Occupant Safety Systems
 
Conference Proceedings
2018Almost inseparable. Strong adhesion in metal-polymer compounds due to nanoporous adhesive layer
Emmerich, Rudolf; Laux, Marcel; Dreher, Ralf
Journal Article
2018Ap-free composite propellants as reclament for AP/HTPB/AL
Tagliabue, Claudio; Fischer, Sebastian; Gettwert, Volker; Weiser, Volker
Conference Paper
2018Beinahe unzertrennlich. Hohe Festigkeit durch nanoporöse Haftschicht für Metall-Kunststoff-Verbunde
Emmerich, Rudolf; Laux, Marcel; Dreher, Ralf
Journal Article
2018Beobachtung des Schädigungsverhaltens von Zylinderkopfproben bei TMF-Belastung
Cömertpay, Hatem
: Koch, Thomas (Betreuer); Kuhlen, Gerhard (Betreuer)
Master Thesis
2018Binder crystal adhesion measured in macro HMX/HTPB-composites
Kronis-Rudigier, Gunnar; Herrmann, Michael
Conference Paper
2018Burning behaviour of ADN solid propellants in comparison to other oxidizers
Imiolek, Andreas; Weiser, Volker; Locatelli, Francesco; Tagliabue, Claudio; Gettwert, Volker; Bieroth, Diana
Conference Paper
2018Burning behaviour of energetic ionic liquids investigated with-4-amino-1-methyl-1,2,4-triazolumnitrat
Weiser, Volker; Schaller, Uwe
Conference Paper
2018Camphor coated powders investigated by imaging spectroscopy
Pontius, Heike; Dörich, Manuela; Heil, Moritz
Conference Paper
2018Characterisation of particle mixtures by nano computer tomography
Knapp, Sebastian; Koleczko, Andreas; Kröber, Hartmut
Conference Paper
2018Characterization of gun propellants containing bateg
Böhnlein-Mauß, Jutta; Mitró, Daniel; Keicher, Thomas
Conference Paper
2018Characterization of polyester-based polyurethane elastomers plasticized with energetic ionic liquids
Lemos, Mauricio Ferrapontoff; Bohn, Manfred A.; Schaller, Uwe
Conference Paper
2018Charakterisierung der Einflussparameter für das Verarbeiten von PA6 Hybridrovings im Wickelverfahren für endlosglasfaserverstärkte Spritzgussbauteile
Becker, Jerome
Master Thesis
2018Chemical Recycling of post-consumer Mattress Materials
Yogish, Savina Padumane
Master Thesis
2018Comminution of energetic materials in viscous binder components with high solid loadings
Dresel Alexander; Gerber, Peter; Roßmann, Christian; Heintz, Thomas
Conference Paper
2018The connection between WLF equation and Arrhenius equation
Bohn, Manfred A.
Conference Paper
2018Copolymers based on GAP and 1,2‐Epoxyhexane as Promising Prepolymers for Energetic Binder Systems
Hafner, S.; Keicher, T.; Klapötke, T.M.
Journal Article
2018Corrossion behaviour of aluminide diffusion coatings on ferritic steel in molten Solar Salt
Weick, Sarah
Master Thesis
2018D 6.8 PEDR Plan for the Exploitation and Dissemination of Results. Final Report
Lagioia, Rocco
: Müller, Torsten; Forte, Federica; Araujo, Blanca; Yurramendi, Lourdes; Sgarioto, Rocca; García, Jose Manuel
Report
2018D 7.2 Second Progress Report Part A
Rodriguez, Alicia; Araujo, Blanca; González, Manuel; Maroto, Jose Antonio; Val, Diego; García, Jose Manuel; Müller, Torsten; Lagioia, Rocco
Report
2018D 7.3 Third Progress Report
Rodriguez, Alicia; Araujo, Blanca; González, Manuel; Maroto, Jose Antonio; Müller, Torsten; Val, Diego; García, Jose Manuel; Lagioia, Rocco
Report
2018Decolorization of plastics by extraction of pigments with supercritical CO2
Jänisch, Thorsten; Unser, Steffen
Poster
2018DEMS and online mass spectrometry studies of the carbon support corrosion under various polymer electrolyte membrane fuel cell operating conditions
Cremers, Carsten; Jurzinsky, Tilman; Meier, Jan; Schade, A.; Branghofer, Marco; Pinkwart, Karsten; Tübke, Jens
Journal Article
2018Development of electrolytes for lithium-sulfur batteries with focus on electrochemical and electrolyte decomposition analyses
Nave, Eran
Master Thesis
2018Development of full carbon wheels for sport cars with high-volume technology
Rondina, Francesco; Taddia, Sara; Mazzocchetti, Laura; Donati, Lorenzo; Minak, Giangiacomo; Rosenberg, Philipp; Bedeschi, Andrea; Dolcini, Enrico
Journal Article
2018DMA of polyester-based polyurethane elastomers for composite rocket propellants containing different energetic plasticizers
Lemos, M.F.; Bohn, M.A.
Journal Article
2018Effect of HMX distribution and plasticizer content variations on the DMA loss factor of HTPB-IPDI binder
Bohn, Manfred A.; Gerber, Peter; Heintz, Thomas; Herrmann, Michael
Conference Paper
2018The Effect of Nonlinearity on Determined Parameters of Gun Propellant Burn Rate Models
Wurster, S.
Journal Article
2018Einleuchtende Idee. Fraunhofer ICT verarbeitet leitfähiges Material in der additiven Fertigung
Hübner, Christof
Journal Article
2018Electrolyte decomposition and electrode thickness changes in Li-S cells with lithium metal anodes, prelithiated silicon anodes and hard carbon anodes
Hancock, K.; Becherer, J.; Hagen, M.; Joos, M.; Abert, M.; Müller, D.; Franz, P.; Straach, S.; Tübke, J.
Journal Article
2018Entwicklung einer neuartigen Verarbeitungstechnologie zur universellen Umformung von endlosfaserverstärkten thermoplastischen Hohlprofilen
Liyang, Hong
Master Thesis
2018Entwicklung eines additiv gefertigten Kurbelgehäuses für einen Einzylinder Rennmotor
Hirzler, Ingo
Master Thesis
2018Entwicklung eines Reglers für die Austrittstemperatur von Wirbelrohren
Brantin, Alexej
Bachelor Thesis
2018Evaluation of an Integral Injection Molded Housing for High Power Density Synchronous Machines with Concentrated Single-Tooth Winding
Langheck, Andreas; Reuter, Steffen; Saburow, Oleg; Märtens, Robert; Wittemann, Florian; Berg, Lars Frederik; Doppelbauer, Martin
Conference Paper
2018Experimental and numerical investigation of the shear behaviour of infiltrated woven fabrics
Poppe, C.; Dörr, D.; Henning, F.; Kärger, L.
Journal Article
2018Experimental calibration of manganin pressure gauges
Wurster, Sebastian; Schrabback, M.; Leibold, Marvin
Conference Paper
2018Fertigung ionisch leitender Membranen für den Einsatz in Festkörperbatterien
Theil, Patrik André
: Doppelbauer, Martin; Tübke, Jens (Betreuer); Ahlbrecht, Katharina (Betreuer)
Master Thesis
2018Foam injection molding of glass fiber reinforced polypropylene composites with laminate skins
Kasemphaibulsuk, P.; Holzner, M.; Kuboki, T.; Hrymak, A.
Journal Article
2018Following isocyanate-polyol curing by volume shrinkage induced pressure decrease - considering reaction volume, activation volume, compressibility and diffusion control
Bohn, Manfred A.
Conference Paper
2018Formation of ADN-prills in microfluidic droplet generators
Radulescu, Ligia; Eberhardt, Angelika; Boskovic, D.
Conference Paper
2018Fraunhofer-Institut für Chemische Technologie. Jahresbericht 2017/2018
 
Annual Report
2018Fuel Flexible, Near Zero Emissions, Adaptive Performance Marine Engine
: Kuhle, Karl Gerhard
Report
2018Gasanalytik, Schichtdickenmessungen und Stabilitätsuntersuchungen an kostengünstigen Elektroden für stationäre Energiespeicher
Petit, Jan
: Tübke, Jens (Betreuer); Pfeifer, Peter (Gutachter); Hagen, Marcus (Betreuer)
Master Thesis
2018High temperature molten salt corrosion behavior of aluminide and nickel-aluminide coatings for heat storage in concentrated solar power plants
Audigié, P.; Encinas-Sánchez, V.; Juez-Lorenzo, M.; Rodríguez, S.; Gutiérrez, M.; Pérez, F.J.; Agüero, A.
Journal Article
2018Illuminating Idea. Fraunhofer ICT processes conductive material in additive manufacturing
Hübner, Christof
Journal Article
2018Impact of carbon support functionalization on the electrochemical stability of Pt fuel cell catalysts
Schmies, H.; Hornberger, E.; Anke, B.; Jurzinsky, T.; Nong, H.N.; Dionigi, F.; Kühl, S.; Drnec, J.; Lerch, M.; Cremers, C.; Strasser, P.
Journal Article
2018Inbetriebnahme eines Prüfstands zur Bestimmung des Einflusses von kombinierter TMF/HCF-Belastung auf die Lebensdauer von Aluminiumkolben
Koleczko, Rubens
Bachelor Thesis
2018Influence of ADN/Nitramine Mixtures on the Burning Behaviour of Composite Propellants with Inert and Energetic Binders
Locatelli, Francesco
Master Thesis
2018The influence of electrochemical treatment on electrode reactions for vanadium redox-flow batteries
Noack, J.; Roznyatovskaya, N.; Kunzendorf, J.; Skyllas-Kazacos, M.; Menictas, C.; Tübke, J.
Journal Article
2018Internal plasticized glycidyl azide polyethers for solid propellant binders
Hafner, Sven; Keicher, Thomas
Conference Paper
2018Intrinsic flame resistance of polyurethane flexible foams: Unexpectedly low flammability without any flame retardant
Höhne, Carl-Christoph; Hanich, Ronny; Kroke, Edwin
Journal Article
2018Inverse Gaschromatographie Untersuchungen für Alkane, Alkohole, Aromaten und Nitroverbindungen zur Charakterisierung eines selektiven Multiadsorbers
Schuster, Martina
: Flick, Klemens (Betreuer); Wittek, Michael (Betreuer)
Master Thesis
2018Klär- und Abwasseraufbereitung: Membrantechnologien und Hydrothermale Carbonisierung (HTC) inkl. Prozesswasseraufbereitung
Jänisch, Thorsten
Presentation
2018Life cycle assessment: A tool to eco-design structural composite parts
Reichert, T.; Salles, A.
Conference Paper
2018Life cycle gaps: Interpreting LCA results with a circular economy mindset
Dieterle, Michael; Schäfer, Philipp; Viere, Tobias
Journal Article, Conference Paper
2018Locally continuous-fiber reinforced sheet molding compound
Bücheler, David
: Henning, F.; Osswald, T.A.; Weidenmann, K.A.; Möslang, A.
Dissertation
2018Long-term behaviour of Nb and Cr nitrides nanostructured coatings under steam at 650 °C
Agüero, Alina; Juez-Lorenzo, Maria; Hovsepian, Papken; Ehiasarian, Arutiun Papken; Purandare, Yashodhan; Muelas, Raúl
Journal Article
2018Makroskopische Reibwertsteuerung durch elektrochemische Potentiale mit ionischen Flüssigkeiten
Gatti, F.; Amann, T.; Kailer, A.; Rabenecker, P.; Baltes, N.; Rühe, J.
Conference Paper
2018Mass flow determination of airbag inflators
Yurrita, Pedro; Klahn, Thorsten; Neutz, Jochen; Edelmann, Nico
Conference Paper
2018Material- und Verfahrensentwicklung zur industriellen Umsetzung großflächiger endlosfaserverstärkter Bauteile aus aPA6 - am Beispiel von 2D-Flechtbauteilen
Pfister, Sandra Kathrin
Dissertation
2018MD simulation of HMX rupture under tensile stress
Nardai, Michael M.; Bohn, Manfred A.
Conference Paper
2018Messtechnische Erfassung und Auswertung eines thermischen Solarkollektorfeldes
Glastetter, Anton
Bachelor Thesis
2018A meta-model based approach for rapid formability estimation of continuous fibre reinforced components
Zimmerling, C.; Dörr, D.; Henning, F.; Kärger, L.
Conference Paper
2018Methanol oxidation reaction on core-shell structured Ruthenium-Palladium nanoparticles: Relationship between structure and electrochemical behavior
Kübler, M.; Jurzinsky, T.; Ziegenbalg, D.; Cremers, C.
Journal Article
2018Microstructure and Thermal Behavior of ADN-Prills investigated by means of X-ray Diffraction. Pt.II
Herrmann, Michael; Förter-Barth, Ulrich; Kempa, Bernd; Heintz, Thomas
Conference Paper
2018Modellierung und Simulation eines Pufferbehälters mit Luftumwälzung zur Durchmischung einer Sprengstoff-Wasser Suspension mit OpenFOAM
Schmähl, Florian
Master Thesis
2018Modellierung, Simulation und Charakterisierung des Abbrandes extrudierbarer Festtreibstoffe mit komplexer Querschnittgeometrie
Wurster, Sebastian
: Elsner, Peter; Teipel, Ulrich
Dissertation
2018Modelling approach for anisotropic inter-ply slippage in finite element forming simulation of thermoplastic UD-tapes
Dörr, Dominik; Faisst, Markus; Joppich, Tobias; Poppe, Christian; Henning, Frank; Kärger, Luise
Conference Paper
2018Molecular dynamics simulation of tensile tests at a curved binder-particle interface
Nardai, Michael M.; Bohn, Manfred A.
Conference Paper
2018Molecularly imprinted polymers for detection of explosives In gas phase approach for the detection of TNT in cargo containers
Heil, Moritz
Conference Paper
2018Multi-objective patch optimization with integrated kinematic draping simulation for continuous-discontinuous fiber-reinforced composite structures
Fengler, Benedikt; Kärger, Luise; Henning, Frank; Hrymak, Andrew
Journal Article
2018Nanomaterialien für elektrische Energiespeicher
Calgar, Burak; Fischer, Peter; Hagen, Markus; Tübke, Jens; Althues, Holger; Dörfler, Susanne; Guntow, Uwe; Schulz, Jochen; Endler, Ingolf; Fritsch, Marco; Meißner, Frank; Wolter, Mareike
Book Article
2018A new algorithm to determine geometric properties of propellant grains from computer tomographic images
Wurster, Sebastian; Sprengel, David
Conference Paper
2018New battery technologies for electric vehicles - What will we see on the road?
Tübke, J.
Conference Paper
2018Nir-flare compositions basing on hot water band emission
Roth, Evelin; Weiser, Volker; Lity, Andre; Raab, Angelika; Kelzenberg, Stefan
Conference Paper
2018Nonlinear hyperviscoelastic modelling of intra-ply deformation behaviour in finite element forming simulation of continuously fibre-reinforced thermoplastics
Dörr, D.; Henning, F.; Kärger, L.
Journal Article
2018A novel differential electrochemical mass spectrometry method to determine the product distribution from parasitic Methanol oxidation reaction on oxygen reduction reaction catalysts
Jurzinsky, T.; Kurzhals, P.; Cremers, C.
Journal Article
2018Novel N-phosphorylated iminophosphoranes based on 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide
Weinert, Michael; Fuhr, Olaf; Döring, Manfred
Journal Article
2018Numerical and experimental investigation of manufacturing and performance of metal inserts embedded in CFRP
Muth, M.; Schwennen, J.; Bernath, A.; Seuffert, J.; Weidenmann, K.A.; Fleischer, J.; Henning, F.
Journal Article
2018Numerische Modellierung einer selbsterhaltenden Hochtemperatursynthese von nano-strukturierten Bor-Partikeln
Heger, Patrick
: Pietsch, Erik (Betreuer); Teipel, Ulrich (Erstkorrektor); Ranong, Chakkrit (Zweitkorrektor)
Master Thesis
2018Ölverbrauchsmessung an einem Abgasturbolader mit einem Flammenionisationsdetektor am Heißgasprüfstand
Dietrich, Simon
Bachelor Thesis
2018On the scale-up of metal-organic frameworks using microreaction technology
Polyzoidis, Angelos
Dissertation
2018Optical properties of filled polymeric composite materials from near infrared spectroscopy
Becker, Wolfgang; Sachsenheimer, K.; Roth, Evelin; Knapp, Sebastian; Weiser, Volker
Conference Paper
2018Optimierte Emulsions- und Partikelerzeugung in mikrofluidischen Strukturen
Winter, Yannik
Master Thesis
2018Optimization of the biogas process by delignification of the feed and separation of volatile fatty acids during the process
Jänisch, Thorsten
Presentation
2018Oxidation of manganese and decomposition of MnO2
Kelzenberg, Stefan; Eisenreich, Norbert; Knapp, Sebastian; Koleczko, Andreas; Schuppler, Heike
Conference Paper
2018Partikeltechnologie
Teipel, U.; Türk, M.
Journal Article
2018Polymerbasierte Nanokomposite
Diemert, Jan; Hübner, Christof; Hartwig, Andreas; Laschewsky, Andre
Book Article
2018Preconcentration of Nitroalkanes with Archetype Metal–Organic Frameworks (MOFs) as Concept for a Sensitive Sensing of Explosives in the Gas Phase
Rieger, M.; Wittek, M.; Scherer, P.; Löbbecke, S.; Müller-Buschbaum, K.
Journal Article
2018Principles of ageing of double base propellants and its assessment by several methods following propellant properties
Bohn, Manfred A.
Conference Paper
2018Process comparison on the microstructure and mechanical properties of fiber-reinforced polyphenylene sulfide using MuCell technology
Lohr, C.; Beck, B.; Henning, F.; Weidenmann, K.A.; Elsner, P.
Journal Article
2018Product design of ADN-PRILLS for applications in solid propellants
Heintz, Thomas; Leisinger, Karlfred; Reinhardt, Werner; Heil, Moritz; Herrmann, Michael
Conference Paper
2018Prozesstechnik zur Altholzaufbereitung
Eisenlauer, M.; Graf, H.; Teipel, U.
Journal Article
2018Rare earths and the balance problem: How to deal with changing markets?
Binnemans, Koen; Jones, Peter Tom; Müller, Torsten; Yurramendi, Lourdes
Journal Article
2018Reaction between azide molecule with hydroxyl terminated polybutadiene
Ferrapontoff Lemos, Mauricio; Dörich, Manuela; Keicher, Thomas; Bohn, Manfred A.; Mendes, C.
Conference Paper
2018Recycled polyethylene terephthalate/carbon nanotube composites with improved processability and performance
Chowreddy, Ravindra Reddy; Nord-Varhaug, Katrin; Rapp, Florian
Journal Article
2018Redox-Flow-Zelle und Verfahren zu deren Herstellung
Noack, Jens; Pinkwart, Karsten; Rumpel, Georg; Tübke, Jens
Patent
2018Reducing load in air transportation
Joppich, Tobias; Menrath, Andreas; Wippo, Verena; Baumgärtner, Sebastian; Huber, Timo
Journal Article
2018A review of electrolyte additives and impurities in vanadium redox flow batteries
Cao, L.; Skyllas-Kazacos, M.; Menictas, C.; Noack, J.
Journal Article
2018Rheological studies on gas-laden and long glass fiber reinforced polypropylene through an inline high pressure capillary rheometer in the injection molding process
Lohr, C.; Dieterle, S.; Menrath, A.; Weidenmann, K.A.; Elsner, P.
Journal Article
2018Risikoanalyse und Entwicklung eines Sicherheitskonzeptes für eine Hochdruckversuchsanlage zur Abbrandcharakterisierung von Raketenfesttreibstoffen
Wachter, Laura
Master Thesis
2018Sensitivity reduction of the CL-20/HMX cocrystal via advanced crystallization process
Herrmannsdörfer, Dirk; Herrmann, Michael; Heintz, Thomas
Conference Paper
2018Separation of volatile fatty acids (VFA) formed during the biogas process - OPTIGÄR
Jänisch, Thorsten
Presentation
2018Simulation of reinforced reactive injection molding with the finite volume method
Wittemann, Florian; Märtens, Robert; Bernarth, Alexander; Hohberg, Martin; Kärger, Luise; Henning, Frank
Journal Article
2018Steam oxidation of aluminide coatings under high pressure and for long exposures
Boulesteix, C.; Kolarik, V.; Pedraza, F.
Journal Article
2018Studie zur oxidativen Konversion von Lignin zu polyfunktionellen Oligomeren und konstruktive Technikfolgenabschätzung eines entsprechenden Prozessmoduls
Reinhardt, Sebastian
Master Thesis
2018Sulfides and disulfides of s-Triazine: Potential thermal thiyl radical generators
Höhne, C.-C.; Posern, C.; Böhme, U.; Kroke, E.
Journal Article
2018Synthesis of metal-organic frameworks for energetic applications
Piscopo, Calogero Giancarlo; Polyzoidis, Angelos; Schwarzer, M.; Boskovic, D.; Löbbecke, Stefan
Conference Paper
2018Tensile test of HMX/HTPB macro-composites
Herrmann, Michael; Kronis-Rudigier, Gunnar
Conference Paper
2018Testtailoring
Cäsar, Joachim
Conference Paper
2018Theoretical analysis and experimental investigation of material compatibility between refrigerants and polymers
Eyerer, S.; Eyerer, P.; Eicheldinger, M.; Tübke, B.; Wieland, C.; Spliethoff, H.
Journal Article
2018Thermal characterization of naturally aged gun and rocket propellants
Heil, Moritz; Hickmann, J.
Conference Paper
2018Titania supported on silica as an efficient catalyst for deep oxidative desulfurization of a model fuel with exceptionally diluted H2O2
Piscopo, C.G.; Tochtermann, J.; Schwarzer, M.; Boskovic, D.; Maggi, R.; Maestri, G.; Loebbecke, S.
Journal Article
2018Untersuchung der Eignung von thermoplastischem Cellulosepropionat zur Aufschäumung im kontinuierlichen Schaumextrusionsprozess
Rapp, Florian
: Elsner, Peter; Altstädt, Volker
Dissertation
2018Untersuchung der Möglichkeiten zur Reibungsreduzierung verbrennungsmotorischer Steuertriebe durch pneumatische Ventilfedern
Hartweg, Matthias
: Gumbsch, P.; Koch, T.
Dissertation
2018Untersuchung und Optimierung einer Eisen-basierten Redox-Flow-Batterie
Wernado, Mike
: Silva, Pedro (Betreuer); Noack, Jens (Betreuer)
Bachelor Thesis
2018Use of supercritical CO2 (scCO2) as extraction agent and reaction solvent
Jänisch, Thorsten
Presentation
2018Verfahren und Vorrichtung zur Herstellung von mit einer Tragstruktur versehenen Polymer-Formteilen
Baumgärtner, Sebastian; Huber, Timo
Patent
2018Weniger Last beim Lufttransport
Joppich, Tobias; Menrath, Andreas; Wippo, Verena; Baumgärtner, Sebastian; Huber, Timo
Journal Article
2018Wirksame Methoden zur UV-Stabilisierung von Polymer-Oberflächen im Außenbereich
Schmid, Helmut; Becker, Wolfgang; Knapp, Sebastian; Koleczko, Andreas
Conference Paper
2018WITHDRAWN: "Nonlinear hyperviscoelastic modelling of intra-ply deformation behaviour in finite element forming simulation of continuously fibre-reinforced thermoplastics" [Composites Part A: Applied Science and Manufacturing 109 (2018) 585-596]
Dörr, D.; Henning, F.; Kärger, L.
Journal Article
2017ADN-Prills: Particle properties, stability and sensitivity
Heintz, Thomas; Reinhard, Werner; Leisinger, Karlfred; Herrmann, Michael; Heil, Moritz
Conference Paper
2017Advanced molds and methods for the fundamental analysis of process induced interface bonding properties of hybrid, thermoplastic composites
Joppich, T.; Menrath, A.; Henning, F.
Journal Article, Conference Paper
2017Ageing of surface coated powders investigated by imaging spectroscopy
Pontius, Heike; Dörich, Manuela; Heil, Moritz
Conference Paper
2017Aging behavior of ADN solid rocket propellants and their glass-rubber transition characteristics
Bohn, M.A.; Cerri, S.
Book Article
2017Aging of standard and insensitive RDX crystals investigated by means of X-ray diffraction
Herrmann, Michael; Förter-Barth, Ulrich; Bohn, Manfred; Borne, Lionel
Journal Article
2017Ammonium dinitramide/glycidyl azide polymer (ADN/GAP) composite propellants with and without metallic fuels
Gettwert, V.; Franzin, A.; Bohn, M.A.; DeLuca, L.T.; Weiser, V.
Journal Article
2017Anion intercalation into a graphite cathode from various sodium-based electrolyte mixtures for dual-ion battery applications
Aladinli, Sinan; Bordet, François; Ahlbrecht, Katharina; Tübke, Jens; Holzapfel, Michael
Journal Article
2017Application of eco-efficiency analysis to assess three different recycling technologies for carbon fiber reinforced plastics (CFRPs)
Dieterle, M.; Seiler, E.; Viere, T.
Conference Paper
2017Arylthio- and Arylseleno-Substituted s-Heptazines
Posern, Christian; Böhme, Uwe; Wagler, Jörg; Höhne, Carl-Christoph; Kroke, Edwin
Journal Article
2017Aus einem anderen Blickwinkel
Henning, Frank; Thoma, Bernd; Wendel, Rainer; Rosenberg, Philipp; Gresser, Götz; Bauder, Hans-Jürgen; Wolfrum, Jürgen; Caliskan, Metin
Journal Article
2017Aus einem anderen Blickwinkel: ORW-Verfahren ermöglicht multiaxiale lokale Verstärkung für RTM-Strukturbauteile
Henning, Frank; Thoma, Bernd; Wendel, Rainer; Rosenberg, Philipp; Gresser, Götz; Bauder, Hans-Jürgen; Wolfrum, Jürgen; Caliskan, Metin
Journal Article
2017Automatisierung eines Prüfstands zur Validierung von Dichtsystemen für Redox-Flow-Batterien
Ekinci, Ismet
Bachelor Thesis
2017Beitrag zur Konsolidierung von thermoplastischen Hochleistungsfaserverbundwerkstoffen
Baumgärtner, Sebastian
: Henning, F.; Drummer, D.
Dissertation
2017A benchmark study of finite element codes for forming simulation of thermoplastic UD-tapes
Dörr, D.; Brymerski, W.; Ropers, S.; Leutz, D.; Joppich, T.; Kärger, L.; Henning, F.
Journal Article, Conference Paper
2017Burning Behavior of ADN-Based Propellants Loaded with Al-Mg Mechanically Activated Powders
Cristilli, Francesco
Master Thesis
2017Catalytic oxidation of HTC-waste water in super critical H2O
Jänisch, Thorsten; Graf, Jürgen; Tübke, Beatrice; Pohsner, Ute; Böringer, Sarah
Poster
2017Catalytic oxidation of HTC-waste water in supercritical H2O
Jänisch, Thorsten
Conference Paper
2017Chapter 2: Bio-Fiber Thermoset Composites
Rajpurohit, A.; Henning, F.
Book Article
2017Characterization of aging behavior of butacene® based composite propellants by loss factor curves
Seyidoglu, T.; Bohn, M.A.
Journal Article
2017Characterization of gun propellants by long-term mass loss measurements
Heil, Moritz; Wimmer, Ann-Kathrin; Bohn, Manfred A.
Journal Article
2017Characterization of the interlaminar shear strength of fibre metal laminates with reactively processed thermoplastic matrix
Werner, H.; Sönmez, I.; Wendel, Rainer; Weidenmann, K.; Henning, Frank
Conference Paper
2017A comb-like ionomer based on poly(2,6-dimethyl-1,4-phenylene oxide) for the use as anodic binder in anion-exchange membrane direct methanol fuel cells
Jurzinsky, T.; Bär, R.; Heppe, N.; Cremers, C.; Tübke, J.
Journal Article
2017Combustion Behavior of a Metallized ADN/GAP Propellant as a Function of the Aluminum Content and the Binder/Oxidizer Ratio
Imiolek, Andreas; Weiser, Volker; Tagliabue, C.; Gettwert, Volker
Conference Paper
2017Combustion behavior of aluminum particles in ADN/GAP composite propellants
Weiser, Volker; Franzin, Andrea; DeLuca, Luigi; Fischer, Sebastian; Gettwert, Volker; Kelzenberg, Stefan; Knapp, Sebastian; Raab, A.; Roth, Evelin; Eisenreich, Norbert
Book Article
2017Comminution of biogenic materials
Eisenlauer, M.; Teipel, U.
Journal Article
2017Comparison of filler-dependent mechanical properties of jute fiber reinforced sheet and bulk molding compound
Lautenschläger, Miriam
Conference Paper
2017Comparison of kinetics, oxide crystal growth and diffusivities of nano- and micrometer-sized copper particles on oxidation in air
Eisenreich, Norbert; Schulz, Olga; Koleczko, Andreas; Knapp, Sebastian
Journal Article
2017Comparison of methods for generating the CL-20/HMX-cocrystal
Herrmannsdörfer, Dirk; Herrmann, Michael; Heintz, Thomas
Conference Paper
2017Compositional graphitic cathode investigation and structural characterization tests for Na-based dual-ion battery applications using ethylene carbonate:ethyl methyl carbonate-based electrolyte
Aladinli, Sinan; Bordet, François; Ahlbrecht, Katharina; Tübke, Jens; Holzapfel, Michael
Journal Article
2017The connection between WLF equation and the Arrhenius equation
Bohn, Manfred A.
Conference Paper
2017Continuous synthesis of UiO-66 in microreactor: Pursuing the optimum between intensified production and structural properties
Polyzoidis, A.; Schwarzer, M.; Loebbecke, S.; Piscopo, C.G.
Journal Article
2017Correlation of high explosive properties with plate dent test results for different geometries
Schrabback, M.; Materna, Miriam
Conference Paper
2017Corrosion of carbon supports, induced by high-temperature PEMFC operating conditions
Rau, M.; Jung, F.; Cremers, C.; Tübke, J.
Conference Paper
2017D 5.1 LCA for REE and Mg Recovery Technologies
Salles, Ana
: Sgarito, Serena; Forte, Federica; Yurramendi, Lourdes Sarasola
Report
2017D 5.2 Magnesium Recycling LCA
González, Manuel
: Val, Diego; Araujo, Blanca; Rodriguez, Alicia; Maroto, Jose Antonio; Salles, Ana; Müller, Torsten
Report
2017D 6.6 PEDR Plan for the Exploitation and Dissemination of Results Mid Project Report
Lagioia, Rocco
: Müller, Torsten; Araujo, Blanca
Report
2017D1.1 Definition of the starting situation in URBANREC regions
: Hannich, Ronny
Report
2017D2.3. Mg recycling test unit
Val, Diego
: Val, Diego; Rodriguez, Alicia; Araujo, Blanca
Report
2017Darstellung der Eigenschaften von technisch genutztem Balsaholz und daraus resultierende Verwertungsrouten für End-of-Life-Material von Rotorblättern aus Windkraftanlagen.
Sprengel, Lukas
Report
2017Detection of Black Plastics in the Middle Infrared Spectrum (MIR) Using Photon Up-Conversion Technique for Polymer Recycling Purposes
Becker, Wolfgang; Sachsenheimer, K.; Klemenz, Melanie
Journal Article
2017Development and optimization of the alloying process
Rodriguez, Alicia
: Araujo, Blanca; González, Manuel; Maroto, Jose Antonio; Val, Diego; García, Jose Manuel; Müller, Torsten; Lagioia, Rocco
Report
2017Different polymorphic states of Explosives - A problem of trace detection for inkjet-printed samples
Schweikert, Wenka; Ulrich, Christian; Müller, Stefan; Schnürer, Frank
Conference Paper
2017A direct process to reuse dry fiber production waste for recycled carbon fiber bulk molding compounds
Saburow, O.; Huether, J.; Maertens, R.; Trauth, A.; Kechaou, Y.; Henning, F.; Weidenmann, K.A.
Journal Article, Conference Paper
2017Effect of mechanical treatment on properties of zeolites with chabazite structure
Buzimov, A.Y.; Kulkov, S.N.; Eckl, W.; Pappert, S.; Gömze, L.A.; Kurovics, E.; Kocserha, I.; Geber, R.
Conference Paper
2017Eigenschaftsänderungen von Prüfstäuben durch mechanische Beanspruchung
Teipel, Ulrich; Henning, Frank; Cäsar, Markus
Conference Paper
2017Entwicklung einer Methodik zur quantitativen Analyse von mit dem AKF-Verfahren erzeugten Polymertropfen und Anwendung in Parameterstudie
Unger, Nicolas
Master Thesis
2017Entwicklungsperspektiven für Zellformate von Lithium-Ionen-Batterien in der Elektromobilität
Hettesheimer, Tim; Thielmann, Axel; Neef, Christoph; Möller, Kai-Christian; Wolter, Mareike; Lorentz, Vincent; Gepp, Markus; Wenger, Martin; Prill, Torben; Zausch, Jochen; Kitzler, Peter; Montnacher, Joachim; Miller, Martin; Hagen, Markus; Fanz, Patrik; Tübke, Jens
Study
2017Evaluation of ballistic modifier for aluminized ADN/PSAN propellants
Tagliabue, C.; Imiolek, A.; Gettwert, V.; Weiser, V.
Conference Paper
2017Evaluation of concentration, type and particle size of fillers on the dynamic mechanical behaviour of elastomeric HTPB binder
Bohn, Manfred A.; Lemos, Mauricio Ferrapontoff; Mußbach, Günter
Conference Paper
2017Evaluation of filler effects on the dynamic mechanical behavior of HTPB-elastomer used as binder in exemplary composite formulations
Lemos, M.F.; Mussbach, G.; Bohn, M.A.
Journal Article
2017Evaluation of the James Initiation Criterion in the 21mm and 50mm PMMA Gap Test
Wurster, S.
Journal Article
2017Experimentelle Charakterisierung von Designvarianten überlappend gefügter Kohlenstofffaserverbundstrukturen im Kontext der Entwicklung neuartiger Drapiertechnologien
Fürst, Tobias
: Henning, F.; Mitschang, P.
Dissertation
2017Flexible und dichte keramische Verbundseparatoren für Na-S-Mitteltemperaturzellen
Ahlbrecht, Katharina
: Hoffmann, M.J.; Tübke, J.
Dissertation
2017Following the curing of isocyanate-polyol by pressure decrease - influences of activation volume, reaction volume and change in bulk compressibility as well as diffusion control during curing
Bohn, Manfred A.
Conference Paper
2017Fraunhofer-Institut für Chemische Technologie. Jahresbericht 2016/2017
 
Annual Report
2017Funktionsintegrierter Leichtbau
Henning, Frank; Karcher, Michael; Kärger, Luise; Müller, Timo
Book Article
2017Hexaphenoxycyclotriphosphazene as FR for CFR anionic PA6 via T-RTM: A study of mechanical and thermal properties
Höhne, Carl-Christoph; Wendel, Rainer; Käbisch, Bert; Anders, Thorsten; Henning, Frank; Kroke, Edwin
Journal Article
2017A holistic approach to use multi-scale fractions of dry carbon fibre production waste in filled bulk moulding compounds (BMC)
Huether, J.; Maertens, R.; Saburow, O.; Seiler, E.; Aicher, T.; Weidenmann, K.A.
Conference Paper
2017Hollow microsphere collapse sensitization of emulsion explosives - modeling and experimental results
Pimenta, J.; Quaresma, J.; Campos, J.; Deimling, Lukas; Keicher, Thomas
Conference Paper
2017Hydrogen oxidation reaction under HT-PEMFCs conditions: Inhibition due to fuel contaminants
Rau, M.; Jung, F.; Cremers, C.
Conference Paper
2017Impact of HP-RTM Process Parameters on Mechanical Properties with Epoxy and Polyurethane Systems
Swentek, I.; Beck, B.; Ugresic, V.; Potyra, T.; Henning, F.
Journal Article
2017Implementierung & Untersuchung von Aptamer-Modifizierten Dickschichtelektroden zur Elektrochemischen Detektion von Kokain
Diebold, Verena
Master Thesis
2017The influence of concentration, type and particle size of fillers on the dynamic mechanical behaviour of elastomeric HTPB binder
Bohn, Manfred A.
Conference Paper
2017Influence of mechanical activation on the properties of natural zeolites from Tokaj Mountain
Buzimov, A.Y.; Kulkov, S.N.; Kurovics, E.; Eckl, W.; Pappert, S.
Conference Paper
2017Influence of mixing ratio on the reaction behavior of ternary thermits
Roth, Evelin; Weiser, Volker; Lity, André; Raab, A.
Conference Paper
2017Influence of the manufacturing process (comparison MuCell and Direct-LFT) of foamed and fiber reinforced polymer sandwich structures on the fiber length
Lohr, C.; Menrath, A.; Elsner, P.; Weidenmann, K.A.
Conference Paper
2017Influence of the slurry thickness and heat treatment parameters on the formation of aluminium diffusion coating
Bermejo Sanz, Jorge; Roussel Garcia, Raquel; Kolarik, Vladislav; Lorenzo, Maria del Mar Juez
Journal Article
2017Influence of water during manufacturing of APA6 in the thermoplastic RTM process
Wendel, Rainer; Thoma, Bernd; Henning, Frank
Conference Paper
2017Injection molding of glass fiber reinforced polypropylene composite foams with laminate skins
Kasemphaibulsuk, P.; Holzner, M.; Kuboki, T.; Hrymak, A.
Conference Paper
2017Investigation and comparison of known and new ADN stabilizers
Heil, Moritz; Müller, C.; Hickmann, J.; Bohn, Manfred A.
Conference Paper
2017Investigation of ageing behaviour of plasticised nitrocellulose - accelerated ageing and real ageing
Bohn, Manfred A.
Conference Paper
2017Investigation of extinguished ADN/HTPB propellants with a special focus on sub-surface reactions
Weiser, Volker; Christilli, F.; Gettwert, Volker; Imiolek, Andreas; Kröber, Hartmut; Tagliabue, C.
Conference Paper
2017Investigation of the matrix influence on the laminate properties of epoxy- and polyurethane-based CFRPs manufactured with HP-RTM-process
Behnisch, F.; Rosenberg, P.; Weidenmann, A.K.; Henning, F.
Conference Paper
2017Investigation of the wetting behavior of Na and Na alloys on uncoated and coated Na-beta"-alumina at temperatures below 150 A degrees C
Ahlbrecht, K.; Bucharsky, C.; Holzapfel, M.; Tübke, J.; Hoffmann, M.J.
Journal Article
2017Kalibrierung von Temperatur- und Klimaprüfschränken
Cäsar, Joachim
Conference Paper
2017Luftschadstoffe im Innen- und Außenbereich - Problembeschreibung und Lösungsansätze
Schmid, Helmut; Koleczko, Andreas; Knapp, Sebastian
Conference Paper
2017A macroscopic approach to simulate the forming behaviour of stitched unidirectional non-crimp fabrics (UD-NCF)
Schirmaier, F.J.; Dörr, D.; Henning, F.; Kärger, L.
Journal Article
2017Material compatibility of ORC working fluids with polymers
Eyerer, S.; Eyerer, P.; Eicheldinger, M.; Sax, S.; Wieland, C.; Spliethoff, H.
Journal Article, Conference Paper
2017Material properties of electrodes for photovoltaic-coupled polymer electrolyte membrane water electrolysis
Baumann, Nils
: Stelter, M.; Tübke, J.
Dissertation
2017Material selection for CFRP-aluminium-foam-sandwiches manufactured by a PUR spraying process
Rupp, P.; Elsner, P.; Weidenmann, K.A.
Conference Paper
2017Mechanical properties of Desmophen-2200® based elastomer samples plasticized with energetic ionic liquids
Lemos, M.F.; Bohn, Manfred A.; Schaller, Uwe
Conference Paper
2017Medium-temperature molten sodium batteries with aqueous bromine and iodine cathodes
Holzapfel, M.; Wilde, D.; Hupbauer, C.; Ahlbrecht, K.; Berger, T.
Journal Article
2017Mg+REE alloying process test unit
Val, Diego
: Val, Diego; Araujo, Blanca; Rodriguez, Alicia; García, Jose Manuel
Report
2017Microwave energy assisted synthesis of poly lactic acid via continuous reactive extrusion: Modelling of reaction kinetics
Dubey, S.P.; Abhyankar, H.A.; Marchante, V.; Brighton, J.L.; Bergmann, B.; Trinh, G.; David, C.
Journal Article
2017Modeling and validation of gripper induced membrane forces in finite element forming simulation of continuously reinforced composites
Poppe, C.; Joppich, T.; Dörr, D.; Kärger, L.; Henning, F.
Conference Paper
2017Modeling of the non-isothermal crystallization kinetics of polyamide 6 composites during thermoforming
Kugele, D.; Dörr, D.; Wittemann, F.; Hangs, B.; Rausch, J.; Kärger, L.; Henning, F.
Conference Paper
2017Modeling, simulation and characterization of complex shaped solid propellant combustion
Wurster, S.
Journal Article
2017Modelling of Thermite Mixtures
Knapp, Sebastian; Eisenreich, Norbert; Kelzenberg, Stefan; Roth, Evelin; Weiser, Volker
Conference Paper
2017Möglichkeiten der Verfahrensintensivierung von reaktiven Extrusionen am Beispiel der Herstellung von Polylactid
Bergmann, Björn
: Elsner, P.; Teipel, U.
Dissertation
2017New benchmark in the tailored blank manufacturing - high volume production in an exceptional quality
Graf, Matthias; Baumgärtner, Sebastian; Henning, Frank
Conference Paper
2017Nitrocellulose and stabilizers: DFT calculations of bond dissociation and reactions
Nardai, Michael M.; Bohn, Manfred A.
Conference Paper
2017Nitrocellulose decomposition quantum mechanical calculations
Nardai, Michael M.; Bohn, Manfred A.
Conference Paper
2017Non-destructive characterization of fiber orientation in reinforced SMC as input for simulation based design
Schladitz, Katja; Büter, Andreas; Godehardt, Michael; Wirjadi, Oliver; Fleckenstein, Johanna; Gerster, Tobias; Hassler, Ulf; Jaschek, Katrin; Maisl, Michael; Maisl, Ute; Mohr, Stefan; Netzelmann, Udo; Potyra, Tobias; Steinhauser, Martin O.
Journal Article
2017On the relevance of modeling viscoelastic bending behavior in finite element forming simulation of continuously fiber reinforced thermoplastics
Dörr, D.; Schirmaier, F.J.; Henning, F.; Kärger, L.
Conference Paper
2017Oxidation of La-Sr-Mn-coated interconnector alloys for steam electrolysis under pressure in pure oxygen and in pure steam
Lorenzo, Maria del Mar Juez; Kolarik, Vladislav; Kuchenreuther-Hummel, Veronika; Pötschke, Martin; Schimanke, Danilo
Journal Article
2017Phenomena in combustion of propellants and explosives
: Koleczko, Andreas; Eisenreich, Norbert; Vorozhtsov, Alexander B.
Book
2017Polymerelektrolyt-Brennstoffzellensystem für ein autonomes Unterwasserfahrzeug
Hitscherich, Manuel
: Stolten, D.; Scherer, V.
Dissertation
2017Positive weathering results as milestones in the development of thermochromic nanocoatings
Schmid, Helmut
Conference Paper
2017Production and comparison of artificially aged microplastic particles
Patzak, Carolin; Reichert, Thomas; Forberger, Jens
Conference Paper
2017Produktgestaltung in der Partikeltechnologie. Bd.8
: Teipel, Ulrich; Türk, Michael
Conference Proceedings
2017Prozesskette zur Herstellung textiler 3D-Preforms: Einsatz der Tufting- und Partikelschaumtechnologie zur sequenziellen Umformung textiler Halbzeuge
Schöfer, S.; Schmitz, M.; Gries, T.; Mack, C.; Basler, A.
Journal Article
2017Pull-out testing of multiscale structured metallic z-reinforcements for CFRP laminates
Juergens, M.; Hafe Pérez Ferreira da Silva, M.T. von; Heimbs, S.; Lang, H.; Ladstaetter, E.; Hombergsmeier, E.
Journal Article
2017Quantitative kinetic analysis of a PdAu3 alloy catalyst for oxygen electro-reduction
Kurnatowski, Martin von; Bortz, Michael; Klein, Peter; Kintzel, Birgit; Cremers, Carsten
Journal Article
2017The REACH impact on gun propellant formulations
Böhnlein-Mauß, Jutta; Kröber, Hartmut
Journal Article
2017Real-time spectroscopy enabled by external cavity QCLs with MOEMS diffraction gratings
Butschek, Lorenz; Hugger, Stefan; Jarvis, Jan-Philip; Härtelt, Marko; Merten, André; Grahmann, Jan; Boskovic, Dusan; Fuchs, Frank; Ostendorf, Ralf; Schilling, Christian; Rattunde, Marcel; Wagner, Joachim
Conference Paper
2017REE recovery technology demonstrator
Sgarioto, Serena; Lagioia, Rocco; Claudia, Ana
: Müller, Torsten
Report
2017Remarks on the Evolution of Explosives
Homburg, A.
Journal Article
2017Revealing the initial reaction behavior in the continuous synthesis of metal-organic frameworks using real-time synchrotron X-ray analysis
Polyzoidis, Angelos; Etter, Martin; Herrmann, Michael; Löbbecke, Stefan; Dinnebier, Robert E.
Journal Article
2017Rheological In-Mold Measurements and Characterizations of Sheet-Molding-Compound (SMC) Formulations with Different Constitution Properties by Using a Compressible Shell Model
Hohberg, Martin; Kärger, Luise; Bücheler, David; Henning, Frank
Journal Article
2017The role of phosphate additive in stabilization of sulphuric-acid-based vanadium(V) electrolyte for all-vanadium redox-flow batteries
Roznyatovskaya, N.V.; Roznyatovsky, V.A.; Höhne, C.-C.; Fühl, M.; Gerber, T.; Küttinger, M.; Noack, J.; Fischer, P.; Pinkwart, K.; Tübke, J.
Journal Article
2017Safety-related design of the process chain for a robotic recovery and disposal process from ammunition and explosives handling to disposal
Müller, Paul; Keßler, Armin
Conference Paper
2017Scaling of magnesium recycling and alloying procedures
Val, Diego
: Val, Diego; Araujo, Blanca; Rodriguez, Alicia; García, Jose Manuel
Report
2017Simulation of the influence of embedded inserts on the RTM filling behavior considering local fiber structure
Seuffert, J.; Kärger, L.; Henning, F.
Conference Paper
2017Solid propellant burn rate measurement in a micro closed bomb
Wurster, S.
Conference Paper
2017Solid-liquid adhesion energies of composite propellant components determined by solution calorimetry
Nardai, Michael M.; Bohn, Manfred A.
Journal Article
2017Subcop - protection against suicide bomber attacks
Bernewitz, Johanna; Armbrust, Torsten; Hummel, Marc; Klemenz, Melanie; Neutz, Jochen; Roussel Garcia, Raquel
Conference Paper
2017Supported IrxRu1-xO2 anode catalysts for PEM-water electrolysis
Baumann, Nils; Cremers, Carsten; Pinkwart, Karsten; Tübke, Jens
Journal Article, Conference Paper
2017Synthesis of P(GAP-CO-EPH) - an energetic copolyether suitable for cast-cure applications
Hafner, Sven; Keicher, Thomas
Conference Paper
2017Thermal behavior of ADN & ADN prills - crystal and micro structure. Part I
Herrmann, Michael; Förter-Barth, Ulrich; Kempa, Paul-Bernd; Heintz, Thomas
Conference Paper
2017Thermal characterization of polyurethane foams with phase change material
Amaral, C.; Vicente, R.; Eisenblätter, J.; Marques, P.A.A.P.
Journal Article
2017Turbidimetric method for the determination of particle sizes in polypropylene/clay-composites during extrusion
Becker, Wolfgang; Guschin, Viktor; Mikonsaari, Irma; Teipel, Ulrich; Kölle, Sabine; Weiss, Patrick
Journal Article
2017Untersuchung des Einflusses von mineralischen Additiven auf die mechanischen Eigenschaften von Polylactid
Peters, Jenny
: Holzer, Andrei (Betreuer); Winkelmann, Felix (Gutachter)
Bachelor Thesis
2017Untersuchungen an Anodenmaterialien für die Alkalische Direkt-Methanol-Brennstoffzelle
Jurzinsky, Tilman
: Elsner, P.; Roth, C.
Dissertation
2017Vanadium proton exchange membrane water electrolyser
Noack, J.; Roznyatovskaya, N.; Pinkwart, K.; Tübke, J.
Journal Article
2017Verfahren und Vorrichtung zur Konsolidierung von imprägnierten Faserverbundstrukturen
Baumgärtner, Sebastian; Henning, Frank; Lohr, Christoph
Patent
2017Verfahren und Vorrichtung zur Prüfung der Staubdichtigkeit und / oder des Staubadsorptionsvermögens von Gegenständen
Cäsar, Joachim; Teipel, Ulrich
Patent
2017Verwendung von offen strukturierten, hydrophil modifizierten, mesoporösen Mikro-SiO2-Partikeln zur Abwehr von Hagel und/oder zur Auslösung der Abregnung einer Gewitterwolke und Verfahren zur Herstellung besagter Partikel
Schmid, Helmut; Eckl, Wilhelm; Inone-Kauffmann, Emilia Regina
Patent
2017A viscoelastic approach for modeling bending behavior in finite element forming simulation of continuously fiber reinforced composites
Dörr, D.; Schirmaier, F.J.; Henning, F.; Kärger, L.
Journal Article
20164. Symposium Rohstoffeffizienz und Rohstoffinnovationen 2016
: Teipel, Ulrich; Reller, Armin
Conference Proceedings
2016Accelerated aging and cure kinetics of butacene® containing composite propellants
Seyidoglu, Tijen; Bohn, Manfred A.; Mußbach, Günter
Conference Paper
2016Accurate cure modeling for isothermal processing of fast curing epoxy resins
Bernath, A.; Kärger, L.; Henning, F.
Journal Article
2016Advanced approaches to the CL-20/HMX cocrystal
Herrmannsdörfer, Dirk; Herrmann, Michael; Heintz, Thomas
Conference Paper
2016Analyse der Fließfrontprogression während des Injektionsprozesses lokal verstärkter Kohlenstofffaserhalbzeuge im RTM-Verfahren
Stanglmaier, S.; Vukoje, D.; Bickerton, S.; Hodde, J.; Repper, A.; Thoma, B.; Henning, F.
Journal Article
2016Analysis of CIE-color values using the example of tracer munition
Knapp, Sebastian; Bieroth, D.; Kelzenberg, Stefan; Lity, André; Poth, H.; Raab, Angelika; Roth, Evelin; Weiser, Volker
Conference Paper
2016Analysis of fiber orientation, microstructure and mechanical properties of specimens made from fiber-reinforced ABS manufactured by Fused Filament Fabrication (FFF)
Weidenmann, K.A.; Baumann, S.; Pinter, P.; Elsner, P.
Conference Paper
2016Analyzing the migration of plasticizers in powders by imaging spectroscopy
Pontius, Heike; Dörich, Manuela; Heil, Moritz
Conference Paper
2016Applications of Lignin Materials and Their Composites (Lignin Applications in Various Industrial Sectors, Future Trends of Lignin and Their Composites)
Naegele, H.; Pfitzer, J.; Ziegler, L.; Inone-Kauffmann, E.R.; Eisenreich, N.
Book Article
2016Batch versus flow acetalization of benzaldehyde with HKUST-1: Diffusion pathways and performance comparison
Piscopo, Calogero Giancarlo; Schwarzer, M.; Herrmann, Michael; Affini, Anna; Pelagatti, Paolo; Maestri, Giovanni; Maggi, Raimondo; Löbbecke, Stefan
Journal Article
2016Beitrag zur Umsetzung, Charakterisierung und Evaluierung eines Direktverfahrens zur Herstellung von strukturellen Bauteilkomponenten aus kohlenstofffaserverstärktem Kunststoff (InlinePrepreg)
Karcher, Michael
: Henning, Frank; Büter, A.
Dissertation
2016Bestimmung der Aushärtekinetik eines 2-stufig aushärtenden Epoxidharzes zur Herstellung von Hochleistungsfaserverbunden
Karcher, Michael; Chaloupka, Alexander; Henning, Frank; Schmölzer, Stefan; Moukhina, Elena
Journal Article
2016Bifunktionelle Synthesebausteine durch hydrothermale Verflüssigung von Organosolv-Lignin
Dahmen, N.; Hornung, U.; Schuler, J.; Schmiedl, D.; Rohde, V.
Journal Article
2016Burning behavior of AN/ADN propellants
Tagliabue, C.; Weiser, Volker; Imiolek, Andreas; Bohn, Manfred A.; Heintz, Thomas; Gettwert, Volker
Conference Paper
2016Characterisation and modelling of the curing reaction of HTPB with isocyanates by reaction heat determined by heat flow microcalorimetry and by volume shrinkage determined with a pressure curing cell
Bohn, Manfred A.; Seyidoglu, Tijen; Mußbach, Günter
Conference Paper
2016Characterisation of different gun propellants by long-term mass loss
Heil, Moritz; Wimmer, Ann-Kathrin; Bohn, Manfred A.
Conference Paper
2016Characterisation of the curing reaction of HTPB with isocyanate by heat flow microcalorimetry
Bohn, Manfred A.
Conference Paper
2016Characterisation of the draping behaviour of unidirectional non-crimp fabrics (UD-NCF)
Schirmaier, F.J.; Weidenmann, K.A.; Kärger, L.; Henning, F.
Journal Article
2016Characterization of membrane electrode assemblies for high-temperature PEM fuel cells
Rau, M.; Niedergesäß, A.; Cremers, Carsten; Alfaro, S.; Steenberg, T.; Hjuler, H.A.
Journal Article
2016Characterization of metal-organic frameworks using X-ray diffraction
Herrmann, Michael; Kempa, Paul-Bernd; Fietzek, Harald; Altenburg, Thomas; Polyzoidis, Angelos; Piscopo, Calogero Giancarlo; Löbbecke, Stefan
Journal Article
2016Characterization of nanoparticle layers deposited by wire explosions
Knapp, Sebastian; Eickershoff, B.; Eißler, Carmen; Fietzek, Harald; Günthner, Christian; Koleczko, Andreas; Schuppler, Heike
Conference Paper
2016Characterization of several HTPB binder samples by NMR, GPC and OH-number
Kaiser, M.; Ditz, B.; Dörich, Manuela; Bohn, Manfred A.
Conference Paper
2016Cohesive zone model parameterization by molecular dynamics
Nardai, Michael M.; Bohn, Manfred A.
Conference Paper
2016Combining wave and spectroscopic techniques to monitor the development of thermosets during cure
Puentes, J.; Wruck, L.; Chaloupka, A.; Rudolph, N.; Osswald, T.A.
Conference Paper
2016Comparative NMR study of nPrBTP and iPrBTP
Adam, C.; Rohde, V.; Müllich, U.; Kaden, P.; Geist, A.; Panak, P.J.; Geckeis, H.
Journal Article, Conference Paper
2016Composite materials ready to replace aluminium in internal combustion engines
Keyser, H. de; Berg, L.-F.; Stammler, J.
Journal Article
2016Consumption of atmospheric oxygen as ageing indicator of HTPB-based solid rocket propellants
Mußbach, Günter; Bohn, Manfred A.
Conference Paper
2016Consumption of Atmospheric Oxygen as Ageing Indicator of HTPB-based Solid Rocket Propellants
Mußbach, Günter; Bohn, Manfred A.
Conference Paper
2016Continuous microreactor synthesis of ZIF-8 with high space-time-yield and tunable particle size
Polyzoidis, Angelos; Altenburg, T.; Schwarzer, M.; Löbbecke, Stefan; Kaskel, S.
Journal Article
2016Cyclotriphosphazene und deren Potential als Flammschutzmittel in Polymeren
Käbisch, Bert
Dissertation
2016D 6.3 Communication Plan
Lagioia, Rocco
: Müller, Torsten; Rivas, Ana
Report
2016D 6.4 PEDR Plan for the Exploitation and Dissemination of Results
Lafioia, Rocco
: Müller, Torsten
Report
2016D 7.1 First Progress Report Part B
Rodriguez, Alicia; Araujo, Blanca; González, Manuel; Maroto, Jose Antonio; Val, Diego; García, Jose Manuel; Müller Thorsten; Lagioia, Rocco
Report
2016D1.2 REE Balance Problem Analysis
Binnemans, Koen; Jones, Peter Tom
: Yurramendi, Lourdes; Müller, Torsten
Report
2016D2.2 Magnesium Recycling Routes Optimization
Rodriguez, Alicia; San José, Ruth
: Rodriguez, Alicia; San José, Ruth; Müller, Torsten
Report
2016D3.1 Report on the capabilities, facilities, networking and funding sources of the consortium partners in the field of forest biomass secondary processing
Nikkanen, Ville; Mikonsaari, Irma; Moser, Kevin; Reinhardt, Sebastian; Roßberg, Christine; Bruyne, F. de; Anghel, N.; Rautio, J.; Härkönen, M.; Tukiainen, P.; Gravitis, J.; Andzs, M.; Ubele, D.; Tschentscher, R.; Aasen, I.-M.; Balzer Le, S.; Joffres, B.; Johnson, K.; Mackintosh, W.; Joelson, J.; Söderberg, D.; Garcia Jaca, J.; Silva Perez, D. da; Malin, M.
Report
2016Data interpretation and comparison of DMA results from HTPB-IPDI bonded composite elastomer samples used in an international Round Robin Test
Bohn, Manfred A.; Kronis-Rudigier, Gunnar; Mußbach, Günter
Conference Paper
2016Debond on command: Fast debonding by exothermic reaction due to microwave activation
Sims, Stefan; Gettwert, Volker; Urban, Helfried; Winkel, Andreas; Kahlmeyer, Martin; Böhm, Stefan
Conference Paper
2016Debonding using exothermic reactions
Sims, S.; Gettwert, V.; Urban, H.; Winkel, A.; Kahlmeyer, M.; Böhm, S.
Journal Article
2016Deliverable 4.2. Report on other main European and global players in the field of separation and downstream processing
Nikkanen, Ville; Böringer, Sarah; Roßberg, Christine; Fornell, R.; Johnson, K.; MacIntosh, W.; Illergard, J.; Tschentscher, R.; Joffres, B.; Hesser, F.; Hedeler, B.; Andzs, M.; Spiridon, I.; Stelian, V.; Bruyne, F. de; Azpeitia, M.; Ipinazar, E.; Grönroos, A.; Tukiainen, P.; Härkönen, M.; Malin, M.
Report
2016Design, fabrication and embedding of microscale interdigital sensors for real-time cure monitoring during composite manufacturing
Moghaddam, M.K.; Breede, A.; Chaloupka, A.; Bödecker, A.; Habben, C.; Meyer, E.-M.; Brauner, C.; Lang, W.
Journal Article
2016Detection of capacity imbalance in vanadium electrolyte and its electrochemical regeneration for all-vanadium redox-flow batteries
Roznyatovskaya, N.; Herr, T.; Küttinger, M.; Fühl, M.; Noack, J.; Pinkwart, K.; Tübke, J.
Journal Article
2016Development of a novel consolidation process for continuous-fiber-reinforced thermoplastics
Baumgärtner, S.; Lohr, C.; Henning, F.
Conference Paper
2016Development study of an air independent fuel cell system for an autonomous underwater vehicle (AUV)
Hitscherich, M.; Cremers, C.; Stolten, D.; Pinkwart, K.; Tübke, J.
Conference Paper
2016Diffusion and lifetime modeling for slurry aluminide coating on P92 at 650°C with a computational and experimental approach
Krukovskyi, P.; Metel, M.; Agüero, A.; Muelas, R.; Kolarik, V.
Journal Article
2016Direct adhesion of CFR-thermoplast on steel - testing and simulation of the lap shear fracture
Yüksel, F.; Hinterhölzl, R.; Drechsler, K.
Conference Paper
2016Direct Simulation of PBX Uniaxial Tensile Testing by Molecular Dynamics
Nardai, Michael M.; Bohn, Manfred A.
Conference Paper
2016Dispergierung und Eigenschaften von Carbon Nanotubes
Dresel, A.; Teipel, U.
Journal Article
2016Dynamic mechanical analysis of nitrocellulose-plasticizer mixtures
Mitró, Daniel; Böhnlein-Mauß, Jutta
Abstract
2016Effect of Butacene® on ageing of composite propellants
Seyidoglu, Tijen; Bohn, Manfred A.
Conference Paper
2016Effect of different technological and energy supply related measures on the primary energy demand of CFPR production
Wehner, Daniel; Hohmann, Andrea; Schwab, Bernhard; Albrecht, Stefan; Ilg, Robert; Sedlbauer, Klaus; Leistner, Philip; Drechsler, Klaus
Conference Paper
2016Effect of model fuel impurities for reformed jet fuels on the hydrogen oxidation at platinum based catalysts under HT-PEMFC conditions
Cremers, C.; Rau, M.S.; Niedergesäß, A.; Pinkwart, K.; Tübke, J.
Conference Paper
2016The efficient route to tailored Organo Sheets
Baumgärtner, Sebastian; John, Jennifer; Henning, Frank; Huber, Timo; Hangs, Benjamin
Journal Article
2016Effizient zum maßgeschneiderten Organoblech
Baumgärtner, Sebastian; John, Jennifer; Henning, Frank; Huber, Timo; Hangs, Benjamin
Journal Article
2016EILs - suitable substances for future energetic applications?
Schaller, Uwe; Keicher, Thomas; Krause, Horst; Schlechtriem, S.
Conference Paper
2016Einfluss der Eindickung von dichtereduziertem Sheet Moulding Compound auf die Formteilwelligkeit
Keckl, Christoph
: Henning, F.; Mitschang, P.
Dissertation
2016Einsatz der ortsaufgelösten Röntgenbeugung zur Untersuchung der Destabilisierungstiefe von Wärmedämmschichten
Kolarik, Vladislav; Kuchenreuther, V.; Juez-Lorenzo, Maria; Fietzek, Harald; Stamm, W.
Abstract
2016Emission spectroscopy on pyrotechnic mixtures
Knapp, Sebastian; Günthner, Christian; Kelzenberg, Stefan; Roth, Evelin; Raab, Angelika; Weiser, Volker
Conference Paper
2016Energetic Materials. Synthesis, Characterization, Processing
 
Conference Proceedings
2016Energetic Nanomaterials: Synthesis, Characterization, and Application
: Zarko, V.E.; Gromov, A.A.
Book
2016Energieeffiziente Herstellung komplexer Hochleistungsfaserverbundbauteile mittels Pultrusion, In-Line Flechten, Blasumformung und Endbearbeitung (PulForm)
: Bezerra, Renato
Report
2016Energy efficiency and ecological benefits of a self-heated CFRP tool designed for resin transfer moulding
Arikan, E.; Hohmann, A.; Kammerhofer, P.; Reppe, M.; Remer, N.; Drechsler, K.
Conference Paper
2016Entkleben unter Nutzung exothermer Reaktionen
Sims, Stefan; Gettwert, Volker; Urban, Helfried; Winkel, Andreas; Kahlmeyer, Martin; Böhm, Stefan
Journal Article
2016Entwicklung einer Debonding-on-Demand-Konzeptlösung unter Verwendung funktioneller Suszeptor-Additivmaterialien zur Erzeugung von Thermoschocks
Sauer, Michael
: Horn, S.; Drechsler, K.
Master Thesis
2016Entwicklung eines Design for End of Life Tools für die Luftfahrtindustrie
Wimmer, A.K.; Salles, A.; Müller, T.; Elsner, P.
Journal Article
2016Ergebnisse einer Befragung zum Umgang mit Porenbetonabfällen aus dem Abbruch von Gebäuden
Stier, Christian; Forberger, Jens
Journal Article
2016Ethanol oxidation reaction (EOR) investigation on Pt/C, Rh/C, and Pt-based bi- and tri-metallic electrocatalysts: A DEMS and in situ FTIR study
Bach Delpeuch, A.; Maillard, F.; Chatenet, M.; Soudant, P.; Cremers, C.
Journal Article
2016European training network to accelerate the development chain of nanostructured polymers
: Hübner, Christof
Report
2016Evaluation of Different Commercially Available Surface-Enhanced Raman Spectroscopy (SERS) - Substrates and Improved Methods for Detection of Explosives
Schweikert, Wenka; Mendl, A.; Eichberger, Sascha
Abstract
2016Evaluation of metal-organic frameworks for gas-phase preconcentration and sample enrichment by inverse gas chromatography (IGC)
Rieger, Max; Wittek, Michael; Schnürer, Frank; Löbbecke, Stefan
Conference Paper
2016Experimental analysis of gaps and overlaps caused by intra-ply sectorization in the thermoplastic automated fiber placement process
Zenker, T.; Schuerger, C.; Drechsler, K.
Conference Paper
2016Experimental investigation of the radius forming behavior of fiber reinforced thermoplastics
Schug, A.; Hinterhölzl, R.; Drechsler, K.
Conference Paper
2016Explosives
Meyer, R.; Köhler, J.; Homburg, A.
Book
2016Fast heating of selective adsorber beads for large volume application
Heil, Moritz; Baumann, Sascha; Krause, Horst
Conference Paper
2016Feinzerkleinerung lignocellulosehaltiger Rohstoffe
Eisenlauer, M.; Teipel, U.
Journal Article
2016First verification of the modified hartmann-apparatur with aluminum and magnesium particles
Kuchenreuther-Hummel, V.; Schneider, M.; Liehmann, M.; Neutz, J.
Conference Paper
2016Flexible intelligente Bearbeitungstechnologien für komplexe Faserverbundbauteile
Drechsler, Klaus
Book
2016Fraunhofer-Institut für Chemische Technologie. Jahresbericht 2015/2016
 
Annual Report
2016Fuel Flexible, Near Zero Emissions, Adaptive Performance Marine Engine
: Kuhlen, Karl Gerhard
Report
2016Fuel Flexible, Near Zero Emissions, Adaptive Performance Marine Engine
: Kuhlen, Karl Gerhard
Report
2016Gasgenerator-Treibstoff auf der Basis von Ammoniumdinitramid (ADN) und Verfahren zu seiner Herstellung
Krause, Horst; Schlechtriem, Stefan; Weiser, Volker; Schaller, Uwe; Hürttlen, Jürgen
Patent
2016Gestaltabweichungen dünnwandiger, lokal verstärkter CF/PPS Gelegelaminate
Hangs, Benjamin
: Henning, F.; Ermanni, P.
Dissertation
2016Green liquid propellant oxidizers basing on solutions of ADN and an in commercial hydrogen peroxide for hypergolic propellants
Weiser, Volker; Hürttlen, Jürgen; Schaller, Uwe; Imiolek, Andreas; Lity, André; Kelzenberg, Stefan
Conference Paper
2016Hand in Hand zu Serienlösungen
Karcher, Michael; Huber, Timo; Thoma, Bernd
Journal Article
2016Highly-active Pd-Cu electrocatalysts for oxidation of ubiquitous oxygenated fuels
Serov, A.; Asset, T.; Padilla, M.; Matanovic, I.; Martinez, U.; Roy, A.; Artyushkova, K.; Chatenet, M.; Maillard, F.; Bayer, D.; Cremers, C.; Atanassov, P.
Journal Article
2016Hot spots sensitization and optical detonation measurements of emulsion explosives
Quaresma, J.; Campos, J.; Pimenta, J.; Ribeiro, A.; Mendes, R.; Gois, J.; Deimling, Lukas; Keicher, Thomas
Conference Paper
2016Hybrid resin improves position and alignment of continuously reinforced prepreg during compression co-molding with sheet molding compound
Bücheler, D.; Henning, F.
Conference Paper
2016Impact of water adsorbates on the acetaldehyde oxidation reaction on Pt- and Rh-based multimetallic electrocatalysts
Bach Delpeuch, A.; Cremers, C.; Chatenet, M.
Journal Article
2016In-situ Characterization of Curing Reaction of GAP and Isocyanates by Near Infrared Spectroscopy
Imiolek, Andreas; Becker, Wolfgang; Sachsenheimer, K.; Weiser, Volker
Conference Paper
2016In-situ detection of phase transitions of semi-crystalline carbon fiber reinforced thermoplastics using dielectric analysis and its correlation to DMA and DSC
Chaloupka, A.; Grund, D.; Wedel, A.; Rudolph, N.M.; Drechsler, K.
Conference Paper
2016In-situ Überwachung der kontinuierlichen Synthese van ZIF-8
Polyzoidis, Angelos; Dinnebier, Robert E.; Herrmann, Michael; Piscopo, Calogero Giancarlo; Löbbecke, Stefan
Abstract
2016Industrial waste residues evaluation
Sgarioto, Serena; Binnemans, Koen; Yurramendi, Lourdes
: Müller, Torsten
Report
2016Influence of aging on the burning behavior of ferrocene-type catalyzed composite rocket propellants
Imiolek, Andreas; Bohn, Manfred A.; Weiser, Volker; Seyidoglu, Tijen
Conference Paper
2016The influence of Al4C3 nanoparticles on the physical and mechanical properties of metal matrix composites at high temperatures
Vorozhtsov, S.; Kolarik, V.; Promakhov, V.; Zhukov, I.; Vorozhtsov, A.; Kuchenreuther-Hummel, V.
Journal Article
2016Influence of charge size on enhanced blast explosives
Gerber, P.; Happ, A.
Abstract
2016Influence of epoxy- and polyamide-compatible carbon fiber sizings on interfacial fracture toughness and in-plane shear properties of carbon fiber reinforced polyamide-6
Greisel, M.; Kurek, A.; Chaloupka, A.; Moosburger-Will, J.; Mueller, W.M.; Sause, M.G.R.; Horn, S.
Conference Paper
2016The influence of mass-transport conditions on the ethanol oxidation reaction (EOR) mechanism of Pt/C electrocatalysts
Bach Delpeuch, A.; Jacquot, M.; Chatenet, M.; Cremers, C.
Journal Article
2016Influence of various binders and oxidizers on the spectral emission of pyro-organic flares
Roth, E.; Weiser, Volker; Raab, Angelika; Lity, André
Conference Paper
2016Innovative Technologien für Ressourceneffizienz - Strategische Metalle und Mineralien
: Dürkoop, A.; Brandstetter, C.P.; Gräbe, G.; Rentsch, L.
Book
2016Integrated pre-concentrator gas sensor microsystem for ppb level benzene detection
Leidinger, M.; Rieger, M.; Sauerwald, T.; Alépée, C.; Schütze, A.
Journal Article
2016Integrated pre-concentrator gas sensor system for improved trace gas sensing performance
Leidinger, M.; Sauerwald, T.; Schütze, A.; Alepee, C.; Rieger, M.
Conference Paper
2016The interface of CFRP face sheets and aluminum foam cores in hybrid sandwich panels manufactured by a PUR spraying process
Rupp, P.; Wafzig, F.; Weidenmann, K.A.
Conference Paper
2016INTRA r³+ - Integration und Transfer der r³-Fördermaßnahme
Dürkoop, Anke; Büttner, Philipp; Albrecht, Stefan; Brandstetter, Christian P.; Erdmann, Martin; Gräbe, Gudrun; Moller, Björn; Höck, Michael; Kleeberg, Kirstin; Rentsch, Lars; Schneider, Katja; Ostertag, Katrin; Pfaff, Matthias; Sartorius, Christian; Tercero Espinoza, Luis A.; Szurlies, Michael; Wilken, Hildegard
Book Article
2016Investigation of nitromethane as an ingredient in gelled propellants
Schaller, Uwe; Hürttlen, Jürgen; Keicher, Thomas
Conference Paper
2016Investigation of ruthenium promoted palladium catalysts for methanol electrooxidation in alkaline media
Jurzinsky, T.; Kammerer, P.; Cremers, C.; Pinkwart, K.; Tübke, J.
Journal Article
2016Investigation on the structural behavior of a metallically 3D-reinforced CFRP/CFRP joint using a variable search based on finite element analyzes
Lang, H.; Nogueira, A.C.; Jürgens, M.; Hombergsmeier, E.; Hinterhölzl, R.; Drechsler, K.
Journal Article
2016Kontrolle mikrobieller Umwelteinflüsse auf Produkte und Prozesse
Schmid, Helmut; Koleczko, Andreas; Knapp, Sebastian
Conference Paper
2016Layup and process dependent wrinkling behavior of PPS/CF UD tape-laminates during non-isothermal press forming into a complex component
Joppich, T.; Doerr, D.; Meulen, L. van der; Link, T.; Hangs, B.; Henning, F.
Conference Paper
2016Leichtbaupotenzial langfaserverstärkter Thermoplaste (LFT) in Integralschaumbauweise hergestellt durch Schaumspritzgießen mit Dekompressionshub
Roch, Alexander
: Elsner, Peter; Drummer, D.; Henning, Frank
Dissertation
2016Magnesium dross and scrapquality
Rivas, Ana; Alcalde, Estíbaliz; San José, Ruth
: Rivas, Ana; Val, Diego; Alcalde, Estíbaliz; San José, Ruth; Müller, Torsten
Report
2016Manfred Held, a life devoted to explosives science. Editorial
Eisenreich, N.
Journal Article
2016Mass flow measurements on airbag inflators
Arce, Yurrita P.; Klahn, Thorsten; Deimling, Lukas; Roussel Garcia, Raquel; Schreiber, Achim
Conference Paper
2016Measuring where it counts
Bergmann, Björn; Mikonsaari, Irma; Guschin, Viktor; Weiß, Patrick; Baumann, Sascha
Journal Article
2016Mechanical properties of unidirectional continuous carbon fiber reinforced sheet molding compounds
Trauth, A.; Bücheler, D.; Henning, F.; Weidenmann, K.A.
Conference Paper
2016Membrane electrode assemblies for water electrolysis using WO3-supported IrxRu1-xO2 catalysts
Baumann, Nils; Cremers, Carsten; Pinkwart, Karsten; Tübke, Jens
Journal Article
2016Methanol oxidation on PdRh/C electrocatalyst in alkaline media: Temperature and methanol concentration dependencies
Jurzinsky, T.; Kintzel, B.; Bär, R.; Cremers, C.; Tübke, J.
Journal Article
2016Methanol oxidation on Ru- or Ni-modified Pd-electrocatalysts in alkaline media: A comparative differential electrochemical mass spectrometry study
Jurzinsky, T.; Kintzel, B.; Bär, R.; Cremers, C.; Pinkwart, K.; Tübke, J.
Conference Paper
2016A method for validation of finite element forming simulation on basis of a pointwise comparison of distance and curvature
Dörr, D.; Joppich, T.; Schirmaier, F.; Mosthaf, T.; Kärger, L.; Henning, F.
Conference Paper
2016Mittendrin statt nur dabei
Bergmann, Björn; Mikonsaari, Irma; Guschin, Viktor; Weiß, Patrick; Baumann, Sascha
Journal Article
2016Modelling and simulation of the pultrusion process with closed injection and impregnation molds
Bezerra, R.; Henning, F.
Conference Paper
2016Modelling and validation of synthesis of poly lactic acid using an alternative energy source through a continuous reactive extrusion process
Dubey, S.P.; Abhyankar, H.A.; Marchante, V.; Brighton, J.L.; Blackburn, K.; Temple, C.; Bergmann, B.; Trinh, G.; David, C.
Journal Article
2016Modelling of measurement data on the curing reaction of HTPB with isocyanate obtained by heat flow microcalorimetry and pressure decrease in closed vessel cells
Bohn, Manfred A.; Seyidoglu, Tijen; Mußbach, Günter
Conference Paper
2016Molecular dynamics simulation of cohesion within solid propellants
Nardai, Michael M.; Bohn, Manfred A.
Conference Paper
2016Multiaxiale Hochleistungs-Gewebekonstruktionen und deren belastungskonforme Nutzung zu Leichtbau-Composites mit unterschiedlichen Matrices
: Wendel, Rainer (Projektleiter); Bauder, Hans-Jürgen (Projektleiter)
Report
2016Multiscale dispersion-state characterization of nanocomposites using optical coherence tomography
Schneider, S.; Eppler, F.; Weber, M.; Olowojoba, G.; Weiss, P.; Hübner, C.; Mikonsaari, I.; Freude, W.; Koos, C.
Journal Article
2016Nanometals: Synthesis and Application in Energetic Systems
Gromov, A.A.; Korotkikh, A.G.; Il'in, A.; DeLuca, L.T.; Arkhipov, V.A.; Monogarov, K.A.; Teipel, U.
Book Article
2016Neuartige Innenraumbeschichtung zur nachhaltigen Verbesserung der Raumluft und des Raumklimas
Schmid, Helmut
Patent
2016New energetic ingredients for solid rocket propulsion
DeLuca, L.T.; Palmucci, I.; Franzin, A.; Weiser, V.; Gettwert, V.; Wingborg, N.; Sjoblom, M.
Journal Article
2016Non-destructive ageing state determination of solid rocket motors charges
Tussiwand, G.; Eineder, L.; Mussbach, G.; Bohn, M.A.
Conference Paper
2016Novel low-cost selective pre-concentrators based on metal organic frameworks
Wilhelm, I.; Rieger, M.; Hürttlen, J.; Wittek, M.; Alépée, C.; Leidinger, M.; Sauerwald, T.
Journal Article, Conference Paper
2016Numerical simulation of advanced pultrusion processes with microwave heating
Barkanov, E.; Akishin, P.; Emmerich, R.; Graf, M.
Conference Paper
2016Ökoeffizienz-Analyse zur Bewertung unterschiedlicher CFK-Recyclingtechnologien
Dieterle, Michael
: Seiler, Elisa (Betreuer); Viere, Tobias (Betreuer); Lang-Koetz, Claus (Zweitkorrektor)
Master Thesis
2016On the design of a comb-shaped, poly(phenylene oxide)-based anodic binder for anion-exchange membrane direct methanol fuel cell (AEM-DMFC)
Jurzinsky, T.; Bär, R.; Heppe, N.; Kübler, M.; Jung, F.; Cremers, C.; Tübke, J.
Conference Paper
2016On the general water harvesting capability of metal-organic frameworks under well-defined climatic conditions
Trapani, F.; Polyzoidis, Angelos; Löbbecke, Stefan; Piscopo, Calogero Giancarlo
Journal Article
2016On the influence of Ag on Pd-based electrocatalyst for methanol oxidation in alkaline media: A comparative differential electrochemical mass spectrometry study
Jurzinsky, T.; Cremers, C.; Pinkwart, K.; Tübke, J.
Journal Article
2016On-board fuel tailoring with a novel catalytic evaporator for HCCI combustion
Szolak, R.; Morales Wiemer, E.A.; Kraljevic, I.; Susdorf, A.; Karadeniz, H.; Epple, B.; Rümmele, F.; Schaadt, A.
Report
2016One step to comparable off-plane permeability results - an improved measuring method for transverse permeability and compaction behavior of textile fiber materials
Graupner, R.; Drechsler, K.
Conference Paper
2016Online detection and categorisation of defects along carbon fibre production using a high resolution, high width line scan vision system
Geinitz, S.; Wedel, A.; Margraf, A.
Conference Paper
2016Optimization of PLA compounds using novel nucleating agents and plasticizers
Moser, K.; Schmitt, M.; Holzer, A.; Bergmann, B.; Diemert, J.; Elsner, P.
Conference Paper
2016Optimized profile extrusion processes for biopolymer blends
Moser, K.; Holzer, A.; Bergmann, B.; Diemert, J.
Conference Paper
2016Particle properties and crystal structure of ADN-prills
Heintz, Thomas; Herrmann, Michael; Leisinger, Karlfred; Reinhard, Werner
Conference Paper
2016PDF - Ein neuer Ansatz zur Strukturbestimmung energetischer Materialien
Herrmann, Michael; Kempa, Paul-Bernd
Abstract
2016Performance of HIPIMS deposited CrN/NbN nanostructured coatings exposed to 650 °C in pure steam environment
Hovsepian, P.E.; Ehiasarian, A.P.; Purandare, Y.P.; Biswas, B.; Pérez, F.J.; Lasanta, M.I.; De Miguel, M.T.; Illana, A.; Juez-Lorenzo, M.; Muelas, R.; Agüero, A.
Journal Article
2016Poly(Epichlorohydrin-CO-1,2-Epoxyhexane) - a promising precursor for an energetic azido polymer for cast-cure processing
Hafner, Sven; Keicher, Thomas; Klapötke, Thomas M.
Conference Paper
2016Polyurethanes based on 2,2-Dinitropropane-1,3-diol and 2,2-bis(azidomethyl)propane-1,3-diol as potential energetic binders
Bellan, A.B.; Hafner, S.; Hartdegen, V.A.; Klapötke, T.M.
Journal Article
2016Positive effect of the fluorine moiety on the oxygen storage capacity of UiO-66 metal-organic frameworks
Piscopo, C.G.; Trapani, F.; Polyzoidis, A.; Schwarzer, M.; Pace, A.; Loebbecke, S.
Journal Article
2016Potential Energetic Plasticizers on the Basis of 2,2-Dinitropropane-1,3-diol and 2,2-Bis(azidomethyl)propane-1,3-diol
Hafner, S.; Hartdegen, V.A.; Hofmayer, M.S.; Klapötke, T.M.
Journal Article
2016Preface
Zarko, V.E.; Gromov, A.A.
Book Article
2016Problematik der Übertragbarkeit bestehender Verfahren zur Kunststoff-Charakterisierung auf Kunststoffgemische
Forberger, J.; Becker, R.W.
Journal Article
2016Process and mold development of direct long fiber reinforced foam injection molding on the example of polycarbonate and glasfibers
Lohr, C.; Menrath, A.; Elsner, P.; Weidenmann, K.A.
Conference Paper
2016Process-parameter-dependent spring-in and warpage of locally reinforced ud tape laminates and V-shaped profiles
Hangs, B.; Link, T.; Henning, F.
Conference Paper
2016Proximal detection of traces of energetic materials with an eye-safe UV raman prototype developed for civil applications
Chirico, R.; Almaviva, S.; Colao, F.; Fiorani, L.; Nuvoli, M.; Schweikert, W.; Schnürer, F.; Cassioli, L.; Grossi, S.; Murra, D.; Menicucci, I.; Angelini, F.; Palucci, A.
Journal Article
2016Radiation-grafted materials for energy conversion and energy storage applications
Nasef, M.M.; Gürsel, S.A.; Karabelli, D.; Güven, O.
Journal Article
2016Recent advances and applications of external Cavity-QCLs towards hyperspectral imaging for standoff detection and real-time spectroscopic sensing of chemicals
Ostendorf, R.; Butschek, L.; Hugger, S.; Fuchs, F.; Yang, Q.; Jarvis, J.; Schilling, C.; Rattunde, M.; Merten, A.; Grahmann, J.; Boskovic, D.; Tybussek, T.; Rieblinger, K.; Wagner, J.
Journal Article
2016Recyclable epoxy system for HP-RTM application
Pastine, S.; Meirson, G.; Swentek, I.; Nasrullah, M.; Kosinski, S.; Banatao, R.; Ugresic, V.; Henning, F.
Conference Paper
2016Recycling von Textilien aus carbonfaserverstärkten Kunststoff-Bauteilen und deren Produktion
Seiler, E.; Stark, A.; Forberger, J.
Journal Article
2016Recyclinggerechte Produktentwicklung in der Luftfahrt am Beispiel Fluggastsitz
Wimmer, Ann-Kathrin
: Elsner, P.; Fröhling, M.; Eyerer, P.
Dissertation
2016Scenario-based comparative assessment of potential future electricity systems - A new methodological approach using Germany in 2050 as an example
Lunz, B.; Stöcker, P.; Eckstein, S.; Nebel, A.; Samadi, S.; Erlach, B.; Fischedick, M.; Elsner, P.; Sauer, D.U.
Journal Article
2016Schnelle Prozesse - Mikrowellen in der Verfahrenstechnik
Emmerich, Rudolf
Journal Article
2016Sensitivity of material properties on wrinkling behavior and fiber reorientation of thermoplastic UD-Tape laminates during forming analyzed by Finite Element forming simulation
Dörr, Dominik; Joppich, Tobias; Schirmaier, Fabian; Mosthaf, Tobias; Kärger, Luise; Henning, Frank
Conference Paper
2016Shrinking core model to describe metal particle oxidation from thermal analysis data
Kelzenberg, S.; Eisenreich, N.; Knapp, S.; Weiser, V.
Journal Article
2016Simulation of closed vessel combustion using the 2D ICT-Cellular-Combustion-Algorithm
Wurster, S.; Fischer, T.S.
Conference Paper
2016Simulation of double base propellant combustion using the ICT-cellular-combustion-algorithm
Wurster, Sebastian
Conference Paper
2016Stärkebasierte Textilien: Kostengünstige Textilien aus Biopolymeren
Manvi, P.K.; Seide, G.; Gries, T.; Buczko, A.; Moser, K.
Journal Article
2016Status on root cause investigation on airbag inflator failure mode
Neutz, J.; Ebeling, H.; Yoshimura, K.
Journal Article
2016Study of the long-term operation of a vanadium/oxygen fuel cell
Noack, J.; Cognard, G.; Oral, M.; Küttinger, M.; Roznyatovskaya, N.; Pinkwart, K.; Tübke, J.
Journal Article
2016Synthese und Charakterisierung von energetischen ionischen Liquiden auf Basis von 4-Amino-1,2,4-triazol
Schaller, Uwe
: Schlechtriem, Stefan; Elsner, Peter
Dissertation
2016Techno-economic modeling and analysis of redox flow battery systems
Noack, J.; Wietschel, L.; Roznyatovskaya, N.; Pinkwart, K.; Tübke, J.
Journal Article
2016Temperature and spatially resolved investigations of the microstructure of gun propellants by means of x-ray diffraction
Herrmann, Michael; Förter-Barth, Ulrich; Fietzek, Harald; Böhnlein-Mauß, Jutta; Kaiser, M.
Conference Paper
2016Temperaturverhalten von Ammoniumdinitramid und Wechselwirkungen mit Additiven für Festtreibstoffe
Herrmann, Michael; Kempa, Paul-Bernd; Förter-Barth, Ulrich; Heintz, Thomas
Abstract
2016Test facility for investigation of impact-initiated bimetallic compounds
Schreiber, Achim; Klahn, Thorsten; Zilly, Andreas; Deimling, Lukas; Schuch, Michael
Conference Paper
2016Thermogravimetric analysis of molybdenum oxide (MoO3) decomposition
Knapp, Sebastian; Eisenreich, Norbert; Kuchenreuther-Hummel, Veronika; Kelzenberg, Stefan; Koleczko, Andreas; Schuppler, Heike
Conference Paper
2016Towards an all-vanadium redox-flow battery electrolyte: electrooxidation of V(III) in V(IV)/V(III) redox couple
Roznyatovskaya, N.; Noack, J.; Fühl, M.; Pinkwart, K.; Tübke, J.
Journal Article
2016Die Tücke liegt im Detail - Ringversuch zum Thema Mischgasprüfung
Lauff, Mareike; Cäsar, Joachim; Beier, Jochen
Conference Paper
2016Turning trees into foam
Schneider, A.; Rapp, F.; Iglhaut, K.; Michel, A.
Journal Article
2016Überprüfung der Kalibrierung von Manganin-Stoßdrucksonden im Druckbereich von 150 bis 275 kbar
Leibold, Marvin
Bachelor Thesis
2016A unified kinetic model for adsorption and desorption - Applied to water on zeolite
Gaulke, M.; Guschin, V.; Knapp, S.; Pappert, S.; Eckl, W.
Journal Article
2016Untersuchungen zur Aminierung von Alkoholen mit einer DRIFTS-Zelle
Rosemeier, Michael
Bachelor Thesis
2016Using Thermogravimetric Analysis to Determine Carbon Fiber Weight Percentage of Fiber-Reinforced Plastics
Bücheler, D.; Kaiser, A.; Henning, F.
Journal Article
2016Utilization of recycled wood in biorefineries: Preliminary results of steam explosion and ethanol/water organosolv pulping without a catalyst
Lesar, Bostjan; Humar, Miha; Hora, Guido; Hachmeister, Philipp; Schmiedl, Detlef; Pindel, Elvira; Siika-aho, Matti; Liitiä, Tiina
Journal Article
2016Verfahren und Vorrichtung zur Herstellung von mit Einlegern versehenen Polymer-Formteilen
Bücheler, David
Patent
2016Verfahren zur Regeneration der Elektrolytlösung eines Redox-Flow-Akkumulators
Noack, Jens; Fischer, Peter; Tübke, Jens; Pinkwart, Karsten
Patent
2016Verfahren zur Versorgung eines elektische Energie umsetzenden Implantates mit elektrischer Energie
Schmid, Helmut; Eckl, Wilhelm
Patent
2016Von der Idee zur Innovation
: Apel, Stefan (Hrsg.); Haupt, Olaf J. (Hrsg.); Krause, Dörthe (Hrsg.); Parrisius, Martina (Hrsg.)
Report
2016Vorrichtung zur direkten und reversiblen Umwandlung thermischer Energie in elektrische Energie
Schmid, Helmut; Koleczko, Andreas
Patent
2016Vorrichtung zur Umwandlung der Energie elektromagnetischer Strahlung in elektrische Energie
Schmid, Helmut; Walschburger, Erik; Mehring, Günter
Patent
2015Aging of explosive crystals investigated by x-ray diffraction
Herrmann, M.; Bohn M.A.
Conference Paper
2015Aircraft Metals Recycling - Process, Challenges and Opportunities
Müller, Torsten
Presentation
2015Alkaline direct alcohol fuel cells
Cremers, C.; Jurzinsky, T.; Jung, F.; Pinkwart, K.; Tübke, J.
Conference Paper
2015Analyse und Bewertung des Verzugs von lokal verstärkten Gelegelaminaten aus CP/PPS
Link, Tobias
: Hangs, Benjamin (Betreuer)
Master Thesis
2015Analysis of pure tar substances (polycyclic aromatic hydeocarbons) in the gas stream using ultraviolet visible (UV-Vis) spectroscopy and multivariate cure resolution (MCR)
Weide, Tobias; Guschin, Viktor; Becker, Wolfgang; Kölle, Sabine; Maier, Simon; Seidelt, Stephan
Journal Article
2015Anion intercalation into graphite from a sodium-containing electrolyte
Bordet, F.; Ahlbrecht, K.; Tübke, J.; Ufheil, J.; Hoes, T.; Oetken, M.; Holzapfel, M.
Journal Article
2015Application of thermochemical sorption material to control the moisture of ammunition
Guschin, Viktor; Knapp, Sebastian; Wehner, Harald; Hakspiel, Fabian; Pappert, Sandra; Eckl, Wilhelm
Conference Paper
2015Assessment of description quality of models by information theoretical criteria based on Akaike and Schwarz-Bayes applied with stability data of energetic materials
Bohn, Manfred A.
Conference Paper
2015Aufschäumen von Hohlraumstrukturen für Strichschichten zur Reduzierung des spezifischen Gewichtes
Stocker, T.; Eisenblätter, J.; Gericke, R.
Journal Article
2015Battery
Müller, Dominik; Abert, Michael; Berger, Thomas; Krampfert, Matthias; Bayha, Thomas
Patent
2015Characterization of a fuel cell stack for use in material handling applications
Keller, S.; Cremers, C.; Niedergesäß, A.; Özel, T.
Conference Paper
2015Characterization of butacene based composite propellants by loss factor curves determined with DMA
Seyidoglu, Tijen; Bohn, Manfred A.
Conference Paper
2015Characterization of complexly warped components made from locally reinforced UD-tape laminates
Hangs, B.; Link, T.; Henning, F.
Abstract
2015Characterization of sibex in 1,5m³ ICT detonation tank
Materna, Miriam; Keßler, Armin
Conference Paper
2015Charakterisierung von Metall-organischen Gerüststrukturen (MOF) mit Hilfe der Röntgenbeugung
Herrmann, M.; Kempa, P.B.; Altenburg, T.; Polyzoidis, A.; Piscopo, C.G.; Löbbecke, S.
Conference Paper
2015Die Chemie der Redox-Flow-Batterien
Noack, Jens; Roznyatsovskaya, Nataliya; Herr, Tatjana; Fischer, Peter
Journal Article
2015The Chemistry of Redox-Flow Batteries
Noack, J.; Roznyatovskaya, N.; Herr, T.; Fischer, P.
Journal Article
2015Cohesion properties in PBX and composite propellants - computational details
Nardai, Michael M.; Bohn, Manfred A.
Conference Paper
2015Cohesion properties in PBX and composite propellants - computational results and experimental aspects
Nardai, Michael M.; Bohn, Manfred A.
Conference Paper
2015Combustion Synthesis of AlN (Al3O3N), BN, ZrN, and TiN in Air and Ceramic Application
Gromov, A.A.; Maggi, F.; Malikova, E.V.; Pautova, J.I.; Il'in, A.P.; Popenko, E.M.; Sergienko, A.V.; Korotkikh, A.G.; Teipel, U.
Book Article
2015Crosslinking of poly(vinylene fluoride) separators by gamma-irradiation for electrochemical high power charge applications
Karabelli, D.; Leprêtre, J.-C.; Dumas, L.; Rouif, S.; Portinha, D.; Fleury, E.; Sanchez, J.-Y.
Journal Article
2015D 6-2 REMAGHIC Website
Rivas, Ana
: Rodriguez, Pedro; Müller, Torsten
Report
2015Damage behaviour of fibre reinforced materials induced by high temperature oxidation for optimisation of thermal recycling routes
Manis, F.; Wölling, J.; Drechsler, K.
Conference Paper
2015Deflagration-detonation experiments of sensitized mixtures of ammonium or urea nitrates and an energetic thermoplastic elastomer
Quaresma, J.; Keicher, Thomas; Pineiro, M.; Deimling, Lukas; Campos, Jose; Krause, Horst
Conference Paper
2015Detection and modelling of thermal and rheological transitions of a 2-step-curing thermoset using dielectric and standard measuring techniques
Chaloupka, A.; Bezerra, R.; Madaksira, V.; Taha, I.; Rudolph, N.M.
Conference Paper
2015Development of a novel experimental DEMS set-up for electrocatalyst characterization under working conditions of high temperature polymer electrolyte fuel cells
Niether, C.; Rau, M.S.; Cremers, C.; Jones, D.J.; Pinkwart, K.; Tübke, J.
Journal Article
2015Development of a pure oxygen fuel cell system for an autonomous underwater vehicle with focus on fuel starvation due to inert gas accumulation on the anode
Hitscherich, M.; Cremers, C.; Stolten, D.; Pinkwart, K.; Tübke, J.
Conference Paper
2015Development of an innovative heat storage system for combined heat and power plants (CHP)
Merkel, S.; Epple, Boris; Simsek A.; Kollmeier, H.P.; Eckl, W.; Pappert, Sandra; Elsner, Peter
Abstract
2015Development of anodic materials for HT-PEMFCs with high tolerance to H2S
Rau, M.; Cremers, C.; Tübke, J.
Journal Article
2015Development of materials for anion-exchange membrane direct alcohol fuel cells
Jurzinsky, T.; Cremers, C.; Jung, F.; Pinkwart, K.; Tübke, J.
Journal Article
2015Direct generation of titanium dioxide nanoparticles dispersion under supercritical conditions for photocatalytic active thermoplastic surfaces for microbiological inactivation
Zydziak, Nicolas; Ambrosio Zanin, Maria-Helena; Trick, Iris; Hübner, Christof
Journal Article
2015Dithionite/air direct ion liquid fuel cell
Noack, J.; Tübke, J.; Pinkwart, K.
Journal Article
2015Dose response relations of PP
Reichert, Thomas; Müller, Axel; Vatahska, Teodora; Manier, Gerhard; Schönlein, Artur; Geburtig, A.; Zäh, Matthias
Conference Paper
2015Effect of curing agents and plasticizers on the loss factor curves of HTPB-binders quantified by modelling
Seyidoglu, Tijen; Bohn, Manfred A.
Conference Paper
2015The effect of plasticizers on the glass-to-rubber behavior of Desmophen® 2200 based elastomers used for composite propellants
Lemos, Mauricio Ferrapontoff; Bohn, Manfred A.
Conference Paper
2015Effect of surface treatment for metallic z-reinforcements on interlaminar fracture toughness of CFRP/CFRP joints
Jürgens, M.; Kurtovic, A.; Mertens, T.; Nogueira, A.C.; Lang, H.; Kolb, M.; Strobach, P.; Hombergsmeier, E.; Drechsler, K.
Conference Paper
2015Effects of radiation on the flame front of hydrogen air explosions
Keßler, Armin; Wassmer, Conrad; Knapp, Sebastian; Weiser, Volker; Sachsenheimer, K.; Raab, Angelika; Langer, Gesa; Eisenreich, Norbert
Presentation
2015Electrical buffer storage for energy harvesting
Hahn, R.; Möller, K.-C.
Book Article
2015Electrocatalyst for direct alcohol fuel cells
Cremers, Carsten; Jurzinsky, Tilman; Bach Delpeuch, A.; Niether, C.; Jung, Florina; Pinkwart, Karsten; Tübke, Jens
Conference Paper
2015Energetic materials - performance, safety and system applications
 
Conference Proceedings
2015Evaluation of the effect of plasticizers on the DMA loss factor, the thermal and mechanical properties of Desmophen® 2200 based elastomers used for composite propellants
Lemos, Mauricio Ferrapontoff; Bohn, Manfred A.
Conference Paper
2015EXPEDIA - a new EU project aiming to reduce threats from homemade explosives
Keicher, Thomas; Hafner, Sven; Krause, Horst; Östmark, Henric; Kölhed, Malin; Krumlinde, Patrik
Conference Paper
2015Experimental and theoretical comparison of a systematic variety of thermite compositions
Weiser, Volker; Roth, Evelin; Kelzenberg, Stefan; Becker, Wolfgang; Sachsenheimer, K.
Conference Paper
2015Experimental determination of heat-dynamics of a zeolite bedding
Hakspiel, Fabian; Pappert, Sandra; Teipel, Ulrich; Eckl, Wilhelm
Abstract
2015Experimental determination of heat-dynamics of a zeolite bedding in a plug flow reactor
Hakspiel, Fabian; Pappert, Sandra; Teipel, Ulrich; Eckl, Wilhelm
Abstract
2015Experimentelle Charakterisierung des Einflusses verschiedener Bindersysteme auf die Permeabilität des Preforms bei der RTM-Fertigung
Magagnato, D.; Thoma, B.; Henning, F.
Journal Article
2015Fraunhofer-Institut für Chemische Technologie. Jahresbericht 2014/2015
 
Annual Report
2015FRP parts for internal combustion engines
Berg, L.-F.
Journal Article
2015Fuel cells as range extender or auxiliary power unit for electric vehicles
Cremers, C.; Hitscherich, M.; Ries, P.; Niedergesäß, A.; Rau, M.S.; Pinkwart, K.; Tübke, J.
Conference Paper
2015Germany gets on Eco Design for aircraft end-of-life strategy
Wimmer, A.-K.
Conference Paper
2015Gewebe mit Polymerschicht
Schmid, Helmut; Eisenreich, Norbert; Homa, Peter
Patent
2015Herstellung von Aminen aus Alkoholen mittels heterogener Katalysatoren
Späth, Sarah
: Kowollik, K. (Betreuer); Flick, K. (Betreuer)
Master Thesis
2015High energy density amorphous silicon anodes for lithium ion batteries deposited by DC sputtering
Farmakis, F.; Elmasides, C.; Fanz, P.; Hagen, M.; Georgoulas, N.
Journal Article
2015High-pressure resin injection - Key technology for large-scale production
Graf, M.; Chaudhari, R.
Conference Paper
2015High-temperature polymer electrolyte membrane based direct ethanol fuel cell
Cremers, C.; Niether, C.; Delpeuch, A.B.; Ries, P.; Jung, F.; Pinkwart, K.; Tübke, J.
Conference Paper
2015Highly active carbon supported palladium-rhodium PdXRh/C catalysts for methanol electrooxidation in alkaline media and their performance in anion exchange direct methanol fuel cells (AEM-DMFCs)
Jurzinsky, Tilman; Bär, R.; Cremers, Carsten; Tübke, Jens; Elsner, Peter
Journal Article
2015An holistic evaluation of the state of the art and future developments on non-lethal microwave systems
Valente, F.; Paulissen, P.; Neutz, J.; Urban, H.; Roland-Price, A.
Conference Paper
2015Hot-Spot modelling of propellant regression. Part 2
Knapp, Sebastian; Eisenreich, Norbert; Kelzenberg, Stefan; Weiser, Volker
Conference Paper
2015Hot-spot modelling of thermite mixtures
Knapp, Sebastian; Weiser, V.; Kelzenberg, S.; Roth, E.; Eckl, W.
Conference Paper
2015Hyperspectral imaging of pyrotechnical decoys
Schreiber, Achim; Klahn, Thorsten; Zilly, Andreas; Deimling, Lukas
Conference Paper
2015Impact of HP-RTM process parameters on mechanical properties using epoxy and polyurethane
Swentek, I.; Beck, B.; Ugresic, V.; Potyra, T.; Henning, F.
Conference Paper
2015Improvement of polymer films in terms of barrier properties using nanotechnology
Schmid, Helmut
Conference Paper
2015The influence of different nitrocelluloses on the interaction in a binder-plasticizer system
Mitró, Daniel; Böhnlein-Mauß, Jutta
Conference Paper
2015Influence of different plasticizers on the glass transition temperature of mixtures with energetic thermoplastic elastomers
Böhnlein-Mauß, Jutta; Mitró, Daniel; Helfrich, Mathias
Conference Paper
2015Influence of H- and OH-adsorbates on the ethanol oxidation reaction
Delpeuch, A.B.; Chatenet, M.; Rau, M.S.; Cremers, C.
Journal Article
2015Influence of surface treatment and design of 3D-reinforcements on delamination resistance & mechanical properties of CFRP/CFRP joints under static & fatigue loading
Juergens, M.; Kurtovic, A.; Mertens, T.; Kolb, M.; Greitemeier, D.; Lang, H.; Hombergsmeier, E.; Drechsler, K.
Conference Paper
2015Influence of the temperature for the ethanol oxidation reaction (EOR) on Pt/C, Pt-Rh/C and Pt-Rh-SnO2/C
Delpeuch, A.B.; Asset, T.; Chatenet, M.; Cremers, C.
Journal Article
2015Inhibitors for non-lethal anti-material applications
Armbrust, Torsten; Rozincsak, Linda; Klemenz, Melanie; Hummel, Marc; Bernewitz, Johanna; Neutz, Jochen
Conference Paper
2015Insensitive, high-performance explosives
Herrmann, M.
Journal Article
2015Interaction energies between binder polymers and crystalline surfaces in composite materials determined by solution microcalorimetry and computer simulation
Nardai, Michael M.; Bohn, Manfred A.
Abstract
2015Investigation of rotating pyrotechnical decoy in realistic air flow with authentic ignition
Deimling, Lukas; Billeb, G.; Klahn, Thorsten; Schreiber, Achim; Zilly, Andreas
Conference Paper
2015Investigations on injection molded, glass-fiber reinforced polyamide 6 integral foams using breathing mold technology
Roch, A.; Kehret, L.; Huber, T.; Henning, F.; Elsner, P.
Conference Paper
2015IP-Schutzart IPX9 / IPX9K
Rühle, Steffen; Cäsar, Joachim
Conference Paper
2015Kombination von turbidimetrischer Methode mit Verfahren der 369 multivariaten Datenanalyse zur Charakterisierung von Nanokompositen
Guschin, V.; Becker, W.; Mikonsaari, I.; Weiss, P.; Günthner, C.; Eickershoff, B.; Kölle, S.; Maier, S.; Llorens-Chiralt, R.
Conference Paper
2015Lithium-sulfur cells: The Gap between the state-of-the-art and the requirements for high energy battery cells
Hagen, Markus; Hanselmann, Dominik; Ahlbrecht, Katharina; Maça, Rudi; Gerber, D.; Tübke, Jens
Journal Article
2015Localisation of IED manufacturing facilities by detection of explosives in sewage water
Schnürer, Frank; Heil, Moritz; Rieger, Max; Eberhardt, Angelika; Aniol, Jasmin; Krause, Horst
Conference Paper
2015Low temperature, high energy density non-aqueous Redox Flow Battery
Herr, T.; Fischer, P.; Tübke, J.; Pinkwart, K.; Elsner, P.
Conference Paper
2015Machbarkeitsstudie zur Materialsubsitution von Stahl und Aluminium durch Sheet Moulding Compound (SMC) am Beispiel eines Automobilkarosseriebauteils
List, Jonas
: Henning, Frank; Keckl, Christoph (Projektleiter)
Master Thesis
2015MAI ENVIRO. Vorstudie zur Lebenszyklusanalyse mit ökobilanzieller Bewertung relevanter Fertigungsprozessketten für CFK-Strukturen
Hohmann, Andrea; Schwab, Bernhard; Wehner, Daniel; Albrecht, Stefan; Ilg, Robert; Schüppel, Denny; Reden, Tjark von
Study
2015Manufacturing of complex shape composite parts through the combination of pull-braiding and blow moulding
Bezerra, R.; Wilhelm, F.; Strauß, S.; Ahlborn, H.
Conference Paper
2015Metal Organic Frameworks (MOFs): Time for a breakthrough in material supply
Polyzoidis, A.; Schwarzer, M.; Loebbecke, S.; Piscopo, C.G.
Journal Article
2015Metal organic frameworks as selective preconcentrator material for gas-phase sensing
Rieger, Max; Heil, Moritz; Hürttlen, Jürgen; Schnürer, Frank; Bunte, Gudrun; Krause, Horst
Conference Paper
2015Methodische Umsetzung und Bewertung eines neuartigen Prozesses zur lokalen und automatisierten Fixierung von textilen Preformlingen
Thoma, Bernd
Dissertation
2015Microstructure of energetic thermoplastic elastomers investigated by means of x-ray diffraction
Herrmann, Michael; Förter-Barth, Ulrich; Keicher, Thomas
Conference Paper
2015Microstructure of the HMX-Based PBX KS32 after Mechanical Loading
Herrmann, Michael; Förter-Barth, Ulrich; Bohn, Manfred A.; Krause, Horst; Koch, Michael; Werner, Arnold
Journal Article
2015Model-based development of a holistic thermal management system for an electric car with a high temperature fuel cell range extender
Fischer, Torben; Götz, Florian; Berg, Lars Fredrik; Kollmeier, Hans-Peter; Gauterin, Frank
Conference Paper
2015Modelling of loss factor curves obtained by Torsion-DMA of HTPB and GAP based binders manufactured with different curing agents and plasticizers
Seyidoglu, Tijen; Bohn, Manfred A.
Conference Paper
2015Modelling of loss factors of elastomer binders of high explosive charges and composite rocket propellants to separate binder fractions with different molecular mobility used to follow ageing
Bohn, Manfred A.
Conference Paper
2015Molding tools without sealing gaskets
Fürst, Tobias; Huber, Timo; Kuppinger, Jan; Henning, Frank
Journal Article
2015Monitoring of bond-line stresses in case-bonded composite rocket propellants
Mußbach, Günter; Bohn, Manfred A.
Conference Paper
2015Multi-modal dense sphere packing algorithm for the simulation of thermites
Günthner, Christian; Knapp, Sebastian; Weiser, Volker
Conference Paper
2015Nanoporöse Multitalente
Polyzoidis, Angelos; Piscopo, Calogero Giancarlo; Löbbecke, Stefan
Journal Article
2015Nanosilber-Systemtechnologie zur Vermeidung mikrobieller Materialzerstörung
Schmid, Helmut
Conference Paper
2015Near infrared spectroscopy as a tool for in-line control of process and material properties of PLA biopolymer
Becker, Wolfgang; Inone-Kauffmann, Emilia R.; Eckl, Wilhelm; Eisenreich, Norbert
Journal Article
2015Neue Elektrolyte zur Steigerung der Energiedichte einer nicht-wässrigen Vanadium-Acetylacetonat-Redox-Flow-Batterie
Herr, Tatjana
Dissertation
2015New approaches to the CL-20/HMX cocrystal a less sensitive high power explosive
Herrmannsdörfer, Dirk; Herrmann, Michael; Heintz, Thomas
Conference Paper
2015A new eye-safe UV Raman spectrometer for the remote detection of energetic materials in fingerprint concentrations: Characterization by PCA and ROC analyzes
Almaviva, S.; Chirico, R.; Nuvoli, M.; Palucci, A.; Schnurer, F.; Schweikert, W.
Journal Article
2015A new mixing technology for plastic bonded explosives
Gerber, Peter; Happ, Andreas
Conference Paper
2015Non-destructive method to follow ageing of solid propellant in rocket motors
Mußbach, Günter; Bohn, Manfred A.
Conference Paper
2015A novel low-cost pre-concentrator concept to boost sensitivity and selectivity of gas sensor systems
Schütze, A.; Leidinger, M.; Schmitt, B.; Sauerwald, T.; Rieger, M.; Alepee, C.
Conference Paper
2015Novel theoretical and computer-assisted modeling of isothermal and non-isothermal depolymerization kinetics
Bigger, S.W.; Cran, M.J.; Bohn, M.A.
Journal Article
2015On the mechanism of zirconium nitride formation by zirconium, zirconia and yttria burning in air
Malikova, E.; Pautova, J.; Gromov, A.; Monogarov, K.; Larionov, K.; Teipel, U.
Journal Article
2015Pair distribution function analysis of ammonium nitrate - evaluation of measuring systems for energetic materials
Kempa, Paul-Bernd; Herrmann, Michael
Conference Paper
2015Parameterstudie zur thermochemischen Zersetzung organischer Materialien in geschmolzenen Salzen
Nieberl, Martin
Bachelor Thesis
2015Phase change detection in neat and fiber reinforced polyamide 6 using dielectric analysis
Chaloupka, A.; Wedel, A.; Taha, I.; Rudolph, N.; Drechsler, K.
Conference Paper
2015Polypropylene numerical photoageing simulation by dose - response functions with respect to irradiation and temperature
Geburtig, A.; Wachtendorf, Volker; Trubiroha, Peter; Zäh, Matthias; Schönlein, Artur; Müller, Axel; Vatahska, Teodora; Manier, Gerhard; Reichert, Thomas
Book Article
2015Polyurethanes with components made of renewable resources and recyclates
Anders, T.
Presentation
2015Post-Lithium-Ionen-Batterien
Tübke, J.; Hagen, M.
Book Article
2015Preparation and characterization of foamed propellants using supercritical fluids
Kröber, Hartmut; Böhnlein-Mauß, Jutta
Conference Paper
2015Presswerkzeuge ohne Dichtung
Fürst, Tobias; Huber, Timo; Kuppinger, Jan; Henning, Frank
Journal Article
2015ProCycle. Analyse und toxikologische Bewertung von Stäuben aus Recycling- und Verwertungsprozessen von Nanocomposites und Strategien zur Gefährdungsminimierung
Guschin, Viktor; Marioth, Eric
Presentation
2015Produktgestaltung in der Partikeltechnologie. Bd.7
: Teipel, Ulrich
Conference Proceedings
2015Propellants
Gettwert, V.; Bohn, M.A.; Schubert, H.
Book Article
2015Protecting the structural integrity of composites in fire: Intumescent coatings in the intermediate scale
Hörold, A.; Schartel, B.; Trappe, V.; Gettwert, V.; Korzen, M.
Journal Article
2015Pyroorganic flares - state of the art and progress
Weiser, Volker; Roth, Evelin; Raab, Angelika; Knapp, Sebastian; Kelzenberg, Stefan; Eckl, Wilhelm
Conference Paper
2015Rankine cycle for hybrid vehicles: The potential for CO2 emissions reduction
Kraljevic, I.; Kollmeier, H.-P.; Spicher, U.
Conference Paper
2015Recomat-spectrometric application
Klahn, Thorsten; Zilly, Andreas; Schreiber, Achim; Deimling, Lukas
Conference Paper
2015Results from miniaturized directed acoustic arrays
Armbrust, Torsten; Krebs, Heinrich; Neutz, Jochen; Walschburger, Erik; Eisenreich, Norbert
Conference Paper
2015Review of some peculiarities of the stability and decomposition of HNF and ADN
Bohn, Manfred A.
Conference Paper
2015Review of some peculiarities of the stability and decomposition of HNF and ADN
Bohn, Manfred A.
Conference Paper
2015Review on ICT's research on scalable non-lethal launchers and projectiles
Armbrust, Torsten; Krebs, Heinrich; Neutz, Jochen; Scholz, Peter; Thiel, Klaus-Dieter; Zettl, Sebastian
Conference Paper
2015Scale-up approaches for the ADN-prilling process by emulsion crystallization
Heintz, T.; Leisinger, K.; Roßmann, C.
Conference Paper
2015Schaum aus dem Gelben Sack
Schneider, Anja; Mack, Christoph; Rapp, Florian
Journal Article
2015Screening of natural lightweight fillers for sheet moulding compound in North America
Pierce, A.; Potyra, T.; Henning, F.
Conference Paper
2015Self-propagating combustion synthesis of nanostructured particles
Imiolek, Andreas; Weiser, Volker; Kelzenberg, Stefan; Roth, Evelin; Lity, André
Conference Paper
2015Sieving effects in electrical double-layer capacitors based on neat [Al(hfip)(4)](-) and [NTf2](-) ionic liquids
Roznyatovskaya, N.; Rupp, A.B.A.; Tübke, J.; Krossing, I.
Journal Article
2015Simulation and experimental validation of gaps and bridging in the automated fiber placement process
Lichtinger, R.; Lacalle, J.; Hinterhölzl, R.; Beier, U.; Drechsler, K.
Journal Article
2015Small scale motor tests of ADN/GAP based propellants
Gettwert, Volker; Fischer, Sebastian
Conference Paper
2015Stability and characterization of GAP bonded ADN-propellant - the problem of gas formation during curing with isocyanates and characteristics of the glass-rubber transition
Bohn, Manfred A.; Gettwert, Volker
Conference Paper
2015Stability of UiO-66 under acidic treatment: Opportunities and limitations for post-synthetic modifications
Piscopo, C.G.; Polyzoidis, A.; Schwarzer, M.; Loebbecke, S.
Journal Article
2015Stand und Perspektiven von Redox-Flow-Batterien als stationäre Speicherlösungen
Tübke, J.; Noack, J.; Wietschel, L.
Journal Article
2015Supported sulfonic acids: Solid catalysts for batch and continuous-flow synthetic processes
Piscopo, C.G.
Journal Article
2015Synthesis and characterization of nitrate based energetic ionic liquids (EILs)
Schaller, Uwe; Keicher, Thomas; Weiser, Volker; Krause, Horst
Conference Paper
2015Synthesis and test of suitable adsorbers for selectively trapping and detecting explosives and improvised explosives precursors from gasphase
Bunte, Gudrun; Hürttlen, Jürgen; Heil, Moritz; Rieger, Max; Krause, Horst
Conference Paper
2015Systematische Untersuchung thermischer Prozesse für das Recycling von kohlenstofffaserverstärkten Kunststoffen
Benka, Christopher
: Manis, Frank (Betreuer)
Bachelor Thesis
2015Thermodynamic derivation of open circuit voltage in vanadium redox flow batteries
Pavelka, M.; Wandschneider, F.; Mazur, P.
Journal Article
2015Thermogravimetric study on the reaction of magnesium and aluminum in nitrogen
Kuchenreuther-Hummel, V.; Rozincsak, Linda; Neutz, Jochen
Conference Paper
2015Thermoplastic composites in structural lightweight applications
Huber, T.; Henning, F.; Menrath, A.; Heinzle, V.
Conference Paper
2015Trace gas VOC detection using metal-organic frameworks as pre-concentrators and semiconductor gas sensors
Leidinger, M.; Rieger, M.; Weishaupt, D.; Sauerwald, T.; Nägele, M.; Hürttlen, J.; Schütze, A.
Journal Article, Conference Paper
2015Über 300.000 Kilometer unter Strom
Stella, Kevin; Wollersheim, Olaf; Fichtner, Wolf; Jochem, Patrick; Schücking, Maximilian; Nastold, Max; Ensslen, Axel; Wietschel, Martin; Held, Michael; Gnann, Till; Friedmann, Michael; Graf, Roberta; Wohlfarth, Katharina
Report
2015Untersuchungen an a-C:H:Me beschichteten Substraten zur Eignung als alternatives Bipolarplattenmaterial für wässrige Vanadium Redox-Flow Batterien
Richards, Justin
Dissertation
2015A vanadium redox flow battery for uninterruptible power supply applications
Buczkowski, T.; Noack, J.; Fischer, P.; Tübke, J.; Pinkwart, K.
Conference Paper
2015Verbundvorhaben: Bioschaumplatten - Extrusionsgeschäumte, dickwandige Plattenelemente aus einem biobasierten, thermoplastischen Kunststoff
Wodke, Thomas; Rapp, Florian; Basler, Aaron; Maga, Daniel
: Erdmann, Rafael
Report
2015Verfahren zur Gewinnung von aromatischen Verbindungen
Forstner, Jochen; Unser, Steffen; Schweppe, Rainer
Patent
2015Verfahren zur Herstellung thermoplastischer Verbundbauteile
Wendel, Rainer; Arik, Cahit; Henning, Frank
Patent
2015Verfahren zur Herstellung von Propen aus Propanol
Forstner, Jochen; Unser, Steffen; Böringer, Sarah
Patent
2015Verfahren zur Konsolidierung von thermoplastitschen oder thermoelastischen Faserverbundstrukturen
Baumgärtner, Sebastian; Heinzle, Volker; Lohr, Christoph; Henning, Frank; Rampf, Wolf-Georg
Patent
2015Verfahren zur Rückgewinnung von Wärme aus Verbrennungsmotoren sowie zur Umwandlung der rückgewonnenen Wärme in mechanische Energie
Kollmeier, Hans-Peter; Kraljevic, Ivica; Rohrpasser, Christian; Striebich, Helmut
Patent
2015Verkürzung von Prozessketten am Beispiel des Direkt-SMC-Prozesses
Keckl, C.
Conference Paper
2015Wetting of oxidizer particles by binder and plasticizer molecules - microcalorimetry experiments and computer simulations
Nardai, Michael M.; Bohn, Manfred A.
Conference Paper
2015Widely tuneable quantum cascade lasers for spectroscopic sensing
Wagner, J.; Ostendorf, R.; Grahmann, Jan; Merten, André; Hugger, S.; Jarvis, J.P.; Fuchs, F.; Boskovic, D.; Schenk, Harald
Conference Paper
2015X-Bond - Entkleben unter Nutzung exothermer Reaktionen
Winkel, A.; Kahlmeyer, M.; Böhm, S.; Sims, S.; Gettwert, V.; Urban, H.
Conference Paper
20143. Symposium Rohstoffeffizienz und Rohstoffinnovationen 2014
: Teipel, Ulrich; Reller, Armin
Conference Proceedings
20143D tomographic characterization of sandwich structures
Dietrich, S.; Weidenmann, K.; Elsner, P.
Journal Article
2014Activation energies for the decomposition of nitrate ester groups at the anhydroglucopyranose ring positions C2, C3 and C6 of nitrocellulose using the nitration of a dye as probe
Moniruzzaman, Mohammed; Bellerby, John M.; Bohn, Manfred A.
Journal Article
2014Aging of ADN rocket propellant formulations with desmophen®-based elastomer binder
Cerri, S.; Bohn, M.A.; Menke, K.; Galfetti, L.
Journal Article
2014Alt-Handy-Recycling - Eine neue Rohstoffquelle
Teipel, U.; Wolf, S.; Köpnick, H.; Bischlager, O.; Daehn, C.
Conference Paper
2014Aluminum nanoparticles application to energetic systems - new horizons or sunset?
Gromov, Alexander; Teipel, Ulrich; Luca, L. de
Conference Paper
2014Application of micro-Raman spectroscopy for fight against terrorism and smuggling
Almaviva, S.; Botti, S.; Palucci, A.; Puiu, A.; Schnürer, F.; Schweikert, W.; Romolo, F.S.
Journal Article
2014Atomistic simulation of the temperature dependence of density and van-der-Waals interactions of binders, plasticizers and mixtures of them
Bohn, Manfred A.; Evangelisti, Camilla; Klapötke, Thomas M.
Conference Paper
2014Atomistic simulation of the temperature dependence of density and van-der-Waals interactions of binders, plasticizers and mixtures of them
Bohn, Manfred A.; Evangelisti, Camilla; Klapötke, Thomas M.
Conference Paper
2014Aufbereitung nachwachsender Rohstoffe durch Zerkleinerung
Eisenlauer, M.; Teipel, U.
Abstract
2014Aufbereitung von sekundären mineralischen Baustoffen
Teipel, U.
Journal Article
2014Benetzungsverhalten von Kohlenstoff-Nanoröhren
Dresel, A.; Teipel, U.
Journal Article
2014Benetzungsverhalten von Kohlenstoffnanoröhren
Dresel, A.; Teipel, U.
Journal Article
2014Benetzungsverhalten von mineralischen Sekundärrohstoffen
Hennig, M.; Teipel, U.
Conference Paper
2014Biopolymer foams - relationship between material characteristics and foaming behavior of cellulose based foams
Rapp, F.; Schneider, A.; Elsner, P.
Conference Paper
2014Bodengranulat zur reversiblen Speicherung von Wasser und Verfahren zu dessen Herstellung
Schmid, Helmut; Narayana, Ida-Bagus Kesawa; Braun, Monika
Patent
2014Brennkraftmaschine und Verfahren zu ihrem Betrieb
Schwaibold, Steffen; Fischer, Michael; Kraljevic, Ivica
Patent
2014Burning behaviour of aluminium and its hydride in an ADN/GAP-matrix
Franzin, Andrea; Weiser, Volker; Gettwert, Volker; Luca, L. de; Roth, Evelin; Kelzenberg, Stefan; Poth, H.; Bieroth, D.
Conference Paper
2014Burning behaviour of B/KDN-mixtures compared with B/KNO3
Weiser, Volker; Lity, André; Kelzenberg, Stefan; Koleczko, Andreas; Roth, Evelin; Schaller, Uwe; Walschburger, Erik
Conference Paper
2014Cell energy density and electrolyte/sulfur ratio in Li-S cells
Hagen, M.; Fanz, P.; Tübke, J.
Journal Article
2014Chain alignment for improved properties - optimization of PLA and PHB-V by crystallization and reinforcement
Moser, K.; Bergmann, B.; Diemert, J.; Elsner, P.
Conference Paper
2014Characterisation of enhanced blast formulations with different methods
Gerber, Peter; Aurich, Hagen; Happ, Andreas; Sättler, Axel
Conference Paper
2014Characterization of ADN/GAP-based and ADN/desmophen-based propellant formulations and comparison with AP analogues
Cerri, Sara; Bohn, Manfred A.; Menke, Klaus; Galfetti, Luciano
Journal Article
2014Characterization of high-pressure resin transfer molding process variants for manufacturing high-performance composites
Chaudhari, Raman
Dissertation
2014Charakterisierung von Bariumstrontiumtitanat-Partikeln mithilfe der Röntgenbeugung
Herrmann, Michael; Förter-Barth, Ulrich; Roßmann, Christian; Teipel, Ulrich
Journal Article
2014Combustion Features of ADN-Based Solid Rocket Propellants for Space Applications
Luca, L.T. de; Palmucci, I.; Franzin, A.; Trache, D.; Pang, W.-Q.; Weiser, V.
Conference Paper
2014Comparison of experimental and theoretical pair distribution functions of ammonium nitrate
Kempa, Paul-Bernd; Herrmann, Michael
Conference Paper
2014Compressibility and permeability of fiber reinforcements for pultrusion
Bezerra, R.; Wilhelm, F.; Henning, F.
Conference Paper
2014Conductive polymer composites and coated metals as alternative bipolar plate materials for all-vanadium redox-flow batteries
Caglar, B.; Richards, J.; Fischer, P.; Tuebke, J.
Journal Article
2014Continuous supercritical hydrothermal synthesis of iron oxide nanoparticle dispersions and their characterization
Daschner de Tercero, M.; Röder, C.; Fehrenbacher, U.; Teipel, U.; Türk, M.
Journal Article
2014A coupled-physics model for the vanadium oxygen fuel cell
Wandschneider, F.T.; Küttinger, M.; Noack, J.; Fischer, P.; Pinkwart, K.; Tübke, J.; Nirschl, H.
Journal Article
2014Deflagration And Detonation Of Mixtures Of Ammonium Or Urea Nitrates With An Energetic Thermoplastic Elastomer
Quaresma, J.; Pineiro, M.; Campos, J.; Keicher, T.; Krause, H.
Conference Paper
2014Detonation measurements using single optical fibers
Campos, Jose; Mendes, R.; Quaresma, J.; Anastacio, A.; Keicher, Thomas; Deimling, Lukas; Krause, Horst
Conference Paper
2014Development and characterization of a 280 cm2 vanadium/oxygen fuel cell
Noack, J.; Cremers, C.; Bayer, D.; Tübke, J.; Pinkwart, K.
Journal Article
2014The development of a modular synthesis of teraryl-based alpha-helix mimetics as potential inhibitors of protein-protein interactions
Trobe, M.; Peters, M.; Grimm, S.H.; Breinbauer, R.
Journal Article
2014Development of anodic materials with elevated hydrogen sulfide tolerance for HT-PEMFCs using reformat
Rau, M.S.; Cremers, C.; Pinkwart, K.; Tübke, J.
Conference Paper
2014Development of carbon nanotube and graphite filled polyphenylene sulfide based bipolar plates for all-vanadium redox flow batteries
Caglar, B.; Fischer, P.; Kauranen, P.; Karttunen, M.; Elsner, P.
Journal Article
2014Development of graphite and carbon nanotube filled thermoplastic based bipolar plates for all-vanadium redox flow batteries
Caglar, Burak
Dissertation
2014Druckfiltration von Kohlenstoffnanoröhren-Suspensionen
Dresel, A.; Teipel, U.
Journal Article
2014Eine dufte Technik
Just, D.; Diemert, J.
Journal Article
2014Dynamisch-physikalische Modellierung von Siebklassierprozessen
Hennig, M.; Elskamp, F.; Kruggel-Emden, H.; Teipel, U.
Journal Article
2014Dynamische Modellierung von Siebklassierprozessen
Hennig, M.; Teipel, U.
Abstract
2014Effect of boron addition on micro-aluminum-particle-based multifunctional high-temperature coatings
Roussel Garcia, Raquel; Kolarik, Vladislav; Juez-Lorenzo, Maria; Fietzek, Harald
Journal Article
2014Effect of mobile phone radiation on the human body and textile remedies
Roy, T.; Govekar, A.; Rajpurohit, A.
Journal Article
2014Effiziente Recyclingverfahren für Altbatterien
Kross, S.; Teipel, U.; Würfel, K.
Journal Article
2014Effizientes Rohstoffrecycling? Beurteilung von Verfahrenstechnologien zur Verwertung von Lithiumbatterien und -akkumulatoren
Würfel, K.; Kross, S.; Teipel, U.
Conference Paper
2014Einfluss lokaler Endlosfaserverstärkungen auf das Eigenschaftsprofil struktureller Spritzgießbauteile
Huber, Timo
Dissertation
2014Electrooxidation of ethanol at room temperature on carbon-supported Pt and Rh-containing catalysts: A DEMS study
Bach Delpeuch, A.; Asset, T.; Chatenet, M.; Cremers, C.
Journal Article
2014Elektrische Leitfähigkeit von Polypropylen-CNT-Kompositbauteilen in Abhängigkeit des Kristallisationsgrades
Imiolek, A.I.; Guschin, V.G.; Becker, W.B.; Weiss, P.W.; Teipel, U.T.
Journal Article
2014Elektrochemische Detektion von Explosivstoffen im Meer
Rabenecker, P.; Pinkwart, K.
Book Article
2014Elektrochemischer Gassensor, Verfahren zu dessen Herstellung und dessen Verwendung
Baltes, Norman; Pinkwart, Karsten; Fischer, Peter
Patent
2014Energetic Materials. Particles, Processing, Applications
 
Conference Proceedings
2014Entwicklung eines Ecodesign-Tools für die Luftfahrtindustrie
Wimmer, A.-K.; Salles, A.; Müller, T.
Conference Paper
2014Entwicklung eines Ecodesign-Tools für die Luftfahrtindustrie
Wimmer, A.-K.; Salles, A.; Müller, T.
Conference Paper
2014Environmentally-friendly, heat-resistant profiles
Moser, Kevin; Holzer, Andrei; Bergmann, Björn
Journal Article
2014Evaluation of GA/BAMO-copolymer binder for AL/AP-based propellants
Gettwert, Volker; Keicher, Thomas; Franzin, Andrea; Jung, Marcus; Weiser, Volker
Conference Paper
2014Evaluation of process induced residual stresses in continuous fiber-reinforced hybrid thermoplastic composites
Paul, H.; Schweizer, F.; Hangs, B.
Conference Paper
2014Even lighter
Keckl, Christoph; Kuppinger, Jan; Henning, Frank
Journal Article
2014Eye-safe UV Raman spectroscopy for remote detection of explosives and their precursors in fingerprint concentration
Almaviva, S.; Angelini, F.; Chirico, R.; Palucci, A.; Nuvoli, M.; Schnuerer, F.; Schweikert, W.; Romolo, F.S.
Conference Paper
2014Foam-injected sandwich panels with continuous-reinforced facings
Menrath, A.; Henning, F.; Huber, T.; Roch, A.; Riess, C.
Conference Paper
2014Foreword
Manelis, G.; Schubert, H.
Journal Article
2014Future flare compositions
Lingen, J.N.J. van; Meuken, D.; Hackspik, M.M.; Mäkeläinen, T.; Weiser, V.; Poulson, G.W.
Conference Paper
2014Generation of very fine ammonium dinitramide (ADN) paricles by bead milling technology
Roßmann, Christian; Heintz, Thomas; Herrmann, Michael
Conference Paper
2014Gewinnung Mikrofibrillierter Cellulose (MFC) durch mechanischen Aufschluss
Köster, A.; Förter-Barth, U.; Herrmann, M.; Schweppe, R.; Teipel, U.
Conference Paper
2014Handy clever entsorgen
Gantner, O.; Köpnick, H.; Bischlager, O.; Teipel, U.; Hagelüken, C.; Reller, A.
Conference Paper
2014Heat storage by zeolites: A small scale demonstration
Elsner, Peter; Epple, Boris; Kollmeier, H.P.; Merkel, S.; Simsek A.; Eckl, Wilhelm; Pappert, Sandra; Neutz, Jochen
Abstract
2014Herstellung von Nanocellulose durch mechanischen Aufschluss
Köster, Alexander; Förter-Barth, Ulrich; Herrmann, Michael; Schweppe, Rainer; Teipel, Ulrich
Journal Article
2014Hexamethoxycyclotriphosphazene as a flame retardant for polyurethane foams
Käbisch, B.; Fehrenbacher, U.; Kroke, E.
Journal Article
2014High-voltage ignition of thermite deposits
Knapp, Sebastian; Weiser, Volker; Kelzenberg, Stefan; Roth, Evelin; Raab, Angelika; Eckl, Wilhelm
Conference Paper
2014Holistic and consistent design process for hollow structures based on braided textiles and RTM
Gnädinger, Florian; Karcher, Michael; Henning, Frank; Middendorf, Peter
Journal Article
2014Hot-spot modelling of propellant regression
Knapp, Sebastian; Eisenreich, Norbert; Kelzenberg, Stefan; Weiser, Volker
Conference Paper
2014HTPB bonded pyro-organic spectral flares
Roth, Evelin; Weiser, Volker; Raab, Angelika; Lity, André
Conference Paper
2014Hydrothermal carbonization (HTC): Near infrared spectroscopy and partial least-squares regression for determination of selective components in HTC solid and liquid products derived from maize silage
Reza, M.T.; Becker, W.; Sachsenheimer, K.; Mumme, J.
Journal Article
2014ICT-cellular-combustion-algorithm (ICCA) application to the combustion of complex shaped propellants
Wurster, Sebastian; Fischer, Thomas
Conference Paper
2014Ignition of hydrogen jet fires from high pressure storage
Kessler, A.; Schreiber, A.; Wassmer, C.; Deimling, L.; Knapp, S.; Weiser, V.; Sachsenheimer, K.; Langer, G.; Eisenreich, N.
Journal Article
2014Improvement of mechanical properties by additive assisted laser sintering of PEEK
Kroh, M.; Bonten, C.; Eyerer, P.
Conference Paper
2014Improving composite process efficiency on a structural frame for a commercial truck storage door
Ruby, M.; Reif, M.; Begert, M.; Gerster, M.; Schneider, E.; Joppich, T.; Baumgärtner, S.
Conference Paper
2014Increasing the energy density of the non-aqueous vanadium redox flow battery with the acetonitrile-1,3-dioxolane-dimethyl sulfoxide solvent mixture
Herr, T.; Fischer, P.; Tübke, J.; Pinkwart, K.; Elsner, P.
Journal Article
2014Influence of an optimized 3D-reinforcement layout on the structural mechanics of co-bonded CFRP joints
Jürgens, M.; Nogueira, A.C.; Lang, H.; Hombergsmeier, E.; Drechsler, K.
Conference Paper
2014Influence of isothermal ageing on the mechanical properties of HTPB-bonded composite rocket propellants expressed as master curves of torsion DMA measurements
Mußbach, Günter; Bohn, Manfred A.
Conference Paper
2014Influence of isothermal ageing on the mechanical properties of HTPB-bonded composite rocket propellants expressed as master curves of torsion DMA measurements
Mußbach, Günter; Bohn, Manfred A.
Conference Paper
2014Inline-Prozessanalyse chemischer Mikroreaktionsprozesse mittels MIR-Laserspektroskopie
Boskovic, D.; Schweikert, W.; Panic, S.; Schwan, K.; Löbbecke, S.
Journal Article
2014Investigating cavity pressure behavior in high-pressure RTM process variants
Rosenberg, P.; Chaudhari, R.; Karcher, M.; Henning, F.; Elsner, P.
Conference Paper
2014Investigation of quality and reproducibility of foamed propellants
Böhnlein-Mauß, Jutta; Kröber, Hartmut
Conference Paper
2014Investigation of the effect of ageing of RDX containing HTPB and GAP bonded high explosive charges on their thermal and shock sensitivity
Bohn, Manfred A.; Borne, L.; Herrmann, Michael; Gerber, Peter; Kaiser, M.
Presentation
2014Investigation of the nitrate based EIL 4-Amino-1-methyl-1,2,4- triazolium nitrate as a plasticizer
Schaller, Uwe; Weiser, Volker; Keicher, Thomas; Krause, Horst
Conference Paper
2014Kategorisierung der Schülerlabore - Schülerlabor mit Berufsorientierung
Krause, D.; Martin, U.
Journal Article
2014Kohlenstofffasern wiedergewinnen
Emmerich, Rudolf; Kuppinger, Jan
Journal Article
2014Kontinuierliche Verfolgung von Fouling-Prozessen in Rohrreaktoren 229 mittels Wärmefluss-Sensorik
Antes, J.; Löbbecke, S.; Jentner, D.
Conference Paper
2014Lab2Venture – Unternehmerisches Denken und Handeln in Schülerlaboren
Parrisius, M.; Krause, D.
Journal Article
2014Leichtbau - Trends und Zukunftsmärkte und deren Bedeutung für Baden-Württemberg
: Thielmann, Axel; Seeliger, Wolfgang; Günther, Bele; Schneider, Marco (Red.); Birenbaum, Christoph (Red.); Stroka, Michael (Red.)
Study
2014Leichtbaupotenziale durch faserverstärkte Schäume
Roch, A.; Menrath, A.; Huber, T.
Journal Article
2014LFT foam - lightweight potential for semi-structural components through the use of long-glass-fiber-reinforced thermoplastic foams
Roch, A.; Huber, T.; Henning, F.; Elsner, P.
Conference Paper
2014Lightweight Wheel. Lightweight Wheel-Phase 2 1 and 2 1 ext
Bücheler, David
Report
2014Lignin matrix composites from natural resources - ARBOFORMR®
Nägele, H.; Pfitzer, J.; Ziegler, L.; Inone-Kauffman, E.R.; Eckl, W.; Eisenreich, N.
Book Article
2014Mapping nutrient resorption efficiencies of subarctic cryptogams and seed plants onto the Tree of Life
Lang, Simone I.; Aerts, Rien; Logtestijn, Richard S.P. van; Schweikert, W.; Klahn, Thorsten; Quested, Helen M.; Hal, Jürgen R. van; Cornelissen, Johannes H.C.
Journal Article
2014Mass spectrometric investigation of ethanol and acetaldehyde adsorbates electrooxidation on Pt electrocatalyst
Bach Delpeuch, A.; Chatenet, M.; Cremers, C.; Tübke, T.
Journal Article
2014Metal nanopowders : production, characterization, and energetic applications
: Gromov, A.; Teipel, U.
Book
2014Micro-morphology of nitrocellulose in gun propellants
Böhnlein-Mauß, Jutta; Helfrich, Mathias
Conference Paper
2014Microstructure of NC-propellants investigated by x-ray diffraction (Part II)
Herrmann, Michael; Förter-Barth, Ulrich; Kaiser, Manfred; Kupzik, Klaus; Scheibel, Rudolf
Conference Paper
2014Microwave heated beads as selective adsorbents for large volume sampling
Heil, Moritz; Hürttlen, Jürgen; Bunte, Gudrun; Krause, Horst
Conference Paper
2014Model of a vanadium redox flow battery with an anion exchange membrane and a Larminie-correction
Wandschneider, F.T.; Finke, D.; Grosjean, S.; Fischer, P.; Pinkwart, K.; Tübke, J.; Nirschl, H.
Journal Article
2014Modeling ignition and thermal wave progression in binary granular pyrotechnic compositions
Knapp, Sebastian; Weiser, Volker; Kelzenberg, Stefan; Eisenreich, Norbert
Journal Article
2014Modelling of the consumption of a dye used to probe the decomposition of nitrocellulose
Bohn, Manfred A.; Moniruzzaman, Mohammed; Bellerby, John
Presentation
2014Modification of the mechanical granule properties via internal structure
Eckhard, Susanna; Fries, Manfred; Teipel, Ulrich; Antonyuk, Sergiy; Heinrich, Stefan
Journal Article
2014Monitoring of reinforced composites processed by microwave radiation using fiber-Bragg gratings
Barrera, D.; Roig, I.; Sales, S.; Emmerich, R.
Conference Paper
2014A multi-stack simulation of shunt currents in vanadium redox flow batteries
Wandschneider, F.T.; Röhm, S.; Fischer, P.; Pinkwart, K.; Tübke, J.; Nirschl, H.
Journal Article
2014Multifunctional composites
Hübner, Christof
Journal Article
2014Multifunctional composites based on polypropylene with excellent electrical, thermal and structural properties
Hübner, C.; Sathyanarayana, S.
Conference Paper
2014Multiple headspace extraction for gas detection in ionic liquids
Müller, D.; Fühl, M.; Pinkwart, K.; Baltes, N.
Journal Article
2014Nanometals in energetic systems: Achievements and future
Gromov, A.; DeLuca, L.T.; Il'in, A.P.; Teipel, U.; Petrova A.; Prokopiev, D.
Journal Article
2014Neue Composite-Raketenfesttreibstoffe für taktische Raketenantriebe - rauchfrei, schnellbrennend und leistungsstark
Gettwert, V.; Keicher, T.; Heintz, T.; Weiser, V.
Book Article
2014Neue Verfahren zur Verwertung von Verbundwerkstoffen
Woidasky, Jörg M.
Conference Paper
2014New energetic thermoplastic elastomers for pressed explosive charges
Holler, Marcel; Keicher, Thomas; Gerber, Peter; Happ, Andreas; Klapötke, Thomas M.; Stierstorfer, Jörg
Conference Paper
2014New version of the ICT-thermodynamic code
Kelzenberg, Stefan; Kempa, Paul-Bernd; Wurster, Sebastian; Herrmann, Michael; Fischer, Thomas
Conference Paper
2014Nitration chemistry in continuous flow using acetyl nitrate
Antes, Jürgen; Janitschek, Wieland; Keicher, Thomas; Löbbecke, Stefan
Conference Paper
2014Noch weniger Gewicht
Keckl, Christoph; Kuppinger, Jan; Henning, Frank
Journal Article
2014Numerical investigation on the structural mechanics of a joining technique for composite materials: The redundant high efficiency assembly
Lang, H.; Nogueira, A.C.; Jürgens, M.; Hombergsmeier, E.; Drechsler, K.
Conference Paper
2014On the kinetics of AlH3 decomposition and the subsequent Al oxidation
Eisenreich, N.; Keßler, A.; Koleczko, A.; Weiser, V.
Journal Article
2014On-line vs off-line electrical conductivity characterization. Polycarbonate composites developed with multiwalled carbon nanotubes by compounding technology
Llorens-Chiralt, R.; Weiss, P.; Mikonsaari, I.
Conference Paper
2014Overview of the German gel propulsion technology program
Ciezki, H.K.; Negri, M.; Hürttlen, J.; Weiser, V.; Naumann, K.W.; Ramsel, J.
Conference Paper
2014Particle size adjustment of spherical ammonium dinitramide particles (ADN-Prills) produced by emulsion crystallization
Heintz, Thomas; Reinhard, Werner; Birke, Christoph; Leisinger, Karlfred
Conference Paper
2014Partikeltechnologie
Teipel, U.; Weber, A.
Journal Article
2014Passivation of Metal Nanopowders
Gromov, A.; Il'in, A.; Teipel, U.; Pautova, J.
Book Article
2014Polymere Flammschutzmittel, Verfahren zu deren Herstellung und flammgeschützte Polymersysteme
Barner, Leonie; Eisenblätter, Jördis; Fehrenbacher, Ulrich; Barner-Kowollik, Christopher; Lang, Christiane
Patent
2014Pretreatment of biogenic raw materials
Chairopoulou, M.A.; Eisenlauer, M.; Teipel, U.; Schweppe, R.
Conference Paper
2014Problems and faulty uses with the Prout-Tompkins description of autocatalytic reactions and the solutions
Bohn, Manfred A.
Journal Article
2014Process development of injection molded parts with wound fiber structures for local reinforcement
Heinzle, V.; Huber, T.; Henning, F.; Elsner, P.
Conference Paper
2014Process efficiency improvements for a structural doorframe support panel molded from unidirectional E-glass/polypropylene composite tapes
Eastep, D.; Reif, M.; Begert, M.; Gerster, M.; Schneider, E.; Joppich, T.; Baumgärtner, S.
Conference Paper
2014Produktgestaltung mit Sekundärrohstoffen aus der Baustoff- und Keramikindustrie
Teipel, U.
Conference Paper
2014Proximal detection of energetic materials on fabrics by UV-Raman spectroscopy
Chirico, R.; Almaviva, S.; Colao, F.; Fiorani, L.; Nuvoli, M.; Schweikert, W.; Schnürer, F.; Cassioli, L.; Grossi, S.; Mariani, L.; Angelini, F.; Menicucci, I.; Palucci, A.
Conference Paper
2014Pultrusion of flax/poly(lactic acid) commingled yarns and nonwoven fabrics
Linganiso, L.Z.; Bezerra, R.; Bhat, S.; John, M.; Braeuning, R.; Anandjiwala, R.D.
Journal Article
2014Quantification of local fiber distribution for optimization of tape laying techniques
Guglhoer, T.; Manger, F.; Sause, M.G.R.
Conference Paper
2014Raman Spectroscopy Study on the Addition of Peroxides as a Dispersing Additive in Multiwalled Carbone Nanotube Reinforced Polypropylene Composites
Sathyanarayana, S.; Olowojoba, G.; Hübner, C.; Diemert, J.; Pötschke, P.; Henning, F.
Conference Paper
2014Rapid deployable ballistic barriers based on airbag systems
Roussel Garcia, Raquel; Bernewitz, Johanna; Neutz, Jochen
Conference Paper
2014Reactions of magnesium in different atmospheres
Rozincsak, Linda; Eisenreich, Norbert; Neutz, Jochen; Roussel Garcia, Raquel
Conference Paper
2014Reactions of metal carbides in different atmospheres
Rozincsak, Linda; Eisenreich, Norbert; Neutz, Jochen; Roussel Garcia, Raquel
Conference Paper
2014Recent achievements in kinetic modeling of stabilizer consumption in NC-based propellants
Bohn, M.A.
Conference Paper
2014Recent achievements in kinetic modelling of stabilizer consumption and molar mass degradation in NC-based propellants
Bohn, Manfred A.
Conference Paper
2014Recent improvements within the testing and certification process of explosive detection systems as basis of a harmonized european test regime
Röseling, D.; Schnürer, F.; Heil, M.; Rieger, M.; Ulrich, C.; Krause, H.
Conference Paper
2014Recovering carbon fibers
Emmerich, Rudolf; Kuppinger, Jan
Journal Article
2014Recycling von Weichschaumpolyurethan aus Flugzeugsitzen mittels Glykolyse
Hanich, Ronny
Master Thesis
2014Reibenergieverteilungen von Mahlkugelkontakten
Köster, Alexander; Scherge, Matthias; Teipel, Ulrich
Journal Article
2014Reibenergieverteilungen von Mahlkugelkontakten
Köster, A.; Scherge, M.; Teipel, U.
Conference Paper
2014Simulation of propellant combustion using the ICT-cellular-combustion-algorithm (ICCA)
Wurster, S.; Fischer, T.S.
Conference Paper
2014Size effects of self-assembled block copolymer spherical micelles and vesicles on cellular uptake in human colon carcinoma cells
Chang, T.; Lord, M.S.; Bergmann, B.; Macmillan, A.; Stenzel, M.H.
Journal Article
2014Size Matters! On the way to ionic liquid systems without ion pairing
Rupp, A.; Roznyatovskaya, N.; Scherer, H.; Beichel, W.; Klose, P.; Sturm, C.; Hoffmann, A.; Tübke, J.; Koslowski, T.; Krossing, I.
Journal Article
2014Snow as a paradigm for acoustic absorbers
Maysenhölder, Waldemar; Mikonsaari, Irma
Conference Paper
2014Solid state electrolytes for ambient and middle temperature next generation electrochemical storage systems
Ahlbrecht, K.; Holzapfel, M.; Tübke, J.; Hoffmann, M.J.
Conference Paper
2014Spectroscopy of pyrotechnic tracer compositions under different pressure
Weiser, Volker; Knapp, Sebastian; Roth, E.; Raab, Angelika; Kelzenberg, Stefan; Cegiel, D.
Conference Paper
2014Studies on preventing Li dendrite formation in Li-S batteries by using pre-lithiated Si microwire anodes
Hagen, M.; Quiroga-González, E.; Dörfler, S.; Fahrer, G.; Tübke, J.; Hoffmann, M.J.; Althues, H.; Speck, R.; Krampfert, M.; Kaskel, S.; Föll, H.
Journal Article
2014Synthesis and characterization of polymers with phosphorus side chains
Eisenblätter, Jördis
Dissertation
2014Synthesis and properties of random co-polymer poly-(GA/BAMO) as energetic binder
Keicher, Thomas; Janitschek, Wieland; Schaller, Uwe; Krause, Horst; Kaiser, M.
Conference Paper
2014Synthesis and test of suitable adsorbers for selectively trapping and detecting explosives and improvised explosives precursors from air
Bunte, G.; Hürttlen, J.; Heil, M.; Rieger, M.; Krause, H.
Conference Paper
2014Synthesis of polymer particles and capsules employing microfluidic techniques
Boskovic, D.; Loebbecke, S.
Journal Article
2014Thermal decomposition of nano-structured carbon
Eisenreich, Norbert; Kelzenberg, Stefan; Knapp, Sebastian; Koleczko, Andreas; Schuppler, Heike; Weiser, Volker
Conference Paper
2014Thermoplastische Faserverbundkunststoffe - Vom Tape zum strukturellen Bauteil am Beispiel eines Versteifungsinlays für eine LKW-Staufachklappe
Baumgärtner, S.; Henning, F.; Joppich, T.; Hangs, B.; Huber, T.; Manger, F.; Begert, M.; Reif, M.
Conference Paper
2014Trikresylphoshat-freies Öl, Schmierstoff oder Turbinenöl
Schmid, Helmut; Eckl, Wilhelm; Moriske, Heinz-Jörn
Patent
2014Umweltfreundliche, wärmeformbeständige Profile
Moser, Kevin; Holzer, Andrei; Bergmann, Björn
Journal Article
2014Use of unidirectional thermoplastic composite tapes to reduce mass & improve performance of a steel doorframe support on a commercial truck
Clark, G.; Reif, M.; Begert, M.; Gerster, M.; Schneider, E.; Joppich, T.; Baumgärtner, S.
Conference Paper
2014Variation der mechanischen Eigenschaften von Sprühgranulaten über die innere Struktur
Eckhard, Susanna; Fries, Manfred; Teipel, Ulrich
Journal Article
2014Verfahren und Vorrichtung zur Bestimmung eines Rohstoffgehaltes in einem Gebäude
Woidasky, Jörg; Sevilmis, Neyir; Ritz, Martin
Patent
2014Verfahren und Vorrichtung zur Ermittlung der Zündgrenzen von Gasgemischen
Müller, Dominik; Abert, Michael; Berger, Thomas; Krampfert, Matthias; Bayha, Thomas
Patent
2014Verfahren zur Herstellung eines elektrisch leitfähigen Kunststoff-Werkstoffes und dessen Verwendung sowie solchermaßen hergestellter Kunststoff-Werkstoff
Diemert, Jan; Hübner, Christof; Sathyanarayana, Shyam; Weiss, Patrick; Just, Daniel
Patent
2014Verfahren zur Herstellung eines Polyurethan-Blockschaumstoffes
Hohenhorst, Manfred; Kugler, Michael; Fehrenbacher, Ulrich; Stricker, Matthias; Schäfer, Kai; Giesker, Christian
Patent
2014Verfahren zur Rückgewinnung von Fasern aus Bauteilen oder Produkten aus Kunststoff-Faserverbundmaterialien
Woidasky, Jörg; Seiler, Elisa
Patent
2014Vorrichtung zur Herstellung von thermoplastischen und/oder thermoelastischen Polymer-Formteilen
Diemert, Jan; Huber, Timo; Roch, Alexander; Anselment, Christian
Patent
2014Wegweisend: Fertigung thermoplastischer und duromerer Bauteile aus Faserverbundkunststoffen
Baumgärtner, Sebastian; Joppich, Tobias
Book Article
2014Wertschöpfungspotenziale im Leichtbau und deren Bedeutung für Baden-Württemberg
: Thielmann, Axel; Lerch, Christian; Seeliger, Wolfgang; Bele, Günther; Zanker, Christoph; Jäger, Angela; Keckl, Christoph; Kuppinger, Jan; Henning, Frank; Stroka, Michael (Red.); Schneider, Marco (Red.); Birenbaum, Christoph (Red.); Fleischer, Jürgen; Lanza, Gisela; Baumann, Florian; Kopf, Robin; Krämer, Alexandra; Wagner, Henning
Study
2014Wind Blades Using Cost-Effective Advanced Lightweight Design
Heinzle, V.; Rapp, F.; Huber, T.; Knudsen, H.
Conference Paper
2014X-ray-absorption measurements of explosives and the effective atomic number ZEFF
Herrmann, Michael; Förter-Barth, Ulrich; Heintz, Thomas; Röseling, Dirk; Krause, H.
Conference Paper
2014Zur Energie der Mahlkörperreibung
Köster, A.; Scherge, M.; Teipel, U.
Journal Article